[PATCH v7 0/3] Add support for Qualcomm A53 CPU clock

[PATCH v7 0/3] Add support for Qualcomm A53 CPU clock

[Georgi Djakov]

Changes since v6 (https://lkml.org/lkml/2016/9/7/347)
 * Addressed various comments from Stephen

Changes since v5 (https://lkml.org/lkml/2016/2/1/407)
 * Rebase to clk-next and update according to the recent API changes.

Changes since v4 (https://lkml.org/lkml/2015/12/14/367)
 * Convert to builtin drivers as now __clk_lookup() is used

Changes since v3 (https://lkml.org/lkml/2015/8/12/585)
 * Split driver into two parts - and separate A53 PLL and
   A53 clock controller drivers.
 * Drop the safe switch hook patch. Add a clock notifier in
   the clock provider to handle switching via safe mux and
   divider configuration.

Changes since v2 (https://lkml.org/lkml/2015/7/24/526)
 * Drop gpll0_vote patch.
 * Switch to the new clk_hw_* APIs.
 * Rebase to the current clk-next.

Changes since v1 (https://lkml.org/lkml/2015/6/12/193)
 * Drop SR2 PLL patch, as it is already applied.
 * Add gpll0_vote rate propagation patch.
 * Update/rebase patches to the current clk-next.


Georgi Djakov (3):
  clk: qcom: Add A53 PLL support
  clk: qcom: Add regmap mux-div clocks support
  clk: qcom: Add A53 clock driver

 .../devicetree/bindings/clock/qcom,a53cc.txt       |  23 ++
 .../devicetree/bindings/clock/qcom,a53pll.txt      |  20 ++
 drivers/clk/qcom/Kconfig                           |  17 ++
 drivers/clk/qcom/Makefile                          |   3 +
 drivers/clk/qcom/a53-pll.c                         |  94 ++++++++
 drivers/clk/qcom/a53cc.c                           | 152 +++++++++++++
 drivers/clk/qcom/clk-regmap-mux-div.c              | 237 +++++++++++++++++++++
 drivers/clk/qcom/clk-regmap-mux-div.h              |  52 +++++
 8 files changed, 598 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,a53cc.txt
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,a53pll.txt
 create mode 100644 drivers/clk/qcom/a53-pll.c
 create mode 100644 drivers/clk/qcom/a53cc.c
 create mode 100644 drivers/clk/qcom/clk-regmap-mux-div.c
 create mode 100644 drivers/clk/qcom/clk-regmap-mux-div.h

[PATCH v7 1/3] clk: qcom: Add A53 PLL support

[Georgi Djakov]

Add support for the PLL, which generates the higher range of CPU
frequencies on MSM8916 platforms.

Signed-off-by: Georgi Djakov <georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 .../devicetree/bindings/clock/qcom,a53pll.txt      | 20 +++++
 drivers/clk/qcom/Kconfig                           |  9 +++
 drivers/clk/qcom/Makefile                          |  1 +
 drivers/clk/qcom/a53-pll.c                         | 94 ++++++++++++++++++++++
 4 files changed, 124 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,a53pll.txt
 create mode 100644 drivers/clk/qcom/a53-pll.c

diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.txt b/Documentation/devicetree/bindings/clock/qcom,a53pll.txt
new file mode 100644
index 000000000000..6a8c03bfbcb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.txt
@@ -0,0 +1,20 @@
+MSM8916 A53 PLL Binding
+---------------
+The A53 PLL on MSM8916 platforms is the main CPU PLL used for frequencies
+above 1GHz.
+
+Required properties :
+- compatible : Shall contain only one of the following:
+
+		"qcom,a53pll-msm8916"
+
+- reg : shall contain base register location and length
+- #clock-cells : must be set to <0>
+
+Example:
+
+	a53pll: a53pll@b016000 {
+		compatible = "qcom,a53pll-msm8916";
+		reg = <0x0b016000 0x40>;
+		#clock-cells = <0>;
+	};
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 0146d3c2547f..a889f0b14b54 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -150,3 +150,12 @@ config MSM_MMCC_8996
 	  Support for the multimedia clock controller on msm8996 devices.
 	  Say Y if you want to support multimedia devices such as display,
 	  graphics, video encode/decode, camera, etc.
+
+config QCOM_A53PLL
+	bool "A53 PLL"
+	depends on COMMON_CLK_QCOM
+	help
+	  Support for the A53 PLL on some Qualcomm devices. It provides
+	  support for CPU frequencies above 1GHz.
+	  Say Y if you want to support CPU frequency scaling on devices
+	  such as MSM8916.
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 1fb1f5476cb0..7d27f47f0c92 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -29,3 +29,4 @@ obj-$(CONFIG_MSM_LCC_8960) += lcc-msm8960.o
 obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
 obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
 obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
+obj-$(CONFIG_QCOM_A53PLL) += a53-pll.o
diff --git a/drivers/clk/qcom/a53-pll.c b/drivers/clk/qcom/a53-pll.c
new file mode 100644
index 000000000000..40610d4076dd
--- /dev/null
+++ b/drivers/clk/qcom/a53-pll.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2016, Linaro Limited
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "clk-pll.h"
+#include "clk-regmap.h"
+
+static const struct pll_freq_tbl a53pll_freq[] = {
+	{  998400000, 52, 0x0, 0x1, 0 },
+	{ 1094400000, 57, 0x0, 0x1, 0 },
+	{ 1152000000, 62, 0x0, 0x1, 0 },
+	{ 1209600000, 65, 0x0, 0x1, 0 },
+	{ 1401600000, 73, 0x0, 0x1, 0 },
+};
+
+static const struct regmap_config a53pll_regmap_config = {
+	.reg_bits		= 32,
+	.reg_stride		= 4,
+	.val_bits		= 32,
+	.max_register		= 0x40,
+	.fast_io		= true,
+	.val_format_endian	= REGMAP_ENDIAN_LITTLE,
+};
+
+static const struct of_device_id qcom_a53pll_match_table[] = {
+	{ .compatible = "qcom,a53pll-msm8916" },
+	{ }
+};
+
+static int qcom_a53pll_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct clk_pll *pll;
+	struct resource *res;
+	void __iomem *base;
+	struct regmap *regmap;
+	struct clk_init_data init = { };
+
+	pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	regmap = devm_regmap_init_mmio(dev, base, &a53pll_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	pll->l_reg = 0x04;
+	pll->m_reg = 0x08;
+	pll->n_reg = 0x0c;
+	pll->config_reg = 0x14;
+	pll->mode_reg = 0x00;
+	pll->status_reg = 0x1c;
+	pll->status_bit = 16;
+	pll->freq_tbl = a53pll_freq;
+
+	init.name = "a53pll";
+	init.parent_names = (const char *[]){ "xo" };
+	init.num_parents = 1;
+	init.ops = &clk_pll_sr2_ops;
+	init.flags = CLK_IS_CRITICAL;
+	pll->clkr.hw.init = &init;
+
+	return devm_clk_register_regmap(dev, &pll->clkr);
+}
+
+static struct platform_driver qcom_a53pll_driver = {
+	.probe = qcom_a53pll_probe,
+	.driver = {
+		.name = "qcom-a53pll",
+		.of_match_table = qcom_a53pll_match_table,
+	},
+};
+
+builtin_platform_driver(qcom_a53pll_driver);
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v7 1/3] clk: qcom: Add A53 PLL support

[Georgi Djakov]

Add support for the PLL, which generates the higher range of CPU
frequencies on MSM8916 platforms.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
 .../devicetree/bindings/clock/qcom,a53pll.txt      | 20 +++++
 drivers/clk/qcom/Kconfig                           |  9 +++
 drivers/clk/qcom/Makefile                          |  1 +
 drivers/clk/qcom/a53-pll.c                         | 94 ++++++++++++++++++++++
 4 files changed, 124 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,a53pll.txt
 create mode 100644 drivers/clk/qcom/a53-pll.c

diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.txt b/Documentation/devicetree/bindings/clock/qcom,a53pll.txt
new file mode 100644
index 000000000000..6a8c03bfbcb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.txt
@@ -0,0 +1,20 @@
+MSM8916 A53 PLL Binding
+---------------
+The A53 PLL on MSM8916 platforms is the main CPU PLL used for frequencies
+above 1GHz.
+
+Required properties :
+- compatible : Shall contain only one of the following:
+
+		"qcom,a53pll-msm8916"
+
+- reg : shall contain base register location and length
+- #clock-cells : must be set to <0>
+
+Example:
+
+	a53pll: a53pll@b016000 {
+		compatible = "qcom,a53pll-msm8916";
+		reg = <0x0b016000 0x40>;
+		#clock-cells = <0>;
+	};
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 0146d3c2547f..a889f0b14b54 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -150,3 +150,12 @@ config MSM_MMCC_8996
 	  Support for the multimedia clock controller on msm8996 devices.
 	  Say Y if you want to support multimedia devices such as display,
 	  graphics, video encode/decode, camera, etc.
+
+config QCOM_A53PLL
+	bool "A53 PLL"
+	depends on COMMON_CLK_QCOM
+	help
+	  Support for the A53 PLL on some Qualcomm devices. It provides
+	  support for CPU frequencies above 1GHz.
+	  Say Y if you want to support CPU frequency scaling on devices
+	  such as MSM8916.
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 1fb1f5476cb0..7d27f47f0c92 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -29,3 +29,4 @@ obj-$(CONFIG_MSM_LCC_8960) += lcc-msm8960.o
 obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
 obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
 obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
+obj-$(CONFIG_QCOM_A53PLL) += a53-pll.o
diff --git a/drivers/clk/qcom/a53-pll.c b/drivers/clk/qcom/a53-pll.c
new file mode 100644
index 000000000000..40610d4076dd
--- /dev/null
+++ b/drivers/clk/qcom/a53-pll.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2016, Linaro Limited
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "clk-pll.h"
+#include "clk-regmap.h"
+
+static const struct pll_freq_tbl a53pll_freq[] = {
+	{  998400000, 52, 0x0, 0x1, 0 },
+	{ 1094400000, 57, 0x0, 0x1, 0 },
+	{ 1152000000, 62, 0x0, 0x1, 0 },
+	{ 1209600000, 65, 0x0, 0x1, 0 },
+	{ 1401600000, 73, 0x0, 0x1, 0 },
+};
+
+static const struct regmap_config a53pll_regmap_config = {
+	.reg_bits		= 32,
+	.reg_stride		= 4,
+	.val_bits		= 32,
+	.max_register		= 0x40,
+	.fast_io		= true,
+	.val_format_endian	= REGMAP_ENDIAN_LITTLE,
+};
+
+static const struct of_device_id qcom_a53pll_match_table[] = {
+	{ .compatible = "qcom,a53pll-msm8916" },
+	{ }
+};
+
+static int qcom_a53pll_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct clk_pll *pll;
+	struct resource *res;
+	void __iomem *base;
+	struct regmap *regmap;
+	struct clk_init_data init = { };
+
+	pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	regmap = devm_regmap_init_mmio(dev, base, &a53pll_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	pll->l_reg = 0x04;
+	pll->m_reg = 0x08;
+	pll->n_reg = 0x0c;
+	pll->config_reg = 0x14;
+	pll->mode_reg = 0x00;
+	pll->status_reg = 0x1c;
+	pll->status_bit = 16;
+	pll->freq_tbl = a53pll_freq;
+
+	init.name = "a53pll";
+	init.parent_names = (const char *[]){ "xo" };
+	init.num_parents = 1;
+	init.ops = &clk_pll_sr2_ops;
+	init.flags = CLK_IS_CRITICAL;
+	pll->clkr.hw.init = &init;
+
+	return devm_clk_register_regmap(dev, &pll->clkr);
+}
+
+static struct platform_driver qcom_a53pll_driver = {
+	.probe = qcom_a53pll_probe,
+	.driver = {
+		.name = "qcom-a53pll",
+		.of_match_table = qcom_a53pll_match_table,
+	},
+};
+
+builtin_platform_driver(qcom_a53pll_driver);

[PATCH v7 2/3] clk: qcom: Add regmap mux-div clocks support

[Georgi Djakov]

Add support for hardware that can switch both parent clocks and divider
at the same time. This avoids generating intermediate frequencies from
either the old parent clock and new divider or new parent clock and
old divider combinations.

Signed-off-by: Georgi Djakov <georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 drivers/clk/qcom/Makefile             |   1 +
 drivers/clk/qcom/clk-regmap-mux-div.c | 237 ++++++++++++++++++++++++++++++++++
 drivers/clk/qcom/clk-regmap-mux-div.h |  52 ++++++++
 3 files changed, 290 insertions(+)
 create mode 100644 drivers/clk/qcom/clk-regmap-mux-div.c
 create mode 100644 drivers/clk/qcom/clk-regmap-mux-div.h

diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 7d27f47f0c92..d3e142e577b0 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -9,6 +9,7 @@ clk-qcom-y += clk-rcg2.o
 clk-qcom-y += clk-branch.o
 clk-qcom-y += clk-regmap-divider.o
 clk-qcom-y += clk-regmap-mux.o
+clk-qcom-y += clk-regmap-mux-div.o
 clk-qcom-y += reset.o
 clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
 
diff --git a/drivers/clk/qcom/clk-regmap-mux-div.c b/drivers/clk/qcom/clk-regmap-mux-div.c
new file mode 100644
index 000000000000..682dbf906c89
--- /dev/null
+++ b/drivers/clk/qcom/clk-regmap-mux-div.c
@@ -0,0 +1,237 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/regmap.h>
+
+#include "clk-regmap-mux-div.h"
+
+#define CMD_RCGR			0x0
+#define CMD_RCGR_UPDATE			BIT(0)
+#define CMD_RCGR_DIRTY_CFG		BIT(4)
+#define CMD_RCGR_ROOT_OFF		BIT(31)
+#define CFG_RCGR			0x4
+
+#define to_clk_regmap_mux_div(_hw) \
+	container_of(to_clk_regmap(_hw), struct clk_regmap_mux_div, clkr)
+
+int __mux_div_set_src_div(struct clk_regmap_mux_div *md, u32 src, u32 div)
+{
+	int ret, count;
+	u32 val, mask;
+	const char *name = clk_hw_get_name(&md->clkr.hw);
+
+	val = (div << md->hid_shift) | (src << md->src_shift);
+	mask = ((BIT(md->hid_width) - 1) << md->hid_shift) |
+	       ((BIT(md->src_width) - 1) << md->src_shift);
+
+	ret = regmap_update_bits(md->clkr.regmap, CFG_RCGR + md->reg_offset,
+				 mask, val);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(md->clkr.regmap, CMD_RCGR + md->reg_offset,
+				 CMD_RCGR_UPDATE, CMD_RCGR_UPDATE);
+	if (ret)
+		return ret;
+
+	/* Wait for update to take effect */
+	for (count = 500; count > 0; count--) {
+		ret = regmap_read(md->clkr.regmap, CMD_RCGR + md->reg_offset,
+				  &val);
+		if (ret)
+			return ret;
+		if (!(val & CMD_RCGR_UPDATE))
+			return 0;
+		udelay(1);
+	}
+
+	pr_err("%s: RCG did not update its configuration", name);
+	return -EBUSY;
+}
+
+static void __mux_div_get_src_div(struct clk_regmap_mux_div *md, u32 *src,
+				  u32 *div)
+{
+	u32 val, d, s;
+	const char *name = clk_hw_get_name(&md->clkr.hw);
+
+	regmap_read(md->clkr.regmap, CMD_RCGR + md->reg_offset, &val);
+
+	if (val & CMD_RCGR_DIRTY_CFG) {
+		pr_err("%s: RCG configuration is pending\n", name);
+		return;
+	}
+
+	regmap_read(md->clkr.regmap, CFG_RCGR + md->reg_offset, &val);
+	s = (val >> md->src_shift);
+	s &= BIT(md->src_width) - 1;
+	*src = s;
+
+	d = (val >> md->hid_shift);
+	d &= BIT(md->hid_width) - 1;
+	*div = d;
+}
+
+static inline bool is_better_rate(unsigned long req, unsigned long best,
+				  unsigned long new)
+{
+	return (req <= new && new < best) || (best < req && best < new);
+}
+
+static int mux_div_determine_rate(struct clk_hw *hw,
+				  struct clk_rate_request *req)
+{
+	struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
+	unsigned int i, div, max_div;
+	unsigned long actual_rate, best_rate = 0;
+	unsigned long req_rate = req->rate;
+
+	for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
+		struct clk_hw *parent = clk_hw_get_parent_by_index(hw, i);
+		unsigned long parent_rate = clk_hw_get_rate(parent);
+
+		max_div = BIT(md->hid_width) - 1;
+		for (div = 1; div < max_div; div++) {
+			parent_rate = mult_frac(req_rate, div, 2);
+			parent_rate = clk_hw_round_rate(parent, parent_rate);
+			actual_rate = mult_frac(parent_rate, 2, div);
+
+			if (is_better_rate(req_rate, best_rate, actual_rate)) {
+				best_rate = actual_rate;
+				req->rate = best_rate;
+				req->best_parent_rate = parent_rate;
+				req->best_parent_hw = parent;
+			}
+
+			if (actual_rate < req_rate || best_rate <= req_rate)
+				break;
+		}
+	}
+
+	if (!best_rate)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int __mux_div_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+					 unsigned long prate, u32 src)
+{
+	struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
+	int ret;
+	u32 div, max_div, best_src = 0, best_div = 0;
+	unsigned int i;
+	unsigned long actual_rate, best_rate = 0;
+
+	for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
+		struct clk_hw *parent = clk_hw_get_parent_by_index(hw, i);
+		unsigned long parent_rate = clk_hw_get_rate(parent);
+
+		max_div = BIT(md->hid_width) - 1;
+		for (div = 1; div < max_div; div++) {
+			parent_rate = mult_frac(rate, div, 2);
+			parent_rate = clk_hw_round_rate(parent, parent_rate);
+			actual_rate = mult_frac(parent_rate, 2, div);
+
+			if (is_better_rate(rate, best_rate, actual_rate)) {
+				best_rate = actual_rate;
+				best_src = md->parent_map[i].cfg;
+				best_div = div - 1;
+			}
+
+			if (actual_rate < rate || best_rate <= rate)
+				break;
+		}
+	}
+
+	ret = __mux_div_set_src_div(md, best_src, best_div);
+	if (!ret) {
+		md->div = best_div;
+		md->src = best_src;
+	}
+
+	return ret;
+}
+
+static u8 mux_div_get_parent(struct clk_hw *hw)
+{
+	struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
+	const char *name = clk_hw_get_name(hw);
+	u32 i, div, src = 0;
+
+	__mux_div_get_src_div(md, &src, &div);
+
+	for (i = 0; i < clk_hw_get_num_parents(hw); i++)
+		if (src == md->parent_map[i].cfg)
+			return i;
+
+	pr_err("%s: Can't find parent with src %d\n", name, src);
+	return 0;
+}
+
+static int mux_div_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
+
+	return __mux_div_set_src_div(md, md->parent_map[index].cfg, md->div);
+}
+
+static int mux_div_set_rate(struct clk_hw *hw,
+			    unsigned long rate, unsigned long prate)
+{
+	struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
+
+	return __mux_div_set_rate_and_parent(hw, rate, prate, md->src);
+}
+
+static int mux_div_set_rate_and_parent(struct clk_hw *hw,  unsigned long rate,
+				       unsigned long prate, u8 index)
+{
+	struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
+
+	return __mux_div_set_rate_and_parent(hw, rate, prate,
+					     md->parent_map[index].cfg);
+}
+
+static unsigned long mux_div_recalc_rate(struct clk_hw *hw, unsigned long prate)
+{
+	struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
+	u32 div, src;
+	int i, num_parents = clk_hw_get_num_parents(hw);
+	const char *name = clk_hw_get_name(hw);
+
+	__mux_div_get_src_div(md, &src, &div);
+	for (i = 0; i < num_parents; i++)
+		if (src == md->parent_map[i].cfg) {
+			struct clk_hw *p = clk_hw_get_parent_by_index(hw, i);
+			unsigned long parent_rate = clk_hw_get_rate(p);
+
+			return mult_frac(parent_rate, 2, div + 1);
+		}
+
+	pr_err("%s: Can't find parent %d\n", name, src);
+	return 0;
+}
+
+const struct clk_ops clk_regmap_mux_div_ops = {
+	.get_parent = mux_div_get_parent,
+	.set_parent = mux_div_set_parent,
+	.set_rate = mux_div_set_rate,
+	.set_rate_and_parent = mux_div_set_rate_and_parent,
+	.determine_rate = mux_div_determine_rate,
+	.recalc_rate = mux_div_recalc_rate,
+};
diff --git a/drivers/clk/qcom/clk-regmap-mux-div.h b/drivers/clk/qcom/clk-regmap-mux-div.h
new file mode 100644
index 000000000000..3380e8f6e8a1
--- /dev/null
+++ b/drivers/clk/qcom/clk-regmap-mux-div.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __QCOM_CLK_REGMAP_MUX_DIV_H__
+#define __QCOM_CLK_REGMAP_MUX_DIV_H__
+
+#include <linux/clk-provider.h>
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+
+/**
+ * struct mux_div_clk - combined mux/divider clock
+ * @reg_offset: offset of the mux/divider register
+ * @hid_width:	number of bits in half integer divider
+ * @hid_shift:	lowest bit of hid value field
+ * @src_width:	number of bits in source select
+ * @src_shift:	lowest bit of source select field
+ * @div:	the divider raw configuration value
+ * @src:	the mux index which will be used if the clock is enabled
+ * @parent_map:	pointer to parent_map struct
+ * @clkr:	handle between common and hardware-specific interfaces
+ * @clk_nb:	clock notifier registered for clock rate changes of the A53 PLL
+ */
+
+struct clk_regmap_mux_div {
+	u32				reg_offset;
+	u32				hid_width;
+	u32				hid_shift;
+	u32				src_width;
+	u32				src_shift;
+	u32				div;
+	u32				src;
+	const struct parent_map		*parent_map;
+	struct clk_regmap		clkr;
+	struct notifier_block		clk_nb;
+};
+
+extern const struct clk_ops clk_regmap_mux_div_ops;
+int __mux_div_set_src_div(struct clk_regmap_mux_div *md, u32 src, u32 div);
+
+#endif
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v7 2/3] clk: qcom: Add regmap mux-div clocks support

[Georgi Djakov]

Add support for hardware that can switch both parent clocks and divider
at the same time. This avoids generating intermediate frequencies from
either the old parent clock and new divider or new parent clock and
old divider combinations.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
 drivers/clk/qcom/Makefile             |   1 +
 drivers/clk/qcom/clk-regmap-mux-div.c | 237 ++++++++++++++++++++++++++++++++++
 drivers/clk/qcom/clk-regmap-mux-div.h |  52 ++++++++
 3 files changed, 290 insertions(+)
 create mode 100644 drivers/clk/qcom/clk-regmap-mux-div.c
 create mode 100644 drivers/clk/qcom/clk-regmap-mux-div.h

diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 7d27f47f0c92..d3e142e577b0 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -9,6 +9,7 @@ clk-qcom-y += clk-rcg2.o
 clk-qcom-y += clk-branch.o
 clk-qcom-y += clk-regmap-divider.o
 clk-qcom-y += clk-regmap-mux.o
+clk-qcom-y += clk-regmap-mux-div.o
 clk-qcom-y += reset.o
 clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
 
diff --git a/drivers/clk/qcom/clk-regmap-mux-div.c b/drivers/clk/qcom/clk-regmap-mux-div.c
new file mode 100644
index 000000000000..682dbf906c89
--- /dev/null
+++ b/drivers/clk/qcom/clk-regmap-mux-div.c
@@ -0,0 +1,237 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/regmap.h>
+
+#include "clk-regmap-mux-div.h"
+
+#define CMD_RCGR			0x0
+#define CMD_RCGR_UPDATE			BIT(0)
+#define CMD_RCGR_DIRTY_CFG		BIT(4)
+#define CMD_RCGR_ROOT_OFF		BIT(31)
+#define CFG_RCGR			0x4
+
+#define to_clk_regmap_mux_div(_hw) \
+	container_of(to_clk_regmap(_hw), struct clk_regmap_mux_div, clkr)
+
+int __mux_div_set_src_div(struct clk_regmap_mux_div *md, u32 src, u32 div)
+{
+	int ret, count;
+	u32 val, mask;
+	const char *name = clk_hw_get_name(&md->clkr.hw);
+
+	val = (div << md->hid_shift) | (src << md->src_shift);
+	mask = ((BIT(md->hid_width) - 1) << md->hid_shift) |
+	       ((BIT(md->src_width) - 1) << md->src_shift);
+
+	ret = regmap_update_bits(md->clkr.regmap, CFG_RCGR + md->reg_offset,
+				 mask, val);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(md->clkr.regmap, CMD_RCGR + md->reg_offset,
+				 CMD_RCGR_UPDATE, CMD_RCGR_UPDATE);
+	if (ret)
+		return ret;
+
+	/* Wait for update to take effect */
+	for (count = 500; count > 0; count--) {
+		ret = regmap_read(md->clkr.regmap, CMD_RCGR + md->reg_offset,
+				  &val);
+		if (ret)
+			return ret;
+		if (!(val & CMD_RCGR_UPDATE))
+			return 0;
+		udelay(1);
+	}
+
+	pr_err("%s: RCG did not update its configuration", name);
+	return -EBUSY;
+}
+
+static void __mux_div_get_src_div(struct clk_regmap_mux_div *md, u32 *src,
+				  u32 *div)
+{
+	u32 val, d, s;
+	const char *name = clk_hw_get_name(&md->clkr.hw);
+
+	regmap_read(md->clkr.regmap, CMD_RCGR + md->reg_offset, &val);
+
+	if (val & CMD_RCGR_DIRTY_CFG) {
+		pr_err("%s: RCG configuration is pending\n", name);
+		return;
+	}
+
+	regmap_read(md->clkr.regmap, CFG_RCGR + md->reg_offset, &val);
+	s = (val >> md->src_shift);
+	s &= BIT(md->src_width) - 1;
+	*src = s;
+
+	d = (val >> md->hid_shift);
+	d &= BIT(md->hid_width) - 1;
+	*div = d;
+}
+
+static inline bool is_better_rate(unsigned long req, unsigned long best,
+				  unsigned long new)
+{
+	return (req <= new && new < best) || (best < req && best < new);
+}
+
+static int mux_div_determine_rate(struct clk_hw *hw,
+				  struct clk_rate_request *req)
+{
+	struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
+	unsigned int i, div, max_div;
+	unsigned long actual_rate, best_rate = 0;
+	unsigned long req_rate = req->rate;
+
+	for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
+		struct clk_hw *parent = clk_hw_get_parent_by_index(hw, i);
+		unsigned long parent_rate = clk_hw_get_rate(parent);
+
+		max_div = BIT(md->hid_width) - 1;
+		for (div = 1; div < max_div; div++) {
+			parent_rate = mult_frac(req_rate, div, 2);
+			parent_rate = clk_hw_round_rate(parent, parent_rate);
+			actual_rate = mult_frac(parent_rate, 2, div);
+
+			if (is_better_rate(req_rate, best_rate, actual_rate)) {
+				best_rate = actual_rate;
+				req->rate = best_rate;
+				req->best_parent_rate = parent_rate;
+				req->best_parent_hw = parent;
+			}
+
+			if (actual_rate < req_rate || best_rate <= req_rate)
+				break;
+		}
+	}
+
+	if (!best_rate)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int __mux_div_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+					 unsigned long prate, u32 src)
+{
+	struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
+	int ret;
+	u32 div, max_div, best_src = 0, best_div = 0;
+	unsigned int i;
+	unsigned long actual_rate, best_rate = 0;
+
+	for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
+		struct clk_hw *parent = clk_hw_get_parent_by_index(hw, i);
+		unsigned long parent_rate = clk_hw_get_rate(parent);
+
+		max_div = BIT(md->hid_width) - 1;
+		for (div = 1; div < max_div; div++) {
+			parent_rate = mult_frac(rate, div, 2);
+			parent_rate = clk_hw_round_rate(parent, parent_rate);
+			actual_rate = mult_frac(parent_rate, 2, div);
+
+			if (is_better_rate(rate, best_rate, actual_rate)) {
+				best_rate = actual_rate;
+				best_src = md->parent_map[i].cfg;
+				best_div = div - 1;
+			}
+
+			if (actual_rate < rate || best_rate <= rate)
+				break;
+		}
+	}
+
+	ret = __mux_div_set_src_div(md, best_src, best_div);
+	if (!ret) {
+		md->div = best_div;
+		md->src = best_src;
+	}
+
+	return ret;
+}
+
+static u8 mux_div_get_parent(struct clk_hw *hw)
+{
+	struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
+	const char *name = clk_hw_get_name(hw);
+	u32 i, div, src = 0;
+
+	__mux_div_get_src_div(md, &src, &div);
+
+	for (i = 0; i < clk_hw_get_num_parents(hw); i++)
+		if (src == md->parent_map[i].cfg)
+			return i;
+
+	pr_err("%s: Can't find parent with src %d\n", name, src);
+	return 0;
+}
+
+static int mux_div_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
+
+	return __mux_div_set_src_div(md, md->parent_map[index].cfg, md->div);
+}
+
+static int mux_div_set_rate(struct clk_hw *hw,
+			    unsigned long rate, unsigned long prate)
+{
+	struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
+
+	return __mux_div_set_rate_and_parent(hw, rate, prate, md->src);
+}
+
+static int mux_div_set_rate_and_parent(struct clk_hw *hw,  unsigned long rate,
+				       unsigned long prate, u8 index)
+{
+	struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
+
+	return __mux_div_set_rate_and_parent(hw, rate, prate,
+					     md->parent_map[index].cfg);
+}
+
+static unsigned long mux_div_recalc_rate(struct clk_hw *hw, unsigned long prate)
+{
+	struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
+	u32 div, src;
+	int i, num_parents = clk_hw_get_num_parents(hw);
+	const char *name = clk_hw_get_name(hw);
+
+	__mux_div_get_src_div(md, &src, &div);
+	for (i = 0; i < num_parents; i++)
+		if (src == md->parent_map[i].cfg) {
+			struct clk_hw *p = clk_hw_get_parent_by_index(hw, i);
+			unsigned long parent_rate = clk_hw_get_rate(p);
+
+			return mult_frac(parent_rate, 2, div + 1);
+		}
+
+	pr_err("%s: Can't find parent %d\n", name, src);
+	return 0;
+}
+
+const struct clk_ops clk_regmap_mux_div_ops = {
+	.get_parent = mux_div_get_parent,
+	.set_parent = mux_div_set_parent,
+	.set_rate = mux_div_set_rate,
+	.set_rate_and_parent = mux_div_set_rate_and_parent,
+	.determine_rate = mux_div_determine_rate,
+	.recalc_rate = mux_div_recalc_rate,
+};
diff --git a/drivers/clk/qcom/clk-regmap-mux-div.h b/drivers/clk/qcom/clk-regmap-mux-div.h
new file mode 100644
index 000000000000..3380e8f6e8a1
--- /dev/null
+++ b/drivers/clk/qcom/clk-regmap-mux-div.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __QCOM_CLK_REGMAP_MUX_DIV_H__
+#define __QCOM_CLK_REGMAP_MUX_DIV_H__
+
+#include <linux/clk-provider.h>
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+
+/**
+ * struct mux_div_clk - combined mux/divider clock
+ * @reg_offset: offset of the mux/divider register
+ * @hid_width:	number of bits in half integer divider
+ * @hid_shift:	lowest bit of hid value field
+ * @src_width:	number of bits in source select
+ * @src_shift:	lowest bit of source select field
+ * @div:	the divider raw configuration value
+ * @src:	the mux index which will be used if the clock is enabled
+ * @parent_map:	pointer to parent_map struct
+ * @clkr:	handle between common and hardware-specific interfaces
+ * @clk_nb:	clock notifier registered for clock rate changes of the A53 PLL
+ */
+
+struct clk_regmap_mux_div {
+	u32				reg_offset;
+	u32				hid_width;
+	u32				hid_shift;
+	u32				src_width;
+	u32				src_shift;
+	u32				div;
+	u32				src;
+	const struct parent_map		*parent_map;
+	struct clk_regmap		clkr;
+	struct notifier_block		clk_nb;
+};
+
+extern const struct clk_ops clk_regmap_mux_div_ops;
+int __mux_div_set_src_div(struct clk_regmap_mux_div *md, u32 src, u32 div);
+
+#endif

[PATCH v7 3/3] clk: qcom: Add A53 clock driver

[Georgi Djakov]

Add a driver for the A53 Clock Controller. It is a hardware block that
implements a combined mux and half integer divider functionality. It can
choose between a fixed-rate clock or the dedicated A53 PLL. The source
and the divider can be set both at the same time.

This is required for enabling CPU frequency scaling on platforms like
MSM8916.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
 .../devicetree/bindings/clock/qcom,a53cc.txt       |  23 ++++
 drivers/clk/qcom/Kconfig                           |   8 ++
 drivers/clk/qcom/Makefile                          |   1 +
 drivers/clk/qcom/a53cc.c                           | 152 +++++++++++++++++++++
 4 files changed, 184 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,a53cc.txt
 create mode 100644 drivers/clk/qcom/a53cc.c

diff --git a/Documentation/devicetree/bindings/clock/qcom,a53cc.txt b/Documentation/devicetree/bindings/clock/qcom,a53cc.txt
new file mode 100644
index 000000000000..82d1634a2713
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,a53cc.txt
@@ -0,0 +1,23 @@
+Qualcomm A53 CPU Clock Controller Binding
+------------------------------------------------
+The A53 CPU Clock Controller is hardware, which provides a combined
+mux and divider functionality for the CPU clocks. It can choose between
+a fixed rate clock and the dedicated A53 PLL. This hardware block is used
+on platforms such as msm8916.
+
+Required properties :
+- compatible : shall contain:
+
+			"qcom,a53cc-msm8916"
+
+- reg : shall contain base register location and length
+	of the APCS region
+- #clock-cells : shall contain 1
+
+Example:
+
+	apcs: syscon@b011000 {
+		compatible = "qcom,a53cc-msm8916";
+		reg = <0x0b011000 0x1000>;
+		#clock-cells = <1>;
+	};
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index a889f0b14b54..59dfcdc340e4 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -159,3 +159,11 @@ config QCOM_A53PLL
 	  support for CPU frequencies above 1GHz.
 	  Say Y if you want to support CPU frequency scaling on devices
 	  such as MSM8916.
+
+config QCOM_A53CC
+	bool "A53 Clock Controller"
+	depends on COMMON_CLK_QCOM && QCOM_A53PLL
+	help
+	  Support for the A53 clock controller on some Qualcomm devices.
+	  Say Y if you want to support CPU frequency scaling on devices
+	  such as MSM8916.
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index d3e142e577b0..980a5d729aa4 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -30,4 +30,5 @@ obj-$(CONFIG_MSM_LCC_8960) += lcc-msm8960.o
 obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
 obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
 obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
+obj-$(CONFIG_QCOM_A53CC) += a53cc.o
 obj-$(CONFIG_QCOM_A53PLL) += a53-pll.o
diff --git a/drivers/clk/qcom/a53cc.c b/drivers/clk/qcom/a53cc.c
new file mode 100644
index 000000000000..f9b19939e8ae
--- /dev/null
+++ b/drivers/clk/qcom/a53cc.c
@@ -0,0 +1,152 @@
+/*
+ * Copyright (c) 2016, Linaro Limited
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "clk-regmap.h"
+#include "clk-regmap-mux-div.h"
+
+enum {
+	P_GPLL0,
+	P_A53PLL,
+};
+
+static const struct parent_map gpll0_a53cc_map[] = {
+	{ P_GPLL0, 4 },
+	{ P_A53PLL, 5 },
+};
+
+static const char * const gpll0_a53cc[] = {
+	"gpll0_vote",
+	"a53pll",
+};
+
+static const struct regmap_config a53cc_regmap_config = {
+	.reg_bits		= 32,
+	.reg_stride		= 4,
+	.val_bits		= 32,
+	.max_register		= 0x1000,
+	.fast_io		= true,
+	.val_format_endian	= REGMAP_ENDIAN_LITTLE,
+};
+
+/*
+ * We use the notifier function for switching to a temporary safe configuration
+ * (mux and divider), while the a53 pll is reconfigured.
+ */
+static int a53cc_notifier_cb(struct notifier_block *nb, unsigned long event,
+			     void *data)
+{
+	int ret = 0;
+	struct clk_regmap_mux_div *md = container_of(nb,
+						     struct clk_regmap_mux_div,
+						     clk_nb);
+	if (event == PRE_RATE_CHANGE)
+		/* set the mux and divider to safe frequency (400mhz) */
+		ret = __mux_div_set_src_div(md, 4, 3);
+
+	return notifier_from_errno(ret);
+}
+
+static const struct of_device_id qcom_a53cc_match_table[] = {
+	{ .compatible = "qcom,a53cc-msm8916" },
+	{ }
+};
+
+static int qcom_a53cc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct clk_regmap_mux_div *a53cc;
+	struct resource *res;
+	void __iomem *base;
+	struct clk *pclk;
+	struct regmap *regmap;
+	struct clk_init_data init = { };
+	int ret;
+
+	a53cc = devm_kzalloc(dev, sizeof(*a53cc), GFP_KERNEL);
+	if (!a53cc)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	a53cc->reg_offset = 0x50;
+	a53cc->hid_width = 5;
+	a53cc->hid_shift = 0;
+	a53cc->src_width = 3;
+	a53cc->src_shift = 8;
+	a53cc->parent_map = gpll0_a53cc_map;
+
+	init.name = "a53mux";
+	init.parent_names = gpll0_a53cc;
+	init.num_parents = 2;
+	init.ops = &clk_regmap_mux_div_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	a53cc->clkr.hw.init = &init;
+
+	pclk = __clk_lookup(gpll0_a53cc[1]);
+	if (!pclk)
+		return -EPROBE_DEFER;
+
+	a53cc->clk_nb.notifier_call = a53cc_notifier_cb;
+	ret = clk_notifier_register(pclk, &a53cc->clk_nb);
+	if (ret) {
+		dev_err(dev, "failed to register clock notifier: %d\n", ret);
+		return ret;
+	}
+
+	regmap = devm_regmap_init_mmio(dev, base, &a53cc_regmap_config);
+	if (IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
+		dev_err(dev, "failed to init regmap mmio: %d\n", ret);
+		goto err;
+	}
+
+	a53cc->clkr.regmap = regmap;
+
+	ret = devm_clk_register_regmap(dev, &a53cc->clkr);
+	if (ret) {
+		dev_err(dev, "failed to register regmap clock: %d\n", ret);
+		goto err;
+	}
+
+	ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_simple_get,
+				     &a53cc->clkr.hw);
+	if (ret) {
+		dev_err(dev, "failed to add clock provider: %d\n", ret);
+		goto err;
+	}
+
+	return 0;
+err:
+	clk_notifier_unregister(pclk, &a53cc->clk_nb);
+	return ret;
+}
+
+static struct platform_driver qcom_a53cc_driver = {
+	.probe = qcom_a53cc_probe,
+	.driver = {
+		.name = "qcom-a53cc",
+		.of_match_table = qcom_a53cc_match_table,
+	},
+};
+
+builtin_platform_driver(qcom_a53cc_driver);

Re: [PATCH v7 1/3] clk: qcom: Add A53 PLL support

[Rob Herring]

On Mon, Oct 31, 2016 at 04:55:24PM +0200, Georgi Djakov wrote:
> Add support for the PLL, which generates the higher range of CPU
> frequencies on MSM8916 platforms.
> 
> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
> ---
>  .../devicetree/bindings/clock/qcom,a53pll.txt      | 20 +++++
>  drivers/clk/qcom/Kconfig                           |  9 +++
>  drivers/clk/qcom/Makefile                          |  1 +
>  drivers/clk/qcom/a53-pll.c                         | 94 ++++++++++++++++++++++
>  4 files changed, 124 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/qcom,a53pll.txt
>  create mode 100644 drivers/clk/qcom/a53-pll.c
> 
> diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.txt b/Documentation/devicetree/bindings/clock/qcom,a53pll.txt
> new file mode 100644
> index 000000000000..6a8c03bfbcb5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.txt
> @@ -0,0 +1,20 @@
> +MSM8916 A53 PLL Binding
> +---------------
> +The A53 PLL on MSM8916 platforms is the main CPU PLL used for frequencies
> +above 1GHz.
> +
> +Required properties :
> +- compatible : Shall contain only one of the following:
> +
> +		"qcom,a53pll-msm8916"

Generally, the ordering is <vendor>,<soc>-<block>.

> +
> +- reg : shall contain base register location and length
> +- #clock-cells : must be set to <0>
> +
> +Example:
> +
> +	a53pll: a53pll@b016000 {

clock@...

> +		compatible = "qcom,a53pll-msm8916";
> +		reg = <0x0b016000 0x40>;
> +		#clock-cells = <0>;
> +	};

Re: [PATCH v7 3/3] clk: qcom: Add A53 clock driver

[Rob Herring]

On Mon, Oct 31, 2016 at 04:55:26PM +0200, Georgi Djakov wrote:
> Add a driver for the A53 Clock Controller. It is a hardware block that
> implements a combined mux and half integer divider functionality. It can
> choose between a fixed-rate clock or the dedicated A53 PLL. The source
> and the divider can be set both at the same time.
> 
> This is required for enabling CPU frequency scaling on platforms like
> MSM8916.
> 
> Signed-off-by: Georgi Djakov <georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
>  .../devicetree/bindings/clock/qcom,a53cc.txt       |  23 ++++
>  drivers/clk/qcom/Kconfig                           |   8 ++
>  drivers/clk/qcom/Makefile                          |   1 +
>  drivers/clk/qcom/a53cc.c                           | 152 +++++++++++++++++++++
>  4 files changed, 184 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/qcom,a53cc.txt
>  create mode 100644 drivers/clk/qcom/a53cc.c
> 
> diff --git a/Documentation/devicetree/bindings/clock/qcom,a53cc.txt b/Documentation/devicetree/bindings/clock/qcom,a53cc.txt
> new file mode 100644
> index 000000000000..82d1634a2713
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qcom,a53cc.txt
> @@ -0,0 +1,23 @@
> +Qualcomm A53 CPU Clock Controller Binding
> +------------------------------------------------
> +The A53 CPU Clock Controller is hardware, which provides a combined
> +mux and divider functionality for the CPU clocks. It can choose between
> +a fixed rate clock and the dedicated A53 PLL. This hardware block is used
> +on platforms such as msm8916.
> +
> +Required properties :
> +- compatible : shall contain:
> +
> +			"qcom,a53cc-msm8916"

Same comment on the ordering. With that, for the binding:

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

> +
> +- reg : shall contain base register location and length
> +	of the APCS region
> +- #clock-cells : shall contain 1
> +
> +Example:
> +
> +	apcs: syscon@b011000 {
> +		compatible = "qcom,a53cc-msm8916";
> +		reg = <0x0b011000 0x1000>;
> +		#clock-cells = <1>;
> +	};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v7 3/3] clk: qcom: Add A53 clock driver

[Rob Herring]

On Mon, Oct 31, 2016 at 04:55:26PM +0200, Georgi Djakov wrote:
> Add a driver for the A53 Clock Controller. It is a hardware block that
> implements a combined mux and half integer divider functionality. It can
> choose between a fixed-rate clock or the dedicated A53 PLL. The source
> and the divider can be set both at the same time.
> 
> This is required for enabling CPU frequency scaling on platforms like
> MSM8916.
> 
> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
> ---
>  .../devicetree/bindings/clock/qcom,a53cc.txt       |  23 ++++
>  drivers/clk/qcom/Kconfig                           |   8 ++
>  drivers/clk/qcom/Makefile                          |   1 +
>  drivers/clk/qcom/a53cc.c                           | 152 +++++++++++++++++++++
>  4 files changed, 184 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/qcom,a53cc.txt
>  create mode 100644 drivers/clk/qcom/a53cc.c
> 
> diff --git a/Documentation/devicetree/bindings/clock/qcom,a53cc.txt b/Documentation/devicetree/bindings/clock/qcom,a53cc.txt
> new file mode 100644
> index 000000000000..82d1634a2713
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qcom,a53cc.txt
> @@ -0,0 +1,23 @@
> +Qualcomm A53 CPU Clock Controller Binding
> +------------------------------------------------
> +The A53 CPU Clock Controller is hardware, which provides a combined
> +mux and divider functionality for the CPU clocks. It can choose between
> +a fixed rate clock and the dedicated A53 PLL. This hardware block is used
> +on platforms such as msm8916.
> +
> +Required properties :
> +- compatible : shall contain:
> +
> +			"qcom,a53cc-msm8916"

Same comment on the ordering. With that, for the binding:

Acked-by: Rob Herring <robh@kernel.org>

> +
> +- reg : shall contain base register location and length
> +	of the APCS region
> +- #clock-cells : shall contain 1
> +
> +Example:
> +
> +	apcs: syscon@b011000 {
> +		compatible = "qcom,a53cc-msm8916";
> +		reg = <0x0b011000 0x1000>;
> +		#clock-cells = <1>;
> +	};

Re: [PATCH v7 3/3] clk: qcom: Add A53 clock driver

[Georgi Djakov]

On 11/09/2016 08:24 PM, Rob Herring wrote:
> On Mon, Oct 31, 2016 at 04:55:26PM +0200, Georgi Djakov wrote:
>> Add a driver for the A53 Clock Controller. It is a hardware block that
>> implements a combined mux and half integer divider functionality. It can
>> choose between a fixed-rate clock or the dedicated A53 PLL. The source
>> and the divider can be set both at the same time.
>>
>> This is required for enabling CPU frequency scaling on platforms like
>> MSM8916.
>>
>> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
>> ---
>>  .../devicetree/bindings/clock/qcom,a53cc.txt       |  23 ++++
>>  drivers/clk/qcom/Kconfig                           |   8 ++
>>  drivers/clk/qcom/Makefile                          |   1 +
>>  drivers/clk/qcom/a53cc.c                           | 152 +++++++++++++++++++++
>>  4 files changed, 184 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/clock/qcom,a53cc.txt
>>  create mode 100644 drivers/clk/qcom/a53cc.c
>>
>> diff --git a/Documentation/devicetree/bindings/clock/qcom,a53cc.txt b/Documentation/devicetree/bindings/clock/qcom,a53cc.txt
>> new file mode 100644
>> index 000000000000..82d1634a2713
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/qcom,a53cc.txt
>> @@ -0,0 +1,23 @@
>> +Qualcomm A53 CPU Clock Controller Binding
>> +------------------------------------------------
>> +The A53 CPU Clock Controller is hardware, which provides a combined
>> +mux and divider functionality for the CPU clocks. It can choose between
>> +a fixed rate clock and the dedicated A53 PLL. This hardware block is used
>> +on platforms such as msm8916.
>> +
>> +Required properties :
>> +- compatible : shall contain:
>> +
>> +			"qcom,a53cc-msm8916"
>
> Same comment on the ordering. With that, for the binding:
>
> Acked-by: Rob Herring <robh@kernel.org>
>

Thanks for reviewing, Rob. I am also going to make this a child node
as discussed here [1]. Please let me know if you have any comments.

[1]. https://lkml.org/lkml/2016/11/11/387

Thanks,
Georgi