* [PATCH 01/57] [media] b2c2: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
@ 2016-10-14 20:19 ` Mauro Carvalho Chehab
2016-10-14 20:19 ` [PATCH 02/57] [media] dvb-frontends: " Mauro Carvalho Chehab
` (56 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:19 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Patrick Boettcher
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/common/b2c2/flexcop-eeprom.c | 3 +--
drivers/media/common/b2c2/flexcop-i2c.c | 3 +--
drivers/media/common/b2c2/flexcop-misc.c | 9 +++------
drivers/media/common/b2c2/flexcop.c | 3 +--
4 files changed, 6 insertions(+), 12 deletions(-)
diff --git a/drivers/media/common/b2c2/flexcop-eeprom.c b/drivers/media/common/b2c2/flexcop-eeprom.c
index a25373a9bd84..844c7836c2a6 100644
--- a/drivers/media/common/b2c2/flexcop-eeprom.c
+++ b/drivers/media/common/b2c2/flexcop-eeprom.c
@@ -136,8 +136,7 @@ int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended)
if ((ret = flexcop_eeprom_lrc_read(fc,0x3f8,buf,8,4)) == 0) {
if (extended != 0) {
- err("TODO: extended (EUI64) MAC addresses aren't "
- "completely supported yet");
+ err("TODO: extended (EUI64) MAC addresses aren't completely supported yet");
ret = -EINVAL;
} else
memcpy(fc->dvb_adapter.proposed_mac,buf,6);
diff --git a/drivers/media/common/b2c2/flexcop-i2c.c b/drivers/media/common/b2c2/flexcop-i2c.c
index e41cd23f8e45..1c1dc91ccd79 100644
--- a/drivers/media/common/b2c2/flexcop-i2c.c
+++ b/drivers/media/common/b2c2/flexcop-i2c.c
@@ -33,8 +33,7 @@ static int flexcop_i2c_operation(struct flexcop_device *fc,
return -EREMOTEIO;
}
}
- deb_i2c("tried %d times i2c operation, "
- "never finished or too many ack errors.\n", i);
+ deb_i2c("tried %d times i2c operation, never finished or too many ack errors.\n", i);
return -EREMOTEIO;
}
diff --git a/drivers/media/common/b2c2/flexcop-misc.c b/drivers/media/common/b2c2/flexcop-misc.c
index b8eff235367d..bb0d95fe64f9 100644
--- a/drivers/media/common/b2c2/flexcop-misc.c
+++ b/drivers/media/common/b2c2/flexcop-misc.c
@@ -23,18 +23,15 @@ void flexcop_determine_revision(struct flexcop_device *fc)
fc->rev = FLEXCOP_III;
break;
default:
- err("unknown FlexCop Revision: %x. Please report this to "
- "linux-dvb@linuxtv.org.",
+ err("unknown FlexCop Revision: %x. Please report this to linux-dvb@linuxtv.org.",
v.misc_204.Rev_N_sig_revision_hi);
break;
}
if ((fc->has_32_hw_pid_filter = v.misc_204.Rev_N_sig_caps))
- deb_info("this FlexCop has "
- "the additional 32 hardware pid filter.\n");
+ deb_info("this FlexCop has the additional 32 hardware pid filter.\n");
else
- deb_info("this FlexCop has "
- "the 6 basic main hardware pid filter.\n");
+ deb_info("this FlexCop has the 6 basic main hardware pid filter.\n");
/* bus parts have to decide if hw pid filtering is used or not. */
}
diff --git a/drivers/media/common/b2c2/flexcop.c b/drivers/media/common/b2c2/flexcop.c
index 0f5114d406f8..4338ab0043b4 100644
--- a/drivers/media/common/b2c2/flexcop.c
+++ b/drivers/media/common/b2c2/flexcop.c
@@ -46,8 +46,7 @@ int b2c2_flexcop_debug;
EXPORT_SYMBOL_GPL(b2c2_flexcop_debug);
module_param_named(debug, b2c2_flexcop_debug, int, 0644);
MODULE_PARM_DESC(debug,
- "set debug level (1=info,2=tuner,4=i2c,8=ts,"
- "16=sram,32=reg (|-able))."
+ "set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram,32=reg (|-able))."
DEBSTATUS);
#undef DEBSTATUS
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 02/57] [media] dvb-frontends: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
2016-10-14 20:19 ` [PATCH 01/57] [media] b2c2: don't break long lines Mauro Carvalho Chehab
@ 2016-10-14 20:19 ` Mauro Carvalho Chehab
2016-10-14 20:19 ` [PATCH 03/57] [media] firewire: " Mauro Carvalho Chehab
` (55 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:19 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Malcolm Priestley,
Michael Ira Krufky, Olli Salonen, Abhilash Jindal, Hans Verkuil,
Julia Lawall
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/dvb-frontends/au8522_common.c | 4 ++--
drivers/media/dvb-frontends/cx24110.c | 4 ++--
drivers/media/dvb-frontends/cx24113.c | 4 ++--
drivers/media/dvb-frontends/cx24116.c | 10 +++++-----
drivers/media/dvb-frontends/cx24117.c | 4 ++--
drivers/media/dvb-frontends/cx24123.c | 4 ++--
drivers/media/dvb-frontends/ds3000.c | 15 +++++++--------
drivers/media/dvb-frontends/lgdt330x.c | 3 +--
drivers/media/dvb-frontends/m88rs2000.c | 11 +++++------
drivers/media/dvb-frontends/mt312.c | 7 +++----
drivers/media/dvb-frontends/nxt200x.c | 11 +++++------
drivers/media/dvb-frontends/or51132.c | 6 ++----
drivers/media/dvb-frontends/or51211.c | 3 +--
drivers/media/dvb-frontends/s5h1409.c | 4 ++--
drivers/media/dvb-frontends/s5h1411.c | 4 ++--
drivers/media/dvb-frontends/s5h1432.c | 4 ++--
drivers/media/dvb-frontends/s921.c | 4 ++--
drivers/media/dvb-frontends/si21xx.c | 8 ++++----
drivers/media/dvb-frontends/sp887x.c | 3 +--
drivers/media/dvb-frontends/stv0288.c | 11 +++++------
drivers/media/dvb-frontends/stv0297.c | 4 ++--
drivers/media/dvb-frontends/stv0299.c | 7 +++----
drivers/media/dvb-frontends/stv0900_sw.c | 3 +--
drivers/media/dvb-frontends/tda10021.c | 3 +--
drivers/media/dvb-frontends/tda10023.c | 6 ++----
drivers/media/dvb-frontends/tda10048.c | 12 ++++--------
drivers/media/dvb-frontends/ves1820.c | 8 ++++----
drivers/media/dvb-frontends/zl10036.c | 4 ++--
drivers/media/dvb-frontends/zl10039.c | 3 +--
29 files changed, 77 insertions(+), 97 deletions(-)
diff --git a/drivers/media/dvb-frontends/au8522_common.c b/drivers/media/dvb-frontends/au8522_common.c
index f135126bc373..cf4ac240a01f 100644
--- a/drivers/media/dvb-frontends/au8522_common.c
+++ b/drivers/media/dvb-frontends/au8522_common.c
@@ -50,8 +50,8 @@ int au8522_writereg(struct au8522_state *state, u16 reg, u8 data)
ret = i2c_transfer(state->i2c, &msg, 1);
if (ret != 1)
- printk("%s: writereg error (reg == 0x%02x, val == 0x%04x, "
- "ret == %i)\n", __func__, reg, data, ret);
+ printk("%s: writereg error (reg == 0x%02x, val == 0x%04x, ret == %i)\n",
+ __func__, reg, data, ret);
return (ret != 1) ? -1 : 0;
}
diff --git a/drivers/media/dvb-frontends/cx24110.c b/drivers/media/dvb-frontends/cx24110.c
index 6cb81ec12847..92a08c7bf794 100644
--- a/drivers/media/dvb-frontends/cx24110.c
+++ b/drivers/media/dvb-frontends/cx24110.c
@@ -120,8 +120,8 @@ static int cx24110_writereg (struct cx24110_state* state, int reg, int data)
int err;
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
- dprintk ("%s: writereg error (err == %i, reg == 0x%02x,"
- " data == 0x%02x)\n", __func__, err, reg, data);
+ dprintk("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n",
+ __func__, err, reg, data);
return -EREMOTEIO;
}
diff --git a/drivers/media/dvb-frontends/cx24113.c b/drivers/media/dvb-frontends/cx24113.c
index 3883c3b31aef..3812ef8cac08 100644
--- a/drivers/media/dvb-frontends/cx24113.c
+++ b/drivers/media/dvb-frontends/cx24113.c
@@ -108,8 +108,8 @@ static int cx24113_writereg(struct cx24113_state *state, int reg, int data)
.flags = 0, .buf = buf, .len = 2 };
int err = i2c_transfer(state->i2c, &msg, 1);
if (err != 1) {
- printk(KERN_DEBUG "%s: writereg error(err == %i, reg == 0x%02x,"
- " data == 0x%02x)\n", __func__, err, reg, data);
+ printk(KERN_DEBUG "%s: writereg error(err == %i, reg == 0x%02x, data == 0x%02x)\n",
+ __func__, err, reg, data);
return err;
}
diff --git a/drivers/media/dvb-frontends/cx24116.c b/drivers/media/dvb-frontends/cx24116.c
index 8814f36d53fb..b652963df103 100644
--- a/drivers/media/dvb-frontends/cx24116.c
+++ b/drivers/media/dvb-frontends/cx24116.c
@@ -209,8 +209,8 @@ static int cx24116_writereg(struct cx24116_state *state, int reg, int data)
err = i2c_transfer(state->i2c, &msg, 1);
if (err != 1) {
- printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x,"
- " value == 0x%02x)\n", __func__, err, reg, data);
+ printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x, value == 0x%02x)\n",
+ __func__, err, reg, data);
return -EREMOTEIO;
}
@@ -498,8 +498,8 @@ static int cx24116_firmware_ondemand(struct dvb_frontend *fe)
printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n",
__func__);
if (ret) {
- printk(KERN_ERR "%s: No firmware uploaded "
- "(timeout or file not found?)\n", __func__);
+ printk(KERN_ERR "%s: No firmware uploaded (timeout or file not found?)\n",
+ __func__);
return ret;
}
@@ -967,7 +967,7 @@ static int cx24116_send_diseqc_msg(struct dvb_frontend *fe,
/* Validate length */
if (d->msg_len > sizeof(d->msg))
- return -EINVAL;
+ return -EINVAL;
/* Dump DiSEqC message */
if (debug) {
diff --git a/drivers/media/dvb-frontends/cx24117.c b/drivers/media/dvb-frontends/cx24117.c
index a3f7eb4e609d..0e757be1c50d 100644
--- a/drivers/media/dvb-frontends/cx24117.c
+++ b/drivers/media/dvb-frontends/cx24117.c
@@ -474,8 +474,8 @@ static int cx24117_firmware_ondemand(struct dvb_frontend *fe)
"%s: Waiting for firmware upload(2)...\n", __func__);
if (ret) {
dev_err(&state->priv->i2c->dev,
- "%s: No firmware uploaded "
- "(timeout or file not found?)\n", __func__);
+ "%s: No firmware uploaded (timeout or file not found?)\n",
+ __func__);
return ret;
}
diff --git a/drivers/media/dvb-frontends/cx24123.c b/drivers/media/dvb-frontends/cx24123.c
index 113b0949408a..b1287de98e86 100644
--- a/drivers/media/dvb-frontends/cx24123.c
+++ b/drivers/media/dvb-frontends/cx24123.c
@@ -255,8 +255,8 @@ static int cx24123_i2c_writereg(struct cx24123_state *state,
err = i2c_transfer(state->i2c, &msg, 1);
if (err != 1) {
- printk("%s: writereg error(err == %i, reg == 0x%02x,"
- " data == 0x%02x)\n", __func__, err, reg, data);
+ printk("%s: writereg error(err == %i, reg == 0x%02x, data == 0x%02x)\n",
+ __func__, err, reg, data);
return err;
}
diff --git a/drivers/media/dvb-frontends/ds3000.c b/drivers/media/dvb-frontends/ds3000.c
index 447b518e287a..6dc79d4528c2 100644
--- a/drivers/media/dvb-frontends/ds3000.c
+++ b/drivers/media/dvb-frontends/ds3000.c
@@ -248,8 +248,8 @@ static int ds3000_writereg(struct ds3000_state *state, int reg, int data)
err = i2c_transfer(state->i2c, &msg, 1);
if (err != 1) {
- printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x,"
- " value == 0x%02x)\n", __func__, err, reg, data);
+ printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x, value == 0x%02x)\n",
+ __func__, err, reg, data);
return -EREMOTEIO;
}
@@ -296,8 +296,8 @@ static int ds3000_writeFW(struct ds3000_state *state, int reg,
ret = i2c_transfer(state->i2c, &msg, 1);
if (ret != 1) {
- printk(KERN_ERR "%s: write error(err == %i, "
- "reg == 0x%02x\n", __func__, ret, reg);
+ printk(KERN_ERR "%s: write error(err == %i, reg == 0x%02x\n",
+ __func__, ret, reg);
ret = -EREMOTEIO;
goto error;
}
@@ -364,8 +364,8 @@ static int ds3000_firmware_ondemand(struct dvb_frontend *fe)
state->i2c->dev.parent);
printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n", __func__);
if (ret) {
- printk(KERN_ERR "%s: No firmware uploaded (timeout or file not "
- "found?)\n", __func__);
+ printk(KERN_ERR "%s: No firmware uploaded (timeout or file not found?)\n",
+ __func__);
return ret;
}
@@ -1144,8 +1144,7 @@ static struct dvb_frontend_ops ds3000_ops = {
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
-MODULE_DESCRIPTION("DVB Frontend module for Montage Technology "
- "DS3000 hardware");
+MODULE_DESCRIPTION("DVB Frontend module for Montage Technology DS3000 hardware");
MODULE_AUTHOR("Konstantin Dimitrov <kosio.dimitrov@gmail.com>");
MODULE_LICENSE("GPL");
MODULE_FIRMWARE(DS3000_DEFAULT_FIRMWARE);
diff --git a/drivers/media/dvb-frontends/lgdt330x.c b/drivers/media/dvb-frontends/lgdt330x.c
index 96bf254da21e..8cb6c56d220a 100644
--- a/drivers/media/dvb-frontends/lgdt330x.c
+++ b/drivers/media/dvb-frontends/lgdt330x.c
@@ -405,8 +405,7 @@ static int lgdt330x_set_parameters(struct dvb_frontend *fe)
return -1;
}
if (err < 0)
- printk(KERN_WARNING "lgdt330x: %s: error blasting "
- "bytes to lgdt3303 for modulation type(%d)\n",
+ printk(KERN_WARNING "lgdt330x: %s: error blasting bytes to lgdt3303 for modulation type(%d)\n",
__func__, p->modulation);
/*
diff --git a/drivers/media/dvb-frontends/m88rs2000.c b/drivers/media/dvb-frontends/m88rs2000.c
index ef79a4ec31e2..3669c906ba01 100644
--- a/drivers/media/dvb-frontends/m88rs2000.c
+++ b/drivers/media/dvb-frontends/m88rs2000.c
@@ -75,8 +75,8 @@ static int m88rs2000_writereg(struct m88rs2000_state *state,
ret = i2c_transfer(state->i2c, &msg, 1);
if (ret != 1)
- deb_info("%s: writereg error (reg == 0x%02x, val == 0x%02x, "
- "ret == %i)\n", __func__, reg, data, ret);
+ deb_info("%s: writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n",
+ __func__, reg, data, ret);
return (ret != 1) ? -EREMOTEIO : 0;
}
@@ -618,10 +618,9 @@ static int m88rs2000_set_frontend(struct dvb_frontend *fe)
state->no_lock_count = 0;
if (c->delivery_system != SYS_DVBS) {
- deb_info("%s: unsupported delivery "
- "system selected (%d)\n",
- __func__, c->delivery_system);
- return -EOPNOTSUPP;
+ deb_info("%s: unsupported delivery system selected (%d)\n",
+ __func__, c->delivery_system);
+ return -EOPNOTSUPP;
}
/* Set Tuner */
diff --git a/drivers/media/dvb-frontends/mt312.c b/drivers/media/dvb-frontends/mt312.c
index fc08429c99b7..fdee75b1b99a 100644
--- a/drivers/media/dvb-frontends/mt312.c
+++ b/drivers/media/dvb-frontends/mt312.c
@@ -457,8 +457,8 @@ static int mt312_read_status(struct dvb_frontend *fe, enum fe_status *s)
if (ret < 0)
return ret;
- dprintk("QPSK_STAT_H: 0x%02x, QPSK_STAT_L: 0x%02x,"
- " FEC_STATUS: 0x%02x\n", status[0], status[1], status[2]);
+ dprintk("QPSK_STAT_H: 0x%02x, QPSK_STAT_L: 0x%02x, FEC_STATUS: 0x%02x\n",
+ status[0], status[1], status[2]);
if (status[0] & 0xc0)
*s |= FE_HAS_SIGNAL; /* signal noise ratio */
@@ -827,8 +827,7 @@ struct dvb_frontend *mt312_attach(const struct mt312_config *config,
state->freq_mult = 9;
break;
default:
- printk(KERN_WARNING "Only Zarlink VP310/MT312/ZL10313"
- " are supported chips.\n");
+ printk(KERN_WARNING "Only Zarlink VP310/MT312/ZL10313 are supported chips.\n");
goto error;
}
diff --git a/drivers/media/dvb-frontends/nxt200x.c b/drivers/media/dvb-frontends/nxt200x.c
index 79c3040912ab..7c23f0499f23 100644
--- a/drivers/media/dvb-frontends/nxt200x.c
+++ b/drivers/media/dvb-frontends/nxt200x.c
@@ -289,8 +289,7 @@ static void nxt200x_microcontroller_stop (struct nxt200x_state* state)
counter++;
}
- pr_warn("Timeout waiting for nxt200x to stop. This is ok after "
- "firmware upload.\n");
+ pr_warn("Timeout waiting for nxt200x to stop. This is ok after firmware upload.\n");
return;
}
@@ -893,8 +892,8 @@ static int nxt2002_init(struct dvb_frontend* fe)
state->i2c->dev.parent);
pr_debug("%s: Waiting for firmware upload(2)...\n", __func__);
if (ret) {
- pr_err("%s: No firmware uploaded (timeout or file not found?)"
- "\n", __func__);
+ pr_err("%s: No firmware uploaded (timeout or file not found?)\n",
+ __func__);
return ret;
}
@@ -960,8 +959,8 @@ static int nxt2004_init(struct dvb_frontend* fe)
state->i2c->dev.parent);
pr_debug("%s: Waiting for firmware upload(2)...\n", __func__);
if (ret) {
- pr_err("%s: No firmware uploaded (timeout or file not found?)"
- "\n", __func__);
+ pr_err("%s: No firmware uploaded (timeout or file not found?)\n",
+ __func__);
return ret;
}
diff --git a/drivers/media/dvb-frontends/or51132.c b/drivers/media/dvb-frontends/or51132.c
index a165af990672..bacea20822ea 100644
--- a/drivers/media/dvb-frontends/or51132.c
+++ b/drivers/media/dvb-frontends/or51132.c
@@ -342,15 +342,13 @@ static int or51132_set_parameters(struct dvb_frontend *fe)
fwname);
ret = request_firmware(&fw, fwname, state->i2c->dev.parent);
if (ret) {
- printk(KERN_WARNING "or51132: No firmware up"
- "loaded(timeout or file not found?)\n");
+ printk(KERN_WARNING "or51132: No firmware uploaded(timeout or file not found?)\n");
return ret;
}
ret = or51132_load_firmware(fe, fw);
release_firmware(fw);
if (ret) {
- printk(KERN_WARNING "or51132: Writing firmware to "
- "device failed!\n");
+ printk(KERN_WARNING "or51132: Writing firmware to device failed!\n");
return ret;
}
printk("or51132: Firmware upload complete.\n");
diff --git a/drivers/media/dvb-frontends/or51211.c b/drivers/media/dvb-frontends/or51211.c
index e82413b975e6..839479eab3b3 100644
--- a/drivers/media/dvb-frontends/or51211.c
+++ b/drivers/media/dvb-frontends/or51211.c
@@ -377,8 +377,7 @@ static int or51211_init(struct dvb_frontend* fe)
OR51211_DEFAULT_FIRMWARE);
pr_info("Got Hotplug firmware\n");
if (ret) {
- pr_warn("No firmware uploaded "
- "(timeout or file not found?)\n");
+ pr_warn("No firmware uploaded (timeout or file not found?)\n");
return ret;
}
diff --git a/drivers/media/dvb-frontends/s5h1409.c b/drivers/media/dvb-frontends/s5h1409.c
index c68965ad97c0..56c3fb442d6c 100644
--- a/drivers/media/dvb-frontends/s5h1409.c
+++ b/drivers/media/dvb-frontends/s5h1409.c
@@ -321,8 +321,8 @@ static int s5h1409_writereg(struct s5h1409_state *state, u8 reg, u16 data)
ret = i2c_transfer(state->i2c, &msg, 1);
if (ret != 1)
- printk(KERN_ERR "%s: error (reg == 0x%02x, val == 0x%04x, "
- "ret == %i)\n", __func__, reg, data, ret);
+ printk(KERN_ERR "%s: error (reg == 0x%02x, val == 0x%04x, ret == %i)\n",
+ __func__, reg, data, ret);
return (ret != 1) ? -1 : 0;
}
diff --git a/drivers/media/dvb-frontends/s5h1411.c b/drivers/media/dvb-frontends/s5h1411.c
index 90f86e82b087..a861854981b7 100644
--- a/drivers/media/dvb-frontends/s5h1411.c
+++ b/drivers/media/dvb-frontends/s5h1411.c
@@ -350,8 +350,8 @@ static int s5h1411_writereg(struct s5h1411_state *state,
ret = i2c_transfer(state->i2c, &msg, 1);
if (ret != 1)
- printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, "
- "ret == %i)\n", __func__, addr, reg, data, ret);
+ printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, ret == %i)\n",
+ __func__, addr, reg, data, ret);
return (ret != 1) ? -1 : 0;
}
diff --git a/drivers/media/dvb-frontends/s5h1432.c b/drivers/media/dvb-frontends/s5h1432.c
index 4215652f8eb7..5de79739cf63 100644
--- a/drivers/media/dvb-frontends/s5h1432.c
+++ b/drivers/media/dvb-frontends/s5h1432.c
@@ -63,8 +63,8 @@ static int s5h1432_writereg(struct s5h1432_state *state,
ret = i2c_transfer(state->i2c, &msg, 1);
if (ret != 1)
- printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, "
- "ret == %i)\n", __func__, addr, reg, data, ret);
+ printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, ret == %i)\n",
+ __func__, addr, reg, data, ret);
return (ret != 1) ? -1 : 0;
}
diff --git a/drivers/media/dvb-frontends/s921.c b/drivers/media/dvb-frontends/s921.c
index b5e3d90eba5e..98cceb149b91 100644
--- a/drivers/media/dvb-frontends/s921.c
+++ b/drivers/media/dvb-frontends/s921.c
@@ -214,8 +214,8 @@ static int s921_i2c_writereg(struct s921_state *state,
rc = i2c_transfer(state->i2c, &msg, 1);
if (rc != 1) {
- printk("%s: writereg rcor(rc == %i, reg == 0x%02x,"
- " data == 0x%02x)\n", __func__, rc, reg, data);
+ printk("%s: writereg rcor(rc == %i, reg == 0x%02x, data == 0x%02x)\n",
+ __func__, rc, reg, data);
return rc;
}
diff --git a/drivers/media/dvb-frontends/si21xx.c b/drivers/media/dvb-frontends/si21xx.c
index 62ad7a7be9f8..61e44fd88271 100644
--- a/drivers/media/dvb-frontends/si21xx.c
+++ b/drivers/media/dvb-frontends/si21xx.c
@@ -245,8 +245,8 @@ static int si21_writeregs(struct si21xx_state *state, u8 reg1,
ret = i2c_transfer(state->i2c, &msg, 1);
if (ret != 1)
- dprintk("%s: writereg error (reg1 == 0x%02x, data == 0x%02x, "
- "ret == %i)\n", __func__, reg1, data[0], ret);
+ dprintk("%s: writereg error (reg1 == 0x%02x, data == 0x%02x, ret == %i)\n",
+ __func__, reg1, data[0], ret);
return (ret != 1) ? -EREMOTEIO : 0;
}
@@ -265,8 +265,8 @@ static int si21_writereg(struct si21xx_state *state, u8 reg, u8 data)
ret = i2c_transfer(state->i2c, &msg, 1);
if (ret != 1)
- dprintk("%s: writereg error (reg == 0x%02x, data == 0x%02x, "
- "ret == %i)\n", __func__, reg, data, ret);
+ dprintk("%s: writereg error (reg == 0x%02x, data == 0x%02x, ret == %i)\n",
+ __func__, reg, data, ret);
return (ret != 1) ? -EREMOTEIO : 0;
}
diff --git a/drivers/media/dvb-frontends/sp887x.c b/drivers/media/dvb-frontends/sp887x.c
index 4378fe1b978e..f9194b7b7fec 100644
--- a/drivers/media/dvb-frontends/sp887x.c
+++ b/drivers/media/dvb-frontends/sp887x.c
@@ -63,8 +63,7 @@ static int sp887x_writereg (struct sp887x_state* state, u16 reg, u16 data)
if (!(reg == 0xf1a && data == 0x000 &&
(ret == -EREMOTEIO || ret == -EFAULT)))
{
- printk("%s: writereg error "
- "(reg %03x, data %03x, ret == %i)\n",
+ printk("%s: writereg error (reg %03x, data %03x, ret == %i)\n",
__func__, reg & 0xffff, data & 0xffff, ret);
return ret;
}
diff --git a/drivers/media/dvb-frontends/stv0288.c b/drivers/media/dvb-frontends/stv0288.c
index c93d9a45f7f7..12f6a4205e3e 100644
--- a/drivers/media/dvb-frontends/stv0288.c
+++ b/drivers/media/dvb-frontends/stv0288.c
@@ -74,8 +74,8 @@ static int stv0288_writeregI(struct stv0288_state *state, u8 reg, u8 data)
ret = i2c_transfer(state->i2c, &msg, 1);
if (ret != 1)
- dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, "
- "ret == %i)\n", __func__, reg, data, ret);
+ dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n",
+ __func__, reg, data, ret);
return (ret != 1) ? -EREMOTEIO : 0;
}
@@ -465,10 +465,9 @@ static int stv0288_set_frontend(struct dvb_frontend *fe)
dprintk("%s : FE_SET_FRONTEND\n", __func__);
if (c->delivery_system != SYS_DVBS) {
- dprintk("%s: unsupported delivery "
- "system selected (%d)\n",
- __func__, c->delivery_system);
- return -EOPNOTSUPP;
+ dprintk("%s: unsupported delivery system selected (%d)\n",
+ __func__, c->delivery_system);
+ return -EOPNOTSUPP;
}
if (state->config->set_ts_params)
diff --git a/drivers/media/dvb-frontends/stv0297.c b/drivers/media/dvb-frontends/stv0297.c
index 81b27b7c0c96..73b4d4243b74 100644
--- a/drivers/media/dvb-frontends/stv0297.c
+++ b/drivers/media/dvb-frontends/stv0297.c
@@ -57,8 +57,8 @@ static int stv0297_writereg(struct stv0297_state *state, u8 reg, u8 data)
ret = i2c_transfer(state->i2c, &msg, 1);
if (ret != 1)
- dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, "
- "ret == %i)\n", __func__, reg, data, ret);
+ dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n",
+ __func__, reg, data, ret);
return (ret != 1) ? -1 : 0;
}
diff --git a/drivers/media/dvb-frontends/stv0299.c b/drivers/media/dvb-frontends/stv0299.c
index 7927fa925f2f..a9b28ceb80d8 100644
--- a/drivers/media/dvb-frontends/stv0299.c
+++ b/drivers/media/dvb-frontends/stv0299.c
@@ -88,8 +88,8 @@ static int stv0299_writeregI (struct stv0299_state* state, u8 reg, u8 data)
ret = i2c_transfer (state->i2c, &msg, 1);
if (ret != 1)
- dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, "
- "ret == %i)\n", __func__, reg, data, ret);
+ dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n",
+ __func__, reg, data, ret);
return (ret != 1) ? -EREMOTEIO : 0;
}
@@ -761,8 +761,7 @@ module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
MODULE_DESCRIPTION("ST STV0299 DVB Demodulator driver");
-MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Peter Schildmann, Felix Domke, "
- "Andreas Oberritter, Andrew de Quincey, Kenneth Aafly");
+MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Peter Schildmann, Felix Domke, Andreas Oberritter, Andrew de Quincey, Kenneth Aafly");
MODULE_LICENSE("GPL");
EXPORT_SYMBOL(stv0299_attach);
diff --git a/drivers/media/dvb-frontends/stv0900_sw.c b/drivers/media/dvb-frontends/stv0900_sw.c
index fa63a9e929ce..bded82774f4b 100644
--- a/drivers/media/dvb-frontends/stv0900_sw.c
+++ b/drivers/media/dvb-frontends/stv0900_sw.c
@@ -1485,8 +1485,7 @@ static u32 stv0900_search_srate_coarse(struct dvb_frontend *fe)
current_step++;
direction *= -1;
- dprintk("lock: I2C_DEMOD_MODE_FIELD =0. Search started."
- " tuner freq=%d agc2=0x%x srate_coarse=%d tmg_cpt=%d\n",
+ dprintk("lock: I2C_DEMOD_MODE_FIELD =0. Search started. tuner freq=%d agc2=0x%x srate_coarse=%d tmg_cpt=%d\n",
tuner_freq, agc2_integr, coarse_srate, timingcpt);
if ((timingcpt >= 5) &&
diff --git a/drivers/media/dvb-frontends/tda10021.c b/drivers/media/dvb-frontends/tda10021.c
index 806c56691ca5..4c514e6bffda 100644
--- a/drivers/media/dvb-frontends/tda10021.c
+++ b/drivers/media/dvb-frontends/tda10021.c
@@ -77,8 +77,7 @@ static int _tda10021_writereg (struct tda10021_state* state, u8 reg, u8 data)
ret = i2c_transfer (state->i2c, &msg, 1);
if (ret != 1)
- printk("DVB: TDA10021(%d): %s, writereg error "
- "(reg == 0x%02x, val == 0x%02x, ret == %i)\n",
+ printk("DVB: TDA10021(%d): %s, writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n",
state->frontend.dvb->num, __func__, reg, data, ret);
msleep(10);
diff --git a/drivers/media/dvb-frontends/tda10023.c b/drivers/media/dvb-frontends/tda10023.c
index 3b8c7e499d0d..0c416be76d65 100644
--- a/drivers/media/dvb-frontends/tda10023.c
+++ b/drivers/media/dvb-frontends/tda10023.c
@@ -72,8 +72,7 @@ static u8 tda10023_readreg (struct tda10023_state* state, u8 reg)
ret = i2c_transfer (state->i2c, msg, 2);
if (ret != 2) {
int num = state->frontend.dvb ? state->frontend.dvb->num : -1;
- printk(KERN_ERR "DVB: TDA10023(%d): %s: readreg error "
- "(reg == 0x%02x, ret == %i)\n",
+ printk(KERN_ERR "DVB: TDA10023(%d): %s: readreg error (reg == 0x%02x, ret == %i)\n",
num, __func__, reg, ret);
}
return b1[0];
@@ -88,8 +87,7 @@ static int tda10023_writereg (struct tda10023_state* state, u8 reg, u8 data)
ret = i2c_transfer (state->i2c, &msg, 1);
if (ret != 1) {
int num = state->frontend.dvb ? state->frontend.dvb->num : -1;
- printk(KERN_ERR "DVB: TDA10023(%d): %s, writereg error "
- "(reg == 0x%02x, val == 0x%02x, ret == %i)\n",
+ printk(KERN_ERR "DVB: TDA10023(%d): %s, writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n",
num, __func__, reg, data, ret);
}
return (ret != 1) ? -EREMOTEIO : 0;
diff --git a/drivers/media/dvb-frontends/tda10048.c b/drivers/media/dvb-frontends/tda10048.c
index c2bf89d0b0b0..7cb23f89a03b 100644
--- a/drivers/media/dvb-frontends/tda10048.c
+++ b/drivers/media/dvb-frontends/tda10048.c
@@ -1063,32 +1063,28 @@ static void tda10048_establish_defaults(struct dvb_frontend *fe)
/* Validate/default the config */
if (config->dtv6_if_freq_khz == 0) {
config->dtv6_if_freq_khz = TDA10048_IF_4300;
- printk(KERN_WARNING "%s() tda10048_config.dtv6_if_freq_khz "
- "is not set (defaulting to %d)\n",
+ printk(KERN_WARNING "%s() tda10048_config.dtv6_if_freq_khz is not set (defaulting to %d)\n",
__func__,
config->dtv6_if_freq_khz);
}
if (config->dtv7_if_freq_khz == 0) {
config->dtv7_if_freq_khz = TDA10048_IF_4300;
- printk(KERN_WARNING "%s() tda10048_config.dtv7_if_freq_khz "
- "is not set (defaulting to %d)\n",
+ printk(KERN_WARNING "%s() tda10048_config.dtv7_if_freq_khz is not set (defaulting to %d)\n",
__func__,
config->dtv7_if_freq_khz);
}
if (config->dtv8_if_freq_khz == 0) {
config->dtv8_if_freq_khz = TDA10048_IF_4300;
- printk(KERN_WARNING "%s() tda10048_config.dtv8_if_freq_khz "
- "is not set (defaulting to %d)\n",
+ printk(KERN_WARNING "%s() tda10048_config.dtv8_if_freq_khz is not set (defaulting to %d)\n",
__func__,
config->dtv8_if_freq_khz);
}
if (config->clk_freq_khz == 0) {
config->clk_freq_khz = TDA10048_CLK_16000;
- printk(KERN_WARNING "%s() tda10048_config.clk_freq_khz "
- "is not set (defaulting to %d)\n",
+ printk(KERN_WARNING "%s() tda10048_config.clk_freq_khz is not set (defaulting to %d)\n",
__func__,
config->clk_freq_khz);
}
diff --git a/drivers/media/dvb-frontends/ves1820.c b/drivers/media/dvb-frontends/ves1820.c
index b09fe88c40f8..24ac54b3b967 100644
--- a/drivers/media/dvb-frontends/ves1820.c
+++ b/drivers/media/dvb-frontends/ves1820.c
@@ -65,8 +65,8 @@ static int ves1820_writereg(struct ves1820_state *state, u8 reg, u8 data)
ret = i2c_transfer(state->i2c, &msg, 1);
if (ret != 1)
- printk("ves1820: %s(): writereg error (reg == 0x%02x, "
- "val == 0x%02x, ret == %i)\n", __func__, reg, data, ret);
+ printk("ves1820: %s(): writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n",
+ __func__, reg, data, ret);
return (ret != 1) ? -EREMOTEIO : 0;
}
@@ -84,8 +84,8 @@ static u8 ves1820_readreg(struct ves1820_state *state, u8 reg)
ret = i2c_transfer(state->i2c, msg, 2);
if (ret != 2)
- printk("ves1820: %s(): readreg error (reg == 0x%02x, "
- "ret == %i)\n", __func__, reg, ret);
+ printk("ves1820: %s(): readreg error (reg == 0x%02x, ret == %i)\n",
+ __func__, reg, ret);
return b1[0];
}
diff --git a/drivers/media/dvb-frontends/zl10036.c b/drivers/media/dvb-frontends/zl10036.c
index 7ed81315965f..df5d0fe24687 100644
--- a/drivers/media/dvb-frontends/zl10036.c
+++ b/drivers/media/dvb-frontends/zl10036.c
@@ -85,8 +85,8 @@ static int zl10036_read_status_reg(struct zl10036_state *state)
deb_i2c("R(status): %02x [FL=%d]\n", status,
(status & STATUS_FL) ? 1 : 0);
if (status & STATUS_POR)
- deb_info("%s: Power-On-Reset bit enabled - "
- "need to initialize the tuner\n", __func__);
+ deb_info("%s: Power-On-Reset bit enabled - need to initialize the tuner\n",
+ __func__);
return status;
}
diff --git a/drivers/media/dvb-frontends/zl10039.c b/drivers/media/dvb-frontends/zl10039.c
index f8c271be196c..d6ded11fee49 100644
--- a/drivers/media/dvb-frontends/zl10039.c
+++ b/drivers/media/dvb-frontends/zl10039.c
@@ -152,8 +152,7 @@ static int zl10039_init(struct dvb_frontend *fe)
/* Reset logic */
ret = zl10039_writereg(state, GENERAL, 0x40);
if (ret < 0) {
- dprintk("Note: i2c write error normal when resetting the "
- "tuner\n");
+ dprintk("Note: i2c write error normal when resetting the tuner\n");
}
/* Wake up */
ret = zl10039_writereg(state, GENERAL, 0x01);
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 03/57] [media] firewire: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
2016-10-14 20:19 ` [PATCH 01/57] [media] b2c2: don't break long lines Mauro Carvalho Chehab
2016-10-14 20:19 ` [PATCH 02/57] [media] dvb-frontends: " Mauro Carvalho Chehab
@ 2016-10-14 20:19 ` Mauro Carvalho Chehab
2016-10-15 11:10 ` Takashi Sakamoto
2016-10-14 20:19 ` [PATCH 04/57] [media] cx25840: " Mauro Carvalho Chehab
` (54 subsequent siblings)
57 siblings, 1 reply; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:19 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Stefan Richter, Mauro Carvalho Chehab,
linux1394-devel
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/firewire/firedtv-avc.c | 5 +++--
drivers/media/firewire/firedtv-rc.c | 5 +++--
2 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/media/firewire/firedtv-avc.c b/drivers/media/firewire/firedtv-avc.c
index 251a556112a9..e04235ea23fb 100644
--- a/drivers/media/firewire/firedtv-avc.c
+++ b/drivers/media/firewire/firedtv-avc.c
@@ -1181,8 +1181,9 @@ int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length)
if (es_info_length > 0) {
pmt_cmd_id = msg[read_pos++];
if (pmt_cmd_id != 1 && pmt_cmd_id != 4)
- dev_err(fdtv->device, "invalid pmt_cmd_id %d "
- "at stream level\n", pmt_cmd_id);
+ dev_err(fdtv->device,
+ "invalid pmt_cmd_id %d at stream level\n",
+ pmt_cmd_id);
if (es_info_length > sizeof(c->operand) - 4 -
write_pos) {
diff --git a/drivers/media/firewire/firedtv-rc.c b/drivers/media/firewire/firedtv-rc.c
index f82d4a93feb3..babfb9cee20e 100644
--- a/drivers/media/firewire/firedtv-rc.c
+++ b/drivers/media/firewire/firedtv-rc.c
@@ -184,8 +184,9 @@ void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code)
else if (code >= 0x4540 && code <= 0x4542)
code = oldtable[code - 0x4521];
else {
- printk(KERN_DEBUG "firedtv: invalid key code 0x%04x "
- "from remote control\n", code);
+ printk(KERN_DEBUG
+ "firedtv: invalid key code 0x%04x from remote control\n",
+ code);
return;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* Re: [PATCH 03/57] [media] firewire: don't break long lines
2016-10-14 20:19 ` [PATCH 03/57] [media] firewire: " Mauro Carvalho Chehab
@ 2016-10-15 11:10 ` Takashi Sakamoto
2016-10-15 13:47 ` Stefan Richter
0 siblings, 1 reply; 79+ messages in thread
From: Takashi Sakamoto @ 2016-10-15 11:10 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: linux1394-devel, Mauro Carvalho Chehab, Mauro Carvalho Chehab,
Linux Media Mailing List
Hi,
On Oct 15 2016 05:19, Mauro Carvalho Chehab wrote:
> Due to the 80-cols checkpatch warnings, several strings
> were broken into multiple lines. This is not considered
> a good practice anymore, as it makes harder to grep for
> strings at the source code. So, join those continuation
> lines.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
I prefer this patch because of the same reason in patch comment.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
> ---
> drivers/media/firewire/firedtv-avc.c | 5 +++--
> drivers/media/firewire/firedtv-rc.c | 5 +++--
> 2 files changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/firewire/firedtv-avc.c b/drivers/media/firewire/firedtv-avc.c
> index 251a556112a9..e04235ea23fb 100644
> --- a/drivers/media/firewire/firedtv-avc.c
> +++ b/drivers/media/firewire/firedtv-avc.c
> @@ -1181,8 +1181,9 @@ int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length)
> if (es_info_length > 0) {
> pmt_cmd_id = msg[read_pos++];
> if (pmt_cmd_id != 1 && pmt_cmd_id != 4)
> - dev_err(fdtv->device, "invalid pmt_cmd_id %d "
> - "at stream level\n", pmt_cmd_id);
> + dev_err(fdtv->device,
> + "invalid pmt_cmd_id %d at stream level\n",
> + pmt_cmd_id);
>
> if (es_info_length > sizeof(c->operand) - 4 -
> write_pos) {
> diff --git a/drivers/media/firewire/firedtv-rc.c b/drivers/media/firewire/firedtv-rc.c
> index f82d4a93feb3..babfb9cee20e 100644
> --- a/drivers/media/firewire/firedtv-rc.c
> +++ b/drivers/media/firewire/firedtv-rc.c
> @@ -184,8 +184,9 @@ void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code)
> else if (code >= 0x4540 && code <= 0x4542)
> code = oldtable[code - 0x4521];
> else {
> - printk(KERN_DEBUG "firedtv: invalid key code 0x%04x "
> - "from remote control\n", code);
> + printk(KERN_DEBUG
> + "firedtv: invalid key code 0x%04x from remote control\n",
> + code);
> return;
> }
Regards
Takashi Sakamoto
^ permalink raw reply [flat|nested] 79+ messages in thread* Re: [PATCH 03/57] [media] firewire: don't break long lines
2016-10-15 11:10 ` Takashi Sakamoto
@ 2016-10-15 13:47 ` Stefan Richter
0 siblings, 0 replies; 79+ messages in thread
From: Stefan Richter @ 2016-10-15 13:47 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Takashi Sakamoto, linux1394-devel, Mauro Carvalho Chehab,
Mauro Carvalho Chehab, Linux Media Mailing List
On Oct 15 Takashi Sakamoto wrote:
> On Oct 15 2016 05:19, Mauro Carvalho Chehab wrote:
> > Due to the 80-cols checkpatch warnings, several strings
> > were broken into multiple lines. This is not considered
> > a good practice anymore, as it makes harder to grep for
> > strings at the source code. So, join those continuation
> > lines.
> >
> > Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
>
> I prefer this patch because of the same reason in patch comment.
>
> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
> > ---
> > drivers/media/firewire/firedtv-avc.c | 5 +++--
> > drivers/media/firewire/firedtv-rc.c | 5 +++--
> > 2 files changed, 6 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/media/firewire/firedtv-avc.c b/drivers/media/firewire/firedtv-avc.c
> > index 251a556112a9..e04235ea23fb 100644
> > --- a/drivers/media/firewire/firedtv-avc.c
> > +++ b/drivers/media/firewire/firedtv-avc.c
> > @@ -1181,8 +1181,9 @@ int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length)
> > if (es_info_length > 0) {
> > pmt_cmd_id = msg[read_pos++];
> > if (pmt_cmd_id != 1 && pmt_cmd_id != 4)
> > - dev_err(fdtv->device, "invalid pmt_cmd_id %d "
> > - "at stream level\n", pmt_cmd_id);
> > + dev_err(fdtv->device,
> > + "invalid pmt_cmd_id %d at stream level\n",
> > + pmt_cmd_id);
> >
> > if (es_info_length > sizeof(c->operand) - 4 -
> > write_pos) {
> > diff --git a/drivers/media/firewire/firedtv-rc.c b/drivers/media/firewire/firedtv-rc.c
> > index f82d4a93feb3..babfb9cee20e 100644
> > --- a/drivers/media/firewire/firedtv-rc.c
> > +++ b/drivers/media/firewire/firedtv-rc.c
> > @@ -184,8 +184,9 @@ void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code)
> > else if (code >= 0x4540 && code <= 0x4542)
> > code = oldtable[code - 0x4521];
> > else {
> > - printk(KERN_DEBUG "firedtv: invalid key code 0x%04x "
> > - "from remote control\n", code);
> > + printk(KERN_DEBUG
> > + "firedtv: invalid key code 0x%04x from remote control\n",
> > + code);
> > return;
> > }
>
>
> Regards
>
> Takashi Sakamoto
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Stefan Richter
-======----- =-=- -====
http://arcgraph.de/sr/
^ permalink raw reply [flat|nested] 79+ messages in thread
* [PATCH 04/57] [media] cx25840: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (2 preceding siblings ...)
2016-10-14 20:19 ` [PATCH 03/57] [media] firewire: " Mauro Carvalho Chehab
@ 2016-10-14 20:19 ` Mauro Carvalho Chehab
2016-10-14 20:19 ` [PATCH 05/57] [media] smiapp: " Mauro Carvalho Chehab
` (53 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:19 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Hans Verkuil,
Arnd Bergmann, Laurent Pinchart, Sakari Ailus
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/i2c/cx25840/cx25840-core.c | 11 +++--------
drivers/media/i2c/cx25840/cx25840-ir.c | 6 ++----
2 files changed, 5 insertions(+), 12 deletions(-)
diff --git a/drivers/media/i2c/cx25840/cx25840-core.c b/drivers/media/i2c/cx25840/cx25840-core.c
index 142ae28803bb..0dcf450052ac 100644
--- a/drivers/media/i2c/cx25840/cx25840-core.c
+++ b/drivers/media/i2c/cx25840/cx25840-core.c
@@ -873,10 +873,7 @@ void cx25840_std_setup(struct i2c_client *client)
"Chroma sub-carrier freq = %d.%06d MHz\n",
fsc / 1000000, fsc % 1000000);
- v4l_dbg(1, cx25840_debug, client, "hblank %i, hactive %i, "
- "vblank %i, vactive %i, vblank656 %i, src_dec %i, "
- "burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x, "
- "sc 0x%06x\n",
+ v4l_dbg(1, cx25840_debug, client, "hblank %i, hactive %i, vblank %i, vactive %i, vblank656 %i, src_dec %i, burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x, sc 0x%06x\n",
hblank, hactive, vblank, vactive, vblank656,
src_decimation, burst, luma_lpf, uv_lpf, comb, sc);
}
@@ -5169,11 +5166,9 @@ static int cx25840_probe(struct i2c_client *client,
id = CX2310X_AV;
} else if ((device_id & 0xff) == (device_id >> 8)) {
v4l_err(client,
- "likely a confused/unresponsive cx2388[578] A/V decoder"
- " found @ 0x%x (%s)\n",
+ "likely a confused/unresponsive cx2388[578] A/V decoder found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
- v4l_err(client, "A method to reset it from the cx25840 driver"
- " software is not known at this time\n");
+ v4l_err(client, "A method to reset it from the cx25840 driver software is not known at this time\n");
return -ENODEV;
} else {
v4l_dbg(1, cx25840_debug, client, "cx25840 not found\n");
diff --git a/drivers/media/i2c/cx25840/cx25840-ir.c b/drivers/media/i2c/cx25840/cx25840-ir.c
index 4b782012cadc..291f7d0a1c5c 100644
--- a/drivers/media/i2c/cx25840/cx25840-ir.c
+++ b/drivers/media/i2c/cx25840/cx25840-ir.c
@@ -1113,8 +1113,7 @@ int cx25840_ir_log_status(struct v4l2_subdev *sd)
j = 0;
break;
}
- v4l2_info(sd, "\tNext carrier edge window: 16 clocks "
- "-%1d/+%1d, %u to %u Hz\n", i, j,
+ v4l2_info(sd, "\tNext carrier edge window: 16 clocks -%1d/+%1d, %u to %u Hz\n", i, j,
clock_divider_to_freq(rxclk, 16 + j),
clock_divider_to_freq(rxclk, 16 - i));
}
@@ -1124,8 +1123,7 @@ int cx25840_ir_log_status(struct v4l2_subdev *sd)
v4l2_info(sd, "\tLow pass filter: %s\n",
filtr ? "enabled" : "disabled");
if (filtr)
- v4l2_info(sd, "\tMin acceptable pulse width (LPF): %u us, "
- "%u ns\n",
+ v4l2_info(sd, "\tMin acceptable pulse width (LPF): %u us, %u ns\n",
lpf_count_to_us(filtr),
lpf_count_to_ns(filtr));
v4l2_info(sd, "\tPulse width timer timed-out: %s\n",
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 05/57] [media] smiapp: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (3 preceding siblings ...)
2016-10-14 20:19 ` [PATCH 04/57] [media] cx25840: " Mauro Carvalho Chehab
@ 2016-10-14 20:19 ` Mauro Carvalho Chehab
2016-10-14 20:19 ` [PATCH 06/57] [media] soc_camera: " Mauro Carvalho Chehab
` (52 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:19 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Sakari Ailus, Mauro Carvalho Chehab
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/i2c/smiapp/smiapp-regs.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/media/i2c/smiapp/smiapp-regs.c b/drivers/media/i2c/smiapp/smiapp-regs.c
index 1e501c06d18c..f1ba4a2712ce 100644
--- a/drivers/media/i2c/smiapp/smiapp-regs.c
+++ b/drivers/media/i2c/smiapp/smiapp-regs.c
@@ -268,8 +268,7 @@ int smiapp_write_no_quirk(struct smiapp_sensor *sensor, u32 reg, u32 val)
if (r == 1) {
if (retries)
dev_err(&client->dev,
- "sensor i2c stall encountered. "
- "retries: %d\n", retries);
+ "sensor i2c stall encountered. retries: %d\n", retries);
return 0;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 06/57] [media] soc_camera: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (4 preceding siblings ...)
2016-10-14 20:19 ` [PATCH 05/57] [media] smiapp: " Mauro Carvalho Chehab
@ 2016-10-14 20:19 ` Mauro Carvalho Chehab
2016-10-14 20:19 ` [PATCH 07/57] [media] b2c2: " Mauro Carvalho Chehab
` (51 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:19 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Guennadi Liakhovetski,
Mauro Carvalho Chehab
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/i2c/soc_camera/ov772x.c | 3 +--
drivers/media/i2c/soc_camera/ov9740.c | 3 +--
drivers/media/i2c/soc_camera/tw9910.c | 3 +--
3 files changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/media/i2c/soc_camera/ov772x.c b/drivers/media/i2c/soc_camera/ov772x.c
index 7e68762b3a4b..985a3672b243 100644
--- a/drivers/media/i2c/soc_camera/ov772x.c
+++ b/drivers/media/i2c/soc_camera/ov772x.c
@@ -1064,8 +1064,7 @@ static int ov772x_probe(struct i2c_client *client,
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(&adapter->dev,
- "I2C-Adapter doesn't support "
- "I2C_FUNC_SMBUS_BYTE_DATA\n");
+ "I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE_DATA\n");
return -EIO;
}
diff --git a/drivers/media/i2c/soc_camera/ov9740.c b/drivers/media/i2c/soc_camera/ov9740.c
index 0da632d7d33a..f11f76cdacad 100644
--- a/drivers/media/i2c/soc_camera/ov9740.c
+++ b/drivers/media/i2c/soc_camera/ov9740.c
@@ -881,8 +881,7 @@ static int ov9740_video_probe(struct i2c_client *client)
goto done;
}
- dev_info(&client->dev, "ov9740 Model ID 0x%04x, Revision 0x%02x, "
- "Manufacturer 0x%02x, SMIA Version 0x%02x\n",
+ dev_info(&client->dev, "ov9740 Model ID 0x%04x, Revision 0x%02x, Manufacturer 0x%02x, SMIA Version 0x%02x\n",
priv->model, priv->revision, priv->manid, priv->smiaver);
ret = v4l2_ctrl_handler_setup(&priv->hdl);
diff --git a/drivers/media/i2c/soc_camera/tw9910.c b/drivers/media/i2c/soc_camera/tw9910.c
index 4002c07f3857..c9c49ed707b8 100644
--- a/drivers/media/i2c/soc_camera/tw9910.c
+++ b/drivers/media/i2c/soc_camera/tw9910.c
@@ -947,8 +947,7 @@ static int tw9910_probe(struct i2c_client *client,
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(&client->dev,
- "I2C-Adapter doesn't support "
- "I2C_FUNC_SMBUS_BYTE_DATA\n");
+ "I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE_DATA\n");
return -EIO;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 07/57] [media] b2c2: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (5 preceding siblings ...)
2016-10-14 20:19 ` [PATCH 06/57] [media] soc_camera: " Mauro Carvalho Chehab
@ 2016-10-14 20:19 ` Mauro Carvalho Chehab
2016-10-14 20:19 ` [PATCH 08/57] [media] bt8xx: " Mauro Carvalho Chehab
` (50 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:19 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Patrick Boettcher
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/pci/b2c2/flexcop-dma.c | 6 ++----
drivers/media/pci/b2c2/flexcop-pci.c | 6 ++----
2 files changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/media/pci/b2c2/flexcop-dma.c b/drivers/media/pci/b2c2/flexcop-dma.c
index 2881e0d956ad..913dc97f8b49 100644
--- a/drivers/media/pci/b2c2/flexcop-dma.c
+++ b/drivers/media/pci/b2c2/flexcop-dma.c
@@ -57,8 +57,7 @@ int flexcop_dma_config(struct flexcop_device *fc,
fc->write_ibi_reg(fc,dma2_014,v0x4);
fc->write_ibi_reg(fc,dma2_01c,v0xc);
} else {
- err("either DMA1 or DMA2 can be configured within one "
- "flexcop_dma_config call.");
+ err("either DMA1 or DMA2 can be configured within one flexcop_dma_config call.");
return -EINVAL;
}
@@ -82,8 +81,7 @@ int flexcop_dma_xfer_control(struct flexcop_device *fc,
r0x0 = dma2_010;
r0xc = dma2_01c;
} else {
- err("either transfer DMA1 or DMA2 can be started within one "
- "flexcop_dma_xfer_control call.");
+ err("either transfer DMA1 or DMA2 can be started within one flexcop_dma_xfer_control call.");
return -EINVAL;
}
diff --git a/drivers/media/pci/b2c2/flexcop-pci.c b/drivers/media/pci/b2c2/flexcop-pci.c
index 4cac1fc233f2..f0d127e640bb 100644
--- a/drivers/media/pci/b2c2/flexcop-pci.c
+++ b/drivers/media/pci/b2c2/flexcop-pci.c
@@ -185,8 +185,7 @@ static irqreturn_t flexcop_pci_isr(int irq, void *dev_id)
fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2;
u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0;
- deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, "
- "last_cur_pos: %08x ",
+ deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, last_cur_pos: %08x ",
jiffies_to_usecs(jiffies - fc_pci->last_irq),
v.raw, (unsigned long long)cur_addr, cur_pos,
fc_pci->last_dma1_cur_pos);
@@ -220,8 +219,7 @@ static irqreturn_t flexcop_pci_isr(int irq, void *dev_id)
fc_pci->last_dma1_cur_pos = cur_pos;
fc_pci->count++;
} else {
- deb_irq("isr for flexcop called, "
- "apparently without reason (%08x)\n", v.raw);
+ deb_irq("isr for flexcop called, apparently without reason (%08x)\n", v.raw);
ret = IRQ_NONE;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 08/57] [media] bt8xx: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (6 preceding siblings ...)
2016-10-14 20:19 ` [PATCH 07/57] [media] b2c2: " Mauro Carvalho Chehab
@ 2016-10-14 20:19 ` Mauro Carvalho Chehab
2016-10-14 20:19 ` [PATCH 09/57] [media] cx18: " Mauro Carvalho Chehab
` (49 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:19 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Arnd Bergmann,
Julia Lawall, Takashi Iwai, Hans Verkuil, Geliang Tang,
Markus Elfring, Hans de Goede
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/pci/bt8xx/bttv-cards.c | 9 +++------
drivers/media/pci/bt8xx/bttv-driver.c | 6 ++----
drivers/media/pci/bt8xx/bttv-i2c.c | 6 ++----
drivers/media/pci/bt8xx/bttv-input.c | 3 +--
4 files changed, 8 insertions(+), 16 deletions(-)
diff --git a/drivers/media/pci/bt8xx/bttv-cards.c b/drivers/media/pci/bt8xx/bttv-cards.c
index 8a17cc0bfa07..4ad50f978e0e 100644
--- a/drivers/media/pci/bt8xx/bttv-cards.c
+++ b/drivers/media/pci/bt8xx/bttv-cards.c
@@ -125,10 +125,8 @@ module_param_array(remote, int, NULL, 0444);
module_param_array(audiodev, int, NULL, 0444);
module_param_array(audiomux, int, NULL, 0444);
-MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
- "[enable bug compatibility for triton1 + others]");
-MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
- "[yet another chipset flaw workaround]");
+MODULE_PARM_DESC(triton1,"set ETBF pci config bit [enable bug compatibility for triton1 + others]");
+MODULE_PARM_DESC(vsfx,"set VSFX pci config bit [yet another chipset flaw workaround]");
MODULE_PARM_DESC(latency,"pci latency timer");
MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
MODULE_PARM_DESC(pll, "specify installed crystal (0=none, 28=28 MHz, 35=35 MHz, 14=14 MHz)");
@@ -141,8 +139,7 @@ MODULE_PARM_DESC(audiodev, "specify audio device:\n"
"\t\t 2 = tda7432\n"
"\t\t 3 = tvaudio");
MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
-MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
- " [some VIA/SIS chipsets are known to have problem with overlay]");
+MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables) [some VIA/SIS chipsets are known to have problem with overlay]");
/* ----------------------------------------------------------------------- */
/* list of card IDs for bt878+ cards */
diff --git a/drivers/media/pci/bt8xx/bttv-driver.c b/drivers/media/pci/bt8xx/bttv-driver.c
index 97b91a9f9fa9..fb4aefbcc8f8 100644
--- a/drivers/media/pci/bt8xx/bttv-driver.c
+++ b/drivers/media/pci/bt8xx/bttv-driver.c
@@ -148,8 +148,7 @@ MODULE_PARM_DESC(irq_debug, "irq handler debug messages, default is 0 (no)");
MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
MODULE_PARM_DESC(gbuffers, "number of capture buffers. range 2-32, default 8");
MODULE_PARM_DESC(gbufsize, "size of the capture buffers, default is 0x208000");
-MODULE_PARM_DESC(reset_crop, "reset cropping parameters at open(), default "
- "is 1 (yes) for compatibility with older applications");
+MODULE_PARM_DESC(reset_crop, "reset cropping parameters at open(), default is 1 (yes) for compatibility with older applications");
MODULE_PARM_DESC(automute, "mute audio on bad/missing video signal, default is 1 (yes)");
MODULE_PARM_DESC(chroma_agc, "enables the AGC of chroma signal, default is 0 (no)");
MODULE_PARM_DESC(agc_crush, "enables the luminance AGC crush, default is 1 (yes)");
@@ -3506,8 +3505,7 @@ static void bttv_irq_debug_low_latency(struct bttv *btv, u32 rc)
(unsigned long)rc);
if (0 == (btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC)) {
- pr_notice("%d: Oh, there (temporarily?) is no input signal. "
- "Ok, then this is harmless, don't worry ;)\n",
+ pr_notice("%d: Oh, there (temporarily?) is no input signal. Ok, then this is harmless, don't worry ;)\n",
btv->c.nr);
return;
}
diff --git a/drivers/media/pci/bt8xx/bttv-i2c.c b/drivers/media/pci/bt8xx/bttv-i2c.c
index d43911deb617..830437471038 100644
--- a/drivers/media/pci/bt8xx/bttv-i2c.c
+++ b/drivers/media/pci/bt8xx/bttv-i2c.c
@@ -44,15 +44,13 @@ static int i2c_scan;
module_param(i2c_debug, int, 0644);
MODULE_PARM_DESC(i2c_debug, "configure i2c debug level");
module_param(i2c_hw, int, 0444);
-MODULE_PARM_DESC(i2c_hw,"force use of hardware i2c support, "
- "instead of software bitbang");
+MODULE_PARM_DESC(i2c_hw,"force use of hardware i2c support, instead of software bitbang");
module_param(i2c_scan, int, 0444);
MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time");
static unsigned int i2c_udelay = 5;
module_param(i2c_udelay, int, 0444);
-MODULE_PARM_DESC(i2c_udelay,"soft i2c delay at insmod time, in usecs "
- "(should be 5 or higher). Lower value means higher bus speed.");
+MODULE_PARM_DESC(i2c_udelay,"soft i2c delay at insmod time, in usecs (should be 5 or higher). Lower value means higher bus speed.");
/* ----------------------------------------------------------------------- */
/* I2C functions - bitbanging adapter (software i2c) */
diff --git a/drivers/media/pci/bt8xx/bttv-input.c b/drivers/media/pci/bt8xx/bttv-input.c
index a75c53da224a..de2270e1ccc3 100644
--- a/drivers/media/pci/bt8xx/bttv-input.c
+++ b/drivers/media/pci/bt8xx/bttv-input.c
@@ -185,8 +185,7 @@ static u32 bttv_rc5_decode(unsigned int code)
return 0;
}
}
- dprintk("code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
- "instr=%x\n", rc5, org_code, RC5_START(rc5),
+ dprintk("code=%x, rc5=%x, start=%x, toggle=%x, address=%x, instr=%x\n", rc5, org_code, RC5_START(rc5),
RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
return rc5;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 09/57] [media] cx18: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (7 preceding siblings ...)
2016-10-14 20:19 ` [PATCH 08/57] [media] bt8xx: " Mauro Carvalho Chehab
@ 2016-10-14 20:19 ` Mauro Carvalho Chehab
2016-10-14 20:19 ` [PATCH 10/57] [media] cx23885: " Mauro Carvalho Chehab
` (48 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:19 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Andy Walls, Mauro Carvalho Chehab
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/pci/cx18/cx18-alsa-main.c | 6 ++----
drivers/media/pci/cx18/cx18-av-core.c | 14 ++++---------
drivers/media/pci/cx18/cx18-av-firmware.c | 3 +--
drivers/media/pci/cx18/cx18-controls.c | 9 +++-----
drivers/media/pci/cx18/cx18-driver.c | 30 +++++++++-----------------
drivers/media/pci/cx18/cx18-dvb.c | 6 ++----
drivers/media/pci/cx18/cx18-fileops.c | 6 ++----
drivers/media/pci/cx18/cx18-ioctl.c | 6 ++----
drivers/media/pci/cx18/cx18-irq.c | 3 +--
drivers/media/pci/cx18/cx18-mailbox.c | 35 +++++++++----------------------
drivers/media/pci/cx18/cx18-queue.c | 7 ++-----
drivers/media/pci/cx18/cx18-streams.c | 6 ++----
12 files changed, 41 insertions(+), 90 deletions(-)
diff --git a/drivers/media/pci/cx18/cx18-alsa-main.c b/drivers/media/pci/cx18/cx18-alsa-main.c
index 0b0e8015ad34..51ebe4962805 100644
--- a/drivers/media/pci/cx18/cx18-alsa-main.c
+++ b/drivers/media/pci/cx18/cx18-alsa-main.c
@@ -217,8 +217,7 @@ static int cx18_alsa_load(struct cx18 *cx)
s = &cx->streams[CX18_ENC_STREAM_TYPE_PCM];
if (s->video_dev.v4l2_dev == NULL) {
- CX18_DEBUG_ALSA_INFO("%s: PCM stream for card is disabled - "
- "skipping\n", __func__);
+ CX18_DEBUG_ALSA_INFO("%s: PCM stream for card is disabled - skipping\n", __func__);
return 0;
}
@@ -232,8 +231,7 @@ static int cx18_alsa_load(struct cx18 *cx)
CX18_ALSA_ERR("%s: failed to create struct snd_cx18_card\n",
__func__);
} else {
- CX18_DEBUG_ALSA_INFO("%s: created cx18 ALSA interface instance "
- "\n", __func__);
+ CX18_DEBUG_ALSA_INFO("%s: created cx18 ALSA interface instance \n", __func__);
}
return 0;
}
diff --git a/drivers/media/pci/cx18/cx18-av-core.c b/drivers/media/pci/cx18/cx18-av-core.c
index 30bbe8d1ea55..2761b09ac935 100644
--- a/drivers/media/pci/cx18/cx18-av-core.c
+++ b/drivers/media/pci/cx18/cx18-av-core.c
@@ -468,21 +468,16 @@ void cx18_av_std_setup(struct cx18 *cx)
CX18_DEBUG_INFO_DEV(sd, "Pixel rate = %d.%06d Mpixel/sec\n",
pll / 8000000, (pll / 8) % 1000000);
- CX18_DEBUG_INFO_DEV(sd, "ADC XTAL/pixel clock decimation ratio "
- "= %d.%03d\n", src_decimation / 256,
+ CX18_DEBUG_INFO_DEV(sd, "ADC XTAL/pixel clock decimation ratio = %d.%03d\n", src_decimation / 256,
((src_decimation % 256) * 1000) / 256);
tmp = 28636360 * (u64) sc;
do_div(tmp, src_decimation);
fsc = tmp >> 13;
CX18_DEBUG_INFO_DEV(sd,
- "Chroma sub-carrier initial freq = %d.%06d "
- "MHz\n", fsc / 1000000, fsc % 1000000);
+ "Chroma sub-carrier initial freq = %d.%06d MHz\n", fsc / 1000000, fsc % 1000000);
- CX18_DEBUG_INFO_DEV(sd, "hblank %i, hactive %i, vblank %i, "
- "vactive %i, vblank656 %i, src_dec %i, "
- "burst 0x%02x, luma_lpf %i, uv_lpf %i, "
- "comb 0x%02x, sc 0x%06x\n",
+ CX18_DEBUG_INFO_DEV(sd, "hblank %i, hactive %i, vblank %i, vactive %i, vblank656 %i, src_dec %i, burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x, sc 0x%06x\n",
hblank, hactive, vblank, vactive, vblank656,
src_decimation, burst, luma_lpf, uv_lpf,
comb, sc);
@@ -1069,8 +1064,7 @@ static void log_video_status(struct cx18 *cx)
CX18_INFO_DEV(sd, "Specified video input: Composite %d\n",
vid_input - CX18_AV_COMPOSITE1 + 1);
} else {
- CX18_INFO_DEV(sd, "Specified video input: "
- "S-Video (Luma In%d, Chroma In%d)\n",
+ CX18_INFO_DEV(sd, "Specified video input: S-Video (Luma In%d, Chroma In%d)\n",
(vid_input & 0xf0) >> 4,
(vid_input & 0xf00) >> 8);
}
diff --git a/drivers/media/pci/cx18/cx18-av-firmware.c b/drivers/media/pci/cx18/cx18-av-firmware.c
index a34fd082b76e..160e2e53383f 100644
--- a/drivers/media/pci/cx18/cx18-av-firmware.c
+++ b/drivers/media/pci/cx18/cx18-av-firmware.c
@@ -61,8 +61,7 @@ static int cx18_av_verifyfw(struct cx18 *cx, const struct firmware *fw)
dl_control &= 0xffff3fff; /* ignore top 2 bits of address */
expected = 0x0f000000 | ((u32)data[addr] << 16) | addr;
if (expected != dl_control) {
- CX18_ERR_DEV(sd, "verification of %s firmware load "
- "failed: expected %#010x got %#010x\n",
+ CX18_ERR_DEV(sd, "verification of %s firmware load failed: expected %#010x got %#010x\n",
FWFILE, expected, dl_control);
ret = -EIO;
break;
diff --git a/drivers/media/pci/cx18/cx18-controls.c b/drivers/media/pci/cx18/cx18-controls.c
index adb5a8c72c06..812a2507945a 100644
--- a/drivers/media/pci/cx18/cx18-controls.c
+++ b/drivers/media/pci/cx18/cx18-controls.c
@@ -44,8 +44,7 @@ static int cx18_s_stream_vbi_fmt(struct cx2341x_handler *cxhdl, u32 fmt)
type == V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD)) {
/* Only IVTV fmt VBI insertion & only MPEG-2 PS type streams */
cx->vbi.insert_mpeg = V4L2_MPEG_STREAM_VBI_FMT_NONE;
- CX18_DEBUG_INFO("disabled insertion of sliced VBI data into "
- "the MPEG stream\n");
+ CX18_DEBUG_INFO("disabled insertion of sliced VBI data into the MPEG stream\n");
return 0;
}
@@ -63,16 +62,14 @@ static int cx18_s_stream_vbi_fmt(struct cx2341x_handler *cxhdl, u32 fmt)
}
cx->vbi.insert_mpeg =
V4L2_MPEG_STREAM_VBI_FMT_NONE;
- CX18_WARN("Unable to allocate buffers for "
- "sliced VBI data insertion\n");
+ CX18_WARN("Unable to allocate buffers for sliced VBI data insertion\n");
return -ENOMEM;
}
}
}
cx->vbi.insert_mpeg = fmt;
- CX18_DEBUG_INFO("enabled insertion of sliced VBI data into the MPEG PS,"
- "when sliced VBI is enabled\n");
+ CX18_DEBUG_INFO("enabled insertion of sliced VBI data into the MPEG PS,when sliced VBI is enabled\n");
/*
* If our current settings have no lines set for capture, store a valid,
diff --git a/drivers/media/pci/cx18/cx18-driver.c b/drivers/media/pci/cx18/cx18-driver.c
index 2f23b26b16c0..9e1b0d78a65a 100644
--- a/drivers/media/pci/cx18/cx18-driver.c
+++ b/drivers/media/pci/cx18/cx18-driver.c
@@ -405,8 +405,7 @@ static void cx18_process_eeprom(struct cx18 *cx)
CX18_ERR("Invalid EEPROM\n");
return;
default:
- CX18_ERR("Unknown model %d, defaulting to original HVR-1600 "
- "(cardtype=1)\n", tv.model);
+ CX18_ERR("Unknown model %d, defaulting to original HVR-1600 (cardtype=1)\n", tv.model);
cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT);
break;
}
@@ -635,8 +634,7 @@ static void cx18_process_options(struct cx18 *cx)
/* convert from kB to bytes */
cx->stream_buf_size[i] *= 1024;
}
- CX18_DEBUG_INFO("Stream type %d options: %d MB, %d buffers, "
- "%d bytes\n", i, cx->options.megabytes[i],
+ CX18_DEBUG_INFO("Stream type %d options: %d MB, %d buffers, %d bytes\n", i, cx->options.megabytes[i],
cx->stream_buffers[i], cx->stream_buf_size[i]);
}
@@ -838,14 +836,12 @@ static int cx18_setup_pci(struct cx18 *cx, struct pci_dev *pci_dev,
pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &pci_latency);
if (pci_latency < 64 && cx18_pci_latency) {
- CX18_INFO("Unreasonably low latency timer, "
- "setting to 64 (was %d)\n", pci_latency);
+ CX18_INFO("Unreasonably low latency timer, setting to 64 (was %d)\n", pci_latency);
pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, 64);
pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &pci_latency);
}
- CX18_DEBUG_INFO("cx%d (rev %d) at %02x:%02x.%x, "
- "irq: %d, latency: %d, memory: 0x%llx\n",
+ CX18_DEBUG_INFO("cx%d (rev %d) at %02x:%02x.%x, irq: %d, latency: %d, memory: 0x%llx\n",
cx->pci_dev->device, cx->card_rev, pci_dev->bus->number,
PCI_SLOT(pci_dev->devfn), PCI_FUNC(pci_dev->devfn),
cx->pci_dev->irq, pci_latency, (u64)cx->base_addr);
@@ -910,8 +906,7 @@ static int cx18_probe(struct pci_dev *pci_dev,
/* FIXME - module parameter arrays constrain max instances */
i = atomic_inc_return(&cx18_instance) - 1;
if (i >= CX18_MAX_CARDS) {
- printk(KERN_ERR "cx18: cannot manage card %d, driver has a "
- "limit of 0 - %d\n", i, CX18_MAX_CARDS - 1);
+ printk(KERN_ERR "cx18: cannot manage card %d, driver has a limit of 0 - %d\n", i, CX18_MAX_CARDS - 1);
return -ENOMEM;
}
@@ -926,8 +921,7 @@ static int cx18_probe(struct pci_dev *pci_dev,
retval = v4l2_device_register(&pci_dev->dev, &cx->v4l2_dev);
if (retval) {
- printk(KERN_ERR "cx18: v4l2_device_register of card %d failed"
- "\n", cx->instance);
+ printk(KERN_ERR "cx18: v4l2_device_register of card %d failed\n", cx->instance);
kfree(cx);
return retval;
}
@@ -958,13 +952,10 @@ static int cx18_probe(struct pci_dev *pci_dev,
cx->enc_mem = ioremap_nocache(cx->base_addr + CX18_MEM_OFFSET,
CX18_MEM_SIZE);
if (!cx->enc_mem) {
- CX18_ERR("ioremap failed. Can't get a window into CX23418 "
- "memory and register space\n");
- CX18_ERR("Each capture card with a CX23418 needs 64 MB of "
- "vmalloc address space for the window\n");
+ CX18_ERR("ioremap failed. Can't get a window into CX23418 memory and register space\n");
+ CX18_ERR("Each capture card with a CX23418 needs 64 MB of vmalloc address space for the window\n");
CX18_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
- CX18_ERR("Use the vmalloc= kernel command line option to set "
- "VmallocTotal to a larger value\n");
+ CX18_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n");
retval = -ENOMEM;
goto free_mem;
}
@@ -1000,8 +991,7 @@ static int cx18_probe(struct pci_dev *pci_dev,
/* Initialize GPIO Reset Controller to do chip resets during i2c init */
if (cx->card->hw_all & CX18_HW_GPIO_RESET_CTRL) {
if (cx18_gpio_register(cx, CX18_HW_GPIO_RESET_CTRL) != 0)
- CX18_WARN("Could not register GPIO reset controller"
- "subdevice; proceeding anyway.\n");
+ CX18_WARN("Could not register GPIO reset controllersubdevice; proceeding anyway.\n");
else
cx->hw_flags |= CX18_HW_GPIO_RESET_CTRL;
}
diff --git a/drivers/media/pci/cx18/cx18-dvb.c b/drivers/media/pci/cx18/cx18-dvb.c
index 3eac59c51231..03d0478170a7 100644
--- a/drivers/media/pci/cx18/cx18-dvb.c
+++ b/drivers/media/pci/cx18/cx18-dvb.c
@@ -155,10 +155,8 @@ static int yuan_mpc718_mt352_reqfw(struct cx18_stream *stream,
}
if (ret) {
- CX18_ERR("The MPC718 board variant with the MT352 DVB-T"
- "demodualtor will not work without it\n");
- CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware "
- "mpc718' if you need the firmware\n");
+ CX18_ERR("The MPC718 board variant with the MT352 DVB-Tdemodualtor will not work without it\n");
+ CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware mpc718' if you need the firmware\n");
}
return ret;
}
diff --git a/drivers/media/pci/cx18/cx18-fileops.c b/drivers/media/pci/cx18/cx18-fileops.c
index df837408efd5..78b399b8613e 100644
--- a/drivers/media/pci/cx18/cx18-fileops.c
+++ b/drivers/media/pci/cx18/cx18-fileops.c
@@ -49,8 +49,7 @@ int cx18_claim_stream(struct cx18_open_id *id, int type)
/* Nothing should ever try to directly claim the IDX stream */
if (type == CX18_ENC_STREAM_TYPE_IDX) {
- CX18_WARN("MPEG Index stream cannot be claimed "
- "directly, but something tried.\n");
+ CX18_WARN("MPEG Index stream cannot be claimed directly, but something tried.\n");
return -EINVAL;
}
@@ -728,8 +727,7 @@ void cx18_stop_capture(struct cx18_open_id *id, int gop_end)
/* Stop internal use associated VBI and IDX streams */
if (test_bit(CX18_F_S_STREAMING, &s_vbi->s_flags) &&
!test_bit(CX18_F_S_APPL_IO, &s_vbi->s_flags)) {
- CX18_DEBUG_INFO("close stopping embedded VBI "
- "capture\n");
+ CX18_DEBUG_INFO("close stopping embedded VBI capture\n");
cx18_stop_v4l2_encode_stream(s_vbi, 0);
}
if (test_bit(CX18_F_S_STREAMING, &s_idx->s_flags)) {
diff --git a/drivers/media/pci/cx18/cx18-ioctl.c b/drivers/media/pci/cx18/cx18-ioctl.c
index fecca2a63891..0faeb979ceb9 100644
--- a/drivers/media/pci/cx18/cx18-ioctl.c
+++ b/drivers/media/pci/cx18/cx18-ioctl.c
@@ -951,8 +951,7 @@ static int cx18_encoder_cmd(struct file *file, void *fh,
return 0;
h = cx18_find_handle(cx);
if (h == CX18_INVALID_TASK_HANDLE) {
- CX18_ERR("Can't find valid task handle for "
- "V4L2_ENC_CMD_PAUSE\n");
+ CX18_ERR("Can't find valid task handle for V4L2_ENC_CMD_PAUSE\n");
return -EBADFD;
}
cx18_mute(cx);
@@ -968,8 +967,7 @@ static int cx18_encoder_cmd(struct file *file, void *fh,
return 0;
h = cx18_find_handle(cx);
if (h == CX18_INVALID_TASK_HANDLE) {
- CX18_ERR("Can't find valid task handle for "
- "V4L2_ENC_CMD_RESUME\n");
+ CX18_ERR("Can't find valid task handle for V4L2_ENC_CMD_RESUME\n");
return -EBADFD;
}
cx18_vapi(cx, CX18_CPU_CAPTURE_RESUME, 1, h);
diff --git a/drivers/media/pci/cx18/cx18-irq.c b/drivers/media/pci/cx18/cx18-irq.c
index 80edfe93a3d8..be4e06581c18 100644
--- a/drivers/media/pci/cx18/cx18-irq.c
+++ b/drivers/media/pci/cx18/cx18-irq.c
@@ -59,8 +59,7 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id)
cx18_write_reg_expect(cx, hw2, HW2_INT_CLR_STATUS, ~hw2, hw2);
if (sw1 || sw2 || hw2)
- CX18_DEBUG_HI_IRQ("received interrupts "
- "SW1: %x SW2: %x HW2: %x\n", sw1, sw2, hw2);
+ CX18_DEBUG_HI_IRQ("received interrupts SW1: %x SW2: %x HW2: %x\n", sw1, sw2, hw2);
/*
* SW1 responses have to happen first. The sending XPU times out the
diff --git a/drivers/media/pci/cx18/cx18-mailbox.c b/drivers/media/pci/cx18/cx18-mailbox.c
index 1f8aa9a749a1..ac24fb0dbf46 100644
--- a/drivers/media/pci/cx18/cx18-mailbox.c
+++ b/drivers/media/pci/cx18/cx18-mailbox.c
@@ -123,8 +123,7 @@ static void dump_mb(struct cx18 *cx, struct cx18_mailbox *mb, char *name)
if (!(cx18_debug & CX18_DBGFLG_API))
return;
- CX18_DEBUG_API("%s: req %#010x ack %#010x cmd %#010x err %#010x args%s"
- "\n", name, mb->request, mb->ack, mb->cmd, mb->error,
+ CX18_DEBUG_API("%s: req %#010x ack %#010x cmd %#010x err %#010x args%s\n", name, mb->request, mb->ack, mb->cmd, mb->error,
u32arr2hex(mb->args, MAX_MB_ARGUMENTS, argstr));
}
@@ -255,8 +254,7 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_in_work_order *order)
s = cx18_handle_to_stream(cx, handle);
if (s == NULL) {
- CX18_WARN("Got DMA done notification for unknown/inactive"
- " handle %d, %s mailbox seq no %d\n", handle,
+ CX18_WARN("Got DMA done notification for unknown/inactive handle %d, %s mailbox seq no %d\n", handle,
(order->flags & CX18_F_EWO_MB_STALE_UPON_RECEIPT) ?
"stale" : "good", mb->request);
return;
@@ -290,9 +288,7 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_in_work_order *order)
if ((order->flags & CX18_F_EWO_MB_STALE_UPON_RECEIPT) &&
!(id >= s->mdl_base_idx &&
id < (s->mdl_base_idx + s->buffers))) {
- CX18_WARN("Fell behind! Ignoring stale mailbox with "
- " inconsistent data. Lost MDL for mailbox "
- "seq no %d\n", mb->request);
+ CX18_WARN("Fell behind! Ignoring stale mailbox with inconsistent data. Lost MDL for mailbox seq no %d\n", mb->request);
break;
}
mdl = cx18_queue_get_mdl(s, id, mdl_ack->data_used);
@@ -418,9 +414,7 @@ static void mb_ack_irq(struct cx18 *cx, struct cx18_in_work_order *order)
/* Don't ack if the RPU has gotten impatient and timed us out */
if (req != cx18_readl(cx, &ack_mb->request) ||
req == cx18_readl(cx, &ack_mb->ack)) {
- CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our "
- "incoming %s to EPU mailbox (sequence no. %u) "
- "while processing\n",
+ CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our incoming %s to EPU mailbox (sequence no. %u) while processing\n",
rpu_str[order->rpu], rpu_str[order->rpu], req);
order->flags |= CX18_F_EWO_MB_STALE_WHILE_PROC;
return;
@@ -555,8 +549,7 @@ void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu)
order = alloc_in_work_order_irq(cx);
if (order == NULL) {
- CX18_WARN("Unable to find blank work order form to schedule "
- "incoming mailbox command processing\n");
+ CX18_WARN("Unable to find blank work order form to schedule incoming mailbox command processing\n");
return;
}
@@ -573,9 +566,7 @@ void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu)
(&order_mb->request)[i] = cx18_readl(cx, &mb->request + i);
if (order_mb->request == order_mb->ack) {
- CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our "
- "incoming %s to EPU mailbox (sequence no. %u)"
- "\n",
+ CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our incoming %s to EPU mailbox (sequence no. %u)\n",
rpu_str[rpu], rpu_str[rpu], order_mb->request);
if (cx18_debug & CX18_DBGFLG_WARN)
dump_mb(cx, order_mb, "incoming");
@@ -663,8 +654,7 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
if (req != ack) {
/* waited long enough, make the mbox "not busy" from our end */
cx18_writel(cx, req, &mb->ack);
- CX18_ERR("mbox was found stuck busy when setting up for %s; "
- "clearing busy and trying to proceed\n", info->name);
+ CX18_ERR("mbox was found stuck busy when setting up for %s; clearing busy and trying to proceed\n", info->name);
} else if (ret != timeout)
CX18_DEBUG_API("waited %u msecs for busy mbox to be acked\n",
jiffies_to_msecs(timeout-ret));
@@ -707,14 +697,10 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
mutex_unlock(mb_lock);
if (ret >= timeout) {
/* Timed out */
- CX18_DEBUG_WARN("sending %s timed out waiting %d msecs "
- "for RPU acknowledgement\n",
+ CX18_DEBUG_WARN("sending %s timed out waiting %d msecs for RPU acknowledgement\n",
info->name, jiffies_to_msecs(ret));
} else {
- CX18_DEBUG_WARN("woken up before mailbox ack was ready "
- "after submitting %s to RPU. only "
- "waited %d msecs on req %u but awakened"
- " with unmatched ack %u\n",
+ CX18_DEBUG_WARN("woken up before mailbox ack was ready after submitting %s to RPU. only waited %d msecs on req %u but awakened with unmatched ack %u\n",
info->name,
jiffies_to_msecs(ret),
req, ack);
@@ -723,8 +709,7 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
}
if (ret >= timeout)
- CX18_DEBUG_WARN("failed to be awakened upon RPU acknowledgment "
- "sending %s; timed out waiting %d msecs\n",
+ CX18_DEBUG_WARN("failed to be awakened upon RPU acknowledgment sending %s; timed out waiting %d msecs\n",
info->name, jiffies_to_msecs(ret));
else
CX18_DEBUG_HI_API("waited %u msecs for %s to be acked\n",
diff --git a/drivers/media/pci/cx18/cx18-queue.c b/drivers/media/pci/cx18/cx18-queue.c
index 2a247d264b87..4dfde3959ecb 100644
--- a/drivers/media/pci/cx18/cx18-queue.c
+++ b/drivers/media/pci/cx18/cx18-queue.c
@@ -164,9 +164,7 @@ struct cx18_mdl *cx18_queue_get_mdl(struct cx18_stream *s, u32 id,
mdl->skipped++;
if (mdl->skipped >= atomic_read(&s->q_busy.depth)-1) {
/* mdl must have fallen out of rotation */
- CX18_WARN("Skipped %s, MDL %d, %d "
- "times - it must have dropped out of "
- "rotation\n", s->name, mdl->id,
+ CX18_WARN("Skipped %s, MDL %d, %d times - it must have dropped out of rotation\n", s->name, mdl->id,
mdl->skipped);
/* Sweep it up to put it back into rotation */
list_move_tail(&mdl->list, &sweep_up);
@@ -352,8 +350,7 @@ int cx18_stream_alloc(struct cx18_stream *s)
if (s->buffers == 0)
return 0;
- CX18_DEBUG_INFO("Allocate %s stream: %d x %d buffers "
- "(%d.%02d kB total)\n",
+ CX18_DEBUG_INFO("Allocate %s stream: %d x %d buffers (%d.%02d kB total)\n",
s->name, s->buffers, s->buf_size,
s->buffers * s->buf_size / 1024,
(s->buffers * s->buf_size * 100 / 1024) % 100);
diff --git a/drivers/media/pci/cx18/cx18-streams.c b/drivers/media/pci/cx18/cx18-streams.c
index f3802ec1b383..d4b1207baee5 100644
--- a/drivers/media/pci/cx18/cx18-streams.c
+++ b/drivers/media/pci/cx18/cx18-streams.c
@@ -353,8 +353,7 @@ static int cx18_prep_dev(struct cx18 *cx, int type)
if (cx->card->hw_all & CX18_HW_DVB) {
s->dvb = kzalloc(sizeof(struct cx18_dvb), GFP_KERNEL);
if (s->dvb == NULL) {
- CX18_ERR("Couldn't allocate cx18_dvb structure"
- " for %s\n", s->name);
+ CX18_ERR("Couldn't allocate cx18_dvb structure for %s\n", s->name);
return -ENOMEM;
}
} else {
@@ -462,8 +461,7 @@ static int cx18_reg_dev(struct cx18 *cx, int type)
case VFL_TYPE_VBI:
if (cx->stream_buffers[type])
- CX18_INFO("Registered device %s for %s "
- "(%d x %d bytes)\n",
+ CX18_INFO("Registered device %s for %s (%d x %d bytes)\n",
name, s->name, cx->stream_buffers[type],
cx->stream_buf_size[type]);
else
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 10/57] [media] cx23885: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (8 preceding siblings ...)
2016-10-14 20:19 ` [PATCH 09/57] [media] cx18: " Mauro Carvalho Chehab
@ 2016-10-14 20:19 ` Mauro Carvalho Chehab
2016-10-14 20:19 ` [PATCH 11/57] [media] cx88: " Mauro Carvalho Chehab
` (47 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:19 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Hans Verkuil,
Arnd Bergmann, Junghak Sung, Laurent Pinchart, Julia Lawall,
Andrey Utkin, Stephen Backway, Devin Heitmueller, Andrew Morton,
Inki Dae, Geunyoung Kim, Olli Salonen, Matthias Schwarzott,
Seung-Woo Kim
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/pci/cx23885/cimax2.c | 4 +---
drivers/media/pci/cx23885/cx23885-417.c | 15 +++++----------
drivers/media/pci/cx23885/cx23885-alsa.c | 12 ++++--------
drivers/media/pci/cx23885/cx23885-cards.c | 7 ++-----
drivers/media/pci/cx23885/cx23885-core.c | 12 ++++--------
drivers/media/pci/cx23885/cx23885-dvb.c | 3 +--
drivers/media/pci/cx23885/cx23885-video.c | 3 +--
drivers/media/pci/cx23885/cx23888-ir.c | 6 ++----
8 files changed, 20 insertions(+), 42 deletions(-)
diff --git a/drivers/media/pci/cx23885/cimax2.c b/drivers/media/pci/cx23885/cimax2.c
index 631e4f24aea6..fdc54f0e60c6 100644
--- a/drivers/media/pci/cx23885/cimax2.c
+++ b/drivers/media/pci/cx23885/cimax2.c
@@ -365,9 +365,7 @@ static void netup_read_ci_status(struct work_struct *work)
if (ret != 0)
return;
- ci_dbg_print("%s: Slot Status Addr=[0x%04x], "
- "Reg=[0x%02x], data=%02x, "
- "TS config = %02x\n", __func__,
+ ci_dbg_print("%s: Slot Status Addr=[0x%04x], Reg=[0x%02x], data=%02x, TS config = %02x\n", __func__,
state->ci_i2c_addr, 0, buf[0],
buf[0]);
diff --git a/drivers/media/pci/cx23885/cx23885-417.c b/drivers/media/pci/cx23885/cx23885-417.c
index da892f3e3c29..ab3c99e7cb8b 100644
--- a/drivers/media/pci/cx23885/cx23885-417.c
+++ b/drivers/media/pci/cx23885/cx23885-417.c
@@ -770,8 +770,7 @@ static int cx23885_mbox_func(void *priv,
mc417_memory_read(dev, dev->cx23417_mailbox - 4, &value);
if (value != 0x12345678) {
printk(KERN_ERR
- "Firmware and/or mailbox pointer not initialized "
- "or corrupted, signature = 0x%x, cmd = %s\n", value,
+ "Firmware and/or mailbox pointer not initialized or corrupted, signature = 0x%x, cmd = %s\n", value,
cmd_to_str(command));
return -1;
}
@@ -781,8 +780,7 @@ static int cx23885_mbox_func(void *priv,
*/
mc417_memory_read(dev, dev->cx23417_mailbox, &flag);
if (flag) {
- printk(KERN_ERR "ERROR: Mailbox appears to be in use "
- "(%x), cmd = %s\n", flag, cmd_to_str(command));
+ printk(KERN_ERR "ERROR: Mailbox appears to be in use (%x), cmd = %s\n", flag, cmd_to_str(command));
return -1;
}
@@ -935,14 +933,12 @@ static int cx23885_load_firmware(struct cx23885_dev *dev)
printk(KERN_ERR
"ERROR: Hotplug firmware request failed (%s).\n",
CX23885_FIRM_IMAGE_NAME);
- printk(KERN_ERR "Please fix your hotplug setup, the board will "
- "not work without firmware loaded!\n");
+ printk(KERN_ERR "Please fix your hotplug setup, the board will not work without firmware loaded!\n");
return -1;
}
if (firmware->size != CX23885_FIRM_IMAGE_SIZE) {
- printk(KERN_ERR "ERROR: Firmware size mismatch "
- "(have %zu, expected %d)\n",
+ printk(KERN_ERR "ERROR: Firmware size mismatch (have %zu, expected %d)\n",
firmware->size, CX23885_FIRM_IMAGE_SIZE);
release_firmware(firmware);
return -1;
@@ -1077,8 +1073,7 @@ static int cx23885_initialize_codec(struct cx23885_dev *dev, int startencoder)
retval = cx23885_api_cmd(dev, CX2341X_ENC_GET_VERSION, 0, 1,
&version);
if (retval < 0) {
- printk(KERN_ERR "ERROR: cx23417 firmware get encoder :"
- "version failed!\n");
+ printk(KERN_ERR "ERROR: cx23417 firmware get encoder :version failed!\n");
return -1;
}
dprintk(1, "cx23417 firmware version is 0x%08x\n", version);
diff --git a/drivers/media/pci/cx23885/cx23885-alsa.c b/drivers/media/pci/cx23885/cx23885-alsa.c
index 6115d4e148ba..3404f1e584a8 100644
--- a/drivers/media/pci/cx23885/cx23885-alsa.c
+++ b/drivers/media/pci/cx23885/cx23885-alsa.c
@@ -186,8 +186,7 @@ static int cx23885_start_audio_dma(struct cx23885_audio_dev *chip)
cx_write(AUD_INT_A_GPCNT_CTL, GP_COUNT_CONTROL_RESET);
atomic_set(&chip->count, 0);
- dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d "
- "byte buffer\n", buf->bpl, cx_read(audio_ch->cmds_start+12)>>1,
+ dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d byte buffer\n", buf->bpl, cx_read(audio_ch->cmds_start+12)>>1,
chip->num_periods, buf->bpl * chip->num_periods);
/* Enables corresponding bits at AUD_INT_STAT */
@@ -327,8 +326,7 @@ static int snd_cx23885_pcm_open(struct snd_pcm_substream *substream)
int err;
if (!chip) {
- printk(KERN_ERR "BUG: cx23885 can't find device struct."
- " Can't proceed with open\n");
+ printk(KERN_ERR "BUG: cx23885 can't find device struct. Can't proceed with open\n");
return -ENODEV;
}
@@ -555,8 +553,7 @@ struct cx23885_audio_dev *cx23885_audio_register(struct cx23885_dev *dev)
return NULL;
if (dev->sram_channels[AUDIO_SRAM_CHANNEL].cmds_start == 0) {
- printk(KERN_WARNING "%s(): Missing SRAM channel configuration "
- "for analog TV Audio\n", __func__);
+ printk(KERN_WARNING "%s(): Missing SRAM channel configuration for analog TV Audio\n", __func__);
return NULL;
}
@@ -590,8 +587,7 @@ struct cx23885_audio_dev *cx23885_audio_register(struct cx23885_dev *dev)
error:
snd_card_free(card);
- printk(KERN_ERR "%s(): Failed to register analog "
- "audio adapter\n", __func__);
+ printk(KERN_ERR "%s(): Failed to register analog audio adapter\n", __func__);
return NULL;
}
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
index 99ba8d6328f0..e0cbb0405837 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -1304,8 +1304,7 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
*/
break;
default:
- printk(KERN_WARNING "%s: warning: "
- "unknown hauppauge model #%d\n",
+ printk(KERN_WARNING "%s: warning: unknown hauppauge model #%d\n",
dev->name, tv.model);
break;
}
@@ -2342,9 +2341,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
ret = request_firmware(&fw, filename, &dev->pci->dev);
if (ret != 0)
- printk(KERN_ERR "did not find the firmware file. (%s) "
- "Please see linux/Documentation/dvb/ for more details "
- "on firmware-problems.", filename);
+ printk(KERN_ERR "did not find the firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems.", filename);
else
altera_init(&netup_config, fw);
diff --git a/drivers/media/pci/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c
index c86b1093ab99..405128a07e4f 100644
--- a/drivers/media/pci/cx23885/cx23885-core.c
+++ b/drivers/media/pci/cx23885/cx23885-core.c
@@ -915,8 +915,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
cx23885_init_tsport(dev, &dev->ts2, 2);
if (get_resources(dev) < 0) {
- printk(KERN_ERR "CORE %s No more PCIe resources for "
- "subsystem: %04x:%04x\n",
+ printk(KERN_ERR "CORE %s No more PCIe resources for subsystem: %04x:%04x\n",
dev->name, dev->pci->subsystem_vendor,
dev->pci->subsystem_device);
@@ -980,8 +979,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO) {
if (cx23885_video_register(dev) < 0) {
- printk(KERN_ERR "%s() Failed to register analog "
- "video adapters on VID_A\n", __func__);
+ printk(KERN_ERR "%s() Failed to register analog video adapters on VID_A\n", __func__);
}
}
@@ -1579,8 +1577,7 @@ int cx23885_irq_417(struct cx23885_dev *dev, u32 status)
(status & VID_B_MSK_VBI_SYNC) ||
(status & VID_B_MSK_OF) ||
(status & VID_B_MSK_VBI_OF)) {
- printk(KERN_ERR "%s: V4L mpeg risc op code error, status "
- "= 0x%x\n", dev->name, status);
+ printk(KERN_ERR "%s: V4L mpeg risc op code error, status = 0x%x\n", dev->name, status);
if (status & VID_B_MSK_BAD_PKT)
dprintk(1, " VID_B_MSK_BAD_PKT\n");
if (status & VID_B_MSK_OPC_ERR)
@@ -1995,8 +1992,7 @@ static int cx23885_initdev(struct pci_dev *pci_dev,
/* print pci info */
dev->pci_rev = pci_dev->revision;
pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat);
- printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, "
- "latency: %d, mmio: 0x%llx\n", dev->name,
+ printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n", dev->name,
pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
dev->pci_lat,
(unsigned long long)pci_resource_start(pci_dev, 0));
diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c
index 818f3c2fc98d..42413fa423b4 100644
--- a/drivers/media/pci/cx23885/cx23885-dvb.c
+++ b/drivers/media/pci/cx23885/cx23885-dvb.c
@@ -2482,8 +2482,7 @@ static int dvb_register(struct cx23885_tsport *port)
break;
default:
- printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
- " isn't supported yet\n",
+ printk(KERN_INFO "%s: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->name);
break;
}
diff --git a/drivers/media/pci/cx23885/cx23885-video.c b/drivers/media/pci/cx23885/cx23885-video.c
index 33d168ef278d..92ff452e5886 100644
--- a/drivers/media/pci/cx23885/cx23885-video.c
+++ b/drivers/media/pci/cx23885/cx23885-video.c
@@ -1065,8 +1065,7 @@ int cx23885_video_irq(struct cx23885_dev *dev, u32 status)
}
if (status & VID_BC_MSK_SYNC)
- dprintk(7, " (VID_BC_MSK_SYNC 0x%08x) "
- "video lines miss-match\n",
+ dprintk(7, " (VID_BC_MSK_SYNC 0x%08x) video lines miss-match\n",
VID_BC_MSK_SYNC);
if (status & VID_BC_MSK_OF)
diff --git a/drivers/media/pci/cx23885/cx23888-ir.c b/drivers/media/pci/cx23885/cx23888-ir.c
index c1aa888af705..6ac387c648d4 100644
--- a/drivers/media/pci/cx23885/cx23888-ir.c
+++ b/drivers/media/pci/cx23885/cx23888-ir.c
@@ -1015,8 +1015,7 @@ static int cx23888_ir_log_status(struct v4l2_subdev *sd)
j = 0;
break;
}
- v4l2_info(sd, "\tNext carrier edge window: 16 clocks "
- "-%1d/+%1d, %u to %u Hz\n", i, j,
+ v4l2_info(sd, "\tNext carrier edge window: 16 clocks -%1d/+%1d, %u to %u Hz\n", i, j,
clock_divider_to_freq(rxclk, 16 + j),
clock_divider_to_freq(rxclk, 16 - i));
}
@@ -1026,8 +1025,7 @@ static int cx23888_ir_log_status(struct v4l2_subdev *sd)
v4l2_info(sd, "\tLow pass filter: %s\n",
filtr ? "enabled" : "disabled");
if (filtr)
- v4l2_info(sd, "\tMin acceptable pulse width (LPF): %u us, "
- "%u ns\n",
+ v4l2_info(sd, "\tMin acceptable pulse width (LPF): %u us, %u ns\n",
lpf_count_to_us(filtr),
lpf_count_to_ns(filtr));
v4l2_info(sd, "\tPulse width timer timed-out: %s\n",
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 11/57] [media] cx88: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (9 preceding siblings ...)
2016-10-14 20:19 ` [PATCH 10/57] [media] cx23885: " Mauro Carvalho Chehab
@ 2016-10-14 20:19 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 12/57] [media] ddbridge: " Mauro Carvalho Chehab
` (46 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:19 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Andrew Morton,
Hans Verkuil, Andrey Utkin, Arnd Bergmann, Julia Lawall,
Laurent Pinchart, Junghak Sung, Inki Dae
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/pci/cx88/cx88-alsa.c | 13 ++++---------
drivers/media/pci/cx88/cx88-cards.c | 12 ++++--------
drivers/media/pci/cx88/cx88-dsp.c | 9 +++------
drivers/media/pci/cx88/cx88-dvb.c | 6 ++----
drivers/media/pci/cx88/cx88-i2c.c | 3 +--
drivers/media/pci/cx88/cx88-mpeg.c | 12 ++++--------
drivers/media/pci/cx88/cx88-tvaudio.c | 6 ++----
drivers/media/pci/cx88/cx88-video.c | 3 +--
8 files changed, 21 insertions(+), 43 deletions(-)
diff --git a/drivers/media/pci/cx88/cx88-alsa.c b/drivers/media/pci/cx88/cx88-alsa.c
index 723f06462104..099f14173cb4 100644
--- a/drivers/media/pci/cx88/cx88-alsa.c
+++ b/drivers/media/pci/cx88/cx88-alsa.c
@@ -120,9 +120,7 @@ MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
MODULE_LICENSE("GPL");
MODULE_VERSION(CX88_VERSION);
-MODULE_SUPPORTED_DEVICE("{{Conexant,23881},"
- "{{Conexant,23882},"
- "{{Conexant,23883}");
+MODULE_SUPPORTED_DEVICE("{{Conexant,23881},{{Conexant,23882},{{Conexant,23883}");
static unsigned int debug;
module_param(debug,int,0644);
MODULE_PARM_DESC(debug,"enable debug messages");
@@ -154,8 +152,7 @@ static int _cx88_start_audio_dma(snd_cx88_card_t *chip)
cx_write(MO_AUDD_GPCNTRL, GP_COUNT_CONTROL_RESET);
atomic_set(&chip->count, 0);
- dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d "
- "byte buffer\n", buf->bpl, cx_read(audio_ch->cmds_start + 8)>>1,
+ dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d byte buffer\n", buf->bpl, cx_read(audio_ch->cmds_start + 8)>>1,
chip->num_periods, buf->bpl * chip->num_periods);
/* Enables corresponding bits at AUD_INT_STAT */
@@ -425,8 +422,7 @@ static int snd_cx88_pcm_open(struct snd_pcm_substream *substream)
int err;
if (!chip) {
- printk(KERN_ERR "BUG: cx88 can't find device struct."
- " Can't proceed with open\n");
+ printk(KERN_ERR "BUG: cx88 can't find device struct. Can't proceed with open\n");
return -ENODEV;
}
@@ -914,8 +910,7 @@ static int snd_cx88_create(struct snd_card *card, struct pci_dev *pci,
/* print pci info */
pci_read_config_byte(pci, PCI_LATENCY_TIMER, &pci_lat);
- dprintk(1,"ALSA %s/%i: found at %s, rev: %d, irq: %d, "
- "latency: %d, mmio: 0x%llx\n", core->name, devno,
+ dprintk(1,"ALSA %s/%i: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n", core->name, devno,
pci_name(pci), pci->revision, pci->irq,
pci_lat, (unsigned long long)pci_resource_start(pci,0));
diff --git a/drivers/media/pci/cx88/cx88-cards.c b/drivers/media/pci/cx88/cx88-cards.c
index 8f2556ec3971..286d6e2aa590 100644
--- a/drivers/media/pci/cx88/cx88-cards.c
+++ b/drivers/media/pci/cx88/cx88-cards.c
@@ -2847,8 +2847,7 @@ static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data)
break;
}
- info_printk(core, "Leadtek Winfast 2000XP Expert config: "
- "tuner=%d, eeprom[0]=0x%02x\n",
+ info_printk(core, "Leadtek Winfast 2000XP Expert config: tuner=%d, eeprom[0]=0x%02x\n",
core->board.tuner_type, eeprom_data[0]);
}
@@ -3107,8 +3106,7 @@ static void dvico_fusionhdtv_hybrid_init(struct cx88_core *core)
msg.len = (i != 12 ? 5 : 2);
err = i2c_transfer(&core->i2c_adap, &msg, 1);
if (err != 1) {
- warn_printk(core, "dvico_fusionhdtv_hybrid_init buf %d "
- "failed (err = %d)!\n", i, err);
+ warn_printk(core, "dvico_fusionhdtv_hybrid_init buf %d failed (err = %d)!\n", i, err);
return;
}
}
@@ -3284,8 +3282,7 @@ static void cx88_card_list(struct cx88_core *core, struct pci_dev *pci)
"%s: version might help as well.\n",
core->name,core->name,core->name,core->name);
}
- err_printk(core, "Here is a list of valid choices for the card=<n> "
- "insmod option:\n");
+ err_printk(core, "Here is a list of valid choices for the card=<n> insmod option:\n");
for (i = 0; i < ARRAY_SIZE(cx88_boards); i++)
printk(KERN_ERR "%s: card=%d -> %s\n",
core->name, i, cx88_boards[i].name);
@@ -3510,8 +3507,7 @@ static void cx88_card_setup(struct cx88_core *core)
for (i = 0; i < ARRAY_SIZE(buffer); i++)
if (2 != i2c_master_send(&core->i2c_client,
buffer[i],2))
- warn_printk(core, "Unable to enable "
- "tuner(%i).\n", i);
+ warn_printk(core, "Unable to enable tuner(%i).\n", i);
}
break;
case CX88_BOARD_MSI_TVANYWHERE_MASTER:
diff --git a/drivers/media/pci/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c
index a9907265ff66..0de1eebf8ebe 100644
--- a/drivers/media/pci/cx88/cx88-dsp.c
+++ b/drivers/media/pci/cx88/cx88-dsp.c
@@ -186,8 +186,7 @@ static s32 detect_a2_a2m_eiaj(struct cx88_core *core, s16 x[], u32 N)
dual = freq_magnitude(x, N, dual_freq);
noise = noise_magnitude(x, N, FREQ_NOISE_START, FREQ_NOISE_END);
- dprintk(1, "detect a2/a2m/eiaj: carrier=%d, stereo=%d, dual=%d, "
- "noise=%d\n", carrier, stereo, dual, noise);
+ dprintk(1, "detect a2/a2m/eiaj: carrier=%d, stereo=%d, dual=%d, noise=%d\n", carrier, stereo, dual, noise);
if (stereo > dual)
ret = V4L2_TUNER_SUB_STEREO;
@@ -222,8 +221,7 @@ static s32 detect_btsc(struct cx88_core *core, s16 x[], u32 N)
s32 sap = freq_magnitude(x, N, FREQ_BTSC_SAP);
s32 dual_ref = freq_magnitude(x, N, FREQ_BTSC_DUAL_REF);
s32 dual = freq_magnitude(x, N, FREQ_BTSC_DUAL);
- dprintk(1, "detect btsc: dual_ref=%d, dual=%d, sap_ref=%d, sap=%d"
- "\n", dual_ref, dual, sap_ref, sap);
+ dprintk(1, "detect btsc: dual_ref=%d, dual=%d, sap_ref=%d, sap=%d\n", dual_ref, dual, sap_ref, sap);
/* FIXME: Currently not supported */
return UNSET;
}
@@ -241,8 +239,7 @@ static s16 *read_rds_samples(struct cx88_core *core, u32 *N)
u32 current_address = cx_read(srch->ptr1_reg);
u32 offset = (current_address - srch->fifo_start + bpl);
- dprintk(1, "read RDS samples: current_address=%08x (offset=%08x), "
- "sample_count=%d, aud_intstat=%08x\n", current_address,
+ dprintk(1, "read RDS samples: current_address=%08x (offset=%08x), sample_count=%d, aud_intstat=%08x\n", current_address,
current_address - srch->fifo_start, sample_count,
cx_read(MO_AUD_INTSTAT));
diff --git a/drivers/media/pci/cx88/cx88-dvb.c b/drivers/media/pci/cx88/cx88-dvb.c
index ac2392d8887a..fe5fd2a4650b 100644
--- a/drivers/media/pci/cx88/cx88-dvb.c
+++ b/drivers/media/pci/cx88/cx88-dvb.c
@@ -625,8 +625,7 @@ static int attach_xc3028(u8 addr, struct cx8802_dev *dev)
return -EINVAL;
if (!fe0->dvb.frontend) {
- printk(KERN_ERR "%s/2: dvb frontend not attached. "
- "Can't attach xc3028\n",
+ printk(KERN_ERR "%s/2: dvb frontend not attached. Can't attach xc3028\n",
dev->core->name);
return -EINVAL;
}
@@ -665,8 +664,7 @@ static int attach_xc4000(struct cx8802_dev *dev, struct xc4000_config *cfg)
return -EINVAL;
if (!fe0->dvb.frontend) {
- printk(KERN_ERR "%s/2: dvb frontend not attached. "
- "Can't attach xc4000\n",
+ printk(KERN_ERR "%s/2: dvb frontend not attached. Can't attach xc4000\n",
dev->core->name);
return -EINVAL;
}
diff --git a/drivers/media/pci/cx88/cx88-i2c.c b/drivers/media/pci/cx88/cx88-i2c.c
index cf2d69615838..8ee9b9802683 100644
--- a/drivers/media/pci/cx88/cx88-i2c.c
+++ b/drivers/media/pci/cx88/cx88-i2c.c
@@ -45,8 +45,7 @@ MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time");
static unsigned int i2c_udelay = 5;
module_param(i2c_udelay, int, 0644);
-MODULE_PARM_DESC(i2c_udelay,"i2c delay at insmod time, in usecs "
- "(should be 5 or higher). Lower value means higher bus speed.");
+MODULE_PARM_DESC(i2c_udelay,"i2c delay at insmod time, in usecs (should be 5 or higher). Lower value means higher bus speed.");
#define dprintk(level,fmt, arg...) if (i2c_debug >= level) \
printk(KERN_DEBUG "%s: " fmt, core->name , ## arg)
diff --git a/drivers/media/pci/cx88/cx88-mpeg.c b/drivers/media/pci/cx88/cx88-mpeg.c
index 245357adbc25..7ee7bcfe377d 100644
--- a/drivers/media/pci/cx88/cx88-mpeg.c
+++ b/drivers/media/pci/cx88/cx88-mpeg.c
@@ -401,8 +401,7 @@ static int cx8802_init_common(struct cx8802_dev *dev)
dev->pci_rev = dev->pci->revision;
pci_read_config_byte(dev->pci, PCI_LATENCY_TIMER, &dev->pci_lat);
- printk(KERN_INFO "%s/2: found at %s, rev: %d, irq: %d, "
- "latency: %d, mmio: 0x%llx\n", dev->core->name,
+ printk(KERN_INFO "%s/2: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n", dev->core->name,
pci_name(dev->pci), dev->pci_rev, dev->pci->irq,
dev->pci_lat,(unsigned long long)pci_resource_start(dev->pci,0));
@@ -690,8 +689,7 @@ int cx8802_unregister_driver(struct cx8802_driver *drv)
list_del(&d->drvlist);
kfree(d);
} else
- printk(KERN_ERR "%s/2: cx8802 driver remove "
- "failed (%d)\n", dev->core->name, err);
+ printk(KERN_ERR "%s/2: cx8802 driver remove failed (%d)\n", dev->core->name, err);
}
mutex_unlock(&dev->core->lock);
@@ -768,8 +766,7 @@ static void cx8802_remove(struct pci_dev *pci_dev)
struct cx8802_driver *drv, *tmp;
int err;
- printk(KERN_WARNING "%s/2: Trying to remove cx8802 driver "
- "while cx8802 sub-drivers still loaded?!\n",
+ printk(KERN_WARNING "%s/2: Trying to remove cx8802 driver while cx8802 sub-drivers still loaded?!\n",
dev->core->name);
list_for_each_entry_safe(drv, tmp, &dev->drvlist, drvlist) {
@@ -777,8 +774,7 @@ static void cx8802_remove(struct pci_dev *pci_dev)
if (err == 0) {
list_del(&drv->drvlist);
} else
- printk(KERN_ERR "%s/2: cx8802 driver remove "
- "failed (%d)\n", dev->core->name, err);
+ printk(KERN_ERR "%s/2: cx8802 driver remove failed (%d)\n", dev->core->name, err);
kfree(drv);
}
}
diff --git a/drivers/media/pci/cx88/cx88-tvaudio.c b/drivers/media/pci/cx88/cx88-tvaudio.c
index 6bbce6ad6295..dd8e6f324204 100644
--- a/drivers/media/pci/cx88/cx88-tvaudio.c
+++ b/drivers/media/pci/cx88/cx88-tvaudio.c
@@ -62,8 +62,7 @@ MODULE_PARM_DESC(always_analog,"force analog audio out");
static unsigned int radio_deemphasis;
module_param(radio_deemphasis,int,0644);
-MODULE_PARM_DESC(radio_deemphasis, "Radio deemphasis time constant, "
- "0=None, 1=50us (elsewhere), 2=75us (USA)");
+MODULE_PARM_DESC(radio_deemphasis, "Radio deemphasis time constant, 0=None, 1=50us (elsewhere), 2=75us (USA)");
#define dprintk(fmt, arg...) if (audio_debug) \
printk(KERN_DEBUG "%s/0: " fmt, core->name , ## arg)
@@ -976,8 +975,7 @@ void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual)
}
if (UNSET != ctl) {
- dprintk("cx88_set_stereo: mask 0x%x, ctl 0x%x "
- "[status=0x%x,ctl=0x%x,vol=0x%x]\n",
+ dprintk("cx88_set_stereo: mask 0x%x, ctl 0x%x [status=0x%x,ctl=0x%x,vol=0x%x]\n",
mask, ctl, cx_read(AUD_STATUS),
cx_read(AUD_CTL), cx_sread(SHADOW_AUD_VOL_CTL));
cx_andor(AUD_CTL, mask, ctl);
diff --git a/drivers/media/pci/cx88/cx88-video.c b/drivers/media/pci/cx88/cx88-video.c
index d83eb3b10f54..214cd68d7fd4 100644
--- a/drivers/media/pci/cx88/cx88-video.c
+++ b/drivers/media/pci/cx88/cx88-video.c
@@ -1307,8 +1307,7 @@ static int cx8800_initdev(struct pci_dev *pci_dev,
/* print pci info */
dev->pci_rev = pci_dev->revision;
pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat);
- printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, "
- "latency: %d, mmio: 0x%llx\n", core->name,
+ printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n", core->name,
pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0));
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 12/57] [media] ddbridge: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (10 preceding siblings ...)
2016-10-14 20:19 ` [PATCH 11/57] [media] cx88: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 13/57] [media] dm1105: " Mauro Carvalho Chehab
` (45 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Hans Verkuil,
Julia Lawall, Amitoj Kaur Chawla, Nicholas Mc Guire
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/pci/ddbridge/ddbridge-core.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/media/pci/ddbridge/ddbridge-core.c b/drivers/media/pci/ddbridge/ddbridge-core.c
index 18e3a4deee64..a6c9fe235974 100644
--- a/drivers/media/pci/ddbridge/ddbridge-core.c
+++ b/drivers/media/pci/ddbridge/ddbridge-core.c
@@ -824,8 +824,7 @@ static int dvb_input_attach(struct ddb_input *input)
&input->port->dev->pdev->dev,
adapter_nr);
if (ret < 0) {
- printk(KERN_ERR "ddbridge: Could not register adapter."
- "Check if you enabled enough adapters in dvb-core!\n");
+ printk(KERN_ERR "ddbridge: Could not register adapter.Check if you enabled enough adapters in dvb-core!\n");
return ret;
}
input->attached = 1;
@@ -1730,8 +1729,7 @@ static __init int module_init_ddbridge(void)
{
int ret;
- printk(KERN_INFO "Digital Devices PCIE bridge driver, "
- "Copyright (C) 2010-11 Digital Devices GmbH\n");
+ printk(KERN_INFO "Digital Devices PCIE bridge driver, Copyright (C) 2010-11 Digital Devices GmbH\n");
ret = ddb_class_create();
if (ret < 0)
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 13/57] [media] dm1105: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (11 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 12/57] [media] ddbridge: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 14/57] [media] ivtv: " Mauro Carvalho Chehab
` (44 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Lars-Peter Clausen
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/pci/dm1105/dm1105.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/media/pci/dm1105/dm1105.c b/drivers/media/pci/dm1105/dm1105.c
index 5dd504741b12..a589aa78d1d9 100644
--- a/drivers/media/pci/dm1105/dm1105.c
+++ b/drivers/media/pci/dm1105/dm1105.c
@@ -315,8 +315,7 @@ static void dm1105_card_list(struct pci_dev *pci)
"dm1105: Updating to the latest version might help\n"
"dm1105: as well.\n");
}
- printk(KERN_ERR "Here is a list of valid choices for the card=<n> "
- "insmod option:\n");
+ printk(KERN_ERR "Here is a list of valid choices for the card=<n> insmod option:\n");
for (i = 0; i < ARRAY_SIZE(dm1105_boards); i++)
printk(KERN_ERR "dm1105: card=%d -> %s\n",
i, dm1105_boards[i].name);
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 14/57] [media] ivtv: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (12 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 13/57] [media] dm1105: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 15/57] [media] meye: " Mauro Carvalho Chehab
` (43 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Andy Walls, Mauro Carvalho Chehab
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/pci/ivtv/ivtv-alsa-main.c | 9 +++------
drivers/media/pci/ivtv/ivtv-driver.c | 36 +++++++++++----------------------
drivers/media/pci/ivtv/ivtv-firmware.c | 3 +--
drivers/media/pci/ivtv/ivtv-yuv.c | 6 ++----
drivers/media/pci/ivtv/ivtvfb.c | 3 +--
5 files changed, 19 insertions(+), 38 deletions(-)
diff --git a/drivers/media/pci/ivtv/ivtv-alsa-main.c b/drivers/media/pci/ivtv/ivtv-alsa-main.c
index 8a86b61a896d..5bb28aa9a328 100644
--- a/drivers/media/pci/ivtv/ivtv-alsa-main.c
+++ b/drivers/media/pci/ivtv/ivtv-alsa-main.c
@@ -177,8 +177,7 @@ static int snd_ivtv_init(struct v4l2_device *v4l2_dev)
#if 0
ret = snd_ivtv_mixer_create(itvsc);
if (ret) {
- IVTV_ALSA_WARN("%s: snd_ivtv_mixer_create() failed with err %d:"
- " proceeding anyway\n", __func__, ret);
+ IVTV_ALSA_WARN("%s: snd_ivtv_mixer_create() failed with err %d: proceeding anyway\n", __func__, ret);
}
#endif
@@ -235,8 +234,7 @@ static int ivtv_alsa_load(struct ivtv *itv)
s = &itv->streams[IVTV_ENC_STREAM_TYPE_PCM];
if (s->vdev.v4l2_dev == NULL) {
- IVTV_DEBUG_ALSA_INFO("%s: PCM stream for card is disabled - "
- "skipping\n", __func__);
+ IVTV_DEBUG_ALSA_INFO("%s: PCM stream for card is disabled - skipping\n", __func__);
return 0;
}
@@ -250,8 +248,7 @@ static int ivtv_alsa_load(struct ivtv *itv)
IVTV_ALSA_ERR("%s: failed to create struct snd_ivtv_card\n",
__func__);
} else {
- IVTV_DEBUG_ALSA_INFO("%s: created ivtv ALSA interface instance "
- "\n", __func__);
+ IVTV_DEBUG_ALSA_INFO("%s: created ivtv ALSA interface instance \n", __func__);
}
return 0;
}
diff --git a/drivers/media/pci/ivtv/ivtv-driver.c b/drivers/media/pci/ivtv/ivtv-driver.c
index 374033a5bdaf..7f52b2ac6ada 100644
--- a/drivers/media/pci/ivtv/ivtv-driver.c
+++ b/drivers/media/pci/ivtv/ivtv-driver.c
@@ -885,8 +885,7 @@ static int ivtv_setup_pci(struct ivtv *itv, struct pci_dev *pdev,
pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency);
if (pci_latency < 64 && ivtv_pci_latency) {
- IVTV_INFO("Unreasonably low latency timer, "
- "setting to 64 (was %d)\n", pci_latency);
+ IVTV_INFO("Unreasonably low latency timer, setting to 64 (was %d)\n", pci_latency);
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency);
}
@@ -896,8 +895,7 @@ static int ivtv_setup_pci(struct ivtv *itv, struct pci_dev *pdev,
these problems. */
pci_write_config_dword(pdev, 0x40, 0xffff);
- IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, "
- "irq: %d, latency: %d, memory: 0x%llx\n",
+ IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, irq: %d, latency: %d, memory: 0x%llx\n",
pdev->device, pdev->revision, pdev->bus->number,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
pdev->irq, pci_latency, (u64)itv->base_addr);
@@ -1047,13 +1045,10 @@ static int ivtv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
itv->enc_mem = ioremap_nocache(itv->base_addr + IVTV_ENCODER_OFFSET,
IVTV_ENCODER_SIZE);
if (!itv->enc_mem) {
- IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 "
- "encoder memory\n");
- IVTV_ERR("Each capture card with a CX23415/6 needs 8 MB of "
- "vmalloc address space for this window\n");
+ IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 encoder memory\n");
+ IVTV_ERR("Each capture card with a CX23415/6 needs 8 MB of vmalloc address space for this window\n");
IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
- IVTV_ERR("Use the vmalloc= kernel command line option to set "
- "VmallocTotal to a larger value\n");
+ IVTV_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n");
retval = -ENOMEM;
goto free_mem;
}
@@ -1064,14 +1059,10 @@ static int ivtv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
itv->dec_mem = ioremap_nocache(itv->base_addr + IVTV_DECODER_OFFSET,
IVTV_DECODER_SIZE);
if (!itv->dec_mem) {
- IVTV_ERR("ioremap failed. Can't get a window into "
- "CX23415 decoder memory\n");
- IVTV_ERR("Each capture card with a CX23415 needs 8 MB "
- "of vmalloc address space for this window\n");
- IVTV_ERR("Check the output of 'grep Vmalloc "
- "/proc/meminfo'\n");
- IVTV_ERR("Use the vmalloc= kernel command line option "
- "to set VmallocTotal to a larger value\n");
+ IVTV_ERR("ioremap failed. Can't get a window into CX23415 decoder memory\n");
+ IVTV_ERR("Each capture card with a CX23415 needs 8 MB of vmalloc address space for this window\n");
+ IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
+ IVTV_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n");
retval = -ENOMEM;
goto free_mem;
}
@@ -1086,13 +1077,10 @@ static int ivtv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
itv->reg_mem =
ioremap_nocache(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
if (!itv->reg_mem) {
- IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 "
- "register space\n");
- IVTV_ERR("Each capture card with a CX23415/6 needs 64 kB of "
- "vmalloc address space for this window\n");
+ IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 register space\n");
+ IVTV_ERR("Each capture card with a CX23415/6 needs 64 kB of vmalloc address space for this window\n");
IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
- IVTV_ERR("Use the vmalloc= kernel command line option to set "
- "VmallocTotal to a larger value\n");
+ IVTV_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n");
retval = -ENOMEM;
goto free_io;
}
diff --git a/drivers/media/pci/ivtv/ivtv-firmware.c b/drivers/media/pci/ivtv/ivtv-firmware.c
index 5b3095f65dce..4288f763c90c 100644
--- a/drivers/media/pci/ivtv/ivtv-firmware.c
+++ b/drivers/media/pci/ivtv/ivtv-firmware.c
@@ -376,8 +376,7 @@ int ivtv_firmware_check(struct ivtv *itv, char *where)
/* If something failed & currently idle, try to reload */
if (res && !atomic_read(&itv->capturing) &&
!atomic_read(&itv->decoding)) {
- IVTV_INFO("Detected in %s that firmware had failed - "
- "Reloading\n", where);
+ IVTV_INFO("Detected in %s that firmware had failed - Reloading\n", where);
res = ivtv_firmware_restart(itv);
/*
* Even if restarted ok, still signal a problem had occurred.
diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c
index b094054cda6e..373bbb53f323 100644
--- a/drivers/media/pci/ivtv/ivtv-yuv.c
+++ b/drivers/media/pci/ivtv/ivtv-yuv.c
@@ -88,8 +88,7 @@ static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma,
if (y_pages == y_dma.page_count) {
IVTV_DEBUG_WARN
- ("failed to map uv user pages, returned %d "
- "expecting %d\n", uv_pages, uv_dma.page_count);
+ ("failed to map uv user pages, returned %d expecting %d\n", uv_pages, uv_dma.page_count);
if (uv_pages >= 0) {
for (i = 0; i < uv_pages; i++)
@@ -100,8 +99,7 @@ static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma,
}
} else {
IVTV_DEBUG_WARN
- ("failed to map y user pages, returned %d "
- "expecting %d\n", y_pages, y_dma.page_count);
+ ("failed to map y user pages, returned %d expecting %d\n", y_pages, y_dma.page_count);
}
if (y_pages >= 0) {
for (i = 0; i < y_pages; i++)
diff --git a/drivers/media/pci/ivtv/ivtvfb.c b/drivers/media/pci/ivtv/ivtvfb.c
index 8b95eefb610b..612a8402cf4d 100644
--- a/drivers/media/pci/ivtv/ivtvfb.c
+++ b/drivers/media/pci/ivtv/ivtvfb.c
@@ -293,8 +293,7 @@ static int ivtvfb_prep_dec_dma_to_device(struct ivtv *itv,
/* Map User DMA */
if (ivtv_udma_setup(itv, ivtv_dest_addr, userbuf, size_in_bytes) <= 0) {
mutex_unlock(&itv->udma.lock);
- IVTVFB_WARN("ivtvfb_prep_dec_dma_to_device, "
- "Error with get_user_pages: %d bytes, %d pages returned\n",
+ IVTVFB_WARN("ivtvfb_prep_dec_dma_to_device, Error with get_user_pages: %d bytes, %d pages returned\n",
size_in_bytes, itv->udma.page_count);
/* get_user_pages must have failed completely */
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 15/57] [media] meye: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (13 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 14/57] [media] ivtv: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 16/57] [media] pt1: " Mauro Carvalho Chehab
` (42 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/pci/meye/meye.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/media/pci/meye/meye.c b/drivers/media/pci/meye/meye.c
index ba887e8e1b17..11d81389ab1e 100644
--- a/drivers/media/pci/meye/meye.c
+++ b/drivers/media/pci/meye/meye.c
@@ -60,8 +60,7 @@ MODULE_PARM_DESC(gbuffers, "number of capture buffers, default is 2 (32 max)");
/* size of a grab buffer */
static unsigned int gbufsize = MEYE_MAX_BUFSIZE;
module_param(gbufsize, int, 0444);
-MODULE_PARM_DESC(gbufsize, "size of the capture buffers, default is 614400"
- " (will be rounded up to a page multiple)");
+MODULE_PARM_DESC(gbufsize, "size of the capture buffers, default is 614400 (will be rounded up to a page multiple)");
/* /dev/videoX registration number */
static int video_nr = -1;
@@ -1261,8 +1260,7 @@ static int vidioc_reqbufs(struct file *file, void *fh,
meye.grab_fbuffer = rvmalloc(gbuffers * gbufsize);
if (!meye.grab_fbuffer) {
- printk(KERN_ERR "meye: v4l framebuffer allocation"
- " failed\n");
+ printk(KERN_ERR "meye: v4l framebuffer allocation failed\n");
mutex_unlock(&meye.lock);
return -ENOMEM;
}
@@ -1659,8 +1657,7 @@ static int meye_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
ret = -EIO;
if ((ret = sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 1))) {
v4l2_err(v4l2_dev, "meye: unable to power on the camera\n");
- v4l2_err(v4l2_dev, "meye: did you enable the camera in "
- "sonypi using the module options ?\n");
+ v4l2_err(v4l2_dev, "meye: did you enable the camera in sonypi using the module options ?\n");
goto outsonypienable;
}
@@ -1834,8 +1831,7 @@ static int __init meye_init(void)
if (gbufsize > MEYE_MAX_BUFSIZE)
gbufsize = MEYE_MAX_BUFSIZE;
gbufsize = PAGE_ALIGN(gbufsize);
- printk(KERN_INFO "meye: using %d buffers with %dk (%dk total) "
- "for capture\n",
+ printk(KERN_INFO "meye: using %d buffers with %dk (%dk total) for capture\n",
gbuffers,
gbufsize / 1024, gbuffers * gbufsize / 1024);
return pci_register_driver(&meye_driver);
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 16/57] [media] pt1: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (14 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 15/57] [media] meye: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 17/57] [media] saa7134: " Mauro Carvalho Chehab
` (41 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/pci/pt1/pt1.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/media/pci/pt1/pt1.c b/drivers/media/pci/pt1/pt1.c
index e7e4428109c3..aad2acf90177 100644
--- a/drivers/media/pci/pt1/pt1.c
+++ b/drivers/media/pci/pt1/pt1.c
@@ -282,13 +282,11 @@ static int pt1_filter(struct pt1 *pt1, struct pt1_buffer_page *page)
continue;
if (upacket >> 24 & 1)
- printk_ratelimited(KERN_INFO "earth-pt1: device "
- "buffer overflowing. table[%d] buf[%d]\n",
+ printk_ratelimited(KERN_INFO "earth-pt1: device buffer overflowing. table[%d] buf[%d]\n",
pt1->table_index, pt1->buf_index);
sc = upacket >> 26 & 0x7;
if (adap->st_count != -1 && sc != ((adap->st_count + 1) & 0x7))
- printk_ratelimited(KERN_INFO "earth-pt1: data loss"
- " in streamID(adapter)[%d]\n", index);
+ printk_ratelimited(KERN_INFO "earth-pt1: data loss in streamID(adapter)[%d]\n", index);
adap->st_count = sc;
buf = adap->buf;
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 17/57] [media] saa7134: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (15 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 16/57] [media] pt1: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 18/57] [media] saa7164: " Mauro Carvalho Chehab
` (40 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Hans Verkuil,
Andrey Utkin, Julia Lawall, GEORGE, Andrew Morton, Geunyoung Kim,
Junghak Sung, Arnd Bergmann, Sean Young
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/pci/saa7134/saa7134-alsa.c | 3 +--
drivers/media/pci/saa7134/saa7134-cards.c | 6 ++----
drivers/media/pci/saa7134/saa7134-core.c | 29 +++++++++--------------------
drivers/media/pci/saa7134/saa7134-dvb.c | 24 ++++++++----------------
drivers/media/pci/saa7134/saa7134-input.c | 12 ++++--------
5 files changed, 24 insertions(+), 50 deletions(-)
diff --git a/drivers/media/pci/saa7134/saa7134-alsa.c b/drivers/media/pci/saa7134/saa7134-alsa.c
index dc0e2fc5f68b..8a35ecfb75e3 100644
--- a/drivers/media/pci/saa7134/saa7134-alsa.c
+++ b/drivers/media/pci/saa7134/saa7134-alsa.c
@@ -813,8 +813,7 @@ static int snd_card_saa7134_capture_open(struct snd_pcm_substream * substream)
int amux, err;
if (!saa7134) {
- pr_err("BUG: saa7134 can't find device struct."
- " Can't proceed with open\n");
+ pr_err("BUG: saa7134 can't find device struct. Can't proceed with open\n");
return -ENODEV;
}
dev = saa7134->dev;
diff --git a/drivers/media/pci/saa7134/saa7134-cards.c b/drivers/media/pci/saa7134/saa7134-cards.c
index c480a7e87593..803abe8e53f6 100644
--- a/drivers/media/pci/saa7134/saa7134-cards.c
+++ b/drivers/media/pci/saa7134/saa7134-cards.c
@@ -7341,8 +7341,7 @@ static void hauppauge_eeprom(struct saa7134_dev *dev, u8 *eeprom_data)
case 67659: /* WinTV-HVR1110 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
break;
default:
- pr_warn("%s: warning: "
- "unknown hauppauge model #%d\n", dev->name, tv.model);
+ pr_warn("%s: warning: unknown hauppauge model #%d\n", dev->name, tv.model);
break;
}
@@ -7920,8 +7919,7 @@ int saa7134_board_init2(struct saa7134_dev *dev)
msg.addr = 0x0b;
msg.len = 1;
if (1 != i2c_transfer(&dev->i2c_adap, &msg, 1)) {
- pr_warn("%s: send wake up byte to pic16C505"
- "(IR chip) failed\n", dev->name);
+ pr_warn("%s: send wake up byte to pic16C505(IR chip) failed\n", dev->name);
} else {
msg.flags = I2C_M_RD;
rc = i2c_transfer(&dev->i2c_adap, &msg, 1);
diff --git a/drivers/media/pci/saa7134/saa7134-core.c b/drivers/media/pci/saa7134/saa7134-core.c
index ffb66a9ae23e..757bc9acb148 100644
--- a/drivers/media/pci/saa7134/saa7134-core.c
+++ b/drivers/media/pci/saa7134/saa7134-core.c
@@ -66,8 +66,7 @@ MODULE_PARM_DESC(latency,"pci latency timer");
int saa7134_no_overlay=-1;
module_param_named(no_overlay, saa7134_no_overlay, int, 0444);
-MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
- " [some VIA/SIS chipsets are known to have problem with overlay]");
+MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables) [some VIA/SIS chipsets are known to have problem with overlay]");
bool saa7134_userptr;
module_param(saa7134_userptr, bool, 0644);
@@ -619,25 +618,21 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id)
print_irqstatus(dev,loop,report,status);
if (report & SAA7134_IRQ_REPORT_PE) {
/* disable all parity error */
- pr_warn("%s/irq: looping -- "
- "clearing PE (parity error!) enable bit\n",dev->name);
+ pr_warn("%s/irq: looping -- clearing PE (parity error!) enable bit\n",dev->name);
saa_clearl(SAA7134_IRQ2,SAA7134_IRQ2_INTE_PE);
} else if (report & SAA7134_IRQ_REPORT_GPIO16) {
/* disable gpio16 IRQ */
- pr_warn("%s/irq: looping -- "
- "clearing GPIO16 enable bit\n",dev->name);
+ pr_warn("%s/irq: looping -- clearing GPIO16 enable bit\n",dev->name);
saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO16_P);
saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO16_N);
} else if (report & SAA7134_IRQ_REPORT_GPIO18) {
/* disable gpio18 IRQs */
- pr_warn("%s/irq: looping -- "
- "clearing GPIO18 enable bit\n",dev->name);
+ pr_warn("%s/irq: looping -- clearing GPIO18 enable bit\n",dev->name);
saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P);
saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_N);
} else {
/* disable all irqs */
- pr_warn("%s/irq: looping -- "
- "clearing all enable bits\n",dev->name);
+ pr_warn("%s/irq: looping -- clearing all enable bits\n",dev->name);
saa_writel(SAA7134_IRQ1,0);
saa_writel(SAA7134_IRQ2,0);
}
@@ -1081,18 +1076,13 @@ static int saa7134_initdev(struct pci_dev *pci_dev,
}
#endif
if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) {
- pr_info("%s: quirk: this driver and your "
- "chipset may not work together"
- " in overlay mode.\n",dev->name);
+ pr_info("%s: quirk: this driver and your chipset may not work together in overlay mode.\n",dev->name);
if (!saa7134_no_overlay) {
- pr_info("%s: quirk: overlay "
- "mode will be disabled.\n",
+ pr_info("%s: quirk: overlay mode will be disabled.\n",
dev->name);
saa7134_no_overlay = 1;
} else {
- pr_info("%s: quirk: overlay "
- "mode will be forced. Use this"
- " option at your own risk.\n",
+ pr_info("%s: quirk: overlay mode will be forced. Use this option at your own risk.\n",
dev->name);
}
}
@@ -1106,8 +1096,7 @@ static int saa7134_initdev(struct pci_dev *pci_dev,
/* print pci info */
dev->pci_rev = pci_dev->revision;
pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat);
- pr_info("%s: found at %s, rev: %d, irq: %d, "
- "latency: %d, mmio: 0x%llx\n", dev->name,
+ pr_info("%s: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n", dev->name,
pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0));
pci_set_master(pci_dev);
diff --git a/drivers/media/pci/saa7134/saa7134-dvb.c b/drivers/media/pci/saa7134/saa7134-dvb.c
index 59a4b5f7724e..4d1338734d77 100644
--- a/drivers/media/pci/saa7134/saa7134-dvb.c
+++ b/drivers/media/pci/saa7134/saa7134-dvb.c
@@ -1449,8 +1449,7 @@ static int dvb_init(struct saa7134_dev *dev)
if (dvb_attach(tda826x_attach, fe0->dvb.frontend,
0x60, &dev->i2c_adap, 0) == NULL) {
- pr_warn("%s: Medion Quadro, no tda826x "
- "found !\n", __func__);
+ pr_warn("%s: Medion Quadro, no tda826x found !\n", __func__);
goto detach_frontend;
}
if (dev_id != 0x08) {
@@ -1458,8 +1457,7 @@ static int dvb_init(struct saa7134_dev *dev)
fe->ops.i2c_gate_ctrl(fe, 1);
if (dvb_attach(isl6405_attach, fe,
&dev->i2c_adap, 0x08, 0, 0) == NULL) {
- pr_warn("%s: Medion Quadro, no ISL6405 "
- "found !\n", __func__);
+ pr_warn("%s: Medion Quadro, no ISL6405 found !\n", __func__);
goto detach_frontend;
}
if (dev_id == 0x07) {
@@ -1629,8 +1627,7 @@ static int dvb_init(struct saa7134_dev *dev)
struct dvb_frontend *fe;
if (dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60,
&dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) {
- pr_warn("%s: MD7134 DVB-S, no SD1878 "
- "found !\n", __func__);
+ pr_warn("%s: MD7134 DVB-S, no SD1878 found !\n", __func__);
goto detach_frontend;
}
/* we need to open the i2c gate (we know it exists) */
@@ -1638,8 +1635,7 @@ static int dvb_init(struct saa7134_dev *dev)
fe->ops.i2c_gate_ctrl(fe, 1);
if (dvb_attach(isl6405_attach, fe,
&dev->i2c_adap, 0x08, 0, 0) == NULL) {
- pr_warn("%s: MD7134 DVB-S, no ISL6405 "
- "found !\n", __func__);
+ pr_warn("%s: MD7134 DVB-S, no ISL6405 found !\n", __func__);
goto detach_frontend;
}
fe->ops.i2c_gate_ctrl(fe, 0);
@@ -1670,14 +1666,12 @@ static int dvb_init(struct saa7134_dev *dev)
if (dvb_attach(tda826x_attach,
fe0->dvb.frontend, 0x60,
&dev->i2c_adap, 0) == NULL) {
- pr_warn("%s: Asus Tiger 3in1, no "
- "tda826x found!\n", __func__);
+ pr_warn("%s: Asus Tiger 3in1, no tda826x found!\n", __func__);
goto detach_frontend;
}
if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
&dev->i2c_adap, 0, 0) == NULL) {
- pr_warn("%s: Asus Tiger 3in1, no lnbp21"
- " found!\n", __func__);
+ pr_warn("%s: Asus Tiger 3in1, no lnbp21 found!\n", __func__);
goto detach_frontend;
}
}
@@ -1695,14 +1689,12 @@ static int dvb_init(struct saa7134_dev *dev)
if (dvb_attach(tda826x_attach,
fe0->dvb.frontend, 0x60,
&dev->i2c_adap, 0) == NULL) {
- pr_warn("%s: Asus My Cinema PS3-100, no "
- "tda826x found!\n", __func__);
+ pr_warn("%s: Asus My Cinema PS3-100, no tda826x found!\n", __func__);
goto detach_frontend;
}
if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
&dev->i2c_adap, 0, 0) == NULL) {
- pr_warn("%s: Asus My Cinema PS3-100, no lnbp21"
- " found!\n", __func__);
+ pr_warn("%s: Asus My Cinema PS3-100, no lnbp21 found!\n", __func__);
goto detach_frontend;
}
}
diff --git a/drivers/media/pci/saa7134/saa7134-input.c b/drivers/media/pci/saa7134/saa7134-input.c
index eff52bbbfd66..f7ad783f5bfa 100644
--- a/drivers/media/pci/saa7134/saa7134-input.c
+++ b/drivers/media/pci/saa7134/saa7134-input.c
@@ -123,8 +123,7 @@ static int get_key_flydvb_trio(struct IR_i2c *ir, enum rc_type *protocol,
struct saa7134_dev *dev = ir->c->adapter->algo_data;
if (dev == NULL) {
- ir_dbg(ir, "get_key_flydvb_trio: "
- "ir->c->adapter->algo_data is NULL!\n");
+ ir_dbg(ir, "get_key_flydvb_trio: ir->c->adapter->algo_data is NULL!\n");
return -EIO;
}
@@ -150,8 +149,7 @@ static int get_key_flydvb_trio(struct IR_i2c *ir, enum rc_type *protocol,
msleep(10);
continue;
}
- ir_dbg(ir, "send wake up byte to pic16C505 (IR chip)"
- "failed %dx\n", attempt);
+ ir_dbg(ir, "send wake up byte to pic16C505 (IR chip)failed %dx\n", attempt);
return -EIO;
}
if (1 != i2c_master_recv(ir->c, &b, 1)) {
@@ -174,8 +172,7 @@ static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, enum rc_type *protocol
/* <dev> is needed to access GPIO. Used by the saa_readl macro. */
struct saa7134_dev *dev = ir->c->adapter->algo_data;
if (dev == NULL) {
- ir_dbg(ir, "get_key_msi_tvanywhere_plus: "
- "ir->c->adapter->algo_data is NULL!\n");
+ ir_dbg(ir, "get_key_msi_tvanywhere_plus: ir->c->adapter->algo_data is NULL!\n");
return -EIO;
}
@@ -223,8 +220,7 @@ static int get_key_kworld_pc150u(struct IR_i2c *ir, enum rc_type *protocol,
/* <dev> is needed to access GPIO. Used by the saa_readl macro. */
struct saa7134_dev *dev = ir->c->adapter->algo_data;
if (dev == NULL) {
- ir_dbg(ir, "get_key_kworld_pc150u: "
- "ir->c->adapter->algo_data is NULL!\n");
+ ir_dbg(ir, "get_key_kworld_pc150u: ir->c->adapter->algo_data is NULL!\n");
return -EIO;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 18/57] [media] saa7164: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (16 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 17/57] [media] saa7134: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 19/57] [media] solo6x10: " Mauro Carvalho Chehab
` (39 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Andrew Morton,
Hans Verkuil, Amitoj Kaur Chawla
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/pci/saa7164/saa7164-buffer.c | 3 +-
drivers/media/pci/saa7164/saa7164-bus.c | 3 +-
drivers/media/pci/saa7164/saa7164-cards.c | 3 +-
drivers/media/pci/saa7164/saa7164-cmd.c | 10 ++----
drivers/media/pci/saa7164/saa7164-core.c | 56 ++++++++++-------------------
drivers/media/pci/saa7164/saa7164-dvb.c | 27 +++++---------
drivers/media/pci/saa7164/saa7164-encoder.c | 15 +++-----
drivers/media/pci/saa7164/saa7164-fw.c | 9 ++---
drivers/media/pci/saa7164/saa7164-vbi.c | 12 +++----
9 files changed, 45 insertions(+), 93 deletions(-)
diff --git a/drivers/media/pci/saa7164/saa7164-buffer.c b/drivers/media/pci/saa7164/saa7164-buffer.c
index f30758e24f5d..ff04ef322fc1 100644
--- a/drivers/media/pci/saa7164/saa7164-buffer.c
+++ b/drivers/media/pci/saa7164/saa7164-buffer.c
@@ -218,8 +218,7 @@ int saa7164_buffer_activate(struct saa7164_buffer *buf, int i)
saa7164_writel(port->bufptr32h + ((sizeof(u32) * 2) * i), buf->pt_dma);
saa7164_writel(port->bufptr32l + ((sizeof(u32) * 2) * i), 0);
- dprintk(DBGLVL_BUF, " buf[%d] offset 0x%llx (0x%x) "
- "buf 0x%llx/%llx (0x%x/%x) nr=%d\n",
+ dprintk(DBGLVL_BUF, " buf[%d] offset 0x%llx (0x%x) buf 0x%llx/%llx (0x%x/%x) nr=%d\n",
buf->idx,
(u64)port->bufoffset + (i * sizeof(u32)),
saa7164_readl(port->bufoffset + (sizeof(u32) * i)),
diff --git a/drivers/media/pci/saa7164/saa7164-bus.c b/drivers/media/pci/saa7164/saa7164-bus.c
index a18fe5d47238..00c2aae059a0 100644
--- a/drivers/media/pci/saa7164/saa7164-bus.c
+++ b/drivers/media/pci/saa7164/saa7164-bus.c
@@ -427,8 +427,7 @@ int saa7164_bus_get(struct saa7164_dev *dev, struct tmComResInfo* msg,
write_distance = curr_gwp + bus->m_dwSizeGetRing - curr_grp;
if (bytes_to_read > write_distance) {
- printk(KERN_ERR "%s() Invalid bus state, missing msg "
- "or mangled ring, faulty H/W / bad code?\n", __func__);
+ printk(KERN_ERR "%s() Invalid bus state, missing msg or mangled ring, faulty H/W / bad code?\n", __func__);
ret = SAA_ERR_INVALID_COMMAND;
goto out;
}
diff --git a/drivers/media/pci/saa7164/saa7164-cards.c b/drivers/media/pci/saa7164/saa7164-cards.c
index c2b738227f58..bfe0af2c00f4 100644
--- a/drivers/media/pci/saa7164/saa7164-cards.c
+++ b/drivers/media/pci/saa7164/saa7164-cards.c
@@ -726,8 +726,7 @@ void saa7164_card_list(struct saa7164_dev *dev)
dev->name, dev->name, dev->name, dev->name);
}
- printk(KERN_ERR "%s: Here are valid choices for the card=<n> insmod "
- "option:\n", dev->name);
+ printk(KERN_ERR "%s: Here are valid choices for the card=<n> insmod option:\n", dev->name);
for (i = 0; i < saa7164_bcount; i++)
printk(KERN_ERR "%s: card=%d -> %s\n",
diff --git a/drivers/media/pci/saa7164/saa7164-cmd.c b/drivers/media/pci/saa7164/saa7164-cmd.c
index 3285c37b4583..1a6fc8e589b6 100644
--- a/drivers/media/pci/saa7164/saa7164-cmd.c
+++ b/drivers/media/pci/saa7164/saa7164-cmd.c
@@ -301,8 +301,7 @@ static int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno)
else
saa7164_cmd_timeout_seqno(dev, seqno);
- dprintk(DBGLVL_CMD, "%s(seqno=%d) Waiting res = %d "
- "(signalled=%d)\n", __func__, seqno, r,
+ dprintk(DBGLVL_CMD, "%s(seqno=%d) Waiting res = %d (signalled=%d)\n", __func__, seqno, r,
dev->cmds[seqno].signalled);
} else
ret = SAA_OK;
@@ -353,8 +352,7 @@ int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, enum tmComResCmd command,
int ret;
int safety = 0;
- dprintk(DBGLVL_CMD, "%s(unitid = %s (%d) , command = 0x%x, "
- "sel = 0x%x)\n", __func__, saa7164_unitid_name(dev, id), id,
+ dprintk(DBGLVL_CMD, "%s(unitid = %s (%d) , command = 0x%x, sel = 0x%x)\n", __func__, saa7164_unitid_name(dev, id), id,
command, controlselector);
if ((size == 0) || (buf == NULL)) {
@@ -452,9 +450,7 @@ int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, enum tmComResCmd command,
if (presponse_t->seqno != pcommand_t->seqno) {
dprintk(DBGLVL_CMD,
- "wrong event: seqno = %d, "
- "expected seqno = %d, "
- "will dequeue regardless\n",
+ "wrong event: seqno = %d, expected seqno = %d, will dequeue regardless\n",
presponse_t->seqno, pcommand_t->seqno);
ret = saa7164_cmd_dequeue(dev);
diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c
index 8bbd092fbe1d..ba07b033e289 100644
--- a/drivers/media/pci/saa7164/saa7164-core.c
+++ b/drivers/media/pci/saa7164/saa7164-core.c
@@ -710,9 +710,7 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
} else {
/* Find the function */
dprintk(DBGLVL_IRQ,
- "%s() unhandled interrupt "
- "reg 0x%x bit 0x%x "
- "intid = 0x%x\n",
+ "%s() unhandled interrupt reg 0x%x bit 0x%x intid = 0x%x\n",
__func__, i, bit, intid);
}
}
@@ -767,13 +765,10 @@ void saa7164_dumpregs(struct saa7164_dev *dev, u32 addr)
{
int i;
- dprintk(1, "--------------------> "
- "00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n");
+ dprintk(1, "--------------------> 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n");
for (i = 0; i < 0x100; i += 16)
- dprintk(1, "region0[0x%08x] = "
- "%02x %02x %02x %02x %02x %02x %02x %02x"
- " %02x %02x %02x %02x %02x %02x %02x %02x\n", i,
+ dprintk(1, "region0[0x%08x] = %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", i,
(u8)saa7164_readb(addr + i + 0),
(u8)saa7164_readb(addr + i + 1),
(u8)saa7164_readb(addr + i + 2),
@@ -825,8 +820,7 @@ static void saa7164_dump_hwdesc(struct saa7164_dev *dev)
static void saa7164_dump_intfdesc(struct saa7164_dev *dev)
{
- dprintk(1, "@0x%p intfdesc "
- "sizeof(struct tmComResInterfaceDescr) = %d bytes\n",
+ dprintk(1, "@0x%p intfdesc sizeof(struct tmComResInterfaceDescr) = %d bytes\n",
&dev->intfdesc, (u32)sizeof(struct tmComResInterfaceDescr));
dprintk(1, " .bLength = 0x%x\n", dev->intfdesc.bLength);
@@ -1011,8 +1005,7 @@ static int saa7164_dev_setup(struct saa7164_dev *dev)
saa7164_port_init(dev, SAA7164_PORT_VBI2);
if (get_resources(dev) < 0) {
- printk(KERN_ERR "CORE %s No more PCIe resources for "
- "subsystem: %04x:%04x\n",
+ printk(KERN_ERR "CORE %s No more PCIe resources for subsystem: %04x:%04x\n",
dev->name, dev->pci->subsystem_vendor,
dev->pci->subsystem_device);
@@ -1204,8 +1197,7 @@ static bool saa7164_enable_msi(struct pci_dev *pci_dev, struct saa7164_dev *dev)
err = pci_enable_msi(pci_dev);
if (err) {
- printk(KERN_ERR "%s() Failed to enable MSI interrupt."
- " Falling back to a shared IRQ\n", __func__);
+ printk(KERN_ERR "%s() Failed to enable MSI interrupt. Falling back to a shared IRQ\n", __func__);
return false;
}
@@ -1215,8 +1207,7 @@ static bool saa7164_enable_msi(struct pci_dev *pci_dev, struct saa7164_dev *dev)
if (err) {
/* fall back to legacy interrupt */
- printk(KERN_ERR "%s() Failed to get an MSI interrupt."
- " Falling back to a shared IRQ\n", __func__);
+ printk(KERN_ERR "%s() Failed to get an MSI interrupt. Falling back to a shared IRQ\n", __func__);
pci_disable_msi(pci_dev);
return false;
}
@@ -1256,8 +1247,7 @@ static int saa7164_initdev(struct pci_dev *pci_dev,
/* print pci info */
dev->pci_rev = pci_dev->revision;
pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat);
- printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, "
- "latency: %d, mmio: 0x%llx\n", dev->name,
+ printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n", dev->name,
pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
dev->pci_lat,
(unsigned long long)pci_resource_start(pci_dev, 0));
@@ -1307,8 +1297,7 @@ static int saa7164_initdev(struct pci_dev *pci_dev,
err = saa7164_downloadfirmware(dev);
if (err < 0) {
printk(KERN_ERR
- "Failed to boot firmware, no features "
- "registered\n");
+ "Failed to boot firmware, no features registered\n");
goto fail_fw;
}
@@ -1327,8 +1316,7 @@ static int saa7164_initdev(struct pci_dev *pci_dev,
*/
version = 0;
if (saa7164_api_get_fw_version(dev, &version) == SAA_OK)
- dprintk(1, "Bus is operating correctly using "
- "version %d.%d.%d.%d (0x%x)\n",
+ dprintk(1, "Bus is operating correctly using version %d.%d.%d.%d (0x%x)\n",
(version & 0x0000fc00) >> 10,
(version & 0x000003e0) >> 5,
(version & 0x0000001f),
@@ -1356,45 +1344,39 @@ static int saa7164_initdev(struct pci_dev *pci_dev,
/* Begin to create the video sub-systems and register funcs */
if (saa7164_boards[dev->board].porta == SAA7164_MPEG_DVB) {
if (saa7164_dvb_register(&dev->ports[SAA7164_PORT_TS1]) < 0) {
- printk(KERN_ERR "%s() Failed to register "
- "dvb adapters on porta\n",
+ printk(KERN_ERR "%s() Failed to register dvb adapters on porta\n",
__func__);
}
}
if (saa7164_boards[dev->board].portb == SAA7164_MPEG_DVB) {
if (saa7164_dvb_register(&dev->ports[SAA7164_PORT_TS2]) < 0) {
- printk(KERN_ERR"%s() Failed to register "
- "dvb adapters on portb\n",
+ printk(KERN_ERR"%s() Failed to register dvb adapters on portb\n",
__func__);
}
}
if (saa7164_boards[dev->board].portc == SAA7164_MPEG_ENCODER) {
if (saa7164_encoder_register(&dev->ports[SAA7164_PORT_ENC1]) < 0) {
- printk(KERN_ERR"%s() Failed to register "
- "mpeg encoder\n", __func__);
+ printk(KERN_ERR"%s() Failed to register mpeg encoder\n", __func__);
}
}
if (saa7164_boards[dev->board].portd == SAA7164_MPEG_ENCODER) {
if (saa7164_encoder_register(&dev->ports[SAA7164_PORT_ENC2]) < 0) {
- printk(KERN_ERR"%s() Failed to register "
- "mpeg encoder\n", __func__);
+ printk(KERN_ERR"%s() Failed to register mpeg encoder\n", __func__);
}
}
if (saa7164_boards[dev->board].porte == SAA7164_MPEG_VBI) {
if (saa7164_vbi_register(&dev->ports[SAA7164_PORT_VBI1]) < 0) {
- printk(KERN_ERR"%s() Failed to register "
- "vbi device\n", __func__);
+ printk(KERN_ERR"%s() Failed to register vbi device\n", __func__);
}
}
if (saa7164_boards[dev->board].portf == SAA7164_MPEG_VBI) {
if (saa7164_vbi_register(&dev->ports[SAA7164_PORT_VBI2]) < 0) {
- printk(KERN_ERR"%s() Failed to register "
- "vbi device\n", __func__);
+ printk(KERN_ERR"%s() Failed to register vbi device\n", __func__);
}
}
saa7164_api_set_debug(dev, fw_debug);
@@ -1404,15 +1386,13 @@ static int saa7164_initdev(struct pci_dev *pci_dev,
"saa7164 debug");
if (IS_ERR(dev->kthread)) {
dev->kthread = NULL;
- printk(KERN_ERR "%s() Failed to create "
- "debug kernel thread\n", __func__);
+ printk(KERN_ERR "%s() Failed to create debug kernel thread\n", __func__);
}
}
} /* != BOARD_UNKNOWN */
else
- printk(KERN_ERR "%s() Unsupported board detected, "
- "registering without firmware\n", __func__);
+ printk(KERN_ERR "%s() Unsupported board detected, registering without firmware\n", __func__);
dprintk(1, "%s() parameter debug = %d\n", __func__, saa_debug);
dprintk(1, "%s() parameter waitsecs = %d\n", __func__, waitsecs);
diff --git a/drivers/media/pci/saa7164/saa7164-dvb.c b/drivers/media/pci/saa7164/saa7164-dvb.c
index e9a783b71b45..6c21399c948e 100644
--- a/drivers/media/pci/saa7164/saa7164-dvb.c
+++ b/drivers/media/pci/saa7164/saa7164-dvb.c
@@ -244,8 +244,7 @@ static int saa7164_dvb_start_port(struct saa7164_port *port)
/* Stop the hardware, regardless */
result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
- printk(KERN_ERR "%s() acquire/forced stop transition "
- "failed, res = 0x%x\n", __func__, result);
+ printk(KERN_ERR "%s() acquire/forced stop transition failed, res = 0x%x\n", __func__, result);
}
ret = -EIO;
goto out;
@@ -261,8 +260,7 @@ static int saa7164_dvb_start_port(struct saa7164_port *port)
/* Stop the hardware, regardless */
result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
- printk(KERN_ERR "%s() pause/forced stop transition "
- "failed, res = 0x%x\n", __func__, result);
+ printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n", __func__, result);
}
ret = -EIO;
@@ -279,8 +277,7 @@ static int saa7164_dvb_start_port(struct saa7164_port *port)
/* Stop the hardware, regardless */
result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
- printk(KERN_ERR "%s() run/forced stop transition "
- "failed, res = 0x%x\n", __func__, result);
+ printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n", __func__, result);
}
ret = -EIO;
@@ -357,8 +354,7 @@ static int dvb_register(struct saa7164_port *port)
/* Sanity check that the PCI configuration space is active */
if (port->hwcfg.BARLocation == 0) {
result = -ENOMEM;
- printk(KERN_ERR "%s: dvb_register_adapter failed "
- "(errno = %d), NO PCI configuration\n",
+ printk(KERN_ERR "%s: dvb_register_adapter failed (errno = %d), NO PCI configuration\n",
DRIVER_NAME, result);
goto fail_adapter;
}
@@ -386,8 +382,7 @@ static int dvb_register(struct saa7164_port *port)
if (!buf) {
result = -ENOMEM;
- printk(KERN_ERR "%s: dvb_register_adapter failed "
- "(errno = %d), unable to allocate buffers\n",
+ printk(KERN_ERR "%s: dvb_register_adapter failed (errno = %d), unable to allocate buffers\n",
DRIVER_NAME, result);
goto fail_adapter;
}
@@ -401,8 +396,7 @@ static int dvb_register(struct saa7164_port *port)
result = dvb_register_adapter(&dvb->adapter, DRIVER_NAME, THIS_MODULE,
&dev->pci->dev, adapter_nr);
if (result < 0) {
- printk(KERN_ERR "%s: dvb_register_adapter failed "
- "(errno = %d)\n", DRIVER_NAME, result);
+ printk(KERN_ERR "%s: dvb_register_adapter failed (errno = %d)\n", DRIVER_NAME, result);
goto fail_adapter;
}
dvb->adapter.priv = port;
@@ -410,8 +404,7 @@ static int dvb_register(struct saa7164_port *port)
/* register frontend */
result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
if (result < 0) {
- printk(KERN_ERR "%s: dvb_register_frontend failed "
- "(errno = %d)\n", DRIVER_NAME, result);
+ printk(KERN_ERR "%s: dvb_register_frontend failed (errno = %d)\n", DRIVER_NAME, result);
goto fail_frontend;
}
@@ -444,16 +437,14 @@ static int dvb_register(struct saa7164_port *port)
dvb->fe_hw.source = DMX_FRONTEND_0;
result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
if (result < 0) {
- printk(KERN_ERR "%s: add_frontend failed "
- "(DMX_FRONTEND_0, errno = %d)\n", DRIVER_NAME, result);
+ printk(KERN_ERR "%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n", DRIVER_NAME, result);
goto fail_fe_hw;
}
dvb->fe_mem.source = DMX_MEMORY_FE;
result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
if (result < 0) {
- printk(KERN_ERR "%s: add_frontend failed "
- "(DMX_MEMORY_FE, errno = %d)\n", DRIVER_NAME, result);
+ printk(KERN_ERR "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n", DRIVER_NAME, result);
goto fail_fe_mem;
}
diff --git a/drivers/media/pci/saa7164/saa7164-encoder.c b/drivers/media/pci/saa7164/saa7164-encoder.c
index 32a353d162e7..3aa4f50556e9 100644
--- a/drivers/media/pci/saa7164/saa7164-encoder.c
+++ b/drivers/media/pci/saa7164/saa7164-encoder.c
@@ -157,8 +157,7 @@ static int saa7164_encoder_buffers_alloc(struct saa7164_port *port)
params->pitch);
if (!buf) {
- printk(KERN_ERR "%s() failed "
- "(errno = %d), unable to allocate buffer\n",
+ printk(KERN_ERR "%s() failed (errno = %d), unable to allocate buffer\n",
__func__, result);
result = -ENOMEM;
goto failed;
@@ -681,8 +680,7 @@ static int saa7164_encoder_start_streaming(struct saa7164_port *port)
/* Stop the hardware, regardless */
result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
- printk(KERN_ERR "%s() acquire/forced stop transition "
- "failed, res = 0x%x\n", __func__, result);
+ printk(KERN_ERR "%s() acquire/forced stop transition failed, res = 0x%x\n", __func__, result);
}
ret = -EIO;
goto out;
@@ -698,8 +696,7 @@ static int saa7164_encoder_start_streaming(struct saa7164_port *port)
/* Stop the hardware, regardless */
result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
- printk(KERN_ERR "%s() pause/forced stop transition "
- "failed, res = 0x%x\n", __func__, result);
+ printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n", __func__, result);
}
ret = -EIO;
@@ -716,8 +713,7 @@ static int saa7164_encoder_start_streaming(struct saa7164_port *port)
/* Stop the hardware, regardless */
result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
- printk(KERN_ERR "%s() run/forced stop transition "
- "failed, res = 0x%x\n", __func__, result);
+ printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n", __func__, result);
}
ret = -EIO;
@@ -1026,8 +1022,7 @@ int saa7164_encoder_register(struct saa7164_port *port)
/* Sanity check that the PCI configuration space is active */
if (port->hwcfg.BARLocation == 0) {
- printk(KERN_ERR "%s() failed "
- "(errno = %d), NO PCI configuration\n",
+ printk(KERN_ERR "%s() failed (errno = %d), NO PCI configuration\n",
__func__, result);
result = -ENOMEM;
goto failed;
diff --git a/drivers/media/pci/saa7164/saa7164-fw.c b/drivers/media/pci/saa7164/saa7164-fw.c
index 269e0782c7b6..60e141bf863b 100644
--- a/drivers/media/pci/saa7164/saa7164-fw.c
+++ b/drivers/media/pci/saa7164/saa7164-fw.c
@@ -421,8 +421,7 @@ int saa7164_downloadfirmware(struct saa7164_dev *dev)
ret = request_firmware(&fw, fwname, &dev->pci->dev);
if (ret) {
- printk(KERN_ERR "%s() Upload failed. "
- "(file not found?)\n", __func__);
+ printk(KERN_ERR "%s() Upload failed. (file not found?)\n", __func__);
return -ENOMEM;
}
@@ -478,15 +477,13 @@ int saa7164_downloadfirmware(struct saa7164_dev *dev)
0x03) && (saa7164_readl(SAA_DATAREADY_FLAG_ACK)
== 0x00) && (version == 0x00)) {
- dprintk(DBGLVL_FW, "BootLoader version in "
- "rom %d.%d.%d.%d\n",
+ dprintk(DBGLVL_FW, "BootLoader version in rom %d.%d.%d.%d\n",
(bootloaderversion & 0x0000fc00) >> 10,
(bootloaderversion & 0x000003e0) >> 5,
(bootloaderversion & 0x0000001f),
(bootloaderversion & 0xffff0000) >> 16
);
- dprintk(DBGLVL_FW, "BootLoader version "
- "in file %d.%d.%d.%d\n",
+ dprintk(DBGLVL_FW, "BootLoader version in file %d.%d.%d.%d\n",
(boothdr->version & 0x0000fc00) >> 10,
(boothdr->version & 0x000003e0) >> 5,
(boothdr->version & 0x0000001f),
diff --git a/drivers/media/pci/saa7164/saa7164-vbi.c b/drivers/media/pci/saa7164/saa7164-vbi.c
index ee54491459a6..2a04c685d307 100644
--- a/drivers/media/pci/saa7164/saa7164-vbi.c
+++ b/drivers/media/pci/saa7164/saa7164-vbi.c
@@ -110,8 +110,7 @@ static int saa7164_vbi_buffers_alloc(struct saa7164_port *port)
params->pitch);
if (!buf) {
- printk(KERN_ERR "%s() failed "
- "(errno = %d), unable to allocate buffer\n",
+ printk(KERN_ERR "%s() failed (errno = %d), unable to allocate buffer\n",
__func__, result);
result = -ENOMEM;
goto failed;
@@ -384,8 +383,7 @@ static int saa7164_vbi_start_streaming(struct saa7164_port *port)
/* Stop the hardware, regardless */
result = saa7164_vbi_stop_port(port);
if (result != SAA_OK) {
- printk(KERN_ERR "%s() pause/forced stop transition "
- "failed, res = 0x%x\n", __func__, result);
+ printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n", __func__, result);
}
ret = -EIO;
@@ -403,8 +401,7 @@ static int saa7164_vbi_start_streaming(struct saa7164_port *port)
result = saa7164_vbi_acquire_port(port);
result = saa7164_vbi_stop_port(port);
if (result != SAA_OK) {
- printk(KERN_ERR "%s() run/forced stop transition "
- "failed, res = 0x%x\n", __func__, result);
+ printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n", __func__, result);
}
ret = -EIO;
@@ -728,8 +725,7 @@ int saa7164_vbi_register(struct saa7164_port *port)
/* Sanity check that the PCI configuration space is active */
if (port->hwcfg.BARLocation == 0) {
- printk(KERN_ERR "%s() failed "
- "(errno = %d), NO PCI configuration\n",
+ printk(KERN_ERR "%s() failed (errno = %d), NO PCI configuration\n",
__func__, result);
result = -ENOMEM;
goto failed;
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 19/57] [media] solo6x10: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (17 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 18/57] [media] saa7164: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 20/57] [media] ttpci: " Mauro Carvalho Chehab
` (38 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Bluecherry Maintainers, Andrey Utkin,
Ismael Luceno, Mauro Carvalho Chehab
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/pci/solo6x10/solo6x10-v4l2.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/media/pci/solo6x10/solo6x10-v4l2.c b/drivers/media/pci/solo6x10/solo6x10-v4l2.c
index b4be47969b6b..12f38e5f2ece 100644
--- a/drivers/media/pci/solo6x10/solo6x10-v4l2.c
+++ b/drivers/media/pci/solo6x10/solo6x10-v4l2.c
@@ -702,8 +702,7 @@ int solo_v4l2_init(struct solo_dev *solo_dev, unsigned nr)
snprintf(solo_dev->vfd->name, sizeof(solo_dev->vfd->name), "%s (%i)",
SOLO6X10_NAME, solo_dev->vfd->num);
- dev_info(&solo_dev->pdev->dev, "Display as /dev/video%d with "
- "%d inputs (%d extended)\n", solo_dev->vfd->num,
+ dev_info(&solo_dev->pdev->dev, "Display as /dev/video%d with %d inputs (%d extended)\n", solo_dev->vfd->num,
solo_dev->nr_chans, solo_dev->nr_ext);
return 0;
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 20/57] [media] ttpci: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (18 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 19/57] [media] solo6x10: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 21/57] [media] tw68: " Mauro Carvalho Chehab
` (37 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Hans Verkuil,
Julia Lawall, Arnd Bergmann
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/pci/ttpci/av7110.c | 27 +++++++++------------------
drivers/media/pci/ttpci/av7110_hw.c | 12 ++++--------
drivers/media/pci/ttpci/budget-av.c | 3 +--
drivers/media/pci/ttpci/budget-ci.c | 4 +---
drivers/media/pci/ttpci/budget-patch.c | 3 +--
drivers/media/pci/ttpci/budget.c | 3 +--
drivers/media/pci/ttpci/ttpci-eeprom.c | 3 +--
7 files changed, 18 insertions(+), 37 deletions(-)
diff --git a/drivers/media/pci/ttpci/av7110.c b/drivers/media/pci/ttpci/av7110.c
index 382caf200ba1..155a46001631 100644
--- a/drivers/media/pci/ttpci/av7110.c
+++ b/drivers/media/pci/ttpci/av7110.c
@@ -100,8 +100,7 @@ MODULE_PARM_DESC(adac,"audio DAC type: 0 TI, 1 CRYSTAL, 2 MSP (use if autodetect
module_param(hw_sections, int, 0444);
MODULE_PARM_DESC(hw_sections, "0 use software section filter, 1 use hardware");
module_param(rgb_on, int, 0444);
-MODULE_PARM_DESC(rgb_on, "For Siemens DVB-C cards only: Enable RGB control"
- " signal on SCART pin 16 to switch SCART video mode from CVBS to RGB");
+MODULE_PARM_DESC(rgb_on, "For Siemens DVB-C cards only: Enable RGB control signal on SCART pin 16 to switch SCART video mode from CVBS to RGB");
module_param(volume, int, 0444);
MODULE_PARM_DESC(volume, "initial volume: default 255 (range 0-255)");
module_param(budgetpatch, int, 0444);
@@ -833,8 +832,7 @@ static int StartHWFilter(struct dvb_demux_filter *dvbdmxfilter)
ret = av7110_fw_request(av7110, buf, 20, &handle, 1);
if (ret != 0 || handle >= 32) {
- printk("dvb-ttpci: %s error buf %04x %04x %04x %04x "
- "ret %d handle %04x\n",
+ printk("dvb-ttpci: %s error buf %04x %04x %04x %04x ret %d handle %04x\n",
__func__, buf[0], buf[1], buf[2], buf[3],
ret, handle);
dvbdmxfilter->hw_handle = 0xffff;
@@ -876,8 +874,7 @@ static int StopHWFilter(struct dvb_demux_filter *dvbdmxfilter)
buf[2] = handle;
ret = av7110_fw_request(av7110, buf, 3, answ, 2);
if (ret != 0 || answ[1] != handle) {
- printk("dvb-ttpci: %s error cmd %04x %04x %04x ret %x "
- "resp %04x %04x pid %d\n",
+ printk("dvb-ttpci: %s error cmd %04x %04x %04x ret %x resp %04x %04x pid %d\n",
__func__, buf[0], buf[1], buf[2], ret,
answ[0], answ[1], dvbdmxfilter->feed->pid);
if (!ret)
@@ -1532,15 +1529,11 @@ static int get_firmware(struct av7110* av7110)
ret = request_firmware(&fw, "dvb-ttpci-01.fw", &av7110->dev->pci->dev);
if (ret) {
if (ret == -ENOENT) {
- printk(KERN_ERR "dvb-ttpci: could not load firmware,"
- " file not found: dvb-ttpci-01.fw\n");
- printk(KERN_ERR "dvb-ttpci: usually this should be in "
- "/usr/lib/hotplug/firmware or /lib/firmware\n");
- printk(KERN_ERR "dvb-ttpci: and can be downloaded from"
- " https://linuxtv.org/download/dvb/firmware/\n");
+ printk(KERN_ERR "dvb-ttpci: could not load firmware, file not found: dvb-ttpci-01.fw\n");
+ printk(KERN_ERR "dvb-ttpci: usually this should be in /usr/lib/hotplug/firmware or /lib/firmware\n");
+ printk(KERN_ERR "dvb-ttpci: and can be downloaded from https://linuxtv.org/download/dvb/firmware/\n");
} else
- printk(KERN_ERR "dvb-ttpci: cannot request firmware"
- " (error %i)\n", ret);
+ printk(KERN_ERR "dvb-ttpci: cannot request firmware (error %i)\n", ret);
return -EINVAL;
}
@@ -2700,8 +2693,7 @@ static int av7110_attach(struct saa7146_dev* dev,
goto err_stop_arm_9;
if (FW_VERSION(av7110->arm_app)<0x2501)
- printk ("dvb-ttpci: Warning, firmware version 0x%04x is too old. "
- "System might be unstable!\n", FW_VERSION(av7110->arm_app));
+ printk ("dvb-ttpci: Warning, firmware version 0x%04x is too old. System might be unstable!\n", FW_VERSION(av7110->arm_app));
thread = kthread_run(arm_thread, (void *) av7110, "arm_mon");
if (IS_ERR(thread)) {
@@ -2944,7 +2936,6 @@ static void __exit av7110_exit(void)
module_init(av7110_init);
module_exit(av7110_exit);
-MODULE_DESCRIPTION("driver for the SAA7146 based AV110 PCI DVB cards by "
- "Siemens, Technotrend, Hauppauge");
+MODULE_DESCRIPTION("driver for the SAA7146 based AV110 PCI DVB cards by Siemens, Technotrend, Hauppauge");
MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, others");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/pci/ttpci/av7110_hw.c b/drivers/media/pci/ttpci/av7110_hw.c
index 0583d56ef5ef..520414cbe087 100644
--- a/drivers/media/pci/ttpci/av7110_hw.c
+++ b/drivers/media/pci/ttpci/av7110_hw.c
@@ -235,8 +235,7 @@ int av7110_bootarm(struct av7110 *av7110)
iwdebi(av7110, DEBISWAP, DPRAM_BASE, 0x76543210, 4);
if ((ret=irdebi(av7110, DEBINOSWAP, DPRAM_BASE, 0, 4)) != 0x10325476) {
- printk(KERN_ERR "dvb-ttpci: debi test in av7110_bootarm() failed: "
- "%08x != %08x (check your BIOS 'Plug&Play OS' settings)\n",
+ printk(KERN_ERR "dvb-ttpci: debi test in av7110_bootarm() failed: %08x != %08x (check your BIOS 'Plug&Play OS' settings)\n",
ret, 0x10325476);
return -1;
}
@@ -262,8 +261,7 @@ int av7110_bootarm(struct av7110 *av7110)
iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2);
if (saa7146_wait_for_debi_done(av7110->dev, 1)) {
- printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): "
- "saa7146_wait_for_debi_done() timed out\n");
+ printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): saa7146_wait_for_debi_done() timed out\n");
return -ETIMEDOUT;
}
saa7146_setgpio(dev, RESET_LINE, SAA7146_GPIO_OUTHI);
@@ -271,8 +269,7 @@ int av7110_bootarm(struct av7110 *av7110)
dprintk(1, "load dram code\n");
if (load_dram(av7110, (u32 *)av7110->bin_root, av7110->size_root) < 0) {
- printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): "
- "load_dram() failed\n");
+ printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): load_dram() failed\n");
return -1;
}
@@ -283,8 +280,7 @@ int av7110_bootarm(struct av7110 *av7110)
mwdebi(av7110, DEBISWAB, DPRAM_BASE, av7110->bin_dpram, av7110->size_dpram);
if (saa7146_wait_for_debi_done(av7110->dev, 1)) {
- printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): "
- "saa7146_wait_for_debi_done() timed out after loading DRAM\n");
+ printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): saa7146_wait_for_debi_done() timed out after loading DRAM\n");
return -ETIMEDOUT;
}
saa7146_setgpio(dev, RESET_LINE, SAA7146_GPIO_OUTHI);
diff --git a/drivers/media/pci/ttpci/budget-av.c b/drivers/media/pci/ttpci/budget-av.c
index 6f0d0161970e..896c66d4b3ae 100644
--- a/drivers/media/pci/ttpci/budget-av.c
+++ b/drivers/media/pci/ttpci/budget-av.c
@@ -1636,5 +1636,4 @@ module_exit(budget_av_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
-MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
- "budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)");
+MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)");
diff --git a/drivers/media/pci/ttpci/budget-ci.c b/drivers/media/pci/ttpci/budget-ci.c
index 7b27af4d9658..20ad93bf0f54 100644
--- a/drivers/media/pci/ttpci/budget-ci.c
+++ b/drivers/media/pci/ttpci/budget-ci.c
@@ -1586,6 +1586,4 @@ module_exit(budget_ci_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Michael Hunold, Jack Thomasson, Andrew de Quincey, others");
-MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
- "budget PCI DVB cards w/ CI-module produced by "
- "Siemens, Technotrend, Hauppauge");
+MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB cards w/ CI-module produced by Siemens, Technotrend, Hauppauge");
diff --git a/drivers/media/pci/ttpci/budget-patch.c b/drivers/media/pci/ttpci/budget-patch.c
index 591dbdfa2a13..f152eda0123a 100644
--- a/drivers/media/pci/ttpci/budget-patch.c
+++ b/drivers/media/pci/ttpci/budget-patch.c
@@ -679,5 +679,4 @@ module_exit(budget_patch_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Emard, Roberto Deza, Holger Waechtler, Michael Hunold, others");
-MODULE_DESCRIPTION("Driver for full TS modified DVB-S SAA7146+AV7110 "
- "based so-called Budget Patch cards");
+MODULE_DESCRIPTION("Driver for full TS modified DVB-S SAA7146+AV7110 based so-called Budget Patch cards");
diff --git a/drivers/media/pci/ttpci/budget.c b/drivers/media/pci/ttpci/budget.c
index fb8ede5a1531..3091b480ce22 100644
--- a/drivers/media/pci/ttpci/budget.c
+++ b/drivers/media/pci/ttpci/budget.c
@@ -897,5 +897,4 @@ module_exit(budget_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
-MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
- "budget PCI DVB cards by Siemens, Technotrend, Hauppauge");
+MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB cards by Siemens, Technotrend, Hauppauge");
diff --git a/drivers/media/pci/ttpci/ttpci-eeprom.c b/drivers/media/pci/ttpci/ttpci-eeprom.c
index 079ee098b7e3..9534f29c1ffd 100644
--- a/drivers/media/pci/ttpci/ttpci-eeprom.c
+++ b/drivers/media/pci/ttpci/ttpci-eeprom.c
@@ -171,5 +171,4 @@ EXPORT_SYMBOL(ttpci_eeprom_parse_mac);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, others");
-MODULE_DESCRIPTION("Decode dvb_net MAC address from EEPROM of PCI DVB cards "
- "made by Siemens, Technotrend, Hauppauge");
+MODULE_DESCRIPTION("Decode dvb_net MAC address from EEPROM of PCI DVB cards made by Siemens, Technotrend, Hauppauge");
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 21/57] [media] tw68: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (19 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 20/57] [media] ttpci: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 22/57] [media] davinci: " Mauro Carvalho Chehab
` (36 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Hans Verkuil, Mauro Carvalho Chehab,
Junghak Sung, Inki Dae, Geunyoung Kim, Julia Lawall, Mel Gorman
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/pci/tw68/tw68-video.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/media/pci/tw68/tw68-video.c b/drivers/media/pci/tw68/tw68-video.c
index a45e02367321..165d54925506 100644
--- a/drivers/media/pci/tw68/tw68-video.c
+++ b/drivers/media/pci/tw68/tw68-video.c
@@ -279,8 +279,7 @@ static int tw68_set_scale(struct tw68_dev *dev, unsigned int width,
height /= 2; /* we must set for 1-frame */
pr_debug("%s: width=%d, height=%d, both=%d\n"
- " tvnorm h_delay=%d, h_start=%d, h_stop=%d, "
- "v_delay=%d, v_start=%d, v_stop=%d\n" , __func__,
+ " tvnorm h_delay=%d, h_start=%d, h_stop=%d, v_delay=%d, v_start=%d, v_stop=%d\n" , __func__,
width, height, V4L2_FIELD_HAS_BOTH(field),
norm->h_delay, norm->h_start, norm->h_stop,
norm->v_delay, norm->video_v_start,
@@ -309,16 +308,14 @@ static int tw68_set_scale(struct tw68_dev *dev, unsigned int width,
V4L2_FIELD_HAS_TOP(field) ? "T" : "",
V4L2_FIELD_HAS_BOTTOM(field) ? "B" : "",
v4l2_norm_to_name(dev->tvnorm->id));
- pr_debug("%s: hactive=%d, hdelay=%d, hscale=%d; "
- "vactive=%d, vdelay=%d, vscale=%d\n", __func__,
+ pr_debug("%s: hactive=%d, hdelay=%d, hscale=%d; vactive=%d, vdelay=%d, vscale=%d\n", __func__,
hactive, hdelay, hscale, vactive, vdelay, vscale);
comb = ((vdelay & 0x300) >> 2) |
((vactive & 0x300) >> 4) |
((hdelay & 0x300) >> 6) |
((hactive & 0x300) >> 8);
- pr_debug("%s: setting CROP_HI=%02x, VDELAY_LO=%02x, "
- "VACTIVE_LO=%02x, HDELAY_LO=%02x, HACTIVE_LO=%02x\n",
+ pr_debug("%s: setting CROP_HI=%02x, VDELAY_LO=%02x, VACTIVE_LO=%02x, HDELAY_LO=%02x, HACTIVE_LO=%02x\n",
__func__, comb, vdelay, vactive, hdelay, hactive);
tw_writeb(TW68_CROP_HI, comb);
tw_writeb(TW68_VDELAY_LO, vdelay & 0xff);
@@ -327,8 +324,7 @@ static int tw68_set_scale(struct tw68_dev *dev, unsigned int width,
tw_writeb(TW68_HACTIVE_LO, hactive & 0xff);
comb = ((vscale & 0xf00) >> 4) | ((hscale & 0xf00) >> 8);
- pr_debug("%s: setting SCALE_HI=%02x, VSCALE_LO=%02x, "
- "HSCALE_LO=%02x\n", __func__, comb, vscale, hscale);
+ pr_debug("%s: setting SCALE_HI=%02x, VSCALE_LO=%02x, HSCALE_LO=%02x\n", __func__, comb, vscale, hscale);
tw_writeb(TW68_SCALE_HI, comb);
tw_writeb(TW68_VSCALE_LO, vscale);
tw_writeb(TW68_HSCALE_LO, hscale);
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 22/57] [media] davinci: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (20 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 21/57] [media] tw68: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-18 16:32 ` Lad, Prabhakar
2016-10-14 20:20 ` Mauro Carvalho Chehab
` (35 subsequent siblings)
57 siblings, 1 reply; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Lad, Prabhakar, Mauro Carvalho Chehab
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/platform/davinci/dm355_ccdc.c | 3 +--
drivers/media/platform/davinci/dm644x_ccdc.c | 3 +--
drivers/media/platform/davinci/vpbe.c | 15 +++++----------
drivers/media/platform/davinci/vpfe_capture.c | 6 ++----
drivers/media/platform/davinci/vpif_capture.c | 9 ++-------
drivers/media/platform/davinci/vpif_display.c | 9 ++-------
drivers/media/platform/davinci/vpss.c | 6 ++----
7 files changed, 15 insertions(+), 36 deletions(-)
diff --git a/drivers/media/platform/davinci/dm355_ccdc.c b/drivers/media/platform/davinci/dm355_ccdc.c
index c90b9a4f0c24..11fa008331dd 100644
--- a/drivers/media/platform/davinci/dm355_ccdc.c
+++ b/drivers/media/platform/davinci/dm355_ccdc.c
@@ -334,8 +334,7 @@ static int ccdc_set_params(void __user *params)
x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params));
if (x) {
- dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying ccdc"
- "params, %d\n", x);
+ dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying ccdcparams, %d\n", x);
return -EFAULT;
}
diff --git a/drivers/media/platform/davinci/dm644x_ccdc.c b/drivers/media/platform/davinci/dm644x_ccdc.c
index 6fba32bec974..a83014da57d5 100644
--- a/drivers/media/platform/davinci/dm644x_ccdc.c
+++ b/drivers/media/platform/davinci/dm644x_ccdc.c
@@ -354,8 +354,7 @@ static int ccdc_set_params(void __user *params)
x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params));
if (x) {
- dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying"
- "ccdc params, %d\n", x);
+ dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copyingccdc params, %d\n", x);
return -EFAULT;
}
diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c
index 9a6c2cc38acb..7d2670732805 100644
--- a/drivers/media/platform/davinci/vpbe.c
+++ b/drivers/media/platform/davinci/vpbe.c
@@ -705,15 +705,13 @@ static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev)
"v4l2 sub device %s registered\n",
enc_info->module_name);
else {
- v4l2_err(&vpbe_dev->v4l2_dev, "encoder %s"
- " failed to register",
+ v4l2_err(&vpbe_dev->v4l2_dev, "encoder %s failed to register",
enc_info->module_name);
ret = -ENODEV;
goto fail_kfree_encoders;
}
} else
- v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c encoders"
- " currently not supported");
+ v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c encoders currently not supported");
}
/* Add amplifier subdevice for dm365 */
if ((strcmp(vpbe_dev->cfg->module_name, "dm365-vpbe-display") == 0) &&
@@ -735,8 +733,7 @@ static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev)
amp_info->module_name);
} else {
vpbe_dev->amp = NULL;
- v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c amplifiers"
- " currently not supported");
+ v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c amplifiers currently not supported");
}
} else {
vpbe_dev->amp = NULL;
@@ -835,15 +832,13 @@ static int vpbe_probe(struct platform_device *pdev)
if (!cfg->module_name[0] ||
!cfg->osd.module_name[0] ||
!cfg->venc.module_name[0]) {
- v4l2_err(pdev->dev.driver, "vpbe display module names not"
- " defined\n");
+ v4l2_err(pdev->dev.driver, "vpbe display module names not defined\n");
return ret;
}
vpbe_dev = kzalloc(sizeof(*vpbe_dev), GFP_KERNEL);
if (vpbe_dev == NULL) {
- v4l2_err(pdev->dev.driver, "Unable to allocate memory"
- " for vpbe_device\n");
+ v4l2_err(pdev->dev.driver, "Unable to allocate memory for vpbe_device\n");
return -ENOMEM;
}
vpbe_dev->cfg = cfg;
diff --git a/drivers/media/platform/davinci/vpfe_capture.c b/drivers/media/platform/davinci/vpfe_capture.c
index 6efb2f1631c4..ca22c3493f55 100644
--- a/drivers/media/platform/davinci/vpfe_capture.c
+++ b/drivers/media/platform/davinci/vpfe_capture.c
@@ -919,8 +919,7 @@ static const struct vpfe_pixel_format *
else
pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
- v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height ="
- " %d, bpp = %d, bytesperline = %d, sizeimage = %d\n",
+ v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height = %d, bpp = %d, bytesperline = %d, sizeimage = %d\n",
pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp,
pixfmt->bytesperline, pixfmt->sizeimage);
return vpfe_pix_fmt;
@@ -1088,8 +1087,7 @@ static int vpfe_enum_input(struct file *file, void *priv,
&subdev,
&index,
inp->index) < 0) {
- v4l2_err(&vpfe_dev->v4l2_dev, "input information not found"
- " for the subdev\n");
+ v4l2_err(&vpfe_dev->v4l2_dev, "input information not found for the subdev\n");
return -EINVAL;
}
sdinfo = &vpfe_dev->cfg->sub_devs[subdev];
diff --git a/drivers/media/platform/davinci/vpif_capture.c b/drivers/media/platform/davinci/vpif_capture.c
index 5104cc0ee40e..c6a3a904afc8 100644
--- a/drivers/media/platform/davinci/vpif_capture.c
+++ b/drivers/media/platform/davinci/vpif_capture.c
@@ -1152,11 +1152,7 @@ static int vpif_s_dv_timings(struct file *file, void *priv,
timings->bt.vfrontporch &&
(timings->bt.vbackporch ||
timings->bt.vsync))) {
- vpif_dbg(2, debug, "Timings for width, height, "
- "horizontal back porch, horizontal sync, "
- "horizontal front porch, vertical back porch, "
- "vertical sync and vertical back porch "
- "must be defined\n");
+ vpif_dbg(2, debug, "Timings for width, height, horizontal back porch, horizontal sync, horizontal front porch, vertical back porch, vertical sync and vertical back porch must be defined\n");
return -EINVAL;
}
@@ -1181,8 +1177,7 @@ static int vpif_s_dv_timings(struct file *file, void *priv,
std_info->l11 = std_info->vsize -
(bt->il_vfrontporch - 1);
} else {
- vpif_dbg(2, debug, "Required timing values for "
- "interlaced BT format missing\n");
+ vpif_dbg(2, debug, "Required timing values for interlaced BT format missing\n");
return -EINVAL;
}
} else {
diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c
index 75b27233ec2f..6b3ea1e8e97f 100644
--- a/drivers/media/platform/davinci/vpif_display.c
+++ b/drivers/media/platform/davinci/vpif_display.c
@@ -954,11 +954,7 @@ static int vpif_s_dv_timings(struct file *file, void *priv,
timings->bt.vfrontporch &&
(timings->bt.vbackporch ||
timings->bt.vsync))) {
- vpif_dbg(2, debug, "Timings for width, height, "
- "horizontal back porch, horizontal sync, "
- "horizontal front porch, vertical back porch, "
- "vertical sync and vertical back porch "
- "must be defined\n");
+ vpif_dbg(2, debug, "Timings for width, height, horizontal back porch, horizontal sync, horizontal front porch, vertical back porch, vertical sync and vertical back porch must be defined\n");
return -EINVAL;
}
@@ -983,8 +979,7 @@ static int vpif_s_dv_timings(struct file *file, void *priv,
std_info->l11 = std_info->vsize -
(bt->il_vfrontporch - 1);
} else {
- vpif_dbg(2, debug, "Required timing values for "
- "interlaced BT format missing\n");
+ vpif_dbg(2, debug, "Required timing values for interlaced BT format missing\n");
return -EINVAL;
}
} else {
diff --git a/drivers/media/platform/davinci/vpss.c b/drivers/media/platform/davinci/vpss.c
index fce86f17dffc..f277c7ee86bf 100644
--- a/drivers/media/platform/davinci/vpss.c
+++ b/drivers/media/platform/davinci/vpss.c
@@ -261,8 +261,7 @@ static int dm355_enable_clock(enum vpss_clock_sel clock_sel, int en)
shift = 6;
break;
default:
- printk(KERN_ERR "dm355_enable_clock:"
- " Invalid selector: %d\n", clock_sel);
+ printk(KERN_ERR "dm355_enable_clock: Invalid selector: %d\n", clock_sel);
return -EINVAL;
}
@@ -421,8 +420,7 @@ static int vpss_probe(struct platform_device *pdev)
else if (!strcmp(platform_name, "dm644x_vpss"))
oper_cfg.platform = DM644X;
else {
- dev_err(&pdev->dev, "vpss driver not supported on"
- " this platform\n");
+ dev_err(&pdev->dev, "vpss driver not supported on this platform\n");
return -ENODEV;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* Re: [PATCH 22/57] [media] davinci: don't break long lines
2016-10-14 20:20 ` [PATCH 22/57] [media] davinci: " Mauro Carvalho Chehab
@ 2016-10-18 16:32 ` Lad, Prabhakar
0 siblings, 0 replies; 79+ messages in thread
From: Lad, Prabhakar @ 2016-10-18 16:32 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Media Mailing List, Mauro Carvalho Chehab, Mauro Carvalho Chehab
Hi Mauro,
Thanks for the patch.
On Fri, Oct 14, 2016 at 9:20 PM, Mauro Carvalho Chehab
<mchehab@s-opensource.com> wrote:
> Due to the 80-cols checkpatch warnings, several strings
> were broken into multiple lines. This is not considered
> a good practice anymore, as it makes harder to grep for
> strings at the source code. So, join those continuation
> lines.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Cheers,
--Prabhakar Lad
^ permalink raw reply [flat|nested] 79+ messages in thread
* [PATCH 23/57] [media] exynos4-is: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
2016-10-14 20:19 ` [PATCH 01/57] [media] b2c2: don't break long lines Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:19 ` [PATCH 03/57] [media] firewire: " Mauro Carvalho Chehab
` (55 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Kyungmin Park, Sylwester Nawrocki,
Mauro Carvalho Chehab, Kukjin Kim, Krzysztof Kozlowski,
Javier Martinez Canillas, linux-arm-kernel, linux-samsung-soc
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/platform/exynos4-is/media-dev.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index 1a1154a9dfa4..e3a8709138fa 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -938,8 +938,7 @@ static int fimc_md_create_links(struct fimc_md *fmd)
csis = fmd->csis[pdata->mux_id].sd;
if (WARN(csis == NULL,
- "MIPI-CSI interface specified "
- "but s5p-csis module is not loaded!\n"))
+ "MIPI-CSI interface specified but s5p-csis module is not loaded!\n"))
return -EINVAL;
pad = sensor->entity.num_pads - 1;
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 23/57] [media] exynos4-is: don't break long lines
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
To: linux-arm-kernel
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/platform/exynos4-is/media-dev.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index 1a1154a9dfa4..e3a8709138fa 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -938,8 +938,7 @@ static int fimc_md_create_links(struct fimc_md *fmd)
csis = fmd->csis[pdata->mux_id].sd;
if (WARN(csis == NULL,
- "MIPI-CSI interface specified "
- "but s5p-csis module is not loaded!\n"))
+ "MIPI-CSI interface specified but s5p-csis module is not loaded!\n"))
return -EINVAL;
pad = sensor->entity.num_pads - 1;
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread
* [PATCH 23/57] [media] exynos4-is: don't break long lines
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: linux-samsung-soc, Krzysztof Kozlowski, Mauro Carvalho Chehab,
Mauro Carvalho Chehab, Javier Martinez Canillas, Kyungmin Park,
Kukjin Kim, Sylwester Nawrocki, Mauro Carvalho Chehab,
linux-arm-kernel, Linux Media Mailing List
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/platform/exynos4-is/media-dev.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index 1a1154a9dfa4..e3a8709138fa 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -938,8 +938,7 @@ static int fimc_md_create_links(struct fimc_md *fmd)
csis = fmd->csis[pdata->mux_id].sd;
if (WARN(csis == NULL,
- "MIPI-CSI interface specified "
- "but s5p-csis module is not loaded!\n"))
+ "MIPI-CSI interface specified but s5p-csis module is not loaded!\n"))
return -EINVAL;
pad = sensor->entity.num_pads - 1;
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread
* [PATCH 24/57] [media] marvell-ccic: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (22 preceding siblings ...)
2016-10-14 20:20 ` Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 25/57] [media] omap: " Mauro Carvalho Chehab
` (33 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Jonathan Corbet, Mauro Carvalho Chehab
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/platform/marvell-ccic/mcam-core.c | 26 +++++++------------------
1 file changed, 7 insertions(+), 19 deletions(-)
diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
index af59bf4dca2d..a8bda6679422 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -49,24 +49,17 @@
static bool alloc_bufs_at_read;
module_param(alloc_bufs_at_read, bool, 0444);
MODULE_PARM_DESC(alloc_bufs_at_read,
- "Non-zero value causes DMA buffers to be allocated when the "
- "video capture device is read, rather than at module load "
- "time. This saves memory, but decreases the chances of "
- "successfully getting those buffers. This parameter is "
- "only used in the vmalloc buffer mode");
+ "Non-zero value causes DMA buffers to be allocated when the video capture device is read, rather than at module load time. This saves memory, but decreases the chances of successfully getting those buffers. This parameter is only used in the vmalloc buffer mode");
static int n_dma_bufs = 3;
module_param(n_dma_bufs, uint, 0644);
MODULE_PARM_DESC(n_dma_bufs,
- "The number of DMA buffers to allocate. Can be either two "
- "(saves memory, makes timing tighter) or three.");
+ "The number of DMA buffers to allocate. Can be either two (saves memory, makes timing tighter) or three.");
static int dma_buf_size = VGA_WIDTH * VGA_HEIGHT * 2; /* Worst case */
module_param(dma_buf_size, uint, 0444);
MODULE_PARM_DESC(dma_buf_size,
- "The size of the allocated DMA buffers. If actual operating "
- "parameters require larger buffers, an attempt to reallocate "
- "will be made.");
+ "The size of the allocated DMA buffers. If actual operating parameters require larger buffers, an attempt to reallocate will be made.");
#else /* MCAM_MODE_VMALLOC */
static const bool alloc_bufs_at_read;
static const int n_dma_bufs = 3; /* Used by S/G_PARM */
@@ -75,15 +68,12 @@ static const int n_dma_bufs = 3; /* Used by S/G_PARM */
static bool flip;
module_param(flip, bool, 0444);
MODULE_PARM_DESC(flip,
- "If set, the sensor will be instructed to flip the image "
- "vertically.");
+ "If set, the sensor will be instructed to flip the image vertically.");
static int buffer_mode = -1;
module_param(buffer_mode, int, 0444);
MODULE_PARM_DESC(buffer_mode,
- "Set the buffer mode to be used; default is to go with what "
- "the platform driver asks for. Set to 0 for vmalloc, 1 for "
- "DMA contiguous.");
+ "Set the buffer mode to be used; default is to go with what the platform driver asks for. Set to 0 for vmalloc, 1 for DMA contiguous.");
/*
* Status flags. Always manipulated with bit operations.
@@ -1759,8 +1749,7 @@ int mccic_register(struct mcam_camera *cam)
cam->buffer_mode = buffer_mode;
if (cam->buffer_mode == B_DMA_sg &&
cam->chip_id == MCAM_CAFE) {
- printk(KERN_ERR "marvell-cam: Cafe can't do S/G I/O, "
- "attempting vmalloc mode instead\n");
+ printk(KERN_ERR "marvell-cam: Cafe can't do S/G I/O, attempting vmalloc mode instead\n");
cam->buffer_mode = B_vmalloc;
}
if (!mcam_buffer_mode_supported(cam->buffer_mode)) {
@@ -1828,8 +1817,7 @@ int mccic_register(struct mcam_camera *cam)
*/
if (cam->buffer_mode == B_vmalloc && !alloc_bufs_at_read) {
if (mcam_alloc_dma_bufs(cam, 1))
- cam_warn(cam, "Unable to alloc DMA buffers at load"
- " will try again later.");
+ cam_warn(cam, "Unable to alloc DMA buffers at load will try again later.");
}
mutex_unlock(&cam->s_mutex);
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 25/57] [media] omap: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (23 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 24/57] [media] marvell-ccic: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-17 13:47 ` Laurent Pinchart
2016-10-14 20:20 ` [PATCH 26/57] [media] omap3isp: " Mauro Carvalho Chehab
` (32 subsequent siblings)
57 siblings, 1 reply; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Hans Verkuil,
Peter Ujfalusi, Laurent Pinchart
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/platform/omap/omap_vout.c | 12 ++++--------
drivers/media/platform/omap/omap_vout_vrfb.c | 3 +--
2 files changed, 5 insertions(+), 10 deletions(-)
diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c
index e668dde6d857..ab0b941c64a4 100644
--- a/drivers/media/platform/omap/omap_vout.c
+++ b/drivers/media/platform/omap/omap_vout.c
@@ -1657,8 +1657,7 @@ static int vidioc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i)
/* Turn of the pipeline */
ret = omapvid_apply_changes(vout);
if (ret)
- v4l2_err(&vout->vid_dev->v4l2_dev, "failed to change mode in"
- " streamoff\n");
+ v4l2_err(&vout->vid_dev->v4l2_dev, "failed to change mode in streamoff\n");
INIT_LIST_HEAD(&vout->dma_queue);
ret = videobuf_streamoff(&vout->vbq);
@@ -1858,8 +1857,7 @@ static int __init omap_vout_setup_video_data(struct omap_vout_device *vout)
vfd = vout->vfd = video_device_alloc();
if (!vfd) {
- printk(KERN_ERR VOUT_NAME ": could not allocate"
- " video device struct\n");
+ printk(KERN_ERR VOUT_NAME ": could not allocate video device struct\n");
v4l2_ctrl_handler_free(hdl);
return -ENOMEM;
}
@@ -1984,16 +1982,14 @@ static int __init omap_vout_create_video_devices(struct platform_device *pdev)
*/
vfd = vout->vfd;
if (video_register_device(vfd, VFL_TYPE_GRABBER, -1) < 0) {
- dev_err(&pdev->dev, ": Could not register "
- "Video for Linux device\n");
+ dev_err(&pdev->dev, ": Could not register Video for Linux device\n");
vfd->minor = -1;
ret = -ENODEV;
goto error2;
}
video_set_drvdata(vfd, vout);
- dev_info(&pdev->dev, ": registered and initialized"
- " video device %d\n", vfd->minor);
+ dev_info(&pdev->dev, ": registered and initialized video device %d\n", vfd->minor);
if (k == (pdev->num_resources - 1))
return 0;
diff --git a/drivers/media/platform/omap/omap_vout_vrfb.c b/drivers/media/platform/omap/omap_vout_vrfb.c
index b8638e4e1627..19768f249192 100644
--- a/drivers/media/platform/omap/omap_vout_vrfb.c
+++ b/drivers/media/platform/omap/omap_vout_vrfb.c
@@ -139,8 +139,7 @@ int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num,
(void *) &vout->vrfb_dma_tx, &vout->vrfb_dma_tx.dma_ch);
if (ret < 0) {
vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
- dev_info(&pdev->dev, ": failed to allocate DMA Channel for"
- " video%d\n", vfd->minor);
+ dev_info(&pdev->dev, ": failed to allocate DMA Channel for video%d\n", vfd->minor);
}
init_waitqueue_head(&vout->vrfb_dma_tx.wait);
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* Re: [PATCH 25/57] [media] omap: don't break long lines
2016-10-14 20:20 ` [PATCH 25/57] [media] omap: " Mauro Carvalho Chehab
@ 2016-10-17 13:47 ` Laurent Pinchart
0 siblings, 0 replies; 79+ messages in thread
From: Laurent Pinchart @ 2016-10-17 13:47 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Media Mailing List, Mauro Carvalho Chehab,
Mauro Carvalho Chehab, Hans Verkuil, Peter Ujfalusi
Hi Mauro,
Thank you for the patch.
On Friday 14 Oct 2016 17:20:13 Mauro Carvalho Chehab wrote:
> Due to the 80-cols checkpatch warnings, several strings
> were broken into multiple lines. This is not considered
> a good practice anymore, as it makes harder to grep for
> strings at the source code. So, join those continuation
> lines.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
> ---
> drivers/media/platform/omap/omap_vout.c | 12 ++++--------
> drivers/media/platform/omap/omap_vout_vrfb.c | 3 +--
> 2 files changed, 5 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/media/platform/omap/omap_vout.c
> b/drivers/media/platform/omap/omap_vout.c index e668dde6d857..ab0b941c64a4
> 100644
> --- a/drivers/media/platform/omap/omap_vout.c
> +++ b/drivers/media/platform/omap/omap_vout.c
> @@ -1657,8 +1657,7 @@ static int vidioc_streamoff(struct file *file, void
> *fh, enum v4l2_buf_type i) /* Turn of the pipeline */
> ret = omapvid_apply_changes(vout);
> if (ret)
> - v4l2_err(&vout->vid_dev->v4l2_dev, "failed to change mode in"
> - " streamoff\n");
> + v4l2_err(&vout->vid_dev->v4l2_dev, "failed to change mode in
> streamoff\n");
As mentioned in a reply to patch 54/57 (if I recall correctly), you should add
a line break after the first argument of the function.
>
> INIT_LIST_HEAD(&vout->dma_queue);
> ret = videobuf_streamoff(&vout->vbq);
> @@ -1858,8 +1857,7 @@ static int __init omap_vout_setup_video_data(struct
> omap_vout_device *vout) vfd = vout->vfd = video_device_alloc();
>
> if (!vfd) {
> - printk(KERN_ERR VOUT_NAME ": could not allocate"
> - " video device struct\n");
> + printk(KERN_ERR VOUT_NAME ": could not allocate video device
struct\n");
> v4l2_ctrl_handler_free(hdl);
> return -ENOMEM;
> }
> @@ -1984,16 +1982,14 @@ static int __init
> omap_vout_create_video_devices(struct platform_device *pdev) */
> vfd = vout->vfd;
> if (video_register_device(vfd, VFL_TYPE_GRABBER, -1) < 0) {
> - dev_err(&pdev->dev, ": Could not register "
> - "Video for Linux device\n");
> + dev_err(&pdev->dev, ": Could not register Video for
Linux device\n");
Same here.
> vfd->minor = -1;
> ret = -ENODEV;
> goto error2;
> }
> video_set_drvdata(vfd, vout);
>
> - dev_info(&pdev->dev, ": registered and initialized"
> - " video device %d\n", vfd->minor);
> + dev_info(&pdev->dev, ": registered and initialized video
device %d\n",
> vfd->minor);
And here, with a line break after the second argument too.
> if (k == (pdev->num_resources - 1))
> return 0;
>
> diff --git a/drivers/media/platform/omap/omap_vout_vrfb.c
> b/drivers/media/platform/omap/omap_vout_vrfb.c index
> b8638e4e1627..19768f249192 100644
> --- a/drivers/media/platform/omap/omap_vout_vrfb.c
> +++ b/drivers/media/platform/omap/omap_vout_vrfb.c
> @@ -139,8 +139,7 @@ int omap_vout_setup_vrfb_bufs(struct platform_device
> *pdev, int vid_num, (void *) &vout->vrfb_dma_tx,
> &vout->vrfb_dma_tx.dma_ch);
> if (ret < 0) {
> vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
> - dev_info(&pdev->dev, ": failed to allocate DMA Channel for"
> - " video%d\n", vfd->minor);
> + dev_info(&pdev->dev, ": failed to allocate DMA Channel for
video%d\n",
> vfd->minor);
Ditto.
> }
> init_waitqueue_head(&vout->vrfb_dma_tx.wait);
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 79+ messages in thread
* [PATCH 26/57] [media] omap3isp: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (24 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 25/57] [media] omap: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-17 13:48 ` Laurent Pinchart
2016-10-14 20:20 ` Mauro Carvalho Chehab
` (31 subsequent siblings)
57 siblings, 1 reply; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Laurent Pinchart, Mauro Carvalho Chehab
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/platform/omap3isp/isp.c | 3 +--
drivers/media/platform/omap3isp/ispccdc.c | 6 ++---
drivers/media/platform/omap3isp/ispcsi2.c | 11 ++------
drivers/media/platform/omap3isp/ispcsiphy.c | 3 +--
drivers/media/platform/omap3isp/isph3a_aewb.c | 6 ++---
drivers/media/platform/omap3isp/isph3a_af.c | 6 ++---
drivers/media/platform/omap3isp/ispstat.c | 36 +++++++++------------------
7 files changed, 22 insertions(+), 49 deletions(-)
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index 0321d84addc7..a9d4347bf100 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -480,8 +480,7 @@ void omap3isp_hist_dma_done(struct isp_device *isp)
omap3isp_stat_pcr_busy(&isp->isp_hist)) {
/* Histogram cannot be enabled in this frame anymore */
atomic_set(&isp->isp_hist.buf_err, 1);
- dev_dbg(isp->dev, "hist: Out of synchronization with "
- "CCDC. Ignoring next buffer.\n");
+ dev_dbg(isp->dev, "hist: Out of synchronization with CCDC. Ignoring next buffer.\n");
}
}
diff --git a/drivers/media/platform/omap3isp/ispccdc.c b/drivers/media/platform/omap3isp/ispccdc.c
index 882310eb45cc..3f8e71c8ea48 100644
--- a/drivers/media/platform/omap3isp/ispccdc.c
+++ b/drivers/media/platform/omap3isp/ispccdc.c
@@ -151,8 +151,7 @@ static int ccdc_lsc_validate_config(struct isp_ccdc_device *ccdc,
}
if (lsc_cfg->offset & 3) {
- dev_dbg(isp->dev, "CCDC: LSC: Offset must be a multiple of "
- "4\n");
+ dev_dbg(isp->dev, "CCDC: LSC: Offset must be a multiple of 4\n");
return -EINVAL;
}
@@ -416,8 +415,7 @@ static int ccdc_lsc_config(struct isp_ccdc_device *ccdc,
return 0;
if (update != (OMAP3ISP_CCDC_CONFIG_LSC | OMAP3ISP_CCDC_TBL_LSC)) {
- dev_dbg(to_device(ccdc), "%s: Both LSC configuration and table "
- "need to be supplied\n", __func__);
+ dev_dbg(to_device(ccdc), "%s: Both LSC configuration and table need to be supplied\n", __func__);
return -EINVAL;
}
diff --git a/drivers/media/platform/omap3isp/ispcsi2.c b/drivers/media/platform/omap3isp/ispcsi2.c
index f75a1be29d84..53a7573ed2a5 100644
--- a/drivers/media/platform/omap3isp/ispcsi2.c
+++ b/drivers/media/platform/omap3isp/ispcsi2.c
@@ -753,8 +753,7 @@ void omap3isp_csi2_isr(struct isp_csi2_device *csi2)
ISPCSI2_PHY_IRQSTATUS);
isp_reg_writel(isp, cpxio1_irqstatus,
csi2->regs1, ISPCSI2_PHY_IRQSTATUS);
- dev_dbg(isp->dev, "CSI2: ComplexIO Error IRQ "
- "%x\n", cpxio1_irqstatus);
+ dev_dbg(isp->dev, "CSI2: ComplexIO Error IRQ %x\n", cpxio1_irqstatus);
pipe->error = true;
}
@@ -763,13 +762,7 @@ void omap3isp_csi2_isr(struct isp_csi2_device *csi2)
ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ |
ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ |
ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ)) {
- dev_dbg(isp->dev, "CSI2 Err:"
- " OCP:%d,"
- " Short_pack:%d,"
- " ECC:%d,"
- " CPXIO2:%d,"
- " FIFO_OVF:%d,"
- "\n",
+ dev_dbg(isp->dev, "CSI2 Err: OCP:%d, Short_pack:%d, ECC:%d, CPXIO2:%d, FIFO_OVF:%d,\n",
(csi2_irqstatus &
ISPCSI2_IRQSTATUS_OCP_ERR_IRQ) ? 1 : 0,
(csi2_irqstatus &
diff --git a/drivers/media/platform/omap3isp/ispcsiphy.c b/drivers/media/platform/omap3isp/ispcsiphy.c
index 495447d66cfd..f67fd2f09f00 100644
--- a/drivers/media/platform/omap3isp/ispcsiphy.c
+++ b/drivers/media/platform/omap3isp/ispcsiphy.c
@@ -267,8 +267,7 @@ int omap3isp_csiphy_acquire(struct isp_csiphy *phy)
int rval;
if (phy->vdd == NULL) {
- dev_err(phy->isp->dev, "Power regulator for CSI PHY not "
- "available\n");
+ dev_err(phy->isp->dev, "Power regulator for CSI PHY not available\n");
return -ENODEV;
}
diff --git a/drivers/media/platform/omap3isp/isph3a_aewb.c b/drivers/media/platform/omap3isp/isph3a_aewb.c
index ccaf92f39236..de9bb3ea032e 100644
--- a/drivers/media/platform/omap3isp/isph3a_aewb.c
+++ b/drivers/media/platform/omap3isp/isph3a_aewb.c
@@ -304,8 +304,7 @@ int omap3isp_h3a_aewb_init(struct isp_device *isp)
aewb_recover_cfg = devm_kzalloc(isp->dev, sizeof(*aewb_recover_cfg),
GFP_KERNEL);
if (!aewb_recover_cfg) {
- dev_err(aewb->isp->dev, "AEWB: cannot allocate memory for "
- "recover configuration.\n");
+ dev_err(aewb->isp->dev, "AEWB: cannot allocate memory for recover configuration.\n");
return -ENOMEM;
}
@@ -321,8 +320,7 @@ int omap3isp_h3a_aewb_init(struct isp_device *isp)
aewb_recover_cfg->subsample_hor_inc = OMAP3ISP_AEWB_MIN_SUB_INC;
if (h3a_aewb_validate_params(aewb, aewb_recover_cfg)) {
- dev_err(aewb->isp->dev, "AEWB: recover configuration is "
- "invalid.\n");
+ dev_err(aewb->isp->dev, "AEWB: recover configuration is invalid.\n");
return -EINVAL;
}
diff --git a/drivers/media/platform/omap3isp/isph3a_af.c b/drivers/media/platform/omap3isp/isph3a_af.c
index 92937f7eecef..42607bda8e86 100644
--- a/drivers/media/platform/omap3isp/isph3a_af.c
+++ b/drivers/media/platform/omap3isp/isph3a_af.c
@@ -367,8 +367,7 @@ int omap3isp_h3a_af_init(struct isp_device *isp)
af_recover_cfg = devm_kzalloc(isp->dev, sizeof(*af_recover_cfg),
GFP_KERNEL);
if (!af_recover_cfg) {
- dev_err(af->isp->dev, "AF: cannot allocate memory for recover "
- "configuration.\n");
+ dev_err(af->isp->dev, "AF: cannot allocate memory for recover configuration.\n");
return -ENOMEM;
}
@@ -379,8 +378,7 @@ int omap3isp_h3a_af_init(struct isp_device *isp)
af_recover_cfg->paxel.v_cnt = OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MIN;
af_recover_cfg->paxel.line_inc = OMAP3ISP_AF_PAXEL_INCREMENT_MIN;
if (h3a_af_validate_params(af, af_recover_cfg)) {
- dev_err(af->isp->dev, "AF: recover configuration is "
- "invalid.\n");
+ dev_err(af->isp->dev, "AF: recover configuration is invalid.\n");
return -EINVAL;
}
diff --git a/drivers/media/platform/omap3isp/ispstat.c b/drivers/media/platform/omap3isp/ispstat.c
index 1b9217d3b1b6..220a9224271b 100644
--- a/drivers/media/platform/omap3isp/ispstat.c
+++ b/drivers/media/platform/omap3isp/ispstat.c
@@ -113,8 +113,7 @@ static int isp_stat_buf_check_magic(struct ispstat *stat,
ret = 0;
if (ret) {
- dev_dbg(stat->isp->dev, "%s: beginning magic check does not "
- "match.\n", stat->subdev.name);
+ dev_dbg(stat->isp->dev, "%s: beginning magic check does not match.\n", stat->subdev.name);
return ret;
}
@@ -122,8 +121,7 @@ static int isp_stat_buf_check_magic(struct ispstat *stat,
for (w = buf->virt_addr + buf_size, end = w + MAGIC_SIZE;
w < end; w++) {
if (unlikely(*w != MAGIC_NUM)) {
- dev_dbg(stat->isp->dev, "%s: ending magic check does "
- "not match.\n", stat->subdev.name);
+ dev_dbg(stat->isp->dev, "%s: ending magic check does not match.\n", stat->subdev.name);
return -EINVAL;
}
}
@@ -256,8 +254,7 @@ static void isp_stat_buf_next(struct ispstat *stat)
{
if (unlikely(stat->active_buf))
/* Overwriting unused active buffer */
- dev_dbg(stat->isp->dev, "%s: new buffer requested without "
- "queuing active one.\n",
+ dev_dbg(stat->isp->dev, "%s: new buffer requested without queuing active one.\n",
stat->subdev.name);
else
stat->active_buf = isp_stat_buf_find_oldest_or_empty(stat);
@@ -292,8 +289,7 @@ static struct ispstat_buffer *isp_stat_buf_get(struct ispstat *stat,
return ERR_PTR(-EBUSY);
}
if (isp_stat_buf_check_magic(stat, buf)) {
- dev_dbg(stat->isp->dev, "%s: current buffer has "
- "corrupted data\n.", stat->subdev.name);
+ dev_dbg(stat->isp->dev, "%s: current buffer has corrupted data\n.", stat->subdev.name);
/* Mark empty because it doesn't have valid data. */
buf->empty = 1;
} else {
@@ -307,8 +303,7 @@ static struct ispstat_buffer *isp_stat_buf_get(struct ispstat *stat,
spin_unlock_irqrestore(&stat->isp->stat_lock, flags);
if (buf->buf_size > data->buf_size) {
- dev_warn(stat->isp->dev, "%s: userspace's buffer size is "
- "not enough.\n", stat->subdev.name);
+ dev_warn(stat->isp->dev, "%s: userspace's buffer size is not enough.\n", stat->subdev.name);
isp_stat_buf_release(stat);
return ERR_PTR(-EINVAL);
}
@@ -531,20 +526,17 @@ int omap3isp_stat_config(struct ispstat *stat, void *new_conf)
mutex_lock(&stat->ioctl_lock);
- dev_dbg(stat->isp->dev, "%s: configuring module with buffer "
- "size=0x%08lx\n", stat->subdev.name, (unsigned long)buf_size);
+ dev_dbg(stat->isp->dev, "%s: configuring module with buffer size=0x%08lx\n", stat->subdev.name, (unsigned long)buf_size);
ret = stat->ops->validate_params(stat, new_conf);
if (ret) {
mutex_unlock(&stat->ioctl_lock);
- dev_dbg(stat->isp->dev, "%s: configuration values are "
- "invalid.\n", stat->subdev.name);
+ dev_dbg(stat->isp->dev, "%s: configuration values are invalid.\n", stat->subdev.name);
return ret;
}
if (buf_size != user_cfg->buf_size)
- dev_dbg(stat->isp->dev, "%s: driver has corrected buffer size "
- "request to 0x%08lx\n", stat->subdev.name,
+ dev_dbg(stat->isp->dev, "%s: driver has corrected buffer size request to 0x%08lx\n", stat->subdev.name,
(unsigned long)user_cfg->buf_size);
/*
@@ -595,8 +587,7 @@ int omap3isp_stat_config(struct ispstat *stat, void *new_conf)
/* Module has a valid configuration. */
stat->configured = 1;
- dev_dbg(stat->isp->dev, "%s: module has been successfully "
- "configured.\n", stat->subdev.name);
+ dev_dbg(stat->isp->dev, "%s: module has been successfully configured.\n", stat->subdev.name);
mutex_unlock(&stat->ioctl_lock);
@@ -762,8 +753,7 @@ int omap3isp_stat_enable(struct ispstat *stat, u8 enable)
if (!stat->configured && enable) {
spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags);
mutex_unlock(&stat->ioctl_lock);
- dev_dbg(stat->isp->dev, "%s: cannot enable module as it's "
- "never been successfully configured so far.\n",
+ dev_dbg(stat->isp->dev, "%s: cannot enable module as it's never been successfully configured so far.\n",
stat->subdev.name);
return -EINVAL;
}
@@ -859,8 +849,7 @@ static void __stat_isr(struct ispstat *stat, int from_dma)
if (stat->state == ISPSTAT_ENABLED) {
spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags);
dev_err(stat->isp->dev,
- "%s: interrupt occurred when module was still "
- "processing a buffer.\n", stat->subdev.name);
+ "%s: interrupt occurred when module was still processing a buffer.\n", stat->subdev.name);
ret = STAT_NO_BUF;
goto out;
} else {
@@ -964,8 +953,7 @@ static void __stat_isr(struct ispstat *stat, int from_dma)
atomic_set(&stat->buf_err, 1);
ret = STAT_NO_BUF;
- dev_dbg(stat->isp->dev, "%s: cannot process buffer, "
- "device is busy.\n", stat->subdev.name);
+ dev_dbg(stat->isp->dev, "%s: cannot process buffer, device is busy.\n", stat->subdev.name);
}
out:
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* Re: [PATCH 26/57] [media] omap3isp: don't break long lines
2016-10-14 20:20 ` [PATCH 26/57] [media] omap3isp: " Mauro Carvalho Chehab
@ 2016-10-17 13:48 ` Laurent Pinchart
0 siblings, 0 replies; 79+ messages in thread
From: Laurent Pinchart @ 2016-10-17 13:48 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Media Mailing List, Mauro Carvalho Chehab, Mauro Carvalho Chehab
Hi Mauro,
Thank you for the patch.
As commented before, please add line breaks after function arguments to keep
lines within the 80 columns limit where possible.
On Friday 14 Oct 2016 17:20:14 Mauro Carvalho Chehab wrote:
> Due to the 80-cols checkpatch warnings, several strings
> were broken into multiple lines. This is not considered
> a good practice anymore, as it makes harder to grep for
> strings at the source code. So, join those continuation
> lines.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
> ---
> drivers/media/platform/omap3isp/isp.c | 3 +--
> drivers/media/platform/omap3isp/ispccdc.c | 6 ++---
> drivers/media/platform/omap3isp/ispcsi2.c | 11 ++------
> drivers/media/platform/omap3isp/ispcsiphy.c | 3 +--
> drivers/media/platform/omap3isp/isph3a_aewb.c | 6 ++---
> drivers/media/platform/omap3isp/isph3a_af.c | 6 ++---
> drivers/media/platform/omap3isp/ispstat.c | 36 ++++++++----------------
> 7 files changed, 22 insertions(+), 49 deletions(-)
>
> diff --git a/drivers/media/platform/omap3isp/isp.c
> b/drivers/media/platform/omap3isp/isp.c index 0321d84addc7..a9d4347bf100
> 100644
> --- a/drivers/media/platform/omap3isp/isp.c
> +++ b/drivers/media/platform/omap3isp/isp.c
> @@ -480,8 +480,7 @@ void omap3isp_hist_dma_done(struct isp_device *isp)
> omap3isp_stat_pcr_busy(&isp->isp_hist)) {
> /* Histogram cannot be enabled in this frame anymore */
> atomic_set(&isp->isp_hist.buf_err, 1);
> - dev_dbg(isp->dev, "hist: Out of synchronization with "
> - "CCDC. Ignoring next buffer.\n");
> + dev_dbg(isp->dev, "hist: Out of synchronization with CCDC.
Ignoring next
> buffer.\n"); }
> }
>
> diff --git a/drivers/media/platform/omap3isp/ispccdc.c
> b/drivers/media/platform/omap3isp/ispccdc.c index
> 882310eb45cc..3f8e71c8ea48 100644
> --- a/drivers/media/platform/omap3isp/ispccdc.c
> +++ b/drivers/media/platform/omap3isp/ispccdc.c
> @@ -151,8 +151,7 @@ static int ccdc_lsc_validate_config(struct
> isp_ccdc_device *ccdc, }
>
> if (lsc_cfg->offset & 3) {
> - dev_dbg(isp->dev, "CCDC: LSC: Offset must be a multiple of "
> - "4\n");
> + dev_dbg(isp->dev, "CCDC: LSC: Offset must be a multiple of
4\n");
> return -EINVAL;
> }
>
> @@ -416,8 +415,7 @@ static int ccdc_lsc_config(struct isp_ccdc_device *ccdc,
> return 0;
>
> if (update != (OMAP3ISP_CCDC_CONFIG_LSC | OMAP3ISP_CCDC_TBL_LSC)) {
> - dev_dbg(to_device(ccdc), "%s: Both LSC configuration and table
"
> - "need to be supplied\n", __func__);
> + dev_dbg(to_device(ccdc), "%s: Both LSC configuration and table
need to be
> supplied\n", __func__); return -EINVAL;
> }
>
> diff --git a/drivers/media/platform/omap3isp/ispcsi2.c
> b/drivers/media/platform/omap3isp/ispcsi2.c index
> f75a1be29d84..53a7573ed2a5 100644
> --- a/drivers/media/platform/omap3isp/ispcsi2.c
> +++ b/drivers/media/platform/omap3isp/ispcsi2.c
> @@ -753,8 +753,7 @@ void omap3isp_csi2_isr(struct isp_csi2_device *csi2)
> ISPCSI2_PHY_IRQSTATUS);
> isp_reg_writel(isp, cpxio1_irqstatus,
> csi2->regs1, ISPCSI2_PHY_IRQSTATUS);
> - dev_dbg(isp->dev, "CSI2: ComplexIO Error IRQ "
> - "%x\n", cpxio1_irqstatus);
> + dev_dbg(isp->dev, "CSI2: ComplexIO Error IRQ %x\n",
cpxio1_irqstatus);
> pipe->error = true;
> }
>
> @@ -763,13 +762,7 @@ void omap3isp_csi2_isr(struct isp_csi2_device *csi2)
> ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ |
> ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ |
> ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ)) {
> - dev_dbg(isp->dev, "CSI2 Err:"
> - " OCP:%d,"
> - " Short_pack:%d,"
> - " ECC:%d,"
> - " CPXIO2:%d,"
> - " FIFO_OVF:%d,"
> - "\n",
> + dev_dbg(isp->dev, "CSI2 Err: OCP:%d, Short_pack:%d, ECC:%d,
CPXIO2:%d,
> FIFO_OVF:%d,\n", (csi2_irqstatus &
> ISPCSI2_IRQSTATUS_OCP_ERR_IRQ) ? 1 : 0,
> (csi2_irqstatus &
> diff --git a/drivers/media/platform/omap3isp/ispcsiphy.c
> b/drivers/media/platform/omap3isp/ispcsiphy.c index
> 495447d66cfd..f67fd2f09f00 100644
> --- a/drivers/media/platform/omap3isp/ispcsiphy.c
> +++ b/drivers/media/platform/omap3isp/ispcsiphy.c
> @@ -267,8 +267,7 @@ int omap3isp_csiphy_acquire(struct isp_csiphy *phy)
> int rval;
>
> if (phy->vdd == NULL) {
> - dev_err(phy->isp->dev, "Power regulator for CSI PHY not "
> - "available\n");
> + dev_err(phy->isp->dev, "Power regulator for CSI PHY not
available\n");
> return -ENODEV;
> }
>
> diff --git a/drivers/media/platform/omap3isp/isph3a_aewb.c
> b/drivers/media/platform/omap3isp/isph3a_aewb.c index
> ccaf92f39236..de9bb3ea032e 100644
> --- a/drivers/media/platform/omap3isp/isph3a_aewb.c
> +++ b/drivers/media/platform/omap3isp/isph3a_aewb.c
> @@ -304,8 +304,7 @@ int omap3isp_h3a_aewb_init(struct isp_device *isp)
> aewb_recover_cfg = devm_kzalloc(isp->dev, sizeof(*aewb_recover_cfg),
> GFP_KERNEL);
> if (!aewb_recover_cfg) {
> - dev_err(aewb->isp->dev, "AEWB: cannot allocate memory for "
> - "recover configuration.\n");
> + dev_err(aewb->isp->dev, "AEWB: cannot allocate memory for
recover
> configuration.\n"); return -ENOMEM;
> }
>
> @@ -321,8 +320,7 @@ int omap3isp_h3a_aewb_init(struct isp_device *isp)
> aewb_recover_cfg->subsample_hor_inc = OMAP3ISP_AEWB_MIN_SUB_INC;
>
> if (h3a_aewb_validate_params(aewb, aewb_recover_cfg)) {
> - dev_err(aewb->isp->dev, "AEWB: recover configuration is "
> - "invalid.\n");
> + dev_err(aewb->isp->dev, "AEWB: recover configuration is
invalid.\n");
> return -EINVAL;
> }
>
> diff --git a/drivers/media/platform/omap3isp/isph3a_af.c
> b/drivers/media/platform/omap3isp/isph3a_af.c index
> 92937f7eecef..42607bda8e86 100644
> --- a/drivers/media/platform/omap3isp/isph3a_af.c
> +++ b/drivers/media/platform/omap3isp/isph3a_af.c
> @@ -367,8 +367,7 @@ int omap3isp_h3a_af_init(struct isp_device *isp)
> af_recover_cfg = devm_kzalloc(isp->dev, sizeof(*af_recover_cfg),
> GFP_KERNEL);
> if (!af_recover_cfg) {
> - dev_err(af->isp->dev, "AF: cannot allocate memory for recover
"
> - "configuration.\n");
> + dev_err(af->isp->dev, "AF: cannot allocate memory for recover
> configuration.\n"); return -ENOMEM;
> }
>
> @@ -379,8 +378,7 @@ int omap3isp_h3a_af_init(struct isp_device *isp)
> af_recover_cfg->paxel.v_cnt = OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MIN;
> af_recover_cfg->paxel.line_inc = OMAP3ISP_AF_PAXEL_INCREMENT_MIN;
> if (h3a_af_validate_params(af, af_recover_cfg)) {
> - dev_err(af->isp->dev, "AF: recover configuration is "
> - "invalid.\n");
> + dev_err(af->isp->dev, "AF: recover configuration is invalid.
\n");
> return -EINVAL;
> }
>
> diff --git a/drivers/media/platform/omap3isp/ispstat.c
> b/drivers/media/platform/omap3isp/ispstat.c index
> 1b9217d3b1b6..220a9224271b 100644
> --- a/drivers/media/platform/omap3isp/ispstat.c
> +++ b/drivers/media/platform/omap3isp/ispstat.c
> @@ -113,8 +113,7 @@ static int isp_stat_buf_check_magic(struct ispstat
> *stat, ret = 0;
>
> if (ret) {
> - dev_dbg(stat->isp->dev, "%s: beginning magic check does not "
> - "match.\n", stat->subdev.name);
> + dev_dbg(stat->isp->dev, "%s: beginning magic check does not
match.\n",
> stat->subdev.name); return ret;
> }
>
> @@ -122,8 +121,7 @@ static int isp_stat_buf_check_magic(struct ispstat
> *stat, for (w = buf->virt_addr + buf_size, end = w + MAGIC_SIZE;
> w < end; w++) {
> if (unlikely(*w != MAGIC_NUM)) {
> - dev_dbg(stat->isp->dev, "%s: ending magic check does "
> - "not match.\n", stat->subdev.name);
> + dev_dbg(stat->isp->dev, "%s: ending magic check does
not match.\n",
> stat->subdev.name); return -EINVAL;
> }
> }
> @@ -256,8 +254,7 @@ static void isp_stat_buf_next(struct ispstat *stat)
> {
> if (unlikely(stat->active_buf))
> /* Overwriting unused active buffer */
> - dev_dbg(stat->isp->dev, "%s: new buffer requested without "
> - "queuing active one.\n",
> + dev_dbg(stat->isp->dev, "%s: new buffer requested without
queuing active
> one.\n", stat->subdev.name);
> else
> stat->active_buf = isp_stat_buf_find_oldest_or_empty(stat);
> @@ -292,8 +289,7 @@ static struct ispstat_buffer *isp_stat_buf_get(struct
> ispstat *stat, return ERR_PTR(-EBUSY);
> }
> if (isp_stat_buf_check_magic(stat, buf)) {
> - dev_dbg(stat->isp->dev, "%s: current buffer has "
> - "corrupted data\n.", stat->subdev.name);
> + dev_dbg(stat->isp->dev, "%s: current buffer has
corrupted data\n.",
> stat->subdev.name); /* Mark empty because it doesn't have valid data. */
> buf->empty = 1;
> } else {
> @@ -307,8 +303,7 @@ static struct ispstat_buffer *isp_stat_buf_get(struct
> ispstat *stat, spin_unlock_irqrestore(&stat->isp->stat_lock, flags);
>
> if (buf->buf_size > data->buf_size) {
> - dev_warn(stat->isp->dev, "%s: userspace's buffer size is "
> - "not enough.\n", stat->subdev.name);
> + dev_warn(stat->isp->dev, "%s: userspace's buffer size is not
enough.\n",
> stat->subdev.name); isp_stat_buf_release(stat);
> return ERR_PTR(-EINVAL);
> }
> @@ -531,20 +526,17 @@ int omap3isp_stat_config(struct ispstat *stat, void
> *new_conf)
>
> mutex_lock(&stat->ioctl_lock);
>
> - dev_dbg(stat->isp->dev, "%s: configuring module with buffer "
> - "size=0x%08lx\n", stat->subdev.name, (unsigned long)buf_size);
> + dev_dbg(stat->isp->dev, "%s: configuring module with buffer
> size=0x%08lx\n", stat->subdev.name, (unsigned long)buf_size);
>
> ret = stat->ops->validate_params(stat, new_conf);
> if (ret) {
> mutex_unlock(&stat->ioctl_lock);
> - dev_dbg(stat->isp->dev, "%s: configuration values are "
> - "invalid.\n", stat->subdev.name);
> + dev_dbg(stat->isp->dev, "%s: configuration values are invalid.
\n",
> stat->subdev.name); return ret;
> }
>
> if (buf_size != user_cfg->buf_size)
> - dev_dbg(stat->isp->dev, "%s: driver has corrected buffer size
"
> - "request to 0x%08lx\n", stat->subdev.name,
> + dev_dbg(stat->isp->dev, "%s: driver has corrected buffer size
request to
> 0x%08lx\n", stat->subdev.name, (unsigned long)user_cfg->buf_size);
>
> /*
> @@ -595,8 +587,7 @@ int omap3isp_stat_config(struct ispstat *stat, void
> *new_conf)
>
> /* Module has a valid configuration. */
> stat->configured = 1;
> - dev_dbg(stat->isp->dev, "%s: module has been successfully "
> - "configured.\n", stat->subdev.name);
> + dev_dbg(stat->isp->dev, "%s: module has been successfully configured.
\n",
> stat->subdev.name);
>
> mutex_unlock(&stat->ioctl_lock);
>
> @@ -762,8 +753,7 @@ int omap3isp_stat_enable(struct ispstat *stat, u8
> enable) if (!stat->configured && enable) {
> spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags);
> mutex_unlock(&stat->ioctl_lock);
> - dev_dbg(stat->isp->dev, "%s: cannot enable module as it's "
> - "never been successfully configured so far.\n",
> + dev_dbg(stat->isp->dev, "%s: cannot enable module as it's
never been
> successfully configured so far.\n", stat->subdev.name);
> return -EINVAL;
> }
> @@ -859,8 +849,7 @@ static void __stat_isr(struct ispstat *stat, int
> from_dma) if (stat->state == ISPSTAT_ENABLED) {
> spin_unlock_irqrestore(&stat->isp->stat_lock,
irqflags);
> dev_err(stat->isp->dev,
> - "%s: interrupt occurred when module was still
"
> - "processing a buffer.\n", stat->subdev.name);
> + "%s: interrupt occurred when module was still
processing a buffer.\n",
> stat->subdev.name); ret = STAT_NO_BUF;
> goto out;
> } else {
> @@ -964,8 +953,7 @@ static void __stat_isr(struct ispstat *stat, int
> from_dma) atomic_set(&stat->buf_err, 1);
>
> ret = STAT_NO_BUF;
> - dev_dbg(stat->isp->dev, "%s: cannot process buffer, "
> - "device is busy.\n", stat-
>subdev.name);
> + dev_dbg(stat->isp->dev, "%s: cannot process buffer, device is
busy.\n",
> stat->subdev.name); }
>
> out:
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 79+ messages in thread
* [PATCH 27/57] [media] s5p-mfc: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:19 ` [PATCH 02/57] [media] dvb-frontends: " Mauro Carvalho Chehab
` (56 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Kyungmin Park, Kamil Debski,
Jeongtae Park, Andrzej Hajda, Mauro Carvalho Chehab,
linux-arm-kernel
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/platform/s5p-mfc/s5p_mfc_dec.c | 6 ++----
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c | 7 ++-----
2 files changed, 4 insertions(+), 9 deletions(-)
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
index 52081ddc9bf2..c0e464dcc7d0 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
@@ -793,8 +793,7 @@ static int vidioc_g_crop(struct file *file, void *priv,
cr->c.top = top;
cr->c.width = ctx->img_width - left - right;
cr->c.height = ctx->img_height - top - bottom;
- mfc_debug(2, "Cropping info [h264]: l=%d t=%d "
- "w=%d h=%d (r=%d b=%d fw=%d fh=%d\n", left, top,
+ mfc_debug(2, "Cropping info [h264]: l=%d t=%d w=%d h=%d (r=%d b=%d fw=%d fh=%d\n", left, top,
cr->c.width, cr->c.height, right, bottom,
ctx->buf_width, ctx->buf_height);
} else {
@@ -802,8 +801,7 @@ static int vidioc_g_crop(struct file *file, void *priv,
cr->c.top = 0;
cr->c.width = ctx->img_width;
cr->c.height = ctx->img_height;
- mfc_debug(2, "Cropping info: w=%d h=%d fw=%d "
- "fh=%d\n", cr->c.width, cr->c.height, ctx->buf_width,
+ mfc_debug(2, "Cropping info: w=%d h=%d fw=%d fh=%d\n", cr->c.width, cr->c.height, ctx->buf_width,
ctx->buf_height);
}
return 0;
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
index 81e1e4ce6c24..f4301d5bbd32 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
@@ -1293,14 +1293,11 @@ static int s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx)
* First set the output frame buffers
*/
if (ctx->capture_state != QUEUE_BUFS_MMAPED) {
- mfc_err("It seems that not all destionation buffers were "
- "mmaped\nMFC requires that all destination are mmaped "
- "before starting processing\n");
+ mfc_err("It seems that not all destionation buffers were mmaped\nMFC requires that all destination are mmaped before starting processing\n");
return -EAGAIN;
}
if (list_empty(&ctx->src_queue)) {
- mfc_err("Header has been deallocated in the middle of"
- " initialization\n");
+ mfc_err("Header has been deallocated in the middle of initialization\n");
return -EIO;
}
temp_vb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 27/57] [media] s5p-mfc: don't break long lines
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
To: linux-arm-kernel
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/platform/s5p-mfc/s5p_mfc_dec.c | 6 ++----
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c | 7 ++-----
2 files changed, 4 insertions(+), 9 deletions(-)
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
index 52081ddc9bf2..c0e464dcc7d0 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
@@ -793,8 +793,7 @@ static int vidioc_g_crop(struct file *file, void *priv,
cr->c.top = top;
cr->c.width = ctx->img_width - left - right;
cr->c.height = ctx->img_height - top - bottom;
- mfc_debug(2, "Cropping info [h264]: l=%d t=%d "
- "w=%d h=%d (r=%d b=%d fw=%d fh=%d\n", left, top,
+ mfc_debug(2, "Cropping info [h264]: l=%d t=%d w=%d h=%d (r=%d b=%d fw=%d fh=%d\n", left, top,
cr->c.width, cr->c.height, right, bottom,
ctx->buf_width, ctx->buf_height);
} else {
@@ -802,8 +801,7 @@ static int vidioc_g_crop(struct file *file, void *priv,
cr->c.top = 0;
cr->c.width = ctx->img_width;
cr->c.height = ctx->img_height;
- mfc_debug(2, "Cropping info: w=%d h=%d fw=%d "
- "fh=%d\n", cr->c.width, cr->c.height, ctx->buf_width,
+ mfc_debug(2, "Cropping info: w=%d h=%d fw=%d fh=%d\n", cr->c.width, cr->c.height, ctx->buf_width,
ctx->buf_height);
}
return 0;
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
index 81e1e4ce6c24..f4301d5bbd32 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
@@ -1293,14 +1293,11 @@ static int s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx)
* First set the output frame buffers
*/
if (ctx->capture_state != QUEUE_BUFS_MMAPED) {
- mfc_err("It seems that not all destionation buffers were "
- "mmaped\nMFC requires that all destination are mmaped "
- "before starting processing\n");
+ mfc_err("It seems that not all destionation buffers were mmaped\nMFC requires that all destination are mmaped before starting processing\n");
return -EAGAIN;
}
if (list_empty(&ctx->src_queue)) {
- mfc_err("Header has been deallocated in the middle of"
- " initialization\n");
+ mfc_err("Header has been deallocated in the middle of initialization\n");
return -EIO;
}
temp_vb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread
* [PATCH 28/57] [media] c8sectpfe: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:19 ` [PATCH 02/57] [media] dvb-frontends: " Mauro Carvalho Chehab
` (56 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Patrice Chotard, Mauro Carvalho Chehab,
linux-arm-kernel, kernel
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c | 15 +++++----------
1 file changed, 5 insertions(+), 10 deletions(-)
diff --git a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
index 30c148b9d65e..7a2c8fdfbe51 100644
--- a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
+++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
@@ -112,8 +112,7 @@ static void channel_swdemux_tsklet(unsigned long data)
buf = (u8 *) channel->back_buffer_aligned;
dev_dbg(fei->dev,
- "chan=%d channel=%p num_packets = %d, buf = %p, pos = 0x%x\n\t"
- "rp=0x%lx, wp=0x%lx\n",
+ "chan=%d channel=%p num_packets = %d, buf = %p, pos = 0x%x\n\trp=0x%lx, wp=0x%lx\n",
channel->tsin_id, channel, num_packets, buf, pos, rp, wp);
for (n = 0; n < num_packets; n++) {
@@ -789,8 +788,7 @@ static int c8sectpfe_probe(struct platform_device *pdev)
/* sanity check value */
if (tsin->tsin_id > fei->hw_stats.num_ib) {
dev_err(&pdev->dev,
- "tsin-num %d specified greater than number\n\t"
- "of input block hw in SoC! (%d)",
+ "tsin-num %d specified greater than number\n\tof input block hw in SoC! (%d)",
tsin->tsin_id, fei->hw_stats.num_ib);
ret = -EINVAL;
goto err_clk_disable;
@@ -855,8 +853,7 @@ static int c8sectpfe_probe(struct platform_device *pdev)
tsin->demux_mapping = index;
dev_dbg(fei->dev,
- "channel=%p n=%d tsin_num=%d, invert-ts-clk=%d\n\t"
- "serial-not-parallel=%d pkt-clk-valid=%d dvb-card=%d\n",
+ "channel=%p n=%d tsin_num=%d, invert-ts-clk=%d\n\tserial-not-parallel=%d pkt-clk-valid=%d dvb-card=%d\n",
fei->channel_data[index], index,
tsin->tsin_id, tsin->invert_ts_clk,
tsin->serial_not_parallel, tsin->async_not_sync,
@@ -1045,8 +1042,7 @@ static void load_imem_segment(struct c8sectpfei *fei, Elf32_Phdr *phdr,
*/
dev_dbg(fei->dev,
- "Loading IMEM segment %d 0x%08x\n\t"
- " (0x%x bytes) -> 0x%p (0x%x bytes)\n", seg_num,
+ "Loading IMEM segment %d 0x%08x\n\t (0x%x bytes) -> 0x%p (0x%x bytes)\n", seg_num,
phdr->p_paddr, phdr->p_filesz,
dest, phdr->p_memsz + phdr->p_memsz / 3);
@@ -1075,8 +1071,7 @@ static void load_dmem_segment(struct c8sectpfei *fei, Elf32_Phdr *phdr,
*/
dev_dbg(fei->dev,
- "Loading DMEM segment %d 0x%08x\n\t"
- "(0x%x bytes) -> 0x%p (0x%x bytes)\n",
+ "Loading DMEM segment %d 0x%08x\n\t(0x%x bytes) -> 0x%p (0x%x bytes)\n",
seg_num, phdr->p_paddr, phdr->p_filesz,
dst, phdr->p_memsz);
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 28/57] [media] c8sectpfe: don't break long lines
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
To: linux-arm-kernel
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c | 15 +++++----------
1 file changed, 5 insertions(+), 10 deletions(-)
diff --git a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
index 30c148b9d65e..7a2c8fdfbe51 100644
--- a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
+++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
@@ -112,8 +112,7 @@ static void channel_swdemux_tsklet(unsigned long data)
buf = (u8 *) channel->back_buffer_aligned;
dev_dbg(fei->dev,
- "chan=%d channel=%p num_packets = %d, buf = %p, pos = 0x%x\n\t"
- "rp=0x%lx, wp=0x%lx\n",
+ "chan=%d channel=%p num_packets = %d, buf = %p, pos = 0x%x\n\trp=0x%lx, wp=0x%lx\n",
channel->tsin_id, channel, num_packets, buf, pos, rp, wp);
for (n = 0; n < num_packets; n++) {
@@ -789,8 +788,7 @@ static int c8sectpfe_probe(struct platform_device *pdev)
/* sanity check value */
if (tsin->tsin_id > fei->hw_stats.num_ib) {
dev_err(&pdev->dev,
- "tsin-num %d specified greater than number\n\t"
- "of input block hw in SoC! (%d)",
+ "tsin-num %d specified greater than number\n\tof input block hw in SoC! (%d)",
tsin->tsin_id, fei->hw_stats.num_ib);
ret = -EINVAL;
goto err_clk_disable;
@@ -855,8 +853,7 @@ static int c8sectpfe_probe(struct platform_device *pdev)
tsin->demux_mapping = index;
dev_dbg(fei->dev,
- "channel=%p n=%d tsin_num=%d, invert-ts-clk=%d\n\t"
- "serial-not-parallel=%d pkt-clk-valid=%d dvb-card=%d\n",
+ "channel=%p n=%d tsin_num=%d, invert-ts-clk=%d\n\tserial-not-parallel=%d pkt-clk-valid=%d dvb-card=%d\n",
fei->channel_data[index], index,
tsin->tsin_id, tsin->invert_ts_clk,
tsin->serial_not_parallel, tsin->async_not_sync,
@@ -1045,8 +1042,7 @@ static void load_imem_segment(struct c8sectpfei *fei, Elf32_Phdr *phdr,
*/
dev_dbg(fei->dev,
- "Loading IMEM segment %d 0x%08x\n\t"
- " (0x%x bytes) -> 0x%p (0x%x bytes)\n", seg_num,
+ "Loading IMEM segment %d 0x%08x\n\t (0x%x bytes) -> 0x%p (0x%x bytes)\n", seg_num,
phdr->p_paddr, phdr->p_filesz,
dest, phdr->p_memsz + phdr->p_memsz / 3);
@@ -1075,8 +1071,7 @@ static void load_dmem_segment(struct c8sectpfei *fei, Elf32_Phdr *phdr,
*/
dev_dbg(fei->dev,
- "Loading DMEM segment %d 0x%08x\n\t"
- "(0x%x bytes) -> 0x%p (0x%x bytes)\n",
+ "Loading DMEM segment %d 0x%08x\n\t(0x%x bytes) -> 0x%p (0x%x bytes)\n",
seg_num, phdr->p_paddr, phdr->p_filesz,
dst, phdr->p_memsz);
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* Re: [STLinux Kernel] [PATCH 28/57] [media] c8sectpfe: don't break long lines
2016-10-14 20:20 ` Mauro Carvalho Chehab
@ 2016-10-17 6:41 ` Peter Griffin
-1 siblings, 0 replies; 79+ messages in thread
From: Peter Griffin @ 2016-10-17 6:41 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: kernel, Mauro Carvalho Chehab, Mauro Carvalho Chehab,
linux-arm-kernel, Linux Media Mailing List
On Fri, 14 Oct 2016, Mauro Carvalho Chehab wrote:
> Due to the 80-cols checkpatch warnings, several strings
> were broken into multiple lines. This is not considered
> a good practice anymore, as it makes harder to grep for
> strings at the source code. So, join those continuation
> lines.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
> ---
> drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c | 15 +++++----------
Acked-by: Peter Griffin <peter.griffin@linaro.org>
^ permalink raw reply [flat|nested] 79+ messages in thread
* [STLinux Kernel] [PATCH 28/57] [media] c8sectpfe: don't break long lines
@ 2016-10-17 6:41 ` Peter Griffin
0 siblings, 0 replies; 79+ messages in thread
From: Peter Griffin @ 2016-10-17 6:41 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, 14 Oct 2016, Mauro Carvalho Chehab wrote:
> Due to the 80-cols checkpatch warnings, several strings
> were broken into multiple lines. This is not considered
> a good practice anymore, as it makes harder to grep for
> strings at the source code. So, join those continuation
> lines.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
> ---
> drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c | 15 +++++----------
Acked-by: Peter Griffin <peter.griffin@linaro.org>
^ permalink raw reply [flat|nested] 79+ messages in thread
* [PATCH 29/57] [media] ti-vpe: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (27 preceding siblings ...)
2016-10-14 20:20 ` Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 21:18 ` Benoit Parrot
2016-10-14 20:20 ` [PATCH 30/57] [media] si470x: " Mauro Carvalho Chehab
` (28 subsequent siblings)
57 siblings, 1 reply; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Benoit Parrot, Mauro Carvalho Chehab
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/platform/ti-vpe/vpdma.c | 12 ++++--------
drivers/media/platform/ti-vpe/vpe.c | 3 +--
2 files changed, 5 insertions(+), 10 deletions(-)
diff --git a/drivers/media/platform/ti-vpe/vpdma.c b/drivers/media/platform/ti-vpe/vpdma.c
index 3e2e3a33e6ed..079a0c894d02 100644
--- a/drivers/media/platform/ti-vpe/vpdma.c
+++ b/drivers/media/platform/ti-vpe/vpdma.c
@@ -466,8 +466,7 @@ static void dump_cfd(struct vpdma_cfd *cfd)
pr_debug("word2: payload_addr = 0x%08x\n", cfd->payload_addr);
- pr_debug("word3: pkt_type = %d, direct = %d, class = %d, dest = %d, "
- "payload_len = %d\n", cfd_get_pkt_type(cfd),
+ pr_debug("word3: pkt_type = %d, direct = %d, class = %d, dest = %d, payload_len = %d\n", cfd_get_pkt_type(cfd),
cfd_get_direct(cfd), class, cfd_get_dest(cfd),
cfd_get_payload_len(cfd));
}
@@ -574,8 +573,7 @@ static void dump_dtd(struct vpdma_dtd *dtd)
pr_debug("%s data transfer descriptor for channel %d\n",
dir == DTD_DIR_OUT ? "outbound" : "inbound", chan);
- pr_debug("word0: data_type = %d, notify = %d, field = %d, 1D = %d, "
- "even_ln_skp = %d, odd_ln_skp = %d, line_stride = %d\n",
+ pr_debug("word0: data_type = %d, notify = %d, field = %d, 1D = %d, even_ln_skp = %d, odd_ln_skp = %d, line_stride = %d\n",
dtd_get_data_type(dtd), dtd_get_notify(dtd), dtd_get_field(dtd),
dtd_get_1d(dtd), dtd_get_even_line_skip(dtd),
dtd_get_odd_line_skip(dtd), dtd_get_line_stride(dtd));
@@ -586,8 +584,7 @@ static void dump_dtd(struct vpdma_dtd *dtd)
pr_debug("word2: start_addr = %pad\n", &dtd->start_addr);
- pr_debug("word3: pkt_type = %d, mode = %d, dir = %d, chan = %d, "
- "pri = %d, next_chan = %d\n", dtd_get_pkt_type(dtd),
+ pr_debug("word3: pkt_type = %d, mode = %d, dir = %d, chan = %d, pri = %d, next_chan = %d\n", dtd_get_pkt_type(dtd),
dtd_get_mode(dtd), dir, chan, dtd_get_priority(dtd),
dtd_get_next_chan(dtd));
@@ -595,8 +592,7 @@ static void dump_dtd(struct vpdma_dtd *dtd)
pr_debug("word4: frame_width = %d, frame_height = %d\n",
dtd_get_frame_width(dtd), dtd_get_frame_height(dtd));
else
- pr_debug("word4: desc_write_addr = 0x%08x, write_desc = %d, "
- "drp_data = %d, use_desc_reg = %d\n",
+ pr_debug("word4: desc_write_addr = 0x%08x, write_desc = %d, drp_data = %d, use_desc_reg = %d\n",
dtd_get_desc_write_addr(dtd), dtd_get_write_desc(dtd),
dtd_get_drop_data(dtd), dtd_get_use_desc(dtd));
diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 0189f7f7cb03..1cf4a4c1b899 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1263,8 +1263,7 @@ static irqreturn_t vpe_irq(int irq_vpe, void *data)
}
if (irqst0 | irqst1) {
- dev_warn(dev->v4l2_dev.dev, "Unexpected interrupt: "
- "INT0_STATUS0 = 0x%08x, INT0_STATUS1 = 0x%08x\n",
+ dev_warn(dev->v4l2_dev.dev, "Unexpected interrupt: INT0_STATUS0 = 0x%08x, INT0_STATUS1 = 0x%08x\n",
irqst0, irqst1);
}
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* Re: [PATCH 29/57] [media] ti-vpe: don't break long lines
2016-10-14 20:20 ` [PATCH 29/57] [media] ti-vpe: " Mauro Carvalho Chehab
@ 2016-10-14 21:18 ` Benoit Parrot
0 siblings, 0 replies; 79+ messages in thread
From: Benoit Parrot @ 2016-10-14 21:18 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Media Mailing List, Mauro Carvalho Chehab, Mauro Carvalho Chehab
Acked-by: Benoit Parrot <bparrot@ti.com>
Mauro Carvalho Chehab <mchehab@s-opensource.com> wrote on Fri [2016-Oct-14 17:20:17 -0300]:
> Due to the 80-cols checkpatch warnings, several strings
> were broken into multiple lines. This is not considered
> a good practice anymore, as it makes harder to grep for
> strings at the source code. So, join those continuation
> lines.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
> ---
> drivers/media/platform/ti-vpe/vpdma.c | 12 ++++--------
> drivers/media/platform/ti-vpe/vpe.c | 3 +--
> 2 files changed, 5 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/media/platform/ti-vpe/vpdma.c b/drivers/media/platform/ti-vpe/vpdma.c
> index 3e2e3a33e6ed..079a0c894d02 100644
> --- a/drivers/media/platform/ti-vpe/vpdma.c
> +++ b/drivers/media/platform/ti-vpe/vpdma.c
> @@ -466,8 +466,7 @@ static void dump_cfd(struct vpdma_cfd *cfd)
>
> pr_debug("word2: payload_addr = 0x%08x\n", cfd->payload_addr);
>
> - pr_debug("word3: pkt_type = %d, direct = %d, class = %d, dest = %d, "
> - "payload_len = %d\n", cfd_get_pkt_type(cfd),
> + pr_debug("word3: pkt_type = %d, direct = %d, class = %d, dest = %d, payload_len = %d\n", cfd_get_pkt_type(cfd),
> cfd_get_direct(cfd), class, cfd_get_dest(cfd),
> cfd_get_payload_len(cfd));
> }
> @@ -574,8 +573,7 @@ static void dump_dtd(struct vpdma_dtd *dtd)
> pr_debug("%s data transfer descriptor for channel %d\n",
> dir == DTD_DIR_OUT ? "outbound" : "inbound", chan);
>
> - pr_debug("word0: data_type = %d, notify = %d, field = %d, 1D = %d, "
> - "even_ln_skp = %d, odd_ln_skp = %d, line_stride = %d\n",
> + pr_debug("word0: data_type = %d, notify = %d, field = %d, 1D = %d, even_ln_skp = %d, odd_ln_skp = %d, line_stride = %d\n",
> dtd_get_data_type(dtd), dtd_get_notify(dtd), dtd_get_field(dtd),
> dtd_get_1d(dtd), dtd_get_even_line_skip(dtd),
> dtd_get_odd_line_skip(dtd), dtd_get_line_stride(dtd));
> @@ -586,8 +584,7 @@ static void dump_dtd(struct vpdma_dtd *dtd)
>
> pr_debug("word2: start_addr = %pad\n", &dtd->start_addr);
>
> - pr_debug("word3: pkt_type = %d, mode = %d, dir = %d, chan = %d, "
> - "pri = %d, next_chan = %d\n", dtd_get_pkt_type(dtd),
> + pr_debug("word3: pkt_type = %d, mode = %d, dir = %d, chan = %d, pri = %d, next_chan = %d\n", dtd_get_pkt_type(dtd),
> dtd_get_mode(dtd), dir, chan, dtd_get_priority(dtd),
> dtd_get_next_chan(dtd));
>
> @@ -595,8 +592,7 @@ static void dump_dtd(struct vpdma_dtd *dtd)
> pr_debug("word4: frame_width = %d, frame_height = %d\n",
> dtd_get_frame_width(dtd), dtd_get_frame_height(dtd));
> else
> - pr_debug("word4: desc_write_addr = 0x%08x, write_desc = %d, "
> - "drp_data = %d, use_desc_reg = %d\n",
> + pr_debug("word4: desc_write_addr = 0x%08x, write_desc = %d, drp_data = %d, use_desc_reg = %d\n",
> dtd_get_desc_write_addr(dtd), dtd_get_write_desc(dtd),
> dtd_get_drop_data(dtd), dtd_get_use_desc(dtd));
>
> diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
> index 0189f7f7cb03..1cf4a4c1b899 100644
> --- a/drivers/media/platform/ti-vpe/vpe.c
> +++ b/drivers/media/platform/ti-vpe/vpe.c
> @@ -1263,8 +1263,7 @@ static irqreturn_t vpe_irq(int irq_vpe, void *data)
> }
>
> if (irqst0 | irqst1) {
> - dev_warn(dev->v4l2_dev.dev, "Unexpected interrupt: "
> - "INT0_STATUS0 = 0x%08x, INT0_STATUS1 = 0x%08x\n",
> + dev_warn(dev->v4l2_dev.dev, "Unexpected interrupt: INT0_STATUS0 = 0x%08x, INT0_STATUS1 = 0x%08x\n",
> irqst0, irqst1);
> }
>
> --
> 2.7.4
>
>
^ permalink raw reply [flat|nested] 79+ messages in thread
* [PATCH 30/57] [media] si470x: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (28 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 29/57] [media] ti-vpe: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 31/57] [media] si4713: " Mauro Carvalho Chehab
` (27 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Hans Verkuil, Mauro Carvalho Chehab,
Markus Elfring
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/radio/si470x/radio-si470x-i2c.c | 6 ++----
drivers/media/radio/si470x/radio-si470x-usb.c | 12 ++++--------
2 files changed, 6 insertions(+), 12 deletions(-)
diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c
index ee0470a3196b..ba622439f121 100644
--- a/drivers/media/radio/si470x/radio-si470x-i2c.c
+++ b/drivers/media/radio/si470x/radio-si470x-i2c.c
@@ -387,8 +387,7 @@ static int si470x_i2c_probe(struct i2c_client *client,
radio->registers[DEVICEID], radio->registers[SI_CHIPID]);
if ((radio->registers[SI_CHIPID] & SI_CHIPID_FIRMWARE) < RADIO_FW_VERSION) {
dev_warn(&client->dev,
- "This driver is known to work with "
- "firmware version %hu,\n", RADIO_FW_VERSION);
+ "This driver is known to work with firmware version %hu,\n", RADIO_FW_VERSION);
dev_warn(&client->dev,
"but the device has firmware version %hu.\n",
radio->registers[SI_CHIPID] & SI_CHIPID_FIRMWARE);
@@ -400,8 +399,7 @@ static int si470x_i2c_probe(struct i2c_client *client,
dev_warn(&client->dev,
"If you have some trouble using this driver,\n");
dev_warn(&client->dev,
- "please report to V4L ML at "
- "linux-media@vger.kernel.org\n");
+ "please report to V4L ML at linux-media@vger.kernel.org\n");
}
/* set initial frequency */
diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c
index 4b132c29f290..18e0c7ec2056 100644
--- a/drivers/media/radio/si470x/radio-si470x-usb.c
+++ b/drivers/media/radio/si470x/radio-si470x-usb.c
@@ -351,8 +351,7 @@ static int si470x_get_scratch_page_versions(struct si470x_device *radio)
retval = si470x_get_report(radio, radio->usb_buf, SCRATCH_REPORT_SIZE);
if (retval < 0)
- dev_warn(&radio->intf->dev, "si470x_get_scratch: "
- "si470x_get_report returned %d\n", retval);
+ dev_warn(&radio->intf->dev, "si470x_get_scratch: si470x_get_report returned %d\n", retval);
else {
radio->software_version = radio->usb_buf[1];
radio->hardware_version = radio->usb_buf[2];
@@ -688,8 +687,7 @@ static int si470x_usb_driver_probe(struct usb_interface *intf,
radio->registers[DEVICEID], radio->registers[SI_CHIPID]);
if ((radio->registers[SI_CHIPID] & SI_CHIPID_FIRMWARE) < RADIO_FW_VERSION) {
dev_warn(&intf->dev,
- "This driver is known to work with "
- "firmware version %hu,\n", RADIO_FW_VERSION);
+ "This driver is known to work with firmware version %hu,\n", RADIO_FW_VERSION);
dev_warn(&intf->dev,
"but the device has firmware version %hu.\n",
radio->registers[SI_CHIPID] & SI_CHIPID_FIRMWARE);
@@ -705,8 +703,7 @@ static int si470x_usb_driver_probe(struct usb_interface *intf,
radio->software_version, radio->hardware_version);
if (radio->hardware_version < RADIO_HW_VERSION) {
dev_warn(&intf->dev,
- "This driver is known to work with "
- "hardware version %hu,\n", RADIO_HW_VERSION);
+ "This driver is known to work with hardware version %hu,\n", RADIO_HW_VERSION);
dev_warn(&intf->dev,
"but the device has hardware version %hu.\n",
radio->hardware_version);
@@ -718,8 +715,7 @@ static int si470x_usb_driver_probe(struct usb_interface *intf,
dev_warn(&intf->dev,
"If you have some trouble using this driver,\n");
dev_warn(&intf->dev,
- "please report to V4L ML at "
- "linux-media@vger.kernel.org\n");
+ "please report to V4L ML at linux-media@vger.kernel.org\n");
}
/* set led to connect state */
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 31/57] [media] si4713: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (29 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 30/57] [media] si470x: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 32/57] [media] wl128x: " Mauro Carvalho Chehab
` (26 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Eduardo Valentin, Mauro Carvalho Chehab
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/radio/si4713/si4713.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/media/radio/si4713/si4713.c b/drivers/media/radio/si4713/si4713.c
index 0b04b56571da..797d35e4d0d2 100644
--- a/drivers/media/radio/si4713/si4713.c
+++ b/drivers/media/radio/si4713/si4713.c
@@ -716,8 +716,7 @@ static int si4713_tx_tune_status(struct si4713_device *sdev, u8 intack,
*power = val[5];
*antcap = val[6];
*noise = val[7];
- v4l2_dbg(1, debug, &sdev->sd, "%s: response: %d x 10 kHz "
- "(power %d, antcap %d, rnl %d)\n", __func__,
+ v4l2_dbg(1, debug, &sdev->sd, "%s: response: %d x 10 kHz (power %d, antcap %d, rnl %d)\n", __func__,
*frequency, *power, *antcap, *noise);
}
@@ -758,9 +757,7 @@ static int si4713_tx_rds_buff(struct si4713_device *sdev, u8 mode, u16 rdsb,
v4l2_dbg(1, debug, &sdev->sd,
"%s: status=0x%02x\n", __func__, val[0]);
*cbleft = (s8)val[2] - val[3];
- v4l2_dbg(1, debug, &sdev->sd, "%s: response: interrupts"
- " 0x%02x cb avail: %d cb used %d fifo avail"
- " %d fifo used %d\n", __func__, val[1],
+ v4l2_dbg(1, debug, &sdev->sd, "%s: response: interrupts 0x%02x cb avail: %d cb used %d fifo avail %d fifo used %d\n", __func__, val[1],
val[2], val[3], val[4], val[5]);
}
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 32/57] [media] wl128x: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (30 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 31/57] [media] si4713: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 33/57] [media] au0828: " Mauro Carvalho Chehab
` (25 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Marcel Holtmann,
Samuel Ortiz, Hans Verkuil, Geert Uytterhoeven, Dan Carpenter
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/radio/wl128x/fmdrv_common.c | 21 +++++++--------------
drivers/media/radio/wl128x/fmdrv_rx.c | 6 ++----
2 files changed, 9 insertions(+), 18 deletions(-)
diff --git a/drivers/media/radio/wl128x/fmdrv_common.c b/drivers/media/radio/wl128x/fmdrv_common.c
index 642b89c66bcb..db7c1c549fcf 100644
--- a/drivers/media/radio/wl128x/fmdrv_common.c
+++ b/drivers/media/radio/wl128x/fmdrv_common.c
@@ -230,8 +230,7 @@ inline void dump_rx_skb_data(struct sk_buff *skb)
struct fm_event_msg_hdr *evt_hdr;
evt_hdr = (struct fm_event_msg_hdr *)skb->data;
- printk(KERN_INFO ">> hdr:%02x len:%02x sts:%02x numhci:%02x "
- "opcode:%02x type:%s dlen:%02x", evt_hdr->hdr, evt_hdr->len,
+ printk(KERN_INFO ">> hdr:%02x len:%02x sts:%02x numhci:%02x opcode:%02x type:%s dlen:%02x", evt_hdr->hdr, evt_hdr->len,
evt_hdr->status, evt_hdr->num_fm_hci_cmds, evt_hdr->op,
(evt_hdr->rd_wr) ? "RD" : "WR", evt_hdr->dlen);
@@ -271,8 +270,7 @@ static void recv_tasklet(unsigned long arg)
/* Process all packets in the RX queue */
while ((skb = skb_dequeue(&fmdev->rx_q))) {
if (skb->len < sizeof(struct fm_event_msg_hdr)) {
- fmerr("skb(%p) has only %d bytes, "
- "at least need %zu bytes to decode\n", skb,
+ fmerr("skb(%p) has only %d bytes, at least need %zu bytes to decode\n", skb,
skb->len, sizeof(struct fm_event_msg_hdr));
kfree_skb(skb);
continue;
@@ -472,8 +470,7 @@ int fmc_send_cmd(struct fmdev *fmdev, u8 fm_op, u16 type, void *payload,
if (!wait_for_completion_timeout(&fmdev->maintask_comp,
FM_DRV_TX_TIMEOUT)) {
- fmerr("Timeout(%d sec),didn't get reg"
- "completion signal from RX tasklet\n",
+ fmerr("Timeout(%d sec),didn't get regcompletion signal from RX tasklet\n",
jiffies_to_msecs(FM_DRV_TX_TIMEOUT) / 1000);
return -ETIMEDOUT;
}
@@ -523,8 +520,7 @@ static inline int check_cmdresp_status(struct fmdev *fmdev,
fm_evt_hdr = (void *)(*skb)->data;
if (fm_evt_hdr->status != 0) {
- fmerr("irq: opcode %x response status is not zero "
- "Initiating irq recovery process\n",
+ fmerr("irq: opcode %x response status is not zero Initiating irq recovery process\n",
fm_evt_hdr->op);
mod_timer(&fmdev->irq_info.timer, jiffies + FM_DRV_TX_TIMEOUT);
@@ -564,8 +560,7 @@ static void int_timeout_handler(unsigned long data)
* reset stage index & retry count values */
fmirq->stage = 0;
fmirq->retry = 0;
- fmerr("Recovery action failed during"
- "irq processing, max retry reached\n");
+ fmerr("Recovery action failed duringirq processing, max retry reached\n");
return;
}
fm_irq_call_stage(fmdev, FM_SEND_INTMSK_CMD_IDX);
@@ -1516,14 +1511,12 @@ int fmc_prepare(struct fmdev *fmdev)
if (!wait_for_completion_timeout(&wait_for_fmdrv_reg_comp,
FM_ST_REG_TIMEOUT)) {
- fmerr("Timeout(%d sec), didn't get reg "
- "completion signal from ST\n",
+ fmerr("Timeout(%d sec), didn't get reg completion signal from ST\n",
jiffies_to_msecs(FM_ST_REG_TIMEOUT) / 1000);
return -ETIMEDOUT;
}
if (fmdev->streg_cbdata != 0) {
- fmerr("ST reg comp CB called with error "
- "status %d\n", fmdev->streg_cbdata);
+ fmerr("ST reg comp CB called with error status %d\n", fmdev->streg_cbdata);
return -EAGAIN;
}
diff --git a/drivers/media/radio/wl128x/fmdrv_rx.c b/drivers/media/radio/wl128x/fmdrv_rx.c
index cfaeb2417fbb..84dfad13e4df 100644
--- a/drivers/media/radio/wl128x/fmdrv_rx.c
+++ b/drivers/media/radio/wl128x/fmdrv_rx.c
@@ -120,8 +120,7 @@ int fm_rx_set_freq(struct fmdev *fmdev, u32 freq)
curr_frq_in_khz = (fmdev->rx.region.bot_freq + ((u32)curr_frq * FM_FREQ_MUL));
if (curr_frq_in_khz != freq) {
- pr_info("Frequency is set to (%d) but "
- "requested freq is (%d)\n", curr_frq_in_khz, freq);
+ pr_info("Frequency is set to (%d) but requested freq is (%d)\n", curr_frq_in_khz, freq);
}
/* Update local cache */
@@ -390,8 +389,7 @@ int fm_rx_set_region(struct fmdev *fmdev, u8 region_to_set)
new_frq = fmdev->rx.region.top_freq;
if (new_frq) {
- fmdbg("Current freq is not within band limit boundary,"
- "switching to %d KHz\n", new_frq);
+ fmdbg("Current freq is not within band limit boundary,switching to %d KHz\n", new_frq);
/* Current RX frequency is not in range. So, update it */
ret = fm_rx_set_freq(fmdev, new_frq);
}
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 33/57] [media] au0828: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (31 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 32/57] [media] wl128x: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 34/57] [media] b2c2: " Mauro Carvalho Chehab
` (24 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Shuah Khan,
Hans Verkuil, Laurent Pinchart, Seung-Woo Kim, Junghak Sung,
Wolfram Sang, Rafael Lourenço de Lima Chehab
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/usb/au0828/au0828-video.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/media/usb/au0828/au0828-video.c b/drivers/media/usb/au0828/au0828-video.c
index 85dd9a8e83ff..7a10eaa38f67 100644
--- a/drivers/media/usb/au0828/au0828-video.c
+++ b/drivers/media/usb/au0828/au0828-video.c
@@ -253,8 +253,7 @@ static int au0828_init_isoc(struct au0828_dev *dev, int max_packets,
dev->isoc_ctl.transfer_buffer[i] = usb_alloc_coherent(dev->usbdev,
sb_size, GFP_KERNEL, &urb->transfer_dma);
if (!dev->isoc_ctl.transfer_buffer[i]) {
- printk("unable to allocate %i bytes for transfer"
- " buffer %i%s\n",
+ printk("unable to allocate %i bytes for transfer buffer %i%s\n",
sb_size, i,
in_interrupt() ? " while in int" : "");
au0828_uninit_isoc(dev);
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 34/57] [media] b2c2: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (32 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 33/57] [media] au0828: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 35/57] [media] cpia2: " Mauro Carvalho Chehab
` (23 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Patrick Boettcher
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/usb/b2c2/flexcop-usb.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c
index d4bdba60b0f7..f9b07649a862 100644
--- a/drivers/media/usb/b2c2/flexcop-usb.c
+++ b/drivers/media/usb/b2c2/flexcop-usb.c
@@ -33,8 +33,7 @@
static int debug;
module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2,"
- "ctrl=4,i2c=8,v8mem=16 (or-able))." DEBSTATUS);
+MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2,ctrl=4,i2c=8,v8mem=16 (or-able))." DEBSTATUS);
#undef DEBSTATUS
#define deb_info(args...) dprintk(0x01, args)
@@ -403,8 +402,7 @@ static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
frame_size, i, j, ret;
int buffer_offset = 0;
- deb_ts("creating %d iso-urbs with %d frames "
- "each of %d bytes size = %d.\n", B2C2_USB_NUM_ISO_URB,
+ deb_ts("creating %d iso-urbs with %d frames each of %d bytes size = %d.\n", B2C2_USB_NUM_ISO_URB,
B2C2_USB_FRAMES_PER_ISO, frame_size, bufsize);
fc_usb->iso_buffer = usb_alloc_coherent(fc_usb->udev,
@@ -429,8 +427,7 @@ static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
int frame_offset = 0;
struct urb *urb = fc_usb->iso_urb[i];
- deb_ts("initializing and submitting urb no. %d "
- "(buf_offset: %d).\n", i, buffer_offset);
+ deb_ts("initializing and submitting urb no. %d (buf_offset: %d).\n", i, buffer_offset);
urb->dev = fc_usb->udev;
urb->context = fc_usb;
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 35/57] [media] cpia2: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (33 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 34/57] [media] b2c2: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 36/57] [media] cx231xx: " Mauro Carvalho Chehab
` (22 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Wolfram Sang,
Hans Verkuil, Greg Kroah-Hartman, Kosuke Tatsukawa
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/usb/cpia2/cpia2_usb.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/media/usb/cpia2/cpia2_usb.c b/drivers/media/usb/cpia2/cpia2_usb.c
index 13620cdf0599..2e03f244c59f 100644
--- a/drivers/media/usb/cpia2/cpia2_usb.c
+++ b/drivers/media/usb/cpia2/cpia2_usb.c
@@ -733,9 +733,7 @@ int cpia2_usb_stream_start(struct camera_data *cam, unsigned int alternate)
cam->params.camera_state.stream_mode = old_alt;
ret2 = set_alternate(cam, USBIF_CMDONLY);
if (ret2 < 0) {
- ERR("cpia2_usb_change_streaming_alternate(%d) =%d has already "
- "failed. Then tried to call "
- "set_alternate(USBIF_CMDONLY) = %d.\n",
+ ERR("cpia2_usb_change_streaming_alternate(%d) =%d has already failed. Then tried to call set_alternate(USBIF_CMDONLY) = %d.\n",
alternate, ret, ret2);
}
} else {
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 36/57] [media] cx231xx: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (34 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 35/57] [media] cpia2: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 37/57] [media] dvb-usb: " Mauro Carvalho Chehab
` (21 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Wolfram Sang,
Hans Verkuil, Terry Heo, Greg Kroah-Hartman, Peter Rosin,
Dan Carpenter, Matthias Schwarzott
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/usb/cx231xx/cx231xx-core.c | 9 +++------
drivers/media/usb/cx231xx/cx231xx-dvb.c | 3 +--
2 files changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/media/usb/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c
index 8b099fe1d592..6bab66d3377e 100644
--- a/drivers/media/usb/cx231xx/cx231xx-core.c
+++ b/drivers/media/usb/cx231xx/cx231xx-core.c
@@ -241,8 +241,7 @@ static int __usb_control_msg(struct cx231xx *dev, unsigned int pipe,
int rc, i;
if (reg_debug) {
- printk(KERN_DEBUG "%s: (pipe 0x%08x): "
- "%s: %02x %02x %02x %02x %02x %02x %02x %02x ",
+ printk(KERN_DEBUG "%s: (pipe 0x%08x): %s: %02x %02x %02x %02x %02x %02x %02x %02x ",
dev->name,
pipe,
(requesttype & USB_DIR_IN) ? "IN" : "OUT",
@@ -441,8 +440,7 @@ int cx231xx_write_ctrl_reg(struct cx231xx *dev, u8 req, u16 reg, char *buf,
if (reg_debug) {
int byte;
- cx231xx_isocdbg("(pipe 0x%08x): "
- "OUT: %02x %02x %02x %02x %02x %02x %02x %02x >>>",
+ cx231xx_isocdbg("(pipe 0x%08x): OUT: %02x %02x %02x %02x %02x %02x %02x %02x >>>",
pipe,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
req, 0, val, reg & 0xff,
@@ -600,8 +598,7 @@ int cx231xx_set_alt_setting(struct cx231xx *dev, u8 index, u8 alt)
return -1;
}
- cx231xx_coredbg("setting alternate %d with wMaxPacketSize=%u,"
- "Interface = %d\n", alt, max_pkt_size,
+ cx231xx_coredbg("setting alternate %d with wMaxPacketSize=%u,Interface = %d\n", alt, max_pkt_size,
usb_interface_index);
if (usb_interface_index > 0) {
diff --git a/drivers/media/usb/cx231xx/cx231xx-dvb.c b/drivers/media/usb/cx231xx/cx231xx-dvb.c
index 1417515d30eb..653ff20b484d 100644
--- a/drivers/media/usb/cx231xx/cx231xx-dvb.c
+++ b/drivers/media/usb/cx231xx/cx231xx-dvb.c
@@ -377,8 +377,7 @@ static int attach_xc5000(u8 addr, struct cx231xx *dev)
cfg.i2c_addr = addr;
if (!dev->dvb->frontend) {
- dev_err(dev->dev, "%s/2: dvb frontend not attached. "
- "Can't attach xc5000\n", dev->name);
+ dev_err(dev->dev, "%s/2: dvb frontend not attached. Can't attach xc5000\n", dev->name);
return -EINVAL;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 37/57] [media] dvb-usb: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (35 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 36/57] [media] cx231xx: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 38/57] [media] dvb-usb-v2: " Mauro Carvalho Chehab
` (20 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Wolfram Sang,
Greg Kroah-Hartman, Kees Cook, Hans Verkuil, Sean Young,
Patrick Boettcher, Alejandro Torrado, Nicolas Sugino,
Javier Martinez Canillas, Sakari Ailus, Dan Carpenter,
Olli Salonen, Jonathan McDowell, Philipp Zabel, Sudip Mukherjee,
Julia Lawall
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/usb/dvb-usb/cinergyT2-core.c | 6 ++----
drivers/media/usb/dvb-usb/dib0700_core.c | 5 +----
drivers/media/usb/dvb-usb/dib0700_devices.c | 3 +--
drivers/media/usb/dvb-usb/dvb-usb-dvb.c | 3 +--
drivers/media/usb/dvb-usb/dvb-usb-firmware.c | 6 ++----
drivers/media/usb/dvb-usb/dw2102.c | 10 ++--------
drivers/media/usb/dvb-usb/friio.c | 3 +--
drivers/media/usb/dvb-usb/gp8psk.c | 3 +--
drivers/media/usb/dvb-usb/opera1.c | 3 +--
drivers/media/usb/dvb-usb/technisat-usb2.c | 3 +--
10 files changed, 13 insertions(+), 32 deletions(-)
diff --git a/drivers/media/usb/dvb-usb/cinergyT2-core.c b/drivers/media/usb/dvb-usb/cinergyT2-core.c
index 9fd1527494eb..f4d9122245ac 100644
--- a/drivers/media/usb/dvb-usb/cinergyT2-core.c
+++ b/drivers/media/usb/dvb-usb/cinergyT2-core.c
@@ -34,8 +34,7 @@
int dvb_usb_cinergyt2_debug;
module_param_named(debug, dvb_usb_cinergyt2_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info, xfer=2, rc=4 "
- "(or-able)).");
+MODULE_PARM_DESC(debug, "set debugging level (1=info, xfer=2, rc=4 (or-able)).");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
@@ -74,8 +73,7 @@ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap)
ret = dvb_usb_generic_rw(adap->dev, query, sizeof(query), state,
sizeof(state), 0);
if (ret < 0) {
- deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep "
- "state info\n");
+ deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep state info\n");
}
/* Copy this pointer as we are gonna need it in the release phase */
diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c
index f3196658fb70..855cfc7bf309 100644
--- a/drivers/media/usb/dvb-usb/dib0700_core.c
+++ b/drivers/media/usb/dvb-usb/dib0700_core.c
@@ -16,10 +16,7 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,2=fw,4=fwdata,8=data (or-ab
static int nb_packet_buffer_size = 21;
module_param(nb_packet_buffer_size, int, 0644);
MODULE_PARM_DESC(nb_packet_buffer_size,
- "Set the dib0700 driver data buffer size. This parameter "
- "corresponds to the number of TS packets. The actual size of "
- "the data buffer corresponds to this parameter "
- "multiplied by 188 (default: 21)");
+ "Set the dib0700 driver data buffer size. This parameter corresponds to the number of TS packets. The actual size of the data buffer corresponds to this parameter multiplied by 188 (default: 21)");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
diff --git a/drivers/media/usb/dvb-usb/dib0700_devices.c b/drivers/media/usb/dvb-usb/dib0700_devices.c
index 0857b56e652c..5668d8d69917 100644
--- a/drivers/media/usb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/usb/dvb-usb/dib0700_devices.c
@@ -26,8 +26,7 @@
static int force_lna_activation;
module_param(force_lna_activation, int, 0644);
-MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), "
- "if applicable for the device (default: 0=automatic/off).");
+MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), if applicable for the device (default: 0=automatic/off).");
struct dib0700_adapter_state {
int (*set_param_save) (struct dvb_frontend *);
diff --git a/drivers/media/usb/dvb-usb/dvb-usb-dvb.c b/drivers/media/usb/dvb-usb/dvb-usb-dvb.c
index a04c0a250625..e5675da286cb 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-dvb.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-dvb.c
@@ -277,8 +277,7 @@ int dvb_usb_adapter_frontend_init(struct dvb_usb_adapter *adap)
for (i = 0; i < adap->props.num_frontends; i++) {
if (adap->props.fe[i].frontend_attach == NULL) {
- err("strange: '%s' #%d,%d "
- "doesn't want to attach a frontend.",
+ err("strange: '%s' #%d,%d doesn't want to attach a frontend.",
adap->dev->desc->name, adap->id, i);
return 0;
diff --git a/drivers/media/usb/dvb-usb/dvb-usb-firmware.c b/drivers/media/usb/dvb-usb/dvb-usb-firmware.c
index dd048a7c461c..f0023dbb7276 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-firmware.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-firmware.c
@@ -49,8 +49,7 @@ int usb_cypress_load_firmware(struct usb_device *udev, const struct firmware *fw
ret = usb_cypress_writemem(udev,hx.addr,hx.data,hx.len);
if (ret != hx.len) {
- err("error while transferring firmware "
- "(transferred size: %d, block size: %d)",
+ err("error while transferring firmware (transferred size: %d, block size: %d)",
ret,hx.len);
ret = -EINVAL;
break;
@@ -81,8 +80,7 @@ int dvb_usb_download_firmware(struct usb_device *udev, struct dvb_usb_device_pro
const struct firmware *fw = NULL;
if ((ret = request_firmware(&fw, props->firmware, &udev->dev)) != 0) {
- err("did not find the firmware file. (%s) "
- "Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)",
+ err("did not find the firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)",
props->firmware,ret);
return ret;
}
diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c
index 5fb0c650926e..008d71905f2e 100644
--- a/drivers/media/usb/dvb-usb/dw2102.c
+++ b/drivers/media/usb/dvb-usb/dw2102.c
@@ -86,8 +86,7 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info 2=xfer 4=rc(or-able))."
/* demod probe */
static int demod_probe = 1;
module_param_named(demod, demod_probe, int, 0644);
-MODULE_PARM_DESC(demod, "demod to probe (1=cx24116 2=stv0903+stv6110 "
- "4=stv0903+stb6100(or-able)).");
+MODULE_PARM_DESC(demod, "demod to probe (1=cx24116 2=stv0903+stv6110 4=stv0903+stb6100(or-able)).");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
@@ -2343,12 +2342,7 @@ static struct usb_driver dw2102_driver = {
module_usb_driver(dw2102_driver);
MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by");
-MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104,"
- " DVB-C 3101 USB2.0,"
- " TeVii S421, S480, S482, S600, S630, S632, S650,"
- " TeVii S660, S662, Prof 1100, 7500 USB2.0,"
- " Geniatech SU3000, T220,"
- " TechnoTrend S2-4600, Terratec Cinergy S2 devices");
+MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104, DVB-C 3101 USB2.0, TeVii S421, S480, S482, S600, S630, S632, S650, TeVii S660, S662, Prof 1100, 7500 USB2.0, Geniatech SU3000, T220, TechnoTrend S2-4600, Terratec Cinergy S2 devices");
MODULE_VERSION("0.1");
MODULE_LICENSE("GPL");
MODULE_FIRMWARE(DW2101_FIRMWARE);
diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c
index 474a17e4db0c..4ab0b04234cd 100644
--- a/drivers/media/usb/dvb-usb/friio.c
+++ b/drivers/media/usb/dvb-usb/friio.c
@@ -320,8 +320,7 @@ static int friio_initialize(struct dvb_usb_device *d)
*/
if (rbuf[0] & 0x80) { /* still in PowerOnReset state? */
if (++retry > 3) {
- deb_info("failed to get the correct"
- " FE demod status:0x%02x\n", rbuf[0]);
+ deb_info("failed to get the correct FE demod status:0x%02x\n", rbuf[0]);
goto error;
}
msleep(100);
diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c
index 5d0384dd45b5..1587dc7c4eb3 100644
--- a/drivers/media/usb/dvb-usb/gp8psk.c
+++ b/drivers/media/usb/dvb-usb/gp8psk.c
@@ -117,8 +117,7 @@ static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d)
u8 *buf;
if ((ret = request_firmware(&fw, bcm4500_firmware,
&d->udev->dev)) != 0) {
- err("did not find the bcm4500 firmware file. (%s) "
- "Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)",
+ err("did not find the bcm4500 firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)",
bcm4500_firmware,ret);
return ret;
}
diff --git a/drivers/media/usb/dvb-usb/opera1.c b/drivers/media/usb/dvb-usb/opera1.c
index 2566d2f1c2ad..946a5ccc8f1a 100644
--- a/drivers/media/usb/dvb-usb/opera1.c
+++ b/drivers/media/usb/dvb-usb/opera1.c
@@ -453,8 +453,7 @@ static int opera1_xilinx_load_firmware(struct usb_device *dev,
info("start downloading fpga firmware %s",filename);
if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) {
- err("did not find the firmware file. (%s) "
- "Please see linux/Documentation/dvb/ for more details on firmware-problems.",
+ err("did not find the firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems.",
filename);
return ret;
} else {
diff --git a/drivers/media/usb/dvb-usb/technisat-usb2.c b/drivers/media/usb/dvb-usb/technisat-usb2.c
index d9f3262bf071..fbfcabc52f76 100644
--- a/drivers/media/usb/dvb-usb/technisat-usb2.c
+++ b/drivers/media/usb/dvb-usb/technisat-usb2.c
@@ -50,8 +50,7 @@ MODULE_PARM_DESC(debug,
static int disable_led_control;
module_param(disable_led_control, int, 0444);
MODULE_PARM_DESC(disable_led_control,
- "disable LED control of the device "
- "(default: 0 - LED control is active).");
+ "disable LED control of the device (default: 0 - LED control is active).");
/* device private data */
struct technisat_usb2_state {
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 38/57] [media] dvb-usb-v2: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (36 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 37/57] [media] dvb-usb: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 39/57] [media] em28xx: " Mauro Carvalho Chehab
` (19 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Michael Krufky, Mauro Carvalho Chehab
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c | 10 +++-------
drivers/media/usb/dvb-usb-v2/mxl111sf.c | 9 +++------
2 files changed, 6 insertions(+), 13 deletions(-)
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c b/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c
index 283495c84ba3..ea39056412c5 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c
@@ -666,8 +666,7 @@ static int mxl111sf_i2c_hw_xfer_msg(struct mxl111sf_state *state,
if (rd_status[i] == 0x04) {
if (i < 7) {
- mxl_i2c("i2c fifo empty!"
- " @ %d", i);
+ mxl_i2c("i2c fifo empty! @ %d", i);
msg->buf[(index*8)+i] =
i2c_r_data[(i*3)+1];
/* read again */
@@ -692,8 +691,7 @@ static int mxl111sf_i2c_hw_xfer_msg(struct mxl111sf_state *state,
}
goto stop_copy;
} else {
- mxl_i2c("readagain "
- "ERROR!");
+ mxl_i2c("readagain ERROR!");
}
} else {
msg->buf[(index*8)+i] =
@@ -827,9 +825,7 @@ int mxl111sf_i2c_xfer(struct i2c_adapter *adap,
mxl111sf_i2c_hw_xfer_msg(state, &msg[i]) :
mxl111sf_i2c_sw_xfer_msg(state, &msg[i]);
if (mxl_fail(ret)) {
- mxl_debug_adv("failed with error %d on i2c "
- "transaction %d of %d, %sing %d bytes "
- "to/from 0x%02x", ret, i+1, num,
+ mxl_debug_adv("failed with error %d on i2c transaction %d of %d, %sing %d bytes to/from 0x%02x", ret, i+1, num,
(msg[i].flags & I2C_M_RD) ?
"read" : "writ",
msg[i].len, msg[i].addr);
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.c b/drivers/media/usb/dvb-usb-v2/mxl111sf.c
index 5d676b533a3a..58da619b7c59 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf.c
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c
@@ -29,8 +29,7 @@
int dvb_usb_mxl111sf_debug;
module_param_named(debug, dvb_usb_mxl111sf_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level "
- "(1=info, 2=xfer, 4=i2c, 8=reg, 16=adv (or-able)).");
+MODULE_PARM_DESC(debug, "set debugging level (1=info, 2=xfer, 4=i2c, 8=reg, 16=adv (or-able)).");
static int dvb_usb_mxl111sf_isoc;
module_param_named(isoc, dvb_usb_mxl111sf_isoc, int, 0644);
@@ -137,8 +136,7 @@ int mxl111sf_write_reg_mask(struct mxl111sf_state *state,
#if 1
/* dont know why this usually errors out on the first try */
if (mxl_fail(ret))
- pr_err("error writing addr: 0x%02x, mask: 0x%02x, "
- "data: 0x%02x, retrying...", addr, mask, data);
+ pr_err("error writing addr: 0x%02x, mask: 0x%02x, data: 0x%02x, retrying...", addr, mask, data);
ret = mxl111sf_read_reg(state, addr, &val);
#endif
@@ -946,8 +944,7 @@ static int mxl111sf_init(struct dvb_usb_device *d)
case 138001:
break;
default:
- printk(KERN_WARNING "%s: warning: "
- "unknown hauppauge model #%d\n",
+ printk(KERN_WARNING "%s: warning: unknown hauppauge model #%d\n",
__func__, state->tv.model);
}
#endif
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 39/57] [media] em28xx: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (37 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 38/57] [media] dvb-usb-v2: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 40/57] [media] hdpvr: " Mauro Carvalho Chehab
` (18 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/usb/em28xx/em28xx-cards.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index bcd6ac61d9f8..fd11084de447 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -1561,8 +1561,7 @@ struct em28xx_board em28xx_boards[] = {
} },
},
[EM2820_BOARD_PINNACLE_DVC_90] = {
- .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker "
- "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U",
+ .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U",
.tuner_type = TUNER_ABSENT, /* capture only board */
.decoder = EM28XX_SAA711X,
.input = { {
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 40/57] [media] hdpvr: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (38 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 39/57] [media] em28xx: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 41/57] [media] pvrusb2: " Mauro Carvalho Chehab
` (17 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Hans Verkuil, Mauro Carvalho Chehab,
Arnd Bergmann, Bhaktipriya Shridhar, Tejun Heo, Sean Young,
Julia Lawall, Wolfram Sang, Greg Kroah-Hartman, Markus Elfring
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/usb/hdpvr/hdpvr-core.c | 9 +++------
drivers/media/usb/hdpvr/hdpvr-i2c.c | 6 ++----
drivers/media/usb/hdpvr/hdpvr-video.c | 4 +---
3 files changed, 6 insertions(+), 13 deletions(-)
diff --git a/drivers/media/usb/hdpvr/hdpvr-core.c b/drivers/media/usb/hdpvr/hdpvr-core.c
index a61d8fd63c12..15f016ad5b89 100644
--- a/drivers/media/usb/hdpvr/hdpvr-core.c
+++ b/drivers/media/usb/hdpvr/hdpvr-core.c
@@ -41,13 +41,11 @@ MODULE_PARM_DESC(hdpvr_debug, "enable debugging output");
static uint default_video_input = HDPVR_VIDEO_INPUTS;
module_param(default_video_input, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(default_video_input, "default video input: 0=Component / "
- "1=S-Video / 2=Composite");
+MODULE_PARM_DESC(default_video_input, "default video input: 0=Component / 1=S-Video / 2=Composite");
static uint default_audio_input = HDPVR_AUDIO_INPUTS;
module_param(default_audio_input, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(default_audio_input, "default audio input: 0=RCA back / "
- "1=RCA front / 2=S/PDIF");
+MODULE_PARM_DESC(default_audio_input, "default audio input: 0=RCA back / 1=RCA front / 2=S/PDIF");
static bool boost_audio;
module_param(boost_audio, bool, S_IRUGO|S_IWUSR);
@@ -165,8 +163,7 @@ static int device_authorization(struct hdpvr_device *dev)
dev->flags |= HDPVR_FLAG_AC3_CAP;
break;
default:
- v4l2_info(&dev->v4l2_dev, "untested firmware, the driver might"
- " not work.\n");
+ v4l2_info(&dev->v4l2_dev, "untested firmware, the driver might not work.\n");
if (dev->fw_ver >= HDPVR_FIRMWARE_VERSION_AC3)
dev->flags |= HDPVR_FLAG_AC3_CAP;
else
diff --git a/drivers/media/usb/hdpvr/hdpvr-i2c.c b/drivers/media/usb/hdpvr/hdpvr-i2c.c
index 9b641c4d4431..db750e7da323 100644
--- a/drivers/media/usb/hdpvr/hdpvr-i2c.c
+++ b/drivers/media/usb/hdpvr/hdpvr-i2c.c
@@ -145,15 +145,13 @@ static int hdpvr_transfer(struct i2c_adapter *i2c_adapter, struct i2c_msg *msgs,
msgs[0].len);
} else if (num == 2) {
if (msgs[0].addr != msgs[1].addr) {
- v4l2_warn(&dev->v4l2_dev, "refusing 2-phase i2c xfer "
- "with conflicting target addresses\n");
+ v4l2_warn(&dev->v4l2_dev, "refusing 2-phase i2c xfer with conflicting target addresses\n");
retval = -EINVAL;
goto out;
}
if ((msgs[0].flags & I2C_M_RD) || !(msgs[1].flags & I2C_M_RD)) {
- v4l2_warn(&dev->v4l2_dev, "refusing complex xfer with "
- "r0=%d, r1=%d\n", msgs[0].flags & I2C_M_RD,
+ v4l2_warn(&dev->v4l2_dev, "refusing complex xfer with r0=%d, r1=%d\n", msgs[0].flags & I2C_M_RD,
msgs[1].flags & I2C_M_RD);
retval = -EINVAL;
goto out;
diff --git a/drivers/media/usb/hdpvr/hdpvr-video.c b/drivers/media/usb/hdpvr/hdpvr-video.c
index 6d43d75493ea..a247063c5816 100644
--- a/drivers/media/usb/hdpvr/hdpvr-video.c
+++ b/drivers/media/usb/hdpvr/hdpvr-video.c
@@ -337,9 +337,7 @@ static int hdpvr_stop_streaming(struct hdpvr_device *dev)
buf = kmalloc(dev->bulk_in_size, GFP_KERNEL);
if (!buf)
- v4l2_err(&dev->v4l2_dev, "failed to allocate temporary buffer "
- "for emptying the internal device buffer. "
- "Next capture start will be slow\n");
+ v4l2_err(&dev->v4l2_dev, "failed to allocate temporary buffer for emptying the internal device buffer. Next capture start will be slow\n");
dev->status = STATUS_SHUTTING_DOWN;
hdpvr_config_call(dev, CTRL_STOP_STREAMING_VALUE, 0x00);
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 41/57] [media] pvrusb2: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (39 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 40/57] [media] hdpvr: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 42/57] [media] pwc: " Mauro Carvalho Chehab
` (16 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mike Isely, Mauro Carvalho Chehab
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/usb/pvrusb2/pvrusb2-audio.c | 4 +-
drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.c | 4 +-
drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c | 4 +-
drivers/media/usb/pvrusb2/pvrusb2-debugifc.c | 4 +-
drivers/media/usb/pvrusb2/pvrusb2-eeprom.c | 6 +-
drivers/media/usb/pvrusb2/pvrusb2-encoder.c | 28 +---
drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 175 +++++++-----------------
drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c | 33 ++---
drivers/media/usb/pvrusb2/pvrusb2-io.c | 33 ++---
drivers/media/usb/pvrusb2/pvrusb2-ioread.c | 33 ++---
drivers/media/usb/pvrusb2/pvrusb2-std.c | 3 +-
drivers/media/usb/pvrusb2/pvrusb2-v4l2.c | 9 +-
drivers/media/usb/pvrusb2/pvrusb2-video-v4l.c | 4 +-
drivers/media/usb/pvrusb2/pvrusb2-wm8775.c | 3 +-
14 files changed, 104 insertions(+), 239 deletions(-)
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-audio.c b/drivers/media/usb/pvrusb2/pvrusb2-audio.c
index 5f953d837bf1..3bac50a248d4 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-audio.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-audio.c
@@ -74,9 +74,7 @@ void pvr2_msp3400_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
input = sp->def[hdw->input_val];
} else {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "*** WARNING *** subdev msp3400 set_input:"
- " Invalid routing scheme (%u)"
- " and/or input (%d)",
+ "*** WARNING *** subdev msp3400 set_input: Invalid routing scheme (%u) and/or input (%d)",
sid, hdw->input_val);
return;
}
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.c b/drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.c
index f82f0f0f2c04..7f29a0464f36 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.c
@@ -72,9 +72,7 @@ void pvr2_cs53l32a_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
(hdw->input_val < 0) ||
(hdw->input_val >= sp->cnt)) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "*** WARNING *** subdev v4l2 set_input:"
- " Invalid routing scheme (%u)"
- " and/or input (%d)",
+ "*** WARNING *** subdev v4l2 set_input: Invalid routing scheme (%u) and/or input (%d)",
sid, hdw->input_val);
return;
}
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c b/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c
index 7d675fae1846..30eef97ef2ef 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c
@@ -137,9 +137,7 @@ void pvr2_cx25840_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
(hdw->input_val < 0) ||
(hdw->input_val >= sp->cnt)) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "*** WARNING *** subdev cx2584x set_input:"
- " Invalid routing scheme (%u)"
- " and/or input (%d)",
+ "*** WARNING *** subdev cx2584x set_input: Invalid routing scheme (%u) and/or input (%d)",
sid, hdw->input_val);
return;
}
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-debugifc.c b/drivers/media/usb/pvrusb2/pvrusb2-debugifc.c
index e4022bcb155b..58ec706ebdb3 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-debugifc.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-debugifc.c
@@ -176,9 +176,7 @@ int pvr2_debugifc_print_status(struct pvr2_hdw *hdw,
pvr2_stream_get_stats(sp, &stats, 0);
ccnt = scnprintf(
buf,acnt,
- "Bytes streamed=%u"
- " URBs: queued=%u idle=%u ready=%u"
- " processed=%u failed=%u\n",
+ "Bytes streamed=%u URBs: queued=%u idle=%u ready=%u processed=%u failed=%u\n",
stats.bytes_processed,
stats.buffers_in_queue,
stats.buffers_in_idle,
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-eeprom.c b/drivers/media/usb/pvrusb2/pvrusb2-eeprom.c
index e1907cd0c3b7..14ef4ae907c4 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-eeprom.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-eeprom.c
@@ -56,8 +56,7 @@ static u8 *pvr2_eeprom_fetch(struct pvr2_hdw *hdw)
eeprom = kmalloc(EEPROM_SIZE,GFP_KERNEL);
if (!eeprom) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Failed to allocate memory"
- " required to read eeprom");
+ "Failed to allocate memory required to read eeprom");
return NULL;
}
@@ -74,8 +73,7 @@ static u8 *pvr2_eeprom_fetch(struct pvr2_hdw *hdw)
strange but it's what they do) */
mode16 = (addr & 1);
eepromSize = (mode16 ? 4096 : 256);
- trace_eeprom("Examining %d byte eeprom at location 0x%x"
- " using %d bit addressing",eepromSize,addr,
+ trace_eeprom("Examining %d byte eeprom at location 0x%x using %d bit addressing",eepromSize,addr,
mode16 ? 16 : 8);
msg[0].addr = addr;
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-encoder.c b/drivers/media/usb/pvrusb2/pvrusb2-encoder.c
index 593b3e9b6bfd..651d1dda3b66 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-encoder.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-encoder.c
@@ -188,9 +188,7 @@ static int pvr2_encoder_cmd(void *ctxt,
if (arg_cnt_send > (ARRAY_SIZE(wrData) - 4)) {
pvr2_trace(
PVR2_TRACE_ERROR_LEGS,
- "Failed to write cx23416 command"
- " - too many input arguments"
- " (was given %u limit %lu)",
+ "Failed to write cx23416 command - too many input arguments (was given %u limit %lu)",
arg_cnt_send, (long unsigned) ARRAY_SIZE(wrData) - 4);
return -EINVAL;
}
@@ -198,9 +196,7 @@ static int pvr2_encoder_cmd(void *ctxt,
if (arg_cnt_recv > (ARRAY_SIZE(rdData) - 4)) {
pvr2_trace(
PVR2_TRACE_ERROR_LEGS,
- "Failed to write cx23416 command"
- " - too many return arguments"
- " (was given %u limit %lu)",
+ "Failed to write cx23416 command - too many return arguments (was given %u limit %lu)",
arg_cnt_recv, (long unsigned) ARRAY_SIZE(rdData) - 4);
return -EINVAL;
}
@@ -248,14 +244,11 @@ static int pvr2_encoder_cmd(void *ctxt,
retry_flag = !0;
pvr2_trace(
PVR2_TRACE_ERROR_LEGS,
- "Encoder timed out waiting for us"
- "; arranging to retry");
+ "Encoder timed out waiting for us; arranging to retry");
} else {
pvr2_trace(
PVR2_TRACE_ERROR_LEGS,
- "***WARNING*** device's encoder"
- " appears to be stuck"
- " (status=0x%08x)",rdData[0]);
+ "***WARNING*** device's encoder appears to be stuck (status=0x%08x)",rdData[0]);
}
pvr2_trace(
PVR2_TRACE_ERROR_LEGS,
@@ -293,11 +286,7 @@ static int pvr2_encoder_cmd(void *ctxt,
}
pvr2_trace(
PVR2_TRACE_ERROR_LEGS,
- "Giving up on command."
- " This is normally recovered via a firmware"
- " reload and re-initialization; concern"
- " is only warranted if this happens repeatedly"
- " and rapidly.");
+ "Giving up on command. This is normally recovered via a firmware reload and re-initialization; concern is only warranted if this happens repeatedly and rapidly.");
break;
}
wrData[0] = 0x7;
@@ -325,9 +314,7 @@ static int pvr2_encoder_vcmd(struct pvr2_hdw *hdw, int cmd,
if (args > ARRAY_SIZE(data)) {
pvr2_trace(
PVR2_TRACE_ERROR_LEGS,
- "Failed to write cx23416 command"
- " - too many arguments"
- " (was given %u limit %lu)",
+ "Failed to write cx23416 command - too many arguments (was given %u limit %lu)",
args, (long unsigned) ARRAY_SIZE(data));
return -EINVAL;
}
@@ -433,8 +420,7 @@ int pvr2_encoder_configure(struct pvr2_hdw *hdw)
{
int ret;
int val;
- pvr2_trace(PVR2_TRACE_ENCODER,"pvr2_encoder_configure"
- " (cx2341x module)");
+ pvr2_trace(PVR2_TRACE_ENCODER,"pvr2_encoder_configure (cx2341x module)");
hdw->enc_ctl_state.port = CX2341X_PORT_STREAMING;
hdw->enc_ctl_state.width = hdw->res_hor_val;
hdw->enc_ctl_state.height = hdw->res_ver_val;
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
index 1eb4f7ba2967..4c24843cdf12 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
@@ -1371,8 +1371,7 @@ static int pvr2_locate_firmware(struct pvr2_hdw *hdw,
fwnames[idx],
&hdw->usb_dev->dev);
if (!ret) {
- trace_firmware("Located %s firmware: %s;"
- " uploading...",
+ trace_firmware("Located %s firmware: %s; uploading...",
fwtypename,
fwnames[idx]);
return idx;
@@ -1383,21 +1382,17 @@ static int pvr2_locate_firmware(struct pvr2_hdw *hdw,
return ret;
}
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "***WARNING***"
- " Device %s firmware"
- " seems to be missing.",
+ "***WARNING*** Device %s firmware seems to be missing.",
fwtypename);
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Did you install the pvrusb2 firmware files"
- " in their proper location?");
+ "Did you install the pvrusb2 firmware files in their proper location?");
if (fwcount == 1) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
"request_firmware unable to locate %s file %s",
fwtypename,fwnames[0]);
} else {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "request_firmware unable to locate"
- " one of the following %s files:",
+ "request_firmware unable to locate one of the following %s files:",
fwtypename);
for (idx = 0; idx < fwcount; idx++) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
@@ -1431,8 +1426,7 @@ static int pvr2_upload_firmware1(struct pvr2_hdw *hdw)
if (!hdw->hdw_desc->fx2_firmware.cnt) {
hdw->fw1_state = FW1_STATE_OK;
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Connected device type defines"
- " no firmware to upload; ignoring firmware");
+ "Connected device type defines no firmware to upload; ignoring firmware");
return -ENOTTY;
}
@@ -1457,13 +1451,11 @@ static int pvr2_upload_firmware1(struct pvr2_hdw *hdw)
(!(hdw->hdw_desc->flag_fx2_16kb && (fwsize == 0x4000)))) {
if (hdw->hdw_desc->flag_fx2_16kb) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Wrong fx2 firmware size"
- " (expected 8192 or 16384, got %u)",
+ "Wrong fx2 firmware size (expected 8192 or 16384, got %u)",
fwsize);
} else {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Wrong fx2 firmware size"
- " (expected 8192, got %u)",
+ "Wrong fx2 firmware size (expected 8192, got %u)",
fwsize);
}
release_firmware(fw_entry);
@@ -1585,8 +1577,7 @@ int pvr2_upload_firmware2(struct pvr2_hdw *hdw)
if (fw_len % sizeof(u32)) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "size of %s firmware"
- " must be a multiple of %zu bytes",
+ "size of %s firmware must be a multiple of %zu bytes",
fw_files[fwidx],sizeof(u32));
release_firmware(fw_entry);
ret = -EINVAL;
@@ -1887,8 +1878,7 @@ static void pvr2_hdw_setup_std(struct pvr2_hdw *hdw)
bcnt = pvr2_std_id_to_str(buf,sizeof(buf),hdw->std_mask_eeprom);
pvr2_trace(PVR2_TRACE_STD,
- "Supported video standard(s) reported available"
- " in hardware: %.*s",
+ "Supported video standard(s) reported available in hardware: %.*s",
bcnt,buf);
hdw->std_mask_avail = hdw->std_mask_eeprom;
@@ -1897,8 +1887,7 @@ static void pvr2_hdw_setup_std(struct pvr2_hdw *hdw)
if (std2) {
bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std2);
pvr2_trace(PVR2_TRACE_STD,
- "Expanding supported video standards"
- " to include: %.*s",
+ "Expanding supported video standards to include: %.*s",
bcnt,buf);
hdw->std_mask_avail |= std2;
}
@@ -1917,8 +1906,7 @@ static void pvr2_hdw_setup_std(struct pvr2_hdw *hdw)
if (std3) {
bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std3);
pvr2_trace(PVR2_TRACE_STD,
- "Initial video standard"
- " (determined by device type): %.*s",bcnt,buf);
+ "Initial video standard (determined by device type): %.*s",bcnt,buf);
hdw->std_mask_cur = std3;
hdw->std_dirty = !0;
return;
@@ -1980,8 +1968,7 @@ static void pvr2_hdw_cx25840_vbi_hack(struct pvr2_hdw *hdw)
}
pvr2_trace(PVR2_TRACE_INIT,
- "Module ID %u:"
- " Executing cx25840 VBI hack",
+ "Module ID %u: Executing cx25840 VBI hack",
hdw->decoder_client_id);
memset(&fmt, 0, sizeof(fmt));
fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE;
@@ -2007,8 +1994,7 @@ static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw,
fname = (mid < ARRAY_SIZE(module_names)) ? module_names[mid] : NULL;
if (!fname) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Module ID %u for device %s has no name?"
- " The driver might have a configuration problem.",
+ "Module ID %u for device %s has no name? The driver might have a configuration problem.",
mid,
hdw->hdw_desc->description);
return -EINVAL;
@@ -2027,32 +2013,27 @@ static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw,
ARRAY_SIZE(i2caddr));
if (i2ccnt) {
pvr2_trace(PVR2_TRACE_INIT,
- "Module ID %u:"
- " Using default i2c address list",
+ "Module ID %u: Using default i2c address list",
mid);
}
}
if (!i2ccnt) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Module ID %u (%s) for device %s:"
- " No i2c addresses."
- " The driver might have a configuration problem.",
+ "Module ID %u (%s) for device %s: No i2c addresses. The driver might have a configuration problem.",
mid, fname, hdw->hdw_desc->description);
return -EINVAL;
}
if (i2ccnt == 1) {
pvr2_trace(PVR2_TRACE_INIT,
- "Module ID %u:"
- " Setting up with specified i2c address 0x%x",
+ "Module ID %u: Setting up with specified i2c address 0x%x",
mid, i2caddr[0]);
sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
fname, i2caddr[0], NULL);
} else {
pvr2_trace(PVR2_TRACE_INIT,
- "Module ID %u:"
- " Setting up with address probe list",
+ "Module ID %u: Setting up with address probe list",
mid);
sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
fname, 0, i2caddr);
@@ -2060,9 +2041,7 @@ static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw,
if (!sd) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Module ID %u (%s) for device %s failed to load."
- " Possible missing sub-device kernel module or"
- " initialization failure within module.",
+ "Module ID %u (%s) for device %s failed to load. Possible missing sub-device kernel module or initialization failure within module.",
mid, fname, hdw->hdw_desc->description);
return -EIO;
}
@@ -2124,18 +2103,14 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw)
== 0);
if (reloadFl) {
pvr2_trace(PVR2_TRACE_INIT,
- "USB endpoint config looks strange"
- "; possibly firmware needs to be"
- " loaded");
+ "USB endpoint config looks strange; possibly firmware needs to be loaded");
}
}
if (!reloadFl) {
reloadFl = !pvr2_hdw_check_firmware(hdw);
if (reloadFl) {
pvr2_trace(PVR2_TRACE_INIT,
- "Check for FX2 firmware failed"
- "; possibly firmware needs to be"
- " loaded");
+ "Check for FX2 firmware failed; possibly firmware needs to be loaded");
}
}
if (reloadFl) {
@@ -2200,8 +2175,7 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw)
if (!pvr2_hdw_dev_ok(hdw)) return;
if (ret < 0) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Unable to determine location of eeprom,"
- " skipping");
+ "Unable to determine location of eeprom, skipping");
} else {
hdw->eeprom_addr = ret;
pvr2_eeprom_analyze(hdw);
@@ -2254,8 +2228,7 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw)
idx = get_default_error_tolerance(hdw);
if (idx) {
pvr2_trace(PVR2_TRACE_INIT,
- "pvr2_hdw_setup: video stream %p"
- " setting tolerance %u",
+ "pvr2_hdw_setup: video stream %p setting tolerance %u",
hdw->vid_stream,idx);
}
pvr2_stream_setup(hdw->vid_stream,hdw->usb_dev,
@@ -2285,16 +2258,13 @@ static void pvr2_hdw_setup(struct pvr2_hdw *hdw)
if (hdw->flag_init_ok) {
pvr2_trace(
PVR2_TRACE_INFO,
- "Device initialization"
- " completed successfully.");
+ "Device initialization completed successfully.");
break;
}
if (hdw->fw1_state == FW1_STATE_RELOAD) {
pvr2_trace(
PVR2_TRACE_INFO,
- "Device microcontroller firmware"
- " (re)loaded; it should now reset"
- " and reconnect.");
+ "Device microcontroller firmware (re)loaded; it should now reset and reconnect.");
break;
}
pvr2_trace(
@@ -2303,48 +2273,35 @@ static void pvr2_hdw_setup(struct pvr2_hdw *hdw)
if (hdw->fw1_state == FW1_STATE_MISSING) {
pvr2_trace(
PVR2_TRACE_ERROR_LEGS,
- "Giving up since device"
- " microcontroller firmware"
- " appears to be missing.");
+ "Giving up since device microcontroller firmware appears to be missing.");
break;
}
}
if (hdw->flag_modulefail) {
pvr2_trace(
PVR2_TRACE_ERROR_LEGS,
- "***WARNING*** pvrusb2 driver initialization"
- " failed due to the failure of one or more"
- " sub-device kernel modules.");
+ "***WARNING*** pvrusb2 driver initialization failed due to the failure of one or more sub-device kernel modules.");
pvr2_trace(
PVR2_TRACE_ERROR_LEGS,
- "You need to resolve the failing condition"
- " before this driver can function. There"
- " should be some earlier messages giving more"
- " information about the problem.");
+ "You need to resolve the failing condition before this driver can function. There should be some earlier messages giving more information about the problem.");
break;
}
if (procreload) {
pvr2_trace(
PVR2_TRACE_ERROR_LEGS,
- "Attempting pvrusb2 recovery by reloading"
- " primary firmware.");
+ "Attempting pvrusb2 recovery by reloading primary firmware.");
pvr2_trace(
PVR2_TRACE_ERROR_LEGS,
- "If this works, device should disconnect"
- " and reconnect in a sane state.");
+ "If this works, device should disconnect and reconnect in a sane state.");
hdw->fw1_state = FW1_STATE_UNKNOWN;
pvr2_upload_firmware1(hdw);
} else {
pvr2_trace(
PVR2_TRACE_ERROR_LEGS,
- "***WARNING*** pvrusb2 device hardware"
- " appears to be jammed"
- " and I can't clear it.");
+ "***WARNING*** pvrusb2 device hardware appears to be jammed and I can't clear it.");
pvr2_trace(
PVR2_TRACE_ERROR_LEGS,
- "You might need to power cycle"
- " the pvrusb2 device"
- " in order to recover.");
+ "You might need to power cycle the pvrusb2 device in order to recover.");
}
} while (0);
pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_setup(hdw=%p) end",hdw);
@@ -2396,12 +2353,8 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf,
hdw_desc = (const struct pvr2_device_desc *)(devid->driver_info);
if (hdw_desc == NULL) {
- pvr2_trace(PVR2_TRACE_INIT, "pvr2_hdw_create:"
- " No device description pointer,"
- " unable to continue.");
- pvr2_trace(PVR2_TRACE_INIT, "If you have a new device type,"
- " please contact Mike Isely <isely@pobox.com>"
- " to get it included in the driver\n");
+ pvr2_trace(PVR2_TRACE_INIT, "pvr2_hdw_create: No device description pointer, unable to continue.");
+ pvr2_trace(PVR2_TRACE_INIT, "If you have a new device type, please contact Mike Isely <isely@pobox.com> to get it included in the driver\n");
goto fail;
}
@@ -2413,14 +2366,11 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf,
if (hdw_desc->flag_is_experimental) {
pvr2_trace(PVR2_TRACE_INFO, "**********");
pvr2_trace(PVR2_TRACE_INFO,
- "WARNING: Support for this device (%s) is"
- " experimental.", hdw_desc->description);
+ "WARNING: Support for this device (%s) is experimental.", hdw_desc->description);
pvr2_trace(PVR2_TRACE_INFO,
- "Important functionality might not be"
- " entirely working.");
+ "Important functionality might not be entirely working.");
pvr2_trace(PVR2_TRACE_INFO,
- "Please consider contacting the driver author to"
- " help with further stabilization of the driver.");
+ "Please consider contacting the driver author to help with further stabilization of the driver.");
pvr2_trace(PVR2_TRACE_INFO, "**********");
}
if (!hdw) goto fail;
@@ -3375,8 +3325,7 @@ static u8 *pvr2_full_eeprom_fetch(struct pvr2_hdw *hdw)
eeprom = kmalloc(EEPROM_SIZE,GFP_KERNEL);
if (!eeprom) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Failed to allocate memory"
- " required to read eeprom");
+ "Failed to allocate memory required to read eeprom");
return NULL;
}
@@ -3393,8 +3342,7 @@ static u8 *pvr2_full_eeprom_fetch(struct pvr2_hdw *hdw)
strange but it's what they do) */
mode16 = (addr & 1);
eepromSize = (mode16 ? EEPROM_SIZE : 256);
- trace_eeprom("Examining %d byte eeprom at location 0x%x"
- " using %d bit addressing",eepromSize,addr,
+ trace_eeprom("Examining %d byte eeprom at location 0x%x using %d bit addressing",eepromSize,addr,
mode16 ? 16 : 8);
msg[0].addr = addr;
@@ -3461,8 +3409,7 @@ void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *hdw,
if (hdw->fw_cpu_flag) {
hdw->fw_size = (mode == 1) ? 0x4000 : 0x2000;
pvr2_trace(PVR2_TRACE_FIRMWARE,
- "Preparing to suck out CPU firmware"
- " (size=%u)", hdw->fw_size);
+ "Preparing to suck out CPU firmware (size=%u)", hdw->fw_size);
hdw->fw_buffer = kzalloc(hdw->fw_size,GFP_KERNEL);
if (!hdw->fw_buffer) {
hdw->fw_size = 0;
@@ -3620,21 +3567,18 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw,
struct timer_list timer;
if (!hdw->ctl_lock_held) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Attempted to execute control transfer"
- " without lock!!");
+ "Attempted to execute control transfer without lock!!");
return -EDEADLK;
}
if (!hdw->flag_ok && !probe_fl) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Attempted to execute control transfer"
- " when device not ok");
+ "Attempted to execute control transfer when device not ok");
return -EIO;
}
if (!(hdw->ctl_read_urb && hdw->ctl_write_urb)) {
if (!probe_fl) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Attempted to execute control transfer"
- " when USB is disconnected");
+ "Attempted to execute control transfer when USB is disconnected");
}
return -ENOTTY;
}
@@ -3645,16 +3589,14 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw,
if (write_len > PVR2_CTL_BUFFSIZE) {
pvr2_trace(
PVR2_TRACE_ERROR_LEGS,
- "Attempted to execute %d byte"
- " control-write transfer (limit=%d)",
+ "Attempted to execute %d byte control-write transfer (limit=%d)",
write_len,PVR2_CTL_BUFFSIZE);
return -EINVAL;
}
if (read_len > PVR2_CTL_BUFFSIZE) {
pvr2_trace(
PVR2_TRACE_ERROR_LEGS,
- "Attempted to execute %d byte"
- " control-read transfer (limit=%d)",
+ "Attempted to execute %d byte control-read transfer (limit=%d)",
write_len,PVR2_CTL_BUFFSIZE);
return -EINVAL;
}
@@ -3703,8 +3645,7 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw,
status = usb_submit_urb(hdw->ctl_write_urb,GFP_KERNEL);
if (status < 0) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Failed to submit write-control"
- " URB status=%d",status);
+ "Failed to submit write-control URB status=%d",status);
hdw->ctl_write_pend_flag = 0;
goto done;
}
@@ -3727,8 +3668,7 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw,
status = usb_submit_urb(hdw->ctl_read_urb,GFP_KERNEL);
if (status < 0) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Failed to submit read-control"
- " URB status=%d",status);
+ "Failed to submit read-control URB status=%d",status);
hdw->ctl_read_pend_flag = 0;
goto done;
}
@@ -3770,8 +3710,7 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw,
status = hdw->ctl_write_urb->status;
if (!probe_fl) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "control-write URB failure,"
- " status=%d",
+ "control-write URB failure, status=%d",
status);
}
goto done;
@@ -3781,8 +3720,7 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw,
status = -EIO;
if (!probe_fl) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "control-write URB short,"
- " expected=%d got=%d",
+ "control-write URB short, expected=%d got=%d",
write_len,
hdw->ctl_write_urb->actual_length);
}
@@ -3800,8 +3738,7 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw,
status = hdw->ctl_read_urb->status;
if (!probe_fl) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "control-read URB failure,"
- " status=%d",
+ "control-read URB failure, status=%d",
status);
}
goto done;
@@ -3811,8 +3748,7 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw,
status = -EIO;
if (!probe_fl) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "control-read URB short,"
- " expected=%d got=%d",
+ "control-read URB short, expected=%d got=%d",
read_len,
hdw->ctl_read_urb->actual_length);
}
@@ -4799,9 +4735,7 @@ static unsigned int pvr2_hdw_report_unlocked(struct pvr2_hdw *hdw,int which,
0);
return scnprintf(
buf,acnt,
- "Bytes streamed=%u"
- " URBs: queued=%u idle=%u ready=%u"
- " processed=%u failed=%u",
+ "Bytes streamed=%u URBs: queued=%u idle=%u ready=%u processed=%u failed=%u",
stats.bytes_processed,
stats.buffers_in_queue,
stats.buffers_in_idle,
@@ -5013,8 +4947,7 @@ int pvr2_hdw_gpio_chg_dir(struct pvr2_hdw *hdw,u32 msk,u32 val)
if (ret) return ret;
nval = (cval & ~msk) | (val & msk);
pvr2_trace(PVR2_TRACE_GPIO,
- "GPIO direction changing 0x%x:0x%x"
- " from 0x%x to 0x%x",
+ "GPIO direction changing 0x%x:0x%x from 0x%x to 0x%x",
msk,val,cval,nval);
} else {
nval = val;
@@ -5057,9 +4990,7 @@ void pvr2_hdw_status_poll(struct pvr2_hdw *hdw)
now. (Of course, no sub-drivers seem to implement it either.
But now it's a a chicken and egg problem...) */
v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, g_tuner, vtp);
- pvr2_trace(PVR2_TRACE_CHIPS, "subdev status poll"
- " type=%u strength=%u audio=0x%x cap=0x%x"
- " low=%u hi=%u",
+ pvr2_trace(PVR2_TRACE_CHIPS, "subdev status poll type=%u strength=%u audio=0x%x cap=0x%x low=%u hi=%u",
vtp->type,
vtp->signal, vtp->rxsubchans, vtp->capability,
vtp->rangelow, vtp->rangehigh);
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c
index 6da5fb544817..48d837e39a9c 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c
@@ -62,8 +62,7 @@ static int pvr2_i2c_write(struct pvr2_hdw *hdw, /* Context */
if (!data) length = 0;
if (length > (sizeof(hdw->cmd_buffer) - 3)) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Killing an I2C write to %u that is too large"
- " (desired=%u limit=%u)",
+ "Killing an I2C write to %u that is too large (desired=%u limit=%u)",
i2c_addr,
length,(unsigned int)(sizeof(hdw->cmd_buffer) - 3));
return -ENOTSUPP;
@@ -90,8 +89,7 @@ static int pvr2_i2c_write(struct pvr2_hdw *hdw, /* Context */
if (hdw->cmd_buffer[0] != 8) {
ret = -EIO;
if (hdw->cmd_buffer[0] != 7) {
- trace_i2c("unexpected status"
- " from i2_write[%d]: %d",
+ trace_i2c("unexpected status from i2_write[%d]: %d",
i2c_addr,hdw->cmd_buffer[0]);
}
}
@@ -116,16 +114,14 @@ static int pvr2_i2c_read(struct pvr2_hdw *hdw, /* Context */
if (!data) dlen = 0;
if (dlen > (sizeof(hdw->cmd_buffer) - 4)) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Killing an I2C read to %u that has wlen too large"
- " (desired=%u limit=%u)",
+ "Killing an I2C read to %u that has wlen too large (desired=%u limit=%u)",
i2c_addr,
dlen,(unsigned int)(sizeof(hdw->cmd_buffer) - 4));
return -ENOTSUPP;
}
if (res && (rlen > (sizeof(hdw->cmd_buffer) - 1))) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Killing an I2C read to %u that has rlen too large"
- " (desired=%u limit=%u)",
+ "Killing an I2C read to %u that has rlen too large (desired=%u limit=%u)",
i2c_addr,
rlen,(unsigned int)(sizeof(hdw->cmd_buffer) - 1));
return -ENOTSUPP;
@@ -154,8 +150,7 @@ static int pvr2_i2c_read(struct pvr2_hdw *hdw, /* Context */
if (hdw->cmd_buffer[0] != 8) {
ret = -EIO;
if (hdw->cmd_buffer[0] != 7) {
- trace_i2c("unexpected status"
- " from i2_read[%d]: %d",
+ trace_i2c("unexpected status from i2_read[%d]: %d",
i2c_addr,hdw->cmd_buffer[0]);
}
}
@@ -352,13 +347,11 @@ static int i2c_hack_cx25840(struct pvr2_hdw *hdw,
if ((ret != 0) || (*rdata == 0x04) || (*rdata == 0x0a)) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "WARNING: Detected a wedged cx25840 chip;"
- " the device will not work.");
+ "WARNING: Detected a wedged cx25840 chip; the device will not work.");
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
"WARNING: Try power cycling the pvrusb2 device.");
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "WARNING: Disabling further access to the device"
- " to prevent other foul-ups.");
+ "WARNING: Disabling further access to the device to prevent other foul-ups.");
// This blocks all further communication with the part.
hdw->i2c_func[0x44] = NULL;
pvr2_hdw_render_useless(hdw);
@@ -444,8 +437,7 @@ static int pvr2_i2c_xfer(struct i2c_adapter *i2c_adap,
}
} else if (num == 2) {
if (msgs[0].addr != msgs[1].addr) {
- trace_i2c("i2c refusing 2 phase transfer with"
- " conflicting target addresses");
+ trace_i2c("i2c refusing 2 phase transfer with conflicting target addresses");
ret = -ENOTSUPP;
goto done;
}
@@ -477,8 +469,7 @@ static int pvr2_i2c_xfer(struct i2c_adapter *i2c_adap,
ret = 2;
goto done;
} else {
- trace_i2c("i2c refusing complex transfer"
- " read0=%d read1=%d",
+ trace_i2c("i2c refusing complex transfer read0=%d read1=%d",
(msgs[0].flags & I2C_M_RD),
(msgs[1].flags & I2C_M_RD));
}
@@ -492,8 +483,7 @@ static int pvr2_i2c_xfer(struct i2c_adapter *i2c_adap,
for (idx = 0; idx < num; idx++) {
cnt = msgs[idx].len;
printk(KERN_INFO
- "pvrusb2 i2c xfer %u/%u:"
- " addr=0x%x len=%d %s",
+ "pvrusb2 i2c xfer %u/%u: addr=0x%x len=%d %s",
idx+1,num,
msgs[idx].addr,
cnt,
@@ -668,8 +658,7 @@ void pvr2_i2c_core_init(struct pvr2_hdw *hdw)
the emulated IR receiver. */
if (do_i2c_probe(hdw, 0x71)) {
pvr2_trace(PVR2_TRACE_INFO,
- "Device has newer IR hardware;"
- " disabling unneeded virtual IR device");
+ "Device has newer IR hardware; disabling unneeded virtual IR device");
hdw->i2c_func[0x18] = NULL;
/* Remember that this is a different device... */
hdw->ir_scheme_active = PVR2_IR_SCHEME_24XXX_MCE;
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-io.c b/drivers/media/usb/pvrusb2/pvrusb2-io.c
index e68ce24f27e3..a526684d6e80 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-io.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-io.c
@@ -113,8 +113,7 @@ static const char *pvr2_buffer_state_decode(enum pvr2_buffer_state st)
static void pvr2_buffer_describe(struct pvr2_buffer *bp,const char *msg)
{
pvr2_trace(PVR2_TRACE_INFO,
- "buffer%s%s %p state=%s id=%d status=%d"
- " stream=%p purb=%p sig=0x%x",
+ "buffer%s%s %p state=%s id=%d status=%d stream=%p purb=%p sig=0x%x",
(msg ? " " : ""),
(msg ? msg : ""),
bp,
@@ -156,8 +155,7 @@ static void pvr2_buffer_remove(struct pvr2_buffer *bp)
(*cnt)--;
(*bcnt) -= ccnt;
pvr2_trace(PVR2_TRACE_BUF_FLOW,
- "/*---TRACE_FLOW---*/"
- " bufferPool %8s dec cap=%07d cnt=%02d",
+ "/*---TRACE_FLOW---*/ bufferPool %8s dec cap=%07d cnt=%02d",
pvr2_buffer_state_decode(bp->state),*bcnt,*cnt);
bp->state = pvr2_buffer_state_none;
}
@@ -198,8 +196,7 @@ static int pvr2_buffer_set_ready(struct pvr2_buffer *bp)
(sp->r_count)++;
sp->r_bcount += bp->used_count;
pvr2_trace(PVR2_TRACE_BUF_FLOW,
- "/*---TRACE_FLOW---*/"
- " bufferPool %8s inc cap=%07d cnt=%02d",
+ "/*---TRACE_FLOW---*/ bufferPool %8s inc cap=%07d cnt=%02d",
pvr2_buffer_state_decode(bp->state),
sp->r_bcount,sp->r_count);
spin_unlock_irqrestore(&sp->list_lock,irq_flags);
@@ -224,8 +221,7 @@ static void pvr2_buffer_set_idle(struct pvr2_buffer *bp)
(sp->i_count)++;
sp->i_bcount += bp->max_count;
pvr2_trace(PVR2_TRACE_BUF_FLOW,
- "/*---TRACE_FLOW---*/"
- " bufferPool %8s inc cap=%07d cnt=%02d",
+ "/*---TRACE_FLOW---*/ bufferPool %8s inc cap=%07d cnt=%02d",
pvr2_buffer_state_decode(bp->state),
sp->i_bcount,sp->i_count);
spin_unlock_irqrestore(&sp->list_lock,irq_flags);
@@ -249,8 +245,7 @@ static void pvr2_buffer_set_queued(struct pvr2_buffer *bp)
(sp->q_count)++;
sp->q_bcount += bp->max_count;
pvr2_trace(PVR2_TRACE_BUF_FLOW,
- "/*---TRACE_FLOW---*/"
- " bufferPool %8s inc cap=%07d cnt=%02d",
+ "/*---TRACE_FLOW---*/ bufferPool %8s inc cap=%07d cnt=%02d",
pvr2_buffer_state_decode(bp->state),
sp->q_bcount,sp->q_count);
spin_unlock_irqrestore(&sp->list_lock,irq_flags);
@@ -293,8 +288,7 @@ static void pvr2_buffer_done(struct pvr2_buffer *bp)
bp->signature = 0;
bp->stream = NULL;
usb_free_urb(bp->purb);
- pvr2_trace(PVR2_TRACE_BUF_POOL,"/*---TRACE_FLOW---*/"
- " bufferDone %p",bp);
+ pvr2_trace(PVR2_TRACE_BUF_POOL,"/*---TRACE_FLOW---*/ bufferDone %p",bp);
}
static int pvr2_stream_buffer_count(struct pvr2_stream *sp,unsigned int cnt)
@@ -306,8 +300,7 @@ static int pvr2_stream_buffer_count(struct pvr2_stream *sp,unsigned int cnt)
if (cnt == sp->buffer_total_count) return 0;
pvr2_trace(PVR2_TRACE_BUF_POOL,
- "/*---TRACE_FLOW---*/ poolResize "
- " stream=%p cur=%d adj=%+d",
+ "/*---TRACE_FLOW---*/ poolResize stream=%p cur=%d adj=%+d",
sp,
sp->buffer_total_count,
cnt-sp->buffer_total_count);
@@ -374,8 +367,7 @@ static int pvr2_stream_achieve_buffer_count(struct pvr2_stream *sp)
if (sp->buffer_total_count == sp->buffer_target_count) return 0;
pvr2_trace(PVR2_TRACE_BUF_POOL,
- "/*---TRACE_FLOW---*/"
- " poolCheck stream=%p cur=%d tgt=%d",
+ "/*---TRACE_FLOW---*/ poolCheck stream=%p cur=%d tgt=%d",
sp,sp->buffer_total_count,sp->buffer_target_count);
if (sp->buffer_total_count < sp->buffer_target_count) {
@@ -454,8 +446,7 @@ static void buffer_complete(struct urb *urb)
bp->used_count = urb->actual_length;
if (sp->fail_count) {
pvr2_trace(PVR2_TRACE_TOLERANCE,
- "stream %p transfer ok"
- " - fail count reset",sp);
+ "stream %p transfer ok - fail count reset",sp);
sp->fail_count = 0;
}
} else if (sp->fail_count < sp->fail_tolerance) {
@@ -464,8 +455,7 @@ static void buffer_complete(struct urb *urb)
(sp->fail_count)++;
(sp->buffers_failed)++;
pvr2_trace(PVR2_TRACE_TOLERANCE,
- "stream %p ignoring error %d"
- " - fail count increased to %u",
+ "stream %p ignoring error %d - fail count increased to %u",
sp,urb->status,sp->fail_count);
} else {
(sp->buffers_failed)++;
@@ -666,8 +656,7 @@ int pvr2_buffer_set_buffer(struct pvr2_buffer *bp,void *ptr,unsigned int cnt)
bp->max_count = cnt;
bp->stream->i_bcount += bp->max_count;
pvr2_trace(PVR2_TRACE_BUF_FLOW,
- "/*---TRACE_FLOW---*/ bufferPool "
- " %8s cap cap=%07d cnt=%02d",
+ "/*---TRACE_FLOW---*/ bufferPool %8s cap cap=%07d cnt=%02d",
pvr2_buffer_state_decode(
pvr2_buffer_state_idle),
bp->stream->i_bcount,bp->stream->i_count);
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-ioread.c b/drivers/media/usb/pvrusb2/pvrusb2-ioread.c
index 614d55767a4e..ce4b0e2842c4 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-ioread.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-ioread.c
@@ -169,9 +169,7 @@ static int pvr2_ioread_start(struct pvr2_ioread *cp)
stat = pvr2_buffer_queue(bp);
if (stat < 0) {
pvr2_trace(PVR2_TRACE_DATA_FLOW,
- "/*---TRACE_READ---*/"
- " pvr2_ioread_start id=%p"
- " error=%d",
+ "/*---TRACE_READ---*/ pvr2_ioread_start id=%p error=%d",
cp,stat);
pvr2_ioread_stop(cp);
return stat;
@@ -209,8 +207,7 @@ int pvr2_ioread_setup(struct pvr2_ioread *cp,struct pvr2_stream *sp)
do {
if (cp->stream) {
pvr2_trace(PVR2_TRACE_START_STOP,
- "/*---TRACE_READ---*/"
- " pvr2_ioread_setup (tear-down) id=%p",cp);
+ "/*---TRACE_READ---*/ pvr2_ioread_setup (tear-down) id=%p",cp);
pvr2_ioread_stop(cp);
pvr2_stream_kill(cp->stream);
if (pvr2_stream_get_buffer_count(cp->stream)) {
@@ -220,8 +217,7 @@ int pvr2_ioread_setup(struct pvr2_ioread *cp,struct pvr2_stream *sp)
}
if (sp) {
pvr2_trace(PVR2_TRACE_START_STOP,
- "/*---TRACE_READ---*/"
- " pvr2_ioread_setup (setup) id=%p",cp);
+ "/*---TRACE_READ---*/ pvr2_ioread_setup (setup) id=%p",cp);
pvr2_stream_kill(sp);
ret = pvr2_stream_set_buffer_count(sp,BUFFER_COUNT);
if (ret < 0) {
@@ -270,9 +266,7 @@ static int pvr2_ioread_get_buffer(struct pvr2_ioread *cp)
if (stat < 0) {
// Streaming error...
pvr2_trace(PVR2_TRACE_DATA_FLOW,
- "/*---TRACE_READ---*/"
- " pvr2_ioread_read id=%p"
- " queue_error=%d",
+ "/*---TRACE_READ---*/ pvr2_ioread_read id=%p queue_error=%d",
cp,stat);
pvr2_ioread_stop(cp);
return 0;
@@ -292,9 +286,7 @@ static int pvr2_ioread_get_buffer(struct pvr2_ioread *cp)
if (stat < 0) {
// Streaming error...
pvr2_trace(PVR2_TRACE_DATA_FLOW,
- "/*---TRACE_READ---*/"
- " pvr2_ioread_read id=%p"
- " buffer_error=%d",
+ "/*---TRACE_READ---*/ pvr2_ioread_read id=%p buffer_error=%d",
cp,stat);
pvr2_ioread_stop(cp);
// Give up.
@@ -347,8 +339,7 @@ static void pvr2_ioread_filter(struct pvr2_ioread *cp)
if (cp->sync_buf_offs >= cp->sync_key_len) {
cp->sync_trashed_count -= cp->sync_key_len;
pvr2_trace(PVR2_TRACE_DATA_FLOW,
- "/*---TRACE_READ---*/"
- " sync_state <== 2 (skipped %u bytes)",
+ "/*---TRACE_READ---*/ sync_state <== 2 (skipped %u bytes)",
cp->sync_trashed_count);
cp->sync_state = 2;
cp->sync_buf_offs = 0;
@@ -358,8 +349,7 @@ static void pvr2_ioread_filter(struct pvr2_ioread *cp)
if (cp->c_data_offs < cp->c_data_len) {
// Sanity check - should NEVER get here
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "ERROR: pvr2_ioread filter sync problem"
- " len=%u offs=%u",
+ "ERROR: pvr2_ioread filter sync problem len=%u offs=%u",
cp->c_data_len,cp->c_data_offs);
// Get out so we don't get stuck in an infinite
// loop.
@@ -418,8 +408,7 @@ int pvr2_ioread_read(struct pvr2_ioread *cp,void __user *buf,unsigned int cnt)
if (!cnt) {
pvr2_trace(PVR2_TRACE_TRAP,
- "/*---TRACE_READ---*/ pvr2_ioread_read id=%p"
- " ZERO Request? Returning zero.",cp);
+ "/*---TRACE_READ---*/ pvr2_ioread_read id=%p ZERO Request? Returning zero.",cp);
return 0;
}
@@ -477,8 +466,7 @@ int pvr2_ioread_read(struct pvr2_ioread *cp,void __user *buf,unsigned int cnt)
// Consumed entire key; switch mode
// to normal.
pvr2_trace(PVR2_TRACE_DATA_FLOW,
- "/*---TRACE_READ---*/"
- " sync_state <== 0");
+ "/*---TRACE_READ---*/ sync_state <== 0");
cp->sync_state = 0;
}
} else {
@@ -502,8 +490,7 @@ int pvr2_ioread_read(struct pvr2_ioread *cp,void __user *buf,unsigned int cnt)
}
pvr2_trace(PVR2_TRACE_DATA_FLOW,
- "/*---TRACE_READ---*/ pvr2_ioread_read"
- " id=%p request=%d result=%d",
+ "/*---TRACE_READ---*/ pvr2_ioread_read id=%p request=%d result=%d",
cp,req_cnt,ret);
return ret;
}
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-std.c b/drivers/media/usb/pvrusb2/pvrusb2-std.c
index 9a596a3a4c27..cd7bc18a1ba2 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-std.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-std.c
@@ -357,8 +357,7 @@ struct v4l2_standard *pvr2_std_create_enum(unsigned int *countptr,
bcnt = pvr2_std_id_to_str(buf,sizeof(buf),fmsk);
pvr2_trace(
PVR2_TRACE_ERROR_LEGS,
- "WARNING:"
- " Failed to classify the following standard(s): %.*s",
+ "WARNING: Failed to classify the following standard(s): %.*s",
bcnt,buf);
}
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
index 2cc4d2b6f810..30e6057ea4c1 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
@@ -949,8 +949,7 @@ static long pvr2_v4l2_ioctl(struct file *file,
if (ret < 0) {
if (pvrusb2_debug & PVR2_TRACE_V4LIOCTL) {
pvr2_trace(PVR2_TRACE_V4LIOCTL,
- "pvr2_v4l2_do_ioctl failure, ret=%ld"
- " command was:", ret);
+ "pvr2_v4l2_do_ioctl failure, ret=%ld command was:", ret);
v4l_printk_ioctl(pvr2_hdw_get_driver_name(hdw), cmd);
}
} else {
@@ -1254,8 +1253,7 @@ static void pvr2_v4l2_dev_init(struct pvr2_v4l2_dev *dip,
nr_ptr = video_nr;
if (!dip->stream) {
pr_err(KBUILD_MODNAME
- ": Failed to set up pvrusb2 v4l video dev"
- " due to missing stream instance\n");
+ ": Failed to set up pvrusb2 v4l video dev due to missing stream instance\n");
return;
}
break;
@@ -1272,8 +1270,7 @@ static void pvr2_v4l2_dev_init(struct pvr2_v4l2_dev *dip,
break;
default:
/* Bail out (this should be impossible) */
- pr_err(KBUILD_MODNAME ": Failed to set up pvrusb2 v4l dev"
- " due to unrecognized config\n");
+ pr_err(KBUILD_MODNAME ": Failed to set up pvrusb2 v4l dev due to unrecognized config\n");
return;
}
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-video-v4l.c b/drivers/media/usb/pvrusb2/pvrusb2-video-v4l.c
index 105123ab36aa..6fee367139aa 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-video-v4l.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-video-v4l.c
@@ -91,9 +91,7 @@ void pvr2_saa7115_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
(hdw->input_val < 0) ||
(hdw->input_val >= sp->cnt)) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "*** WARNING *** subdev v4l2 set_input:"
- " Invalid routing scheme (%u)"
- " and/or input (%d)",
+ "*** WARNING *** subdev v4l2 set_input: Invalid routing scheme (%u) and/or input (%d)",
sid, hdw->input_val);
return;
}
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-wm8775.c b/drivers/media/usb/pvrusb2/pvrusb2-wm8775.c
index f1df94a2436f..7993983de5a6 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-wm8775.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-wm8775.c
@@ -49,8 +49,7 @@ void pvr2_wm8775_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
input = 2;
break;
}
- pvr2_trace(PVR2_TRACE_CHIPS, "subdev wm8775"
- " set_input(val=%d route=0x%x)",
+ pvr2_trace(PVR2_TRACE_CHIPS, "subdev wm8775 set_input(val=%d route=0x%x)",
hdw->input_val, input);
sd->ops->audio->s_routing(sd, input, 0, 0);
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 42/57] [media] pwc: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (40 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 41/57] [media] pvrusb2: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 43/57] [media] siano: " Mauro Carvalho Chehab
` (15 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Hans Verkuil, Mauro Carvalho Chehab,
Geunyoung Kim, Junghak Sung, Inki Dae, Wolfram Sang,
Arnd Bergmann, Hans de Goede, Julia Lawall
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/usb/pwc/pwc-if.c | 3 +--
drivers/media/usb/pwc/pwc-v4l.c | 6 ++----
2 files changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/media/usb/pwc/pwc-if.c b/drivers/media/usb/pwc/pwc-if.c
index ff657644b6b3..aba3d4fad388 100644
--- a/drivers/media/usb/pwc/pwc-if.c
+++ b/drivers/media/usb/pwc/pwc-if.c
@@ -238,8 +238,7 @@ static void pwc_frame_complete(struct pwc_device *pdev)
} else {
/* Check for underflow first */
if (fbuf->filled < pdev->frame_total_size) {
- PWC_DEBUG_FLOW("Frame buffer underflow (%d bytes);"
- " discarded.\n", fbuf->filled);
+ PWC_DEBUG_FLOW("Frame buffer underflow (%d bytes); discarded.\n", fbuf->filled);
} else {
fbuf->vb.field = V4L2_FIELD_NONE;
fbuf->vb.sequence = pdev->vframe_count;
diff --git a/drivers/media/usb/pwc/pwc-v4l.c b/drivers/media/usb/pwc/pwc-v4l.c
index 3d987984602f..92f04db6bbae 100644
--- a/drivers/media/usb/pwc/pwc-v4l.c
+++ b/drivers/media/usb/pwc/pwc-v4l.c
@@ -406,8 +406,7 @@ static void pwc_vidioc_fill_fmt(struct v4l2_format *f,
f->fmt.pix.bytesperline = f->fmt.pix.width;
f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.width * 3 / 2;
f->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB;
- PWC_DEBUG_IOCTL("pwc_vidioc_fill_fmt() "
- "width=%d, height=%d, bytesperline=%d, sizeimage=%d, pixelformat=%c%c%c%c\n",
+ PWC_DEBUG_IOCTL("pwc_vidioc_fill_fmt() width=%d, height=%d, bytesperline=%d, sizeimage=%d, pixelformat=%c%c%c%c\n",
f->fmt.pix.width,
f->fmt.pix.height,
f->fmt.pix.bytesperline,
@@ -473,8 +472,7 @@ static int pwc_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f)
pixelformat = f->fmt.pix.pixelformat;
- PWC_DEBUG_IOCTL("Trying to set format to: width=%d height=%d fps=%d "
- "format=%c%c%c%c\n",
+ PWC_DEBUG_IOCTL("Trying to set format to: width=%d height=%d fps=%d format=%c%c%c%c\n",
f->fmt.pix.width, f->fmt.pix.height, pdev->vframes,
(pixelformat)&255,
(pixelformat>>8)&255,
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 43/57] [media] siano: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (41 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 42/57] [media] pwc: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 44/57] [media] stkwebcam: " Mauro Carvalho Chehab
` (14 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab,
Javier Martinez Canillas, Sakari Ailus
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/usb/siano/smsusb.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/media/usb/siano/smsusb.c b/drivers/media/usb/siano/smsusb.c
index c2e25876e93b..feace863e8d5 100644
--- a/drivers/media/usb/siano/smsusb.c
+++ b/drivers/media/usb/siano/smsusb.c
@@ -604,8 +604,7 @@ static int smsusb_resume(struct usb_interface *intf)
intf->cur_altsetting->desc.
bInterfaceNumber, 0);
if (rc < 0) {
- printk(KERN_INFO "%s usb_set_interface failed, "
- "rc %d\n", __func__, rc);
+ printk(KERN_INFO "%s usb_set_interface failed, rc %d\n", __func__, rc);
return rc;
}
}
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 44/57] [media] stkwebcam: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (42 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 43/57] [media] siano: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 45/57] [media] tm6000: " Mauro Carvalho Chehab
` (13 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Wolfram Sang,
Greg Kroah-Hartman, Hans Verkuil
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/usb/stkwebcam/stk-sensor.c | 3 +--
drivers/media/usb/stkwebcam/stk-webcam.c | 3 +--
2 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/media/usb/stkwebcam/stk-sensor.c b/drivers/media/usb/stkwebcam/stk-sensor.c
index e546b014d7ad..65334a00e3b3 100644
--- a/drivers/media/usb/stkwebcam/stk-sensor.c
+++ b/drivers/media/usb/stkwebcam/stk-sensor.c
@@ -391,8 +391,7 @@ int stk_sensor_init(struct stk_camera *dev)
}
stk_sensor_write_regvals(dev, ov_initvals);
msleep(10);
- STK_INFO("OmniVision sensor detected, id %02X%02X"
- " at address %x\n", idh, idl, SENSOR_ADDRESS);
+ STK_INFO("OmniVision sensor detected, id %02X%02X at address %x\n", idh, idl, SENSOR_ADDRESS);
return 0;
}
diff --git a/drivers/media/usb/stkwebcam/stk-webcam.c b/drivers/media/usb/stkwebcam/stk-webcam.c
index db200c9d796d..267a22f24f82 100644
--- a/drivers/media/usb/stkwebcam/stk-webcam.c
+++ b/drivers/media/usb/stkwebcam/stk-webcam.c
@@ -366,8 +366,7 @@ static void stk_isoc_handler(struct urb *urb)
if (fb->v4lbuf.bytesused != 0
&& fb->v4lbuf.bytesused != dev->frame_size) {
(void) (printk_ratelimit() &&
- STK_ERROR("frame %d, "
- "bytesused=%d, skipping\n",
+ STK_ERROR("frame %d, bytesused=%d, skipping\n",
i, fb->v4lbuf.bytesused));
fb->v4lbuf.bytesused = 0;
fill = fb->buffer;
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 45/57] [media] tm6000: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (43 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 44/57] [media] stkwebcam: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 46/57] [media] ttusb-budget: " Mauro Carvalho Chehab
` (12 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Hans Verkuil,
Julia Lawall, Wolfram Sang, Greg Kroah-Hartman
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/usb/tm6000/tm6000-alsa.c | 4 +---
drivers/media/usb/tm6000/tm6000-core.c | 11 +++--------
drivers/media/usb/tm6000/tm6000-dvb.c | 16 +++++-----------
drivers/media/usb/tm6000/tm6000-i2c.c | 3 +--
drivers/media/usb/tm6000/tm6000-stds.c | 3 +--
drivers/media/usb/tm6000/tm6000-video.c | 15 +++++----------
6 files changed, 16 insertions(+), 36 deletions(-)
diff --git a/drivers/media/usb/tm6000/tm6000-alsa.c b/drivers/media/usb/tm6000/tm6000-alsa.c
index f16fbd1f9f51..422322541af6 100644
--- a/drivers/media/usb/tm6000/tm6000-alsa.c
+++ b/drivers/media/usb/tm6000/tm6000-alsa.c
@@ -58,9 +58,7 @@ MODULE_PARM_DESC(index, "Index value for tm6000x capture interface(s).");
MODULE_DESCRIPTION("ALSA driver module for tm5600/tm6000/tm6010 based TV cards");
MODULE_AUTHOR("Mauro Carvalho Chehab");
MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("{{Trident,tm5600},"
- "{{Trident,tm6000},"
- "{{Trident,tm6010}");
+MODULE_SUPPORTED_DEVICE("{{Trident,tm5600},{{Trident,tm6000},{{Trident,tm6010}");
static unsigned int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "enable debug messages");
diff --git a/drivers/media/usb/tm6000/tm6000-core.c b/drivers/media/usb/tm6000/tm6000-core.c
index 7c32353c59db..0dfef52acd12 100644
--- a/drivers/media/usb/tm6000/tm6000-core.c
+++ b/drivers/media/usb/tm6000/tm6000-core.c
@@ -602,8 +602,7 @@ int tm6000_init(struct tm6000_core *dev)
for (i = 0; i < size; i++) {
rc = tm6000_set_reg(dev, tab[i].req, tab[i].reg, tab[i].val);
if (rc < 0) {
- printk(KERN_ERR "Error %i while setting req %d, "
- "reg %d to value %d\n", rc,
+ printk(KERN_ERR "Error %i while setting req %d, reg %d to value %d\n", rc,
tab[i].req, tab[i].reg, tab[i].val);
return rc;
}
@@ -761,9 +760,7 @@ int tm6000_tvaudio_set_mute(struct tm6000_core *dev, u8 mute)
if (dev->dev_type == TM6010)
tm6010_set_mute_sif(dev, mute);
else {
- printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has"
- " SIF audio inputs. Please check the %s"
- " configuration.\n", dev->name);
+ printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has SIF audio inputs. Please check the %s configuration.\n", dev->name);
return -EINVAL;
}
break;
@@ -822,9 +819,7 @@ void tm6000_set_volume(struct tm6000_core *dev, int vol)
if (dev->dev_type == TM6010)
tm6010_set_volume_sif(dev, vol);
else
- printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has"
- " SIF audio inputs. Please check the %s"
- " configuration.\n", dev->name);
+ printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has SIF audio inputs. Please check the %s configuration.\n", dev->name);
break;
case TM6000_AMUX_ADC1:
case TM6000_AMUX_ADC2:
diff --git a/drivers/media/usb/tm6000/tm6000-dvb.c b/drivers/media/usb/tm6000/tm6000-dvb.c
index 0426b210383b..70dbaec1219e 100644
--- a/drivers/media/usb/tm6000/tm6000-dvb.c
+++ b/drivers/media/usb/tm6000/tm6000-dvb.c
@@ -35,9 +35,7 @@ MODULE_DESCRIPTION("DVB driver extension module for tm5600/6000/6010 based TV ca
MODULE_AUTHOR("Mauro Carvalho Chehab");
MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("{{Trident, tm5600},"
- "{{Trident, tm6000},"
- "{{Trident, tm6010}");
+MODULE_SUPPORTED_DEVICE("{{Trident, tm5600},{{Trident, tm6000},{{Trident, tm6010}");
static int debug;
@@ -292,13 +290,11 @@ static int register_dvb(struct tm6000_core *dev)
}
if (!dvb_attach(xc2028_attach, dvb->frontend, &cfg)) {
- printk(KERN_ERR "tm6000: couldn't register "
- "frontend (xc3028)\n");
+ printk(KERN_ERR "tm6000: couldn't register frontend (xc3028)\n");
ret = -EINVAL;
goto frontend_err;
}
- printk(KERN_INFO "tm6000: XC2028/3028 asked to be "
- "attached to frontend!\n");
+ printk(KERN_INFO "tm6000: XC2028/3028 asked to be attached to frontend!\n");
break;
}
case TUNER_XC5000: {
@@ -315,13 +311,11 @@ static int register_dvb(struct tm6000_core *dev)
}
if (!dvb_attach(xc5000_attach, dvb->frontend, &dev->i2c_adap, &cfg)) {
- printk(KERN_ERR "tm6000: couldn't register "
- "frontend (xc5000)\n");
+ printk(KERN_ERR "tm6000: couldn't register frontend (xc5000)\n");
ret = -EINVAL;
goto frontend_err;
}
- printk(KERN_INFO "tm6000: XC5000 asked to be "
- "attached to frontend!\n");
+ printk(KERN_INFO "tm6000: XC5000 asked to be attached to frontend!\n");
break;
}
}
diff --git a/drivers/media/usb/tm6000/tm6000-i2c.c b/drivers/media/usb/tm6000/tm6000-i2c.c
index c7e23e3dd75e..b01d3ee56e77 100644
--- a/drivers/media/usb/tm6000/tm6000-i2c.c
+++ b/drivers/media/usb/tm6000/tm6000-i2c.c
@@ -173,8 +173,7 @@ static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap,
* immediately after a 1 or 2 byte write to select
* a register. We cannot fulfil this request.
*/
- i2c_dprintk(2, " read without preceding write not"
- " supported");
+ i2c_dprintk(2, " read without preceding write not supported");
rc = -EOPNOTSUPP;
goto err;
} else if (i + 1 < num && msgs[i].len <= 2 &&
diff --git a/drivers/media/usb/tm6000/tm6000-stds.c b/drivers/media/usb/tm6000/tm6000-stds.c
index 93a4b2434b6e..4064a5e8fae1 100644
--- a/drivers/media/usb/tm6000/tm6000-stds.c
+++ b/drivers/media/usb/tm6000/tm6000-stds.c
@@ -464,8 +464,7 @@ static int tm6000_load_std(struct tm6000_core *dev, struct tm6000_reg_settings *
for (i = 0; set[i].req; i++) {
rc = tm6000_set_reg(dev, set[i].req, set[i].reg, set[i].value);
if (rc < 0) {
- printk(KERN_ERR "Error %i while setting "
- "req %d, reg %d to value %d\n",
+ printk(KERN_ERR "Error %i while setting req %d, reg %d to value %d\n",
rc, set[i].req, set[i].reg, set[i].value);
return rc;
}
diff --git a/drivers/media/usb/tm6000/tm6000-video.c b/drivers/media/usb/tm6000/tm6000-video.c
index dee7e7d3d47d..7cdf030d7071 100644
--- a/drivers/media/usb/tm6000/tm6000-video.c
+++ b/drivers/media/usb/tm6000/tm6000-video.c
@@ -615,8 +615,7 @@ static int tm6000_prepare_isoc(struct tm6000_core *dev)
return -ENOMEM;
}
- dprintk(dev, V4L2_DEBUG_QUEUE, "Allocating %d x %d packets"
- " (%d bytes) of %d bytes each to handle %u size\n",
+ dprintk(dev, V4L2_DEBUG_QUEUE, "Allocating %d x %d packets (%d bytes) of %d bytes each to handle %u size\n",
max_packets, num_bufs, sb_size,
dev->isoc_in.maxsize, size);
@@ -939,8 +938,7 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
fmt = format_by_fourcc(f->fmt.pix.pixelformat);
if (NULL == fmt) {
- dprintk(dev, 2, "Fourcc format (0x%08x)"
- " invalid.\n", f->fmt.pix.pixelformat);
+ dprintk(dev, 2, "Fourcc format (0x%08x) invalid.\n", f->fmt.pix.pixelformat);
return -EINVAL;
}
@@ -1366,14 +1364,11 @@ static int __tm6000_open(struct file *file)
fh->width = dev->width;
fh->height = dev->height;
- dprintk(dev, V4L2_DEBUG_OPEN, "Open: fh=0x%08lx, dev=0x%08lx, "
- "dev->vidq=0x%08lx\n",
+ dprintk(dev, V4L2_DEBUG_OPEN, "Open: fh=0x%08lx, dev=0x%08lx, dev->vidq=0x%08lx\n",
(unsigned long)fh, (unsigned long)dev,
(unsigned long)&dev->vidq);
- dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty "
- "queued=%d\n", list_empty(&dev->vidq.queued));
- dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty "
- "active=%d\n", list_empty(&dev->vidq.active));
+ dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty queued=%d\n", list_empty(&dev->vidq.queued));
+ dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty active=%d\n", list_empty(&dev->vidq.active));
/* initialize hardware on analog mode */
rc = tm6000_init_analog_mode(dev);
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 46/57] [media] ttusb-budget: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (44 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 45/57] [media] tm6000: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 47/57] [media] ttusb-dec: " Mauro Carvalho Chehab
` (11 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c
index d52d4a8d39ad..361e40b56045 100644
--- a/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c
@@ -767,8 +767,7 @@ static void ttusb_iso_irq(struct urb *urb)
for (i = 0; i < urb->number_of_packets; ++i) {
numpkt++;
if (time_after_eq(jiffies, lastj + HZ)) {
- dprintk("frames/s: %lu (ts: %d, stuff %d, "
- "sec: %d, invalid: %d, all: %d)\n",
+ dprintk("frames/s: %lu (ts: %d, stuff %d, sec: %d, invalid: %d, all: %d)\n",
numpkt * HZ / (jiffies - lastj),
numts, numstuff, numsec, numinvalid,
numts + numstuff + numsec + numinvalid);
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 47/57] [media] ttusb-dec: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (45 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 46/57] [media] ttusb-budget: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 48/57] [media] usbvision: " Mauro Carvalho Chehab
` (10 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Julia Lawall
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/usb/ttusb-dec/ttusb_dec.c | 18 ++++++------------
1 file changed, 6 insertions(+), 12 deletions(-)
diff --git a/drivers/media/usb/ttusb-dec/ttusb_dec.c b/drivers/media/usb/ttusb-dec/ttusb_dec.c
index 35d5003ff809..6d1b84be105a 100644
--- a/drivers/media/usb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/usb/ttusb-dec/ttusb_dec.c
@@ -708,8 +708,7 @@ static void ttusb_dec_process_urb_frame(struct ttusb_dec *dec, u8 *b,
dec->packet_payload_length = 2;
dec->packet_state = 7;
} else {
- printk("%s: unknown packet type: "
- "%02x%02x\n", __func__,
+ printk("%s: unknown packet type: %02x%02x\n", __func__,
dec->packet[0], dec->packet[1]);
dec->packet_state = 0;
}
@@ -961,8 +960,7 @@ static int ttusb_dec_start_iso_xfer(struct ttusb_dec *dec)
for (i = 0; i < ISO_BUF_COUNT; i++) {
if ((result = usb_submit_urb(dec->iso_urb[i],
GFP_ATOMIC))) {
- printk("%s: failed urb submission %d: "
- "error %d\n", __func__, i, result);
+ printk("%s: failed urb submission %d: error %d\n", __func__, i, result);
while (i) {
usb_kill_urb(dec->iso_urb[i - 1]);
@@ -1375,8 +1373,7 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec)
memcpy(&tmp, &firmware[56], 4);
crc32_check = ntohl(tmp);
if (crc32_csum != crc32_check) {
- printk("%s: crc32 check of DSP code failed (calculated "
- "0x%08x != 0x%08x in file), file invalid.\n",
+ printk("%s: crc32 check of DSP code failed (calculated 0x%08x != 0x%08x in file), file invalid.\n",
__func__, crc32_csum, crc32_check);
release_firmware(fw_entry);
return -ENOENT;
@@ -1453,11 +1450,9 @@ static int ttusb_dec_init_stb(struct ttusb_dec *dec)
if (!mode) {
if (version == 0xABCDEFAB)
- printk(KERN_INFO "ttusb_dec: no version "
- "info in Firmware\n");
+ printk(KERN_INFO "ttusb_dec: no version info in Firmware\n");
else
- printk(KERN_INFO "ttusb_dec: Firmware "
- "%x.%02x%c%c\n",
+ printk(KERN_INFO "ttusb_dec: Firmware %x.%02x%c%c\n",
version >> 24, (version >> 16) & 0xff,
(version >> 8) & 0xff, version & 0xff);
@@ -1481,8 +1476,7 @@ static int ttusb_dec_init_stb(struct ttusb_dec *dec)
ttusb_dec_set_model(dec, TTUSB_DEC2540T);
break;
default:
- printk(KERN_ERR "%s: unknown model returned "
- "by firmware (%08x) - please report\n",
+ printk(KERN_ERR "%s: unknown model returned by firmware (%08x) - please report\n",
__func__, model);
return -ENOENT;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 48/57] [media] usbvision: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (46 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 47/57] [media] ttusb-dec: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 49/57] [media] uvc: " Mauro Carvalho Chehab
` (9 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Hans Verkuil, Mauro Carvalho Chehab,
Wolfram Sang, Arnd Bergmann, Greg Kroah-Hartman, Vladis Dronov,
Insu Yun, Geliang Tang, Oliver Neukum
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/usb/usbvision/usbvision-core.c | 15 +++++----------
drivers/media/usb/usbvision/usbvision-video.c | 3 +--
2 files changed, 6 insertions(+), 12 deletions(-)
diff --git a/drivers/media/usb/usbvision/usbvision-core.c b/drivers/media/usb/usbvision/usbvision-core.c
index c23bf73a68ea..4aed365da61d 100644
--- a/drivers/media/usb/usbvision/usbvision-core.c
+++ b/drivers/media/usb/usbvision/usbvision-core.c
@@ -1656,8 +1656,7 @@ static int usbvision_set_video_format(struct usb_usbvision *usbvision, int forma
(__u16) USBVISION_FILT_CONT, value, 2, HZ);
if (rc < 0) {
- printk(KERN_ERR "%s: ERROR=%d. USBVISION stopped - "
- "reconnect or reload driver.\n", proc, rc);
+ printk(KERN_ERR "%s: ERROR=%d. USBVISION stopped - reconnect or reload driver.\n", proc, rc);
}
usbvision->isoc_mode = format;
return rc;
@@ -1890,8 +1889,7 @@ static int usbvision_set_compress_params(struct usb_usbvision *usbvision)
(__u16) USBVISION_INTRA_CYC, value, 5, HZ);
if (rc < 0) {
- printk(KERN_ERR "%sERROR=%d. USBVISION stopped - "
- "reconnect or reload driver.\n", proc, rc);
+ printk(KERN_ERR "%sERROR=%d. USBVISION stopped - reconnect or reload driver.\n", proc, rc);
return rc;
}
@@ -1921,8 +1919,7 @@ static int usbvision_set_compress_params(struct usb_usbvision *usbvision)
(__u16) USBVISION_PCM_THR1, value, 6, HZ);
if (rc < 0) {
- printk(KERN_ERR "%sERROR=%d. USBVISION stopped - "
- "reconnect or reload driver.\n", proc, rc);
+ printk(KERN_ERR "%sERROR=%d. USBVISION stopped - reconnect or reload driver.\n", proc, rc);
}
return rc;
}
@@ -1960,8 +1957,7 @@ int usbvision_set_input(struct usb_usbvision *usbvision)
rc = usbvision_write_reg(usbvision, USBVISION_VIN_REG1, value[0]);
if (rc < 0) {
- printk(KERN_ERR "%sERROR=%d. USBVISION stopped - "
- "reconnect or reload driver.\n", proc, rc);
+ printk(KERN_ERR "%sERROR=%d. USBVISION stopped - reconnect or reload driver.\n", proc, rc);
return rc;
}
@@ -2026,8 +2022,7 @@ int usbvision_set_input(struct usb_usbvision *usbvision)
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT, 0,
(__u16) USBVISION_LXSIZE_I, value, 8, HZ);
if (rc < 0) {
- printk(KERN_ERR "%sERROR=%d. USBVISION stopped - "
- "reconnect or reload driver.\n", proc, rc);
+ printk(KERN_ERR "%sERROR=%d. USBVISION stopped - reconnect or reload driver.\n", proc, rc);
return rc;
}
diff --git a/drivers/media/usb/usbvision/usbvision-video.c b/drivers/media/usb/usbvision/usbvision-video.c
index c8b4eb2ee7a2..74d3fb6a48ba 100644
--- a/drivers/media/usb/usbvision/usbvision-video.c
+++ b/drivers/media/usb/usbvision/usbvision-video.c
@@ -1456,8 +1456,7 @@ static int usbvision_probe(struct usb_interface *intf,
}
if (interface->desc.bNumEndpoints < 2) {
- dev_err(&intf->dev, "interface %d has %d endpoints, but must"
- " have minimum 2\n", ifnum, interface->desc.bNumEndpoints);
+ dev_err(&intf->dev, "interface %d has %d endpoints, but must have minimum 2\n", ifnum, interface->desc.bNumEndpoints);
ret = -ENODEV;
goto err_usb;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 49/57] [media] uvc: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (47 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 48/57] [media] usbvision: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-17 13:49 ` Laurent Pinchart
2016-10-14 20:20 ` [PATCH 50/57] [media] zr364xx: " Mauro Carvalho Chehab
` (8 subsequent siblings)
57 siblings, 1 reply; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Laurent Pinchart, Mauro Carvalho Chehab
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/usb/uvc/uvc_ctrl.c | 24 ++----
drivers/media/usb/uvc/uvc_debugfs.c | 3 +-
drivers/media/usb/uvc/uvc_driver.c | 148 ++++++++++++------------------------
drivers/media/usb/uvc/uvc_entity.c | 6 +-
drivers/media/usb/uvc/uvc_isight.c | 9 +--
drivers/media/usb/uvc/uvc_status.c | 15 ++--
drivers/media/usb/uvc/uvc_v4l2.c | 6 +-
drivers/media/usb/uvc/uvc_video.c | 69 ++++++-----------
8 files changed, 91 insertions(+), 189 deletions(-)
diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c
index c2ee6e39fd0c..6f26451bcb75 100644
--- a/drivers/media/usb/uvc/uvc_ctrl.c
+++ b/drivers/media/usb/uvc/uvc_ctrl.c
@@ -960,8 +960,7 @@ static int uvc_ctrl_populate_cache(struct uvc_video_chain *chain,
* resolution value to zero.
*/
uvc_warn_once(chain->dev, UVC_WARN_XU_GET_RES,
- "UVC non compliance - GET_RES failed on "
- "an XU control. Enabling workaround.\n");
+ "UVC non compliance - GET_RES failed on an XU control. Enabling workaround.\n");
memset(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_RES), 0,
ctrl->info.size);
}
@@ -1680,8 +1679,7 @@ static int uvc_ctrl_fill_xu_info(struct uvc_device *dev,
uvc_ctrl_fixup_xu_info(dev, ctrl, info);
- uvc_trace(UVC_TRACE_CONTROL, "XU control %pUl/%u queried: len %u, "
- "flags { get %u set %u auto %u }.\n",
+ uvc_trace(UVC_TRACE_CONTROL, "XU control %pUl/%u queried: len %u, flags { get %u set %u auto %u }.\n",
info->entity, info->selector, info->size,
(info->flags & UVC_CTRL_FLAG_GET_CUR) ? 1 : 0,
(info->flags & UVC_CTRL_FLAG_SET_CUR) ? 1 : 0,
@@ -1710,8 +1708,7 @@ static int uvc_ctrl_init_xu_ctrl(struct uvc_device *dev,
ret = uvc_ctrl_add_info(dev, ctrl, &info);
if (ret < 0)
- uvc_trace(UVC_TRACE_CONTROL, "Failed to initialize control "
- "%pUl/%u on device %s entity %u\n", info.entity,
+ uvc_trace(UVC_TRACE_CONTROL, "Failed to initialize control %pUl/%u on device %s entity %u\n", info.entity,
info.selector, dev->udev->devpath, ctrl->entity->id);
return ret;
@@ -1904,8 +1901,7 @@ static int uvc_ctrl_add_info(struct uvc_device *dev, struct uvc_control *ctrl,
ctrl->initialized = 1;
- uvc_trace(UVC_TRACE_CONTROL, "Added control %pUl/%u to device %s "
- "entity %u\n", ctrl->info.entity, ctrl->info.selector,
+ uvc_trace(UVC_TRACE_CONTROL, "Added control %pUl/%u to device %s entity %u\n", ctrl->info.entity, ctrl->info.selector,
dev->udev->devpath, ctrl->entity->id);
done:
@@ -1964,8 +1960,7 @@ int uvc_ctrl_add_mapping(struct uvc_video_chain *chain,
int ret;
if (mapping->id & ~V4L2_CTRL_ID_MASK) {
- uvc_trace(UVC_TRACE_CONTROL, "Can't add mapping '%s', control "
- "id 0x%08x is invalid.\n", mapping->name,
+ uvc_trace(UVC_TRACE_CONTROL, "Can't add mapping '%s', control id 0x%08x is invalid.\n", mapping->name,
mapping->id);
return -EINVAL;
}
@@ -2004,8 +1999,7 @@ int uvc_ctrl_add_mapping(struct uvc_video_chain *chain,
list_for_each_entry(map, &ctrl->info.mappings, list) {
if (mapping->id == map->id) {
- uvc_trace(UVC_TRACE_CONTROL, "Can't add mapping '%s', "
- "control id 0x%08x already exists.\n",
+ uvc_trace(UVC_TRACE_CONTROL, "Can't add mapping '%s', control id 0x%08x already exists.\n",
mapping->name, mapping->id);
ret = -EEXIST;
goto done;
@@ -2015,8 +2009,7 @@ int uvc_ctrl_add_mapping(struct uvc_video_chain *chain,
/* Prevent excess memory consumption */
if (atomic_inc_return(&dev->nmappings) > UVC_MAX_CONTROL_MAPPINGS) {
atomic_dec(&dev->nmappings);
- uvc_trace(UVC_TRACE_CONTROL, "Can't add mapping '%s', maximum "
- "mappings count (%u) exceeded.\n", mapping->name,
+ uvc_trace(UVC_TRACE_CONTROL, "Can't add mapping '%s', maximum mappings count (%u) exceeded.\n", mapping->name,
UVC_MAX_CONTROL_MAPPINGS);
ret = -ENOMEM;
goto done;
@@ -2086,8 +2079,7 @@ static void uvc_ctrl_prune_entity(struct uvc_device *dev,
!uvc_test_bit(controls, blacklist[i].index))
continue;
- uvc_trace(UVC_TRACE_CONTROL, "%u/%u control is black listed, "
- "removing it.\n", entity->id, blacklist[i].index);
+ uvc_trace(UVC_TRACE_CONTROL, "%u/%u control is black listed, removing it.\n", entity->id, blacklist[i].index);
uvc_clear_bit(controls, blacklist[i].index);
}
diff --git a/drivers/media/usb/uvc/uvc_debugfs.c b/drivers/media/usb/uvc/uvc_debugfs.c
index 14561a5abb79..bf6c82e73d5f 100644
--- a/drivers/media/usb/uvc/uvc_debugfs.c
+++ b/drivers/media/usb/uvc/uvc_debugfs.c
@@ -88,8 +88,7 @@ int uvc_debugfs_init_stream(struct uvc_streaming *stream)
dent = debugfs_create_dir(dir_name, uvc_debugfs_root_dir);
if (IS_ERR_OR_NULL(dent)) {
- uvc_printk(KERN_INFO, "Unable to create debugfs %s "
- "directory.\n", dir_name);
+ uvc_printk(KERN_INFO, "Unable to create debugfs %s directory.\n", dir_name);
return -ENODEV;
}
diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
index 9c4b56b4a9c6..aaff330e147f 100644
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -370,8 +370,7 @@ static int uvc_parse_format(struct uvc_device *dev,
case UVC_VS_FORMAT_FRAME_BASED:
n = buffer[2] == UVC_VS_FORMAT_UNCOMPRESSED ? 27 : 28;
if (buflen < n) {
- uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
- "interface %d FORMAT error\n",
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface %d FORMAT error\n",
dev->udev->devnum,
alts->desc.bInterfaceNumber);
return -EINVAL;
@@ -418,8 +417,7 @@ static int uvc_parse_format(struct uvc_device *dev,
case UVC_VS_FORMAT_MJPEG:
if (buflen < 11) {
- uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
- "interface %d FORMAT error\n",
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface %d FORMAT error\n",
dev->udev->devnum,
alts->desc.bInterfaceNumber);
return -EINVAL;
@@ -434,8 +432,7 @@ static int uvc_parse_format(struct uvc_device *dev,
case UVC_VS_FORMAT_DV:
if (buflen < 9) {
- uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
- "interface %d FORMAT error\n",
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface %d FORMAT error\n",
dev->udev->devnum,
alts->desc.bInterfaceNumber);
return -EINVAL;
@@ -452,8 +449,7 @@ static int uvc_parse_format(struct uvc_device *dev,
strlcpy(format->name, "HD-DV", sizeof format->name);
break;
default:
- uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
- "interface %d: unknown DV format %u\n",
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface %d: unknown DV format %u\n",
dev->udev->devnum,
alts->desc.bInterfaceNumber, buffer[8]);
return -EINVAL;
@@ -481,8 +477,7 @@ static int uvc_parse_format(struct uvc_device *dev,
case UVC_VS_FORMAT_STREAM_BASED:
/* Not supported yet. */
default:
- uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
- "interface %d unsupported format %u\n",
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface %d unsupported format %u\n",
dev->udev->devnum, alts->desc.bInterfaceNumber,
buffer[2]);
return -EINVAL;
@@ -507,8 +502,7 @@ static int uvc_parse_format(struct uvc_device *dev,
n = n ? n : 3;
if (buflen < 26 + 4*n) {
- uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
- "interface %d FRAME error\n", dev->udev->devnum,
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface %d FRAME error\n", dev->udev->devnum,
alts->desc.bInterfaceNumber);
return -EINVAL;
}
@@ -590,8 +584,7 @@ static int uvc_parse_format(struct uvc_device *dev,
if (buflen > 2 && buffer[1] == USB_DT_CS_INTERFACE &&
buffer[2] == UVC_VS_COLORFORMAT) {
if (buflen < 6) {
- uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
- "interface %d COLORFORMAT error\n",
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface %d COLORFORMAT error\n",
dev->udev->devnum,
alts->desc.bInterfaceNumber);
return -EINVAL;
@@ -623,15 +616,13 @@ static int uvc_parse_streaming(struct uvc_device *dev,
if (intf->cur_altsetting->desc.bInterfaceSubClass
!= UVC_SC_VIDEOSTREAMING) {
- uvc_trace(UVC_TRACE_DESCR, "device %d interface %d isn't a "
- "video streaming interface\n", dev->udev->devnum,
+ uvc_trace(UVC_TRACE_DESCR, "device %d interface %d isn't a video streaming interface\n", dev->udev->devnum,
intf->altsetting[0].desc.bInterfaceNumber);
return -EINVAL;
}
if (usb_driver_claim_interface(&uvc_driver.driver, intf, dev)) {
- uvc_trace(UVC_TRACE_DESCR, "device %d interface %d is already "
- "claimed\n", dev->udev->devnum,
+ uvc_trace(UVC_TRACE_DESCR, "device %d interface %d is already claimed\n", dev->udev->devnum,
intf->altsetting[0].desc.bInterfaceNumber);
return -EINVAL;
}
@@ -659,8 +650,7 @@ static int uvc_parse_streaming(struct uvc_device *dev,
if (ep->extralen > 2 &&
ep->extra[1] == USB_DT_CS_INTERFACE) {
- uvc_trace(UVC_TRACE_DESCR, "trying extra data "
- "from endpoint %u.\n", i);
+ uvc_trace(UVC_TRACE_DESCR, "trying extra data from endpoint %u.\n", i);
buffer = alts->endpoint[i].extra;
buflen = alts->endpoint[i].extralen;
break;
@@ -675,8 +665,7 @@ static int uvc_parse_streaming(struct uvc_device *dev,
}
if (buflen <= 2) {
- uvc_trace(UVC_TRACE_DESCR, "no class-specific streaming "
- "interface descriptors found.\n");
+ uvc_trace(UVC_TRACE_DESCR, "no class-specific streaming interface descriptors found.\n");
goto error;
}
@@ -693,8 +682,7 @@ static int uvc_parse_streaming(struct uvc_device *dev,
break;
default:
- uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface "
- "%d HEADER descriptor not found.\n", dev->udev->devnum,
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface %d HEADER descriptor not found.\n", dev->udev->devnum,
alts->desc.bInterfaceNumber);
goto error;
}
@@ -703,8 +691,7 @@ static int uvc_parse_streaming(struct uvc_device *dev,
n = buflen >= size ? buffer[size-1] : 0;
if (buflen < size + p*n) {
- uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
- "interface %d HEADER descriptor is invalid.\n",
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface %d HEADER descriptor is invalid.\n",
dev->udev->devnum, alts->desc.bInterfaceNumber);
goto error;
}
@@ -755,8 +742,7 @@ static int uvc_parse_streaming(struct uvc_device *dev,
case UVC_VS_FORMAT_MPEG2TS:
case UVC_VS_FORMAT_STREAM_BASED:
- uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
- "interface %d FORMAT %u is not supported.\n",
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface %d FORMAT %u is not supported.\n",
dev->udev->devnum,
alts->desc.bInterfaceNumber, _buffer[2]);
break;
@@ -780,8 +766,7 @@ static int uvc_parse_streaming(struct uvc_device *dev,
}
if (nformats == 0) {
- uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface "
- "%d has no supported formats defined.\n",
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface %d has no supported formats defined.\n",
dev->udev->devnum, alts->desc.bInterfaceNumber);
goto error;
}
@@ -829,8 +814,7 @@ static int uvc_parse_streaming(struct uvc_device *dev,
}
if (buflen)
- uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface "
- "%d has %u bytes of trailing descriptor garbage.\n",
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface %d has %u bytes of trailing descriptor garbage.\n",
dev->udev->devnum, alts->desc.bInterfaceNumber, buflen);
/* Parse the alternate settings to find the maximum bandwidth. */
@@ -939,8 +923,7 @@ static int uvc_parse_vendor_control(struct uvc_device *dev,
n = buflen >= 25 + p ? buffer[22+p] : 0;
if (buflen < 25 + p + 2*n) {
- uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
- "interface %d EXTENSION_UNIT error\n",
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol interface %d EXTENSION_UNIT error\n",
udev->devnum, alts->desc.bInterfaceNumber);
break;
}
@@ -988,8 +971,7 @@ static int uvc_parse_standard_control(struct uvc_device *dev,
n = buflen >= 12 ? buffer[11] : 0;
if (buflen < 12 + n) {
- uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
- "interface %d HEADER error\n", udev->devnum,
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol interface %d HEADER error\n", udev->devnum,
alts->desc.bInterfaceNumber);
return -EINVAL;
}
@@ -1001,8 +983,7 @@ static int uvc_parse_standard_control(struct uvc_device *dev,
for (i = 0; i < n; ++i) {
intf = usb_ifnum_to_if(udev, buffer[12+i]);
if (intf == NULL) {
- uvc_trace(UVC_TRACE_DESCR, "device %d "
- "interface %d doesn't exists\n",
+ uvc_trace(UVC_TRACE_DESCR, "device %d interface %d doesn't exists\n",
udev->devnum, i);
continue;
}
@@ -1013,8 +994,7 @@ static int uvc_parse_standard_control(struct uvc_device *dev,
case UVC_VC_INPUT_TERMINAL:
if (buflen < 8) {
- uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
- "interface %d INPUT_TERMINAL error\n",
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol interface %d INPUT_TERMINAL error\n",
udev->devnum, alts->desc.bInterfaceNumber);
return -EINVAL;
}
@@ -1024,9 +1004,7 @@ static int uvc_parse_standard_control(struct uvc_device *dev,
*/
type = get_unaligned_le16(&buffer[4]);
if ((type & 0xff00) == 0) {
- uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
- "interface %d INPUT_TERMINAL %d has invalid "
- "type 0x%04x, skipping\n", udev->devnum,
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol interface %d INPUT_TERMINAL %d has invalid type 0x%04x, skipping\n", udev->devnum,
alts->desc.bInterfaceNumber,
buffer[3], type);
return 0;
@@ -1047,8 +1025,7 @@ static int uvc_parse_standard_control(struct uvc_device *dev,
}
if (buflen < len + n + p) {
- uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
- "interface %d INPUT_TERMINAL error\n",
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol interface %d INPUT_TERMINAL error\n",
udev->devnum, alts->desc.bInterfaceNumber);
return -EINVAL;
}
@@ -1094,8 +1071,7 @@ static int uvc_parse_standard_control(struct uvc_device *dev,
case UVC_VC_OUTPUT_TERMINAL:
if (buflen < 9) {
- uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
- "interface %d OUTPUT_TERMINAL error\n",
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol interface %d OUTPUT_TERMINAL error\n",
udev->devnum, alts->desc.bInterfaceNumber);
return -EINVAL;
}
@@ -1105,9 +1081,7 @@ static int uvc_parse_standard_control(struct uvc_device *dev,
*/
type = get_unaligned_le16(&buffer[4]);
if ((type & 0xff00) == 0) {
- uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
- "interface %d OUTPUT_TERMINAL %d has invalid "
- "type 0x%04x, skipping\n", udev->devnum,
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol interface %d OUTPUT_TERMINAL %d has invalid type 0x%04x, skipping\n", udev->devnum,
alts->desc.bInterfaceNumber, buffer[3], type);
return 0;
}
@@ -1132,8 +1106,7 @@ static int uvc_parse_standard_control(struct uvc_device *dev,
p = buflen >= 5 ? buffer[4] : 0;
if (buflen < 5 || buflen < 6 + p) {
- uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
- "interface %d SELECTOR_UNIT error\n",
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol interface %d SELECTOR_UNIT error\n",
udev->devnum, alts->desc.bInterfaceNumber);
return -EINVAL;
}
@@ -1158,8 +1131,7 @@ static int uvc_parse_standard_control(struct uvc_device *dev,
p = dev->uvc_version >= 0x0110 ? 10 : 9;
if (buflen < p + n) {
- uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
- "interface %d PROCESSING_UNIT error\n",
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol interface %d PROCESSING_UNIT error\n",
udev->devnum, alts->desc.bInterfaceNumber);
return -EINVAL;
}
@@ -1191,8 +1163,7 @@ static int uvc_parse_standard_control(struct uvc_device *dev,
n = buflen >= 24 + p ? buffer[22+p] : 0;
if (buflen < 24 + p + n) {
- uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
- "interface %d EXTENSION_UNIT error\n",
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol interface %d EXTENSION_UNIT error\n",
udev->devnum, alts->desc.bInterfaceNumber);
return -EINVAL;
}
@@ -1218,8 +1189,7 @@ static int uvc_parse_standard_control(struct uvc_device *dev,
break;
default:
- uvc_trace(UVC_TRACE_DESCR, "Found an unknown CS_INTERFACE "
- "descriptor (%u)\n", buffer[2]);
+ uvc_trace(UVC_TRACE_DESCR, "Found an unknown CS_INTERFACE descriptor (%u)\n", buffer[2]);
break;
}
@@ -1264,8 +1234,7 @@ static int uvc_parse_control(struct uvc_device *dev)
if (usb_endpoint_is_int_in(desc) &&
le16_to_cpu(desc->wMaxPacketSize) >= 8 &&
desc->bInterval != 0) {
- uvc_trace(UVC_TRACE_DESCR, "Found a Status endpoint "
- "(addr %02x).\n", desc->bEndpointAddress);
+ uvc_trace(UVC_TRACE_DESCR, "Found a Status endpoint (addr %02x).\n", desc->bEndpointAddress);
dev->int_ep = ep;
}
}
@@ -1312,8 +1281,7 @@ static int uvc_scan_chain_entity(struct uvc_video_chain *chain,
printk(KERN_CONT " <- XU %d", entity->id);
if (entity->bNrInPins != 1) {
- uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has more "
- "than 1 input pin.\n", entity->id);
+ uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has more than 1 input pin.\n", entity->id);
return -1;
}
@@ -1324,8 +1292,7 @@ static int uvc_scan_chain_entity(struct uvc_video_chain *chain,
printk(KERN_CONT " <- PU %d", entity->id);
if (chain->processing != NULL) {
- uvc_trace(UVC_TRACE_DESCR, "Found multiple "
- "Processing Units in chain.\n");
+ uvc_trace(UVC_TRACE_DESCR, "Found multiple Processing Units in chain.\n");
return -1;
}
@@ -1341,8 +1308,7 @@ static int uvc_scan_chain_entity(struct uvc_video_chain *chain,
break;
if (chain->selector != NULL) {
- uvc_trace(UVC_TRACE_DESCR, "Found multiple Selector "
- "Units in chain.\n");
+ uvc_trace(UVC_TRACE_DESCR, "Found multiple Selector Units in chain.\n");
return -1;
}
@@ -1377,8 +1343,7 @@ static int uvc_scan_chain_entity(struct uvc_video_chain *chain,
break;
default:
- uvc_trace(UVC_TRACE_DESCR, "Unsupported entity type "
- "0x%04x found in chain.\n", UVC_ENTITY_TYPE(entity));
+ uvc_trace(UVC_TRACE_DESCR, "Unsupported entity type 0x%04x found in chain.\n", UVC_ENTITY_TYPE(entity));
return -1;
}
@@ -1407,8 +1372,7 @@ static int uvc_scan_chain_forward(struct uvc_video_chain *chain,
switch (UVC_ENTITY_TYPE(forward)) {
case UVC_VC_EXTENSION_UNIT:
if (forward->bNrInPins != 1) {
- uvc_trace(UVC_TRACE_DESCR, "Extension unit %d "
- "has more than 1 input pin.\n",
+ uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has more than 1 input pin.\n",
entity->id);
return -EINVAL;
}
@@ -1428,8 +1392,7 @@ static int uvc_scan_chain_forward(struct uvc_video_chain *chain,
case UVC_OTT_MEDIA_TRANSPORT_OUTPUT:
case UVC_TT_STREAMING:
if (UVC_ENTITY_IS_ITERM(forward)) {
- uvc_trace(UVC_TRACE_DESCR, "Unsupported input "
- "terminal %u.\n", forward->id);
+ uvc_trace(UVC_TRACE_DESCR, "Unsupported input terminal %u.\n", forward->id);
return -EINVAL;
}
@@ -1478,9 +1441,7 @@ static int uvc_scan_chain_backward(struct uvc_video_chain *chain,
id = entity->baSourceID[i];
term = uvc_entity_by_id(chain->dev, id);
if (term == NULL || !UVC_ENTITY_IS_ITERM(term)) {
- uvc_trace(UVC_TRACE_DESCR, "Selector unit %d "
- "input %d isn't connected to an "
- "input terminal\n", entity->id, i);
+ uvc_trace(UVC_TRACE_DESCR, "Selector unit %d input %d isn't connected to an input terminal\n", entity->id, i);
return -1;
}
@@ -1515,8 +1476,7 @@ static int uvc_scan_chain_backward(struct uvc_video_chain *chain,
entity = uvc_entity_by_id(chain->dev, id);
if (entity == NULL) {
- uvc_trace(UVC_TRACE_DESCR, "Found reference to "
- "unknown entity %d.\n", id);
+ uvc_trace(UVC_TRACE_DESCR, "Found reference to unknown entity %d.\n", id);
return -EINVAL;
}
@@ -1537,8 +1497,7 @@ static int uvc_scan_chain(struct uvc_video_chain *chain,
while (entity != NULL) {
/* Entity must not be part of an existing chain */
if (entity->chain.next || entity->chain.prev) {
- uvc_trace(UVC_TRACE_DESCR, "Found reference to "
- "entity %d already in chain.\n", entity->id);
+ uvc_trace(UVC_TRACE_DESCR, "Found reference to entity %d already in chain.\n", entity->id);
return -EINVAL;
}
@@ -1766,8 +1725,7 @@ static int uvc_register_video(struct uvc_device *dev,
*/
ret = uvc_video_init(stream);
if (ret < 0) {
- uvc_printk(KERN_ERR, "Failed to initialize the device "
- "(%d).\n", ret);
+ uvc_printk(KERN_ERR, "Failed to initialize the device (%d).\n", ret);
return ret;
}
@@ -1825,8 +1783,7 @@ static int uvc_register_terms(struct uvc_device *dev,
stream = uvc_stream_by_id(dev, term->id);
if (stream == NULL) {
- uvc_printk(KERN_INFO, "No streaming interface found "
- "for terminal %u.", term->id);
+ uvc_printk(KERN_INFO, "No streaming interface found for terminal %u.", term->id);
continue;
}
@@ -1854,8 +1811,7 @@ static int uvc_register_chains(struct uvc_device *dev)
#ifdef CONFIG_MEDIA_CONTROLLER
ret = uvc_mc_register_entities(chain);
if (ret < 0) {
- uvc_printk(KERN_INFO, "Failed to register entites "
- "(%d).\n", ret);
+ uvc_printk(KERN_INFO, "Failed to register entites (%d).\n", ret);
}
#endif
}
@@ -1875,8 +1831,7 @@ static int uvc_probe(struct usb_interface *intf,
int ret;
if (id->idVendor && id->idProduct)
- uvc_trace(UVC_TRACE_PROBE, "Probing known UVC device %s "
- "(%04x:%04x)\n", udev->devpath, id->idVendor,
+ uvc_trace(UVC_TRACE_PROBE, "Probing known UVC device %s (%04x:%04x)\n", udev->devpath, id->idVendor,
id->idProduct);
else
uvc_trace(UVC_TRACE_PROBE, "Probing generic UVC device %s\n",
@@ -1909,8 +1864,7 @@ static int uvc_probe(struct usb_interface *intf,
/* Parse the Video Class control descriptor. */
if (uvc_parse_control(dev) < 0) {
- uvc_trace(UVC_TRACE_PROBE, "Unable to parse UVC "
- "descriptors.\n");
+ uvc_trace(UVC_TRACE_PROBE, "Unable to parse UVC descriptors.\n");
goto error;
}
@@ -1921,10 +1875,8 @@ static int uvc_probe(struct usb_interface *intf,
le16_to_cpu(udev->descriptor.idProduct));
if (dev->quirks != id->driver_info) {
- uvc_printk(KERN_INFO, "Forcing device quirks to 0x%x by module "
- "parameter for testing purpose.\n", dev->quirks);
- uvc_printk(KERN_INFO, "Please report required quirks to the "
- "linux-uvc-devel mailing list.\n");
+ uvc_printk(KERN_INFO, "Forcing device quirks to 0x%x by module parameter for testing purpose.\n", dev->quirks);
+ uvc_printk(KERN_INFO, "Please report required quirks to the linux-uvc-devel mailing list.\n");
}
/* Initialize the media device and register the V4L2 device. */
@@ -1966,9 +1918,7 @@ static int uvc_probe(struct usb_interface *intf,
/* Initialize the interrupt URB. */
if ((ret = uvc_status_init(dev)) < 0) {
- uvc_printk(KERN_INFO, "Unable to initialize the status "
- "endpoint (%d), status interrupt will not be "
- "supported.\n", ret);
+ uvc_printk(KERN_INFO, "Unable to initialize the status endpoint (%d), status interrupt will not be supported.\n", ret);
}
uvc_trace(UVC_TRACE_PROBE, "UVC device initialized.\n");
@@ -2019,8 +1969,7 @@ static int uvc_suspend(struct usb_interface *intf, pm_message_t message)
return uvc_video_suspend(stream);
}
- uvc_trace(UVC_TRACE_SUSPEND, "Suspend: video streaming USB interface "
- "mismatch.\n");
+ uvc_trace(UVC_TRACE_SUSPEND, "Suspend: video streaming USB interface mismatch.\n");
return -EINVAL;
}
@@ -2059,8 +2008,7 @@ static int __uvc_resume(struct usb_interface *intf, int reset)
}
}
- uvc_trace(UVC_TRACE_SUSPEND, "Resume: video streaming USB interface "
- "mismatch.\n");
+ uvc_trace(UVC_TRACE_SUSPEND, "Resume: video streaming USB interface mismatch.\n");
return -EINVAL;
}
diff --git a/drivers/media/usb/uvc/uvc_entity.c b/drivers/media/usb/uvc/uvc_entity.c
index ac386bb547e6..503bd3a2e298 100644
--- a/drivers/media/usb/uvc/uvc_entity.c
+++ b/drivers/media/usb/uvc/uvc_entity.c
@@ -109,8 +109,7 @@ int uvc_mc_register_entities(struct uvc_video_chain *chain)
list_for_each_entry(entity, &chain->entities, chain) {
ret = uvc_mc_init_entity(chain, entity);
if (ret < 0) {
- uvc_printk(KERN_INFO, "Failed to initialize entity for "
- "entity %u\n", entity->id);
+ uvc_printk(KERN_INFO, "Failed to initialize entity for entity %u\n", entity->id);
return ret;
}
}
@@ -118,8 +117,7 @@ int uvc_mc_register_entities(struct uvc_video_chain *chain)
list_for_each_entry(entity, &chain->entities, chain) {
ret = uvc_mc_create_links(chain, entity);
if (ret < 0) {
- uvc_printk(KERN_INFO, "Failed to create links for "
- "entity %u\n", entity->id);
+ uvc_printk(KERN_INFO, "Failed to create links for entity %u\n", entity->id);
return ret;
}
}
diff --git a/drivers/media/usb/uvc/uvc_isight.c b/drivers/media/usb/uvc/uvc_isight.c
index 8510e7259e76..e510be6431d4 100644
--- a/drivers/media/usb/uvc/uvc_isight.c
+++ b/drivers/media/usb/uvc/uvc_isight.c
@@ -61,8 +61,7 @@ static int isight_decode(struct uvc_video_queue *queue, struct uvc_buffer *buf,
/* Synchronize to the input stream by waiting for a header packet. */
if (buf->state != UVC_BUF_STATE_ACTIVE) {
if (!is_header) {
- uvc_trace(UVC_TRACE_FRAME, "Dropping packet (out of "
- "sync).\n");
+ uvc_trace(UVC_TRACE_FRAME, "Dropping packet (out of sync).\n");
return 0;
}
@@ -90,8 +89,7 @@ static int isight_decode(struct uvc_video_queue *queue, struct uvc_buffer *buf,
buf->bytesused += nbytes;
if (len > maxlen || buf->bytesused == buf->length) {
- uvc_trace(UVC_TRACE_FRAME, "Frame complete "
- "(overflow).\n");
+ uvc_trace(UVC_TRACE_FRAME, "Frame complete (overflow).\n");
buf->state = UVC_BUF_STATE_DONE;
}
}
@@ -106,8 +104,7 @@ void uvc_video_decode_isight(struct urb *urb, struct uvc_streaming *stream,
for (i = 0; i < urb->number_of_packets; ++i) {
if (urb->iso_frame_desc[i].status < 0) {
- uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame "
- "lost (%d).\n",
+ uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame lost (%d).\n",
urb->iso_frame_desc[i].status);
}
diff --git a/drivers/media/usb/uvc/uvc_status.c b/drivers/media/usb/uvc/uvc_status.c
index f552ab997956..16adf094447d 100644
--- a/drivers/media/usb/uvc/uvc_status.c
+++ b/drivers/media/usb/uvc/uvc_status.c
@@ -81,8 +81,7 @@ static void uvc_input_report_key(struct uvc_device *dev, unsigned int code,
static void uvc_event_streaming(struct uvc_device *dev, __u8 *data, int len)
{
if (len < 3) {
- uvc_trace(UVC_TRACE_STATUS, "Invalid streaming status event "
- "received.\n");
+ uvc_trace(UVC_TRACE_STATUS, "Invalid streaming status event received.\n");
return;
}
@@ -93,8 +92,7 @@ static void uvc_event_streaming(struct uvc_device *dev, __u8 *data, int len)
data[1], data[3] ? "pressed" : "released", len);
uvc_input_report_key(dev, KEY_CAMERA, data[3]);
} else {
- uvc_trace(UVC_TRACE_STATUS, "Stream %u error event %02x %02x "
- "len %d.\n", data[1], data[2], data[3], len);
+ uvc_trace(UVC_TRACE_STATUS, "Stream %u error event %02x %02x len %d.\n", data[1], data[2], data[3], len);
}
}
@@ -103,8 +101,7 @@ static void uvc_event_control(struct uvc_device *dev, __u8 *data, int len)
char *attrs[3] = { "value", "info", "failure" };
if (len < 6 || data[2] != 0 || data[4] > 2) {
- uvc_trace(UVC_TRACE_STATUS, "Invalid control status event "
- "received.\n");
+ uvc_trace(UVC_TRACE_STATUS, "Invalid control status event received.\n");
return;
}
@@ -129,8 +126,7 @@ static void uvc_status_complete(struct urb *urb)
return;
default:
- uvc_printk(KERN_WARNING, "Non-zero status (%d) in status "
- "completion handler.\n", urb->status);
+ uvc_printk(KERN_WARNING, "Non-zero status (%d) in status completion handler.\n", urb->status);
return;
}
@@ -146,8 +142,7 @@ static void uvc_status_complete(struct urb *urb)
break;
default:
- uvc_trace(UVC_TRACE_STATUS, "Unknown status event "
- "type %u.\n", dev->status[0]);
+ uvc_trace(UVC_TRACE_STATUS, "Unknown status event type %u.\n", dev->status[0]);
break;
}
}
diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c
index 05eed4be25df..457a26b32310 100644
--- a/drivers/media/usb/uvc/uvc_v4l2.c
+++ b/drivers/media/usb/uvc/uvc_v4l2.c
@@ -85,8 +85,7 @@ static int uvc_ioctl_ctrl_map(struct uvc_video_chain *chain,
break;
default:
- uvc_trace(UVC_TRACE_CONTROL, "Unsupported V4L2 control type "
- "%u.\n", xmap->v4l2_type);
+ uvc_trace(UVC_TRACE_CONTROL, "Unsupported V4L2 control type %u.\n", xmap->v4l2_type);
ret = -ENOTTY;
goto done;
}
@@ -224,8 +223,7 @@ static int uvc_v4l2_try_format(struct uvc_streaming *stream,
/* Use the default frame interval. */
interval = frame->dwDefaultFrameInterval;
- uvc_trace(UVC_TRACE_FORMAT, "Using default frame interval %u.%u us "
- "(%u.%u fps).\n", interval/10, interval%10, 10000000/interval,
+ uvc_trace(UVC_TRACE_FORMAT, "Using default frame interval %u.%u us (%u.%u fps).\n", interval/10, interval%10, 10000000/interval,
(100000000/interval)%10);
/* Set the format index, frame index and frame interval. */
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index b5589d5f5da4..4ce767e44ccf 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -77,8 +77,7 @@ int uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit,
ret = __uvc_query_ctrl(dev, query, unit, intfnum, cs, data, size,
UVC_CTRL_CONTROL_TIMEOUT);
if (ret != size) {
- uvc_printk(KERN_ERR, "Failed to query (%s) UVC control %u on "
- "unit %u: %d (exp. %u).\n", uvc_query_name(query), cs,
+ uvc_printk(KERN_ERR, "Failed to query (%s) UVC control %u on unit %u: %d (exp. %u).\n", uvc_query_name(query), cs,
unit, ret, size);
return -EIO;
}
@@ -188,9 +187,7 @@ static int uvc_get_video_ctrl(struct uvc_streaming *stream,
* answer a GET_MIN or GET_MAX request with the wCompQuality
* field only.
*/
- uvc_warn_once(stream->dev, UVC_WARN_MINMAX, "UVC non "
- "compliance - GET_MIN/MAX(PROBE) incorrectly "
- "supported. Enabling workaround.\n");
+ uvc_warn_once(stream->dev, UVC_WARN_MINMAX, "UVC non compliance - GET_MIN/MAX(PROBE) incorrectly supported. Enabling workaround.\n");
memset(ctrl, 0, sizeof *ctrl);
ctrl->wCompQuality = le16_to_cpup((__le16 *)data);
ret = 0;
@@ -200,14 +197,11 @@ static int uvc_get_video_ctrl(struct uvc_streaming *stream,
* video probe control. Warn once and return, the caller will
* fall back to GET_CUR.
*/
- uvc_warn_once(stream->dev, UVC_WARN_PROBE_DEF, "UVC non "
- "compliance - GET_DEF(PROBE) not supported. "
- "Enabling workaround.\n");
+ uvc_warn_once(stream->dev, UVC_WARN_PROBE_DEF, "UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.\n");
ret = -EIO;
goto out;
} else if (ret != size) {
- uvc_printk(KERN_ERR, "Failed to query (%u) UVC %s control : "
- "%d (exp. %u).\n", query, probe ? "probe" : "commit",
+ uvc_printk(KERN_ERR, "Failed to query (%u) UVC %s control : %d (exp. %u).\n", query, probe ? "probe" : "commit",
ret, size);
ret = -EIO;
goto out;
@@ -287,8 +281,7 @@ static int uvc_set_video_ctrl(struct uvc_streaming *stream,
probe ? UVC_VS_PROBE_CONTROL : UVC_VS_COMMIT_CONTROL, data,
size, uvc_timeout_param);
if (ret != size) {
- uvc_printk(KERN_ERR, "Failed to set UVC %s control : "
- "%d (exp. %u).\n", probe ? "probe" : "commit",
+ uvc_printk(KERN_ERR, "Failed to set UVC %s control : %d (exp. %u).\n", probe ? "probe" : "commit",
ret, size);
ret = -EIO;
}
@@ -652,8 +645,7 @@ void uvc_video_clock_update(struct uvc_streaming *stream,
sof = y;
- uvc_trace(UVC_TRACE_CLOCK, "%s: PTS %u y %llu.%06llu SOF %u.%06llu "
- "(x1 %u x2 %u y1 %u y2 %u SOF offset %u)\n",
+ uvc_trace(UVC_TRACE_CLOCK, "%s: PTS %u y %llu.%06llu SOF %u.%06llu (x1 %u x2 %u y1 %u y2 %u SOF offset %u)\n",
stream->dev->name, buf->pts,
y >> 16, div_u64((y & 0xffff) * 1000000, 65536),
sof >> 16, div_u64(((u64)sof & 0xffff) * 1000000LLU, 65536),
@@ -694,8 +686,7 @@ void uvc_video_clock_update(struct uvc_streaming *stream,
ts.tv_nsec -= NSEC_PER_SEC;
}
- uvc_trace(UVC_TRACE_CLOCK, "%s: SOF %u.%06llu y %llu ts %llu "
- "buf ts %llu (x1 %u/%u/%u x2 %u/%u/%u y1 %u y2 %u)\n",
+ uvc_trace(UVC_TRACE_CLOCK, "%s: SOF %u.%06llu y %llu ts %llu buf ts %llu (x1 %u/%u/%u x2 %u/%u/%u y1 %u y2 %u)\n",
stream->dev->name,
sof >> 16, div_u64(((u64)sof & 0xffff) * 1000000LLU, 65536),
y, timespec_to_ns(&ts), vbuf->vb2_buf.timestamp,
@@ -829,9 +820,7 @@ static void uvc_video_stats_update(struct uvc_streaming *stream)
{
struct uvc_stats_frame *frame = &stream->stats.frame;
- uvc_trace(UVC_TRACE_STATS, "frame %u stats: %u/%u/%u packets, "
- "%u/%u/%u pts (%searly %sinitial), %u/%u scr, "
- "last pts/stc/sof %u/%u/%u\n",
+ uvc_trace(UVC_TRACE_STATS, "frame %u stats: %u/%u/%u packets, %u/%u/%u pts (%searly %sinitial), %u/%u scr, last pts/stc/sof %u/%u/%u\n",
stream->sequence, frame->first_data,
frame->nb_packets - frame->nb_empty, frame->nb_packets,
frame->nb_pts_diffs, frame->last_pts_diff, frame->nb_pts,
@@ -1002,8 +991,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream,
/* Mark the buffer as bad if the error bit is set. */
if (data[1] & UVC_STREAM_ERR) {
- uvc_trace(UVC_TRACE_FRAME, "Marking buffer as bad (error bit "
- "set).\n");
+ uvc_trace(UVC_TRACE_FRAME, "Marking buffer as bad (error bit set).\n");
buf->error = 1;
}
@@ -1019,8 +1007,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream,
struct timespec ts;
if (fid == stream->last_fid) {
- uvc_trace(UVC_TRACE_FRAME, "Dropping payload (out of "
- "sync).\n");
+ uvc_trace(UVC_TRACE_FRAME, "Dropping payload (out of sync).\n");
if ((stream->dev->quirks & UVC_QUIRK_STREAM_NO_FID) &&
(data[1] & UVC_STREAM_EOF))
stream->last_fid ^= UVC_STREAM_FID;
@@ -1053,8 +1040,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream,
* previous payload had the EOF bit set.
*/
if (fid != stream->last_fid && buf->bytesused != 0) {
- uvc_trace(UVC_TRACE_FRAME, "Frame complete (FID bit "
- "toggled).\n");
+ uvc_trace(UVC_TRACE_FRAME, "Frame complete (FID bit toggled).\n");
buf->state = UVC_BUF_STATE_READY;
return -EAGAIN;
}
@@ -1166,8 +1152,7 @@ static void uvc_video_decode_isoc(struct urb *urb, struct uvc_streaming *stream,
for (i = 0; i < urb->number_of_packets; ++i) {
if (urb->iso_frame_desc[i].status < 0) {
- uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame "
- "lost (%d).\n", urb->iso_frame_desc[i].status);
+ uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame lost (%d).\n", urb->iso_frame_desc[i].status);
/* Mark the buffer as faulty. */
if (buf != NULL)
buf->error = 1;
@@ -1328,8 +1313,7 @@ static void uvc_video_complete(struct urb *urb)
break;
default:
- uvc_printk(KERN_WARNING, "Non-zero status (%d) in video "
- "completion handler.\n", urb->status);
+ uvc_printk(KERN_WARNING, "Non-zero status (%d) in video completion handler.\n", urb->status);
case -ENOENT: /* usb_kill_urb() called. */
if (stream->frozen)
@@ -1424,15 +1408,13 @@ static int uvc_alloc_urb_buffers(struct uvc_streaming *stream,
}
if (i == UVC_URBS) {
- uvc_trace(UVC_TRACE_VIDEO, "Allocated %u URB buffers "
- "of %ux%u bytes each.\n", UVC_URBS, npackets,
+ uvc_trace(UVC_TRACE_VIDEO, "Allocated %u URB buffers of %ux%u bytes each.\n", UVC_URBS, npackets,
psize);
return npackets;
}
}
- uvc_trace(UVC_TRACE_VIDEO, "Failed to allocate URB buffers (%u bytes "
- "per packet).\n", psize);
+ uvc_trace(UVC_TRACE_VIDEO, "Failed to allocate URB buffers (%u bytes per packet).\n", psize);
return 0;
}
@@ -1621,12 +1603,10 @@ static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags)
bandwidth = stream->ctrl.dwMaxPayloadTransferSize;
if (bandwidth == 0) {
- uvc_trace(UVC_TRACE_VIDEO, "Device requested null "
- "bandwidth, defaulting to lowest.\n");
+ uvc_trace(UVC_TRACE_VIDEO, "Device requested null bandwidth, defaulting to lowest.\n");
bandwidth = 1;
} else {
- uvc_trace(UVC_TRACE_VIDEO, "Device requested %u "
- "B/frame bandwidth.\n", bandwidth);
+ uvc_trace(UVC_TRACE_VIDEO, "Device requested %u B/frame bandwidth.\n", bandwidth);
}
for (i = 0; i < intf->num_altsetting; ++i) {
@@ -1649,13 +1629,11 @@ static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags)
}
if (best_ep == NULL) {
- uvc_trace(UVC_TRACE_VIDEO, "No fast enough alt setting "
- "for requested bandwidth.\n");
+ uvc_trace(UVC_TRACE_VIDEO, "No fast enough alt setting for requested bandwidth.\n");
return -EIO;
}
- uvc_trace(UVC_TRACE_VIDEO, "Selecting alternate setting %u "
- "(%u B/frame bandwidth).\n", altsetting, best_psize);
+ uvc_trace(UVC_TRACE_VIDEO, "Selecting alternate setting %u (%u B/frame bandwidth).\n", altsetting, best_psize);
ret = usb_set_interface(stream->dev->udev, intfnum, altsetting);
if (ret < 0)
@@ -1679,8 +1657,7 @@ static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags)
for (i = 0; i < UVC_URBS; ++i) {
ret = usb_submit_urb(stream->urb[i], gfp_flags);
if (ret < 0) {
- uvc_printk(KERN_ERR, "Failed to submit URB %u "
- "(%d).\n", i, ret);
+ uvc_printk(KERN_ERR, "Failed to submit URB %u (%d).\n", i, ret);
uvc_uninit_video(stream, 1);
return ret;
}
@@ -1814,8 +1791,7 @@ int uvc_video_init(struct uvc_streaming *stream)
}
if (format->nframes == 0) {
- uvc_printk(KERN_INFO, "No frame descriptor found for the "
- "default format.\n");
+ uvc_printk(KERN_INFO, "No frame descriptor found for the default format.\n");
return -EINVAL;
}
@@ -1849,8 +1825,7 @@ int uvc_video_init(struct uvc_streaming *stream)
if (stream->intf->num_altsetting == 1)
stream->decode = uvc_video_encode_bulk;
else {
- uvc_printk(KERN_INFO, "Isochronous endpoints are not "
- "supported for video output devices.\n");
+ uvc_printk(KERN_INFO, "Isochronous endpoints are not supported for video output devices.\n");
return -EINVAL;
}
}
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* Re: [PATCH 49/57] [media] uvc: don't break long lines
2016-10-14 20:20 ` [PATCH 49/57] [media] uvc: " Mauro Carvalho Chehab
@ 2016-10-17 13:49 ` Laurent Pinchart
0 siblings, 0 replies; 79+ messages in thread
From: Laurent Pinchart @ 2016-10-17 13:49 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Media Mailing List, Mauro Carvalho Chehab, Mauro Carvalho Chehab
Hi Mauro,
Thank you for the patch.
Same comment, please add line breaks where applicable.
On Friday 14 Oct 2016 17:20:37 Mauro Carvalho Chehab wrote:
> Due to the 80-cols checkpatch warnings, several strings
> were broken into multiple lines. This is not considered
> a good practice anymore, as it makes harder to grep for
> strings at the source code. So, join those continuation
> lines.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
> ---
> drivers/media/usb/uvc/uvc_ctrl.c | 24 ++----
> drivers/media/usb/uvc/uvc_debugfs.c | 3 +-
> drivers/media/usb/uvc/uvc_driver.c | 148 ++++++++++----------------------
> drivers/media/usb/uvc/uvc_entity.c | 6 +-
> drivers/media/usb/uvc/uvc_isight.c | 9 +--
> drivers/media/usb/uvc/uvc_status.c | 15 ++--
> drivers/media/usb/uvc/uvc_v4l2.c | 6 +-
> drivers/media/usb/uvc/uvc_video.c | 69 ++++++-----------
> 8 files changed, 91 insertions(+), 189 deletions(-)
>
> diff --git a/drivers/media/usb/uvc/uvc_ctrl.c
> b/drivers/media/usb/uvc/uvc_ctrl.c index c2ee6e39fd0c..6f26451bcb75 100644
> --- a/drivers/media/usb/uvc/uvc_ctrl.c
> +++ b/drivers/media/usb/uvc/uvc_ctrl.c
> @@ -960,8 +960,7 @@ static int uvc_ctrl_populate_cache(struct
> uvc_video_chain *chain, * resolution value to zero.
> */
> uvc_warn_once(chain->dev, UVC_WARN_XU_GET_RES,
> - "UVC non compliance - GET_RES failed on
"
> - "an XU control. Enabling workaround.
\n");
> + "UVC non compliance - GET_RES failed on
an XU control. Enabling
> workaround.\n"); memset(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_RES), 0,
> ctrl->info.size);
> }
> @@ -1680,8 +1679,7 @@ static int uvc_ctrl_fill_xu_info(struct uvc_device
> *dev,
>
> uvc_ctrl_fixup_xu_info(dev, ctrl, info);
>
> - uvc_trace(UVC_TRACE_CONTROL, "XU control %pUl/%u queried: len %u, "
> - "flags { get %u set %u auto %u }.\n",
> + uvc_trace(UVC_TRACE_CONTROL, "XU control %pUl/%u queried: len %u,
flags {
> get %u set %u auto %u }.\n", info->entity, info->selector, info->size,
> (info->flags & UVC_CTRL_FLAG_GET_CUR) ? 1 : 0,
> (info->flags & UVC_CTRL_FLAG_SET_CUR) ? 1 : 0,
> @@ -1710,8 +1708,7 @@ static int uvc_ctrl_init_xu_ctrl(struct uvc_device
> *dev,
>
> ret = uvc_ctrl_add_info(dev, ctrl, &info);
> if (ret < 0)
> - uvc_trace(UVC_TRACE_CONTROL, "Failed to initialize control "
> - "%pUl/%u on device %s entity %u\n", info.entity,
> + uvc_trace(UVC_TRACE_CONTROL, "Failed to initialize control
%pUl/%u on
> device %s entity %u\n", info.entity, info.selector, dev->udev->devpath,
> ctrl->entity->id);
>
> return ret;
> @@ -1904,8 +1901,7 @@ static int uvc_ctrl_add_info(struct uvc_device *dev,
> struct uvc_control *ctrl,
>
> ctrl->initialized = 1;
>
> - uvc_trace(UVC_TRACE_CONTROL, "Added control %pUl/%u to device %s "
> - "entity %u\n", ctrl->info.entity, ctrl->info.selector,
> + uvc_trace(UVC_TRACE_CONTROL, "Added control %pUl/%u to device %s
entity
> %u\n", ctrl->info.entity, ctrl->info.selector, dev->udev->devpath,
> ctrl->entity->id);
>
> done:
> @@ -1964,8 +1960,7 @@ int uvc_ctrl_add_mapping(struct uvc_video_chain
> *chain, int ret;
>
> if (mapping->id & ~V4L2_CTRL_ID_MASK) {
> - uvc_trace(UVC_TRACE_CONTROL, "Can't add mapping '%s', control
"
> - "id 0x%08x is invalid.\n", mapping->name,
> + uvc_trace(UVC_TRACE_CONTROL, "Can't add mapping '%s', control
id 0x%08x
> is invalid.\n", mapping->name, mapping->id);
> return -EINVAL;
> }
> @@ -2004,8 +1999,7 @@ int uvc_ctrl_add_mapping(struct uvc_video_chain
> *chain,
>
> list_for_each_entry(map, &ctrl->info.mappings, list) {
> if (mapping->id == map->id) {
> - uvc_trace(UVC_TRACE_CONTROL, "Can't add mapping '%s',
"
> - "control id 0x%08x already exists.\n",
> + uvc_trace(UVC_TRACE_CONTROL, "Can't add mapping '%s',
control id 0x%08x
> already exists.\n", mapping->name, mapping->id);
> ret = -EEXIST;
> goto done;
> @@ -2015,8 +2009,7 @@ int uvc_ctrl_add_mapping(struct uvc_video_chain
> *chain, /* Prevent excess memory consumption */
> if (atomic_inc_return(&dev->nmappings) > UVC_MAX_CONTROL_MAPPINGS) {
> atomic_dec(&dev->nmappings);
> - uvc_trace(UVC_TRACE_CONTROL, "Can't add mapping '%s', maximum
"
> - "mappings count (%u) exceeded.\n", mapping->name,
> + uvc_trace(UVC_TRACE_CONTROL, "Can't add mapping '%s', maximum
mappings
> count (%u) exceeded.\n", mapping->name, UVC_MAX_CONTROL_MAPPINGS);
> ret = -ENOMEM;
> goto done;
> @@ -2086,8 +2079,7 @@ static void uvc_ctrl_prune_entity(struct uvc_device
> *dev, !uvc_test_bit(controls, blacklist[i].index))
> continue;
>
> - uvc_trace(UVC_TRACE_CONTROL, "%u/%u control is black listed, "
> - "removing it.\n", entity->id, blacklist[i].index);
> + uvc_trace(UVC_TRACE_CONTROL, "%u/%u control is black listed,
removing
> it.\n", entity->id, blacklist[i].index);
>
> uvc_clear_bit(controls, blacklist[i].index);
> }
> diff --git a/drivers/media/usb/uvc/uvc_debugfs.c
> b/drivers/media/usb/uvc/uvc_debugfs.c index 14561a5abb79..bf6c82e73d5f
> 100644
> --- a/drivers/media/usb/uvc/uvc_debugfs.c
> +++ b/drivers/media/usb/uvc/uvc_debugfs.c
> @@ -88,8 +88,7 @@ int uvc_debugfs_init_stream(struct uvc_streaming *stream)
>
> dent = debugfs_create_dir(dir_name, uvc_debugfs_root_dir);
> if (IS_ERR_OR_NULL(dent)) {
> - uvc_printk(KERN_INFO, "Unable to create debugfs %s "
> - "directory.\n", dir_name);
> + uvc_printk(KERN_INFO, "Unable to create debugfs %s directory.
\n",
> dir_name); return -ENODEV;
> }
>
> diff --git a/drivers/media/usb/uvc/uvc_driver.c
> b/drivers/media/usb/uvc/uvc_driver.c index 9c4b56b4a9c6..aaff330e147f
> 100644
> --- a/drivers/media/usb/uvc/uvc_driver.c
> +++ b/drivers/media/usb/uvc/uvc_driver.c
> @@ -370,8 +370,7 @@ static int uvc_parse_format(struct uvc_device *dev,
> case UVC_VS_FORMAT_FRAME_BASED:
> n = buffer[2] == UVC_VS_FORMAT_UNCOMPRESSED ? 27 : 28;
> if (buflen < n) {
> - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
> - "interface %d FORMAT error\n",
> + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming
interface %d FORMAT
> error\n", dev->udev->devnum,
> alts->desc.bInterfaceNumber);
> return -EINVAL;
> @@ -418,8 +417,7 @@ static int uvc_parse_format(struct uvc_device *dev,
>
> case UVC_VS_FORMAT_MJPEG:
> if (buflen < 11) {
> - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
> - "interface %d FORMAT error\n",
> + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming
interface %d FORMAT
> error\n", dev->udev->devnum,
> alts->desc.bInterfaceNumber);
> return -EINVAL;
> @@ -434,8 +432,7 @@ static int uvc_parse_format(struct uvc_device *dev,
>
> case UVC_VS_FORMAT_DV:
> if (buflen < 9) {
> - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
> - "interface %d FORMAT error\n",
> + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming
interface %d FORMAT
> error\n", dev->udev->devnum,
> alts->desc.bInterfaceNumber);
> return -EINVAL;
> @@ -452,8 +449,7 @@ static int uvc_parse_format(struct uvc_device *dev,
> strlcpy(format->name, "HD-DV", sizeof format->name);
> break;
> default:
> - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
> - "interface %d: unknown DV format %u\n",
> + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming
interface %d:
> unknown DV format %u\n", dev->udev->devnum,
> alts->desc.bInterfaceNumber, buffer[8]);
> return -EINVAL;
> @@ -481,8 +477,7 @@ static int uvc_parse_format(struct uvc_device *dev,
> case UVC_VS_FORMAT_STREAM_BASED:
> /* Not supported yet. */
> default:
> - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
> - "interface %d unsupported format %u\n",
> + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface
%d
> unsupported format %u\n", dev->udev->devnum, alts->desc.bInterfaceNumber,
> buffer[2]);
> return -EINVAL;
> @@ -507,8 +502,7 @@ static int uvc_parse_format(struct uvc_device *dev,
> n = n ? n : 3;
>
> if (buflen < 26 + 4*n) {
> - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
> - "interface %d FRAME error\n", dev->udev-
>devnum,
> + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming
interface %d FRAME
> error\n", dev->udev->devnum, alts->desc.bInterfaceNumber);
> return -EINVAL;
> }
> @@ -590,8 +584,7 @@ static int uvc_parse_format(struct uvc_device *dev,
> if (buflen > 2 && buffer[1] == USB_DT_CS_INTERFACE &&
> buffer[2] == UVC_VS_COLORFORMAT) {
> if (buflen < 6) {
> - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
> - "interface %d COLORFORMAT error\n",
> + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming
interface %d
> COLORFORMAT error\n", dev->udev->devnum,
> alts->desc.bInterfaceNumber);
> return -EINVAL;
> @@ -623,15 +616,13 @@ static int uvc_parse_streaming(struct uvc_device *dev,
>
> if (intf->cur_altsetting->desc.bInterfaceSubClass
> != UVC_SC_VIDEOSTREAMING) {
> - uvc_trace(UVC_TRACE_DESCR, "device %d interface %d isn't a "
> - "video streaming interface\n", dev->udev->devnum,
> + uvc_trace(UVC_TRACE_DESCR, "device %d interface %d isn't a
video
> streaming interface\n", dev->udev->devnum,
> intf->altsetting[0].desc.bInterfaceNumber);
> return -EINVAL;
> }
>
> if (usb_driver_claim_interface(&uvc_driver.driver, intf, dev)) {
> - uvc_trace(UVC_TRACE_DESCR, "device %d interface %d is already
"
> - "claimed\n", dev->udev->devnum,
> + uvc_trace(UVC_TRACE_DESCR, "device %d interface %d is already
claimed\n",
> dev->udev->devnum, intf->altsetting[0].desc.bInterfaceNumber);
> return -EINVAL;
> }
> @@ -659,8 +650,7 @@ static int uvc_parse_streaming(struct uvc_device *dev,
>
> if (ep->extralen > 2 &&
> ep->extra[1] == USB_DT_CS_INTERFACE) {
> - uvc_trace(UVC_TRACE_DESCR, "trying extra data
"
> - "from endpoint %u.\n", i);
> + uvc_trace(UVC_TRACE_DESCR, "trying extra data
from endpoint %u.\n", i);
> buffer = alts->endpoint[i].extra;
> buflen = alts->endpoint[i].extralen;
> break;
> @@ -675,8 +665,7 @@ static int uvc_parse_streaming(struct uvc_device *dev,
> }
>
> if (buflen <= 2) {
> - uvc_trace(UVC_TRACE_DESCR, "no class-specific streaming "
> - "interface descriptors found.\n");
> + uvc_trace(UVC_TRACE_DESCR, "no class-specific streaming
interface
> descriptors found.\n"); goto error;
> }
>
> @@ -693,8 +682,7 @@ static int uvc_parse_streaming(struct uvc_device *dev,
> break;
>
> default:
> - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface
"
> - "%d HEADER descriptor not found.\n", dev->udev-
>devnum,
> + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface
%d HEADER
> descriptor not found.\n", dev->udev->devnum, alts->desc.bInterfaceNumber);
> goto error;
> }
> @@ -703,8 +691,7 @@ static int uvc_parse_streaming(struct uvc_device *dev,
> n = buflen >= size ? buffer[size-1] : 0;
>
> if (buflen < size + p*n) {
> - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
> - "interface %d HEADER descriptor is invalid.\n",
> + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface
%d HEADER
> descriptor is invalid.\n", dev->udev->devnum, alts->desc.bInterfaceNumber);
> goto error;
> }
> @@ -755,8 +742,7 @@ static int uvc_parse_streaming(struct uvc_device *dev,
>
> case UVC_VS_FORMAT_MPEG2TS:
> case UVC_VS_FORMAT_STREAM_BASED:
> - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
> - "interface %d FORMAT %u is not supported.\n",
> + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming
interface %d FORMAT
> %u is not supported.\n", dev->udev->devnum,
> alts->desc.bInterfaceNumber, _buffer[2]);
> break;
> @@ -780,8 +766,7 @@ static int uvc_parse_streaming(struct uvc_device *dev,
> }
>
> if (nformats == 0) {
> - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface
"
> - "%d has no supported formats defined.\n",
> + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface
%d has no
> supported formats defined.\n", dev->udev->devnum,
> alts->desc.bInterfaceNumber);
> goto error;
> }
> @@ -829,8 +814,7 @@ static int uvc_parse_streaming(struct uvc_device *dev,
> }
>
> if (buflen)
> - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface
"
> - "%d has %u bytes of trailing descriptor garbage.\n",
> + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface
%d has %u
> bytes of trailing descriptor garbage.\n", dev->udev->devnum,
> alts->desc.bInterfaceNumber, buflen);
>
> /* Parse the alternate settings to find the maximum bandwidth. */
> @@ -939,8 +923,7 @@ static int uvc_parse_vendor_control(struct uvc_device
> *dev, n = buflen >= 25 + p ? buffer[22+p] : 0;
>
> if (buflen < 25 + p + 2*n) {
> - uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
> - "interface %d EXTENSION_UNIT error\n",
> + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol
interface %d
> EXTENSION_UNIT error\n", udev->devnum, alts->desc.bInterfaceNumber);
> break;
> }
> @@ -988,8 +971,7 @@ static int uvc_parse_standard_control(struct uvc_device
> *dev, n = buflen >= 12 ? buffer[11] : 0;
>
> if (buflen < 12 + n) {
> - uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
> - "interface %d HEADER error\n", udev->devnum,
> + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol
interface %d HEADER
> error\n", udev->devnum, alts->desc.bInterfaceNumber);
> return -EINVAL;
> }
> @@ -1001,8 +983,7 @@ static int uvc_parse_standard_control(struct uvc_device
> *dev, for (i = 0; i < n; ++i) {
> intf = usb_ifnum_to_if(udev, buffer[12+i]);
> if (intf == NULL) {
> - uvc_trace(UVC_TRACE_DESCR, "device %d "
> - "interface %d doesn't exists\n",
> + uvc_trace(UVC_TRACE_DESCR, "device %d
interface %d doesn't exists\n",
> udev->devnum, i);
> continue;
> }
> @@ -1013,8 +994,7 @@ static int uvc_parse_standard_control(struct uvc_device
> *dev,
>
> case UVC_VC_INPUT_TERMINAL:
> if (buflen < 8) {
> - uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
> - "interface %d INPUT_TERMINAL error\n",
> + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol
interface %d
> INPUT_TERMINAL error\n", udev->devnum, alts->desc.bInterfaceNumber);
> return -EINVAL;
> }
> @@ -1024,9 +1004,7 @@ static int uvc_parse_standard_control(struct
> uvc_device *dev, */
> type = get_unaligned_le16(&buffer[4]);
> if ((type & 0xff00) == 0) {
> - uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
> - "interface %d INPUT_TERMINAL %d has invalid "
> - "type 0x%04x, skipping\n", udev->devnum,
> + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol
interface %d
> INPUT_TERMINAL %d has invalid type 0x%04x, skipping\n", udev->devnum,
> alts->desc.bInterfaceNumber,
> buffer[3], type);
> return 0;
> @@ -1047,8 +1025,7 @@ static int uvc_parse_standard_control(struct
> uvc_device *dev, }
>
> if (buflen < len + n + p) {
> - uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
> - "interface %d INPUT_TERMINAL error\n",
> + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol
interface %d
> INPUT_TERMINAL error\n", udev->devnum, alts->desc.bInterfaceNumber);
> return -EINVAL;
> }
> @@ -1094,8 +1071,7 @@ static int uvc_parse_standard_control(struct
> uvc_device *dev,
>
> case UVC_VC_OUTPUT_TERMINAL:
> if (buflen < 9) {
> - uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
> - "interface %d OUTPUT_TERMINAL error\n",
> + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol
interface %d
> OUTPUT_TERMINAL error\n", udev->devnum, alts->desc.bInterfaceNumber);
> return -EINVAL;
> }
> @@ -1105,9 +1081,7 @@ static int uvc_parse_standard_control(struct
> uvc_device *dev, */
> type = get_unaligned_le16(&buffer[4]);
> if ((type & 0xff00) == 0) {
> - uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
> - "interface %d OUTPUT_TERMINAL %d has invalid "
> - "type 0x%04x, skipping\n", udev->devnum,
> + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol
interface %d
> OUTPUT_TERMINAL %d has invalid type 0x%04x, skipping\n", udev->devnum,
> alts->desc.bInterfaceNumber, buffer[3], type);
> return 0;
> }
> @@ -1132,8 +1106,7 @@ static int uvc_parse_standard_control(struct
> uvc_device *dev, p = buflen >= 5 ? buffer[4] : 0;
>
> if (buflen < 5 || buflen < 6 + p) {
> - uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
> - "interface %d SELECTOR_UNIT error\n",
> + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol
interface %d
> SELECTOR_UNIT error\n", udev->devnum, alts->desc.bInterfaceNumber);
> return -EINVAL;
> }
> @@ -1158,8 +1131,7 @@ static int uvc_parse_standard_control(struct
> uvc_device *dev, p = dev->uvc_version >= 0x0110 ? 10 : 9;
>
> if (buflen < p + n) {
> - uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
> - "interface %d PROCESSING_UNIT error\n",
> + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol
interface %d
> PROCESSING_UNIT error\n", udev->devnum, alts->desc.bInterfaceNumber);
> return -EINVAL;
> }
> @@ -1191,8 +1163,7 @@ static int uvc_parse_standard_control(struct
> uvc_device *dev, n = buflen >= 24 + p ? buffer[22+p] : 0;
>
> if (buflen < 24 + p + n) {
> - uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
> - "interface %d EXTENSION_UNIT error\n",
> + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol
interface %d
> EXTENSION_UNIT error\n", udev->devnum, alts->desc.bInterfaceNumber);
> return -EINVAL;
> }
> @@ -1218,8 +1189,7 @@ static int uvc_parse_standard_control(struct
> uvc_device *dev, break;
>
> default:
> - uvc_trace(UVC_TRACE_DESCR, "Found an unknown CS_INTERFACE "
> - "descriptor (%u)\n", buffer[2]);
> + uvc_trace(UVC_TRACE_DESCR, "Found an unknown CS_INTERFACE
descriptor
> (%u)\n", buffer[2]); break;
> }
>
> @@ -1264,8 +1234,7 @@ static int uvc_parse_control(struct uvc_device *dev)
> if (usb_endpoint_is_int_in(desc) &&
> le16_to_cpu(desc->wMaxPacketSize) >= 8 &&
> desc->bInterval != 0) {
> - uvc_trace(UVC_TRACE_DESCR, "Found a Status endpoint "
> - "(addr %02x).\n", desc->bEndpointAddress);
> + uvc_trace(UVC_TRACE_DESCR, "Found a Status endpoint
(addr %02x).\n",
> desc->bEndpointAddress); dev->int_ep = ep;
> }
> }
> @@ -1312,8 +1281,7 @@ static int uvc_scan_chain_entity(struct
> uvc_video_chain *chain, printk(KERN_CONT " <- XU %d", entity->id);
>
> if (entity->bNrInPins != 1) {
> - uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has more
"
> - "than 1 input pin.\n", entity->id);
> + uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has more
than 1 input
> pin.\n", entity->id); return -1;
> }
>
> @@ -1324,8 +1292,7 @@ static int uvc_scan_chain_entity(struct
> uvc_video_chain *chain, printk(KERN_CONT " <- PU %d", entity->id);
>
> if (chain->processing != NULL) {
> - uvc_trace(UVC_TRACE_DESCR, "Found multiple "
> - "Processing Units in chain.\n");
> + uvc_trace(UVC_TRACE_DESCR, "Found multiple Processing
Units in
> chain.\n"); return -1;
> }
>
> @@ -1341,8 +1308,7 @@ static int uvc_scan_chain_entity(struct
> uvc_video_chain *chain, break;
>
> if (chain->selector != NULL) {
> - uvc_trace(UVC_TRACE_DESCR, "Found multiple Selector "
> - "Units in chain.\n");
> + uvc_trace(UVC_TRACE_DESCR, "Found multiple Selector
Units in chain.\n");
> return -1;
> }
>
> @@ -1377,8 +1343,7 @@ static int uvc_scan_chain_entity(struct
> uvc_video_chain *chain, break;
>
> default:
> - uvc_trace(UVC_TRACE_DESCR, "Unsupported entity type "
> - "0x%04x found in chain.\n", UVC_ENTITY_TYPE(entity));
> + uvc_trace(UVC_TRACE_DESCR, "Unsupported entity type 0x%04x
found in
> chain.\n", UVC_ENTITY_TYPE(entity)); return -1;
> }
>
> @@ -1407,8 +1372,7 @@ static int uvc_scan_chain_forward(struct
> uvc_video_chain *chain, switch (UVC_ENTITY_TYPE(forward)) {
> case UVC_VC_EXTENSION_UNIT:
> if (forward->bNrInPins != 1) {
> - uvc_trace(UVC_TRACE_DESCR, "Extension unit %d
"
> - "has more than 1 input pin.\n",
> + uvc_trace(UVC_TRACE_DESCR, "Extension unit %d
has more than 1 input
> pin.\n", entity->id);
> return -EINVAL;
> }
> @@ -1428,8 +1392,7 @@ static int uvc_scan_chain_forward(struct
> uvc_video_chain *chain, case UVC_OTT_MEDIA_TRANSPORT_OUTPUT:
> case UVC_TT_STREAMING:
> if (UVC_ENTITY_IS_ITERM(forward)) {
> - uvc_trace(UVC_TRACE_DESCR, "Unsupported input
"
> - "terminal %u.\n", forward->id);
> + uvc_trace(UVC_TRACE_DESCR, "Unsupported input
terminal %u.\n",
> forward->id); return -EINVAL;
> }
>
> @@ -1478,9 +1441,7 @@ static int uvc_scan_chain_backward(struct
> uvc_video_chain *chain, id = entity->baSourceID[i];
> term = uvc_entity_by_id(chain->dev, id);
> if (term == NULL || !UVC_ENTITY_IS_ITERM(term)) {
> - uvc_trace(UVC_TRACE_DESCR, "Selector unit %d "
> - "input %d isn't connected to an "
> - "input terminal\n", entity->id, i);
> + uvc_trace(UVC_TRACE_DESCR, "Selector unit %d
input %d isn't connected
> to an input terminal\n", entity->id, i); return -1;
> }
>
> @@ -1515,8 +1476,7 @@ static int uvc_scan_chain_backward(struct
> uvc_video_chain *chain,
>
> entity = uvc_entity_by_id(chain->dev, id);
> if (entity == NULL) {
> - uvc_trace(UVC_TRACE_DESCR, "Found reference to "
> - "unknown entity %d.\n", id);
> + uvc_trace(UVC_TRACE_DESCR, "Found reference to unknown entity
%d.\n",
> id); return -EINVAL;
> }
>
> @@ -1537,8 +1497,7 @@ static int uvc_scan_chain(struct uvc_video_chain
> *chain, while (entity != NULL) {
> /* Entity must not be part of an existing chain */
> if (entity->chain.next || entity->chain.prev) {
> - uvc_trace(UVC_TRACE_DESCR, "Found reference to "
> - "entity %d already in chain.\n", entity->id);
> + uvc_trace(UVC_TRACE_DESCR, "Found reference to entity
%d already in
> chain.\n", entity->id); return -EINVAL;
> }
>
> @@ -1766,8 +1725,7 @@ static int uvc_register_video(struct uvc_device *dev,
> */
> ret = uvc_video_init(stream);
> if (ret < 0) {
> - uvc_printk(KERN_ERR, "Failed to initialize the device "
> - "(%d).\n", ret);
> + uvc_printk(KERN_ERR, "Failed to initialize the device (%d).
\n", ret);
> return ret;
> }
>
> @@ -1825,8 +1783,7 @@ static int uvc_register_terms(struct uvc_device *dev,
>
> stream = uvc_stream_by_id(dev, term->id);
> if (stream == NULL) {
> - uvc_printk(KERN_INFO, "No streaming interface found "
> - "for terminal %u.", term->id);
> + uvc_printk(KERN_INFO, "No streaming interface found
for terminal %u.",
> term->id); continue;
> }
>
> @@ -1854,8 +1811,7 @@ static int uvc_register_chains(struct uvc_device *dev)
> #ifdef CONFIG_MEDIA_CONTROLLER
> ret = uvc_mc_register_entities(chain);
> if (ret < 0) {
> - uvc_printk(KERN_INFO, "Failed to register entites "
> - "(%d).\n", ret);
> + uvc_printk(KERN_INFO, "Failed to register entites
(%d).\n", ret);
> }
> #endif
> }
> @@ -1875,8 +1831,7 @@ static int uvc_probe(struct usb_interface *intf,
> int ret;
>
> if (id->idVendor && id->idProduct)
> - uvc_trace(UVC_TRACE_PROBE, "Probing known UVC device %s "
> - "(%04x:%04x)\n", udev->devpath, id->idVendor,
> + uvc_trace(UVC_TRACE_PROBE, "Probing known UVC device %s (%04x:
%04x)\n",
> udev->devpath, id->idVendor, id->idProduct);
> else
> uvc_trace(UVC_TRACE_PROBE, "Probing generic UVC device %s\n",
> @@ -1909,8 +1864,7 @@ static int uvc_probe(struct usb_interface *intf,
>
> /* Parse the Video Class control descriptor. */
> if (uvc_parse_control(dev) < 0) {
> - uvc_trace(UVC_TRACE_PROBE, "Unable to parse UVC "
> - "descriptors.\n");
> + uvc_trace(UVC_TRACE_PROBE, "Unable to parse UVC descriptors.
\n");
> goto error;
> }
>
> @@ -1921,10 +1875,8 @@ static int uvc_probe(struct usb_interface *intf,
> le16_to_cpu(udev->descriptor.idProduct));
>
> if (dev->quirks != id->driver_info) {
> - uvc_printk(KERN_INFO, "Forcing device quirks to 0x%x by module
"
> - "parameter for testing purpose.\n", dev->quirks);
> - uvc_printk(KERN_INFO, "Please report required quirks to the "
> - "linux-uvc-devel mailing list.\n");
> + uvc_printk(KERN_INFO, "Forcing device quirks to 0x%x by module
parameter
> for testing purpose.\n", dev->quirks); + uvc_printk(KERN_INFO,
"Please
> report required quirks to the linux-uvc-devel mailing list.\n"); }
>
> /* Initialize the media device and register the V4L2 device. */
> @@ -1966,9 +1918,7 @@ static int uvc_probe(struct usb_interface *intf,
>
> /* Initialize the interrupt URB. */
> if ((ret = uvc_status_init(dev)) < 0) {
> - uvc_printk(KERN_INFO, "Unable to initialize the status "
> - "endpoint (%d), status interrupt will not be "
> - "supported.\n", ret);
> + uvc_printk(KERN_INFO, "Unable to initialize the status
endpoint (%d),
> status interrupt will not be supported.\n", ret); }
>
> uvc_trace(UVC_TRACE_PROBE, "UVC device initialized.\n");
> @@ -2019,8 +1969,7 @@ static int uvc_suspend(struct usb_interface *intf,
> pm_message_t message) return uvc_video_suspend(stream);
> }
>
> - uvc_trace(UVC_TRACE_SUSPEND, "Suspend: video streaming USB interface "
> - "mismatch.\n");
> + uvc_trace(UVC_TRACE_SUSPEND, "Suspend: video streaming USB interface
> mismatch.\n"); return -EINVAL;
> }
>
> @@ -2059,8 +2008,7 @@ static int __uvc_resume(struct usb_interface *intf,
> int reset) }
> }
>
> - uvc_trace(UVC_TRACE_SUSPEND, "Resume: video streaming USB interface "
> - "mismatch.\n");
> + uvc_trace(UVC_TRACE_SUSPEND, "Resume: video streaming USB interface
> mismatch.\n"); return -EINVAL;
> }
>
> diff --git a/drivers/media/usb/uvc/uvc_entity.c
> b/drivers/media/usb/uvc/uvc_entity.c index ac386bb547e6..503bd3a2e298
> 100644
> --- a/drivers/media/usb/uvc/uvc_entity.c
> +++ b/drivers/media/usb/uvc/uvc_entity.c
> @@ -109,8 +109,7 @@ int uvc_mc_register_entities(struct uvc_video_chain
> *chain) list_for_each_entry(entity, &chain->entities, chain) {
> ret = uvc_mc_init_entity(chain, entity);
> if (ret < 0) {
> - uvc_printk(KERN_INFO, "Failed to initialize entity for
"
> - "entity %u\n", entity->id);
> + uvc_printk(KERN_INFO, "Failed to initialize entity for
entity %u\n",
> entity->id); return ret;
> }
> }
> @@ -118,8 +117,7 @@ int uvc_mc_register_entities(struct uvc_video_chain
> *chain) list_for_each_entry(entity, &chain->entities, chain) {
> ret = uvc_mc_create_links(chain, entity);
> if (ret < 0) {
> - uvc_printk(KERN_INFO, "Failed to create links for "
> - "entity %u\n", entity->id);
> + uvc_printk(KERN_INFO, "Failed to create links for
entity %u\n",
> entity->id); return ret;
> }
> }
> diff --git a/drivers/media/usb/uvc/uvc_isight.c
> b/drivers/media/usb/uvc/uvc_isight.c index 8510e7259e76..e510be6431d4
> 100644
> --- a/drivers/media/usb/uvc/uvc_isight.c
> +++ b/drivers/media/usb/uvc/uvc_isight.c
> @@ -61,8 +61,7 @@ static int isight_decode(struct uvc_video_queue *queue,
> struct uvc_buffer *buf, /* Synchronize to the input stream by waiting for a
> header packet. */ if (buf->state != UVC_BUF_STATE_ACTIVE) {
> if (!is_header) {
> - uvc_trace(UVC_TRACE_FRAME, "Dropping packet (out of "
> - "sync).\n");
> + uvc_trace(UVC_TRACE_FRAME, "Dropping packet (out of
sync).\n");
> return 0;
> }
>
> @@ -90,8 +89,7 @@ static int isight_decode(struct uvc_video_queue *queue,
> struct uvc_buffer *buf, buf->bytesused += nbytes;
>
> if (len > maxlen || buf->bytesused == buf->length) {
> - uvc_trace(UVC_TRACE_FRAME, "Frame complete "
> - "(overflow).\n");
> + uvc_trace(UVC_TRACE_FRAME, "Frame complete (overflow).
\n");
> buf->state = UVC_BUF_STATE_DONE;
> }
> }
> @@ -106,8 +104,7 @@ void uvc_video_decode_isight(struct urb *urb, struct
> uvc_streaming *stream,
>
> for (i = 0; i < urb->number_of_packets; ++i) {
> if (urb->iso_frame_desc[i].status < 0) {
> - uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame "
> - "lost (%d).\n",
> + uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame lost
(%d).\n",
> urb->iso_frame_desc[i].status);
> }
>
> diff --git a/drivers/media/usb/uvc/uvc_status.c
> b/drivers/media/usb/uvc/uvc_status.c index f552ab997956..16adf094447d
> 100644
> --- a/drivers/media/usb/uvc/uvc_status.c
> +++ b/drivers/media/usb/uvc/uvc_status.c
> @@ -81,8 +81,7 @@ static void uvc_input_report_key(struct uvc_device *dev,
> unsigned int code, static void uvc_event_streaming(struct uvc_device *dev,
> __u8 *data, int len) {
> if (len < 3) {
> - uvc_trace(UVC_TRACE_STATUS, "Invalid streaming status event "
> - "received.\n");
> + uvc_trace(UVC_TRACE_STATUS, "Invalid streaming status event
> received.\n"); return;
> }
>
> @@ -93,8 +92,7 @@ static void uvc_event_streaming(struct uvc_device *dev,
> __u8 *data, int len) data[1], data[3] ? "pressed" : "released", len);
> uvc_input_report_key(dev, KEY_CAMERA, data[3]);
> } else {
> - uvc_trace(UVC_TRACE_STATUS, "Stream %u error event %02x %02x "
> - "len %d.\n", data[1], data[2], data[3], len);
> + uvc_trace(UVC_TRACE_STATUS, "Stream %u error event %02x %02x
len %d.\n",
> data[1], data[2], data[3], len); }
> }
>
> @@ -103,8 +101,7 @@ static void uvc_event_control(struct uvc_device *dev,
> __u8 *data, int len) char *attrs[3] = { "value", "info", "failure" };
>
> if (len < 6 || data[2] != 0 || data[4] > 2) {
> - uvc_trace(UVC_TRACE_STATUS, "Invalid control status event "
> - "received.\n");
> + uvc_trace(UVC_TRACE_STATUS, "Invalid control status event
received.\n");
> return;
> }
>
> @@ -129,8 +126,7 @@ static void uvc_status_complete(struct urb *urb)
> return;
>
> default:
> - uvc_printk(KERN_WARNING, "Non-zero status (%d) in status "
> - "completion handler.\n", urb->status);
> + uvc_printk(KERN_WARNING, "Non-zero status (%d) in status
completion
> handler.\n", urb->status); return;
> }
>
> @@ -146,8 +142,7 @@ static void uvc_status_complete(struct urb *urb)
> break;
>
> default:
> - uvc_trace(UVC_TRACE_STATUS, "Unknown status event "
> - "type %u.\n", dev->status[0]);
> + uvc_trace(UVC_TRACE_STATUS, "Unknown status event type
%u.\n",
> dev->status[0]); break;
> }
> }
> diff --git a/drivers/media/usb/uvc/uvc_v4l2.c
> b/drivers/media/usb/uvc/uvc_v4l2.c index 05eed4be25df..457a26b32310 100644
> --- a/drivers/media/usb/uvc/uvc_v4l2.c
> +++ b/drivers/media/usb/uvc/uvc_v4l2.c
> @@ -85,8 +85,7 @@ static int uvc_ioctl_ctrl_map(struct uvc_video_chain
> *chain, break;
>
> default:
> - uvc_trace(UVC_TRACE_CONTROL, "Unsupported V4L2 control type "
> - "%u.\n", xmap->v4l2_type);
> + uvc_trace(UVC_TRACE_CONTROL, "Unsupported V4L2 control type
%u.\n",
> xmap->v4l2_type); ret = -ENOTTY;
> goto done;
> }
> @@ -224,8 +223,7 @@ static int uvc_v4l2_try_format(struct uvc_streaming
> *stream,
>
> /* Use the default frame interval. */
> interval = frame->dwDefaultFrameInterval;
> - uvc_trace(UVC_TRACE_FORMAT, "Using default frame interval %u.%u us "
> - "(%u.%u fps).\n", interval/10, interval%10, 10000000/interval,
> + uvc_trace(UVC_TRACE_FORMAT, "Using default frame interval %u.%u us
(%u.%u
> fps).\n", interval/10, interval%10, 10000000/interval,
> (100000000/interval)%10);
>
> /* Set the format index, frame index and frame interval. */
> diff --git a/drivers/media/usb/uvc/uvc_video.c
> b/drivers/media/usb/uvc/uvc_video.c index b5589d5f5da4..4ce767e44ccf 100644
> --- a/drivers/media/usb/uvc/uvc_video.c
> +++ b/drivers/media/usb/uvc/uvc_video.c
> @@ -77,8 +77,7 @@ int uvc_query_ctrl(struct uvc_device *dev, __u8 query,
> __u8 unit, ret = __uvc_query_ctrl(dev, query, unit, intfnum, cs, data,
> size, UVC_CTRL_CONTROL_TIMEOUT);
> if (ret != size) {
> - uvc_printk(KERN_ERR, "Failed to query (%s) UVC control %u on "
> - "unit %u: %d (exp. %u).\n", uvc_query_name(query), cs,
> + uvc_printk(KERN_ERR, "Failed to query (%s) UVC control %u on
unit %u: %d
> (exp. %u).\n", uvc_query_name(query), cs, unit, ret, size);
> return -EIO;
> }
> @@ -188,9 +187,7 @@ static int uvc_get_video_ctrl(struct uvc_streaming
> *stream, * answer a GET_MIN or GET_MAX request with the wCompQuality
> * field only.
> */
> - uvc_warn_once(stream->dev, UVC_WARN_MINMAX, "UVC non "
> - "compliance - GET_MIN/MAX(PROBE) incorrectly "
> - "supported. Enabling workaround.\n");
> + uvc_warn_once(stream->dev, UVC_WARN_MINMAX, "UVC non
compliance -
> GET_MIN/MAX(PROBE) incorrectly supported. Enabling workaround.\n");
> memset(ctrl, 0, sizeof *ctrl);
> ctrl->wCompQuality = le16_to_cpup((__le16 *)data);
> ret = 0;
> @@ -200,14 +197,11 @@ static int uvc_get_video_ctrl(struct uvc_streaming
> *stream, * video probe control. Warn once and return, the caller will
> * fall back to GET_CUR.
> */
> - uvc_warn_once(stream->dev, UVC_WARN_PROBE_DEF, "UVC non "
> - "compliance - GET_DEF(PROBE) not supported. "
> - "Enabling workaround.\n");
> + uvc_warn_once(stream->dev, UVC_WARN_PROBE_DEF, "UVC non
compliance -
> GET_DEF(PROBE) not supported. Enabling workaround.\n"); ret = -EIO;
> goto out;
> } else if (ret != size) {
> - uvc_printk(KERN_ERR, "Failed to query (%u) UVC %s control : "
> - "%d (exp. %u).\n", query, probe ? "probe" : "commit",
> + uvc_printk(KERN_ERR, "Failed to query (%u) UVC %s control : %d
(exp.
> %u).\n", query, probe ? "probe" : "commit", ret, size);
> ret = -EIO;
> goto out;
> @@ -287,8 +281,7 @@ static int uvc_set_video_ctrl(struct uvc_streaming
> *stream, probe ? UVC_VS_PROBE_CONTROL : UVC_VS_COMMIT_CONTROL, data,
> size, uvc_timeout_param);
> if (ret != size) {
> - uvc_printk(KERN_ERR, "Failed to set UVC %s control : "
> - "%d (exp. %u).\n", probe ? "probe" : "commit",
> + uvc_printk(KERN_ERR, "Failed to set UVC %s control : %d (exp.
%u).\n",
> probe ? "probe" : "commit", ret, size);
> ret = -EIO;
> }
> @@ -652,8 +645,7 @@ void uvc_video_clock_update(struct uvc_streaming
> *stream,
>
> sof = y;
>
> - uvc_trace(UVC_TRACE_CLOCK, "%s: PTS %u y %llu.%06llu SOF %u.%06llu "
> - "(x1 %u x2 %u y1 %u y2 %u SOF offset %u)\n",
> + uvc_trace(UVC_TRACE_CLOCK, "%s: PTS %u y %llu.%06llu SOF %u.%06llu (x1
%u
> x2 %u y1 %u y2 %u SOF offset %u)\n", stream->dev->name, buf->pts,
> y >> 16, div_u64((y & 0xffff) * 1000000, 65536),
> sof >> 16, div_u64(((u64)sof & 0xffff) * 1000000LLU, 65536),
> @@ -694,8 +686,7 @@ void uvc_video_clock_update(struct uvc_streaming
> *stream, ts.tv_nsec -= NSEC_PER_SEC;
> }
>
> - uvc_trace(UVC_TRACE_CLOCK, "%s: SOF %u.%06llu y %llu ts %llu "
> - "buf ts %llu (x1 %u/%u/%u x2 %u/%u/%u y1 %u y2 %u)\n",
> + uvc_trace(UVC_TRACE_CLOCK, "%s: SOF %u.%06llu y %llu ts %llu buf ts
%llu
> (x1 %u/%u/%u x2 %u/%u/%u y1 %u y2 %u)\n", stream->dev->name,
> sof >> 16, div_u64(((u64)sof & 0xffff) * 1000000LLU, 65536),
> y, timespec_to_ns(&ts), vbuf->vb2_buf.timestamp,
> @@ -829,9 +820,7 @@ static void uvc_video_stats_update(struct uvc_streaming
> *stream) {
> struct uvc_stats_frame *frame = &stream->stats.frame;
>
> - uvc_trace(UVC_TRACE_STATS, "frame %u stats: %u/%u/%u packets, "
> - "%u/%u/%u pts (%searly %sinitial), %u/%u scr, "
> - "last pts/stc/sof %u/%u/%u\n",
> + uvc_trace(UVC_TRACE_STATS, "frame %u stats: %u/%u/%u packets, %u/%u/%u
pts
> (%searly %sinitial), %u/%u scr, last pts/stc/sof %u/%u/%u\n",
> stream->sequence, frame->first_data,
> frame->nb_packets - frame->nb_empty, frame->nb_packets,
> frame->nb_pts_diffs, frame->last_pts_diff, frame->nb_pts,
> @@ -1002,8 +991,7 @@ static int uvc_video_decode_start(struct uvc_streaming
> *stream,
>
> /* Mark the buffer as bad if the error bit is set. */
> if (data[1] & UVC_STREAM_ERR) {
> - uvc_trace(UVC_TRACE_FRAME, "Marking buffer as bad (error bit "
> - "set).\n");
> + uvc_trace(UVC_TRACE_FRAME, "Marking buffer as bad (error bit
set).\n");
> buf->error = 1;
> }
>
> @@ -1019,8 +1007,7 @@ static int uvc_video_decode_start(struct uvc_streaming
> *stream, struct timespec ts;
>
> if (fid == stream->last_fid) {
> - uvc_trace(UVC_TRACE_FRAME, "Dropping payload (out of "
> - "sync).\n");
> + uvc_trace(UVC_TRACE_FRAME, "Dropping payload (out of
sync).\n");
> if ((stream->dev->quirks & UVC_QUIRK_STREAM_NO_FID) &&
> (data[1] & UVC_STREAM_EOF))
> stream->last_fid ^= UVC_STREAM_FID;
> @@ -1053,8 +1040,7 @@ static int uvc_video_decode_start(struct uvc_streaming
> *stream, * previous payload had the EOF bit set.
> */
> if (fid != stream->last_fid && buf->bytesused != 0) {
> - uvc_trace(UVC_TRACE_FRAME, "Frame complete (FID bit "
> - "toggled).\n");
> + uvc_trace(UVC_TRACE_FRAME, "Frame complete (FID bit toggled).
\n");
> buf->state = UVC_BUF_STATE_READY;
> return -EAGAIN;
> }
> @@ -1166,8 +1152,7 @@ static void uvc_video_decode_isoc(struct urb *urb,
> struct uvc_streaming *stream,
>
> for (i = 0; i < urb->number_of_packets; ++i) {
> if (urb->iso_frame_desc[i].status < 0) {
> - uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame "
> - "lost (%d).\n", urb-
>iso_frame_desc[i].status);
> + uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame lost
(%d).\n",
> urb->iso_frame_desc[i].status); /* Mark the buffer as faulty. */
> if (buf != NULL)
> buf->error = 1;
> @@ -1328,8 +1313,7 @@ static void uvc_video_complete(struct urb *urb)
> break;
>
> default:
> - uvc_printk(KERN_WARNING, "Non-zero status (%d) in video "
> - "completion handler.\n", urb->status);
> + uvc_printk(KERN_WARNING, "Non-zero status (%d) in video
completion
> handler.\n", urb->status);
>
> case -ENOENT: /* usb_kill_urb() called. */
> if (stream->frozen)
> @@ -1424,15 +1408,13 @@ static int uvc_alloc_urb_buffers(struct
> uvc_streaming *stream, }
>
> if (i == UVC_URBS) {
> - uvc_trace(UVC_TRACE_VIDEO, "Allocated %u URB buffers "
> - "of %ux%u bytes each.\n", UVC_URBS, npackets,
> + uvc_trace(UVC_TRACE_VIDEO, "Allocated %u URB buffers
of %ux%u bytes
> each.\n", UVC_URBS, npackets, psize);
> return npackets;
> }
> }
>
> - uvc_trace(UVC_TRACE_VIDEO, "Failed to allocate URB buffers (%u bytes "
> - "per packet).\n", psize);
> + uvc_trace(UVC_TRACE_VIDEO, "Failed to allocate URB buffers (%u bytes
per
> packet).\n", psize); return 0;
> }
>
> @@ -1621,12 +1603,10 @@ static int uvc_init_video(struct uvc_streaming
> *stream, gfp_t gfp_flags) bandwidth =
> stream->ctrl.dwMaxPayloadTransferSize;
>
> if (bandwidth == 0) {
> - uvc_trace(UVC_TRACE_VIDEO, "Device requested null "
> - "bandwidth, defaulting to lowest.\n");
> + uvc_trace(UVC_TRACE_VIDEO, "Device requested null
bandwidth, defaulting
> to lowest.\n"); bandwidth = 1;
> } else {
> - uvc_trace(UVC_TRACE_VIDEO, "Device requested %u "
> - "B/frame bandwidth.\n", bandwidth);
> + uvc_trace(UVC_TRACE_VIDEO, "Device requested %u
B/frame bandwidth.\n",
> bandwidth); }
>
> for (i = 0; i < intf->num_altsetting; ++i) {
> @@ -1649,13 +1629,11 @@ static int uvc_init_video(struct uvc_streaming
> *stream, gfp_t gfp_flags) }
>
> if (best_ep == NULL) {
> - uvc_trace(UVC_TRACE_VIDEO, "No fast enough alt setting
"
> - "for requested bandwidth.\n");
> + uvc_trace(UVC_TRACE_VIDEO, "No fast enough alt setting
for requested
> bandwidth.\n"); return -EIO;
> }
>
> - uvc_trace(UVC_TRACE_VIDEO, "Selecting alternate setting %u "
> - "(%u B/frame bandwidth).\n", altsetting, best_psize);
> + uvc_trace(UVC_TRACE_VIDEO, "Selecting alternate setting %u (%u
B/frame
> bandwidth).\n", altsetting, best_psize);
>
> ret = usb_set_interface(stream->dev->udev, intfnum,
altsetting);
> if (ret < 0)
> @@ -1679,8 +1657,7 @@ static int uvc_init_video(struct uvc_streaming
> *stream, gfp_t gfp_flags) for (i = 0; i < UVC_URBS; ++i) {
> ret = usb_submit_urb(stream->urb[i], gfp_flags);
> if (ret < 0) {
> - uvc_printk(KERN_ERR, "Failed to submit URB %u "
> - "(%d).\n", i, ret);
> + uvc_printk(KERN_ERR, "Failed to submit URB %u (%d).
\n", i, ret);
> uvc_uninit_video(stream, 1);
> return ret;
> }
> @@ -1814,8 +1791,7 @@ int uvc_video_init(struct uvc_streaming *stream)
> }
>
> if (format->nframes == 0) {
> - uvc_printk(KERN_INFO, "No frame descriptor found for the "
> - "default format.\n");
> + uvc_printk(KERN_INFO, "No frame descriptor found for the
default
> format.\n"); return -EINVAL;
> }
>
> @@ -1849,8 +1825,7 @@ int uvc_video_init(struct uvc_streaming *stream)
> if (stream->intf->num_altsetting == 1)
> stream->decode = uvc_video_encode_bulk;
> else {
> - uvc_printk(KERN_INFO, "Isochronous endpoints are not "
> - "supported for video output devices.\n");
> + uvc_printk(KERN_INFO, "Isochronous endpoints are not
supported for video
> output devices.\n"); return -EINVAL;
> }
> }
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 79+ messages in thread
* [PATCH 50/57] [media] zr364xx: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (48 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 49/57] [media] uvc: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 51/57] [media] v4l2-core: " Mauro Carvalho Chehab
` (7 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Antoine Jacquet, Mauro Carvalho Chehab,
linux-usb
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/usb/zr364xx/zr364xx.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/media/usb/zr364xx/zr364xx.c b/drivers/media/usb/zr364xx/zr364xx.c
index cc128db85723..3950708cbb32 100644
--- a/drivers/media/usb/zr364xx/zr364xx.c
+++ b/drivers/media/usb/zr364xx/zr364xx.c
@@ -633,8 +633,7 @@ static int zr364xx_read_video_callback(struct zr364xx_camera *cam,
} else {
if (frm->cur_size + purb->actual_length > MAX_FRAME_SIZE) {
dev_info(&cam->udev->dev,
- "%s: buffer (%d bytes) too small to hold "
- "frame data. Discarding frame data.\n",
+ "%s: buffer (%d bytes) too small to hold frame data. Discarding frame data.\n",
__func__, MAX_FRAME_SIZE);
} else {
pdest += frm->cur_size;
@@ -1373,8 +1372,7 @@ static int zr364xx_board_init(struct zr364xx_camera *cam)
&cam->buffer.frame[i], i,
cam->buffer.frame[i].lpvbits);
if (cam->buffer.frame[i].lpvbits == NULL) {
- printk(KERN_INFO KBUILD_MODNAME ": out of memory. "
- "Using less frames\n");
+ printk(KERN_INFO KBUILD_MODNAME ": out of memory. Using less frames\n");
break;
}
}
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 51/57] [media] v4l2-core: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (49 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 50/57] [media] zr364xx: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 52/57] [media] common: " Mauro Carvalho Chehab
` (6 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Pawel Osciak,
Marek Szyprowski, Kyungmin Park, Hans Verkuil, Laurent Pinchart,
Antti Palosaari, Sakari Ailus, Ricardo Ribalda Delgado,
Nick Dyer, Shuah Khan, Guennadi Liakhovetski
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/v4l2-core/v4l2-ioctl.c | 90 ++++++++---------------------
drivers/media/v4l2-core/videobuf-core.c | 3 +-
drivers/media/v4l2-core/videobuf2-core.c | 21 +++----
drivers/media/v4l2-core/videobuf2-v4l2.c | 9 +--
drivers/media/v4l2-core/videobuf2-vmalloc.c | 3 +-
5 files changed, 37 insertions(+), 89 deletions(-)
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index c52d94c018bb..13b589a8955e 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -174,8 +174,7 @@ static void v4l_print_querycap(const void *arg, bool write_only)
{
const struct v4l2_capability *p = arg;
- pr_cont("driver=%.*s, card=%.*s, bus=%.*s, version=0x%08x, "
- "capabilities=0x%08x, device_caps=0x%08x\n",
+ pr_cont("driver=%.*s, card=%.*s, bus=%.*s, version=0x%08x, capabilities=0x%08x, device_caps=0x%08x\n",
(int)sizeof(p->driver), p->driver,
(int)sizeof(p->card), p->card,
(int)sizeof(p->bus_info), p->bus_info,
@@ -186,8 +185,7 @@ static void v4l_print_enuminput(const void *arg, bool write_only)
{
const struct v4l2_input *p = arg;
- pr_cont("index=%u, name=%.*s, type=%u, audioset=0x%x, tuner=%u, "
- "std=0x%08Lx, status=0x%x, capabilities=0x%x\n",
+ pr_cont("index=%u, name=%.*s, type=%u, audioset=0x%x, tuner=%u, std=0x%08Lx, status=0x%x, capabilities=0x%x\n",
p->index, (int)sizeof(p->name), p->name, p->type, p->audioset,
p->tuner, (unsigned long long)p->std, p->status,
p->capabilities);
@@ -197,8 +195,7 @@ static void v4l_print_enumoutput(const void *arg, bool write_only)
{
const struct v4l2_output *p = arg;
- pr_cont("index=%u, name=%.*s, type=%u, audioset=0x%x, "
- "modulator=%u, std=0x%08Lx, capabilities=0x%x\n",
+ pr_cont("index=%u, name=%.*s, type=%u, audioset=0x%x, modulator=%u, std=0x%08Lx, capabilities=0x%x\n",
p->index, (int)sizeof(p->name), p->name, p->type, p->audioset,
p->modulator, (unsigned long long)p->std, p->capabilities);
}
@@ -256,11 +253,7 @@ static void v4l_print_format(const void *arg, bool write_only)
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
case V4L2_BUF_TYPE_VIDEO_OUTPUT:
pix = &p->fmt.pix;
- pr_cont(", width=%u, height=%u, "
- "pixelformat=%c%c%c%c, field=%s, "
- "bytesperline=%u, sizeimage=%u, colorspace=%d, "
- "flags=0x%x, ycbcr_enc=%u, quantization=%u, "
- "xfer_func=%u\n",
+ pr_cont(", width=%u, height=%u, pixelformat=%c%c%c%c, field=%s, bytesperline=%u, sizeimage=%u, colorspace=%d, flags=0x%x, ycbcr_enc=%u, quantization=%u, xfer_func=%u\n",
pix->width, pix->height,
(pix->pixelformat & 0xff),
(pix->pixelformat >> 8) & 0xff,
@@ -274,10 +267,7 @@ static void v4l_print_format(const void *arg, bool write_only)
case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
mp = &p->fmt.pix_mp;
- pr_cont(", width=%u, height=%u, "
- "format=%c%c%c%c, field=%s, "
- "colorspace=%d, num_planes=%u, flags=0x%x, "
- "ycbcr_enc=%u, quantization=%u, xfer_func=%u\n",
+ pr_cont(", width=%u, height=%u, format=%c%c%c%c, field=%s, colorspace=%d, num_planes=%u, flags=0x%x, ycbcr_enc=%u, quantization=%u, xfer_func=%u\n",
mp->width, mp->height,
(mp->pixelformat & 0xff),
(mp->pixelformat >> 8) & 0xff,
@@ -306,8 +296,7 @@ static void v4l_print_format(const void *arg, bool write_only)
case V4L2_BUF_TYPE_VBI_CAPTURE:
case V4L2_BUF_TYPE_VBI_OUTPUT:
vbi = &p->fmt.vbi;
- pr_cont(", sampling_rate=%u, offset=%u, samples_per_line=%u, "
- "sample_format=%c%c%c%c, start=%u,%u, count=%u,%u\n",
+ pr_cont(", sampling_rate=%u, offset=%u, samples_per_line=%u, sample_format=%c%c%c%c, start=%u,%u, count=%u,%u\n",
vbi->sampling_rate, vbi->offset,
vbi->samples_per_line,
(vbi->sample_format & 0xff),
@@ -343,9 +332,7 @@ static void v4l_print_framebuffer(const void *arg, bool write_only)
{
const struct v4l2_framebuffer *p = arg;
- pr_cont("capability=0x%x, flags=0x%x, base=0x%p, width=%u, "
- "height=%u, pixelformat=%c%c%c%c, "
- "bytesperline=%u, sizeimage=%u, colorspace=%d\n",
+ pr_cont("capability=0x%x, flags=0x%x, base=0x%p, width=%u, height=%u, pixelformat=%c%c%c%c, bytesperline=%u, sizeimage=%u, colorspace=%d\n",
p->capability, p->flags, p->base,
p->fmt.width, p->fmt.height,
(p->fmt.pixelformat & 0xff),
@@ -368,8 +355,7 @@ static void v4l_print_modulator(const void *arg, bool write_only)
if (write_only)
pr_cont("index=%u, txsubchans=0x%x\n", p->index, p->txsubchans);
else
- pr_cont("index=%u, name=%.*s, capability=0x%x, "
- "rangelow=%u, rangehigh=%u, txsubchans=0x%x\n",
+ pr_cont("index=%u, name=%.*s, capability=0x%x, rangelow=%u, rangehigh=%u, txsubchans=0x%x\n",
p->index, (int)sizeof(p->name), p->name, p->capability,
p->rangelow, p->rangehigh, p->txsubchans);
}
@@ -381,9 +367,7 @@ static void v4l_print_tuner(const void *arg, bool write_only)
if (write_only)
pr_cont("index=%u, audmode=%u\n", p->index, p->audmode);
else
- pr_cont("index=%u, name=%.*s, type=%u, capability=0x%x, "
- "rangelow=%u, rangehigh=%u, signal=%u, afc=%d, "
- "rxsubchans=0x%x, audmode=%u\n",
+ pr_cont("index=%u, name=%.*s, type=%u, capability=0x%x, rangelow=%u, rangehigh=%u, signal=%u, afc=%d, rxsubchans=0x%x, audmode=%u\n",
p->index, (int)sizeof(p->name), p->name, p->type,
p->capability, p->rangelow,
p->rangehigh, p->signal, p->afc,
@@ -402,8 +386,7 @@ static void v4l_print_standard(const void *arg, bool write_only)
{
const struct v4l2_standard *p = arg;
- pr_cont("index=%u, id=0x%Lx, name=%.*s, fps=%u/%u, "
- "framelines=%u\n", p->index,
+ pr_cont("index=%u, id=0x%Lx, name=%.*s, fps=%u/%u, framelines=%u\n", p->index,
(unsigned long long)p->id, (int)sizeof(p->name), p->name,
p->frameperiod.numerator,
p->frameperiod.denominator,
@@ -419,8 +402,7 @@ static void v4l_print_hw_freq_seek(const void *arg, bool write_only)
{
const struct v4l2_hw_freq_seek *p = arg;
- pr_cont("tuner=%u, type=%u, seek_upward=%u, wrap_around=%u, spacing=%u, "
- "rangelow=%u, rangehigh=%u\n",
+ pr_cont("tuner=%u, type=%u, seek_upward=%u, wrap_around=%u, spacing=%u, rangelow=%u, rangehigh=%u\n",
p->tuner, p->type, p->seek_upward, p->wrap_around, p->spacing,
p->rangelow, p->rangehigh);
}
@@ -442,8 +424,7 @@ static void v4l_print_buffer(const void *arg, bool write_only)
const struct v4l2_plane *plane;
int i;
- pr_cont("%02ld:%02d:%02d.%08ld index=%d, type=%s, "
- "flags=0x%08x, field=%s, sequence=%d, memory=%s",
+ pr_cont("%02ld:%02d:%02d.%08ld index=%d, type=%s, flags=0x%08x, field=%s, sequence=%d, memory=%s",
p->timestamp.tv_sec / 3600,
(int)(p->timestamp.tv_sec / 60) % 60,
(int)(p->timestamp.tv_sec % 60),
@@ -458,8 +439,7 @@ static void v4l_print_buffer(const void *arg, bool write_only)
for (i = 0; i < p->length; ++i) {
plane = &p->m.planes[i];
printk(KERN_DEBUG
- "plane %d: bytesused=%d, data_offset=0x%08x, "
- "offset/userptr=0x%lx, length=%d\n",
+ "plane %d: bytesused=%d, data_offset=0x%08x, offset/userptr=0x%lx, length=%d\n",
i, plane->bytesused, plane->data_offset,
plane->m.userptr, plane->length);
}
@@ -468,8 +448,7 @@ static void v4l_print_buffer(const void *arg, bool write_only)
p->bytesused, p->m.userptr, p->length);
}
- printk(KERN_DEBUG "timecode=%02d:%02d:%02d type=%d, "
- "flags=0x%08x, frames=%d, userbits=0x%08x\n",
+ printk(KERN_DEBUG "timecode=%02d:%02d:%02d type=%d, flags=0x%08x, frames=%d, userbits=0x%08x\n",
tc->hours, tc->minutes, tc->seconds,
tc->type, tc->flags, tc->frames, *(__u32 *)tc->userbits);
}
@@ -503,8 +482,7 @@ static void v4l_print_streamparm(const void *arg, bool write_only)
p->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
const struct v4l2_captureparm *c = &p->parm.capture;
- pr_cont(", capability=0x%x, capturemode=0x%x, timeperframe=%d/%d, "
- "extendedmode=%d, readbuffers=%d\n",
+ pr_cont(", capability=0x%x, capturemode=0x%x, timeperframe=%d/%d, extendedmode=%d, readbuffers=%d\n",
c->capability, c->capturemode,
c->timeperframe.numerator, c->timeperframe.denominator,
c->extendedmode, c->readbuffers);
@@ -512,8 +490,7 @@ static void v4l_print_streamparm(const void *arg, bool write_only)
p->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
const struct v4l2_outputparm *c = &p->parm.output;
- pr_cont(", capability=0x%x, outputmode=0x%x, timeperframe=%d/%d, "
- "extendedmode=%d, writebuffers=%d\n",
+ pr_cont(", capability=0x%x, outputmode=0x%x, timeperframe=%d/%d, extendedmode=%d, writebuffers=%d\n",
c->capability, c->outputmode,
c->timeperframe.numerator, c->timeperframe.denominator,
c->extendedmode, c->writebuffers);
@@ -526,8 +503,7 @@ static void v4l_print_queryctrl(const void *arg, bool write_only)
{
const struct v4l2_queryctrl *p = arg;
- pr_cont("id=0x%x, type=%d, name=%.*s, min/max=%d/%d, "
- "step=%d, default=%d, flags=0x%08x\n",
+ pr_cont("id=0x%x, type=%d, name=%.*s, min/max=%d/%d, step=%d, default=%d, flags=0x%08x\n",
p->id, p->type, (int)sizeof(p->name), p->name,
p->minimum, p->maximum,
p->step, p->default_value, p->flags);
@@ -537,9 +513,7 @@ static void v4l_print_query_ext_ctrl(const void *arg, bool write_only)
{
const struct v4l2_query_ext_ctrl *p = arg;
- pr_cont("id=0x%x, type=%d, name=%.*s, min/max=%lld/%lld, "
- "step=%lld, default=%lld, flags=0x%08x, elem_size=%u, elems=%u, "
- "nr_of_dims=%u, dims=%u,%u,%u,%u\n",
+ pr_cont("id=0x%x, type=%d, name=%.*s, min/max=%lld/%lld, step=%lld, default=%lld, flags=0x%08x, elem_size=%u, elems=%u, nr_of_dims=%u, dims=%u,%u,%u,%u\n",
p->id, p->type, (int)sizeof(p->name), p->name,
p->minimum, p->maximum,
p->step, p->default_value, p->flags,
@@ -583,9 +557,7 @@ static void v4l_print_cropcap(const void *arg, bool write_only)
{
const struct v4l2_cropcap *p = arg;
- pr_cont("type=%s, bounds wxh=%dx%d, x,y=%d,%d, "
- "defrect wxh=%dx%d, x,y=%d,%d, "
- "pixelaspect %d/%d\n",
+ pr_cont("type=%s, bounds wxh=%dx%d, x,y=%d,%d, defrect wxh=%dx%d, x,y=%d,%d, pixelaspect %d/%d\n",
prt_names(p->type, v4l2_type_names),
p->bounds.width, p->bounds.height,
p->bounds.left, p->bounds.top,
@@ -618,8 +590,7 @@ static void v4l_print_jpegcompression(const void *arg, bool write_only)
{
const struct v4l2_jpegcompression *p = arg;
- pr_cont("quality=%d, APPn=%d, APP_len=%d, "
- "COM_len=%d, jpeg_markers=0x%x\n",
+ pr_cont("quality=%d, APPn=%d, APP_len=%d, COM_len=%d, jpeg_markers=0x%x\n",
p->quality, p->APPn, p->APP_len,
p->COM_len, p->jpeg_markers);
}
@@ -686,14 +657,7 @@ static void v4l_print_dv_timings(const void *arg, bool write_only)
switch (p->type) {
case V4L2_DV_BT_656_1120:
- pr_cont("type=bt-656/1120, interlaced=%u, "
- "pixelclock=%llu, "
- "width=%u, height=%u, polarities=0x%x, "
- "hfrontporch=%u, hsync=%u, "
- "hbackporch=%u, vfrontporch=%u, "
- "vsync=%u, vbackporch=%u, "
- "il_vfrontporch=%u, il_vsync=%u, "
- "il_vbackporch=%u, standards=0x%x, flags=0x%x\n",
+ pr_cont("type=bt-656/1120, interlaced=%u, pixelclock=%llu, width=%u, height=%u, polarities=0x%x, hfrontporch=%u, hsync=%u, hbackporch=%u, vfrontporch=%u, vsync=%u, vbackporch=%u, il_vfrontporch=%u, il_vsync=%u, il_vbackporch=%u, standards=0x%x, flags=0x%x\n",
p->bt.interlaced, p->bt.pixelclock,
p->bt.width, p->bt.height,
p->bt.polarities, p->bt.hfrontporch,
@@ -723,8 +687,7 @@ static void v4l_print_dv_timings_cap(const void *arg, bool write_only)
switch (p->type) {
case V4L2_DV_BT_656_1120:
- pr_cont("type=bt-656/1120, width=%u-%u, height=%u-%u, "
- "pixelclock=%llu-%llu, standards=0x%x, capabilities=0x%x\n",
+ pr_cont("type=bt-656/1120, width=%u-%u, height=%u-%u, pixelclock=%llu-%llu, standards=0x%x, capabilities=0x%x\n",
p->bt.min_width, p->bt.max_width,
p->bt.min_height, p->bt.max_height,
p->bt.min_pixelclock, p->bt.max_pixelclock,
@@ -805,8 +768,7 @@ static void v4l_print_event(const void *arg, bool write_only)
const struct v4l2_event *p = arg;
const struct v4l2_event_ctrl *c;
- pr_cont("type=0x%x, pending=%u, sequence=%u, id=%u, "
- "timestamp=%lu.%9.9lu\n",
+ pr_cont("type=0x%x, pending=%u, sequence=%u, id=%u, timestamp=%lu.%9.9lu\n",
p->type, p->pending, p->sequence, p->id,
p->timestamp.tv_sec, p->timestamp.tv_nsec);
switch (p->type) {
@@ -822,8 +784,7 @@ static void v4l_print_event(const void *arg, bool write_only)
pr_cont("value64=%lld, ", c->value64);
else
pr_cont("value=%d, ", c->value);
- pr_cont("flags=0x%x, minimum=%d, maximum=%d, step=%d, "
- "default_value=%d\n",
+ pr_cont("flags=0x%x, minimum=%d, maximum=%d, step=%d, default_value=%d\n",
c->flags, c->minimum, c->maximum,
c->step, c->default_value);
break;
@@ -859,8 +820,7 @@ static void v4l_print_freq_band(const void *arg, bool write_only)
{
const struct v4l2_frequency_band *p = arg;
- pr_cont("tuner=%u, type=%u, index=%u, capability=0x%x, "
- "rangelow=%u, rangehigh=%u, modulation=0x%x\n",
+ pr_cont("tuner=%u, type=%u, index=%u, capability=0x%x, rangelow=%u, rangehigh=%u, modulation=0x%x\n",
p->tuner, p->type, p->index,
p->capability, p->rangelow,
p->rangehigh, p->modulation);
diff --git a/drivers/media/v4l2-core/videobuf-core.c b/drivers/media/v4l2-core/videobuf-core.c
index def84753c4c3..1dbf6f7785bb 100644
--- a/drivers/media/v4l2-core/videobuf-core.c
+++ b/drivers/media/v4l2-core/videobuf-core.c
@@ -572,8 +572,7 @@ int videobuf_qbuf(struct videobuf_queue *q, struct v4l2_buffer *b)
switch (b->memory) {
case V4L2_MEMORY_MMAP:
if (0 == buf->baddr) {
- dprintk(1, "qbuf: mmap requested "
- "but buffer addr is zero!\n");
+ dprintk(1, "qbuf: mmap requested but buffer addr is zero!\n");
goto done;
}
if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT
diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c
index 21900202ff83..52d8b5388f56 100644
--- a/drivers/media/v4l2-core/videobuf2-core.c
+++ b/drivers/media/v4l2-core/videobuf2-core.c
@@ -358,8 +358,7 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory,
if (memory == VB2_MEMORY_MMAP) {
ret = __vb2_buf_mem_alloc(vb);
if (ret) {
- dprintk(1, "failed allocating memory for "
- "buffer %d\n", buffer);
+ dprintk(1, "failed allocating memory for buffer %d\n", buffer);
q->bufs[vb->index] = NULL;
kfree(vb);
break;
@@ -372,8 +371,7 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory,
*/
ret = call_vb_qop(vb, buf_init, vb);
if (ret) {
- dprintk(1, "buffer %d %p initialization"
- " failed\n", buffer, vb);
+ dprintk(1, "buffer %d %p initialization failed\n", buffer, vb);
__vb2_buf_mem_free(vb);
q->bufs[vb->index] = NULL;
kfree(vb);
@@ -997,13 +995,11 @@ static int __qbuf_userptr(struct vb2_buffer *vb, const void *pb)
&& vb->planes[plane].length == planes[plane].length)
continue;
- dprintk(3, "userspace address for plane %d changed, "
- "reacquiring memory\n", plane);
+ dprintk(3, "userspace address for plane %d changed, reacquiring memory\n", plane);
/* Check if the provided plane buffer is large enough */
if (planes[plane].length < vb->planes[plane].min_length) {
- dprintk(1, "provided buffer size %u is less than "
- "setup size %u for plane %d\n",
+ dprintk(1, "provided buffer size %u is less than setup size %u for plane %d\n",
planes[plane].length,
vb->planes[plane].min_length,
plane);
@@ -1032,8 +1028,7 @@ static int __qbuf_userptr(struct vb2_buffer *vb, const void *pb)
planes[plane].m.userptr,
planes[plane].length, dma_dir);
if (IS_ERR(mem_priv)) {
- dprintk(1, "failed acquiring userspace "
- "memory for plane %d\n", plane);
+ dprintk(1, "failed acquiring userspace memory for plane %d\n", plane);
ret = PTR_ERR(mem_priv);
goto err;
}
@@ -1123,8 +1118,7 @@ static int __qbuf_dmabuf(struct vb2_buffer *vb, const void *pb)
planes[plane].length = dbuf->size;
if (planes[plane].length < vb->planes[plane].min_length) {
- dprintk(1, "invalid dmabuf length %u for plane %d, "
- "minimum length %u\n",
+ dprintk(1, "invalid dmabuf length %u for plane %d, minimum length %u\n",
planes[plane].length, plane,
vb->planes[plane].min_length);
dma_buf_put(dbuf);
@@ -1472,8 +1466,7 @@ static int __vb2_wait_for_done_vb(struct vb2_queue *q, int nonblocking)
}
if (nonblocking) {
- dprintk(1, "nonblocking and no buffers to dequeue, "
- "will not wait\n");
+ dprintk(1, "nonblocking and no buffers to dequeue, will not wait\n");
return -EAGAIN;
}
diff --git a/drivers/media/v4l2-core/videobuf2-v4l2.c b/drivers/media/v4l2-core/videobuf2-v4l2.c
index 52ef8833f6b6..2586e40f5e60 100644
--- a/drivers/media/v4l2-core/videobuf2-v4l2.c
+++ b/drivers/media/v4l2-core/videobuf2-v4l2.c
@@ -60,14 +60,12 @@ static int __verify_planes_array(struct vb2_buffer *vb, const struct v4l2_buffer
/* Is memory for copying plane information present? */
if (b->m.planes == NULL) {
- dprintk(1, "multi-planar buffer passed but "
- "planes array not provided\n");
+ dprintk(1, "multi-planar buffer passed but planes array not provided\n");
return -EINVAL;
}
if (b->length < vb->num_planes || b->length > VB2_MAX_PLANES) {
- dprintk(1, "incorrect planes array length, "
- "expected %d, got %d\n", vb->num_planes, b->length);
+ dprintk(1, "incorrect planes array length, expected %d, got %d\n", vb->num_planes, b->length);
return -EINVAL;
}
@@ -316,8 +314,7 @@ static int __fill_vb2_buffer(struct vb2_buffer *vb,
* that just says that it is either a top or a bottom field,
* but not which of the two it is.
*/
- dprintk(1, "the field is incorrectly set to ALTERNATE "
- "for an output buffer\n");
+ dprintk(1, "the field is incorrectly set to ALTERNATE for an output buffer\n");
return -EINVAL;
}
vb->timestamp = 0;
diff --git a/drivers/media/v4l2-core/videobuf2-vmalloc.c b/drivers/media/v4l2-core/videobuf2-vmalloc.c
index ab3227b75c84..3f778147cdef 100644
--- a/drivers/media/v4l2-core/videobuf2-vmalloc.c
+++ b/drivers/media/v4l2-core/videobuf2-vmalloc.c
@@ -151,8 +151,7 @@ static void *vb2_vmalloc_vaddr(void *buf_priv)
struct vb2_vmalloc_buf *buf = buf_priv;
if (!buf->vaddr) {
- pr_err("Address of an unallocated plane requested "
- "or cannot map user pointer\n");
+ pr_err("Address of an unallocated plane requested or cannot map user pointer\n");
return NULL;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 52/57] [media] common: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (50 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 51/57] [media] v4l2-core: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 53/57] [media] i2c: " Mauro Carvalho Chehab
` (5 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/common/tveeprom.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/media/common/tveeprom.c b/drivers/media/common/tveeprom.c
index 47da0378cad8..e0e2cb706087 100644
--- a/drivers/media/common/tveeprom.c
+++ b/drivers/media/common/tveeprom.c
@@ -510,8 +510,7 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
len = eeprom_data[i] & 0x07;
++i;
} else {
- tveeprom_warn("Encountered bad packet header [%02x]. "
- "Corrupt or not a Hauppauge eeprom.\n",
+ tveeprom_warn("Encountered bad packet header [%02x]. Corrupt or not a Hauppauge eeprom.\n",
eeprom_data[i]);
return;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 53/57] [media] i2c: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (51 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 52/57] [media] common: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-17 13:54 ` Laurent Pinchart
2016-10-14 20:20 ` [PATCH 54/57] [media] platform: " Mauro Carvalho Chehab
` (4 subsequent siblings)
57 siblings, 1 reply; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Laurent Pinchart, Mauro Carvalho Chehab,
Arnd Bergmann, Ezequiel Garcia, Kevin Fitch, Hans Verkuil,
Markus Elfring, Javier Martinez Canillas, Lad, Prabhakar,
Sakari Ailus
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/i2c/as3645a.c | 9 +++------
drivers/media/i2c/msp3400-kthreads.c | 3 +--
drivers/media/i2c/mt9m032.c | 3 +--
drivers/media/i2c/mt9p031.c | 3 +--
drivers/media/i2c/saa7115.c | 3 +--
drivers/media/i2c/saa717x.c | 3 +--
drivers/media/i2c/ths8200.c | 4 +---
drivers/media/i2c/tvp5150.c | 3 +--
drivers/media/i2c/tvp7002.c | 3 +--
drivers/media/i2c/upd64083.c | 3 +--
10 files changed, 12 insertions(+), 25 deletions(-)
diff --git a/drivers/media/i2c/as3645a.c b/drivers/media/i2c/as3645a.c
index 2e90e4094b79..95fcb8f68a1a 100644
--- a/drivers/media/i2c/as3645a.c
+++ b/drivers/media/i2c/as3645a.c
@@ -299,8 +299,7 @@ static int as3645a_read_fault(struct as3645a *flash)
dev_dbg(&client->dev, "Inductor Peak limit fault\n");
if (rval & AS_FAULT_INFO_INDICATOR_LED)
- dev_dbg(&client->dev, "Indicator LED fault: "
- "Short circuit or open loop\n");
+ dev_dbg(&client->dev, "Indicator LED fault: Short circuit or open loop\n");
dev_dbg(&client->dev, "%u connected LEDs\n",
rval & AS_FAULT_INFO_LED_AMOUNT ? 2 : 1);
@@ -315,8 +314,7 @@ static int as3645a_read_fault(struct as3645a *flash)
dev_dbg(&client->dev, "Short circuit fault\n");
if (rval & AS_FAULT_INFO_OVER_VOLTAGE)
- dev_dbg(&client->dev, "Over voltage fault: "
- "Indicates missing capacitor or open connection\n");
+ dev_dbg(&client->dev, "Over voltage fault: Indicates missing capacitor or open connection\n");
return rval;
}
@@ -588,8 +586,7 @@ static int as3645a_registered(struct v4l2_subdev *sd)
/* Verify the chip model and version. */
if (model != 0x01 || rfu != 0x00) {
- dev_err(&client->dev, "AS3645A not detected "
- "(model %d rfu %d)\n", model, rfu);
+ dev_err(&client->dev, "AS3645A not detected (model %d rfu %d)\n", model, rfu);
rval = -ENODEV;
goto power_off;
}
diff --git a/drivers/media/i2c/msp3400-kthreads.c b/drivers/media/i2c/msp3400-kthreads.c
index 17120804fab7..022bea68cbf0 100644
--- a/drivers/media/i2c/msp3400-kthreads.c
+++ b/drivers/media/i2c/msp3400-kthreads.c
@@ -775,8 +775,7 @@ int msp3410d_thread(void *data)
if (msp_amsound && !state->radio &&
(state->v4l2_std & V4L2_STD_SECAM) && (val != 0x0009)) {
/* autodetection has failed, let backup */
- v4l_dbg(1, msp_debug, client, "autodetection failed,"
- " switching to backup standard: %s (0x%04x)\n",
+ v4l_dbg(1, msp_debug, client, "autodetection failed, switching to backup standard: %s (0x%04x)\n",
msp_stdlist[8].name ?
msp_stdlist[8].name : "unknown", val);
state->std = val = 0x0009;
diff --git a/drivers/media/i2c/mt9m032.c b/drivers/media/i2c/mt9m032.c
index da076796999e..a045425887d5 100644
--- a/drivers/media/i2c/mt9m032.c
+++ b/drivers/media/i2c/mt9m032.c
@@ -746,8 +746,7 @@ static int mt9m032_probe(struct i2c_client *client,
chip_version = mt9m032_read(client, MT9M032_CHIP_VERSION);
if (chip_version != MT9M032_CHIP_VERSION_VALUE) {
- dev_err(&client->dev, "MT9M032 not detected, wrong version "
- "0x%04x\n", chip_version);
+ dev_err(&client->dev, "MT9M032 not detected, wrong version 0x%04x\n", chip_version);
ret = -ENODEV;
goto error_sensor;
}
diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c
index 237737fec09c..4d7b56b96a92 100644
--- a/drivers/media/i2c/mt9p031.c
+++ b/drivers/media/i2c/mt9p031.c
@@ -929,8 +929,7 @@ static int mt9p031_registered(struct v4l2_subdev *subdev)
mt9p031_power_off(mt9p031);
if (data != MT9P031_CHIP_VERSION_VALUE) {
- dev_err(&client->dev, "MT9P031 not detected, wrong version "
- "0x%04x\n", data);
+ dev_err(&client->dev, "MT9P031 not detected, wrong version 0x%04x\n", data);
return -ENODEV;
}
diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c
index 58062b41c923..5db914b7d5ae 100644
--- a/drivers/media/i2c/saa7115.c
+++ b/drivers/media/i2c/saa7115.c
@@ -53,8 +53,7 @@
#define VRES_60HZ (480+16)
MODULE_DESCRIPTION("Philips SAA7111/SAA7113/SAA7114/SAA7115/SAA7118 video decoder driver");
-MODULE_AUTHOR( "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, "
- "Hans Verkuil, Mauro Carvalho Chehab");
+MODULE_AUTHOR( "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, Hans Verkuil, Mauro Carvalho Chehab");
MODULE_LICENSE("GPL");
static bool debug;
diff --git a/drivers/media/i2c/saa717x.c b/drivers/media/i2c/saa717x.c
index 1baca37f3eb6..b9eb152cf4e9 100644
--- a/drivers/media/i2c/saa717x.c
+++ b/drivers/media/i2c/saa717x.c
@@ -735,8 +735,7 @@ static void get_inf_dev_status(struct v4l2_subdev *sd,
reg_data3, stdres[reg_data3 & 0x1f],
(reg_data3 & 0x000020) ? ",stereo" : "",
(reg_data3 & 0x000040) ? ",dual" : "");
- v4l2_dbg(1, debug, sd, "detailed status: "
- "%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s\n",
+ v4l2_dbg(1, debug, sd, "detailed status: %s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s\n",
(reg_data3 & 0x000080) ? " A2/EIAJ pilot tone " : "",
(reg_data3 & 0x000100) ? " A2/EIAJ dual " : "",
(reg_data3 & 0x000200) ? " A2/EIAJ stereo " : "",
diff --git a/drivers/media/i2c/ths8200.c b/drivers/media/i2c/ths8200.c
index 42340e364cea..69b6c32f4690 100644
--- a/drivers/media/i2c/ths8200.c
+++ b/drivers/media/i2c/ths8200.c
@@ -351,9 +351,7 @@ static void ths8200_setup(struct v4l2_subdev *sd, struct v4l2_bt_timings *bt)
/* leave reset */
ths8200_s_stream(sd, true);
- v4l2_dbg(1, debug, sd, "%s: frame %dx%d, polarity %d\n"
- "horizontal: front porch %d, back porch %d, sync %d\n"
- "vertical: sync %d\n", __func__, htotal(bt), vtotal(bt),
+ v4l2_dbg(1, debug, sd, "%s: frame %dx%d, polarity %d\nhorizontal: front porch %d, back porch %d, sync %d\nvertical: sync %d\n", __func__, htotal(bt), vtotal(bt),
polarity, bt->hfrontporch, bt->hbackporch,
bt->hsync, bt->vsync);
}
diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index 4740da39d698..827d276c8f47 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -280,8 +280,7 @@ static inline void tvp5150_selmux(struct v4l2_subdev *sd)
break;
}
- v4l2_dbg(1, debug, sd, "Selecting video route: route input=%i, output=%i "
- "=> tvp5150 input=%i, opmode=%i\n",
+ v4l2_dbg(1, debug, sd, "Selecting video route: route input=%i, output=%i => tvp5150 input=%i, opmode=%i\n",
decoder->input, decoder->output,
input, opmode);
diff --git a/drivers/media/i2c/tvp7002.c b/drivers/media/i2c/tvp7002.c
index 3dc3341c4896..f21bda76b5ab 100644
--- a/drivers/media/i2c/tvp7002.c
+++ b/drivers/media/i2c/tvp7002.c
@@ -1057,8 +1057,7 @@ static int tvp7002_remove(struct i2c_client *c)
struct v4l2_subdev *sd = i2c_get_clientdata(c);
struct tvp7002 *device = to_tvp7002(sd);
- v4l2_dbg(1, debug, sd, "Removing tvp7002 adapter"
- "on address 0x%x\n", c->addr);
+ v4l2_dbg(1, debug, sd, "Removing tvp7002 adapteron address 0x%x\n", c->addr);
v4l2_async_unregister_subdev(&device->sd);
#if defined(CONFIG_MEDIA_CONTROLLER)
media_entity_cleanup(&device->sd.entity);
diff --git a/drivers/media/i2c/upd64083.c b/drivers/media/i2c/upd64083.c
index 77f122f2e3c9..9b080ec4e489 100644
--- a/drivers/media/i2c/upd64083.c
+++ b/drivers/media/i2c/upd64083.c
@@ -139,8 +139,7 @@ static int upd64083_log_status(struct v4l2_subdev *sd)
u8 buf[7];
i2c_master_recv(client, buf, 7);
- v4l2_info(sd, "Status: SA00=%02x SA01=%02x SA02=%02x SA03=%02x "
- "SA04=%02x SA05=%02x SA06=%02x\n",
+ v4l2_info(sd, "Status: SA00=%02x SA01=%02x SA02=%02x SA03=%02x SA04=%02x SA05=%02x SA06=%02x\n",
buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
return 0;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* Re: [PATCH 53/57] [media] i2c: don't break long lines
2016-10-14 20:20 ` [PATCH 53/57] [media] i2c: " Mauro Carvalho Chehab
@ 2016-10-17 13:54 ` Laurent Pinchart
0 siblings, 0 replies; 79+ messages in thread
From: Laurent Pinchart @ 2016-10-17 13:54 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Media Mailing List, Mauro Carvalho Chehab,
Mauro Carvalho Chehab, Arnd Bergmann, Ezequiel Garcia,
Kevin Fitch, Hans Verkuil, Markus Elfring,
Javier Martinez Canillas, Lad, Prabhakar, Sakari Ailus
Hi Mauro,
Thank you for the patch.
On Friday 14 Oct 2016 17:20:41 Mauro Carvalho Chehab wrote:
> Due to the 80-cols checkpatch warnings, several strings
> were broken into multiple lines. This is not considered
> a good practice anymore, as it makes harder to grep for
> strings at the source code. So, join those continuation
> lines.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
> ---
> drivers/media/i2c/as3645a.c | 9 +++------
> drivers/media/i2c/msp3400-kthreads.c | 3 +--
> drivers/media/i2c/mt9m032.c | 3 +--
> drivers/media/i2c/mt9p031.c | 3 +--
> drivers/media/i2c/saa7115.c | 3 +--
> drivers/media/i2c/saa717x.c | 3 +--
> drivers/media/i2c/ths8200.c | 4 +---
> drivers/media/i2c/tvp5150.c | 3 +--
> drivers/media/i2c/tvp7002.c | 3 +--
> drivers/media/i2c/upd64083.c | 3 +--
> 10 files changed, 12 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/media/i2c/as3645a.c b/drivers/media/i2c/as3645a.c
> index 2e90e4094b79..95fcb8f68a1a 100644
> --- a/drivers/media/i2c/as3645a.c
> +++ b/drivers/media/i2c/as3645a.c
> @@ -299,8 +299,7 @@ static int as3645a_read_fault(struct as3645a *flash)
> dev_dbg(&client->dev, "Inductor Peak limit fault\n");
>
> if (rval & AS_FAULT_INFO_INDICATOR_LED)
> - dev_dbg(&client->dev, "Indicator LED fault: "
> - "Short circuit or open loop\n");
> + dev_dbg(&client->dev, "Indicator LED fault: Short circuit or
open
> loop\n");
>
> dev_dbg(&client->dev, "%u connected LEDs\n",
> rval & AS_FAULT_INFO_LED_AMOUNT ? 2 : 1);
> @@ -315,8 +314,7 @@ static int as3645a_read_fault(struct as3645a *flash)
> dev_dbg(&client->dev, "Short circuit fault\n");
>
> if (rval & AS_FAULT_INFO_OVER_VOLTAGE)
> - dev_dbg(&client->dev, "Over voltage fault: "
> - "Indicates missing capacitor or open connection\n");
> + dev_dbg(&client->dev, "Over voltage fault: Indicates missing
capacitor or
> open connection\n");
>
> return rval;
> }
> @@ -588,8 +586,7 @@ static int as3645a_registered(struct v4l2_subdev *sd)
>
> /* Verify the chip model and version. */
> if (model != 0x01 || rfu != 0x00) {
> - dev_err(&client->dev, "AS3645A not detected "
> - "(model %d rfu %d)\n", model, rfu);
> + dev_err(&client->dev, "AS3645A not detected (model %d rfu
%d)\n", model,
> rfu); rval = -ENODEV;
> goto power_off;
> }
> diff --git a/drivers/media/i2c/msp3400-kthreads.c
> b/drivers/media/i2c/msp3400-kthreads.c index 17120804fab7..022bea68cbf0
> 100644
> --- a/drivers/media/i2c/msp3400-kthreads.c
> +++ b/drivers/media/i2c/msp3400-kthreads.c
> @@ -775,8 +775,7 @@ int msp3410d_thread(void *data)
> if (msp_amsound && !state->radio &&
> (state->v4l2_std & V4L2_STD_SECAM) && (val != 0x0009)) {
> /* autodetection has failed, let backup */
> - v4l_dbg(1, msp_debug, client, "autodetection failed,"
> - " switching to backup standard: %s
(0x%04x)\n",
> + v4l_dbg(1, msp_debug, client, "autodetection failed,
switching to backup
> standard: %s (0x%04x)\n", msp_stdlist[8].name ?
> msp_stdlist[8].name : "unknown", val);
> state->std = val = 0x0009;
> diff --git a/drivers/media/i2c/mt9m032.c b/drivers/media/i2c/mt9m032.c
> index da076796999e..a045425887d5 100644
> --- a/drivers/media/i2c/mt9m032.c
> +++ b/drivers/media/i2c/mt9m032.c
> @@ -746,8 +746,7 @@ static int mt9m032_probe(struct i2c_client *client,
>
> chip_version = mt9m032_read(client, MT9M032_CHIP_VERSION);
> if (chip_version != MT9M032_CHIP_VERSION_VALUE) {
> - dev_err(&client->dev, "MT9M032 not detected, wrong version "
> - "0x%04x\n", chip_version);
> + dev_err(&client->dev, "MT9M032 not detected, wrong version
0x%04x\n",
> chip_version); ret = -ENODEV;
> goto error_sensor;
> }
> diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c
> index 237737fec09c..4d7b56b96a92 100644
> --- a/drivers/media/i2c/mt9p031.c
> +++ b/drivers/media/i2c/mt9p031.c
> @@ -929,8 +929,7 @@ static int mt9p031_registered(struct v4l2_subdev
> *subdev) mt9p031_power_off(mt9p031);
>
> if (data != MT9P031_CHIP_VERSION_VALUE) {
> - dev_err(&client->dev, "MT9P031 not detected, wrong version "
> - "0x%04x\n", data);
> + dev_err(&client->dev, "MT9P031 not detected, wrong version
0x%04x\n",
> data); return -ENODEV;
> }
>
> diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c
> index 58062b41c923..5db914b7d5ae 100644
> --- a/drivers/media/i2c/saa7115.c
> +++ b/drivers/media/i2c/saa7115.c
> @@ -53,8 +53,7 @@
> #define VRES_60HZ (480+16)
>
> MODULE_DESCRIPTION("Philips SAA7111/SAA7113/SAA7114/SAA7115/SAA7118 video
> decoder driver"); -MODULE_AUTHOR( "Maxim Yevtyushkin, Kevin Thayer, Chris
> Kennedy, " - "Hans Verkuil, Mauro Carvalho Chehab");
> +MODULE_AUTHOR( "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, Hans
> Verkuil, Mauro Carvalho Chehab"); MODULE_LICENSE("GPL");
>
> static bool debug;
> diff --git a/drivers/media/i2c/saa717x.c b/drivers/media/i2c/saa717x.c
> index 1baca37f3eb6..b9eb152cf4e9 100644
> --- a/drivers/media/i2c/saa717x.c
> +++ b/drivers/media/i2c/saa717x.c
> @@ -735,8 +735,7 @@ static void get_inf_dev_status(struct v4l2_subdev *sd,
> reg_data3, stdres[reg_data3 & 0x1f],
> (reg_data3 & 0x000020) ? ",stereo" : "",
> (reg_data3 & 0x000040) ? ",dual" : "");
> - v4l2_dbg(1, debug, sd, "detailed status: "
> - "%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s\n",
> + v4l2_dbg(1, debug, sd, "detailed status:
> %s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s\n", (reg_data3 & 0x000080) ? "
> A2/EIAJ pilot tone " : "",
> (reg_data3 & 0x000100) ? " A2/EIAJ dual " : "",
> (reg_data3 & 0x000200) ? " A2/EIAJ stereo " : "",
> diff --git a/drivers/media/i2c/ths8200.c b/drivers/media/i2c/ths8200.c
> index 42340e364cea..69b6c32f4690 100644
> --- a/drivers/media/i2c/ths8200.c
> +++ b/drivers/media/i2c/ths8200.c
> @@ -351,9 +351,7 @@ static void ths8200_setup(struct v4l2_subdev *sd, struct
> v4l2_bt_timings *bt) /* leave reset */
> ths8200_s_stream(sd, true);
>
> - v4l2_dbg(1, debug, sd, "%s: frame %dx%d, polarity %d\n"
> - "horizontal: front porch %d, back porch %d, sync %d\n"
> - "vertical: sync %d\n", __func__, htotal(bt), vtotal(bt),
> + v4l2_dbg(1, debug, sd, "%s: frame %dx%d, polarity %d\nhorizontal:
front
> porch %d, back porch %d, sync %d\nvertical: sync %d\n", __func__,
> htotal(bt), vtotal(bt), polarity, bt->hfrontporch, bt->hbackporch,
> bt->hsync, bt->vsync);
> }
> diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
> index 4740da39d698..827d276c8f47 100644
> --- a/drivers/media/i2c/tvp5150.c
> +++ b/drivers/media/i2c/tvp5150.c
> @@ -280,8 +280,7 @@ static inline void tvp5150_selmux(struct v4l2_subdev
> *sd) break;
> }
>
> - v4l2_dbg(1, debug, sd, "Selecting video route: route input=%i,
output=%i "
> - "=> tvp5150 input=%i, opmode=%i\n",
> + v4l2_dbg(1, debug, sd, "Selecting video route: route input=%i,
output=%i
> => tvp5150 input=%i, opmode=%i\n", decoder->input, decoder->output,
> input, opmode);
>
> diff --git a/drivers/media/i2c/tvp7002.c b/drivers/media/i2c/tvp7002.c
> index 3dc3341c4896..f21bda76b5ab 100644
> --- a/drivers/media/i2c/tvp7002.c
> +++ b/drivers/media/i2c/tvp7002.c
> @@ -1057,8 +1057,7 @@ static int tvp7002_remove(struct i2c_client *c)
> struct v4l2_subdev *sd = i2c_get_clientdata(c);
> struct tvp7002 *device = to_tvp7002(sd);
>
> - v4l2_dbg(1, debug, sd, "Removing tvp7002 adapter"
> - "on address 0x%x\n", c->addr);
> + v4l2_dbg(1, debug, sd, "Removing tvp7002 adapteron address 0x%x\n",
> c->addr);
You could fix errors in commit messages while at it, there's clearly a space
missing between "adapter" and "on".
> v4l2_async_unregister_subdev(&device->sd);
> #if defined(CONFIG_MEDIA_CONTROLLER)
> media_entity_cleanup(&device->sd.entity);
> diff --git a/drivers/media/i2c/upd64083.c b/drivers/media/i2c/upd64083.c
> index 77f122f2e3c9..9b080ec4e489 100644
> --- a/drivers/media/i2c/upd64083.c
> +++ b/drivers/media/i2c/upd64083.c
> @@ -139,8 +139,7 @@ static int upd64083_log_status(struct v4l2_subdev *sd)
> u8 buf[7];
>
> i2c_master_recv(client, buf, 7);
> - v4l2_info(sd, "Status: SA00=%02x SA01=%02x SA02=%02x SA03=%02x "
> - "SA04=%02x SA05=%02x SA06=%02x\n",
> + v4l2_info(sd, "Status: SA00=%02x SA01=%02x SA02=%02x SA03=%02x
SA04=%02x
> SA05=%02x SA06=%02x\n", buf[0], buf[1], buf[2], buf[3], buf[4], buf[5],
> buf[6]);
I have some doubts regarding whether it makes sense to apply the rule
explained in the commit message blindly. In this specific case for instance I
very much doubt anyone will grep the source code for "SA03=%02x SA04=%02x".
I'm sure this isn't the only case in this patch series where splitting
messages in multiple lines isn't a problem.
> return 0;
> }
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 79+ messages in thread
* [PATCH 54/57] [media] platform: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (52 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 53/57] [media] i2c: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 21:02 ` Robert Jarzmik
2016-10-17 13:45 ` Laurent Pinchart
2016-10-14 20:20 ` [PATCH 55/57] [media] radio: " Mauro Carvalho Chehab
` (3 subsequent siblings)
57 siblings, 2 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Hans Verkuil,
Laurent Pinchart, Geunyoung Kim, Inki Dae, Junghak Sung,
Julia Lawall, Robert Jarzmik, Guennadi Liakhovetski, Wei Yongjun,
Arnd Bergmann
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/platform/mx2_emmaprp.c | 3 +--
drivers/media/platform/pxa_camera.c | 6 ++----
drivers/media/platform/via-camera.c | 7 ++-----
3 files changed, 5 insertions(+), 11 deletions(-)
diff --git a/drivers/media/platform/mx2_emmaprp.c b/drivers/media/platform/mx2_emmaprp.c
index e68d271b10af..ea572718a638 100644
--- a/drivers/media/platform/mx2_emmaprp.c
+++ b/drivers/media/platform/mx2_emmaprp.c
@@ -724,8 +724,7 @@ static int emmaprp_buf_prepare(struct vb2_buffer *vb)
q_data = get_q_data(ctx, vb->vb2_queue->type);
if (vb2_plane_size(vb, 0) < q_data->sizeimage) {
- dprintk(ctx->dev, "%s data will not fit into plane"
- "(%lu < %lu)\n", __func__,
+ dprintk(ctx->dev, "%s data will not fit into plane(%lu < %lu)\n", __func__,
vb2_plane_size(vb, 0),
(long)q_data->sizeimage);
return -EINVAL;
diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c
index c12209c701d3..bcdac4932fb1 100644
--- a/drivers/media/platform/pxa_camera.c
+++ b/drivers/media/platform/pxa_camera.c
@@ -2347,8 +2347,7 @@ static int pxa_camera_probe(struct platform_device *pdev)
* Platform hasn't set available data widths. This is bad.
* Warn and use a default.
*/
- dev_warn(&pdev->dev, "WARNING! Platform hasn't set available "
- "data widths, using default 10 bit\n");
+ dev_warn(&pdev->dev, "WARNING! Platform hasn't set available data widths, using default 10 bit\n");
pcdev->platform_flags |= PXA_CAMERA_DATAWIDTH_10;
}
if (pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_8)
@@ -2359,8 +2358,7 @@ static int pxa_camera_probe(struct platform_device *pdev)
pcdev->width_flags |= 1 << 9;
if (!pcdev->mclk) {
dev_warn(&pdev->dev,
- "mclk == 0! Please, fix your platform data. "
- "Using default 20MHz\n");
+ "mclk == 0! Please, fix your platform data. Using default 20MHz\n");
pcdev->mclk = 20000000;
}
diff --git a/drivers/media/platform/via-camera.c b/drivers/media/platform/via-camera.c
index 7ca12deba89c..e16f70a5df1d 100644
--- a/drivers/media/platform/via-camera.c
+++ b/drivers/media/platform/via-camera.c
@@ -39,15 +39,12 @@ MODULE_LICENSE("GPL");
static bool flip_image;
module_param(flip_image, bool, 0444);
MODULE_PARM_DESC(flip_image,
- "If set, the sensor will be instructed to flip the image "
- "vertically.");
+ "If set, the sensor will be instructed to flip the image vertically.");
static bool override_serial;
module_param(override_serial, bool, 0444);
MODULE_PARM_DESC(override_serial,
- "The camera driver will normally refuse to load if "
- "the XO 1.5 serial port is enabled. Set this option "
- "to force-enable the camera.");
+ "The camera driver will normally refuse to load if the XO 1.5 serial port is enabled. Set this option to force-enable the camera.");
/*
* The structure describing our camera.
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* Re: [PATCH 54/57] [media] platform: don't break long lines
2016-10-14 20:20 ` [PATCH 54/57] [media] platform: " Mauro Carvalho Chehab
@ 2016-10-14 21:02 ` Robert Jarzmik
2016-10-17 13:45 ` Laurent Pinchart
1 sibling, 0 replies; 79+ messages in thread
From: Robert Jarzmik @ 2016-10-14 21:02 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Media Mailing List, Mauro Carvalho Chehab,
Mauro Carvalho Chehab, Hans Verkuil, Laurent Pinchart,
Geunyoung Kim, Inki Dae, Junghak Sung, Julia Lawall,
Guennadi Liakhovetski, Wei Yongjun, Arnd Bergmann
Mauro Carvalho Chehab <mchehab@s-opensource.com> writes:
> Due to the 80-cols checkpatch warnings, several strings
> were broken into multiple lines. This is not considered
> a good practice anymore, as it makes harder to grep for
> strings at the source code. So, join those continuation
> lines.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
> ---
> drivers/media/platform/mx2_emmaprp.c | 3 +--
> drivers/media/platform/pxa_camera.c | 6 ++----
> drivers/media/platform/via-camera.c | 7 ++-----
> 3 files changed, 5 insertions(+), 11 deletions(-)
For pxa_camera, FWIW:
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cheers.
--
Robert
^ permalink raw reply [flat|nested] 79+ messages in thread
* Re: [PATCH 54/57] [media] platform: don't break long lines
2016-10-14 20:20 ` [PATCH 54/57] [media] platform: " Mauro Carvalho Chehab
2016-10-14 21:02 ` Robert Jarzmik
@ 2016-10-17 13:45 ` Laurent Pinchart
2016-10-17 19:39 ` Andrey Utkin
1 sibling, 1 reply; 79+ messages in thread
From: Laurent Pinchart @ 2016-10-17 13:45 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Media Mailing List, Mauro Carvalho Chehab,
Mauro Carvalho Chehab, Hans Verkuil, Geunyoung Kim, Inki Dae,
Junghak Sung, Julia Lawall, Robert Jarzmik,
Guennadi Liakhovetski, Wei Yongjun, Arnd Bergmann
Hi Mauro,
Thank you for the patch.
On Friday 14 Oct 2016 17:20:42 Mauro Carvalho Chehab wrote:
> Due to the 80-cols checkpatch warnings, several strings
> were broken into multiple lines. This is not considered
> a good practice anymore, as it makes harder to grep for
> strings at the source code. So, join those continuation
> lines.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
> ---
> drivers/media/platform/mx2_emmaprp.c | 3 +--
> drivers/media/platform/pxa_camera.c | 6 ++----
> drivers/media/platform/via-camera.c | 7 ++-----
> 3 files changed, 5 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/media/platform/mx2_emmaprp.c
> b/drivers/media/platform/mx2_emmaprp.c index e68d271b10af..ea572718a638
> 100644
> --- a/drivers/media/platform/mx2_emmaprp.c
> +++ b/drivers/media/platform/mx2_emmaprp.c
> @@ -724,8 +724,7 @@ static int emmaprp_buf_prepare(struct vb2_buffer *vb)
> q_data = get_q_data(ctx, vb->vb2_queue->type);
>
> if (vb2_plane_size(vb, 0) < q_data->sizeimage) {
> - dprintk(ctx->dev, "%s data will not fit into plane"
> - "(%lu < %lu)\n", __func__,
> + dprintk(ctx->dev, "%s data will not fit into plane(%lu <
%lu)\n",
> __func__, vb2_plane_size(vb, 0),
> (long)q_data->sizeimage);
If you really want to perform such a change, let's not make lines
unnecessarily long either. You should add a line break after the first and
second argument:
dprintk(ctx->dev,
"%s data will not fit into plane(%lu < %lu)\n",
__func__, vb2_plane_size(vb, 0),
(long)q_data->sizeimage);
And everything will fit in 80 columns.
> return -EINVAL;
> diff --git a/drivers/media/platform/pxa_camera.c
> b/drivers/media/platform/pxa_camera.c index c12209c701d3..bcdac4932fb1
> 100644
> --- a/drivers/media/platform/pxa_camera.c
> +++ b/drivers/media/platform/pxa_camera.c
> @@ -2347,8 +2347,7 @@ static int pxa_camera_probe(struct platform_device
> *pdev) * Platform hasn't set available data widths. This is bad.
> * Warn and use a default.
> */
> - dev_warn(&pdev->dev, "WARNING! Platform hasn't set available "
> - "data widths, using default 10 bit\n");
> + dev_warn(&pdev->dev, "WARNING! Platform hasn't set available
data widths,
> using default 10 bit\n");
Same comment here, you should add a line break after the first argument.
I assume the same comment applied to the 56 other patches in the series.
> pcdev->platform_flags |= PXA_CAMERA_DATAWIDTH_10;
> }
> if (pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_8)
> @@ -2359,8 +2358,7 @@ static int pxa_camera_probe(struct platform_device
> *pdev) pcdev->width_flags |= 1 << 9;
> if (!pcdev->mclk) {
> dev_warn(&pdev->dev,
> - "mclk == 0! Please, fix your platform data. "
> - "Using default 20MHz\n");
> + "mclk == 0! Please, fix your platform data. Using
default 20MHz\n");
> pcdev->mclk = 20000000;
> }
>
> diff --git a/drivers/media/platform/via-camera.c
> b/drivers/media/platform/via-camera.c index 7ca12deba89c..e16f70a5df1d
> 100644
> --- a/drivers/media/platform/via-camera.c
> +++ b/drivers/media/platform/via-camera.c
> @@ -39,15 +39,12 @@ MODULE_LICENSE("GPL");
> static bool flip_image;
> module_param(flip_image, bool, 0444);
> MODULE_PARM_DESC(flip_image,
> - "If set, the sensor will be instructed to flip the image "
> - "vertically.");
> + "If set, the sensor will be instructed to flip the image
vertically.");
>
> static bool override_serial;
> module_param(override_serial, bool, 0444);
> MODULE_PARM_DESC(override_serial,
> - "The camera driver will normally refuse to load if "
> - "the XO 1.5 serial port is enabled. Set this option "
> - "to force-enable the camera.");
> + "The camera driver will normally refuse to load if the XO 1.5
serial port
> is enabled. Set this option to force-enable the camera.");
>
> /*
> * The structure describing our camera.
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 79+ messages in thread* Re: [PATCH 54/57] [media] platform: don't break long lines
2016-10-17 13:45 ` Laurent Pinchart
@ 2016-10-17 19:39 ` Andrey Utkin
2016-10-17 18:44 ` Laurent Pinchart
0 siblings, 1 reply; 79+ messages in thread
From: Andrey Utkin @ 2016-10-17 19:39 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Hans Verkuil,
Geunyoung Kim, Inki Dae, Junghak Sung, Julia Lawall,
Robert Jarzmik, Guennadi Liakhovetski, Wei Yongjun,
Arnd Bergmann
On Mon, Oct 17, 2016 at 04:45:06PM +0300, Laurent Pinchart wrote:
> If you really want to perform such a change, let's not make lines
> unnecessarily long either. You should add a line break after the first and
> second argument:
>
> dprintk(ctx->dev,
> "%s data will not fit into plane(%lu < %lu)\n",
> __func__, vb2_plane_size(vb, 0),
> (long)q_data->sizeimage);
>
> And everything will fit in 80 columns.
Same happens in other places, e.g. the hunk for
cx8802_unregister_driver() in another patch in this series, and not just
one time (looked just patches where I was a direct recipient).
There is a printing function call with previously split string literal,
followed by several arguments. This unnecessarily long function call is
now a single line.
Maybe the remaining manual work may be outsourced to seekers of janitor
tasks?
^ permalink raw reply [flat|nested] 79+ messages in thread
* Re: [PATCH 54/57] [media] platform: don't break long lines
2016-10-17 19:39 ` Andrey Utkin
@ 2016-10-17 18:44 ` Laurent Pinchart
2016-10-17 19:50 ` Andrey Utkin
0 siblings, 1 reply; 79+ messages in thread
From: Laurent Pinchart @ 2016-10-17 18:44 UTC (permalink / raw)
To: Andrey Utkin
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Hans Verkuil,
Geunyoung Kim, Inki Dae, Junghak Sung, Julia Lawall,
Robert Jarzmik, Guennadi Liakhovetski, Wei Yongjun,
Arnd Bergmann
Hi Andrey,
On Monday 17 Oct 2016 20:39:45 Andrey Utkin wrote:
> On Mon, Oct 17, 2016 at 04:45:06PM +0300, Laurent Pinchart wrote:
> > If you really want to perform such a change, let's not make lines
> > unnecessarily long either. You should add a line break after the first and
> >
> > second argument:
> > dprintk(ctx->dev,
> >
> > "%s data will not fit into plane(%lu < %lu)\n",
> > __func__, vb2_plane_size(vb, 0),
> > (long)q_data->sizeimage);
> >
> > And everything will fit in 80 columns.
>
> Same happens in other places, e.g. the hunk for
> cx8802_unregister_driver() in another patch in this series, and not just
> one time (looked just patches where I was a direct recipient).
> There is a printing function call with previously split string literal,
> followed by several arguments. This unnecessarily long function call is
> now a single line.
> Maybe the remaining manual work may be outsourced to seekers of janitor
> tasks?
I'm fine with that, but we should rework the original patches, not merge fixes
on top of them.
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 79+ messages in thread
* Re: [PATCH 54/57] [media] platform: don't break long lines
2016-10-17 18:44 ` Laurent Pinchart
@ 2016-10-17 19:50 ` Andrey Utkin
0 siblings, 0 replies; 79+ messages in thread
From: Andrey Utkin @ 2016-10-17 19:50 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Hans Verkuil,
Geunyoung Kim, Inki Dae, Junghak Sung, Julia Lawall,
Robert Jarzmik, Guennadi Liakhovetski, Wei Yongjun,
Arnd Bergmann
On Mon, Oct 17, 2016 at 09:44:19PM +0300, Laurent Pinchart wrote:
> Hi Andrey,
>
> On Monday 17 Oct 2016 20:39:45 Andrey Utkin wrote:
> > Maybe the remaining manual work may be outsourced to seekers of janitor
> > tasks?
>
> I'm fine with that, but we should rework the original patches, not merge fixes
> on top of them.
I haven't meant that :) What I had in mind was a singular patchset with
combination of automated and manual work, just as you say, I just didn't
state it clearly.
^ permalink raw reply [flat|nested] 79+ messages in thread
* [PATCH 55/57] [media] radio: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (53 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 54/57] [media] platform: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 56/57] [media] rc: " Mauro Carvalho Chehab
` (2 subsequent siblings)
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Hans Verkuil, Mauro Carvalho Chehab
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/radio/radio-gemtek.c | 8 ++------
drivers/media/radio/radio-wl1273.c | 3 +--
2 files changed, 3 insertions(+), 8 deletions(-)
diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c
index cff1eb144a5c..ca051ccbc3e4 100644
--- a/drivers/media/radio/radio-gemtek.c
+++ b/drivers/media/radio/radio-gemtek.c
@@ -67,14 +67,10 @@ module_param(probe, bool, 0444);
MODULE_PARM_DESC(probe, "Enable automatic device probing.");
module_param(hardmute, bool, 0644);
-MODULE_PARM_DESC(hardmute, "Enable 'hard muting' by shutting down PLL, may "
- "reduce static noise.");
+MODULE_PARM_DESC(hardmute, "Enable 'hard muting' by shutting down PLL, may reduce static noise.");
module_param_array(io, int, NULL, 0444);
-MODULE_PARM_DESC(io, "Force I/O ports for the GemTek Radio card if automatic "
- "probing is disabled or fails. The most common I/O ports are: 0x20c "
- "0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to "
- "work for the combined sound/radiocard).");
+MODULE_PARM_DESC(io, "Force I/O ports for the GemTek Radio card if automatic probing is disabled or fails. The most common I/O ports are: 0x20c 0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to work for the combined sound/radiocard).");
module_param_array(radio_nr, int, NULL, 0444);
MODULE_PARM_DESC(radio_nr, "Radio device numbers");
diff --git a/drivers/media/radio/radio-wl1273.c b/drivers/media/radio/radio-wl1273.c
index a93f681aa9d6..9ce4b12299b4 100644
--- a/drivers/media/radio/radio-wl1273.c
+++ b/drivers/media/radio/radio-wl1273.c
@@ -2068,8 +2068,7 @@ static int wl1273_fm_radio_probe(struct platform_device *pdev)
goto err_request_irq;
}
} else {
- dev_err(radio->dev, WL1273_FM_DRIVER_NAME ": Core WL1273 IRQ"
- " not configured");
+ dev_err(radio->dev, WL1273_FM_DRIVER_NAME ": Core WL1273 IRQ not configured");
r = -EINVAL;
goto pdata_err;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 56/57] [media] rc: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (54 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 55/57] [media] radio: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-14 20:20 ` [PATCH 57/57] [media] tuners: " Mauro Carvalho Chehab
2016-10-15 13:46 ` [PATCH 00/57] don't break long lines on strings Stefan Richter
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Mauro Carvalho Chehab, Maxim Levitsky,
David Härdeman, Rasmus Villemoes, Wolfram Sang,
Greg Kroah-Hartman, Hans Verkuil, Olli Salonen, Sean Young,
Heiner Kallweit, Max Kellermann, Kamil Debski, Ole Ernst,
Colin Ian King, Tina Ruchandani, Arnd Bergmann
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/rc/ati_remote.c | 3 +--
drivers/media/rc/ene_ir.c | 3 +--
drivers/media/rc/imon.c | 43 ++++++++++++++----------------------------
drivers/media/rc/ite-cir.c | 9 +++------
drivers/media/rc/mceusb.c | 4 +---
drivers/media/rc/rc-main.c | 3 +--
drivers/media/rc/redrat3.c | 18 ++++++------------
drivers/media/rc/streamzap.c | 9 +++------
drivers/media/rc/winbond-cir.c | 9 +++------
9 files changed, 33 insertions(+), 68 deletions(-)
diff --git a/drivers/media/rc/ati_remote.c b/drivers/media/rc/ati_remote.c
index 9f5b59706741..0884b7dc0e71 100644
--- a/drivers/media/rc/ati_remote.c
+++ b/drivers/media/rc/ati_remote.c
@@ -527,8 +527,7 @@ static void ati_remote_input_report(struct urb *urb)
remote_num = (data[3] >> 4) & 0x0f;
if (channel_mask & (1 << (remote_num + 1))) {
dbginfo(&ati_remote->interface->dev,
- "Masked input from channel 0x%02x: data %02x, "
- "mask= 0x%02lx\n",
+ "Masked input from channel 0x%02x: data %02x, mask= 0x%02lx\n",
remote_num, data[2], channel_mask);
return;
}
diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c
index d1c61cd035f6..bd5512e64aea 100644
--- a/drivers/media/rc/ene_ir.c
+++ b/drivers/media/rc/ene_ir.c
@@ -1210,8 +1210,7 @@ MODULE_PARM_DESC(txsim,
MODULE_DEVICE_TABLE(pnp, ene_ids);
MODULE_DESCRIPTION
- ("Infrared input driver for KB3926B/C/D/E/F "
- "(aka ENE0100/ENE0200/ENE0201/ENE0202) CIR port");
+ ("Infrared input driver for KB3926B/C/D/E/F (aka ENE0100/ENE0200/ENE0201/ENE0202) CIR port");
MODULE_AUTHOR("Maxim Levitsky");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index d62b1f38292c..bff834f5e018 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -441,13 +441,11 @@ MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes (default: no)");
/* lcd, vfd, vga or none? should be auto-detected, but can be overridden... */
static int display_type;
module_param(display_type, int, S_IRUGO);
-MODULE_PARM_DESC(display_type, "Type of attached display. 0=autodetect, "
- "1=vfd, 2=lcd, 3=vga, 4=none (default: autodetect)");
+MODULE_PARM_DESC(display_type, "Type of attached display. 0=autodetect, 1=vfd, 2=lcd, 3=vga, 4=none (default: autodetect)");
static int pad_stabilize = 1;
module_param(pad_stabilize, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(pad_stabilize, "Apply stabilization algorithm to iMON PAD "
- "presses in arrow key mode. 0=disable, 1=enable (default).");
+MODULE_PARM_DESC(pad_stabilize, "Apply stabilization algorithm to iMON PAD presses in arrow key mode. 0=disable, 1=enable (default).");
/*
* In certain use cases, mouse mode isn't really helpful, and could actually
@@ -455,14 +453,12 @@ MODULE_PARM_DESC(pad_stabilize, "Apply stabilization algorithm to iMON PAD "
*/
static bool nomouse;
module_param(nomouse, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(nomouse, "Disable mouse input device mode when IR device is "
- "open. 0=don't disable, 1=disable. (default: don't disable)");
+MODULE_PARM_DESC(nomouse, "Disable mouse input device mode when IR device is open. 0=don't disable, 1=disable. (default: don't disable)");
/* threshold at which a pad push registers as an arrow key in kbd mode */
static int pad_thresh;
module_param(pad_thresh, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(pad_thresh, "Threshold at which a pad push registers as an "
- "arrow key in kbd mode (default: 28)");
+MODULE_PARM_DESC(pad_thresh, "Threshold at which a pad push registers as an arrow key in kbd mode (default: 28)");
static void free_imon_context(struct imon_context *ictx)
@@ -785,9 +781,7 @@ static ssize_t show_associate_remote(struct device *d,
else
strcpy(buf, "closed\n");
- dev_info(d, "Visit http://www.lirc.org/html/imon-24g.html for "
- "instructions on how to associate your iMON 2.4G DT/LT "
- "remote\n");
+ dev_info(d, "Visit http://www.lirc.org/html/imon-24g.html for instructions on how to associate your iMON 2.4G DT/LT remote\n");
mutex_unlock(&ictx->lock);
return strlen(buf);
}
@@ -1115,8 +1109,7 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 *rc_type)
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 };
if (*rc_type && !(*rc_type & rc->allowed_protocols))
- dev_warn(dev, "Looks like you're trying to use an IR protocol "
- "this device does not support\n");
+ dev_warn(dev, "Looks like you're trying to use an IR protocol this device does not support\n");
if (*rc_type & RC_BIT_RC6_MCE) {
dev_dbg(dev, "Configuring IR receiver for MCE protocol\n");
@@ -1129,8 +1122,7 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 *rc_type)
/* ir_proto_packet[0] = 0x00; // already the default */
*rc_type = RC_BIT_OTHER;
} else {
- dev_warn(dev, "Unsupported IR protocol specified, overriding "
- "to iMON IR protocol\n");
+ dev_warn(dev, "Unsupported IR protocol specified, overriding to iMON IR protocol\n");
if (!pad_stabilize)
dev_dbg(dev, "PAD stabilize functionality disabled\n");
/* ir_proto_packet[0] = 0x00; // already the default */
@@ -1719,8 +1711,7 @@ static void imon_incoming_packet(struct imon_context *ictx,
not_input_data:
if (len != 8) {
- dev_warn(dev, "imon %s: invalid incoming packet "
- "size (len = %d, intf%d)\n", __func__, len, intf);
+ dev_warn(dev, "imon %s: invalid incoming packet size (len = %d, intf%d)\n", __func__, len, intf);
return;
}
@@ -1876,8 +1867,7 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
allowed_protos = RC_BIT_RC6_MCE;
break;
default:
- dev_info(ictx->dev, "Unknown 0xffdc device, "
- "defaulting to VFD and iMON IR");
+ dev_info(ictx->dev, "Unknown 0xffdc device, defaulting to VFD and iMON IR");
detected_display_type = IMON_DISPLAY_TYPE_VFD;
/* We don't know which one it is, allow user to set the
* RC6 one from userspace if OTHER wasn't correct. */
@@ -1934,8 +1924,7 @@ static void imon_set_display_type(struct imon_context *ictx)
ictx->display_supported = false;
else
ictx->display_supported = true;
- dev_info(ictx->dev, "%s: overriding display type to %d via "
- "modparam\n", __func__, display_type);
+ dev_info(ictx->dev, "%s: overriding display type to %d via modparam\n", __func__, display_type);
}
ictx->display_type = configured_display_type;
@@ -2156,8 +2145,7 @@ static bool imon_find_endpoints(struct imon_context *ictx,
if (!display_ep_found) {
tx_control = true;
display_ep_found = true;
- dev_dbg(ictx->dev, "%s: device uses control endpoint, not "
- "interface OUT endpoint\n", __func__);
+ dev_dbg(ictx->dev, "%s: device uses control endpoint, not interface OUT endpoint\n", __func__);
}
/*
@@ -2366,8 +2354,7 @@ static void imon_init_display(struct imon_context *ictx,
/* set up sysfs entry for built-in clock */
ret = sysfs_create_group(&intf->dev.kobj, &imon_display_attr_group);
if (ret)
- dev_err(ictx->dev, "Could not create display sysfs "
- "entries(%d)", ret);
+ dev_err(ictx->dev, "Could not create display sysfs entries(%d)", ret);
if (ictx->display_type == IMON_DISPLAY_TYPE_LCD)
ret = usb_register_dev(intf, &imon_lcd_class);
@@ -2375,8 +2362,7 @@ static void imon_init_display(struct imon_context *ictx,
ret = usb_register_dev(intf, &imon_vfd_class);
if (ret)
/* Not a fatal error, so ignore */
- dev_info(ictx->dev, "could not get a minor number for "
- "display\n");
+ dev_info(ictx->dev, "could not get a minor number for display\n");
}
@@ -2456,8 +2442,7 @@ static int imon_probe(struct usb_interface *interface,
mutex_unlock(&ictx->lock);
}
- dev_info(dev, "iMON device (%04x:%04x, intf%d) on "
- "usb<%d:%d> initialized\n", vendor, product, ifnum,
+ dev_info(dev, "iMON device (%04x:%04x, intf%d) on usb<%d:%d> initialized\n", vendor, product, ifnum,
usbdev->bus->busnum, usbdev->devnum);
mutex_unlock(&driver_lock);
diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c
index 0f301903aa6f..c5e8e3885766 100644
--- a/drivers/media/rc/ite-cir.c
+++ b/drivers/media/rc/ite-cir.c
@@ -55,14 +55,12 @@ MODULE_PARM_DESC(debug, "Enable debugging output");
/* low limit for RX carrier freq, Hz, 0 for no RX demodulation */
static int rx_low_carrier_freq;
module_param(rx_low_carrier_freq, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(rx_low_carrier_freq, "Override low RX carrier frequency, Hz, "
- "0 for no RX demodulation");
+MODULE_PARM_DESC(rx_low_carrier_freq, "Override low RX carrier frequency, Hz, 0 for no RX demodulation");
/* high limit for RX carrier freq, Hz, 0 for no RX demodulation */
static int rx_high_carrier_freq;
module_param(rx_high_carrier_freq, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(rx_high_carrier_freq, "Override high RX carrier frequency, "
- "Hz, 0 for no RX demodulation");
+MODULE_PARM_DESC(rx_high_carrier_freq, "Override high RX carrier frequency, Hz, 0 for no RX demodulation");
/* override tx carrier frequency */
static int tx_carrier_freq;
@@ -1484,8 +1482,7 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id
if (model_number >= 0 && model_number < ARRAY_SIZE(ite_dev_descs)) {
model_no = model_number;
- ite_pr(KERN_NOTICE, "The model has been fixed by a module "
- "parameter.");
+ ite_pr(KERN_NOTICE, "The model has been fixed by a module parameter.");
}
ite_pr(KERN_NOTICE, "Using model: %s\n", ite_dev_descs[model_no].model);
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 4f8c7effdcee..f813b77c595d 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -604,9 +604,7 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf,
break;
case MCE_RSP_EQWAKEVERSION:
if (!out)
- dev_dbg(dev, "Wake version, proto: 0x%02x, "
- "payload: 0x%02x, address: 0x%02x, "
- "version: 0x%02x",
+ dev_dbg(dev, "Wake version, proto: 0x%02x, payload: 0x%02x, address: 0x%02x, version: 0x%02x",
data1, data2, data3, data4);
break;
case MCE_RSP_GETPORTSTATUS:
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index d9c1f2ff7119..b241e5f569ef 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -660,8 +660,7 @@ static void ir_do_keydown(struct rc_dev *dev, enum rc_type protocol,
dev->last_toggle = toggle;
dev->last_keycode = keycode;
- IR_dprintk(1, "%s: key down event, "
- "key 0x%04x, protocol 0x%04x, scancode 0x%08x\n",
+ IR_dprintk(1, "%s: key down event, key 0x%04x, protocol 0x%04x, scancode 0x%08x\n",
dev->input_name, keycode, protocol, scancode);
input_report_key(dev->input_dev, keycode, 1);
diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c
index 05ba47bc0b61..3b0ed1c3f2d8 100644
--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -265,8 +265,7 @@ static void redrat3_dump_fw_error(struct redrat3_dev *rr3, int code)
/* Codes 0x20 through 0x2f are IR Firmware Errors */
case 0x20:
- pr_cont("Initial signal pulse not long enough "
- "to measure carrier frequency\n");
+ pr_cont("Initial signal pulse not long enough to measure carrier frequency\n");
break;
case 0x21:
pr_cont("Not enough length values allocated for signal\n");
@@ -278,18 +277,15 @@ static void redrat3_dump_fw_error(struct redrat3_dev *rr3, int code)
pr_cont("Too many signal repeats\n");
break;
case 0x28:
- pr_cont("Insufficient memory available for IR signal "
- "data memory allocation\n");
+ pr_cont("Insufficient memory available for IR signal data memory allocation\n");
break;
case 0x29:
- pr_cont("Insufficient memory available "
- "for IrDa signal data memory allocation\n");
+ pr_cont("Insufficient memory available for IrDa signal data memory allocation\n");
break;
/* Codes 0x30 through 0x3f are USB Firmware Errors */
case 0x30:
- pr_cont("Insufficient memory available for bulk "
- "transfer structure\n");
+ pr_cont("Insufficient memory available for bulk transfer structure\n");
break;
/*
@@ -301,8 +297,7 @@ static void redrat3_dump_fw_error(struct redrat3_dev *rr3, int code)
pr_cont("Signal capture has been terminated\n");
break;
case 0x41:
- pr_cont("Attempt to set/get and unknown signal I/O "
- "algorithm parameter\n");
+ pr_cont("Attempt to set/get and unknown signal I/O algorithm parameter\n");
break;
case 0x42:
pr_cont("Signal capture already started\n");
@@ -917,8 +912,7 @@ static struct rc_dev *redrat3_init_rc_dev(struct redrat3_dev *rr3)
goto out;
}
- snprintf(rr3->name, sizeof(rr3->name), "RedRat3%s "
- "Infrared Remote Transceiver (%04x:%04x)",
+ snprintf(rr3->name, sizeof(rr3->name), "RedRat3%s Infrared Remote Transceiver (%04x:%04x)",
prod == USB_RR3IIUSB_PRODUCT_ID ? "-II" : "",
le16_to_cpu(rr3->udev->descriptor.idVendor), prod);
diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c
index 4004260a7c69..d61a620b6fd5 100644
--- a/drivers/media/rc/streamzap.c
+++ b/drivers/media/rc/streamzap.c
@@ -297,8 +297,7 @@ static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz)
goto out;
}
- snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared "
- "Receiver (%04x:%04x)",
+ snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared Receiver (%04x:%04x)",
le16_to_cpu(sz->usbdev->descriptor.idVendor),
le16_to_cpu(sz->usbdev->descriptor.idProduct));
usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
@@ -364,15 +363,13 @@ static int streamzap_probe(struct usb_interface *intf,
sz->endpoint = &(iface_host->endpoint[0].desc);
if (!usb_endpoint_dir_in(sz->endpoint)) {
- dev_err(&intf->dev, "%s: endpoint doesn't match input device "
- "02%02x\n", __func__, sz->endpoint->bEndpointAddress);
+ dev_err(&intf->dev, "%s: endpoint doesn't match input device 02%02x\n", __func__, sz->endpoint->bEndpointAddress);
retval = -ENODEV;
goto free_sz;
}
if (!usb_endpoint_xfer_int(sz->endpoint)) {
- dev_err(&intf->dev, "%s: endpoint attributes don't match xfer "
- "02%02x\n", __func__, sz->endpoint->bmAttributes);
+ dev_err(&intf->dev, "%s: endpoint attributes don't match xfer 02%02x\n", __func__, sz->endpoint->bmAttributes);
retval = -ENODEV;
goto free_sz;
}
diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c
index 95ae60e659a1..cdcd6e38b295 100644
--- a/drivers/media/rc/winbond-cir.c
+++ b/drivers/media/rc/winbond-cir.c
@@ -227,8 +227,7 @@ struct wbcir_data {
static enum wbcir_protocol protocol = IR_PROTOCOL_RC6;
module_param(protocol, uint, 0444);
-MODULE_PARM_DESC(protocol, "IR protocol to use for the power-on command "
- "(0 = RC5, 1 = NEC, 2 = RC6A, default)");
+MODULE_PARM_DESC(protocol, "IR protocol to use for the power-on command (0 = RC5, 1 = NEC, 2 = RC6A, default)");
static bool invert; /* default = 0 */
module_param(invert, bool, 0444);
@@ -244,8 +243,7 @@ MODULE_PARM_DESC(wake_sc, "Scancode of the power-on IR command");
static unsigned int wake_rc6mode = 6;
module_param(wake_rc6mode, uint, 0644);
-MODULE_PARM_DESC(wake_rc6mode, "RC6 mode for the power-on command "
- "(0 = 0, 6 = 6A, default)");
+MODULE_PARM_DESC(wake_rc6mode, "RC6 mode for the power-on command (0 = 0, 6 = 6A, default)");
@@ -1050,8 +1048,7 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
goto exit_free_data;
}
- dev_dbg(&device->dev, "Found device "
- "(w: 0x%lX, e: 0x%lX, s: 0x%lX, i: %u)\n",
+ dev_dbg(&device->dev, "Found device (w: 0x%lX, e: 0x%lX, s: 0x%lX, i: %u)\n",
data->wbase, data->ebase, data->sbase, data->irq);
data->led.name = "cir::activity";
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH 57/57] [media] tuners: don't break long lines
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (55 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 56/57] [media] rc: " Mauro Carvalho Chehab
@ 2016-10-14 20:20 ` Mauro Carvalho Chehab
2016-10-15 13:46 ` [PATCH 00/57] don't break long lines on strings Stefan Richter
57 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-14 20:20 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Linux Media Mailing List,
Mauro Carvalho Chehab, Michael Buesch, Mauro Carvalho Chehab,
Michael Krufky, Hans Verkuil, Julia Lawall
Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/tuners/fc0011.c | 7 ++----
drivers/media/tuners/mc44s803.c | 3 +--
drivers/media/tuners/tda18271-common.c | 3 +--
drivers/media/tuners/tda18271-fe.c | 3 +--
drivers/media/tuners/tda18271-maps.c | 6 +-----
drivers/media/tuners/tda8290.c | 3 +--
drivers/media/tuners/tea5761.c | 6 ++----
drivers/media/tuners/tuner-simple.c | 39 ++++++++++++----------------------
drivers/media/tuners/xc4000.c | 25 +++++++---------------
9 files changed, 30 insertions(+), 65 deletions(-)
diff --git a/drivers/media/tuners/fc0011.c b/drivers/media/tuners/fc0011.c
index 3932aa81e18c..2dda8d993c14 100644
--- a/drivers/media/tuners/fc0011.c
+++ b/drivers/media/tuners/fc0011.c
@@ -262,8 +262,7 @@ static int fc0011_set_params(struct dvb_frontend *fe)
regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_BW7M;
break;
default:
- dev_warn(&priv->i2c->dev, "Unsupported bandwidth %u kHz. "
- "Using 6000 kHz.\n",
+ dev_warn(&priv->i2c->dev, "Unsupported bandwidth %u kHz. Using 6000 kHz.\n",
bandwidth);
bandwidth = 6000;
/* fallthrough */
@@ -435,9 +434,7 @@ static int fc0011_set_params(struct dvb_frontend *fe)
if (err)
return err;
- dev_dbg(&priv->i2c->dev, "Tuned to "
- "fa=%02X fp=%02X xin=%02X%02X vco=%02X vcosel=%02X "
- "vcocal=%02X(%u) bw=%u\n",
+ dev_dbg(&priv->i2c->dev, "Tuned to fa=%02X fp=%02X xin=%02X%02X vco=%02X vcosel=%02X vcocal=%02X(%u) bw=%u\n",
(unsigned int)regs[FC11_REG_FA],
(unsigned int)regs[FC11_REG_FP],
(unsigned int)regs[FC11_REG_XINHI],
diff --git a/drivers/media/tuners/mc44s803.c b/drivers/media/tuners/mc44s803.c
index f1b764074661..cc0d5ae11eb9 100644
--- a/drivers/media/tuners/mc44s803.c
+++ b/drivers/media/tuners/mc44s803.c
@@ -349,8 +349,7 @@ struct dvb_frontend *mc44s803_attach(struct dvb_frontend *fe,
id = MC44S803_REG_MS(reg, MC44S803_ID);
if (id != 0x14) {
- mc_printk(KERN_ERR, "unsupported ID "
- "(%x should be 0x14)\n", id);
+ mc_printk(KERN_ERR, "unsupported ID (%x should be 0x14)\n", id);
goto error;
}
diff --git a/drivers/media/tuners/tda18271-common.c b/drivers/media/tuners/tda18271-common.c
index a26bb33102b8..25c0ec42a1c6 100644
--- a/drivers/media/tuners/tda18271-common.c
+++ b/drivers/media/tuners/tda18271-common.c
@@ -251,8 +251,7 @@ static int __tda18271_write_regs(struct dvb_frontend *fe, int idx, int len,
}
if (ret != 1)
- tda_err("ERROR: idx = 0x%x, len = %d, "
- "i2c_transfer returned: %d\n", idx, max, ret);
+ tda_err("ERROR: idx = 0x%x, len = %d, i2c_transfer returned: %d\n", idx, max, ret);
return (ret == 1 ? 0 : ret);
}
diff --git a/drivers/media/tuners/tda18271-fe.c b/drivers/media/tuners/tda18271-fe.c
index 2d50e8b1dce1..a4730610c0c6 100644
--- a/drivers/media/tuners/tda18271-fe.c
+++ b/drivers/media/tuners/tda18271-fe.c
@@ -26,8 +26,7 @@
int tda18271_debug;
module_param_named(debug, tda18271_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debug level "
- "(info=1, map=2, reg=4, adv=8, cal=16 (or-able))");
+MODULE_PARM_DESC(debug, "set debug level (info=1, map=2, reg=4, adv=8, cal=16 (or-able))");
static int tda18271_cal_on_startup = -1;
module_param_named(cal, tda18271_cal_on_startup, int, 0644);
diff --git a/drivers/media/tuners/tda18271-maps.c b/drivers/media/tuners/tda18271-maps.c
index 1e89dd93c4bb..7d114677b4ca 100644
--- a/drivers/media/tuners/tda18271-maps.c
+++ b/drivers/media/tuners/tda18271-maps.c
@@ -1024,11 +1024,7 @@ int tda18271_lookup_rf_band(struct dvb_frontend *fe, u32 *freq, u8 *rf_band)
while ((map[i].rfmax * 1000) < *freq) {
if (tda18271_debug & DBG_ADV)
- tda_map("(%d) rfmax = %d < freq = %d, "
- "rf1_def = %d, rf2_def = %d, rf3_def = %d, "
- "rf1 = %d, rf2 = %d, rf3 = %d, "
- "rf_a1 = %d, rf_a2 = %d, "
- "rf_b1 = %d, rf_b2 = %d\n",
+ tda_map("(%d) rfmax = %d < freq = %d, rf1_def = %d, rf2_def = %d, rf3_def = %d, rf1 = %d, rf2 = %d, rf3 = %d, rf_a1 = %d, rf_a2 = %d, rf_b1 = %d, rf_b2 = %d\n",
i, map[i].rfmax * 1000, *freq,
map[i].rf1_def, map[i].rf2_def, map[i].rf3_def,
map[i].rf1, map[i].rf2, map[i].rf3,
diff --git a/drivers/media/tuners/tda8290.c b/drivers/media/tuners/tda8290.c
index 998e82bba9c0..1634a9e95602 100644
--- a/drivers/media/tuners/tda8290.c
+++ b/drivers/media/tuners/tda8290.c
@@ -617,8 +617,7 @@ static int tda829x_find_tuner(struct dvb_frontend *fe)
if (tuner_addrs == 0) {
tuner_addrs = 0x60;
- tuner_info("could not clearly identify tuner address, "
- "defaulting to %x\n", tuner_addrs);
+ tuner_info("could not clearly identify tuner address, defaulting to %x\n", tuner_addrs);
} else {
tuner_addrs = tuner_addrs & 0xff;
tuner_info("setting tuner address to %x\n", tuner_addrs);
diff --git a/drivers/media/tuners/tea5761.c b/drivers/media/tuners/tea5761.c
index 36b0b1e1d05b..12347aa95de3 100644
--- a/drivers/media/tuners/tea5761.c
+++ b/drivers/media/tuners/tea5761.c
@@ -274,13 +274,11 @@ int tea5761_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr)
}
if ((buffer[13] != 0x2b) || (buffer[14] != 0x57) || (buffer[15] != 0x061)) {
- printk(KERN_WARNING "Manufacturer ID= 0x%02x, Chip ID = %02x%02x."
- " It is not a TEA5761\n",
+ printk(KERN_WARNING "Manufacturer ID= 0x%02x, Chip ID = %02x%02x. It is not a TEA5761\n",
buffer[13], buffer[14], buffer[15]);
return -EINVAL;
}
- printk(KERN_WARNING "tea5761: TEA%02x%02x detected. "
- "Manufacturer ID= 0x%02x\n",
+ printk(KERN_WARNING "tea5761: TEA%02x%02x detected. Manufacturer ID= 0x%02x\n",
buffer[14], buffer[15], buffer[13]);
return 0;
diff --git a/drivers/media/tuners/tuner-simple.c b/drivers/media/tuners/tuner-simple.c
index 9ba9582e7765..60586593dd98 100644
--- a/drivers/media/tuners/tuner-simple.c
+++ b/drivers/media/tuners/tuner-simple.c
@@ -275,8 +275,7 @@ static int simple_config_lookup(struct dvb_frontend *fe,
*config = t_params->ranges[i].config;
*cb = t_params->ranges[i].cb;
- tuner_dbg("freq = %d.%02d (%d), range = %d, "
- "config = 0x%02x, cb = 0x%02x\n",
+ tuner_dbg("freq = %d.%02d (%d), range = %d, config = 0x%02x, cb = 0x%02x\n",
*frequency / 16, *frequency % 16 * 100 / 16, *frequency,
i, *config, *cb);
@@ -404,12 +403,10 @@ static int simple_std_setup(struct dvb_frontend *fe,
i2c.addr = 0x0a;
rc = tuner_i2c_xfer_send(&i2c, &buffer[0], 2);
if (2 != rc)
- tuner_warn("i2c i/o error: rc == %d "
- "(should be 2)\n", rc);
+ tuner_warn("i2c i/o error: rc == %d (should be 2)\n", rc);
rc = tuner_i2c_xfer_send(&i2c, &buffer[2], 2);
if (2 != rc)
- tuner_warn("i2c i/o error: rc == %d "
- "(should be 2)\n", rc);
+ tuner_warn("i2c i/o error: rc == %d (should be 2)\n", rc);
break;
}
}
@@ -463,8 +460,7 @@ static int simple_post_tune(struct dvb_frontend *fe, u8 *buffer,
rc = tuner_i2c_xfer_recv(&priv->i2c_props,
&status_byte, 1);
if (1 != rc) {
- tuner_warn("i2c i/o read error: rc == %d "
- "(should be 1)\n", rc);
+ tuner_warn("i2c i/o read error: rc == %d (should be 1)\n", rc);
break;
}
if (status_byte & TUNER_PLL_LOCKED)
@@ -483,8 +479,7 @@ static int simple_post_tune(struct dvb_frontend *fe, u8 *buffer,
rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4);
if (4 != rc)
- tuner_warn("i2c i/o error: rc == %d "
- "(should be 4)\n", rc);
+ tuner_warn("i2c i/o error: rc == %d (should be 4)\n", rc);
break;
}
}
@@ -499,8 +494,7 @@ static int simple_radio_bandswitch(struct dvb_frontend *fe, u8 *buffer)
switch (priv->type) {
case TUNER_TENA_9533_DI:
case TUNER_YMEC_TVF_5533MF:
- tuner_dbg("This tuner doesn't have FM. "
- "Most cards have a TEA5767 for FM\n");
+ tuner_dbg("This tuner doesn't have FM. Most cards have a TEA5767 for FM\n");
return 0;
case TUNER_PHILIPS_FM1216ME_MK3:
case TUNER_PHILIPS_FM1236_MK3:
@@ -586,8 +580,7 @@ static int simple_set_tv_freq(struct dvb_frontend *fe,
div = params->frequency + IFPCoff + offset;
- tuner_dbg("Freq= %d.%02d MHz, V_IF=%d.%02d MHz, "
- "Offset=%d.%02d MHz, div=%0d\n",
+ tuner_dbg("Freq= %d.%02d MHz, V_IF=%d.%02d MHz, Offset=%d.%02d MHz, div=%0d\n",
params->frequency / 16, params->frequency % 16 * 100 / 16,
IFPCoff / 16, IFPCoff % 16 * 100 / 16,
offset / 16, offset % 16 * 100 / 16, div);
@@ -858,8 +851,7 @@ static u32 simple_dvb_configure(struct dvb_frontend *fe, u8 *buf,
if (!tun->stepsize) {
/* tuner-core was loaded before the digital tuner was
* configured and somehow picked the wrong tuner type */
- tuner_err("attempt to treat tuner %d (%s) as digital tuner "
- "without stepsize defined.\n",
+ tuner_err("attempt to treat tuner %d (%s) as digital tuner without stepsize defined.\n",
priv->type, priv->tun->name);
return 0; /* failure */
}
@@ -1077,8 +1069,7 @@ struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe,
fe->ops.i2c_gate_ctrl(fe, 1);
if (1 != i2c_transfer(i2c_adap, &msg, 1))
- printk(KERN_WARNING "tuner-simple %d-%04x: "
- "unable to probe %s, proceeding anyway.",
+ printk(KERN_WARNING "tuner-simple %d-%04x: unable to probe %s, proceeding anyway.",
i2c_adapter_id(i2c_adap), i2c_addr,
tuners[type].name);
@@ -1123,18 +1114,14 @@ struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe,
if ((debug) || ((atv_input[priv->nr] > 0) ||
(dtv_input[priv->nr] > 0))) {
if (0 == atv_input[priv->nr])
- tuner_info("tuner %d atv rf input will be "
- "autoselected\n", priv->nr);
+ tuner_info("tuner %d atv rf input will be autoselected\n", priv->nr);
else
- tuner_info("tuner %d atv rf input will be "
- "set to input %d (insmod option)\n",
+ tuner_info("tuner %d atv rf input will be set to input %d (insmod option)\n",
priv->nr, atv_input[priv->nr]);
if (0 == dtv_input[priv->nr])
- tuner_info("tuner %d dtv rf input will be "
- "autoselected\n", priv->nr);
+ tuner_info("tuner %d dtv rf input will be autoselected\n", priv->nr);
else
- tuner_info("tuner %d dtv rf input will be "
- "set to input %d (insmod option)\n",
+ tuner_info("tuner %d dtv rf input will be set to input %d (insmod option)\n",
priv->nr, dtv_input[priv->nr]);
}
diff --git a/drivers/media/tuners/xc4000.c b/drivers/media/tuners/xc4000.c
index d95c7e082ccf..ac98dea985c8 100644
--- a/drivers/media/tuners/xc4000.c
+++ b/drivers/media/tuners/xc4000.c
@@ -43,14 +43,11 @@ MODULE_PARM_DESC(debug, "Debugging level (0 to 2, default: 0 (off)).");
static int no_poweroff;
module_param(no_poweroff, int, 0644);
-MODULE_PARM_DESC(no_poweroff, "Power management (1: disabled, 2: enabled, "
- "0 (default): use device-specific default mode).");
+MODULE_PARM_DESC(no_poweroff, "Power management (1: disabled, 2: enabled, 0 (default): use device-specific default mode).");
static int audio_std;
module_param(audio_std, int, 0644);
-MODULE_PARM_DESC(audio_std, "Audio standard. XC4000 audio decoder explicitly "
- "needs to know what audio standard is needed for some video standards "
- "with audio A2 or NICAM. The valid settings are a sum of:\n"
+MODULE_PARM_DESC(audio_std, "Audio standard. XC4000 audio decoder explicitly needs to know what audio standard is needed for some video standards with audio A2 or NICAM. The valid settings are a sum of:\n"
" 1: use NICAM/B or A2/B instead of NICAM/A or A2/A\n"
" 2: use A2 instead of NICAM or BTSC\n"
" 4: use SECAM/K3 instead of K1\n"
@@ -60,8 +57,7 @@ MODULE_PARM_DESC(audio_std, "Audio standard. XC4000 audio decoder explicitly "
static char firmware_name[30];
module_param_string(firmware_name, firmware_name, sizeof(firmware_name), 0);
-MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the "
- "default firmware name.");
+MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the default firmware name.");
static DEFINE_MUTEX(xc4000_list_mutex);
static LIST_HEAD(hybrid_tuner_instance_list);
@@ -290,8 +286,7 @@ static int xc4000_tuner_reset(struct dvb_frontend *fe)
return -EREMOTEIO;
}
} else {
- printk(KERN_ERR "xc4000: no tuner reset callback function, "
- "fatal\n");
+ printk(KERN_ERR "xc4000: no tuner reset callback function, fatal\n");
return -EINVAL;
}
return 0;
@@ -679,8 +674,7 @@ static int seek_firmware(struct dvb_frontend *fe, unsigned int type,
if (best_nr_diffs > 0U) {
printk(KERN_WARNING
- "Selecting best matching firmware (%u bits differ) for "
- "type=(%x), id %016llx:\n",
+ "Selecting best matching firmware (%u bits differ) for type=(%x), id %016llx:\n",
best_nr_diffs, type, (unsigned long long)*id);
i = best_i;
}
@@ -800,8 +794,7 @@ static int xc4000_fwupload(struct dvb_frontend *fe)
n++;
if (n >= n_array) {
- printk(KERN_ERR "More firmware images in file than "
- "were expected!\n");
+ printk(KERN_ERR "More firmware images in file than were expected!\n");
goto corrupt;
}
@@ -1055,8 +1048,7 @@ static int check_firmware(struct dvb_frontend *fe, unsigned int type,
goto fail;
}
- dprintk(1, "Device is Xceive %d version %d.%d, "
- "firmware version %d.%d\n",
+ dprintk(1, "Device is Xceive %d version %d.%d, firmware version %d.%d\n",
hwmodel, hw_major, hw_minor, fw_major, fw_minor);
/* Check firmware version against what we downloaded. */
@@ -1076,8 +1068,7 @@ static int check_firmware(struct dvb_frontend *fe, unsigned int type,
} else if (priv->hwmodel == 0 || priv->hwmodel != hwmodel ||
priv->hwvers != ((hw_major << 8) | hw_minor)) {
printk(KERN_WARNING
- "Read invalid device hardware information - tuner "
- "hung?\n");
+ "Read invalid device hardware information - tuner hung?\n");
goto fail;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 79+ messages in thread* Re: [PATCH 00/57] don't break long lines on strings
2016-10-14 20:19 [PATCH 00/57] don't break long lines on strings Mauro Carvalho Chehab
` (56 preceding siblings ...)
2016-10-14 20:20 ` [PATCH 57/57] [media] tuners: " Mauro Carvalho Chehab
@ 2016-10-15 13:46 ` Stefan Richter
2016-10-15 16:38 ` Mauro Carvalho Chehab
57 siblings, 1 reply; 79+ messages in thread
From: Stefan Richter @ 2016-10-15 13:46 UTC (permalink / raw)
To: Mauro Carvalho Chehab; +Cc: Linux Media Mailing List, Mauro Carvalho Chehab
On Oct 14 Mauro Carvalho Chehab wrote:
> There are lots of drivers on media that breaks long line strings in order to
> fit into 80 columns. This was an usual practice to make checkpatch happy.
This was practice even before checkpatch existed.
--
Stefan Richter
-======----- =-=- -====
http://arcgraph.de/sr/
^ permalink raw reply [flat|nested] 79+ messages in thread* Re: [PATCH 00/57] don't break long lines on strings
2016-10-15 13:46 ` [PATCH 00/57] don't break long lines on strings Stefan Richter
@ 2016-10-15 16:38 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 79+ messages in thread
From: Mauro Carvalho Chehab @ 2016-10-15 16:38 UTC (permalink / raw)
To: Stefan Richter; +Cc: Linux Media Mailing List, Mauro Carvalho Chehab
Em Sat, 15 Oct 2016 15:46:14 +0200
Stefan Richter <stefanr@s5r6.in-berlin.de> escreveu:
> On Oct 14 Mauro Carvalho Chehab wrote:
> > There are lots of drivers on media that breaks long line strings in order to
> > fit into 80 columns. This was an usual practice to make checkpatch happy.
>
> This was practice even before checkpatch existed.
True, but before checkpatch, we didn't care much to enforce breaking
long string lines, letting up to the patch author to decide. As far
as I remember, on media subsystem, only a handful drivers were actually
breaking long strings (or even respecting the 80 cols limit).
After checkpatch, we started to enforce such practice, until some discussions
on LKML arguing that breaking long strings actually make more harm than good,
as it makes harder to use grep to identify what part of the Kernel produced
a certain log message.
Thanks,
Mauro
^ permalink raw reply [flat|nested] 79+ messages in thread