* [PATCH v2] ARM: omap3: beagleboard-xm: dt: Add ethernet to the device tree @ 2016-12-02 21:11 Laurent Pinchart [not found] ` <1480713097-5931-1-git-send-email-laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> 0 siblings, 1 reply; 8+ messages in thread From: Laurent Pinchart @ 2016-12-02 21:11 UTC (permalink / raw) To: linux-omap-u79uwXL29TY76Z2rM5mHXA Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Tony Lindgren, Benoît Cousson The Beagleboard-xM has a LAN9514 USB hub and ethernet controller, connected to port 2 of the OMAP EHCI controller. The board however has no EEPROM to store the ethernet MAC address, which is programmed by the boot loader. To allow Linux to use the same MAC address as the boot loader (or for that matter any fixed MAC address), we need a node in the device tree for the ethernet controller that the boot loader can update at runtime with a local-mac-address property. Add it, along with an alias for the ethernet controller to let the boot loader locate it easily. Signed-off-by: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> --- Changes since v1: - Renamed usb2 DT node to hub --- arch/arm/boot/dts/omap3-beagle-xm.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 85e297ed0ea1..673cee2234b2 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -27,6 +27,7 @@ aliases { display0 = &dvi0; display1 = &tv0; + ethernet = ðernet; }; leds { @@ -348,6 +349,21 @@ &usbhsehci { phys = <0 &hsusb2_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + hub@2 { + compatible = "usb424,9514"; + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb424,ec00"; + reg = <1>; + }; + }; }; &vaux2 { -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 8+ messages in thread
[parent not found: <1480713097-5931-1-git-send-email-laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>]
* Re: [PATCH v2] ARM: omap3: beagleboard-xm: dt: Add ethernet to the device tree [not found] ` <1480713097-5931-1-git-send-email-laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> @ 2017-01-05 16:19 ` Tony Lindgren 2017-01-05 16:27 ` Rob Herring 1 sibling, 0 replies; 8+ messages in thread From: Tony Lindgren @ 2017-01-05 16:19 UTC (permalink / raw) To: Laurent Pinchart Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA, devicetree-u79uwXL29TY76Z2rM5mHXA, Benoît Cousson * Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> [161202 13:11]: > The Beagleboard-xM has a LAN9514 USB hub and ethernet controller, > connected to port 2 of the OMAP EHCI controller. The board however has > no EEPROM to store the ethernet MAC address, which is programmed by the > boot loader. > > To allow Linux to use the same MAC address as the boot loader (or for > that matter any fixed MAC address), we need a node in the device tree > for the ethernet controller that the boot loader can update at runtime > with a local-mac-address property. Add it, along with an alias for the > ethernet controller to let the boot loader locate it easily. > > Signed-off-by: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> > --- > Changes since v1: > > - Renamed usb2 DT node to hub Applying this finally into omap-for-v4.11/dt. Will post my related patches using the hub naming shortly. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2] ARM: omap3: beagleboard-xm: dt: Add ethernet to the device tree [not found] ` <1480713097-5931-1-git-send-email-laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> 2017-01-05 16:19 ` Tony Lindgren @ 2017-01-05 16:27 ` Rob Herring [not found] ` <CAL_Jsq+M7RWiytEA7zPZvR+7CK37WCxN5ZBOQkpjdswjLHL4fA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 1 sibling, 1 reply; 8+ messages in thread From: Rob Herring @ 2017-01-05 16:27 UTC (permalink / raw) To: Laurent Pinchart Cc: linux-omap, devicetree-u79uwXL29TY76Z2rM5mHXA, Tony Lindgren, Benoît Cousson On Fri, Dec 2, 2016 at 3:11 PM, Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> wrote: > The Beagleboard-xM has a LAN9514 USB hub and ethernet controller, > connected to port 2 of the OMAP EHCI controller. The board however has > no EEPROM to store the ethernet MAC address, which is programmed by the > boot loader. > > To allow Linux to use the same MAC address as the boot loader (or for > that matter any fixed MAC address), we need a node in the device tree > for the ethernet controller that the boot loader can update at runtime > with a local-mac-address property. Add it, along with an alias for the > ethernet controller to let the boot loader locate it easily. > > Signed-off-by: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> > --- > Changes since v1: > > - Renamed usb2 DT node to hub > --- > arch/arm/boot/dts/omap3-beagle-xm.dts | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts > index 85e297ed0ea1..673cee2234b2 100644 > --- a/arch/arm/boot/dts/omap3-beagle-xm.dts > +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts > @@ -27,6 +27,7 @@ > aliases { > display0 = &dvi0; > display1 = &tv0; > + ethernet = ðernet; Sorry, just noticed this, but this should be dropped. It's not used nor do we want an alias here. Rob P.S. The display ones are questionable, too. Only OMAP has them and per platform alias names is not something we want. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <CAL_Jsq+M7RWiytEA7zPZvR+7CK37WCxN5ZBOQkpjdswjLHL4fA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH v2] ARM: omap3: beagleboard-xm: dt: Add ethernet to the device tree [not found] ` <CAL_Jsq+M7RWiytEA7zPZvR+7CK37WCxN5ZBOQkpjdswjLHL4fA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2017-01-05 16:39 ` Tony Lindgren [not found] ` <20170105163928.GD4310-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> 0 siblings, 1 reply; 8+ messages in thread From: Tony Lindgren @ 2017-01-05 16:39 UTC (permalink / raw) To: Rob Herring Cc: Laurent Pinchart, linux-omap, devicetree-u79uwXL29TY76Z2rM5mHXA, Benoît Cousson * Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> [170105 08:28]: > On Fri, Dec 2, 2016 at 3:11 PM, Laurent Pinchart > <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> wrote: > > The Beagleboard-xM has a LAN9514 USB hub and ethernet controller, > > connected to port 2 of the OMAP EHCI controller. The board however has > > no EEPROM to store the ethernet MAC address, which is programmed by the > > boot loader. > > > > To allow Linux to use the same MAC address as the boot loader (or for > > that matter any fixed MAC address), we need a node in the device tree > > for the ethernet controller that the boot loader can update at runtime > > with a local-mac-address property. Add it, along with an alias for the > > ethernet controller to let the boot loader locate it easily. > > > > Signed-off-by: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> > > --- > > Changes since v1: > > > > - Renamed usb2 DT node to hub > > --- > > arch/arm/boot/dts/omap3-beagle-xm.dts | 16 ++++++++++++++++ > > 1 file changed, 16 insertions(+) > > > > diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts > > index 85e297ed0ea1..673cee2234b2 100644 > > --- a/arch/arm/boot/dts/omap3-beagle-xm.dts > > +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts > > @@ -27,6 +27,7 @@ > > aliases { > > display0 = &dvi0; > > display1 = &tv0; > > + ethernet = ðernet; > > Sorry, just noticed this, but this should be dropped. It's not used > nor do we want an alias here. OK, will update locally as I have not pushed out yet. > P.S. The display ones are questionable, too. Only OMAP has them and > per platform alias names is not something we want. OK. What about the mmc ones? Otherwise the MMC devices keep moving around depending on the kernel version.. Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <20170105163928.GD4310-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>]
* Re: [PATCH v2] ARM: omap3: beagleboard-xm: dt: Add ethernet to the device tree [not found] ` <20170105163928.GD4310-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> @ 2017-01-05 16:48 ` Laurent Pinchart 2017-01-05 16:51 ` Tony Lindgren 2017-01-05 18:50 ` Rob Herring 0 siblings, 2 replies; 8+ messages in thread From: Laurent Pinchart @ 2017-01-05 16:48 UTC (permalink / raw) To: Tony Lindgren Cc: Rob Herring, linux-omap, devicetree-u79uwXL29TY76Z2rM5mHXA, Benoît Cousson Hello, On Thursday 05 Jan 2017 08:39:29 Tony Lindgren wrote: > * Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> [170105 08:28]: > > On Fri, Dec 2, 2016 at 3:11 PM, Laurent Pinchart wrote: > >> The Beagleboard-xM has a LAN9514 USB hub and ethernet controller, > >> connected to port 2 of the OMAP EHCI controller. The board however has > >> no EEPROM to store the ethernet MAC address, which is programmed by the > >> boot loader. > >> > >> To allow Linux to use the same MAC address as the boot loader (or for > >> that matter any fixed MAC address), we need a node in the device tree > >> for the ethernet controller that the boot loader can update at runtime > >> with a local-mac-address property. Add it, along with an alias for the > >> ethernet controller to let the boot loader locate it easily. > >> > >> Signed-off-by: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> > >> --- > >> Changes since v1: > >> > >> - Renamed usb2 DT node to hub > >> --- > >> > >> arch/arm/boot/dts/omap3-beagle-xm.dts | 16 ++++++++++++++++ > >> 1 file changed, 16 insertions(+) > >> > >> diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts > >> b/arch/arm/boot/dts/omap3-beagle-xm.dts index > >> 85e297ed0ea1..673cee2234b2 100644 > >> --- a/arch/arm/boot/dts/omap3-beagle-xm.dts > >> +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts > >> @@ -27,6 +27,7 @@ > >> aliases { > >> display0 = &dvi0; > >> display1 = &tv0; > >> + ethernet = ðernet; > > > > Sorry, just noticed this, but this should be dropped. It's not used > > nor do we want an alias here. > > OK, will update locally as I have not pushed out yet. The ethernet alias is used by U-Boot to locate the ethernet controller and update the MAC address. > > P.S. The display ones are questionable, too. Only OMAP has them and > > per platform alias names is not something we want. > > OK. What about the mmc ones? Otherwise the MMC devices keep moving > around depending on the kernel version.. -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2] ARM: omap3: beagleboard-xm: dt: Add ethernet to the device tree 2017-01-05 16:48 ` Laurent Pinchart @ 2017-01-05 16:51 ` Tony Lindgren 2017-01-05 18:50 ` Rob Herring 1 sibling, 0 replies; 8+ messages in thread From: Tony Lindgren @ 2017-01-05 16:51 UTC (permalink / raw) To: Laurent Pinchart Cc: Rob Herring, linux-omap, devicetree-u79uwXL29TY76Z2rM5mHXA, Benoît Cousson * Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> [170105 08:49]: > On Thursday 05 Jan 2017 08:39:29 Tony Lindgren wrote: > > * Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> [170105 08:28]: > > > On Fri, Dec 2, 2016 at 3:11 PM, Laurent Pinchart wrote: > > >> The Beagleboard-xM has a LAN9514 USB hub and ethernet controller, > > >> connected to port 2 of the OMAP EHCI controller. The board however has > > >> no EEPROM to store the ethernet MAC address, which is programmed by the > > >> boot loader. > > >> > > >> To allow Linux to use the same MAC address as the boot loader (or for > > >> that matter any fixed MAC address), we need a node in the device tree > > >> for the ethernet controller that the boot loader can update at runtime > > >> with a local-mac-address property. Add it, along with an alias for the > > >> ethernet controller to let the boot loader locate it easily. > > >> > > >> Signed-off-by: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> > > >> --- > > >> Changes since v1: > > >> > > >> - Renamed usb2 DT node to hub > > >> --- > > >> > > >> arch/arm/boot/dts/omap3-beagle-xm.dts | 16 ++++++++++++++++ > > >> 1 file changed, 16 insertions(+) > > >> > > >> diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts > > >> b/arch/arm/boot/dts/omap3-beagle-xm.dts index > > >> 85e297ed0ea1..673cee2234b2 100644 > > >> --- a/arch/arm/boot/dts/omap3-beagle-xm.dts > > >> +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts > > >> @@ -27,6 +27,7 @@ > > >> aliases { > > >> display0 = &dvi0; > > >> display1 = &tv0; > > >> + ethernet = ðernet; > > > > > > Sorry, just noticed this, but this should be dropped. It's not used > > > nor do we want an alias here. > > > > OK, will update locally as I have not pushed out yet. > > The ethernet alias is used by U-Boot to locate the ethernet controller and > update the MAC address. OK let's wait a bit on this one then. Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2] ARM: omap3: beagleboard-xm: dt: Add ethernet to the device tree 2017-01-05 16:48 ` Laurent Pinchart 2017-01-05 16:51 ` Tony Lindgren @ 2017-01-05 18:50 ` Rob Herring [not found] ` <CAL_JsqKQLd2SFNVKwZDPTKL-spWknEe5aFDT5RZoCnV1qOP=4Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 1 sibling, 1 reply; 8+ messages in thread From: Rob Herring @ 2017-01-05 18:50 UTC (permalink / raw) To: Laurent Pinchart, Tony Lindgren Cc: linux-omap, devicetree-u79uwXL29TY76Z2rM5mHXA, Benoît Cousson On Thu, Jan 5, 2017 at 10:48 AM, Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> wrote: > Hello, > > On Thursday 05 Jan 2017 08:39:29 Tony Lindgren wrote: >> * Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> [170105 08:28]: >> > On Fri, Dec 2, 2016 at 3:11 PM, Laurent Pinchart wrote: >> >> The Beagleboard-xM has a LAN9514 USB hub and ethernet controller, >> >> connected to port 2 of the OMAP EHCI controller. The board however has >> >> no EEPROM to store the ethernet MAC address, which is programmed by the >> >> boot loader. >> >> >> >> To allow Linux to use the same MAC address as the boot loader (or for >> >> that matter any fixed MAC address), we need a node in the device tree >> >> for the ethernet controller that the boot loader can update at runtime >> >> with a local-mac-address property. Add it, along with an alias for the >> >> ethernet controller to let the boot loader locate it easily. >> >> >> >> Signed-off-by: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> >> >> --- >> >> Changes since v1: >> >> >> >> - Renamed usb2 DT node to hub >> >> --- >> >> >> >> arch/arm/boot/dts/omap3-beagle-xm.dts | 16 ++++++++++++++++ >> >> 1 file changed, 16 insertions(+) >> >> >> >> diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts >> >> b/arch/arm/boot/dts/omap3-beagle-xm.dts index >> >> 85e297ed0ea1..673cee2234b2 100644 >> >> --- a/arch/arm/boot/dts/omap3-beagle-xm.dts >> >> +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts >> >> @@ -27,6 +27,7 @@ >> >> aliases { >> >> display0 = &dvi0; >> >> display1 = &tv0; >> >> + ethernet = ðernet; >> > >> > Sorry, just noticed this, but this should be dropped. It's not used >> > nor do we want an alias here. >> >> OK, will update locally as I have not pushed out yet. > > The ethernet alias is used by U-Boot to locate the ethernet controller and > update the MAC address. Okay. Though with only only one, I don't see why that is hard to find. Anyway, this is the least of u-boot's DT abuses. >> > P.S. The display ones are questionable, too. Only OMAP has them and >> > per platform alias names is not something we want. >> >> OK. What about the mmc ones? Otherwise the MMC devices keep moving >> around depending on the kernel version.. This is a solved problem. Consistent dev numbering is not a feature of the kernel and MMC is not special. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <CAL_JsqKQLd2SFNVKwZDPTKL-spWknEe5aFDT5RZoCnV1qOP=4Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH v2] ARM: omap3: beagleboard-xm: dt: Add ethernet to the device tree [not found] ` <CAL_JsqKQLd2SFNVKwZDPTKL-spWknEe5aFDT5RZoCnV1qOP=4Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2017-01-06 16:49 ` Tony Lindgren 0 siblings, 0 replies; 8+ messages in thread From: Tony Lindgren @ 2017-01-06 16:49 UTC (permalink / raw) To: Rob Herring Cc: Laurent Pinchart, linux-omap, devicetree-u79uwXL29TY76Z2rM5mHXA, Benoît Cousson * Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> [170105 10:51]: > On Thu, Jan 5, 2017 at 10:48 AM, Laurent Pinchart > <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> wrote: > > Hello, > > > > On Thursday 05 Jan 2017 08:39:29 Tony Lindgren wrote: > >> * Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> [170105 08:28]: > >> > On Fri, Dec 2, 2016 at 3:11 PM, Laurent Pinchart wrote: > >> >> The Beagleboard-xM has a LAN9514 USB hub and ethernet controller, > >> >> connected to port 2 of the OMAP EHCI controller. The board however has > >> >> no EEPROM to store the ethernet MAC address, which is programmed by the > >> >> boot loader. > >> >> > >> >> To allow Linux to use the same MAC address as the boot loader (or for > >> >> that matter any fixed MAC address), we need a node in the device tree > >> >> for the ethernet controller that the boot loader can update at runtime > >> >> with a local-mac-address property. Add it, along with an alias for the > >> >> ethernet controller to let the boot loader locate it easily. > >> >> > >> >> Signed-off-by: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> > >> >> --- > >> >> Changes since v1: > >> >> > >> >> - Renamed usb2 DT node to hub > >> >> --- > >> >> > >> >> arch/arm/boot/dts/omap3-beagle-xm.dts | 16 ++++++++++++++++ > >> >> 1 file changed, 16 insertions(+) > >> >> > >> >> diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts > >> >> b/arch/arm/boot/dts/omap3-beagle-xm.dts index > >> >> 85e297ed0ea1..673cee2234b2 100644 > >> >> --- a/arch/arm/boot/dts/omap3-beagle-xm.dts > >> >> +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts > >> >> @@ -27,6 +27,7 @@ > >> >> aliases { > >> >> display0 = &dvi0; > >> >> display1 = &tv0; > >> >> + ethernet = ðernet; > >> > > >> > Sorry, just noticed this, but this should be dropped. It's not used > >> > nor do we want an alias here. > >> > >> OK, will update locally as I have not pushed out yet. > > > > The ethernet alias is used by U-Boot to locate the ethernet controller and > > update the MAC address. > > Okay. Though with only only one, I don't see why that is hard to find. > Anyway, this is the least of u-boot's DT abuses. Applying Laurent's original patch then into omap-for-v4.11/dt. Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2017-01-06 16:49 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-12-02 21:11 [PATCH v2] ARM: omap3: beagleboard-xm: dt: Add ethernet to the device tree Laurent Pinchart [not found] ` <1480713097-5931-1-git-send-email-laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> 2017-01-05 16:19 ` Tony Lindgren 2017-01-05 16:27 ` Rob Herring [not found] ` <CAL_Jsq+M7RWiytEA7zPZvR+7CK37WCxN5ZBOQkpjdswjLHL4fA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2017-01-05 16:39 ` Tony Lindgren [not found] ` <20170105163928.GD4310-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> 2017-01-05 16:48 ` Laurent Pinchart 2017-01-05 16:51 ` Tony Lindgren 2017-01-05 18:50 ` Rob Herring [not found] ` <CAL_JsqKQLd2SFNVKwZDPTKL-spWknEe5aFDT5RZoCnV1qOP=4Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2017-01-06 16:49 ` Tony Lindgren
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.