From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/9] MIPS: improve start.S and add exception support
Date: Sun, 25 Sep 2016 20:05:23 +0200 [thread overview]
Message-ID: <20160925180532.19800-1-daniel.schwierzeck@gmail.com> (raw)
Fix and optinmize initialization of cp0 registers. Also add
the possibilty to setup the initial stack and global data in
SRAM to provide a C environment for lowlevel_init(). This
could be used on the QCA ath79 platform to rewrite and
optimize the low-level init code.
Add support for a dynamic exception vectors in RAM and add
initial exception handlers. The general exception handler
prints an oops message similar to Linux kernel and then hangs.
The EJTAG exception handler checks for SDBBP and delegates to
the SDBBP handler if necessary. Otherwise the debug mode
will be simply exited. The SDBBP handler currently only
prints the content of registers c0_depc and c0_debug. This
could be extended in the future to handle semi-hosting
according to the MIPS UHI specification.
This patch series is also available at:
git://git.denx.de/u-boot-mips.git mips_rework_start_v1
Daniel Schwierzeck (9):
MIPS: make inclusion of ROM exception vectors configurable
MIPS: fix ROM exception vectors
MIPS: fix iand optimize setup of CP0 registers
MIPS: factor out code for initial stack and global data
MIPS: add possibility to setup initial stack and global data in SRAM
MIPS: add asm-offsets for struct pt_regs
MIPS: reserve space for exception vectors
MIPS: add handling for generic and EJTAG exceptions
common/board_f: enable initr_trap for MIPS
arch/mips/Kconfig | 32 ++++++
arch/mips/cpu/start.S | 165 +++++++++++++++++----------
arch/mips/include/asm/asm-offsets.h | 5 +
arch/mips/include/asm/mipsregs.h | 1 +
arch/mips/include/asm/u-boot-mips.h | 4 +
arch/mips/lib/Makefile | 3 +
arch/mips/lib/asm-offsets.c | 61 ++++++++++
arch/mips/lib/genex.S | 214 ++++++++++++++++++++++++++++++++++++
arch/mips/lib/stack.c | 19 ++++
arch/mips/lib/traps.c | 104 ++++++++++++++++++
arch/mips/mach-ath79/Kconfig | 2 +
arch/mips/mach-pic32/Kconfig | 1 +
common/board_r.c | 4 +-
13 files changed, 552 insertions(+), 63 deletions(-)
create mode 100644 arch/mips/include/asm/asm-offsets.h
create mode 100644 arch/mips/lib/asm-offsets.c
create mode 100644 arch/mips/lib/genex.S
create mode 100644 arch/mips/lib/stack.c
create mode 100644 arch/mips/lib/traps.c
--
2.9.3
next reply other threads:[~2016-09-25 18:05 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-25 18:05 Daniel Schwierzeck [this message]
2016-09-25 18:05 ` [U-Boot] [PATCH 1/9] MIPS: make inclusion of ROM exception vectors configurable Daniel Schwierzeck
2016-09-25 18:05 ` [U-Boot] [PATCH 2/9] MIPS: fix ROM exception vectors Daniel Schwierzeck
2016-09-26 7:58 ` Matthew Fortune
2016-09-26 17:45 ` Daniel Schwierzeck
2016-09-26 19:03 ` Matthew Fortune
2016-09-25 18:05 ` [U-Boot] [PATCH 3/9] MIPS: fix iand optimize setup of CP0 registers Daniel Schwierzeck
2016-09-25 18:05 ` [U-Boot] [PATCH 4/9] MIPS: factor out code for initial stack and global data Daniel Schwierzeck
2016-09-25 18:05 ` [U-Boot] [PATCH 5/9] MIPS: add possibility to setup initial stack and global data in SRAM Daniel Schwierzeck
2016-09-25 18:05 ` [U-Boot] [PATCH 6/9] MIPS: add asm-offsets for struct pt_regs Daniel Schwierzeck
2016-09-25 18:05 ` [U-Boot] [PATCH 7/9] MIPS: reserve space for exception vectors Daniel Schwierzeck
2016-09-25 18:05 ` [U-Boot] [PATCH 8/9] MIPS: add handling for generic and EJTAG exceptions Daniel Schwierzeck
2016-09-26 10:29 ` Paul Burton
2016-09-26 17:41 ` Daniel Schwierzeck
2016-09-26 18:15 ` Paul Burton
2016-09-25 18:05 ` [U-Boot] [PATCH 9/9] common/board_f: enable initr_trap for MIPS Daniel Schwierzeck
2016-09-27 0:34 ` Simon Glass
2016-09-26 7:52 ` [U-Boot] [PATCH 0/9] MIPS: improve start.S and add exception support Matthew Fortune
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160925180532.19800-1-daniel.schwierzeck@gmail.com \
--to=daniel.schwierzeck@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.