All of lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot] [PATCH 1/2] PowerPC: Update MIP405/MIP405T to use Kconfig better
@ 2016-09-20  2:05 Tom Rini
  2016-09-20  2:05 ` [U-Boot] [PATCH 2/2] PowerPC: Update last users of CONFIG_ISO_STRING to Kconfig Tom Rini
  2016-09-21 15:30 ` [U-Boot] [PATCH 1/2] PowerPC: Update MIP405/MIP405T to use Kconfig better Tom Rini
  0 siblings, 2 replies; 4+ messages in thread
From: Tom Rini @ 2016-09-20  2:05 UTC (permalink / raw)
  To: u-boot

Convert CONFIG_MIP405T from SYS_EXTRA_OPTIONS to a real config

There are two boards, MIP405 and MIP405T that have a few differences.
Start by checking for CONFIG_TARGET_MIP405.  Then introduce
CONFIG_TARGET_MIP405T and use that not CONFIG_MIP405T.  Next, convert
also convert the usage of CONFIG_ISO_STRING to be based on Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
---
 arch/powerpc/cpu/ppc4xx/4xx_pci.c  |  4 ++--
 arch/powerpc/cpu/ppc4xx/Kconfig    |  3 +++
 arch/powerpc/cpu/ppc4xx/resetvec.S |  2 +-
 board/mpl/common/common_util.c     | 12 ++++++------
 board/mpl/common/common_util.h     |  2 +-
 board/mpl/common/pci_parts.h       |  4 ++--
 board/mpl/mip405/Kconfig           |  7 ++++++-
 board/mpl/mip405/mip405.c          | 14 +++++++-------
 board/mpl/pati/pati.h              |  2 +-
 configs/MIP405T_defconfig          |  3 +--
 include/configs/MIP405.h           | 18 +++---------------
 scripts/config_whitelist.txt       |  2 --
 12 files changed, 33 insertions(+), 40 deletions(-)

diff --git a/arch/powerpc/cpu/ppc4xx/4xx_pci.c b/arch/powerpc/cpu/ppc4xx/4xx_pci.c
index 30e6c65..314cfdc 100644
--- a/arch/powerpc/cpu/ppc4xx/4xx_pci.c
+++ b/arch/powerpc/cpu/ppc4xx/4xx_pci.c
@@ -118,7 +118,7 @@ void pci_405gp_init(struct pci_controller *hose)
 #endif
 	unsigned long ptmla[2]    = {CONFIG_SYS_PCI_PTM1LA, CONFIG_SYS_PCI_PTM2LA};
 	unsigned long ptmms[2]    = {CONFIG_SYS_PCI_PTM1MS, CONFIG_SYS_PCI_PTM2MS};
-#if defined(CONFIG_PIP405) || defined (CONFIG_MIP405)
+#if defined(CONFIG_PIP405) || defined (CONFIG_TARGET_MIP405)
 	unsigned long pmmla[3]    = {0x80000000, 0xA0000000, 0};
 	unsigned long pmmma[3]    = {0xE0000001, 0xE0000001, 0};
 	unsigned long pmmpcila[3] = {0x80000000, 0x00000000, 0};
@@ -408,7 +408,7 @@ void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev,
 	pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
 }
 
-#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405))
+#if !(defined(CONFIG_PIP405) || defined (CONFIG_TARGET_MIP405))
 
 /*
  *As is these functs get called out of flash Not a horrible
diff --git a/arch/powerpc/cpu/ppc4xx/Kconfig b/arch/powerpc/cpu/ppc4xx/Kconfig
index 92a330d..a6066ef 100644
--- a/arch/powerpc/cpu/ppc4xx/Kconfig
+++ b/arch/powerpc/cpu/ppc4xx/Kconfig
@@ -104,6 +104,9 @@ config TARGET_ICON
 config TARGET_MIP405
 	bool "Support MIP405"
 
+config TARGET_MIP405T
+	bool "Support MIP405T"
+
 config TARGET_PIP405
 	bool "Support PIP405"
 
diff --git a/arch/powerpc/cpu/ppc4xx/resetvec.S b/arch/powerpc/cpu/ppc4xx/resetvec.S
index b3308bd..4144837 100644
--- a/arch/powerpc/cpu/ppc4xx/resetvec.S
+++ b/arch/powerpc/cpu/ppc4xx/resetvec.S
@@ -4,7 +4,7 @@
 #if defined(CONFIG_440)
 	b _start_440
 #else
-#if defined(CONFIG_BOOT_PCI) && defined(CONFIG_MIP405)
+#if defined(CONFIG_BOOT_PCI) && defined(CONFIG_TARGET_MIP405)
 	b _start_pci
 #else
 	b _start
diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index 2262175..c1a4b62 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -20,7 +20,7 @@
 #include "../pip405/pip405.h"
 #include <asm/4xx_pci.h>
 #endif
-#ifdef CONFIG_MIP405
+#ifdef CONFIG_TARGET_MIP405
 #include "../mip405/mip405.h"
 #include <asm/4xx_pci.h>
 #endif
@@ -36,7 +36,7 @@ extern int mem_test(ulong start, ulong ramsize, int quiet);
 #define I2C_BACKUP_ADDR 0x7C00		/* 0x200 bytes for backup */
 #define IMAGE_SIZE CONFIG_SYS_MONITOR_LEN	/* ugly, but it works for now */
 
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
+#if defined(CONFIG_PIP405) || defined(CONFIG_TARGET_MIP405)
 /*-----------------------------------------------------------------------
  * On PIP/MIP405 we have 3 (4) possible boot mode
  *
@@ -116,7 +116,7 @@ void setup_cs_reloc(void)
 		mtdcr(EBC0_CFGDATA, FLASH_CR_B);
 	}
 }
-#endif /* #if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) */
+#endif /* #if defined(CONFIG_PIP405) || defined(CONFIG_TARGET_MIP405) */
 
 #ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
 /* adjust flash start and protection info */
@@ -190,12 +190,12 @@ mpl_prg(uchar *src, ulong size)
 #if defined(CONFIG_PATI)
 	int start_sect;
 #endif
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) || defined(CONFIG_PATI)
+#if defined(CONFIG_PIP405) || defined(CONFIG_TARGET_MIP405) || defined(CONFIG_PATI)
 	char *copystr = (char *)src;
 	ulong *magic = (ulong *)src;
 #endif
 
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) || defined(CONFIG_PATI)
+#if defined(CONFIG_PIP405) || defined(CONFIG_TARGET_MIP405) || defined(CONFIG_PATI)
 	if (uimage_to_cpu (magic[0]) != IH_MAGIC) {
 		puts("Bad Magic number\n");
 		return -1;
@@ -701,7 +701,7 @@ void video_get_info_str (int line_number, char *info)
 			strcpy(buf,"### No HW ID - assuming PIP405");
 		}
 #endif
-#ifdef CONFIG_MIP405
+#ifdef CONFIG_TARGET_MIP405
 		if (!s || strncmp (s, "MIP405", 6)) {
 			strcpy(buf,"### No HW ID - assuming MIP405");
 		}
diff --git a/board/mpl/common/common_util.h b/board/mpl/common/common_util.h
index e81ee35..bd9d3b5 100644
--- a/board/mpl/common/common_util.h
+++ b/board/mpl/common/common_util.h
@@ -17,7 +17,7 @@ extern flash_info_t flash_info[];	/* info for FLASH chips */
 
 void get_backup_values(backup_t *buf);
 
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
+#if defined(CONFIG_PIP405) || defined(CONFIG_TARGET_MIP405)
 #define BOOT_MPS	0x01
 #define BOOT_PCI	0x02
 int get_boot_mode(void);
diff --git a/board/mpl/common/pci_parts.h b/board/mpl/common/pci_parts.h
index 4193e92..75e8cae 100644
--- a/board/mpl/common/pci_parts.h
+++ b/board/mpl/common/pci_parts.h
@@ -91,7 +91,7 @@ static struct pci_pip405_config_entry piix4_isa_bridge_f0[] = {
 static struct pci_pip405_config_entry piix4_ide_cntrl_f1[] = {
 	{PCI_CFG_PIIX4_BMIBA,	0x0001000,	4}, /* set BMI to a valid address */
 	{PCI_COMMAND,		0x0001,		2}, /* enable IO access	*/
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
 	{PCI_CFG_PIIX4_IDETIM,	0x80008000,	4}, /* enable Both IDE channels	*/
 #else
 	{PCI_CFG_PIIX4_IDETIM,	0x00008000,	4}, /* enable IDE channel0	*/
@@ -101,7 +101,7 @@ static struct pci_pip405_config_entry piix4_ide_cntrl_f1[] = {
 
 /* PIIX4 USB Controller Function 2 */
 static struct pci_pip405_config_entry piix4_usb_cntrl_f2[] = {
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
 	{PCI_INTERRUPT_LINE,	31,		1}, /* Int vector = 31		*/
 	{PCI_BASE_ADDRESS_4,	0x0000E001,	4}, /* Set IO Address to 0xe000 to 0xe01F */
 	{PCI_LATENCY_TIMER,	0x80,		1}, /* Latency Timer 0x80	*/
diff --git a/board/mpl/mip405/Kconfig b/board/mpl/mip405/Kconfig
index 48ba91a..e003a43 100644
--- a/board/mpl/mip405/Kconfig
+++ b/board/mpl/mip405/Kconfig
@@ -1,4 +1,4 @@
-if TARGET_MIP405
+if TARGET_MIP405 || TARGET_MIP405T
 
 config SYS_BOARD
 	default "mip405"
@@ -9,4 +9,9 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "MIP405"
 
+config ISO_STRING
+	string
+	default "MEV-10082-001" if TARGET_MIP405T
+	default "MEV-10072-001" if TARGET_MIP405
+
 endif
diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c
index 4a0d696..8b9892b 100644
--- a/board/mpl/mip405/mip405.c
+++ b/board/mpl/mip405/mip405.c
@@ -92,7 +92,7 @@ typedef struct {
 	unsigned char sz;		/* log binary => Size = (4MByte<<sz) 5 = 128, 4 = 64, 3 = 32, 2 = 16, 1=8 */
 	unsigned char ecc;		/* if true, ecc is enabled */
 } sdram_t;
-#if defined(CONFIG_MIP405T)
+#if defined(CONFIG_TARGET_MIP405T)
 const sdram_t sdram_table[] = {
 	{ 0x0F,	/* MIP405T Rev A, 64MByte -1 Board */
 		3,	/* Case Latenty = 3 */
@@ -168,7 +168,7 @@ const sdram_t sdram_table[] = {
 	  0xff,
 	  0xff }
 };
-#endif /*CONFIG_MIP405T */
+#endif /*CONFIG_TARGET_MIP405T */
 void SDRAM_err (const char *s)
 {
 #ifndef SDRAM_DEBUG
@@ -262,7 +262,7 @@ int init_sdram (void)
 #endif
 	/* check board */
 	bc = in8 (PLD_PART_REG);
-#if defined(CONFIG_MIP405T)
+#if defined(CONFIG_TARGET_MIP405T)
 	if((bc & 0x80)==0)
 		SDRAM_err ("U-Boot configured for a MIP405T not for a MIP405!!!\n");
 #else
@@ -543,7 +543,7 @@ void ide_set_reset (int idereset)
 
 void get_pcbrev_var(unsigned char *pcbrev, unsigned char *var)
 {
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
 	unsigned char bc,rc,tmp;
 	int i;
 
@@ -575,7 +575,7 @@ void get_pcbrev_var(unsigned char *pcbrev, unsigned char *var)
  * Check Board Identity:
  */
 /* serial String: "MIP405_1000" OR "MIP405T_1000" */
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
 #define BOARD_NAME	"MIP405"
 #else
 #define BOARD_NAME	"MIP405T"
@@ -777,7 +777,7 @@ void print_mip405_info (void)
 			(cfg >> 1) & 0x1, (cfg >> 2) & 0x1, (cfg >> 3) & 0x1);
 	printf ("User LED %s\n", (com_mode & 0x4) ? "on" : "off");
 	printf ("UART Clocks %d\n", (com_mode >> 4) & 0x3);
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
 	printf ("User Config Switch %d %d %d %d %d %d %d %d\n",
 			(ext) & 0x1, (ext >> 1) & 0x1, (ext >> 2) & 0x1,
 			(ext >> 3) & 0x1, (ext >> 4) & 0x1, (ext >> 5) & 0x1,
@@ -793,7 +793,7 @@ void print_mip405_info (void)
 	printf ("IDE Reset %s\n", (ext & 0x01) ? "asserted" : "not asserted");
 	printf ("IRQs:\n");
 	printf ("  PIIX INTR: %s\n", (irq_reg & 0x80) ? "inactive" : "active");
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
 	printf ("  UART0 IRQ: %s\n", (irq_reg & 0x40) ? "inactive" : "active");
 	printf ("  UART1 IRQ: %s\n", (irq_reg & 0x20) ? "inactive" : "active");
 #endif
diff --git a/board/mpl/pati/pati.h b/board/mpl/pati/pati.h
index 2600bba..66760d7 100644
--- a/board/mpl/pati/pati.h
+++ b/board/mpl/pati/pati.h
@@ -201,7 +201,7 @@
 #define PCI_VENDOR_ID_MPL	0x18E6
 #define PCI_DEVICE_ID_PATI	0x00DA
 
-#if defined(CONFIG_MIP405)
+#if defined(CONFIG_TARGET_MIP405)
 #define PATI_FIRMWARE_START_OFFSET	0x00300000
 #define PATI_ISO_STRING  "MEV-10084-001"
 #endif
diff --git a/configs/MIP405T_defconfig b/configs/MIP405T_defconfig
index 360170e..e5910cd 100644
--- a/configs/MIP405T_defconfig
+++ b/configs/MIP405T_defconfig
@@ -1,8 +1,7 @@
 CONFIG_PPC=y
 CONFIG_IDENT_STRING="\n(c) 2003 by MPL AG Switzerland, MEV-10082-001 released"
 CONFIG_4xx=y
-CONFIG_TARGET_MIP405=y
-CONFIG_SYS_EXTRA_OPTIONS="MIP405T"
+CONFIG_TARGET_MIP405T=y
 CONFIG_BOOTDELAY=5
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_I2C=y
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index c0a1cb4..6f7d49b 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -17,7 +17,6 @@
  * (easy to change)
  ***********************************************************/
 #define CONFIG_405GP		1	/* This is a PPC405 CPU		*/
-#define CONFIG_MIP405		1	/* ...on a MIP405 board		*/
 
 #define	CONFIG_SYS_TEXT_BASE	0xFFF80000
 
@@ -57,7 +56,7 @@
 #define CONFIG_CMD_SAVES
 #define CONFIG_CMD_BSP
 
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
 #endif
 
 /**************************************************************
@@ -312,7 +311,7 @@
 /************************************************************
  * IDE/ATA stuff
  ************************************************************/
-#if defined(CONFIG_MIP405T)
+#if defined(CONFIG_TARGET_MIP405T)
 #define CONFIG_SYS_IDE_MAXBUS		1   /* MIP405T has only one IDE bus	*/
 #else
 #define CONFIG_SYS_IDE_MAXBUS		2   /* max. 2 IDE busses	*/
@@ -358,7 +357,7 @@
 /************************************************************
  * USB support EXPERIMENTAL
  ************************************************************/
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
 #define CONFIG_USB_UHCI
 #define CONFIG_USB_KEYBOARD
 
@@ -377,15 +376,4 @@
  ************************************************************/
 #define CONFIG_BZIP2		1
 
-/************************************************************
- * Ident
- ************************************************************/
-
-#define VERSION_TAG "released"
-#if !defined(CONFIG_MIP405T)
-#define CONFIG_ISO_STRING "MEV-10072-001"
-#else
-#define CONFIG_ISO_STRING "MEV-10082-001"
-#endif
-
 #endif	/* __CONFIG_H */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 05f663f..090c0a2 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -3086,8 +3086,6 @@ CONFIG_MII_DEFAULT_TSEC
 CONFIG_MII_INIT
 CONFIG_MII_SUPPRESS_PREAMBLE
 CONFIG_MINIFAP
-CONFIG_MIP405
-CONFIG_MIP405T
 CONFIG_MIPS_HUGE_TLB_SUPPORT
 CONFIG_MIPS_MT_FPAFF
 CONFIG_MIRQ_EN
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 4+ messages in thread
* [U-Boot] [PATCH 2/2] PowerPC: Update last users of CONFIG_ISO_STRING to Kconfig
  2016-09-20  2:05 [U-Boot] [PATCH 1/2] PowerPC: Update MIP405/MIP405T to use Kconfig better Tom Rini
@ 2016-09-20  2:05 ` Tom Rini
  2016-09-21 15:30   ` Tom Rini
  2016-09-21 15:30 ` [U-Boot] [PATCH 1/2] PowerPC: Update MIP405/MIP405T to use Kconfig better Tom Rini
  1 sibling, 1 reply; 4+ messages in thread
From: Tom Rini @ 2016-09-20  2:05 UTC (permalink / raw)
  To: u-boot

There are a few boards that use CONFIG_ISO_STRING as part of a sanity
check during firmware update at run time.  Move this string to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
---
 board/mpl/pati/Kconfig       | 3 +++
 board/mpl/pati/pati.h        | 1 -
 board/mpl/pip405/Kconfig     | 3 +++
 include/configs/PATI.h       | 3 ---
 include/configs/PIP405.h     | 6 ------
 scripts/config_whitelist.txt | 1 -
 6 files changed, 6 insertions(+), 11 deletions(-)

diff --git a/board/mpl/pati/Kconfig b/board/mpl/pati/Kconfig
index b141da3..0eeaf70 100644
--- a/board/mpl/pati/Kconfig
+++ b/board/mpl/pati/Kconfig
@@ -9,4 +9,7 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "PATI"
 
+config ISO_STRING
+	string
+	default "MEV-10084-001"
 endif
diff --git a/board/mpl/pati/pati.h b/board/mpl/pati/pati.h
index 66760d7..4fd345b 100644
--- a/board/mpl/pati/pati.h
+++ b/board/mpl/pati/pati.h
@@ -203,7 +203,6 @@
 
 #if defined(CONFIG_TARGET_MIP405)
 #define PATI_FIRMWARE_START_OFFSET	0x00300000
-#define PATI_ISO_STRING  "MEV-10084-001"
 #endif
 
 #define PATI_ENDIAN_MODE	0x3E
diff --git a/board/mpl/pip405/Kconfig b/board/mpl/pip405/Kconfig
index f485367..e7ae6af 100644
--- a/board/mpl/pip405/Kconfig
+++ b/board/mpl/pip405/Kconfig
@@ -9,4 +9,7 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "PIP405"
 
+config ISO_STRING
+	string
+	default "MEV-10066-001"
 endif
diff --git a/include/configs/PATI.h b/include/configs/PATI.h
index 880246e..ebabdff 100644
--- a/include/configs/PATI.h
+++ b/include/configs/PATI.h
@@ -252,7 +252,4 @@
  */
 #define CONFIG_SYS_DER			0x00000000
 
-#define VERSION_TAG "released"
-#define CONFIG_ISO_STRING "MEV-10084-001"
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 9ace443..7d08f0c 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -333,10 +333,4 @@
  ************************************************************/
 #define CONFIG_BZIP2		1
 
-/************************************************************
- * Ident
- ************************************************************/
-#define VERSION_TAG "released"
-#define CONFIG_ISO_STRING "MEV-10066-001"
-
 #endif	/* __CONFIG_H */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 090c0a2..cb4516f 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1728,7 +1728,6 @@ CONFIG_IRAM_STACK
 CONFIG_IRAM_TOP
 CONFIG_IRDA_BASE
 CONFIG_ISO_PARTITION
-CONFIG_ISO_STRING
 CONFIG_ISP1362_USB
 CONFIG_IS_
 CONFIG_IS_BUILTIN
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 4+ messages in thread
* [U-Boot] [PATCH 1/2] PowerPC: Update MIP405/MIP405T to use Kconfig better
  2016-09-20  2:05 [U-Boot] [PATCH 1/2] PowerPC: Update MIP405/MIP405T to use Kconfig better Tom Rini
  2016-09-20  2:05 ` [U-Boot] [PATCH 2/2] PowerPC: Update last users of CONFIG_ISO_STRING to Kconfig Tom Rini
@ 2016-09-21 15:30 ` Tom Rini
  1 sibling, 0 replies; 4+ messages in thread
From: Tom Rini @ 2016-09-21 15:30 UTC (permalink / raw)
  To: u-boot

On Mon, Sep 19, 2016 at 10:05:44PM -0400, Tom Rini wrote:

> Convert CONFIG_MIP405T from SYS_EXTRA_OPTIONS to a real config
> 
> There are two boards, MIP405 and MIP405T that have a few differences.
> Start by checking for CONFIG_TARGET_MIP405.  Then introduce
> CONFIG_TARGET_MIP405T and use that not CONFIG_MIP405T.  Next, convert
> also convert the usage of CONFIG_ISO_STRING to be based on Kconfig.
> 
> Signed-off-by: Tom Rini <trini@konsulko.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160921/33efabe8/attachment.sig>

^ permalink raw reply	[flat|nested] 4+ messages in thread
* [U-Boot] [PATCH 2/2] PowerPC: Update last users of CONFIG_ISO_STRING to Kconfig
  2016-09-20  2:05 ` [U-Boot] [PATCH 2/2] PowerPC: Update last users of CONFIG_ISO_STRING to Kconfig Tom Rini
@ 2016-09-21 15:30   ` Tom Rini
  0 siblings, 0 replies; 4+ messages in thread
From: Tom Rini @ 2016-09-21 15:30 UTC (permalink / raw)
  To: u-boot

On Mon, Sep 19, 2016 at 10:05:45PM -0400, Tom Rini wrote:

> There are a few boards that use CONFIG_ISO_STRING as part of a sanity
> check during firmware update at run time.  Move this string to Kconfig.
> 
> Signed-off-by: Tom Rini <trini@konsulko.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160921/f3c7e2b4/attachment.sig>

^ permalink raw reply	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-09-21 15:30 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-20  2:05 [U-Boot] [PATCH 1/2] PowerPC: Update MIP405/MIP405T to use Kconfig better Tom Rini
2016-09-20  2:05 ` [U-Boot] [PATCH 2/2] PowerPC: Update last users of CONFIG_ISO_STRING to Kconfig Tom Rini
2016-09-21 15:30   ` Tom Rini
2016-09-21 15:30 ` [U-Boot] [PATCH 1/2] PowerPC: Update MIP405/MIP405T to use Kconfig better Tom Rini

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.