[GIT PULL 1/10] mailbox: Add Tegra HSP driver

[GIT PULL 1/10] mailbox: Add Tegra HSP driver

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-mailbox

for you to fetch changes up to 68050eb6c611527232fe5574c7306e97e47499ef:

  mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells() (2016-11-18 14:32:13 +0100)

Thanks,
Thierry

----------------------------------------------------------------
mailbox: Add Tegra HSP driver

This contains the device tree bindings and a driver for the Tegra HSP, a
hardware block that provides hardware synchronization primitives and is
the foundation for inter-processor communication between CPU and BPMP.

----------------------------------------------------------------
Dan Carpenter (1):
      mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()

Joseph Lo (2):
      soc/tegra: Add Tegra186 support
      dt-bindings: mailbox: Add Tegra HSP binding

Thierry Reding (2):
      Merge branch 'for-4.10/soc' into for-4.10/mailbox
      mailbox: Add Tegra HSP driver

 .../bindings/mailbox/nvidia,tegra186-hsp.txt       |  52 +++
 drivers/mailbox/Kconfig                            |   9 +
 drivers/mailbox/Makefile                           |   2 +
 drivers/mailbox/tegra-hsp.c                        | 479 +++++++++++++++++++++
 drivers/soc/tegra/Kconfig                          |  14 +
 include/dt-bindings/mailbox/tegra186-hsp.h         |  24 ++
 6 files changed, 580 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
 create mode 100644 drivers/mailbox/tegra-hsp.c
 create mode 100644 include/dt-bindings/mailbox/tegra186-hsp.h

[GIT PULL 1/10] mailbox: Add Tegra HSP driver

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-mailbox

for you to fetch changes up to 68050eb6c611527232fe5574c7306e97e47499ef:

  mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells() (2016-11-18 14:32:13 +0100)

Thanks,
Thierry

----------------------------------------------------------------
mailbox: Add Tegra HSP driver

This contains the device tree bindings and a driver for the Tegra HSP, a
hardware block that provides hardware synchronization primitives and is
the foundation for inter-processor communication between CPU and BPMP.

----------------------------------------------------------------
Dan Carpenter (1):
      mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()

Joseph Lo (2):
      soc/tegra: Add Tegra186 support
      dt-bindings: mailbox: Add Tegra HSP binding

Thierry Reding (2):
      Merge branch 'for-4.10/soc' into for-4.10/mailbox
      mailbox: Add Tegra HSP driver

 .../bindings/mailbox/nvidia,tegra186-hsp.txt       |  52 +++
 drivers/mailbox/Kconfig                            |   9 +
 drivers/mailbox/Makefile                           |   2 +
 drivers/mailbox/tegra-hsp.c                        | 479 +++++++++++++++++++++
 drivers/soc/tegra/Kconfig                          |  14 +
 include/dt-bindings/mailbox/tegra186-hsp.h         |  24 ++
 6 files changed, 580 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
 create mode 100644 drivers/mailbox/tegra-hsp.c
 create mode 100644 include/dt-bindings/mailbox/tegra186-hsp.h

[GIT PULL 2/10] firmware: Add Tegra IVC and BPMP support

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-firmware

for you to fetch changes up to b704ed8095ee91af5f3f7343bb3be23aae1cb26d:

  dt-bindings: firmware: Allow child nodes inside the Tegra BPMP (2016-11-18 14:33:44 +0100)

Thanks,
Thierry

----------------------------------------------------------------
firmware: Add Tegra IVC and BPMP support

IVC is an inter-processor communication protocol that uses shared memory
to exchange data between processors. The BPMP driver makes use of this
to communicate with the Boot and Power Management Processor (BPMP) and
uses an additional hardware synchronization primitive from the HSP block
to signal availability of new data (doorbell).

Firmware running on the BPMP implements a number of services such as the
control of clocks and resets within the system, or the ability to ungate
or gate power partitions.

----------------------------------------------------------------
Dan Carpenter (1):
      mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()

Joseph Lo (3):
      soc/tegra: Add Tegra186 support
      dt-bindings: mailbox: Add Tegra HSP binding
      dt-bindings: firmware: Add bindings for Tegra BPMP

Stephen Warren (2):
      dt-bindings: Add power domains to Tegra BPMP firmware
      dt-bindings: firmware: Allow child nodes inside the Tegra BPMP

Thierry Reding (5):
      Merge branch 'for-4.10/soc' into for-4.10/mailbox
      mailbox: Add Tegra HSP driver
      Merge branch 'for-4.10/mailbox' into for-4.10/firmware
      firmware: tegra: Add IVC library
      firmware: tegra: Add BPMP support

 .../bindings/firmware/nvidia,tegra186-bpmp.txt     |  108 ++
 .../bindings/mailbox/nvidia,tegra186-hsp.txt       |   52 +
 drivers/firmware/Kconfig                           |    1 +
 drivers/firmware/Makefile                          |    1 +
 drivers/firmware/tegra/Kconfig                     |   25 +
 drivers/firmware/tegra/Makefile                    |    2 +
 drivers/firmware/tegra/bpmp.c                      |  868 +++++++++++
 drivers/firmware/tegra/ivc.c                       |  695 +++++++++
 drivers/mailbox/Kconfig                            |    9 +
 drivers/mailbox/Makefile                           |    2 +
 drivers/mailbox/tegra-hsp.c                        |  479 ++++++
 drivers/soc/tegra/Kconfig                          |   14 +
 include/dt-bindings/clock/tegra186-clock.h         |  940 ++++++++++++
 include/dt-bindings/mailbox/tegra186-hsp.h         |   24 +
 include/dt-bindings/power/tegra186-powergate.h     |   39 +
 include/dt-bindings/reset/tegra186-reset.h         |  217 +++
 include/soc/tegra/bpmp-abi.h                       | 1601 ++++++++++++++++++++
 include/soc/tegra/bpmp.h                           |  141 ++
 include/soc/tegra/ivc.h                            |  109 ++
 19 files changed, 5327 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
 create mode 100644 Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
 create mode 100644 drivers/firmware/tegra/Kconfig
 create mode 100644 drivers/firmware/tegra/Makefile
 create mode 100644 drivers/firmware/tegra/bpmp.c
 create mode 100644 drivers/firmware/tegra/ivc.c
 create mode 100644 drivers/mailbox/tegra-hsp.c
 create mode 100644 include/dt-bindings/clock/tegra186-clock.h
 create mode 100644 include/dt-bindings/mailbox/tegra186-hsp.h
 create mode 100644 include/dt-bindings/power/tegra186-powergate.h
 create mode 100644 include/dt-bindings/reset/tegra186-reset.h
 create mode 100644 include/soc/tegra/bpmp-abi.h
 create mode 100644 include/soc/tegra/bpmp.h
 create mode 100644 include/soc/tegra/ivc.h

[GIT PULL 2/10] firmware: Add Tegra IVC and BPMP support

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-firmware

for you to fetch changes up to b704ed8095ee91af5f3f7343bb3be23aae1cb26d:

  dt-bindings: firmware: Allow child nodes inside the Tegra BPMP (2016-11-18 14:33:44 +0100)

Thanks,
Thierry

----------------------------------------------------------------
firmware: Add Tegra IVC and BPMP support

IVC is an inter-processor communication protocol that uses shared memory
to exchange data between processors. The BPMP driver makes use of this
to communicate with the Boot and Power Management Processor (BPMP) and
uses an additional hardware synchronization primitive from the HSP block
to signal availability of new data (doorbell).

Firmware running on the BPMP implements a number of services such as the
control of clocks and resets within the system, or the ability to ungate
or gate power partitions.

----------------------------------------------------------------
Dan Carpenter (1):
      mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()

Joseph Lo (3):
      soc/tegra: Add Tegra186 support
      dt-bindings: mailbox: Add Tegra HSP binding
      dt-bindings: firmware: Add bindings for Tegra BPMP

Stephen Warren (2):
      dt-bindings: Add power domains to Tegra BPMP firmware
      dt-bindings: firmware: Allow child nodes inside the Tegra BPMP

Thierry Reding (5):
      Merge branch 'for-4.10/soc' into for-4.10/mailbox
      mailbox: Add Tegra HSP driver
      Merge branch 'for-4.10/mailbox' into for-4.10/firmware
      firmware: tegra: Add IVC library
      firmware: tegra: Add BPMP support

 .../bindings/firmware/nvidia,tegra186-bpmp.txt     |  108 ++
 .../bindings/mailbox/nvidia,tegra186-hsp.txt       |   52 +
 drivers/firmware/Kconfig                           |    1 +
 drivers/firmware/Makefile                          |    1 +
 drivers/firmware/tegra/Kconfig                     |   25 +
 drivers/firmware/tegra/Makefile                    |    2 +
 drivers/firmware/tegra/bpmp.c                      |  868 +++++++++++
 drivers/firmware/tegra/ivc.c                       |  695 +++++++++
 drivers/mailbox/Kconfig                            |    9 +
 drivers/mailbox/Makefile                           |    2 +
 drivers/mailbox/tegra-hsp.c                        |  479 ++++++
 drivers/soc/tegra/Kconfig                          |   14 +
 include/dt-bindings/clock/tegra186-clock.h         |  940 ++++++++++++
 include/dt-bindings/mailbox/tegra186-hsp.h         |   24 +
 include/dt-bindings/power/tegra186-powergate.h     |   39 +
 include/dt-bindings/reset/tegra186-reset.h         |  217 +++
 include/soc/tegra/bpmp-abi.h                       | 1601 ++++++++++++++++++++
 include/soc/tegra/bpmp.h                           |  141 ++
 include/soc/tegra/ivc.h                            |  109 ++
 19 files changed, 5327 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
 create mode 100644 Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
 create mode 100644 drivers/firmware/tegra/Kconfig
 create mode 100644 drivers/firmware/tegra/Makefile
 create mode 100644 drivers/firmware/tegra/bpmp.c
 create mode 100644 drivers/firmware/tegra/ivc.c
 create mode 100644 drivers/mailbox/tegra-hsp.c
 create mode 100644 include/dt-bindings/clock/tegra186-clock.h
 create mode 100644 include/dt-bindings/mailbox/tegra186-hsp.h
 create mode 100644 include/dt-bindings/power/tegra186-powergate.h
 create mode 100644 include/dt-bindings/reset/tegra186-reset.h
 create mode 100644 include/soc/tegra/bpmp-abi.h
 create mode 100644 include/soc/tegra/bpmp.h
 create mode 100644 include/soc/tegra/ivc.h

[GIT PULL 3/10] reset: Add Tegra BPMP reset driver

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-reset

for you to fetch changes up to dc606c5205536a828c17bd96f06559dafaf75fb7:

  reset: Add Tegra BPMP reset driver (2016-11-18 14:34:56 +0100)

Thanks,
Thierry

----------------------------------------------------------------
reset: Add Tegra BPMP reset driver

This contains a patch which implements a reset driver using the services
provided by the BPMP firmware (via the MRQ_RESET request).

----------------------------------------------------------------
Dan Carpenter (1):
      mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()

Joseph Lo (3):
      soc/tegra: Add Tegra186 support
      dt-bindings: mailbox: Add Tegra HSP binding
      dt-bindings: firmware: Add bindings for Tegra BPMP

Stephen Warren (2):
      dt-bindings: Add power domains to Tegra BPMP firmware
      dt-bindings: firmware: Allow child nodes inside the Tegra BPMP

Thierry Reding (7):
      Merge branch 'for-4.10/soc' into for-4.10/mailbox
      mailbox: Add Tegra HSP driver
      Merge branch 'for-4.10/mailbox' into for-4.10/firmware
      firmware: tegra: Add IVC library
      firmware: tegra: Add BPMP support
      Merge branch 'for-4.10/firmware' into for-4.10/reset
      reset: Add Tegra BPMP reset driver

 .../bindings/firmware/nvidia,tegra186-bpmp.txt     |  108 ++
 .../bindings/mailbox/nvidia,tegra186-hsp.txt       |   52 +
 drivers/firmware/Kconfig                           |    1 +
 drivers/firmware/Makefile                          |    1 +
 drivers/firmware/tegra/Kconfig                     |   25 +
 drivers/firmware/tegra/Makefile                    |    2 +
 drivers/firmware/tegra/bpmp.c                      |  868 +++++++++++
 drivers/firmware/tegra/ivc.c                       |  695 +++++++++
 drivers/mailbox/Kconfig                            |    9 +
 drivers/mailbox/Makefile                           |    2 +
 drivers/mailbox/tegra-hsp.c                        |  479 ++++++
 drivers/reset/Kconfig                              |    1 +
 drivers/reset/Makefile                             |    1 +
 drivers/reset/tegra/Kconfig                        |    2 +
 drivers/reset/tegra/Makefile                       |    1 +
 drivers/reset/tegra/reset-bpmp.c                   |   71 +
 drivers/soc/tegra/Kconfig                          |   14 +
 include/dt-bindings/clock/tegra186-clock.h         |  940 ++++++++++++
 include/dt-bindings/mailbox/tegra186-hsp.h         |   24 +
 include/dt-bindings/power/tegra186-powergate.h     |   39 +
 include/dt-bindings/reset/tegra186-reset.h         |  217 +++
 include/soc/tegra/bpmp-abi.h                       | 1601 ++++++++++++++++++++
 include/soc/tegra/bpmp.h                           |  141 ++
 include/soc/tegra/ivc.h                            |  109 ++
 24 files changed, 5403 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
 create mode 100644 Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
 create mode 100644 drivers/firmware/tegra/Kconfig
 create mode 100644 drivers/firmware/tegra/Makefile
 create mode 100644 drivers/firmware/tegra/bpmp.c
 create mode 100644 drivers/firmware/tegra/ivc.c
 create mode 100644 drivers/mailbox/tegra-hsp.c
 create mode 100644 drivers/reset/tegra/Kconfig
 create mode 100644 drivers/reset/tegra/Makefile
 create mode 100644 drivers/reset/tegra/reset-bpmp.c
 create mode 100644 include/dt-bindings/clock/tegra186-clock.h
 create mode 100644 include/dt-bindings/mailbox/tegra186-hsp.h
 create mode 100644 include/dt-bindings/power/tegra186-powergate.h
 create mode 100644 include/dt-bindings/reset/tegra186-reset.h
 create mode 100644 include/soc/tegra/bpmp-abi.h
 create mode 100644 include/soc/tegra/bpmp.h
 create mode 100644 include/soc/tegra/ivc.h

[GIT PULL 3/10] reset: Add Tegra BPMP reset driver

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-reset

for you to fetch changes up to dc606c5205536a828c17bd96f06559dafaf75fb7:

  reset: Add Tegra BPMP reset driver (2016-11-18 14:34:56 +0100)

Thanks,
Thierry

----------------------------------------------------------------
reset: Add Tegra BPMP reset driver

This contains a patch which implements a reset driver using the services
provided by the BPMP firmware (via the MRQ_RESET request).

----------------------------------------------------------------
Dan Carpenter (1):
      mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()

Joseph Lo (3):
      soc/tegra: Add Tegra186 support
      dt-bindings: mailbox: Add Tegra HSP binding
      dt-bindings: firmware: Add bindings for Tegra BPMP

Stephen Warren (2):
      dt-bindings: Add power domains to Tegra BPMP firmware
      dt-bindings: firmware: Allow child nodes inside the Tegra BPMP

Thierry Reding (7):
      Merge branch 'for-4.10/soc' into for-4.10/mailbox
      mailbox: Add Tegra HSP driver
      Merge branch 'for-4.10/mailbox' into for-4.10/firmware
      firmware: tegra: Add IVC library
      firmware: tegra: Add BPMP support
      Merge branch 'for-4.10/firmware' into for-4.10/reset
      reset: Add Tegra BPMP reset driver

 .../bindings/firmware/nvidia,tegra186-bpmp.txt     |  108 ++
 .../bindings/mailbox/nvidia,tegra186-hsp.txt       |   52 +
 drivers/firmware/Kconfig                           |    1 +
 drivers/firmware/Makefile                          |    1 +
 drivers/firmware/tegra/Kconfig                     |   25 +
 drivers/firmware/tegra/Makefile                    |    2 +
 drivers/firmware/tegra/bpmp.c                      |  868 +++++++++++
 drivers/firmware/tegra/ivc.c                       |  695 +++++++++
 drivers/mailbox/Kconfig                            |    9 +
 drivers/mailbox/Makefile                           |    2 +
 drivers/mailbox/tegra-hsp.c                        |  479 ++++++
 drivers/reset/Kconfig                              |    1 +
 drivers/reset/Makefile                             |    1 +
 drivers/reset/tegra/Kconfig                        |    2 +
 drivers/reset/tegra/Makefile                       |    1 +
 drivers/reset/tegra/reset-bpmp.c                   |   71 +
 drivers/soc/tegra/Kconfig                          |   14 +
 include/dt-bindings/clock/tegra186-clock.h         |  940 ++++++++++++
 include/dt-bindings/mailbox/tegra186-hsp.h         |   24 +
 include/dt-bindings/power/tegra186-powergate.h     |   39 +
 include/dt-bindings/reset/tegra186-reset.h         |  217 +++
 include/soc/tegra/bpmp-abi.h                       | 1601 ++++++++++++++++++++
 include/soc/tegra/bpmp.h                           |  141 ++
 include/soc/tegra/ivc.h                            |  109 ++
 24 files changed, 5403 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
 create mode 100644 Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
 create mode 100644 drivers/firmware/tegra/Kconfig
 create mode 100644 drivers/firmware/tegra/Makefile
 create mode 100644 drivers/firmware/tegra/bpmp.c
 create mode 100644 drivers/firmware/tegra/ivc.c
 create mode 100644 drivers/mailbox/tegra-hsp.c
 create mode 100644 drivers/reset/tegra/Kconfig
 create mode 100644 drivers/reset/tegra/Makefile
 create mode 100644 drivers/reset/tegra/reset-bpmp.c
 create mode 100644 include/dt-bindings/clock/tegra186-clock.h
 create mode 100644 include/dt-bindings/mailbox/tegra186-hsp.h
 create mode 100644 include/dt-bindings/power/tegra186-powergate.h
 create mode 100644 include/dt-bindings/reset/tegra186-reset.h
 create mode 100644 include/soc/tegra/bpmp-abi.h
 create mode 100644 include/soc/tegra/bpmp.h
 create mode 100644 include/soc/tegra/ivc.h

[GIT PULL 4/10] bus: Add Tegra GMI support

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-bus

for you to fetch changes up to 40eb47767852a9122ef99a48f8d208ec6327e07f:

  bus: Add support for Tegra Generic Memory Interface (2016-11-15 17:27:53 +0100)

Thanks,
Thierry

----------------------------------------------------------------
bus: Add Tegra GMI support

This provides a driver to enable the use of the Generic Memory Interface
found on Tegra SoCs that can host various types of high-speed devices.

----------------------------------------------------------------
Mirza Krak (2):
      dt/bindings: Add bindings for Tegra GMI controller
      bus: Add support for Tegra Generic Memory Interface

 .../devicetree/bindings/bus/nvidia,tegra20-gmi.txt | 132 ++++++++++
 drivers/bus/Kconfig                                |   7 +
 drivers/bus/Makefile                               |   1 +
 drivers/bus/tegra-gmi.c                            | 284 +++++++++++++++++++++
 4 files changed, 424 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt
 create mode 100644 drivers/bus/tegra-gmi.c

[GIT PULL 4/10] bus: Add Tegra GMI support

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-bus

for you to fetch changes up to 40eb47767852a9122ef99a48f8d208ec6327e07f:

  bus: Add support for Tegra Generic Memory Interface (2016-11-15 17:27:53 +0100)

Thanks,
Thierry

----------------------------------------------------------------
bus: Add Tegra GMI support

This provides a driver to enable the use of the Generic Memory Interface
found on Tegra SoCs that can host various types of high-speed devices.

----------------------------------------------------------------
Mirza Krak (2):
      dt/bindings: Add bindings for Tegra GMI controller
      bus: Add support for Tegra Generic Memory Interface

 .../devicetree/bindings/bus/nvidia,tegra20-gmi.txt | 132 ++++++++++
 drivers/bus/Kconfig                                |   7 +
 drivers/bus/Makefile                               |   1 +
 drivers/bus/tegra-gmi.c                            | 284 +++++++++++++++++++++
 4 files changed, 424 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt
 create mode 100644 drivers/bus/tegra-gmi.c

[GIT PULL 5/10] soc: tegra: Core SoC changes for v4.10-rc1

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-soc

for you to fetch changes up to 4522112069a976908e32e5dd3231c9272d19794a:

  soc/tegra: pmc: Use consistent naming for PM domains (2016-11-15 15:51:56 +0100)

Thanks,
Thierry

----------------------------------------------------------------
soc: tegra: Core SoC changes for v4.10-rc1

This contains mostly cleanup and new feature work on the power
management controller as well as the addition of a Kconfig symbol for
the new Tegra186 (Parker) SoC generation.

----------------------------------------------------------------
Jon Hunter (4):
      soc/tegra: pmc: Guard against uninitialised PMC clock
      soc/tegra: pmc: Simplify IO rail bit handling
      soc/tegra: pmc: Check return code for pm_genpd_init()
      soc/tegra: pmc: Remove genpd when adding provider fails

Joseph Lo (1):
      soc/tegra: Add Tegra186 support

Laxman Dewangan (3):
      soc/tegra: pmc: Use BIT macro for register field definition
      soc/tegra: pmc: Correct type of variable for tegra_pmc_readl()
      soc/tegra: pmc: Add I/O pad voltage support

Thierry Reding (3):
      soc/tegra: pmc: Use consistent ordering of bit definitions
      soc/tegra: pmc: Clean-up I/O rail error messages
      soc/tegra: pmc: Use consistent naming for PM domains

 drivers/soc/tegra/Kconfig |  14 ++
 drivers/soc/tegra/pmc.c   | 398 +++++++++++++++++++++++++++++++++++-----------
 include/soc/tegra/pmc.h   | 126 +++++++++++----
 3 files changed, 414 insertions(+), 124 deletions(-)

[GIT PULL 5/10] soc: tegra: Core SoC changes for v4.10-rc1

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-soc

for you to fetch changes up to 4522112069a976908e32e5dd3231c9272d19794a:

  soc/tegra: pmc: Use consistent naming for PM domains (2016-11-15 15:51:56 +0100)

Thanks,
Thierry

----------------------------------------------------------------
soc: tegra: Core SoC changes for v4.10-rc1

This contains mostly cleanup and new feature work on the power
management controller as well as the addition of a Kconfig symbol for
the new Tegra186 (Parker) SoC generation.

----------------------------------------------------------------
Jon Hunter (4):
      soc/tegra: pmc: Guard against uninitialised PMC clock
      soc/tegra: pmc: Simplify IO rail bit handling
      soc/tegra: pmc: Check return code for pm_genpd_init()
      soc/tegra: pmc: Remove genpd when adding provider fails

Joseph Lo (1):
      soc/tegra: Add Tegra186 support

Laxman Dewangan (3):
      soc/tegra: pmc: Use BIT macro for register field definition
      soc/tegra: pmc: Correct type of variable for tegra_pmc_readl()
      soc/tegra: pmc: Add I/O pad voltage support

Thierry Reding (3):
      soc/tegra: pmc: Use consistent ordering of bit definitions
      soc/tegra: pmc: Clean-up I/O rail error messages
      soc/tegra: pmc: Use consistent naming for PM domains

 drivers/soc/tegra/Kconfig |  14 ++
 drivers/soc/tegra/pmc.c   | 398 +++++++++++++++++++++++++++++++++++-----------
 include/soc/tegra/pmc.h   | 126 +++++++++++----
 3 files changed, 414 insertions(+), 124 deletions(-)

[GIT PULL 6/10] dt-bindings: Cleanups and additions for v4.10-rc1

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-dt-bindings

for you to fetch changes up to 2e002bdedcdcbd6a708f5698a09eb32df568efb8:

  dt-bindings: Add documentation for Tegra186 Denver (2016-11-17 18:09:05 +0100)

Thanks,
Thierry

----------------------------------------------------------------
dt-bindings: Cleanups and additions for v4.10-rc1

Contains two small patches, one fixing a typo and the other adding the
compatible string for the Denver CPUs found on the new Tegra186 SoCs.

----------------------------------------------------------------
Mirza Krak (1):
      serial: tegra20-hsuart: Fix typo in dmas DT binding description

Thierry Reding (1):
      dt-bindings: Add documentation for Tegra186 Denver

 Documentation/devicetree/bindings/arm/cpus.txt                     | 1 +
 Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

[GIT PULL 6/10] dt-bindings: Cleanups and additions for v4.10-rc1

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-dt-bindings

for you to fetch changes up to 2e002bdedcdcbd6a708f5698a09eb32df568efb8:

  dt-bindings: Add documentation for Tegra186 Denver (2016-11-17 18:09:05 +0100)

Thanks,
Thierry

----------------------------------------------------------------
dt-bindings: Cleanups and additions for v4.10-rc1

Contains two small patches, one fixing a typo and the other adding the
compatible string for the Denver CPUs found on the new Tegra186 SoCs.

----------------------------------------------------------------
Mirza Krak (1):
      serial: tegra20-hsuart: Fix typo in dmas DT binding description

Thierry Reding (1):
      dt-bindings: Add documentation for Tegra186 Denver

 Documentation/devicetree/bindings/arm/cpus.txt                     | 1 +
 Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

[GIT PULL 7/10] ARM: tegra: Device tree changes for v4.10-rc1

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm-dt

for you to fetch changes up to 5e8a724d143308f3195375951b0c8f01b2ca59fe:

  ARM: tegra: apalis-tk1: Drop leading 0 from unit-address (2016-11-08 11:14:02 +0100)

Thanks,
Thierry

----------------------------------------------------------------
ARM: tegra: Device tree changes for v4.10-rc1

Adds support for GMI on Tegra20 and Tegra30 and enables the GPU on Nyan
Chromebooks. It also enables sound support on various Toradex devices.

----------------------------------------------------------------
Marcel Ziswiler (1):
      ARM: tegra: apalis/colibri t30: Integrate audio

Mirza Krak (2):
      ARM: tegra: Add Tegra20 GMI support
      ARM: tegra: Add Tegra30 GMI support

Paul Kocialkowski (1):
      ARM: tegra: nyan: Enable GPU node and related supply

Thierry Reding (1):
      ARM: tegra: apalis-tk1: Drop leading 0 from unit-address

 arch/arm/boot/dts/tegra124-apalis.dtsi |  2 +-
 arch/arm/boot/dts/tegra124-nyan.dtsi   |  8 +++++-
 arch/arm/boot/dts/tegra20.dtsi         | 13 +++++++++
 arch/arm/boot/dts/tegra30-apalis.dtsi  | 49 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/tegra30-colibri.dtsi | 49 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/tegra30.dtsi         | 13 +++++++++
 6 files changed, 132 insertions(+), 2 deletions(-)

[GIT PULL 7/10] ARM: tegra: Device tree changes for v4.10-rc1

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm-dt

for you to fetch changes up to 5e8a724d143308f3195375951b0c8f01b2ca59fe:

  ARM: tegra: apalis-tk1: Drop leading 0 from unit-address (2016-11-08 11:14:02 +0100)

Thanks,
Thierry

----------------------------------------------------------------
ARM: tegra: Device tree changes for v4.10-rc1

Adds support for GMI on Tegra20 and Tegra30 and enables the GPU on Nyan
Chromebooks. It also enables sound support on various Toradex devices.

----------------------------------------------------------------
Marcel Ziswiler (1):
      ARM: tegra: apalis/colibri t30: Integrate audio

Mirza Krak (2):
      ARM: tegra: Add Tegra20 GMI support
      ARM: tegra: Add Tegra30 GMI support

Paul Kocialkowski (1):
      ARM: tegra: nyan: Enable GPU node and related supply

Thierry Reding (1):
      ARM: tegra: apalis-tk1: Drop leading 0 from unit-address

 arch/arm/boot/dts/tegra124-apalis.dtsi |  2 +-
 arch/arm/boot/dts/tegra124-nyan.dtsi   |  8 +++++-
 arch/arm/boot/dts/tegra20.dtsi         | 13 +++++++++
 arch/arm/boot/dts/tegra30-apalis.dtsi  | 49 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/tegra30-colibri.dtsi | 49 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/tegra30.dtsi         | 13 +++++++++
 6 files changed, 132 insertions(+), 2 deletions(-)

[GIT PULL 8/10] ARM: tegra: Default configuration updates for v4.10-rc1

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm-defconfig

for you to fetch changes up to dafba3f6fb8614a114f939e5626447d71db864af:

  ARM: tegra: Enable GMI driver in default configuration (2016-11-08 11:49:41 +0100)

Thanks,
Thierry

----------------------------------------------------------------
ARM: tegra: Default configuration updates for v4.10-rc1

Enable audio support for various Toradex devices as well as the GMI.

----------------------------------------------------------------
Marcel Ziswiler (1):
      ARM: tegra: Enable SGTL5000 audio

Thierry Reding (2):
      ARM: tegra: Update default configuration for v4.9-rc1
      ARM: tegra: Enable GMI driver in default configuration

 arch/arm/configs/tegra_defconfig | 27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)

[GIT PULL 8/10] ARM: tegra: Default configuration updates for v4.10-rc1

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm-defconfig

for you to fetch changes up to dafba3f6fb8614a114f939e5626447d71db864af:

  ARM: tegra: Enable GMI driver in default configuration (2016-11-08 11:49:41 +0100)

Thanks,
Thierry

----------------------------------------------------------------
ARM: tegra: Default configuration updates for v4.10-rc1

Enable audio support for various Toradex devices as well as the GMI.

----------------------------------------------------------------
Marcel Ziswiler (1):
      ARM: tegra: Enable SGTL5000 audio

Thierry Reding (2):
      ARM: tegra: Update default configuration for v4.9-rc1
      ARM: tegra: Enable GMI driver in default configuration

 arch/arm/configs/tegra_defconfig | 27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)

[GIT PULL 9/10] arm64: tegra: Device tree changes for v4.10-rc1

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm64-dt

for you to fetch changes up to cc13b4fa4ac780cec6c21b64a39ab2950e95e8f6:

  arm64: tegra: Add NVIDIA P2771 board support (2016-11-18 14:35:53 +0100)

Thanks,
Thierry

----------------------------------------------------------------
arm64: tegra: Device tree changes for v4.10-rc1

This adds initial support for Tegra186, the P3310 processor module as
well as the P2771 development board. Not much is functional, but there
is enough to boot to an initial ramdisk with debug serial output.

----------------------------------------------------------------
Dan Carpenter (1):
      mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()

Joseph Lo (6):
      soc/tegra: Add Tegra186 support
      dt-bindings: mailbox: Add Tegra HSP binding
      dt-bindings: firmware: Add bindings for Tegra BPMP
      arm64: tegra: Add Tegra186 support
      arm64: tegra: Add NVIDIA P3310 processor module support
      arm64: tegra: Add NVIDIA P2771 board support

Stephen Warren (2):
      dt-bindings: Add power domains to Tegra BPMP firmware
      dt-bindings: firmware: Allow child nodes inside the Tegra BPMP

Thierry Reding (12):
      Merge branch 'for-4.10/soc' into for-4.10/mailbox
      mailbox: Add Tegra HSP driver
      Merge branch 'for-4.10/mailbox' into for-4.10/firmware
      firmware: tegra: Add IVC library
      firmware: tegra: Add BPMP support
      Merge branch 'for-4.10/firmware' into for-4.10/arm64/dt
      arm64: tegra: Add CPU nodes for Tegra186
      arm64: tegra: Add serial ports on Tegra186
      arm64: tegra: Add I2C controllers on Tegra186
      arm64: tegra: Add SDHCI controllers on Tegra186
      arm64: tegra: Add GPIO controllers on Tegra186
      arm64: tegra: Enable PSCI on P3310

 .../bindings/firmware/nvidia,tegra186-bpmp.txt     |  108 ++
 .../bindings/mailbox/nvidia,tegra186-hsp.txt       |   52 +
 arch/arm64/boot/dts/nvidia/Makefile                |    1 +
 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts |    8 +
 arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi     |   64 +
 arch/arm64/boot/dts/nvidia/tegra186.dtsi           |  402 +++++
 drivers/firmware/Kconfig                           |    1 +
 drivers/firmware/Makefile                          |    1 +
 drivers/firmware/tegra/Kconfig                     |   25 +
 drivers/firmware/tegra/Makefile                    |    2 +
 drivers/firmware/tegra/bpmp.c                      |  868 +++++++++++
 drivers/firmware/tegra/ivc.c                       |  695 +++++++++
 drivers/mailbox/Kconfig                            |    9 +
 drivers/mailbox/Makefile                           |    2 +
 drivers/mailbox/tegra-hsp.c                        |  479 ++++++
 drivers/soc/tegra/Kconfig                          |   14 +
 include/dt-bindings/clock/tegra186-clock.h         |  940 ++++++++++++
 include/dt-bindings/mailbox/tegra186-hsp.h         |   24 +
 include/dt-bindings/power/tegra186-powergate.h     |   39 +
 include/dt-bindings/reset/tegra186-reset.h         |  217 +++
 include/soc/tegra/bpmp-abi.h                       | 1601 ++++++++++++++++++++
 include/soc/tegra/bpmp.h                           |  141 ++
 include/soc/tegra/ivc.h                            |  109 ++
 23 files changed, 5802 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
 create mode 100644 Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra186.dtsi
 create mode 100644 drivers/firmware/tegra/Kconfig
 create mode 100644 drivers/firmware/tegra/Makefile
 create mode 100644 drivers/firmware/tegra/bpmp.c
 create mode 100644 drivers/firmware/tegra/ivc.c
 create mode 100644 drivers/mailbox/tegra-hsp.c
 create mode 100644 include/dt-bindings/clock/tegra186-clock.h
 create mode 100644 include/dt-bindings/mailbox/tegra186-hsp.h
 create mode 100644 include/dt-bindings/power/tegra186-powergate.h
 create mode 100644 include/dt-bindings/reset/tegra186-reset.h
 create mode 100644 include/soc/tegra/bpmp-abi.h
 create mode 100644 include/soc/tegra/bpmp.h
 create mode 100644 include/soc/tegra/ivc.h

[GIT PULL 9/10] arm64: tegra: Device tree changes for v4.10-rc1

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm64-dt

for you to fetch changes up to cc13b4fa4ac780cec6c21b64a39ab2950e95e8f6:

  arm64: tegra: Add NVIDIA P2771 board support (2016-11-18 14:35:53 +0100)

Thanks,
Thierry

----------------------------------------------------------------
arm64: tegra: Device tree changes for v4.10-rc1

This adds initial support for Tegra186, the P3310 processor module as
well as the P2771 development board. Not much is functional, but there
is enough to boot to an initial ramdisk with debug serial output.

----------------------------------------------------------------
Dan Carpenter (1):
      mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()

Joseph Lo (6):
      soc/tegra: Add Tegra186 support
      dt-bindings: mailbox: Add Tegra HSP binding
      dt-bindings: firmware: Add bindings for Tegra BPMP
      arm64: tegra: Add Tegra186 support
      arm64: tegra: Add NVIDIA P3310 processor module support
      arm64: tegra: Add NVIDIA P2771 board support

Stephen Warren (2):
      dt-bindings: Add power domains to Tegra BPMP firmware
      dt-bindings: firmware: Allow child nodes inside the Tegra BPMP

Thierry Reding (12):
      Merge branch 'for-4.10/soc' into for-4.10/mailbox
      mailbox: Add Tegra HSP driver
      Merge branch 'for-4.10/mailbox' into for-4.10/firmware
      firmware: tegra: Add IVC library
      firmware: tegra: Add BPMP support
      Merge branch 'for-4.10/firmware' into for-4.10/arm64/dt
      arm64: tegra: Add CPU nodes for Tegra186
      arm64: tegra: Add serial ports on Tegra186
      arm64: tegra: Add I2C controllers on Tegra186
      arm64: tegra: Add SDHCI controllers on Tegra186
      arm64: tegra: Add GPIO controllers on Tegra186
      arm64: tegra: Enable PSCI on P3310

 .../bindings/firmware/nvidia,tegra186-bpmp.txt     |  108 ++
 .../bindings/mailbox/nvidia,tegra186-hsp.txt       |   52 +
 arch/arm64/boot/dts/nvidia/Makefile                |    1 +
 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts |    8 +
 arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi     |   64 +
 arch/arm64/boot/dts/nvidia/tegra186.dtsi           |  402 +++++
 drivers/firmware/Kconfig                           |    1 +
 drivers/firmware/Makefile                          |    1 +
 drivers/firmware/tegra/Kconfig                     |   25 +
 drivers/firmware/tegra/Makefile                    |    2 +
 drivers/firmware/tegra/bpmp.c                      |  868 +++++++++++
 drivers/firmware/tegra/ivc.c                       |  695 +++++++++
 drivers/mailbox/Kconfig                            |    9 +
 drivers/mailbox/Makefile                           |    2 +
 drivers/mailbox/tegra-hsp.c                        |  479 ++++++
 drivers/soc/tegra/Kconfig                          |   14 +
 include/dt-bindings/clock/tegra186-clock.h         |  940 ++++++++++++
 include/dt-bindings/mailbox/tegra186-hsp.h         |   24 +
 include/dt-bindings/power/tegra186-powergate.h     |   39 +
 include/dt-bindings/reset/tegra186-reset.h         |  217 +++
 include/soc/tegra/bpmp-abi.h                       | 1601 ++++++++++++++++++++
 include/soc/tegra/bpmp.h                           |  141 ++
 include/soc/tegra/ivc.h                            |  109 ++
 23 files changed, 5802 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
 create mode 100644 Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra186.dtsi
 create mode 100644 drivers/firmware/tegra/Kconfig
 create mode 100644 drivers/firmware/tegra/Makefile
 create mode 100644 drivers/firmware/tegra/bpmp.c
 create mode 100644 drivers/firmware/tegra/ivc.c
 create mode 100644 drivers/mailbox/tegra-hsp.c
 create mode 100644 include/dt-bindings/clock/tegra186-clock.h
 create mode 100644 include/dt-bindings/mailbox/tegra186-hsp.h
 create mode 100644 include/dt-bindings/power/tegra186-powergate.h
 create mode 100644 include/dt-bindings/reset/tegra186-reset.h
 create mode 100644 include/soc/tegra/bpmp-abi.h
 create mode 100644 include/soc/tegra/bpmp.h
 create mode 100644 include/soc/tegra/ivc.h

[GIT PULL 10/10] arm64: tegra: Default configuration updates for v4.10-rc1

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm64-defconfig

for you to fetch changes up to c6299451bb45bf3370cc3aa53891fb9d48bed774:

  arm64: defconfig: Enable Tegra186 SoC (2016-11-15 16:26:03 +0100)

Thanks,
Thierry

----------------------------------------------------------------
arm64: tegra: Default configuration updates for v4.10-rc1

Enable Tegra186 support.

----------------------------------------------------------------
Joseph Lo (1):
      arm64: defconfig: Enable Tegra186 SoC

 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

[GIT PULL 10/10] arm64: tegra: Default configuration updates for v4.10-rc1

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm64-defconfig

for you to fetch changes up to c6299451bb45bf3370cc3aa53891fb9d48bed774:

  arm64: defconfig: Enable Tegra186 SoC (2016-11-15 16:26:03 +0100)

Thanks,
Thierry

----------------------------------------------------------------
arm64: tegra: Default configuration updates for v4.10-rc1

Enable Tegra186 support.

----------------------------------------------------------------
Joseph Lo (1):
      arm64: defconfig: Enable Tegra186 SoC

 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

Re: [GIT PULL 1/10] mailbox: Add Tegra HSP driver

[Olof Johansson]

Hi,

On Fri, Nov 18, 2016 at 05:17:10PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-mailbox
> 
> for you to fetch changes up to 68050eb6c611527232fe5574c7306e97e47499ef:
> 
>   mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells() (2016-11-18 14:32:13 +0100)
> 
> Thanks,
> Thierry
> 
> ----------------------------------------------------------------
> mailbox: Add Tegra HSP driver
> 
> This contains the device tree bindings and a driver for the Tegra HSP, a
> hardware block that provides hardware synchronization primitives and is
> the foundation for inter-processor communication between CPU and BPMP.
> 
> ----------------------------------------------------------------
> Dan Carpenter (1):
>       mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
> 
> Joseph Lo (2):
>       soc/tegra: Add Tegra186 support

I don't think you really needed to merge this in here, since all you need it
for is to fulfill the kconfig dependency and enable the driver, right? That'd
happen when the driver and soc branch is merged at the toplevel anyway.


Anyhow, no damage done, I've merged this in. I would say that it'd be a little
more logical to send the SoC branch before the driver branch given this
dependency though.


-Olof

[GIT PULL 1/10] mailbox: Add Tegra HSP driver

[Olof Johansson]

Hi,

On Fri, Nov 18, 2016 at 05:17:10PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-mailbox
> 
> for you to fetch changes up to 68050eb6c611527232fe5574c7306e97e47499ef:
> 
>   mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells() (2016-11-18 14:32:13 +0100)
> 
> Thanks,
> Thierry
> 
> ----------------------------------------------------------------
> mailbox: Add Tegra HSP driver
> 
> This contains the device tree bindings and a driver for the Tegra HSP, a
> hardware block that provides hardware synchronization primitives and is
> the foundation for inter-processor communication between CPU and BPMP.
> 
> ----------------------------------------------------------------
> Dan Carpenter (1):
>       mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
> 
> Joseph Lo (2):
>       soc/tegra: Add Tegra186 support

I don't think you really needed to merge this in here, since all you need it
for is to fulfill the kconfig dependency and enable the driver, right? That'd
happen when the driver and soc branch is merged at the toplevel anyway.


Anyhow, no damage done, I've merged this in. I would say that it'd be a little
more logical to send the SoC branch before the driver branch given this
dependency though.


-Olof

Re: [GIT PULL 2/10] firmware: Add Tegra IVC and BPMP support

[Olof Johansson]

On Fri, Nov 18, 2016 at 05:17:11PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-firmware
> 
> for you to fetch changes up to b704ed8095ee91af5f3f7343bb3be23aae1cb26d:
> 
>   dt-bindings: firmware: Allow child nodes inside the Tegra BPMP (2016-11-18 14:33:44 +0100)
> 
> Thanks,
> Thierry
> 
> ----------------------------------------------------------------
> firmware: Add Tegra IVC and BPMP support
> 
> IVC is an inter-processor communication protocol that uses shared memory
> to exchange data between processors. The BPMP driver makes use of this
> to communicate with the Boot and Power Management Processor (BPMP) and
> uses an additional hardware synchronization primitive from the HSP block
> to signal availability of new data (doorbell).
> 
> Firmware running on the BPMP implements a number of services such as the
> control of clocks and resets within the system, or the ability to ungate
> or gate power partitions.
> 
> ----------------------------------------------------------------
> Dan Carpenter (1):
>       mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
> 
> Joseph Lo (3):
>       soc/tegra: Add Tegra186 support
>       dt-bindings: mailbox: Add Tegra HSP binding
>       dt-bindings: firmware: Add bindings for Tegra BPMP
> 
> Stephen Warren (2):
>       dt-bindings: Add power domains to Tegra BPMP firmware
>       dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
> 
> Thierry Reding (5):
>       Merge branch 'for-4.10/soc' into for-4.10/mailbox
>       mailbox: Add Tegra HSP driver
>       Merge branch 'for-4.10/mailbox' into for-4.10/firmware
>       firmware: tegra: Add IVC library
>       firmware: tegra: Add BPMP support

Hi,

Again the format of the pull request here is a little confusing, since it's
a cumulative shotlog and diffstat, while you already sent the bulk of this
as part of the driver branch (1/10). It'd have been better to use that branch
as the base when you generate the pull request since that's the delta we see
when we merge it in.

Also, I can't seem to find the key you use to sign these tags with, it isn't
uploaded on pgp.mit.edu. Can you remedy that please, and get it signed as
needed?

All that being said, I've merged this into next/drivers. Thanks!


-Olof

[GIT PULL 2/10] firmware: Add Tegra IVC and BPMP support

[Olof Johansson]

On Fri, Nov 18, 2016 at 05:17:11PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-firmware
> 
> for you to fetch changes up to b704ed8095ee91af5f3f7343bb3be23aae1cb26d:
> 
>   dt-bindings: firmware: Allow child nodes inside the Tegra BPMP (2016-11-18 14:33:44 +0100)
> 
> Thanks,
> Thierry
> 
> ----------------------------------------------------------------
> firmware: Add Tegra IVC and BPMP support
> 
> IVC is an inter-processor communication protocol that uses shared memory
> to exchange data between processors. The BPMP driver makes use of this
> to communicate with the Boot and Power Management Processor (BPMP) and
> uses an additional hardware synchronization primitive from the HSP block
> to signal availability of new data (doorbell).
> 
> Firmware running on the BPMP implements a number of services such as the
> control of clocks and resets within the system, or the ability to ungate
> or gate power partitions.
> 
> ----------------------------------------------------------------
> Dan Carpenter (1):
>       mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
> 
> Joseph Lo (3):
>       soc/tegra: Add Tegra186 support
>       dt-bindings: mailbox: Add Tegra HSP binding
>       dt-bindings: firmware: Add bindings for Tegra BPMP
> 
> Stephen Warren (2):
>       dt-bindings: Add power domains to Tegra BPMP firmware
>       dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
> 
> Thierry Reding (5):
>       Merge branch 'for-4.10/soc' into for-4.10/mailbox
>       mailbox: Add Tegra HSP driver
>       Merge branch 'for-4.10/mailbox' into for-4.10/firmware
>       firmware: tegra: Add IVC library
>       firmware: tegra: Add BPMP support

Hi,

Again the format of the pull request here is a little confusing, since it's
a cumulative shotlog and diffstat, while you already sent the bulk of this
as part of the driver branch (1/10). It'd have been better to use that branch
as the base when you generate the pull request since that's the delta we see
when we merge it in.

Also, I can't seem to find the key you use to sign these tags with, it isn't
uploaded on pgp.mit.edu. Can you remedy that please, and get it signed as
needed?

All that being said, I've merged this into next/drivers. Thanks!


-Olof

Re: [GIT PULL 3/10] reset: Add Tegra BPMP reset driver

[Olof Johansson]

On Fri, Nov 18, 2016 at 05:17:12PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-reset
> 
> for you to fetch changes up to dc606c5205536a828c17bd96f06559dafaf75fb7:
> 
>   reset: Add Tegra BPMP reset driver (2016-11-18 14:34:56 +0100)
> 
> Thanks,
> Thierry
> 
> ----------------------------------------------------------------
> reset: Add Tegra BPMP reset driver
> 
> This contains a patch which implements a reset driver using the services
> provided by the BPMP firmware (via the MRQ_RESET request).
> 
> ----------------------------------------------------------------
> Dan Carpenter (1):
>       mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
> 
> Joseph Lo (3):
>       soc/tegra: Add Tegra186 support
>       dt-bindings: mailbox: Add Tegra HSP binding
>       dt-bindings: firmware: Add bindings for Tegra BPMP
> 
> Stephen Warren (2):
>       dt-bindings: Add power domains to Tegra BPMP firmware
>       dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
> 
> Thierry Reding (7):
>       Merge branch 'for-4.10/soc' into for-4.10/mailbox
>       mailbox: Add Tegra HSP driver
>       Merge branch 'for-4.10/mailbox' into for-4.10/firmware
>       firmware: tegra: Add IVC library
>       firmware: tegra: Add BPMP support
>       Merge branch 'for-4.10/firmware' into for-4.10/reset
>       reset: Add Tegra BPMP reset driver

Same comments apply here, since this branch only adds one more driver.

Merged into next/drivers with the other branches so far.


-Olof

[GIT PULL 3/10] reset: Add Tegra BPMP reset driver

[Olof Johansson]

On Fri, Nov 18, 2016 at 05:17:12PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-reset
> 
> for you to fetch changes up to dc606c5205536a828c17bd96f06559dafaf75fb7:
> 
>   reset: Add Tegra BPMP reset driver (2016-11-18 14:34:56 +0100)
> 
> Thanks,
> Thierry
> 
> ----------------------------------------------------------------
> reset: Add Tegra BPMP reset driver
> 
> This contains a patch which implements a reset driver using the services
> provided by the BPMP firmware (via the MRQ_RESET request).
> 
> ----------------------------------------------------------------
> Dan Carpenter (1):
>       mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
> 
> Joseph Lo (3):
>       soc/tegra: Add Tegra186 support
>       dt-bindings: mailbox: Add Tegra HSP binding
>       dt-bindings: firmware: Add bindings for Tegra BPMP
> 
> Stephen Warren (2):
>       dt-bindings: Add power domains to Tegra BPMP firmware
>       dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
> 
> Thierry Reding (7):
>       Merge branch 'for-4.10/soc' into for-4.10/mailbox
>       mailbox: Add Tegra HSP driver
>       Merge branch 'for-4.10/mailbox' into for-4.10/firmware
>       firmware: tegra: Add IVC library
>       firmware: tegra: Add BPMP support
>       Merge branch 'for-4.10/firmware' into for-4.10/reset
>       reset: Add Tegra BPMP reset driver

Same comments apply here, since this branch only adds one more driver.

Merged into next/drivers with the other branches so far.


-Olof

Re: [GIT PULL 4/10] bus: Add Tegra GMI support

[Olof Johansson]

On Fri, Nov 18, 2016 at 05:17:13PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-bus
> 
> for you to fetch changes up to 40eb47767852a9122ef99a48f8d208ec6327e07f:
> 
>   bus: Add support for Tegra Generic Memory Interface (2016-11-15 17:27:53 +0100)
> 
> Thanks,
> Thierry
> 
> ----------------------------------------------------------------
> bus: Add Tegra GMI support
> 
> This provides a driver to enable the use of the Generic Memory Interface
> found on Tegra SoCs that can host various types of high-speed devices.

Merged, thanks.


-Olof

[GIT PULL 4/10] bus: Add Tegra GMI support

[Olof Johansson]

On Fri, Nov 18, 2016 at 05:17:13PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-bus
> 
> for you to fetch changes up to 40eb47767852a9122ef99a48f8d208ec6327e07f:
> 
>   bus: Add support for Tegra Generic Memory Interface (2016-11-15 17:27:53 +0100)
> 
> Thanks,
> Thierry
> 
> ----------------------------------------------------------------
> bus: Add Tegra GMI support
> 
> This provides a driver to enable the use of the Generic Memory Interface
> found on Tegra SoCs that can host various types of high-speed devices.

Merged, thanks.


-Olof

Re: [GIT PULL 4/10] bus: Add Tegra GMI support

[Olof Johansson]

On Fri, Nov 18, 2016 at 05:17:13PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-bus
> 
> for you to fetch changes up to 40eb47767852a9122ef99a48f8d208ec6327e07f:
> 
>   bus: Add support for Tegra Generic Memory Interface (2016-11-15 17:27:53 +0100)
> 
> Thanks,
> Thierry
> 
> ----------------------------------------------------------------
> bus: Add Tegra GMI support
> 
> This provides a driver to enable the use of the Generic Memory Interface
> found on Tegra SoCs that can host various types of high-speed devices.

Merged, thanks!


-Olof

[GIT PULL 4/10] bus: Add Tegra GMI support

[Olof Johansson]

On Fri, Nov 18, 2016 at 05:17:13PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-bus
> 
> for you to fetch changes up to 40eb47767852a9122ef99a48f8d208ec6327e07f:
> 
>   bus: Add support for Tegra Generic Memory Interface (2016-11-15 17:27:53 +0100)
> 
> Thanks,
> Thierry
> 
> ----------------------------------------------------------------
> bus: Add Tegra GMI support
> 
> This provides a driver to enable the use of the Generic Memory Interface
> found on Tegra SoCs that can host various types of high-speed devices.

Merged, thanks!


-Olof

Re: [GIT PULL 5/10] soc: tegra: Core SoC changes for v4.10-rc1

[Olof Johansson]

On Fri, Nov 18, 2016 at 05:17:14PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-soc
> 
> for you to fetch changes up to 4522112069a976908e32e5dd3231c9272d19794a:
> 
>   soc/tegra: pmc: Use consistent naming for PM domains (2016-11-15 15:51:56 +0100)
> 
> Thanks,
> Thierry
> 
> ----------------------------------------------------------------
> soc: tegra: Core SoC changes for v4.10-rc1
> 
> This contains mostly cleanup and new feature work on the power
> management controller as well as the addition of a Kconfig symbol for
> the new Tegra186 (Parker) SoC generation.
> 

Merged, thanks.


-Olof

[GIT PULL 5/10] soc: tegra: Core SoC changes for v4.10-rc1

[Olof Johansson]

On Fri, Nov 18, 2016 at 05:17:14PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-soc
> 
> for you to fetch changes up to 4522112069a976908e32e5dd3231c9272d19794a:
> 
>   soc/tegra: pmc: Use consistent naming for PM domains (2016-11-15 15:51:56 +0100)
> 
> Thanks,
> Thierry
> 
> ----------------------------------------------------------------
> soc: tegra: Core SoC changes for v4.10-rc1
> 
> This contains mostly cleanup and new feature work on the power
> management controller as well as the addition of a Kconfig symbol for
> the new Tegra186 (Parker) SoC generation.
> 

Merged, thanks.


-Olof

Re: [GIT PULL 6/10] dt-bindings: Cleanups and additions for v4.10-rc1

[Olof Johansson]

On Fri, Nov 18, 2016 at 05:17:15PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-dt-bindings
> 
> for you to fetch changes up to 2e002bdedcdcbd6a708f5698a09eb32df568efb8:
> 
>   dt-bindings: Add documentation for Tegra186 Denver (2016-11-17 18:09:05 +0100)
> 
> Thanks,
> Thierry
> 
> ----------------------------------------------------------------
> dt-bindings: Cleanups and additions for v4.10-rc1
> 
> Contains two small patches, one fixing a typo and the other adding the
> compatible string for the Denver CPUs found on the new Tegra186 SoCs.

Merged, thanks.


-Olof

[GIT PULL 6/10] dt-bindings: Cleanups and additions for v4.10-rc1

[Olof Johansson]

On Fri, Nov 18, 2016 at 05:17:15PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-dt-bindings
> 
> for you to fetch changes up to 2e002bdedcdcbd6a708f5698a09eb32df568efb8:
> 
>   dt-bindings: Add documentation for Tegra186 Denver (2016-11-17 18:09:05 +0100)
> 
> Thanks,
> Thierry
> 
> ----------------------------------------------------------------
> dt-bindings: Cleanups and additions for v4.10-rc1
> 
> Contains two small patches, one fixing a typo and the other adding the
> compatible string for the Denver CPUs found on the new Tegra186 SoCs.

Merged, thanks.


-Olof

Re: [GIT PULL 7/10] ARM: tegra: Device tree changes for v4.10-rc1

[Olof Johansson]

On Fri, Nov 18, 2016 at 05:17:16PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm-dt
> 
> for you to fetch changes up to 5e8a724d143308f3195375951b0c8f01b2ca59fe:
> 
>   ARM: tegra: apalis-tk1: Drop leading 0 from unit-address (2016-11-08 11:14:02 +0100)
> 
> Thanks,
> Thierry
> 
> ----------------------------------------------------------------
> ARM: tegra: Device tree changes for v4.10-rc1
> 
> Adds support for GMI on Tegra20 and Tegra30 and enables the GPU on Nyan
> Chromebooks. It also enables sound support on various Toradex devices.

Merged, thanks!


-Olof

[GIT PULL 7/10] ARM: tegra: Device tree changes for v4.10-rc1

[Olof Johansson]

On Fri, Nov 18, 2016 at 05:17:16PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm-dt
> 
> for you to fetch changes up to 5e8a724d143308f3195375951b0c8f01b2ca59fe:
> 
>   ARM: tegra: apalis-tk1: Drop leading 0 from unit-address (2016-11-08 11:14:02 +0100)
> 
> Thanks,
> Thierry
> 
> ----------------------------------------------------------------
> ARM: tegra: Device tree changes for v4.10-rc1
> 
> Adds support for GMI on Tegra20 and Tegra30 and enables the GPU on Nyan
> Chromebooks. It also enables sound support on various Toradex devices.

Merged, thanks!


-Olof

Re: [GIT PULL 8/10] ARM: tegra: Default configuration updates for v4.10-rc1

[Olof Johansson]

On Fri, Nov 18, 2016 at 05:17:17PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm-defconfig
> 
> for you to fetch changes up to dafba3f6fb8614a114f939e5626447d71db864af:
> 
>   ARM: tegra: Enable GMI driver in default configuration (2016-11-08 11:49:41 +0100)
> 
> Thanks,
> Thierry
> 
> ----------------------------------------------------------------
> ARM: tegra: Default configuration updates for v4.10-rc1
> 
> Enable audio support for various Toradex devices as well as the GMI.
> 
> ----------------------------------------------------------------
> Marcel Ziswiler (1):
>       ARM: tegra: Enable SGTL5000 audio
> 
> Thierry Reding (2):
>       ARM: tegra: Update default configuration for v4.9-rc1
>       ARM: tegra: Enable GMI driver in default configuration
> 
>  arch/arm/configs/tegra_defconfig | 27 +++++++++++++--------------
>  1 file changed, 13 insertions(+), 14 deletions(-)
> --

Merged, thanks.


-Olof

[GIT PULL 8/10] ARM: tegra: Default configuration updates for v4.10-rc1

[Olof Johansson]

On Fri, Nov 18, 2016 at 05:17:17PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm-defconfig
> 
> for you to fetch changes up to dafba3f6fb8614a114f939e5626447d71db864af:
> 
>   ARM: tegra: Enable GMI driver in default configuration (2016-11-08 11:49:41 +0100)
> 
> Thanks,
> Thierry
> 
> ----------------------------------------------------------------
> ARM: tegra: Default configuration updates for v4.10-rc1
> 
> Enable audio support for various Toradex devices as well as the GMI.
> 
> ----------------------------------------------------------------
> Marcel Ziswiler (1):
>       ARM: tegra: Enable SGTL5000 audio
> 
> Thierry Reding (2):
>       ARM: tegra: Update default configuration for v4.9-rc1
>       ARM: tegra: Enable GMI driver in default configuration
> 
>  arch/arm/configs/tegra_defconfig | 27 +++++++++++++--------------
>  1 file changed, 13 insertions(+), 14 deletions(-)
> --

Merged, thanks.


-Olof

Re: [GIT PULL 9/10] arm64: tegra: Device tree changes for v4.10-rc1

[Olof Johansson]

On Fri, Nov 18, 2016 at 05:17:18PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm64-dt
> 
> for you to fetch changes up to cc13b4fa4ac780cec6c21b64a39ab2950e95e8f6:
> 
>   arm64: tegra: Add NVIDIA P2771 board support (2016-11-18 14:35:53 +0100)
> 
> Thanks,
> Thierry
> 
> ----------------------------------------------------------------
> arm64: tegra: Device tree changes for v4.10-rc1
> 
> This adds initial support for Tegra186, the P3310 processor module as
> well as the P2771 development board. Not much is functional, but there
> is enough to boot to an initial ramdisk with debug serial output.
> 
> ----------------------------------------------------------------
> Dan Carpenter (1):
>       mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
> 
> Joseph Lo (6):
>       soc/tegra: Add Tegra186 support
>       dt-bindings: mailbox: Add Tegra HSP binding
>       dt-bindings: firmware: Add bindings for Tegra BPMP
>       arm64: tegra: Add Tegra186 support
>       arm64: tegra: Add NVIDIA P3310 processor module support
>       arm64: tegra: Add NVIDIA P2771 board support
> 
> Stephen Warren (2):
>       dt-bindings: Add power domains to Tegra BPMP firmware
>       dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
> 
> Thierry Reding (12):
>       Merge branch 'for-4.10/soc' into for-4.10/mailbox
>       mailbox: Add Tegra HSP driver
>       Merge branch 'for-4.10/mailbox' into for-4.10/firmware
>       firmware: tegra: Add IVC library
>       firmware: tegra: Add BPMP support
>       Merge branch 'for-4.10/firmware' into for-4.10/arm64/dt
>       arm64: tegra: Add CPU nodes for Tegra186
>       arm64: tegra: Add serial ports on Tegra186
>       arm64: tegra: Add I2C controllers on Tegra186
>       arm64: tegra: Add SDHCI controllers on Tegra186
>       arm64: tegra: Add GPIO controllers on Tegra186
>       arm64: tegra: Enable PSCI on P3310

The drivers->dt dependency here is annoying. Any chance you can respin without
it?

We've been encouraging people to consider using numerical clock/gpio/reset
numbers on initial submission to avoid these dependencies on dt-bindings
includes, and then follow up with a move to the symbolic names between -rc1 and
-rc2. Mind doing the same here?


Thanks!


-Olof

[GIT PULL 9/10] arm64: tegra: Device tree changes for v4.10-rc1

[Olof Johansson]

On Fri, Nov 18, 2016 at 05:17:18PM +0100, Thierry Reding wrote:
> Hi ARM SoC maintainers,
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm64-dt
> 
> for you to fetch changes up to cc13b4fa4ac780cec6c21b64a39ab2950e95e8f6:
> 
>   arm64: tegra: Add NVIDIA P2771 board support (2016-11-18 14:35:53 +0100)
> 
> Thanks,
> Thierry
> 
> ----------------------------------------------------------------
> arm64: tegra: Device tree changes for v4.10-rc1
> 
> This adds initial support for Tegra186, the P3310 processor module as
> well as the P2771 development board. Not much is functional, but there
> is enough to boot to an initial ramdisk with debug serial output.
> 
> ----------------------------------------------------------------
> Dan Carpenter (1):
>       mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
> 
> Joseph Lo (6):
>       soc/tegra: Add Tegra186 support
>       dt-bindings: mailbox: Add Tegra HSP binding
>       dt-bindings: firmware: Add bindings for Tegra BPMP
>       arm64: tegra: Add Tegra186 support
>       arm64: tegra: Add NVIDIA P3310 processor module support
>       arm64: tegra: Add NVIDIA P2771 board support
> 
> Stephen Warren (2):
>       dt-bindings: Add power domains to Tegra BPMP firmware
>       dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
> 
> Thierry Reding (12):
>       Merge branch 'for-4.10/soc' into for-4.10/mailbox
>       mailbox: Add Tegra HSP driver
>       Merge branch 'for-4.10/mailbox' into for-4.10/firmware
>       firmware: tegra: Add IVC library
>       firmware: tegra: Add BPMP support
>       Merge branch 'for-4.10/firmware' into for-4.10/arm64/dt
>       arm64: tegra: Add CPU nodes for Tegra186
>       arm64: tegra: Add serial ports on Tegra186
>       arm64: tegra: Add I2C controllers on Tegra186
>       arm64: tegra: Add SDHCI controllers on Tegra186
>       arm64: tegra: Add GPIO controllers on Tegra186
>       arm64: tegra: Enable PSCI on P3310

The drivers->dt dependency here is annoying. Any chance you can respin without
it?

We've been encouraging people to consider using numerical clock/gpio/reset
numbers on initial submission to avoid these dependencies on dt-bindings
includes, and then follow up with a move to the symbolic names between -rc1 and
-rc2. Mind doing the same here?


Thanks!


-Olof

Re: [GIT PULL 1/10] mailbox: Add Tegra HSP driver

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 2458 bytes --]

On Fri, Nov 18, 2016 at 06:27:42PM -0800, Olof Johansson wrote:
> Hi,
> 
> On Fri, Nov 18, 2016 at 05:17:10PM +0100, Thierry Reding wrote:
> > Hi ARM SoC maintainers,
> > 
> > The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> > 
> >   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> > 
> > are available in the git repository at:
> > 
> >   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-mailbox
> > 
> > for you to fetch changes up to 68050eb6c611527232fe5574c7306e97e47499ef:
> > 
> >   mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells() (2016-11-18 14:32:13 +0100)
> > 
> > Thanks,
> > Thierry
> > 
> > ----------------------------------------------------------------
> > mailbox: Add Tegra HSP driver
> > 
> > This contains the device tree bindings and a driver for the Tegra HSP, a
> > hardware block that provides hardware synchronization primitives and is
> > the foundation for inter-processor communication between CPU and BPMP.
> > 
> > ----------------------------------------------------------------
> > Dan Carpenter (1):
> >       mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
> > 
> > Joseph Lo (2):
> >       soc/tegra: Add Tegra186 support
> 
> I don't think you really needed to merge this in here, since all you need it
> for is to fulfill the kconfig dependency and enable the driver, right? That'd
> happen when the driver and soc branch is merged at the toplevel anyway.

The reason I did this is that I wanted each branch to be buildable as a
way to confirm that the dependencies are correct. In order to do that I
need the Kconfig symbol to enable the driver.

I suppose there are other ways I could've done that, though. Maybe in
the future new SoC Kconfig symbols should just be introduced way ahead
of time, so that they're already in a release or two before actual code
starts to emerge.

> Anyhow, no damage done, I've merged this in. I would say that it'd be a little
> more logical to send the SoC branch before the driver branch given this
> dependency though.

The reason that the SoC branch was sent after is because only the first
commit in that branch was pulled into the mailbox branch.

In retrospect, I think perhaps a better approach would've been to have a
separate branch with only the Kconfig symbol addition and pull that in
where needed.

Thanks,
Thierry

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[GIT PULL 1/10] mailbox: Add Tegra HSP driver

[Thierry Reding]

On Fri, Nov 18, 2016 at 06:27:42PM -0800, Olof Johansson wrote:
> Hi,
> 
> On Fri, Nov 18, 2016 at 05:17:10PM +0100, Thierry Reding wrote:
> > Hi ARM SoC maintainers,
> > 
> > The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> > 
> >   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> > 
> > are available in the git repository at:
> > 
> >   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-mailbox
> > 
> > for you to fetch changes up to 68050eb6c611527232fe5574c7306e97e47499ef:
> > 
> >   mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells() (2016-11-18 14:32:13 +0100)
> > 
> > Thanks,
> > Thierry
> > 
> > ----------------------------------------------------------------
> > mailbox: Add Tegra HSP driver
> > 
> > This contains the device tree bindings and a driver for the Tegra HSP, a
> > hardware block that provides hardware synchronization primitives and is
> > the foundation for inter-processor communication between CPU and BPMP.
> > 
> > ----------------------------------------------------------------
> > Dan Carpenter (1):
> >       mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
> > 
> > Joseph Lo (2):
> >       soc/tegra: Add Tegra186 support
> 
> I don't think you really needed to merge this in here, since all you need it
> for is to fulfill the kconfig dependency and enable the driver, right? That'd
> happen when the driver and soc branch is merged at the toplevel anyway.

The reason I did this is that I wanted each branch to be buildable as a
way to confirm that the dependencies are correct. In order to do that I
need the Kconfig symbol to enable the driver.

I suppose there are other ways I could've done that, though. Maybe in
the future new SoC Kconfig symbols should just be introduced way ahead
of time, so that they're already in a release or two before actual code
starts to emerge.

> Anyhow, no damage done, I've merged this in. I would say that it'd be a little
> more logical to send the SoC branch before the driver branch given this
> dependency though.

The reason that the SoC branch was sent after is because only the first
commit in that branch was pulled into the mailbox branch.

In retrospect, I think perhaps a better approach would've been to have a
separate branch with only the Kconfig symbol addition and pull that in
where needed.

Thanks,
Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161121/84d12034/attachment.sig>

Re: [GIT PULL 9/10] arm64: tegra: Device tree changes for v4.10-rc1

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 3463 bytes --]

On Fri, Nov 18, 2016 at 06:40:21PM -0800, Olof Johansson wrote:
> On Fri, Nov 18, 2016 at 05:17:18PM +0100, Thierry Reding wrote:
> > Hi ARM SoC maintainers,
> > 
> > The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> > 
> >   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> > 
> > are available in the git repository at:
> > 
> >   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm64-dt
> > 
> > for you to fetch changes up to cc13b4fa4ac780cec6c21b64a39ab2950e95e8f6:
> > 
> >   arm64: tegra: Add NVIDIA P2771 board support (2016-11-18 14:35:53 +0100)
> > 
> > Thanks,
> > Thierry
> > 
> > ----------------------------------------------------------------
> > arm64: tegra: Device tree changes for v4.10-rc1
> > 
> > This adds initial support for Tegra186, the P3310 processor module as
> > well as the P2771 development board. Not much is functional, but there
> > is enough to boot to an initial ramdisk with debug serial output.
> > 
> > ----------------------------------------------------------------
> > Dan Carpenter (1):
> >       mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
> > 
> > Joseph Lo (6):
> >       soc/tegra: Add Tegra186 support
> >       dt-bindings: mailbox: Add Tegra HSP binding
> >       dt-bindings: firmware: Add bindings for Tegra BPMP
> >       arm64: tegra: Add Tegra186 support
> >       arm64: tegra: Add NVIDIA P3310 processor module support
> >       arm64: tegra: Add NVIDIA P2771 board support
> > 
> > Stephen Warren (2):
> >       dt-bindings: Add power domains to Tegra BPMP firmware
> >       dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
> > 
> > Thierry Reding (12):
> >       Merge branch 'for-4.10/soc' into for-4.10/mailbox
> >       mailbox: Add Tegra HSP driver
> >       Merge branch 'for-4.10/mailbox' into for-4.10/firmware
> >       firmware: tegra: Add IVC library
> >       firmware: tegra: Add BPMP support
> >       Merge branch 'for-4.10/firmware' into for-4.10/arm64/dt
> >       arm64: tegra: Add CPU nodes for Tegra186
> >       arm64: tegra: Add serial ports on Tegra186
> >       arm64: tegra: Add I2C controllers on Tegra186
> >       arm64: tegra: Add SDHCI controllers on Tegra186
> >       arm64: tegra: Add GPIO controllers on Tegra186
> >       arm64: tegra: Enable PSCI on P3310
> 
> The drivers->dt dependency here is annoying. Any chance you can respin without
> it?
> 
> We've been encouraging people to consider using numerical clock/gpio/reset
> numbers on initial submission to avoid these dependencies on dt-bindings
> includes, and then follow up with a move to the symbolic names between -rc1 and
> -rc2. Mind doing the same here?

Yes, I can do that. Would it be acceptable to have a dt-bindings->dt
dependency? Stephen's already done a good job of avoiding this kind of
dependency by getting the bindings, and hence dt-bindings headers,
merged ahead of Linux kernel support because he had already gotten the
bindings reviewed and finalized during his work on U-Boot.

I've been told in the past that it's not necessary to strictly split DT
bindings patches from driver patches, but I suppose if a dt-bindings->dt
is acceptable, then splitting things up more strictly would actually be
the preferable solution here because it also avoids the slight churn of
converting to symbolic values later on.

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

[GIT PULL 9/10] arm64: tegra: Device tree changes for v4.10-rc1

[Thierry Reding]

On Fri, Nov 18, 2016 at 06:40:21PM -0800, Olof Johansson wrote:
> On Fri, Nov 18, 2016 at 05:17:18PM +0100, Thierry Reding wrote:
> > Hi ARM SoC maintainers,
> > 
> > The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> > 
> >   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> > 
> > are available in the git repository at:
> > 
> >   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm64-dt
> > 
> > for you to fetch changes up to cc13b4fa4ac780cec6c21b64a39ab2950e95e8f6:
> > 
> >   arm64: tegra: Add NVIDIA P2771 board support (2016-11-18 14:35:53 +0100)
> > 
> > Thanks,
> > Thierry
> > 
> > ----------------------------------------------------------------
> > arm64: tegra: Device tree changes for v4.10-rc1
> > 
> > This adds initial support for Tegra186, the P3310 processor module as
> > well as the P2771 development board. Not much is functional, but there
> > is enough to boot to an initial ramdisk with debug serial output.
> > 
> > ----------------------------------------------------------------
> > Dan Carpenter (1):
> >       mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
> > 
> > Joseph Lo (6):
> >       soc/tegra: Add Tegra186 support
> >       dt-bindings: mailbox: Add Tegra HSP binding
> >       dt-bindings: firmware: Add bindings for Tegra BPMP
> >       arm64: tegra: Add Tegra186 support
> >       arm64: tegra: Add NVIDIA P3310 processor module support
> >       arm64: tegra: Add NVIDIA P2771 board support
> > 
> > Stephen Warren (2):
> >       dt-bindings: Add power domains to Tegra BPMP firmware
> >       dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
> > 
> > Thierry Reding (12):
> >       Merge branch 'for-4.10/soc' into for-4.10/mailbox
> >       mailbox: Add Tegra HSP driver
> >       Merge branch 'for-4.10/mailbox' into for-4.10/firmware
> >       firmware: tegra: Add IVC library
> >       firmware: tegra: Add BPMP support
> >       Merge branch 'for-4.10/firmware' into for-4.10/arm64/dt
> >       arm64: tegra: Add CPU nodes for Tegra186
> >       arm64: tegra: Add serial ports on Tegra186
> >       arm64: tegra: Add I2C controllers on Tegra186
> >       arm64: tegra: Add SDHCI controllers on Tegra186
> >       arm64: tegra: Add GPIO controllers on Tegra186
> >       arm64: tegra: Enable PSCI on P3310
> 
> The drivers->dt dependency here is annoying. Any chance you can respin without
> it?
> 
> We've been encouraging people to consider using numerical clock/gpio/reset
> numbers on initial submission to avoid these dependencies on dt-bindings
> includes, and then follow up with a move to the symbolic names between -rc1 and
> -rc2. Mind doing the same here?

Yes, I can do that. Would it be acceptable to have a dt-bindings->dt
dependency? Stephen's already done a good job of avoiding this kind of
dependency by getting the bindings, and hence dt-bindings headers,
merged ahead of Linux kernel support because he had already gotten the
bindings reviewed and finalized during his work on U-Boot.

I've been told in the past that it's not necessary to strictly split DT
bindings patches from driver patches, but I suppose if a dt-bindings->dt
is acceptable, then splitting things up more strictly would actually be
the preferable solution here because it also avoids the slight churn of
converting to symbolic values later on.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161121/ca5e5c61/attachment-0001.sig>

Re: [GIT PULL 2/10] firmware: Add Tegra IVC and BPMP support

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 3180 bytes --]

On Fri, Nov 18, 2016 at 06:31:38PM -0800, Olof Johansson wrote:
> On Fri, Nov 18, 2016 at 05:17:11PM +0100, Thierry Reding wrote:
> > Hi ARM SoC maintainers,
> > 
> > The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> > 
> >   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> > 
> > are available in the git repository at:
> > 
> >   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-firmware
> > 
> > for you to fetch changes up to b704ed8095ee91af5f3f7343bb3be23aae1cb26d:
> > 
> >   dt-bindings: firmware: Allow child nodes inside the Tegra BPMP (2016-11-18 14:33:44 +0100)
> > 
> > Thanks,
> > Thierry
> > 
> > ----------------------------------------------------------------
> > firmware: Add Tegra IVC and BPMP support
> > 
> > IVC is an inter-processor communication protocol that uses shared memory
> > to exchange data between processors. The BPMP driver makes use of this
> > to communicate with the Boot and Power Management Processor (BPMP) and
> > uses an additional hardware synchronization primitive from the HSP block
> > to signal availability of new data (doorbell).
> > 
> > Firmware running on the BPMP implements a number of services such as the
> > control of clocks and resets within the system, or the ability to ungate
> > or gate power partitions.
> > 
> > ----------------------------------------------------------------
> > Dan Carpenter (1):
> >       mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
> > 
> > Joseph Lo (3):
> >       soc/tegra: Add Tegra186 support
> >       dt-bindings: mailbox: Add Tegra HSP binding
> >       dt-bindings: firmware: Add bindings for Tegra BPMP
> > 
> > Stephen Warren (2):
> >       dt-bindings: Add power domains to Tegra BPMP firmware
> >       dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
> > 
> > Thierry Reding (5):
> >       Merge branch 'for-4.10/soc' into for-4.10/mailbox
> >       mailbox: Add Tegra HSP driver
> >       Merge branch 'for-4.10/mailbox' into for-4.10/firmware
> >       firmware: tegra: Add IVC library
> >       firmware: tegra: Add BPMP support
> 
> Hi,
> 
> Again the format of the pull request here is a little confusing, since it's
> a cumulative shotlog and diffstat, while you already sent the bulk of this
> as part of the driver branch (1/10). It'd have been better to use that branch
> as the base when you generate the pull request since that's the delta we see
> when we merge it in.

In the past there had been occasions where it hadn't been clear what a
given branch was going to pull in as additional dependencies, so adding
the complete shortlog seemed like a good way to document this in a more
explicit way.

If you prefer working things out yourself I can tweak the scripts to
generate the pull requests on top of their respective dependencies.

> Also, I can't seem to find the key you use to sign these tags with, it isn't
> uploaded on pgp.mit.edu. Can you remedy that please, and get it signed as
> needed?

Works for me:

	http://pgp.mit.edu/pks/lookup?op=get&search=0xDD23ACD77F3EB3A1

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

[GIT PULL 2/10] firmware: Add Tegra IVC and BPMP support

[Thierry Reding]

On Fri, Nov 18, 2016 at 06:31:38PM -0800, Olof Johansson wrote:
> On Fri, Nov 18, 2016 at 05:17:11PM +0100, Thierry Reding wrote:
> > Hi ARM SoC maintainers,
> > 
> > The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> > 
> >   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> > 
> > are available in the git repository at:
> > 
> >   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-firmware
> > 
> > for you to fetch changes up to b704ed8095ee91af5f3f7343bb3be23aae1cb26d:
> > 
> >   dt-bindings: firmware: Allow child nodes inside the Tegra BPMP (2016-11-18 14:33:44 +0100)
> > 
> > Thanks,
> > Thierry
> > 
> > ----------------------------------------------------------------
> > firmware: Add Tegra IVC and BPMP support
> > 
> > IVC is an inter-processor communication protocol that uses shared memory
> > to exchange data between processors. The BPMP driver makes use of this
> > to communicate with the Boot and Power Management Processor (BPMP) and
> > uses an additional hardware synchronization primitive from the HSP block
> > to signal availability of new data (doorbell).
> > 
> > Firmware running on the BPMP implements a number of services such as the
> > control of clocks and resets within the system, or the ability to ungate
> > or gate power partitions.
> > 
> > ----------------------------------------------------------------
> > Dan Carpenter (1):
> >       mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
> > 
> > Joseph Lo (3):
> >       soc/tegra: Add Tegra186 support
> >       dt-bindings: mailbox: Add Tegra HSP binding
> >       dt-bindings: firmware: Add bindings for Tegra BPMP
> > 
> > Stephen Warren (2):
> >       dt-bindings: Add power domains to Tegra BPMP firmware
> >       dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
> > 
> > Thierry Reding (5):
> >       Merge branch 'for-4.10/soc' into for-4.10/mailbox
> >       mailbox: Add Tegra HSP driver
> >       Merge branch 'for-4.10/mailbox' into for-4.10/firmware
> >       firmware: tegra: Add IVC library
> >       firmware: tegra: Add BPMP support
> 
> Hi,
> 
> Again the format of the pull request here is a little confusing, since it's
> a cumulative shotlog and diffstat, while you already sent the bulk of this
> as part of the driver branch (1/10). It'd have been better to use that branch
> as the base when you generate the pull request since that's the delta we see
> when we merge it in.

In the past there had been occasions where it hadn't been clear what a
given branch was going to pull in as additional dependencies, so adding
the complete shortlog seemed like a good way to document this in a more
explicit way.

If you prefer working things out yourself I can tweak the scripts to
generate the pull requests on top of their respective dependencies.

> Also, I can't seem to find the key you use to sign these tags with, it isn't
> uploaded on pgp.mit.edu. Can you remedy that please, and get it signed as
> needed?

Works for me:

	http://pgp.mit.edu/pks/lookup?op=get&search=0xDD23ACD77F3EB3A1

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161121/a9fa1298/attachment.sig>

[GIT PULL v2 9/10] arm64: tegra: Device tree changes for v4.10-rc1

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm64-dt-numeric-ids

for you to fetch changes up to 99575bceebd60b572f0ccf9a900fdb970922ca49:

  arm64: tegra: Add NVIDIA P2771 board support (2016-11-21 10:43:42 +0100)

The only change since the original pull request is the replacement of
symbolic names in DTS files by their numerical equivalents to remove the
dependency on the driver branchs, as requested by Olof.

I have three patches to reintroduce these symbols that I can resend after
v4.10-rc1.

Thanks,
Thierry

----------------------------------------------------------------
arm64: tegra: Device tree changes for v4.10-rc1

This adds initial support for Tegra186, the P3310 processor module as
well as the P2771 development board. Not much is functional, but there
is enough to boot to an initial ramdisk with debug serial output.

----------------------------------------------------------------
Joseph Lo (3):
      arm64: tegra: Add Tegra186 support
      arm64: tegra: Add NVIDIA P3310 processor module support
      arm64: tegra: Add NVIDIA P2771 board support

Thierry Reding (6):
      arm64: tegra: Add CPU nodes for Tegra186
      arm64: tegra: Add serial ports on Tegra186
      arm64: tegra: Add I2C controllers on Tegra186
      arm64: tegra: Add SDHCI controllers on Tegra186
      arm64: tegra: Add GPIO controllers on Tegra186
      arm64: tegra: Enable PSCI on P3310

 arch/arm64/boot/dts/nvidia/Makefile                |   1 +
 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts |   8 +
 arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi     |  64 ++++
 arch/arm64/boot/dts/nvidia/tegra186.dtsi           | 398 +++++++++++++++++++++
 4 files changed, 471 insertions(+)
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra186.dtsi

[GIT PULL v2 9/10] arm64: tegra: Device tree changes for v4.10-rc1

[Thierry Reding]

Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm64-dt-numeric-ids

for you to fetch changes up to 99575bceebd60b572f0ccf9a900fdb970922ca49:

  arm64: tegra: Add NVIDIA P2771 board support (2016-11-21 10:43:42 +0100)

The only change since the original pull request is the replacement of
symbolic names in DTS files by their numerical equivalents to remove the
dependency on the driver branchs, as requested by Olof.

I have three patches to reintroduce these symbols that I can resend after
v4.10-rc1.

Thanks,
Thierry

----------------------------------------------------------------
arm64: tegra: Device tree changes for v4.10-rc1

This adds initial support for Tegra186, the P3310 processor module as
well as the P2771 development board. Not much is functional, but there
is enough to boot to an initial ramdisk with debug serial output.

----------------------------------------------------------------
Joseph Lo (3):
      arm64: tegra: Add Tegra186 support
      arm64: tegra: Add NVIDIA P3310 processor module support
      arm64: tegra: Add NVIDIA P2771 board support

Thierry Reding (6):
      arm64: tegra: Add CPU nodes for Tegra186
      arm64: tegra: Add serial ports on Tegra186
      arm64: tegra: Add I2C controllers on Tegra186
      arm64: tegra: Add SDHCI controllers on Tegra186
      arm64: tegra: Add GPIO controllers on Tegra186
      arm64: tegra: Enable PSCI on P3310

 arch/arm64/boot/dts/nvidia/Makefile                |   1 +
 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts |   8 +
 arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi     |  64 ++++
 arch/arm64/boot/dts/nvidia/tegra186.dtsi           | 398 +++++++++++++++++++++
 4 files changed, 471 insertions(+)
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra186.dtsi

Re: [GIT PULL v2 9/10] arm64: tegra: Device tree changes for v4.10-rc1

[Arnd Bergmann]

On Monday, November 21, 2016 11:23:12 AM CET Thierry Reding wrote:
> arm64: tegra: Device tree changes for v4.10-rc1
> 
> This adds initial support for Tegra186, the P3310 processor module as
> well as the P2771 development board. Not much is functional, but there
> is enough to boot to an initial ramdisk with debug serial output.
> 

Pulled into next/dt64, thanks!

	Arnd

[GIT PULL v2 9/10] arm64: tegra: Device tree changes for v4.10-rc1

[Arnd Bergmann]

On Monday, November 21, 2016 11:23:12 AM CET Thierry Reding wrote:
> arm64: tegra: Device tree changes for v4.10-rc1
> 
> This adds initial support for Tegra186, the P3310 processor module as
> well as the P2771 development board. Not much is functional, but there
> is enough to boot to an initial ramdisk with debug serial output.
> 

Pulled into next/dt64, thanks!

	Arnd

Re: [GIT PULL 10/10] arm64: tegra: Default configuration updates for v4.10-rc1

[Arnd Bergmann]

On Friday, November 18, 2016 5:17:19 PM CET Thierry Reding wrote:
> arm64: tegra: Default configuration updates for v4.10-rc1
> 
> Enable Tegra186 support.
> 

This was already in next/arm64 (but I didn't see a notification),
and with the arm64-dt branch now merged as well, we should have
everything you sent.

	Arnd

[GIT PULL 10/10] arm64: tegra: Default configuration updates for v4.10-rc1

[Arnd Bergmann]

On Friday, November 18, 2016 5:17:19 PM CET Thierry Reding wrote:
> arm64: tegra: Default configuration updates for v4.10-rc1
> 
> Enable Tegra186 support.
> 

This was already in next/arm64 (but I didn't see a notification),
and with the arm64-dt branch now merged as well, we should have
everything you sent.

	Arnd

Re: [GIT PULL 10/10] arm64: tegra: Default configuration updates for v4.10-rc1

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 649 bytes --]

On Wed, Nov 30, 2016 at 05:10:43PM +0100, Arnd Bergmann wrote:
> On Friday, November 18, 2016 5:17:19 PM CET Thierry Reding wrote:
> > arm64: tegra: Default configuration updates for v4.10-rc1
> > 
> > Enable Tegra186 support.
> > 
> 
> This was already in next/arm64 (but I didn't see a notification),
> and with the arm64-dt branch now merged as well, we should have
> everything you sent.

I had also sent a couple of individual patches that seemed to not have
it made into v4.9 and v4.8 for some reason (they were part of the pull
requests, as far as I can tell). Do you think you could pull those in
as well?

Thanks,
Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

[GIT PULL 10/10] arm64: tegra: Default configuration updates for v4.10-rc1

[Thierry Reding]

On Wed, Nov 30, 2016 at 05:10:43PM +0100, Arnd Bergmann wrote:
> On Friday, November 18, 2016 5:17:19 PM CET Thierry Reding wrote:
> > arm64: tegra: Default configuration updates for v4.10-rc1
> > 
> > Enable Tegra186 support.
> > 
> 
> This was already in next/arm64 (but I didn't see a notification),
> and with the arm64-dt branch now merged as well, we should have
> everything you sent.

I had also sent a couple of individual patches that seemed to not have
it made into v4.9 and v4.8 for some reason (they were part of the pull
requests, as far as I can tell). Do you think you could pull those in
as well?

Thanks,
Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161130/b14ea724/attachment.sig>

Re: [GIT PULL 10/10] arm64: tegra: Default configuration updates for v4.10-rc1

[Arnd Bergmann]

On Wednesday, November 30, 2016 5:39:29 PM CET Thierry Reding wrote:
> On Wed, Nov 30, 2016 at 05:10:43PM +0100, Arnd Bergmann wrote:
> > On Friday, November 18, 2016 5:17:19 PM CET Thierry Reding wrote:
> > > arm64: tegra: Default configuration updates for v4.10-rc1
> > > 
> > > Enable Tegra186 support.
> > > 
> > 
> > This was already in next/arm64 (but I didn't see a notification),
> > and with the arm64-dt branch now merged as well, we should have
> > everything you sent.
> 
> I had also sent a couple of individual patches that seemed to not have
> it made into v4.9 and v4.8 for some reason (they were part of the pull
> requests, as far as I can tell). Do you think you could pull those in
> as well?

Most likely yes, but I have trouble finding them right now. Can you
just resend them?

	Arnd

[GIT PULL 10/10] arm64: tegra: Default configuration updates for v4.10-rc1

[Arnd Bergmann]

On Wednesday, November 30, 2016 5:39:29 PM CET Thierry Reding wrote:
> On Wed, Nov 30, 2016 at 05:10:43PM +0100, Arnd Bergmann wrote:
> > On Friday, November 18, 2016 5:17:19 PM CET Thierry Reding wrote:
> > > arm64: tegra: Default configuration updates for v4.10-rc1
> > > 
> > > Enable Tegra186 support.
> > > 
> > 
> > This was already in next/arm64 (but I didn't see a notification),
> > and with the arm64-dt branch now merged as well, we should have
> > everything you sent.
> 
> I had also sent a couple of individual patches that seemed to not have
> it made into v4.9 and v4.8 for some reason (they were part of the pull
> requests, as far as I can tell). Do you think you could pull those in
> as well?

Most likely yes, but I have trouble finding them right now. Can you
just resend them?

	Arnd

Re: [GIT PULL 2/10] firmware: Add Tegra IVC and BPMP support

[Olof Johansson]

On Mon, Nov 21, 2016 at 09:29:59AM +0100, Thierry Reding wrote:
> On Fri, Nov 18, 2016 at 06:31:38PM -0800, Olof Johansson wrote:
> > On Fri, Nov 18, 2016 at 05:17:11PM +0100, Thierry Reding wrote:
> > > Hi ARM SoC maintainers,
> > > 
> > > The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> > > 
> > >   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> > > 
> > > are available in the git repository at:
> > > 
> > >   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-firmware
> > > 
> > > for you to fetch changes up to b704ed8095ee91af5f3f7343bb3be23aae1cb26d:
> > > 
> > >   dt-bindings: firmware: Allow child nodes inside the Tegra BPMP (2016-11-18 14:33:44 +0100)
> > > 
> > > Thanks,
> > > Thierry
> > > 
> > > ----------------------------------------------------------------
> > > firmware: Add Tegra IVC and BPMP support
> > > 
> > > IVC is an inter-processor communication protocol that uses shared memory
> > > to exchange data between processors. The BPMP driver makes use of this
> > > to communicate with the Boot and Power Management Processor (BPMP) and
> > > uses an additional hardware synchronization primitive from the HSP block
> > > to signal availability of new data (doorbell).
> > > 
> > > Firmware running on the BPMP implements a number of services such as the
> > > control of clocks and resets within the system, or the ability to ungate
> > > or gate power partitions.
> > > 
> > > ----------------------------------------------------------------
> > > Dan Carpenter (1):
> > >       mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
> > > 
> > > Joseph Lo (3):
> > >       soc/tegra: Add Tegra186 support
> > >       dt-bindings: mailbox: Add Tegra HSP binding
> > >       dt-bindings: firmware: Add bindings for Tegra BPMP
> > > 
> > > Stephen Warren (2):
> > >       dt-bindings: Add power domains to Tegra BPMP firmware
> > >       dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
> > > 
> > > Thierry Reding (5):
> > >       Merge branch 'for-4.10/soc' into for-4.10/mailbox
> > >       mailbox: Add Tegra HSP driver
> > >       Merge branch 'for-4.10/mailbox' into for-4.10/firmware
> > >       firmware: tegra: Add IVC library
> > >       firmware: tegra: Add BPMP support
> > 
> > Hi,
> > 
> > Again the format of the pull request here is a little confusing, since it's
> > a cumulative shotlog and diffstat, while you already sent the bulk of this
> > as part of the driver branch (1/10). It'd have been better to use that branch
> > as the base when you generate the pull request since that's the delta we see
> > when we merge it in.
> 
> In the past there had been occasions where it hadn't been clear what a
> given branch was going to pull in as additional dependencies, so adding
> the complete shortlog seemed like a good way to document this in a more
> explicit way.
> 
> If you prefer working things out yourself I can tweak the scripts to
> generate the pull requests on top of their respective dependencies.

It's really about the order we'll merge the patches and the diffstat that
git merge will generate and display (which is the one I usually verify
against).

So being clear is definitely useful, but doing the diffstat on the incremental
changes is still preferred.

> > Also, I can't seem to find the key you use to sign these tags with, it isn't
> > uploaded on pgp.mit.edu. Can you remedy that please, and get it signed as
> > needed?
> 
> Works for me:
> 
> 	http://pgp.mit.edu/pks/lookup?op=get&search=0xDD23ACD77F3EB3A1

Odd, I searched for it and didn't find it. But yeah, it's there.


-Olof

[GIT PULL 2/10] firmware: Add Tegra IVC and BPMP support

[Olof Johansson]

On Mon, Nov 21, 2016 at 09:29:59AM +0100, Thierry Reding wrote:
> On Fri, Nov 18, 2016 at 06:31:38PM -0800, Olof Johansson wrote:
> > On Fri, Nov 18, 2016 at 05:17:11PM +0100, Thierry Reding wrote:
> > > Hi ARM SoC maintainers,
> > > 
> > > The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> > > 
> > >   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> > > 
> > > are available in the git repository at:
> > > 
> > >   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-firmware
> > > 
> > > for you to fetch changes up to b704ed8095ee91af5f3f7343bb3be23aae1cb26d:
> > > 
> > >   dt-bindings: firmware: Allow child nodes inside the Tegra BPMP (2016-11-18 14:33:44 +0100)
> > > 
> > > Thanks,
> > > Thierry
> > > 
> > > ----------------------------------------------------------------
> > > firmware: Add Tegra IVC and BPMP support
> > > 
> > > IVC is an inter-processor communication protocol that uses shared memory
> > > to exchange data between processors. The BPMP driver makes use of this
> > > to communicate with the Boot and Power Management Processor (BPMP) and
> > > uses an additional hardware synchronization primitive from the HSP block
> > > to signal availability of new data (doorbell).
> > > 
> > > Firmware running on the BPMP implements a number of services such as the
> > > control of clocks and resets within the system, or the ability to ungate
> > > or gate power partitions.
> > > 
> > > ----------------------------------------------------------------
> > > Dan Carpenter (1):
> > >       mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
> > > 
> > > Joseph Lo (3):
> > >       soc/tegra: Add Tegra186 support
> > >       dt-bindings: mailbox: Add Tegra HSP binding
> > >       dt-bindings: firmware: Add bindings for Tegra BPMP
> > > 
> > > Stephen Warren (2):
> > >       dt-bindings: Add power domains to Tegra BPMP firmware
> > >       dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
> > > 
> > > Thierry Reding (5):
> > >       Merge branch 'for-4.10/soc' into for-4.10/mailbox
> > >       mailbox: Add Tegra HSP driver
> > >       Merge branch 'for-4.10/mailbox' into for-4.10/firmware
> > >       firmware: tegra: Add IVC library
> > >       firmware: tegra: Add BPMP support
> > 
> > Hi,
> > 
> > Again the format of the pull request here is a little confusing, since it's
> > a cumulative shotlog and diffstat, while you already sent the bulk of this
> > as part of the driver branch (1/10). It'd have been better to use that branch
> > as the base when you generate the pull request since that's the delta we see
> > when we merge it in.
> 
> In the past there had been occasions where it hadn't been clear what a
> given branch was going to pull in as additional dependencies, so adding
> the complete shortlog seemed like a good way to document this in a more
> explicit way.
> 
> If you prefer working things out yourself I can tweak the scripts to
> generate the pull requests on top of their respective dependencies.

It's really about the order we'll merge the patches and the diffstat that
git merge will generate and display (which is the one I usually verify
against).

So being clear is definitely useful, but doing the diffstat on the incremental
changes is still preferred.

> > Also, I can't seem to find the key you use to sign these tags with, it isn't
> > uploaded on pgp.mit.edu. Can you remedy that please, and get it signed as
> > needed?
> 
> Works for me:
> 
> 	http://pgp.mit.edu/pks/lookup?op=get&search=0xDD23ACD77F3EB3A1

Odd, I searched for it and didn't find it. But yeah, it's there.


-Olof

Re: [GIT PULL 9/10] arm64: tegra: Device tree changes for v4.10-rc1

[Olof Johansson]

On Mon, Nov 21, 2016 at 09:22:10AM +0100, Thierry Reding wrote:
> On Fri, Nov 18, 2016 at 06:40:21PM -0800, Olof Johansson wrote:
> > On Fri, Nov 18, 2016 at 05:17:18PM +0100, Thierry Reding wrote:
> > > Hi ARM SoC maintainers,
> > > 
> > > The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> > > 
> > >   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> > > 
> > > are available in the git repository at:
> > > 
> > >   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm64-dt
> > > 
> > > for you to fetch changes up to cc13b4fa4ac780cec6c21b64a39ab2950e95e8f6:
> > > 
> > >   arm64: tegra: Add NVIDIA P2771 board support (2016-11-18 14:35:53 +0100)
> > > 
> > > Thanks,
> > > Thierry
> > > 
> > > ----------------------------------------------------------------
> > > arm64: tegra: Device tree changes for v4.10-rc1
> > > 
> > > This adds initial support for Tegra186, the P3310 processor module as
> > > well as the P2771 development board. Not much is functional, but there
> > > is enough to boot to an initial ramdisk with debug serial output.
> > > 
> > > ----------------------------------------------------------------
> > > Dan Carpenter (1):
> > >       mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
> > > 
> > > Joseph Lo (6):
> > >       soc/tegra: Add Tegra186 support
> > >       dt-bindings: mailbox: Add Tegra HSP binding
> > >       dt-bindings: firmware: Add bindings for Tegra BPMP
> > >       arm64: tegra: Add Tegra186 support
> > >       arm64: tegra: Add NVIDIA P3310 processor module support
> > >       arm64: tegra: Add NVIDIA P2771 board support
> > > 
> > > Stephen Warren (2):
> > >       dt-bindings: Add power domains to Tegra BPMP firmware
> > >       dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
> > > 
> > > Thierry Reding (12):
> > >       Merge branch 'for-4.10/soc' into for-4.10/mailbox
> > >       mailbox: Add Tegra HSP driver
> > >       Merge branch 'for-4.10/mailbox' into for-4.10/firmware
> > >       firmware: tegra: Add IVC library
> > >       firmware: tegra: Add BPMP support
> > >       Merge branch 'for-4.10/firmware' into for-4.10/arm64/dt
> > >       arm64: tegra: Add CPU nodes for Tegra186
> > >       arm64: tegra: Add serial ports on Tegra186
> > >       arm64: tegra: Add I2C controllers on Tegra186
> > >       arm64: tegra: Add SDHCI controllers on Tegra186
> > >       arm64: tegra: Add GPIO controllers on Tegra186
> > >       arm64: tegra: Enable PSCI on P3310
> > 
> > The drivers->dt dependency here is annoying. Any chance you can respin without
> > it?
> > 
> > We've been encouraging people to consider using numerical clock/gpio/reset
> > numbers on initial submission to avoid these dependencies on dt-bindings
> > includes, and then follow up with a move to the symbolic names between -rc1 and
> > -rc2. Mind doing the same here?
> 
> Yes, I can do that. Would it be acceptable to have a dt-bindings->dt
> dependency? Stephen's already done a good job of avoiding this kind of
> dependency by getting the bindings, and hence dt-bindings headers,
> merged ahead of Linux kernel support because he had already gotten the
> bindings reviewed and finalized during his work on U-Boot.
> 
> I've been told in the past that it's not necessary to strictly split DT
> bindings patches from driver patches, but I suppose if a dt-bindings->dt
> is acceptable, then splitting things up more strictly would actually be
> the preferable solution here because it also avoids the slight churn of
> converting to symbolic values later on.

Sorry, haven't been looking at this older for a while so this reply is
high-latency.

If you want to do a separate dt-bindings branch that includes the headers and
is present in both the dt and drivers branch, that'd work. If the changes are
trivial though, and just contains a few clocks, I think we should just have
them opencoded on the original merge, and then move over once the include files
have gone in. I'd be willing to merge such conversions between -rc1 and -rc2.

That's in particular the case when there's an external driver tree/maintainer,
since it avoids the three-way handshake, etc.


-Olof

[GIT PULL 9/10] arm64: tegra: Device tree changes for v4.10-rc1

[Olof Johansson]

On Mon, Nov 21, 2016 at 09:22:10AM +0100, Thierry Reding wrote:
> On Fri, Nov 18, 2016 at 06:40:21PM -0800, Olof Johansson wrote:
> > On Fri, Nov 18, 2016 at 05:17:18PM +0100, Thierry Reding wrote:
> > > Hi ARM SoC maintainers,
> > > 
> > > The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> > > 
> > >   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> > > 
> > > are available in the git repository at:
> > > 
> > >   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm64-dt
> > > 
> > > for you to fetch changes up to cc13b4fa4ac780cec6c21b64a39ab2950e95e8f6:
> > > 
> > >   arm64: tegra: Add NVIDIA P2771 board support (2016-11-18 14:35:53 +0100)
> > > 
> > > Thanks,
> > > Thierry
> > > 
> > > ----------------------------------------------------------------
> > > arm64: tegra: Device tree changes for v4.10-rc1
> > > 
> > > This adds initial support for Tegra186, the P3310 processor module as
> > > well as the P2771 development board. Not much is functional, but there
> > > is enough to boot to an initial ramdisk with debug serial output.
> > > 
> > > ----------------------------------------------------------------
> > > Dan Carpenter (1):
> > >       mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
> > > 
> > > Joseph Lo (6):
> > >       soc/tegra: Add Tegra186 support
> > >       dt-bindings: mailbox: Add Tegra HSP binding
> > >       dt-bindings: firmware: Add bindings for Tegra BPMP
> > >       arm64: tegra: Add Tegra186 support
> > >       arm64: tegra: Add NVIDIA P3310 processor module support
> > >       arm64: tegra: Add NVIDIA P2771 board support
> > > 
> > > Stephen Warren (2):
> > >       dt-bindings: Add power domains to Tegra BPMP firmware
> > >       dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
> > > 
> > > Thierry Reding (12):
> > >       Merge branch 'for-4.10/soc' into for-4.10/mailbox
> > >       mailbox: Add Tegra HSP driver
> > >       Merge branch 'for-4.10/mailbox' into for-4.10/firmware
> > >       firmware: tegra: Add IVC library
> > >       firmware: tegra: Add BPMP support
> > >       Merge branch 'for-4.10/firmware' into for-4.10/arm64/dt
> > >       arm64: tegra: Add CPU nodes for Tegra186
> > >       arm64: tegra: Add serial ports on Tegra186
> > >       arm64: tegra: Add I2C controllers on Tegra186
> > >       arm64: tegra: Add SDHCI controllers on Tegra186
> > >       arm64: tegra: Add GPIO controllers on Tegra186
> > >       arm64: tegra: Enable PSCI on P3310
> > 
> > The drivers->dt dependency here is annoying. Any chance you can respin without
> > it?
> > 
> > We've been encouraging people to consider using numerical clock/gpio/reset
> > numbers on initial submission to avoid these dependencies on dt-bindings
> > includes, and then follow up with a move to the symbolic names between -rc1 and
> > -rc2. Mind doing the same here?
> 
> Yes, I can do that. Would it be acceptable to have a dt-bindings->dt
> dependency? Stephen's already done a good job of avoiding this kind of
> dependency by getting the bindings, and hence dt-bindings headers,
> merged ahead of Linux kernel support because he had already gotten the
> bindings reviewed and finalized during his work on U-Boot.
> 
> I've been told in the past that it's not necessary to strictly split DT
> bindings patches from driver patches, but I suppose if a dt-bindings->dt
> is acceptable, then splitting things up more strictly would actually be
> the preferable solution here because it also avoids the slight churn of
> converting to symbolic values later on.

Sorry, haven't been looking at this older for a while so this reply is
high-latency.

If you want to do a separate dt-bindings branch that includes the headers and
is present in both the dt and drivers branch, that'd work. If the changes are
trivial though, and just contains a few clocks, I think we should just have
them opencoded on the original merge, and then move over once the include files
have gone in. I'd be willing to merge such conversions between -rc1 and -rc2.

That's in particular the case when there's an external driver tree/maintainer,
since it avoids the three-way handshake, etc.


-Olof

Re: [GIT PULL 1/10] mailbox: Add Tegra HSP driver

[Olof Johansson]

On Mon, Nov 21, 2016 at 09:17:52AM +0100, Thierry Reding wrote:
> On Fri, Nov 18, 2016 at 06:27:42PM -0800, Olof Johansson wrote:
> > Hi,
> > 
> > On Fri, Nov 18, 2016 at 05:17:10PM +0100, Thierry Reding wrote:
> > > Hi ARM SoC maintainers,
> > > 
> > > The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> > > 
> > >   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> > > 
> > > are available in the git repository at:
> > > 
> > >   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-mailbox
> > > 
> > > for you to fetch changes up to 68050eb6c611527232fe5574c7306e97e47499ef:
> > > 
> > >   mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells() (2016-11-18 14:32:13 +0100)
> > > 
> > > Thanks,
> > > Thierry
> > > 
> > > ----------------------------------------------------------------
> > > mailbox: Add Tegra HSP driver
> > > 
> > > This contains the device tree bindings and a driver for the Tegra HSP, a
> > > hardware block that provides hardware synchronization primitives and is
> > > the foundation for inter-processor communication between CPU and BPMP.
> > > 
> > > ----------------------------------------------------------------
> > > Dan Carpenter (1):
> > >       mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
> > > 
> > > Joseph Lo (2):
> > >       soc/tegra: Add Tegra186 support
> > 
> > I don't think you really needed to merge this in here, since all you need it
> > for is to fulfill the kconfig dependency and enable the driver, right? That'd
> > happen when the driver and soc branch is merged at the toplevel anyway.
> 
> The reason I did this is that I wanted each branch to be buildable as a
> way to confirm that the dependencies are correct. In order to do that I
> need the Kconfig symbol to enable the driver.

Good point, but that's more of a local setup thing for you, and not something
that necessarily needs to go upstream.

> I suppose there are other ways I could've done that, though. Maybe in
> the future new SoC Kconfig symbols should just be introduced way ahead
> of time, so that they're already in a release or two before actual code
> starts to emerge.

That'd work too!

> > Anyhow, no damage done, I've merged this in. I would say that it'd be a little
> > more logical to send the SoC branch before the driver branch given this
> > dependency though.
> 
> The reason that the SoC branch was sent after is because only the first
> commit in that branch was pulled into the mailbox branch.
> 
> In retrospect, I think perhaps a better approach would've been to have a
> separate branch with only the Kconfig symbol addition and pull that in
> where needed.

That could work, but the whole branch-merge-features-then-enable it workflow is
quite acceptable as well.


-Olof

[GIT PULL 1/10] mailbox: Add Tegra HSP driver

[Olof Johansson]

On Mon, Nov 21, 2016 at 09:17:52AM +0100, Thierry Reding wrote:
> On Fri, Nov 18, 2016 at 06:27:42PM -0800, Olof Johansson wrote:
> > Hi,
> > 
> > On Fri, Nov 18, 2016 at 05:17:10PM +0100, Thierry Reding wrote:
> > > Hi ARM SoC maintainers,
> > > 
> > > The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> > > 
> > >   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> > > 
> > > are available in the git repository at:
> > > 
> > >   git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-mailbox
> > > 
> > > for you to fetch changes up to 68050eb6c611527232fe5574c7306e97e47499ef:
> > > 
> > >   mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells() (2016-11-18 14:32:13 +0100)
> > > 
> > > Thanks,
> > > Thierry
> > > 
> > > ----------------------------------------------------------------
> > > mailbox: Add Tegra HSP driver
> > > 
> > > This contains the device tree bindings and a driver for the Tegra HSP, a
> > > hardware block that provides hardware synchronization primitives and is
> > > the foundation for inter-processor communication between CPU and BPMP.
> > > 
> > > ----------------------------------------------------------------
> > > Dan Carpenter (1):
> > >       mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
> > > 
> > > Joseph Lo (2):
> > >       soc/tegra: Add Tegra186 support
> > 
> > I don't think you really needed to merge this in here, since all you need it
> > for is to fulfill the kconfig dependency and enable the driver, right? That'd
> > happen when the driver and soc branch is merged at the toplevel anyway.
> 
> The reason I did this is that I wanted each branch to be buildable as a
> way to confirm that the dependencies are correct. In order to do that I
> need the Kconfig symbol to enable the driver.

Good point, but that's more of a local setup thing for you, and not something
that necessarily needs to go upstream.

> I suppose there are other ways I could've done that, though. Maybe in
> the future new SoC Kconfig symbols should just be introduced way ahead
> of time, so that they're already in a release or two before actual code
> starts to emerge.

That'd work too!

> > Anyhow, no damage done, I've merged this in. I would say that it'd be a little
> > more logical to send the SoC branch before the driver branch given this
> > dependency though.
> 
> The reason that the SoC branch was sent after is because only the first
> commit in that branch was pulled into the mailbox branch.
> 
> In retrospect, I think perhaps a better approach would've been to have a
> separate branch with only the Kconfig symbol addition and pull that in
> where needed.

That could work, but the whole branch-merge-features-then-enable it workflow is
quite acceptable as well.


-Olof