[PATCH v28 0/9] arm64: add kdump support

[PATCH v28 0/9] arm64: add kdump support

[AKASHI Takahiro]

This patch series adds kdump support on arm64.

To load a crash-dump kernel to the systems, a series of patches to
kexec-tools[1] are also needed. Please use the latest one, v4 [2].

To examine vmcore (/proc/vmcore) on a crash-dump kernel, you can use
  - crash utility (v7.1.6 or later) [3]

I validated this patchset on fast model.
The previous version, v27, was also:
Tested-by: Pratyush Anand <panand@redhat.com> (mustang and seattle)
Tested-by: James Morse <james.morse@arm.com> (Juno)

For your convenience, you can also find the patches:
https://git.linaro.org/people/takahiro.akashi/linux-aarch64.git arm64/kdump
https://git.linaro.org/people/takahiro.akashi/kexec-tools.git arm64/kdump


[1] https://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
[2] http://lists.infradead.org/pipermail/kexec/2016-November/017555.html
[3] https://github.com/crash-utility/crash.git


Changes for v28 (Nov 22, 2016)
  o rebased to Linux-v4.9-rc6
  o revamp patch #1 and merge memblock_cap_memory_range() with
    memblock_mem_limit_remove_map()

Changes for v27 (Nov 1, 2016)
  o rebased to Linux-v4.9-rc3
  o revert v26 change, i.e. revive "linux,usable-memory-range" property
    (patch #2/#3, updating patch #9)
  o minor fixes per review comments (patch #3/#4/#6/#8)
  o re-order patches and improve commit messages for readability

Changes for v26 (Sep 7, 2016):
  o Use /reserved-memory instead of "linux,usable-memory-range" property
    (dropping v25's patch#2 and #3, updating ex-patch#9.)

Changes for v25 (Aug 29, 2016):
  o Rebase to Linux-4.8-rc4
  o Use memremap() instead of ioremap_cache() [patch#5]

Changes for v24 (Aug 9, 2016):
  o Rebase to Linux-4.8-rc1
  o Update descriptions about newly added DT proerties

Changes for v23 (July 26, 2016):

  o Move memblock_reserve() to a single place in reserve_crashkernel()
  o Use  cpu_park_loop() in ipi_cpu_crash_stop()
  o Always enforce ARCH_LOW_ADDRESS_LIMIT to the memory range of crash kernel
  o Re-implement fdt_enforce_memory_region() to remove non-reserve regions
    (for ACPI) from usable memory at crash kernel

Changes for v22 (July 12, 2016):

  o Export "crashkernel-base" and "crashkernel-size" via device-tree,
    and add some descriptions about them in chosen.txt
  o Rename "usable-memory" to "usable-memory-range" to avoid inconsistency
    with powerpc's "usable-memory"
  o Make cosmetic changes regarding "ifdef" usage
  o Correct some wordings in kdump.txt

Changes for v21 (July 6, 2016):

  o Remove kexec patches.
  o Rebase to arm64's for-next/core (Linux-4.7-rc4 based).
  o Clarify the description about kvm in kdump.txt.

See the following link [4] for older changes:
[4]  http://lists.infradead.org/pipermail/linux-arm-kernel/2016-June/438780.html

AKASHI Takahiro (8):
  arm64: kdump: reserve memory for crash dump kernel
  memblock: add memblock_cap_memory_range()
  arm64: limit memory regions based on DT property, usable-memory-range
  arm64: kdump: implement machine_crash_shutdown()
  arm64: kdump: add kdump support
  arm64: kdump: add VMCOREINFO's for user-space coredump tools
  arm64: kdump: enable kdump in the arm64 defconfig
  arm64: kdump: update a kernel doc

James Morse (1):
  Documentation: dt: chosen properties for arm64 kdump

 Documentation/devicetree/bindings/chosen.txt |  45 ++++++
 Documentation/kdump/kdump.txt                |  16 ++-
 arch/arm64/Kconfig                           |  11 ++
 arch/arm64/configs/defconfig                 |   1 +
 arch/arm64/include/asm/hardirq.h             |   2 +-
 arch/arm64/include/asm/kexec.h               |  41 +++++-
 arch/arm64/include/asm/smp.h                 |   2 +
 arch/arm64/kernel/Makefile                   |   1 +
 arch/arm64/kernel/crash_dump.c               |  71 ++++++++++
 arch/arm64/kernel/machine_kexec.c            |  67 ++++++++-
 arch/arm64/kernel/setup.c                    |   7 +-
 arch/arm64/kernel/smp.c                      |  63 +++++++++
 arch/arm64/mm/init.c                         | 202 +++++++++++++++++++++++++++
 include/linux/memblock.h                     |   1 +
 mm/memblock.c                                |  28 ++++
 15 files changed, 551 insertions(+), 7 deletions(-)
 create mode 100644 arch/arm64/kernel/crash_dump.c

-- 
2.9.0


AKASHI Takahiro (8):
  memblock: add memblock_cap_memory_range()
  arm64: limit memory regions based on DT property, usable-memory-range
  arm64: kdump: reserve memory for crash dump kernel
  arm64: kdump: implement machine_crash_shutdown()
  arm64: kdump: add VMCOREINFO's for user-space tools
  arm64: kdump: provide /proc/vmcore file
  arm64: kdump: enable kdump in defconfig
  Documentation: kdump: describe arm64 port

James Morse (1):
  Documentation: dt: chosen properties for arm64 kdump

 Documentation/devicetree/bindings/chosen.txt |  50 +++++++
 Documentation/kdump/kdump.txt                |  16 ++-
 arch/arm64/Kconfig                           |  11 ++
 arch/arm64/configs/defconfig                 |   1 +
 arch/arm64/include/asm/hardirq.h             |   2 +-
 arch/arm64/include/asm/kexec.h               |  42 +++++-
 arch/arm64/include/asm/smp.h                 |   2 +
 arch/arm64/kernel/Makefile                   |   1 +
 arch/arm64/kernel/crash_dump.c               |  71 ++++++++++
 arch/arm64/kernel/machine_kexec.c            |  67 ++++++++-
 arch/arm64/kernel/setup.c                    |   7 +-
 arch/arm64/kernel/smp.c                      |  63 +++++++++
 arch/arm64/mm/init.c                         | 199 +++++++++++++++++++++++++++
 include/linux/memblock.h                     |   1 +
 mm/memblock.c                                |  44 ++++--
 15 files changed, 555 insertions(+), 22 deletions(-)
 create mode 100644 arch/arm64/kernel/crash_dump.c

-- 
2.10.0

[PATCH v28 0/9] arm64: add kdump support

[AKASHI Takahiro]

This patch series adds kdump support on arm64.

To load a crash-dump kernel to the systems, a series of patches to
kexec-tools[1] are also needed. Please use the latest one, v4 [2].

To examine vmcore (/proc/vmcore) on a crash-dump kernel, you can use
  - crash utility (v7.1.6 or later) [3]

I validated this patchset on fast model.
The previous version, v27, was also:
Tested-by: Pratyush Anand <panand@redhat.com> (mustang and seattle)
Tested-by: James Morse <james.morse@arm.com> (Juno)

For your convenience, you can also find the patches:
https://git.linaro.org/people/takahiro.akashi/linux-aarch64.git arm64/kdump
https://git.linaro.org/people/takahiro.akashi/kexec-tools.git arm64/kdump


[1] https://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
[2] http://lists.infradead.org/pipermail/kexec/2016-November/017555.html
[3] https://github.com/crash-utility/crash.git


Changes for v28 (Nov 22, 2016)
  o rebased to Linux-v4.9-rc6
  o revamp patch #1 and merge memblock_cap_memory_range() with
    memblock_mem_limit_remove_map()

Changes for v27 (Nov 1, 2016)
  o rebased to Linux-v4.9-rc3
  o revert v26 change, i.e. revive "linux,usable-memory-range" property
    (patch #2/#3, updating patch #9)
  o minor fixes per review comments (patch #3/#4/#6/#8)
  o re-order patches and improve commit messages for readability

Changes for v26 (Sep 7, 2016):
  o Use /reserved-memory instead of "linux,usable-memory-range" property
    (dropping v25's patch#2 and #3, updating ex-patch#9.)

Changes for v25 (Aug 29, 2016):
  o Rebase to Linux-4.8-rc4
  o Use memremap() instead of ioremap_cache() [patch#5]

Changes for v24 (Aug 9, 2016):
  o Rebase to Linux-4.8-rc1
  o Update descriptions about newly added DT proerties

Changes for v23 (July 26, 2016):

  o Move memblock_reserve() to a single place in reserve_crashkernel()
  o Use  cpu_park_loop() in ipi_cpu_crash_stop()
  o Always enforce ARCH_LOW_ADDRESS_LIMIT to the memory range of crash kernel
  o Re-implement fdt_enforce_memory_region() to remove non-reserve regions
    (for ACPI) from usable memory at crash kernel

Changes for v22 (July 12, 2016):

  o Export "crashkernel-base" and "crashkernel-size" via device-tree,
    and add some descriptions about them in chosen.txt
  o Rename "usable-memory" to "usable-memory-range" to avoid inconsistency
    with powerpc's "usable-memory"
  o Make cosmetic changes regarding "ifdef" usage
  o Correct some wordings in kdump.txt

Changes for v21 (July 6, 2016):

  o Remove kexec patches.
  o Rebase to arm64's for-next/core (Linux-4.7-rc4 based).
  o Clarify the description about kvm in kdump.txt.

See the following link [4] for older changes:
[4]  http://lists.infradead.org/pipermail/linux-arm-kernel/2016-June/438780.html

AKASHI Takahiro (8):
  arm64: kdump: reserve memory for crash dump kernel
  memblock: add memblock_cap_memory_range()
  arm64: limit memory regions based on DT property, usable-memory-range
  arm64: kdump: implement machine_crash_shutdown()
  arm64: kdump: add kdump support
  arm64: kdump: add VMCOREINFO's for user-space coredump tools
  arm64: kdump: enable kdump in the arm64 defconfig
  arm64: kdump: update a kernel doc

James Morse (1):
  Documentation: dt: chosen properties for arm64 kdump

 Documentation/devicetree/bindings/chosen.txt |  45 ++++++
 Documentation/kdump/kdump.txt                |  16 ++-
 arch/arm64/Kconfig                           |  11 ++
 arch/arm64/configs/defconfig                 |   1 +
 arch/arm64/include/asm/hardirq.h             |   2 +-
 arch/arm64/include/asm/kexec.h               |  41 +++++-
 arch/arm64/include/asm/smp.h                 |   2 +
 arch/arm64/kernel/Makefile                   |   1 +
 arch/arm64/kernel/crash_dump.c               |  71 ++++++++++
 arch/arm64/kernel/machine_kexec.c            |  67 ++++++++-
 arch/arm64/kernel/setup.c                    |   7 +-
 arch/arm64/kernel/smp.c                      |  63 +++++++++
 arch/arm64/mm/init.c                         | 202 +++++++++++++++++++++++++++
 include/linux/memblock.h                     |   1 +
 mm/memblock.c                                |  28 ++++
 15 files changed, 551 insertions(+), 7 deletions(-)
 create mode 100644 arch/arm64/kernel/crash_dump.c

-- 
2.9.0


AKASHI Takahiro (8):
  memblock: add memblock_cap_memory_range()
  arm64: limit memory regions based on DT property, usable-memory-range
  arm64: kdump: reserve memory for crash dump kernel
  arm64: kdump: implement machine_crash_shutdown()
  arm64: kdump: add VMCOREINFO's for user-space tools
  arm64: kdump: provide /proc/vmcore file
  arm64: kdump: enable kdump in defconfig
  Documentation: kdump: describe arm64 port

James Morse (1):
  Documentation: dt: chosen properties for arm64 kdump

 Documentation/devicetree/bindings/chosen.txt |  50 +++++++
 Documentation/kdump/kdump.txt                |  16 ++-
 arch/arm64/Kconfig                           |  11 ++
 arch/arm64/configs/defconfig                 |   1 +
 arch/arm64/include/asm/hardirq.h             |   2 +-
 arch/arm64/include/asm/kexec.h               |  42 +++++-
 arch/arm64/include/asm/smp.h                 |   2 +
 arch/arm64/kernel/Makefile                   |   1 +
 arch/arm64/kernel/crash_dump.c               |  71 ++++++++++
 arch/arm64/kernel/machine_kexec.c            |  67 ++++++++-
 arch/arm64/kernel/setup.c                    |   7 +-
 arch/arm64/kernel/smp.c                      |  63 +++++++++
 arch/arm64/mm/init.c                         | 199 +++++++++++++++++++++++++++
 include/linux/memblock.h                     |   1 +
 mm/memblock.c                                |  44 ++++--
 15 files changed, 555 insertions(+), 22 deletions(-)
 create mode 100644 arch/arm64/kernel/crash_dump.c

-- 
2.10.0


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

[PATCH v28 1/9] memblock: add memblock_cap_memory_range()

[AKASHI Takahiro]

Add memblock_cap_memory_range() which will remove all the memblock regions
except the memory range specified in the arguments. In addition, rework is
done on memblock_mem_limit_remove_map() to re-implement it using
memblock_cap_memory_range().

This function, like memblock_mem_limit_remove_map(), will not remove
memblocks with MEMMAP_NOMAP attribute as they may be mapped and accessed
later as "device memory."
See the commit a571d4eb55d8 ("mm/memblock.c: add new infrastructure to
address the mem limit issue").

This function is used, in a succeeding patch in the series of arm64 kdump
suuport, to limit the range of usable memory, or System RAM, on crash dump
kernel.
(Please note that "mem=" parameter is of little use for this purpose.)

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Cc: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 include/linux/memblock.h |  1 +
 mm/memblock.c            | 44 +++++++++++++++++++++++++++++---------------
 2 files changed, 30 insertions(+), 15 deletions(-)

diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index 5b759c9..fbfcacc 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -333,6 +333,7 @@ phys_addr_t memblock_mem_size(unsigned long limit_pfn);
 phys_addr_t memblock_start_of_DRAM(void);
 phys_addr_t memblock_end_of_DRAM(void);
 void memblock_enforce_memory_limit(phys_addr_t memory_limit);
+void memblock_cap_memory_range(phys_addr_t base, phys_addr_t size);
 void memblock_mem_limit_remove_map(phys_addr_t limit);
 bool memblock_is_memory(phys_addr_t addr);
 int memblock_is_map_memory(phys_addr_t addr);
diff --git a/mm/memblock.c b/mm/memblock.c
index 7608bc3..fea1688 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -1514,11 +1514,37 @@ void __init memblock_enforce_memory_limit(phys_addr_t limit)
 			      (phys_addr_t)ULLONG_MAX);
 }
 
+void __init memblock_cap_memory_range(phys_addr_t base, phys_addr_t size)
+{
+	int start_rgn, end_rgn;
+	int i, ret;
+
+	if (!size)
+		return;
+
+	ret = memblock_isolate_range(&memblock.memory, base, size,
+						&start_rgn, &end_rgn);
+	if (ret)
+		return;
+
+	/* remove all the MAP regions */
+	for (i = memblock.memory.cnt - 1; i >= end_rgn; i--)
+		if (!memblock_is_nomap(&memblock.memory.regions[i]))
+			memblock_remove_region(&memblock.memory, i);
+
+	for (i = start_rgn - 1; i >= 0; i--)
+		if (!memblock_is_nomap(&memblock.memory.regions[i]))
+			memblock_remove_region(&memblock.memory, i);
+
+	/* truncate the reserved regions */
+	memblock_remove_range(&memblock.reserved, 0, base);
+	memblock_remove_range(&memblock.reserved,
+			base + size, (phys_addr_t)ULLONG_MAX);
+}
+
 void __init memblock_mem_limit_remove_map(phys_addr_t limit)
 {
-	struct memblock_type *type = &memblock.memory;
 	phys_addr_t max_addr;
-	int i, ret, start_rgn, end_rgn;
 
 	if (!limit)
 		return;
@@ -1529,19 +1555,7 @@ void __init memblock_mem_limit_remove_map(phys_addr_t limit)
 	if (max_addr == (phys_addr_t)ULLONG_MAX)
 		return;
 
-	ret = memblock_isolate_range(type, max_addr, (phys_addr_t)ULLONG_MAX,
-				&start_rgn, &end_rgn);
-	if (ret)
-		return;
-
-	/* remove all the MAP regions above the limit */
-	for (i = end_rgn - 1; i >= start_rgn; i--) {
-		if (!memblock_is_nomap(&type->regions[i]))
-			memblock_remove_region(type, i);
-	}
-	/* truncate the reserved regions */
-	memblock_remove_range(&memblock.reserved, max_addr,
-			      (phys_addr_t)ULLONG_MAX);
+	memblock_cap_memory_range(0, max_addr);
 }
 
 static int __init_memblock memblock_search(struct memblock_type *type, phys_addr_t addr)
-- 
2.10.0

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH v28 1/9] memblock: add memblock_cap_memory_range()

[AKASHI Takahiro]

Add memblock_cap_memory_range() which will remove all the memblock regions
except the memory range specified in the arguments. In addition, rework is
done on memblock_mem_limit_remove_map() to re-implement it using
memblock_cap_memory_range().

This function, like memblock_mem_limit_remove_map(), will not remove
memblocks with MEMMAP_NOMAP attribute as they may be mapped and accessed
later as "device memory."
See the commit a571d4eb55d8 ("mm/memblock.c: add new infrastructure to
address the mem limit issue").

This function is used, in a succeeding patch in the series of arm64 kdump
suuport, to limit the range of usable memory, or System RAM, on crash dump
kernel.
(Please note that "mem=" parameter is of little use for this purpose.)

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Cc: linux-mm at kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 include/linux/memblock.h |  1 +
 mm/memblock.c            | 44 +++++++++++++++++++++++++++++---------------
 2 files changed, 30 insertions(+), 15 deletions(-)

diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index 5b759c9..fbfcacc 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -333,6 +333,7 @@ phys_addr_t memblock_mem_size(unsigned long limit_pfn);
 phys_addr_t memblock_start_of_DRAM(void);
 phys_addr_t memblock_end_of_DRAM(void);
 void memblock_enforce_memory_limit(phys_addr_t memory_limit);
+void memblock_cap_memory_range(phys_addr_t base, phys_addr_t size);
 void memblock_mem_limit_remove_map(phys_addr_t limit);
 bool memblock_is_memory(phys_addr_t addr);
 int memblock_is_map_memory(phys_addr_t addr);
diff --git a/mm/memblock.c b/mm/memblock.c
index 7608bc3..fea1688 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -1514,11 +1514,37 @@ void __init memblock_enforce_memory_limit(phys_addr_t limit)
 			      (phys_addr_t)ULLONG_MAX);
 }
 
+void __init memblock_cap_memory_range(phys_addr_t base, phys_addr_t size)
+{
+	int start_rgn, end_rgn;
+	int i, ret;
+
+	if (!size)
+		return;
+
+	ret = memblock_isolate_range(&memblock.memory, base, size,
+						&start_rgn, &end_rgn);
+	if (ret)
+		return;
+
+	/* remove all the MAP regions */
+	for (i = memblock.memory.cnt - 1; i >= end_rgn; i--)
+		if (!memblock_is_nomap(&memblock.memory.regions[i]))
+			memblock_remove_region(&memblock.memory, i);
+
+	for (i = start_rgn - 1; i >= 0; i--)
+		if (!memblock_is_nomap(&memblock.memory.regions[i]))
+			memblock_remove_region(&memblock.memory, i);
+
+	/* truncate the reserved regions */
+	memblock_remove_range(&memblock.reserved, 0, base);
+	memblock_remove_range(&memblock.reserved,
+			base + size, (phys_addr_t)ULLONG_MAX);
+}
+
 void __init memblock_mem_limit_remove_map(phys_addr_t limit)
 {
-	struct memblock_type *type = &memblock.memory;
 	phys_addr_t max_addr;
-	int i, ret, start_rgn, end_rgn;
 
 	if (!limit)
 		return;
@@ -1529,19 +1555,7 @@ void __init memblock_mem_limit_remove_map(phys_addr_t limit)
 	if (max_addr == (phys_addr_t)ULLONG_MAX)
 		return;
 
-	ret = memblock_isolate_range(type, max_addr, (phys_addr_t)ULLONG_MAX,
-				&start_rgn, &end_rgn);
-	if (ret)
-		return;
-
-	/* remove all the MAP regions above the limit */
-	for (i = end_rgn - 1; i >= start_rgn; i--) {
-		if (!memblock_is_nomap(&type->regions[i]))
-			memblock_remove_region(type, i);
-	}
-	/* truncate the reserved regions */
-	memblock_remove_range(&memblock.reserved, max_addr,
-			      (phys_addr_t)ULLONG_MAX);
+	memblock_cap_memory_range(0, max_addr);
 }
 
 static int __init_memblock memblock_search(struct memblock_type *type, phys_addr_t addr)
-- 
2.10.0

[PATCH v28 1/9] memblock: add memblock_cap_memory_range()

[AKASHI Takahiro]

Add memblock_cap_memory_range() which will remove all the memblock regions
except the memory range specified in the arguments. In addition, rework is
done on memblock_mem_limit_remove_map() to re-implement it using
memblock_cap_memory_range().

This function, like memblock_mem_limit_remove_map(), will not remove
memblocks with MEMMAP_NOMAP attribute as they may be mapped and accessed
later as "device memory."
See the commit a571d4eb55d8 ("mm/memblock.c: add new infrastructure to
address the mem limit issue").

This function is used, in a succeeding patch in the series of arm64 kdump
suuport, to limit the range of usable memory, or System RAM, on crash dump
kernel.
(Please note that "mem=" parameter is of little use for this purpose.)

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Cc: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 include/linux/memblock.h |  1 +
 mm/memblock.c            | 44 +++++++++++++++++++++++++++++---------------
 2 files changed, 30 insertions(+), 15 deletions(-)

diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index 5b759c9..fbfcacc 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -333,6 +333,7 @@ phys_addr_t memblock_mem_size(unsigned long limit_pfn);
 phys_addr_t memblock_start_of_DRAM(void);
 phys_addr_t memblock_end_of_DRAM(void);
 void memblock_enforce_memory_limit(phys_addr_t memory_limit);
+void memblock_cap_memory_range(phys_addr_t base, phys_addr_t size);
 void memblock_mem_limit_remove_map(phys_addr_t limit);
 bool memblock_is_memory(phys_addr_t addr);
 int memblock_is_map_memory(phys_addr_t addr);
diff --git a/mm/memblock.c b/mm/memblock.c
index 7608bc3..fea1688 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -1514,11 +1514,37 @@ void __init memblock_enforce_memory_limit(phys_addr_t limit)
 			      (phys_addr_t)ULLONG_MAX);
 }
 
+void __init memblock_cap_memory_range(phys_addr_t base, phys_addr_t size)
+{
+	int start_rgn, end_rgn;
+	int i, ret;
+
+	if (!size)
+		return;
+
+	ret = memblock_isolate_range(&memblock.memory, base, size,
+						&start_rgn, &end_rgn);
+	if (ret)
+		return;
+
+	/* remove all the MAP regions */
+	for (i = memblock.memory.cnt - 1; i >= end_rgn; i--)
+		if (!memblock_is_nomap(&memblock.memory.regions[i]))
+			memblock_remove_region(&memblock.memory, i);
+
+	for (i = start_rgn - 1; i >= 0; i--)
+		if (!memblock_is_nomap(&memblock.memory.regions[i]))
+			memblock_remove_region(&memblock.memory, i);
+
+	/* truncate the reserved regions */
+	memblock_remove_range(&memblock.reserved, 0, base);
+	memblock_remove_range(&memblock.reserved,
+			base + size, (phys_addr_t)ULLONG_MAX);
+}
+
 void __init memblock_mem_limit_remove_map(phys_addr_t limit)
 {
-	struct memblock_type *type = &memblock.memory;
 	phys_addr_t max_addr;
-	int i, ret, start_rgn, end_rgn;
 
 	if (!limit)
 		return;
@@ -1529,19 +1555,7 @@ void __init memblock_mem_limit_remove_map(phys_addr_t limit)
 	if (max_addr == (phys_addr_t)ULLONG_MAX)
 		return;
 
-	ret = memblock_isolate_range(type, max_addr, (phys_addr_t)ULLONG_MAX,
-				&start_rgn, &end_rgn);
-	if (ret)
-		return;
-
-	/* remove all the MAP regions above the limit */
-	for (i = end_rgn - 1; i >= start_rgn; i--) {
-		if (!memblock_is_nomap(&type->regions[i]))
-			memblock_remove_region(type, i);
-	}
-	/* truncate the reserved regions */
-	memblock_remove_range(&memblock.reserved, max_addr,
-			      (phys_addr_t)ULLONG_MAX);
+	memblock_cap_memory_range(0, max_addr);
 }
 
 static int __init_memblock memblock_search(struct memblock_type *type, phys_addr_t addr)
-- 
2.10.0


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

[PATCH v28 2/9] arm64: limit memory regions based on DT property, usable-memory-range

[AKASHI Takahiro]

Crash dump kernel utilizes only a subset of available memory as System RAM.
On arm64 kdump, This memory range is advertized to crash dump kernel via
a device-tree property under /chosen,
   linux,usable-memory-range = <BASE SIZE>

Crash dump kernel reads this property at boot time and calls
memblock_cap_memory_range() to limit usable memory ranges which are
described as entries in UEFI memory map table or "memory" nodes in
a device tree blob.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Geoff Levand <geoff@infradead.org>
---
 arch/arm64/mm/init.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 212c4d1..65f1241 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -187,10 +187,45 @@ static int __init early_mem(char *p)
 }
 early_param("mem", early_mem);
 
+static int __init early_init_dt_scan_usablemem(unsigned long node,
+		const char *uname, int depth, void *data)
+{
+	struct memblock_region *usablemem = (struct memblock_region *)data;
+	const __be32 *reg;
+	int len;
+
+	usablemem->size = 0;
+
+	if (depth != 1 || strcmp(uname, "chosen") != 0)
+		return 0;
+
+	reg = of_get_flat_dt_prop(node, "linux,usable-memory-range", &len);
+	if (!reg || (len < (dt_root_addr_cells + dt_root_size_cells)))
+		return 1;
+
+	usablemem->base = dt_mem_next_cell(dt_root_addr_cells, &reg);
+	usablemem->size = dt_mem_next_cell(dt_root_size_cells, &reg);
+
+	return 1;
+}
+
+static void __init fdt_enforce_memory_region(void)
+{
+	struct memblock_region reg;
+
+	of_scan_flat_dt(early_init_dt_scan_usablemem, &reg);
+
+	if (reg.size)
+		memblock_cap_memory_range(reg.base, reg.size);
+}
+
 void __init arm64_memblock_init(void)
 {
 	const s64 linear_region_size = -(s64)PAGE_OFFSET;
 
+	/* Handle linux,usable-memory-range property */
+	fdt_enforce_memory_region();
+
 	/*
 	 * Ensure that the linear region takes up exactly half of the kernel
 	 * virtual address space. This way, we can distinguish a linear address
-- 
2.10.0

[PATCH v28 2/9] arm64: limit memory regions based on DT property, usable-memory-range

[AKASHI Takahiro]

Crash dump kernel utilizes only a subset of available memory as System RAM.
On arm64 kdump, This memory range is advertized to crash dump kernel via
a device-tree property under /chosen,
   linux,usable-memory-range = <BASE SIZE>

Crash dump kernel reads this property at boot time and calls
memblock_cap_memory_range() to limit usable memory ranges which are
described as entries in UEFI memory map table or "memory" nodes in
a device tree blob.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Geoff Levand <geoff@infradead.org>
---
 arch/arm64/mm/init.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 212c4d1..65f1241 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -187,10 +187,45 @@ static int __init early_mem(char *p)
 }
 early_param("mem", early_mem);
 
+static int __init early_init_dt_scan_usablemem(unsigned long node,
+		const char *uname, int depth, void *data)
+{
+	struct memblock_region *usablemem = (struct memblock_region *)data;
+	const __be32 *reg;
+	int len;
+
+	usablemem->size = 0;
+
+	if (depth != 1 || strcmp(uname, "chosen") != 0)
+		return 0;
+
+	reg = of_get_flat_dt_prop(node, "linux,usable-memory-range", &len);
+	if (!reg || (len < (dt_root_addr_cells + dt_root_size_cells)))
+		return 1;
+
+	usablemem->base = dt_mem_next_cell(dt_root_addr_cells, &reg);
+	usablemem->size = dt_mem_next_cell(dt_root_size_cells, &reg);
+
+	return 1;
+}
+
+static void __init fdt_enforce_memory_region(void)
+{
+	struct memblock_region reg;
+
+	of_scan_flat_dt(early_init_dt_scan_usablemem, &reg);
+
+	if (reg.size)
+		memblock_cap_memory_range(reg.base, reg.size);
+}
+
 void __init arm64_memblock_init(void)
 {
 	const s64 linear_region_size = -(s64)PAGE_OFFSET;
 
+	/* Handle linux,usable-memory-range property */
+	fdt_enforce_memory_region();
+
 	/*
 	 * Ensure that the linear region takes up exactly half of the kernel
 	 * virtual address space. This way, we can distinguish a linear address
-- 
2.10.0


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

[PATCH v28 3/9] arm64: kdump: reserve memory for crash dump kernel

[AKASHI Takahiro]

"crashkernel=" kernel parameter specifies the size (and optionally
the start address) of the system ram used by crash dump kernel.
reserve_crashkernel() will allocate and reserve the memory at the startup
of primary kernel.

This memory range will be exported to userspace via:
	- an entry named "Crash kernel" in /proc/iomem, and
	- "linux,crashkernel-base" and "linux,crashkernel-size" under
	  /sys/firmware/devicetree/base/chosen

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Pratyush Anand <panand@redhat.com>
Reviewed-by: James Morse <james.morse@arm.com>
---
 arch/arm64/kernel/setup.c |   7 ++-
 arch/arm64/mm/init.c      | 110 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 116 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index f534f49..f012659 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -31,7 +31,6 @@
 #include <linux/screen_info.h>
 #include <linux/init.h>
 #include <linux/kexec.h>
-#include <linux/crash_dump.h>
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
@@ -225,6 +224,12 @@ static void __init request_standard_resources(void)
 		    kernel_data.end <= res->end)
 			request_resource(res, &kernel_data);
 	}
+
+#ifdef CONFIG_KEXEC_CORE
+	/* User space tools will find "Crash kernel" region in /proc/iomem. */
+	if (crashk_res.end)
+		insert_resource(&iomem_resource, &crashk_res);
+#endif
 }
 
 u64 __cpu_logical_map[NR_CPUS] = { [0 ... NR_CPUS-1] = INVALID_HWID };
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 65f1241..1d62bf7 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -30,12 +30,14 @@
 #include <linux/gfp.h>
 #include <linux/memblock.h>
 #include <linux/sort.h>
+#include <linux/of.h>
 #include <linux/of_fdt.h>
 #include <linux/dma-mapping.h>
 #include <linux/dma-contiguous.h>
 #include <linux/efi.h>
 #include <linux/swiotlb.h>
 #include <linux/vmalloc.h>
+#include <linux/kexec.h>
 
 #include <asm/boot.h>
 #include <asm/fixmap.h>
@@ -76,6 +78,111 @@ static int __init early_initrd(char *p)
 early_param("initrd", early_initrd);
 #endif
 
+#ifdef CONFIG_KEXEC_CORE
+static unsigned long long crash_size, crash_base;
+static struct property crash_base_prop = {
+	.name = "linux,crashkernel-base",
+	.length = sizeof(u64),
+	.value = &crash_base
+};
+static struct property crash_size_prop = {
+	.name = "linux,crashkernel-size",
+	.length = sizeof(u64),
+	.value = &crash_size,
+};
+
+static int __init export_crashkernel(void)
+{
+	struct device_node *node;
+	int ret;
+
+	if (!crash_size)
+		return 0;
+
+	/* Add /chosen/linux,crashkernel-* properties */
+	node = of_find_node_by_path("/chosen");
+	if (!node)
+		return -ENOENT;
+
+	/*
+	 * There might be existing crash kernel properties, but we can't
+	 * be sure what's in them, so remove them.
+	 */
+	of_remove_property(node, of_find_property(node,
+				"linux,crashkernel-base", NULL));
+	of_remove_property(node, of_find_property(node,
+				"linux,crashkernel-size", NULL));
+
+	ret = of_add_property(node, &crash_base_prop);
+	if (ret)
+		goto ret_err;
+
+	ret = of_add_property(node, &crash_size_prop);
+	if (ret)
+		goto ret_err;
+
+	return 0;
+
+ret_err:
+	pr_warn("Exporting crashkernel region to device tree failed\n");
+	return ret;
+}
+late_initcall(export_crashkernel);
+
+/*
+ * reserve_crashkernel() - reserves memory for crash kernel
+ *
+ * This function reserves memory area given in "crashkernel=" kernel command
+ * line parameter. The memory reserved is used by dump capture kernel when
+ * primary kernel is crashing.
+ */
+static void __init reserve_crashkernel(void)
+{
+	int ret;
+
+	ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
+				&crash_size, &crash_base);
+	/* no crashkernel= or invalid value specified */
+	if (ret || !crash_size)
+		return;
+
+	if (crash_base == 0) {
+		/* Current arm64 boot protocol requires 2MB alignment */
+		crash_base = memblock_find_in_range(0, ARCH_LOW_ADDRESS_LIMIT,
+				crash_size, SZ_2M);
+		if (crash_base == 0) {
+			pr_warn("Unable to allocate crashkernel (size:%llx)\n",
+				crash_size);
+			return;
+		}
+	} else {
+		/* User specifies base address explicitly. */
+		if (!memblock_is_region_memory(crash_base, crash_size) ||
+			memblock_is_region_reserved(crash_base, crash_size)) {
+			pr_warn("crashkernel has wrong address or size\n");
+			return;
+		}
+
+		if (!IS_ALIGNED(crash_base, SZ_2M)) {
+			pr_warn("crashkernel base address is not 2MB aligned\n");
+			return;
+		}
+	}
+	memblock_reserve(crash_base, crash_size);
+
+	pr_info("Reserving %lldMB of memory at %lldMB for crashkernel\n",
+		crash_size >> 20, crash_base >> 20);
+
+	crashk_res.start = crash_base;
+	crashk_res.end = crash_base + crash_size - 1;
+}
+#else
+static void __init reserve_crashkernel(void)
+{
+	;
+}
+#endif /* CONFIG_KEXEC_CORE */
+
 /*
  * Return the maximum physical address for ZONE_DMA (DMA_BIT_MASK(32)). It
  * currently assumes that for memory starting above 4G, 32-bit devices will
@@ -331,6 +438,9 @@ void __init arm64_memblock_init(void)
 		arm64_dma_phys_limit = max_zone_dma_phys();
 	else
 		arm64_dma_phys_limit = PHYS_MASK + 1;
+
+	reserve_crashkernel();
+
 	dma_contiguous_reserve(arm64_dma_phys_limit);
 
 	memblock_allow_resize();
-- 
2.10.0

[PATCH v28 3/9] arm64: kdump: reserve memory for crash dump kernel

[AKASHI Takahiro]

"crashkernel=" kernel parameter specifies the size (and optionally
the start address) of the system ram used by crash dump kernel.
reserve_crashkernel() will allocate and reserve the memory at the startup
of primary kernel.

This memory range will be exported to userspace via:
	- an entry named "Crash kernel" in /proc/iomem, and
	- "linux,crashkernel-base" and "linux,crashkernel-size" under
	  /sys/firmware/devicetree/base/chosen

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Pratyush Anand <panand@redhat.com>
Reviewed-by: James Morse <james.morse@arm.com>
---
 arch/arm64/kernel/setup.c |   7 ++-
 arch/arm64/mm/init.c      | 110 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 116 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index f534f49..f012659 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -31,7 +31,6 @@
 #include <linux/screen_info.h>
 #include <linux/init.h>
 #include <linux/kexec.h>
-#include <linux/crash_dump.h>
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
@@ -225,6 +224,12 @@ static void __init request_standard_resources(void)
 		    kernel_data.end <= res->end)
 			request_resource(res, &kernel_data);
 	}
+
+#ifdef CONFIG_KEXEC_CORE
+	/* User space tools will find "Crash kernel" region in /proc/iomem. */
+	if (crashk_res.end)
+		insert_resource(&iomem_resource, &crashk_res);
+#endif
 }
 
 u64 __cpu_logical_map[NR_CPUS] = { [0 ... NR_CPUS-1] = INVALID_HWID };
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 65f1241..1d62bf7 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -30,12 +30,14 @@
 #include <linux/gfp.h>
 #include <linux/memblock.h>
 #include <linux/sort.h>
+#include <linux/of.h>
 #include <linux/of_fdt.h>
 #include <linux/dma-mapping.h>
 #include <linux/dma-contiguous.h>
 #include <linux/efi.h>
 #include <linux/swiotlb.h>
 #include <linux/vmalloc.h>
+#include <linux/kexec.h>
 
 #include <asm/boot.h>
 #include <asm/fixmap.h>
@@ -76,6 +78,111 @@ static int __init early_initrd(char *p)
 early_param("initrd", early_initrd);
 #endif
 
+#ifdef CONFIG_KEXEC_CORE
+static unsigned long long crash_size, crash_base;
+static struct property crash_base_prop = {
+	.name = "linux,crashkernel-base",
+	.length = sizeof(u64),
+	.value = &crash_base
+};
+static struct property crash_size_prop = {
+	.name = "linux,crashkernel-size",
+	.length = sizeof(u64),
+	.value = &crash_size,
+};
+
+static int __init export_crashkernel(void)
+{
+	struct device_node *node;
+	int ret;
+
+	if (!crash_size)
+		return 0;
+
+	/* Add /chosen/linux,crashkernel-* properties */
+	node = of_find_node_by_path("/chosen");
+	if (!node)
+		return -ENOENT;
+
+	/*
+	 * There might be existing crash kernel properties, but we can't
+	 * be sure what's in them, so remove them.
+	 */
+	of_remove_property(node, of_find_property(node,
+				"linux,crashkernel-base", NULL));
+	of_remove_property(node, of_find_property(node,
+				"linux,crashkernel-size", NULL));
+
+	ret = of_add_property(node, &crash_base_prop);
+	if (ret)
+		goto ret_err;
+
+	ret = of_add_property(node, &crash_size_prop);
+	if (ret)
+		goto ret_err;
+
+	return 0;
+
+ret_err:
+	pr_warn("Exporting crashkernel region to device tree failed\n");
+	return ret;
+}
+late_initcall(export_crashkernel);
+
+/*
+ * reserve_crashkernel() - reserves memory for crash kernel
+ *
+ * This function reserves memory area given in "crashkernel=" kernel command
+ * line parameter. The memory reserved is used by dump capture kernel when
+ * primary kernel is crashing.
+ */
+static void __init reserve_crashkernel(void)
+{
+	int ret;
+
+	ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
+				&crash_size, &crash_base);
+	/* no crashkernel= or invalid value specified */
+	if (ret || !crash_size)
+		return;
+
+	if (crash_base == 0) {
+		/* Current arm64 boot protocol requires 2MB alignment */
+		crash_base = memblock_find_in_range(0, ARCH_LOW_ADDRESS_LIMIT,
+				crash_size, SZ_2M);
+		if (crash_base == 0) {
+			pr_warn("Unable to allocate crashkernel (size:%llx)\n",
+				crash_size);
+			return;
+		}
+	} else {
+		/* User specifies base address explicitly. */
+		if (!memblock_is_region_memory(crash_base, crash_size) ||
+			memblock_is_region_reserved(crash_base, crash_size)) {
+			pr_warn("crashkernel has wrong address or size\n");
+			return;
+		}
+
+		if (!IS_ALIGNED(crash_base, SZ_2M)) {
+			pr_warn("crashkernel base address is not 2MB aligned\n");
+			return;
+		}
+	}
+	memblock_reserve(crash_base, crash_size);
+
+	pr_info("Reserving %lldMB of memory at %lldMB for crashkernel\n",
+		crash_size >> 20, crash_base >> 20);
+
+	crashk_res.start = crash_base;
+	crashk_res.end = crash_base + crash_size - 1;
+}
+#else
+static void __init reserve_crashkernel(void)
+{
+	;
+}
+#endif /* CONFIG_KEXEC_CORE */
+
 /*
  * Return the maximum physical address for ZONE_DMA (DMA_BIT_MASK(32)). It
  * currently assumes that for memory starting above 4G, 32-bit devices will
@@ -331,6 +438,9 @@ void __init arm64_memblock_init(void)
 		arm64_dma_phys_limit = max_zone_dma_phys();
 	else
 		arm64_dma_phys_limit = PHYS_MASK + 1;
+
+	reserve_crashkernel();
+
 	dma_contiguous_reserve(arm64_dma_phys_limit);
 
 	memblock_allow_resize();
-- 
2.10.0


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

[PATCH v28 4/9] arm64: kdump: implement machine_crash_shutdown()

[AKASHI Takahiro]

Primary kernel calls machine_crash_shutdown() to shut down non-boot cpus
and save registers' status in per-cpu ELF notes before starting crash
dump kernel. See kernel_kexec().
Even if not all secondary cpus have shut down, we do kdump anyway.

As we don't have to make non-boot(crashed) cpus offline (to preserve
correct status of cpus at crash dump) before shutting down, this patch
also adds a variant of smp_send_stop().

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: James Morse <james.morse@arm.com>
---
 arch/arm64/include/asm/hardirq.h  |  2 +-
 arch/arm64/include/asm/kexec.h    | 42 +++++++++++++++++++++++++-
 arch/arm64/include/asm/smp.h      |  2 ++
 arch/arm64/kernel/machine_kexec.c | 56 ++++++++++++++++++++++++++++++++--
 arch/arm64/kernel/smp.c           | 63 +++++++++++++++++++++++++++++++++++++++
 5 files changed, 160 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/include/asm/hardirq.h b/arch/arm64/include/asm/hardirq.h
index 8740297..1473fc2 100644
--- a/arch/arm64/include/asm/hardirq.h
+++ b/arch/arm64/include/asm/hardirq.h
@@ -20,7 +20,7 @@
 #include <linux/threads.h>
 #include <asm/irq.h>
 
-#define NR_IPI	6
+#define NR_IPI	7
 
 typedef struct {
 	unsigned int __softirq_pending;
diff --git a/arch/arm64/include/asm/kexec.h b/arch/arm64/include/asm/kexec.h
index 04744dc..b5168e8 100644
--- a/arch/arm64/include/asm/kexec.h
+++ b/arch/arm64/include/asm/kexec.h
@@ -40,7 +40,47 @@
 static inline void crash_setup_regs(struct pt_regs *newregs,
 				    struct pt_regs *oldregs)
 {
-	/* Empty routine needed to avoid build errors. */
+	if (oldregs) {
+		memcpy(newregs, oldregs, sizeof(*newregs));
+	} else {
+		u64 tmp1, tmp2;
+
+		__asm__ __volatile__ (
+			"stp	 x0,   x1, [%2, #16 *  0]\n"
+			"stp	 x2,   x3, [%2, #16 *  1]\n"
+			"stp	 x4,   x5, [%2, #16 *  2]\n"
+			"stp	 x6,   x7, [%2, #16 *  3]\n"
+			"stp	 x8,   x9, [%2, #16 *  4]\n"
+			"stp	x10,  x11, [%2, #16 *  5]\n"
+			"stp	x12,  x13, [%2, #16 *  6]\n"
+			"stp	x14,  x15, [%2, #16 *  7]\n"
+			"stp	x16,  x17, [%2, #16 *  8]\n"
+			"stp	x18,  x19, [%2, #16 *  9]\n"
+			"stp	x20,  x21, [%2, #16 * 10]\n"
+			"stp	x22,  x23, [%2, #16 * 11]\n"
+			"stp	x24,  x25, [%2, #16 * 12]\n"
+			"stp	x26,  x27, [%2, #16 * 13]\n"
+			"stp	x28,  x29, [%2, #16 * 14]\n"
+			"mov	 %0,  sp\n"
+			"stp	x30,  %0,  [%2, #16 * 15]\n"
+
+			"/* faked current PSTATE */\n"
+			"mrs	 %0, CurrentEL\n"
+			"mrs	 %1, SPSEL\n"
+			"orr	 %0, %0, %1\n"
+			"mrs	 %1, DAIF\n"
+			"orr	 %0, %0, %1\n"
+			"mrs	 %1, NZCV\n"
+			"orr	 %0, %0, %1\n"
+			/* pc */
+			"adr	 %1, 1f\n"
+		"1:\n"
+			"stp	 %1, %0,   [%2, #16 * 16]\n"
+			: "+r" (tmp1), "+r" (tmp2)
+			: "r" (newregs)
+			: "memory"
+		);
+	}
 }
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/arm64/include/asm/smp.h b/arch/arm64/include/asm/smp.h
index 0226447..6b0f2c7 100644
--- a/arch/arm64/include/asm/smp.h
+++ b/arch/arm64/include/asm/smp.h
@@ -136,6 +136,8 @@ static inline void cpu_panic_kernel(void)
  */
 bool cpus_are_stuck_in_kernel(void);
 
+extern void smp_send_crash_stop(void);
+
 #endif /* ifndef __ASSEMBLY__ */
 
 #endif /* ifndef __ASM_SMP_H */
diff --git a/arch/arm64/kernel/machine_kexec.c b/arch/arm64/kernel/machine_kexec.c
index bc96c8a..c60346d 100644
--- a/arch/arm64/kernel/machine_kexec.c
+++ b/arch/arm64/kernel/machine_kexec.c
@@ -9,6 +9,9 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
 #include <linux/kexec.h>
 #include <linux/smp.h>
 
@@ -22,6 +25,7 @@
 extern const unsigned char arm64_relocate_new_kernel[];
 extern const unsigned long arm64_relocate_new_kernel_size;
 
+static bool in_crash_kexec;
 static unsigned long kimage_start;
 
 /**
@@ -148,7 +152,8 @@ void machine_kexec(struct kimage *kimage)
 	/*
 	 * New cpus may have become stuck_in_kernel after we loaded the image.
 	 */
-	BUG_ON(cpus_are_stuck_in_kernel() || (num_online_cpus() > 1));
+	BUG_ON((cpus_are_stuck_in_kernel() || (num_online_cpus() > 1)) &&
+			!WARN_ON(in_crash_kexec));
 
 	reboot_code_buffer_phys = page_to_phys(kimage->control_code_page);
 	reboot_code_buffer = phys_to_virt(reboot_code_buffer_phys);
@@ -200,13 +205,58 @@ void machine_kexec(struct kimage *kimage)
 	 * relocation is complete.
 	 */
 
-	cpu_soft_restart(1, reboot_code_buffer_phys, kimage->head,
+	cpu_soft_restart(!in_crash_kexec, reboot_code_buffer_phys, kimage->head,
 		kimage_start, 0);
 
 	BUG(); /* Should never get here. */
 }
 
+static void machine_kexec_mask_interrupts(void)
+{
+	unsigned int i;
+	struct irq_desc *desc;
+
+	for_each_irq_desc(i, desc) {
+		struct irq_chip *chip;
+		int ret;
+
+		chip = irq_desc_get_chip(desc);
+		if (!chip)
+			continue;
+
+		/*
+		 * First try to remove the active state. If this
+		 * fails, try to EOI the interrupt.
+		 */
+		ret = irq_set_irqchip_state(i, IRQCHIP_STATE_ACTIVE, false);
+
+		if (ret && irqd_irq_inprogress(&desc->irq_data) &&
+		    chip->irq_eoi)
+			chip->irq_eoi(&desc->irq_data);
+
+		if (chip->irq_mask)
+			chip->irq_mask(&desc->irq_data);
+
+		if (chip->irq_disable && !irqd_irq_disabled(&desc->irq_data))
+			chip->irq_disable(&desc->irq_data);
+	}
+}
+
+/**
+ * machine_crash_shutdown - shutdown non-crashing cpus and save registers
+ */
 void machine_crash_shutdown(struct pt_regs *regs)
 {
-	/* Empty routine needed to avoid build errors. */
+	local_irq_disable();
+
+	in_crash_kexec = true;
+
+	/* shutdown non-crashing cpus */
+	smp_send_crash_stop();
+
+	/* for crashing cpu */
+	crash_save_cpu(regs, smp_processor_id());
+	machine_kexec_mask_interrupts();
+
+	pr_info("Starting crashdump kernel...\n");
 }
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 8507703..8f8fd3ad 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -37,6 +37,7 @@
 #include <linux/completion.h>
 #include <linux/of.h>
 #include <linux/irq_work.h>
+#include <linux/kexec.h>
 
 #include <asm/alternative.h>
 #include <asm/atomic.h>
@@ -71,6 +72,7 @@ enum ipi_msg_type {
 	IPI_RESCHEDULE,
 	IPI_CALL_FUNC,
 	IPI_CPU_STOP,
+	IPI_CPU_CRASH_STOP,
 	IPI_TIMER,
 	IPI_IRQ_WORK,
 	IPI_WAKEUP
@@ -745,6 +747,7 @@ static const char *ipi_types[NR_IPI] __tracepoint_string = {
 	S(IPI_RESCHEDULE, "Rescheduling interrupts"),
 	S(IPI_CALL_FUNC, "Function call interrupts"),
 	S(IPI_CPU_STOP, "CPU stop interrupts"),
+	S(IPI_CPU_CRASH_STOP, "CPU stop (for crash dump) interrupts"),
 	S(IPI_TIMER, "Timer broadcast interrupts"),
 	S(IPI_IRQ_WORK, "IRQ work interrupts"),
 	S(IPI_WAKEUP, "CPU wake-up interrupts"),
@@ -819,6 +822,29 @@ static void ipi_cpu_stop(unsigned int cpu)
 		cpu_relax();
 }
 
+#ifdef CONFIG_KEXEC_CORE
+static atomic_t waiting_for_crash_ipi;
+#endif
+
+static void ipi_cpu_crash_stop(unsigned int cpu, struct pt_regs *regs)
+{
+#ifdef CONFIG_KEXEC_CORE
+	crash_save_cpu(regs, cpu);
+
+	atomic_dec(&waiting_for_crash_ipi);
+
+	local_irq_disable();
+
+#ifdef CONFIG_HOTPLUG_CPU
+	if (cpu_ops[cpu]->cpu_die)
+		cpu_ops[cpu]->cpu_die(cpu);
+#endif
+
+	/* just in case */
+	cpu_park_loop();
+#endif
+}
+
 /*
  * Main handler for inter-processor interrupts
  */
@@ -849,6 +875,15 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 		irq_exit();
 		break;
 
+	case IPI_CPU_CRASH_STOP:
+		if (IS_ENABLED(CONFIG_KEXEC_CORE)) {
+			irq_enter();
+			ipi_cpu_crash_stop(cpu, regs);
+
+			unreachable();
+		}
+		break;
+
 #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
 	case IPI_TIMER:
 		irq_enter();
@@ -921,6 +956,34 @@ void smp_send_stop(void)
 			   cpumask_pr_args(cpu_online_mask));
 }
 
+#ifdef CONFIG_KEXEC_CORE
+void smp_send_crash_stop(void)
+{
+	cpumask_t mask;
+	unsigned long timeout;
+
+	if (num_online_cpus() == 1)
+		return;
+
+	cpumask_copy(&mask, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), &mask);
+
+	atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
+
+	pr_crit("SMP: stopping secondary CPUs\n");
+	smp_cross_call(&mask, IPI_CPU_CRASH_STOP);
+
+	/* Wait up to one second for other CPUs to stop */
+	timeout = USEC_PER_SEC;
+	while ((atomic_read(&waiting_for_crash_ipi) > 0) && timeout--)
+		udelay(1);
+
+	if (atomic_read(&waiting_for_crash_ipi) > 0)
+		pr_warning("SMP: failed to stop secondary CPUs %*pbl\n",
+			   cpumask_pr_args(cpu_online_mask));
+}
+#endif
+
 /*
  * not supported here
  */
-- 
2.10.0

[PATCH v28 4/9] arm64: kdump: implement machine_crash_shutdown()

[AKASHI Takahiro]

Primary kernel calls machine_crash_shutdown() to shut down non-boot cpus
and save registers' status in per-cpu ELF notes before starting crash
dump kernel. See kernel_kexec().
Even if not all secondary cpus have shut down, we do kdump anyway.

As we don't have to make non-boot(crashed) cpus offline (to preserve
correct status of cpus at crash dump) before shutting down, this patch
also adds a variant of smp_send_stop().

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: James Morse <james.morse@arm.com>
---
 arch/arm64/include/asm/hardirq.h  |  2 +-
 arch/arm64/include/asm/kexec.h    | 42 +++++++++++++++++++++++++-
 arch/arm64/include/asm/smp.h      |  2 ++
 arch/arm64/kernel/machine_kexec.c | 56 ++++++++++++++++++++++++++++++++--
 arch/arm64/kernel/smp.c           | 63 +++++++++++++++++++++++++++++++++++++++
 5 files changed, 160 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/include/asm/hardirq.h b/arch/arm64/include/asm/hardirq.h
index 8740297..1473fc2 100644
--- a/arch/arm64/include/asm/hardirq.h
+++ b/arch/arm64/include/asm/hardirq.h
@@ -20,7 +20,7 @@
 #include <linux/threads.h>
 #include <asm/irq.h>
 
-#define NR_IPI	6
+#define NR_IPI	7
 
 typedef struct {
 	unsigned int __softirq_pending;
diff --git a/arch/arm64/include/asm/kexec.h b/arch/arm64/include/asm/kexec.h
index 04744dc..b5168e8 100644
--- a/arch/arm64/include/asm/kexec.h
+++ b/arch/arm64/include/asm/kexec.h
@@ -40,7 +40,47 @@
 static inline void crash_setup_regs(struct pt_regs *newregs,
 				    struct pt_regs *oldregs)
 {
-	/* Empty routine needed to avoid build errors. */
+	if (oldregs) {
+		memcpy(newregs, oldregs, sizeof(*newregs));
+	} else {
+		u64 tmp1, tmp2;
+
+		__asm__ __volatile__ (
+			"stp	 x0,   x1, [%2, #16 *  0]\n"
+			"stp	 x2,   x3, [%2, #16 *  1]\n"
+			"stp	 x4,   x5, [%2, #16 *  2]\n"
+			"stp	 x6,   x7, [%2, #16 *  3]\n"
+			"stp	 x8,   x9, [%2, #16 *  4]\n"
+			"stp	x10,  x11, [%2, #16 *  5]\n"
+			"stp	x12,  x13, [%2, #16 *  6]\n"
+			"stp	x14,  x15, [%2, #16 *  7]\n"
+			"stp	x16,  x17, [%2, #16 *  8]\n"
+			"stp	x18,  x19, [%2, #16 *  9]\n"
+			"stp	x20,  x21, [%2, #16 * 10]\n"
+			"stp	x22,  x23, [%2, #16 * 11]\n"
+			"stp	x24,  x25, [%2, #16 * 12]\n"
+			"stp	x26,  x27, [%2, #16 * 13]\n"
+			"stp	x28,  x29, [%2, #16 * 14]\n"
+			"mov	 %0,  sp\n"
+			"stp	x30,  %0,  [%2, #16 * 15]\n"
+
+			"/* faked current PSTATE */\n"
+			"mrs	 %0, CurrentEL\n"
+			"mrs	 %1, SPSEL\n"
+			"orr	 %0, %0, %1\n"
+			"mrs	 %1, DAIF\n"
+			"orr	 %0, %0, %1\n"
+			"mrs	 %1, NZCV\n"
+			"orr	 %0, %0, %1\n"
+			/* pc */
+			"adr	 %1, 1f\n"
+		"1:\n"
+			"stp	 %1, %0,   [%2, #16 * 16]\n"
+			: "+r" (tmp1), "+r" (tmp2)
+			: "r" (newregs)
+			: "memory"
+		);
+	}
 }
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/arm64/include/asm/smp.h b/arch/arm64/include/asm/smp.h
index 0226447..6b0f2c7 100644
--- a/arch/arm64/include/asm/smp.h
+++ b/arch/arm64/include/asm/smp.h
@@ -136,6 +136,8 @@ static inline void cpu_panic_kernel(void)
  */
 bool cpus_are_stuck_in_kernel(void);
 
+extern void smp_send_crash_stop(void);
+
 #endif /* ifndef __ASSEMBLY__ */
 
 #endif /* ifndef __ASM_SMP_H */
diff --git a/arch/arm64/kernel/machine_kexec.c b/arch/arm64/kernel/machine_kexec.c
index bc96c8a..c60346d 100644
--- a/arch/arm64/kernel/machine_kexec.c
+++ b/arch/arm64/kernel/machine_kexec.c
@@ -9,6 +9,9 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
 #include <linux/kexec.h>
 #include <linux/smp.h>
 
@@ -22,6 +25,7 @@
 extern const unsigned char arm64_relocate_new_kernel[];
 extern const unsigned long arm64_relocate_new_kernel_size;
 
+static bool in_crash_kexec;
 static unsigned long kimage_start;
 
 /**
@@ -148,7 +152,8 @@ void machine_kexec(struct kimage *kimage)
 	/*
 	 * New cpus may have become stuck_in_kernel after we loaded the image.
 	 */
-	BUG_ON(cpus_are_stuck_in_kernel() || (num_online_cpus() > 1));
+	BUG_ON((cpus_are_stuck_in_kernel() || (num_online_cpus() > 1)) &&
+			!WARN_ON(in_crash_kexec));
 
 	reboot_code_buffer_phys = page_to_phys(kimage->control_code_page);
 	reboot_code_buffer = phys_to_virt(reboot_code_buffer_phys);
@@ -200,13 +205,58 @@ void machine_kexec(struct kimage *kimage)
 	 * relocation is complete.
 	 */
 
-	cpu_soft_restart(1, reboot_code_buffer_phys, kimage->head,
+	cpu_soft_restart(!in_crash_kexec, reboot_code_buffer_phys, kimage->head,
 		kimage_start, 0);
 
 	BUG(); /* Should never get here. */
 }
 
+static void machine_kexec_mask_interrupts(void)
+{
+	unsigned int i;
+	struct irq_desc *desc;
+
+	for_each_irq_desc(i, desc) {
+		struct irq_chip *chip;
+		int ret;
+
+		chip = irq_desc_get_chip(desc);
+		if (!chip)
+			continue;
+
+		/*
+		 * First try to remove the active state. If this
+		 * fails, try to EOI the interrupt.
+		 */
+		ret = irq_set_irqchip_state(i, IRQCHIP_STATE_ACTIVE, false);
+
+		if (ret && irqd_irq_inprogress(&desc->irq_data) &&
+		    chip->irq_eoi)
+			chip->irq_eoi(&desc->irq_data);
+
+		if (chip->irq_mask)
+			chip->irq_mask(&desc->irq_data);
+
+		if (chip->irq_disable && !irqd_irq_disabled(&desc->irq_data))
+			chip->irq_disable(&desc->irq_data);
+	}
+}
+
+/**
+ * machine_crash_shutdown - shutdown non-crashing cpus and save registers
+ */
 void machine_crash_shutdown(struct pt_regs *regs)
 {
-	/* Empty routine needed to avoid build errors. */
+	local_irq_disable();
+
+	in_crash_kexec = true;
+
+	/* shutdown non-crashing cpus */
+	smp_send_crash_stop();
+
+	/* for crashing cpu */
+	crash_save_cpu(regs, smp_processor_id());
+	machine_kexec_mask_interrupts();
+
+	pr_info("Starting crashdump kernel...\n");
 }
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 8507703..8f8fd3ad 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -37,6 +37,7 @@
 #include <linux/completion.h>
 #include <linux/of.h>
 #include <linux/irq_work.h>
+#include <linux/kexec.h>
 
 #include <asm/alternative.h>
 #include <asm/atomic.h>
@@ -71,6 +72,7 @@ enum ipi_msg_type {
 	IPI_RESCHEDULE,
 	IPI_CALL_FUNC,
 	IPI_CPU_STOP,
+	IPI_CPU_CRASH_STOP,
 	IPI_TIMER,
 	IPI_IRQ_WORK,
 	IPI_WAKEUP
@@ -745,6 +747,7 @@ static const char *ipi_types[NR_IPI] __tracepoint_string = {
 	S(IPI_RESCHEDULE, "Rescheduling interrupts"),
 	S(IPI_CALL_FUNC, "Function call interrupts"),
 	S(IPI_CPU_STOP, "CPU stop interrupts"),
+	S(IPI_CPU_CRASH_STOP, "CPU stop (for crash dump) interrupts"),
 	S(IPI_TIMER, "Timer broadcast interrupts"),
 	S(IPI_IRQ_WORK, "IRQ work interrupts"),
 	S(IPI_WAKEUP, "CPU wake-up interrupts"),
@@ -819,6 +822,29 @@ static void ipi_cpu_stop(unsigned int cpu)
 		cpu_relax();
 }
 
+#ifdef CONFIG_KEXEC_CORE
+static atomic_t waiting_for_crash_ipi;
+#endif
+
+static void ipi_cpu_crash_stop(unsigned int cpu, struct pt_regs *regs)
+{
+#ifdef CONFIG_KEXEC_CORE
+	crash_save_cpu(regs, cpu);
+
+	atomic_dec(&waiting_for_crash_ipi);
+
+	local_irq_disable();
+
+#ifdef CONFIG_HOTPLUG_CPU
+	if (cpu_ops[cpu]->cpu_die)
+		cpu_ops[cpu]->cpu_die(cpu);
+#endif
+
+	/* just in case */
+	cpu_park_loop();
+#endif
+}
+
 /*
  * Main handler for inter-processor interrupts
  */
@@ -849,6 +875,15 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 		irq_exit();
 		break;
 
+	case IPI_CPU_CRASH_STOP:
+		if (IS_ENABLED(CONFIG_KEXEC_CORE)) {
+			irq_enter();
+			ipi_cpu_crash_stop(cpu, regs);
+
+			unreachable();
+		}
+		break;
+
 #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
 	case IPI_TIMER:
 		irq_enter();
@@ -921,6 +956,34 @@ void smp_send_stop(void)
 			   cpumask_pr_args(cpu_online_mask));
 }
 
+#ifdef CONFIG_KEXEC_CORE
+void smp_send_crash_stop(void)
+{
+	cpumask_t mask;
+	unsigned long timeout;
+
+	if (num_online_cpus() == 1)
+		return;
+
+	cpumask_copy(&mask, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), &mask);
+
+	atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
+
+	pr_crit("SMP: stopping secondary CPUs\n");
+	smp_cross_call(&mask, IPI_CPU_CRASH_STOP);
+
+	/* Wait up to one second for other CPUs to stop */
+	timeout = USEC_PER_SEC;
+	while ((atomic_read(&waiting_for_crash_ipi) > 0) && timeout--)
+		udelay(1);
+
+	if (atomic_read(&waiting_for_crash_ipi) > 0)
+		pr_warning("SMP: failed to stop secondary CPUs %*pbl\n",
+			   cpumask_pr_args(cpu_online_mask));
+}
+#endif
+
 /*
  * not supported here
  */
-- 
2.10.0


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

[PATCH v28 5/9] arm64: kdump: add VMCOREINFO's for user-space tools

[AKASHI Takahiro]

In addition to common VMCOREINFO's defined in
crash_save_vmcoreinfo_init(), we need to know, for crash utility,
  - kimage_voffset
  - PHYS_OFFSET
to examine the contents of a dump file (/proc/vmcore) correctly
due to the introduction of KASLR (CONFIG_RANDOMIZE_BASE) in v4.6.

  - VA_BITS
is also required for makedumpfile command.

arch_crash_save_vmcoreinfo() appends them to the dump file.
More VMCOREINFO's may be added later.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: James Morse <james.morse@arm.com>
---
 arch/arm64/kernel/machine_kexec.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/kernel/machine_kexec.c b/arch/arm64/kernel/machine_kexec.c
index c60346d..994fe0b 100644
--- a/arch/arm64/kernel/machine_kexec.c
+++ b/arch/arm64/kernel/machine_kexec.c
@@ -17,6 +17,7 @@
 
 #include <asm/cacheflush.h>
 #include <asm/cpu_ops.h>
+#include <asm/memory.h>
 #include <asm/mmu_context.h>
 
 #include "cpu-reset.h"
@@ -260,3 +261,13 @@ void machine_crash_shutdown(struct pt_regs *regs)
 
 	pr_info("Starting crashdump kernel...\n");
 }
+
+void arch_crash_save_vmcoreinfo(void)
+{
+	VMCOREINFO_NUMBER(VA_BITS);
+	/* Please note VMCOREINFO_NUMBER() uses "%d", not "%x" */
+	vmcoreinfo_append_str("NUMBER(kimage_voffset)=0x%llx\n",
+						kimage_voffset);
+	vmcoreinfo_append_str("NUMBER(PHYS_OFFSET)=0x%llx\n",
+						PHYS_OFFSET);
+}
-- 
2.10.0

[PATCH v28 5/9] arm64: kdump: add VMCOREINFO's for user-space tools

[AKASHI Takahiro]

In addition to common VMCOREINFO's defined in
crash_save_vmcoreinfo_init(), we need to know, for crash utility,
  - kimage_voffset
  - PHYS_OFFSET
to examine the contents of a dump file (/proc/vmcore) correctly
due to the introduction of KASLR (CONFIG_RANDOMIZE_BASE) in v4.6.

  - VA_BITS
is also required for makedumpfile command.

arch_crash_save_vmcoreinfo() appends them to the dump file.
More VMCOREINFO's may be added later.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: James Morse <james.morse@arm.com>
---
 arch/arm64/kernel/machine_kexec.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/kernel/machine_kexec.c b/arch/arm64/kernel/machine_kexec.c
index c60346d..994fe0b 100644
--- a/arch/arm64/kernel/machine_kexec.c
+++ b/arch/arm64/kernel/machine_kexec.c
@@ -17,6 +17,7 @@
 
 #include <asm/cacheflush.h>
 #include <asm/cpu_ops.h>
+#include <asm/memory.h>
 #include <asm/mmu_context.h>
 
 #include "cpu-reset.h"
@@ -260,3 +261,13 @@ void machine_crash_shutdown(struct pt_regs *regs)
 
 	pr_info("Starting crashdump kernel...\n");
 }
+
+void arch_crash_save_vmcoreinfo(void)
+{
+	VMCOREINFO_NUMBER(VA_BITS);
+	/* Please note VMCOREINFO_NUMBER() uses "%d", not "%x" */
+	vmcoreinfo_append_str("NUMBER(kimage_voffset)=0x%llx\n",
+						kimage_voffset);
+	vmcoreinfo_append_str("NUMBER(PHYS_OFFSET)=0x%llx\n",
+						PHYS_OFFSET);
+}
-- 
2.10.0


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

[PATCH v28 6/9] arm64: kdump: provide /proc/vmcore file

[AKASHI Takahiro]

Add arch-specific functions to provide a dump file, /proc/vmcore.

This file is in ELF format and its ELF header needs to be prepared by
userspace tools, like kexec-tools, in adance. The primary kernel is
responsible to allocate the region with reserve_elfcorehdr() at boot time
and advertize its location to crash dump kernel via a new device-tree
property, "linux,elfcorehdr".

Then crash dump kernel will access the primary kernel's memory with
copy_oldmem_page(), which feeds the data page-by-page by ioremap'ing it
since it does not reside in linear mapping on crash dump kernel.

We also need our own elfcorehdr_read() here since the header is placed
within crash dump kernel's usable memory.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: James Morse <james.morse@arm.com>
---
 arch/arm64/Kconfig             | 11 +++++++
 arch/arm64/kernel/Makefile     |  1 +
 arch/arm64/kernel/crash_dump.c | 71 ++++++++++++++++++++++++++++++++++++++++++
 arch/arm64/mm/init.c           | 54 ++++++++++++++++++++++++++++++++
 4 files changed, 137 insertions(+)
 create mode 100644 arch/arm64/kernel/crash_dump.c

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 969ef88..399f84a 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -688,6 +688,17 @@ config KEXEC
 	  but it is independent of the system firmware.   And like a reboot
 	  you can start any kernel with it, not just Linux.
 
+config CRASH_DUMP
+	bool "Build kdump crash kernel"
+	help
+	  Generate crash dump after being started by kexec. This should
+	  be normally only set in special crash dump kernels which are
+	  loaded in the main kernel with kexec-tools into a specially
+	  reserved region and then later executed after a crash by
+	  kdump/kexec.
+
+	  For more details see Documentation/kdump/kdump.txt
+
 config XEN_DOM0
 	def_bool y
 	depends on XEN
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 7d66bba..6a7384e 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -50,6 +50,7 @@ arm64-obj-$(CONFIG_RANDOMIZE_BASE)	+= kaslr.o
 arm64-obj-$(CONFIG_HIBERNATION)		+= hibernate.o hibernate-asm.o
 arm64-obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o	\
 					   cpu-reset.o
+arm64-obj-$(CONFIG_CRASH_DUMP)		+= crash_dump.o
 
 obj-y					+= $(arm64-obj-y) vdso/ probes/
 obj-m					+= $(arm64-obj-m)
diff --git a/arch/arm64/kernel/crash_dump.c b/arch/arm64/kernel/crash_dump.c
new file mode 100644
index 0000000..c3d5a21
--- /dev/null
+++ b/arch/arm64/kernel/crash_dump.c
@@ -0,0 +1,71 @@
+/*
+ * Routines for doing kexec-based kdump
+ *
+ * Copyright (C) 2014 Linaro Limited
+ * Author: AKASHI Takahiro <takahiro.akashi@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/crash_dump.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/memblock.h>
+#include <linux/uaccess.h>
+#include <asm/memory.h>
+
+/**
+ * copy_oldmem_page() - copy one page from old kernel memory
+ * @pfn: page frame number to be copied
+ * @buf: buffer where the copied page is placed
+ * @csize: number of bytes to copy
+ * @offset: offset in bytes into the page
+ * @userbuf: if set, @buf is in a user address space
+ *
+ * This function copies one page from old kernel memory into buffer pointed by
+ * @buf. If @buf is in userspace, set @userbuf to %1. Returns number of bytes
+ * copied or negative error in case of failure.
+ */
+ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
+			 size_t csize, unsigned long offset,
+			 int userbuf)
+{
+	void *vaddr;
+
+	if (!csize)
+		return 0;
+
+	vaddr = memremap(__pfn_to_phys(pfn), PAGE_SIZE, MEMREMAP_WB);
+	if (!vaddr)
+		return -ENOMEM;
+
+	if (userbuf) {
+		if (copy_to_user((char __user *)buf, vaddr + offset, csize)) {
+			memunmap(vaddr);
+			return -EFAULT;
+		}
+	} else {
+		memcpy(buf, vaddr + offset, csize);
+	}
+
+	memunmap(vaddr);
+
+	return csize;
+}
+
+/**
+ * elfcorehdr_read - read from ELF core header
+ * @buf: buffer where the data is placed
+ * @csize: number of bytes to read
+ * @ppos: address in the memory
+ *
+ * This function reads @count bytes from elf core header which exists
+ * on crash dump kernel's memory.
+ */
+ssize_t elfcorehdr_read(char *buf, size_t count, u64 *ppos)
+{
+	memcpy(buf, phys_to_virt((phys_addr_t)*ppos), count);
+	return count;
+}
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 1d62bf7..ef8adfd 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -38,6 +38,7 @@
 #include <linux/swiotlb.h>
 #include <linux/vmalloc.h>
 #include <linux/kexec.h>
+#include <linux/crash_dump.h>
 
 #include <asm/boot.h>
 #include <asm/fixmap.h>
@@ -183,6 +184,57 @@ static void __init reserve_crashkernel(void)
 }
 #endif /* CONFIG_KEXEC_CORE */
 
+#ifdef CONFIG_CRASH_DUMP
+static int __init early_init_dt_scan_elfcorehdr(unsigned long node,
+		const char *uname, int depth, void *data)
+{
+	const __be32 *reg;
+	int len;
+
+	if (depth != 1 || strcmp(uname, "chosen") != 0)
+		return 0;
+
+	reg = of_get_flat_dt_prop(node, "linux,elfcorehdr", &len);
+	if (!reg || (len < (dt_root_addr_cells + dt_root_size_cells)))
+		return 1;
+
+	elfcorehdr_addr = dt_mem_next_cell(dt_root_addr_cells, &reg);
+	elfcorehdr_size = dt_mem_next_cell(dt_root_size_cells, &reg);
+
+	return 1;
+}
+
+/*
+ * reserve_elfcorehdr() - reserves memory for elf core header
+ *
+ * This function reserves elf core header given in "elfcorehdr=" kernel
+ * command line parameter. This region contains all the information about
+ * primary kernel's core image and is used by a dump capture kernel to
+ * access the system memory on primary kernel.
+ */
+static void __init reserve_elfcorehdr(void)
+{
+	of_scan_flat_dt(early_init_dt_scan_elfcorehdr, NULL);
+
+	if (!elfcorehdr_size)
+		return;
+
+	if (memblock_is_region_reserved(elfcorehdr_addr, elfcorehdr_size)) {
+		pr_warn("elfcorehdr is overlapped\n");
+		return;
+	}
+
+	memblock_reserve(elfcorehdr_addr, elfcorehdr_size);
+
+	pr_info("Reserving %lldKB of memory@0x%llx for elfcorehdr\n",
+		elfcorehdr_size >> 10, elfcorehdr_addr);
+}
+#else
+static void __init reserve_elfcorehdr(void)
+{
+	;
+}
+#endif /* CONFIG_CRASH_DUMP */
 /*
  * Return the maximum physical address for ZONE_DMA (DMA_BIT_MASK(32)). It
  * currently assumes that for memory starting above 4G, 32-bit devices will
@@ -441,6 +493,8 @@ void __init arm64_memblock_init(void)
 
 	reserve_crashkernel();
 
+	reserve_elfcorehdr();
+
 	dma_contiguous_reserve(arm64_dma_phys_limit);
 
 	memblock_allow_resize();
-- 
2.10.0

[PATCH v28 6/9] arm64: kdump: provide /proc/vmcore file

[AKASHI Takahiro]

Add arch-specific functions to provide a dump file, /proc/vmcore.

This file is in ELF format and its ELF header needs to be prepared by
userspace tools, like kexec-tools, in adance. The primary kernel is
responsible to allocate the region with reserve_elfcorehdr() at boot time
and advertize its location to crash dump kernel via a new device-tree
property, "linux,elfcorehdr".

Then crash dump kernel will access the primary kernel's memory with
copy_oldmem_page(), which feeds the data page-by-page by ioremap'ing it
since it does not reside in linear mapping on crash dump kernel.

We also need our own elfcorehdr_read() here since the header is placed
within crash dump kernel's usable memory.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: James Morse <james.morse@arm.com>
---
 arch/arm64/Kconfig             | 11 +++++++
 arch/arm64/kernel/Makefile     |  1 +
 arch/arm64/kernel/crash_dump.c | 71 ++++++++++++++++++++++++++++++++++++++++++
 arch/arm64/mm/init.c           | 54 ++++++++++++++++++++++++++++++++
 4 files changed, 137 insertions(+)
 create mode 100644 arch/arm64/kernel/crash_dump.c

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 969ef88..399f84a 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -688,6 +688,17 @@ config KEXEC
 	  but it is independent of the system firmware.   And like a reboot
 	  you can start any kernel with it, not just Linux.
 
+config CRASH_DUMP
+	bool "Build kdump crash kernel"
+	help
+	  Generate crash dump after being started by kexec. This should
+	  be normally only set in special crash dump kernels which are
+	  loaded in the main kernel with kexec-tools into a specially
+	  reserved region and then later executed after a crash by
+	  kdump/kexec.
+
+	  For more details see Documentation/kdump/kdump.txt
+
 config XEN_DOM0
 	def_bool y
 	depends on XEN
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 7d66bba..6a7384e 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -50,6 +50,7 @@ arm64-obj-$(CONFIG_RANDOMIZE_BASE)	+= kaslr.o
 arm64-obj-$(CONFIG_HIBERNATION)		+= hibernate.o hibernate-asm.o
 arm64-obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o	\
 					   cpu-reset.o
+arm64-obj-$(CONFIG_CRASH_DUMP)		+= crash_dump.o
 
 obj-y					+= $(arm64-obj-y) vdso/ probes/
 obj-m					+= $(arm64-obj-m)
diff --git a/arch/arm64/kernel/crash_dump.c b/arch/arm64/kernel/crash_dump.c
new file mode 100644
index 0000000..c3d5a21
--- /dev/null
+++ b/arch/arm64/kernel/crash_dump.c
@@ -0,0 +1,71 @@
+/*
+ * Routines for doing kexec-based kdump
+ *
+ * Copyright (C) 2014 Linaro Limited
+ * Author: AKASHI Takahiro <takahiro.akashi@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/crash_dump.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/memblock.h>
+#include <linux/uaccess.h>
+#include <asm/memory.h>
+
+/**
+ * copy_oldmem_page() - copy one page from old kernel memory
+ * @pfn: page frame number to be copied
+ * @buf: buffer where the copied page is placed
+ * @csize: number of bytes to copy
+ * @offset: offset in bytes into the page
+ * @userbuf: if set, @buf is in a user address space
+ *
+ * This function copies one page from old kernel memory into buffer pointed by
+ * @buf. If @buf is in userspace, set @userbuf to %1. Returns number of bytes
+ * copied or negative error in case of failure.
+ */
+ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
+			 size_t csize, unsigned long offset,
+			 int userbuf)
+{
+	void *vaddr;
+
+	if (!csize)
+		return 0;
+
+	vaddr = memremap(__pfn_to_phys(pfn), PAGE_SIZE, MEMREMAP_WB);
+	if (!vaddr)
+		return -ENOMEM;
+
+	if (userbuf) {
+		if (copy_to_user((char __user *)buf, vaddr + offset, csize)) {
+			memunmap(vaddr);
+			return -EFAULT;
+		}
+	} else {
+		memcpy(buf, vaddr + offset, csize);
+	}
+
+	memunmap(vaddr);
+
+	return csize;
+}
+
+/**
+ * elfcorehdr_read - read from ELF core header
+ * @buf: buffer where the data is placed
+ * @csize: number of bytes to read
+ * @ppos: address in the memory
+ *
+ * This function reads @count bytes from elf core header which exists
+ * on crash dump kernel's memory.
+ */
+ssize_t elfcorehdr_read(char *buf, size_t count, u64 *ppos)
+{
+	memcpy(buf, phys_to_virt((phys_addr_t)*ppos), count);
+	return count;
+}
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 1d62bf7..ef8adfd 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -38,6 +38,7 @@
 #include <linux/swiotlb.h>
 #include <linux/vmalloc.h>
 #include <linux/kexec.h>
+#include <linux/crash_dump.h>
 
 #include <asm/boot.h>
 #include <asm/fixmap.h>
@@ -183,6 +184,57 @@ static void __init reserve_crashkernel(void)
 }
 #endif /* CONFIG_KEXEC_CORE */
 
+#ifdef CONFIG_CRASH_DUMP
+static int __init early_init_dt_scan_elfcorehdr(unsigned long node,
+		const char *uname, int depth, void *data)
+{
+	const __be32 *reg;
+	int len;
+
+	if (depth != 1 || strcmp(uname, "chosen") != 0)
+		return 0;
+
+	reg = of_get_flat_dt_prop(node, "linux,elfcorehdr", &len);
+	if (!reg || (len < (dt_root_addr_cells + dt_root_size_cells)))
+		return 1;
+
+	elfcorehdr_addr = dt_mem_next_cell(dt_root_addr_cells, &reg);
+	elfcorehdr_size = dt_mem_next_cell(dt_root_size_cells, &reg);
+
+	return 1;
+}
+
+/*
+ * reserve_elfcorehdr() - reserves memory for elf core header
+ *
+ * This function reserves elf core header given in "elfcorehdr=" kernel
+ * command line parameter. This region contains all the information about
+ * primary kernel's core image and is used by a dump capture kernel to
+ * access the system memory on primary kernel.
+ */
+static void __init reserve_elfcorehdr(void)
+{
+	of_scan_flat_dt(early_init_dt_scan_elfcorehdr, NULL);
+
+	if (!elfcorehdr_size)
+		return;
+
+	if (memblock_is_region_reserved(elfcorehdr_addr, elfcorehdr_size)) {
+		pr_warn("elfcorehdr is overlapped\n");
+		return;
+	}
+
+	memblock_reserve(elfcorehdr_addr, elfcorehdr_size);
+
+	pr_info("Reserving %lldKB of memory at 0x%llx for elfcorehdr\n",
+		elfcorehdr_size >> 10, elfcorehdr_addr);
+}
+#else
+static void __init reserve_elfcorehdr(void)
+{
+	;
+}
+#endif /* CONFIG_CRASH_DUMP */
 /*
  * Return the maximum physical address for ZONE_DMA (DMA_BIT_MASK(32)). It
  * currently assumes that for memory starting above 4G, 32-bit devices will
@@ -441,6 +493,8 @@ void __init arm64_memblock_init(void)
 
 	reserve_crashkernel();
 
+	reserve_elfcorehdr();
+
 	dma_contiguous_reserve(arm64_dma_phys_limit);
 
 	memblock_allow_resize();
-- 
2.10.0


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

[PATCH v28 7/9] arm64: kdump: enable kdump in defconfig

[AKASHI Takahiro]

Kdump is enabled by default as kexec is.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index dab2cb0..24922c9 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -79,6 +79,7 @@ CONFIG_CMA=y
 CONFIG_SECCOMP=y
 CONFIG_XEN=y
 CONFIG_KEXEC=y
+CONFIG_CRASH_DUMP=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_COMPAT=y
 CONFIG_CPU_IDLE=y
-- 
2.10.0

[PATCH v28 7/9] arm64: kdump: enable kdump in defconfig

[AKASHI Takahiro]

Kdump is enabled by default as kexec is.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index dab2cb0..24922c9 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -79,6 +79,7 @@ CONFIG_CMA=y
 CONFIG_SECCOMP=y
 CONFIG_XEN=y
 CONFIG_KEXEC=y
+CONFIG_CRASH_DUMP=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_COMPAT=y
 CONFIG_CPU_IDLE=y
-- 
2.10.0


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

[PATCH v28 8/9] Documentation: kdump: describe arm64 port

[AKASHI Takahiro]

Add arch specific descriptions about kdump usage on arm64 to kdump.txt.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
---
 Documentation/kdump/kdump.txt | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index b0eb27b..615434d 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -18,7 +18,7 @@ memory image to a dump file on the local disk, or across the network to
 a remote system.
 
 Kdump and kexec are currently supported on the x86, x86_64, ppc64, ia64,
-s390x and arm architectures.
+s390x, arm and arm64 architectures.
 
 When the system kernel boots, it reserves a small section of memory for
 the dump-capture kernel. This ensures that ongoing Direct Memory Access
@@ -249,6 +249,13 @@ Dump-capture kernel config options (Arch Dependent, arm)
 
     AUTO_ZRELADDR=y
 
+Dump-capture kernel config options (Arch Dependent, arm64)
+----------------------------------------------------------
+
+- Please note that kvm of the dump-capture kernel will not be enabled
+  on non-VHE systems even if it is configured. This is because the CPU
+  will not be reset to EL2 on panic.
+
 Extended crashkernel syntax
 ===========================
 
@@ -305,6 +312,8 @@ Boot into System Kernel
    kernel will automatically locate the crash kernel image within the
    first 512MB of RAM if X is not given.
 
+   On arm64, use "crashkernel=Y[@X]".  Note that the start address of
+   the kernel, X if explicitly specified, must be aligned to 2MiB (0x200000).
 
 Load the Dump-capture Kernel
 ============================
@@ -327,6 +336,8 @@ For s390x:
 	- Use image or bzImage
 For arm:
 	- Use zImage
+For arm64:
+	- Use vmlinux or Image
 
 If you are using a uncompressed vmlinux image then use following command
 to load dump-capture kernel.
@@ -370,6 +381,9 @@ For s390x:
 For arm:
 	"1 maxcpus=1 reset_devices"
 
+For arm64:
+	"1 maxcpus=1 reset_devices"
+
 Notes on loading the dump-capture kernel:
 
 * By default, the ELF headers are stored in ELF64 format to support
-- 
2.10.0

[PATCH v28 8/9] Documentation: kdump: describe arm64 port

[AKASHI Takahiro]

Add arch specific descriptions about kdump usage on arm64 to kdump.txt.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
---
 Documentation/kdump/kdump.txt | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index b0eb27b..615434d 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -18,7 +18,7 @@ memory image to a dump file on the local disk, or across the network to
 a remote system.
 
 Kdump and kexec are currently supported on the x86, x86_64, ppc64, ia64,
-s390x and arm architectures.
+s390x, arm and arm64 architectures.
 
 When the system kernel boots, it reserves a small section of memory for
 the dump-capture kernel. This ensures that ongoing Direct Memory Access
@@ -249,6 +249,13 @@ Dump-capture kernel config options (Arch Dependent, arm)
 
     AUTO_ZRELADDR=y
 
+Dump-capture kernel config options (Arch Dependent, arm64)
+----------------------------------------------------------
+
+- Please note that kvm of the dump-capture kernel will not be enabled
+  on non-VHE systems even if it is configured. This is because the CPU
+  will not be reset to EL2 on panic.
+
 Extended crashkernel syntax
 ===========================
 
@@ -305,6 +312,8 @@ Boot into System Kernel
    kernel will automatically locate the crash kernel image within the
    first 512MB of RAM if X is not given.
 
+   On arm64, use "crashkernel=Y[@X]".  Note that the start address of
+   the kernel, X if explicitly specified, must be aligned to 2MiB (0x200000).
 
 Load the Dump-capture Kernel
 ============================
@@ -327,6 +336,8 @@ For s390x:
 	- Use image or bzImage
 For arm:
 	- Use zImage
+For arm64:
+	- Use vmlinux or Image
 
 If you are using a uncompressed vmlinux image then use following command
 to load dump-capture kernel.
@@ -370,6 +381,9 @@ For s390x:
 For arm:
 	"1 maxcpus=1 reset_devices"
 
+For arm64:
+	"1 maxcpus=1 reset_devices"
+
 Notes on loading the dump-capture kernel:
 
 * By default, the ELF headers are stored in ELF64 format to support
-- 
2.10.0


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

[PATCH v28 9/9] Documentation: dt: chosen properties for arm64 kdump

[AKASHI Takahiro]

From: James Morse <james.morse-5wv7dgnIgG8@public.gmane.org>

Add documentation for
	linux,crashkernel-base and crashkernel-size,
	linux,usable-memory-range
	linux,elfcorehdr
used by arm64 kdump to decribe the kdump reserved area, and
the elfcorehdr's location within it.

Signed-off-by: James Morse <james.morse-5wv7dgnIgG8@public.gmane.org>
[takahiro.akashi-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org: added "linux,crashkernel-base" and "-size" ]
Signed-off-by: AKASHI Takahiro <takahiro.akashi-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
---
 Documentation/devicetree/bindings/chosen.txt | 50 ++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt
index 6ae9d82..7b11516 100644
--- a/Documentation/devicetree/bindings/chosen.txt
+++ b/Documentation/devicetree/bindings/chosen.txt
@@ -52,3 +52,53 @@ This property is set (currently only on PowerPC, and only needed on
 book3e) by some versions of kexec-tools to tell the new kernel that it
 is being booted by kexec, as the booting environment may differ (e.g.
 a different secondary CPU release mechanism)
+
+linux,crashkernel-base
+linux,crashkernel-size
+----------------------
+
+These properties (currently used on PowerPC and arm64) indicates
+the base address and the size, respectively, of the reserved memory
+range for crash dump kernel.
+e.g.
+
+/ {
+	chosen {
+		linux,crashkernel-base = <0x9 0xf0000000>;
+		linux,crashkernel-size = <0x0 0x10000000>;
+	};
+};
+
+linux,usable-memory-range
+-------------------------
+
+This property (currently used only on arm64) holds the memory range,
+the base address and the size, which can be used as system ram on
+the *current* kernel. Note that, if this property is present, any memory
+regions under "memory" nodes in DT blob or ones marked as "conventional
+memory" in EFI memory map should be ignored.
+e.g.
+
+/ {
+	chosen {
+		linux,usable-memory-range = <0x9 0xf0000000 0x0 0x10000000>;
+	};
+};
+
+The main usage is for crash dump kernel to identify its own usable
+memory and exclude, at its boot time, any other memory areas that are
+part of the panicked kernel's memory.
+
+linux,elfcorehdr
+----------------
+
+This property (currently used only on arm64) holds the memory range,
+the address and the size, of the elf core header which mainly describes
+the panicked kernel's memory layout as PT_LOAD segments of elf format.
+e.g.
+
+/ {
+	chosen {
+		linux,elfcorehdr = <0x9 0xfffff000 0x0 0x800>;
+	};
+};
-- 
2.10.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v28 9/9] Documentation: dt: chosen properties for arm64 kdump

[AKASHI Takahiro]

From: James Morse <james.morse@arm.com>

Add documentation for
	linux,crashkernel-base and crashkernel-size,
	linux,usable-memory-range
	linux,elfcorehdr
used by arm64 kdump to decribe the kdump reserved area, and
the elfcorehdr's location within it.

Signed-off-by: James Morse <james.morse@arm.com>
[takahiro.akashi at linaro.org: added "linux,crashkernel-base" and "-size" ]
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: devicetree at vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
---
 Documentation/devicetree/bindings/chosen.txt | 50 ++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt
index 6ae9d82..7b11516 100644
--- a/Documentation/devicetree/bindings/chosen.txt
+++ b/Documentation/devicetree/bindings/chosen.txt
@@ -52,3 +52,53 @@ This property is set (currently only on PowerPC, and only needed on
 book3e) by some versions of kexec-tools to tell the new kernel that it
 is being booted by kexec, as the booting environment may differ (e.g.
 a different secondary CPU release mechanism)
+
+linux,crashkernel-base
+linux,crashkernel-size
+----------------------
+
+These properties (currently used on PowerPC and arm64) indicates
+the base address and the size, respectively, of the reserved memory
+range for crash dump kernel.
+e.g.
+
+/ {
+	chosen {
+		linux,crashkernel-base = <0x9 0xf0000000>;
+		linux,crashkernel-size = <0x0 0x10000000>;
+	};
+};
+
+linux,usable-memory-range
+-------------------------
+
+This property (currently used only on arm64) holds the memory range,
+the base address and the size, which can be used as system ram on
+the *current* kernel. Note that, if this property is present, any memory
+regions under "memory" nodes in DT blob or ones marked as "conventional
+memory" in EFI memory map should be ignored.
+e.g.
+
+/ {
+	chosen {
+		linux,usable-memory-range = <0x9 0xf0000000 0x0 0x10000000>;
+	};
+};
+
+The main usage is for crash dump kernel to identify its own usable
+memory and exclude, at its boot time, any other memory areas that are
+part of the panicked kernel's memory.
+
+linux,elfcorehdr
+----------------
+
+This property (currently used only on arm64) holds the memory range,
+the address and the size, of the elf core header which mainly describes
+the panicked kernel's memory layout as PT_LOAD segments of elf format.
+e.g.
+
+/ {
+	chosen {
+		linux,elfcorehdr = <0x9 0xfffff000 0x0 0x800>;
+	};
+};
-- 
2.10.0

[PATCH v28 9/9] Documentation: dt: chosen properties for arm64 kdump

[AKASHI Takahiro]

From: James Morse <james.morse@arm.com>

Add documentation for
	linux,crashkernel-base and crashkernel-size,
	linux,usable-memory-range
	linux,elfcorehdr
used by arm64 kdump to decribe the kdump reserved area, and
the elfcorehdr's location within it.

Signed-off-by: James Morse <james.morse@arm.com>
[takahiro.akashi@linaro.org: added "linux,crashkernel-base" and "-size" ]
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
---
 Documentation/devicetree/bindings/chosen.txt | 50 ++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt
index 6ae9d82..7b11516 100644
--- a/Documentation/devicetree/bindings/chosen.txt
+++ b/Documentation/devicetree/bindings/chosen.txt
@@ -52,3 +52,53 @@ This property is set (currently only on PowerPC, and only needed on
 book3e) by some versions of kexec-tools to tell the new kernel that it
 is being booted by kexec, as the booting environment may differ (e.g.
 a different secondary CPU release mechanism)
+
+linux,crashkernel-base
+linux,crashkernel-size
+----------------------
+
+These properties (currently used on PowerPC and arm64) indicates
+the base address and the size, respectively, of the reserved memory
+range for crash dump kernel.
+e.g.
+
+/ {
+	chosen {
+		linux,crashkernel-base = <0x9 0xf0000000>;
+		linux,crashkernel-size = <0x0 0x10000000>;
+	};
+};
+
+linux,usable-memory-range
+-------------------------
+
+This property (currently used only on arm64) holds the memory range,
+the base address and the size, which can be used as system ram on
+the *current* kernel. Note that, if this property is present, any memory
+regions under "memory" nodes in DT blob or ones marked as "conventional
+memory" in EFI memory map should be ignored.
+e.g.
+
+/ {
+	chosen {
+		linux,usable-memory-range = <0x9 0xf0000000 0x0 0x10000000>;
+	};
+};
+
+The main usage is for crash dump kernel to identify its own usable
+memory and exclude, at its boot time, any other memory areas that are
+part of the panicked kernel's memory.
+
+linux,elfcorehdr
+----------------
+
+This property (currently used only on arm64) holds the memory range,
+the address and the size, of the elf core header which mainly describes
+the panicked kernel's memory layout as PT_LOAD segments of elf format.
+e.g.
+
+/ {
+	chosen {
+		linux,elfcorehdr = <0x9 0xfffff000 0x0 0x800>;
+	};
+};
-- 
2.10.0


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

Re: [PATCH v28 1/9] memblock: add memblock_cap_memory_range()

[Catalin Marinas]

Hi Andrew,

On Thu, Nov 24, 2016 at 06:57:17PM +0900, AKASHI Takahiro wrote:
> Add memblock_cap_memory_range() which will remove all the memblock regions
> except the memory range specified in the arguments. In addition, rework is
> done on memblock_mem_limit_remove_map() to re-implement it using
> memblock_cap_memory_range().
> 
> This function, like memblock_mem_limit_remove_map(), will not remove
> memblocks with MEMMAP_NOMAP attribute as they may be mapped and accessed
> later as "device memory."
> See the commit a571d4eb55d8 ("mm/memblock.c: add new infrastructure to
> address the mem limit issue").
> 
> This function is used, in a succeeding patch in the series of arm64 kdump
> suuport, to limit the range of usable memory, or System RAM, on crash dump
> kernel.
> (Please note that "mem=" parameter is of little use for this purpose.)
> 
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> Reviewed-by: Will Deacon <will.deacon@arm.com>
> Cc: linux-mm@kvack.org
> Cc: Andrew Morton <akpm@linux-foundation.org>
> ---
>  include/linux/memblock.h |  1 +
>  mm/memblock.c            | 44 +++++++++++++++++++++++++++++---------------
>  2 files changed, 30 insertions(+), 15 deletions(-)

Are you OK with this patch to go in via the arm64 tree (together with
the other patches in this series)?

Thanks.

-- 
Catalin

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH v28 1/9] memblock: add memblock_cap_memory_range()

[Catalin Marinas]

Hi Andrew,

On Thu, Nov 24, 2016 at 06:57:17PM +0900, AKASHI Takahiro wrote:
> Add memblock_cap_memory_range() which will remove all the memblock regions
> except the memory range specified in the arguments. In addition, rework is
> done on memblock_mem_limit_remove_map() to re-implement it using
> memblock_cap_memory_range().
> 
> This function, like memblock_mem_limit_remove_map(), will not remove
> memblocks with MEMMAP_NOMAP attribute as they may be mapped and accessed
> later as "device memory."
> See the commit a571d4eb55d8 ("mm/memblock.c: add new infrastructure to
> address the mem limit issue").
> 
> This function is used, in a succeeding patch in the series of arm64 kdump
> suuport, to limit the range of usable memory, or System RAM, on crash dump
> kernel.
> (Please note that "mem=" parameter is of little use for this purpose.)
> 
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> Reviewed-by: Will Deacon <will.deacon@arm.com>
> Cc: linux-mm at kvack.org
> Cc: Andrew Morton <akpm@linux-foundation.org>
> ---
>  include/linux/memblock.h |  1 +
>  mm/memblock.c            | 44 +++++++++++++++++++++++++++++---------------
>  2 files changed, 30 insertions(+), 15 deletions(-)

Are you OK with this patch to go in via the arm64 tree (together with
the other patches in this series)?

Thanks.

-- 
Catalin

Re: [PATCH v28 1/9] memblock: add memblock_cap_memory_range()

[Catalin Marinas]

Hi Andrew,

On Thu, Nov 24, 2016 at 06:57:17PM +0900, AKASHI Takahiro wrote:
> Add memblock_cap_memory_range() which will remove all the memblock regions
> except the memory range specified in the arguments. In addition, rework is
> done on memblock_mem_limit_remove_map() to re-implement it using
> memblock_cap_memory_range().
> 
> This function, like memblock_mem_limit_remove_map(), will not remove
> memblocks with MEMMAP_NOMAP attribute as they may be mapped and accessed
> later as "device memory."
> See the commit a571d4eb55d8 ("mm/memblock.c: add new infrastructure to
> address the mem limit issue").
> 
> This function is used, in a succeeding patch in the series of arm64 kdump
> suuport, to limit the range of usable memory, or System RAM, on crash dump
> kernel.
> (Please note that "mem=" parameter is of little use for this purpose.)
> 
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> Reviewed-by: Will Deacon <will.deacon@arm.com>
> Cc: linux-mm@kvack.org
> Cc: Andrew Morton <akpm@linux-foundation.org>
> ---
>  include/linux/memblock.h |  1 +
>  mm/memblock.c            | 44 +++++++++++++++++++++++++++++---------------
>  2 files changed, 30 insertions(+), 15 deletions(-)

Are you OK with this patch to go in via the arm64 tree (together with
the other patches in this series)?

Thanks.

-- 
Catalin

_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

Re: [PATCH v28 9/9] Documentation: dt: chosen properties for arm64 kdump

[Catalin Marinas]

On Thu, Nov 24, 2016 at 06:59:44PM +0900, AKASHI Takahiro wrote:
> From: James Morse <james.morse-5wv7dgnIgG8@public.gmane.org>
> 
> Add documentation for
> 	linux,crashkernel-base and crashkernel-size,
> 	linux,usable-memory-range
> 	linux,elfcorehdr
> used by arm64 kdump to decribe the kdump reserved area, and
> the elfcorehdr's location within it.
> 
> Signed-off-by: James Morse <james.morse-5wv7dgnIgG8@public.gmane.org>
> [takahiro.akashi-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org: added "linux,crashkernel-base" and "-size" ]
> Signed-off-by: AKASHI Takahiro <takahiro.akashi-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>

Rob, Mark, are you ok with this patch?

-- 
Catalin
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v28 9/9] Documentation: dt: chosen properties for arm64 kdump

[Catalin Marinas]

On Thu, Nov 24, 2016 at 06:59:44PM +0900, AKASHI Takahiro wrote:
> From: James Morse <james.morse@arm.com>
> 
> Add documentation for
> 	linux,crashkernel-base and crashkernel-size,
> 	linux,usable-memory-range
> 	linux,elfcorehdr
> used by arm64 kdump to decribe the kdump reserved area, and
> the elfcorehdr's location within it.
> 
> Signed-off-by: James Morse <james.morse@arm.com>
> [takahiro.akashi at linaro.org: added "linux,crashkernel-base" and "-size" ]
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> Cc: devicetree at vger.kernel.org
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>

Rob, Mark, are you ok with this patch?

-- 
Catalin

Re: [PATCH v28 9/9] Documentation: dt: chosen properties for arm64 kdump

[Catalin Marinas]

On Thu, Nov 24, 2016 at 06:59:44PM +0900, AKASHI Takahiro wrote:
> From: James Morse <james.morse@arm.com>
> 
> Add documentation for
> 	linux,crashkernel-base and crashkernel-size,
> 	linux,usable-memory-range
> 	linux,elfcorehdr
> used by arm64 kdump to decribe the kdump reserved area, and
> the elfcorehdr's location within it.
> 
> Signed-off-by: James Morse <james.morse@arm.com>
> [takahiro.akashi@linaro.org: added "linux,crashkernel-base" and "-size" ]
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> Cc: devicetree@vger.kernel.org
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>

Rob, Mark, are you ok with this patch?

-- 
Catalin

_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

[PATCH v28 0/9] arm64: add kdump support

[Catalin Marinas]

On Thu, Nov 24, 2016 at 06:55:23PM +0900, AKASHI Takahiro wrote:
> AKASHI Takahiro (8):
>   arm64: kdump: reserve memory for crash dump kernel
>   memblock: add memblock_cap_memory_range()
>   arm64: limit memory regions based on DT property, usable-memory-range
>   arm64: kdump: implement machine_crash_shutdown()
>   arm64: kdump: add kdump support
>   arm64: kdump: add VMCOREINFO's for user-space coredump tools
>   arm64: kdump: enable kdump in the arm64 defconfig
>   arm64: kdump: update a kernel doc

Given that it's nearly -rc7, holiday in the US and more acks needed, we
should defer merging this series to 4.11. In the meantime, since Will is
going to handle the 4.11 merging window, I'm acking the whole series:

Acked-by: Catalin Marinas <catalin.marinas@arm.com>

Re: [PATCH v28 0/9] arm64: add kdump support

[Catalin Marinas]

On Thu, Nov 24, 2016 at 06:55:23PM +0900, AKASHI Takahiro wrote:
> AKASHI Takahiro (8):
>   arm64: kdump: reserve memory for crash dump kernel
>   memblock: add memblock_cap_memory_range()
>   arm64: limit memory regions based on DT property, usable-memory-range
>   arm64: kdump: implement machine_crash_shutdown()
>   arm64: kdump: add kdump support
>   arm64: kdump: add VMCOREINFO's for user-space coredump tools
>   arm64: kdump: enable kdump in the arm64 defconfig
>   arm64: kdump: update a kernel doc

Given that it's nearly -rc7, holiday in the US and more acks needed, we
should defer merging this series to 4.11. In the meantime, since Will is
going to handle the 4.11 merging window, I'm acking the whole series:

Acked-by: Catalin Marinas <catalin.marinas@arm.com>

_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

[PATCH v28 4/9] arm64: kdump: implement machine_crash_shutdown()

[Catalin Marinas]

On Thu, Nov 24, 2016 at 06:58:05PM +0900, AKASHI Takahiro wrote:
> diff --git a/arch/arm64/include/asm/kexec.h b/arch/arm64/include/asm/kexec.h
> index 04744dc..b5168e8 100644
> --- a/arch/arm64/include/asm/kexec.h
> +++ b/arch/arm64/include/asm/kexec.h
> @@ -40,7 +40,47 @@
>  static inline void crash_setup_regs(struct pt_regs *newregs,
>  				    struct pt_regs *oldregs)
>  {
> -	/* Empty routine needed to avoid build errors. */
> +	if (oldregs) {
> +		memcpy(newregs, oldregs, sizeof(*newregs));
> +	} else {
> +		u64 tmp1, tmp2;
> +
> +		__asm__ __volatile__ (
> +			"stp	 x0,   x1, [%2, #16 *  0]\n"
> +			"stp	 x2,   x3, [%2, #16 *  1]\n"
> +			"stp	 x4,   x5, [%2, #16 *  2]\n"
> +			"stp	 x6,   x7, [%2, #16 *  3]\n"
> +			"stp	 x8,   x9, [%2, #16 *  4]\n"
> +			"stp	x10,  x11, [%2, #16 *  5]\n"
> +			"stp	x12,  x13, [%2, #16 *  6]\n"
> +			"stp	x14,  x15, [%2, #16 *  7]\n"
> +			"stp	x16,  x17, [%2, #16 *  8]\n"
> +			"stp	x18,  x19, [%2, #16 *  9]\n"
> +			"stp	x20,  x21, [%2, #16 * 10]\n"
> +			"stp	x22,  x23, [%2, #16 * 11]\n"
> +			"stp	x24,  x25, [%2, #16 * 12]\n"
> +			"stp	x26,  x27, [%2, #16 * 13]\n"
> +			"stp	x28,  x29, [%2, #16 * 14]\n"
> +			"mov	 %0,  sp\n"
> +			"stp	x30,  %0,  [%2, #16 * 15]\n"
> +
> +			"/* faked current PSTATE */\n"
> +			"mrs	 %0, CurrentEL\n"
> +			"mrs	 %1, SPSEL\n"
> +			"orr	 %0, %0, %1\n"
> +			"mrs	 %1, DAIF\n"
> +			"orr	 %0, %0, %1\n"
> +			"mrs	 %1, NZCV\n"
> +			"orr	 %0, %0, %1\n"
> +			/* pc */
> +			"adr	 %1, 1f\n"
> +		"1:\n"
> +			"stp	 %1, %0,   [%2, #16 * 16]\n"
> +			: "+r" (tmp1), "+r" (tmp2)
> +			: "r" (newregs)
> +			: "memory"

tmp1 and tmp2 are not input arguments here, so you should use the "=&"
modifier. With my compiler, I get warnings of these variables being used
uninitialised.

-- 
Catalin

Re: [PATCH v28 4/9] arm64: kdump: implement machine_crash_shutdown()

[Catalin Marinas]

On Thu, Nov 24, 2016 at 06:58:05PM +0900, AKASHI Takahiro wrote:
> diff --git a/arch/arm64/include/asm/kexec.h b/arch/arm64/include/asm/kexec.h
> index 04744dc..b5168e8 100644
> --- a/arch/arm64/include/asm/kexec.h
> +++ b/arch/arm64/include/asm/kexec.h
> @@ -40,7 +40,47 @@
>  static inline void crash_setup_regs(struct pt_regs *newregs,
>  				    struct pt_regs *oldregs)
>  {
> -	/* Empty routine needed to avoid build errors. */
> +	if (oldregs) {
> +		memcpy(newregs, oldregs, sizeof(*newregs));
> +	} else {
> +		u64 tmp1, tmp2;
> +
> +		__asm__ __volatile__ (
> +			"stp	 x0,   x1, [%2, #16 *  0]\n"
> +			"stp	 x2,   x3, [%2, #16 *  1]\n"
> +			"stp	 x4,   x5, [%2, #16 *  2]\n"
> +			"stp	 x6,   x7, [%2, #16 *  3]\n"
> +			"stp	 x8,   x9, [%2, #16 *  4]\n"
> +			"stp	x10,  x11, [%2, #16 *  5]\n"
> +			"stp	x12,  x13, [%2, #16 *  6]\n"
> +			"stp	x14,  x15, [%2, #16 *  7]\n"
> +			"stp	x16,  x17, [%2, #16 *  8]\n"
> +			"stp	x18,  x19, [%2, #16 *  9]\n"
> +			"stp	x20,  x21, [%2, #16 * 10]\n"
> +			"stp	x22,  x23, [%2, #16 * 11]\n"
> +			"stp	x24,  x25, [%2, #16 * 12]\n"
> +			"stp	x26,  x27, [%2, #16 * 13]\n"
> +			"stp	x28,  x29, [%2, #16 * 14]\n"
> +			"mov	 %0,  sp\n"
> +			"stp	x30,  %0,  [%2, #16 * 15]\n"
> +
> +			"/* faked current PSTATE */\n"
> +			"mrs	 %0, CurrentEL\n"
> +			"mrs	 %1, SPSEL\n"
> +			"orr	 %0, %0, %1\n"
> +			"mrs	 %1, DAIF\n"
> +			"orr	 %0, %0, %1\n"
> +			"mrs	 %1, NZCV\n"
> +			"orr	 %0, %0, %1\n"
> +			/* pc */
> +			"adr	 %1, 1f\n"
> +		"1:\n"
> +			"stp	 %1, %0,   [%2, #16 * 16]\n"
> +			: "+r" (tmp1), "+r" (tmp2)
> +			: "r" (newregs)
> +			: "memory"

tmp1 and tmp2 are not input arguments here, so you should use the "=&"
modifier. With my compiler, I get warnings of these variables being used
uninitialised.

-- 
Catalin

_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

[PATCH v28 4/9] arm64: kdump: implement machine_crash_shutdown()

[AKASHI Takahiro]

On Mon, Nov 28, 2016 at 03:04:33PM +0000, Catalin Marinas wrote:
> On Thu, Nov 24, 2016 at 06:58:05PM +0900, AKASHI Takahiro wrote:
> > diff --git a/arch/arm64/include/asm/kexec.h b/arch/arm64/include/asm/kexec.h
> > index 04744dc..b5168e8 100644
> > --- a/arch/arm64/include/asm/kexec.h
> > +++ b/arch/arm64/include/asm/kexec.h
> > @@ -40,7 +40,47 @@
> >  static inline void crash_setup_regs(struct pt_regs *newregs,
> >  				    struct pt_regs *oldregs)
> >  {
> > -	/* Empty routine needed to avoid build errors. */
> > +	if (oldregs) {
> > +		memcpy(newregs, oldregs, sizeof(*newregs));
> > +	} else {
> > +		u64 tmp1, tmp2;
> > +
> > +		__asm__ __volatile__ (
> > +			"stp	 x0,   x1, [%2, #16 *  0]\n"
> > +			"stp	 x2,   x3, [%2, #16 *  1]\n"
> > +			"stp	 x4,   x5, [%2, #16 *  2]\n"
> > +			"stp	 x6,   x7, [%2, #16 *  3]\n"
> > +			"stp	 x8,   x9, [%2, #16 *  4]\n"
> > +			"stp	x10,  x11, [%2, #16 *  5]\n"
> > +			"stp	x12,  x13, [%2, #16 *  6]\n"
> > +			"stp	x14,  x15, [%2, #16 *  7]\n"
> > +			"stp	x16,  x17, [%2, #16 *  8]\n"
> > +			"stp	x18,  x19, [%2, #16 *  9]\n"
> > +			"stp	x20,  x21, [%2, #16 * 10]\n"
> > +			"stp	x22,  x23, [%2, #16 * 11]\n"
> > +			"stp	x24,  x25, [%2, #16 * 12]\n"
> > +			"stp	x26,  x27, [%2, #16 * 13]\n"
> > +			"stp	x28,  x29, [%2, #16 * 14]\n"
> > +			"mov	 %0,  sp\n"
> > +			"stp	x30,  %0,  [%2, #16 * 15]\n"
> > +
> > +			"/* faked current PSTATE */\n"
> > +			"mrs	 %0, CurrentEL\n"
> > +			"mrs	 %1, SPSEL\n"
> > +			"orr	 %0, %0, %1\n"
> > +			"mrs	 %1, DAIF\n"
> > +			"orr	 %0, %0, %1\n"
> > +			"mrs	 %1, NZCV\n"
> > +			"orr	 %0, %0, %1\n"
> > +			/* pc */
> > +			"adr	 %1, 1f\n"
> > +		"1:\n"
> > +			"stp	 %1, %0,   [%2, #16 * 16]\n"
> > +			: "+r" (tmp1), "+r" (tmp2)
> > +			: "r" (newregs)
> > +			: "memory"
> 
> tmp1 and tmp2 are not input arguments here, so you should use the "=&"
> modifier. With my compiler, I get warnings of these variables being used
> uninitialised.

Thank you for this heads-up.
(I misunderstood "+" a bit.)
With this change applied, I confirmed that kdump still works.

-Takahiro AKASHI

> -- 
> Catalin

Re: [PATCH v28 4/9] arm64: kdump: implement machine_crash_shutdown()

[AKASHI Takahiro]

On Mon, Nov 28, 2016 at 03:04:33PM +0000, Catalin Marinas wrote:
> On Thu, Nov 24, 2016 at 06:58:05PM +0900, AKASHI Takahiro wrote:
> > diff --git a/arch/arm64/include/asm/kexec.h b/arch/arm64/include/asm/kexec.h
> > index 04744dc..b5168e8 100644
> > --- a/arch/arm64/include/asm/kexec.h
> > +++ b/arch/arm64/include/asm/kexec.h
> > @@ -40,7 +40,47 @@
> >  static inline void crash_setup_regs(struct pt_regs *newregs,
> >  				    struct pt_regs *oldregs)
> >  {
> > -	/* Empty routine needed to avoid build errors. */
> > +	if (oldregs) {
> > +		memcpy(newregs, oldregs, sizeof(*newregs));
> > +	} else {
> > +		u64 tmp1, tmp2;
> > +
> > +		__asm__ __volatile__ (
> > +			"stp	 x0,   x1, [%2, #16 *  0]\n"
> > +			"stp	 x2,   x3, [%2, #16 *  1]\n"
> > +			"stp	 x4,   x5, [%2, #16 *  2]\n"
> > +			"stp	 x6,   x7, [%2, #16 *  3]\n"
> > +			"stp	 x8,   x9, [%2, #16 *  4]\n"
> > +			"stp	x10,  x11, [%2, #16 *  5]\n"
> > +			"stp	x12,  x13, [%2, #16 *  6]\n"
> > +			"stp	x14,  x15, [%2, #16 *  7]\n"
> > +			"stp	x16,  x17, [%2, #16 *  8]\n"
> > +			"stp	x18,  x19, [%2, #16 *  9]\n"
> > +			"stp	x20,  x21, [%2, #16 * 10]\n"
> > +			"stp	x22,  x23, [%2, #16 * 11]\n"
> > +			"stp	x24,  x25, [%2, #16 * 12]\n"
> > +			"stp	x26,  x27, [%2, #16 * 13]\n"
> > +			"stp	x28,  x29, [%2, #16 * 14]\n"
> > +			"mov	 %0,  sp\n"
> > +			"stp	x30,  %0,  [%2, #16 * 15]\n"
> > +
> > +			"/* faked current PSTATE */\n"
> > +			"mrs	 %0, CurrentEL\n"
> > +			"mrs	 %1, SPSEL\n"
> > +			"orr	 %0, %0, %1\n"
> > +			"mrs	 %1, DAIF\n"
> > +			"orr	 %0, %0, %1\n"
> > +			"mrs	 %1, NZCV\n"
> > +			"orr	 %0, %0, %1\n"
> > +			/* pc */
> > +			"adr	 %1, 1f\n"
> > +		"1:\n"
> > +			"stp	 %1, %0,   [%2, #16 * 16]\n"
> > +			: "+r" (tmp1), "+r" (tmp2)
> > +			: "r" (newregs)
> > +			: "memory"
> 
> tmp1 and tmp2 are not input arguments here, so you should use the "=&"
> modifier. With my compiler, I get warnings of these variables being used
> uninitialised.

Thank you for this heads-up.
(I misunderstood "+" a bit.)
With this change applied, I confirmed that kdump still works.

-Takahiro AKASHI

> -- 
> Catalin

_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

[PATCH v28 0/9] arm64: add kdump support

[Will Deacon]

On Fri, Nov 25, 2016 at 04:20:40PM +0000, Catalin Marinas wrote:
> On Thu, Nov 24, 2016 at 06:55:23PM +0900, AKASHI Takahiro wrote:
> > AKASHI Takahiro (8):
> >   arm64: kdump: reserve memory for crash dump kernel
> >   memblock: add memblock_cap_memory_range()
> >   arm64: limit memory regions based on DT property, usable-memory-range
> >   arm64: kdump: implement machine_crash_shutdown()
> >   arm64: kdump: add kdump support
> >   arm64: kdump: add VMCOREINFO's for user-space coredump tools
> >   arm64: kdump: enable kdump in the arm64 defconfig
> >   arm64: kdump: update a kernel doc
> 
> Given that it's nearly -rc7, holiday in the US and more acks needed, we
> should defer merging this series to 4.11. In the meantime, since Will is
> going to handle the 4.11 merging window, I'm acking the whole series:
> 
> Acked-by: Catalin Marinas <catalin.marinas@arm.com>

Okey doke. I'll keep my eyes peeled for a new version in the new year.

Will

Re: [PATCH v28 0/9] arm64: add kdump support

[Will Deacon]

On Fri, Nov 25, 2016 at 04:20:40PM +0000, Catalin Marinas wrote:
> On Thu, Nov 24, 2016 at 06:55:23PM +0900, AKASHI Takahiro wrote:
> > AKASHI Takahiro (8):
> >   arm64: kdump: reserve memory for crash dump kernel
> >   memblock: add memblock_cap_memory_range()
> >   arm64: limit memory regions based on DT property, usable-memory-range
> >   arm64: kdump: implement machine_crash_shutdown()
> >   arm64: kdump: add kdump support
> >   arm64: kdump: add VMCOREINFO's for user-space coredump tools
> >   arm64: kdump: enable kdump in the arm64 defconfig
> >   arm64: kdump: update a kernel doc
> 
> Given that it's nearly -rc7, holiday in the US and more acks needed, we
> should defer merging this series to 4.11. In the meantime, since Will is
> going to handle the 4.11 merging window, I'm acking the whole series:
> 
> Acked-by: Catalin Marinas <catalin.marinas@arm.com>

Okey doke. I'll keep my eyes peeled for a new version in the new year.

Will

_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

Re: [PATCH v28 9/9] Documentation: dt: chosen properties for arm64 kdump

[Rob Herring]

On Thu, Nov 24, 2016 at 05:14:13PM +0000, Catalin Marinas wrote:
> On Thu, Nov 24, 2016 at 06:59:44PM +0900, AKASHI Takahiro wrote:
> > From: James Morse <james.morse-5wv7dgnIgG8@public.gmane.org>
> > 
> > Add documentation for
> > 	linux,crashkernel-base and crashkernel-size,
> > 	linux,usable-memory-range
> > 	linux,elfcorehdr
> > used by arm64 kdump to decribe the kdump reserved area, and
> > the elfcorehdr's location within it.
> > 
> > Signed-off-by: James Morse <james.morse-5wv7dgnIgG8@public.gmane.org>
> > [takahiro.akashi-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org: added "linux,crashkernel-base" and "-size" ]
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> > Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> > Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> > Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
> 
> Rob, Mark, are you ok with this patch?

I'm leaving this one to Mark.

Rob

[PATCH v28 9/9] Documentation: dt: chosen properties for arm64 kdump

[Rob Herring]

On Thu, Nov 24, 2016 at 05:14:13PM +0000, Catalin Marinas wrote:
> On Thu, Nov 24, 2016 at 06:59:44PM +0900, AKASHI Takahiro wrote:
> > From: James Morse <james.morse@arm.com>
> > 
> > Add documentation for
> > 	linux,crashkernel-base and crashkernel-size,
> > 	linux,usable-memory-range
> > 	linux,elfcorehdr
> > used by arm64 kdump to decribe the kdump reserved area, and
> > the elfcorehdr's location within it.
> > 
> > Signed-off-by: James Morse <james.morse@arm.com>
> > [takahiro.akashi at linaro.org: added "linux,crashkernel-base" and "-size" ]
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> > Cc: devicetree at vger.kernel.org
> > Cc: Rob Herring <robh+dt@kernel.org>
> > Cc: Mark Rutland <mark.rutland@arm.com>
> 
> Rob, Mark, are you ok with this patch?

I'm leaving this one to Mark.

Rob

Re: [PATCH v28 9/9] Documentation: dt: chosen properties for arm64 kdump

[Rob Herring]

On Thu, Nov 24, 2016 at 05:14:13PM +0000, Catalin Marinas wrote:
> On Thu, Nov 24, 2016 at 06:59:44PM +0900, AKASHI Takahiro wrote:
> > From: James Morse <james.morse@arm.com>
> > 
> > Add documentation for
> > 	linux,crashkernel-base and crashkernel-size,
> > 	linux,usable-memory-range
> > 	linux,elfcorehdr
> > used by arm64 kdump to decribe the kdump reserved area, and
> > the elfcorehdr's location within it.
> > 
> > Signed-off-by: James Morse <james.morse@arm.com>
> > [takahiro.akashi@linaro.org: added "linux,crashkernel-base" and "-size" ]
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> > Cc: devicetree@vger.kernel.org
> > Cc: Rob Herring <robh+dt@kernel.org>
> > Cc: Mark Rutland <mark.rutland@arm.com>
> 
> Rob, Mark, are you ok with this patch?

I'm leaving this one to Mark.

Rob

_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec