[PATCHv7 0/5] SB: ohci-da8xx: Add device tree support

[PATCHv7 0/5] SB: ohci-da8xx: Add device tree support

[Axel Haslam]

When booting using device tree, we can not make use of
platform callbacks to handle vbus and over current gpios.

This series allows the ohci-da8xx driver to use a regulator
instead of the platform callbacks to control vbus and adds
the device tree bindings to be able to probe using DT.

Once all users of the platform callbacks will be converted to
use a regulator, we will be able to remove platform data completely.

**DEPENDENCY**:
These patches depend on a regulator patch that is
merged into linux-next, but not yet on usb-next:

regulator: core: Add new API to poll for error conditions
https://lkml.org/lkml/2016/11/3/191


Changes from v6->v7
* remove print on over current event as the usb core already does it (David)
* fix ocic mask for regulator event (David)
* spelling fix and tested-by on first patch.
* skip error message on probe defer from regulator (David)

Changes from v5->v6
* Fix regulator over current flag check (David)
* Spelling fixes and code cleanups (David)
* add Ack for device tree binding

Changes from v4->v5
* Append the Device tree patches to v4.
* Submit only the first part of the series (no dependencies).
this can be applied and merged through the usb tree.

Changes from v3->v4
* separate the series into smaller series for driver and arch/arm code,
  to ease review and merging to different trees.

Changes form v2->v3
* drop patches that have been integrated to arch/arm
* drop regulator patches which will be integrated through regulator tree
* use of the accepted regulator API to get over current status
* better patch separation with the use of wrappers

Changes from v1->v2
* Rebased and added patch to make ohci a separate driver
* Use a regulator instead of handling Gpios (David Lechner)
* Add an over current mode to regulator framework
* Fixed regulator is able to register for and over current irq
* Added patch by Alexandre to remove build warnings
* Moved global variables into private hcd structure.
Axel Haslam (5):
  USB: ohci: da8xx: use ohci priv data instead of globals
  USB: ohci: da8xx: Add wrappers for platform callbacks
  USB: ohci: da8xx: Allow a regulator to handle VBUS
  USB: ohci: da8xx: Add devicetree bindings
  USB: ohci: da8xx: Allow probing from DT

 .../devicetree/bindings/usb/ohci-da8xx.txt         |  23 ++
 drivers/usb/host/ohci-da8xx.c                      | 290 +++++++++++++++++----
 2 files changed, 263 insertions(+), 50 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/ohci-da8xx.txt

-- 
2.9.3

[PATCHv7 1/5] USB: ohci: da8xx: use ohci priv data instead of globals

[Axel Haslam]

Instead of global variables, use the extra_priv_size of
the ohci driver.

We cannot yet move the ocic mask because this is used on
the interrupt handler which is registered through platform
data and does not have an hcd pointer. This will be moved
on a later patch.

Tested-by: David Lechner <david@lechnology.com>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
 drivers/usb/host/ohci-da8xx.c | 73 +++++++++++++++++++++++++------------------
 1 file changed, 43 insertions(+), 30 deletions(-)

diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index bd6cf3c..cd75677 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -35,43 +35,50 @@ static int (*orig_ohci_hub_control)(struct usb_hcd  *hcd, u16 typeReq,
 			u16 wValue, u16 wIndex, char *buf, u16 wLength);
 static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf);
 
-static struct clk *usb11_clk;
-static struct phy *usb11_phy;
+struct da8xx_ohci_hcd {
+	struct clk *usb11_clk;
+	struct phy *usb11_phy;
+};
+
+#define to_da8xx_ohci(hcd) (struct da8xx_ohci_hcd *)(hcd_to_ohci(hcd)->priv)
 
 /* Over-current indicator change bitmask */
 static volatile u16 ocic_mask;
 
-static int ohci_da8xx_enable(void)
+static int ohci_da8xx_enable(struct usb_hcd *hcd)
 {
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
 	int ret;
 
-	ret = clk_prepare_enable(usb11_clk);
+	ret = clk_prepare_enable(da8xx_ohci->usb11_clk);
 	if (ret)
 		return ret;
 
-	ret = phy_init(usb11_phy);
+	ret = phy_init(da8xx_ohci->usb11_phy);
 	if (ret)
 		goto err_phy_init;
 
-	ret = phy_power_on(usb11_phy);
+	ret = phy_power_on(da8xx_ohci->usb11_phy);
 	if (ret)
 		goto err_phy_power_on;
 
 	return 0;
 
 err_phy_power_on:
-	phy_exit(usb11_phy);
+	phy_exit(da8xx_ohci->usb11_phy);
 err_phy_init:
-	clk_disable_unprepare(usb11_clk);
+	clk_disable_unprepare(da8xx_ohci->usb11_clk);
 
 	return ret;
 }
 
-static void ohci_da8xx_disable(void)
+static void ohci_da8xx_disable(struct usb_hcd *hcd)
 {
-	phy_power_off(usb11_phy);
-	phy_exit(usb11_phy);
-	clk_disable_unprepare(usb11_clk);
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+
+	phy_power_off(da8xx_ohci->usb11_phy);
+	phy_exit(da8xx_ohci->usb11_phy);
+	clk_disable_unprepare(da8xx_ohci->usb11_clk);
 }
 
 /*
@@ -97,7 +104,7 @@ static int ohci_da8xx_reset(struct usb_hcd *hcd)
 
 	dev_dbg(dev, "starting USB controller\n");
 
-	result = ohci_da8xx_enable();
+	result = ohci_da8xx_enable(hcd);
 	if (result < 0)
 		return result;
 
@@ -109,7 +116,7 @@ static int ohci_da8xx_reset(struct usb_hcd *hcd)
 
 	result = ohci_setup(hcd);
 	if (result < 0) {
-		ohci_da8xx_disable();
+		ohci_da8xx_disable(hcd);
 		return result;
 	}
 
@@ -231,6 +238,7 @@ static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 static int ohci_da8xx_probe(struct platform_device *pdev)
 {
 	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(&pdev->dev);
+	struct da8xx_ohci_hcd *da8xx_ohci;
 	struct usb_hcd	*hcd;
 	struct resource *mem;
 	int error, irq;
@@ -238,25 +246,29 @@ static int ohci_da8xx_probe(struct platform_device *pdev)
 	if (hub == NULL)
 		return -ENODEV;
 
-	usb11_clk = devm_clk_get(&pdev->dev, "usb11");
-	if (IS_ERR(usb11_clk)) {
-		if (PTR_ERR(usb11_clk) != -EPROBE_DEFER)
+	hcd = usb_create_hcd(&ohci_da8xx_hc_driver, &pdev->dev,
+				dev_name(&pdev->dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	da8xx_ohci = to_da8xx_ohci(hcd);
+
+	da8xx_ohci->usb11_clk = devm_clk_get(&pdev->dev, "usb11");
+	if (IS_ERR(da8xx_ohci->usb11_clk)) {
+		error = PTR_ERR(da8xx_ohci->usb11_clk);
+		if (error != -EPROBE_DEFER)
 			dev_err(&pdev->dev, "Failed to get clock.\n");
-		return PTR_ERR(usb11_clk);
+		goto err;
 	}
 
-	usb11_phy = devm_phy_get(&pdev->dev, "usb-phy");
-	if (IS_ERR(usb11_phy)) {
-		if (PTR_ERR(usb11_phy) != -EPROBE_DEFER)
+	da8xx_ohci->usb11_phy = devm_phy_get(&pdev->dev, "usb-phy");
+	if (IS_ERR(da8xx_ohci->usb11_phy)) {
+		error = PTR_ERR(da8xx_ohci->usb11_phy);
+		if (error != -EPROBE_DEFER)
 			dev_err(&pdev->dev, "Failed to get phy.\n");
-		return PTR_ERR(usb11_phy);
+		goto err;
 	}
 
-	hcd = usb_create_hcd(&ohci_da8xx_hc_driver, &pdev->dev,
-				dev_name(&pdev->dev));
-	if (!hcd)
-		return -ENOMEM;
-
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	hcd->regs = devm_ioremap_resource(&pdev->dev, mem);
 	if (IS_ERR(hcd->regs)) {
@@ -320,7 +332,7 @@ static int ohci_da8xx_suspend(struct platform_device *pdev,
 	if (ret)
 		return ret;
 
-	ohci_da8xx_disable();
+	ohci_da8xx_disable(hcd);
 	hcd->state = HC_STATE_SUSPENDED;
 
 	return ret;
@@ -336,7 +348,7 @@ static int ohci_da8xx_resume(struct platform_device *dev)
 		msleep(5);
 	ohci->next_statechange = jiffies;
 
-	ret = ohci_da8xx_enable();
+	ret = ohci_da8xx_enable(hcd);
 	if (ret)
 		return ret;
 
@@ -348,7 +360,8 @@ static int ohci_da8xx_resume(struct platform_device *dev)
 #endif
 
 static const struct ohci_driver_overrides da8xx_overrides __initconst = {
-	.reset		= ohci_da8xx_reset,
+	.reset		 = ohci_da8xx_reset,
+	.extra_priv_size = sizeof(struct da8xx_ohci_hcd),
 };
 
 /*
-- 
2.9.3

[PATCHv7 2/5] USB: ohci: da8xx: Add wrappers for platform callbacks

[Axel Haslam]

To migrate to a DT based boot, we will remove the use of platform
callbacks, in favor of using the regulator framework to handle
vbus and over current.

In preparation to use a regulator instead of callbacks, move the platform
data callbacks into separate functions. This provides well defined place
to for the regulator API to coexist with the platform callbacks before
all users are converted.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
 drivers/usb/host/ohci-da8xx.c | 125 ++++++++++++++++++++++++++++++++++--------
 1 file changed, 102 insertions(+), 23 deletions(-)

diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index cd75677..aab4e3a 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -81,6 +81,72 @@ static void ohci_da8xx_disable(struct usb_hcd *hcd)
 	clk_disable_unprepare(da8xx_ohci->usb11_clk);
 }
 
+static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
+{
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+
+	if (hub && hub->set_power)
+		return hub->set_power(1, on);
+
+	return 0;
+}
+
+static int ohci_da8xx_get_power(struct usb_hcd *hcd)
+{
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+
+	if (hub && hub->get_power)
+		return hub->get_power(1);
+
+	return 1;
+}
+
+static int ohci_da8xx_get_oci(struct usb_hcd *hcd)
+{
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+
+	if (hub && hub->get_oci)
+		return hub->get_oci(1);
+
+	return 0;
+}
+
+static int ohci_da8xx_has_set_power(struct usb_hcd *hcd)
+{
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+
+	if (hub && hub->set_power)
+		return 1;
+
+	return 0;
+}
+
+static int ohci_da8xx_has_oci(struct usb_hcd *hcd)
+{
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+
+	if (hub && hub->get_oci)
+		return 1;
+
+	return 0;
+}
+
+static int ohci_da8xx_has_potpgt(struct usb_hcd *hcd)
+{
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+
+	if (hub && hub->potpgt)
+		return 1;
+
+	return 0;
+}
+
 /*
  * Handle the port over-current indicator change.
  */
@@ -94,6 +160,26 @@ static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub,
 		hub->set_power(port, 0);
 }
 
+static int ohci_da8xx_register_notify(struct usb_hcd *hcd)
+{
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+
+	if (hub && hub->ocic_notify)
+		return hub->ocic_notify(ohci_da8xx_ocic_handler);
+
+	return 0;
+}
+
+static void ohci_da8xx_unregister_notify(struct usb_hcd *hcd)
+{
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+
+	if (hub && hub->ocic_notify)
+		hub->ocic_notify(NULL);
+}
+
 static int ohci_da8xx_reset(struct usb_hcd *hcd)
 {
 	struct device *dev		= hcd->self.controller;
@@ -127,16 +213,18 @@ static int ohci_da8xx_reset(struct usb_hcd *hcd)
 	 * the correct hub descriptor...
 	 */
 	rh_a = ohci_readl(ohci, &ohci->regs->roothub.a);
-	if (hub->set_power) {
+	if (ohci_da8xx_has_set_power(hcd)) {
 		rh_a &= ~RH_A_NPS;
 		rh_a |=  RH_A_PSM;
 	}
-	if (hub->get_oci) {
+	if (ohci_da8xx_has_oci(hcd)) {
 		rh_a &= ~RH_A_NOCP;
 		rh_a |=  RH_A_OCPM;
 	}
-	rh_a &= ~RH_A_POTPGT;
-	rh_a |= hub->potpgt << 24;
+	if (ohci_da8xx_has_potpgt(hcd)) {
+		rh_a &= ~RH_A_POTPGT;
+		rh_a |= hub->potpgt << 24;
+	}
 	ohci_writel(ohci, rh_a, &ohci->regs->roothub.a);
 
 	return result;
@@ -169,7 +257,6 @@ static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				  u16 wIndex, char *buf, u16 wLength)
 {
 	struct device *dev		= hcd->self.controller;
-	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
 	int temp;
 
 	switch (typeReq) {
@@ -183,11 +270,11 @@ static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1);
 
 		/* The port power status (PPS) bit defaults to 1 */
-		if (hub->get_power && hub->get_power(wIndex) == 0)
+		if (!ohci_da8xx_get_power(hcd))
 			temp &= ~RH_PS_PPS;
 
 		/* The port over-current indicator (POCI) bit is always 0 */
-		if (hub->get_oci && hub->get_oci(wIndex) > 0)
+		if (ohci_da8xx_get_oci(hcd) > 0)
 			temp |=  RH_PS_POCI;
 
 		/* The over-current indicator change (OCIC) bit is 0 too */
@@ -212,10 +299,7 @@ static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			dev_dbg(dev, "%sPortFeature(%u): %s\n",
 				temp ? "Set" : "Clear", wIndex, "POWER");
 
-			if (!hub->set_power)
-				return -EPIPE;
-
-			return hub->set_power(wIndex, temp) ? -EPIPE : 0;
+			return ohci_da8xx_set_power(hcd, temp) ? -EPIPE : 0;
 		case USB_PORT_FEAT_C_OVER_CURRENT:
 			dev_dbg(dev, "%sPortFeature(%u): %s\n",
 				temp ? "Set" : "Clear", wIndex,
@@ -237,15 +321,10 @@ static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 
 static int ohci_da8xx_probe(struct platform_device *pdev)
 {
-	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(&pdev->dev);
 	struct da8xx_ohci_hcd *da8xx_ohci;
 	struct usb_hcd	*hcd;
 	struct resource *mem;
 	int error, irq;
-
-	if (hub == NULL)
-		return -ENODEV;
-
 	hcd = usb_create_hcd(&ohci_da8xx_hc_driver, &pdev->dev,
 				dev_name(&pdev->dev));
 	if (!hcd)
@@ -290,12 +369,13 @@ static int ohci_da8xx_probe(struct platform_device *pdev)
 
 	device_wakeup_enable(hcd->self.controller);
 
-	if (hub->ocic_notify) {
-		error = hub->ocic_notify(ohci_da8xx_ocic_handler);
-		if (!error)
-			return 0;
-	}
+	error = ohci_da8xx_register_notify(hcd);
+	if (error)
+		goto err_remove_hcd;
+
+	return 0;
 
+err_remove_hcd:
 	usb_remove_hcd(hcd);
 err:
 	usb_put_hcd(hcd);
@@ -305,9 +385,8 @@ static int ohci_da8xx_probe(struct platform_device *pdev)
 static int ohci_da8xx_remove(struct platform_device *pdev)
 {
 	struct usb_hcd	*hcd = platform_get_drvdata(pdev);
-	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(&pdev->dev);
 
-	hub->ocic_notify(NULL);
+	ohci_da8xx_unregister_notify(hcd);
 	usb_remove_hcd(hcd);
 	usb_put_hcd(hcd);
 
-- 
2.9.3

[PATCHv7 3/5] USB: ohci: da8xx: Allow a regulator to handle VBUS

[Axel Haslam]

Using a regulator to handle VBUS will eliminate the need for
platform data and callbacks, and make the driver more generic
allowing different types of regulators to handle VBUS.

The regulator equivalents to the platform callbacks are:
    set_power   ->  regulator_enable/regulator_disable
    get_power   ->  regulator_is_enabled
    get_oci     ->  regulator_get_error_flags
    ocic_notify ->  regulator event notification

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
 drivers/usb/host/ohci-da8xx.c | 96 +++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 93 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index aab4e3a..07366ae 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -20,6 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_data/usb-davinci.h>
+#include <linux/regulator/consumer.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
 #include <asm/unaligned.h>
@@ -36,8 +37,12 @@ static int (*orig_ohci_hub_control)(struct usb_hcd  *hcd, u16 typeReq,
 static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf);
 
 struct da8xx_ohci_hcd {
+	struct usb_hcd *hcd;
 	struct clk *usb11_clk;
 	struct phy *usb11_phy;
+	struct regulator *vbus_reg;
+	struct notifier_block nb;
+	unsigned int reg_enabled;
 };
 
 #define to_da8xx_ohci(hcd) (struct da8xx_ohci_hcd *)(hcd_to_ohci(hcd)->priv)
@@ -83,56 +88,103 @@ static void ohci_da8xx_disable(struct usb_hcd *hcd)
 
 static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
 {
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
 	struct device *dev		= hcd->self.controller;
 	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+	int ret;
 
 	if (hub && hub->set_power)
 		return hub->set_power(1, on);
 
+	if (!da8xx_ohci->vbus_reg)
+		return 0;
+
+	if (on && !da8xx_ohci->reg_enabled) {
+		ret = regulator_enable(da8xx_ohci->vbus_reg);
+		if (ret) {
+			dev_err(dev, "Failed to enable regulator: %d\n", ret);
+			return ret;
+		}
+		da8xx_ohci->reg_enabled = 1;
+
+	} else if (!on && da8xx_ohci->reg_enabled) {
+		ret = regulator_disable(da8xx_ohci->vbus_reg);
+		if (ret) {
+			dev_err(dev, "Failed  to disable regulator: %d\n", ret);
+			return ret;
+		}
+		da8xx_ohci->reg_enabled = 0;
+	}
+
 	return 0;
 }
 
 static int ohci_da8xx_get_power(struct usb_hcd *hcd)
 {
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
 	struct device *dev		= hcd->self.controller;
 	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
 
 	if (hub && hub->get_power)
 		return hub->get_power(1);
 
+	if (da8xx_ohci->vbus_reg)
+		return regulator_is_enabled(da8xx_ohci->vbus_reg);
+
 	return 1;
 }
 
 static int ohci_da8xx_get_oci(struct usb_hcd *hcd)
 {
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
 	struct device *dev		= hcd->self.controller;
 	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+	unsigned int flags;
+	int ret;
 
 	if (hub && hub->get_oci)
 		return hub->get_oci(1);
 
+	if (!da8xx_ohci->vbus_reg)
+		return 0;
+
+	ret = regulator_get_error_flags(da8xx_ohci->vbus_reg, &flags);
+	if (ret)
+		return ret;
+
+	if (flags & REGULATOR_ERROR_OVER_CURRENT)
+		return 1;
+
 	return 0;
 }
 
 static int ohci_da8xx_has_set_power(struct usb_hcd *hcd)
 {
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
 	struct device *dev		= hcd->self.controller;
 	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
 
 	if (hub && hub->set_power)
 		return 1;
 
+	if (da8xx_ohci->vbus_reg)
+		return 1;
+
 	return 0;
 }
 
 static int ohci_da8xx_has_oci(struct usb_hcd *hcd)
 {
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
 	struct device *dev		= hcd->self.controller;
 	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
 
 	if (hub && hub->get_oci)
 		return 1;
 
+	if (da8xx_ohci->vbus_reg)
+		return 1;
+
 	return 0;
 }
 
@@ -160,15 +212,39 @@ static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub,
 		hub->set_power(port, 0);
 }
 
+static int ohci_da8xx_regulator_event(struct notifier_block *nb,
+				unsigned long event, void *data)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci =
+				container_of(nb, struct da8xx_ohci_hcd, nb);
+
+	if (event & REGULATOR_EVENT_OVER_CURRENT) {
+		ocic_mask |= 1 << 1;
+		ohci_da8xx_set_power(da8xx_ohci->hcd, 0);
+	}
+
+	return 0;
+}
+
 static int ohci_da8xx_register_notify(struct usb_hcd *hcd)
 {
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
 	struct device *dev		= hcd->self.controller;
 	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+	int ret = 0;
+
+	if (hub && hub->ocic_notify) {
+		ret = hub->ocic_notify(ohci_da8xx_ocic_handler);
+	} else if (da8xx_ohci->vbus_reg) {
+		da8xx_ohci->nb.notifier_call = ohci_da8xx_regulator_event;
+		ret = devm_regulator_register_notifier(da8xx_ohci->vbus_reg,
+						&da8xx_ohci->nb);
+	}
 
-	if (hub && hub->ocic_notify)
-		return hub->ocic_notify(ohci_da8xx_ocic_handler);
+	if (ret)
+		dev_err(dev, "Failed to register notifier: %d\n", ret);
 
-	return 0;
+	return ret;
 }
 
 static void ohci_da8xx_unregister_notify(struct usb_hcd *hcd)
@@ -331,6 +407,7 @@ static int ohci_da8xx_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	da8xx_ohci = to_da8xx_ohci(hcd);
+	da8xx_ohci->hcd = hcd;
 
 	da8xx_ohci->usb11_clk = devm_clk_get(&pdev->dev, "usb11");
 	if (IS_ERR(da8xx_ohci->usb11_clk)) {
@@ -348,6 +425,19 @@ static int ohci_da8xx_probe(struct platform_device *pdev)
 		goto err;
 	}
 
+	da8xx_ohci->vbus_reg = devm_regulator_get_optional(&pdev->dev, "vbus");
+	if (IS_ERR(da8xx_ohci->vbus_reg)) {
+		error = PTR_ERR(da8xx_ohci->vbus_reg);
+		if (error == -ENODEV) {
+			da8xx_ohci->vbus_reg = NULL;
+		} else if (error == -EPROBE_DEFER) {
+			goto err;
+		} else {
+			dev_err(&pdev->dev, "Failed to get regulator\n");
+			goto err;
+		}
+	}
+
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	hcd->regs = devm_ioremap_resource(&pdev->dev, mem);
 	if (IS_ERR(hcd->regs)) {
-- 
2.9.3

[PATCHv7 4/5] USB: ohci: da8xx: Add devicetree bindings

[Axel Haslam]

This patch documents the device tree bindings required for
the ohci controller found in TI da8xx family of SoC's

Cc: robh+dt@kernel.org
Cc: mark.rutland@arm.com
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
 .../devicetree/bindings/usb/ohci-da8xx.txt         | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/ohci-da8xx.txt

diff --git a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt
new file mode 100644
index 0000000..2dc8f67
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt
@@ -0,0 +1,23 @@
+DA8XX USB OHCI controller
+
+Required properties:
+
+ - compatible: Should be "ti,da830-ohci"
+ - reg:        Should contain one register range i.e. start and length
+ - interrupts: Description of the interrupt line
+ - phys:       Phandle for the PHY device
+ - phy-names:  Should be "usb-phy"
+
+Optional properties:
+ - vbus-supply: phandle of regulator that controls vbus power / over-current
+
+Example:
+
+ohci: usb@0225000 {
+        compatible = "ti,da830-ohci";
+        reg = <0x225000 0x1000>;
+        interrupts = <59>;
+        phys = <&usb_phy 1>;
+        phy-names = "usb-phy";
+        vbus-supply = <&reg_usb_ohci>;
+};
-- 
2.9.3

[PATCHv7 4/5] USB: ohci: da8xx: Add devicetree bindings

[Axel Haslam]

This patch documents the device tree bindings required for
the ohci controller found in TI da8xx family of SoC's

Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: mark.rutland-5wv7dgnIgG8@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Axel Haslam <ahaslam-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
 .../devicetree/bindings/usb/ohci-da8xx.txt         | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/ohci-da8xx.txt

diff --git a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt
new file mode 100644
index 0000000..2dc8f67
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt
@@ -0,0 +1,23 @@
+DA8XX USB OHCI controller
+
+Required properties:
+
+ - compatible: Should be "ti,da830-ohci"
+ - reg:        Should contain one register range i.e. start and length
+ - interrupts: Description of the interrupt line
+ - phys:       Phandle for the PHY device
+ - phy-names:  Should be "usb-phy"
+
+Optional properties:
+ - vbus-supply: phandle of regulator that controls vbus power / over-current
+
+Example:
+
+ohci: usb@0225000 {
+        compatible = "ti,da830-ohci";
+        reg = <0x225000 0x1000>;
+        interrupts = <59>;
+        phys = <&usb_phy 1>;
+        phy-names = "usb-phy";
+        vbus-supply = <&reg_usb_ohci>;
+};
-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv7 5/5] USB: ohci: da8xx: Allow probing from DT

[Axel Haslam]

This adds the compatible string to the ohci driver
to be able to probe from DT

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
 drivers/usb/host/ohci-da8xx.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index 07366ae..1818206 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -394,6 +394,13 @@ static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 }
 
 /*-------------------------------------------------------------------------*/
+#ifdef CONFIG_OF
+static const struct of_device_id da8xx_ohci_ids[] = {
+	{ .compatible = "ti,da830-ohci" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, da8xx_ohci_ids);
+#endif
 
 static int ohci_da8xx_probe(struct platform_device *pdev)
 {
@@ -546,6 +553,7 @@ static struct platform_driver ohci_hcd_da8xx_driver = {
 #endif
 	.driver		= {
 		.name	= DRV_NAME,
+		.of_match_table = of_match_ptr(da8xx_ohci_ids),
 	},
 };
 
-- 
2.9.3