* [U-Boot] [PATCH 0/5] ti_armv7_common: env: Add support for loading FIT images
@ 2016-11-29 6:27 Lokesh Vutla
2016-11-29 6:27 ` [U-Boot] [PATCH 1/5] ti_armv7_common: env: Consolidate support for loading images from mmc Lokesh Vutla
` (4 more replies)
0 siblings, 5 replies; 16+ messages in thread
From: Lokesh Vutla @ 2016-11-29 6:27 UTC (permalink / raw)
To: u-boot
This series adds env support for loading FIT images on TI platforms and
making it as default on HS platforms.
Lokesh Vutla (5):
ti_armv7_common: env: Consolidate support for loading images from mmc
ti_armv7_common: env: Add support for loading FIT images
ARM: DRA7: Make FIT boot as default boot on HS devices
ARM: AM57xx: Make FIT boot as default boot on HS devices
ARM: AMx3xx: Make FIT boot as default boot on HS devices
board/ti/am335x/board.c | 7 +++++++
board/ti/am43xx/board.c | 7 +++++++
board/ti/am57xx/board.c | 8 ++++++++
board/ti/dra7xx/evm.c | 7 +++++++
include/configs/am335x_evm.h | 29 ++++-----------------------
include/configs/am43xx_evm.h | 18 ++++-------------
include/configs/ti_armv7_common.h | 41 ++++++++++++++++++++++++++++++++++++++-
include/configs/ti_omap4_common.h | 12 ++++--------
include/configs/ti_omap5_common.h | 19 ++++--------------
9 files changed, 85 insertions(+), 63 deletions(-)
--
2.10.1
^ permalink raw reply [flat|nested] 16+ messages in thread
* [U-Boot] [PATCH 1/5] ti_armv7_common: env: Consolidate support for loading images from mmc
2016-11-29 6:27 [U-Boot] [PATCH 0/5] ti_armv7_common: env: Add support for loading FIT images Lokesh Vutla
@ 2016-11-29 6:27 ` Lokesh Vutla
2016-11-29 18:03 ` Tom Rini
2016-12-04 0:45 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-29 6:28 ` [U-Boot] [PATCH 2/5] ti_armv7_common: env: Add support for loading FIT images Lokesh Vutla
` (3 subsequent siblings)
4 siblings, 2 replies; 16+ messages in thread
From: Lokesh Vutla @ 2016-11-29 6:27 UTC (permalink / raw)
To: u-boot
Support for loading images from mmc is duplicated in all TI platforms.
Add this information to DEFAULT_MMC_TI_ARGS so that it can be reused
in all TI platforms.
Reviewed-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
include/configs/am335x_evm.h | 25 -------------------------
include/configs/am43xx_evm.h | 14 --------------
include/configs/ti_armv7_common.h | 28 +++++++++++++++++++++++++++-
include/configs/ti_omap4_common.h | 8 --------
include/configs/ti_omap5_common.h | 15 ---------------
5 files changed, 27 insertions(+), 63 deletions(-)
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 8fa8e39..7f5bee9 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -101,7 +101,6 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
- "boot_fdt=try\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
"bootfile=zImage\0" \
@@ -127,30 +126,6 @@
"root=${ramroot} " \
"rootfstype=${ramrootfstype}\0" \
"loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
- "mmcloados=run args_mmc; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
- "bootz ${loadaddr} - ${fdtaddr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootz; " \
- "fi;\0" \
- "mmcboot=mmc dev ${mmcdev}; " \
- "if mmc rescan; then " \
- "echo SD/MMC found on device ${mmcdev};" \
- "run envboot; " \
- "if run loadimage; then " \
- "run mmcloados;" \
- "fi;" \
- "fi;\0" \
"spiboot=echo Booting from spi ...; " \
"run spiargs; " \
"sf probe ${spibusno}:0; " \
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 0a6c06a..abfa852 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -229,20 +229,6 @@
"root=${ramroot} " \
"rootfstype=${ramrootfstype}\0" \
"loadramdisk=load ${devtype} ${devnum} ${rdaddr} ramdisk.gz\0" \
- "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
- "loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
- "mmcboot=mmc dev ${mmcdev}; " \
- "setenv devnum ${mmcdev}; " \
- "setenv devtype mmc; " \
- "if mmc rescan; then " \
- "echo SD/MMC found on device ${devnum};" \
- "if run loadimage; then " \
- "run loadfdt; " \
- "echo Booting from mmc${mmcdev} ...; " \
- "run args_mmc; " \
- "bootz ${loadaddr} - ${fdtaddr}; " \
- "fi;" \
- "fi;\0" \
"usbboot=" \
"setenv devnum ${usbdev}; " \
"setenv devtype usb; " \
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 3e4d3fa..d720b2b 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -54,7 +54,8 @@
"ramdisk_addr_r=0x88080000\0" \
"scriptaddr=0x80000000\0" \
"pxefile_addr_r=0x80100000\0" \
- "bootm_size=0x10000000\0"
+ "bootm_size=0x10000000\0" \
+ "boot_fdt=try\0"
#define DEFAULT_MMC_TI_ARGS \
"mmcdev=0\0" \
@@ -71,6 +72,8 @@
"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
"env import -t ${loadaddr} ${filesize}\0" \
"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}\0" \
+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+ "loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
"envboot=mmc dev ${mmcdev}; " \
"if mmc rescan; then " \
"echo SD/MMC found on device ${mmcdev};" \
@@ -87,6 +90,29 @@
"fi;" \
"fi;" \
"fi;\0" \
+ "mmcloados=run args_mmc; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if run loadfdt; then " \
+ "bootz ${loadaddr} - ${fdtaddr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootz; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootz; " \
+ "fi;\0" \
+ "mmcboot=mmc dev ${mmcdev}; " \
+ "setenv devnum ${mmcdev}; " \
+ "setenv devtype mmc; " \
+ "if mmc rescan; then " \
+ "echo SD/MMC found on device ${mmcdev};" \
+ "if run loadimage; then " \
+ "run mmcloados;" \
+ "fi;" \
+ "fi;\0" \
/*
* DDR information. If the CONFIG_NR_DRAM_BANKS is not defined,
diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
index aa17c09..ce9d3e8 100644
--- a/include/configs/ti_omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -114,14 +114,7 @@
"bootfile=zImage\0" \
"usbtty=cdc_acm\0" \
"vram=16M\0" \
- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
"loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \
- "mmcboot=echo Booting from mmc${mmcdev} ...; " \
- "run args_mmc; " \
- "if run loadimage; then " \
- "run loadfdt; " \
- "bootz ${loadaddr} - ${fdtaddr}; " \
- "fi;\0" \
"uimageboot=echo Booting from mmc${mmcdev} ...; " \
"run args_mmc; " \
"bootm ${loadaddr}\0" \
@@ -138,7 +131,6 @@
"setenv fdtfile omap4-duovero-parlor.dtb; fi;" \
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree to use; fi; \0" \
- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
BOOTENV
/*
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
index 86e5464..90ead56 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -75,20 +75,6 @@
"partitions=" PARTS_DEFAULT "\0" \
"optargs=\0" \
"dofastboot=0\0" \
- "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
- "source ${loadaddr}\0" \
- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
- "mmcboot=mmc dev ${mmcdev}; " \
- "if mmc rescan; then " \
- "echo SD/MMC found on device ${mmcdev};" \
- "if run loadimage; then " \
- "run loadfdt; " \
- "echo Booting from mmc${mmcdev} ...; " \
- "run args_mmc; " \
- "bootz ${loadaddr} - ${fdtaddr}; " \
- "fi;" \
- "fi;\0" \
"findfdt="\
"if test $board_name = omap5_uevm; then " \
"setenv fdtfile omap5-uevm.dtb; fi; " \
@@ -114,7 +100,6 @@
"setenv fdtfile am571x-idk.dtb; fi;" \
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree to use; fi; \0" \
- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
DFUARGS \
NETARGS \
--
2.10.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [U-Boot] [PATCH 2/5] ti_armv7_common: env: Add support for loading FIT images
2016-11-29 6:27 [U-Boot] [PATCH 0/5] ti_armv7_common: env: Add support for loading FIT images Lokesh Vutla
2016-11-29 6:27 ` [U-Boot] [PATCH 1/5] ti_armv7_common: env: Consolidate support for loading images from mmc Lokesh Vutla
@ 2016-11-29 6:28 ` Lokesh Vutla
2016-11-29 18:03 ` Tom Rini
2016-12-04 0:45 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-29 6:28 ` [U-Boot] [PATCH 3/5] ARM: DRA7: Make FIT boot as default boot on HS devices Lokesh Vutla
` (2 subsequent siblings)
4 siblings, 2 replies; 16+ messages in thread
From: Lokesh Vutla @ 2016-11-29 6:28 UTC (permalink / raw)
To: u-boot
FIT is a new image format which is a Tree like structure and gives more
flexibility in handling of various images. Mainly used for unification of
multiple images in a single blob and provide security information for each
image.
U-Boot already has support for loading such images, so adding the environment
support to load FIT image on all TI platforms.
Reviewed-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
include/configs/am335x_evm.h | 4 ++++
include/configs/am43xx_evm.h | 4 ++++
include/configs/ti_armv7_common.h | 15 ++++++++++++++-
include/configs/ti_omap4_common.h | 4 ++++
include/configs/ti_omap5_common.h | 4 ++++
5 files changed, 30 insertions(+), 1 deletion(-)
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 7f5bee9..59f838a 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -90,6 +90,9 @@
func(DHCP, dhcp, na)
#define CONFIG_BOOTCOMMAND \
+ "if test ${boot_fit} -eq 1; then " \
+ "run update_to_fit;" \
+ "fi;" \
"run findfdt; " \
"run init_console; " \
"run envboot; " \
@@ -101,6 +104,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
+ DEFAULT_FIT_TI_ARGS \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
"bootfile=zImage\0" \
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index abfa852..a04cc76 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -206,6 +206,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
+ DEFAULT_FIT_TI_ARGS \
"fdtfile=undefined\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
@@ -269,6 +270,9 @@
DFUARGS \
#define CONFIG_BOOTCOMMAND \
+ "if test ${boot_fit} -eq 1; then " \
+ "run update_to_fit;" \
+ "fi;" \
"run findfdt; " \
"run envboot;" \
"run mmcboot;" \
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index d720b2b..d13fc94 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -110,10 +110,23 @@
"if mmc rescan; then " \
"echo SD/MMC found on device ${mmcdev};" \
"if run loadimage; then " \
- "run mmcloados;" \
+ "if test ${boot_fit} -eq 1; then " \
+ "run loadfit; " \
+ "else " \
+ "run mmcloados;" \
+ "fi;" \
"fi;" \
"fi;\0" \
+#define DEFAULT_FIT_TI_ARGS \
+ "boot_fit=0\0" \
+ "fit_loadaddr=0x88000000\0" \
+ "fit_bootfile=fitImage.itb\0" \
+ "update_to_fit=setenv loadaddr ${fit_loadaddr}; setenv bootfile ${fit_bootfile}\0" \
+ "args_fit=setenv bootargs console=${console} \0" \
+ "loadfit=run args_fit; bootm ${loadaddr}:kernel at 1 " \
+ "${loadaddr}:ramdisk at 1 ${loadaddr}:${fdtfile};\0" \
+
/*
* DDR information. If the CONFIG_NR_DRAM_BANKS is not defined,
* we say (for simplicity) that we have 1 bank, always, even when
diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
index ce9d3e8..8e0f9eb 100644
--- a/include/configs/ti_omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -98,6 +98,9 @@
func(DHCP, dhcp, na)
#define CONFIG_BOOTCOMMAND \
+ "if test ${boot_fit} -eq 1; then " \
+ "run update_to_fit;" \
+ "fi;" \
"run findfdt; " \
"run envboot; " \
"run distro_bootcmd"
@@ -107,6 +110,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
+ DEFAULT_FIT_TI_ARGS \
"console=ttyO2,115200n8\0" \
"fdtfile=undefined\0" \
"bootpart=0:2\0" \
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
index 90ead56..37d6565 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -65,6 +65,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
+ DEFAULT_FIT_TI_ARGS \
"console=" CONSOLEDEV ",115200n8\0" \
"fdtfile=undefined\0" \
"bootpart=0:2\0" \
@@ -110,6 +111,9 @@
"echo Booting into fastboot ...; " \
"fastboot " __stringify(CONFIG_FASTBOOT_USB_DEV) "; " \
"fi;" \
+ "if test ${boot_fit} -eq 1; then " \
+ "run update_to_fit;" \
+ "fi;" \
"run findfdt; " \
"run envboot; " \
"run mmcboot;" \
--
2.10.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [U-Boot] [PATCH 3/5] ARM: DRA7: Make FIT boot as default boot on HS devices
2016-11-29 6:27 [U-Boot] [PATCH 0/5] ti_armv7_common: env: Add support for loading FIT images Lokesh Vutla
2016-11-29 6:27 ` [U-Boot] [PATCH 1/5] ti_armv7_common: env: Consolidate support for loading images from mmc Lokesh Vutla
2016-11-29 6:28 ` [U-Boot] [PATCH 2/5] ti_armv7_common: env: Add support for loading FIT images Lokesh Vutla
@ 2016-11-29 6:28 ` Lokesh Vutla
2016-11-29 18:04 ` Tom Rini
2016-12-04 0:46 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-29 6:28 ` [U-Boot] [PATCH 4/5] ARM: AM57xx: " Lokesh Vutla
2016-11-29 6:28 ` [U-Boot] [PATCH 5/5] ARM: AMx3xx: " Lokesh Vutla
4 siblings, 2 replies; 16+ messages in thread
From: Lokesh Vutla @ 2016-11-29 6:28 UTC (permalink / raw)
To: u-boot
Verification has to be done before booting any images on HS devices. So
default the boot to FIT on HS devices.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
board/ti/dra7xx/evm.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 6d352e6..f932ae9 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -530,6 +530,13 @@ int board_late_init(void)
set_board_info_env(name);
+ /*
+ * Default FIT boot on HS devices. Non FIT images are not allowed
+ * on HS devices.
+ */
+ if (get_device_type() == HS_DEVICE)
+ setenv("boot_fit", "1");
+
omap_die_id_serial();
#endif
return 0;
--
2.10.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [U-Boot] [PATCH 4/5] ARM: AM57xx: Make FIT boot as default boot on HS devices
2016-11-29 6:27 [U-Boot] [PATCH 0/5] ti_armv7_common: env: Add support for loading FIT images Lokesh Vutla
` (2 preceding siblings ...)
2016-11-29 6:28 ` [U-Boot] [PATCH 3/5] ARM: DRA7: Make FIT boot as default boot on HS devices Lokesh Vutla
@ 2016-11-29 6:28 ` Lokesh Vutla
2016-11-29 18:04 ` Tom Rini
2016-12-04 0:47 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-29 6:28 ` [U-Boot] [PATCH 5/5] ARM: AMx3xx: " Lokesh Vutla
4 siblings, 2 replies; 16+ messages in thread
From: Lokesh Vutla @ 2016-11-29 6:28 UTC (permalink / raw)
To: u-boot
Verification has to be done before booting any images on HS devices. So
default the boot to FIT on HS devices.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
board/ti/am57xx/board.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 226752e..c63c693 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -463,6 +463,14 @@ int board_late_init(void)
* This is the POWERHOLD-in-Low behavior.
*/
palmas_i2c_write_u8(TPS65903X_CHIP_P1, 0xA0, 0x1);
+
+ /*
+ * Default FIT boot on HS devices. Non FIT images are not allowed
+ * on HS devices.
+ */
+ if (get_device_type() == HS_DEVICE)
+ setenv("boot_fit", "1");
+
return 0;
}
--
2.10.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [U-Boot] [PATCH 5/5] ARM: AMx3xx: Make FIT boot as default boot on HS devices
2016-11-29 6:27 [U-Boot] [PATCH 0/5] ti_armv7_common: env: Add support for loading FIT images Lokesh Vutla
` (3 preceding siblings ...)
2016-11-29 6:28 ` [U-Boot] [PATCH 4/5] ARM: AM57xx: " Lokesh Vutla
@ 2016-11-29 6:28 ` Lokesh Vutla
2016-11-29 18:04 ` Tom Rini
2016-12-04 0:48 ` [U-Boot] [U-Boot, " Tom Rini
4 siblings, 2 replies; 16+ messages in thread
From: Lokesh Vutla @ 2016-11-29 6:28 UTC (permalink / raw)
To: u-boot
Verification has to be done before booting any images on HS devices. So
default the boot to FIT on HS devices.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
board/ti/am335x/board.c | 7 +++++++
board/ti/am43xx/board.c | 7 +++++++
2 files changed, 14 insertions(+)
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index da9eab4..111ed35 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -639,6 +639,13 @@ int board_late_init(void)
if (board_is_bbg1())
name = "BBG1";
set_board_info_env(name);
+
+ /*
+ * Default FIT boot on HS devices. Non FIT images are not allowed
+ * on HS devices.
+ */
+ if (get_device_type() == HS_DEVICE)
+ setenv("boot_fit", "1");
#endif
#if !defined(CONFIG_SPL_BUILD)
diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index ba6f88f..390cc16 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -632,6 +632,13 @@ int board_late_init(void)
{
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
set_board_info_env(NULL);
+
+ /*
+ * Default FIT boot on HS devices. Non FIT images are not allowed
+ * on HS devices.
+ */
+ if (get_device_type() == HS_DEVICE)
+ setenv("boot_fit", "1");
#endif
return 0;
}
--
2.10.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [U-Boot] [PATCH 1/5] ti_armv7_common: env: Consolidate support for loading images from mmc
2016-11-29 6:27 ` [U-Boot] [PATCH 1/5] ti_armv7_common: env: Consolidate support for loading images from mmc Lokesh Vutla
@ 2016-11-29 18:03 ` Tom Rini
2016-12-04 0:45 ` [U-Boot] [U-Boot, " Tom Rini
1 sibling, 0 replies; 16+ messages in thread
From: Tom Rini @ 2016-11-29 18:03 UTC (permalink / raw)
To: u-boot
On Tue, Nov 29, 2016 at 11:57:59AM +0530, Lokesh Vutla wrote:
> Support for loading images from mmc is duplicated in all TI platforms.
> Add this information to DEFAULT_MMC_TI_ARGS so that it can be reused
> in all TI platforms.
>
> Reviewed-by: Andrew F. Davis <afd@ti.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161129/a38f91e0/attachment.sig>
^ permalink raw reply [flat|nested] 16+ messages in thread
* [U-Boot] [PATCH 2/5] ti_armv7_common: env: Add support for loading FIT images
2016-11-29 6:28 ` [U-Boot] [PATCH 2/5] ti_armv7_common: env: Add support for loading FIT images Lokesh Vutla
@ 2016-11-29 18:03 ` Tom Rini
2016-12-04 0:45 ` [U-Boot] [U-Boot, " Tom Rini
1 sibling, 0 replies; 16+ messages in thread
From: Tom Rini @ 2016-11-29 18:03 UTC (permalink / raw)
To: u-boot
On Tue, Nov 29, 2016 at 11:58:00AM +0530, Lokesh Vutla wrote:
> FIT is a new image format which is a Tree like structure and gives more
> flexibility in handling of various images. Mainly used for unification of
> multiple images in a single blob and provide security information for each
> image.
>
> U-Boot already has support for loading such images, so adding the environment
> support to load FIT image on all TI platforms.
>
> Reviewed-by: Andrew F. Davis <afd@ti.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161129/23c9fb35/attachment.sig>
^ permalink raw reply [flat|nested] 16+ messages in thread
* [U-Boot] [PATCH 3/5] ARM: DRA7: Make FIT boot as default boot on HS devices
2016-11-29 6:28 ` [U-Boot] [PATCH 3/5] ARM: DRA7: Make FIT boot as default boot on HS devices Lokesh Vutla
@ 2016-11-29 18:04 ` Tom Rini
2016-12-04 0:46 ` [U-Boot] [U-Boot, " Tom Rini
1 sibling, 0 replies; 16+ messages in thread
From: Tom Rini @ 2016-11-29 18:04 UTC (permalink / raw)
To: u-boot
On Tue, Nov 29, 2016 at 11:58:01AM +0530, Lokesh Vutla wrote:
> Verification has to be done before booting any images on HS devices. So
> default the boot to FIT on HS devices.
>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161129/3d1f822b/attachment.sig>
^ permalink raw reply [flat|nested] 16+ messages in thread
* [U-Boot] [PATCH 4/5] ARM: AM57xx: Make FIT boot as default boot on HS devices
2016-11-29 6:28 ` [U-Boot] [PATCH 4/5] ARM: AM57xx: " Lokesh Vutla
@ 2016-11-29 18:04 ` Tom Rini
2016-12-04 0:47 ` [U-Boot] [U-Boot, " Tom Rini
1 sibling, 0 replies; 16+ messages in thread
From: Tom Rini @ 2016-11-29 18:04 UTC (permalink / raw)
To: u-boot
On Tue, Nov 29, 2016 at 11:58:02AM +0530, Lokesh Vutla wrote:
> Verification has to be done before booting any images on HS devices. So
> default the boot to FIT on HS devices.
>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161129/ad759215/attachment.sig>
^ permalink raw reply [flat|nested] 16+ messages in thread
* [U-Boot] [PATCH 5/5] ARM: AMx3xx: Make FIT boot as default boot on HS devices
2016-11-29 6:28 ` [U-Boot] [PATCH 5/5] ARM: AMx3xx: " Lokesh Vutla
@ 2016-11-29 18:04 ` Tom Rini
2016-12-04 0:48 ` [U-Boot] [U-Boot, " Tom Rini
1 sibling, 0 replies; 16+ messages in thread
From: Tom Rini @ 2016-11-29 18:04 UTC (permalink / raw)
To: u-boot
On Tue, Nov 29, 2016 at 11:58:03AM +0530, Lokesh Vutla wrote:
> Verification has to be done before booting any images on HS devices. So
> default the boot to FIT on HS devices.
>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161129/f44ad7e7/attachment.sig>
^ permalink raw reply [flat|nested] 16+ messages in thread
* [U-Boot] [U-Boot, 1/5] ti_armv7_common: env: Consolidate support for loading images from mmc
2016-11-29 6:27 ` [U-Boot] [PATCH 1/5] ti_armv7_common: env: Consolidate support for loading images from mmc Lokesh Vutla
2016-11-29 18:03 ` Tom Rini
@ 2016-12-04 0:45 ` Tom Rini
1 sibling, 0 replies; 16+ messages in thread
From: Tom Rini @ 2016-12-04 0:45 UTC (permalink / raw)
To: u-boot
On Tue, Nov 29, 2016 at 11:57:59AM +0530, Lokesh Vutla wrote:
> Support for loading images from mmc is duplicated in all TI platforms.
> Add this information to DEFAULT_MMC_TI_ARGS so that it can be reused
> in all TI platforms.
>
> Reviewed-by: Andrew F. Davis <afd@ti.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161203/6c2ac308/attachment.sig>
^ permalink raw reply [flat|nested] 16+ messages in thread
* [U-Boot] [U-Boot, 2/5] ti_armv7_common: env: Add support for loading FIT images
2016-11-29 6:28 ` [U-Boot] [PATCH 2/5] ti_armv7_common: env: Add support for loading FIT images Lokesh Vutla
2016-11-29 18:03 ` Tom Rini
@ 2016-12-04 0:45 ` Tom Rini
1 sibling, 0 replies; 16+ messages in thread
From: Tom Rini @ 2016-12-04 0:45 UTC (permalink / raw)
To: u-boot
On Tue, Nov 29, 2016 at 11:58:00AM +0530, Lokesh Vutla wrote:
> FIT is a new image format which is a Tree like structure and gives more
> flexibility in handling of various images. Mainly used for unification of
> multiple images in a single blob and provide security information for each
> image.
>
> U-Boot already has support for loading such images, so adding the environment
> support to load FIT image on all TI platforms.
>
> Reviewed-by: Andrew F. Davis <afd@ti.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161203/63cfcb6d/attachment.sig>
^ permalink raw reply [flat|nested] 16+ messages in thread
* [U-Boot] [U-Boot, 3/5] ARM: DRA7: Make FIT boot as default boot on HS devices
2016-11-29 6:28 ` [U-Boot] [PATCH 3/5] ARM: DRA7: Make FIT boot as default boot on HS devices Lokesh Vutla
2016-11-29 18:04 ` Tom Rini
@ 2016-12-04 0:46 ` Tom Rini
1 sibling, 0 replies; 16+ messages in thread
From: Tom Rini @ 2016-12-04 0:46 UTC (permalink / raw)
To: u-boot
On Tue, Nov 29, 2016 at 11:58:01AM +0530, Lokesh Vutla wrote:
> Verification has to be done before booting any images on HS devices. So
> default the boot to FIT on HS devices.
>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161203/b27cf974/attachment.sig>
^ permalink raw reply [flat|nested] 16+ messages in thread
* [U-Boot] [U-Boot, 4/5] ARM: AM57xx: Make FIT boot as default boot on HS devices
2016-11-29 6:28 ` [U-Boot] [PATCH 4/5] ARM: AM57xx: " Lokesh Vutla
2016-11-29 18:04 ` Tom Rini
@ 2016-12-04 0:47 ` Tom Rini
1 sibling, 0 replies; 16+ messages in thread
From: Tom Rini @ 2016-12-04 0:47 UTC (permalink / raw)
To: u-boot
On Tue, Nov 29, 2016 at 11:58:02AM +0530, Lokesh Vutla wrote:
> Verification has to be done before booting any images on HS devices. So
> default the boot to FIT on HS devices.
>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161203/357c3585/attachment.sig>
^ permalink raw reply [flat|nested] 16+ messages in thread
* [U-Boot] [U-Boot, 5/5] ARM: AMx3xx: Make FIT boot as default boot on HS devices
2016-11-29 6:28 ` [U-Boot] [PATCH 5/5] ARM: AMx3xx: " Lokesh Vutla
2016-11-29 18:04 ` Tom Rini
@ 2016-12-04 0:48 ` Tom Rini
1 sibling, 0 replies; 16+ messages in thread
From: Tom Rini @ 2016-12-04 0:48 UTC (permalink / raw)
To: u-boot
On Tue, Nov 29, 2016 at 11:58:03AM +0530, Lokesh Vutla wrote:
> Verification has to be done before booting any images on HS devices. So
> default the boot to FIT on HS devices.
>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161203/56998782/attachment.sig>
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2016-12-04 0:48 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-11-29 6:27 [U-Boot] [PATCH 0/5] ti_armv7_common: env: Add support for loading FIT images Lokesh Vutla
2016-11-29 6:27 ` [U-Boot] [PATCH 1/5] ti_armv7_common: env: Consolidate support for loading images from mmc Lokesh Vutla
2016-11-29 18:03 ` Tom Rini
2016-12-04 0:45 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-29 6:28 ` [U-Boot] [PATCH 2/5] ti_armv7_common: env: Add support for loading FIT images Lokesh Vutla
2016-11-29 18:03 ` Tom Rini
2016-12-04 0:45 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-29 6:28 ` [U-Boot] [PATCH 3/5] ARM: DRA7: Make FIT boot as default boot on HS devices Lokesh Vutla
2016-11-29 18:04 ` Tom Rini
2016-12-04 0:46 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-29 6:28 ` [U-Boot] [PATCH 4/5] ARM: AM57xx: " Lokesh Vutla
2016-11-29 18:04 ` Tom Rini
2016-12-04 0:47 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-29 6:28 ` [U-Boot] [PATCH 5/5] ARM: AMx3xx: " Lokesh Vutla
2016-11-29 18:04 ` Tom Rini
2016-12-04 0:48 ` [U-Boot] [U-Boot, " Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.