From: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
To: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>,
Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>,
Sebastian Hesselbarth
<sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Gregory CLEMENT
<gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: Thomas Petazzoni
<thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v3 01/13] ARM: dts: armada-375: Add node labels
Date: Fri, 18 Nov 2016 00:08:18 +0100 [thread overview]
Message-ID: <20161117230830.31047-2-gregory.clement@free-electrons.com> (raw)
In-Reply-To: <20161117230830.31047-1-gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
As it was previously done for kirkwood and for aramda 370/XP, this adds
missing node labels to Armada 375 and SoC specific nodes to allow to
reference them more easily.
Signed-off-by: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
arch/arm/boot/dts/armada-375.dtsi | 62 +++++++++++++++++++--------------------
1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 45fa92f9cf5c..e016ff3ed970 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -84,12 +84,12 @@
#size-cells = <0>;
enable-method = "marvell,armada-375-smp";
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
@@ -115,7 +115,7 @@
reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
};
- devbus-bootcs {
+ devbus_bootcs: devbus-bootcs {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
@@ -125,7 +125,7 @@
status = "disabled";
};
- devbus-cs0 {
+ devbus_cs0: devbus-cs0 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
@@ -135,7 +135,7 @@
status = "disabled";
};
- devbus-cs1 {
+ devbus_cs1: devbus-cs1 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
@@ -145,7 +145,7 @@
status = "disabled";
};
- devbus-cs2 {
+ devbus_cs2: devbus-cs2 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
@@ -155,7 +155,7 @@
status = "disabled";
};
- devbus-cs3 {
+ devbus_cs3: devbus-cs3 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
@@ -182,12 +182,12 @@
prefetch-data = <1>;
};
- scu@c000 {
+ scu: scu@c000 {
compatible = "arm,cortex-a9-scu";
reg = <0xc000 0x58>;
};
- timer@c600 {
+ timer0: timer@c600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xc600 0x20>;
interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
@@ -203,7 +203,7 @@
<0xc100 0x100>;
};
- mdio {
+ mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
@@ -212,7 +212,7 @@
};
/* Network controller */
- ethernet@f0000 {
+ ethernet: ethernet@f0000 {
compatible = "marvell,armada-375-pp2";
reg = <0xf0000 0xa000>, /* Packet Processor regs */
<0xc0000 0x3060>, /* LMS regs */
@@ -235,7 +235,7 @@
};
};
- rtc@10300 {
+ rtc: rtc@10300 {
compatible = "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
@@ -307,7 +307,7 @@
status = "disabled";
};
- pinctrl {
+ pinctrl: pinctrl {
compatible = "marvell,mv88f6720-pinctrl";
reg = <0x18000 0x24>;
@@ -382,7 +382,7 @@
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
};
- system-controller@18200 {
+ systemc: system-controller@18200 {
compatible = "marvell,armada-375-system-controller";
reg = <0x18200 0x100>;
};
@@ -415,7 +415,7 @@
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
};
- timer@20300 {
+ timer1: timer@20300 {
compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
reg = <0x20300 0x30>, <0x21040 0x30>;
interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
@@ -428,24 +428,24 @@
clock-names = "nbclk", "fixed";
};
- watchdog@20300 {
+ watchdog: watchdog@20300 {
compatible = "marvell,armada-375-wdt";
reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
clocks = <&coreclk 0>, <&refclk>;
clock-names = "nbclk", "fixed";
};
- cpurst@20800 {
+ cpurst: cpurst@20800 {
compatible = "marvell,armada-370-cpu-reset";
reg = <0x20800 0x10>;
};
- coherency-fabric@21010 {
+ coherencyfab: coherency-fabric@21010 {
compatible = "marvell,armada-375-coherency-fabric";
reg = <0x21010 0x1c>;
};
- usb@50000 {
+ usb0: usb@50000 {
compatible = "marvell,orion-ehci";
reg = <0x50000 0x500>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
@@ -455,7 +455,7 @@
status = "disabled";
};
- usb@54000 {
+ usb1: usb@54000 {
compatible = "marvell,orion-ehci";
reg = <0x54000 0x500>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
@@ -463,7 +463,7 @@
status = "disabled";
};
- usb3@58000 {
+ usb2: usb3@58000 {
compatible = "marvell,armada-375-xhci";
reg = <0x58000 0x20000>,<0x5b880 0x80>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
@@ -473,7 +473,7 @@
status = "disabled";
};
- xor@60800 {
+ xor0: xor@60800 {
compatible = "marvell,orion-xor";
reg = <0x60800 0x100
0x60A00 0x100>;
@@ -493,7 +493,7 @@
};
};
- xor@60900 {
+ xor1: xor@60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
0x60b00 0x100>;
@@ -513,7 +513,7 @@
};
};
- crypto@90000 {
+ cesa: crypto@90000 {
compatible = "marvell,armada-375-crypto";
reg = <0x90000 0x10000>;
reg-names = "regs";
@@ -528,7 +528,7 @@
marvell,crypto-sram-size = <0x800>;
};
- sata@a0000 {
+ sata: sata@a0000 {
compatible = "marvell,armada-370-sata";
reg = <0xa0000 0x5000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -537,7 +537,7 @@
status = "disabled";
};
- nand@d0000 {
+ nand: nand@d0000 {
compatible = "marvell,armada370-nand";
reg = <0xd0000 0x54>;
#address-cells = <1>;
@@ -547,7 +547,7 @@
status = "disabled";
};
- mvsdio@d4000 {
+ sdio: mvsdio@d4000 {
compatible = "marvell,orion-sdio";
reg = <0xd4000 0x200>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -559,7 +559,7 @@
status = "disabled";
};
- thermal@e8078 {
+ thermal: thermal@e8078 {
compatible = "marvell,armada375-thermal";
reg = <0xe8078 0x4>, <0xe807c 0x8>;
status = "okay";
@@ -580,7 +580,7 @@
};
};
- pcie-controller {
+ pciec: pcie-controller {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
@@ -599,7 +599,7 @@
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO */>;
- pcie@1,0 {
+ pcie0: pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
@@ -616,7 +616,7 @@
status = "disabled";
};
- pcie@2,0 {
+ pcie1: pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: gregory.clement@free-electrons.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 01/13] ARM: dts: armada-375: Add node labels
Date: Fri, 18 Nov 2016 00:08:18 +0100 [thread overview]
Message-ID: <20161117230830.31047-2-gregory.clement@free-electrons.com> (raw)
In-Reply-To: <20161117230830.31047-1-gregory.clement@free-electrons.com>
As it was previously done for kirkwood and for aramda 370/XP, this adds
missing node labels to Armada 375 and SoC specific nodes to allow to
reference them more easily.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-375.dtsi | 62 +++++++++++++++++++--------------------
1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 45fa92f9cf5c..e016ff3ed970 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -84,12 +84,12 @@
#size-cells = <0>;
enable-method = "marvell,armada-375-smp";
- cpu at 0 {
+ cpu0: cpu at 0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
};
- cpu at 1 {
+ cpu1: cpu at 1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
@@ -115,7 +115,7 @@
reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
};
- devbus-bootcs {
+ devbus_bootcs: devbus-bootcs {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
@@ -125,7 +125,7 @@
status = "disabled";
};
- devbus-cs0 {
+ devbus_cs0: devbus-cs0 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
@@ -135,7 +135,7 @@
status = "disabled";
};
- devbus-cs1 {
+ devbus_cs1: devbus-cs1 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
@@ -145,7 +145,7 @@
status = "disabled";
};
- devbus-cs2 {
+ devbus_cs2: devbus-cs2 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
@@ -155,7 +155,7 @@
status = "disabled";
};
- devbus-cs3 {
+ devbus_cs3: devbus-cs3 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
@@ -182,12 +182,12 @@
prefetch-data = <1>;
};
- scu at c000 {
+ scu: scu at c000 {
compatible = "arm,cortex-a9-scu";
reg = <0xc000 0x58>;
};
- timer at c600 {
+ timer0: timer at c600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xc600 0x20>;
interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
@@ -203,7 +203,7 @@
<0xc100 0x100>;
};
- mdio {
+ mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
@@ -212,7 +212,7 @@
};
/* Network controller */
- ethernet at f0000 {
+ ethernet: ethernet at f0000 {
compatible = "marvell,armada-375-pp2";
reg = <0xf0000 0xa000>, /* Packet Processor regs */
<0xc0000 0x3060>, /* LMS regs */
@@ -235,7 +235,7 @@
};
};
- rtc at 10300 {
+ rtc: rtc at 10300 {
compatible = "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
@@ -307,7 +307,7 @@
status = "disabled";
};
- pinctrl {
+ pinctrl: pinctrl {
compatible = "marvell,mv88f6720-pinctrl";
reg = <0x18000 0x24>;
@@ -382,7 +382,7 @@
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
};
- system-controller at 18200 {
+ systemc: system-controller at 18200 {
compatible = "marvell,armada-375-system-controller";
reg = <0x18200 0x100>;
};
@@ -415,7 +415,7 @@
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
};
- timer at 20300 {
+ timer1: timer at 20300 {
compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
reg = <0x20300 0x30>, <0x21040 0x30>;
interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
@@ -428,24 +428,24 @@
clock-names = "nbclk", "fixed";
};
- watchdog at 20300 {
+ watchdog: watchdog at 20300 {
compatible = "marvell,armada-375-wdt";
reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
clocks = <&coreclk 0>, <&refclk>;
clock-names = "nbclk", "fixed";
};
- cpurst at 20800 {
+ cpurst: cpurst at 20800 {
compatible = "marvell,armada-370-cpu-reset";
reg = <0x20800 0x10>;
};
- coherency-fabric at 21010 {
+ coherencyfab: coherency-fabric at 21010 {
compatible = "marvell,armada-375-coherency-fabric";
reg = <0x21010 0x1c>;
};
- usb at 50000 {
+ usb0: usb at 50000 {
compatible = "marvell,orion-ehci";
reg = <0x50000 0x500>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
@@ -455,7 +455,7 @@
status = "disabled";
};
- usb at 54000 {
+ usb1: usb at 54000 {
compatible = "marvell,orion-ehci";
reg = <0x54000 0x500>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
@@ -463,7 +463,7 @@
status = "disabled";
};
- usb3 at 58000 {
+ usb2: usb3 at 58000 {
compatible = "marvell,armada-375-xhci";
reg = <0x58000 0x20000>,<0x5b880 0x80>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
@@ -473,7 +473,7 @@
status = "disabled";
};
- xor at 60800 {
+ xor0: xor at 60800 {
compatible = "marvell,orion-xor";
reg = <0x60800 0x100
0x60A00 0x100>;
@@ -493,7 +493,7 @@
};
};
- xor at 60900 {
+ xor1: xor at 60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
0x60b00 0x100>;
@@ -513,7 +513,7 @@
};
};
- crypto at 90000 {
+ cesa: crypto at 90000 {
compatible = "marvell,armada-375-crypto";
reg = <0x90000 0x10000>;
reg-names = "regs";
@@ -528,7 +528,7 @@
marvell,crypto-sram-size = <0x800>;
};
- sata at a0000 {
+ sata: sata at a0000 {
compatible = "marvell,armada-370-sata";
reg = <0xa0000 0x5000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -537,7 +537,7 @@
status = "disabled";
};
- nand at d0000 {
+ nand: nand at d0000 {
compatible = "marvell,armada370-nand";
reg = <0xd0000 0x54>;
#address-cells = <1>;
@@ -547,7 +547,7 @@
status = "disabled";
};
- mvsdio at d4000 {
+ sdio: mvsdio at d4000 {
compatible = "marvell,orion-sdio";
reg = <0xd4000 0x200>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -559,7 +559,7 @@
status = "disabled";
};
- thermal at e8078 {
+ thermal: thermal at e8078 {
compatible = "marvell,armada375-thermal";
reg = <0xe8078 0x4>, <0xe807c 0x8>;
status = "okay";
@@ -580,7 +580,7 @@
};
};
- pcie-controller {
+ pciec: pcie-controller {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
@@ -599,7 +599,7 @@
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO */>;
- pcie at 1,0 {
+ pcie0: pcie at 1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
@@ -616,7 +616,7 @@
status = "disabled";
};
- pcie at 2,0 {
+ pcie1: pcie at 2,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
--
2.10.2
next prev parent reply other threads:[~2016-11-17 23:08 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-17 23:08 [PATCH v3 00/13] Various Armada 375 DT warning fixup Gregory CLEMENT
2016-11-17 23:08 ` Gregory CLEMENT
[not found] ` <20161117230830.31047-1-gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2016-11-17 23:08 ` Gregory CLEMENT [this message]
2016-11-17 23:08 ` [PATCH v3 01/13] ARM: dts: armada-375: Add node labels Gregory CLEMENT
2016-11-17 23:08 ` [PATCH v3 02/13] ARM: dts: armada-375: Use the " Gregory CLEMENT
2016-11-17 23:08 ` Gregory CLEMENT
2016-11-17 23:08 ` [PATCH v3 03/13] ARM: dts: armada-375: Fixup mdio DT warning Gregory CLEMENT
2016-11-17 23:08 ` Gregory CLEMENT
2016-11-17 23:08 ` [PATCH v3 04/13] ARM: dts: armada-375: Fixup bootrom " Gregory CLEMENT
2016-11-17 23:08 ` Gregory CLEMENT
2016-11-17 23:08 ` [PATCH v3 05/13] ARM: dts: armada-375: Fixup devbus " Gregory CLEMENT
2016-11-17 23:08 ` Gregory CLEMENT
2016-11-17 23:08 ` [PATCH v3 06/13] ARM: dts: armada-375: Fixup sa-ram " Gregory CLEMENT
2016-11-17 23:08 ` Gregory CLEMENT
[not found] ` <20161117230830.31047-7-gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2016-11-18 8:59 ` Thomas Petazzoni
2016-11-18 8:59 ` Thomas Petazzoni
[not found] ` <20161118095925.770496c3-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2016-11-18 12:06 ` Gregory CLEMENT
2016-11-18 12:06 ` Gregory CLEMENT
2016-11-18 13:35 ` Thomas Petazzoni
2016-11-18 13:35 ` Thomas Petazzoni
2016-11-17 23:08 ` [PATCH v3 07/13] ARM: dts: armada-375: Fixup pcie DT warnings Gregory CLEMENT
2016-11-17 23:08 ` Gregory CLEMENT
2016-11-17 23:08 ` [PATCH v3 08/13] ARM: dts: armada-375: Fixup pinctrl " Gregory CLEMENT
2016-11-17 23:08 ` Gregory CLEMENT
2016-11-17 23:08 ` [PATCH v3 09/13] ARM: dts: armada-375: Fixup soc DT warning Gregory CLEMENT
2016-11-17 23:08 ` Gregory CLEMENT
[not found] ` <20161117230830.31047-10-gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2016-11-18 8:54 ` Thomas Petazzoni
2016-11-18 8:54 ` Thomas Petazzoni
[not found] ` <20161118095455.00bfe007-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2016-11-18 9:01 ` Gregory CLEMENT
2016-11-18 9:01 ` Gregory CLEMENT
[not found] ` <87d1htb1qr.fsf-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2016-11-18 9:12 ` Thomas Petazzoni
2016-11-18 9:12 ` Thomas Petazzoni
[not found] ` <20161118101248.784eff2b-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2016-11-18 9:38 ` Gregory CLEMENT
2016-11-18 9:38 ` Gregory CLEMENT
[not found] ` <877f81b013.fsf-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2016-11-18 13:38 ` Thomas Petazzoni
2016-11-18 13:38 ` Thomas Petazzoni
2016-11-17 23:08 ` [PATCH v3 10/13] ARM: dts: armada-375: Fixup internal-regs " Gregory CLEMENT
2016-11-17 23:08 ` Gregory CLEMENT
2016-11-17 23:08 ` [PATCH v3 11/13] ARM: dts: armada-375: Remove skeleton.dtsi Gregory CLEMENT
2016-11-17 23:08 ` Gregory CLEMENT
2016-11-17 23:08 ` [PATCH v3 12/13] ARM: dts: armada-375: Fixup memory DT warning Gregory CLEMENT
2016-11-17 23:08 ` Gregory CLEMENT
2016-11-17 23:08 ` [PATCH v3 13/13] ARM: dts: armada-375: Fixup ethernet child " Gregory CLEMENT
2016-11-17 23:08 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161117230830.31047-2-gregory.clement@free-electrons.com \
--to=gregory.clement-wi1+55scjutkeb57/3fjtnbpr1lh4cv8@public.gmane.org \
--cc=andrew-g2DYL2Zd6BY@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.