Making rcu_normal=1 in RT

Making rcu_normal=1 in RT

[Luiz Capitulino]

Hi,

We have the following patch applied to the RT tree:

  commit a9d3cc781a3306bfa332fa7cb6134b70696058d5
  Author: Josh Cartwright <joshc@ni.com>
  Date:   Tue Oct 27 07:31:53 2015 -0500
  
      net: Make synchronize_rcu_expedited() conditional on !RT_FULL

However, as noted by Michael, making rcu_normal=1 default in the
RT kernel should have the same effect (ie.  not calling
synchronize_sched_expedited()).

So, honest question, is there a reason not to:

 1. Drop the patch above
 2. Make rcu_normal=1 default?

Re: Making rcu_normal=1 in RT

[Julia Cartwright]

On Wed, Oct 12, 2016 at 11:12:51AM -0400, Luiz Capitulino wrote:
> Hi,
> 
> We have the following patch applied to the RT tree:
> 
>   commit a9d3cc781a3306bfa332fa7cb6134b70696058d5
>   Author: Josh Cartwright <joshc@ni.com>
>   Date:   Tue Oct 27 07:31:53 2015 -0500
>   
>       net: Make synchronize_rcu_expedited() conditional on !RT_FULL
> 
> However, as noted by Michael, making rcu_normal=1 default in the
> RT kernel should have the same effect (ie.  not calling
> synchronize_sched_expedited()).
> 
> So, honest question, is there a reason not to:
> 
>  1. Drop the patch above
>  2. Make rcu_normal=1 default?

I think this is probably a cleaner way to fix the problems which
motivated this patch in the first place.  In my defense, the above patch
predates rcu_normal :).

Something like this, perhaps?

   Julia

-- 8< --
Subject: [PATCH] rcu: enable rcu_normal_after_boot by default for RT

The forcing of an expedited grace period is an expensive and very
RT-application unfriendly operation, as it forcibly preempts all running
tasks on CPUs which are preventing the gp from expiring.

By default, as a policy decision, disable the expediting of grace
periods (after boot) on configurations which enable PREEMPT_RT_FULL.

Suggested-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Julia Cartwright <julia@ni.com>
---
 kernel/rcu/update.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/rcu/update.c b/kernel/rcu/update.c
index b40d346..4975917 100644
--- a/kernel/rcu/update.c
+++ b/kernel/rcu/update.c
@@ -63,7 +63,7 @@ MODULE_ALIAS("rcupdate");
 #ifndef CONFIG_TINY_RCU
 module_param(rcu_expedited, int, 0);
 module_param(rcu_normal, int, 0);
-static int rcu_normal_after_boot;
+static int rcu_normal_after_boot = IS_ENABLED(CONFIG_PREEMPT_RT_FULL);
 module_param(rcu_normal_after_boot, int, 0);
 #endif /* #ifndef CONFIG_TINY_RCU */
 
-- 
2.9.3

Re: Making rcu_normal=1 in RT

[Paul E. McKenney]

On Wed, Oct 12, 2016 at 11:21:14AM -0500, Julia Cartwright wrote:
> On Wed, Oct 12, 2016 at 11:12:51AM -0400, Luiz Capitulino wrote:
> > Hi,
> > 
> > We have the following patch applied to the RT tree:
> > 
> >   commit a9d3cc781a3306bfa332fa7cb6134b70696058d5
> >   Author: Josh Cartwright <joshc@ni.com>
> >   Date:   Tue Oct 27 07:31:53 2015 -0500
> >   
> >       net: Make synchronize_rcu_expedited() conditional on !RT_FULL
> > 
> > However, as noted by Michael, making rcu_normal=1 default in the
> > RT kernel should have the same effect (ie.  not calling
> > synchronize_sched_expedited()).
> > 
> > So, honest question, is there a reason not to:
> > 
> >  1. Drop the patch above
> >  2. Make rcu_normal=1 default?
> 
> I think this is probably a cleaner way to fix the problems which
> motivated this patch in the first place.  In my defense, the above patch
> predates rcu_normal :).
> 
> Something like this, perhaps?
> 
>    Julia
> 
> -- 8< --
> Subject: [PATCH] rcu: enable rcu_normal_after_boot by default for RT
> 
> The forcing of an expedited grace period is an expensive and very
> RT-application unfriendly operation, as it forcibly preempts all running
> tasks on CPUs which are preventing the gp from expiring.
> 
> By default, as a policy decision, disable the expediting of grace
> periods (after boot) on configurations which enable PREEMPT_RT_FULL.
> 
> Suggested-by: Luiz Capitulino <lcapitulino@redhat.com>
> Signed-off-by: Julia Cartwright <julia@ni.com>

Looks like a reasonable approach to me.  Objections?

							Thanx, Paul

> ---
>  kernel/rcu/update.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/kernel/rcu/update.c b/kernel/rcu/update.c
> index b40d346..4975917 100644
> --- a/kernel/rcu/update.c
> +++ b/kernel/rcu/update.c
> @@ -63,7 +63,7 @@ MODULE_ALIAS("rcupdate");
>  #ifndef CONFIG_TINY_RCU
>  module_param(rcu_expedited, int, 0);
>  module_param(rcu_normal, int, 0);
> -static int rcu_normal_after_boot;
> +static int rcu_normal_after_boot = IS_ENABLED(CONFIG_PREEMPT_RT_FULL);
>  module_param(rcu_normal_after_boot, int, 0);
>  #endif /* #ifndef CONFIG_TINY_RCU */
> 
> -- 
> 2.9.3
> 

Re: Making rcu_normal=1 in RT

[Luiz Capitulino]

On Wed, 12 Oct 2016 11:21:14 -0500
Julia Cartwright <julia@ni.com> wrote:

> On Wed, Oct 12, 2016 at 11:12:51AM -0400, Luiz Capitulino wrote:
> > Hi,
> > 
> > We have the following patch applied to the RT tree:
> > 
> >   commit a9d3cc781a3306bfa332fa7cb6134b70696058d5
> >   Author: Josh Cartwright <joshc@ni.com>
> >   Date:   Tue Oct 27 07:31:53 2015 -0500
> >   
> >       net: Make synchronize_rcu_expedited() conditional on !RT_FULL
> > 
> > However, as noted by Michael, making rcu_normal=1 default in the
> > RT kernel should have the same effect (ie.  not calling
> > synchronize_sched_expedited()).
> > 
> > So, honest question, is there a reason not to:
> > 
> >  1. Drop the patch above
> >  2. Make rcu_normal=1 default?  
> 
> I think this is probably a cleaner way to fix the problems which
> motivated this patch in the first place.  In my defense, the above patch
> predates rcu_normal :).

No need to defend yourself! We debugged this very spike in one of
our kernels that don't have rcu_normal. We decided to do exactly
what you're doing before looking at upstream. Your patch helped
us confirm that we were in the right track.

> Something like this, perhaps?

Looks good, but (honest question) what does it buy us using
rcu_normal_after_boot vs rcu_normal? Is the boot process
improved someway?

As long as we're rcu_normal=1 before launching user-space,
this should be fine.

> 
>    Julia
> 
> -- 8< --
> Subject: [PATCH] rcu: enable rcu_normal_after_boot by default for RT
> 
> The forcing of an expedited grace period is an expensive and very
> RT-application unfriendly operation, as it forcibly preempts all running
> tasks on CPUs which are preventing the gp from expiring.
> 
> By default, as a policy decision, disable the expediting of grace
> periods (after boot) on configurations which enable PREEMPT_RT_FULL.
> 
> Suggested-by: Luiz Capitulino <lcapitulino@redhat.com>
> Signed-off-by: Julia Cartwright <julia@ni.com>
> ---
>  kernel/rcu/update.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/kernel/rcu/update.c b/kernel/rcu/update.c
> index b40d346..4975917 100644
> --- a/kernel/rcu/update.c
> +++ b/kernel/rcu/update.c
> @@ -63,7 +63,7 @@ MODULE_ALIAS("rcupdate");
>  #ifndef CONFIG_TINY_RCU
>  module_param(rcu_expedited, int, 0);
>  module_param(rcu_normal, int, 0);
> -static int rcu_normal_after_boot;
> +static int rcu_normal_after_boot = IS_ENABLED(CONFIG_PREEMPT_RT_FULL);
>  module_param(rcu_normal_after_boot, int, 0);
>  #endif /* #ifndef CONFIG_TINY_RCU */
>  

Re: Making rcu_normal=1 in RT

[Julia Cartwright]

On Wed, Oct 12, 2016 at 12:49:56PM -0400, Luiz Capitulino wrote:
> On Wed, 12 Oct 2016 11:21:14 -0500
> Julia Cartwright <julia@ni.com> wrote:
> 
> > On Wed, Oct 12, 2016 at 11:12:51AM -0400, Luiz Capitulino wrote:
> > > Hi,
> > > 
> > > We have the following patch applied to the RT tree:
> > > 
> > >   commit a9d3cc781a3306bfa332fa7cb6134b70696058d5
> > >   Author: Josh Cartwright <joshc@ni.com>
> > >   Date:   Tue Oct 27 07:31:53 2015 -0500
> > >   
> > >       net: Make synchronize_rcu_expedited() conditional on !RT_FULL
> > > 
> > > However, as noted by Michael, making rcu_normal=1 default in the
> > > RT kernel should have the same effect (ie.  not calling
> > > synchronize_sched_expedited()).
> > > 
> > > So, honest question, is there a reason not to:
> > > 
> > >  1. Drop the patch above
> > >  2. Make rcu_normal=1 default?  
> > 
> > I think this is probably a cleaner way to fix the problems which
> > motivated this patch in the first place.  In my defense, the above patch
> > predates rcu_normal :).
> 
> No need to defend yourself! We debugged this very spike in one of
> our kernels that don't have rcu_normal. We decided to do exactly
> what you're doing before looking at upstream. Your patch helped
> us confirm that we were in the right track.

Great!  Glad I could help in some way!

> > Something like this, perhaps?
>
> Looks good, but (honest question) what does it buy us using
> rcu_normal_after_boot vs rcu_normal? Is the boot process
> improved someway?

That's the idea, although I don't have data to show much it actually
buys us.

> As long as we're rcu_normal=1 before launching user-space,
> this should be fine.

Agreed.

Thanks,
   Julia

Re: Making rcu_normal=1 in RT

[Paul E. McKenney]

On Wed, Oct 12, 2016 at 12:15:53PM -0500, Julia Cartwright wrote:
> On Wed, Oct 12, 2016 at 12:49:56PM -0400, Luiz Capitulino wrote:
> > On Wed, 12 Oct 2016 11:21:14 -0500
> > Julia Cartwright <julia@ni.com> wrote:
> > 
> > > On Wed, Oct 12, 2016 at 11:12:51AM -0400, Luiz Capitulino wrote:
> > > > Hi,
> > > > 
> > > > We have the following patch applied to the RT tree:
> > > > 
> > > >   commit a9d3cc781a3306bfa332fa7cb6134b70696058d5
> > > >   Author: Josh Cartwright <joshc@ni.com>
> > > >   Date:   Tue Oct 27 07:31:53 2015 -0500
> > > >   
> > > >       net: Make synchronize_rcu_expedited() conditional on !RT_FULL
> > > > 
> > > > However, as noted by Michael, making rcu_normal=1 default in the
> > > > RT kernel should have the same effect (ie.  not calling
> > > > synchronize_sched_expedited()).
> > > > 
> > > > So, honest question, is there a reason not to:
> > > > 
> > > >  1. Drop the patch above
> > > >  2. Make rcu_normal=1 default?  
> > > 
> > > I think this is probably a cleaner way to fix the problems which
> > > motivated this patch in the first place.  In my defense, the above patch
> > > predates rcu_normal :).
> > 
> > No need to defend yourself! We debugged this very spike in one of
> > our kernels that don't have rcu_normal. We decided to do exactly
> > what you're doing before looking at upstream. Your patch helped
> > us confirm that we were in the right track.
> 
> Great!  Glad I could help in some way!
> 
> > > Something like this, perhaps?
> >
> > Looks good, but (honest question) what does it buy us using
> > rcu_normal_after_boot vs rcu_normal? Is the boot process
> > improved someway?
> 
> That's the idea, although I don't have data to show much it actually
> buys us.

It means that grace periods can be expedited during boot.  If you really
care about boot speed, you can also set rcu_expedited=1 and also
rcu_normal_after_boot=1, which will expedite all grace periods during
the boot process, but stop doing so just before spawning init.
After that point, any attempt to do an expedited grace period gets you
a normal grace period instead.

So you get fast boot and then clean realtime.

> > As long as we're rcu_normal=1 before launching user-space,
> > this should be fine.
> 
> Agreed.

Yes, you can also set them manually instead of at boot, if you wish.

							Thanx, Paul

Re: Making rcu_normal=1 in RT

[Michael S. Tsirkin]

On Wed, Oct 12, 2016 at 01:32:23PM -0700, Paul E. McKenney wrote:
> On Wed, Oct 12, 2016 at 12:15:53PM -0500, Julia Cartwright wrote:
> > On Wed, Oct 12, 2016 at 12:49:56PM -0400, Luiz Capitulino wrote:
> > > On Wed, 12 Oct 2016 11:21:14 -0500
> > > Julia Cartwright <julia@ni.com> wrote:
> > > 
> > > > On Wed, Oct 12, 2016 at 11:12:51AM -0400, Luiz Capitulino wrote:
> > > > > Hi,
> > > > > 
> > > > > We have the following patch applied to the RT tree:
> > > > > 
> > > > >   commit a9d3cc781a3306bfa332fa7cb6134b70696058d5
> > > > >   Author: Josh Cartwright <joshc@ni.com>
> > > > >   Date:   Tue Oct 27 07:31:53 2015 -0500
> > > > >   
> > > > >       net: Make synchronize_rcu_expedited() conditional on !RT_FULL
> > > > > 
> > > > > However, as noted by Michael, making rcu_normal=1 default in the
> > > > > RT kernel should have the same effect (ie.  not calling
> > > > > synchronize_sched_expedited()).
> > > > > 
> > > > > So, honest question, is there a reason not to:
> > > > > 
> > > > >  1. Drop the patch above
> > > > >  2. Make rcu_normal=1 default?  
> > > > 
> > > > I think this is probably a cleaner way to fix the problems which
> > > > motivated this patch in the first place.  In my defense, the above patch
> > > > predates rcu_normal :).
> > > 
> > > No need to defend yourself! We debugged this very spike in one of
> > > our kernels that don't have rcu_normal. We decided to do exactly
> > > what you're doing before looking at upstream. Your patch helped
> > > us confirm that we were in the right track.
> > 
> > Great!  Glad I could help in some way!
> > 
> > > > Something like this, perhaps?
> > >
> > > Looks good, but (honest question) what does it buy us using
> > > rcu_normal_after_boot vs rcu_normal? Is the boot process
> > > improved someway?
> > 
> > That's the idea, although I don't have data to show much it actually
> > buys us.
> 
> It means that grace periods can be expedited during boot.  If you really
> care about boot speed, you can also set rcu_expedited=1 and also
> rcu_normal_after_boot=1, which will expedite all grace periods during
> the boot process, but stop doing so just before spawning init.
> After that point, any attempt to do an expedited grace period gets you
> a normal grace period instead.
> 
> So you get fast boot and then clean realtime.
> 
> > > As long as we're rcu_normal=1 before launching user-space,
> > > this should be fine.
> > 
> > Agreed.
> 
> Yes, you can also set them manually instead of at boot, if you wish.
> 
> 							Thanx, Paul

FWIW

Acked-by: Michael S. Tsirkin <mst@redhat.com>

But I have a question - here's the commit that started
it all:


commit be3fc413da9eb17cce0991f214ab019d16c88c41
Author: Eric Dumazet <eric.dumazet@gmail.com>
Date:   Mon May 23 23:07:32 2011 +0000

    net: use synchronize_rcu_expedited()
    
    synchronize_rcu() is very slow in various situations (HZ=100,
    CONFIG_NO_HZ=y, CONFIG_PREEMPT=n)
    
    Extract from my (mostly idle) 8 core machine :
    
     synchronize_rcu() in 99985 us
     synchronize_rcu() in 79982 us
     synchronize_rcu() in 87612 us
     synchronize_rcu() in 79827 us
     synchronize_rcu() in 109860 us
     synchronize_rcu() in 98039 us
     synchronize_rcu() in 89841 us
     synchronize_rcu() in 79842 us
     synchronize_rcu() in 80151 us
     synchronize_rcu() in 119833 us
     synchronize_rcu() in 99858 us
     synchronize_rcu() in 73999 us
     synchronize_rcu() in 79855 us
     synchronize_rcu() in 79853 us
    
    When we hold RTNL mutex, we would like to spend some cpu cycles but not
    block too long other processes waiting for this mutex.
    
    We also want to setup/dismantle network features as fast as possible at
    boot/shutdown time.


To make sure this does not regress for RT,
how about clearing this flag on shutdown as well?



-- 
MST

Re: Making rcu_normal=1 in RT

[Paul E. McKenney]

On Thu, Oct 13, 2016 at 07:25:56PM +0300, Michael S. Tsirkin wrote:
> On Wed, Oct 12, 2016 at 01:32:23PM -0700, Paul E. McKenney wrote:
> > On Wed, Oct 12, 2016 at 12:15:53PM -0500, Julia Cartwright wrote:
> > > On Wed, Oct 12, 2016 at 12:49:56PM -0400, Luiz Capitulino wrote:
> > > > On Wed, 12 Oct 2016 11:21:14 -0500
> > > > Julia Cartwright <julia@ni.com> wrote:
> > > > 
> > > > > On Wed, Oct 12, 2016 at 11:12:51AM -0400, Luiz Capitulino wrote:
> > > > > > Hi,
> > > > > > 
> > > > > > We have the following patch applied to the RT tree:
> > > > > > 
> > > > > >   commit a9d3cc781a3306bfa332fa7cb6134b70696058d5
> > > > > >   Author: Josh Cartwright <joshc@ni.com>
> > > > > >   Date:   Tue Oct 27 07:31:53 2015 -0500
> > > > > >   
> > > > > >       net: Make synchronize_rcu_expedited() conditional on !RT_FULL
> > > > > > 
> > > > > > However, as noted by Michael, making rcu_normal=1 default in the
> > > > > > RT kernel should have the same effect (ie.  not calling
> > > > > > synchronize_sched_expedited()).
> > > > > > 
> > > > > > So, honest question, is there a reason not to:
> > > > > > 
> > > > > >  1. Drop the patch above
> > > > > >  2. Make rcu_normal=1 default?  
> > > > > 
> > > > > I think this is probably a cleaner way to fix the problems which
> > > > > motivated this patch in the first place.  In my defense, the above patch
> > > > > predates rcu_normal :).
> > > > 
> > > > No need to defend yourself! We debugged this very spike in one of
> > > > our kernels that don't have rcu_normal. We decided to do exactly
> > > > what you're doing before looking at upstream. Your patch helped
> > > > us confirm that we were in the right track.
> > > 
> > > Great!  Glad I could help in some way!
> > > 
> > > > > Something like this, perhaps?
> > > >
> > > > Looks good, but (honest question) what does it buy us using
> > > > rcu_normal_after_boot vs rcu_normal? Is the boot process
> > > > improved someway?
> > > 
> > > That's the idea, although I don't have data to show much it actually
> > > buys us.
> > 
> > It means that grace periods can be expedited during boot.  If you really
> > care about boot speed, you can also set rcu_expedited=1 and also
> > rcu_normal_after_boot=1, which will expedite all grace periods during
> > the boot process, but stop doing so just before spawning init.
> > After that point, any attempt to do an expedited grace period gets you
> > a normal grace period instead.
> > 
> > So you get fast boot and then clean realtime.
> > 
> > > > As long as we're rcu_normal=1 before launching user-space,
> > > > this should be fine.
> > > 
> > > Agreed.
> > 
> > Yes, you can also set them manually instead of at boot, if you wish.
> > 
> > 							Thanx, Paul
> 
> FWIW
> 
> Acked-by: Michael S. Tsirkin <mst@redhat.com>
> 
> But I have a question - here's the commit that started
> it all:
> 
> 
> commit be3fc413da9eb17cce0991f214ab019d16c88c41
> Author: Eric Dumazet <eric.dumazet@gmail.com>
> Date:   Mon May 23 23:07:32 2011 +0000
> 
>     net: use synchronize_rcu_expedited()
>     
>     synchronize_rcu() is very slow in various situations (HZ=100,
>     CONFIG_NO_HZ=y, CONFIG_PREEMPT=n)
>     
>     Extract from my (mostly idle) 8 core machine :
>     
>      synchronize_rcu() in 99985 us
>      synchronize_rcu() in 79982 us
>      synchronize_rcu() in 87612 us
>      synchronize_rcu() in 79827 us
>      synchronize_rcu() in 109860 us
>      synchronize_rcu() in 98039 us
>      synchronize_rcu() in 89841 us
>      synchronize_rcu() in 79842 us
>      synchronize_rcu() in 80151 us
>      synchronize_rcu() in 119833 us
>      synchronize_rcu() in 99858 us
>      synchronize_rcu() in 73999 us
>      synchronize_rcu() in 79855 us
>      synchronize_rcu() in 79853 us
>     
>     When we hold RTNL mutex, we would like to spend some cpu cycles but not
>     block too long other processes waiting for this mutex.
>     
>     We also want to setup/dismantle network features as fast as possible at
>     boot/shutdown time.
> 
> 
> To make sure this does not regress for RT,
> how about clearing this flag on shutdown as well?

By that, you mean having some way to force all grace periods to be
expedited during shutdown?  Or am I missing your point?

							Thanx, Paul

Re: Making rcu_normal=1 in RT

[Michael S. Tsirkin]

On Fri, Oct 14, 2016 at 02:20:50AM -0700, Paul E. McKenney wrote:
> On Thu, Oct 13, 2016 at 07:25:56PM +0300, Michael S. Tsirkin wrote:
> > On Wed, Oct 12, 2016 at 01:32:23PM -0700, Paul E. McKenney wrote:
> > > On Wed, Oct 12, 2016 at 12:15:53PM -0500, Julia Cartwright wrote:
> > > > On Wed, Oct 12, 2016 at 12:49:56PM -0400, Luiz Capitulino wrote:
> > > > > On Wed, 12 Oct 2016 11:21:14 -0500
> > > > > Julia Cartwright <julia@ni.com> wrote:
> > > > > 
> > > > > > On Wed, Oct 12, 2016 at 11:12:51AM -0400, Luiz Capitulino wrote:
> > > > > > > Hi,
> > > > > > > 
> > > > > > > We have the following patch applied to the RT tree:
> > > > > > > 
> > > > > > >   commit a9d3cc781a3306bfa332fa7cb6134b70696058d5
> > > > > > >   Author: Josh Cartwright <joshc@ni.com>
> > > > > > >   Date:   Tue Oct 27 07:31:53 2015 -0500
> > > > > > >   
> > > > > > >       net: Make synchronize_rcu_expedited() conditional on !RT_FULL
> > > > > > > 
> > > > > > > However, as noted by Michael, making rcu_normal=1 default in the
> > > > > > > RT kernel should have the same effect (ie.  not calling
> > > > > > > synchronize_sched_expedited()).
> > > > > > > 
> > > > > > > So, honest question, is there a reason not to:
> > > > > > > 
> > > > > > >  1. Drop the patch above
> > > > > > >  2. Make rcu_normal=1 default?  
> > > > > > 
> > > > > > I think this is probably a cleaner way to fix the problems which
> > > > > > motivated this patch in the first place.  In my defense, the above patch
> > > > > > predates rcu_normal :).
> > > > > 
> > > > > No need to defend yourself! We debugged this very spike in one of
> > > > > our kernels that don't have rcu_normal. We decided to do exactly
> > > > > what you're doing before looking at upstream. Your patch helped
> > > > > us confirm that we were in the right track.
> > > > 
> > > > Great!  Glad I could help in some way!
> > > > 
> > > > > > Something like this, perhaps?
> > > > >
> > > > > Looks good, but (honest question) what does it buy us using
> > > > > rcu_normal_after_boot vs rcu_normal? Is the boot process
> > > > > improved someway?
> > > > 
> > > > That's the idea, although I don't have data to show much it actually
> > > > buys us.
> > > 
> > > It means that grace periods can be expedited during boot.  If you really
> > > care about boot speed, you can also set rcu_expedited=1 and also
> > > rcu_normal_after_boot=1, which will expedite all grace periods during
> > > the boot process, but stop doing so just before spawning init.
> > > After that point, any attempt to do an expedited grace period gets you
> > > a normal grace period instead.
> > > 
> > > So you get fast boot and then clean realtime.
> > > 
> > > > > As long as we're rcu_normal=1 before launching user-space,
> > > > > this should be fine.
> > > > 
> > > > Agreed.
> > > 
> > > Yes, you can also set them manually instead of at boot, if you wish.
> > > 
> > > 							Thanx, Paul
> > 
> > FWIW
> > 
> > Acked-by: Michael S. Tsirkin <mst@redhat.com>
> > 
> > But I have a question - here's the commit that started
> > it all:
> > 
> > 
> > commit be3fc413da9eb17cce0991f214ab019d16c88c41
> > Author: Eric Dumazet <eric.dumazet@gmail.com>
> > Date:   Mon May 23 23:07:32 2011 +0000
> > 
> >     net: use synchronize_rcu_expedited()
> >     
> >     synchronize_rcu() is very slow in various situations (HZ=100,
> >     CONFIG_NO_HZ=y, CONFIG_PREEMPT=n)
> >     
> >     Extract from my (mostly idle) 8 core machine :
> >     
> >      synchronize_rcu() in 99985 us
> >      synchronize_rcu() in 79982 us
> >      synchronize_rcu() in 87612 us
> >      synchronize_rcu() in 79827 us
> >      synchronize_rcu() in 109860 us
> >      synchronize_rcu() in 98039 us
> >      synchronize_rcu() in 89841 us
> >      synchronize_rcu() in 79842 us
> >      synchronize_rcu() in 80151 us
> >      synchronize_rcu() in 119833 us
> >      synchronize_rcu() in 99858 us
> >      synchronize_rcu() in 73999 us
> >      synchronize_rcu() in 79855 us
> >      synchronize_rcu() in 79853 us
> >     
> >     When we hold RTNL mutex, we would like to spend some cpu cycles but not
> >     block too long other processes waiting for this mutex.
> >     
> >     We also want to setup/dismantle network features as fast as possible at
> >     boot/shutdown time.
> > 
> > 
> > To make sure this does not regress for RT,
> > how about clearing this flag on shutdown as well?
> 
> By that, you mean having some way to force all grace periods to be
> expedited during shutdown?  Or am I missing your point?
> 
> 							Thanx, Paul

Exactly. And maybe kexec.

-- 
MST

Re: Making rcu_normal=1 in RT

[Paul E. McKenney]

On Sun, Oct 16, 2016 at 04:45:32AM +0300, Michael S. Tsirkin wrote:
> On Fri, Oct 14, 2016 at 02:20:50AM -0700, Paul E. McKenney wrote:
> > On Thu, Oct 13, 2016 at 07:25:56PM +0300, Michael S. Tsirkin wrote:
> > > On Wed, Oct 12, 2016 at 01:32:23PM -0700, Paul E. McKenney wrote:
> > > > On Wed, Oct 12, 2016 at 12:15:53PM -0500, Julia Cartwright wrote:
> > > > > On Wed, Oct 12, 2016 at 12:49:56PM -0400, Luiz Capitulino wrote:
> > > > > > On Wed, 12 Oct 2016 11:21:14 -0500
> > > > > > Julia Cartwright <julia@ni.com> wrote:
> > > > > > 
> > > > > > > On Wed, Oct 12, 2016 at 11:12:51AM -0400, Luiz Capitulino wrote:
> > > > > > > > Hi,
> > > > > > > > 
> > > > > > > > We have the following patch applied to the RT tree:
> > > > > > > > 
> > > > > > > >   commit a9d3cc781a3306bfa332fa7cb6134b70696058d5
> > > > > > > >   Author: Josh Cartwright <joshc@ni.com>
> > > > > > > >   Date:   Tue Oct 27 07:31:53 2015 -0500
> > > > > > > >   
> > > > > > > >       net: Make synchronize_rcu_expedited() conditional on !RT_FULL
> > > > > > > > 
> > > > > > > > However, as noted by Michael, making rcu_normal=1 default in the
> > > > > > > > RT kernel should have the same effect (ie.  not calling
> > > > > > > > synchronize_sched_expedited()).
> > > > > > > > 
> > > > > > > > So, honest question, is there a reason not to:
> > > > > > > > 
> > > > > > > >  1. Drop the patch above
> > > > > > > >  2. Make rcu_normal=1 default?  
> > > > > > > 
> > > > > > > I think this is probably a cleaner way to fix the problems which
> > > > > > > motivated this patch in the first place.  In my defense, the above patch
> > > > > > > predates rcu_normal :).
> > > > > > 
> > > > > > No need to defend yourself! We debugged this very spike in one of
> > > > > > our kernels that don't have rcu_normal. We decided to do exactly
> > > > > > what you're doing before looking at upstream. Your patch helped
> > > > > > us confirm that we were in the right track.
> > > > > 
> > > > > Great!  Glad I could help in some way!
> > > > > 
> > > > > > > Something like this, perhaps?
> > > > > >
> > > > > > Looks good, but (honest question) what does it buy us using
> > > > > > rcu_normal_after_boot vs rcu_normal? Is the boot process
> > > > > > improved someway?
> > > > > 
> > > > > That's the idea, although I don't have data to show much it actually
> > > > > buys us.
> > > > 
> > > > It means that grace periods can be expedited during boot.  If you really
> > > > care about boot speed, you can also set rcu_expedited=1 and also
> > > > rcu_normal_after_boot=1, which will expedite all grace periods during
> > > > the boot process, but stop doing so just before spawning init.
> > > > After that point, any attempt to do an expedited grace period gets you
> > > > a normal grace period instead.
> > > > 
> > > > So you get fast boot and then clean realtime.
> > > > 
> > > > > > As long as we're rcu_normal=1 before launching user-space,
> > > > > > this should be fine.
> > > > > 
> > > > > Agreed.
> > > > 
> > > > Yes, you can also set them manually instead of at boot, if you wish.
> > > > 
> > > > 							Thanx, Paul
> > > 
> > > FWIW
> > > 
> > > Acked-by: Michael S. Tsirkin <mst@redhat.com>
> > > 
> > > But I have a question - here's the commit that started
> > > it all:
> > > 
> > > 
> > > commit be3fc413da9eb17cce0991f214ab019d16c88c41
> > > Author: Eric Dumazet <eric.dumazet@gmail.com>
> > > Date:   Mon May 23 23:07:32 2011 +0000
> > > 
> > >     net: use synchronize_rcu_expedited()
> > >     
> > >     synchronize_rcu() is very slow in various situations (HZ=100,
> > >     CONFIG_NO_HZ=y, CONFIG_PREEMPT=n)
> > >     
> > >     Extract from my (mostly idle) 8 core machine :
> > >     
> > >      synchronize_rcu() in 99985 us
> > >      synchronize_rcu() in 79982 us
> > >      synchronize_rcu() in 87612 us
> > >      synchronize_rcu() in 79827 us
> > >      synchronize_rcu() in 109860 us
> > >      synchronize_rcu() in 98039 us
> > >      synchronize_rcu() in 89841 us
> > >      synchronize_rcu() in 79842 us
> > >      synchronize_rcu() in 80151 us
> > >      synchronize_rcu() in 119833 us
> > >      synchronize_rcu() in 99858 us
> > >      synchronize_rcu() in 73999 us
> > >      synchronize_rcu() in 79855 us
> > >      synchronize_rcu() in 79853 us
> > >     
> > >     When we hold RTNL mutex, we would like to spend some cpu cycles but not
> > >     block too long other processes waiting for this mutex.
> > >     
> > >     We also want to setup/dismantle network features as fast as possible at
> > >     boot/shutdown time.
> > > 
> > > 
> > > To make sure this does not regress for RT,
> > > how about clearing this flag on shutdown as well?
> > 
> > By that, you mean having some way to force all grace periods to be
> > expedited during shutdown?  Or am I missing your point?
> > 
> > 							Thanx, Paul
> 
> Exactly. And maybe kexec.

If the relevant maintainers are OK with that, I am OK with it as long
as it is non-default (at least to begin with) and does not introduce
additional Kconfig questions.  My guess is that a boot parameter would
work best, but something to discuss.

							Thanx, Paul

Re: Making rcu_normal=1 in RT

[Sebastian Andrzej Siewior]

On 2016-10-16 04:28:46 [-0700], Paul E. McKenney wrote:
> If the relevant maintainers are OK with that, I am OK with it as long
> as it is non-default (at least to begin with) and does not introduce
> additional Kconfig questions.  My guess is that a boot parameter would
> work best, but something to discuss.

Okay. For me to summary:
- we want rcu_normal_after_boot=1 on -RT via CONFIG_PREEMPT_RT_FULL

- this makes synchronize_rcu_expedited() behave like
  synchronize_rcu() and therefore I can drop all patches replacing
  synchronize_rcu_expedited() with synchronize_rcu().

- optionally it has been requested to make synchronize_rcu() behave like
  synchronize_rcu_expedited() on shutdown and kexec().

Did I miss understood / forgot something?
> 							Thanx, Paul

Sebastian

Re: Making rcu_normal=1 in RT

[Paul E. McKenney]

On Mon, Oct 31, 2016 at 06:38:52PM +0100, Sebastian Andrzej Siewior wrote:
> On 2016-10-16 04:28:46 [-0700], Paul E. McKenney wrote:
> > If the relevant maintainers are OK with that, I am OK with it as long
> > as it is non-default (at least to begin with) and does not introduce
> > additional Kconfig questions.  My guess is that a boot parameter would
> > work best, but something to discuss.
> 
> Okay. For me to summary:
> - we want rcu_normal_after_boot=1 on -RT via CONFIG_PREEMPT_RT_FULL

That would be good.

> - this makes synchronize_rcu_expedited() behave like
>   synchronize_rcu() and therefore I can drop all patches replacing
>   synchronize_rcu_expedited() with synchronize_rcu().

And this would be a benefit.  ;-)

> - optionally it has been requested to make synchronize_rcu() behave like
>   synchronize_rcu_expedited() on shutdown and kexec().

You can invoke rcu_unexpedite_gp() to force all subsequennt grace periods
to be expedited, but you do need to clear rcu_normal for this to have
effect.  Right now, that means "WRITE_ONCE(rcu_normal, 0)", but I could
easily supply a formal API if you would prefer.  Which you probably
would given  that TINY_RCU doesn't have rcu_normal...

> Did I miss understood / forgot something?

It would not hurt to boot with rcu_expedited if boot speed is critical,
but I don't know whether or not this should be enabled by default.

							Thanx, Paul

> Sebastian
> 

Re: Making rcu_normal=1 in RT

[Michael S. Tsirkin]

On Mon, Oct 31, 2016 at 11:15:43AM -0700, Paul E. McKenney wrote:
> On Mon, Oct 31, 2016 at 06:38:52PM +0100, Sebastian Andrzej Siewior wrote:
> > On 2016-10-16 04:28:46 [-0700], Paul E. McKenney wrote:
> > > If the relevant maintainers are OK with that, I am OK with it as long
> > > as it is non-default (at least to begin with) and does not introduce
> > > additional Kconfig questions.  My guess is that a boot parameter would
> > > work best, but something to discuss.
> > 
> > Okay. For me to summary:
> > - we want rcu_normal_after_boot=1 on -RT via CONFIG_PREEMPT_RT_FULL
> 
> That would be good.
> 
> > - this makes synchronize_rcu_expedited() behave like
> >   synchronize_rcu() and therefore I can drop all patches replacing
> >   synchronize_rcu_expedited() with synchronize_rcu().
> 
> And this would be a benefit.  ;-)
> 
> > - optionally it has been requested to make synchronize_rcu() behave like
> >   synchronize_rcu_expedited() on shutdown and kexec().
> 
> You can invoke rcu_unexpedite_gp() to force all subsequennt grace periods
> to be expedited, but you do need to clear rcu_normal for this to have
> effect.  Right now, that means "WRITE_ONCE(rcu_normal, 0)", but I could
> easily supply a formal API if you would prefer.  Which you probably
> would given  that TINY_RCU doesn't have rcu_normal...
> 
> > Did I miss understood / forgot something?
> 
> It would not hurt to boot with rcu_expedited if boot speed is critical,
> but I don't know whether or not this should be enabled by default.
> 
> 							Thanx, Paul

I don't know either but I'd like to know ATM it's expedited
by default.


> > Sebastian
> > 

Re: Making rcu_normal=1 in RT

[Paul E. McKenney]

On Tue, Nov 01, 2016 at 12:37:04AM +0200, Michael S. Tsirkin wrote:
> On Mon, Oct 31, 2016 at 11:15:43AM -0700, Paul E. McKenney wrote:
> > On Mon, Oct 31, 2016 at 06:38:52PM +0100, Sebastian Andrzej Siewior wrote:
> > > On 2016-10-16 04:28:46 [-0700], Paul E. McKenney wrote:
> > > > If the relevant maintainers are OK with that, I am OK with it as long
> > > > as it is non-default (at least to begin with) and does not introduce
> > > > additional Kconfig questions.  My guess is that a boot parameter would
> > > > work best, but something to discuss.
> > > 
> > > Okay. For me to summary:
> > > - we want rcu_normal_after_boot=1 on -RT via CONFIG_PREEMPT_RT_FULL
> > 
> > That would be good.
> > 
> > > - this makes synchronize_rcu_expedited() behave like
> > >   synchronize_rcu() and therefore I can drop all patches replacing
> > >   synchronize_rcu_expedited() with synchronize_rcu().
> > 
> > And this would be a benefit.  ;-)
> > 
> > > - optionally it has been requested to make synchronize_rcu() behave like
> > >   synchronize_rcu_expedited() on shutdown and kexec().
> > 
> > You can invoke rcu_unexpedite_gp() to force all subsequennt grace periods
> > to be expedited, but you do need to clear rcu_normal for this to have
> > effect.  Right now, that means "WRITE_ONCE(rcu_normal, 0)", but I could
> > easily supply a formal API if you would prefer.  Which you probably
> > would given  that TINY_RCU doesn't have rcu_normal...
> > 
> > > Did I miss understood / forgot something?
> > 
> > It would not hurt to boot with rcu_expedited if boot speed is critical,
> > but I don't know whether or not this should be enabled by default.
> > 
> > 							Thanx, Paul
> 
> I don't know either but I'd like to know ATM it's expedited
> by default.

In current mainline, no.  That is, rcu_expedited=0 by default.

Or am I missing the point of your question?

							Thanx, Paul

Re: Making rcu_normal=1 in RT

[Michael S. Tsirkin]

On Mon, Oct 31, 2016 at 07:19:41PM -0700, Paul E. McKenney wrote:
> On Tue, Nov 01, 2016 at 12:37:04AM +0200, Michael S. Tsirkin wrote:
> > On Mon, Oct 31, 2016 at 11:15:43AM -0700, Paul E. McKenney wrote:
> > > On Mon, Oct 31, 2016 at 06:38:52PM +0100, Sebastian Andrzej Siewior wrote:
> > > > On 2016-10-16 04:28:46 [-0700], Paul E. McKenney wrote:
> > > > > If the relevant maintainers are OK with that, I am OK with it as long
> > > > > as it is non-default (at least to begin with) and does not introduce
> > > > > additional Kconfig questions.  My guess is that a boot parameter would
> > > > > work best, but something to discuss.
> > > > 
> > > > Okay. For me to summary:
> > > > - we want rcu_normal_after_boot=1 on -RT via CONFIG_PREEMPT_RT_FULL
> > > 
> > > That would be good.
> > > 
> > > > - this makes synchronize_rcu_expedited() behave like
> > > >   synchronize_rcu() and therefore I can drop all patches replacing
> > > >   synchronize_rcu_expedited() with synchronize_rcu().
> > > 
> > > And this would be a benefit.  ;-)
> > > 
> > > > - optionally it has been requested to make synchronize_rcu() behave like
> > > >   synchronize_rcu_expedited() on shutdown and kexec().
> > > 
> > > You can invoke rcu_unexpedite_gp() to force all subsequennt grace periods
> > > to be expedited, but you do need to clear rcu_normal for this to have
> > > effect.  Right now, that means "WRITE_ONCE(rcu_normal, 0)", but I could
> > > easily supply a formal API if you would prefer.  Which you probably
> > > would given  that TINY_RCU doesn't have rcu_normal...
> > > 
> > > > Did I miss understood / forgot something?
> > > 
> > > It would not hurt to boot with rcu_expedited if boot speed is critical,
> > > but I don't know whether or not this should be enabled by default.
> > > 
> > > 							Thanx, Paul
> > 
> > I don't know either but I'd like to know ATM it's expedited
> > by default.
> 
> In current mainline, no.  That is, rcu_expedited=0 by default.
> 
> Or am I missing the point of your question?
> 
> 							Thanx, Paul

That's true - what I meant is that adding and removing network devices
happens on boot and calls synchronize_rcu_expedited,
with the commit log explaining that this is done for speeding up boot
and shutdown.


-- 
MST

Re: Making rcu_normal=1 in RT

[Paul E. McKenney]

On Tue, Nov 01, 2016 at 04:36:54AM +0200, Michael S. Tsirkin wrote:
> On Mon, Oct 31, 2016 at 07:19:41PM -0700, Paul E. McKenney wrote:
> > On Tue, Nov 01, 2016 at 12:37:04AM +0200, Michael S. Tsirkin wrote:
> > > On Mon, Oct 31, 2016 at 11:15:43AM -0700, Paul E. McKenney wrote:
> > > > On Mon, Oct 31, 2016 at 06:38:52PM +0100, Sebastian Andrzej Siewior wrote:
> > > > > On 2016-10-16 04:28:46 [-0700], Paul E. McKenney wrote:
> > > > > > If the relevant maintainers are OK with that, I am OK with it as long
> > > > > > as it is non-default (at least to begin with) and does not introduce
> > > > > > additional Kconfig questions.  My guess is that a boot parameter would
> > > > > > work best, but something to discuss.
> > > > > 
> > > > > Okay. For me to summary:
> > > > > - we want rcu_normal_after_boot=1 on -RT via CONFIG_PREEMPT_RT_FULL
> > > > 
> > > > That would be good.
> > > > 
> > > > > - this makes synchronize_rcu_expedited() behave like
> > > > >   synchronize_rcu() and therefore I can drop all patches replacing
> > > > >   synchronize_rcu_expedited() with synchronize_rcu().
> > > > 
> > > > And this would be a benefit.  ;-)
> > > > 
> > > > > - optionally it has been requested to make synchronize_rcu() behave like
> > > > >   synchronize_rcu_expedited() on shutdown and kexec().
> > > > 
> > > > You can invoke rcu_unexpedite_gp() to force all subsequennt grace periods
> > > > to be expedited, but you do need to clear rcu_normal for this to have
> > > > effect.  Right now, that means "WRITE_ONCE(rcu_normal, 0)", but I could
> > > > easily supply a formal API if you would prefer.  Which you probably
> > > > would given  that TINY_RCU doesn't have rcu_normal...
> > > > 
> > > > > Did I miss understood / forgot something?
> > > > 
> > > > It would not hurt to boot with rcu_expedited if boot speed is critical,
> > > > but I don't know whether or not this should be enabled by default.
> > > > 
> > > > 							Thanx, Paul
> > > 
> > > I don't know either but I'd like to know ATM it's expedited
> > > by default.
> > 
> > In current mainline, no.  That is, rcu_expedited=0 by default.
> > 
> > Or am I missing the point of your question?
> > 
> > 							Thanx, Paul
> 
> That's true - what I meant is that adding and removing network devices
> happens on boot and calls synchronize_rcu_expedited,
> with the commit log explaining that this is done for speeding up boot
> and shutdown.

The rcu_normal boot parameter will indeed nullify this optimization.
The boot parameters are normally dumped into dmesg, which should allow
determining when this has happened.  But I do still feel like I am not
fully understanding your concern.

							Thanx, Paul

Re: Making rcu_normal=1 in RT

[Michael S. Tsirkin]

On Mon, Oct 31, 2016 at 07:52:40PM -0700, Paul E. McKenney wrote:
> On Tue, Nov 01, 2016 at 04:36:54AM +0200, Michael S. Tsirkin wrote:
> > On Mon, Oct 31, 2016 at 07:19:41PM -0700, Paul E. McKenney wrote:
> > > On Tue, Nov 01, 2016 at 12:37:04AM +0200, Michael S. Tsirkin wrote:
> > > > On Mon, Oct 31, 2016 at 11:15:43AM -0700, Paul E. McKenney wrote:
> > > > > On Mon, Oct 31, 2016 at 06:38:52PM +0100, Sebastian Andrzej Siewior wrote:
> > > > > > On 2016-10-16 04:28:46 [-0700], Paul E. McKenney wrote:
> > > > > > > If the relevant maintainers are OK with that, I am OK with it as long
> > > > > > > as it is non-default (at least to begin with) and does not introduce
> > > > > > > additional Kconfig questions.  My guess is that a boot parameter would
> > > > > > > work best, but something to discuss.
> > > > > > 
> > > > > > Okay. For me to summary:
> > > > > > - we want rcu_normal_after_boot=1 on -RT via CONFIG_PREEMPT_RT_FULL
> > > > > 
> > > > > That would be good.
> > > > > 
> > > > > > - this makes synchronize_rcu_expedited() behave like
> > > > > >   synchronize_rcu() and therefore I can drop all patches replacing
> > > > > >   synchronize_rcu_expedited() with synchronize_rcu().
> > > > > 
> > > > > And this would be a benefit.  ;-)
> > > > > 
> > > > > > - optionally it has been requested to make synchronize_rcu() behave like
> > > > > >   synchronize_rcu_expedited() on shutdown and kexec().
> > > > > 
> > > > > You can invoke rcu_unexpedite_gp() to force all subsequennt grace periods
> > > > > to be expedited, but you do need to clear rcu_normal for this to have
> > > > > effect.  Right now, that means "WRITE_ONCE(rcu_normal, 0)", but I could
> > > > > easily supply a formal API if you would prefer.  Which you probably
> > > > > would given  that TINY_RCU doesn't have rcu_normal...
> > > > > 
> > > > > > Did I miss understood / forgot something?
> > > > > 
> > > > > It would not hurt to boot with rcu_expedited if boot speed is critical,
> > > > > but I don't know whether or not this should be enabled by default.
> > > > > 
> > > > > 							Thanx, Paul
> > > > 
> > > > I don't know either but I'd like to know ATM it's expedited
> > > > by default.
> > > 
> > > In current mainline, no.  That is, rcu_expedited=0 by default.
> > > 
> > > Or am I missing the point of your question?
> > > 
> > > 							Thanx, Paul
> > 
> > That's true - what I meant is that adding and removing network devices
> > happens on boot and calls synchronize_rcu_expedited,
> > with the commit log explaining that this is done for speeding up boot
> > and shutdown.
> 
> The rcu_normal boot parameter will indeed nullify this optimization.
> The boot parameters are normally dumped into dmesg, which should allow
> determining when this has happened.  But I do still feel like I am not
> fully understanding your concern.
> 
> 							Thanx, Paul

I thought you asked whether people that care about boot time
should just boot with rcu_expedited=1.

I was trying to say that the fact net core calls expedited sync
implies that many people care about boot time.

Should rcu_normal_after_boot override rcu_expedited?
I'm not sure what happens if you specify both ATM.

-- 
MST

Re: Making rcu_normal=1 in RT

[Sebastian Andrzej Siewior]

On 2016-11-01 05:31:56 [+0200], Michael S. Tsirkin wrote:
> > > > > > 
> > > > > > > - optionally it has been requested to make synchronize_rcu() behave like
> > > > > > >   synchronize_rcu_expedited() on shutdown and kexec().
> 
> I was trying to say that the fact net core calls expedited sync
> implies that many people care about boot time.
> 
> Should rcu_normal_after_boot override rcu_expedited?
> I'm not sure what happens if you specify both ATM.

I think what you asked for is something like this:

diff --git a/kernel/reboot.c b/kernel/reboot.c
--- a/kernel/reboot.c
+++ b/kernel/reboot.c
@@ -283,6 +283,7 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,
 	struct pid_namespace *pid_ns = task_active_pid_ns(current);
 	char buffer[256];
 	int ret = 0;
+	bool force_rcu_exp = false;
 
 	/* We only trust the superuser with rebooting the system. */
 	if (!ns_capable(pid_ns->user_ns, CAP_SYS_BOOT))
@@ -311,7 +312,19 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,
 	if ((cmd == LINUX_REBOOT_CMD_POWER_OFF) && !pm_power_off)
 		cmd = LINUX_REBOOT_CMD_HALT;
 
+	switch (cmd) {
+	case LINUX_REBOOT_CMD_RESTART:
+	case LINUX_REBOOT_CMD_HALT:
+	case LINUX_REBOOT_CMD_POWER_OFF:
+	case LINUX_REBOOT_CMD_RESTART2:
+	case LINUX_REBOOT_CMD_KEXEC:
+		force_rcu_exp = true;
+	}
+
 	mutex_lock(&reboot_mutex);
+	if (force_rcu_exp)
+		rcu_expedite_gp();
+
 	switch (cmd) {
 	case LINUX_REBOOT_CMD_RESTART:
 		kernel_restart(NULL);
@@ -362,6 +375,8 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,
 		ret = -EINVAL;
 		break;
 	}
+	if (force_rcu_exp)
+		rcu_unexpedite_gp();
 	mutex_unlock(&reboot_mutex);
 	return ret;
 }

and problem that this patch is pointless because it is too late. This
RESTART, POWER_OFF, KEXEC hooks here called once the `shutdown' binary
is done doing sync & cleanup and invokes the kernel for the final
operation.
So to achieve what you ask for, we would need a
LINUX_REBOOT_CMD_RCU_FAST option which is invoked by the `shutdown'
binary as the first thing - long before it gets to
LINUX_REBOOT_CMD_RESTART (or KEXEC).

Sebastian

[PATCH] rcu: update: make RCU_EXPEDITE_BOOT default

[Sebastian Andrzej Siewior]

RCU_EXPEDITE_BOOT should speed up the boot process by enforcing
synchronize_rcu_expedited() instead of synchronize_rcu() during the boot
process. There should be no reason why one does not want this and there
is no need worry about real time latency at this point.
Therefore make it default.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
Checked on two boxes and synchronize_rcu() was invoked four times before
it reached rcu_end_inkernel_boot()

 init/Kconfig        | 13 -------------
 kernel/rcu/update.c |  6 ++----
 2 files changed, 2 insertions(+), 17 deletions(-)

diff --git a/init/Kconfig b/init/Kconfig
index b6c9166d878a..fe51bd3bbc61 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -771,19 +771,6 @@ config RCU_NOCB_CPU_ALL
 
 endchoice
 
-config RCU_EXPEDITE_BOOT
-	bool
-	default n
-	help
-	  This option enables expedited grace periods at boot time,
-	  as if rcu_expedite_gp() had been invoked early in boot.
-	  The corresponding rcu_unexpedite_gp() is invoked from
-	  rcu_end_inkernel_boot(), which is intended to be invoked
-	  at the end of the kernel-only boot sequence, just before
-	  init is exec'ed.
-
-	  Accept the default if unsure.
-
 endmenu # "RCU Subsystem"
 
 config BUILD_BIN2C
diff --git a/kernel/rcu/update.c b/kernel/rcu/update.c
index b40d3468ba4e..419ca811bda9 100644
--- a/kernel/rcu/update.c
+++ b/kernel/rcu/update.c
@@ -130,8 +130,7 @@ bool rcu_gp_is_normal(void)
 }
 EXPORT_SYMBOL_GPL(rcu_gp_is_normal);
 
-static atomic_t rcu_expedited_nesting =
-	ATOMIC_INIT(IS_ENABLED(CONFIG_RCU_EXPEDITE_BOOT) ? 1 : 0);
+static atomic_t rcu_expedited_nesting = ATOMIC_INIT(1);
 
 /*
  * Should normal grace-period primitives be expedited?  Intended for
@@ -179,8 +178,7 @@ EXPORT_SYMBOL_GPL(rcu_unexpedite_gp);
  */
 void rcu_end_inkernel_boot(void)
 {
-	if (IS_ENABLED(CONFIG_RCU_EXPEDITE_BOOT))
-		rcu_unexpedite_gp();
+	rcu_unexpedite_gp();
 	if (rcu_normal_after_boot)
 		WRITE_ONCE(rcu_normal, 1);
 }
-- 
2.10.2

Re: Making rcu_normal=1 in RT

[Sebastian Andrzej Siewior]

On 2016-10-12 11:21:14 [-0500], Julia Cartwright wrote:
> Something like this, perhaps?
> 
>    Julia
> 
> -- 8< --
> Subject: [PATCH] rcu: enable rcu_normal_after_boot by default for RT

finally applied and dropped ("net: Make synchronize_rcu_expedited()
conditional on !RT_FULL").

Sebastian

Re: Making rcu_normal=1 in RT

[Luiz Capitulino]

On Wed, 2 Nov 2016 17:51:49 +0100
Sebastian Andrzej Siewior <bigeasy@linutronix.de> wrote:

> On 2016-10-12 11:21:14 [-0500], Julia Cartwright wrote:
> > Something like this, perhaps?
> > 
> >    Julia
> > 
> > -- 8< --
> > Subject: [PATCH] rcu: enable rcu_normal_after_boot by default for RT  
> 
> finally applied and dropped ("net: Make synchronize_rcu_expedited()
> conditional on !RT_FULL").

Cool, thanks for all involved!

Re: [PATCH] rcu: update: make RCU_EXPEDITE_BOOT default

[Paul E. McKenney]

On Wed, Nov 02, 2016 at 05:30:02PM +0100, Sebastian Andrzej Siewior wrote:
> RCU_EXPEDITE_BOOT should speed up the boot process by enforcing
> synchronize_rcu_expedited() instead of synchronize_rcu() during the boot
> process. There should be no reason why one does not want this and there
> is no need worry about real time latency at this point.
> Therefore make it default.
> 
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

Well, it has been awhile since I removed a Kconfig parameter.

So why could this be a bad thing?

1.	Very large systems might see scalability issues with unconditional
	expediting at boot.  But if we don't try it, we won't know.

2.	People bringing up new hardware might not want quite so many
	IPIs.  But they can just set rcu_normal to prevent that.

I am therefore queuing it for testiong and review.  ;-)

							Thanx, Paul

> ---
> Checked on two boxes and synchronize_rcu() was invoked four times before
> it reached rcu_end_inkernel_boot()
> 
>  init/Kconfig        | 13 -------------
>  kernel/rcu/update.c |  6 ++----
>  2 files changed, 2 insertions(+), 17 deletions(-)
> 
> diff --git a/init/Kconfig b/init/Kconfig
> index b6c9166d878a..fe51bd3bbc61 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -771,19 +771,6 @@ config RCU_NOCB_CPU_ALL
> 
>  endchoice
> 
> -config RCU_EXPEDITE_BOOT
> -	bool
> -	default n
> -	help
> -	  This option enables expedited grace periods at boot time,
> -	  as if rcu_expedite_gp() had been invoked early in boot.
> -	  The corresponding rcu_unexpedite_gp() is invoked from
> -	  rcu_end_inkernel_boot(), which is intended to be invoked
> -	  at the end of the kernel-only boot sequence, just before
> -	  init is exec'ed.
> -
> -	  Accept the default if unsure.
> -
>  endmenu # "RCU Subsystem"
> 
>  config BUILD_BIN2C
> diff --git a/kernel/rcu/update.c b/kernel/rcu/update.c
> index b40d3468ba4e..419ca811bda9 100644
> --- a/kernel/rcu/update.c
> +++ b/kernel/rcu/update.c
> @@ -130,8 +130,7 @@ bool rcu_gp_is_normal(void)
>  }
>  EXPORT_SYMBOL_GPL(rcu_gp_is_normal);
> 
> -static atomic_t rcu_expedited_nesting =
> -	ATOMIC_INIT(IS_ENABLED(CONFIG_RCU_EXPEDITE_BOOT) ? 1 : 0);
> +static atomic_t rcu_expedited_nesting = ATOMIC_INIT(1);
> 
>  /*
>   * Should normal grace-period primitives be expedited?  Intended for
> @@ -179,8 +178,7 @@ EXPORT_SYMBOL_GPL(rcu_unexpedite_gp);
>   */
>  void rcu_end_inkernel_boot(void)
>  {
> -	if (IS_ENABLED(CONFIG_RCU_EXPEDITE_BOOT))
> -		rcu_unexpedite_gp();
> +	rcu_unexpedite_gp();
>  	if (rcu_normal_after_boot)
>  		WRITE_ONCE(rcu_normal, 1);
>  }
> -- 
> 2.10.2
> 

Re: Making rcu_normal=1 in RT

[Paul E. McKenney]

On Wed, Nov 02, 2016 at 05:05:47PM +0100, Sebastian Andrzej Siewior wrote:
> On 2016-11-01 05:31:56 [+0200], Michael S. Tsirkin wrote:
> > > > > > > 
> > > > > > > > - optionally it has been requested to make synchronize_rcu() behave like
> > > > > > > >   synchronize_rcu_expedited() on shutdown and kexec().
> > 
> > I was trying to say that the fact net core calls expedited sync
> > implies that many people care about boot time.
> > 
> > Should rcu_normal_after_boot override rcu_expedited?
> > I'm not sure what happens if you specify both ATM.
> 
> I think what you asked for is something like this:
> 
> diff --git a/kernel/reboot.c b/kernel/reboot.c
> --- a/kernel/reboot.c
> +++ b/kernel/reboot.c
> @@ -283,6 +283,7 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,
>  	struct pid_namespace *pid_ns = task_active_pid_ns(current);
>  	char buffer[256];
>  	int ret = 0;
> +	bool force_rcu_exp = false;
> 
>  	/* We only trust the superuser with rebooting the system. */
>  	if (!ns_capable(pid_ns->user_ns, CAP_SYS_BOOT))
> @@ -311,7 +312,19 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,
>  	if ((cmd == LINUX_REBOOT_CMD_POWER_OFF) && !pm_power_off)
>  		cmd = LINUX_REBOOT_CMD_HALT;
> 
> +	switch (cmd) {
> +	case LINUX_REBOOT_CMD_RESTART:
> +	case LINUX_REBOOT_CMD_HALT:
> +	case LINUX_REBOOT_CMD_POWER_OFF:
> +	case LINUX_REBOOT_CMD_RESTART2:
> +	case LINUX_REBOOT_CMD_KEXEC:
> +		force_rcu_exp = true;
> +	}
> +
>  	mutex_lock(&reboot_mutex);
> +	if (force_rcu_exp)
> +		rcu_expedite_gp();
> +
>  	switch (cmd) {
>  	case LINUX_REBOOT_CMD_RESTART:
>  		kernel_restart(NULL);
> @@ -362,6 +375,8 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,
>  		ret = -EINVAL;
>  		break;
>  	}
> +	if (force_rcu_exp)
> +		rcu_unexpedite_gp();
>  	mutex_unlock(&reboot_mutex);
>  	return ret;
>  }
> 
> and problem that this patch is pointless because it is too late. This
> RESTART, POWER_OFF, KEXEC hooks here called once the `shutdown' binary
> is done doing sync & cleanup and invokes the kernel for the final
> operation.
> So to achieve what you ask for, we would need a
> LINUX_REBOOT_CMD_RCU_FAST option which is invoked by the `shutdown'
> binary as the first thing - long before it gets to
> LINUX_REBOOT_CMD_RESTART (or KEXEC).

FWIW, this looks sane to me.

							Thanx, Paul

Re: [PATCH] rcu: update: make RCU_EXPEDITE_BOOT default

[Sebastian Andrzej Siewior]

On 2016-11-03 09:22:28 [-0700], Paul E. McKenney wrote:
> On Wed, Nov 02, 2016 at 05:30:02PM +0100, Sebastian Andrzej Siewior wrote:
> > RCU_EXPEDITE_BOOT should speed up the boot process by enforcing
> > synchronize_rcu_expedited() instead of synchronize_rcu() during the boot
> > process. There should be no reason why one does not want this and there
> > is no need worry about real time latency at this point.
> > Therefore make it default.
> > 
> > Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> 
> Well, it has been awhile since I removed a Kconfig parameter.
> 
> So why could this be a bad thing?
> 
> 1.	Very large systems might see scalability issues with unconditional
> 	expediting at boot.  But if we don't try it, we won't know.

You mean we would make the boot process slower for them instead of
faster?

> 2.	People bringing up new hardware might not want quite so many
> 	IPIs.  But they can just set rcu_normal to prevent that.

I wanted to make things simple and not complicated…

> I am therefore queuing it for testiong and review.  ;-)

Okay thanks.

> 							Thanx, Paul

Sebastian

Re: [PATCH] rcu: update: make RCU_EXPEDITE_BOOT default

[Paul E. McKenney]

On Thu, Nov 03, 2016 at 05:33:27PM +0100, Sebastian Andrzej Siewior wrote:
> On 2016-11-03 09:22:28 [-0700], Paul E. McKenney wrote:
> > On Wed, Nov 02, 2016 at 05:30:02PM +0100, Sebastian Andrzej Siewior wrote:
> > > RCU_EXPEDITE_BOOT should speed up the boot process by enforcing
> > > synchronize_rcu_expedited() instead of synchronize_rcu() during the boot
> > > process. There should be no reason why one does not want this and there
> > > is no need worry about real time latency at this point.
> > > Therefore make it default.
> > > 
> > > Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> > 
> > Well, it has been awhile since I removed a Kconfig parameter.
> > 
> > So why could this be a bad thing?
> > 
> > 1.	Very large systems might see scalability issues with unconditional
> > 	expediting at boot.  But if we don't try it, we won't know.
> 
> You mean we would make the boot process slower for them instead of
> faster?

For really bit systems, quite possibly, where "really big" means
many hundreds or (more likely) thousands of CPUs.

But there are things that I can do to fix this when and if.

> > 2.	People bringing up new hardware might not want quite so many
> > 	IPIs.  But they can just set rcu_normal to prevent that.
> 
> I wanted to make things simple and not complicated…

I know that feeling.  ;-)

> > I am therefore queuing it for testiong and review.  ;-)
> 
> Okay thanks.

							Thanx, Paul

> Sebastian
> 

Re: [PATCH] rcu: update: make RCU_EXPEDITE_BOOT default

[Steven Rostedt]

On Thu, 3 Nov 2016 09:59:31 -0700
"Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:

> On Thu, Nov 03, 2016 at 05:33:27PM +0100, Sebastian Andrzej Siewior wrote:
> > On 2016-11-03 09:22:28 [-0700], Paul E. McKenney wrote:  
> > > On Wed, Nov 02, 2016 at 05:30:02PM +0100, Sebastian Andrzej Siewior wrote:  
> > > > RCU_EXPEDITE_BOOT should speed up the boot process by enforcing
> > > > synchronize_rcu_expedited() instead of synchronize_rcu() during the boot
> > > > process. There should be no reason why one does not want this and there
> > > > is no need worry about real time latency at this point.
> > > > Therefore make it default.
> > > > 
> > > > Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>  
> > > 
> > > Well, it has been awhile since I removed a Kconfig parameter.
> > > 
> > > So why could this be a bad thing?
> > > 
> > > 1.	Very large systems might see scalability issues with unconditional
> > > 	expediting at boot.  But if we don't try it, we won't know.  
> > 
> > You mean we would make the boot process slower for them instead of
> > faster?  
> 
> For really bit systems, quite possibly, where "really big" means
> many hundreds or (more likely) thousands of CPUs.
> 
> But there are things that I can do to fix this when and if.
> 
> > > 2.	People bringing up new hardware might not want quite so many
> > > 	IPIs.  But they can just set rcu_normal to prevent that.  
> > 
> > I wanted to make things simple and not complicated…  
> 
> I know that feeling.  ;-)
> 

I agree, but if this creates a boot time regression in large machines,
it may not be warranted.

I know Linus usually doesn't like options with default y, but this may
be one of those exceptions. Perhaps we should make it on by default and
say in the config "if you have a machine with 100s or 1000s of CPUs,
you may want to disable this".

-- Steve

Re: [PATCH] rcu: update: make RCU_EXPEDITE_BOOT default

[Sebastian Andrzej Siewior]

On 2016-11-07 12:19:39 [-0500], Steven Rostedt wrote:
> I agree, but if this creates a boot time regression in large machines,
> it may not be warranted.
> 
> I know Linus usually doesn't like options with default y, but this may
> be one of those exceptions. Perhaps we should make it on by default and
> say in the config "if you have a machine with 100s or 1000s of CPUs,
> you may want to disable this".

The default could change if we know where the limit is. I have access to
a box with approx 140 CPUs so I could check there if it is already bad.
But everything above that / in the 1000 range is a different story.

> -- Steve

Sebastian

Re: [PATCH] rcu: update: make RCU_EXPEDITE_BOOT default

[Josh Triplett]

On Mon, Nov 07, 2016 at 06:30:30PM +0100, Sebastian Andrzej Siewior wrote:
> On 2016-11-07 12:19:39 [-0500], Steven Rostedt wrote:
> > I agree, but if this creates a boot time regression in large machines,
> > it may not be warranted.
> > 
> > I know Linus usually doesn't like options with default y, but this may
> > be one of those exceptions. Perhaps we should make it on by default and
> > say in the config "if you have a machine with 100s or 1000s of CPUs,
> > you may want to disable this".
> 
> The default could change if we know where the limit is. I have access to
> a box with approx 140 CPUs so I could check there if it is already bad.
> But everything above that / in the 1000 range is a different story.

Right; if we can characterize what machines it benefits and what
machines it hurts, we can automatically detect and run the appropriate
case with no configuration option needed.

Re: [PATCH] rcu: update: make RCU_EXPEDITE_BOOT default

[Paul E. McKenney]

On Mon, Nov 07, 2016 at 09:35:46AM -0800, Josh Triplett wrote:
> On Mon, Nov 07, 2016 at 06:30:30PM +0100, Sebastian Andrzej Siewior wrote:
> > On 2016-11-07 12:19:39 [-0500], Steven Rostedt wrote:
> > > I agree, but if this creates a boot time regression in large machines,
> > > it may not be warranted.
> > > 
> > > I know Linus usually doesn't like options with default y, but this may
> > > be one of those exceptions. Perhaps we should make it on by default and
> > > say in the config "if you have a machine with 100s or 1000s of CPUs,
> > > you may want to disable this".
> > 
> > The default could change if we know where the limit is. I have access to
> > a box with approx 140 CPUs so I could check there if it is already bad.
> > But everything above that / in the 1000 range is a different story.
> 
> Right; if we can characterize what machines it benefits and what
> machines it hurts, we can automatically detect and run the appropriate
> case with no configuration option needed.

I very much like this approach!  Anyone have access to large systems on
which this experiment could be carried out?  In the absence of new data,
I would just set the cutoff at 256 CPUs, as I have done in the past.

							Thanx, Paul

Re: [PATCH] rcu: update: make RCU_EXPEDITE_BOOT default

[Josh Triplett]

On Mon, Nov 07, 2016 at 10:05:13AM -0800, Paul E. McKenney wrote:
> On Mon, Nov 07, 2016 at 09:35:46AM -0800, Josh Triplett wrote:
> > On Mon, Nov 07, 2016 at 06:30:30PM +0100, Sebastian Andrzej Siewior wrote:
> > > On 2016-11-07 12:19:39 [-0500], Steven Rostedt wrote:
> > > > I agree, but if this creates a boot time regression in large machines,
> > > > it may not be warranted.
> > > > 
> > > > I know Linus usually doesn't like options with default y, but this may
> > > > be one of those exceptions. Perhaps we should make it on by default and
> > > > say in the config "if you have a machine with 100s or 1000s of CPUs,
> > > > you may want to disable this".
> > > 
> > > The default could change if we know where the limit is. I have access to
> > > a box with approx 140 CPUs so I could check there if it is already bad.
> > > But everything above that / in the 1000 range is a different story.
> > 
> > Right; if we can characterize what machines it benefits and what
> > machines it hurts, we can automatically detect and run the appropriate
> > case with no configuration option needed.
> 
> I very much like this approach!  Anyone have access to large systems on
> which this experiment could be carried out?  In the absence of new data,
> I would just set the cutoff at 256 CPUs, as I have done in the past.

One potential issue here: the point where RCU_EXPEDITE_BOOT pessimizes
likely depends on interconnect as much as CPUs.  I'd guess that you may
want to set the cutoff based on number of NUMA nodes, rather than number
of CPUs.

Re: [PATCH] rcu: update: make RCU_EXPEDITE_BOOT default

[Paul E. McKenney]

On Mon, Nov 07, 2016 at 10:08:32AM -0800, Josh Triplett wrote:
> On Mon, Nov 07, 2016 at 10:05:13AM -0800, Paul E. McKenney wrote:
> > On Mon, Nov 07, 2016 at 09:35:46AM -0800, Josh Triplett wrote:
> > > On Mon, Nov 07, 2016 at 06:30:30PM +0100, Sebastian Andrzej Siewior wrote:
> > > > On 2016-11-07 12:19:39 [-0500], Steven Rostedt wrote:
> > > > > I agree, but if this creates a boot time regression in large machines,
> > > > > it may not be warranted.
> > > > > 
> > > > > I know Linus usually doesn't like options with default y, but this may
> > > > > be one of those exceptions. Perhaps we should make it on by default and
> > > > > say in the config "if you have a machine with 100s or 1000s of CPUs,
> > > > > you may want to disable this".
> > > > 
> > > > The default could change if we know where the limit is. I have access to
> > > > a box with approx 140 CPUs so I could check there if it is already bad.
> > > > But everything above that / in the 1000 range is a different story.
> > > 
> > > Right; if we can characterize what machines it benefits and what
> > > machines it hurts, we can automatically detect and run the appropriate
> > > case with no configuration option needed.
> > 
> > I very much like this approach!  Anyone have access to large systems on
> > which this experiment could be carried out?  In the absence of new data,
> > I would just set the cutoff at 256 CPUs, as I have done in the past.
> 
> One potential issue here: the point where RCU_EXPEDITE_BOOT pessimizes
> likely depends on interconnect as much as CPUs.  I'd guess that you may
> want to set the cutoff based on number of NUMA nodes, rather than number
> of CPUs.

Longer term, the solution would be a function that defined the cutoff
point.  If an architecture didn't define the function, they get the
default cutoff of 256.  If they do define the function, they get whatever
they coded.

							Thanx, Paul

[rcu] c6908ba082: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-... } 26689 jiffies s: 9 root: 0x1/.

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 3157 bytes --]



FYI, we noticed the following commit:

https://github.com/0day-ci/linux Sebastian-Andrzej-Siewior/rcu-update-make-RCU_EXPEDITE_BOOT-default/20161103-003554
commit c6908ba082e8e4ecc5427550ac8c5d70f6f5ae10 ("rcu: update: make RCU_EXPEDITE_BOOT default")

in testcase: boot

on test machine: qemu-system-x86_64 -enable-kvm -cpu Nehalem -smp 2 -m 512M

caused below changes:


+-----------------------------------------------------------------------------------+------------+------------+
|                                                                                   | 397601b50a | c6908ba082 |
+-----------------------------------------------------------------------------------+------------+------------+
| boot_successes                                                                    | 2          | 0          |
| boot_failures                                                                     | 22         | 20         |
| INFO:rcu_sched_self-detected_stall_on_CPU                                         | 17         | 4          |
| INFO:rcu_sched_detected_stalls_on_CPUs/tasks                                      | 8          | 3          |
| calltrace:mark_rodata_ro                                                          | 17         | 6          |
| BUG:kernel_hang_in_test_stage                                                     | 20         | 20         |
| INFO:rcu_sched_detected_expedited_stalls_on_CPUs/tasks:{#-...}#jiffies_s:#root:#/ | 0          | 14         |
+-----------------------------------------------------------------------------------+------------+------------+



[   26.620411] Write protecting the kernel read-only data: 24576k
[   26.641907] Freeing unused kernel memory: 600K (ffff880001f6a000 - ffff880002000000)
[   26.676629] Freeing unused kernel memory: 752K (ffff880002744000 - ffff880002800000)
[  138.495897] INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-... } 26689 jiffies s: 9 root: 0x1/.
[  138.499676] blocking rcu_node structures:
[  138.500730] Task dump for CPU 0:
[  138.501530] swapper/0       R  running task        0     1      0 0x00000008
[  138.503124]  0000000000000000 0000000000000004 0000000000000004 ffff88001924fc50
[  138.505243]  8000000000000161 ffff88001924fc98 ffffffff8100177a 0000000000000000
[  138.507283]  0000000000000001 0000000000000000 0000000000000003 ffffed0003248161
[  138.509357] Call Trace:
[  138.510032]  [<ffffffff8115e4d2>] ? trace_hardirqs_on_caller+0x2b2/0x2f0
[  138.511371]  [<ffffffff8100177a>] ? trace_hardirqs_on_thunk+0x1a/0x1c
[  138.517700]  [<ffffffff8115e193>] ? mark_held_locks+0x23/0xb0
[  138.528252]  [<ffffffff81f62c9c>] retint_kernel+0x10/0x10
[  138.529455]  [<ffffffff8100177a>] ? trace_hardirqs_on_thunk+0x1a/0x1c
[  138.530765]  [<ffffffff810ef903>] ? irq_exit+0xa3/0xd0
[  138.531885]  [<ffffffff81f62c9c>] ? retint_kernel+0x10/0x10


To reproduce:

        git clone git://git.kernel.org/pub/scm/linux/kernel/git/wfg/lkp-tests.git
        cd lkp-tests
        bin/lkp qemu -k <bzImage> job-script  # job-script is attached in this email



Thanks,
Xiaolong

[-- Attachment #2: config-4.9.0-rc1-00021-gc6908ba --]
[-- Type: text/plain, Size: 112187 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 4.9.0-rc1 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_KASAN_SHADOW_OFFSET=0xdffffc0000000000
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEBUG_RODATA=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
CONFIG_KERNEL_LZO=y
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_FHANDLE=y
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_NMI_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
# CONFIG_MEMCG_SWAP is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_DEBUG=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_USERFAULTFD=y
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLUB_CPU_PARTIAL is not set
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set
CONFIG_GCC_PLUGIN_LATENT_ENTROPY=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
CONFIG_CC_STACKPROTECTOR_REGULAR=y
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_GCOV_PROFILE_ALL is not set
# CONFIG_GCOV_FORMAT_AUTODETECT is not set
# CONFIG_GCOV_FORMAT_3_4 is not set
CONFIG_GCOV_FORMAT_4_7=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS=y
CONFIG_MODULE_COMPRESS_GZIP=y
# CONFIG_MODULE_COMPRESS_XZ is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_CMDLINE_PARSER is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=m
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
# CONFIG_FREEZER is not set

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
CONFIG_X86_X2APIC=y
# CONFIG_X86_MPPARSE is not set
CONFIG_GOLDFISH=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
CONFIG_IOSF_MBI_DEBUG=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_QUEUED_LOCK_STAT=y
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=8192
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=m
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=m
CONFIG_PERF_EVENTS_AMD_POWER=y
# CONFIG_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
# CONFIG_X86_CPUID is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
# CONFIG_BALLOON_COMPACTION is not set
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
CONFIG_ZPOOL=m
CONFIG_ZBUD=m
CONFIG_Z3FOLD=m
CONFIG_ZSMALLOC=m
# CONFIG_PGTABLE_MAPPING is not set
CONFIG_ZSMALLOC_STAT=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_X86_PMEM_LEGACY is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_EFI=y
# CONFIG_EFI_STUB is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_KEXEC_FILE is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
# CONFIG_HOTPLUG_CPU is not set
CONFIG_COMPAT_VDSO=y
# CONFIG_LEGACY_VSYSCALL_NATIVE is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
# CONFIG_PM is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR_CSTATE=y
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_IPMI is not set
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=y
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
CONFIG_DPTF_POWER=m
CONFIG_ACPI_WATCHDOG=y
CONFIG_ACPI_EXTLOG=y
CONFIG_PMIC_OPREGION=y
CONFIG_ACPI_CONFIGFS=m
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y

#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
# CONFIG_PCIEASPM_DEFAULT is not set
# CONFIG_PCIEASPM_POWERSAVE is not set
CONFIG_PCIEASPM_PERFORMANCE=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=m
# CONFIG_HT_IRQ is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_ACPI is not set
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# PCI host controller drivers
#
CONFIG_PCIE_DW_PLAT=y
CONFIG_PCIE_DW=y
CONFIG_VMD=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_RAPIDIO is not set
CONFIG_X86_SYSFB=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y

#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_NET_KEY is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NET_PTP_CLASSIFY is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_HSR is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_SOCK_CGROUP_DATA is not set
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_NFC is not set
# CONFIG_LWTUNNEL is not set
# CONFIG_DST_CACHE is not set
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_FENCE_TRACE=y

#
# Bus devices
#
# CONFIG_QCOM_EBI2 is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set

#
# DRBD disabled because PROC_FS or INET not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RSXX is not set
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
CONFIG_BLK_DEV_NVME_SCSI=y
CONFIG_NVME_TARGET=y
# CONFIG_NVME_TARGET_LOOP is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
# CONFIG_AD525X_DPOT_I2C is not set
# CONFIG_AD525X_DPOT_SPI is not set
# CONFIG_DUMMY_IRQ is not set
CONFIG_IBM_ASM=y
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=m
# CONFIG_TI_DAC7512 is not set
CONFIG_USB_SWITCH_FSA9480=m
CONFIG_LATTICE_ECP3_CONFIG=y
# CONFIG_SRAM is not set
CONFIG_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=m

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_AT25=m
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=m
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_INTEL_MEI=m
# CONFIG_INTEL_MEI_ME is not set
CONFIG_INTEL_MEI_TXE=m
# CONFIG_VMWARE_VMCI is not set

#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set

#
# SCIF Bus Driver
#
CONFIG_SCIF_BUS=m

#
# VOP Bus Driver
#
CONFIG_VOP_BUS=y

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#
CONFIG_SCIF=m

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
CONFIG_MIC_COSM=m

#
# VOP Driver
#
# CONFIG_VOP is not set
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=m

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=m
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=m
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_PLATFORM=m
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=m
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=m
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=m
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
# CONFIG_BLK_DEV_CMD64X is not set
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_JMICRON=m
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT8172=m
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=m
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
# CONFIG_BLK_DEV_SLC90E66 is not set
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
CONFIG_BLK_DEV_TC86C001=m
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_MQ_DEFAULT=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_BOOT_SYSFS=y
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_HPSA=y
# CONFIG_SCSI_3W_9XXX is not set
CONFIG_SCSI_3W_SAS=m
CONFIG_SCSI_ACARD=m
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_BUILD_FIRMWARE is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
# CONFIG_SCSI_MVSAS is not set
CONFIG_SCSI_MVUMI=y
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=y
# CONFIG_SCSI_ESAS2R is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_FLASHPOINT=y
CONFIG_VMWARE_PVSCSI=y
# CONFIG_SCSI_SNIC is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=m
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_ISCI=m
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=y
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_IZIP_EPP16=y
CONFIG_SCSI_IZIP_SLOW_CTR=y
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLA_ISCSI is not set
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_AM53C974=y
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_PMCRAID is not set
CONFIG_SCSI_PM8001=y
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
# CONFIG_PCMCIA_SYM53C500 is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
CONFIG_SATA_SIL24=m
# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_AUTODETECT is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=y
# CONFIG_MD_FAULTY is not set
CONFIG_BCACHE=m
CONFIG_BCACHE_DEBUG=y
CONFIG_BCACHE_CLOSURES_DEBUG=y
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_MQ_DEFAULT is not set
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_CRYPT is not set
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_CACHE is not set
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_RAID=m
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_FEC is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_SBP2=m
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
# CONFIG_NETDEVICES is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_LEDS is not set
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5520 is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TWL4030 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CROS_EC is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_VMMOUSE=y
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=y
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_CYAPA=m
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_GPIO=y
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=y
# CONFIG_JOYSTICK_IFORCE is not set
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_DB9=m
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_JOYSTICK_XPAD=y
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_HANWANG=m
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_AD7877=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_AD7879_SPI=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
CONFIG_TOUCHSCREEN_BU21013=y
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
# CONFIG_TOUCHSCREEN_CYTTSP_SPI is not set
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP4_I2C=m
# CONFIG_TOUCHSCREEN_CYTTSP4_SPI is not set
# CONFIG_TOUCHSCREEN_DA9052 is not set
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=m
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_GOODIX=m
CONFIG_TOUCHSCREEN_ILI210X=m
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_EKTF2127=y
CONFIG_TOUCHSCREEN_ELAN=y
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
CONFIG_TOUCHSCREEN_WACOM_I2C=y
# CONFIG_TOUCHSCREEN_MAX11801 is not set
CONFIG_TOUCHSCREEN_MCS5000=m
CONFIG_TOUCHSCREEN_MMS114=m
CONFIG_TOUCHSCREEN_MELFAS_MIP4=y
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_PIXCIR=m
CONFIG_TOUCHSCREEN_WDT87XX_I2C=m
CONFIG_TOUCHSCREEN_WM831X=m
CONFIG_TOUCHSCREEN_WM97XX=m
# CONFIG_TOUCHSCREEN_WM9705 is not set
CONFIG_TOUCHSCREEN_WM9712=y
# CONFIG_TOUCHSCREEN_WM9713 is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
# CONFIG_TOUCHSCREEN_MC13783 is not set
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC_SERIO=y
CONFIG_TOUCHSCREEN_TSC200X_CORE=m
CONFIG_TOUCHSCREEN_TSC2004=m
CONFIG_TOUCHSCREEN_TSC2005=m
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_TOUCHSCREEN_RM_TS=y
CONFIG_TOUCHSCREEN_SILEAD=y
CONFIG_TOUCHSCREEN_SIS_I2C=y
# CONFIG_TOUCHSCREEN_ST1232 is not set
CONFIG_TOUCHSCREEN_SURFACE3_SPI=m
CONFIG_TOUCHSCREEN_SX8654=y
CONFIG_TOUCHSCREEN_TPS6507X=y
CONFIG_TOUCHSCREEN_ZFORCE=y
CONFIG_TOUCHSCREEN_ROHM_BU21023=y
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=y
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not set
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=y
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
# CONFIG_SYNCLINK_GT is not set
CONFIG_NOZOMI=m
CONFIG_ISI=y
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_ROUTER is not set
CONFIG_TRACE_SINK=y
CONFIG_GOLDFISH_TTY=m
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
CONFIG_SERIAL_UARTLITE=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SCCNXP is not set
CONFIG_SERIAL_SC16IS7XX_CORE=m
CONFIG_SERIAL_SC16IS7XX=m
# CONFIG_SERIAL_SC16IS7XX_I2C is not set
CONFIG_SERIAL_SC16IS7XX_SPI=y
CONFIG_SERIAL_ALTERA_JTAGUART=y
# CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_ARC is not set
CONFIG_SERIAL_RP2=m
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
# CONFIG_PRINTER is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_VIA=y
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=y
CONFIG_R3964=y
CONFIG_APPLICOM=y

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_CARDMAN_4000=m
# CONFIG_CARDMAN_4040 is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_XILLYBUS=m
CONFIG_XILLYBUS_PCIE=m

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_MUX_PINCTRL=m
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=y
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=m
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_SIS5595 is not set
CONFIG_I2C_SIS630=m
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=y
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=m
CONFIG_I2C_DESIGNWARE_CORE=m
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
CONFIG_I2C_DESIGNWARE_PCI=m
# CONFIG_I2C_EMEV2 is not set
CONFIG_I2C_GPIO=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=y
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_ROBOTFUZZ_OSIF=m
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_CROS_EC_TUNNEL=m
CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_AXI_SPI_ENGINE=m
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_BUTTERFLY is not set
CONFIG_SPI_CADENCE=y
# CONFIG_SPI_DESIGNWARE is not set
CONFIG_SPI_GPIO=y
CONFIG_SPI_LM70_LLP=y
CONFIG_SPI_OC_TINY=y
CONFIG_SPI_PXA2XX=m
CONFIG_SPI_PXA2XX_PCI=m
# CONFIG_SPI_ROCKCHIP is not set
CONFIG_SPI_SC18IS602=y
CONFIG_SPI_XCOMM=y
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set

#
# PPS support
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
CONFIG_NTP_PPS=y

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y

#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_PINCTRL_AMD=y
# CONFIG_PINCTRL_BAYTRAIL is not set
# CONFIG_PINCTRL_CHERRYVIEW is not set
CONFIG_PINCTRL_INTEL=m
CONFIG_PINCTRL_BROXTON=m
CONFIG_PINCTRL_SUNRISEPOINT=m
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_AMDPT=y
CONFIG_GPIO_AXP209=m
CONFIG_GPIO_DWAPB=m
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_ICH is not set
# CONFIG_GPIO_LYNXPOINT is not set
# CONFIG_GPIO_MOCKUP is not set
CONFIG_GPIO_VX855=y
CONFIG_GPIO_ZX=y

#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_F7188X=y
CONFIG_GPIO_IT87=m
CONFIG_GPIO_SCH=m
CONFIG_GPIO_SCH311X=m

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=m
CONFIG_GPIO_MAX7300=y
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=m
CONFIG_GPIO_SX150X=y
# CONFIG_GPIO_TPIC2810 is not set
CONFIG_GPIO_TS4900=m

#
# MFD GPIO expanders
#
# CONFIG_GPIO_ADP5520 is not set
# CONFIG_GPIO_ARIZONA is not set
# CONFIG_GPIO_DA9052 is not set
CONFIG_GPIO_DA9055=y
# CONFIG_GPIO_LP3943 is not set
# CONFIG_GPIO_LP873X is not set
# CONFIG_GPIO_TPS65086 is not set
CONFIG_GPIO_TPS65218=y
CONFIG_GPIO_TPS65912=m
# CONFIG_GPIO_TWL4030 is not set
# CONFIG_GPIO_TWL6040 is not set
CONFIG_GPIO_UCB1400=m
# CONFIG_GPIO_WM831X is not set
CONFIG_GPIO_WM8350=m

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
CONFIG_GPIO_ML_IOH=m
CONFIG_GPIO_RDC321X=m

#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX7301 is not set
CONFIG_GPIO_MC33880=y
CONFIG_GPIO_PISOSR=m

#
# SPI or I2C GPIO expanders
#

#
# USB GPIO expanders
#
# CONFIG_GPIO_VIPERBOARD is not set
CONFIG_W1=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=m

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2408 is not set
CONFIG_W1_SLAVE_DS2413=y
# CONFIG_W1_SLAVE_DS2406 is not set
CONFIG_W1_SLAVE_DS2423=m
# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
# CONFIG_W1_SLAVE_DS2760 is not set
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_AVS=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
CONFIG_MAX8925_POWER=m
# CONFIG_WM831X_BACKUP is not set
# CONFIG_WM831X_POWER is not set
CONFIG_WM8350_POWER=m
CONFIG_TEST_POWER=m
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_DA9052 is not set
CONFIG_AXP288_CHARGER=m
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_BATTERY_MAX17042=y
CONFIG_CHARGER_PCF50633=y
CONFIG_CHARGER_ISP1704=m
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_LP8727 is not set
CONFIG_CHARGER_GPIO=m
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
CONFIG_CHARGER_BQ24257=m
CONFIG_CHARGER_BQ24735=y
# CONFIG_CHARGER_BQ25890 is not set
CONFIG_CHARGER_SMB347=y
# CONFIG_CHARGER_TPS65090 is not set
# CONFIG_CHARGER_TPS65217 is not set
CONFIG_BATTERY_GAUGE_LTC2941=y
# CONFIG_BATTERY_GOLDFISH is not set
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
CONFIG_AXP20X_POWER=m
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=y
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=y
CONFIG_SENSORS_ADT7411=m
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=y
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=y
CONFIG_SENSORS_FAM15H_POWER=y
CONFIG_SENSORS_APPLESMC=m
# CONFIG_SENSORS_ARM_SCPI is not set
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_DELL_SMM is not set
CONFIG_SENSORS_DA9052_ADC=m
CONFIG_SENSORS_DA9055=y
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_MC13783_ADC=m
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_FTSTEUTATES=y
CONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_G762=y
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_HIH6130=m
# CONFIG_SENSORS_IBMAEM is not set
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_I5500=y
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LTC2945=m
CONFIG_SENSORS_LTC2990=m
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4222=y
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LTC4260=y
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX1111=y
CONFIG_SENSORS_MAX16065=y
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_MAX31722=y
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=y
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
CONFIG_SENSORS_ADCXX=y
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
CONFIG_SENSORS_PC87360=y
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775=m
CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NCT7904=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
CONFIG_SENSORS_SHT15=m
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
CONFIG_SENSORS_SHTC1=y
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_SCH56XX_COMMON=y
CONFIG_SENSORS_SCH5627=y
CONFIG_SENSORS_SCH5636=y
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS1015=y
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=m
# CONFIG_SENSORS_INA209 is not set
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_INA3221=m
CONFIG_SENSORS_TC74=y
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP103=y
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=y
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=m
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_WM831X=m
CONFIG_SENSORS_WM8350=y

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=y
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=m
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_EMULATION=y
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_PKG_TEMP_THERMAL=m
CONFIG_INTEL_SOC_DTS_IOSF_CORE=m
CONFIG_INTEL_SOC_DTS_THERMAL=m

#
# ACPI INT340X thermal drivers
#
CONFIG_INT340X_THERMAL=m
CONFIG_ACPI_THERMAL_REL=m
CONFIG_INT3406_THERMAL=m
CONFIG_INTEL_PCH_THERMAL=m
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WATCHDOG_SYSFS is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
# CONFIG_DA9052_WATCHDOG is not set
CONFIG_DA9055_WATCHDOG=m
CONFIG_DA9062_WATCHDOG=m
CONFIG_WDAT_WDT=y
CONFIG_WM831X_WATCHDOG=y
# CONFIG_WM8350_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
CONFIG_ZIIRAVE_WATCHDOG=y
CONFIG_CADENCE_WATCHDOG=m
CONFIG_DW_WATCHDOG=y
# CONFIG_TWL4030_WATCHDOG is not set
CONFIG_MAX63XX_WATCHDOG=y
# CONFIG_RETU_WATCHDOG is not set
CONFIG_ACQUIRE_WDT=y
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=y
CONFIG_SP5100_TCO=y
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=y
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=m
# CONFIG_I6300ESB_WDT is not set
CONFIG_IE6XX_WDT=y
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=y
CONFIG_IT87_WDT=y
CONFIG_HP_WATCHDOG=m
# CONFIG_HPWDT_NMI_DECODING is not set
CONFIG_SC1200_WDT=m
CONFIG_PC87413_WDT=m
# CONFIG_NV_TCO is not set
CONFIG_60XX_WDT=m
CONFIG_CPU5_WDT=y
# CONFIG_SMSC_SCH311X_WDT is not set
CONFIG_SMSC37B787_WDT=y
CONFIG_VIA_WDT=y
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
CONFIG_INTEL_MEI_WDT=m
# CONFIG_NI903X_WDT is not set
# CONFIG_MEN_A21_WDT is not set

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=y
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y

#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP is not set
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=m
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_AS3711=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_AXP20X=m
CONFIG_MFD_AXP20X_I2C=m
CONFIG_MFD_CROS_EC=m
CONFIG_MFD_CROS_EC_I2C=m
# CONFIG_MFD_CROS_EC_SPI is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=m
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
CONFIG_MFD_EXYNOS_LPASS=y
CONFIG_MFD_MC13XXX=y
# CONFIG_MFD_MC13XXX_SPI is not set
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=m
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
# CONFIG_INTEL_SOC_PMIC is not set
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
CONFIG_MFD_88PM800=m
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
CONFIG_MFD_MAX77843=y
# CONFIG_MFD_MAX8907 is not set
CONFIG_MFD_MAX8925=y
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6397=m
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_VIPERBOARD=m
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
# CONFIG_PCF50633_ADC is not set
CONFIG_PCF50633_GPIO=m
CONFIG_UCB1400_CORE=m
CONFIG_MFD_RDC321X=m
CONFIG_MFD_RTSX_PCI=y
CONFIG_MFD_RT5033=y
CONFIG_MFD_RTSX_USB=m
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=m
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
CONFIG_MFD_SKY81452=y
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
CONFIG_MFD_LP3943=m
CONFIG_MFD_LP8788=y
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=m
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=m
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TI_LP873X=m
CONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=m
CONFIG_MFD_TPS65912_I2C=m
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
CONFIG_TWL4030_CORE=y
# CONFIG_MFD_TWL4030_AUDIO is not set
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=m
CONFIG_MFD_LM3533=m
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=m
# CONFIG_MFD_ARIZONA_SPI is not set
CONFIG_MFD_CS47L24=y
# CONFIG_MFD_WM5102 is not set
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
# CONFIG_MFD_WM831X_SPI is not set
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_WM8994 is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_88PM800=m
# CONFIG_REGULATOR_ACT8865 is not set
CONFIG_REGULATOR_AD5398=y
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_ARIZONA=m
CONFIG_REGULATOR_AS3711=m
CONFIG_REGULATOR_AXP20X=m
# CONFIG_REGULATOR_BCM590XX is not set
# CONFIG_REGULATOR_DA9052 is not set
CONFIG_REGULATOR_DA9055=m
CONFIG_REGULATOR_DA9062=m
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_DA9211 is not set
CONFIG_REGULATOR_FAN53555=m
# CONFIG_REGULATOR_GPIO is not set
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=m
CONFIG_REGULATOR_LP3971=m
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP8755=y
# CONFIG_REGULATOR_LP8788 is not set
CONFIG_REGULATOR_LTC3589=y
# CONFIG_REGULATOR_LTC3676 is not set
CONFIG_REGULATOR_MAX1586=m
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8925=m
CONFIG_REGULATOR_MAX8952=m
# CONFIG_REGULATOR_MAX77693 is not set
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_MT6311=y
# CONFIG_REGULATOR_MT6323 is not set
CONFIG_REGULATOR_MT6397=m
CONFIG_REGULATOR_PCF50633=y
CONFIG_REGULATOR_PFUZE100=m
CONFIG_REGULATOR_PV88060=m
CONFIG_REGULATOR_PV88080=y
CONFIG_REGULATOR_PV88090=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_RT5033=y
CONFIG_REGULATOR_S2MPA01=y
# CONFIG_REGULATOR_S2MPS11 is not set
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS6105X=m
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS65023=m
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_REGULATOR_TPS65086=y
CONFIG_REGULATOR_TPS65090=y
# CONFIG_REGULATOR_TPS65217 is not set
CONFIG_REGULATOR_TPS6524X=y
CONFIG_REGULATOR_TPS65912=m
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8350=m
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_RC_SUPPORT is not set
CONFIG_MEDIA_CONTROLLER=y
# CONFIG_MEDIA_CONTROLLER_DVB is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_ADV_DEBUG=y
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
# CONFIG_TTPCI_EEPROM is not set

#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
CONFIG_RADIO_SI476X=m
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
CONFIG_RADIO_MAXIRADIO=m
# CONFIG_RADIO_SHARK is not set
CONFIG_RADIO_SHARK2=m
CONFIG_USB_KEENE=m
CONFIG_USB_RAREMONO=m
CONFIG_USB_MA901=m
# CONFIG_RADIO_TEA5764 is not set
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_TEF6862=m
# CONFIG_RADIO_WL1273 is not set

#
# Texas Instruments WL128x FM driver (ST based)
#
CONFIG_CYPRESS_FIRMWARE=m

#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y

#
# Audio decoders, processors and mixers
#

#
# RDS decoders
#

#
# Video decoders
#

#
# Video and audio decoders
#

#
# Video encoders
#

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#

#
# Audio/Video compression chips
#

#
# Miscellaneous helper chips
#

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MC44S803=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_INTEL_GTT=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_USERPTR=y
CONFIG_DRM_AMDGPU=m
CONFIG_DRM_AMDGPU_SI=y
# CONFIG_DRM_AMDGPU_CIK is not set
# CONFIG_DRM_AMDGPU_USERPTR is not set
CONFIG_DRM_AMDGPU_GART_DEBUGFS=y

#
# ACP (Audio CoProcessor) Configuration
#
CONFIG_DRM_AMD_ACP=y
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
CONFIG_DRM_I915_USERPTR=y
# CONFIG_DRM_I915_GVT is not set
# CONFIG_DRM_VGEM is not set
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
# CONFIG_DRM_GMA500 is not set
CONFIG_DRM_UDL=m
# CONFIG_DRM_AST is not set
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_QXL=m
# CONFIG_DRM_BOCHS is not set
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_LEGACY is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=m
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
CONFIG_FB_CYBER2000=m
# CONFIG_FB_CYBER2000_DDC is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
CONFIG_FB_S1D13XXX=y
CONFIG_FB_NVIDIA=m
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_NVIDIA_DEBUG is not set
# CONFIG_FB_NVIDIA_BACKLIGHT is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
# CONFIG_FB_MATROX_MYSTIQUE is not set
# CONFIG_FB_MATROX_G is not set
# CONFIG_FB_MATROX_I2C is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
CONFIG_FB_RADEON_DEBUG=y
CONFIG_FB_ATY128=y
# CONFIG_FB_ATY128_BACKLIGHT is not set
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
# CONFIG_FB_ATY_BACKLIGHT is not set
CONFIG_FB_S3=y
CONFIG_FB_S3_DDC=y
CONFIG_FB_SAVAGE=y
CONFIG_FB_SAVAGE_I2C=y
# CONFIG_FB_SAVAGE_ACCEL is not set
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
# CONFIG_FB_SIS_315 is not set
CONFIG_FB_VIA=m
CONFIG_FB_VIA_DIRECT_PROCFS=y
CONFIG_FB_VIA_X_COMPATIBILITY=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=m
CONFIG_FB_ARK=y
CONFIG_FB_PM3=y
CONFIG_FB_CARMINE=m
# CONFIG_FB_CARMINE_DRAM_EVAL is not set
CONFIG_CARMINE_DRAM_CUSTOM=y
CONFIG_FB_SM501=y
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=m
# CONFIG_FB_MB862XX is not set
CONFIG_FB_BROADSHEET=m
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
CONFIG_FB_SM712=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_LM3533=m
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA9052=m
CONFIG_BACKLIGHT_MAX8925=m
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_PM8941_WLED is not set
CONFIG_BACKLIGHT_SAHARA=y
CONFIG_BACKLIGHT_WM831X=m
CONFIG_BACKLIGHT_ADP5520=y
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_ADP8870=m
# CONFIG_BACKLIGHT_PCF50633 is not set
# CONFIG_BACKLIGHT_AAT2870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
CONFIG_BACKLIGHT_LM3639=m
# CONFIG_BACKLIGHT_LP855X is not set
CONFIG_BACKLIGHT_LP8788=y
# CONFIG_BACKLIGHT_PANDORA is not set
# CONFIG_BACKLIGHT_SKY81452 is not set
CONFIG_BACKLIGHT_TPS65217=y
CONFIG_BACKLIGHT_AS3711=m
CONFIG_BACKLIGHT_GPIO=y
# CONFIG_BACKLIGHT_LV5207LP is not set
CONFIG_BACKLIGHT_BD6107=m
CONFIG_VGASTATE=y
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_COMPRESS_OFFLOAD=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
# CONFIG_SND_PCM_OSS_PLUGINS is not set
CONFIG_SND_PCM_TIMER=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
# CONFIG_SND_PCM_XRUN_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_PCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_EXT_CORE=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_SPI=y
# CONFIG_SND_USB is not set
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
# CONFIG_SND_DICE is not set
# CONFIG_SND_OXFW is not set
CONFIG_SND_ISIGHT=m
CONFIG_SND_FIREWORKS=m
CONFIG_SND_BEBOB=m
CONFIG_SND_FIREWIRE_DIGI00X=m
# CONFIG_SND_FIREWIRE_TASCAM is not set
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
CONFIG_SND_SOC=m
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_TOPOLOGY=y
CONFIG_SND_SOC_AMD_ACP=m
# CONFIG_SND_ATMEL_SOC is not set
CONFIG_SND_DESIGNWARE_I2S=m
CONFIG_SND_DESIGNWARE_PCM=m

#
# SoC Audio for Freescale CPUs
#

#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=m
CONFIG_SND_SOC_FSL_SAI=m
# CONFIG_SND_SOC_FSL_SSI is not set
CONFIG_SND_SOC_FSL_SPDIF=m
# CONFIG_SND_SOC_FSL_ESAI is not set
CONFIG_SND_SOC_IMX_AUDMUX=m
CONFIG_SND_SOC_IMG=y
CONFIG_SND_SOC_IMG_I2S_IN=m
# CONFIG_SND_SOC_IMG_I2S_OUT is not set
CONFIG_SND_SOC_IMG_PARALLEL_OUT=m
CONFIG_SND_SOC_IMG_SPDIF_IN=m
# CONFIG_SND_SOC_IMG_SPDIF_OUT is not set
# CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC is not set
CONFIG_SND_SST_MFLD_PLATFORM=m
CONFIG_SND_SST_IPC=m
CONFIG_SND_SST_IPC_ACPI=m
CONFIG_SND_SOC_INTEL_SST=m
CONFIG_SND_SOC_INTEL_SST_ACPI=m
CONFIG_SND_SOC_INTEL_SST_MATCH=m
CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=m
CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m
CONFIG_SND_SOC_INTEL_SKYLAKE=m
CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m
# CONFIG_SND_SOC_XTFPGA_I2S is not set
CONFIG_SND_SOC_I2C_AND_SPI=m

#
# CODEC drivers
#
CONFIG_SND_SOC_AC97_CODEC=m
# CONFIG_SND_SOC_ADAU1701 is not set
CONFIG_SND_SOC_ADAU7002=m
CONFIG_SND_SOC_AK4104=m
CONFIG_SND_SOC_AK4554=m
# CONFIG_SND_SOC_AK4613 is not set
# CONFIG_SND_SOC_AK4642 is not set
# CONFIG_SND_SOC_AK5386 is not set
CONFIG_SND_SOC_ALC5623=m
# CONFIG_SND_SOC_BT_SCO is not set
# CONFIG_SND_SOC_CS35L32 is not set
CONFIG_SND_SOC_CS35L33=m
# CONFIG_SND_SOC_CS42L51_I2C is not set
# CONFIG_SND_SOC_CS42L52 is not set
CONFIG_SND_SOC_CS42L56=m
CONFIG_SND_SOC_CS42L73=m
CONFIG_SND_SOC_CS4265=m
# CONFIG_SND_SOC_CS4270 is not set
CONFIG_SND_SOC_CS4271=m
CONFIG_SND_SOC_CS4271_I2C=m
# CONFIG_SND_SOC_CS4271_SPI is not set
# CONFIG_SND_SOC_CS42XX8_I2C is not set
CONFIG_SND_SOC_CS4349=m
CONFIG_SND_SOC_CS53L30=m
CONFIG_SND_SOC_DA7219=m
CONFIG_SND_SOC_DMIC=m
CONFIG_SND_SOC_HDMI_CODEC=m
CONFIG_SND_SOC_ES8328=m
CONFIG_SND_SOC_GTM601=m
CONFIG_SND_SOC_HDAC_HDMI=m
# CONFIG_SND_SOC_INNO_RK3036 is not set
CONFIG_SND_SOC_MAX98090=m
CONFIG_SND_SOC_MAX98357A=m
# CONFIG_SND_SOC_MAX98504 is not set
CONFIG_SND_SOC_MAX9860=m
CONFIG_SND_SOC_PCM1681=m
CONFIG_SND_SOC_PCM179X=m
CONFIG_SND_SOC_PCM179X_I2C=m
CONFIG_SND_SOC_PCM179X_SPI=m
CONFIG_SND_SOC_PCM3168A=m
# CONFIG_SND_SOC_PCM3168A_I2C is not set
CONFIG_SND_SOC_PCM3168A_SPI=m
CONFIG_SND_SOC_PCM512x=m
CONFIG_SND_SOC_PCM512x_I2C=m
CONFIG_SND_SOC_PCM512x_SPI=m
CONFIG_SND_SOC_RL6231=m
CONFIG_SND_SOC_RL6347A=m
CONFIG_SND_SOC_RT286=m
CONFIG_SND_SOC_RT298=m
CONFIG_SND_SOC_RT5616=m
# CONFIG_SND_SOC_RT5631 is not set
CONFIG_SND_SOC_RT5640=m
CONFIG_SND_SOC_RT5645=m
CONFIG_SND_SOC_RT5651=m
CONFIG_SND_SOC_RT5663=m
CONFIG_SND_SOC_RT5670=m
# CONFIG_SND_SOC_RT5677_SPI is not set
CONFIG_SND_SOC_SGTL5000=m
CONFIG_SND_SOC_SI476X=m
# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
# CONFIG_SND_SOC_SPDIF is not set
CONFIG_SND_SOC_SSM2602=m
CONFIG_SND_SOC_SSM2602_SPI=m
CONFIG_SND_SOC_SSM2602_I2C=m
CONFIG_SND_SOC_SSM4567=m
# CONFIG_SND_SOC_STA32X is not set
# CONFIG_SND_SOC_STA350 is not set
CONFIG_SND_SOC_STI_SAS=m
CONFIG_SND_SOC_TAS2552=m
CONFIG_SND_SOC_TAS5086=m
CONFIG_SND_SOC_TAS571X=m
CONFIG_SND_SOC_TAS5720=m
CONFIG_SND_SOC_TFA9879=m
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC23_I2C=m
# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
# CONFIG_SND_SOC_TLV320AIC31XX is not set
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_TS3A227E=m
# CONFIG_SND_SOC_WM8510 is not set
CONFIG_SND_SOC_WM8523=m
CONFIG_SND_SOC_WM8580=m
CONFIG_SND_SOC_WM8711=m
CONFIG_SND_SOC_WM8728=m
CONFIG_SND_SOC_WM8731=m
CONFIG_SND_SOC_WM8737=m
CONFIG_SND_SOC_WM8741=m
CONFIG_SND_SOC_WM8750=m
# CONFIG_SND_SOC_WM8753 is not set
CONFIG_SND_SOC_WM8770=m
CONFIG_SND_SOC_WM8776=m
CONFIG_SND_SOC_WM8804=m
# CONFIG_SND_SOC_WM8804_I2C is not set
CONFIG_SND_SOC_WM8804_SPI=m
# CONFIG_SND_SOC_WM8903 is not set
# CONFIG_SND_SOC_WM8960 is not set
CONFIG_SND_SOC_WM8962=m
CONFIG_SND_SOC_WM8974=m
# CONFIG_SND_SOC_WM8978 is not set
# CONFIG_SND_SOC_WM8985 is not set
CONFIG_SND_SOC_NAU8810=m
CONFIG_SND_SOC_NAU8825=m
CONFIG_SND_SOC_TPA6130A2=m
CONFIG_SND_SIMPLE_CARD_UTILS=m
CONFIG_SND_SIMPLE_CARD=m
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set
CONFIG_UHID=y
# CONFIG_HID_GENERIC is not set

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
CONFIG_HID_AUREAL=y
# CONFIG_HID_BELKIN is not set
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
# CONFIG_HID_CORSAIR is not set
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CMEDIA=y
# CONFIG_HID_CYPRESS is not set
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELECOM=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=y
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_WALTOP=y
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=y
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LED=y
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_LOGIG940_FF=y
# CONFIG_LOGIWHEELS_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PRIMAX=m
CONFIG_HID_SAITEK=y
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SPEEDLINK is not set
CONFIG_HID_STEELSERIES=m
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=y
# CONFIG_HID_THINGM is not set
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=y
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=y
CONFIG_HID_SENSOR_HUB=m
# CONFIG_HID_SENSOR_CUSTOM_SENSOR is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
# CONFIG_USB_HID is not set
CONFIG_HID_PID=y

#
# I2C HID support
#
# CONFIG_I2C_HID is not set

#
# Intel ISH HID support
#
CONFIG_INTEL_ISH_HID=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PLATFORM=m
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_PCI=m
CONFIG_USB_EHCI_HCD_PLATFORM=m
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1362_HCD=m
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_MAX3421_HCD=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_HCD_ISO is not set
# CONFIG_USB_SL811_CS is not set
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_WHCI_HCD=y
CONFIG_USB_HWA_HCD=y
CONFIG_USB_HCD_TEST_MODE=y

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=y
# CONFIG_USB_STORAGE_DATAFAB is not set
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_STORAGE_ENE_UB6250=y
CONFIG_USB_UAS=m

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
CONFIG_USB_MICROTEK=y
# CONFIG_USBIP_CORE is not set
CONFIG_USB_MUSB_HDRC=m
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not set
CONFIG_USB_MUSB_DUAL_ROLE=y

#
# Platform Glue Layer
#

#
# MUSB DMA mode
#
# CONFIG_MUSB_PIO_ONLY is not set
# CONFIG_USB_DWC3 is not set
CONFIG_USB_DWC2=y
CONFIG_USB_DWC2_HOST=y

#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
CONFIG_USB_DWC2_PCI=m
# CONFIG_USB_DWC2_DEBUG is not set
CONFIG_USB_DWC2_TRACK_MISSED_SOFS=y
CONFIG_USB_CHIPIDEA=m
CONFIG_USB_CHIPIDEA_PCI=m
# CONFIG_USB_CHIPIDEA_UDC is not set
CONFIG_USB_CHIPIDEA_HOST=y
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=y
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=m
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=y
CONFIG_USB_EHSET_TEST_FIXTURE=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=y
CONFIG_USB_HSIC_USB3503=m
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
CONFIG_USB_CHAOSKEY=m
CONFIG_UCSI=y

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=m
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_TAHVO_USB=m
# CONFIG_TAHVO_USB_HOST_BY_DEFAULT is not set
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
CONFIG_U_SERIAL_CONSOLE=y

#
# USB Peripheral Controller
#
CONFIG_USB_FOTG210_UDC=m
CONFIG_USB_GR_UDC=m
CONFIG_USB_R8A66597=m
CONFIG_USB_PXA27X=m
CONFIG_USB_MV_UDC=m
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
CONFIG_USB_BDC_UDC=m

#
# Platform Support
#
CONFIG_USB_BDC_PCI=m
# CONFIG_USB_AMD5536UDC is not set
CONFIG_USB_NET2272=m
# CONFIG_USB_NET2272_DMA is not set
# CONFIG_USB_NET2280 is not set
CONFIG_USB_GOKU=m
# CONFIG_USB_EG20T is not set
CONFIG_USB_DUMMY_HCD=m
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_ACM=m
CONFIG_USB_U_SERIAL=m
CONFIG_USB_F_SERIAL=m
CONFIG_USB_F_OBEX=m
CONFIG_USB_F_MASS_STORAGE=m
CONFIG_USB_F_FS=m
CONFIG_USB_F_UAC1=m
CONFIG_USB_F_MIDI=m
CONFIG_USB_F_PRINTER=m
CONFIG_USB_CONFIGFS=m
CONFIG_USB_CONFIGFS_SERIAL=y
# CONFIG_USB_CONFIGFS_ACM is not set
CONFIG_USB_CONFIGFS_OBEX=y
# CONFIG_USB_CONFIGFS_NCM is not set
# CONFIG_USB_CONFIGFS_ECM is not set
# CONFIG_USB_CONFIGFS_ECM_SUBSET is not set
# CONFIG_USB_CONFIGFS_RNDIS is not set
# CONFIG_USB_CONFIGFS_EEM is not set
# CONFIG_USB_CONFIGFS_MASS_STORAGE is not set
# CONFIG_USB_CONFIGFS_F_LB_SS is not set
# CONFIG_USB_CONFIGFS_F_FS is not set
CONFIG_USB_CONFIGFS_F_UAC1=y
# CONFIG_USB_CONFIGFS_F_UAC2 is not set
CONFIG_USB_CONFIGFS_F_MIDI=y
# CONFIG_USB_CONFIGFS_F_HID is not set
# CONFIG_USB_CONFIGFS_F_UVC is not set
CONFIG_USB_CONFIGFS_F_PRINTER=y
# CONFIG_USB_ZERO is not set
CONFIG_USB_AUDIO=m
CONFIG_GADGET_UAC1=y
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FUNCTIONFS=m
# CONFIG_USB_FUNCTIONFS_ETH is not set
# CONFIG_USB_FUNCTIONFS_RNDIS is not set
CONFIG_USB_FUNCTIONFS_GENERIC=y
# CONFIG_USB_MASS_STORAGE is not set
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
CONFIG_USB_G_PRINTER=m
# CONFIG_USB_CDC_COMPOSITE is not set
CONFIG_USB_G_ACM_MS=m
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
CONFIG_USB_G_DBGP=m
# CONFIG_USB_G_DBGP_PRINTK is not set
CONFIG_USB_G_DBGP_SERIAL=y
# CONFIG_USB_G_WEBCAM is not set
# CONFIG_USB_LED_TRIG is not set
CONFIG_USB_ULPI_BUS=y
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
CONFIG_UWB_I1480U=y
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=y

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_WBSD=m
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_GOLDFISH is not set
CONFIG_MMC_SPI=m
CONFIG_MMC_SDRICOH_CS=y
CONFIG_MMC_CB710=y
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
CONFIG_MMC_USDHI6ROL0=m
# CONFIG_MMC_REALTEK_PCI is not set
# CONFIG_MMC_REALTEK_USB is not set
CONFIG_MMC_TOSHIBA_PCI=m
CONFIG_MMC_MTK=y
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
# CONFIG_MEMSTICK_R592 is not set
# CONFIG_MEMSTICK_REALTEK_PCI is not set
# CONFIG_MEMSTICK_REALTEK_USB is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set

#
# LED drivers
#
CONFIG_LEDS_LM3530=y
# CONFIG_LEDS_LM3533 is not set
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_PCA9532=m
# CONFIG_LEDS_PCA9532_GPIO is not set
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP55XX_COMMON=y
# CONFIG_LEDS_LP5521 is not set
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=m
CONFIG_LEDS_LP8501=y
# CONFIG_LEDS_LP8788 is not set
CONFIG_LEDS_LP8860=m
CONFIG_LEDS_CLEVO_MAIL=y
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_WM831X_STATUS=y
CONFIG_LEDS_WM8350=m
CONFIG_LEDS_DA9052=m
CONFIG_LEDS_DAC124S085=m
# CONFIG_LEDS_PWM is not set
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_ADP5520=m
# CONFIG_LEDS_MC13783 is not set
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_TLC591XX=m
CONFIG_LEDS_LM355x=y

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
CONFIG_LEDS_MLXCPLD=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_DISK=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=y

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM80X=m
CONFIG_RTC_DRV_ABB5ZES3=y
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1307_HWMON is not set
CONFIG_RTC_DRV_DS1307_CENTURY=y
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_LP8788=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_MAX8925=y
# CONFIG_RTC_DRV_RS5C372 is not set
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_ISL12022=y
# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8010=m
# CONFIG_RTC_DRV_RX8581 is not set
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV8803=y
# CONFIG_RTC_DRV_S5M is not set

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=m
# CONFIG_RTC_DRV_M41T94 is not set
CONFIG_RTC_DRV_DS1302=m
# CONFIG_RTC_DRV_DS1305 is not set
CONFIG_RTC_DRV_DS1343=y
CONFIG_RTC_DRV_DS1347=m
CONFIG_RTC_DRV_DS1390=y
CONFIG_RTC_DRV_MAX6916=y
CONFIG_RTC_DRV_R9701=y
# CONFIG_RTC_DRV_RX4581 is not set
CONFIG_RTC_DRV_RX6110=m
# CONFIG_RTC_DRV_RS5C348 is not set
CONFIG_RTC_DRV_MAX6902=m
# CONFIG_RTC_DRV_PCF2123 is not set
CONFIG_RTC_DRV_MCP795=m
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
CONFIG_RTC_DRV_PCF2127=y
CONFIG_RTC_DRV_RV3029C2=y
CONFIG_RTC_DRV_RV3029_HWMON=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1685_FAMILY=y
# CONFIG_RTC_DRV_DS1685 is not set
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
CONFIG_RTC_DRV_DS17485=y
# CONFIG_RTC_DRV_DS17885 is not set
CONFIG_RTC_DS1685_PROC_REGS=y
CONFIG_RTC_DS1685_SYSFS_REGS=y
# CONFIG_RTC_DRV_DS1742 is not set
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_DA9052=m
# CONFIG_RTC_DRV_DA9055 is not set
# CONFIG_RTC_DRV_DA9063 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=y
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
CONFIG_RTC_DRV_BQ4802=y
# CONFIG_RTC_DRV_RP5C01 is not set
CONFIG_RTC_DRV_V3020=m
# CONFIG_RTC_DRV_WM831X is not set
# CONFIG_RTC_DRV_WM8350 is not set
CONFIG_RTC_DRV_PCF50633=y

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_MT6397=m

#
# HID Sensor RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_INTEL_IDMA64=y
# CONFIG_INTEL_IOATDMA is not set
CONFIG_QCOM_HIDMA_MGMT=m
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=y
# CONFIG_DW_DMAC is not set
CONFIG_DW_DMAC_PCI=y
CONFIG_HSU_DMA=y

#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
CONFIG_DMATEST=m

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
CONFIG_UIO_PRUSS=m
CONFIG_UIO_MF624=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
CONFIG_STAGING=y
# CONFIG_SLICOSS is not set
CONFIG_COMEDI=m
# CONFIG_COMEDI_DEBUG is not set
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
CONFIG_COMEDI_BOND=m
CONFIG_COMEDI_TEST=m
# CONFIG_COMEDI_PARPORT is not set
CONFIG_COMEDI_SERIAL2002=m
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_PCL711=m
# CONFIG_COMEDI_PCL724 is not set
CONFIG_COMEDI_PCL726=m
CONFIG_COMEDI_PCL730=m
CONFIG_COMEDI_PCL812=m
CONFIG_COMEDI_PCL816=m
CONFIG_COMEDI_PCL818=m
CONFIG_COMEDI_PCM3724=m
CONFIG_COMEDI_AMPLC_DIO200_ISA=m
# CONFIG_COMEDI_AMPLC_PC236_ISA is not set
CONFIG_COMEDI_AMPLC_PC263_ISA=m
# CONFIG_COMEDI_RTI800 is not set
# CONFIG_COMEDI_RTI802 is not set
CONFIG_COMEDI_DAC02=m
# CONFIG_COMEDI_DAS16M1 is not set
CONFIG_COMEDI_DAS08_ISA=m
CONFIG_COMEDI_DAS16=m
# CONFIG_COMEDI_DAS800 is not set
CONFIG_COMEDI_DAS1800=m
CONFIG_COMEDI_DAS6402=m
CONFIG_COMEDI_DT2801=m
# CONFIG_COMEDI_DT2811 is not set
CONFIG_COMEDI_DT2814=m
CONFIG_COMEDI_DT2815=m
CONFIG_COMEDI_DT2817=m
CONFIG_COMEDI_DT282X=m
CONFIG_COMEDI_DMM32AT=m
CONFIG_COMEDI_FL512=m
CONFIG_COMEDI_AIO_AIO12_8=m
CONFIG_COMEDI_AIO_IIRO_16=m
CONFIG_COMEDI_II_PCI20KC=m
# CONFIG_COMEDI_C6XDIGIO is not set
CONFIG_COMEDI_MPC624=m
CONFIG_COMEDI_ADQ12B=m
CONFIG_COMEDI_NI_AT_A2150=m
# CONFIG_COMEDI_NI_AT_AO is not set
CONFIG_COMEDI_NI_ATMIO=m
# CONFIG_COMEDI_NI_ATMIO16D is not set
# CONFIG_COMEDI_NI_LABPC_ISA is not set
CONFIG_COMEDI_PCMAD=m
# CONFIG_COMEDI_PCMDA12 is not set
CONFIG_COMEDI_PCMMIO=m
CONFIG_COMEDI_PCMUIO=m
CONFIG_COMEDI_MULTIQ3=m
CONFIG_COMEDI_S526=m
# CONFIG_COMEDI_PCI_DRIVERS is not set
CONFIG_COMEDI_PCMCIA_DRIVERS=m
CONFIG_COMEDI_CB_DAS16_CS=m
CONFIG_COMEDI_DAS08_CS=m
# CONFIG_COMEDI_NI_DAQ_700_CS is not set
# CONFIG_COMEDI_NI_DAQ_DIO24_CS is not set
CONFIG_COMEDI_NI_LABPC_CS=m
CONFIG_COMEDI_NI_MIO_CS=m
CONFIG_COMEDI_QUATECH_DAQP_CS=m
CONFIG_COMEDI_USB_DRIVERS=m
# CONFIG_COMEDI_DT9812 is not set
# CONFIG_COMEDI_NI_USB6501 is not set
# CONFIG_COMEDI_USBDUX is not set
# CONFIG_COMEDI_USBDUXFAST is not set
# CONFIG_COMEDI_USBDUXSIGMA is not set
# CONFIG_COMEDI_VMK80XX is not set
CONFIG_COMEDI_8254=m
CONFIG_COMEDI_8255=m
CONFIG_COMEDI_8255_SA=m
CONFIG_COMEDI_KCOMEDILIB=m
CONFIG_COMEDI_AMPLC_DIO200=m
CONFIG_COMEDI_DAS08=m
CONFIG_COMEDI_ISADMA=m
CONFIG_COMEDI_NI_LABPC=m
CONFIG_COMEDI_NI_TIO=m
CONFIG_RTS5208=y
# CONFIG_FB_SM750 is not set
# CONFIG_FB_XGI is not set

#
# Speakup console speech
#
CONFIG_SPEAKUP=y
CONFIG_SPEAKUP_SYNTH_ACNTSA=y
# CONFIG_SPEAKUP_SYNTH_APOLLO is not set
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
# CONFIG_SPEAKUP_SYNTH_BNS is not set
CONFIG_SPEAKUP_SYNTH_DECTLK=m
CONFIG_SPEAKUP_SYNTH_DECEXT=m
# CONFIG_SPEAKUP_SYNTH_LTLK is not set
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=y
# CONFIG_SPEAKUP_SYNTH_TXPRT is not set
CONFIG_SPEAKUP_SYNTH_DUMMY=y
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
CONFIG_ASHMEM=y
# CONFIG_ANDROID_LOW_MEMORY_KILLER is not set
CONFIG_ION=y
# CONFIG_ION_TEST is not set
# CONFIG_ION_DUMMY is not set
# CONFIG_LTE_GDM724X is not set
CONFIG_FIREWIRE_SERIAL=m
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
CONFIG_GOLDFISH_AUDIO=m
CONFIG_DGNC=m
# CONFIG_GS_FPGABOOT is not set
CONFIG_CRYPTO_SKEIN=m
CONFIG_UNISYSSPAR=y
CONFIG_UNISYS_VISORBUS=y
# CONFIG_UNISYS_VISORNIC is not set
CONFIG_UNISYS_VISORINPUT=y
# CONFIG_UNISYS_VISORHBA is not set
# CONFIG_FB_TFT is not set
CONFIG_MOST=y
CONFIG_MOSTCORE=y
CONFIG_AIM_CDEV=m
# CONFIG_AIM_NETWORK is not set
CONFIG_AIM_SOUND=m
CONFIG_AIM_V4L2=m
CONFIG_HDM_I2C=m
# CONFIG_HDM_USB is not set
# CONFIG_KS7010 is not set
# CONFIG_GREYBUS is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACERHDF=m
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_FUJITSU_LAPTOP is not set
CONFIG_FUJITSU_TABLET=m
CONFIG_HP_ACCEL=y
CONFIG_HP_WIRELESS=y
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
CONFIG_SENSORS_HDAPS=m
CONFIG_EEEPC_LAPTOP=m
CONFIG_ASUS_WIRELESS=y
# CONFIG_ACPI_WMI is not set
CONFIG_TOPSTAR_LAPTOP=y
# CONFIG_TOSHIBA_BT_RFKILL is not set
CONFIG_TOSHIBA_HAPS=m
# CONFIG_ACPI_CMPC is not set
CONFIG_INTEL_HID_EVENT=y
# CONFIG_INTEL_VBTN is not set
CONFIG_INTEL_IPS=y
CONFIG_INTEL_PMC_CORE=y
CONFIG_IBM_RTL=y
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_SAMSUNG_Q10 is not set
CONFIG_APPLE_GMUX=m
CONFIG_INTEL_RST=y
CONFIG_INTEL_SMARTCONNECT=m
CONFIG_PVPANIC=m
CONFIG_INTEL_PMC_IPC=y
CONFIG_SURFACE_PRO3_BUTTON=y
CONFIG_INTEL_PUNIT_IPC=y
CONFIG_INTEL_TELEMETRY=m
# CONFIG_GOLDFISH_BUS is not set
CONFIG_GOLDFISH_PIPE=y
CONFIG_CHROME_PLATFORMS=y
# CONFIG_CHROMEOS_LAPTOP is not set
# CONFIG_CHROMEOS_PSTORE is not set
CONFIG_CROS_EC_CHARDEV=m
CONFIG_CROS_EC_LPC=m
CONFIG_CROS_EC_PROTO=y
CONFIG_CROS_KBD_LED_BACKLIGHT=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
CONFIG_COMMON_CLK_WM831X=y
CONFIG_COMMON_CLK_SCPI=m
CONFIG_COMMON_CLK_SI5351=m
CONFIG_COMMON_CLK_CDCE706=y
CONFIG_COMMON_CLK_CS2000_CP=y
CONFIG_COMMON_CLK_S2MPS11=m
# CONFIG_CLK_TWL6040 is not set
# CONFIG_COMMON_CLK_NXP is not set
CONFIG_COMMON_CLK_PWM=m
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
# CONFIG_COMMON_CLK_MT8135 is not set
# CONFIG_COMMON_CLK_MT8173 is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
# CONFIG_PCC is not set
CONFIG_ALTERA_MBOX=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IOVA=m
# CONFIG_AMD_IOMMU is not set
CONFIG_DMAR_TABLE=y
# CONFIG_INTEL_IOMMU is not set
CONFIG_IRQ_REMAP=y

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=m
CONFIG_STE_MODEM_RPROC=m

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#

#
# Broadcom SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_EXTCON_ARIZONA=m
CONFIG_EXTCON_AXP288=m
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX77843=m
CONFIG_EXTCON_QCOM_SPMI_MISC=m
CONFIG_EXTCON_RT8973A=y
# CONFIG_EXTCON_SM5502 is not set
CONFIG_EXTCON_USB_GPIO=y
CONFIG_MEMORY=y
# CONFIG_IIO is not set
CONFIG_NTB=m
# CONFIG_NTB_AMD is not set
# CONFIG_NTB_INTEL is not set
CONFIG_NTB_PINGPONG=m
CONFIG_NTB_TOOL=m
CONFIG_NTB_PERF=m
CONFIG_NTB_TRANSPORT=m
CONFIG_VME_BUS=y

#
# VME Bridge Drivers
#
CONFIG_VME_CA91CX42=m
CONFIG_VME_TSI148=y
CONFIG_VME_FAKE=y

#
# VME Board Drivers
#
CONFIG_VMIVME_7805=y

#
# VME Device Drivers
#
CONFIG_VME_USER=m
# CONFIG_VME_PIO2 is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_CROS_EC=m
CONFIG_PWM_LP3943=m
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PCI=y
CONFIG_PWM_LPSS_PLATFORM=y
# CONFIG_PWM_PCA9685 is not set
CONFIG_PWM_TWL=y
# CONFIG_PWM_TWL_LED is not set
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_IPACK_BUS=y
CONFIG_BOARD_TPCI200=m
CONFIG_SERIAL_IPOCTAL=m
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STM32 is not set
# CONFIG_RESET_SUNXI is not set
# CONFIG_TI_SYSCON_RESET is not set
# CONFIG_RESET_ZYNQ is not set
CONFIG_FMC=m
CONFIG_FMC_FAKEDEV=m
# CONFIG_FMC_TRIVIAL is not set
CONFIG_FMC_WRITE_EEPROM=m
# CONFIG_FMC_CHARDEV is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
CONFIG_PHY_PXA_28NM_USB2=y
CONFIG_BCM_KONA_USB2_PHY=y
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_PHY_TUSB1210 is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RAS=y
CONFIG_THUNDERBOLT=m

#
# Android
#
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
# CONFIG_LIBNVDIMM is not set
CONFIG_DEV_DAX=m
CONFIG_NR_DEV_DAX=32768
CONFIG_NVMEM=y
CONFIG_STM=y
CONFIG_STM_DUMMY=m
# CONFIG_STM_SOURCE_CONSOLE is not set
CONFIG_STM_SOURCE_HEARTBEAT=m
# CONFIG_INTEL_TH is not set

#
# FPGA Configuration Support
#
CONFIG_FPGA=y

#
# Firmware Drivers
#
CONFIG_ARM_SCPI_PROTOCOL=m
CONFIG_ARM_SCPI_POWER_DOMAIN=m
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=y
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not set
CONFIG_FW_CFG_SYSFS=m
CONFIG_FW_CFG_SYSFS_CMDLINE=y
CONFIG_GOOGLE_FIRMWARE=y

#
# Google Firmware Drivers
#
CONFIG_GOOGLE_SMI=y
CONFIG_GOOGLE_MEMCONSOLE=y

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
CONFIG_EFI_CAPSULE_LOADER=m
CONFIG_EFI_TEST=m
CONFIG_UEFI_CPER=y

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
CONFIG_XFS_WARN=y
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_NILFS2_FS=y
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
# CONFIG_F2FS_FS_XATTR is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_IO_TRACE is not set
CONFIG_F2FS_FAULT_INJECTION=y
CONFIG_FS_DAX=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_OVERLAY_FS=m

#
# Caches
#
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
CONFIG_FSCACHE_HISTOGRAM=y
CONFIG_FSCACHE_DEBUG=y
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=y
CONFIG_CACHEFILES_DEBUG=y
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=m
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=m
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=m
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=m
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=m
# CONFIG_NLS_MAC_CROATIAN is not set
CONFIG_NLS_MAC_CYRILLIC=m
# CONFIG_NLS_MAC_GAELIC is not set
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=m

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=8192
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_READABLE_ASM=y
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_STACK_VALIDATION is not set
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
CONFIG_PAGE_POISONING=y
# CONFIG_PAGE_POISONING_NO_SANITY is not set
CONFIG_PAGE_POISONING_ZERO=y
CONFIG_DEBUG_PAGE_REF=y
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
# CONFIG_DEBUG_OBJECTS_FREE is not set
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_KASAN=y
CONFIG_KASAN_OUTLINE=y
# CONFIG_KASAN_INLINE is not set
# CONFIG_TEST_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHED_INFO is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_DEBUG_TIMEKEEPING=y
# CONFIG_TIMER_STATS is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_KOBJECT_RELEASE is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_DEBUG_SG is not set
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
# CONFIG_PROVE_RCU_REPEATEDLY is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_TORTURE_TEST=y
# CONFIG_RCU_PERF_TEST is not set
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT=y
CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT_DELAY=3
CONFIG_RCU_TORTURE_TEST_SLOW_INIT=y
CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY=3
# CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
CONFIG_FAIL_PAGE_ALLOC=y
# CONFIG_FAIL_MAKE_REQUEST is not set
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_FAIL_FUTEX is not set
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not set
CONFIG_IRQSOFF_TRACER=y
CONFIG_SCHED_TRACER=y
# CONFIG_HWLAT_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_UPROBE_EVENT is not set
# CONFIG_PROBE_EVENTS is not set
# CONFIG_DYNAMIC_FTRACE is not set
# CONFIG_FUNCTION_PROFILER is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
# CONFIG_HIST_TRIGGERS is not set
CONFIG_MMIOTRACE_TEST=m
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=y
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_ENUM_MAP_FILE is not set
CONFIG_TRACING_EVENTS_GPIO=y

#
# Runtime Testing
#
CONFIG_LKDTM=m
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=m
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_TEST_HEXDUMP is not set
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=y
CONFIG_TEST_BITMAP=y
CONFIG_TEST_UUID=y
CONFIG_TEST_RHASHTABLE=m
CONFIG_TEST_HASH=m
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
CONFIG_TEST_USER_COPY=m
# CONFIG_TEST_BPF is not set
CONFIG_TEST_FIRMWARE=y
# CONFIG_TEST_UDELAY is not set
CONFIG_MEMTEST=y
CONFIG_TEST_STATIC_KEYS=m
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
CONFIG_UBSAN=y
# CONFIG_UBSAN_SANITIZE_ALL is not set
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN_NULL is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_EFI=y
CONFIG_X86_PTDUMP_CORE=y
CONFIG_X86_PTDUMP=m
CONFIG_EFI_PGT_DUMP=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_DEBUG_WX=y
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_DOUBLEFAULT=y
CONFIG_DEBUG_TLBFLUSH=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_PATH=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY=y
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
CONFIG_SECURITY_LOADPIN=y
# CONFIG_SECURITY_LOADPIN_ENABLED is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_INTEGRITY is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECDH=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_MCRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=y

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_CRC32=m
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_POLY1305_X86_64=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=m
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=m
# CONFIG_CRYPTO_SHA1_MB is not set
# CONFIG_CRYPTO_SHA256_MB is not set
# CONFIG_CRYPTO_SHA512_MB is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_BLOWFISH_X86_64=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_CAST6_AVX_X86_64=y
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_DES3_EDE_X86_64=m
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_SALSA20_X86_64=y
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CHACHA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
CONFIG_CRYPTO_SERPENT_AVX_X86_64=y
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
CONFIG_CRYPTO_LZ4=y
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
# CONFIG_CRYPTO_DEV_PADLOCK_SHA is not set
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=y
# CONFIG_CRYPTO_DEV_CCP_CRYPTO is not set
CONFIG_CRYPTO_DEV_QAT=y
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
CONFIG_CRYPTO_DEV_QAT_C3XXX=y
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
CONFIG_CRYPTO_DEV_QAT_C62XVF=y

#
# Certificates for signature checking
#
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_VHOST_NET is not set
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_CRC8=m
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
CONFIG_RANDOM32_SELFTEST=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
CONFIG_DDR=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y

[-- Attachment #3: job-script.ksh --]
[-- Type: text/plain, Size: 4054 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='boot'
	export testcase='boot'
	export timeout='10m'
	export job_origin='/lkp/lkp/src/jobs/boot.yaml'
	export queue='bisect'
	export testbox='vm-intel12-yocto-x86_64-5'
	export tbox_group='vm-intel12-yocto-x86_64'
	export branch='linux-devel/devel-spot-201611031708'
	export commit='c6908ba082e8e4ecc5427550ac8c5d70f6f5ae10'
	export kconfig='x86_64-randconfig-ne0-11031841'
	export submit_id='581c33a00b9a93ecf56367d9'
	export job_file='/lkp/scheduled/vm-intel12-yocto-x86_64-5/boot-1-yocto-minimal-x86_64-2016-04-22.cgz-c6908ba082e8e4ecc5427550ac8c5d70f6f5ae10-20161104-60661-1v1ijcu-0.yaml'
	export id='968681e0fd7d3f38c7ded5e340edce52b3aa303a'
	export model='qemu-system-x86_64 -enable-kvm -cpu Nehalem'
	export nr_vm=12
	export nr_cpu=2
	export memory='512M'
	export rootfs='yocto-minimal-x86_64-2016-04-22.cgz'
	export hdd_partitions='/dev/vda'
	export swap_partitions='/dev/vdb'
	export need_kconfig='CONFIG_KVM_GUEST=y'
	export compiler='gcc-6'
	export enqueue_time='2016-11-04 15:07:13 +0800'
	export _id='581c33a00b9a93ecf56367d9'
	export user='lkp'
	export result_root='/result/boot/1/vm-intel12-yocto-x86_64/yocto-minimal-x86_64-2016-04-22.cgz/x86_64-randconfig-ne0-11031841/gcc-6/c6908ba082e8e4ecc5427550ac8c5d70f6f5ae10/0'
	export LKP_SERVER='inn'
	export max_uptime=600
	export initrd='/osimage/yocto/yocto-minimal-x86_64-2016-04-22.cgz'
	export bootloader_append='root=/dev/ram0
user=lkp
job=/lkp/scheduled/vm-intel12-yocto-x86_64-5/boot-1-yocto-minimal-x86_64-2016-04-22.cgz-c6908ba082e8e4ecc5427550ac8c5d70f6f5ae10-20161104-60661-1v1ijcu-0.yaml
ARCH=x86_64
kconfig=x86_64-randconfig-ne0-11031841
branch=linux-devel/devel-spot-201611031708
commit=c6908ba082e8e4ecc5427550ac8c5d70f6f5ae10
BOOT_IMAGE=/pkg/linux/x86_64-randconfig-ne0-11031841/gcc-6/c6908ba082e8e4ecc5427550ac8c5d70f6f5ae10/vmlinuz-4.9.0-rc1-00021-gc6908ba
max_uptime=600
RESULT_ROOT=/result/boot/1/vm-intel12-yocto-x86_64/yocto-minimal-x86_64-2016-04-22.cgz/x86_64-randconfig-ne0-11031841/gcc-6/c6908ba082e8e4ecc5427550ac8c5d70f6f5ae10/0
LKP_SERVER=inn
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
systemd.log_level=err
ignore_loglevel
earlyprintk=ttyS0,115200
console=ttyS0,115200
console=tty0
vga=normal
rw'
	export lkp_initrd='/lkp/lkp/lkp-x86_64.cgz'
	export modules_initrd='/pkg/linux/x86_64-randconfig-ne0-11031841/gcc-6/c6908ba082e8e4ecc5427550ac8c5d70f6f5ae10/modules.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export kernel='/pkg/linux/x86_64-randconfig-ne0-11031841/gcc-6/c6908ba082e8e4ecc5427550ac8c5d70f6f5ae10/vmlinuz-4.9.0-rc1-00021-gc6908ba'
	export dequeue_time='2016-11-04 15:24:49 +0800'
	export job_initrd='/lkp/scheduled/vm-intel12-yocto-x86_64-5/boot-1-yocto-minimal-x86_64-2016-04-22.cgz-c6908ba082e8e4ecc5427550ac8c5d70f6f5ae10-20161104-60661-1v1ijcu-0.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-slabinfo
	run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-meminfo
	run_monitor $LKP_SRC/monitors/one-shot/wrapper memmap
	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog
	run_monitor $LKP_SRC/monitors/wrapper nfs-hang

	run_test $LKP_SRC/tests/wrapper sleep 1
}

extract_stats()
{
	$LKP_SRC/stats/wrapper boot-slabinfo
	$LKP_SRC/stats/wrapper boot-meminfo
	$LKP_SRC/stats/wrapper memmap
	$LKP_SRC/stats/wrapper boot-memory
	$LKP_SRC/stats/wrapper boot-time
	$LKP_SRC/stats/wrapper kernel-size
	$LKP_SRC/stats/wrapper kmsg

	$LKP_SRC/stats/wrapper time sleep.time
	$LKP_SRC/stats/wrapper time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper last_state
}

"$@"

[-- Attachment #4: dmesg.xz --]
[-- Type: application/octet-stream, Size: 12680 bytes --]