From: Bruno Herrera <bruherrera@gmail.com> To: robh+dt@kernel.org, mark.rutland@arm.com, mcoquelin.stm32@gmail.com, alexandre.torgue@st.com, johnyoun@synopsys.com, felipe.balbi@linux.intel.com Cc: devicetree@vger.kernel.org, linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 0/5] usb: dwc2: Add support for USB OTG on STM32F4x9 Date: Tue, 17 Jan 2017 14:12:32 -0200 [thread overview] Message-ID: <20170117161237.3802-1-bruherrera@gmail.com> (raw) The STM32F4x9 MCU family has two DWC2 USB OTG cores on it. One core is USB OTG FS and other core is USB OTG HS. The USB FS core only works with its internal phy whilst the USF HS core can work in HS with external ulpi phy or in FS/LS speed with the embedded FS PHY. The goal of this patch series is to enable the use of USB OTG FS/HS cores in FS mode using the internal phy. Changes since v3: - Removed commented lines from patch (sent by mistake) - Split DTS patch by boards and SOC - Removed unnecessary pinctrl nodes from DTS files Changes since v2: - Rename driver variables to meet the driver standard - Add compatible string for HS core Changes since v1: - Add dwc2_core_params structure for stm32f4 otg fs - Add compatible string for FS core/mode - Use GGPIO register to deativate power down of the phy Bruno Herrera (5): usb: dwc2: Add support for STM32F429/439/469 USB OTG HS/FS in FS mode (internal PHY) ARM: dts: stm32: Add USB FS support for STM32F429 MCU ARM: dts: stm32: Enable USB FS on stm32f469-disco ARM: dts: stm32: Enable USB HS in FS mode (embedded phy) on stm32f429-disco dt-bindings: Document the STM32 USB OTG DWC2 core binding Documentation/devicetree/bindings/usb/dwc2.txt | 4 ++ arch/arm/boot/dts/stm32f429-disco.dts | 16 ++++++++ arch/arm/boot/dts/stm32f429.dtsi | 31 ++++++++++++++++ arch/arm/boot/dts/stm32f469-disco.dts | 16 ++++++++ drivers/usb/dwc2/core.h | 4 ++ drivers/usb/dwc2/hcd.c | 13 ++++++- drivers/usb/dwc2/hw.h | 2 + drivers/usb/dwc2/params.c | 51 ++++++++++++++++++++++++++ 8 files changed, 136 insertions(+), 1 deletion(-) -- 2.10.1 (Apple Git-78)
WARNING: multiple messages have this Message-ID (diff)
From: bruherrera@gmail.com (Bruno Herrera) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 0/5] usb: dwc2: Add support for USB OTG on STM32F4x9 Date: Tue, 17 Jan 2017 14:12:32 -0200 [thread overview] Message-ID: <20170117161237.3802-1-bruherrera@gmail.com> (raw) The STM32F4x9 MCU family has two DWC2 USB OTG cores on it. One core is USB OTG FS and other core is USB OTG HS. The USB FS core only works with its internal phy whilst the USF HS core can work in HS with external ulpi phy or in FS/LS speed with the embedded FS PHY. The goal of this patch series is to enable the use of USB OTG FS/HS cores in FS mode using the internal phy. Changes since v3: - Removed commented lines from patch (sent by mistake) - Split DTS patch by boards and SOC - Removed unnecessary pinctrl nodes from DTS files Changes since v2: - Rename driver variables to meet the driver standard - Add compatible string for HS core Changes since v1: - Add dwc2_core_params structure for stm32f4 otg fs - Add compatible string for FS core/mode - Use GGPIO register to deativate power down of the phy Bruno Herrera (5): usb: dwc2: Add support for STM32F429/439/469 USB OTG HS/FS in FS mode (internal PHY) ARM: dts: stm32: Add USB FS support for STM32F429 MCU ARM: dts: stm32: Enable USB FS on stm32f469-disco ARM: dts: stm32: Enable USB HS in FS mode (embedded phy) on stm32f429-disco dt-bindings: Document the STM32 USB OTG DWC2 core binding Documentation/devicetree/bindings/usb/dwc2.txt | 4 ++ arch/arm/boot/dts/stm32f429-disco.dts | 16 ++++++++ arch/arm/boot/dts/stm32f429.dtsi | 31 ++++++++++++++++ arch/arm/boot/dts/stm32f469-disco.dts | 16 ++++++++ drivers/usb/dwc2/core.h | 4 ++ drivers/usb/dwc2/hcd.c | 13 ++++++- drivers/usb/dwc2/hw.h | 2 + drivers/usb/dwc2/params.c | 51 ++++++++++++++++++++++++++ 8 files changed, 136 insertions(+), 1 deletion(-) -- 2.10.1 (Apple Git-78)
next reply other threads:[~2017-01-17 16:12 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-01-17 16:12 Bruno Herrera [this message] 2017-01-17 16:12 ` [PATCH v3 0/5] usb: dwc2: Add support for USB OTG on STM32F4x9 Bruno Herrera 2017-01-17 16:12 ` [PATCH v3 1/5] usb: dwc2: Add support for STM32F429/439/469 USB OTG HS/FS in FS mode (internal PHY) Bruno Herrera 2017-01-17 16:12 ` Bruno Herrera 2017-01-19 23:12 ` John Youn 2017-01-19 23:12 ` John Youn 2017-01-17 16:12 ` [PATCH v3 2/5] ARM: dts: stm32: Add USB FS support for STM32F429 MCU Bruno Herrera 2017-01-17 16:12 ` Bruno Herrera 2017-01-17 16:12 ` [PATCH v3 3/5] ARM: dts: stm32: Enable USB FS on stm32f469-disco Bruno Herrera 2017-01-17 16:12 ` Bruno Herrera 2017-01-17 16:12 ` [PATCH v3 4/5] ARM: dts: stm32: Enable USB HS in FS mode (embedded phy) on stm32f429-disco Bruno Herrera 2017-01-17 16:12 ` Bruno Herrera [not found] ` <20170117161237.3802-1-bruherrera-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2017-01-17 16:12 ` [PATCH v3 5/5] dt-bindings: Document the STM32 USB OTG DWC2 core binding Bruno Herrera 2017-01-17 16:12 ` Bruno Herrera [not found] ` <20170117161237.3802-6-bruherrera-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2017-01-19 19:24 ` Rob Herring 2017-01-19 19:24 ` Rob Herring
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20170117161237.3802-1-bruherrera@gmail.com \ --to=bruherrera@gmail.com \ --cc=alexandre.torgue@st.com \ --cc=devicetree@vger.kernel.org \ --cc=felipe.balbi@linux.intel.com \ --cc=johnyoun@synopsys.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-usb@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.