* [PATCH] ARM: dts: qcom: Add apq8064 CoreSight components
@ 2016-11-17 15:36 ` Georgi Djakov
0 siblings, 0 replies; 11+ messages in thread
From: Georgi Djakov @ 2016-11-17 15:36 UTC (permalink / raw)
To: andy.gross
Cc: devicetree, mathieu.poirier, linux-arm-msm, linux-kernel,
zhang.chunyan, robh+dt, iivanov.xz, georgi.djakov,
linux-arm-kernel
From: "Ivan T. Ivanov" <ivan.ivanov@linaro.org>
Add initial set of CoreSight components found on Qualcomm's
8064 chipset.
Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
arch/arm/boot/dts/qcom-apq8064-coresight.dtsi | 196 ++++++++++++++++++++++++++
arch/arm/boot/dts/qcom-apq8064.dtsi | 11 +-
2 files changed, 203 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom-apq8064-coresight.dtsi
diff --git a/arch/arm/boot/dts/qcom-apq8064-coresight.dtsi b/arch/arm/boot/dts/qcom-apq8064-coresight.dtsi
new file mode 100644
index 000000000000..9395fddb1bf0
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-coresight.dtsi
@@ -0,0 +1,196 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+&soc {
+
+ etb@1a01000 {
+ compatible = "coresight-etb10", "arm,primecell";
+ reg = <0x1a01000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ etb_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out0>;
+ };
+ };
+ };
+
+ tpiu@1a03000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0x1a03000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ tpiu_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out1>;
+ };
+ };
+ };
+
+ replicator {
+ compatible = "arm,coresight-replicator";
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ replicator_out0: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ replicator_out1: endpoint {
+ remote-endpoint = <&tpiu_in>;
+ };
+ };
+ port@2 {
+ reg = <0>;
+ replicator_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&funnel_out>;
+ };
+ };
+ };
+ };
+
+ funnel@1a04000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0x1a04000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Not described input ports:
+ * 2 - connected to STM component
+ * 3 - not-connected
+ * 6 - not-connected
+ * 7 - not-connected
+ */
+ port@0 {
+ reg = <0>;
+ funnel_in0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ funnel_in1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+ port@4 {
+ reg = <4>;
+ funnel_in4: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+ port@5 {
+ reg = <5>;
+ funnel_in5: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+ port@8 {
+ reg = <0>;
+ funnel_out: endpoint {
+ remote-endpoint = <&replicator_in>;
+ };
+ };
+ };
+ };
+
+ etm@1a1c000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1c000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU0>;
+
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel_in0>;
+ };
+ };
+ };
+
+ etm@1a1d000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1d000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU1>;
+
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel_in1>;
+ };
+ };
+ };
+
+ etm@1a1e000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1e000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU2>;
+
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel_in4>;
+ };
+ };
+ };
+
+ etm@1a1f000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1f000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU3>;
+
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel_in5>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 268bd470c865..18469c632e2f 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -4,6 +4,7 @@
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -27,7 +28,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ CPU0: cpu@0 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -38,7 +39,7 @@
cpu-idle-states = <&CPU_SPC>;
};
- cpu@1 {
+ CPU1: cpu@1 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -49,7 +50,7 @@
cpu-idle-states = <&CPU_SPC>;
};
- cpu@2 {
+ CPU2: cpu@2 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -60,7 +61,7 @@
cpu-idle-states = <&CPU_SPC>;
};
- cpu@3 {
+ CPU3: cpu@3 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -1418,4 +1419,6 @@
};
};
};
+
+#include "qcom-apq8064-coresight.dtsi"
#include "qcom-apq8064-pins.dtsi"
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH] ARM: dts: qcom: Add apq8064 CoreSight components
@ 2016-11-17 15:36 ` Georgi Djakov
0 siblings, 0 replies; 11+ messages in thread
From: Georgi Djakov @ 2016-11-17 15:36 UTC (permalink / raw)
To: andy.gross
Cc: robh+dt, devicetree, mathieu.poirier, zhang.chunyan, iivanov.xz,
linux-arm-msm, linux-kernel, linux-arm-kernel, georgi.djakov
From: "Ivan T. Ivanov" <ivan.ivanov@linaro.org>
Add initial set of CoreSight components found on Qualcomm's
8064 chipset.
Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
arch/arm/boot/dts/qcom-apq8064-coresight.dtsi | 196 ++++++++++++++++++++++++++
arch/arm/boot/dts/qcom-apq8064.dtsi | 11 +-
2 files changed, 203 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom-apq8064-coresight.dtsi
diff --git a/arch/arm/boot/dts/qcom-apq8064-coresight.dtsi b/arch/arm/boot/dts/qcom-apq8064-coresight.dtsi
new file mode 100644
index 000000000000..9395fddb1bf0
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-coresight.dtsi
@@ -0,0 +1,196 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+&soc {
+
+ etb@1a01000 {
+ compatible = "coresight-etb10", "arm,primecell";
+ reg = <0x1a01000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ etb_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out0>;
+ };
+ };
+ };
+
+ tpiu@1a03000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0x1a03000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ tpiu_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out1>;
+ };
+ };
+ };
+
+ replicator {
+ compatible = "arm,coresight-replicator";
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ replicator_out0: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ replicator_out1: endpoint {
+ remote-endpoint = <&tpiu_in>;
+ };
+ };
+ port@2 {
+ reg = <0>;
+ replicator_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&funnel_out>;
+ };
+ };
+ };
+ };
+
+ funnel@1a04000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0x1a04000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Not described input ports:
+ * 2 - connected to STM component
+ * 3 - not-connected
+ * 6 - not-connected
+ * 7 - not-connected
+ */
+ port@0 {
+ reg = <0>;
+ funnel_in0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ funnel_in1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+ port@4 {
+ reg = <4>;
+ funnel_in4: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+ port@5 {
+ reg = <5>;
+ funnel_in5: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+ port@8 {
+ reg = <0>;
+ funnel_out: endpoint {
+ remote-endpoint = <&replicator_in>;
+ };
+ };
+ };
+ };
+
+ etm@1a1c000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1c000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU0>;
+
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel_in0>;
+ };
+ };
+ };
+
+ etm@1a1d000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1d000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU1>;
+
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel_in1>;
+ };
+ };
+ };
+
+ etm@1a1e000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1e000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU2>;
+
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel_in4>;
+ };
+ };
+ };
+
+ etm@1a1f000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1f000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU3>;
+
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel_in5>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 268bd470c865..18469c632e2f 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -4,6 +4,7 @@
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -27,7 +28,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ CPU0: cpu@0 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -38,7 +39,7 @@
cpu-idle-states = <&CPU_SPC>;
};
- cpu@1 {
+ CPU1: cpu@1 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -49,7 +50,7 @@
cpu-idle-states = <&CPU_SPC>;
};
- cpu@2 {
+ CPU2: cpu@2 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -60,7 +61,7 @@
cpu-idle-states = <&CPU_SPC>;
};
- cpu@3 {
+ CPU3: cpu@3 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -1418,4 +1419,6 @@
};
};
};
+
+#include "qcom-apq8064-coresight.dtsi"
#include "qcom-apq8064-pins.dtsi"
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH] ARM: dts: qcom: Add apq8064 CoreSight components
@ 2016-11-17 15:36 ` Georgi Djakov
0 siblings, 0 replies; 11+ messages in thread
From: Georgi Djakov @ 2016-11-17 15:36 UTC (permalink / raw)
To: linux-arm-kernel
From: "Ivan T. Ivanov" <ivan.ivanov@linaro.org>
Add initial set of CoreSight components found on Qualcomm's
8064 chipset.
Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
arch/arm/boot/dts/qcom-apq8064-coresight.dtsi | 196 ++++++++++++++++++++++++++
arch/arm/boot/dts/qcom-apq8064.dtsi | 11 +-
2 files changed, 203 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom-apq8064-coresight.dtsi
diff --git a/arch/arm/boot/dts/qcom-apq8064-coresight.dtsi b/arch/arm/boot/dts/qcom-apq8064-coresight.dtsi
new file mode 100644
index 000000000000..9395fddb1bf0
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-coresight.dtsi
@@ -0,0 +1,196 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+&soc {
+
+ etb at 1a01000 {
+ compatible = "coresight-etb10", "arm,primecell";
+ reg = <0x1a01000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ etb_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out0>;
+ };
+ };
+ };
+
+ tpiu at 1a03000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0x1a03000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ tpiu_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out1>;
+ };
+ };
+ };
+
+ replicator {
+ compatible = "arm,coresight-replicator";
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ replicator_out0: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
+ };
+ port at 1 {
+ reg = <1>;
+ replicator_out1: endpoint {
+ remote-endpoint = <&tpiu_in>;
+ };
+ };
+ port at 2 {
+ reg = <0>;
+ replicator_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&funnel_out>;
+ };
+ };
+ };
+ };
+
+ funnel at 1a04000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0x1a04000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Not described input ports:
+ * 2 - connected to STM component
+ * 3 - not-connected
+ * 6 - not-connected
+ * 7 - not-connected
+ */
+ port at 0 {
+ reg = <0>;
+ funnel_in0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+ port at 1 {
+ reg = <1>;
+ funnel_in1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+ port at 4 {
+ reg = <4>;
+ funnel_in4: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+ port at 5 {
+ reg = <5>;
+ funnel_in5: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+ port at 8 {
+ reg = <0>;
+ funnel_out: endpoint {
+ remote-endpoint = <&replicator_in>;
+ };
+ };
+ };
+ };
+
+ etm at 1a1c000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1c000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU0>;
+
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel_in0>;
+ };
+ };
+ };
+
+ etm at 1a1d000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1d000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU1>;
+
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel_in1>;
+ };
+ };
+ };
+
+ etm at 1a1e000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1e000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU2>;
+
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel_in4>;
+ };
+ };
+ };
+
+ etm at 1a1f000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1f000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU3>;
+
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel_in5>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 268bd470c865..18469c632e2f 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -4,6 +4,7 @@
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -27,7 +28,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu at 0 {
+ CPU0: cpu at 0 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -38,7 +39,7 @@
cpu-idle-states = <&CPU_SPC>;
};
- cpu at 1 {
+ CPU1: cpu at 1 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -49,7 +50,7 @@
cpu-idle-states = <&CPU_SPC>;
};
- cpu at 2 {
+ CPU2: cpu at 2 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -60,7 +61,7 @@
cpu-idle-states = <&CPU_SPC>;
};
- cpu at 3 {
+ CPU3: cpu at 3 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -1418,4 +1419,6 @@
};
};
};
+
+#include "qcom-apq8064-coresight.dtsi"
#include "qcom-apq8064-pins.dtsi"
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH] ARM: dts: qcom: Add apq8064 CoreSight components
2016-11-17 15:36 ` Georgi Djakov
(?)
@ 2016-11-17 19:04 ` Mathieu Poirier
-1 siblings, 0 replies; 11+ messages in thread
From: Mathieu Poirier @ 2016-11-17 19:04 UTC (permalink / raw)
To: Georgi Djakov
Cc: andy.gross-QSEj5FYQhm4dnm+yROfE0A,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
devicetree-u79uwXL29TY76Z2rM5mHXA,
zhang.chunyan-QSEj5FYQhm4dnm+yROfE0A,
iivanov.xz-Re5JQEeQqe8AvxtiuMwx3w,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
On Thu, Nov 17, 2016 at 05:36:09PM +0200, Georgi Djakov wrote:
> From: "Ivan T. Ivanov" <ivan.ivanov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>
> Add initial set of CoreSight components found on Qualcomm's
> 8064 chipset.
>
> Signed-off-by: Ivan T. Ivanov <ivan.ivanov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Signed-off-by: Georgi Djakov <georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
> arch/arm/boot/dts/qcom-apq8064-coresight.dtsi | 196 ++++++++++++++++++++++++++
> arch/arm/boot/dts/qcom-apq8064.dtsi | 11 +-
> 2 files changed, 203 insertions(+), 4 deletions(-)
> create mode 100644 arch/arm/boot/dts/qcom-apq8064-coresight.dtsi
>
> diff --git a/arch/arm/boot/dts/qcom-apq8064-coresight.dtsi b/arch/arm/boot/dts/qcom-apq8064-coresight.dtsi
> new file mode 100644
> index 000000000000..9395fddb1bf0
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-apq8064-coresight.dtsi
> @@ -0,0 +1,196 @@
> +/*
> + * Copyright (c) 2015, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +&soc {
> +
> + etb@1a01000 {
> + compatible = "coresight-etb10", "arm,primecell";
> + reg = <0x1a01000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + port {
> + etb_in: endpoint {
> + slave-mode;
> + remote-endpoint = <&replicator_out0>;
> + };
> + };
> + };
> +
> + tpiu@1a03000 {
> + compatible = "arm,coresight-tpiu", "arm,primecell";
> + reg = <0x1a03000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + port {
> + tpiu_in: endpoint {
> + slave-mode;
> + remote-endpoint = <&replicator_out1>;
> + };
> + };
> + };
> +
> + replicator {
> + compatible = "arm,coresight-replicator";
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + replicator_out0: endpoint {
> + remote-endpoint = <&etb_in>;
> + };
> + };
> + port@1 {
> + reg = <1>;
> + replicator_out1: endpoint {
> + remote-endpoint = <&tpiu_in>;
> + };
> + };
> + port@2 {
> + reg = <0>;
> + replicator_in: endpoint {
> + slave-mode;
> + remote-endpoint = <&funnel_out>;
> + };
> + };
> + };
> + };
> +
> + funnel@1a04000 {
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x1a04000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /*
> + * Not described input ports:
> + * 2 - connected to STM component
> + * 3 - not-connected
> + * 6 - not-connected
> + * 7 - not-connected
> + */
> + port@0 {
> + reg = <0>;
> + funnel_in0: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm0_out>;
> + };
> + };
> + port@1 {
> + reg = <1>;
> + funnel_in1: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm1_out>;
> + };
> + };
> + port@4 {
> + reg = <4>;
> + funnel_in4: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm2_out>;
> + };
> + };
> + port@5 {
> + reg = <5>;
> + funnel_in5: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm3_out>;
> + };
> + };
> + port@8 {
> + reg = <0>;
> + funnel_out: endpoint {
> + remote-endpoint = <&replicator_in>;
> + };
> + };
> + };
> + };
> +
> + etm@1a1c000 {
> + compatible = "arm,coresight-etm3x", "arm,primecell";
> + reg = <0x1a1c000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU0>;
> +
> + port {
> + etm0_out: endpoint {
> + remote-endpoint = <&funnel_in0>;
> + };
> + };
> + };
> +
> + etm@1a1d000 {
> + compatible = "arm,coresight-etm3x", "arm,primecell";
> + reg = <0x1a1d000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU1>;
> +
> + port {
> + etm1_out: endpoint {
> + remote-endpoint = <&funnel_in1>;
> + };
> + };
> + };
> +
> + etm@1a1e000 {
> + compatible = "arm,coresight-etm3x", "arm,primecell";
> + reg = <0x1a1e000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU2>;
> +
> + port {
> + etm2_out: endpoint {
> + remote-endpoint = <&funnel_in4>;
> + };
> + };
> + };
> +
> + etm@1a1f000 {
> + compatible = "arm,coresight-etm3x", "arm,primecell";
> + reg = <0x1a1f000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU3>;
> +
> + port {
> + etm3_out: endpoint {
> + remote-endpoint = <&funnel_in5>;
> + };
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
> index 268bd470c865..18469c632e2f 100644
> --- a/arch/arm/boot/dts/qcom-apq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
> @@ -4,6 +4,7 @@
> #include <dt-bindings/clock/qcom,gcc-msm8960.h>
> #include <dt-bindings/reset/qcom,gcc-msm8960.h>
> #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
> +#include <dt-bindings/clock/qcom,rpmcc.h>
> #include <dt-bindings/soc/qcom,gsbi.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> @@ -27,7 +28,7 @@
> #address-cells = <1>;
> #size-cells = <0>;
>
> - cpu@0 {
> + CPU0: cpu@0 {
> compatible = "qcom,krait";
> enable-method = "qcom,kpss-acc-v1";
> device_type = "cpu";
> @@ -38,7 +39,7 @@
> cpu-idle-states = <&CPU_SPC>;
> };
>
> - cpu@1 {
> + CPU1: cpu@1 {
> compatible = "qcom,krait";
> enable-method = "qcom,kpss-acc-v1";
> device_type = "cpu";
> @@ -49,7 +50,7 @@
> cpu-idle-states = <&CPU_SPC>;
> };
>
> - cpu@2 {
> + CPU2: cpu@2 {
> compatible = "qcom,krait";
> enable-method = "qcom,kpss-acc-v1";
> device_type = "cpu";
> @@ -60,7 +61,7 @@
> cpu-idle-states = <&CPU_SPC>;
> };
>
> - cpu@3 {
> + CPU3: cpu@3 {
> compatible = "qcom,krait";
> enable-method = "qcom,kpss-acc-v1";
> device_type = "cpu";
> @@ -1418,4 +1419,6 @@
> };
> };
> };
> +
> +#include "qcom-apq8064-coresight.dtsi"
> #include "qcom-apq8064-pins.dtsi"
Acked-by: Mathieu Poirier <mathieu.poirier-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] ARM: dts: qcom: Add apq8064 CoreSight components
@ 2016-11-17 19:04 ` Mathieu Poirier
0 siblings, 0 replies; 11+ messages in thread
From: Mathieu Poirier @ 2016-11-17 19:04 UTC (permalink / raw)
To: Georgi Djakov
Cc: andy.gross, robh+dt, devicetree, zhang.chunyan, iivanov.xz,
linux-arm-msm, linux-kernel, linux-arm-kernel
On Thu, Nov 17, 2016 at 05:36:09PM +0200, Georgi Djakov wrote:
> From: "Ivan T. Ivanov" <ivan.ivanov@linaro.org>
>
> Add initial set of CoreSight components found on Qualcomm's
> 8064 chipset.
>
> Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
> ---
> arch/arm/boot/dts/qcom-apq8064-coresight.dtsi | 196 ++++++++++++++++++++++++++
> arch/arm/boot/dts/qcom-apq8064.dtsi | 11 +-
> 2 files changed, 203 insertions(+), 4 deletions(-)
> create mode 100644 arch/arm/boot/dts/qcom-apq8064-coresight.dtsi
>
> diff --git a/arch/arm/boot/dts/qcom-apq8064-coresight.dtsi b/arch/arm/boot/dts/qcom-apq8064-coresight.dtsi
> new file mode 100644
> index 000000000000..9395fddb1bf0
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-apq8064-coresight.dtsi
> @@ -0,0 +1,196 @@
> +/*
> + * Copyright (c) 2015, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +&soc {
> +
> + etb@1a01000 {
> + compatible = "coresight-etb10", "arm,primecell";
> + reg = <0x1a01000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + port {
> + etb_in: endpoint {
> + slave-mode;
> + remote-endpoint = <&replicator_out0>;
> + };
> + };
> + };
> +
> + tpiu@1a03000 {
> + compatible = "arm,coresight-tpiu", "arm,primecell";
> + reg = <0x1a03000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + port {
> + tpiu_in: endpoint {
> + slave-mode;
> + remote-endpoint = <&replicator_out1>;
> + };
> + };
> + };
> +
> + replicator {
> + compatible = "arm,coresight-replicator";
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + replicator_out0: endpoint {
> + remote-endpoint = <&etb_in>;
> + };
> + };
> + port@1 {
> + reg = <1>;
> + replicator_out1: endpoint {
> + remote-endpoint = <&tpiu_in>;
> + };
> + };
> + port@2 {
> + reg = <0>;
> + replicator_in: endpoint {
> + slave-mode;
> + remote-endpoint = <&funnel_out>;
> + };
> + };
> + };
> + };
> +
> + funnel@1a04000 {
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x1a04000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /*
> + * Not described input ports:
> + * 2 - connected to STM component
> + * 3 - not-connected
> + * 6 - not-connected
> + * 7 - not-connected
> + */
> + port@0 {
> + reg = <0>;
> + funnel_in0: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm0_out>;
> + };
> + };
> + port@1 {
> + reg = <1>;
> + funnel_in1: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm1_out>;
> + };
> + };
> + port@4 {
> + reg = <4>;
> + funnel_in4: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm2_out>;
> + };
> + };
> + port@5 {
> + reg = <5>;
> + funnel_in5: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm3_out>;
> + };
> + };
> + port@8 {
> + reg = <0>;
> + funnel_out: endpoint {
> + remote-endpoint = <&replicator_in>;
> + };
> + };
> + };
> + };
> +
> + etm@1a1c000 {
> + compatible = "arm,coresight-etm3x", "arm,primecell";
> + reg = <0x1a1c000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU0>;
> +
> + port {
> + etm0_out: endpoint {
> + remote-endpoint = <&funnel_in0>;
> + };
> + };
> + };
> +
> + etm@1a1d000 {
> + compatible = "arm,coresight-etm3x", "arm,primecell";
> + reg = <0x1a1d000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU1>;
> +
> + port {
> + etm1_out: endpoint {
> + remote-endpoint = <&funnel_in1>;
> + };
> + };
> + };
> +
> + etm@1a1e000 {
> + compatible = "arm,coresight-etm3x", "arm,primecell";
> + reg = <0x1a1e000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU2>;
> +
> + port {
> + etm2_out: endpoint {
> + remote-endpoint = <&funnel_in4>;
> + };
> + };
> + };
> +
> + etm@1a1f000 {
> + compatible = "arm,coresight-etm3x", "arm,primecell";
> + reg = <0x1a1f000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU3>;
> +
> + port {
> + etm3_out: endpoint {
> + remote-endpoint = <&funnel_in5>;
> + };
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
> index 268bd470c865..18469c632e2f 100644
> --- a/arch/arm/boot/dts/qcom-apq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
> @@ -4,6 +4,7 @@
> #include <dt-bindings/clock/qcom,gcc-msm8960.h>
> #include <dt-bindings/reset/qcom,gcc-msm8960.h>
> #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
> +#include <dt-bindings/clock/qcom,rpmcc.h>
> #include <dt-bindings/soc/qcom,gsbi.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> @@ -27,7 +28,7 @@
> #address-cells = <1>;
> #size-cells = <0>;
>
> - cpu@0 {
> + CPU0: cpu@0 {
> compatible = "qcom,krait";
> enable-method = "qcom,kpss-acc-v1";
> device_type = "cpu";
> @@ -38,7 +39,7 @@
> cpu-idle-states = <&CPU_SPC>;
> };
>
> - cpu@1 {
> + CPU1: cpu@1 {
> compatible = "qcom,krait";
> enable-method = "qcom,kpss-acc-v1";
> device_type = "cpu";
> @@ -49,7 +50,7 @@
> cpu-idle-states = <&CPU_SPC>;
> };
>
> - cpu@2 {
> + CPU2: cpu@2 {
> compatible = "qcom,krait";
> enable-method = "qcom,kpss-acc-v1";
> device_type = "cpu";
> @@ -60,7 +61,7 @@
> cpu-idle-states = <&CPU_SPC>;
> };
>
> - cpu@3 {
> + CPU3: cpu@3 {
> compatible = "qcom,krait";
> enable-method = "qcom,kpss-acc-v1";
> device_type = "cpu";
> @@ -1418,4 +1419,6 @@
> };
> };
> };
> +
> +#include "qcom-apq8064-coresight.dtsi"
> #include "qcom-apq8064-pins.dtsi"
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH] ARM: dts: qcom: Add apq8064 CoreSight components
@ 2016-11-17 19:04 ` Mathieu Poirier
0 siblings, 0 replies; 11+ messages in thread
From: Mathieu Poirier @ 2016-11-17 19:04 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Nov 17, 2016 at 05:36:09PM +0200, Georgi Djakov wrote:
> From: "Ivan T. Ivanov" <ivan.ivanov@linaro.org>
>
> Add initial set of CoreSight components found on Qualcomm's
> 8064 chipset.
>
> Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
> ---
> arch/arm/boot/dts/qcom-apq8064-coresight.dtsi | 196 ++++++++++++++++++++++++++
> arch/arm/boot/dts/qcom-apq8064.dtsi | 11 +-
> 2 files changed, 203 insertions(+), 4 deletions(-)
> create mode 100644 arch/arm/boot/dts/qcom-apq8064-coresight.dtsi
>
> diff --git a/arch/arm/boot/dts/qcom-apq8064-coresight.dtsi b/arch/arm/boot/dts/qcom-apq8064-coresight.dtsi
> new file mode 100644
> index 000000000000..9395fddb1bf0
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-apq8064-coresight.dtsi
> @@ -0,0 +1,196 @@
> +/*
> + * Copyright (c) 2015, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +&soc {
> +
> + etb at 1a01000 {
> + compatible = "coresight-etb10", "arm,primecell";
> + reg = <0x1a01000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + port {
> + etb_in: endpoint {
> + slave-mode;
> + remote-endpoint = <&replicator_out0>;
> + };
> + };
> + };
> +
> + tpiu at 1a03000 {
> + compatible = "arm,coresight-tpiu", "arm,primecell";
> + reg = <0x1a03000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + port {
> + tpiu_in: endpoint {
> + slave-mode;
> + remote-endpoint = <&replicator_out1>;
> + };
> + };
> + };
> +
> + replicator {
> + compatible = "arm,coresight-replicator";
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + replicator_out0: endpoint {
> + remote-endpoint = <&etb_in>;
> + };
> + };
> + port at 1 {
> + reg = <1>;
> + replicator_out1: endpoint {
> + remote-endpoint = <&tpiu_in>;
> + };
> + };
> + port at 2 {
> + reg = <0>;
> + replicator_in: endpoint {
> + slave-mode;
> + remote-endpoint = <&funnel_out>;
> + };
> + };
> + };
> + };
> +
> + funnel at 1a04000 {
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x1a04000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /*
> + * Not described input ports:
> + * 2 - connected to STM component
> + * 3 - not-connected
> + * 6 - not-connected
> + * 7 - not-connected
> + */
> + port at 0 {
> + reg = <0>;
> + funnel_in0: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm0_out>;
> + };
> + };
> + port at 1 {
> + reg = <1>;
> + funnel_in1: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm1_out>;
> + };
> + };
> + port at 4 {
> + reg = <4>;
> + funnel_in4: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm2_out>;
> + };
> + };
> + port at 5 {
> + reg = <5>;
> + funnel_in5: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm3_out>;
> + };
> + };
> + port at 8 {
> + reg = <0>;
> + funnel_out: endpoint {
> + remote-endpoint = <&replicator_in>;
> + };
> + };
> + };
> + };
> +
> + etm at 1a1c000 {
> + compatible = "arm,coresight-etm3x", "arm,primecell";
> + reg = <0x1a1c000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU0>;
> +
> + port {
> + etm0_out: endpoint {
> + remote-endpoint = <&funnel_in0>;
> + };
> + };
> + };
> +
> + etm at 1a1d000 {
> + compatible = "arm,coresight-etm3x", "arm,primecell";
> + reg = <0x1a1d000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU1>;
> +
> + port {
> + etm1_out: endpoint {
> + remote-endpoint = <&funnel_in1>;
> + };
> + };
> + };
> +
> + etm at 1a1e000 {
> + compatible = "arm,coresight-etm3x", "arm,primecell";
> + reg = <0x1a1e000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU2>;
> +
> + port {
> + etm2_out: endpoint {
> + remote-endpoint = <&funnel_in4>;
> + };
> + };
> + };
> +
> + etm at 1a1f000 {
> + compatible = "arm,coresight-etm3x", "arm,primecell";
> + reg = <0x1a1f000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU3>;
> +
> + port {
> + etm3_out: endpoint {
> + remote-endpoint = <&funnel_in5>;
> + };
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
> index 268bd470c865..18469c632e2f 100644
> --- a/arch/arm/boot/dts/qcom-apq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
> @@ -4,6 +4,7 @@
> #include <dt-bindings/clock/qcom,gcc-msm8960.h>
> #include <dt-bindings/reset/qcom,gcc-msm8960.h>
> #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
> +#include <dt-bindings/clock/qcom,rpmcc.h>
> #include <dt-bindings/soc/qcom,gsbi.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> @@ -27,7 +28,7 @@
> #address-cells = <1>;
> #size-cells = <0>;
>
> - cpu at 0 {
> + CPU0: cpu at 0 {
> compatible = "qcom,krait";
> enable-method = "qcom,kpss-acc-v1";
> device_type = "cpu";
> @@ -38,7 +39,7 @@
> cpu-idle-states = <&CPU_SPC>;
> };
>
> - cpu at 1 {
> + CPU1: cpu at 1 {
> compatible = "qcom,krait";
> enable-method = "qcom,kpss-acc-v1";
> device_type = "cpu";
> @@ -49,7 +50,7 @@
> cpu-idle-states = <&CPU_SPC>;
> };
>
> - cpu at 2 {
> + CPU2: cpu at 2 {
> compatible = "qcom,krait";
> enable-method = "qcom,kpss-acc-v1";
> device_type = "cpu";
> @@ -60,7 +61,7 @@
> cpu-idle-states = <&CPU_SPC>;
> };
>
> - cpu at 3 {
> + CPU3: cpu at 3 {
> compatible = "qcom,krait";
> enable-method = "qcom,kpss-acc-v1";
> device_type = "cpu";
> @@ -1418,4 +1419,6 @@
> };
> };
> };
> +
> +#include "qcom-apq8064-coresight.dtsi"
> #include "qcom-apq8064-pins.dtsi"
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] ARM: dts: qcom: Add apq8064 CoreSight components
2016-11-17 15:36 ` Georgi Djakov
@ 2016-11-17 22:16 ` Stephen Boyd
-1 siblings, 0 replies; 11+ messages in thread
From: Stephen Boyd @ 2016-11-17 22:16 UTC (permalink / raw)
To: Georgi Djakov, andy.gross
Cc: robh+dt, devicetree, mathieu.poirier, zhang.chunyan, iivanov.xz,
linux-arm-msm, linux-kernel, linux-arm-kernel
On 11/17/2016 07:36 AM, Georgi Djakov wrote:
> From: "Ivan T. Ivanov" <ivan.ivanov@linaro.org>
>
> Add initial set of CoreSight components found on Qualcomm's
> 8064 chipset.
>
> Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
> ---
> arch/arm/boot/dts/qcom-apq8064-coresight.dtsi | 196 ++++++++++++++++++++++++++
Why not put this inside the soc file? This would be the first time we
add a new file for something that's inside the SoC node that probably
won't change thereafter. At least for pins I slightly agree with having
a different file, we're adding more and more things there so it's nice
to have a consolidated place of all possible configurations to choose
from. But here it's mostly a static device description so what's the gain?
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH] ARM: dts: qcom: Add apq8064 CoreSight components
@ 2016-11-17 22:16 ` Stephen Boyd
0 siblings, 0 replies; 11+ messages in thread
From: Stephen Boyd @ 2016-11-17 22:16 UTC (permalink / raw)
To: linux-arm-kernel
On 11/17/2016 07:36 AM, Georgi Djakov wrote:
> From: "Ivan T. Ivanov" <ivan.ivanov@linaro.org>
>
> Add initial set of CoreSight components found on Qualcomm's
> 8064 chipset.
>
> Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
> ---
> arch/arm/boot/dts/qcom-apq8064-coresight.dtsi | 196 ++++++++++++++++++++++++++
Why not put this inside the soc file? This would be the first time we
add a new file for something that's inside the SoC node that probably
won't change thereafter. At least for pins I slightly agree with having
a different file, we're adding more and more things there so it's nice
to have a consolidated place of all possible configurations to choose
from. But here it's mostly a static device description so what's the gain?
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] ARM: dts: qcom: Add apq8064 CoreSight components
2016-11-17 22:16 ` Stephen Boyd
(?)
@ 2016-11-18 12:36 ` Georgi Djakov
-1 siblings, 0 replies; 11+ messages in thread
From: Georgi Djakov @ 2016-11-18 12:36 UTC (permalink / raw)
To: Stephen Boyd, andy.gross-QSEj5FYQhm4dnm+yROfE0A
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
devicetree-u79uwXL29TY76Z2rM5mHXA,
mathieu.poirier-QSEj5FYQhm4dnm+yROfE0A,
zhang.chunyan-QSEj5FYQhm4dnm+yROfE0A,
iivanov.xz-Re5JQEeQqe8AvxtiuMwx3w,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
On 11/18/2016 12:16 AM, Stephen Boyd wrote:
> On 11/17/2016 07:36 AM, Georgi Djakov wrote:
>> From: "Ivan T. Ivanov" <ivan.ivanov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>>
>> Add initial set of CoreSight components found on Qualcomm's
>> 8064 chipset.
>>
>> Signed-off-by: Ivan T. Ivanov <ivan.ivanov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>> Signed-off-by: Georgi Djakov <georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>> ---
>> arch/arm/boot/dts/qcom-apq8064-coresight.dtsi | 196 ++++++++++++++++++++++++++
>
> Why not put this inside the soc file? This would be the first time we
> add a new file for something that's inside the SoC node that probably
> won't change thereafter. At least for pins I slightly agree with having
> a different file, we're adding more and more things there so it's nice
> to have a consolidated place of all possible configurations to choose
> from. But here it's mostly a static device description so what's the gain?
Ok, after thinking more about this and looking at other soc dtsi files i
agree with you. Will update!
Thanks!
Georgi
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] ARM: dts: qcom: Add apq8064 CoreSight components
@ 2016-11-18 12:36 ` Georgi Djakov
0 siblings, 0 replies; 11+ messages in thread
From: Georgi Djakov @ 2016-11-18 12:36 UTC (permalink / raw)
To: Stephen Boyd, andy.gross
Cc: robh+dt, devicetree, mathieu.poirier, zhang.chunyan, iivanov.xz,
linux-arm-msm, linux-kernel, linux-arm-kernel
On 11/18/2016 12:16 AM, Stephen Boyd wrote:
> On 11/17/2016 07:36 AM, Georgi Djakov wrote:
>> From: "Ivan T. Ivanov" <ivan.ivanov@linaro.org>
>>
>> Add initial set of CoreSight components found on Qualcomm's
>> 8064 chipset.
>>
>> Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
>> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
>> ---
>> arch/arm/boot/dts/qcom-apq8064-coresight.dtsi | 196 ++++++++++++++++++++++++++
>
> Why not put this inside the soc file? This would be the first time we
> add a new file for something that's inside the SoC node that probably
> won't change thereafter. At least for pins I slightly agree with having
> a different file, we're adding more and more things there so it's nice
> to have a consolidated place of all possible configurations to choose
> from. But here it's mostly a static device description so what's the gain?
Ok, after thinking more about this and looking at other soc dtsi files i
agree with you. Will update!
Thanks!
Georgi
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH] ARM: dts: qcom: Add apq8064 CoreSight components
@ 2016-11-18 12:36 ` Georgi Djakov
0 siblings, 0 replies; 11+ messages in thread
From: Georgi Djakov @ 2016-11-18 12:36 UTC (permalink / raw)
To: linux-arm-kernel
On 11/18/2016 12:16 AM, Stephen Boyd wrote:
> On 11/17/2016 07:36 AM, Georgi Djakov wrote:
>> From: "Ivan T. Ivanov" <ivan.ivanov@linaro.org>
>>
>> Add initial set of CoreSight components found on Qualcomm's
>> 8064 chipset.
>>
>> Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
>> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
>> ---
>> arch/arm/boot/dts/qcom-apq8064-coresight.dtsi | 196 ++++++++++++++++++++++++++
>
> Why not put this inside the soc file? This would be the first time we
> add a new file for something that's inside the SoC node that probably
> won't change thereafter. At least for pins I slightly agree with having
> a different file, we're adding more and more things there so it's nice
> to have a consolidated place of all possible configurations to choose
> from. But here it's mostly a static device description so what's the gain?
Ok, after thinking more about this and looking at other soc dtsi files i
agree with you. Will update!
Thanks!
Georgi
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2016-11-18 12:36 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-11-17 15:36 [PATCH] ARM: dts: qcom: Add apq8064 CoreSight components Georgi Djakov
2016-11-17 15:36 ` Georgi Djakov
2016-11-17 15:36 ` Georgi Djakov
[not found] ` <20161117153609.11705-1-georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-11-17 19:04 ` Mathieu Poirier
2016-11-17 19:04 ` Mathieu Poirier
2016-11-17 19:04 ` Mathieu Poirier
2016-11-17 22:16 ` Stephen Boyd
2016-11-17 22:16 ` Stephen Boyd
[not found] ` <d466f591-baac-c734-a49b-8aab763c1876-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-11-18 12:36 ` Georgi Djakov
2016-11-18 12:36 ` Georgi Djakov
2016-11-18 12:36 ` Georgi Djakov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.