* [PATCH v3 0/2] drm/panel: simple: add support for Sharp LQ150X1LG11 panels @ 2016-09-26 22:27 ` Peter Rosin 0 siblings, 0 replies; 10+ messages in thread From: Peter Rosin @ 2016-09-26 22:27 UTC (permalink / raw) To: open list Cc: Peter Rosin, Thierry Reding, David Airlie, Rob Herring, Mark Rutland, dri-devel, devicetree, Gustaf Lindström Hi! I'm back with a new attempt at getting this panel upstream. This time with the bindings in a separate commit, as I hear that is preferred. I think I covered all the pins on the panel... Cheers, Peter Gustaf Lindström (1): drm/panel: simple: add support for Sharp LQ150X1LG11 panels Peter Rosin (1): dt-bindings: display: Add Sharp LQ150X1LG11 panel binding .../bindings/display/panel/sharp,lq150x1lg11.txt | 36 ++++++++++++++++++++++ drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++ 2 files changed, 63 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt -- 2.1.4 ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3 0/2] drm/panel: simple: add support for Sharp LQ150X1LG11 panels @ 2016-09-26 22:27 ` Peter Rosin 0 siblings, 0 replies; 10+ messages in thread From: Peter Rosin @ 2016-09-26 22:27 UTC (permalink / raw) To: open list Cc: Peter Rosin, Thierry Reding, David Airlie, Rob Herring, Mark Rutland, dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW, devicetree-u79uwXL29TY76Z2rM5mHXA, Gustaf Lindström Hi! I'm back with a new attempt at getting this panel upstream. This time with the bindings in a separate commit, as I hear that is preferred. I think I covered all the pins on the panel... Cheers, Peter Gustaf Lindström (1): drm/panel: simple: add support for Sharp LQ150X1LG11 panels Peter Rosin (1): dt-bindings: display: Add Sharp LQ150X1LG11 panel binding .../bindings/display/panel/sharp,lq150x1lg11.txt | 36 ++++++++++++++++++++++ drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++ 2 files changed, 63 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3 1/2] dt-bindings: display: Add Sharp LQ150X1LG11 panel binding @ 2016-09-26 22:27 ` Peter Rosin 0 siblings, 0 replies; 10+ messages in thread From: Peter Rosin @ 2016-09-26 22:27 UTC (permalink / raw) To: open list Cc: Peter Rosin, Thierry Reding, David Airlie, Rob Herring, Mark Rutland, dri-devel, devicetree, Gustaf Lindström The Sharp 15" LQ150X1LG11 panel is an XGA TFT LCD panel. Signed-off-by: Peter Rosin <peda@axentia.se> --- .../bindings/display/panel/sharp,lq150x1lg11.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt new file mode 100644 index 000000000000..715ff7e332f2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt @@ -0,0 +1,36 @@ +Sharp 15" LQ150X1LG11 XGA TFT LCD panel + +Required properties: +- compatible: should be "sharp,lq150x1lg11" +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) + +Optional properties: +- backlight: phandle of the backlight device +- rlud-gpios: a single GPIO for the RL/UD (rotate 180 degrees) pin. +- lvds-gpios: a single GPIO for the SELLVDS pin. + +If lrud-gpios and/or ldvs-gpios are not specified, the RL/UD and/or SELLVDS +pins are assumed to be handled appropriately by the hardware. + +Example: + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 100000>; /* VBR */ + + brightness-levels = <0 20 40 60 80 100>; + default-brightness-level = <2>; + + power-supply = <&vdd_12v_reg>; /* VDD */ + enable-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; /* XSTABY */ + }; + + panel { + compatible = "sharp,lq150x1lg11"; + + power-supply = <&vcc_3v3_reg>; /* VCC */ + + backlight = <&backlight>; + rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* RL/UD */ + lvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */ + }; -- 2.1.4 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v3 1/2] dt-bindings: display: Add Sharp LQ150X1LG11 panel binding @ 2016-09-26 22:27 ` Peter Rosin 0 siblings, 0 replies; 10+ messages in thread From: Peter Rosin @ 2016-09-26 22:27 UTC (permalink / raw) To: open list Cc: Peter Rosin, Thierry Reding, David Airlie, Rob Herring, Mark Rutland, dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW, devicetree-u79uwXL29TY76Z2rM5mHXA, Gustaf Lindström The Sharp 15" LQ150X1LG11 panel is an XGA TFT LCD panel. Signed-off-by: Peter Rosin <peda-koto5C5qi+TLoDKTGw+V6w@public.gmane.org> --- .../bindings/display/panel/sharp,lq150x1lg11.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt new file mode 100644 index 000000000000..715ff7e332f2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt @@ -0,0 +1,36 @@ +Sharp 15" LQ150X1LG11 XGA TFT LCD panel + +Required properties: +- compatible: should be "sharp,lq150x1lg11" +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) + +Optional properties: +- backlight: phandle of the backlight device +- rlud-gpios: a single GPIO for the RL/UD (rotate 180 degrees) pin. +- lvds-gpios: a single GPIO for the SELLVDS pin. + +If lrud-gpios and/or ldvs-gpios are not specified, the RL/UD and/or SELLVDS +pins are assumed to be handled appropriately by the hardware. + +Example: + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 100000>; /* VBR */ + + brightness-levels = <0 20 40 60 80 100>; + default-brightness-level = <2>; + + power-supply = <&vdd_12v_reg>; /* VDD */ + enable-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; /* XSTABY */ + }; + + panel { + compatible = "sharp,lq150x1lg11"; + + power-supply = <&vcc_3v3_reg>; /* VCC */ + + backlight = <&backlight>; + rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* RL/UD */ + lvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */ + }; -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v3 1/2] dt-bindings: display: Add Sharp LQ150X1LG11 panel binding 2016-09-26 22:27 ` Peter Rosin @ 2016-10-03 18:46 ` Rob Herring -1 siblings, 0 replies; 10+ messages in thread From: Rob Herring @ 2016-10-03 18:46 UTC (permalink / raw) To: Peter Rosin Cc: open list, Thierry Reding, David Airlie, Mark Rutland, dri-devel, devicetree, Gustaf Lindström On Tue, Sep 27, 2016 at 12:27:11AM +0200, Peter Rosin wrote: > The Sharp 15" LQ150X1LG11 panel is an XGA TFT LCD panel. > > Signed-off-by: Peter Rosin <peda@axentia.se> > --- > .../bindings/display/panel/sharp,lq150x1lg11.txt | 36 ++++++++++++++++++++++ > 1 file changed, 36 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt > > diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt > new file mode 100644 > index 000000000000..715ff7e332f2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt > @@ -0,0 +1,36 @@ > +Sharp 15" LQ150X1LG11 XGA TFT LCD panel > + > +Required properties: > +- compatible: should be "sharp,lq150x1lg11" > +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) Should be named according to the input, so vcc-supply. > + > +Optional properties: > +- backlight: phandle of the backlight device > +- rlud-gpios: a single GPIO for the RL/UD (rotate 180 degrees) pin. > +- lvds-gpios: a single GPIO for the SELLVDS pin. Why not sellvds-gpios? > + > +If lrud-gpios and/or ldvs-gpios are not specified, the RL/UD and/or SELLVDS typos... > +pins are assumed to be handled appropriately by the hardware. > + > +Example: > + > + backlight: backlight { > + compatible = "pwm-backlight"; > + pwms = <&pwm 0 100000>; /* VBR */ > + > + brightness-levels = <0 20 40 60 80 100>; > + default-brightness-level = <2>; > + > + power-supply = <&vdd_12v_reg>; /* VDD */ > + enable-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; /* XSTABY */ > + }; > + > + panel { > + compatible = "sharp,lq150x1lg11"; > + > + power-supply = <&vcc_3v3_reg>; /* VCC */ > + > + backlight = <&backlight>; > + rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* RL/UD */ > + lvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */ > + }; > -- > 2.1.4 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3 1/2] dt-bindings: display: Add Sharp LQ150X1LG11 panel binding @ 2016-10-03 18:46 ` Rob Herring 0 siblings, 0 replies; 10+ messages in thread From: Rob Herring @ 2016-10-03 18:46 UTC (permalink / raw) To: Peter Rosin Cc: Mark Rutland, devicetree, open list, dri-devel, Gustaf Lindström On Tue, Sep 27, 2016 at 12:27:11AM +0200, Peter Rosin wrote: > The Sharp 15" LQ150X1LG11 panel is an XGA TFT LCD panel. > > Signed-off-by: Peter Rosin <peda@axentia.se> > --- > .../bindings/display/panel/sharp,lq150x1lg11.txt | 36 ++++++++++++++++++++++ > 1 file changed, 36 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt > > diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt > new file mode 100644 > index 000000000000..715ff7e332f2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt > @@ -0,0 +1,36 @@ > +Sharp 15" LQ150X1LG11 XGA TFT LCD panel > + > +Required properties: > +- compatible: should be "sharp,lq150x1lg11" > +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) Should be named according to the input, so vcc-supply. > + > +Optional properties: > +- backlight: phandle of the backlight device > +- rlud-gpios: a single GPIO for the RL/UD (rotate 180 degrees) pin. > +- lvds-gpios: a single GPIO for the SELLVDS pin. Why not sellvds-gpios? > + > +If lrud-gpios and/or ldvs-gpios are not specified, the RL/UD and/or SELLVDS typos... > +pins are assumed to be handled appropriately by the hardware. > + > +Example: > + > + backlight: backlight { > + compatible = "pwm-backlight"; > + pwms = <&pwm 0 100000>; /* VBR */ > + > + brightness-levels = <0 20 40 60 80 100>; > + default-brightness-level = <2>; > + > + power-supply = <&vdd_12v_reg>; /* VDD */ > + enable-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; /* XSTABY */ > + }; > + > + panel { > + compatible = "sharp,lq150x1lg11"; > + > + power-supply = <&vcc_3v3_reg>; /* VCC */ > + > + backlight = <&backlight>; > + rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* RL/UD */ > + lvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */ > + }; > -- > 2.1.4 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3 1/2] dt-bindings: display: Add Sharp LQ150X1LG11 panel binding 2016-10-03 18:46 ` Rob Herring @ 2016-10-04 4:58 ` Peter Rosin -1 siblings, 0 replies; 10+ messages in thread From: Peter Rosin @ 2016-10-04 4:58 UTC (permalink / raw) To: Rob Herring Cc: open list, Thierry Reding, David Airlie, Mark Rutland, dri-devel, devicetree, Gustaf Lindström On 2016-10-03 20:46, Rob Herring wrote: > On Tue, Sep 27, 2016 at 12:27:11AM +0200, Peter Rosin wrote: >> The Sharp 15" LQ150X1LG11 panel is an XGA TFT LCD panel. >> >> Signed-off-by: Peter Rosin <peda@axentia.se> >> --- >> .../bindings/display/panel/sharp,lq150x1lg11.txt | 36 ++++++++++++++++++++++ >> 1 file changed, 36 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt >> >> diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt >> new file mode 100644 >> index 000000000000..715ff7e332f2 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt >> @@ -0,0 +1,36 @@ >> +Sharp 15" LQ150X1LG11 XGA TFT LCD panel >> + >> +Required properties: >> +- compatible: should be "sharp,lq150x1lg11" >> +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) > > Should be named according to the input, so vcc-supply. Right, I wanted to do that, but the simple-panel bindings has power-supply as required and I desperately wanted to be compatible in order to make use of the simple-panel driver. That driver does require this entry, so I do not see any way around it. Any advice for this situation? >> + >> +Optional properties: >> +- backlight: phandle of the backlight device >> +- rlud-gpios: a single GPIO for the RL/UD (rotate 180 degrees) pin. >> +- lvds-gpios: a single GPIO for the SELLVDS pin. > > Why not sellvds-gpios? I'll change that in v4. >> + >> +If lrud-gpios and/or ldvs-gpios are not specified, the RL/UD and/or SELLVDS > > typos... Good thing you added the plural, I found s/lrud/rlud/ and s/ldvs/lvds/ Nice catch btw, thanks! >> +pins are assumed to be handled appropriately by the hardware. >> + >> +Example: >> + >> + backlight: backlight { >> + compatible = "pwm-backlight"; >> + pwms = <&pwm 0 100000>; /* VBR */ >> + >> + brightness-levels = <0 20 40 60 80 100>; >> + default-brightness-level = <2>; >> + >> + power-supply = <&vdd_12v_reg>; /* VDD */ >> + enable-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; /* XSTABY */ >> + }; >> + >> + panel { >> + compatible = "sharp,lq150x1lg11"; >> + >> + power-supply = <&vcc_3v3_reg>; /* VCC */ >> + >> + backlight = <&backlight>; >> + rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* RL/UD */ >> + lvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */ >> + }; >> -- >> 2.1.4 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe devicetree" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3 1/2] dt-bindings: display: Add Sharp LQ150X1LG11 panel binding @ 2016-10-04 4:58 ` Peter Rosin 0 siblings, 0 replies; 10+ messages in thread From: Peter Rosin @ 2016-10-04 4:58 UTC (permalink / raw) To: Rob Herring Cc: Mark Rutland, devicetree, open list, dri-devel, Gustaf Lindström On 2016-10-03 20:46, Rob Herring wrote: > On Tue, Sep 27, 2016 at 12:27:11AM +0200, Peter Rosin wrote: >> The Sharp 15" LQ150X1LG11 panel is an XGA TFT LCD panel. >> >> Signed-off-by: Peter Rosin <peda@axentia.se> >> --- >> .../bindings/display/panel/sharp,lq150x1lg11.txt | 36 ++++++++++++++++++++++ >> 1 file changed, 36 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt >> >> diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt >> new file mode 100644 >> index 000000000000..715ff7e332f2 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt >> @@ -0,0 +1,36 @@ >> +Sharp 15" LQ150X1LG11 XGA TFT LCD panel >> + >> +Required properties: >> +- compatible: should be "sharp,lq150x1lg11" >> +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) > > Should be named according to the input, so vcc-supply. Right, I wanted to do that, but the simple-panel bindings has power-supply as required and I desperately wanted to be compatible in order to make use of the simple-panel driver. That driver does require this entry, so I do not see any way around it. Any advice for this situation? >> + >> +Optional properties: >> +- backlight: phandle of the backlight device >> +- rlud-gpios: a single GPIO for the RL/UD (rotate 180 degrees) pin. >> +- lvds-gpios: a single GPIO for the SELLVDS pin. > > Why not sellvds-gpios? I'll change that in v4. >> + >> +If lrud-gpios and/or ldvs-gpios are not specified, the RL/UD and/or SELLVDS > > typos... Good thing you added the plural, I found s/lrud/rlud/ and s/ldvs/lvds/ Nice catch btw, thanks! >> +pins are assumed to be handled appropriately by the hardware. >> + >> +Example: >> + >> + backlight: backlight { >> + compatible = "pwm-backlight"; >> + pwms = <&pwm 0 100000>; /* VBR */ >> + >> + brightness-levels = <0 20 40 60 80 100>; >> + default-brightness-level = <2>; >> + >> + power-supply = <&vdd_12v_reg>; /* VDD */ >> + enable-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; /* XSTABY */ >> + }; >> + >> + panel { >> + compatible = "sharp,lq150x1lg11"; >> + >> + power-supply = <&vcc_3v3_reg>; /* VCC */ >> + >> + backlight = <&backlight>; >> + rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* RL/UD */ >> + lvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */ >> + }; >> -- >> 2.1.4 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe devicetree" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3 1/2] dt-bindings: display: Add Sharp LQ150X1LG11 panel binding 2016-10-04 4:58 ` Peter Rosin (?) @ 2016-10-04 13:11 ` Rob Herring -1 siblings, 0 replies; 10+ messages in thread From: Rob Herring @ 2016-10-04 13:11 UTC (permalink / raw) To: Peter Rosin Cc: open list, Thierry Reding, David Airlie, Mark Rutland, dri-devel, devicetree, Gustaf Lindström On Mon, Oct 3, 2016 at 11:58 PM, Peter Rosin <peda@axentia.se> wrote: > On 2016-10-03 20:46, Rob Herring wrote: >> On Tue, Sep 27, 2016 at 12:27:11AM +0200, Peter Rosin wrote: >>> The Sharp 15" LQ150X1LG11 panel is an XGA TFT LCD panel. >>> >>> Signed-off-by: Peter Rosin <peda@axentia.se> >>> --- >>> .../bindings/display/panel/sharp,lq150x1lg11.txt | 36 ++++++++++++++++++++++ >>> 1 file changed, 36 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt >>> >>> diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt >>> new file mode 100644 >>> index 000000000000..715ff7e332f2 >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt >>> @@ -0,0 +1,36 @@ >>> +Sharp 15" LQ150X1LG11 XGA TFT LCD panel >>> + >>> +Required properties: >>> +- compatible: should be "sharp,lq150x1lg11" >>> +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) >> >> Should be named according to the input, so vcc-supply. > > Right, I wanted to do that, but the simple-panel bindings has power-supply > as required and I desperately wanted to be compatible in order to make use > of the simple-panel driver. That driver does require this entry, so I do > not see any way around it. Any advice for this situation? Okay, it's fine given it's a single supply. Rob ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3 2/2] drm/panel: simple: add support for Sharp LQ150X1LG11 panels 2016-09-26 22:27 ` Peter Rosin (?) (?) @ 2016-09-26 22:27 ` Peter Rosin -1 siblings, 0 replies; 10+ messages in thread From: Peter Rosin @ 2016-09-26 22:27 UTC (permalink / raw) To: open list Cc: Gustaf Lindström, Thierry Reding, David Airlie, Rob Herring, Mark Rutland, dri-devel, devicetree, Peter Rosin From: Gustaf Lindström <gl@axentia.se> The Sharp 15" LQ150X1LG11 panel is an XGA TFT LCD panel. The simple-panel driver is used to get support for essential functionality of the panel. Signed-off-by: Gustaf Lindström <gl@axentia.se> Signed-off-by: Peter Rosin <peda@axentia.se> --- drivers/gpu/drm/panel/panel-simple.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 85143d1b9b31..58cfe0a7a9d6 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1386,6 +1386,30 @@ static const struct panel_desc sharp_lq123p1jx31 = { }, }; +static const struct drm_display_mode sharp_lq150x1lg11_mode = { + .clock = 71100, + .hdisplay = 1024, + .hsync_start = 1024 + 168, + .hsync_end = 1024 + 168 + 64, + .htotal = 1024 + 168 + 64 + 88, + .vdisplay = 768, + .vsync_start = 768 + 37, + .vsync_end = 768 + 37 + 2, + .vtotal = 768 + 37 + 2 + 8, + .vrefresh = 60, +}; + +static const struct panel_desc sharp_lq150x1lg11 = { + .modes = &sharp_lq150x1lg11_mode, + .num_modes = 1, + .bpc = 8, + .size = { + .width = 304, + .height = 228, + }, + .bus_format = MEDIA_BUS_FMT_RGB565_1X16, +}; + static const struct drm_display_mode shelly_sca07010_bfn_lnn_mode = { .clock = 33300, .hdisplay = 800, @@ -1641,6 +1665,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "sharp,lq123p1jx31", .data = &sharp_lq123p1jx31, }, { + .compatible = "sharp,lq150x1lg11", + .data = &sharp_lq150x1lg11, + }, { .compatible = "shelly,sca07010-bfn-lnn", .data = &shelly_sca07010_bfn_lnn, }, { -- 2.1.4 ^ permalink raw reply related [flat|nested] 10+ messages in thread
end of thread, other threads:[~2016-10-04 13:12 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-09-26 22:27 [PATCH v3 0/2] drm/panel: simple: add support for Sharp LQ150X1LG11 panels Peter Rosin 2016-09-26 22:27 ` Peter Rosin 2016-09-26 22:27 ` [PATCH v3 1/2] dt-bindings: display: Add Sharp LQ150X1LG11 panel binding Peter Rosin 2016-09-26 22:27 ` Peter Rosin 2016-10-03 18:46 ` Rob Herring 2016-10-03 18:46 ` Rob Herring 2016-10-04 4:58 ` Peter Rosin 2016-10-04 4:58 ` Peter Rosin 2016-10-04 13:11 ` Rob Herring 2016-09-26 22:27 ` [PATCH v3 2/2] drm/panel: simple: add support for Sharp LQ150X1LG11 panels Peter Rosin
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.