[PATCH v4 0/9] STM32F4 missing clocks

[PATCH v4 0/9] STM32F4 missing clocks

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

v4:
 - Fix post divider for lcd (replace CLK_DIVIDER_POWER_OF_TWO flage by a divider table)
 - Allow posibility to change parent of SAI clocks.
 - Use common definition file for STM32Fx clocks.

v3:
 - restructure the patch series to have only one patch for all bindings changes.
   (clk: stm32f4: Update DT bindings documentation)

v2:
 - Put post divider in config structure
 - Rework patch-set
    - add update dt binding documentation
    - add clock definition file
 - Use composite for pll vco clocks
 - For auxiliary clock, allow the possiblity to enable peripheral
   clocks at same time (sugested by radek)
 - Add vco_in clock (entry frequency for all pll) to simplify the code and clarify clock tree
 - Fix missing end of divider tables

This patch-set adds:
 - I2S & SAI PLLs
 - SDIO & 48 Mhz clocks
 - LCD-TFT clock
 - I2S & SAI clocks

Gabriel Fernandez (9):
  clk: stm32f4: Update DT bindings documentation
  clk: stm32f4: Add PLL_I2S & PLL_SAI for STM32F429/469 boards
  clk: stm32f4: Add post divisor for I2S & SAI PLLs
  clk: stm32f4: Add lcd-tft clock
  clk: stm32f4: Add I2S clock
  clk: stm32f4: Add SAI clocks
  clk: stm32f4: SDIO & 48Mhz clock management for STM32F469 board
  ARM: dts: stm32f4: Add external I2S clock
  ARM: dts: stm32f4: Include auxiliary stm32fx clock definition

 .../devicetree/bindings/clock/st,stm32-rcc.txt     |  17 +
 arch/arm/boot/dts/stm32f429.dtsi                   |   9 +-
 drivers/clk/clk-stm32f4.c                          | 595 ++++++++++++++++++++-
 include/dt-bindings/clock/stm32fx-clock.h          |  39 ++
 4 files changed, 640 insertions(+), 20 deletions(-)
 create mode 100644 include/dt-bindings/clock/stm32fx-clock.h

-- 
1.9.1

[PATCH v4 0/9] STM32F4 missing clocks

[gabriel.fernandez at st.com]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

v4:
 - Fix post divider for lcd (replace CLK_DIVIDER_POWER_OF_TWO flage by a divider table)
 - Allow posibility to change parent of SAI clocks.
 - Use common definition file for STM32Fx clocks.

v3:
 - restructure the patch series to have only one patch for all bindings changes.
   (clk: stm32f4: Update DT bindings documentation)

v2:
 - Put post divider in config structure
 - Rework patch-set
    - add update dt binding documentation
    - add clock definition file
 - Use composite for pll vco clocks
 - For auxiliary clock, allow the possiblity to enable peripheral
   clocks at same time (sugested by radek)
 - Add vco_in clock (entry frequency for all pll) to simplify the code and clarify clock tree
 - Fix missing end of divider tables

This patch-set adds:
 - I2S & SAI PLLs
 - SDIO & 48 Mhz clocks
 - LCD-TFT clock
 - I2S & SAI clocks

Gabriel Fernandez (9):
  clk: stm32f4: Update DT bindings documentation
  clk: stm32f4: Add PLL_I2S & PLL_SAI for STM32F429/469 boards
  clk: stm32f4: Add post divisor for I2S & SAI PLLs
  clk: stm32f4: Add lcd-tft clock
  clk: stm32f4: Add I2S clock
  clk: stm32f4: Add SAI clocks
  clk: stm32f4: SDIO & 48Mhz clock management for STM32F469 board
  ARM: dts: stm32f4: Add external I2S clock
  ARM: dts: stm32f4: Include auxiliary stm32fx clock definition

 .../devicetree/bindings/clock/st,stm32-rcc.txt     |  17 +
 arch/arm/boot/dts/stm32f429.dtsi                   |   9 +-
 drivers/clk/clk-stm32f4.c                          | 595 ++++++++++++++++++++-
 include/dt-bindings/clock/stm32fx-clock.h          |  39 ++
 4 files changed, 640 insertions(+), 20 deletions(-)
 create mode 100644 include/dt-bindings/clock/stm32fx-clock.h

-- 
1.9.1

[PATCH v4 0/9] STM32F4 missing clocks

[gabriel.fernandez-qxv4g6HH51o]

From: Gabriel Fernandez <gabriel.fernandez-qxv4g6HH51o@public.gmane.org>

v4:
 - Fix post divider for lcd (replace CLK_DIVIDER_POWER_OF_TWO flage by a divider table)
 - Allow posibility to change parent of SAI clocks.
 - Use common definition file for STM32Fx clocks.

v3:
 - restructure the patch series to have only one patch for all bindings changes.
   (clk: stm32f4: Update DT bindings documentation)

v2:
 - Put post divider in config structure
 - Rework patch-set
    - add update dt binding documentation
    - add clock definition file
 - Use composite for pll vco clocks
 - For auxiliary clock, allow the possiblity to enable peripheral
   clocks at same time (sugested by radek)
 - Add vco_in clock (entry frequency for all pll) to simplify the code and clarify clock tree
 - Fix missing end of divider tables

This patch-set adds:
 - I2S & SAI PLLs
 - SDIO & 48 Mhz clocks
 - LCD-TFT clock
 - I2S & SAI clocks

Gabriel Fernandez (9):
  clk: stm32f4: Update DT bindings documentation
  clk: stm32f4: Add PLL_I2S & PLL_SAI for STM32F429/469 boards
  clk: stm32f4: Add post divisor for I2S & SAI PLLs
  clk: stm32f4: Add lcd-tft clock
  clk: stm32f4: Add I2S clock
  clk: stm32f4: Add SAI clocks
  clk: stm32f4: SDIO & 48Mhz clock management for STM32F469 board
  ARM: dts: stm32f4: Add external I2S clock
  ARM: dts: stm32f4: Include auxiliary stm32fx clock definition

 .../devicetree/bindings/clock/st,stm32-rcc.txt     |  17 +
 arch/arm/boot/dts/stm32f429.dtsi                   |   9 +-
 drivers/clk/clk-stm32f4.c                          | 595 ++++++++++++++++++++-
 include/dt-bindings/clock/stm32fx-clock.h          |  39 ++
 4 files changed, 640 insertions(+), 20 deletions(-)
 create mode 100644 include/dt-bindings/clock/stm32fx-clock.h

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 1/9] clk: stm32f4: Update DT bindings documentation

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

Creation of dt include file for specific stm32f4 clocks.
These specific clocks are not derived from system clock (SYSCLOCK)
We should use index 1 to use these clocks in DT.
e.g. <&rcc 1 CLK_LSI>

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/clock/st,stm32-rcc.txt     | 17 ++++++++++
 include/dt-bindings/clock/stm32fx-clock.h          | 39 ++++++++++++++++++++++
 2 files changed, 56 insertions(+)
 create mode 100644 include/dt-bindings/clock/stm32fx-clock.h

diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
index 0532d81..8f19d87 100644
--- a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
+++ b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
@@ -17,6 +17,9 @@ Required properties:
   property, containing a phandle to the clock device node, an index selecting
   between gated clocks and other clocks and an index specifying the clock to
   use.
+- clocks: External oscillator clock phandle
+  - high speed external clock signal (HSE)
+  - external I2S clock (I2S_CKIN)
 
 Example:
 
@@ -25,6 +28,7 @@ Example:
 		#clock-cells = <2>
 		compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
 		reg = <0x40023800 0x400>;
+		clocks = <&clk_hse>, <&clk_i2s_ckin>;
 	};
 
 Specifying gated clocks
@@ -66,6 +70,19 @@ The secondary index is bound with the following magic numbers:
 
 	0	SYSTICK
 	1	FCLK
+	2	CLK_LSI		(low-power clock source)
+	3	CLK_LSE		(generated from a 32.768 kHz low-speed external
+				 crystal or ceramic resonator)
+	4	CLK_HSE_RTC	(HSE division factor for RTC clock)
+	5	CLK_RTC		(real-time clock)
+	6	PLL_VCO_I2S	(vco frequency of I2S pll)
+	7	PLL_VCO_SAI	(vco frequency of SAI pll)
+	8	CLK_LCD		(LCD-TFT)
+	9	CLK_I2S		(I2S clocks)
+	10	CLK_SAI1	(audio clocks)
+	11	CLK_SAI2
+	12	CLK_I2SQ_PDIV	(post divisor of pll i2s q divisor)
+	13	CLK_SAIQ_PDIV	(post divisor of pll sai q divisor)
 
 Example:
 
diff --git a/include/dt-bindings/clock/stm32fx-clock.h b/include/dt-bindings/clock/stm32fx-clock.h
new file mode 100644
index 0000000..08bcab6
--- /dev/null
+++ b/include/dt-bindings/clock/stm32fx-clock.h
@@ -0,0 +1,39 @@
+/*
+ * stm32fx-clock.h
+ *
+ * Copyright (C) 2016 STMicroelectronics
+ * Author: Gabriel Fernandez for STMicroelectronics.
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+/*
+ * List of clocks wich are not derived from system clock (SYSCLOCK)
+ *
+ * The index of these clocks is the secondary index of DT bindings
+ * (see Documentatoin/devicetree/bindings/clock/st,stm32-rcc.txt)
+ *
+ * e.g:
+	<assigned-clocks = <&rcc 1 CLK_LSE>;
+*/
+
+#ifndef _DT_BINDINGS_CLK_STMFX_H
+#define _DT_BINDINGS_CLK_STMFX_H
+
+#define SYSTICK			0
+#define FCLK			1
+#define CLK_LSI			2
+#define CLK_LSE			3
+#define CLK_HSE_RTC		4
+#define CLK_RTC			5
+#define PLL_VCO_I2S		6
+#define PLL_VCO_SAI		7
+#define CLK_LCD			8
+#define CLK_I2S			9
+#define CLK_SAI1		10
+#define CLK_SAI2		11
+#define CLK_I2SQ_PDIV		12
+#define CLK_SAIQ_PDIV		13
+
+#define END_PRIMARY_CLK		14
+
+#endif
-- 
1.9.1

[PATCH v4 1/9] clk: stm32f4: Update DT bindings documentation

[gabriel.fernandez at st.com]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

Creation of dt include file for specific stm32f4 clocks.
These specific clocks are not derived from system clock (SYSCLOCK)
We should use index 1 to use these clocks in DT.
e.g. <&rcc 1 CLK_LSI>

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/clock/st,stm32-rcc.txt     | 17 ++++++++++
 include/dt-bindings/clock/stm32fx-clock.h          | 39 ++++++++++++++++++++++
 2 files changed, 56 insertions(+)
 create mode 100644 include/dt-bindings/clock/stm32fx-clock.h

diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
index 0532d81..8f19d87 100644
--- a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
+++ b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
@@ -17,6 +17,9 @@ Required properties:
   property, containing a phandle to the clock device node, an index selecting
   between gated clocks and other clocks and an index specifying the clock to
   use.
+- clocks: External oscillator clock phandle
+  - high speed external clock signal (HSE)
+  - external I2S clock (I2S_CKIN)
 
 Example:
 
@@ -25,6 +28,7 @@ Example:
 		#clock-cells = <2>
 		compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
 		reg = <0x40023800 0x400>;
+		clocks = <&clk_hse>, <&clk_i2s_ckin>;
 	};
 
 Specifying gated clocks
@@ -66,6 +70,19 @@ The secondary index is bound with the following magic numbers:
 
 	0	SYSTICK
 	1	FCLK
+	2	CLK_LSI		(low-power clock source)
+	3	CLK_LSE		(generated from a 32.768 kHz low-speed external
+				 crystal or ceramic resonator)
+	4	CLK_HSE_RTC	(HSE division factor for RTC clock)
+	5	CLK_RTC		(real-time clock)
+	6	PLL_VCO_I2S	(vco frequency of I2S pll)
+	7	PLL_VCO_SAI	(vco frequency of SAI pll)
+	8	CLK_LCD		(LCD-TFT)
+	9	CLK_I2S		(I2S clocks)
+	10	CLK_SAI1	(audio clocks)
+	11	CLK_SAI2
+	12	CLK_I2SQ_PDIV	(post divisor of pll i2s q divisor)
+	13	CLK_SAIQ_PDIV	(post divisor of pll sai q divisor)
 
 Example:
 
diff --git a/include/dt-bindings/clock/stm32fx-clock.h b/include/dt-bindings/clock/stm32fx-clock.h
new file mode 100644
index 0000000..08bcab6
--- /dev/null
+++ b/include/dt-bindings/clock/stm32fx-clock.h
@@ -0,0 +1,39 @@
+/*
+ * stm32fx-clock.h
+ *
+ * Copyright (C) 2016 STMicroelectronics
+ * Author: Gabriel Fernandez for STMicroelectronics.
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+/*
+ * List of clocks wich are not derived from system clock (SYSCLOCK)
+ *
+ * The index of these clocks is the secondary index of DT bindings
+ * (see Documentatoin/devicetree/bindings/clock/st,stm32-rcc.txt)
+ *
+ * e.g:
+	<assigned-clocks = <&rcc 1 CLK_LSE>;
+*/
+
+#ifndef _DT_BINDINGS_CLK_STMFX_H
+#define _DT_BINDINGS_CLK_STMFX_H
+
+#define SYSTICK			0
+#define FCLK			1
+#define CLK_LSI			2
+#define CLK_LSE			3
+#define CLK_HSE_RTC		4
+#define CLK_RTC			5
+#define PLL_VCO_I2S		6
+#define PLL_VCO_SAI		7
+#define CLK_LCD			8
+#define CLK_I2S			9
+#define CLK_SAI1		10
+#define CLK_SAI2		11
+#define CLK_I2SQ_PDIV		12
+#define CLK_SAIQ_PDIV		13
+
+#define END_PRIMARY_CLK		14
+
+#endif
-- 
1.9.1

[PATCH v4 1/9] clk: stm32f4: Update DT bindings documentation

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

Creation of dt include file for specific stm32f4 clocks.
These specific clocks are not derived from system clock (SYSCLOCK)
We should use index 1 to use these clocks in DT.
e.g. <&rcc 1 CLK_LSI>

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/clock/st,stm32-rcc.txt     | 17 ++++++++++
 include/dt-bindings/clock/stm32fx-clock.h          | 39 ++++++++++++++++++++++
 2 files changed, 56 insertions(+)
 create mode 100644 include/dt-bindings/clock/stm32fx-clock.h

diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
index 0532d81..8f19d87 100644
--- a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
+++ b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
@@ -17,6 +17,9 @@ Required properties:
   property, containing a phandle to the clock device node, an index selecting
   between gated clocks and other clocks and an index specifying the clock to
   use.
+- clocks: External oscillator clock phandle
+  - high speed external clock signal (HSE)
+  - external I2S clock (I2S_CKIN)
 
 Example:
 
@@ -25,6 +28,7 @@ Example:
 		#clock-cells = <2>
 		compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
 		reg = <0x40023800 0x400>;
+		clocks = <&clk_hse>, <&clk_i2s_ckin>;
 	};
 
 Specifying gated clocks
@@ -66,6 +70,19 @@ The secondary index is bound with the following magic numbers:
 
 	0	SYSTICK
 	1	FCLK
+	2	CLK_LSI		(low-power clock source)
+	3	CLK_LSE		(generated from a 32.768 kHz low-speed external
+				 crystal or ceramic resonator)
+	4	CLK_HSE_RTC	(HSE division factor for RTC clock)
+	5	CLK_RTC		(real-time clock)
+	6	PLL_VCO_I2S	(vco frequency of I2S pll)
+	7	PLL_VCO_SAI	(vco frequency of SAI pll)
+	8	CLK_LCD		(LCD-TFT)
+	9	CLK_I2S		(I2S clocks)
+	10	CLK_SAI1	(audio clocks)
+	11	CLK_SAI2
+	12	CLK_I2SQ_PDIV	(post divisor of pll i2s q divisor)
+	13	CLK_SAIQ_PDIV	(post divisor of pll sai q divisor)
 
 Example:
 
diff --git a/include/dt-bindings/clock/stm32fx-clock.h b/include/dt-bindings/clock/stm32fx-clock.h
new file mode 100644
index 0000000..08bcab6
--- /dev/null
+++ b/include/dt-bindings/clock/stm32fx-clock.h
@@ -0,0 +1,39 @@
+/*
+ * stm32fx-clock.h
+ *
+ * Copyright (C) 2016 STMicroelectronics
+ * Author: Gabriel Fernandez for STMicroelectronics.
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+/*
+ * List of clocks wich are not derived from system clock (SYSCLOCK)
+ *
+ * The index of these clocks is the secondary index of DT bindings
+ * (see Documentatoin/devicetree/bindings/clock/st,stm32-rcc.txt)
+ *
+ * e.g:
+	<assigned-clocks = <&rcc 1 CLK_LSE>;
+*/
+
+#ifndef _DT_BINDINGS_CLK_STMFX_H
+#define _DT_BINDINGS_CLK_STMFX_H
+
+#define SYSTICK			0
+#define FCLK			1
+#define CLK_LSI			2
+#define CLK_LSE			3
+#define CLK_HSE_RTC		4
+#define CLK_RTC			5
+#define PLL_VCO_I2S		6
+#define PLL_VCO_SAI		7
+#define CLK_LCD			8
+#define CLK_I2S			9
+#define CLK_SAI1		10
+#define CLK_SAI2		11
+#define CLK_I2SQ_PDIV		12
+#define CLK_SAIQ_PDIV		13
+
+#define END_PRIMARY_CLK		14
+
+#endif
-- 
1.9.1

Re: [PATCH v4 1/9] clk: stm32f4: Update DT bindings documentation

[Stephen Boyd]

On 12/13, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> Creation of dt include file for specific stm32f4 clocks.
> These specific clocks are not derived from system clock (SYSCLOCK)
> We should use index 1 to use these clocks in DT.
> e.g. <&rcc 1 CLK_LSI>
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> Acked-by: Rob Herring <robh@kernel.org>
> ---

Applied to clk-stm32f4 and merged into clk-next.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v4 1/9] clk: stm32f4: Update DT bindings documentation

[Stephen Boyd]

On 12/13, gabriel.fernandez at st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> Creation of dt include file for specific stm32f4 clocks.
> These specific clocks are not derived from system clock (SYSCLOCK)
> We should use index 1 to use these clocks in DT.
> e.g. <&rcc 1 CLK_LSI>
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> Acked-by: Rob Herring <robh@kernel.org>
> ---

Applied to clk-stm32f4 and merged into clk-next.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v4 1/9] clk: stm32f4: Update DT bindings documentation

[Alexandre Torgue]

Hi Stephen,

On 12/22/2016 01:10 AM, Stephen Boyd wrote:
> On 12/13, gabriel.fernandez@st.com wrote:
>> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>>
>> Creation of dt include file for specific stm32f4 clocks.
>> These specific clocks are not derived from system clock (SYSCLOCK)
>> We should use index 1 to use these clocks in DT.
>> e.g. <&rcc 1 CLK_LSI>
>>
>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
>> Acked-by: Rob Herring <robh@kernel.org>
>> ---
>
> Applied to clk-stm32f4 and merged into clk-next.
>

I'm preparing pull request branch for STM32 DT part. This patch is also 
requested to build correctly DT patches. Do you know how could we 
synchronize our pull request ?

Thanks
Alex

[PATCH v4 1/9] clk: stm32f4: Update DT bindings documentation

[Alexandre Torgue]

Hi Stephen,

On 12/22/2016 01:10 AM, Stephen Boyd wrote:
> On 12/13, gabriel.fernandez at st.com wrote:
>> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>>
>> Creation of dt include file for specific stm32f4 clocks.
>> These specific clocks are not derived from system clock (SYSCLOCK)
>> We should use index 1 to use these clocks in DT.
>> e.g. <&rcc 1 CLK_LSI>
>>
>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
>> Acked-by: Rob Herring <robh@kernel.org>
>> ---
>
> Applied to clk-stm32f4 and merged into clk-next.
>

I'm preparing pull request branch for STM32 DT part. This patch is also 
requested to build correctly DT patches. Do you know how could we 
synchronize our pull request ?

Thanks
Alex

Re: [PATCH v4 1/9] clk: stm32f4: Update DT bindings documentation

[Alexandre Torgue]

Hi Stephen,

On 12/22/2016 01:10 AM, Stephen Boyd wrote:
> On 12/13, gabriel.fernandez@st.com wrote:
>> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>>
>> Creation of dt include file for specific stm32f4 clocks.
>> These specific clocks are not derived from system clock (SYSCLOCK)
>> We should use index 1 to use these clocks in DT.
>> e.g. <&rcc 1 CLK_LSI>
>>
>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
>> Acked-by: Rob Herring <robh@kernel.org>
>> ---
>
> Applied to clk-stm32f4 and merged into clk-next.
>

I'm preparing pull request branch for STM32 DT part. This patch is also 
requested to build correctly DT patches. Do you know how could we 
synchronize our pull request ?

Thanks
Alex

Re: [PATCH v4 1/9] clk: stm32f4: Update DT bindings documentation

[Alexandre Torgue]

Hi Stephen,

On 12/22/2016 01:10 AM, Stephen Boyd wrote:
> On 12/13, gabriel.fernandez@st.com wrote:
>> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>>
>> Creation of dt include file for specific stm32f4 clocks.
>> These specific clocks are not derived from system clock (SYSCLOCK)
>> We should use index 1 to use these clocks in DT.
>> e.g. <&rcc 1 CLK_LSI>
>>
>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
>> Acked-by: Rob Herring <robh@kernel.org>
>> ---
>
> Applied to clk-stm32f4 and merged into clk-next.
>

I'm preparing pull request branch for STM32 DT part. This patch is also 
requested to build correctly DT patches. Do you know how could we 
synchronize our pull request ?

Thanks
Alex

Re: [PATCH v4 1/9] clk: stm32f4: Update DT bindings documentation

[Stephen Boyd]

On 01/09, Alexandre Torgue wrote:
> Hi Stephen,
> 
> On 12/22/2016 01:10 AM, Stephen Boyd wrote:
> >On 12/13, gabriel.fernandez@st.com wrote:
> >>From: Gabriel Fernandez <gabriel.fernandez@st.com>
> >>
> >>Creation of dt include file for specific stm32f4 clocks.
> >>These specific clocks are not derived from system clock (SYSCLOCK)
> >>We should use index 1 to use these clocks in DT.
> >>e.g. <&rcc 1 CLK_LSI>
> >>
> >>Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> >>Acked-by: Rob Herring <robh@kernel.org>
> >>---
> >
> >Applied to clk-stm32f4 and merged into clk-next.
> >
> 
> I'm preparing pull request branch for STM32 DT part. This patch is
> also requested to build correctly DT patches. Do you know how could
> we synchronize our pull request ?
> 

clk-stm32f4 is stable and not going to be rebased, so you're good
to base patches on it and send it off to arm-soc if the arm-soc
maintainers agree to it. You can also base off an earlier part of
the branch if you only need this first patch for example.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v4 1/9] clk: stm32f4: Update DT bindings documentation

[Stephen Boyd]

On 01/09, Alexandre Torgue wrote:
> Hi Stephen,
> 
> On 12/22/2016 01:10 AM, Stephen Boyd wrote:
> >On 12/13, gabriel.fernandez at st.com wrote:
> >>From: Gabriel Fernandez <gabriel.fernandez@st.com>
> >>
> >>Creation of dt include file for specific stm32f4 clocks.
> >>These specific clocks are not derived from system clock (SYSCLOCK)
> >>We should use index 1 to use these clocks in DT.
> >>e.g. <&rcc 1 CLK_LSI>
> >>
> >>Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> >>Acked-by: Rob Herring <robh@kernel.org>
> >>---
> >
> >Applied to clk-stm32f4 and merged into clk-next.
> >
> 
> I'm preparing pull request branch for STM32 DT part. This patch is
> also requested to build correctly DT patches. Do you know how could
> we synchronize our pull request ?
> 

clk-stm32f4 is stable and not going to be rebased, so you're good
to base patches on it and send it off to arm-soc if the arm-soc
maintainers agree to it. You can also base off an earlier part of
the branch if you only need this first patch for example.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v4 1/9] clk: stm32f4: Update DT bindings documentation

[Stephen Boyd]

On 01/09, Alexandre Torgue wrote:
> Hi Stephen,
> 
> On 12/22/2016 01:10 AM, Stephen Boyd wrote:
> >On 12/13, gabriel.fernandez@st.com wrote:
> >>From: Gabriel Fernandez <gabriel.fernandez@st.com>
> >>
> >>Creation of dt include file for specific stm32f4 clocks.
> >>These specific clocks are not derived from system clock (SYSCLOCK)
> >>We should use index 1 to use these clocks in DT.
> >>e.g. <&rcc 1 CLK_LSI>
> >>
> >>Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> >>Acked-by: Rob Herring <robh@kernel.org>
> >>---
> >
> >Applied to clk-stm32f4 and merged into clk-next.
> >
> 
> I'm preparing pull request branch for STM32 DT part. This patch is
> also requested to build correctly DT patches. Do you know how could
> we synchronize our pull request ?
> 

clk-stm32f4 is stable and not going to be rebased, so you're good
to base patches on it and send it off to arm-soc if the arm-soc
maintainers agree to it. You can also base off an earlier part of
the branch if you only need this first patch for example.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v4 1/9] clk: stm32f4: Update DT bindings documentation

[Stephen Boyd]

On 01/09, Alexandre Torgue wrote:
> Hi Stephen,
> 
> On 12/22/2016 01:10 AM, Stephen Boyd wrote:
> >On 12/13, gabriel.fernandez@st.com wrote:
> >>From: Gabriel Fernandez <gabriel.fernandez@st.com>
> >>
> >>Creation of dt include file for specific stm32f4 clocks.
> >>These specific clocks are not derived from system clock (SYSCLOCK)
> >>We should use index 1 to use these clocks in DT.
> >>e.g. <&rcc 1 CLK_LSI>
> >>
> >>Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> >>Acked-by: Rob Herring <robh@kernel.org>
> >>---
> >
> >Applied to clk-stm32f4 and merged into clk-next.
> >
> 
> I'm preparing pull request branch for STM32 DT part. This patch is
> also requested to build correctly DT patches. Do you know how could
> we synchronize our pull request ?
> 

clk-stm32f4 is stable and not going to be rebased, so you're good
to base patches on it and send it off to arm-soc if the arm-soc
maintainers agree to it. You can also base off an earlier part of
the branch if you only need this first patch for example.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v4 1/9] clk: stm32f4: Update DT bindings documentation

[Alexandre Torgue]

On 01/09/2017 08:33 PM, Stephen Boyd wrote:
> On 01/09, Alexandre Torgue wrote:
>> Hi Stephen,
>>
>> On 12/22/2016 01:10 AM, Stephen Boyd wrote:
>>> On 12/13, gabriel.fernandez@st.com wrote:
>>>> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>>>>
>>>> Creation of dt include file for specific stm32f4 clocks.
>>>> These specific clocks are not derived from system clock (SYSCLOCK)
>>>> We should use index 1 to use these clocks in DT.
>>>> e.g. <&rcc 1 CLK_LSI>
>>>>
>>>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
>>>> Acked-by: Rob Herring <robh@kernel.org>
>>>> ---
>>>
>>> Applied to clk-stm32f4 and merged into clk-next.
>>>
>>
>> I'm preparing pull request branch for STM32 DT part. This patch is
>> also requested to build correctly DT patches. Do you know how could
>> we synchronize our pull request ?
>>
>
> clk-stm32f4 is stable and not going to be rebased, so you're good
> to base patches on it and send it off to arm-soc if the arm-soc
> maintainers agree to it. You can also base off an earlier part of
> the branch if you only need this first patch for example.
>
I will base my DT branch from 4.10-rc1 + this commit (seen with Arnd)

Thanks

[PATCH v4 1/9] clk: stm32f4: Update DT bindings documentation

[Alexandre Torgue]

On 01/09/2017 08:33 PM, Stephen Boyd wrote:
> On 01/09, Alexandre Torgue wrote:
>> Hi Stephen,
>>
>> On 12/22/2016 01:10 AM, Stephen Boyd wrote:
>>> On 12/13, gabriel.fernandez at st.com wrote:
>>>> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>>>>
>>>> Creation of dt include file for specific stm32f4 clocks.
>>>> These specific clocks are not derived from system clock (SYSCLOCK)
>>>> We should use index 1 to use these clocks in DT.
>>>> e.g. <&rcc 1 CLK_LSI>
>>>>
>>>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
>>>> Acked-by: Rob Herring <robh@kernel.org>
>>>> ---
>>>
>>> Applied to clk-stm32f4 and merged into clk-next.
>>>
>>
>> I'm preparing pull request branch for STM32 DT part. This patch is
>> also requested to build correctly DT patches. Do you know how could
>> we synchronize our pull request ?
>>
>
> clk-stm32f4 is stable and not going to be rebased, so you're good
> to base patches on it and send it off to arm-soc if the arm-soc
> maintainers agree to it. You can also base off an earlier part of
> the branch if you only need this first patch for example.
>
I will base my DT branch from 4.10-rc1 + this commit (seen with Arnd)

Thanks

Re: [PATCH v4 1/9] clk: stm32f4: Update DT bindings documentation

[Alexandre Torgue]

On 01/09/2017 08:33 PM, Stephen Boyd wrote:
> On 01/09, Alexandre Torgue wrote:
>> Hi Stephen,
>>
>> On 12/22/2016 01:10 AM, Stephen Boyd wrote:
>>> On 12/13, gabriel.fernandez@st.com wrote:
>>>> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>>>>
>>>> Creation of dt include file for specific stm32f4 clocks.
>>>> These specific clocks are not derived from system clock (SYSCLOCK)
>>>> We should use index 1 to use these clocks in DT.
>>>> e.g. <&rcc 1 CLK_LSI>
>>>>
>>>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
>>>> Acked-by: Rob Herring <robh@kernel.org>
>>>> ---
>>>
>>> Applied to clk-stm32f4 and merged into clk-next.
>>>
>>
>> I'm preparing pull request branch for STM32 DT part. This patch is
>> also requested to build correctly DT patches. Do you know how could
>> we synchronize our pull request ?
>>
>
> clk-stm32f4 is stable and not going to be rebased, so you're good
> to base patches on it and send it off to arm-soc if the arm-soc
> maintainers agree to it. You can also base off an earlier part of
> the branch if you only need this first patch for example.
>
I will base my DT branch from 4.10-rc1 + this commit (seen with Arnd)

Thanks

Re: [PATCH v4 1/9] clk: stm32f4: Update DT bindings documentation

[Alexandre Torgue]

On 01/09/2017 08:33 PM, Stephen Boyd wrote:
> On 01/09, Alexandre Torgue wrote:
>> Hi Stephen,
>>
>> On 12/22/2016 01:10 AM, Stephen Boyd wrote:
>>> On 12/13, gabriel.fernandez@st.com wrote:
>>>> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>>>>
>>>> Creation of dt include file for specific stm32f4 clocks.
>>>> These specific clocks are not derived from system clock (SYSCLOCK)
>>>> We should use index 1 to use these clocks in DT.
>>>> e.g. <&rcc 1 CLK_LSI>
>>>>
>>>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
>>>> Acked-by: Rob Herring <robh@kernel.org>
>>>> ---
>>>
>>> Applied to clk-stm32f4 and merged into clk-next.
>>>
>>
>> I'm preparing pull request branch for STM32 DT part. This patch is
>> also requested to build correctly DT patches. Do you know how could
>> we synchronize our pull request ?
>>
>
> clk-stm32f4 is stable and not going to be rebased, so you're good
> to base patches on it and send it off to arm-soc if the arm-soc
> maintainers agree to it. You can also base off an earlier part of
> the branch if you only need this first patch for example.
>
I will base my DT branch from 4.10-rc1 + this commit (seen with Arnd)

Thanks

[PATCH v4 2/9] clk: stm32f4: Add PLL_I2S & PLL_SAI for STM32F429/469 boards

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch introduces PLL_I2S and PLL_SAI.
Vco clock of these PLLs can be modify by DT (only n multiplicator,
m divider is still fixed by the boot-loader).
Each PLL has 3 dividers. PLL should be off when we modify the rate.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 drivers/clk/clk-stm32f4.c | 351 +++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 334 insertions(+), 17 deletions(-)

diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index 5eb05db..cab2014 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -28,6 +28,14 @@
 #include <linux/regmap.h>
 #include <linux/mfd/syscon.h>
 
+/*
+ * Include list of clocks wich are not derived from system clock (SYSCLOCK)
+ * The index of these clocks is the secondary index of DT bindings
+ *
+ */
+#include <dt-bindings/clock/stm32fx-clock.h>
+
+#define STM32F4_RCC_CR			0x00
 #define STM32F4_RCC_PLLCFGR		0x04
 #define STM32F4_RCC_CFGR		0x08
 #define STM32F4_RCC_AHB1ENR		0x30
@@ -37,6 +45,8 @@
 #define STM32F4_RCC_APB2ENR		0x44
 #define STM32F4_RCC_BDCR		0x70
 #define STM32F4_RCC_CSR			0x74
+#define STM32F4_RCC_PLLI2SCFGR		0x84
+#define STM32F4_RCC_PLLSAICFGR		0x88
 
 struct stm32f4_gate_data {
 	u8	offset;
@@ -208,8 +218,6 @@ struct stm32f4_gate_data {
 	{ STM32F4_RCC_APB2ENR, 26,	"ltdc",		"apb2_div" },
 };
 
-enum { SYSTICK, FCLK, CLK_LSI, CLK_LSE, CLK_HSE_RTC, CLK_RTC, END_PRIMARY_CLK };
-
 /*
  * This bitmask tells us which bit offsets (0..192) on STM32F4[23]xxx
  * have gate bits associated with them. Its combined hweight is 71.
@@ -324,23 +332,312 @@ static struct clk *clk_register_apb_mul(struct device *dev, const char *name,
 	return clk;
 }
 
-/*
- * Decode current PLL state and (statically) model the state we inherit from
- * the bootloader.
- */
-static void stm32f4_rcc_register_pll(const char *hse_clk, const char *hsi_clk)
+enum {
+	PLL,
+	PLL_I2S,
+	PLL_SAI,
+};
+
+static const struct clk_div_table pll_divp_table[] = {
+	{ 0, 2 }, { 1, 4 }, { 2, 6 }, { 3, 8 }, { 0 }
+};
+
+static const struct clk_div_table pll_divr_table[] = {
+	{ 2, 2 }, { 3, 3 }, { 4, 4 }, { 5, 5 }, { 6, 6 }, { 7, 7 }, { 0 }
+};
+
+struct stm32f4_pll {
+	spinlock_t *lock;
+	struct	clk_gate gate;
+	u8 offset;
+	u8 bit_rdy_idx;
+	u8 status;
+	u8 n_start;
+};
+
+#define to_stm32f4_pll(_gate) container_of(_gate, struct stm32f4_pll, gate)
+
+struct stm32f4_vco_data {
+	const char *vco_name;
+	u8 offset;
+	u8 bit_idx;
+	u8 bit_rdy_idx;
+};
+
+static const struct stm32f4_vco_data  vco_data[] = {
+	{ "vco",     STM32F4_RCC_PLLCFGR,    24, 25 },
+	{ "vco-i2s", STM32F4_RCC_PLLI2SCFGR, 26, 27 },
+	{ "vco-sai", STM32F4_RCC_PLLSAICFGR, 28, 29 },
+};
+
+struct stm32f4_div_data {
+	u8 shift;
+	u8 width;
+	u8 flag_div;
+	const struct clk_div_table *div_table;
+};
+
+#define MAX_PLL_DIV 3
+static const struct stm32f4_div_data  div_data[MAX_PLL_DIV] = {
+	{ 16, 2, 0,			pll_divp_table	},
+	{ 24, 4, CLK_DIVIDER_ONE_BASED, NULL		},
+	{ 28, 3, 0,			pll_divr_table	},
+};
+
+struct stm32f4_pll_data {
+	u8 pll_num;
+	u8 n_start;
+	const char *div_name[MAX_PLL_DIV];
+};
+
+static const struct stm32f4_pll_data stm32f429_pll[MAX_PLL_DIV] = {
+	{ PLL,	   192, { "pll", "pll48",    NULL	} },
+	{ PLL_I2S, 192, { NULL,  "plli2s-q", "plli2s-r" } },
+	{ PLL_SAI,  49, { NULL,  "pllsai-q", "pllsai-r" } },
+};
+
+static const struct stm32f4_pll_data stm32f469_pll[MAX_PLL_DIV] = {
+	{ PLL,	   50, { "pll",	     "pll-q",    NULL	    } },
+	{ PLL_I2S, 50, { "plli2s-p", "plli2s-q", "plli2s-r" } },
+	{ PLL_SAI, 50, { "pllsai-p", "pllsai-q", "pllsai-r" } },
+};
+
+static int stm32f4_pll_is_enabled(struct clk_hw *hw)
+{
+	return clk_gate_ops.is_enabled(hw);
+}
+
+static int stm32f4_pll_enable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	struct stm32f4_pll *pll = to_stm32f4_pll(gate);
+	int ret = 0;
+	unsigned long reg;
+
+	ret = clk_gate_ops.enable(hw);
+
+	ret = readl_relaxed_poll_timeout_atomic(base + STM32F4_RCC_CR, reg,
+			reg & (1 << pll->bit_rdy_idx), 0, 10000);
+
+	return ret;
+}
+
+static void stm32f4_pll_disable(struct clk_hw *hw)
+{
+	clk_gate_ops.disable(hw);
+}
+
+static unsigned long stm32f4_pll_recalc(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	struct stm32f4_pll *pll = to_stm32f4_pll(gate);
+	unsigned long n;
+
+	n = (readl(base + pll->offset) >> 6) & 0x1ff;
+
+	return parent_rate * n;
+}
+
+static long stm32f4_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long *prate)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	struct stm32f4_pll *pll = to_stm32f4_pll(gate);
+	unsigned long n;
+
+	n = rate / *prate;
+
+	if (n < pll->n_start)
+		n = pll->n_start;
+	else if (n > 432)
+		n = 432;
+
+	return *prate * n;
+}
+
+static int stm32f4_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	struct stm32f4_pll *pll = to_stm32f4_pll(gate);
+
+	unsigned long n;
+	unsigned long val;
+	int pll_state;
+
+	pll_state = stm32f4_pll_is_enabled(hw);
+
+	if (pll_state)
+		stm32f4_pll_disable(hw);
+
+	n = rate  / parent_rate;
+
+	val = readl(base + pll->offset) & ~(0x1ff << 6);
+
+	writel(val | ((n & 0x1ff) <<  6), base + pll->offset);
+
+	if (pll_state)
+		stm32f4_pll_enable(hw);
+
+	return 0;
+}
+
+static const struct clk_ops stm32f4_pll_gate_ops = {
+	.enable		= stm32f4_pll_enable,
+	.disable	= stm32f4_pll_disable,
+	.is_enabled	= stm32f4_pll_is_enabled,
+	.recalc_rate	= stm32f4_pll_recalc,
+	.round_rate	= stm32f4_pll_round_rate,
+	.set_rate	= stm32f4_pll_set_rate,
+};
+
+struct stm32f4_pll_div {
+	struct clk_divider div;
+	struct clk_hw *hw_pll;
+};
+
+#define to_pll_div_clk(_div) container_of(_div, struct stm32f4_pll_div, div)
+
+static unsigned long stm32f4_pll_div_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	return clk_divider_ops.recalc_rate(hw, parent_rate);
+}
+
+static long stm32f4_pll_div_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	return clk_divider_ops.round_rate(hw, rate, prate);
+}
+
+static int stm32f4_pll_div_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	int pll_state, ret;
+
+	struct clk_divider *div = to_clk_divider(hw);
+	struct stm32f4_pll_div *pll_div = to_pll_div_clk(div);
+
+	pll_state = stm32f4_pll_is_enabled(pll_div->hw_pll);
+
+	if (pll_state)
+		stm32f4_pll_disable(pll_div->hw_pll);
+
+	ret = clk_divider_ops.set_rate(hw, rate, parent_rate);
+
+	if (pll_state)
+		stm32f4_pll_enable(pll_div->hw_pll);
+
+	return ret;
+}
+
+const struct clk_ops stm32f4_pll_div_ops = {
+	.recalc_rate = stm32f4_pll_div_recalc_rate,
+	.round_rate = stm32f4_pll_div_round_rate,
+	.set_rate = stm32f4_pll_div_set_rate,
+};
+
+static struct clk_hw *clk_register_pll_div(const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 shift, u8 width,
+		u8 clk_divider_flags, const struct clk_div_table *table,
+		struct clk_hw *pll_hw, spinlock_t *lock)
 {
-	unsigned long pllcfgr = readl(base + STM32F4_RCC_PLLCFGR);
+	struct stm32f4_pll_div *pll_div;
+	struct clk_hw *hw;
+	struct clk_init_data init;
+	int ret;
+
+	/* allocate the divider */
+	pll_div = kzalloc(sizeof(*pll_div), GFP_KERNEL);
+	if (!pll_div)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &stm32f4_pll_div_ops;
+	init.flags = flags;
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
+	/* struct clk_divider assignments */
+	pll_div->div.reg = reg;
+	pll_div->div.shift = shift;
+	pll_div->div.width = width;
+	pll_div->div.flags = clk_divider_flags;
+	pll_div->div.lock = lock;
+	pll_div->div.table = table;
+	pll_div->div.hw.init = &init;
+
+	pll_div->hw_pll = pll_hw;
+
+	/* register the clock */
+	hw = &pll_div->div.hw;
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(pll_div);
+		hw = ERR_PTR(ret);
+	}
+
+	return hw;
+}
+
+static struct clk_hw *stm32f4_rcc_register_pll(const char *pllsrc,
+		const struct stm32f4_pll_data *data,  spinlock_t *lock)
+{
+	struct stm32f4_pll *pll;
+	struct clk_init_data init = { NULL };
+	void __iomem *reg;
+	struct clk_hw *pll_hw;
+	int ret;
+	int i;
+	const struct stm32f4_vco_data *vco;
+
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	vco = &vco_data[data->pll_num];
+
+	init.name = vco->vco_name;
+	init.ops = &stm32f4_pll_gate_ops;
+	init.flags = CLK_SET_RATE_GATE;
+	init.parent_names = &pllsrc;
+	init.num_parents = 1;
+
+	pll->gate.lock = lock;
+	pll->gate.reg = base + STM32F4_RCC_CR;
+	pll->gate.bit_idx = vco->bit_idx;
+	pll->gate.hw.init = &init;
+
+	pll->offset = vco->offset;
+	pll->n_start = data->n_start;
+	pll->bit_rdy_idx = vco->bit_rdy_idx;
+	pll->status = (readl(base + STM32F4_RCC_CR) >> vco->bit_idx) & 0x1;
 
-	unsigned long pllm   = pllcfgr & 0x3f;
-	unsigned long plln   = (pllcfgr >> 6) & 0x1ff;
-	unsigned long pllp   = BIT(((pllcfgr >> 16) & 3) + 1);
-	const char   *pllsrc = pllcfgr & BIT(22) ? hse_clk : hsi_clk;
-	unsigned long pllq   = (pllcfgr >> 24) & 0xf;
+	reg = base + pll->offset;
 
-	clk_register_fixed_factor(NULL, "vco", pllsrc, 0, plln, pllm);
-	clk_register_fixed_factor(NULL, "pll", "vco", 0, 1, pllp);
-	clk_register_fixed_factor(NULL, "pll48", "vco", 0, 1, pllq);
+	pll_hw = &pll->gate.hw;
+	ret = clk_hw_register(NULL, pll_hw);
+	if (ret) {
+		kfree(pll);
+		return ERR_PTR(ret);
+	}
+
+	for (i = 0; i < MAX_PLL_DIV; i++)
+		if (data->div_name[i])
+			clk_register_pll_div(data->div_name[i],
+					vco->vco_name,
+					0,
+					reg,
+					div_data[i].shift,
+					div_data[i].width,
+					div_data[i].flag_div,
+					div_data[i].div_table,
+					pll_hw,
+					lock);
+	return pll_hw;
 }
 
 /*
@@ -615,18 +912,21 @@ struct stm32f4_clk_data {
 	const struct stm32f4_gate_data *gates_data;
 	const u64 *gates_map;
 	int gates_num;
+	const struct stm32f4_pll_data *pll_data;
 };
 
 static const struct stm32f4_clk_data stm32f429_clk_data = {
 	.gates_data	= stm32f429_gates,
 	.gates_map	= stm32f42xx_gate_map,
 	.gates_num	= ARRAY_SIZE(stm32f429_gates),
+	.pll_data	= stm32f429_pll,
 };
 
 static const struct stm32f4_clk_data stm32f469_clk_data = {
 	.gates_data	= stm32f469_gates,
 	.gates_map	= stm32f46xx_gate_map,
 	.gates_num	= ARRAY_SIZE(stm32f469_gates),
+	.pll_data	= stm32f469_pll,
 };
 
 static const struct of_device_id stm32f4_of_match[] = {
@@ -647,6 +947,9 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 	int n;
 	const struct of_device_id *match;
 	const struct stm32f4_clk_data *data;
+	unsigned long pllcfgr;
+	const char *pllsrc;
+	unsigned long pllm;
 
 	base = of_iomap(np, 0);
 	if (!base) {
@@ -677,7 +980,21 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 
 	clk_register_fixed_rate_with_accuracy(NULL, "hsi", NULL, 0,
 			16000000, 160000);
-	stm32f4_rcc_register_pll(hse_clk, "hsi");
+	pllcfgr = readl(base + STM32F4_RCC_PLLCFGR);
+	pllsrc = pllcfgr & BIT(22) ? hse_clk : "hsi";
+	pllm = pllcfgr & 0x3f;
+
+	clk_hw_register_fixed_factor(NULL, "vco_in", pllsrc,
+					       0, 1, pllm);
+
+	stm32f4_rcc_register_pll("vco_in", &data->pll_data[0],
+			&stm32f4_clk_lock);
+
+	clks[PLL_VCO_I2S] = stm32f4_rcc_register_pll("vco_in",
+			&data->pll_data[1], &stm32f4_clk_lock);
+
+	clks[PLL_VCO_SAI] = stm32f4_rcc_register_pll("vco_in",
+			&data->pll_data[2], &stm32f4_clk_lock);
 
 	sys_parents[1] = hse_clk;
 	clk_register_mux_table(
-- 
1.9.1

[PATCH v4 2/9] clk: stm32f4: Add PLL_I2S & PLL_SAI for STM32F429/469 boards

[gabriel.fernandez at st.com]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch introduces PLL_I2S and PLL_SAI.
Vco clock of these PLLs can be modify by DT (only n multiplicator,
m divider is still fixed by the boot-loader).
Each PLL has 3 dividers. PLL should be off when we modify the rate.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 drivers/clk/clk-stm32f4.c | 351 +++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 334 insertions(+), 17 deletions(-)

diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index 5eb05db..cab2014 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -28,6 +28,14 @@
 #include <linux/regmap.h>
 #include <linux/mfd/syscon.h>
 
+/*
+ * Include list of clocks wich are not derived from system clock (SYSCLOCK)
+ * The index of these clocks is the secondary index of DT bindings
+ *
+ */
+#include <dt-bindings/clock/stm32fx-clock.h>
+
+#define STM32F4_RCC_CR			0x00
 #define STM32F4_RCC_PLLCFGR		0x04
 #define STM32F4_RCC_CFGR		0x08
 #define STM32F4_RCC_AHB1ENR		0x30
@@ -37,6 +45,8 @@
 #define STM32F4_RCC_APB2ENR		0x44
 #define STM32F4_RCC_BDCR		0x70
 #define STM32F4_RCC_CSR			0x74
+#define STM32F4_RCC_PLLI2SCFGR		0x84
+#define STM32F4_RCC_PLLSAICFGR		0x88
 
 struct stm32f4_gate_data {
 	u8	offset;
@@ -208,8 +218,6 @@ struct stm32f4_gate_data {
 	{ STM32F4_RCC_APB2ENR, 26,	"ltdc",		"apb2_div" },
 };
 
-enum { SYSTICK, FCLK, CLK_LSI, CLK_LSE, CLK_HSE_RTC, CLK_RTC, END_PRIMARY_CLK };
-
 /*
  * This bitmask tells us which bit offsets (0..192) on STM32F4[23]xxx
  * have gate bits associated with them. Its combined hweight is 71.
@@ -324,23 +332,312 @@ static struct clk *clk_register_apb_mul(struct device *dev, const char *name,
 	return clk;
 }
 
-/*
- * Decode current PLL state and (statically) model the state we inherit from
- * the bootloader.
- */
-static void stm32f4_rcc_register_pll(const char *hse_clk, const char *hsi_clk)
+enum {
+	PLL,
+	PLL_I2S,
+	PLL_SAI,
+};
+
+static const struct clk_div_table pll_divp_table[] = {
+	{ 0, 2 }, { 1, 4 }, { 2, 6 }, { 3, 8 }, { 0 }
+};
+
+static const struct clk_div_table pll_divr_table[] = {
+	{ 2, 2 }, { 3, 3 }, { 4, 4 }, { 5, 5 }, { 6, 6 }, { 7, 7 }, { 0 }
+};
+
+struct stm32f4_pll {
+	spinlock_t *lock;
+	struct	clk_gate gate;
+	u8 offset;
+	u8 bit_rdy_idx;
+	u8 status;
+	u8 n_start;
+};
+
+#define to_stm32f4_pll(_gate) container_of(_gate, struct stm32f4_pll, gate)
+
+struct stm32f4_vco_data {
+	const char *vco_name;
+	u8 offset;
+	u8 bit_idx;
+	u8 bit_rdy_idx;
+};
+
+static const struct stm32f4_vco_data  vco_data[] = {
+	{ "vco",     STM32F4_RCC_PLLCFGR,    24, 25 },
+	{ "vco-i2s", STM32F4_RCC_PLLI2SCFGR, 26, 27 },
+	{ "vco-sai", STM32F4_RCC_PLLSAICFGR, 28, 29 },
+};
+
+struct stm32f4_div_data {
+	u8 shift;
+	u8 width;
+	u8 flag_div;
+	const struct clk_div_table *div_table;
+};
+
+#define MAX_PLL_DIV 3
+static const struct stm32f4_div_data  div_data[MAX_PLL_DIV] = {
+	{ 16, 2, 0,			pll_divp_table	},
+	{ 24, 4, CLK_DIVIDER_ONE_BASED, NULL		},
+	{ 28, 3, 0,			pll_divr_table	},
+};
+
+struct stm32f4_pll_data {
+	u8 pll_num;
+	u8 n_start;
+	const char *div_name[MAX_PLL_DIV];
+};
+
+static const struct stm32f4_pll_data stm32f429_pll[MAX_PLL_DIV] = {
+	{ PLL,	   192, { "pll", "pll48",    NULL	} },
+	{ PLL_I2S, 192, { NULL,  "plli2s-q", "plli2s-r" } },
+	{ PLL_SAI,  49, { NULL,  "pllsai-q", "pllsai-r" } },
+};
+
+static const struct stm32f4_pll_data stm32f469_pll[MAX_PLL_DIV] = {
+	{ PLL,	   50, { "pll",	     "pll-q",    NULL	    } },
+	{ PLL_I2S, 50, { "plli2s-p", "plli2s-q", "plli2s-r" } },
+	{ PLL_SAI, 50, { "pllsai-p", "pllsai-q", "pllsai-r" } },
+};
+
+static int stm32f4_pll_is_enabled(struct clk_hw *hw)
+{
+	return clk_gate_ops.is_enabled(hw);
+}
+
+static int stm32f4_pll_enable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	struct stm32f4_pll *pll = to_stm32f4_pll(gate);
+	int ret = 0;
+	unsigned long reg;
+
+	ret = clk_gate_ops.enable(hw);
+
+	ret = readl_relaxed_poll_timeout_atomic(base + STM32F4_RCC_CR, reg,
+			reg & (1 << pll->bit_rdy_idx), 0, 10000);
+
+	return ret;
+}
+
+static void stm32f4_pll_disable(struct clk_hw *hw)
+{
+	clk_gate_ops.disable(hw);
+}
+
+static unsigned long stm32f4_pll_recalc(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	struct stm32f4_pll *pll = to_stm32f4_pll(gate);
+	unsigned long n;
+
+	n = (readl(base + pll->offset) >> 6) & 0x1ff;
+
+	return parent_rate * n;
+}
+
+static long stm32f4_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long *prate)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	struct stm32f4_pll *pll = to_stm32f4_pll(gate);
+	unsigned long n;
+
+	n = rate / *prate;
+
+	if (n < pll->n_start)
+		n = pll->n_start;
+	else if (n > 432)
+		n = 432;
+
+	return *prate * n;
+}
+
+static int stm32f4_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	struct stm32f4_pll *pll = to_stm32f4_pll(gate);
+
+	unsigned long n;
+	unsigned long val;
+	int pll_state;
+
+	pll_state = stm32f4_pll_is_enabled(hw);
+
+	if (pll_state)
+		stm32f4_pll_disable(hw);
+
+	n = rate  / parent_rate;
+
+	val = readl(base + pll->offset) & ~(0x1ff << 6);
+
+	writel(val | ((n & 0x1ff) <<  6), base + pll->offset);
+
+	if (pll_state)
+		stm32f4_pll_enable(hw);
+
+	return 0;
+}
+
+static const struct clk_ops stm32f4_pll_gate_ops = {
+	.enable		= stm32f4_pll_enable,
+	.disable	= stm32f4_pll_disable,
+	.is_enabled	= stm32f4_pll_is_enabled,
+	.recalc_rate	= stm32f4_pll_recalc,
+	.round_rate	= stm32f4_pll_round_rate,
+	.set_rate	= stm32f4_pll_set_rate,
+};
+
+struct stm32f4_pll_div {
+	struct clk_divider div;
+	struct clk_hw *hw_pll;
+};
+
+#define to_pll_div_clk(_div) container_of(_div, struct stm32f4_pll_div, div)
+
+static unsigned long stm32f4_pll_div_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	return clk_divider_ops.recalc_rate(hw, parent_rate);
+}
+
+static long stm32f4_pll_div_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	return clk_divider_ops.round_rate(hw, rate, prate);
+}
+
+static int stm32f4_pll_div_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	int pll_state, ret;
+
+	struct clk_divider *div = to_clk_divider(hw);
+	struct stm32f4_pll_div *pll_div = to_pll_div_clk(div);
+
+	pll_state = stm32f4_pll_is_enabled(pll_div->hw_pll);
+
+	if (pll_state)
+		stm32f4_pll_disable(pll_div->hw_pll);
+
+	ret = clk_divider_ops.set_rate(hw, rate, parent_rate);
+
+	if (pll_state)
+		stm32f4_pll_enable(pll_div->hw_pll);
+
+	return ret;
+}
+
+const struct clk_ops stm32f4_pll_div_ops = {
+	.recalc_rate = stm32f4_pll_div_recalc_rate,
+	.round_rate = stm32f4_pll_div_round_rate,
+	.set_rate = stm32f4_pll_div_set_rate,
+};
+
+static struct clk_hw *clk_register_pll_div(const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 shift, u8 width,
+		u8 clk_divider_flags, const struct clk_div_table *table,
+		struct clk_hw *pll_hw, spinlock_t *lock)
 {
-	unsigned long pllcfgr = readl(base + STM32F4_RCC_PLLCFGR);
+	struct stm32f4_pll_div *pll_div;
+	struct clk_hw *hw;
+	struct clk_init_data init;
+	int ret;
+
+	/* allocate the divider */
+	pll_div = kzalloc(sizeof(*pll_div), GFP_KERNEL);
+	if (!pll_div)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &stm32f4_pll_div_ops;
+	init.flags = flags;
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
+	/* struct clk_divider assignments */
+	pll_div->div.reg = reg;
+	pll_div->div.shift = shift;
+	pll_div->div.width = width;
+	pll_div->div.flags = clk_divider_flags;
+	pll_div->div.lock = lock;
+	pll_div->div.table = table;
+	pll_div->div.hw.init = &init;
+
+	pll_div->hw_pll = pll_hw;
+
+	/* register the clock */
+	hw = &pll_div->div.hw;
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(pll_div);
+		hw = ERR_PTR(ret);
+	}
+
+	return hw;
+}
+
+static struct clk_hw *stm32f4_rcc_register_pll(const char *pllsrc,
+		const struct stm32f4_pll_data *data,  spinlock_t *lock)
+{
+	struct stm32f4_pll *pll;
+	struct clk_init_data init = { NULL };
+	void __iomem *reg;
+	struct clk_hw *pll_hw;
+	int ret;
+	int i;
+	const struct stm32f4_vco_data *vco;
+
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	vco = &vco_data[data->pll_num];
+
+	init.name = vco->vco_name;
+	init.ops = &stm32f4_pll_gate_ops;
+	init.flags = CLK_SET_RATE_GATE;
+	init.parent_names = &pllsrc;
+	init.num_parents = 1;
+
+	pll->gate.lock = lock;
+	pll->gate.reg = base + STM32F4_RCC_CR;
+	pll->gate.bit_idx = vco->bit_idx;
+	pll->gate.hw.init = &init;
+
+	pll->offset = vco->offset;
+	pll->n_start = data->n_start;
+	pll->bit_rdy_idx = vco->bit_rdy_idx;
+	pll->status = (readl(base + STM32F4_RCC_CR) >> vco->bit_idx) & 0x1;
 
-	unsigned long pllm   = pllcfgr & 0x3f;
-	unsigned long plln   = (pllcfgr >> 6) & 0x1ff;
-	unsigned long pllp   = BIT(((pllcfgr >> 16) & 3) + 1);
-	const char   *pllsrc = pllcfgr & BIT(22) ? hse_clk : hsi_clk;
-	unsigned long pllq   = (pllcfgr >> 24) & 0xf;
+	reg = base + pll->offset;
 
-	clk_register_fixed_factor(NULL, "vco", pllsrc, 0, plln, pllm);
-	clk_register_fixed_factor(NULL, "pll", "vco", 0, 1, pllp);
-	clk_register_fixed_factor(NULL, "pll48", "vco", 0, 1, pllq);
+	pll_hw = &pll->gate.hw;
+	ret = clk_hw_register(NULL, pll_hw);
+	if (ret) {
+		kfree(pll);
+		return ERR_PTR(ret);
+	}
+
+	for (i = 0; i < MAX_PLL_DIV; i++)
+		if (data->div_name[i])
+			clk_register_pll_div(data->div_name[i],
+					vco->vco_name,
+					0,
+					reg,
+					div_data[i].shift,
+					div_data[i].width,
+					div_data[i].flag_div,
+					div_data[i].div_table,
+					pll_hw,
+					lock);
+	return pll_hw;
 }
 
 /*
@@ -615,18 +912,21 @@ struct stm32f4_clk_data {
 	const struct stm32f4_gate_data *gates_data;
 	const u64 *gates_map;
 	int gates_num;
+	const struct stm32f4_pll_data *pll_data;
 };
 
 static const struct stm32f4_clk_data stm32f429_clk_data = {
 	.gates_data	= stm32f429_gates,
 	.gates_map	= stm32f42xx_gate_map,
 	.gates_num	= ARRAY_SIZE(stm32f429_gates),
+	.pll_data	= stm32f429_pll,
 };
 
 static const struct stm32f4_clk_data stm32f469_clk_data = {
 	.gates_data	= stm32f469_gates,
 	.gates_map	= stm32f46xx_gate_map,
 	.gates_num	= ARRAY_SIZE(stm32f469_gates),
+	.pll_data	= stm32f469_pll,
 };
 
 static const struct of_device_id stm32f4_of_match[] = {
@@ -647,6 +947,9 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 	int n;
 	const struct of_device_id *match;
 	const struct stm32f4_clk_data *data;
+	unsigned long pllcfgr;
+	const char *pllsrc;
+	unsigned long pllm;
 
 	base = of_iomap(np, 0);
 	if (!base) {
@@ -677,7 +980,21 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 
 	clk_register_fixed_rate_with_accuracy(NULL, "hsi", NULL, 0,
 			16000000, 160000);
-	stm32f4_rcc_register_pll(hse_clk, "hsi");
+	pllcfgr = readl(base + STM32F4_RCC_PLLCFGR);
+	pllsrc = pllcfgr & BIT(22) ? hse_clk : "hsi";
+	pllm = pllcfgr & 0x3f;
+
+	clk_hw_register_fixed_factor(NULL, "vco_in", pllsrc,
+					       0, 1, pllm);
+
+	stm32f4_rcc_register_pll("vco_in", &data->pll_data[0],
+			&stm32f4_clk_lock);
+
+	clks[PLL_VCO_I2S] = stm32f4_rcc_register_pll("vco_in",
+			&data->pll_data[1], &stm32f4_clk_lock);
+
+	clks[PLL_VCO_SAI] = stm32f4_rcc_register_pll("vco_in",
+			&data->pll_data[2], &stm32f4_clk_lock);
 
 	sys_parents[1] = hse_clk;
 	clk_register_mux_table(
-- 
1.9.1

[PATCH v4 2/9] clk: stm32f4: Add PLL_I2S & PLL_SAI for STM32F429/469 boards

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch introduces PLL_I2S and PLL_SAI.
Vco clock of these PLLs can be modify by DT (only n multiplicator,
m divider is still fixed by the boot-loader).
Each PLL has 3 dividers. PLL should be off when we modify the rate.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 drivers/clk/clk-stm32f4.c | 351 +++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 334 insertions(+), 17 deletions(-)

diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index 5eb05db..cab2014 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -28,6 +28,14 @@
 #include <linux/regmap.h>
 #include <linux/mfd/syscon.h>
 
+/*
+ * Include list of clocks wich are not derived from system clock (SYSCLOCK)
+ * The index of these clocks is the secondary index of DT bindings
+ *
+ */
+#include <dt-bindings/clock/stm32fx-clock.h>
+
+#define STM32F4_RCC_CR			0x00
 #define STM32F4_RCC_PLLCFGR		0x04
 #define STM32F4_RCC_CFGR		0x08
 #define STM32F4_RCC_AHB1ENR		0x30
@@ -37,6 +45,8 @@
 #define STM32F4_RCC_APB2ENR		0x44
 #define STM32F4_RCC_BDCR		0x70
 #define STM32F4_RCC_CSR			0x74
+#define STM32F4_RCC_PLLI2SCFGR		0x84
+#define STM32F4_RCC_PLLSAICFGR		0x88
 
 struct stm32f4_gate_data {
 	u8	offset;
@@ -208,8 +218,6 @@ struct stm32f4_gate_data {
 	{ STM32F4_RCC_APB2ENR, 26,	"ltdc",		"apb2_div" },
 };
 
-enum { SYSTICK, FCLK, CLK_LSI, CLK_LSE, CLK_HSE_RTC, CLK_RTC, END_PRIMARY_CLK };
-
 /*
  * This bitmask tells us which bit offsets (0..192) on STM32F4[23]xxx
  * have gate bits associated with them. Its combined hweight is 71.
@@ -324,23 +332,312 @@ static struct clk *clk_register_apb_mul(struct device *dev, const char *name,
 	return clk;
 }
 
-/*
- * Decode current PLL state and (statically) model the state we inherit from
- * the bootloader.
- */
-static void stm32f4_rcc_register_pll(const char *hse_clk, const char *hsi_clk)
+enum {
+	PLL,
+	PLL_I2S,
+	PLL_SAI,
+};
+
+static const struct clk_div_table pll_divp_table[] = {
+	{ 0, 2 }, { 1, 4 }, { 2, 6 }, { 3, 8 }, { 0 }
+};
+
+static const struct clk_div_table pll_divr_table[] = {
+	{ 2, 2 }, { 3, 3 }, { 4, 4 }, { 5, 5 }, { 6, 6 }, { 7, 7 }, { 0 }
+};
+
+struct stm32f4_pll {
+	spinlock_t *lock;
+	struct	clk_gate gate;
+	u8 offset;
+	u8 bit_rdy_idx;
+	u8 status;
+	u8 n_start;
+};
+
+#define to_stm32f4_pll(_gate) container_of(_gate, struct stm32f4_pll, gate)
+
+struct stm32f4_vco_data {
+	const char *vco_name;
+	u8 offset;
+	u8 bit_idx;
+	u8 bit_rdy_idx;
+};
+
+static const struct stm32f4_vco_data  vco_data[] = {
+	{ "vco",     STM32F4_RCC_PLLCFGR,    24, 25 },
+	{ "vco-i2s", STM32F4_RCC_PLLI2SCFGR, 26, 27 },
+	{ "vco-sai", STM32F4_RCC_PLLSAICFGR, 28, 29 },
+};
+
+struct stm32f4_div_data {
+	u8 shift;
+	u8 width;
+	u8 flag_div;
+	const struct clk_div_table *div_table;
+};
+
+#define MAX_PLL_DIV 3
+static const struct stm32f4_div_data  div_data[MAX_PLL_DIV] = {
+	{ 16, 2, 0,			pll_divp_table	},
+	{ 24, 4, CLK_DIVIDER_ONE_BASED, NULL		},
+	{ 28, 3, 0,			pll_divr_table	},
+};
+
+struct stm32f4_pll_data {
+	u8 pll_num;
+	u8 n_start;
+	const char *div_name[MAX_PLL_DIV];
+};
+
+static const struct stm32f4_pll_data stm32f429_pll[MAX_PLL_DIV] = {
+	{ PLL,	   192, { "pll", "pll48",    NULL	} },
+	{ PLL_I2S, 192, { NULL,  "plli2s-q", "plli2s-r" } },
+	{ PLL_SAI,  49, { NULL,  "pllsai-q", "pllsai-r" } },
+};
+
+static const struct stm32f4_pll_data stm32f469_pll[MAX_PLL_DIV] = {
+	{ PLL,	   50, { "pll",	     "pll-q",    NULL	    } },
+	{ PLL_I2S, 50, { "plli2s-p", "plli2s-q", "plli2s-r" } },
+	{ PLL_SAI, 50, { "pllsai-p", "pllsai-q", "pllsai-r" } },
+};
+
+static int stm32f4_pll_is_enabled(struct clk_hw *hw)
+{
+	return clk_gate_ops.is_enabled(hw);
+}
+
+static int stm32f4_pll_enable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	struct stm32f4_pll *pll = to_stm32f4_pll(gate);
+	int ret = 0;
+	unsigned long reg;
+
+	ret = clk_gate_ops.enable(hw);
+
+	ret = readl_relaxed_poll_timeout_atomic(base + STM32F4_RCC_CR, reg,
+			reg & (1 << pll->bit_rdy_idx), 0, 10000);
+
+	return ret;
+}
+
+static void stm32f4_pll_disable(struct clk_hw *hw)
+{
+	clk_gate_ops.disable(hw);
+}
+
+static unsigned long stm32f4_pll_recalc(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	struct stm32f4_pll *pll = to_stm32f4_pll(gate);
+	unsigned long n;
+
+	n = (readl(base + pll->offset) >> 6) & 0x1ff;
+
+	return parent_rate * n;
+}
+
+static long stm32f4_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long *prate)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	struct stm32f4_pll *pll = to_stm32f4_pll(gate);
+	unsigned long n;
+
+	n = rate / *prate;
+
+	if (n < pll->n_start)
+		n = pll->n_start;
+	else if (n > 432)
+		n = 432;
+
+	return *prate * n;
+}
+
+static int stm32f4_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	struct stm32f4_pll *pll = to_stm32f4_pll(gate);
+
+	unsigned long n;
+	unsigned long val;
+	int pll_state;
+
+	pll_state = stm32f4_pll_is_enabled(hw);
+
+	if (pll_state)
+		stm32f4_pll_disable(hw);
+
+	n = rate  / parent_rate;
+
+	val = readl(base + pll->offset) & ~(0x1ff << 6);
+
+	writel(val | ((n & 0x1ff) <<  6), base + pll->offset);
+
+	if (pll_state)
+		stm32f4_pll_enable(hw);
+
+	return 0;
+}
+
+static const struct clk_ops stm32f4_pll_gate_ops = {
+	.enable		= stm32f4_pll_enable,
+	.disable	= stm32f4_pll_disable,
+	.is_enabled	= stm32f4_pll_is_enabled,
+	.recalc_rate	= stm32f4_pll_recalc,
+	.round_rate	= stm32f4_pll_round_rate,
+	.set_rate	= stm32f4_pll_set_rate,
+};
+
+struct stm32f4_pll_div {
+	struct clk_divider div;
+	struct clk_hw *hw_pll;
+};
+
+#define to_pll_div_clk(_div) container_of(_div, struct stm32f4_pll_div, div)
+
+static unsigned long stm32f4_pll_div_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	return clk_divider_ops.recalc_rate(hw, parent_rate);
+}
+
+static long stm32f4_pll_div_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	return clk_divider_ops.round_rate(hw, rate, prate);
+}
+
+static int stm32f4_pll_div_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	int pll_state, ret;
+
+	struct clk_divider *div = to_clk_divider(hw);
+	struct stm32f4_pll_div *pll_div = to_pll_div_clk(div);
+
+	pll_state = stm32f4_pll_is_enabled(pll_div->hw_pll);
+
+	if (pll_state)
+		stm32f4_pll_disable(pll_div->hw_pll);
+
+	ret = clk_divider_ops.set_rate(hw, rate, parent_rate);
+
+	if (pll_state)
+		stm32f4_pll_enable(pll_div->hw_pll);
+
+	return ret;
+}
+
+const struct clk_ops stm32f4_pll_div_ops = {
+	.recalc_rate = stm32f4_pll_div_recalc_rate,
+	.round_rate = stm32f4_pll_div_round_rate,
+	.set_rate = stm32f4_pll_div_set_rate,
+};
+
+static struct clk_hw *clk_register_pll_div(const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 shift, u8 width,
+		u8 clk_divider_flags, const struct clk_div_table *table,
+		struct clk_hw *pll_hw, spinlock_t *lock)
 {
-	unsigned long pllcfgr = readl(base + STM32F4_RCC_PLLCFGR);
+	struct stm32f4_pll_div *pll_div;
+	struct clk_hw *hw;
+	struct clk_init_data init;
+	int ret;
+
+	/* allocate the divider */
+	pll_div = kzalloc(sizeof(*pll_div), GFP_KERNEL);
+	if (!pll_div)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &stm32f4_pll_div_ops;
+	init.flags = flags;
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
+	/* struct clk_divider assignments */
+	pll_div->div.reg = reg;
+	pll_div->div.shift = shift;
+	pll_div->div.width = width;
+	pll_div->div.flags = clk_divider_flags;
+	pll_div->div.lock = lock;
+	pll_div->div.table = table;
+	pll_div->div.hw.init = &init;
+
+	pll_div->hw_pll = pll_hw;
+
+	/* register the clock */
+	hw = &pll_div->div.hw;
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(pll_div);
+		hw = ERR_PTR(ret);
+	}
+
+	return hw;
+}
+
+static struct clk_hw *stm32f4_rcc_register_pll(const char *pllsrc,
+		const struct stm32f4_pll_data *data,  spinlock_t *lock)
+{
+	struct stm32f4_pll *pll;
+	struct clk_init_data init = { NULL };
+	void __iomem *reg;
+	struct clk_hw *pll_hw;
+	int ret;
+	int i;
+	const struct stm32f4_vco_data *vco;
+
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	vco = &vco_data[data->pll_num];
+
+	init.name = vco->vco_name;
+	init.ops = &stm32f4_pll_gate_ops;
+	init.flags = CLK_SET_RATE_GATE;
+	init.parent_names = &pllsrc;
+	init.num_parents = 1;
+
+	pll->gate.lock = lock;
+	pll->gate.reg = base + STM32F4_RCC_CR;
+	pll->gate.bit_idx = vco->bit_idx;
+	pll->gate.hw.init = &init;
+
+	pll->offset = vco->offset;
+	pll->n_start = data->n_start;
+	pll->bit_rdy_idx = vco->bit_rdy_idx;
+	pll->status = (readl(base + STM32F4_RCC_CR) >> vco->bit_idx) & 0x1;
 
-	unsigned long pllm   = pllcfgr & 0x3f;
-	unsigned long plln   = (pllcfgr >> 6) & 0x1ff;
-	unsigned long pllp   = BIT(((pllcfgr >> 16) & 3) + 1);
-	const char   *pllsrc = pllcfgr & BIT(22) ? hse_clk : hsi_clk;
-	unsigned long pllq   = (pllcfgr >> 24) & 0xf;
+	reg = base + pll->offset;
 
-	clk_register_fixed_factor(NULL, "vco", pllsrc, 0, plln, pllm);
-	clk_register_fixed_factor(NULL, "pll", "vco", 0, 1, pllp);
-	clk_register_fixed_factor(NULL, "pll48", "vco", 0, 1, pllq);
+	pll_hw = &pll->gate.hw;
+	ret = clk_hw_register(NULL, pll_hw);
+	if (ret) {
+		kfree(pll);
+		return ERR_PTR(ret);
+	}
+
+	for (i = 0; i < MAX_PLL_DIV; i++)
+		if (data->div_name[i])
+			clk_register_pll_div(data->div_name[i],
+					vco->vco_name,
+					0,
+					reg,
+					div_data[i].shift,
+					div_data[i].width,
+					div_data[i].flag_div,
+					div_data[i].div_table,
+					pll_hw,
+					lock);
+	return pll_hw;
 }
 
 /*
@@ -615,18 +912,21 @@ struct stm32f4_clk_data {
 	const struct stm32f4_gate_data *gates_data;
 	const u64 *gates_map;
 	int gates_num;
+	const struct stm32f4_pll_data *pll_data;
 };
 
 static const struct stm32f4_clk_data stm32f429_clk_data = {
 	.gates_data	= stm32f429_gates,
 	.gates_map	= stm32f42xx_gate_map,
 	.gates_num	= ARRAY_SIZE(stm32f429_gates),
+	.pll_data	= stm32f429_pll,
 };
 
 static const struct stm32f4_clk_data stm32f469_clk_data = {
 	.gates_data	= stm32f469_gates,
 	.gates_map	= stm32f46xx_gate_map,
 	.gates_num	= ARRAY_SIZE(stm32f469_gates),
+	.pll_data	= stm32f469_pll,
 };
 
 static const struct of_device_id stm32f4_of_match[] = {
@@ -647,6 +947,9 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 	int n;
 	const struct of_device_id *match;
 	const struct stm32f4_clk_data *data;
+	unsigned long pllcfgr;
+	const char *pllsrc;
+	unsigned long pllm;
 
 	base = of_iomap(np, 0);
 	if (!base) {
@@ -677,7 +980,21 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 
 	clk_register_fixed_rate_with_accuracy(NULL, "hsi", NULL, 0,
 			16000000, 160000);
-	stm32f4_rcc_register_pll(hse_clk, "hsi");
+	pllcfgr = readl(base + STM32F4_RCC_PLLCFGR);
+	pllsrc = pllcfgr & BIT(22) ? hse_clk : "hsi";
+	pllm = pllcfgr & 0x3f;
+
+	clk_hw_register_fixed_factor(NULL, "vco_in", pllsrc,
+					       0, 1, pllm);
+
+	stm32f4_rcc_register_pll("vco_in", &data->pll_data[0],
+			&stm32f4_clk_lock);
+
+	clks[PLL_VCO_I2S] = stm32f4_rcc_register_pll("vco_in",
+			&data->pll_data[1], &stm32f4_clk_lock);
+
+	clks[PLL_VCO_SAI] = stm32f4_rcc_register_pll("vco_in",
+			&data->pll_data[2], &stm32f4_clk_lock);
 
 	sys_parents[1] = hse_clk;
 	clk_register_mux_table(
-- 
1.9.1

Re: [PATCH v4 2/9] clk: stm32f4: Add PLL_I2S & PLL_SAI for STM32F429/469 boards

[Stephen Boyd]

On 12/13, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> This patch introduces PLL_I2S and PLL_SAI.
> Vco clock of these PLLs can be modify by DT (only n multiplicator,
> m divider is still fixed by the boot-loader).
> Each PLL has 3 dividers. PLL should be off when we modify the rate.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> Acked-by: Rob Herring <robh@kernel.org>
> ---

Applied to clk-stm32f4 and merged into clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v4 2/9] clk: stm32f4: Add PLL_I2S & PLL_SAI for STM32F429/469 boards

[Stephen Boyd]

On 12/13, gabriel.fernandez at st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> This patch introduces PLL_I2S and PLL_SAI.
> Vco clock of these PLLs can be modify by DT (only n multiplicator,
> m divider is still fixed by the boot-loader).
> Each PLL has 3 dividers. PLL should be off when we modify the rate.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> Acked-by: Rob Herring <robh@kernel.org>
> ---

Applied to clk-stm32f4 and merged into clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v4 3/9] clk: stm32f4: Add post divisor for I2S & SAI PLLs

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch adds post dividers of I2S & SAI PLLs.
These dividers are managed by a dedicated register (RCC_DCKCFGR).
The PLL should be off before a set rate.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 drivers/clk/clk-stm32f4.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index cab2014..70ca93c 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -47,6 +47,10 @@
 #define STM32F4_RCC_CSR			0x74
 #define STM32F4_RCC_PLLI2SCFGR		0x84
 #define STM32F4_RCC_PLLSAICFGR		0x88
+#define STM32F4_RCC_DCKCFGR		0x8c
+
+#define NONE -1
+#define NO_IDX  NONE
 
 struct stm32f4_gate_data {
 	u8	offset;
@@ -357,6 +361,19 @@ struct stm32f4_pll {
 
 #define to_stm32f4_pll(_gate) container_of(_gate, struct stm32f4_pll, gate)
 
+struct stm32f4_pll_post_div_data {
+	int idx;
+	u8 pll_num;
+	const char *name;
+	const char *parent;
+	u8 flag;
+	u8 offset;
+	u8 shift;
+	u8 width;
+	u8 flag_div;
+	const struct clk_div_table *div_table;
+};
+
 struct stm32f4_vco_data {
 	const char *vco_name;
 	u8 offset;
@@ -370,6 +387,23 @@ struct stm32f4_vco_data {
 	{ "vco-sai", STM32F4_RCC_PLLSAICFGR, 28, 29 },
 };
 
+
+static const struct clk_div_table post_divr_table[] = {
+	{ 0, 2 }, { 1, 4 }, { 2, 8 }, { 3, 16 }, { 0 }
+};
+
+#define MAX_POST_DIV 3
+static const struct stm32f4_pll_post_div_data  post_div_data[MAX_POST_DIV] = {
+	{ CLK_I2SQ_PDIV, PLL_I2S, "plli2s-q-div", "plli2s-q",
+		CLK_SET_RATE_PARENT, STM32F4_RCC_DCKCFGR, 0, 5, 0, NULL},
+
+	{ CLK_SAIQ_PDIV, PLL_SAI, "pllsai-q-div", "pllsai-q",
+		CLK_SET_RATE_PARENT, STM32F4_RCC_DCKCFGR, 8, 5, 0, NULL },
+
+	{ NO_IDX, PLL_SAI, "pllsai-r-div", "pllsai-r", CLK_SET_RATE_PARENT,
+		STM32F4_RCC_DCKCFGR, 16, 2, 0, post_divr_table },
+};
+
 struct stm32f4_div_data {
 	u8 shift;
 	u8 width;
@@ -996,6 +1030,27 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 	clks[PLL_VCO_SAI] = stm32f4_rcc_register_pll("vco_in",
 			&data->pll_data[2], &stm32f4_clk_lock);
 
+	for (n = 0; n < MAX_POST_DIV; n++) {
+		const struct stm32f4_pll_post_div_data *post_div;
+		struct clk_hw *hw;
+
+		post_div = &post_div_data[n];
+
+		hw = clk_register_pll_div(post_div->name,
+				post_div->parent,
+				post_div->flag,
+				base + post_div->offset,
+				post_div->shift,
+				post_div->width,
+				post_div->flag_div,
+				post_div->div_table,
+				clks[post_div->pll_num],
+				&stm32f4_clk_lock);
+
+		if (post_div->idx != NO_IDX)
+			clks[post_div->idx] = hw;
+	}
+
 	sys_parents[1] = hse_clk;
 	clk_register_mux_table(
 	    NULL, "sys", sys_parents, ARRAY_SIZE(sys_parents), 0,
-- 
1.9.1

[PATCH v4 3/9] clk: stm32f4: Add post divisor for I2S & SAI PLLs

[gabriel.fernandez at st.com]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch adds post dividers of I2S & SAI PLLs.
These dividers are managed by a dedicated register (RCC_DCKCFGR).
The PLL should be off before a set rate.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 drivers/clk/clk-stm32f4.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index cab2014..70ca93c 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -47,6 +47,10 @@
 #define STM32F4_RCC_CSR			0x74
 #define STM32F4_RCC_PLLI2SCFGR		0x84
 #define STM32F4_RCC_PLLSAICFGR		0x88
+#define STM32F4_RCC_DCKCFGR		0x8c
+
+#define NONE -1
+#define NO_IDX  NONE
 
 struct stm32f4_gate_data {
 	u8	offset;
@@ -357,6 +361,19 @@ struct stm32f4_pll {
 
 #define to_stm32f4_pll(_gate) container_of(_gate, struct stm32f4_pll, gate)
 
+struct stm32f4_pll_post_div_data {
+	int idx;
+	u8 pll_num;
+	const char *name;
+	const char *parent;
+	u8 flag;
+	u8 offset;
+	u8 shift;
+	u8 width;
+	u8 flag_div;
+	const struct clk_div_table *div_table;
+};
+
 struct stm32f4_vco_data {
 	const char *vco_name;
 	u8 offset;
@@ -370,6 +387,23 @@ struct stm32f4_vco_data {
 	{ "vco-sai", STM32F4_RCC_PLLSAICFGR, 28, 29 },
 };
 
+
+static const struct clk_div_table post_divr_table[] = {
+	{ 0, 2 }, { 1, 4 }, { 2, 8 }, { 3, 16 }, { 0 }
+};
+
+#define MAX_POST_DIV 3
+static const struct stm32f4_pll_post_div_data  post_div_data[MAX_POST_DIV] = {
+	{ CLK_I2SQ_PDIV, PLL_I2S, "plli2s-q-div", "plli2s-q",
+		CLK_SET_RATE_PARENT, STM32F4_RCC_DCKCFGR, 0, 5, 0, NULL},
+
+	{ CLK_SAIQ_PDIV, PLL_SAI, "pllsai-q-div", "pllsai-q",
+		CLK_SET_RATE_PARENT, STM32F4_RCC_DCKCFGR, 8, 5, 0, NULL },
+
+	{ NO_IDX, PLL_SAI, "pllsai-r-div", "pllsai-r", CLK_SET_RATE_PARENT,
+		STM32F4_RCC_DCKCFGR, 16, 2, 0, post_divr_table },
+};
+
 struct stm32f4_div_data {
 	u8 shift;
 	u8 width;
@@ -996,6 +1030,27 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 	clks[PLL_VCO_SAI] = stm32f4_rcc_register_pll("vco_in",
 			&data->pll_data[2], &stm32f4_clk_lock);
 
+	for (n = 0; n < MAX_POST_DIV; n++) {
+		const struct stm32f4_pll_post_div_data *post_div;
+		struct clk_hw *hw;
+
+		post_div = &post_div_data[n];
+
+		hw = clk_register_pll_div(post_div->name,
+				post_div->parent,
+				post_div->flag,
+				base + post_div->offset,
+				post_div->shift,
+				post_div->width,
+				post_div->flag_div,
+				post_div->div_table,
+				clks[post_div->pll_num],
+				&stm32f4_clk_lock);
+
+		if (post_div->idx != NO_IDX)
+			clks[post_div->idx] = hw;
+	}
+
 	sys_parents[1] = hse_clk;
 	clk_register_mux_table(
 	    NULL, "sys", sys_parents, ARRAY_SIZE(sys_parents), 0,
-- 
1.9.1

[PATCH v4 3/9] clk: stm32f4: Add post divisor for I2S & SAI PLLs

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch adds post dividers of I2S & SAI PLLs.
These dividers are managed by a dedicated register (RCC_DCKCFGR).
The PLL should be off before a set rate.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 drivers/clk/clk-stm32f4.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index cab2014..70ca93c 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -47,6 +47,10 @@
 #define STM32F4_RCC_CSR			0x74
 #define STM32F4_RCC_PLLI2SCFGR		0x84
 #define STM32F4_RCC_PLLSAICFGR		0x88
+#define STM32F4_RCC_DCKCFGR		0x8c
+
+#define NONE -1
+#define NO_IDX  NONE
 
 struct stm32f4_gate_data {
 	u8	offset;
@@ -357,6 +361,19 @@ struct stm32f4_pll {
 
 #define to_stm32f4_pll(_gate) container_of(_gate, struct stm32f4_pll, gate)
 
+struct stm32f4_pll_post_div_data {
+	int idx;
+	u8 pll_num;
+	const char *name;
+	const char *parent;
+	u8 flag;
+	u8 offset;
+	u8 shift;
+	u8 width;
+	u8 flag_div;
+	const struct clk_div_table *div_table;
+};
+
 struct stm32f4_vco_data {
 	const char *vco_name;
 	u8 offset;
@@ -370,6 +387,23 @@ struct stm32f4_vco_data {
 	{ "vco-sai", STM32F4_RCC_PLLSAICFGR, 28, 29 },
 };
 
+
+static const struct clk_div_table post_divr_table[] = {
+	{ 0, 2 }, { 1, 4 }, { 2, 8 }, { 3, 16 }, { 0 }
+};
+
+#define MAX_POST_DIV 3
+static const struct stm32f4_pll_post_div_data  post_div_data[MAX_POST_DIV] = {
+	{ CLK_I2SQ_PDIV, PLL_I2S, "plli2s-q-div", "plli2s-q",
+		CLK_SET_RATE_PARENT, STM32F4_RCC_DCKCFGR, 0, 5, 0, NULL},
+
+	{ CLK_SAIQ_PDIV, PLL_SAI, "pllsai-q-div", "pllsai-q",
+		CLK_SET_RATE_PARENT, STM32F4_RCC_DCKCFGR, 8, 5, 0, NULL },
+
+	{ NO_IDX, PLL_SAI, "pllsai-r-div", "pllsai-r", CLK_SET_RATE_PARENT,
+		STM32F4_RCC_DCKCFGR, 16, 2, 0, post_divr_table },
+};
+
 struct stm32f4_div_data {
 	u8 shift;
 	u8 width;
@@ -996,6 +1030,27 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 	clks[PLL_VCO_SAI] = stm32f4_rcc_register_pll("vco_in",
 			&data->pll_data[2], &stm32f4_clk_lock);
 
+	for (n = 0; n < MAX_POST_DIV; n++) {
+		const struct stm32f4_pll_post_div_data *post_div;
+		struct clk_hw *hw;
+
+		post_div = &post_div_data[n];
+
+		hw = clk_register_pll_div(post_div->name,
+				post_div->parent,
+				post_div->flag,
+				base + post_div->offset,
+				post_div->shift,
+				post_div->width,
+				post_div->flag_div,
+				post_div->div_table,
+				clks[post_div->pll_num],
+				&stm32f4_clk_lock);
+
+		if (post_div->idx != NO_IDX)
+			clks[post_div->idx] = hw;
+	}
+
 	sys_parents[1] = hse_clk;
 	clk_register_mux_table(
 	    NULL, "sys", sys_parents, ARRAY_SIZE(sys_parents), 0,
-- 
1.9.1

Re: [PATCH v4 3/9] clk: stm32f4: Add post divisor for I2S & SAI PLLs

[Stephen Boyd]

On 12/13, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> This patch adds post dividers of I2S & SAI PLLs.
> These dividers are managed by a dedicated register (RCC_DCKCFGR).
> The PLL should be off before a set rate.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---

Applied to clk-stm32f4 and merged into clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v4 3/9] clk: stm32f4: Add post divisor for I2S & SAI PLLs

[Stephen Boyd]

On 12/13, gabriel.fernandez at st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> This patch adds post dividers of I2S & SAI PLLs.
> These dividers are managed by a dedicated register (RCC_DCKCFGR).
> The PLL should be off before a set rate.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---

Applied to clk-stm32f4 and merged into clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v4 3/9] clk: stm32f4: Add post divisor for I2S & SAI PLLs

[Stephen Boyd]

On 12/13, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> This patch adds post dividers of I2S & SAI PLLs.
> These dividers are managed by a dedicated register (RCC_DCKCFGR).
> The PLL should be off before a set rate.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---

Applied to clk-stm32f4 and merged into clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v4 4/9] clk: stm32f4: Add lcd-tft clock

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch introduces lcd-tft clock for stm32f4 soc.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 drivers/clk/clk-stm32f4.c | 114 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 114 insertions(+)

diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index 70ca93c..076a063 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -51,6 +51,8 @@
 
 #define NONE -1
 #define NO_IDX  NONE
+#define NO_MUX  NONE
+#define NO_GATE NONE
 
 struct stm32f4_gate_data {
 	u8	offset;
@@ -942,11 +944,37 @@ static struct clk_hw *stm32_register_cclk(struct device *dev, const char *name,
 	"no-clock", "lse", "lsi", "hse-rtc"
 };
 
+static const char *lcd_parent[1] = { "pllsai-r-div" };
+
+struct stm32_aux_clk {
+	int idx;
+	const char *name;
+	const char * const *parent_names;
+	int num_parents;
+	int offset_mux;
+	u8 shift;
+	u8 mask;
+	int offset_gate;
+	u8 bit_idx;
+	unsigned long flags;
+};
+
 struct stm32f4_clk_data {
 	const struct stm32f4_gate_data *gates_data;
 	const u64 *gates_map;
 	int gates_num;
 	const struct stm32f4_pll_data *pll_data;
+	const struct stm32_aux_clk *aux_clk;
+	int aux_clk_num;
+};
+
+static const struct stm32_aux_clk stm32f429_aux_clk[] = {
+	{
+		CLK_LCD, "lcd-tft", lcd_parent, ARRAY_SIZE(lcd_parent),
+		NO_MUX, 0, 0,
+		STM32F4_RCC_APB2ENR, 26,
+		CLK_SET_RATE_PARENT
+	},
 };
 
 static const struct stm32f4_clk_data stm32f429_clk_data = {
@@ -954,6 +982,8 @@ struct stm32f4_clk_data {
 	.gates_map	= stm32f42xx_gate_map,
 	.gates_num	= ARRAY_SIZE(stm32f429_gates),
 	.pll_data	= stm32f429_pll,
+	.aux_clk	= stm32f429_aux_clk,
+	.aux_clk_num	= ARRAY_SIZE(stm32f429_aux_clk),
 };
 
 static const struct stm32f4_clk_data stm32f469_clk_data = {
@@ -961,6 +991,8 @@ struct stm32f4_clk_data {
 	.gates_map	= stm32f46xx_gate_map,
 	.gates_num	= ARRAY_SIZE(stm32f469_gates),
 	.pll_data	= stm32f469_pll,
+	.aux_clk	= stm32f429_aux_clk,
+	.aux_clk_num	= ARRAY_SIZE(stm32f429_aux_clk),
 };
 
 static const struct of_device_id stm32f4_of_match[] = {
@@ -975,6 +1007,66 @@ struct stm32f4_clk_data {
 	{}
 };
 
+static struct clk_hw *stm32_register_aux_clk(const char *name,
+		const char * const *parent_names, int num_parents,
+		int offset_mux, u8 shift, u8 mask,
+		int offset_gate, u8 bit_idx,
+		unsigned long flags, spinlock_t *lock)
+{
+	struct clk_hw *hw;
+	struct clk_gate *gate;
+	struct clk_mux *mux = NULL;
+	struct clk_hw *mux_hw = NULL, *gate_hw = NULL;
+	const struct clk_ops *mux_ops = NULL, *gate_ops = NULL;
+
+	if (offset_gate != NO_GATE) {
+		gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+		if (!gate) {
+			hw = ERR_PTR(-EINVAL);
+			goto fail;
+		}
+
+		gate->reg = base + offset_gate;
+		gate->bit_idx = bit_idx;
+		gate->flags = 0;
+		gate->lock = lock;
+		gate_hw = &gate->hw;
+		gate_ops = &clk_gate_ops;
+	}
+
+	if (offset_mux != NO_MUX) {
+		mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+		if (!mux) {
+			kfree(gate);
+			hw = ERR_PTR(-EINVAL);
+			goto fail;
+		}
+
+		mux->reg = base + offset_mux;
+		mux->shift = shift;
+		mux->mask = mask;
+		mux->flags = 0;
+		mux_hw = &mux->hw;
+		mux_ops = &clk_mux_ops;
+	}
+
+	if (mux_hw == NULL && gate_hw == NULL)
+		return ERR_PTR(-EINVAL);
+
+	hw = clk_hw_register_composite(NULL, name, parent_names, num_parents,
+			mux_hw, mux_ops,
+			NULL, NULL,
+			gate_hw, gate_ops,
+			flags);
+
+	if (IS_ERR(hw)) {
+		kfree(gate);
+		kfree(mux);
+	}
+fail:
+	return hw;
+}
+
 static void __init stm32f4_rcc_init(struct device_node *np)
 {
 	const char *hse_clk;
@@ -1134,6 +1226,28 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 		goto fail;
 	}
 
+	for (n = 0; n < data->aux_clk_num; n++) {
+		const struct stm32_aux_clk *aux_clk;
+		struct clk_hw *hw;
+
+		aux_clk = &data->aux_clk[n];
+
+		hw = stm32_register_aux_clk(aux_clk->name,
+				aux_clk->parent_names, aux_clk->num_parents,
+				aux_clk->offset_mux, aux_clk->shift,
+				aux_clk->mask, aux_clk->offset_gate,
+				aux_clk->bit_idx, aux_clk->flags,
+				&stm32f4_clk_lock);
+
+		if (IS_ERR(hw)) {
+			pr_warn("Unable to register %s clk\n", aux_clk->name);
+			continue;
+		}
+
+		if (aux_clk->idx != NO_IDX)
+			clks[aux_clk->idx] = hw;
+	}
+
 	of_clk_add_hw_provider(np, stm32f4_rcc_lookup_clk, NULL);
 	return;
 fail:
-- 
1.9.1

[PATCH v4 4/9] clk: stm32f4: Add lcd-tft clock

[gabriel.fernandez at st.com]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch introduces lcd-tft clock for stm32f4 soc.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 drivers/clk/clk-stm32f4.c | 114 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 114 insertions(+)

diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index 70ca93c..076a063 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -51,6 +51,8 @@
 
 #define NONE -1
 #define NO_IDX  NONE
+#define NO_MUX  NONE
+#define NO_GATE NONE
 
 struct stm32f4_gate_data {
 	u8	offset;
@@ -942,11 +944,37 @@ static struct clk_hw *stm32_register_cclk(struct device *dev, const char *name,
 	"no-clock", "lse", "lsi", "hse-rtc"
 };
 
+static const char *lcd_parent[1] = { "pllsai-r-div" };
+
+struct stm32_aux_clk {
+	int idx;
+	const char *name;
+	const char * const *parent_names;
+	int num_parents;
+	int offset_mux;
+	u8 shift;
+	u8 mask;
+	int offset_gate;
+	u8 bit_idx;
+	unsigned long flags;
+};
+
 struct stm32f4_clk_data {
 	const struct stm32f4_gate_data *gates_data;
 	const u64 *gates_map;
 	int gates_num;
 	const struct stm32f4_pll_data *pll_data;
+	const struct stm32_aux_clk *aux_clk;
+	int aux_clk_num;
+};
+
+static const struct stm32_aux_clk stm32f429_aux_clk[] = {
+	{
+		CLK_LCD, "lcd-tft", lcd_parent, ARRAY_SIZE(lcd_parent),
+		NO_MUX, 0, 0,
+		STM32F4_RCC_APB2ENR, 26,
+		CLK_SET_RATE_PARENT
+	},
 };
 
 static const struct stm32f4_clk_data stm32f429_clk_data = {
@@ -954,6 +982,8 @@ struct stm32f4_clk_data {
 	.gates_map	= stm32f42xx_gate_map,
 	.gates_num	= ARRAY_SIZE(stm32f429_gates),
 	.pll_data	= stm32f429_pll,
+	.aux_clk	= stm32f429_aux_clk,
+	.aux_clk_num	= ARRAY_SIZE(stm32f429_aux_clk),
 };
 
 static const struct stm32f4_clk_data stm32f469_clk_data = {
@@ -961,6 +991,8 @@ struct stm32f4_clk_data {
 	.gates_map	= stm32f46xx_gate_map,
 	.gates_num	= ARRAY_SIZE(stm32f469_gates),
 	.pll_data	= stm32f469_pll,
+	.aux_clk	= stm32f429_aux_clk,
+	.aux_clk_num	= ARRAY_SIZE(stm32f429_aux_clk),
 };
 
 static const struct of_device_id stm32f4_of_match[] = {
@@ -975,6 +1007,66 @@ struct stm32f4_clk_data {
 	{}
 };
 
+static struct clk_hw *stm32_register_aux_clk(const char *name,
+		const char * const *parent_names, int num_parents,
+		int offset_mux, u8 shift, u8 mask,
+		int offset_gate, u8 bit_idx,
+		unsigned long flags, spinlock_t *lock)
+{
+	struct clk_hw *hw;
+	struct clk_gate *gate;
+	struct clk_mux *mux = NULL;
+	struct clk_hw *mux_hw = NULL, *gate_hw = NULL;
+	const struct clk_ops *mux_ops = NULL, *gate_ops = NULL;
+
+	if (offset_gate != NO_GATE) {
+		gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+		if (!gate) {
+			hw = ERR_PTR(-EINVAL);
+			goto fail;
+		}
+
+		gate->reg = base + offset_gate;
+		gate->bit_idx = bit_idx;
+		gate->flags = 0;
+		gate->lock = lock;
+		gate_hw = &gate->hw;
+		gate_ops = &clk_gate_ops;
+	}
+
+	if (offset_mux != NO_MUX) {
+		mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+		if (!mux) {
+			kfree(gate);
+			hw = ERR_PTR(-EINVAL);
+			goto fail;
+		}
+
+		mux->reg = base + offset_mux;
+		mux->shift = shift;
+		mux->mask = mask;
+		mux->flags = 0;
+		mux_hw = &mux->hw;
+		mux_ops = &clk_mux_ops;
+	}
+
+	if (mux_hw == NULL && gate_hw == NULL)
+		return ERR_PTR(-EINVAL);
+
+	hw = clk_hw_register_composite(NULL, name, parent_names, num_parents,
+			mux_hw, mux_ops,
+			NULL, NULL,
+			gate_hw, gate_ops,
+			flags);
+
+	if (IS_ERR(hw)) {
+		kfree(gate);
+		kfree(mux);
+	}
+fail:
+	return hw;
+}
+
 static void __init stm32f4_rcc_init(struct device_node *np)
 {
 	const char *hse_clk;
@@ -1134,6 +1226,28 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 		goto fail;
 	}
 
+	for (n = 0; n < data->aux_clk_num; n++) {
+		const struct stm32_aux_clk *aux_clk;
+		struct clk_hw *hw;
+
+		aux_clk = &data->aux_clk[n];
+
+		hw = stm32_register_aux_clk(aux_clk->name,
+				aux_clk->parent_names, aux_clk->num_parents,
+				aux_clk->offset_mux, aux_clk->shift,
+				aux_clk->mask, aux_clk->offset_gate,
+				aux_clk->bit_idx, aux_clk->flags,
+				&stm32f4_clk_lock);
+
+		if (IS_ERR(hw)) {
+			pr_warn("Unable to register %s clk\n", aux_clk->name);
+			continue;
+		}
+
+		if (aux_clk->idx != NO_IDX)
+			clks[aux_clk->idx] = hw;
+	}
+
 	of_clk_add_hw_provider(np, stm32f4_rcc_lookup_clk, NULL);
 	return;
 fail:
-- 
1.9.1

[PATCH v4 4/9] clk: stm32f4: Add lcd-tft clock

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch introduces lcd-tft clock for stm32f4 soc.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 drivers/clk/clk-stm32f4.c | 114 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 114 insertions(+)

diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index 70ca93c..076a063 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -51,6 +51,8 @@
 
 #define NONE -1
 #define NO_IDX  NONE
+#define NO_MUX  NONE
+#define NO_GATE NONE
 
 struct stm32f4_gate_data {
 	u8	offset;
@@ -942,11 +944,37 @@ static struct clk_hw *stm32_register_cclk(struct device *dev, const char *name,
 	"no-clock", "lse", "lsi", "hse-rtc"
 };
 
+static const char *lcd_parent[1] = { "pllsai-r-div" };
+
+struct stm32_aux_clk {
+	int idx;
+	const char *name;
+	const char * const *parent_names;
+	int num_parents;
+	int offset_mux;
+	u8 shift;
+	u8 mask;
+	int offset_gate;
+	u8 bit_idx;
+	unsigned long flags;
+};
+
 struct stm32f4_clk_data {
 	const struct stm32f4_gate_data *gates_data;
 	const u64 *gates_map;
 	int gates_num;
 	const struct stm32f4_pll_data *pll_data;
+	const struct stm32_aux_clk *aux_clk;
+	int aux_clk_num;
+};
+
+static const struct stm32_aux_clk stm32f429_aux_clk[] = {
+	{
+		CLK_LCD, "lcd-tft", lcd_parent, ARRAY_SIZE(lcd_parent),
+		NO_MUX, 0, 0,
+		STM32F4_RCC_APB2ENR, 26,
+		CLK_SET_RATE_PARENT
+	},
 };
 
 static const struct stm32f4_clk_data stm32f429_clk_data = {
@@ -954,6 +982,8 @@ struct stm32f4_clk_data {
 	.gates_map	= stm32f42xx_gate_map,
 	.gates_num	= ARRAY_SIZE(stm32f429_gates),
 	.pll_data	= stm32f429_pll,
+	.aux_clk	= stm32f429_aux_clk,
+	.aux_clk_num	= ARRAY_SIZE(stm32f429_aux_clk),
 };
 
 static const struct stm32f4_clk_data stm32f469_clk_data = {
@@ -961,6 +991,8 @@ struct stm32f4_clk_data {
 	.gates_map	= stm32f46xx_gate_map,
 	.gates_num	= ARRAY_SIZE(stm32f469_gates),
 	.pll_data	= stm32f469_pll,
+	.aux_clk	= stm32f429_aux_clk,
+	.aux_clk_num	= ARRAY_SIZE(stm32f429_aux_clk),
 };
 
 static const struct of_device_id stm32f4_of_match[] = {
@@ -975,6 +1007,66 @@ struct stm32f4_clk_data {
 	{}
 };
 
+static struct clk_hw *stm32_register_aux_clk(const char *name,
+		const char * const *parent_names, int num_parents,
+		int offset_mux, u8 shift, u8 mask,
+		int offset_gate, u8 bit_idx,
+		unsigned long flags, spinlock_t *lock)
+{
+	struct clk_hw *hw;
+	struct clk_gate *gate;
+	struct clk_mux *mux = NULL;
+	struct clk_hw *mux_hw = NULL, *gate_hw = NULL;
+	const struct clk_ops *mux_ops = NULL, *gate_ops = NULL;
+
+	if (offset_gate != NO_GATE) {
+		gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+		if (!gate) {
+			hw = ERR_PTR(-EINVAL);
+			goto fail;
+		}
+
+		gate->reg = base + offset_gate;
+		gate->bit_idx = bit_idx;
+		gate->flags = 0;
+		gate->lock = lock;
+		gate_hw = &gate->hw;
+		gate_ops = &clk_gate_ops;
+	}
+
+	if (offset_mux != NO_MUX) {
+		mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+		if (!mux) {
+			kfree(gate);
+			hw = ERR_PTR(-EINVAL);
+			goto fail;
+		}
+
+		mux->reg = base + offset_mux;
+		mux->shift = shift;
+		mux->mask = mask;
+		mux->flags = 0;
+		mux_hw = &mux->hw;
+		mux_ops = &clk_mux_ops;
+	}
+
+	if (mux_hw == NULL && gate_hw == NULL)
+		return ERR_PTR(-EINVAL);
+
+	hw = clk_hw_register_composite(NULL, name, parent_names, num_parents,
+			mux_hw, mux_ops,
+			NULL, NULL,
+			gate_hw, gate_ops,
+			flags);
+
+	if (IS_ERR(hw)) {
+		kfree(gate);
+		kfree(mux);
+	}
+fail:
+	return hw;
+}
+
 static void __init stm32f4_rcc_init(struct device_node *np)
 {
 	const char *hse_clk;
@@ -1134,6 +1226,28 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 		goto fail;
 	}
 
+	for (n = 0; n < data->aux_clk_num; n++) {
+		const struct stm32_aux_clk *aux_clk;
+		struct clk_hw *hw;
+
+		aux_clk = &data->aux_clk[n];
+
+		hw = stm32_register_aux_clk(aux_clk->name,
+				aux_clk->parent_names, aux_clk->num_parents,
+				aux_clk->offset_mux, aux_clk->shift,
+				aux_clk->mask, aux_clk->offset_gate,
+				aux_clk->bit_idx, aux_clk->flags,
+				&stm32f4_clk_lock);
+
+		if (IS_ERR(hw)) {
+			pr_warn("Unable to register %s clk\n", aux_clk->name);
+			continue;
+		}
+
+		if (aux_clk->idx != NO_IDX)
+			clks[aux_clk->idx] = hw;
+	}
+
 	of_clk_add_hw_provider(np, stm32f4_rcc_lookup_clk, NULL);
 	return;
 fail:
-- 
1.9.1

Re: [PATCH v4 4/9] clk: stm32f4: Add lcd-tft clock

[Stephen Boyd]

On 12/13, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> This patch introduces lcd-tft clock for stm32f4 soc.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---

Applied to clk-stm32f4 and merged into clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v4 4/9] clk: stm32f4: Add lcd-tft clock

[Stephen Boyd]

On 12/13, gabriel.fernandez at st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> This patch introduces lcd-tft clock for stm32f4 soc.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---

Applied to clk-stm32f4 and merged into clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v4 5/9] clk: stm32f4: Add I2S clock

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch introduces I2S clock for stm32f4 soc.
The I2S clock could be derived from an external clock or from pll-i2s

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 drivers/clk/clk-stm32f4.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index 076a063..a7a6a16 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -946,6 +946,8 @@ static struct clk_hw *stm32_register_cclk(struct device *dev, const char *name,
 
 static const char *lcd_parent[1] = { "pllsai-r-div" };
 
+static const char *i2s_parents[2] = { "plli2s-r", NULL };
+
 struct stm32_aux_clk {
 	int idx;
 	const char *name;
@@ -975,6 +977,12 @@ struct stm32f4_clk_data {
 		STM32F4_RCC_APB2ENR, 26,
 		CLK_SET_RATE_PARENT
 	},
+	{
+		CLK_I2S, "i2s", i2s_parents, ARRAY_SIZE(i2s_parents),
+		STM32F4_RCC_CFGR, 23, 1,
+		NO_GATE, 0,
+		CLK_SET_RATE_PARENT
+	},
 };
 
 static const struct stm32f4_clk_data stm32f429_clk_data = {
@@ -1069,7 +1077,7 @@ static struct clk_hw *stm32_register_aux_clk(const char *name,
 
 static void __init stm32f4_rcc_init(struct device_node *np)
 {
-	const char *hse_clk;
+	const char *hse_clk, *i2s_in_clk;
 	int n;
 	const struct of_device_id *match;
 	const struct stm32f4_clk_data *data;
@@ -1104,6 +1112,10 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 
 	hse_clk = of_clk_get_parent_name(np, 0);
 
+	i2s_in_clk = of_clk_get_parent_name(np, 1);
+
+	i2s_parents[1] = i2s_in_clk;
+
 	clk_register_fixed_rate_with_accuracy(NULL, "hsi", NULL, 0,
 			16000000, 160000);
 	pllcfgr = readl(base + STM32F4_RCC_PLLCFGR);
-- 
1.9.1

[PATCH v4 5/9] clk: stm32f4: Add I2S clock

[gabriel.fernandez at st.com]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch introduces I2S clock for stm32f4 soc.
The I2S clock could be derived from an external clock or from pll-i2s

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 drivers/clk/clk-stm32f4.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index 076a063..a7a6a16 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -946,6 +946,8 @@ static struct clk_hw *stm32_register_cclk(struct device *dev, const char *name,
 
 static const char *lcd_parent[1] = { "pllsai-r-div" };
 
+static const char *i2s_parents[2] = { "plli2s-r", NULL };
+
 struct stm32_aux_clk {
 	int idx;
 	const char *name;
@@ -975,6 +977,12 @@ struct stm32f4_clk_data {
 		STM32F4_RCC_APB2ENR, 26,
 		CLK_SET_RATE_PARENT
 	},
+	{
+		CLK_I2S, "i2s", i2s_parents, ARRAY_SIZE(i2s_parents),
+		STM32F4_RCC_CFGR, 23, 1,
+		NO_GATE, 0,
+		CLK_SET_RATE_PARENT
+	},
 };
 
 static const struct stm32f4_clk_data stm32f429_clk_data = {
@@ -1069,7 +1077,7 @@ static struct clk_hw *stm32_register_aux_clk(const char *name,
 
 static void __init stm32f4_rcc_init(struct device_node *np)
 {
-	const char *hse_clk;
+	const char *hse_clk, *i2s_in_clk;
 	int n;
 	const struct of_device_id *match;
 	const struct stm32f4_clk_data *data;
@@ -1104,6 +1112,10 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 
 	hse_clk = of_clk_get_parent_name(np, 0);
 
+	i2s_in_clk = of_clk_get_parent_name(np, 1);
+
+	i2s_parents[1] = i2s_in_clk;
+
 	clk_register_fixed_rate_with_accuracy(NULL, "hsi", NULL, 0,
 			16000000, 160000);
 	pllcfgr = readl(base + STM32F4_RCC_PLLCFGR);
-- 
1.9.1

[PATCH v4 5/9] clk: stm32f4: Add I2S clock

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch introduces I2S clock for stm32f4 soc.
The I2S clock could be derived from an external clock or from pll-i2s

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 drivers/clk/clk-stm32f4.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index 076a063..a7a6a16 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -946,6 +946,8 @@ static struct clk_hw *stm32_register_cclk(struct device *dev, const char *name,
 
 static const char *lcd_parent[1] = { "pllsai-r-div" };
 
+static const char *i2s_parents[2] = { "plli2s-r", NULL };
+
 struct stm32_aux_clk {
 	int idx;
 	const char *name;
@@ -975,6 +977,12 @@ struct stm32f4_clk_data {
 		STM32F4_RCC_APB2ENR, 26,
 		CLK_SET_RATE_PARENT
 	},
+	{
+		CLK_I2S, "i2s", i2s_parents, ARRAY_SIZE(i2s_parents),
+		STM32F4_RCC_CFGR, 23, 1,
+		NO_GATE, 0,
+		CLK_SET_RATE_PARENT
+	},
 };
 
 static const struct stm32f4_clk_data stm32f429_clk_data = {
@@ -1069,7 +1077,7 @@ static struct clk_hw *stm32_register_aux_clk(const char *name,
 
 static void __init stm32f4_rcc_init(struct device_node *np)
 {
-	const char *hse_clk;
+	const char *hse_clk, *i2s_in_clk;
 	int n;
 	const struct of_device_id *match;
 	const struct stm32f4_clk_data *data;
@@ -1104,6 +1112,10 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 
 	hse_clk = of_clk_get_parent_name(np, 0);
 
+	i2s_in_clk = of_clk_get_parent_name(np, 1);
+
+	i2s_parents[1] = i2s_in_clk;
+
 	clk_register_fixed_rate_with_accuracy(NULL, "hsi", NULL, 0,
 			16000000, 160000);
 	pllcfgr = readl(base + STM32F4_RCC_PLLCFGR);
-- 
1.9.1

Re: [PATCH v4 5/9] clk: stm32f4: Add I2S clock

[Stephen Boyd]

On 12/13, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> This patch introduces I2S clock for stm32f4 soc.
> The I2S clock could be derived from an external clock or from pll-i2s
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---

Applied to clk-stm32f4 and merged into clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v4 5/9] clk: stm32f4: Add I2S clock

[Stephen Boyd]

On 12/13, gabriel.fernandez at st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> This patch introduces I2S clock for stm32f4 soc.
> The I2S clock could be derived from an external clock or from pll-i2s
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---

Applied to clk-stm32f4 and merged into clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v4 6/9] clk: stm32f4: Add SAI clocks

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch introduces SAI clocks for stm32f4 socs.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 drivers/clk/clk-stm32f4.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index a7a6a16..2bff436 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -948,6 +948,9 @@ static struct clk_hw *stm32_register_cclk(struct device *dev, const char *name,
 
 static const char *i2s_parents[2] = { "plli2s-r", NULL };
 
+static const char *sai_parents[4] = { "pllsai-q-div", "plli2s-q-div", NULL,
+	"no-clock" };
+
 struct stm32_aux_clk {
 	int idx;
 	const char *name;
@@ -983,6 +986,18 @@ struct stm32f4_clk_data {
 		NO_GATE, 0,
 		CLK_SET_RATE_PARENT
 	},
+	{
+		CLK_SAI1, "sai1-a", sai_parents, ARRAY_SIZE(sai_parents),
+		STM32F4_RCC_DCKCFGR, 20, 3,
+		STM32F4_RCC_APB2ENR, 22,
+		CLK_SET_RATE_PARENT
+	},
+	{
+		CLK_SAI2, "sai1-b", sai_parents, ARRAY_SIZE(sai_parents),
+		STM32F4_RCC_DCKCFGR, 22, 3,
+		STM32F4_RCC_APB2ENR, 22,
+		CLK_SET_RATE_PARENT
+	},
 };
 
 static const struct stm32f4_clk_data stm32f429_clk_data = {
@@ -1115,6 +1130,7 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 	i2s_in_clk = of_clk_get_parent_name(np, 1);
 
 	i2s_parents[1] = i2s_in_clk;
+	sai_parents[2] = i2s_in_clk;
 
 	clk_register_fixed_rate_with_accuracy(NULL, "hsi", NULL, 0,
 			16000000, 160000);
-- 
1.9.1

[PATCH v4 6/9] clk: stm32f4: Add SAI clocks

[gabriel.fernandez at st.com]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch introduces SAI clocks for stm32f4 socs.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 drivers/clk/clk-stm32f4.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index a7a6a16..2bff436 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -948,6 +948,9 @@ static struct clk_hw *stm32_register_cclk(struct device *dev, const char *name,
 
 static const char *i2s_parents[2] = { "plli2s-r", NULL };
 
+static const char *sai_parents[4] = { "pllsai-q-div", "plli2s-q-div", NULL,
+	"no-clock" };
+
 struct stm32_aux_clk {
 	int idx;
 	const char *name;
@@ -983,6 +986,18 @@ struct stm32f4_clk_data {
 		NO_GATE, 0,
 		CLK_SET_RATE_PARENT
 	},
+	{
+		CLK_SAI1, "sai1-a", sai_parents, ARRAY_SIZE(sai_parents),
+		STM32F4_RCC_DCKCFGR, 20, 3,
+		STM32F4_RCC_APB2ENR, 22,
+		CLK_SET_RATE_PARENT
+	},
+	{
+		CLK_SAI2, "sai1-b", sai_parents, ARRAY_SIZE(sai_parents),
+		STM32F4_RCC_DCKCFGR, 22, 3,
+		STM32F4_RCC_APB2ENR, 22,
+		CLK_SET_RATE_PARENT
+	},
 };
 
 static const struct stm32f4_clk_data stm32f429_clk_data = {
@@ -1115,6 +1130,7 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 	i2s_in_clk = of_clk_get_parent_name(np, 1);
 
 	i2s_parents[1] = i2s_in_clk;
+	sai_parents[2] = i2s_in_clk;
 
 	clk_register_fixed_rate_with_accuracy(NULL, "hsi", NULL, 0,
 			16000000, 160000);
-- 
1.9.1

[PATCH v4 6/9] clk: stm32f4: Add SAI clocks

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch introduces SAI clocks for stm32f4 socs.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 drivers/clk/clk-stm32f4.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index a7a6a16..2bff436 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -948,6 +948,9 @@ static struct clk_hw *stm32_register_cclk(struct device *dev, const char *name,
 
 static const char *i2s_parents[2] = { "plli2s-r", NULL };
 
+static const char *sai_parents[4] = { "pllsai-q-div", "plli2s-q-div", NULL,
+	"no-clock" };
+
 struct stm32_aux_clk {
 	int idx;
 	const char *name;
@@ -983,6 +986,18 @@ struct stm32f4_clk_data {
 		NO_GATE, 0,
 		CLK_SET_RATE_PARENT
 	},
+	{
+		CLK_SAI1, "sai1-a", sai_parents, ARRAY_SIZE(sai_parents),
+		STM32F4_RCC_DCKCFGR, 20, 3,
+		STM32F4_RCC_APB2ENR, 22,
+		CLK_SET_RATE_PARENT
+	},
+	{
+		CLK_SAI2, "sai1-b", sai_parents, ARRAY_SIZE(sai_parents),
+		STM32F4_RCC_DCKCFGR, 22, 3,
+		STM32F4_RCC_APB2ENR, 22,
+		CLK_SET_RATE_PARENT
+	},
 };
 
 static const struct stm32f4_clk_data stm32f429_clk_data = {
@@ -1115,6 +1130,7 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 	i2s_in_clk = of_clk_get_parent_name(np, 1);
 
 	i2s_parents[1] = i2s_in_clk;
+	sai_parents[2] = i2s_in_clk;
 
 	clk_register_fixed_rate_with_accuracy(NULL, "hsi", NULL, 0,
 			16000000, 160000);
-- 
1.9.1

Re: [PATCH v4 6/9] clk: stm32f4: Add SAI clocks

[Stephen Boyd]

On 12/13, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> This patch introduces SAI clocks for stm32f4 socs.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---

Applied to clk-stm32f4 and merged into clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v4 6/9] clk: stm32f4: Add SAI clocks

[Stephen Boyd]

On 12/13, gabriel.fernandez at st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> This patch introduces SAI clocks for stm32f4 socs.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---

Applied to clk-stm32f4 and merged into clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v4 7/9] clk: stm32f4: SDIO & 48Mhz clock management for STM32F469 board

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

In the stm32f469 soc, the 48Mhz clock could be derived from pll-q or
from pll-sai-p.

The SDIO clock could be also derived from 48Mhz or from sys clock.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 drivers/clk/clk-stm32f4.c | 49 ++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 46 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index 2bff436..11174a5 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -211,7 +211,7 @@ struct stm32f4_gate_data {
 	{ STM32F4_RCC_APB2ENR,  8,	"adc1",		"apb2_div" },
 	{ STM32F4_RCC_APB2ENR,  9,	"adc2",		"apb2_div" },
 	{ STM32F4_RCC_APB2ENR, 10,	"adc3",		"apb2_div" },
-	{ STM32F4_RCC_APB2ENR, 11,	"sdio",		"pll48" },
+	{ STM32F4_RCC_APB2ENR, 11,	"sdio",		"sdmux" },
 	{ STM32F4_RCC_APB2ENR, 12,	"spi1",		"apb2_div" },
 	{ STM32F4_RCC_APB2ENR, 13,	"spi4",		"apb2_div" },
 	{ STM32F4_RCC_APB2ENR, 14,	"syscfg",	"apb2_div" },
@@ -951,6 +951,10 @@ static struct clk_hw *stm32_register_cclk(struct device *dev, const char *name,
 static const char *sai_parents[4] = { "pllsai-q-div", "plli2s-q-div", NULL,
 	"no-clock" };
 
+static const char *pll48_parents[2] = { "pll-q", "pllsai-p" };
+
+static const char *sdmux_parents[2] = { "pll48", "sys" };
+
 struct stm32_aux_clk {
 	int idx;
 	const char *name;
@@ -1000,6 +1004,45 @@ struct stm32f4_clk_data {
 	},
 };
 
+static const struct stm32_aux_clk stm32f469_aux_clk[] = {
+	{
+		CLK_LCD, "lcd-tft", lcd_parent, ARRAY_SIZE(lcd_parent),
+		NO_MUX, 0, 0,
+		STM32F4_RCC_APB2ENR, 26,
+		CLK_SET_RATE_PARENT
+	},
+	{
+		CLK_I2S, "i2s", i2s_parents, ARRAY_SIZE(i2s_parents),
+		STM32F4_RCC_CFGR, 23, 1,
+		NO_GATE, 0,
+		CLK_SET_RATE_PARENT
+	},
+	{
+		CLK_SAI1, "sai1-a", sai_parents, ARRAY_SIZE(sai_parents),
+		STM32F4_RCC_DCKCFGR, 20, 3,
+		STM32F4_RCC_APB2ENR, 22,
+		CLK_SET_RATE_PARENT
+	},
+	{
+		CLK_SAI2, "sai1-b", sai_parents, ARRAY_SIZE(sai_parents),
+		STM32F4_RCC_DCKCFGR, 22, 3,
+		STM32F4_RCC_APB2ENR, 22,
+		CLK_SET_RATE_PARENT
+	},
+	{
+		NO_IDX, "pll48", pll48_parents, ARRAY_SIZE(pll48_parents),
+		STM32F4_RCC_DCKCFGR, 27, 1,
+		NO_GATE, 0,
+		0
+	},
+	{
+		NO_IDX, "sdmux", sdmux_parents, ARRAY_SIZE(sdmux_parents),
+		STM32F4_RCC_DCKCFGR, 28, 1,
+		NO_GATE, 0,
+		0
+	},
+};
+
 static const struct stm32f4_clk_data stm32f429_clk_data = {
 	.gates_data	= stm32f429_gates,
 	.gates_map	= stm32f42xx_gate_map,
@@ -1014,8 +1057,8 @@ struct stm32f4_clk_data {
 	.gates_map	= stm32f46xx_gate_map,
 	.gates_num	= ARRAY_SIZE(stm32f469_gates),
 	.pll_data	= stm32f469_pll,
-	.aux_clk	= stm32f429_aux_clk,
-	.aux_clk_num	= ARRAY_SIZE(stm32f429_aux_clk),
+	.aux_clk	= stm32f469_aux_clk,
+	.aux_clk_num	= ARRAY_SIZE(stm32f469_aux_clk),
 };
 
 static const struct of_device_id stm32f4_of_match[] = {
-- 
1.9.1

[PATCH v4 7/9] clk: stm32f4: SDIO & 48Mhz clock management for STM32F469 board

[gabriel.fernandez at st.com]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

In the stm32f469 soc, the 48Mhz clock could be derived from pll-q or
from pll-sai-p.

The SDIO clock could be also derived from 48Mhz or from sys clock.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 drivers/clk/clk-stm32f4.c | 49 ++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 46 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index 2bff436..11174a5 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -211,7 +211,7 @@ struct stm32f4_gate_data {
 	{ STM32F4_RCC_APB2ENR,  8,	"adc1",		"apb2_div" },
 	{ STM32F4_RCC_APB2ENR,  9,	"adc2",		"apb2_div" },
 	{ STM32F4_RCC_APB2ENR, 10,	"adc3",		"apb2_div" },
-	{ STM32F4_RCC_APB2ENR, 11,	"sdio",		"pll48" },
+	{ STM32F4_RCC_APB2ENR, 11,	"sdio",		"sdmux" },
 	{ STM32F4_RCC_APB2ENR, 12,	"spi1",		"apb2_div" },
 	{ STM32F4_RCC_APB2ENR, 13,	"spi4",		"apb2_div" },
 	{ STM32F4_RCC_APB2ENR, 14,	"syscfg",	"apb2_div" },
@@ -951,6 +951,10 @@ static struct clk_hw *stm32_register_cclk(struct device *dev, const char *name,
 static const char *sai_parents[4] = { "pllsai-q-div", "plli2s-q-div", NULL,
 	"no-clock" };
 
+static const char *pll48_parents[2] = { "pll-q", "pllsai-p" };
+
+static const char *sdmux_parents[2] = { "pll48", "sys" };
+
 struct stm32_aux_clk {
 	int idx;
 	const char *name;
@@ -1000,6 +1004,45 @@ struct stm32f4_clk_data {
 	},
 };
 
+static const struct stm32_aux_clk stm32f469_aux_clk[] = {
+	{
+		CLK_LCD, "lcd-tft", lcd_parent, ARRAY_SIZE(lcd_parent),
+		NO_MUX, 0, 0,
+		STM32F4_RCC_APB2ENR, 26,
+		CLK_SET_RATE_PARENT
+	},
+	{
+		CLK_I2S, "i2s", i2s_parents, ARRAY_SIZE(i2s_parents),
+		STM32F4_RCC_CFGR, 23, 1,
+		NO_GATE, 0,
+		CLK_SET_RATE_PARENT
+	},
+	{
+		CLK_SAI1, "sai1-a", sai_parents, ARRAY_SIZE(sai_parents),
+		STM32F4_RCC_DCKCFGR, 20, 3,
+		STM32F4_RCC_APB2ENR, 22,
+		CLK_SET_RATE_PARENT
+	},
+	{
+		CLK_SAI2, "sai1-b", sai_parents, ARRAY_SIZE(sai_parents),
+		STM32F4_RCC_DCKCFGR, 22, 3,
+		STM32F4_RCC_APB2ENR, 22,
+		CLK_SET_RATE_PARENT
+	},
+	{
+		NO_IDX, "pll48", pll48_parents, ARRAY_SIZE(pll48_parents),
+		STM32F4_RCC_DCKCFGR, 27, 1,
+		NO_GATE, 0,
+		0
+	},
+	{
+		NO_IDX, "sdmux", sdmux_parents, ARRAY_SIZE(sdmux_parents),
+		STM32F4_RCC_DCKCFGR, 28, 1,
+		NO_GATE, 0,
+		0
+	},
+};
+
 static const struct stm32f4_clk_data stm32f429_clk_data = {
 	.gates_data	= stm32f429_gates,
 	.gates_map	= stm32f42xx_gate_map,
@@ -1014,8 +1057,8 @@ struct stm32f4_clk_data {
 	.gates_map	= stm32f46xx_gate_map,
 	.gates_num	= ARRAY_SIZE(stm32f469_gates),
 	.pll_data	= stm32f469_pll,
-	.aux_clk	= stm32f429_aux_clk,
-	.aux_clk_num	= ARRAY_SIZE(stm32f429_aux_clk),
+	.aux_clk	= stm32f469_aux_clk,
+	.aux_clk_num	= ARRAY_SIZE(stm32f469_aux_clk),
 };
 
 static const struct of_device_id stm32f4_of_match[] = {
-- 
1.9.1

[PATCH v4 7/9] clk: stm32f4: SDIO & 48Mhz clock management for STM32F469 board

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

In the stm32f469 soc, the 48Mhz clock could be derived from pll-q or
from pll-sai-p.

The SDIO clock could be also derived from 48Mhz or from sys clock.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 drivers/clk/clk-stm32f4.c | 49 ++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 46 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index 2bff436..11174a5 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -211,7 +211,7 @@ struct stm32f4_gate_data {
 	{ STM32F4_RCC_APB2ENR,  8,	"adc1",		"apb2_div" },
 	{ STM32F4_RCC_APB2ENR,  9,	"adc2",		"apb2_div" },
 	{ STM32F4_RCC_APB2ENR, 10,	"adc3",		"apb2_div" },
-	{ STM32F4_RCC_APB2ENR, 11,	"sdio",		"pll48" },
+	{ STM32F4_RCC_APB2ENR, 11,	"sdio",		"sdmux" },
 	{ STM32F4_RCC_APB2ENR, 12,	"spi1",		"apb2_div" },
 	{ STM32F4_RCC_APB2ENR, 13,	"spi4",		"apb2_div" },
 	{ STM32F4_RCC_APB2ENR, 14,	"syscfg",	"apb2_div" },
@@ -951,6 +951,10 @@ static struct clk_hw *stm32_register_cclk(struct device *dev, const char *name,
 static const char *sai_parents[4] = { "pllsai-q-div", "plli2s-q-div", NULL,
 	"no-clock" };
 
+static const char *pll48_parents[2] = { "pll-q", "pllsai-p" };
+
+static const char *sdmux_parents[2] = { "pll48", "sys" };
+
 struct stm32_aux_clk {
 	int idx;
 	const char *name;
@@ -1000,6 +1004,45 @@ struct stm32f4_clk_data {
 	},
 };
 
+static const struct stm32_aux_clk stm32f469_aux_clk[] = {
+	{
+		CLK_LCD, "lcd-tft", lcd_parent, ARRAY_SIZE(lcd_parent),
+		NO_MUX, 0, 0,
+		STM32F4_RCC_APB2ENR, 26,
+		CLK_SET_RATE_PARENT
+	},
+	{
+		CLK_I2S, "i2s", i2s_parents, ARRAY_SIZE(i2s_parents),
+		STM32F4_RCC_CFGR, 23, 1,
+		NO_GATE, 0,
+		CLK_SET_RATE_PARENT
+	},
+	{
+		CLK_SAI1, "sai1-a", sai_parents, ARRAY_SIZE(sai_parents),
+		STM32F4_RCC_DCKCFGR, 20, 3,
+		STM32F4_RCC_APB2ENR, 22,
+		CLK_SET_RATE_PARENT
+	},
+	{
+		CLK_SAI2, "sai1-b", sai_parents, ARRAY_SIZE(sai_parents),
+		STM32F4_RCC_DCKCFGR, 22, 3,
+		STM32F4_RCC_APB2ENR, 22,
+		CLK_SET_RATE_PARENT
+	},
+	{
+		NO_IDX, "pll48", pll48_parents, ARRAY_SIZE(pll48_parents),
+		STM32F4_RCC_DCKCFGR, 27, 1,
+		NO_GATE, 0,
+		0
+	},
+	{
+		NO_IDX, "sdmux", sdmux_parents, ARRAY_SIZE(sdmux_parents),
+		STM32F4_RCC_DCKCFGR, 28, 1,
+		NO_GATE, 0,
+		0
+	},
+};
+
 static const struct stm32f4_clk_data stm32f429_clk_data = {
 	.gates_data	= stm32f429_gates,
 	.gates_map	= stm32f42xx_gate_map,
@@ -1014,8 +1057,8 @@ struct stm32f4_clk_data {
 	.gates_map	= stm32f46xx_gate_map,
 	.gates_num	= ARRAY_SIZE(stm32f469_gates),
 	.pll_data	= stm32f469_pll,
-	.aux_clk	= stm32f429_aux_clk,
-	.aux_clk_num	= ARRAY_SIZE(stm32f429_aux_clk),
+	.aux_clk	= stm32f469_aux_clk,
+	.aux_clk_num	= ARRAY_SIZE(stm32f469_aux_clk),
 };
 
 static const struct of_device_id stm32f4_of_match[] = {
-- 
1.9.1

Re: [PATCH v4 7/9] clk: stm32f4: SDIO & 48Mhz clock management for STM32F469 board

[Stephen Boyd]

On 12/13, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> In the stm32f469 soc, the 48Mhz clock could be derived from pll-q or
> from pll-sai-p.
> 
> The SDIO clock could be also derived from 48Mhz or from sys clock.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---

Applied to clk-stm32f4 and merged into clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v4 7/9] clk: stm32f4: SDIO & 48Mhz clock management for STM32F469 board

[Stephen Boyd]

On 12/13, gabriel.fernandez at st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> In the stm32f469 soc, the 48Mhz clock could be derived from pll-q or
> from pll-sai-p.
> 
> The SDIO clock could be also derived from 48Mhz or from sys clock.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---

Applied to clk-stm32f4 and merged into clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v4 8/9] ARM: dts: stm32f4: Add external I2S clock

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch adds an external I2S clock in the DT.
The I2S clock could be derived from an external I2S clock or by I2S pll.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 arch/arm/boot/dts/stm32f429.dtsi | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index e4dae0e..7c7dfbd 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -68,6 +68,12 @@
 			compatible = "fixed-clock";
 			clock-frequency = <32000>;
 		};
+
+		clk_i2s_ckin: i2s-ckin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
 	};
 
 	soc {
@@ -362,7 +368,7 @@
 			#clock-cells = <2>;
 			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
 			reg = <0x40023800 0x400>;
-			clocks = <&clk_hse>;
+			clocks = <&clk_hse>, <&clk_i2s_ckin>;
 			st,syscfg = <&pwrcfg>;
 		};
 
-- 
1.9.1

[PATCH v4 8/9] ARM: dts: stm32f4: Add external I2S clock

[gabriel.fernandez at st.com]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch adds an external I2S clock in the DT.
The I2S clock could be derived from an external I2S clock or by I2S pll.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 arch/arm/boot/dts/stm32f429.dtsi | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index e4dae0e..7c7dfbd 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -68,6 +68,12 @@
 			compatible = "fixed-clock";
 			clock-frequency = <32000>;
 		};
+
+		clk_i2s_ckin: i2s-ckin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
 	};
 
 	soc {
@@ -362,7 +368,7 @@
 			#clock-cells = <2>;
 			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
 			reg = <0x40023800 0x400>;
-			clocks = <&clk_hse>;
+			clocks = <&clk_hse>, <&clk_i2s_ckin>;
 			st,syscfg = <&pwrcfg>;
 		};
 
-- 
1.9.1

[PATCH v4 8/9] ARM: dts: stm32f4: Add external I2S clock

[gabriel.fernandez-qxv4g6HH51o]

From: Gabriel Fernandez <gabriel.fernandez-qxv4g6HH51o@public.gmane.org>

This patch adds an external I2S clock in the DT.
The I2S clock could be derived from an external I2S clock or by I2S pll.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez-qxv4g6HH51o@public.gmane.org>
---
 arch/arm/boot/dts/stm32f429.dtsi | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index e4dae0e..7c7dfbd 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -68,6 +68,12 @@
 			compatible = "fixed-clock";
 			clock-frequency = <32000>;
 		};
+
+		clk_i2s_ckin: i2s-ckin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
 	};
 
 	soc {
@@ -362,7 +368,7 @@
 			#clock-cells = <2>;
 			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
 			reg = <0x40023800 0x400>;
-			clocks = <&clk_hse>;
+			clocks = <&clk_hse>, <&clk_i2s_ckin>;
 			st,syscfg = <&pwrcfg>;
 		};
 
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v4 8/9] ARM: dts: stm32f4: Add external I2S clock

[Alexandre Torgue]

Hi

On 12/13/2016 03:20 PM, Gabriel FERNANDEZ wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>
> This patch adds an external I2S clock in the DT.
> The I2S clock could be derived from an external I2S clock or by I2S pll.
>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---
>  arch/arm/boot/dts/stm32f429.dtsi | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
> index e4dae0e..7c7dfbd 100644
> --- a/arch/arm/boot/dts/stm32f429.dtsi
> +++ b/arch/arm/boot/dts/stm32f429.dtsi
> @@ -68,6 +68,12 @@
>  			compatible = "fixed-clock";
>  			clock-frequency = <32000>;
>  		};
> +
> +		clk_i2s_ckin: i2s-ckin {
> +			#clock-cells = <0>;
> +			compatible = "fixed-clock";
> +			clock-frequency = <0>;
> +		};
>  	};
>
>  	soc {
> @@ -362,7 +368,7 @@
>  			#clock-cells = <2>;
>  			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
>  			reg = <0x40023800 0x400>;
> -			clocks = <&clk_hse>;
> +			clocks = <&clk_hse>, <&clk_i2s_ckin>;
>  			st,syscfg = <&pwrcfg>;
>  		};
>
>
Applied on stm32-dt-for-v4.11

Thanks

[PATCH v4 8/9] ARM: dts: stm32f4: Add external I2S clock

[Alexandre Torgue]

Hi

On 12/13/2016 03:20 PM, Gabriel FERNANDEZ wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>
> This patch adds an external I2S clock in the DT.
> The I2S clock could be derived from an external I2S clock or by I2S pll.
>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---
>  arch/arm/boot/dts/stm32f429.dtsi | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
> index e4dae0e..7c7dfbd 100644
> --- a/arch/arm/boot/dts/stm32f429.dtsi
> +++ b/arch/arm/boot/dts/stm32f429.dtsi
> @@ -68,6 +68,12 @@
>  			compatible = "fixed-clock";
>  			clock-frequency = <32000>;
>  		};
> +
> +		clk_i2s_ckin: i2s-ckin {
> +			#clock-cells = <0>;
> +			compatible = "fixed-clock";
> +			clock-frequency = <0>;
> +		};
>  	};
>
>  	soc {
> @@ -362,7 +368,7 @@
>  			#clock-cells = <2>;
>  			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
>  			reg = <0x40023800 0x400>;
> -			clocks = <&clk_hse>;
> +			clocks = <&clk_hse>, <&clk_i2s_ckin>;
>  			st,syscfg = <&pwrcfg>;
>  		};
>
>
Applied on stm32-dt-for-v4.11

Thanks

Re: [PATCH v4 8/9] ARM: dts: stm32f4: Add external I2S clock

[Alexandre Torgue]

Hi

On 12/13/2016 03:20 PM, Gabriel FERNANDEZ wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>
> This patch adds an external I2S clock in the DT.
> The I2S clock could be derived from an external I2S clock or by I2S pll.
>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---
>  arch/arm/boot/dts/stm32f429.dtsi | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
> index e4dae0e..7c7dfbd 100644
> --- a/arch/arm/boot/dts/stm32f429.dtsi
> +++ b/arch/arm/boot/dts/stm32f429.dtsi
> @@ -68,6 +68,12 @@
>  			compatible = "fixed-clock";
>  			clock-frequency = <32000>;
>  		};
> +
> +		clk_i2s_ckin: i2s-ckin {
> +			#clock-cells = <0>;
> +			compatible = "fixed-clock";
> +			clock-frequency = <0>;
> +		};
>  	};
>
>  	soc {
> @@ -362,7 +368,7 @@
>  			#clock-cells = <2>;
>  			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
>  			reg = <0x40023800 0x400>;
> -			clocks = <&clk_hse>;
> +			clocks = <&clk_hse>, <&clk_i2s_ckin>;
>  			st,syscfg = <&pwrcfg>;
>  		};
>
>
Applied on stm32-dt-for-v4.11

Thanks

Re: [PATCH v4 8/9] ARM: dts: stm32f4: Add external I2S clock

[Alexandre Torgue]

Hi

On 12/13/2016 03:20 PM, Gabriel FERNANDEZ wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>
> This patch adds an external I2S clock in the DT.
> The I2S clock could be derived from an external I2S clock or by I2S pll.
>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---
>  arch/arm/boot/dts/stm32f429.dtsi | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
> index e4dae0e..7c7dfbd 100644
> --- a/arch/arm/boot/dts/stm32f429.dtsi
> +++ b/arch/arm/boot/dts/stm32f429.dtsi
> @@ -68,6 +68,12 @@
>  			compatible = "fixed-clock";
>  			clock-frequency = <32000>;
>  		};
> +
> +		clk_i2s_ckin: i2s-ckin {
> +			#clock-cells = <0>;
> +			compatible = "fixed-clock";
> +			clock-frequency = <0>;
> +		};
>  	};
>
>  	soc {
> @@ -362,7 +368,7 @@
>  			#clock-cells = <2>;
>  			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
>  			reg = <0x40023800 0x400>;
> -			clocks = <&clk_hse>;
> +			clocks = <&clk_hse>, <&clk_i2s_ckin>;
>  			st,syscfg = <&pwrcfg>;
>  		};
>
>
Applied on stm32-dt-for-v4.11

Thanks

[PATCH v4 9/9] ARM: dts: stm32f4: Include auxiliary stm32fx clock definition

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch include auxiliary clock definition (clocks which are not derived
from system clock.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 arch/arm/boot/dts/stm32f429.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 7c7dfbd..041e3fc 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -48,6 +48,7 @@
 #include "skeleton.dtsi"
 #include "armv7-m.dtsi"
 #include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
+#include <dt-bindings/clock/stm32fx-clock.h>
 
 / {
 	clocks {
-- 
1.9.1

[PATCH v4 9/9] ARM: dts: stm32f4: Include auxiliary stm32fx clock definition

[gabriel.fernandez at st.com]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch include auxiliary clock definition (clocks which are not derived
from system clock.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 arch/arm/boot/dts/stm32f429.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 7c7dfbd..041e3fc 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -48,6 +48,7 @@
 #include "skeleton.dtsi"
 #include "armv7-m.dtsi"
 #include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
+#include <dt-bindings/clock/stm32fx-clock.h>
 
 / {
 	clocks {
-- 
1.9.1

[PATCH v4 9/9] ARM: dts: stm32f4: Include auxiliary stm32fx clock definition

[gabriel.fernandez]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

This patch include auxiliary clock definition (clocks which are not derived
from system clock.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 arch/arm/boot/dts/stm32f429.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 7c7dfbd..041e3fc 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -48,6 +48,7 @@
 #include "skeleton.dtsi"
 #include "armv7-m.dtsi"
 #include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
+#include <dt-bindings/clock/stm32fx-clock.h>
 
 / {
 	clocks {
-- 
1.9.1

Re: [PATCH v4 9/9] ARM: dts: stm32f4: Include auxiliary stm32fx clock definition

[Alexandre Torgue]

hi

On 12/13/2016 03:20 PM, Gabriel FERNANDEZ wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>
> This patch include auxiliary clock definition (clocks which are not derived
> from system clock.
>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---
>  arch/arm/boot/dts/stm32f429.dtsi | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
> index 7c7dfbd..041e3fc 100644
> --- a/arch/arm/boot/dts/stm32f429.dtsi
> +++ b/arch/arm/boot/dts/stm32f429.dtsi
> @@ -48,6 +48,7 @@
>  #include "skeleton.dtsi"
>  #include "armv7-m.dtsi"
>  #include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
> +#include <dt-bindings/clock/stm32fx-clock.h>
>
>  / {
>  	clocks {
>
Applied on stm32-dt-for-v4.11

Thanks

[PATCH v4 9/9] ARM: dts: stm32f4: Include auxiliary stm32fx clock definition

[Alexandre Torgue]

hi

On 12/13/2016 03:20 PM, Gabriel FERNANDEZ wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>
> This patch include auxiliary clock definition (clocks which are not derived
> from system clock.
>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---
>  arch/arm/boot/dts/stm32f429.dtsi | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
> index 7c7dfbd..041e3fc 100644
> --- a/arch/arm/boot/dts/stm32f429.dtsi
> +++ b/arch/arm/boot/dts/stm32f429.dtsi
> @@ -48,6 +48,7 @@
>  #include "skeleton.dtsi"
>  #include "armv7-m.dtsi"
>  #include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
> +#include <dt-bindings/clock/stm32fx-clock.h>
>
>  / {
>  	clocks {
>
Applied on stm32-dt-for-v4.11

Thanks

Re: [PATCH v4 9/9] ARM: dts: stm32f4: Include auxiliary stm32fx clock definition

[Alexandre Torgue]

hi

On 12/13/2016 03:20 PM, Gabriel FERNANDEZ wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>
> This patch include auxiliary clock definition (clocks which are not derived
> from system clock.
>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---
>  arch/arm/boot/dts/stm32f429.dtsi | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
> index 7c7dfbd..041e3fc 100644
> --- a/arch/arm/boot/dts/stm32f429.dtsi
> +++ b/arch/arm/boot/dts/stm32f429.dtsi
> @@ -48,6 +48,7 @@
>  #include "skeleton.dtsi"
>  #include "armv7-m.dtsi"
>  #include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
> +#include <dt-bindings/clock/stm32fx-clock.h>
>
>  / {
>  	clocks {
>
Applied on stm32-dt-for-v4.11

Thanks

Re: [PATCH v4 9/9] ARM: dts: stm32f4: Include auxiliary stm32fx clock definition

[Alexandre Torgue]

hi

On 12/13/2016 03:20 PM, Gabriel FERNANDEZ wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>
> This patch include auxiliary clock definition (clocks which are not derived
> from system clock.
>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---
>  arch/arm/boot/dts/stm32f429.dtsi | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
> index 7c7dfbd..041e3fc 100644
> --- a/arch/arm/boot/dts/stm32f429.dtsi
> +++ b/arch/arm/boot/dts/stm32f429.dtsi
> @@ -48,6 +48,7 @@
>  #include "skeleton.dtsi"
>  #include "armv7-m.dtsi"
>  #include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
> +#include <dt-bindings/clock/stm32fx-clock.h>
>
>  / {
>  	clocks {
>
Applied on stm32-dt-for-v4.11

Thanks