* [PATCH 0/5] ARM: dts: imx: update Boundary Devices boards support
@ 2016-10-25 21:19 ` Gary Bisson
0 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-10-25 21:19 UTC (permalink / raw)
To: devicetree
Cc: fabio.estevam, linux, Gary Bisson, robh+dt, kernel, shawnguo,
linux-arm-kernel
Hi all,
This series includes several patches to update the support for our platforms.
Here are the main goals of this series:
1- Adding support for our latest SOM (SOM2)
2- Fix panel naming consistency across the boards
-> This way our U-Boot bootscript[1] can easily set the panel compatible.
3- Fix USB PHY reset for some boards
-> U-Boot used to always set the reset pin whether usb was used or not.
Anyway, the kernel should not be dependent on the bootloader.
Let me know if you have any question.
Regards,
Gary
[1] https://github.com/boundarydevices/u-boot-imx6/blob/boundary-v2016.03/board/boundary/nitrogen6x/6x_bootscript-mainline.txt
Gary Bisson (5):
ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support
ARM: dts: imx6qdl-sabrelite: rename panel nodes
ARM: dts: imx6qdl-sabrelite: add missing USB PHY reset control
ARM: dts: imx6qdl-nitrogen6x: rename panel nodes
ARM: dts: imx6qdl-nitrogen6x: add missing USB PHY reset control
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-nitrogen6_som2.dts | 53 ++
arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 770 ++++++++++++++++++++++++++
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 24 +-
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 24 +-
5 files changed, 868 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
--
2.9.3
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH 0/5] ARM: dts: imx: update Boundary Devices boards support
@ 2016-10-25 21:19 ` Gary Bisson
0 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-10-25 21:19 UTC (permalink / raw)
To: linux-arm-kernel
Hi all,
This series includes several patches to update the support for our platforms.
Here are the main goals of this series:
1- Adding support for our latest SOM (SOM2)
2- Fix panel naming consistency across the boards
-> This way our U-Boot bootscript[1] can easily set the panel compatible.
3- Fix USB PHY reset for some boards
-> U-Boot used to always set the reset pin whether usb was used or not.
Anyway, the kernel should not be dependent on the bootloader.
Let me know if you have any question.
Regards,
Gary
[1] https://github.com/boundarydevices/u-boot-imx6/blob/boundary-v2016.03/board/boundary/nitrogen6x/6x_bootscript-mainline.txt
Gary Bisson (5):
ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support
ARM: dts: imx6qdl-sabrelite: rename panel nodes
ARM: dts: imx6qdl-sabrelite: add missing USB PHY reset control
ARM: dts: imx6qdl-nitrogen6x: rename panel nodes
ARM: dts: imx6qdl-nitrogen6x: add missing USB PHY reset control
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-nitrogen6_som2.dts | 53 ++
arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 770 ++++++++++++++++++++++++++
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 24 +-
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 24 +-
5 files changed, 868 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
--
2.9.3
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH 1/5] ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support
2016-10-25 21:19 ` Gary Bisson
@ 2016-10-25 21:19 ` Gary Bisson
-1 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-10-25 21:19 UTC (permalink / raw)
To: devicetree
Cc: fabio.estevam, linux, Gary Bisson, robh+dt, kernel, shawnguo,
linux-arm-kernel
SoM based on i.MX6 Quad with 1GB of DDR3.
https://boundarydevices.com/product/nit6x-som-v2/
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-nitrogen6_som2.dts | 53 ++
arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 770 ++++++++++++++++++++++++++
3 files changed, 824 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 191807c..5647cc1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -386,6 +386,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-marsboard.dtb \
imx6q-nitrogen6x.dtb \
imx6q-nitrogen6_max.dtb \
+ imx6q-nitrogen6_som2.dtb \
imx6q-novena.dtb \
imx6q-phytec-pbab01.dtb \
imx6q-rex-pro.dtb \
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
new file mode 100644
index 0000000..cf4feef
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6_som2.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX6 Quad Nitrogen6_SOM2 Board";
+ compatible = "boundary,imx6q-nitrogen6_som2", "fsl,imx6q";
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
new file mode 100644
index 0000000..76f9b2a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -0,0 +1,770 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ backlight_lcd: backlight_lcd {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ backlight_lvds0: backlight_lvds0 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ backlight_lvds1: backlight_lvds1 {
+ compatible = "gpio-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight_lvds1>;
+ gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ default-on;
+ status = "okay";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+
+ menu {
+ label = "Menu";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ };
+
+ home {
+ label = "Home";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ };
+
+ back {
+ label = "Back";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ lcd_display: display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_j15>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ panel_lcd {
+ compatible = "okaya,rs800480t-7x0gp";
+ backlight = <&backlight_lcd>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
+ panel_lvds0 {
+ compatible = "hannstar,hsd100pxn1";
+ backlight = <&backlight_lvds0>;
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ panel_lvds1 {
+ compatible = "hannstar,hsd100pxn1";
+ backlight = <&backlight_lvds1>;
+
+ port {
+ panel_in_lvds1: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+ };
+
+ reg_1p8v: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_2p5v: regulator-2v5 {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_can_xcvr: regulator-can-xcvr {
+ compatible = "regulator-fixed";
+ regulator-name = "CAN XCVR";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_xcvr>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_usb_h1_vbus: regulator-usb-h1-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_wlan_vmmc: regulator-wlan-vmmc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wlan_vmmc>;
+ regulator-name = "reg_wlan_vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ sound {
+ compatible = "fsl,imx6q-nitrogen6_som2-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-nitrogen6_som2-sgtl5000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgtl5000>;
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <3>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ xceiver-supply = <®_can_xcvr>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ compatible = "microchip,sst25vf016b";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,err006687-workaround-present;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+
+ rtc@68 {
+ compatible = "st,rv4162";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rv4162>;
+ reg = <0x68>;
+ interrupts-extended = <&gpio6 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ touchscreen@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ touchscreen@38 {
+ compatible = "edt,edt-ft5x06";
+ reg = <0x38>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&iomuxc {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_backlight_lvds1: backlight-lvds1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x0b0b0
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_can_xcvr: can-xcvrgrp {
+ fsl,pins = <
+ /* Flexcan XCVR enable */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0b0b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x130b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x030b0
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ >;
+ };
+
+ pinctrl_gpio_keys: gpio_keysgrp {
+ fsl,pins = <
+ /* Power Button */
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+ /* Menu Button */
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+ /* Home Button */
+ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
+ /* Back Button */
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+ /* Volume Up Button */
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
+ /* Volume Down Button */
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c3mux: i2c3muxgrp {
+ fsl,pins = <
+ /* PCIe I2C enable */
+ MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x000b0
+ >;
+ };
+
+ pinctrl_j15: j15grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ /* PCIe reset */
+ MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x030b0
+ MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x030b0
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x030b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x030b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x030b1
+ >;
+ };
+
+ pinctrl_rv4162: rv4162grp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
+ >;
+ };
+
+ pinctrl_sgtl5000: sgtl5000grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x130b0
+ MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x130b0
+ MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x130b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x030b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10071
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17071
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17071
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17071
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17071
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17071
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_wlan_vmmc: wlan_vmmcgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x100b0
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x030b0
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x030b0
+ MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0
+ >;
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+ };
+
+ lvds-channel@1 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds1_out: endpoint {
+ remote-endpoint = <&panel_in_lvds1>;
+ };
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ non-removable;
+ vmmc-supply = <®_wlan_vmmc>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+ ref-clock-frequency = <38400000>;
+ };
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <8>;
+ non-removable;
+ vmmc-supply = <®_1p8v>;
+ keep-power-in-suspend;
+ status = "okay";
+};
--
2.9.3
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH 1/5] ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support
@ 2016-10-25 21:19 ` Gary Bisson
0 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-10-25 21:19 UTC (permalink / raw)
To: linux-arm-kernel
SoM based on i.MX6 Quad with 1GB of DDR3.
https://boundarydevices.com/product/nit6x-som-v2/
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-nitrogen6_som2.dts | 53 ++
arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 770 ++++++++++++++++++++++++++
3 files changed, 824 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 191807c..5647cc1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -386,6 +386,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-marsboard.dtb \
imx6q-nitrogen6x.dtb \
imx6q-nitrogen6_max.dtb \
+ imx6q-nitrogen6_som2.dtb \
imx6q-novena.dtb \
imx6q-phytec-pbab01.dtb \
imx6q-rex-pro.dtb \
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
new file mode 100644
index 0000000..cf4feef
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6_som2.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX6 Quad Nitrogen6_SOM2 Board";
+ compatible = "boundary,imx6q-nitrogen6_som2", "fsl,imx6q";
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
new file mode 100644
index 0000000..76f9b2a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -0,0 +1,770 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ backlight_lcd: backlight_lcd {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ backlight_lvds0: backlight_lvds0 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ backlight_lvds1: backlight_lvds1 {
+ compatible = "gpio-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight_lvds1>;
+ gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ default-on;
+ status = "okay";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+
+ menu {
+ label = "Menu";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ };
+
+ home {
+ label = "Home";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ };
+
+ back {
+ label = "Back";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ lcd_display: display at di0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_j15>;
+ status = "okay";
+
+ port at 0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ panel_lcd {
+ compatible = "okaya,rs800480t-7x0gp";
+ backlight = <&backlight_lcd>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
+ panel_lvds0 {
+ compatible = "hannstar,hsd100pxn1";
+ backlight = <&backlight_lvds0>;
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ panel_lvds1 {
+ compatible = "hannstar,hsd100pxn1";
+ backlight = <&backlight_lvds1>;
+
+ port {
+ panel_in_lvds1: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+ };
+
+ reg_1p8v: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_2p5v: regulator-2v5 {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_can_xcvr: regulator-can-xcvr {
+ compatible = "regulator-fixed";
+ regulator-name = "CAN XCVR";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_xcvr>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_usb_h1_vbus: regulator-usb-h1-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_wlan_vmmc: regulator-wlan-vmmc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wlan_vmmc>;
+ regulator-name = "reg_wlan_vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ sound {
+ compatible = "fsl,imx6q-nitrogen6_som2-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-nitrogen6_som2-sgtl5000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgtl5000>;
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <3>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ xceiver-supply = <®_can_xcvr>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: m25p80 at 0 {
+ compatible = "microchip,sst25vf016b";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,err006687-workaround-present;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: sgtl5000 at 0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+
+ rtc at 68 {
+ compatible = "st,rv4162";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rv4162>;
+ reg = <0x68>;
+ interrupts-extended = <&gpio6 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ touchscreen at 04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ touchscreen at 38 {
+ compatible = "edt,edt-ft5x06";
+ reg = <0x38>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&iomuxc {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_backlight_lvds1: backlight-lvds1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x0b0b0
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_can_xcvr: can-xcvrgrp {
+ fsl,pins = <
+ /* Flexcan XCVR enable */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0b0b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x130b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x030b0
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ >;
+ };
+
+ pinctrl_gpio_keys: gpio_keysgrp {
+ fsl,pins = <
+ /* Power Button */
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+ /* Menu Button */
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+ /* Home Button */
+ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
+ /* Back Button */
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+ /* Volume Up Button */
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
+ /* Volume Down Button */
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c3mux: i2c3muxgrp {
+ fsl,pins = <
+ /* PCIe I2C enable */
+ MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x000b0
+ >;
+ };
+
+ pinctrl_j15: j15grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ /* PCIe reset */
+ MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x030b0
+ MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x030b0
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x030b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x030b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x030b1
+ >;
+ };
+
+ pinctrl_rv4162: rv4162grp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
+ >;
+ };
+
+ pinctrl_sgtl5000: sgtl5000grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x130b0
+ MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x130b0
+ MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x130b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x030b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10071
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17071
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17071
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17071
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17071
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17071
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_wlan_vmmc: wlan_vmmcgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x100b0
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x030b0
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x030b0
+ MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0
+ >;
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel at 0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ port at 4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+ };
+
+ lvds-channel at 1 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ port at 4 {
+ reg = <4>;
+
+ lvds1_out: endpoint {
+ remote-endpoint = <&panel_in_lvds1>;
+ };
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ non-removable;
+ vmmc-supply = <®_wlan_vmmc>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore at 2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+ ref-clock-frequency = <38400000>;
+ };
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <8>;
+ non-removable;
+ vmmc-supply = <®_1p8v>;
+ keep-power-in-suspend;
+ status = "okay";
+};
--
2.9.3
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH 2/5] ARM: dts: imx6qdl-sabrelite: rename panel nodes
2016-10-25 21:19 ` Gary Bisson
@ 2016-10-25 21:19 ` Gary Bisson
-1 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-10-25 21:19 UTC (permalink / raw)
To: devicetree
Cc: fabio.estevam, linux, Gary Bisson, robh+dt, kernel, shawnguo,
linux-arm-kernel
So it is in line with other Boundary Device device tree (nit6xlite
and nitrogen6_max).
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 81dd6cd..cebea8a 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -197,7 +197,7 @@
};
};
- lcd_panel {
+ panel_lcd {
compatible = "okaya,rs800480t-7x0gp";
backlight = <&backlight_lcd>;
@@ -208,7 +208,7 @@
};
};
- panel {
+ panel_lvds0 {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds>;
--
2.9.3
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH 2/5] ARM: dts: imx6qdl-sabrelite: rename panel nodes
@ 2016-10-25 21:19 ` Gary Bisson
0 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-10-25 21:19 UTC (permalink / raw)
To: linux-arm-kernel
So it is in line with other Boundary Device device tree (nit6xlite
and nitrogen6_max).
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 81dd6cd..cebea8a 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -197,7 +197,7 @@
};
};
- lcd_panel {
+ panel_lcd {
compatible = "okaya,rs800480t-7x0gp";
backlight = <&backlight_lcd>;
@@ -208,7 +208,7 @@
};
};
- panel {
+ panel_lvds0 {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds>;
--
2.9.3
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH 3/5] ARM: dts: imx6qdl-sabrelite: add missing USB PHY reset control
2016-10-25 21:19 ` Gary Bisson
@ 2016-10-25 21:19 ` Gary Bisson
-1 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-10-25 21:19 UTC (permalink / raw)
To: devicetree
Cc: fabio.estevam, linux, Gary Bisson, robh+dt, kernel, shawnguo,
linux-arm-kernel
Declared as a regulator since the driver doesn't have a reset-gpios
property for this.
This ensures that the PHY is woken up, not depending on the state the
second stage bootloader leaves the pin.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index cebea8a..bf00267 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -94,6 +94,19 @@
pinctrl-0 = <&pinctrl_can_xcvr>;
gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
+
+ reg_usb_h1_vbus: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
};
gpio-keys {
@@ -481,6 +494,12 @@
>;
};
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0
+ >;
+ };
+
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
@@ -578,6 +597,7 @@
};
&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
status = "okay";
};
--
2.9.3
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH 3/5] ARM: dts: imx6qdl-sabrelite: add missing USB PHY reset control
@ 2016-10-25 21:19 ` Gary Bisson
0 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-10-25 21:19 UTC (permalink / raw)
To: linux-arm-kernel
Declared as a regulator since the driver doesn't have a reset-gpios
property for this.
This ensures that the PHY is woken up, not depending on the state the
second stage bootloader leaves the pin.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index cebea8a..bf00267 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -94,6 +94,19 @@
pinctrl-0 = <&pinctrl_can_xcvr>;
gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
+
+ reg_usb_h1_vbus: regulator at 4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
};
gpio-keys {
@@ -481,6 +494,12 @@
>;
};
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0
+ >;
+ };
+
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
@@ -578,6 +597,7 @@
};
&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
status = "okay";
};
--
2.9.3
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH 4/5] ARM: dts: imx6qdl-nitrogen6x: rename panel nodes
2016-10-25 21:19 ` Gary Bisson
@ 2016-10-25 21:19 ` Gary Bisson
-1 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-10-25 21:19 UTC (permalink / raw)
To: devicetree
Cc: fabio.estevam, linux, Gary Bisson, robh+dt, kernel, shawnguo,
linux-arm-kernel
So it is in line with other Boundary Device device tree (nit6xlite
and nitrogen6_max).
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index db868bc..c7016b2 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -211,7 +211,7 @@
};
};
- lcd_panel {
+ panel_lcd {
compatible = "okaya,rs800480t-7x0gp";
backlight = <&backlight_lcd>;
@@ -222,7 +222,7 @@
};
};
- panel {
+ panel_lvds0 {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds>;
--
2.9.3
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH 4/5] ARM: dts: imx6qdl-nitrogen6x: rename panel nodes
@ 2016-10-25 21:19 ` Gary Bisson
0 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-10-25 21:19 UTC (permalink / raw)
To: linux-arm-kernel
So it is in line with other Boundary Device device tree (nit6xlite
and nitrogen6_max).
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index db868bc..c7016b2 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -211,7 +211,7 @@
};
};
- lcd_panel {
+ panel_lcd {
compatible = "okaya,rs800480t-7x0gp";
backlight = <&backlight_lcd>;
@@ -222,7 +222,7 @@
};
};
- panel {
+ panel_lvds0 {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds>;
--
2.9.3
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH 5/5] ARM: dts: imx6qdl-nitrogen6x: add missing USB PHY reset control
2016-10-25 21:19 ` Gary Bisson
@ 2016-10-25 21:19 ` Gary Bisson
-1 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-10-25 21:19 UTC (permalink / raw)
To: devicetree
Cc: fabio.estevam, linux, Gary Bisson, robh+dt, kernel, shawnguo,
linux-arm-kernel
Declared as a regulator since the driver doesn't have a reset-gpios
property for this.
This ensures that the PHY is woken up, not depending on the state the
second stage bootloader leaves the pin.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index c7016b2..d471ced 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -108,6 +108,19 @@
startup-delay-us = <70000>;
enable-active-high;
};
+
+ reg_usb_h1_vbus: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
};
gpio-keys {
@@ -516,6 +529,12 @@
>;
};
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0
+ >;
+ };
+
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
@@ -633,6 +652,7 @@
};
&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
status = "okay";
};
--
2.9.3
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH 5/5] ARM: dts: imx6qdl-nitrogen6x: add missing USB PHY reset control
@ 2016-10-25 21:19 ` Gary Bisson
0 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-10-25 21:19 UTC (permalink / raw)
To: linux-arm-kernel
Declared as a regulator since the driver doesn't have a reset-gpios
property for this.
This ensures that the PHY is woken up, not depending on the state the
second stage bootloader leaves the pin.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index c7016b2..d471ced 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -108,6 +108,19 @@
startup-delay-us = <70000>;
enable-active-high;
};
+
+ reg_usb_h1_vbus: regulator at 5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
};
gpio-keys {
@@ -516,6 +529,12 @@
>;
};
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0
+ >;
+ };
+
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
@@ -633,6 +652,7 @@
};
&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
status = "okay";
};
--
2.9.3
^ permalink raw reply related [flat|nested] 38+ messages in thread
* Re: [PATCH 3/5] ARM: dts: imx6qdl-sabrelite: add missing USB PHY reset control
2016-10-25 21:19 ` Gary Bisson
@ 2016-10-25 21:28 ` Fabio Estevam
-1 siblings, 0 replies; 38+ messages in thread
From: Fabio Estevam @ 2016-10-25 21:28 UTC (permalink / raw)
To: Gary Bisson
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Fabio Estevam, Russell King,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, Sascha Hauer, Shawn Guo,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Peter Chen
Hi Gary,
On Tue, Oct 25, 2016 at 7:19 PM, Gary Bisson
<gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> wrote:
> Declared as a regulator since the driver doesn't have a reset-gpios
> property for this.
Peter Chen is working on adding USB reset-gpio property this. Please
check his series:
https://www.spinics.net/lists/arm-kernel/msg536105.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH 3/5] ARM: dts: imx6qdl-sabrelite: add missing USB PHY reset control
@ 2016-10-25 21:28 ` Fabio Estevam
0 siblings, 0 replies; 38+ messages in thread
From: Fabio Estevam @ 2016-10-25 21:28 UTC (permalink / raw)
To: linux-arm-kernel
Hi Gary,
On Tue, Oct 25, 2016 at 7:19 PM, Gary Bisson
<gary.bisson@boundarydevices.com> wrote:
> Declared as a regulator since the driver doesn't have a reset-gpios
> property for this.
Peter Chen is working on adding USB reset-gpio property this. Please
check his series:
https://www.spinics.net/lists/arm-kernel/msg536105.html
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH 3/5] ARM: dts: imx6qdl-sabrelite: add missing USB PHY reset control
2016-10-25 21:28 ` Fabio Estevam
@ 2016-10-25 21:53 ` Gary Bisson
-1 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-10-25 21:53 UTC (permalink / raw)
To: Fabio Estevam
Cc: Fabio Estevam, devicetree, Russell King, Peter Chen, robh+dt,
Sascha Hauer, Shawn Guo, linux-arm-kernel
Hi Fabio,
On Tue, Oct 25, 2016 at 11:28 PM, Fabio Estevam <festevam@gmail.com> wrote:
> Hi Gary,
>
> On Tue, Oct 25, 2016 at 7:19 PM, Gary Bisson
> <gary.bisson@boundarydevices.com> wrote:
>> Declared as a regulator since the driver doesn't have a reset-gpios
>> property for this.
>
> Peter Chen is working on adding USB reset-gpio property this. Please
> check his series:
> https://www.spinics.net/lists/arm-kernel/msg536105.html
Thanks, I wasn't aware of this series. Indeed if this power sequence
code gets upstream soon I guess we can drop both patches about the USB
PHY reset.
Note that our Nitrogen6_MAX is using the regulator approach, it will
need to be updated once Peter's series gets merged.
Regards,
Gary
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH 3/5] ARM: dts: imx6qdl-sabrelite: add missing USB PHY reset control
@ 2016-10-25 21:53 ` Gary Bisson
0 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-10-25 21:53 UTC (permalink / raw)
To: linux-arm-kernel
Hi Fabio,
On Tue, Oct 25, 2016 at 11:28 PM, Fabio Estevam <festevam@gmail.com> wrote:
> Hi Gary,
>
> On Tue, Oct 25, 2016 at 7:19 PM, Gary Bisson
> <gary.bisson@boundarydevices.com> wrote:
>> Declared as a regulator since the driver doesn't have a reset-gpios
>> property for this.
>
> Peter Chen is working on adding USB reset-gpio property this. Please
> check his series:
> https://www.spinics.net/lists/arm-kernel/msg536105.html
Thanks, I wasn't aware of this series. Indeed if this power sequence
code gets upstream soon I guess we can drop both patches about the USB
PHY reset.
Note that our Nitrogen6_MAX is using the regulator approach, it will
need to be updated once Peter's series gets merged.
Regards,
Gary
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH 1/5] ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support
2016-10-25 21:19 ` Gary Bisson
@ 2016-11-01 14:13 ` Shawn Guo
-1 siblings, 0 replies; 38+ messages in thread
From: Shawn Guo @ 2016-11-01 14:13 UTC (permalink / raw)
To: Gary Bisson
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
fabio.estevam-KZfg59tc24xl57MIdRCFDg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ
On Tue, Oct 25, 2016 at 11:19:51PM +0200, Gary Bisson wrote:
> SoM based on i.MX6 Quad with 1GB of DDR3.
>
> https://boundarydevices.com/product/nit6x-som-v2/
>
> Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx6q-nitrogen6_som2.dts | 53 ++
> arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 770 ++++++++++++++++++++++++++
> 3 files changed, 824 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
> create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
<snip>
> +/ {
> + chosen {
> + stdout-path = &uart2;
> + };
> +
> + memory {
> + reg = <0x10000000 0x40000000>;
> + };
> +
> + backlight_lcd: backlight_lcd {
Please use hyphen instead of underscore in node name. Please check
through the patch series.
Shawn
> + compatible = "pwm-backlight";
> + pwms = <&pwm1 0 5000000>;
> + brightness-levels = <0 4 8 16 32 64 128 255>;
> + default-brightness-level = <7>;
> + power-supply = <®_3p3v>;
> + status = "okay";
> + };
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH 1/5] ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support
@ 2016-11-01 14:13 ` Shawn Guo
0 siblings, 0 replies; 38+ messages in thread
From: Shawn Guo @ 2016-11-01 14:13 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Oct 25, 2016 at 11:19:51PM +0200, Gary Bisson wrote:
> SoM based on i.MX6 Quad with 1GB of DDR3.
>
> https://boundarydevices.com/product/nit6x-som-v2/
>
> Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx6q-nitrogen6_som2.dts | 53 ++
> arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 770 ++++++++++++++++++++++++++
> 3 files changed, 824 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
> create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
<snip>
> +/ {
> + chosen {
> + stdout-path = &uart2;
> + };
> +
> + memory {
> + reg = <0x10000000 0x40000000>;
> + };
> +
> + backlight_lcd: backlight_lcd {
Please use hyphen instead of underscore in node name. Please check
through the patch series.
Shawn
> + compatible = "pwm-backlight";
> + pwms = <&pwm1 0 5000000>;
> + brightness-levels = <0 4 8 16 32 64 128 255>;
> + default-brightness-level = <7>;
> + power-supply = <®_3p3v>;
> + status = "okay";
> + };
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH 3/5] ARM: dts: imx6qdl-sabrelite: add missing USB PHY reset control
2016-10-25 21:53 ` Gary Bisson
@ 2016-11-01 14:17 ` Shawn Guo
-1 siblings, 0 replies; 38+ messages in thread
From: Shawn Guo @ 2016-11-01 14:17 UTC (permalink / raw)
To: Gary Bisson
Cc: Fabio Estevam, devicetree-u79uwXL29TY76Z2rM5mHXA, Fabio Estevam,
Russell King, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, Sascha Hauer,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Peter Chen
On Tue, Oct 25, 2016 at 11:53:40PM +0200, Gary Bisson wrote:
> Hi Fabio,
>
> On Tue, Oct 25, 2016 at 11:28 PM, Fabio Estevam <festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> > Hi Gary,
> >
> > On Tue, Oct 25, 2016 at 7:19 PM, Gary Bisson
> > <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> wrote:
> >> Declared as a regulator since the driver doesn't have a reset-gpios
> >> property for this.
> >
> > Peter Chen is working on adding USB reset-gpio property this. Please
> > check his series:
> > https://www.spinics.net/lists/arm-kernel/msg536105.html
>
> Thanks, I wasn't aware of this series. Indeed if this power sequence
> code gets upstream soon I guess we can drop both patches about the USB
> PHY reset.
Let's wait then instead of adding something that will be removed later.
Shawn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH 3/5] ARM: dts: imx6qdl-sabrelite: add missing USB PHY reset control
@ 2016-11-01 14:17 ` Shawn Guo
0 siblings, 0 replies; 38+ messages in thread
From: Shawn Guo @ 2016-11-01 14:17 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Oct 25, 2016 at 11:53:40PM +0200, Gary Bisson wrote:
> Hi Fabio,
>
> On Tue, Oct 25, 2016 at 11:28 PM, Fabio Estevam <festevam@gmail.com> wrote:
> > Hi Gary,
> >
> > On Tue, Oct 25, 2016 at 7:19 PM, Gary Bisson
> > <gary.bisson@boundarydevices.com> wrote:
> >> Declared as a regulator since the driver doesn't have a reset-gpios
> >> property for this.
> >
> > Peter Chen is working on adding USB reset-gpio property this. Please
> > check his series:
> > https://www.spinics.net/lists/arm-kernel/msg536105.html
>
> Thanks, I wasn't aware of this series. Indeed if this power sequence
> code gets upstream soon I guess we can drop both patches about the USB
> PHY reset.
Let's wait then instead of adding something that will be removed later.
Shawn
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH 1/5] ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support
2016-11-01 14:13 ` Shawn Guo
@ 2016-11-01 14:54 ` Gary Bisson
-1 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-11-01 14:54 UTC (permalink / raw)
To: Shawn Guo
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Sascha Hauer, Rob Herring,
Fabio Estevam, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Russell King
Hi Shawn,
On Tue, Nov 1, 2016 at 3:13 PM, Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> On Tue, Oct 25, 2016 at 11:19:51PM +0200, Gary Bisson wrote:
>> SoM based on i.MX6 Quad with 1GB of DDR3.
>>
>> https://boundarydevices.com/product/nit6x-som-v2/
>>
>> Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
>> ---
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/imx6q-nitrogen6_som2.dts | 53 ++
>> arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 770 ++++++++++++++++++++++++++
>> 3 files changed, 824 insertions(+)
>> create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
>> create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
>
> <snip>
>
>> +/ {
>> + chosen {
>> + stdout-path = &uart2;
>> + };
>> +
>> + memory {
>> + reg = <0x10000000 0x40000000>;
>> + };
>> +
>> + backlight_lcd: backlight_lcd {
>
> Please use hyphen instead of underscore in node name. Please check
> through the patch series.
Sorry about that, forgot (again). Just to make sure, the label can
have underscore but not the name right? Or is it better to have hypens
everywhere?
So I guess I need to make a pass on current boards as well. Some
patches in my series rename the panel to panel_lvdsX to match the
current Nitrogen6_MAX naming[1] but this would need to be changed to
panel-lvdsX as well.
Regards,
Gary
[1] http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi#n296
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH 1/5] ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support
@ 2016-11-01 14:54 ` Gary Bisson
0 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-11-01 14:54 UTC (permalink / raw)
To: linux-arm-kernel
Hi Shawn,
On Tue, Nov 1, 2016 at 3:13 PM, Shawn Guo <shawnguo@kernel.org> wrote:
> On Tue, Oct 25, 2016 at 11:19:51PM +0200, Gary Bisson wrote:
>> SoM based on i.MX6 Quad with 1GB of DDR3.
>>
>> https://boundarydevices.com/product/nit6x-som-v2/
>>
>> Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
>> ---
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/imx6q-nitrogen6_som2.dts | 53 ++
>> arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 770 ++++++++++++++++++++++++++
>> 3 files changed, 824 insertions(+)
>> create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
>> create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
>
> <snip>
>
>> +/ {
>> + chosen {
>> + stdout-path = &uart2;
>> + };
>> +
>> + memory {
>> + reg = <0x10000000 0x40000000>;
>> + };
>> +
>> + backlight_lcd: backlight_lcd {
>
> Please use hyphen instead of underscore in node name. Please check
> through the patch series.
Sorry about that, forgot (again). Just to make sure, the label can
have underscore but not the name right? Or is it better to have hypens
everywhere?
So I guess I need to make a pass on current boards as well. Some
patches in my series rename the panel to panel_lvdsX to match the
current Nitrogen6_MAX naming[1] but this would need to be changed to
panel-lvdsX as well.
Regards,
Gary
[1] http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi#n296
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v2 0/5] ARM: dts: imx: update Boundary Devices boards support
2016-10-25 21:19 ` Gary Bisson
@ 2016-11-01 17:10 ` Gary Bisson
-1 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-11-01 17:10 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
fabio.estevam-KZfg59tc24xl57MIdRCFDg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, Gary Bisson
Hi all,
This series includes several patches to update the support for our platforms.
Here are the main goals of this series:
1- Adding support for our latest SOM (SOM2)
2- Replace underscores in nodes name
3- Fix panel naming consistency across the boards
Changelog v1->v2:
- Drop the USB PHY reset changes, waiting for Peter's series [1] to get in.
- Replace underscores in nodes name
Let me know if you have any question.
Regards,
Gary
[1] https://www.spinics.net/lists/arm-kernel/msg536105.html
Gary Bisson (5):
ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support
ARM: dts: imx6qdl-sabrelite: use hyphens for nodes name
ARM: dts: imx6qdl-nitrogen6x: use hyphens for nodes name
ARM: dts: imx6qdl-nit6xlite: use hyphens for nodes name
ARM: dts: imx6qdl-nitrogen6_max: use hyphens for nodes name
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-nitrogen6_som2.dts | 53 ++
arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 32 +-
arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 18 +-
arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 770 ++++++++++++++++++++++++++
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 12 +-
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 10 +-
7 files changed, 849 insertions(+), 47 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v2 0/5] ARM: dts: imx: update Boundary Devices boards support
@ 2016-11-01 17:10 ` Gary Bisson
0 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-11-01 17:10 UTC (permalink / raw)
To: linux-arm-kernel
Hi all,
This series includes several patches to update the support for our platforms.
Here are the main goals of this series:
1- Adding support for our latest SOM (SOM2)
2- Replace underscores in nodes name
3- Fix panel naming consistency across the boards
Changelog v1->v2:
- Drop the USB PHY reset changes, waiting for Peter's series [1] to get in.
- Replace underscores in nodes name
Let me know if you have any question.
Regards,
Gary
[1] https://www.spinics.net/lists/arm-kernel/msg536105.html
Gary Bisson (5):
ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support
ARM: dts: imx6qdl-sabrelite: use hyphens for nodes name
ARM: dts: imx6qdl-nitrogen6x: use hyphens for nodes name
ARM: dts: imx6qdl-nit6xlite: use hyphens for nodes name
ARM: dts: imx6qdl-nitrogen6_max: use hyphens for nodes name
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-nitrogen6_som2.dts | 53 ++
arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 32 +-
arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 18 +-
arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 770 ++++++++++++++++++++++++++
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 12 +-
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 10 +-
7 files changed, 849 insertions(+), 47 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
--
2.9.3
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v2 1/5] ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support
2016-11-01 17:10 ` Gary Bisson
@ 2016-11-01 17:10 ` Gary Bisson
-1 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-11-01 17:10 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
fabio.estevam-KZfg59tc24xl57MIdRCFDg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, Gary Bisson
SoM based on i.MX6 Quad with 1GB of DDR3.
https://boundarydevices.com/product/nit6x-som-v2/
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-nitrogen6_som2.dts | 53 ++
arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 770 ++++++++++++++++++++++++++
3 files changed, 824 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 224e2a5..0572d68 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -387,6 +387,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-marsboard.dtb \
imx6q-nitrogen6x.dtb \
imx6q-nitrogen6_max.dtb \
+ imx6q-nitrogen6_som2.dtb \
imx6q-novena.dtb \
imx6q-phytec-pbab01.dtb \
imx6q-rex-pro.dtb \
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
new file mode 100644
index 0000000..cf4feef
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6_som2.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX6 Quad Nitrogen6_SOM2 Board";
+ compatible = "boundary,imx6q-nitrogen6_som2", "fsl,imx6q";
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
new file mode 100644
index 0000000..d80f21a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -0,0 +1,770 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ backlight_lcd: backlight-lcd {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ backlight_lvds0: backlight-lvds0 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ backlight_lvds1: backlight-lvds1 {
+ compatible = "gpio-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight_lvds1>;
+ gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ default-on;
+ status = "okay";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+
+ menu {
+ label = "Menu";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ };
+
+ home {
+ label = "Home";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ };
+
+ back {
+ label = "Back";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ lcd_display: display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_j15>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ panel-lcd {
+ compatible = "okaya,rs800480t-7x0gp";
+ backlight = <&backlight_lcd>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
+ panel-lvds0 {
+ compatible = "hannstar,hsd100pxn1";
+ backlight = <&backlight_lvds0>;
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ panel-lvds1 {
+ compatible = "hannstar,hsd100pxn1";
+ backlight = <&backlight_lvds1>;
+
+ port {
+ panel_in_lvds1: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+ };
+
+ reg_1p8v: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_2p5v: regulator-2v5 {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_can_xcvr: regulator-can-xcvr {
+ compatible = "regulator-fixed";
+ regulator-name = "CAN XCVR";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_xcvr>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_usb_h1_vbus: regulator-usb-h1-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_wlan_vmmc: regulator-wlan-vmmc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wlan_vmmc>;
+ regulator-name = "reg_wlan_vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ sound {
+ compatible = "fsl,imx6q-nitrogen6_som2-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-nitrogen6_som2-sgtl5000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgtl5000>;
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <3>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ xceiver-supply = <®_can_xcvr>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ compatible = "microchip,sst25vf016b";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,err006687-workaround-present;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+
+ rtc@68 {
+ compatible = "st,rv4162";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rv4162>;
+ reg = <0x68>;
+ interrupts-extended = <&gpio6 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ touchscreen@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ touchscreen@38 {
+ compatible = "edt,edt-ft5x06";
+ reg = <0x38>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&iomuxc {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_backlight_lvds1: backlight-lvds1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x0b0b0
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_can_xcvr: can-xcvrgrp {
+ fsl,pins = <
+ /* Flexcan XCVR enable */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0b0b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x130b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x030b0
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ >;
+ };
+
+ pinctrl_gpio_keys: gpio-keysgrp {
+ fsl,pins = <
+ /* Power Button */
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+ /* Menu Button */
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+ /* Home Button */
+ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
+ /* Back Button */
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+ /* Volume Up Button */
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
+ /* Volume Down Button */
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c3mux: i2c3muxgrp {
+ fsl,pins = <
+ /* PCIe I2C enable */
+ MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x000b0
+ >;
+ };
+
+ pinctrl_j15: j15grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ /* PCIe reset */
+ MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x030b0
+ MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x030b0
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x030b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x030b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x030b1
+ >;
+ };
+
+ pinctrl_rv4162: rv4162grp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
+ >;
+ };
+
+ pinctrl_sgtl5000: sgtl5000grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x130b0
+ MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x130b0
+ MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x130b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x030b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10071
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17071
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17071
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17071
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17071
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17071
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_wlan_vmmc: wlan-vmmcgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x100b0
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x030b0
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x030b0
+ MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0
+ >;
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+ };
+
+ lvds-channel@1 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds1_out: endpoint {
+ remote-endpoint = <&panel_in_lvds1>;
+ };
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ non-removable;
+ vmmc-supply = <®_wlan_vmmc>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+ ref-clock-frequency = <38400000>;
+ };
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <8>;
+ non-removable;
+ vmmc-supply = <®_1p8v>;
+ keep-power-in-suspend;
+ status = "okay";
+};
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v2 1/5] ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support
@ 2016-11-01 17:10 ` Gary Bisson
0 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-11-01 17:10 UTC (permalink / raw)
To: linux-arm-kernel
SoM based on i.MX6 Quad with 1GB of DDR3.
https://boundarydevices.com/product/nit6x-som-v2/
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-nitrogen6_som2.dts | 53 ++
arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 770 ++++++++++++++++++++++++++
3 files changed, 824 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 224e2a5..0572d68 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -387,6 +387,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-marsboard.dtb \
imx6q-nitrogen6x.dtb \
imx6q-nitrogen6_max.dtb \
+ imx6q-nitrogen6_som2.dtb \
imx6q-novena.dtb \
imx6q-phytec-pbab01.dtb \
imx6q-rex-pro.dtb \
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
new file mode 100644
index 0000000..cf4feef
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6_som2.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX6 Quad Nitrogen6_SOM2 Board";
+ compatible = "boundary,imx6q-nitrogen6_som2", "fsl,imx6q";
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
new file mode 100644
index 0000000..d80f21a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -0,0 +1,770 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ backlight_lcd: backlight-lcd {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ backlight_lvds0: backlight-lvds0 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ backlight_lvds1: backlight-lvds1 {
+ compatible = "gpio-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight_lvds1>;
+ gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ default-on;
+ status = "okay";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+
+ menu {
+ label = "Menu";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ };
+
+ home {
+ label = "Home";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ };
+
+ back {
+ label = "Back";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ lcd_display: display at di0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_j15>;
+ status = "okay";
+
+ port at 0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ panel-lcd {
+ compatible = "okaya,rs800480t-7x0gp";
+ backlight = <&backlight_lcd>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
+ panel-lvds0 {
+ compatible = "hannstar,hsd100pxn1";
+ backlight = <&backlight_lvds0>;
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ panel-lvds1 {
+ compatible = "hannstar,hsd100pxn1";
+ backlight = <&backlight_lvds1>;
+
+ port {
+ panel_in_lvds1: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+ };
+
+ reg_1p8v: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_2p5v: regulator-2v5 {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_can_xcvr: regulator-can-xcvr {
+ compatible = "regulator-fixed";
+ regulator-name = "CAN XCVR";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_xcvr>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_usb_h1_vbus: regulator-usb-h1-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_wlan_vmmc: regulator-wlan-vmmc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wlan_vmmc>;
+ regulator-name = "reg_wlan_vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ sound {
+ compatible = "fsl,imx6q-nitrogen6_som2-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-nitrogen6_som2-sgtl5000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgtl5000>;
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <3>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ xceiver-supply = <®_can_xcvr>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: m25p80 at 0 {
+ compatible = "microchip,sst25vf016b";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,err006687-workaround-present;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: sgtl5000 at 0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+
+ rtc at 68 {
+ compatible = "st,rv4162";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rv4162>;
+ reg = <0x68>;
+ interrupts-extended = <&gpio6 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ touchscreen at 04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ touchscreen at 38 {
+ compatible = "edt,edt-ft5x06";
+ reg = <0x38>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&iomuxc {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_backlight_lvds1: backlight-lvds1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x0b0b0
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_can_xcvr: can-xcvrgrp {
+ fsl,pins = <
+ /* Flexcan XCVR enable */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0b0b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x130b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x030b0
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ >;
+ };
+
+ pinctrl_gpio_keys: gpio-keysgrp {
+ fsl,pins = <
+ /* Power Button */
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+ /* Menu Button */
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+ /* Home Button */
+ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
+ /* Back Button */
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+ /* Volume Up Button */
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
+ /* Volume Down Button */
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c3mux: i2c3muxgrp {
+ fsl,pins = <
+ /* PCIe I2C enable */
+ MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x000b0
+ >;
+ };
+
+ pinctrl_j15: j15grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ /* PCIe reset */
+ MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x030b0
+ MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x030b0
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x030b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x030b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x030b1
+ >;
+ };
+
+ pinctrl_rv4162: rv4162grp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
+ >;
+ };
+
+ pinctrl_sgtl5000: sgtl5000grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x130b0
+ MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x130b0
+ MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x130b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x030b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10071
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17071
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17071
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17071
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17071
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17071
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_wlan_vmmc: wlan-vmmcgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x100b0
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x030b0
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x030b0
+ MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0
+ >;
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel at 0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ port at 4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+ };
+
+ lvds-channel at 1 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ port at 4 {
+ reg = <4>;
+
+ lvds1_out: endpoint {
+ remote-endpoint = <&panel_in_lvds1>;
+ };
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ non-removable;
+ vmmc-supply = <®_wlan_vmmc>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore at 2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+ ref-clock-frequency = <38400000>;
+ };
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <8>;
+ non-removable;
+ vmmc-supply = <®_1p8v>;
+ keep-power-in-suspend;
+ status = "okay";
+};
--
2.9.3
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v2 2/5] ARM: dts: imx6qdl-sabrelite: use hyphens for nodes name
2016-11-01 17:10 ` Gary Bisson
@ 2016-11-01 17:10 ` Gary Bisson
-1 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-11-01 17:10 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
fabio.estevam-KZfg59tc24xl57MIdRCFDg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, Gary Bisson
Also aligning the panel nodes name across all platforms.
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 81dd6cd..1f9076e 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -153,7 +153,7 @@
mux-ext-port = <4>;
};
- backlight_lcd: backlight_lcd {
+ backlight_lcd: backlight-lcd {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -162,7 +162,7 @@
status = "okay";
};
- backlight_lvds: backlight_lvds {
+ backlight_lvds: backlight-lvds {
compatible = "pwm-backlight";
pwms = <&pwm4 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -197,7 +197,7 @@
};
};
- lcd_panel {
+ panel-lcd {
compatible = "okaya,rs800480t-7x0gp";
backlight = <&backlight_lcd>;
@@ -208,7 +208,7 @@
};
};
- panel {
+ panel-lvds0 {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds>;
@@ -378,7 +378,7 @@
>;
};
- pinctrl_gpio_keys: gpio_keysgrp {
+ pinctrl_gpio_keys: gpio-keysgrp {
fsl,pins = <
/* Power Button */
MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v2 2/5] ARM: dts: imx6qdl-sabrelite: use hyphens for nodes name
@ 2016-11-01 17:10 ` Gary Bisson
0 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-11-01 17:10 UTC (permalink / raw)
To: linux-arm-kernel
Also aligning the panel nodes name across all platforms.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 81dd6cd..1f9076e 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -153,7 +153,7 @@
mux-ext-port = <4>;
};
- backlight_lcd: backlight_lcd {
+ backlight_lcd: backlight-lcd {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -162,7 +162,7 @@
status = "okay";
};
- backlight_lvds: backlight_lvds {
+ backlight_lvds: backlight-lvds {
compatible = "pwm-backlight";
pwms = <&pwm4 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -197,7 +197,7 @@
};
};
- lcd_panel {
+ panel-lcd {
compatible = "okaya,rs800480t-7x0gp";
backlight = <&backlight_lcd>;
@@ -208,7 +208,7 @@
};
};
- panel {
+ panel-lvds0 {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds>;
@@ -378,7 +378,7 @@
>;
};
- pinctrl_gpio_keys: gpio_keysgrp {
+ pinctrl_gpio_keys: gpio-keysgrp {
fsl,pins = <
/* Power Button */
MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
--
2.9.3
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v2 3/5] ARM: dts: imx6qdl-nitrogen6x: use hyphens for nodes name
2016-11-01 17:10 ` Gary Bisson
@ 2016-11-01 17:10 ` Gary Bisson
-1 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-11-01 17:10 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
fabio.estevam-KZfg59tc24xl57MIdRCFDg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, Gary Bisson
Also aligning the panel nodes name across all platforms.
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index db868bc..e476d01 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -167,7 +167,7 @@
mux-ext-port = <3>;
};
- backlight_lcd: backlight_lcd {
+ backlight_lcd: backlight-lcd {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -176,7 +176,7 @@
status = "okay";
};
- backlight_lvds: backlight_lvds {
+ backlight_lvds: backlight-lvds {
compatible = "pwm-backlight";
pwms = <&pwm4 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -211,7 +211,7 @@
};
};
- lcd_panel {
+ panel-lcd {
compatible = "okaya,rs800480t-7x0gp";
backlight = <&backlight_lcd>;
@@ -222,7 +222,7 @@
};
};
- panel {
+ panel-lvds0 {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds>;
@@ -413,7 +413,7 @@
>;
};
- pinctrl_gpio_keys: gpio_keysgrp {
+ pinctrl_gpio_keys: gpio-keysgrp {
fsl,pins = <
/* Power Button */
MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
@@ -561,7 +561,7 @@
>;
};
- pinctrl_wlan_vmmc: wlan_vmmcgrp {
+ pinctrl_wlan_vmmc: wlan-vmmcgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v2 3/5] ARM: dts: imx6qdl-nitrogen6x: use hyphens for nodes name
@ 2016-11-01 17:10 ` Gary Bisson
0 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-11-01 17:10 UTC (permalink / raw)
To: linux-arm-kernel
Also aligning the panel nodes name across all platforms.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index db868bc..e476d01 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -167,7 +167,7 @@
mux-ext-port = <3>;
};
- backlight_lcd: backlight_lcd {
+ backlight_lcd: backlight-lcd {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -176,7 +176,7 @@
status = "okay";
};
- backlight_lvds: backlight_lvds {
+ backlight_lvds: backlight-lvds {
compatible = "pwm-backlight";
pwms = <&pwm4 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -211,7 +211,7 @@
};
};
- lcd_panel {
+ panel-lcd {
compatible = "okaya,rs800480t-7x0gp";
backlight = <&backlight_lcd>;
@@ -222,7 +222,7 @@
};
};
- panel {
+ panel-lvds0 {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds>;
@@ -413,7 +413,7 @@
>;
};
- pinctrl_gpio_keys: gpio_keysgrp {
+ pinctrl_gpio_keys: gpio-keysgrp {
fsl,pins = <
/* Power Button */
MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
@@ -561,7 +561,7 @@
>;
};
- pinctrl_wlan_vmmc: wlan_vmmcgrp {
+ pinctrl_wlan_vmmc: wlan-vmmcgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0
--
2.9.3
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v2 4/5] ARM: dts: imx6qdl-nit6xlite: use hyphens for nodes name
2016-11-01 17:10 ` Gary Bisson
@ 2016-11-01 17:10 ` Gary Bisson
-1 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-11-01 17:10 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
fabio.estevam-KZfg59tc24xl57MIdRCFDg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, Gary Bisson
Therefore aligning the panel nodes name across all platforms.
Also removing the bt_rfkill node since the mainline rfkill-gpio driver
doesn't support device trees.
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 32 +++++---------------------------
1 file changed, 5 insertions(+), 27 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index 880bd78..63acd54 100644
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -97,15 +97,6 @@
};
};
- bt_rfkill {
- compatible = "rfkill-gpio";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_bt_rfkill>;
- gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
- name = "bt_rfkill";
- type = <2>;
- };
-
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
@@ -160,7 +151,7 @@
};
};
- backlight_lcd {
+ backlight-lcd {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -169,7 +160,7 @@
status = "okay";
};
- backlight_lvds0: backlight_lvds0 {
+ backlight_lvds0: backlight-lvds0 {
compatible = "pwm-backlight";
pwms = <&pwm4 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -178,7 +169,7 @@
status = "okay";
};
- panel_lvds0 {
+ panel-lvds0 {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds0>;
@@ -328,19 +319,6 @@
>;
};
- pinctrl_bt_rfkill: bt_rfkillgrp {
- fsl,pins = <
- /* BT wake */
- MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
- /* BT reset */
- MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0b0b0
- /* BT reg en */
- MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
- /* BT host wake irq */
- MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x100b0
- >;
- };
-
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
@@ -374,7 +352,7 @@
>;
};
- pinctrl_gpio_keys: gpio_keysgrp {
+ pinctrl_gpio_keys: gpio-keysgrp {
fsl,pins = <
/* Home Button: J14 pin 5 */
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
@@ -457,7 +435,7 @@
>;
};
- pinctrl_wlan_vmmc: wlan_vmmcgrp {
+ pinctrl_wlan_vmmc: wlan-vmmcgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b0
>;
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v2 4/5] ARM: dts: imx6qdl-nit6xlite: use hyphens for nodes name
@ 2016-11-01 17:10 ` Gary Bisson
0 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-11-01 17:10 UTC (permalink / raw)
To: linux-arm-kernel
Therefore aligning the panel nodes name across all platforms.
Also removing the bt_rfkill node since the mainline rfkill-gpio driver
doesn't support device trees.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 32 +++++---------------------------
1 file changed, 5 insertions(+), 27 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index 880bd78..63acd54 100644
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -97,15 +97,6 @@
};
};
- bt_rfkill {
- compatible = "rfkill-gpio";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_bt_rfkill>;
- gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
- name = "bt_rfkill";
- type = <2>;
- };
-
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
@@ -160,7 +151,7 @@
};
};
- backlight_lcd {
+ backlight-lcd {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -169,7 +160,7 @@
status = "okay";
};
- backlight_lvds0: backlight_lvds0 {
+ backlight_lvds0: backlight-lvds0 {
compatible = "pwm-backlight";
pwms = <&pwm4 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -178,7 +169,7 @@
status = "okay";
};
- panel_lvds0 {
+ panel-lvds0 {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds0>;
@@ -328,19 +319,6 @@
>;
};
- pinctrl_bt_rfkill: bt_rfkillgrp {
- fsl,pins = <
- /* BT wake */
- MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
- /* BT reset */
- MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0b0b0
- /* BT reg en */
- MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
- /* BT host wake irq */
- MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x100b0
- >;
- };
-
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
@@ -374,7 +352,7 @@
>;
};
- pinctrl_gpio_keys: gpio_keysgrp {
+ pinctrl_gpio_keys: gpio-keysgrp {
fsl,pins = <
/* Home Button: J14 pin 5 */
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
@@ -457,7 +435,7 @@
>;
};
- pinctrl_wlan_vmmc: wlan_vmmcgrp {
+ pinctrl_wlan_vmmc: wlan-vmmcgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b0
>;
--
2.9.3
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v2 5/5] ARM: dts: imx6qdl-nitrogen6_max: use hyphens for nodes name
2016-11-01 17:10 ` Gary Bisson
@ 2016-11-01 17:10 ` Gary Bisson
-1 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-11-01 17:10 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
fabio.estevam-KZfg59tc24xl57MIdRCFDg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, Gary Bisson
Therefore aligning the panel nodes name across all platforms.
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index b0b3220..34887a1 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -229,7 +229,7 @@
};
};
- backlight_lcd: backlight_lcd {
+ backlight_lcd: backlight-lcd {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -238,7 +238,7 @@
status = "okay";
};
- backlight_lvds0: backlight_lvds0 {
+ backlight_lvds0: backlight-lvds0 {
compatible = "pwm-backlight";
pwms = <&pwm4 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -247,7 +247,7 @@
status = "okay";
};
- backlight_lvds1: backlight_lvds1 {
+ backlight_lvds1: backlight-lvds1 {
compatible = "pwm-backlight";
pwms = <&pwm2 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -282,7 +282,7 @@
};
};
- panel_lcd {
+ panel-lcd {
compatible = "okaya,rs800480t-7x0gp";
backlight = <&backlight_lcd>;
@@ -293,7 +293,7 @@
};
};
- panel_lvds0 {
+ panel-lvds0 {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds0>;
@@ -304,7 +304,7 @@
};
};
- panel_lvds1 {
+ panel-lvds1 {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds1>;
@@ -447,7 +447,7 @@
};
&iomuxc {
- imx6q-nitrogen6_max {
+ imx6q-nitrogen6-max {
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
@@ -504,7 +504,7 @@
>;
};
- pinctrl_gpio_keys: gpio_keysgrp {
+ pinctrl_gpio_keys: gpio-keysgrp {
fsl,pins = <
/* Power Button */
MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
@@ -720,7 +720,7 @@
>;
};
- pinctrl_wlan_vmmc: wlan_vmmcgrp {
+ pinctrl_wlan_vmmc: wlan-vmmcgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v2 5/5] ARM: dts: imx6qdl-nitrogen6_max: use hyphens for nodes name
@ 2016-11-01 17:10 ` Gary Bisson
0 siblings, 0 replies; 38+ messages in thread
From: Gary Bisson @ 2016-11-01 17:10 UTC (permalink / raw)
To: linux-arm-kernel
Therefore aligning the panel nodes name across all platforms.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index b0b3220..34887a1 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -229,7 +229,7 @@
};
};
- backlight_lcd: backlight_lcd {
+ backlight_lcd: backlight-lcd {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -238,7 +238,7 @@
status = "okay";
};
- backlight_lvds0: backlight_lvds0 {
+ backlight_lvds0: backlight-lvds0 {
compatible = "pwm-backlight";
pwms = <&pwm4 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -247,7 +247,7 @@
status = "okay";
};
- backlight_lvds1: backlight_lvds1 {
+ backlight_lvds1: backlight-lvds1 {
compatible = "pwm-backlight";
pwms = <&pwm2 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -282,7 +282,7 @@
};
};
- panel_lcd {
+ panel-lcd {
compatible = "okaya,rs800480t-7x0gp";
backlight = <&backlight_lcd>;
@@ -293,7 +293,7 @@
};
};
- panel_lvds0 {
+ panel-lvds0 {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds0>;
@@ -304,7 +304,7 @@
};
};
- panel_lvds1 {
+ panel-lvds1 {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds1>;
@@ -447,7 +447,7 @@
};
&iomuxc {
- imx6q-nitrogen6_max {
+ imx6q-nitrogen6-max {
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
@@ -504,7 +504,7 @@
>;
};
- pinctrl_gpio_keys: gpio_keysgrp {
+ pinctrl_gpio_keys: gpio-keysgrp {
fsl,pins = <
/* Power Button */
MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
@@ -720,7 +720,7 @@
>;
};
- pinctrl_wlan_vmmc: wlan_vmmcgrp {
+ pinctrl_wlan_vmmc: wlan-vmmcgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0
--
2.9.3
^ permalink raw reply related [flat|nested] 38+ messages in thread
* Re: [PATCH 1/5] ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support
2016-11-01 14:54 ` Gary Bisson
@ 2016-11-02 7:35 ` Shawn Guo
-1 siblings, 0 replies; 38+ messages in thread
From: Shawn Guo @ 2016-11-02 7:35 UTC (permalink / raw)
To: Gary Bisson
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Sascha Hauer, Rob Herring,
Fabio Estevam, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Russell King
On Tue, Nov 01, 2016 at 03:54:31PM +0100, Gary Bisson wrote:
> Hi Shawn,
>
> On Tue, Nov 1, 2016 at 3:13 PM, Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> > On Tue, Oct 25, 2016 at 11:19:51PM +0200, Gary Bisson wrote:
> >> SoM based on i.MX6 Quad with 1GB of DDR3.
> >>
> >> https://boundarydevices.com/product/nit6x-som-v2/
> >>
> >> Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
> >> ---
> >> arch/arm/boot/dts/Makefile | 1 +
> >> arch/arm/boot/dts/imx6q-nitrogen6_som2.dts | 53 ++
> >> arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 770 ++++++++++++++++++++++++++
> >> 3 files changed, 824 insertions(+)
> >> create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
> >> create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
> >
> > <snip>
> >
> >> +/ {
> >> + chosen {
> >> + stdout-path = &uart2;
> >> + };
> >> +
> >> + memory {
> >> + reg = <0x10000000 0x40000000>;
> >> + };
> >> +
> >> + backlight_lcd: backlight_lcd {
> >
> > Please use hyphen instead of underscore in node name. Please check
> > through the patch series.
>
> Sorry about that, forgot (again). Just to make sure, the label can
> have underscore but not the name right? Or is it better to have hypens
> everywhere?
Hyphen cannot be used in labels. Otherwise, DTC will complain.
> So I guess I need to make a pass on current boards as well.
I'm fine with the current boards and only expect it to be right with the
boards to be added.
Shawn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH 1/5] ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support
@ 2016-11-02 7:35 ` Shawn Guo
0 siblings, 0 replies; 38+ messages in thread
From: Shawn Guo @ 2016-11-02 7:35 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Nov 01, 2016 at 03:54:31PM +0100, Gary Bisson wrote:
> Hi Shawn,
>
> On Tue, Nov 1, 2016 at 3:13 PM, Shawn Guo <shawnguo@kernel.org> wrote:
> > On Tue, Oct 25, 2016 at 11:19:51PM +0200, Gary Bisson wrote:
> >> SoM based on i.MX6 Quad with 1GB of DDR3.
> >>
> >> https://boundarydevices.com/product/nit6x-som-v2/
> >>
> >> Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
> >> ---
> >> arch/arm/boot/dts/Makefile | 1 +
> >> arch/arm/boot/dts/imx6q-nitrogen6_som2.dts | 53 ++
> >> arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 770 ++++++++++++++++++++++++++
> >> 3 files changed, 824 insertions(+)
> >> create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
> >> create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
> >
> > <snip>
> >
> >> +/ {
> >> + chosen {
> >> + stdout-path = &uart2;
> >> + };
> >> +
> >> + memory {
> >> + reg = <0x10000000 0x40000000>;
> >> + };
> >> +
> >> + backlight_lcd: backlight_lcd {
> >
> > Please use hyphen instead of underscore in node name. Please check
> > through the patch series.
>
> Sorry about that, forgot (again). Just to make sure, the label can
> have underscore but not the name right? Or is it better to have hypens
> everywhere?
Hyphen cannot be used in labels. Otherwise, DTC will complain.
> So I guess I need to make a pass on current boards as well.
I'm fine with the current boards and only expect it to be right with the
boards to be added.
Shawn
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v2 0/5] ARM: dts: imx: update Boundary Devices boards support
2016-11-01 17:10 ` Gary Bisson
@ 2016-11-02 7:40 ` Shawn Guo
-1 siblings, 0 replies; 38+ messages in thread
From: Shawn Guo @ 2016-11-02 7:40 UTC (permalink / raw)
To: Gary Bisson
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
fabio.estevam-KZfg59tc24xl57MIdRCFDg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ
On Tue, Nov 01, 2016 at 06:10:01PM +0100, Gary Bisson wrote:
> Gary Bisson (5):
> ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support
> ARM: dts: imx6qdl-sabrelite: use hyphens for nodes name
> ARM: dts: imx6qdl-nitrogen6x: use hyphens for nodes name
> ARM: dts: imx6qdl-nit6xlite: use hyphens for nodes name
> ARM: dts: imx6qdl-nitrogen6_max: use hyphens for nodes name
Applied all, thanks.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v2 0/5] ARM: dts: imx: update Boundary Devices boards support
@ 2016-11-02 7:40 ` Shawn Guo
0 siblings, 0 replies; 38+ messages in thread
From: Shawn Guo @ 2016-11-02 7:40 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Nov 01, 2016 at 06:10:01PM +0100, Gary Bisson wrote:
> Gary Bisson (5):
> ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support
> ARM: dts: imx6qdl-sabrelite: use hyphens for nodes name
> ARM: dts: imx6qdl-nitrogen6x: use hyphens for nodes name
> ARM: dts: imx6qdl-nit6xlite: use hyphens for nodes name
> ARM: dts: imx6qdl-nitrogen6_max: use hyphens for nodes name
Applied all, thanks.
^ permalink raw reply [flat|nested] 38+ messages in thread
end of thread, other threads:[~2016-11-02 7:40 UTC | newest]
Thread overview: 38+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-10-25 21:19 [PATCH 0/5] ARM: dts: imx: update Boundary Devices boards support Gary Bisson
2016-10-25 21:19 ` Gary Bisson
2016-10-25 21:19 ` [PATCH 1/5] ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support Gary Bisson
2016-10-25 21:19 ` Gary Bisson
[not found] ` <20161025211955.5345-2-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-11-01 14:13 ` Shawn Guo
2016-11-01 14:13 ` Shawn Guo
2016-11-01 14:54 ` Gary Bisson
2016-11-01 14:54 ` Gary Bisson
[not found] ` <CAAMH-yugLeHjaSwMx9ZoJ9qm44VKXcgO64xdsO=HBj59pj5cUA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-11-02 7:35 ` Shawn Guo
2016-11-02 7:35 ` Shawn Guo
2016-10-25 21:19 ` [PATCH 2/5] ARM: dts: imx6qdl-sabrelite: rename panel nodes Gary Bisson
2016-10-25 21:19 ` Gary Bisson
2016-10-25 21:19 ` [PATCH 3/5] ARM: dts: imx6qdl-sabrelite: add missing USB PHY reset control Gary Bisson
2016-10-25 21:19 ` Gary Bisson
[not found] ` <20161025211955.5345-4-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-10-25 21:28 ` Fabio Estevam
2016-10-25 21:28 ` Fabio Estevam
2016-10-25 21:53 ` Gary Bisson
2016-10-25 21:53 ` Gary Bisson
[not found] ` <CAAMH-yu1oC8qaAtVwSxJxKxSmXMzMJkUeu4cUu3OB2yhDV8GBg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-11-01 14:17 ` Shawn Guo
2016-11-01 14:17 ` Shawn Guo
2016-10-25 21:19 ` [PATCH 4/5] ARM: dts: imx6qdl-nitrogen6x: rename panel nodes Gary Bisson
2016-10-25 21:19 ` Gary Bisson
2016-10-25 21:19 ` [PATCH 5/5] ARM: dts: imx6qdl-nitrogen6x: add missing USB PHY reset control Gary Bisson
2016-10-25 21:19 ` Gary Bisson
[not found] ` <20161025211955.5345-1-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-11-01 17:10 ` [PATCH v2 0/5] ARM: dts: imx: update Boundary Devices boards support Gary Bisson
2016-11-01 17:10 ` Gary Bisson
[not found] ` <20161101171006.24594-1-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-11-01 17:10 ` [PATCH v2 1/5] ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support Gary Bisson
2016-11-01 17:10 ` Gary Bisson
2016-11-01 17:10 ` [PATCH v2 2/5] ARM: dts: imx6qdl-sabrelite: use hyphens for nodes name Gary Bisson
2016-11-01 17:10 ` Gary Bisson
2016-11-01 17:10 ` [PATCH v2 3/5] ARM: dts: imx6qdl-nitrogen6x: " Gary Bisson
2016-11-01 17:10 ` Gary Bisson
2016-11-01 17:10 ` [PATCH v2 4/5] ARM: dts: imx6qdl-nit6xlite: " Gary Bisson
2016-11-01 17:10 ` Gary Bisson
2016-11-01 17:10 ` [PATCH v2 5/5] ARM: dts: imx6qdl-nitrogen6_max: " Gary Bisson
2016-11-01 17:10 ` Gary Bisson
2016-11-02 7:40 ` [PATCH v2 0/5] ARM: dts: imx: update Boundary Devices boards support Shawn Guo
2016-11-02 7:40 ` Shawn Guo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.