* [Qemu-devel] [PATCH v7 01/27] docs: new design document multi-thread-tcg.txt
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
@ 2017-01-19 17:04 ` Alex Bennée
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 02/27] mttcg: translate-all: Enable locking debug in a debug build Alex Bennée
` (25 subsequent siblings)
26 siblings, 0 replies; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:04 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée
This documents the current design for upgrading TCG emulation to take
advantage of modern CPUs by running a thread-per-CPU. The document goes
through the various areas of the code affected by such a change and
proposes design requirements for each part of the solution.
The text marked with (Current solution[s]) to document what the current
approaches being used are.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
---
v1
- initial version
v2
- update discussion on locks
- bit more detail on vCPU scheduling
- explicitly mention Translation Blocks
- emulated hardware state already covered by iomutex
- a few minor rewords
v3
- mention this covers system-mode
- describe main main-loop and lookup hot-path
- mention multi-concurrent-reader lookups
- enumerate reasons for invalidation
- add more details on lookup structures
- describe the softmmu hot-path better
- mention store-after-load barrier problem
v4
- mention some cross-over between linux-user/system emulation
- various minor grammar and scanning fixes
- fix reference to tb_ctx.htbale
- describe the solution for hot-path
- more detail on TB flushing and invalidation
- add (Current solution) following design requirements
- more detail on iothread/BQL mutex
- mention implicit memory barriers
- add links to current LL/SC and cmpxchg patch sets
- add TLB flag setting as an additional requirement
v6
- remove DRAFTING, update copyright dates
- document current solutions to each design requirement
- tb_lock() serialisation for codegen/patch
- cputlb changes to defer cross-vCPU flushes
- cputlb atomic updates for slow-path
- BQL usage for hardware serialisation
- cmpxchg as initial atomic/synchronisation support mechanism
v7
- minor format fix
- include target-mips in list of MB aware front-ends
- mention BQL around IRQ raising
- update with notes on _all_cpus and the wait flag
---
docs/multi-thread-tcg.txt | 350 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 350 insertions(+)
create mode 100644 docs/multi-thread-tcg.txt
diff --git a/docs/multi-thread-tcg.txt b/docs/multi-thread-tcg.txt
new file mode 100644
index 0000000000..a99b4564c6
--- /dev/null
+++ b/docs/multi-thread-tcg.txt
@@ -0,0 +1,350 @@
+Copyright (c) 2015-2016 Linaro Ltd.
+
+This work is licensed under the terms of the GNU GPL, version 2 or
+later. See the COPYING file in the top-level directory.
+
+Introduction
+============
+
+This document outlines the design for multi-threaded TCG system-mode
+emulation. The current user-mode emulation mirrors the thread
+structure of the translated executable. Some of the work will be
+applicable to both system and linux-user emulation.
+
+The original system-mode TCG implementation was single threaded and
+dealt with multiple CPUs with simple round-robin scheduling. This
+simplified a lot of things but became increasingly limited as systems
+being emulated gained additional cores and per-core performance gains
+for host systems started to level off.
+
+vCPU Scheduling
+===============
+
+We introduce a new running mode where each vCPU will run on its own
+user-space thread. This will be enabled by default for all FE/BE
+combinations that have had the required work done to support this
+safely.
+
+In the general case of running translated code there should be no
+inter-vCPU dependencies and all vCPUs should be able to run at full
+speed. Synchronisation will only be required while accessing internal
+shared data structures or when the emulated architecture requires a
+coherent representation of the emulated machine state.
+
+Shared Data Structures
+======================
+
+Main Run Loop
+-------------
+
+Even when there is no code being generated there are a number of
+structures associated with the hot-path through the main run-loop.
+These are associated with looking up the next translation block to
+execute. These include:
+
+ tb_jmp_cache (per-vCPU, cache of recent jumps)
+ tb_ctx.htable (global hash table, phys address->tb lookup)
+
+As TB linking only occurs when blocks are in the same page this code
+is critical to performance as looking up the next TB to execute is the
+most common reason to exit the generated code.
+
+DESIGN REQUIREMENT: Make access to lookup structures safe with
+multiple reader/writer threads. Minimise any lock contention to do it.
+
+The hot-path avoids using locks where possible. The tb_jmp_cache is
+updated with atomic accesses to ensure consistent results. The fall
+back QHT based hash table is also designed for lockless lookups. Locks
+are only taken when code generation is required or TranslationBlocks
+have their block-to-block jumps patched.
+
+Global TCG State
+----------------
+
+We need to protect the entire code generation cycle including any post
+generation patching of the translated code. This also implies a shared
+translation buffer which contains code running on all cores. Any
+execution path that comes to the main run loop will need to hold a
+mutex for code generation. This also includes times when we need flush
+code or entries from any shared lookups/caches. Structures held on a
+per-vCPU basis won't need locking unless other vCPUs will need to
+modify them.
+
+DESIGN REQUIREMENT: Add locking around all code generation and TB
+patching.
+
+(Current solution)
+
+Mainly as part of the linux-user work all code generation is
+serialised with a tb_lock(). For the SoftMMU tb_lock() also takes the
+place of mmap_lock() in linux-user.
+
+Translation Blocks
+------------------
+
+Currently the whole system shares a single code generation buffer
+which when full will force a flush of all translations and start from
+scratch again. Some operations also force a full flush of translations
+including:
+
+ - debugging operations (breakpoint insertion/removal)
+ - some CPU helper functions
+
+This is done with the async_safe_run_on_cpu() mechanism to ensure all
+vCPUs are quiescent when changes are being made to shared global
+structures.
+
+More granular translation invalidation events are typically due
+to a change of the state of a physical page:
+
+ - code modification (self modify code, patching code)
+ - page changes (new page mapping in linux-user mode)
+
+While setting the invalid flag in a TranslationBlock will stop it
+being used when looked up in the hot-path there are a number of other
+book-keeping structures that need to be safely cleared.
+
+Any TranslationBlocks which have been patched to jump directly to the
+now invalid blocks need the jump patches reversing so they will return
+to the C code.
+
+There are a number of look-up caches that need to be properly updated
+including the:
+
+ - jump lookup cache
+ - the physical-to-tb lookup hash table
+ - the global page table
+
+The global page table (l1_map) which provides a multi-level look-up
+for PageDesc structures which contain pointers to the start of a
+linked list of all Translation Blocks in that page (see page_next).
+
+Both the jump patching and the page cache involve linked lists that
+the invalidated TranslationBlock needs to be removed from.
+
+DESIGN REQUIREMENT: Safely handle invalidation of TBs
+ - safely patch/revert direct jumps
+ - remove central PageDesc lookup entries
+ - ensure lookup caches/hashes are safely updated
+
+(Current solution)
+
+The direct jump themselves are updated atomically by the TCG
+tb_set_jmp_target() code. Modification to the linked lists that allow
+searching for linked pages are done under the protect of the
+tb_lock().
+
+The global page table is protected by the tb_lock() in system-mode and
+mmap_lock() in linux-user mode.
+
+The lookup caches are updated atomically and the lookup hash uses QHT
+which is designed for concurrent safe lookup.
+
+
+Memory maps and TLBs
+--------------------
+
+The memory handling code is fairly critical to the speed of memory
+access in the emulated system. The SoftMMU code is designed so the
+hot-path can be handled entirely within translated code. This is
+handled with a per-vCPU TLB structure which once populated will allow
+a series of accesses to the page to occur without exiting the
+translated code. It is possible to set flags in the TLB address which
+will ensure the slow-path is taken for each access. This can be done
+to support:
+
+ - Memory regions (dividing up access to PIO, MMIO and RAM)
+ - Dirty page tracking (for code gen, SMC detection, migration and display)
+ - Virtual TLB (for translating guest address->real address)
+
+When the TLB tables are updated by a vCPU thread other than their own
+we need to ensure it is done in a safe way so no inconsistent state is
+seen by the vCPU thread.
+
+Some operations require updating a number of vCPUs TLBs at the same
+time in a synchronised manner.
+
+DESIGN REQUIREMENTS:
+
+ - TLB Flush All/Page
+ - can be across-vCPUs
+ - cross vCPU TLB flush may need other vCPU brought to halt
+ - change may need to be visible to the calling vCPU immediately
+ - TLB Flag Update
+ - usually cross-vCPU
+ - want change to be visible as soon as possible
+ - TLB Update (update a CPUTLBEntry, via tlb_set_page_with_attrs)
+ - This is a per-vCPU table - by definition can't race
+ - updated by its own thread when the slow-path is forced
+
+(Current solution)
+
+We have updated cputlb.c to defer operations when a cross-vCPU
+operation with async_run_on_cpu() which ensures each vCPU sees a
+coherent state when it next runs its work (in a few instructions
+time).
+
+A new set up operations (tlb_flush_*_all_cpus) take an additional flag
+which when set will force synchronisation by setting the source vCPUs
+work as "safe work" and exiting the cpu run loop. This ensure by the
+time execution restarts all flush operations have completed.
+
+TLB flag updates are all done atomically and are also protected by the
+tb_lock() which is used by the functions that update the TLB in bulk.
+
+(Known limitation)
+
+Not really a limitation but the wait mechanism is overly strict for
+some architectures which only need flushes completed by a barrier
+instruction. This could be a future optimisation.
+
+Emulated hardware state
+-----------------------
+
+Currently thanks to KVM work any access to IO memory is automatically
+protected by the global iothread mutex, also known as the BQL (Big
+Qemu Lock). Any IO region that doesn't use global mutex is expected to
+do its own locking.
+
+However IO memory isn't the only way emulated hardware state can be
+modified. Some architectures have model specific registers that
+trigger hardware emulation features. Generally any translation helper
+that needs to update more than a single vCPUs of state should take the
+BQL.
+
+As the BQL, or global iothread mutex is shared across the system we
+push the use of the lock as far down into the TCG code as possible to
+minimise contention.
+
+(Current solution)
+
+MMIO access automatically serialises hardware emulation by way of the
+BQL. Currently ARM targets serialise all ARM_CP_IO register accesses
+and also defer the reset/startup of vCPUs to the vCPU context by way
+of async_run_on_cpu().
+
+Updates to interrupt state are also protected by the BQL as they can
+often be cross vCPU.
+
+Memory Consistency
+==================
+
+Between emulated guests and host systems there are a range of memory
+consistency models. Even emulating weakly ordered systems on strongly
+ordered hosts needs to ensure things like store-after-load re-ordering
+can be prevented when the guest wants to.
+
+Memory Barriers
+---------------
+
+Barriers (sometimes known as fences) provide a mechanism for software
+to enforce a particular ordering of memory operations from the point
+of view of external observers (e.g. another processor core). They can
+apply to any memory operations as well as just loads or stores.
+
+The Linux kernel has an excellent write-up on the various forms of
+memory barrier and the guarantees they can provide [1].
+
+Barriers are often wrapped around synchronisation primitives to
+provide explicit memory ordering semantics. However they can be used
+by themselves to provide safe lockless access by ensuring for example
+a change to a signal flag will only be visible once the changes to
+payload are.
+
+DESIGN REQUIREMENT: Add a new tcg_memory_barrier op
+
+This would enforce a strong load/store ordering so all loads/stores
+complete at the memory barrier. On single-core non-SMP strongly
+ordered backends this could become a NOP.
+
+Aside from explicit standalone memory barrier instructions there are
+also implicit memory ordering semantics which comes with each guest
+memory access instruction. For example all x86 load/stores come with
+fairly strong guarantees of sequential consistency where as ARM has
+special variants of load/store instructions that imply acquire/release
+semantics.
+
+In the case of a strongly ordered guest architecture being emulated on
+a weakly ordered host the scope for a heavy performance impact is
+quite high.
+
+DESIGN REQUIREMENTS: Be efficient with use of memory barriers
+ - host systems with stronger implied guarantees can skip some barriers
+ - merge consecutive barriers to the strongest one
+
+(Current solution)
+
+The system currently has a tcg_gen_mb() which will add memory barrier
+operations if code generation is being done in a parallel context. The
+tcg_optimize() function attempts to merge barriers up to their
+strongest form before any load/store operations. The solution was
+originally developed and tested for linux-user based systems. All
+backends have been converted to emit fences when required. So far the
+following front-ends have been updated to emit fences when required:
+
+ - target-i386
+ - target-arm
+ - target-aarch64
+ - target-alpha
+ - target-mips
+
+Memory Control and Maintenance
+------------------------------
+
+This includes a class of instructions for controlling system cache
+behaviour. While QEMU doesn't model cache behaviour these instructions
+are often seen when code modification has taken place to ensure the
+changes take effect.
+
+Synchronisation Primitives
+--------------------------
+
+There are two broad types of synchronisation primitives found in
+modern ISAs: atomic instructions and exclusive regions.
+
+The first type offer a simple atomic instruction which will guarantee
+some sort of test and conditional store will be truly atomic w.r.t.
+other cores sharing access to the memory. The classic example is the
+x86 cmpxchg instruction.
+
+The second type offer a pair of load/store instructions which offer a
+guarantee that an region of memory has not been touched between the
+load and store instructions. An example of this is ARM's ldrex/strex
+pair where the strex instruction will return a flag indicating a
+successful store only if no other CPU has accessed the memory region
+since the ldrex.
+
+Traditionally TCG has generated a series of operations that work
+because they are within the context of a single translation block so
+will have completed before another CPU is scheduled. However with
+the ability to have multiple threads running to emulate multiple CPUs
+we will need to explicitly expose these semantics.
+
+DESIGN REQUIREMENTS:
+ - Support classic atomic instructions
+ - Support load/store exclusive (or load link/store conditional) pairs
+ - Generic enough infrastructure to support all guest architectures
+CURRENT OPEN QUESTIONS:
+ - How problematic is the ABA problem in general?
+
+(Current solution)
+
+The TCG provides a number of atomic helpers (tcg_gen_atomic_*) which
+can be used directly or combined to emulate other instructions like
+ARM's ldrex/strex instructions. While they are susceptible to the ABA
+problem so far common guests have not implemented patterns where
+this may be a problem - typically presenting a locking ABI which
+assumes cmpxchg like semantics.
+
+The code also includes a fall-back for cases where multi-threaded TCG
+ops can't work (e.g. guest atomic width > host atomic width). In this
+case an EXCP_ATOMIC exit occurs and the instruction is emulated with
+an exclusive lock which ensures all emulation is serialised.
+
+While the atomic helpers look good enough for now there may be a need
+to look at solutions that can more closely model the guest
+architectures semantics.
+
+==========
+
+[1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/plain/Documentation/memory-barriers.txt
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* [Qemu-devel] [PATCH v7 02/27] mttcg: translate-all: Enable locking debug in a debug build
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 01/27] docs: new design document multi-thread-tcg.txt Alex Bennée
@ 2017-01-19 17:04 ` Alex Bennée
2017-01-23 18:57 ` Richard Henderson
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 03/27] mttcg: Add missing tb_lock/unlock() in cpu_exec_step() Alex Bennée
` (24 subsequent siblings)
26 siblings, 1 reply; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:04 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, Peter Crosthwaite
From: Pranith Kumar <bobby.prani@gmail.com>
Enable tcg lock debug asserts in a debug build by default instead of
relying on DEBUG_LOCKING. None of the other DEBUG_* macros have
asserts, so this patch removes DEBUG_LOCKING and enable these asserts
in a debug build.
CC: Richard Henderson <rth@twiddle.net>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
[AJB: tweak ifdefs so can be early in series]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
translate-all.c | 52 ++++++++++++++++------------------------------------
1 file changed, 16 insertions(+), 36 deletions(-)
diff --git a/translate-all.c b/translate-all.c
index 20262938bb..055436a676 100644
--- a/translate-all.c
+++ b/translate-all.c
@@ -59,7 +59,6 @@
/* #define DEBUG_TB_INVALIDATE */
/* #define DEBUG_TB_FLUSH */
-/* #define DEBUG_LOCKING */
/* make various TB consistency checks */
/* #define DEBUG_TB_CHECK */
@@ -74,20 +73,10 @@
* access to the memory related structures are protected with the
* mmap_lock.
*/
-#ifdef DEBUG_LOCKING
-#define DEBUG_MEM_LOCKS 1
-#else
-#define DEBUG_MEM_LOCKS 0
-#endif
-
#ifdef CONFIG_SOFTMMU
#define assert_memory_lock() do { /* nothing */ } while (0)
#else
-#define assert_memory_lock() do { \
- if (DEBUG_MEM_LOCKS) { \
- g_assert(have_mmap_lock()); \
- } \
- } while (0)
+#define assert_memory_lock() tcg_debug_assert(have_mmap_lock())
#endif
#define SMC_BITMAP_USE_THRESHOLD 10
@@ -169,10 +158,18 @@ static void page_table_config_init(void)
assert(v_l2_levels >= 0);
}
+#ifdef CONFIG_USER_ONLY
+#define assert_tb_locked() tcg_debug_assert(have_tb_lock)
+#define assert_tb_unlocked() tcg_debug_assert(!have_tb_lock)
+#else
+#define assert_tb_locked() do { /* nothing */ } while (0)
+#define assert_tb_unlocked() do { /* nothing */ } while (0)
+#endif
+
void tb_lock(void)
{
#ifdef CONFIG_USER_ONLY
- assert(!have_tb_lock);
+ assert_tb_unlocked();
qemu_mutex_lock(&tcg_ctx.tb_ctx.tb_lock);
have_tb_lock++;
#endif
@@ -181,7 +178,7 @@ void tb_lock(void)
void tb_unlock(void)
{
#ifdef CONFIG_USER_ONLY
- assert(have_tb_lock);
+ assert_tb_locked();
have_tb_lock--;
qemu_mutex_unlock(&tcg_ctx.tb_ctx.tb_lock);
#endif
@@ -197,23 +194,6 @@ void tb_lock_reset(void)
#endif
}
-#ifdef DEBUG_LOCKING
-#define DEBUG_TB_LOCKS 1
-#else
-#define DEBUG_TB_LOCKS 0
-#endif
-
-#ifdef CONFIG_SOFTMMU
-#define assert_tb_lock() do { /* nothing */ } while (0)
-#else
-#define assert_tb_lock() do { \
- if (DEBUG_TB_LOCKS) { \
- g_assert(have_tb_lock); \
- } \
- } while (0)
-#endif
-
-
static TranslationBlock *tb_find_pc(uintptr_t tc_ptr);
void cpu_gen_init(void)
@@ -847,7 +827,7 @@ static TranslationBlock *tb_alloc(target_ulong pc)
{
TranslationBlock *tb;
- assert_tb_lock();
+ assert_tb_locked();
if (tcg_ctx.tb_ctx.nb_tbs >= tcg_ctx.code_gen_max_blocks) {
return NULL;
@@ -862,7 +842,7 @@ static TranslationBlock *tb_alloc(target_ulong pc)
/* Called with tb_lock held. */
void tb_free(TranslationBlock *tb)
{
- assert_tb_lock();
+ assert_tb_locked();
/* In practice this is mostly used for single use temporary TB
Ignore the hard cases and just back up if this TB happens to
@@ -1104,7 +1084,7 @@ void tb_phys_invalidate(TranslationBlock *tb, tb_page_addr_t page_addr)
uint32_t h;
tb_page_addr_t phys_pc;
- assert_tb_lock();
+ assert_tb_locked();
atomic_set(&tb->invalid, true);
@@ -1419,7 +1399,7 @@ static void tb_invalidate_phys_range_1(tb_page_addr_t start, tb_page_addr_t end)
#ifdef CONFIG_SOFTMMU
void tb_invalidate_phys_range(tb_page_addr_t start, tb_page_addr_t end)
{
- assert_tb_lock();
+ assert_tb_locked();
tb_invalidate_phys_range_1(start, end);
}
#else
@@ -1462,7 +1442,7 @@ void tb_invalidate_phys_page_range(tb_page_addr_t start, tb_page_addr_t end,
#endif /* TARGET_HAS_PRECISE_SMC */
assert_memory_lock();
- assert_tb_lock();
+ assert_tb_locked();
p = page_find(start >> TARGET_PAGE_BITS);
if (!p) {
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* Re: [Qemu-devel] [PATCH v7 02/27] mttcg: translate-all: Enable locking debug in a debug build
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 02/27] mttcg: translate-all: Enable locking debug in a debug build Alex Bennée
@ 2017-01-23 18:57 ` Richard Henderson
0 siblings, 0 replies; 51+ messages in thread
From: Richard Henderson @ 2017-01-23 18:57 UTC (permalink / raw)
To: Alex Bennée, mttcg, qemu-devel, fred.konrad, a.rigo, cota,
bobby.prani, nikunj
Cc: peter.maydell, claudio.fontana, Peter Crosthwaite, jan.kiszka,
mark.burton, serge.fdrv, pbonzini, bamvor.zhangjian
On 01/19/2017 09:04 AM, Alex Bennée wrote:
> From: Pranith Kumar <bobby.prani@gmail.com>
>
> Enable tcg lock debug asserts in a debug build by default instead of
> relying on DEBUG_LOCKING. None of the other DEBUG_* macros have
> asserts, so this patch removes DEBUG_LOCKING and enable these asserts
> in a debug build.
>
> CC: Richard Henderson <rth@twiddle.net>
> Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
> [AJB: tweak ifdefs so can be early in series]
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> translate-all.c | 52 ++++++++++++++++------------------------------------
> 1 file changed, 16 insertions(+), 36 deletions(-)
Reviewed-by: Richard Henderson <rth@twiddle.net>
r~
^ permalink raw reply [flat|nested] 51+ messages in thread
* [Qemu-devel] [PATCH v7 03/27] mttcg: Add missing tb_lock/unlock() in cpu_exec_step()
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 01/27] docs: new design document multi-thread-tcg.txt Alex Bennée
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 02/27] mttcg: translate-all: Enable locking debug in a debug build Alex Bennée
@ 2017-01-19 17:04 ` Alex Bennée
2017-01-23 18:57 ` Richard Henderson
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 04/27] tcg: move TCG_MO/BAR types into own file Alex Bennée
` (23 subsequent siblings)
26 siblings, 1 reply; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:04 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, Peter Crosthwaite
From: Pranith Kumar <bobby.prani@gmail.com>
The recent patch enabling lock assertions uncovered the missing lock
acquisition in cpu_exec_step(). This patch adds them.
CC: Richard Henderson <rth@twiddle.net>
CC: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
---
cpu-exec.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/cpu-exec.c b/cpu-exec.c
index 4188fed3c6..1b8685dc21 100644
--- a/cpu-exec.c
+++ b/cpu-exec.c
@@ -233,14 +233,18 @@ static void cpu_exec_step(CPUState *cpu)
uint32_t flags;
cpu_get_tb_cpu_state(env, &pc, &cs_base, &flags);
+ tb_lock();
tb = tb_gen_code(cpu, pc, cs_base, flags,
1 | CF_NOCACHE | CF_IGNORE_ICOUNT);
tb->orig_tb = NULL;
+ tb_unlock();
/* execute the generated code */
trace_exec_tb_nocache(tb, pc);
cpu_tb_exec(cpu, tb);
+ tb_lock();
tb_phys_invalidate(tb, -1);
tb_free(tb);
+ tb_unlock();
}
void cpu_exec_step_atomic(CPUState *cpu)
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* Re: [Qemu-devel] [PATCH v7 03/27] mttcg: Add missing tb_lock/unlock() in cpu_exec_step()
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 03/27] mttcg: Add missing tb_lock/unlock() in cpu_exec_step() Alex Bennée
@ 2017-01-23 18:57 ` Richard Henderson
0 siblings, 0 replies; 51+ messages in thread
From: Richard Henderson @ 2017-01-23 18:57 UTC (permalink / raw)
To: Alex Bennée, mttcg, qemu-devel, fred.konrad, a.rigo, cota,
bobby.prani, nikunj
Cc: peter.maydell, claudio.fontana, Peter Crosthwaite, jan.kiszka,
mark.burton, serge.fdrv, pbonzini, bamvor.zhangjian
On 01/19/2017 09:04 AM, Alex Bennée wrote:
> From: Pranith Kumar <bobby.prani@gmail.com>
>
> The recent patch enabling lock assertions uncovered the missing lock
> acquisition in cpu_exec_step(). This patch adds them.
>
> CC: Richard Henderson <rth@twiddle.net>
> CC: Alex Bennée <alex.bennee@linaro.org>
> Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
> ---
> cpu-exec.c | 4 ++++
> 1 file changed, 4 insertions(+)
Reviewed-by: Richard Henderson <rth@twiddle.net>
r~
^ permalink raw reply [flat|nested] 51+ messages in thread
* [Qemu-devel] [PATCH v7 04/27] tcg: move TCG_MO/BAR types into own file
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (2 preceding siblings ...)
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 03/27] mttcg: Add missing tb_lock/unlock() in cpu_exec_step() Alex Bennée
@ 2017-01-19 17:04 ` Alex Bennée
2017-01-23 18:59 ` Richard Henderson
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 05/27] tcg: add options for enabling MTTCG Alex Bennée
` (22 subsequent siblings)
26 siblings, 1 reply; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:04 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée
We'll be using the memory ordering definitions to define values for
both the host and guest. To avoid fighting with circular header
dependencies just move these types into their own minimal header.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
tcg/tcg-mo.h | 45 +++++++++++++++++++++++++++++++++++++++++++++
tcg/tcg.h | 18 +-----------------
2 files changed, 46 insertions(+), 17 deletions(-)
create mode 100644 tcg/tcg-mo.h
diff --git a/tcg/tcg-mo.h b/tcg/tcg-mo.h
new file mode 100644
index 0000000000..429b022561
--- /dev/null
+++ b/tcg/tcg-mo.h
@@ -0,0 +1,45 @@
+/*
+ * Tiny Code Generator for QEMU
+ *
+ * Copyright (c) 2008 Fabrice Bellard
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef TCG_MO_H
+#define TCG_MO_H
+
+typedef enum {
+ /* Used to indicate the type of accesses on which ordering
+ is to be ensured. Modeled after SPARC barriers. */
+ TCG_MO_LD_LD = 0x01,
+ TCG_MO_ST_LD = 0x02,
+ TCG_MO_LD_ST = 0x04,
+ TCG_MO_ST_ST = 0x08,
+ TCG_MO_ALL = 0x0F, /* OR of the above */
+
+ /* Used to indicate the kind of ordering which is to be ensured by the
+ instruction. These types are derived from x86/aarch64 instructions.
+ It should be noted that these are different from C11 semantics. */
+ TCG_BAR_LDAQ = 0x10, /* Following ops will not come forward */
+ TCG_BAR_STRL = 0x20, /* Previous ops will not be delayed */
+ TCG_BAR_SC = 0x30, /* No ops cross barrier; OR of the above */
+} TCGBar;
+
+#endif /* TCG_MO_H */
diff --git a/tcg/tcg.h b/tcg/tcg.h
index 631c6f69b1..f946452049 100644
--- a/tcg/tcg.h
+++ b/tcg/tcg.h
@@ -29,6 +29,7 @@
#include "cpu.h"
#include "exec/tb-context.h"
#include "qemu/bitops.h"
+#include "tcg-mo.h"
#include "tcg-target.h"
/* XXX: make safe guess about sizes */
@@ -498,23 +499,6 @@ static inline intptr_t QEMU_ARTIFICIAL GET_TCGV_PTR(TCGv_ptr t)
#define TCG_CALL_DUMMY_TCGV MAKE_TCGV_I32(-1)
#define TCG_CALL_DUMMY_ARG ((TCGArg)(-1))
-typedef enum {
- /* Used to indicate the type of accesses on which ordering
- is to be ensured. Modeled after SPARC barriers. */
- TCG_MO_LD_LD = 0x01,
- TCG_MO_ST_LD = 0x02,
- TCG_MO_LD_ST = 0x04,
- TCG_MO_ST_ST = 0x08,
- TCG_MO_ALL = 0x0F, /* OR of the above */
-
- /* Used to indicate the kind of ordering which is to be ensured by the
- instruction. These types are derived from x86/aarch64 instructions.
- It should be noted that these are different from C11 semantics. */
- TCG_BAR_LDAQ = 0x10, /* Following ops will not come forward */
- TCG_BAR_STRL = 0x20, /* Previous ops will not be delayed */
- TCG_BAR_SC = 0x30, /* No ops cross barrier; OR of the above */
-} TCGBar;
-
/* Conditions. Note that these are laid out for easy manipulation by
the functions below:
bit 0 is used for inverting;
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* Re: [Qemu-devel] [PATCH v7 04/27] tcg: move TCG_MO/BAR types into own file
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 04/27] tcg: move TCG_MO/BAR types into own file Alex Bennée
@ 2017-01-23 18:59 ` Richard Henderson
0 siblings, 0 replies; 51+ messages in thread
From: Richard Henderson @ 2017-01-23 18:59 UTC (permalink / raw)
To: Alex Bennée, mttcg, qemu-devel, fred.konrad, a.rigo, cota,
bobby.prani, nikunj
Cc: peter.maydell, claudio.fontana, jan.kiszka, mark.burton,
serge.fdrv, pbonzini, bamvor.zhangjian
On 01/19/2017 09:04 AM, Alex Bennée wrote:
> We'll be using the memory ordering definitions to define values for
> both the host and guest. To avoid fighting with circular header
> dependencies just move these types into their own minimal header.
>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> tcg/tcg-mo.h | 45 +++++++++++++++++++++++++++++++++++++++++++++
> tcg/tcg.h | 18 +-----------------
> 2 files changed, 46 insertions(+), 17 deletions(-)
> create mode 100644 tcg/tcg-mo.h
Reviewed-by: Richard Henderson <rth@twiddle.net>
r~
^ permalink raw reply [flat|nested] 51+ messages in thread
* [Qemu-devel] [PATCH v7 05/27] tcg: add options for enabling MTTCG
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (3 preceding siblings ...)
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 04/27] tcg: move TCG_MO/BAR types into own file Alex Bennée
@ 2017-01-19 17:04 ` Alex Bennée
2017-01-20 1:28 ` Pranith Kumar
2017-01-23 19:06 ` Richard Henderson
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 06/27] tcg: add kick timer for single-threaded vCPU emulation Alex Bennée
` (21 subsequent siblings)
26 siblings, 2 replies; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:04 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, Peter Crosthwaite
From: KONRAD Frederic <fred.konrad@greensocs.com>
We know there will be cases where MTTCG won't work until additional work
is done in the front/back ends to support. It will however be useful to
be able to turn it on.
As a result MTTCG will default to off unless the combination is
supported. However the user can turn it on for the sake of testing.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[AJB: move to -accel tcg,thread=multi|single, defaults]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
---
v1:
- merge with add mttcg option.
- update commit message
v2:
- machine_init->opts_init
v3:
- moved from -tcg to -accel tcg,thread=single|multi
- fix checkpatch warnings
v4:
- make mttcg_enabled extern, qemu_tcg_mttcg_enabled() now just macro
- qemu_tcg_configure now propagates Error instead of exiting
- better error checking of thread=foo
- use CONFIG flags for default_mttcg_enabled()
- disable mttcg with icount, error if both forced on
v7
- explicitly disable MTTCG for TCG_OVERSIZED_GUEST
- use check_tcg_memory_orders_compatible() instead of CONFIG_MTTCG_HOST
- change CONFIG_MTTCG_TARGET to TARGET_SUPPORTS_MTTCG
---
cpus.c | 70 +++++++++++++++++++++++++++++++++++++++++++++++++++
include/qom/cpu.h | 9 +++++++
include/sysemu/cpus.h | 2 ++
qemu-options.hx | 20 +++++++++++++++
tcg/tcg.h | 9 +++++++
vl.c | 49 +++++++++++++++++++++++++++++++++++-
6 files changed, 158 insertions(+), 1 deletion(-)
diff --git a/cpus.c b/cpus.c
index 5213351c6d..eaefaebffc 100644
--- a/cpus.c
+++ b/cpus.c
@@ -25,6 +25,7 @@
/* Needed early for CONFIG_BSD etc. */
#include "qemu/osdep.h"
#include "qemu-common.h"
+#include "qemu/config-file.h"
#include "cpu.h"
#include "monitor/monitor.h"
#include "qapi/qmp/qerror.h"
@@ -148,6 +149,75 @@ typedef struct TimersState {
} TimersState;
static TimersState timers_state;
+bool mttcg_enabled;
+
+/*
+ * We default to false if we know other options have been enabled
+ * which are currently incompatible with MTTCG. Otherwise when each
+ * guest (target) has been updated to support:
+ * - atomic instructions
+ * - memory ordering primitives (barriers)
+ * they can set the appropriate CONFIG flags in ${target}-softmmu.mak
+ *
+ * Once a guest architecture has been converted to the new primitives
+ * there are two remaining limitations to check.
+ *
+ * - The guest can't be oversized (e.g. 64 bit guest on 32 bit host)
+ * - The host must have a stronger memory order than the guest
+ *
+ * It may be possible in future to support strong guests on weak hosts
+ * but that will require tagging all load/stores in a guest with their
+ * implicit memory order requirements which would likely slow things
+ * down a lot.
+ */
+
+static bool check_tcg_memory_orders_compatible(void)
+{
+#if defined(TCG_DEFAULT_MO) && defined(TCG_TARGET_DEFAULT_MO)
+ return (TCG_DEFAULT_MO & ~TCG_TARGET_DEFAULT_MO) == 0;
+#else
+ return false;
+#endif
+}
+
+static bool default_mttcg_enabled(void)
+{
+ QemuOpts *icount_opts = qemu_find_opts_singleton("icount");
+ const char *rr = qemu_opt_get(icount_opts, "rr");
+
+ if (rr || TCG_OVERSIZED_GUEST) {
+ return false;
+ } else {
+#ifdef TARGET_SUPPORTS_MTTCG
+ return check_tcg_memory_orders_compatible();
+#else
+ return false;
+#endif
+ }
+}
+
+void qemu_tcg_configure(QemuOpts *opts, Error **errp)
+{
+ const char *t = qemu_opt_get(opts, "thread");
+ if (t) {
+ if (strcmp(t, "multi") == 0) {
+ if (TCG_OVERSIZED_GUEST) {
+ error_setg(errp, "No MTTCG when guest word size > hosts");
+ } else if (!check_tcg_memory_orders_compatible()) {
+ error_setg(errp,
+ "No MTTCG when guest MO is stronger than host MO");
+ } else {
+ mttcg_enabled = true;
+ }
+ } else if (strcmp(t, "single") == 0) {
+ mttcg_enabled = false;
+ } else {
+ error_setg(errp, "Invalid 'thread' setting %s", t);
+ }
+ } else {
+ mttcg_enabled = default_mttcg_enabled();
+ }
+}
int64_t cpu_get_icount_raw(void)
{
diff --git a/include/qom/cpu.h b/include/qom/cpu.h
index 3f79a8e955..541785aeda 100644
--- a/include/qom/cpu.h
+++ b/include/qom/cpu.h
@@ -407,6 +407,15 @@ extern struct CPUTailQ cpus;
extern __thread CPUState *current_cpu;
/**
+ * qemu_tcg_mttcg_enabled:
+ * Check whether we are running MultiThread TCG or not.
+ *
+ * Returns: %true if we are in MTTCG mode %false otherwise.
+ */
+extern bool mttcg_enabled;
+#define qemu_tcg_mttcg_enabled() (mttcg_enabled)
+
+/**
* cpu_paging_enabled:
* @cpu: The CPU whose state is to be inspected.
*
diff --git a/include/sysemu/cpus.h b/include/sysemu/cpus.h
index 3728a1ea7e..a73b5d4bce 100644
--- a/include/sysemu/cpus.h
+++ b/include/sysemu/cpus.h
@@ -36,4 +36,6 @@ extern int smp_threads;
void list_cpus(FILE *f, fprintf_function cpu_fprintf, const char *optarg);
+void qemu_tcg_configure(QemuOpts *opts, Error **errp);
+
#endif
diff --git a/qemu-options.hx b/qemu-options.hx
index c534a2f7f9..e61c26a9d2 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -96,6 +96,26 @@ STEXI
Select CPU model (@code{-cpu help} for list and additional feature selection)
ETEXI
+DEF("accel", HAS_ARG, QEMU_OPTION_accel,
+ "-accel [accel=]accelerator[,thread=single|multi]\n"
+ " select accelerator ('-accel help for list')\n"
+ " thread=single|multi (enable multi-threaded TCG)", QEMU_ARCH_ALL)
+STEXI
+@item -accel @var{name}[,prop=@var{value}[,...]]
+@findex -accel
+This is used to enable an accelerator. Depending on the target architecture,
+kvm, xen, or tcg can be available. By default, tcg is used. If there is more
+than one accelerator specified, the next one is used if the previous one fails
+to initialize.
+@table @option
+@item thread=single|multi
+Controls number of TCG threads. When the TCG is multi-threaded there will be one
+thread per vCPU therefor taking advantage of additional host cores. The default
+is to enable multi-threading where both the back-end and front-ends support it and
+no incompatible TCG features have been enabled (e.g. icount/replay).
+@end table
+ETEXI
+
DEF("smp", HAS_ARG, QEMU_OPTION_smp,
"-smp [cpus=]n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]\n"
" set the number of CPUs to 'n' [default=1]\n"
diff --git a/tcg/tcg.h b/tcg/tcg.h
index f946452049..4c7f258220 100644
--- a/tcg/tcg.h
+++ b/tcg/tcg.h
@@ -80,6 +80,15 @@ typedef uint64_t tcg_target_ulong;
#error unsupported
#endif
+/* Oversized TCG guests make things like MTTCG hard
+ * as we can't use atomics for cputlb updates.
+ */
+#if TARGET_LONG_BITS > TCG_TARGET_REG_BITS
+#define TCG_OVERSIZED_GUEST 1
+#else
+#define TCG_OVERSIZED_GUEST 0
+#endif
+
#if TCG_TARGET_NB_REGS <= 32
typedef uint32_t TCGRegSet;
#elif TCG_TARGET_NB_REGS <= 64
diff --git a/vl.c b/vl.c
index c643d3ff3a..d6a9e119a7 100644
--- a/vl.c
+++ b/vl.c
@@ -296,6 +296,26 @@ static QemuOptsList qemu_machine_opts = {
},
};
+static QemuOptsList qemu_accel_opts = {
+ .name = "accel",
+ .implied_opt_name = "accel",
+ .head = QTAILQ_HEAD_INITIALIZER(qemu_accel_opts.head),
+ .merge_lists = true,
+ .desc = {
+ {
+ .name = "accel",
+ .type = QEMU_OPT_STRING,
+ .help = "Select the type of accelerator",
+ },
+ {
+ .name = "thread",
+ .type = QEMU_OPT_STRING,
+ .help = "Enable/disable multi-threaded TCG",
+ },
+ { /* end of list */ }
+ },
+};
+
static QemuOptsList qemu_boot_opts = {
.name = "boot-opts",
.implied_opt_name = "order",
@@ -3000,7 +3020,8 @@ int main(int argc, char **argv, char **envp)
const char *boot_once = NULL;
DisplayState *ds;
int cyls, heads, secs, translation;
- QemuOpts *hda_opts = NULL, *opts, *machine_opts, *icount_opts = NULL;
+ QemuOpts *opts, *machine_opts;
+ QemuOpts *hda_opts = NULL, *icount_opts = NULL, *accel_opts = NULL;
QemuOptsList *olist;
int optind;
const char *optarg;
@@ -3055,6 +3076,7 @@ int main(int argc, char **argv, char **envp)
qemu_add_opts(&qemu_trace_opts);
qemu_add_opts(&qemu_option_rom_opts);
qemu_add_opts(&qemu_machine_opts);
+ qemu_add_opts(&qemu_accel_opts);
qemu_add_opts(&qemu_mem_opts);
qemu_add_opts(&qemu_smp_opts);
qemu_add_opts(&qemu_boot_opts);
@@ -3748,6 +3770,26 @@ int main(int argc, char **argv, char **envp)
qdev_prop_register_global(&kvm_pit_lost_tick_policy);
break;
}
+ case QEMU_OPTION_accel:
+ accel_opts = qemu_opts_parse_noisily(qemu_find_opts("accel"),
+ optarg, true);
+ optarg = qemu_opt_get(accel_opts, "accel");
+
+ olist = qemu_find_opts("machine");
+ if (strcmp("kvm", optarg) == 0) {
+ qemu_opts_parse_noisily(olist, "accel=kvm", false);
+ } else if (strcmp("xen", optarg) == 0) {
+ qemu_opts_parse_noisily(olist, "accel=xen", false);
+ } else if (strcmp("tcg", optarg) == 0) {
+ qemu_opts_parse_noisily(olist, "accel=tcg", false);
+ } else {
+ if (!is_help_option(optarg)) {
+ error_printf("Unknown accelerator: %s", optarg);
+ }
+ error_printf("Supported accelerators: kvm, xen, tcg\n");
+ exit(1);
+ }
+ break;
case QEMU_OPTION_usb:
olist = qemu_find_opts("machine");
qemu_opts_parse_noisily(olist, "usb=on", false);
@@ -4053,6 +4095,8 @@ int main(int argc, char **argv, char **envp)
replay_configure(icount_opts);
+ qemu_tcg_configure(accel_opts, &error_fatal);
+
machine_class = select_machine();
set_memory_options(&ram_slots, &maxram_size, machine_class);
@@ -4417,6 +4461,9 @@ int main(int argc, char **argv, char **envp)
if (kvm_enabled() || xen_enabled()) {
error_report("-icount is not allowed with kvm or xen");
exit(1);
+ } else if (qemu_tcg_mttcg_enabled()) {
+ error_report("-icount does not currently work with MTTCG");
+ exit(1);
}
configure_icount(icount_opts, &error_abort);
qemu_opts_del(icount_opts);
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* Re: [Qemu-devel] [PATCH v7 05/27] tcg: add options for enabling MTTCG
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 05/27] tcg: add options for enabling MTTCG Alex Bennée
@ 2017-01-20 1:28 ` Pranith Kumar
2017-01-20 14:50 ` Alex Bennée
2017-01-23 19:06 ` Richard Henderson
1 sibling, 1 reply; 51+ messages in thread
From: Pranith Kumar @ 2017-01-20 1:28 UTC (permalink / raw)
To: Alex Bennée
Cc: mttcg, qemu-devel, fred.konrad, a.rigo, cota, nikunj,
mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Peter Crosthwaite
Alex Bennée writes:
> From: KONRAD Frederic <fred.konrad@greensocs.com>
>
> We know there will be cases where MTTCG won't work until additional work
> is done in the front/back ends to support. It will however be useful to
> be able to turn it on.
>
> As a result MTTCG will default to off unless the combination is
> supported. However the user can turn it on for the sake of testing.
>
<snip>
> static TimersState timers_state;
> +bool mttcg_enabled;
> +
> +/*
> + * We default to false if we know other options have been enabled
> + * which are currently incompatible with MTTCG. Otherwise when each
> + * guest (target) has been updated to support:
> + * - atomic instructions
> + * - memory ordering primitives (barriers)
> + * they can set the appropriate CONFIG flags in ${target}-softmmu.mak
> + *
> + * Once a guest architecture has been converted to the new primitives
> + * there are two remaining limitations to check.
> + *
> + * - The guest can't be oversized (e.g. 64 bit guest on 32 bit host)
> + * - The host must have a stronger memory order than the guest
> + *
> + * It may be possible in future to support strong guests on weak hosts
> + * but that will require tagging all load/stores in a guest with their
> + * implicit memory order requirements which would likely slow things
> + * down a lot.
> + */
> +
> +static bool check_tcg_memory_orders_compatible(void)
> +{
> +#if defined(TCG_DEFAULT_MO) && defined(TCG_TARGET_DEFAULT_MO)
> + return (TCG_DEFAULT_MO & ~TCG_TARGET_DEFAULT_MO) == 0;
I am not sure this is what we intended. If the guest is weaker than the host,
we can still run the guest if we translate the guest barriers. With the above,
a strong host cannot run a weaker host.
I think what we want is to disallow weak hosts from running stronger guests,
since we do not enforce the implicit ordering semantics of the guest as of
now. In that case you can filter them out using the following:
TCG_DEFAULT_MO | (TCG_DEFAULT_MO ^ ~TCG_TARGET_DEFAULT_MO) == TCG_MO_ALL
We want our guest execution to prevent all possible re-ordering. The first
term above is the host memory order. If the host is SC, we do not need to
check anything else. If not, the second term tells us the difference in
ordering between the guest and the host. It gives the kind of barriers
which will be translated from guest to host. Both these together should cover
all the cases for the memory order to be compatible.
Thoughts?
Thanks,
--
Pranith
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: [Qemu-devel] [PATCH v7 05/27] tcg: add options for enabling MTTCG
2017-01-20 1:28 ` Pranith Kumar
@ 2017-01-20 14:50 ` Alex Bennée
2017-01-20 15:03 ` Pranith Kumar
0 siblings, 1 reply; 51+ messages in thread
From: Alex Bennée @ 2017-01-20 14:50 UTC (permalink / raw)
To: Pranith Kumar
Cc: mttcg, qemu-devel, fred.konrad, a.rigo, cota, nikunj,
mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Peter Crosthwaite
Pranith Kumar <bobby.prani@gmail.com> writes:
> Alex Bennée writes:
>
>> From: KONRAD Frederic <fred.konrad@greensocs.com>
>>
>> We know there will be cases where MTTCG won't work until additional work
>> is done in the front/back ends to support. It will however be useful to
>> be able to turn it on.
>>
>> As a result MTTCG will default to off unless the combination is
>> supported. However the user can turn it on for the sake of testing.
>>
>
> <snip>
>
>> static TimersState timers_state;
>> +bool mttcg_enabled;
>> +
>> +/*
>> + * We default to false if we know other options have been enabled
>> + * which are currently incompatible with MTTCG. Otherwise when each
>> + * guest (target) has been updated to support:
>> + * - atomic instructions
>> + * - memory ordering primitives (barriers)
>> + * they can set the appropriate CONFIG flags in ${target}-softmmu.mak
>> + *
>> + * Once a guest architecture has been converted to the new primitives
>> + * there are two remaining limitations to check.
>> + *
>> + * - The guest can't be oversized (e.g. 64 bit guest on 32 bit host)
>> + * - The host must have a stronger memory order than the guest
>> + *
>> + * It may be possible in future to support strong guests on weak hosts
>> + * but that will require tagging all load/stores in a guest with their
>> + * implicit memory order requirements which would likely slow things
>> + * down a lot.
>> + */
>> +
>> +static bool check_tcg_memory_orders_compatible(void)
>> +{
>> +#if defined(TCG_DEFAULT_MO) && defined(TCG_TARGET_DEFAULT_MO)
>> + return (TCG_DEFAULT_MO & ~TCG_TARGET_DEFAULT_MO) == 0;
>
> I am not sure this is what we intended. If the guest is weaker than the host,
> we can still run the guest if we translate the guest barriers. With the above,
> a strong host cannot run a weaker host.
I think this is confusing because of QEMU's overload of the term target.
TCG_TARGET_DEFAULT_MO is the memory order of the host. So if there is
any expected memory order on the guest side (TCG_DEFAULT_MO) that isn't
met by the host then we fail. In ARMs case TCG_DEFAULT_MO is 0 so it
will always pass.
> I think what we want is to disallow weak hosts from running stronger guests,
> since we do not enforce the implicit ordering semantics of the guest as of
> now. In that case you can filter them out using the following:
>
> TCG_DEFAULT_MO | (TCG_DEFAULT_MO ^ ~TCG_TARGET_DEFAULT_MO) == TCG_MO_ALL
>
> We want our guest execution to prevent all possible re-ordering. The first
> term above is the host memory order. If the host is SC, we do not need to
> check anything else. If not, the second term tells us the difference in
> ordering between the guest and the host. It gives the kind of barriers
> which will be translated from guest to host. Both these together should cover
> all the cases for the memory order to be compatible.
>
> Thoughts?
That's the wrong way round. TCG_DEFAULT_MO is the guest memory order.
Maybe I should rename them to be explicitly:
TCG_GUEST_DEFAULT_MO
TCG_HOST_DEFAULT_MO
But that introduces another terminology into the TCG code.
>
> Thanks,
--
Alex Bennée
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: [Qemu-devel] [PATCH v7 05/27] tcg: add options for enabling MTTCG
2017-01-20 14:50 ` Alex Bennée
@ 2017-01-20 15:03 ` Pranith Kumar
0 siblings, 0 replies; 51+ messages in thread
From: Pranith Kumar @ 2017-01-20 15:03 UTC (permalink / raw)
To: Alex Bennée
Cc: MTTCG Devel, qemu-devel, KONRAD Frédéric, alvise rigo,
Emilio G. Cota, nikunj, Mark Burton, Paolo Bonzini, Jan Kiszka,
Sergey Fedorov, Richard Henderson, Peter Maydell,
Claudio Fontana, Bamvor Zhang Jian, Peter Crosthwaite
On Fri, Jan 20, 2017 at 9:50 AM, Alex Bennée <alex.bennee@linaro.org> wrote:
>
> That's the wrong way round. TCG_DEFAULT_MO is the guest memory order.
> Maybe I should rename them to be explicitly:
>
> TCG_GUEST_DEFAULT_MO
> TCG_HOST_DEFAULT_MO
>
> But that introduces another terminology into the TCG code.
>
Ah, that's not the first time I got confused. May be just add a comment?
--
Pranith
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [Qemu-devel] [PATCH v7 05/27] tcg: add options for enabling MTTCG
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 05/27] tcg: add options for enabling MTTCG Alex Bennée
2017-01-20 1:28 ` Pranith Kumar
@ 2017-01-23 19:06 ` Richard Henderson
2017-01-24 20:25 ` Alex Bennée
1 sibling, 1 reply; 51+ messages in thread
From: Richard Henderson @ 2017-01-23 19:06 UTC (permalink / raw)
To: Alex Bennée, mttcg, qemu-devel, fred.konrad, a.rigo, cota,
bobby.prani, nikunj
Cc: peter.maydell, claudio.fontana, Peter Crosthwaite, jan.kiszka,
mark.burton, serge.fdrv, pbonzini, bamvor.zhangjian
On 01/19/2017 09:04 AM, Alex Bennée wrote:
> +void qemu_tcg_configure(QemuOpts *opts, Error **errp)
> +{
> + const char *t = qemu_opt_get(opts, "thread");
> + if (t) {
> + if (strcmp(t, "multi") == 0) {
> + if (TCG_OVERSIZED_GUEST) {
> + error_setg(errp, "No MTTCG when guest word size > hosts");
I agree with this, since I don't ever imagine it'll be fixed. It's a silly use
case in the first place considering the ubiquity of 64-bit hosts.
> + } else if (!check_tcg_memory_orders_compatible()) {
> + error_setg(errp,
> + "No MTTCG when guest MO is stronger than host MO");
This, on the other hand, means that one cannot even force multi for testing. A
warning perhaps? And how shall we handle a guest translate adding barriers as
necessary to satisfy host memory ordering?
r~
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: [Qemu-devel] [PATCH v7 05/27] tcg: add options for enabling MTTCG
2017-01-23 19:06 ` Richard Henderson
@ 2017-01-24 20:25 ` Alex Bennée
2017-01-24 20:48 ` Richard Henderson
0 siblings, 1 reply; 51+ messages in thread
From: Alex Bennée @ 2017-01-24 20:25 UTC (permalink / raw)
To: Richard Henderson
Cc: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani,
nikunj, peter.maydell, claudio.fontana, Peter Crosthwaite,
jan.kiszka, mark.burton, serge.fdrv, pbonzini, bamvor.zhangjian
Richard Henderson <rth@twiddle.net> writes:
> On 01/19/2017 09:04 AM, Alex Bennée wrote:
>> +void qemu_tcg_configure(QemuOpts *opts, Error **errp)
>> +{
>> + const char *t = qemu_opt_get(opts, "thread");
>> + if (t) {
>> + if (strcmp(t, "multi") == 0) {
>> + if (TCG_OVERSIZED_GUEST) {
>> + error_setg(errp, "No MTTCG when guest word size > hosts");
>
> I agree with this, since I don't ever imagine it'll be fixed. It's a silly use
> case in the first place considering the ubiquity of 64-bit hosts.
Funnily enough I know one kernel hacker who does use this to test their
arm64 kernels on their re-purposed armhf chromebooks. I've already
explained coming their way ;-)
>
>> + } else if (!check_tcg_memory_orders_compatible()) {
>> + error_setg(errp,
>> + "No MTTCG when guest MO is stronger than host MO");
>
> This, on the other hand, means that one cannot even force multi for testing. A
> warning perhaps?
I did toy with making that a warning when I first wrote it. I'll make it so.
> And how shall we handle a guest translate adding barriers as
> necessary to satisfy host memory ordering?
We are talking about doing the necessary annotation to all a givens
targets loads and stores? I figured this code would morph and be tweaked
when (if?) we get there.
--
Alex Bennée
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: [Qemu-devel] [PATCH v7 05/27] tcg: add options for enabling MTTCG
2017-01-24 20:25 ` Alex Bennée
@ 2017-01-24 20:48 ` Richard Henderson
0 siblings, 0 replies; 51+ messages in thread
From: Richard Henderson @ 2017-01-24 20:48 UTC (permalink / raw)
To: Alex Bennée
Cc: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani,
nikunj, peter.maydell, claudio.fontana, Peter Crosthwaite,
jan.kiszka, mark.burton, serge.fdrv, pbonzini, bamvor.zhangjian
On 01/24/2017 12:25 PM, Alex Bennée wrote:
> We are talking about doing the necessary annotation to all a givens
> targets loads and stores? I figured this code would morph and be tweaked
> when (if?) we get there.
Fair enough.
r~
^ permalink raw reply [flat|nested] 51+ messages in thread
* [Qemu-devel] [PATCH v7 06/27] tcg: add kick timer for single-threaded vCPU emulation
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (4 preceding siblings ...)
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 05/27] tcg: add options for enabling MTTCG Alex Bennée
@ 2017-01-19 17:04 ` Alex Bennée
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 07/27] tcg: rename tcg_current_cpu to tcg_current_rr_cpu Alex Bennée
` (20 subsequent siblings)
26 siblings, 0 replies; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:04 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, Peter Crosthwaite
Currently we rely on the side effect of the main loop grabbing the
iothread_mutex to give any long running basic block chains a kick to
ensure the next vCPU is scheduled. As this code is being re-factored and
rationalised we now do it explicitly here.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
---
v2
- re-base fixes
- get_ticks_per_sec() -> NANOSECONDS_PER_SEC
v3
- add define for TCG_KICK_FREQ
- fix checkpatch warning
v4
- wrap next calc in inline qemu_tcg_next_kick() instead of macro
v5
- move all kick code into own section
- use global for timer
- add helper functions to start/stop timer
- stop timer when all cores paused
v7
- checkpatch > 80 char fix
---
cpus.c | 61 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/cpus.c b/cpus.c
index eaefaebffc..8f182dff72 100644
--- a/cpus.c
+++ b/cpus.c
@@ -763,6 +763,53 @@ void configure_icount(QemuOpts *opts, Error **errp)
}
/***********************************************************/
+/* TCG vCPU kick timer
+ *
+ * The kick timer is responsible for moving single threaded vCPU
+ * emulation on to the next vCPU. If more than one vCPU is running a
+ * timer event with force a cpu->exit so the next vCPU can get
+ * scheduled.
+ *
+ * The timer is removed if all vCPUs are idle and restarted again once
+ * idleness is complete.
+ */
+
+static QEMUTimer *tcg_kick_vcpu_timer;
+
+static void qemu_cpu_kick_no_halt(void);
+
+#define TCG_KICK_PERIOD (NANOSECONDS_PER_SECOND / 10)
+
+static inline int64_t qemu_tcg_next_kick(void)
+{
+ return qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + TCG_KICK_PERIOD;
+}
+
+static void kick_tcg_thread(void *opaque)
+{
+ timer_mod(tcg_kick_vcpu_timer, qemu_tcg_next_kick());
+ qemu_cpu_kick_no_halt();
+}
+
+static void start_tcg_kick_timer(void)
+{
+ if (!tcg_kick_vcpu_timer && CPU_NEXT(first_cpu)) {
+ tcg_kick_vcpu_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
+ kick_tcg_thread, NULL);
+ timer_mod(tcg_kick_vcpu_timer, qemu_tcg_next_kick());
+ }
+}
+
+static void stop_tcg_kick_timer(void)
+{
+ if (tcg_kick_vcpu_timer) {
+ timer_del(tcg_kick_vcpu_timer);
+ tcg_kick_vcpu_timer = NULL;
+ }
+}
+
+
+/***********************************************************/
void hw_error(const char *fmt, ...)
{
va_list ap;
@@ -1016,9 +1063,12 @@ static void qemu_wait_io_event_common(CPUState *cpu)
static void qemu_tcg_wait_io_event(CPUState *cpu)
{
while (all_cpu_threads_idle()) {
+ stop_tcg_kick_timer();
qemu_cond_wait(cpu->halt_cond, &qemu_global_mutex);
}
+ start_tcg_kick_timer();
+
while (iothread_requesting_mutex) {
qemu_cond_wait(&qemu_io_proceeded_cond, &qemu_global_mutex);
}
@@ -1218,6 +1268,15 @@ static void deal_with_unplugged_cpus(void)
}
}
+/* Single-threaded TCG
+ *
+ * In the single-threaded case each vCPU is simulated in turn. If
+ * there is more than a single vCPU we create a simple timer to kick
+ * the vCPU and ensure we don't get stuck in a tight loop in one vCPU.
+ * This is done explicitly rather than relying on side-effects
+ * elsewhere.
+ */
+
static void *qemu_tcg_cpu_thread_fn(void *arg)
{
CPUState *cpu = arg;
@@ -1244,6 +1303,8 @@ static void *qemu_tcg_cpu_thread_fn(void *arg)
}
}
+ start_tcg_kick_timer();
+
/* process any pending work */
atomic_mb_set(&exit_request, 1);
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* [Qemu-devel] [PATCH v7 07/27] tcg: rename tcg_current_cpu to tcg_current_rr_cpu
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (5 preceding siblings ...)
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 06/27] tcg: add kick timer for single-threaded vCPU emulation Alex Bennée
@ 2017-01-19 17:04 ` Alex Bennée
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 08/27] tcg: drop global lock during TCG code execution Alex Bennée
` (19 subsequent siblings)
26 siblings, 0 replies; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:04 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, Peter Crosthwaite
..and make the definition local to cpus. In preparation for MTTCG the
concept of a global tcg_current_cpu will no longer make sense. However
we still need to keep track of it in the single-threaded case to be able
to exit quickly when required.
qemu_cpu_kick_no_halt() moves and becomes qemu_cpu_kick_rr_cpu() to
emphasise its use-case. qemu_cpu_kick now kicks the relevant cpu as
well as qemu_kick_rr_cpu() which will become a no-op in MTTCG.
For the time being the setting of the global exit_request remains.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
---
v4:
- keep global exit_request setting for now
- fix merge conflicts
v5:
- merge conflicts with kick changes
---
cpu-exec-common.c | 1 -
cpu-exec.c | 3 ---
cpus.c | 41 ++++++++++++++++++++++-------------------
include/exec/exec-all.h | 1 -
4 files changed, 22 insertions(+), 24 deletions(-)
diff --git a/cpu-exec-common.c b/cpu-exec-common.c
index 767d9c6f0c..e2bc053372 100644
--- a/cpu-exec-common.c
+++ b/cpu-exec-common.c
@@ -24,7 +24,6 @@
#include "exec/memory-internal.h"
bool exit_request;
-CPUState *tcg_current_cpu;
/* exit the current TB, but without causing any exception to be raised */
void cpu_loop_exit_noexc(CPUState *cpu)
diff --git a/cpu-exec.c b/cpu-exec.c
index 1b8685dc21..f9e836c8dd 100644
--- a/cpu-exec.c
+++ b/cpu-exec.c
@@ -609,7 +609,6 @@ int cpu_exec(CPUState *cpu)
return EXCP_HALTED;
}
- atomic_mb_set(&tcg_current_cpu, cpu);
rcu_read_lock();
if (unlikely(atomic_mb_read(&exit_request))) {
@@ -668,7 +667,5 @@ int cpu_exec(CPUState *cpu)
/* fail safe : never use current_cpu outside cpu_exec() */
current_cpu = NULL;
- /* Does not need atomic_mb_set because a spurious wakeup is okay. */
- atomic_set(&tcg_current_cpu, NULL);
return ret;
}
diff --git a/cpus.c b/cpus.c
index 8f182dff72..1c76f36d89 100644
--- a/cpus.c
+++ b/cpus.c
@@ -775,8 +775,7 @@ void configure_icount(QemuOpts *opts, Error **errp)
*/
static QEMUTimer *tcg_kick_vcpu_timer;
-
-static void qemu_cpu_kick_no_halt(void);
+static CPUState *tcg_current_rr_cpu;
#define TCG_KICK_PERIOD (NANOSECONDS_PER_SECOND / 10)
@@ -785,10 +784,23 @@ static inline int64_t qemu_tcg_next_kick(void)
return qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + TCG_KICK_PERIOD;
}
+/* Kick the currently round-robin scheduled vCPU */
+static void qemu_cpu_kick_rr_cpu(void)
+{
+ CPUState *cpu;
+ atomic_mb_set(&exit_request, 1);
+ do {
+ cpu = atomic_mb_read(&tcg_current_rr_cpu);
+ if (cpu) {
+ cpu_exit(cpu);
+ }
+ } while (cpu != atomic_mb_read(&tcg_current_rr_cpu));
+}
+
static void kick_tcg_thread(void *opaque)
{
timer_mod(tcg_kick_vcpu_timer, qemu_tcg_next_kick());
- qemu_cpu_kick_no_halt();
+ qemu_cpu_kick_rr_cpu();
}
static void start_tcg_kick_timer(void)
@@ -808,7 +820,6 @@ static void stop_tcg_kick_timer(void)
}
}
-
/***********************************************************/
void hw_error(const char *fmt, ...)
{
@@ -1319,6 +1330,7 @@ static void *qemu_tcg_cpu_thread_fn(void *arg)
}
for (; cpu != NULL && !exit_request; cpu = CPU_NEXT(cpu)) {
+ atomic_mb_set(&tcg_current_rr_cpu, cpu);
qemu_clock_enable(QEMU_CLOCK_VIRTUAL,
(cpu->singlestep_enabled & SSTEP_NOTIMER) == 0);
@@ -1338,6 +1350,8 @@ static void *qemu_tcg_cpu_thread_fn(void *arg)
}
} /* for cpu.. */
+ /* Does not need atomic_mb_set because a spurious wakeup is okay. */
+ atomic_set(&tcg_current_rr_cpu, NULL);
/* Pairs with smp_wmb in qemu_cpu_kick. */
atomic_mb_set(&exit_request, 0);
@@ -1370,24 +1384,13 @@ static void qemu_cpu_kick_thread(CPUState *cpu)
#endif
}
-static void qemu_cpu_kick_no_halt(void)
-{
- CPUState *cpu;
- /* Ensure whatever caused the exit has reached the CPU threads before
- * writing exit_request.
- */
- atomic_mb_set(&exit_request, 1);
- cpu = atomic_mb_read(&tcg_current_cpu);
- if (cpu) {
- cpu_exit(cpu);
- }
-}
-
void qemu_cpu_kick(CPUState *cpu)
{
qemu_cond_broadcast(cpu->halt_cond);
if (tcg_enabled()) {
- qemu_cpu_kick_no_halt();
+ cpu_exit(cpu);
+ /* Also ensure current RR cpu is kicked */
+ qemu_cpu_kick_rr_cpu();
} else {
qemu_cpu_kick_thread(cpu);
}
@@ -1428,7 +1431,7 @@ void qemu_mutex_lock_iothread(void)
atomic_dec(&iothread_requesting_mutex);
} else {
if (qemu_mutex_trylock(&qemu_global_mutex)) {
- qemu_cpu_kick_no_halt();
+ qemu_cpu_kick_rr_cpu();
qemu_mutex_lock(&qemu_global_mutex);
}
atomic_dec(&iothread_requesting_mutex);
diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h
index bbc9478a50..3cbd359dd7 100644
--- a/include/exec/exec-all.h
+++ b/include/exec/exec-all.h
@@ -404,7 +404,6 @@ bool memory_region_is_unassigned(MemoryRegion *mr);
extern int singlestep;
/* cpu-exec.c, accessed with atomic_mb_read/atomic_mb_set */
-extern CPUState *tcg_current_cpu;
extern bool exit_request;
#endif
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* [Qemu-devel] [PATCH v7 08/27] tcg: drop global lock during TCG code execution
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (6 preceding siblings ...)
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 07/27] tcg: rename tcg_current_cpu to tcg_current_rr_cpu Alex Bennée
@ 2017-01-19 17:04 ` Alex Bennée
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 09/27] tcg: remove global exit_request Alex Bennée
` (18 subsequent siblings)
26 siblings, 0 replies; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:04 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, Peter Crosthwaite, Eduardo Habkost,
Michael S. Tsirkin, David Gibson, Alexander Graf,
open list:sPAPR
From: Jan Kiszka <jan.kiszka@siemens.com>
This finally allows TCG to benefit from the iothread introduction: Drop
the global mutex while running pure TCG CPU code. Reacquire the lock
when entering MMIO or PIO emulation, or when leaving the TCG loop.
We have to revert a few optimization for the current TCG threading
model, namely kicking the TCG thread in qemu_mutex_lock_iothread and not
kicking it in qemu_cpu_kick. We also need to disable RAM block
reordering until we have a more efficient locking mechanism at hand.
Still, a Linux x86 UP guest and my Musicpal ARM model boot fine here.
These numbers demonstrate where we gain something:
20338 jan 20 0 331m 75m 6904 R 99 0.9 0:50.95 qemu-system-arm
20337 jan 20 0 331m 75m 6904 S 20 0.9 0:26.50 qemu-system-arm
The guest CPU was fully loaded, but the iothread could still run mostly
independent on a second core. Without the patch we don't get beyond
32206 jan 20 0 330m 73m 7036 R 82 0.9 1:06.00 qemu-system-arm
32204 jan 20 0 330m 73m 7036 S 21 0.9 0:17.03 qemu-system-arm
We don't benefit significantly, though, when the guest is not fully
loading a host CPU.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <1439220437-23957-10-git-send-email-fred.konrad@greensocs.com>
[FK: Rebase, fix qemu_devices_reset deadlock, rm address_space_* mutex]
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[EGC: fixed iothread lock for cpu-exec IRQ handling]
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: -smp single-threaded fix, rm old info from commit msg, review updates]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
---
v5 (ajb, base patches):
- added an assert to BQL unlock/lock functions instead of hanging
- ensure all cpu->interrupt_requests *modifications* protected by BQL
- add a re-read on cpu->interrupt_request for correctness
- BQL fixes for:
- assert BQL held for PPC hypercalls (emulate_spar_hypercall)
- SCLP service calls on s390x
- merge conflict with kick timer patch
v4 (ajb, base patches):
- protect cpu->interrupt updates with BQL
- fix wording io_mem_notdirty calls
- s/we/with/
v3 (ajb, base-patches):
- stale iothread_unlocks removed (cpu_exit/resume_from_signal deals
with it in the longjmp).
- fix re-base conflicts
v2 (ajb):
- merge with tcg: grab iothread lock in cpu-exec interrupt handling
- use existing fns for tracking lock state
- lock iothread for mem_region
- add assert on mem region modification
- ensure smm_helper holds iothread
- Add JK s-o-b
- Fix-up FK s-o-b annotation
v1 (ajb, base-patches):
- SMP failure now fixed by previous commit
Changes from Fred Konrad (mttcg-v7 via paolo):
* Rebase on the current HEAD.
* Fixes a deadlock in qemu_devices_reset().
* Remove the mutex in address_space_*
---
cpu-exec.c | 20 ++++++++++++++++++--
cpus.c | 28 +++++-----------------------
cputlb.c | 21 ++++++++++++++++++++-
exec.c | 12 +++++++++---
hw/core/irq.c | 1 +
hw/i386/kvmvapic.c | 4 ++--
hw/ppc/spapr.c | 3 +++
include/qom/cpu.h | 1 +
memory.c | 2 ++
qom/cpu.c | 10 ++++++++++
target/i386/smm_helper.c | 7 +++++++
target/s390x/misc_helper.c | 5 ++++-
translate-all.c | 9 +++++++--
translate-common.c | 21 +++++++++++----------
14 files changed, 100 insertions(+), 44 deletions(-)
diff --git a/cpu-exec.c b/cpu-exec.c
index f9e836c8dd..f42a128bdf 100644
--- a/cpu-exec.c
+++ b/cpu-exec.c
@@ -29,6 +29,7 @@
#include "qemu/rcu.h"
#include "exec/tb-hash.h"
#include "exec/log.h"
+#include "qemu/main-loop.h"
#if defined(TARGET_I386) && !defined(CONFIG_USER_ONLY)
#include "hw/i386/apic.h"
#endif
@@ -388,8 +389,10 @@ static inline bool cpu_handle_halt(CPUState *cpu)
if ((cpu->interrupt_request & CPU_INTERRUPT_POLL)
&& replay_interrupt()) {
X86CPU *x86_cpu = X86_CPU(cpu);
+ qemu_mutex_lock_iothread();
apic_poll_irq(x86_cpu->apic_state);
cpu_reset_interrupt(cpu, CPU_INTERRUPT_POLL);
+ qemu_mutex_unlock_iothread();
}
#endif
if (!cpu_has_work(cpu)) {
@@ -443,7 +446,9 @@ static inline bool cpu_handle_exception(CPUState *cpu, int *ret)
#else
if (replay_exception()) {
CPUClass *cc = CPU_GET_CLASS(cpu);
+ qemu_mutex_lock_iothread();
cc->do_interrupt(cpu);
+ qemu_mutex_unlock_iothread();
cpu->exception_index = -1;
} else if (!replay_has_interrupt()) {
/* give a chance to iothread in replay mode */
@@ -469,9 +474,11 @@ static inline void cpu_handle_interrupt(CPUState *cpu,
TranslationBlock **last_tb)
{
CPUClass *cc = CPU_GET_CLASS(cpu);
- int interrupt_request = cpu->interrupt_request;
- if (unlikely(interrupt_request)) {
+ if (unlikely(atomic_read(&cpu->interrupt_request))) {
+ int interrupt_request;
+ qemu_mutex_lock_iothread();
+ interrupt_request = cpu->interrupt_request;
if (unlikely(cpu->singlestep_enabled & SSTEP_NOIRQ)) {
/* Mask out external interrupts for this step. */
interrupt_request &= ~CPU_INTERRUPT_SSTEP_MASK;
@@ -526,7 +533,12 @@ static inline void cpu_handle_interrupt(CPUState *cpu,
the program flow was changed */
*last_tb = NULL;
}
+
+ /* If we exit via cpu_loop_exit/longjmp it is reset in cpu_exec */
+ qemu_mutex_unlock_iothread();
}
+
+
if (unlikely(atomic_read(&cpu->exit_request) || replay_has_interrupt())) {
atomic_set(&cpu->exit_request, 0);
cpu->exception_index = EXCP_INTERRUPT;
@@ -656,8 +668,12 @@ int cpu_exec(CPUState *cpu)
g_assert(cpu == current_cpu);
g_assert(cc == CPU_GET_CLASS(cpu));
#endif /* buggy compiler */
+
cpu->can_do_io = 1;
tb_lock_reset();
+ if (qemu_mutex_iothread_locked()) {
+ qemu_mutex_unlock_iothread();
+ }
}
} /* for(;;) */
diff --git a/cpus.c b/cpus.c
index 1c76f36d89..b78c093550 100644
--- a/cpus.c
+++ b/cpus.c
@@ -1022,8 +1022,6 @@ static void qemu_kvm_init_cpu_signals(CPUState *cpu)
#endif /* _WIN32 */
static QemuMutex qemu_global_mutex;
-static QemuCond qemu_io_proceeded_cond;
-static unsigned iothread_requesting_mutex;
static QemuThread io_thread;
@@ -1037,7 +1035,6 @@ void qemu_init_cpu_loop(void)
qemu_init_sigbus();
qemu_cond_init(&qemu_cpu_cond);
qemu_cond_init(&qemu_pause_cond);
- qemu_cond_init(&qemu_io_proceeded_cond);
qemu_mutex_init(&qemu_global_mutex);
qemu_thread_get_self(&io_thread);
@@ -1080,10 +1077,6 @@ static void qemu_tcg_wait_io_event(CPUState *cpu)
start_tcg_kick_timer();
- while (iothread_requesting_mutex) {
- qemu_cond_wait(&qemu_io_proceeded_cond, &qemu_global_mutex);
- }
-
CPU_FOREACH(cpu) {
qemu_wait_io_event_common(cpu);
}
@@ -1244,9 +1237,11 @@ static int tcg_cpu_exec(CPUState *cpu)
cpu->icount_decr.u16.low = decr;
cpu->icount_extra = count;
}
+ qemu_mutex_unlock_iothread();
cpu_exec_start(cpu);
ret = cpu_exec(cpu);
cpu_exec_end(cpu);
+ qemu_mutex_lock_iothread();
#ifdef CONFIG_PROFILER
tcg_time += profile_getclock() - ti;
#endif
@@ -1421,27 +1416,14 @@ bool qemu_mutex_iothread_locked(void)
void qemu_mutex_lock_iothread(void)
{
- atomic_inc(&iothread_requesting_mutex);
- /* In the simple case there is no need to bump the VCPU thread out of
- * TCG code execution.
- */
- if (!tcg_enabled() || qemu_in_vcpu_thread() ||
- !first_cpu || !first_cpu->created) {
- qemu_mutex_lock(&qemu_global_mutex);
- atomic_dec(&iothread_requesting_mutex);
- } else {
- if (qemu_mutex_trylock(&qemu_global_mutex)) {
- qemu_cpu_kick_rr_cpu();
- qemu_mutex_lock(&qemu_global_mutex);
- }
- atomic_dec(&iothread_requesting_mutex);
- qemu_cond_broadcast(&qemu_io_proceeded_cond);
- }
+ g_assert(!qemu_mutex_iothread_locked());
+ qemu_mutex_lock(&qemu_global_mutex);
iothread_locked = true;
}
void qemu_mutex_unlock_iothread(void)
{
+ g_assert(qemu_mutex_iothread_locked());
iothread_locked = false;
qemu_mutex_unlock(&qemu_global_mutex);
}
diff --git a/cputlb.c b/cputlb.c
index 6c39927455..1cc9d9da51 100644
--- a/cputlb.c
+++ b/cputlb.c
@@ -18,6 +18,7 @@
*/
#include "qemu/osdep.h"
+#include "qemu/main-loop.h"
#include "cpu.h"
#include "exec/exec-all.h"
#include "exec/memory.h"
@@ -495,6 +496,7 @@ static uint64_t io_readx(CPUArchState *env, CPUIOTLBEntry *iotlbentry,
hwaddr physaddr = iotlbentry->addr;
MemoryRegion *mr = iotlb_to_region(cpu, physaddr, iotlbentry->attrs);
uint64_t val;
+ bool locked = false;
physaddr = (physaddr & TARGET_PAGE_MASK) + addr;
cpu->mem_io_pc = retaddr;
@@ -503,7 +505,16 @@ static uint64_t io_readx(CPUArchState *env, CPUIOTLBEntry *iotlbentry,
}
cpu->mem_io_vaddr = addr;
+
+ if (mr->global_locking) {
+ qemu_mutex_lock_iothread();
+ locked = true;
+ }
memory_region_dispatch_read(mr, physaddr, &val, size, iotlbentry->attrs);
+ if (locked) {
+ qemu_mutex_unlock_iothread();
+ }
+
return val;
}
@@ -514,15 +525,23 @@ static void io_writex(CPUArchState *env, CPUIOTLBEntry *iotlbentry,
CPUState *cpu = ENV_GET_CPU(env);
hwaddr physaddr = iotlbentry->addr;
MemoryRegion *mr = iotlb_to_region(cpu, physaddr, iotlbentry->attrs);
+ bool locked = false;
physaddr = (physaddr & TARGET_PAGE_MASK) + addr;
if (mr != &io_mem_rom && mr != &io_mem_notdirty && !cpu->can_do_io) {
cpu_io_recompile(cpu, retaddr);
}
-
cpu->mem_io_vaddr = addr;
cpu->mem_io_pc = retaddr;
+
+ if (mr->global_locking) {
+ qemu_mutex_lock_iothread();
+ locked = true;
+ }
memory_region_dispatch_write(mr, physaddr, val, size, iotlbentry->attrs);
+ if (locked) {
+ qemu_mutex_unlock_iothread();
+ }
}
/* Return true if ADDR is present in the victim tlb, and has been copied
diff --git a/exec.c b/exec.c
index 401a9127c2..5c6dd2d07f 100644
--- a/exec.c
+++ b/exec.c
@@ -2128,9 +2128,9 @@ static void check_watchpoint(int offset, int len, MemTxAttrs attrs, int flags)
}
cpu->watchpoint_hit = wp;
- /* The tb_lock will be reset when cpu_loop_exit or
- * cpu_loop_exit_noexc longjmp back into the cpu_exec
- * main loop.
+ /* Both tb_lock and iothread_mutex will be reset when
+ * cpu_loop_exit or cpu_loop_exit_noexc longjmp
+ * back into the cpu_exec main loop.
*/
tb_lock();
tb_check_watchpoint(cpu);
@@ -2365,8 +2365,14 @@ static void io_mem_init(void)
memory_region_init_io(&io_mem_rom, NULL, &unassigned_mem_ops, NULL, NULL, UINT64_MAX);
memory_region_init_io(&io_mem_unassigned, NULL, &unassigned_mem_ops, NULL,
NULL, UINT64_MAX);
+
+ /* io_mem_notdirty calls tb_invalidate_phys_page_fast,
+ * which can be called without the iothread mutex.
+ */
memory_region_init_io(&io_mem_notdirty, NULL, ¬dirty_mem_ops, NULL,
NULL, UINT64_MAX);
+ memory_region_clear_global_locking(&io_mem_notdirty);
+
memory_region_init_io(&io_mem_watch, NULL, &watch_mem_ops, NULL,
NULL, UINT64_MAX);
}
diff --git a/hw/core/irq.c b/hw/core/irq.c
index 49ff2e64fe..b98d1d69f5 100644
--- a/hw/core/irq.c
+++ b/hw/core/irq.c
@@ -22,6 +22,7 @@
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
+#include "qemu/main-loop.h"
#include "qemu-common.h"
#include "hw/irq.h"
#include "qom/object.h"
diff --git a/hw/i386/kvmvapic.c b/hw/i386/kvmvapic.c
index b30d1b90c6..c8d908ede6 100644
--- a/hw/i386/kvmvapic.c
+++ b/hw/i386/kvmvapic.c
@@ -450,8 +450,8 @@ static void patch_instruction(VAPICROMState *s, X86CPU *cpu, target_ulong ip)
resume_all_vcpus();
if (!kvm_enabled()) {
- /* tb_lock will be reset when cpu_loop_exit_noexc longjmps
- * back into the cpu_exec loop. */
+ /* Both tb_lock and iothread_mutex will be reset when
+ * longjmps back into the cpu_exec loop. */
tb_lock();
tb_gen_code(cs, current_pc, current_cs_base, current_flags, 1);
cpu_loop_exit_noexc(cs);
diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
index 208ef7b110..d2efe835e7 100644
--- a/hw/ppc/spapr.c
+++ b/hw/ppc/spapr.c
@@ -1012,6 +1012,9 @@ static void emulate_spapr_hypercall(PowerPCCPU *cpu)
{
CPUPPCState *env = &cpu->env;
+ /* The TCG path should also be holding the BQL at this point */
+ g_assert(qemu_mutex_iothread_locked());
+
if (msr_pr) {
hcall_dprintf("Hypercall made with MSR[PR]=1\n");
env->gpr[3] = H_PRIVILEGE;
diff --git a/include/qom/cpu.h b/include/qom/cpu.h
index 541785aeda..1735374ad6 100644
--- a/include/qom/cpu.h
+++ b/include/qom/cpu.h
@@ -323,6 +323,7 @@ struct CPUState {
bool unplug;
bool crash_occurred;
bool exit_request;
+ /* updates protected by BQL */
uint32_t interrupt_request;
int singlestep_enabled;
int64_t icount_extra;
diff --git a/memory.c b/memory.c
index 2bfc37f65c..7d7b285e41 100644
--- a/memory.c
+++ b/memory.c
@@ -917,6 +917,8 @@ void memory_region_transaction_commit(void)
AddressSpace *as;
assert(memory_region_transaction_depth);
+ assert(qemu_mutex_iothread_locked());
+
--memory_region_transaction_depth;
if (!memory_region_transaction_depth) {
if (memory_region_update_pending) {
diff --git a/qom/cpu.c b/qom/cpu.c
index cee4e6f7b0..4f0cb40099 100644
--- a/qom/cpu.c
+++ b/qom/cpu.c
@@ -113,9 +113,19 @@ static void cpu_common_get_memory_mapping(CPUState *cpu,
error_setg(errp, "Obtaining memory mappings is unsupported on this CPU.");
}
+/* Resetting the IRQ comes from across the code base so we take the
+ * BQL here if we need to. cpu_interrupt assumes it is held.*/
void cpu_reset_interrupt(CPUState *cpu, int mask)
{
+ bool need_lock = !qemu_mutex_iothread_locked();
+
+ if (need_lock) {
+ qemu_mutex_lock_iothread();
+ }
cpu->interrupt_request &= ~mask;
+ if (need_lock) {
+ qemu_mutex_unlock_iothread();
+ }
}
void cpu_exit(CPUState *cpu)
diff --git a/target/i386/smm_helper.c b/target/i386/smm_helper.c
index 4dd6a2c544..f051a77c4a 100644
--- a/target/i386/smm_helper.c
+++ b/target/i386/smm_helper.c
@@ -18,6 +18,7 @@
*/
#include "qemu/osdep.h"
+#include "qemu/main-loop.h"
#include "cpu.h"
#include "exec/helper-proto.h"
#include "exec/log.h"
@@ -42,11 +43,14 @@ void helper_rsm(CPUX86State *env)
#define SMM_REVISION_ID 0x00020000
#endif
+/* Called with iothread lock taken */
void cpu_smm_update(X86CPU *cpu)
{
CPUX86State *env = &cpu->env;
bool smm_enabled = (env->hflags & HF_SMM_MASK);
+ g_assert(qemu_mutex_iothread_locked());
+
if (cpu->smram) {
memory_region_set_enabled(cpu->smram, smm_enabled);
}
@@ -333,7 +337,10 @@ void helper_rsm(CPUX86State *env)
}
env->hflags2 &= ~HF2_SMM_INSIDE_NMI_MASK;
env->hflags &= ~HF_SMM_MASK;
+
+ qemu_mutex_lock_iothread();
cpu_smm_update(cpu);
+ qemu_mutex_unlock_iothread();
qemu_log_mask(CPU_LOG_INT, "SMM: after RSM\n");
log_cpu_state_mask(CPU_LOG_INT, CPU(cpu), CPU_DUMP_CCOP);
diff --git a/target/s390x/misc_helper.c b/target/s390x/misc_helper.c
index c9604ea9c7..3cb942e8bb 100644
--- a/target/s390x/misc_helper.c
+++ b/target/s390x/misc_helper.c
@@ -25,6 +25,7 @@
#include "exec/helper-proto.h"
#include "sysemu/kvm.h"
#include "qemu/timer.h"
+#include "qemu/main-loop.h"
#include "exec/address-spaces.h"
#ifdef CONFIG_KVM
#include <linux/kvm.h>
@@ -109,11 +110,13 @@ void program_interrupt(CPUS390XState *env, uint32_t code, int ilen)
/* SCLP service call */
uint32_t HELPER(servc)(CPUS390XState *env, uint64_t r1, uint64_t r2)
{
+ qemu_mutex_lock_iothread();
int r = sclp_service_call(env, r1, r2);
if (r < 0) {
program_interrupt(env, -r, 4);
- return 0;
+ r = 0;
}
+ qemu_mutex_unlock_iothread();
return r;
}
diff --git a/translate-all.c b/translate-all.c
index 055436a676..41b36f04c6 100644
--- a/translate-all.c
+++ b/translate-all.c
@@ -55,6 +55,7 @@
#include "translate-all.h"
#include "qemu/bitmap.h"
#include "qemu/timer.h"
+#include "qemu/main-loop.h"
#include "exec/log.h"
/* #define DEBUG_TB_INVALIDATE */
@@ -1521,7 +1522,7 @@ void tb_invalidate_phys_page_range(tb_page_addr_t start, tb_page_addr_t end,
#ifdef CONFIG_SOFTMMU
/* len must be <= 8 and start must be a multiple of len.
* Called via softmmu_template.h when code areas are written to with
- * tb_lock held.
+ * iothread mutex not held.
*/
void tb_invalidate_phys_page_fast(tb_page_addr_t start, int len)
{
@@ -1723,7 +1724,10 @@ void tb_check_watchpoint(CPUState *cpu)
#ifndef CONFIG_USER_ONLY
/* in deterministic execution mode, instructions doing device I/Os
- must be at the end of the TB */
+ * must be at the end of the TB.
+ *
+ * Called by softmmu_template.h, with iothread mutex not held.
+ */
void cpu_io_recompile(CPUState *cpu, uintptr_t retaddr)
{
#if defined(TARGET_MIPS) || defined(TARGET_SH4)
@@ -1935,6 +1939,7 @@ void dump_opcount_info(FILE *f, fprintf_function cpu_fprintf)
void cpu_interrupt(CPUState *cpu, int mask)
{
+ g_assert(qemu_mutex_iothread_locked());
cpu->interrupt_request |= mask;
cpu->tcg_exit_req = 1;
}
diff --git a/translate-common.c b/translate-common.c
index 5e989cdf70..d504dd0d33 100644
--- a/translate-common.c
+++ b/translate-common.c
@@ -21,6 +21,7 @@
#include "qemu-common.h"
#include "qom/cpu.h"
#include "sysemu/cpus.h"
+#include "qemu/main-loop.h"
uintptr_t qemu_real_host_page_size;
intptr_t qemu_real_host_page_mask;
@@ -30,6 +31,7 @@ intptr_t qemu_real_host_page_mask;
static void tcg_handle_interrupt(CPUState *cpu, int mask)
{
int old_mask;
+ g_assert(qemu_mutex_iothread_locked());
old_mask = cpu->interrupt_request;
cpu->interrupt_request |= mask;
@@ -40,17 +42,16 @@ static void tcg_handle_interrupt(CPUState *cpu, int mask)
*/
if (!qemu_cpu_is_self(cpu)) {
qemu_cpu_kick(cpu);
- return;
- }
-
- if (use_icount) {
- cpu->icount_decr.u16.high = 0xffff;
- if (!cpu->can_do_io
- && (mask & ~old_mask) != 0) {
- cpu_abort(cpu, "Raised interrupt while not in I/O function");
- }
} else {
- cpu->tcg_exit_req = 1;
+ if (use_icount) {
+ cpu->icount_decr.u16.high = 0xffff;
+ if (!cpu->can_do_io
+ && (mask & ~old_mask) != 0) {
+ cpu_abort(cpu, "Raised interrupt while not in I/O function");
+ }
+ } else {
+ cpu->tcg_exit_req = 1;
+ }
}
}
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* [Qemu-devel] [PATCH v7 09/27] tcg: remove global exit_request
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (7 preceding siblings ...)
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 08/27] tcg: drop global lock during TCG code execution Alex Bennée
@ 2017-01-19 17:04 ` Alex Bennée
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 10/27] tcg: enable tb_lock() for SoftMMU Alex Bennée
` (17 subsequent siblings)
26 siblings, 0 replies; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:04 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, Peter Crosthwaite
There are now only two uses of the global exit_request left.
The first ensures we exit the run_loop when we first start to process
pending work and in the kick handler. This is just as easily done by
setting the first_cpu->exit_request flag.
The second use is in the round robin kick routine. The global
exit_request ensured every vCPU would set its local exit_request and
cause a full exit of the loop. Now the iothread isn't being held while
running we can just rely on the kick handler to push us out as intended.
We lightly re-factor the main vCPU thread to ensure cpu->exit_requests
cause us to exit the main loop and process any IO requests that might
come along.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
---
v5
- minor merge conflict with kick patch
v4
- moved to after iothread unlocking patch
- needed to remove kick exit_request as well.
- remove extraneous cpu->exit_request check
- remove stray exit_request setting
- remove needless atomic operation
---
cpu-exec-common.c | 2 --
cpu-exec.c | 9 ++-------
cpus.c | 18 ++++++++++--------
include/exec/exec-all.h | 3 ---
4 files changed, 12 insertions(+), 20 deletions(-)
diff --git a/cpu-exec-common.c b/cpu-exec-common.c
index e2bc053372..0504a9457b 100644
--- a/cpu-exec-common.c
+++ b/cpu-exec-common.c
@@ -23,8 +23,6 @@
#include "exec/exec-all.h"
#include "exec/memory-internal.h"
-bool exit_request;
-
/* exit the current TB, but without causing any exception to be raised */
void cpu_loop_exit_noexc(CPUState *cpu)
{
diff --git a/cpu-exec.c b/cpu-exec.c
index f42a128bdf..cc09c1fc37 100644
--- a/cpu-exec.c
+++ b/cpu-exec.c
@@ -565,9 +565,8 @@ static inline void cpu_loop_exec_tb(CPUState *cpu, TranslationBlock *tb,
/* Something asked us to stop executing
* chained TBs; just continue round the main
* loop. Whatever requested the exit will also
- * have set something else (eg exit_request or
- * interrupt_request) which we will handle
- * next time around the loop. But we need to
+ * have set something else (eg interrupt_request) which we
+ * will handle next time around the loop. But we need to
* ensure the tcg_exit_req read in generated code
* comes before the next read of cpu->exit_request
* or cpu->interrupt_request.
@@ -623,10 +622,6 @@ int cpu_exec(CPUState *cpu)
rcu_read_lock();
- if (unlikely(atomic_mb_read(&exit_request))) {
- cpu->exit_request = 1;
- }
-
cc->cpu_exec_enter(cpu);
/* Calculate difference between guest clock and host clock.
diff --git a/cpus.c b/cpus.c
index b78c093550..7f2c6226d8 100644
--- a/cpus.c
+++ b/cpus.c
@@ -788,7 +788,6 @@ static inline int64_t qemu_tcg_next_kick(void)
static void qemu_cpu_kick_rr_cpu(void)
{
CPUState *cpu;
- atomic_mb_set(&exit_request, 1);
do {
cpu = atomic_mb_read(&tcg_current_rr_cpu);
if (cpu) {
@@ -1311,11 +1310,11 @@ static void *qemu_tcg_cpu_thread_fn(void *arg)
start_tcg_kick_timer();
- /* process any pending work */
- atomic_mb_set(&exit_request, 1);
-
cpu = first_cpu;
+ /* process any pending work */
+ cpu->exit_request = 1;
+
while (1) {
/* Account partial waits to QEMU_CLOCK_VIRTUAL. */
qemu_account_warp_timer();
@@ -1324,7 +1323,7 @@ static void *qemu_tcg_cpu_thread_fn(void *arg)
cpu = first_cpu;
}
- for (; cpu != NULL && !exit_request; cpu = CPU_NEXT(cpu)) {
+ while (cpu && !cpu->exit_request) {
atomic_mb_set(&tcg_current_rr_cpu, cpu);
qemu_clock_enable(QEMU_CLOCK_VIRTUAL,
@@ -1344,12 +1343,15 @@ static void *qemu_tcg_cpu_thread_fn(void *arg)
break;
}
- } /* for cpu.. */
+ cpu = CPU_NEXT(cpu);
+ } /* while (cpu && !cpu->exit_request).. */
+
/* Does not need atomic_mb_set because a spurious wakeup is okay. */
atomic_set(&tcg_current_rr_cpu, NULL);
- /* Pairs with smp_wmb in qemu_cpu_kick. */
- atomic_mb_set(&exit_request, 0);
+ if (cpu && cpu->exit_request) {
+ atomic_mb_set(&cpu->exit_request, 0);
+ }
handle_icount_deadline();
diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h
index 3cbd359dd7..bd4622ac5d 100644
--- a/include/exec/exec-all.h
+++ b/include/exec/exec-all.h
@@ -403,7 +403,4 @@ bool memory_region_is_unassigned(MemoryRegion *mr);
/* vl.c */
extern int singlestep;
-/* cpu-exec.c, accessed with atomic_mb_read/atomic_mb_set */
-extern bool exit_request;
-
#endif
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* [Qemu-devel] [PATCH v7 10/27] tcg: enable tb_lock() for SoftMMU
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (8 preceding siblings ...)
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 09/27] tcg: remove global exit_request Alex Bennée
@ 2017-01-19 17:04 ` Alex Bennée
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 11/27] tcg: enable thread-per-vCPU Alex Bennée
` (16 subsequent siblings)
26 siblings, 0 replies; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:04 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, Peter Crosthwaite
tb_lock() has long been used for linux-user mode to protect code
generation. By enabling it now we prepare for MTTCG and ensure all code
generation is serialised by this lock. The other major structure that
needs protecting is the l1_map and its PageDesc structures. For the
SoftMMU case we also use tb_lock() to protect these structures instead
of linux-user mmap_lock() which as the name suggests serialises updates
to the structure as a result of guest mmap operations.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
---
v4
- split from main tcg: enable thread-per-vCPU patch
v7
- fixed up with Pranith's tcg_debug_assert() changes
---
translate-all.c | 15 +--------------
1 file changed, 1 insertion(+), 14 deletions(-)
diff --git a/translate-all.c b/translate-all.c
index 41b36f04c6..87e9d00d14 100644
--- a/translate-all.c
+++ b/translate-all.c
@@ -75,7 +75,7 @@
* mmap_lock.
*/
#ifdef CONFIG_SOFTMMU
-#define assert_memory_lock() do { /* nothing */ } while (0)
+#define assert_memory_lock() tcg_debug_assert(have_tb_lock)
#else
#define assert_memory_lock() tcg_debug_assert(have_mmap_lock())
#endif
@@ -135,9 +135,7 @@ TCGContext tcg_ctx;
bool parallel_cpus;
/* translation block context */
-#ifdef CONFIG_USER_ONLY
__thread int have_tb_lock;
-#endif
static void page_table_config_init(void)
{
@@ -159,40 +157,29 @@ static void page_table_config_init(void)
assert(v_l2_levels >= 0);
}
-#ifdef CONFIG_USER_ONLY
#define assert_tb_locked() tcg_debug_assert(have_tb_lock)
#define assert_tb_unlocked() tcg_debug_assert(!have_tb_lock)
-#else
-#define assert_tb_locked() do { /* nothing */ } while (0)
-#define assert_tb_unlocked() do { /* nothing */ } while (0)
-#endif
void tb_lock(void)
{
-#ifdef CONFIG_USER_ONLY
assert_tb_unlocked();
qemu_mutex_lock(&tcg_ctx.tb_ctx.tb_lock);
have_tb_lock++;
-#endif
}
void tb_unlock(void)
{
-#ifdef CONFIG_USER_ONLY
assert_tb_locked();
have_tb_lock--;
qemu_mutex_unlock(&tcg_ctx.tb_ctx.tb_lock);
-#endif
}
void tb_lock_reset(void)
{
-#ifdef CONFIG_USER_ONLY
if (have_tb_lock) {
qemu_mutex_unlock(&tcg_ctx.tb_ctx.tb_lock);
have_tb_lock = 0;
}
-#endif
}
static TranslationBlock *tb_find_pc(uintptr_t tc_ptr);
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* [Qemu-devel] [PATCH v7 11/27] tcg: enable thread-per-vCPU
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (9 preceding siblings ...)
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 10/27] tcg: enable tb_lock() for SoftMMU Alex Bennée
@ 2017-01-19 17:04 ` Alex Bennée
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 12/27] tcg: handle EXCP_ATOMIC exception for system emulation Alex Bennée
` (15 subsequent siblings)
26 siblings, 0 replies; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:04 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, Peter Crosthwaite
There are a couple of changes that occur at the same time here:
- introduce a single vCPU qemu_tcg_cpu_thread_fn
One of these is spawned per vCPU with its own Thread and Condition
variables. qemu_tcg_rr_cpu_thread_fn is the new name for the old
single threaded function.
- the TLS current_cpu variable is now live for the lifetime of MTTCG
vCPU threads. This is for future work where async jobs need to know
the vCPU context they are operating in.
The user to switch on multi-thread behaviour and spawn a thread
per-vCPU. For a simple test kvm-unit-test like:
./arm/run ./arm/locking-test.flat -smp 4 -accel tcg,thread=multi
Will now use 4 vCPU threads and have an expected FAIL (instead of the
unexpected PASS) as the default mode of the test has no protection when
incrementing a shared variable.
We enable the parallel_cpus flag to ensure we generate correct barrier
and atomic code if supported by the front and backends. As each back end
and front end is updated they can add CONFIG_MTTCG_TARGET and
CONFIG_MTTCG_HOST to their respective make configurations so
default_mttcg_enabled does the right thing.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AJB: Some fixes, conditionally, commit rewording]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
---
v1 (ajb):
- fix merge conflicts
- maintain single-thread approach
v2
- re-base fixes (no longer has tb_find_fast lock tweak ahead)
- remove bogus break condition on cpu->stop/stopped
- only process exiting cpus exit_request
- handle all cpus idle case (fixes shutdown issues)
- sleep on EXCP_HALTED in mttcg mode (prevent crash on start-up)
- move icount timer into helper
v3
- update the commit message
- rm kick_timer tweaks (move to earlier tcg_current_cpu tweaks)
- ensure linux-user clears cpu->exit_request in loop
- purging of global exit_request and tcg_current_cpu in earlier patches
- fix checkpatch warnings
v4
- don't break loop on stopped, we may never schedule next in RR mode
- make sure we flush iorequests of current cpu if we exited on one
- add tcg_cpu_exec_start/end wraps for async work functions
- stop killing of current_cpu on loop exit
- set current_cpu in the single thread function
- remove sleep special case, add qemu_tcg_should_sleep() for mttcg
- no need to atomic set cpu->exit_request going into the loop
- removed extraneous setting of exit_request
- split tb_lock() part of patch
- rename single thread fn to qemu_tcg_rr_cpu_thread_fn
v5
- enable parallel_cpus for MTTCG (for barriers/atomics)
- expand on CONFIG_ flags in commit message
v7
- move parallel_cpus down into the mttcg leg
- minor ws merge fix
---
cpu-exec.c | 5 ---
cpus.c | 135 +++++++++++++++++++++++++++++++++++++++++++++++--------------
2 files changed, 104 insertions(+), 36 deletions(-)
diff --git a/cpu-exec.c b/cpu-exec.c
index cc09c1fc37..ef328087be 100644
--- a/cpu-exec.c
+++ b/cpu-exec.c
@@ -396,7 +396,6 @@ static inline bool cpu_handle_halt(CPUState *cpu)
}
#endif
if (!cpu_has_work(cpu)) {
- current_cpu = NULL;
return true;
}
@@ -540,7 +539,6 @@ static inline void cpu_handle_interrupt(CPUState *cpu,
if (unlikely(atomic_read(&cpu->exit_request) || replay_has_interrupt())) {
- atomic_set(&cpu->exit_request, 0);
cpu->exception_index = EXCP_INTERRUPT;
cpu_loop_exit(cpu);
}
@@ -675,8 +673,5 @@ int cpu_exec(CPUState *cpu)
cc->cpu_exec_exit(cpu);
rcu_read_unlock();
- /* fail safe : never use current_cpu outside cpu_exec() */
- current_cpu = NULL;
-
return ret;
}
diff --git a/cpus.c b/cpus.c
index 7f2c6226d8..32e9ff4b34 100644
--- a/cpus.c
+++ b/cpus.c
@@ -44,6 +44,7 @@
#include "qemu/main-loop.h"
#include "qemu/bitmap.h"
#include "qemu/seqlock.h"
+#include "tcg.h"
#include "qapi-event.h"
#include "hw/nmi.h"
#include "sysemu/replay.h"
@@ -804,7 +805,7 @@ static void kick_tcg_thread(void *opaque)
static void start_tcg_kick_timer(void)
{
- if (!tcg_kick_vcpu_timer && CPU_NEXT(first_cpu)) {
+ if (!mttcg_enabled && !tcg_kick_vcpu_timer && CPU_NEXT(first_cpu)) {
tcg_kick_vcpu_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
kick_tcg_thread, NULL);
timer_mod(tcg_kick_vcpu_timer, qemu_tcg_next_kick());
@@ -1058,27 +1059,34 @@ static void qemu_tcg_destroy_vcpu(CPUState *cpu)
static void qemu_wait_io_event_common(CPUState *cpu)
{
+ atomic_mb_set(&cpu->thread_kicked, false);
if (cpu->stop) {
cpu->stop = false;
cpu->stopped = true;
qemu_cond_broadcast(&qemu_pause_cond);
}
process_queued_cpu_work(cpu);
- cpu->thread_kicked = false;
+}
+
+static bool qemu_tcg_should_sleep(CPUState *cpu)
+{
+ if (mttcg_enabled) {
+ return cpu_thread_is_idle(cpu);
+ } else {
+ return all_cpu_threads_idle();
+ }
}
static void qemu_tcg_wait_io_event(CPUState *cpu)
{
- while (all_cpu_threads_idle()) {
+ while (qemu_tcg_should_sleep(cpu)) {
stop_tcg_kick_timer();
qemu_cond_wait(cpu->halt_cond, &qemu_global_mutex);
}
start_tcg_kick_timer();
- CPU_FOREACH(cpu) {
- qemu_wait_io_event_common(cpu);
- }
+ qemu_wait_io_event_common(cpu);
}
static void qemu_kvm_wait_io_event(CPUState *cpu)
@@ -1149,6 +1157,7 @@ static void *qemu_dummy_cpu_thread_fn(void *arg)
qemu_thread_get_self(cpu->thread);
cpu->thread_id = qemu_get_thread_id();
cpu->can_do_io = 1;
+ current_cpu = cpu;
sigemptyset(&waitset);
sigaddset(&waitset, SIG_IPI);
@@ -1157,9 +1166,7 @@ static void *qemu_dummy_cpu_thread_fn(void *arg)
cpu->created = true;
qemu_cond_signal(&qemu_cpu_cond);
- current_cpu = cpu;
while (1) {
- current_cpu = NULL;
qemu_mutex_unlock_iothread();
do {
int sig;
@@ -1170,7 +1177,6 @@ static void *qemu_dummy_cpu_thread_fn(void *arg)
exit(1);
}
qemu_mutex_lock_iothread();
- current_cpu = cpu;
qemu_wait_io_event_common(cpu);
}
@@ -1282,7 +1288,7 @@ static void deal_with_unplugged_cpus(void)
* elsewhere.
*/
-static void *qemu_tcg_cpu_thread_fn(void *arg)
+static void *qemu_tcg_rr_cpu_thread_fn(void *arg)
{
CPUState *cpu = arg;
@@ -1304,6 +1310,7 @@ static void *qemu_tcg_cpu_thread_fn(void *arg)
/* process any pending work */
CPU_FOREACH(cpu) {
+ current_cpu = cpu;
qemu_wait_io_event_common(cpu);
}
}
@@ -1325,6 +1332,7 @@ static void *qemu_tcg_cpu_thread_fn(void *arg)
while (cpu && !cpu->exit_request) {
atomic_mb_set(&tcg_current_rr_cpu, cpu);
+ current_cpu = cpu;
qemu_clock_enable(QEMU_CLOCK_VIRTUAL,
(cpu->singlestep_enabled & SSTEP_NOTIMER) == 0);
@@ -1336,7 +1344,7 @@ static void *qemu_tcg_cpu_thread_fn(void *arg)
cpu_handle_guest_debug(cpu);
break;
}
- } else if (cpu->stop || cpu->stopped) {
+ } else if (cpu->stop) {
if (cpu->unplug) {
cpu = CPU_NEXT(cpu);
}
@@ -1355,13 +1363,71 @@ static void *qemu_tcg_cpu_thread_fn(void *arg)
handle_icount_deadline();
- qemu_tcg_wait_io_event(QTAILQ_FIRST(&cpus));
+ qemu_tcg_wait_io_event(cpu ? cpu : QTAILQ_FIRST(&cpus));
deal_with_unplugged_cpus();
}
return NULL;
}
+/* Multi-threaded TCG
+ *
+ * In the multi-threaded case each vCPU has its own thread. The TLS
+ * variable current_cpu can be used deep in the code to find the
+ * current CPUState for a given thread.
+ */
+
+static void *qemu_tcg_cpu_thread_fn(void *arg)
+{
+ CPUState *cpu = arg;
+
+ rcu_register_thread();
+
+ qemu_mutex_lock_iothread();
+ qemu_thread_get_self(cpu->thread);
+
+ cpu->thread_id = qemu_get_thread_id();
+ cpu->created = true;
+ cpu->can_do_io = 1;
+ current_cpu = cpu;
+ qemu_cond_signal(&qemu_cpu_cond);
+
+ /* process any pending work */
+ cpu->exit_request = 1;
+
+ while (1) {
+ if (cpu_can_run(cpu)) {
+ int r;
+ r = tcg_cpu_exec(cpu);
+ switch (r) {
+ case EXCP_DEBUG:
+ cpu_handle_guest_debug(cpu);
+ break;
+ case EXCP_HALTED:
+ /* during start-up the vCPU is reset and the thread is
+ * kicked several times. If we don't ensure we go back
+ * to sleep in the halted state we won't cleanly
+ * start-up when the vCPU is enabled.
+ *
+ * cpu->halted should ensure we sleep in wait_io_event
+ */
+ g_assert(cpu->halted);
+ break;
+ default:
+ /* Ignore everything else? */
+ break;
+ }
+ }
+
+ handle_icount_deadline();
+
+ atomic_mb_set(&cpu->exit_request, 0);
+ qemu_tcg_wait_io_event(cpu);
+ }
+
+ return NULL;
+}
+
static void qemu_cpu_kick_thread(CPUState *cpu)
{
#ifndef _WIN32
@@ -1386,7 +1452,7 @@ void qemu_cpu_kick(CPUState *cpu)
qemu_cond_broadcast(cpu->halt_cond);
if (tcg_enabled()) {
cpu_exit(cpu);
- /* Also ensure current RR cpu is kicked */
+ /* NOP unless doing single-thread RR */
qemu_cpu_kick_rr_cpu();
} else {
qemu_cpu_kick_thread(cpu);
@@ -1455,13 +1521,6 @@ void pause_all_vcpus(void)
if (qemu_in_vcpu_thread()) {
cpu_stop_current();
- if (!kvm_enabled()) {
- CPU_FOREACH(cpu) {
- cpu->stop = false;
- cpu->stopped = true;
- }
- return;
- }
}
while (!all_vcpus_paused()) {
@@ -1510,29 +1569,43 @@ void cpu_remove_sync(CPUState *cpu)
static void qemu_tcg_init_vcpu(CPUState *cpu)
{
char thread_name[VCPU_THREAD_NAME_SIZE];
- static QemuCond *tcg_halt_cond;
- static QemuThread *tcg_cpu_thread;
+ static QemuCond *single_tcg_halt_cond;
+ static QemuThread *single_tcg_cpu_thread;
- /* share a single thread for all cpus with TCG */
- if (!tcg_cpu_thread) {
+ if (qemu_tcg_mttcg_enabled() || !single_tcg_cpu_thread) {
cpu->thread = g_malloc0(sizeof(QemuThread));
cpu->halt_cond = g_malloc0(sizeof(QemuCond));
qemu_cond_init(cpu->halt_cond);
- tcg_halt_cond = cpu->halt_cond;
- snprintf(thread_name, VCPU_THREAD_NAME_SIZE, "CPU %d/TCG",
+
+ if (qemu_tcg_mttcg_enabled()) {
+ /* create a thread per vCPU with TCG (MTTCG) */
+ parallel_cpus = true;
+ snprintf(thread_name, VCPU_THREAD_NAME_SIZE, "CPU %d/TCG",
cpu->cpu_index);
- qemu_thread_create(cpu->thread, thread_name, qemu_tcg_cpu_thread_fn,
- cpu, QEMU_THREAD_JOINABLE);
+
+ qemu_thread_create(cpu->thread, thread_name, qemu_tcg_cpu_thread_fn,
+ cpu, QEMU_THREAD_JOINABLE);
+
+ } else {
+ /* share a single thread for all cpus with TCG */
+ snprintf(thread_name, VCPU_THREAD_NAME_SIZE, "ALL CPUs/TCG");
+ qemu_thread_create(cpu->thread, thread_name,
+ qemu_tcg_rr_cpu_thread_fn,
+ cpu, QEMU_THREAD_JOINABLE);
+
+ single_tcg_halt_cond = cpu->halt_cond;
+ single_tcg_cpu_thread = cpu->thread;
+ }
#ifdef _WIN32
cpu->hThread = qemu_thread_get_handle(cpu->thread);
#endif
while (!cpu->created) {
qemu_cond_wait(&qemu_cpu_cond, &qemu_global_mutex);
}
- tcg_cpu_thread = cpu->thread;
} else {
- cpu->thread = tcg_cpu_thread;
- cpu->halt_cond = tcg_halt_cond;
+ /* For non-MTTCG cases we share the thread */
+ cpu->thread = single_tcg_cpu_thread;
+ cpu->halt_cond = single_tcg_halt_cond;
}
}
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* [Qemu-devel] [PATCH v7 12/27] tcg: handle EXCP_ATOMIC exception for system emulation
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (10 preceding siblings ...)
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 11/27] tcg: enable thread-per-vCPU Alex Bennée
@ 2017-01-19 17:04 ` Alex Bennée
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 13/27] cputlb: add assert_cpu_is_self checks Alex Bennée
` (14 subsequent siblings)
26 siblings, 0 replies; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:04 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, Peter Crosthwaite
From: Pranith Kumar <bobby.prani@gmail.com>
The patch enables handling atomic code in the guest. This should be
preferably done in cpu_handle_exception(), but the current assumptions
regarding when we can execute atomic sections cause a deadlock.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
[AJB: tweak title]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
---
cpus.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/cpus.c b/cpus.c
index 32e9ff4b34..4a66c88ebe 100644
--- a/cpus.c
+++ b/cpus.c
@@ -1343,6 +1343,11 @@ static void *qemu_tcg_rr_cpu_thread_fn(void *arg)
if (r == EXCP_DEBUG) {
cpu_handle_guest_debug(cpu);
break;
+ } else if (r == EXCP_ATOMIC) {
+ qemu_mutex_unlock_iothread();
+ cpu_exec_step_atomic(cpu);
+ qemu_mutex_lock_iothread();
+ break;
}
} else if (cpu->stop) {
if (cpu->unplug) {
@@ -1413,6 +1418,10 @@ static void *qemu_tcg_cpu_thread_fn(void *arg)
*/
g_assert(cpu->halted);
break;
+ case EXCP_ATOMIC:
+ qemu_mutex_unlock_iothread();
+ cpu_exec_step_atomic(cpu);
+ qemu_mutex_lock_iothread();
default:
/* Ignore everything else? */
break;
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* [Qemu-devel] [PATCH v7 13/27] cputlb: add assert_cpu_is_self checks
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (11 preceding siblings ...)
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 12/27] tcg: handle EXCP_ATOMIC exception for system emulation Alex Bennée
@ 2017-01-19 17:04 ` Alex Bennée
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 14/27] cputlb: tweak qemu_ram_addr_from_host_nofail reporting Alex Bennée
` (13 subsequent siblings)
26 siblings, 0 replies; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:04 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, Peter Crosthwaite
For SoftMMU the TLB flushes are an example of a task that can be
triggered on one vCPU by another. To deal with this properly we need to
use safe work to ensure these changes are done safely. The new assert
can be enabled while debugging to catch these cases.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
---
cputlb.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/cputlb.c b/cputlb.c
index 1cc9d9da51..af0e65cd2c 100644
--- a/cputlb.c
+++ b/cputlb.c
@@ -58,6 +58,12 @@
} \
} while (0)
+#define assert_cpu_is_self(this_cpu) do { \
+ if (DEBUG_TLB_GATE) { \
+ g_assert(!cpu->created || qemu_cpu_is_self(cpu)); \
+ } \
+ } while (0)
+
/* statistics */
int tlb_flush_count;
@@ -70,6 +76,9 @@ void tlb_flush(CPUState *cpu)
{
CPUArchState *env = cpu->env_ptr;
+ assert_cpu_is_self(cpu);
+ tlb_debug("(count: %d)\n", tlb_flush_count++);
+
memset(env->tlb_table, -1, sizeof(env->tlb_table));
memset(env->tlb_v_table, -1, sizeof(env->tlb_v_table));
memset(cpu->tb_jmp_cache, 0, sizeof(cpu->tb_jmp_cache));
@@ -77,13 +86,13 @@ void tlb_flush(CPUState *cpu)
env->vtlb_index = 0;
env->tlb_flush_addr = -1;
env->tlb_flush_mask = 0;
- tlb_flush_count++;
}
static inline void v_tlb_flush_by_mmuidx(CPUState *cpu, va_list argp)
{
CPUArchState *env = cpu->env_ptr;
+ assert_cpu_is_self(cpu);
tlb_debug("start\n");
for (;;) {
@@ -128,6 +137,7 @@ void tlb_flush_page(CPUState *cpu, target_ulong addr)
int i;
int mmu_idx;
+ assert_cpu_is_self(cpu);
tlb_debug("page :" TARGET_FMT_lx "\n", addr);
/* Check if we need to flush due to large pages. */
@@ -165,6 +175,7 @@ void tlb_flush_page_by_mmuidx(CPUState *cpu, target_ulong addr, ...)
va_start(argp, addr);
+ assert_cpu_is_self(cpu);
tlb_debug("addr "TARGET_FMT_lx"\n", addr);
/* Check if we need to flush due to large pages. */
@@ -253,6 +264,8 @@ void tlb_reset_dirty(CPUState *cpu, ram_addr_t start1, ram_addr_t length)
int mmu_idx;
+ assert_cpu_is_self(cpu);
+
env = cpu->env_ptr;
for (mmu_idx = 0; mmu_idx < NB_MMU_MODES; mmu_idx++) {
unsigned int i;
@@ -284,6 +297,8 @@ void tlb_set_dirty(CPUState *cpu, target_ulong vaddr)
int i;
int mmu_idx;
+ assert_cpu_is_self(cpu);
+
vaddr &= TARGET_PAGE_MASK;
i = (vaddr >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1);
for (mmu_idx = 0; mmu_idx < NB_MMU_MODES; mmu_idx++) {
@@ -343,6 +358,7 @@ void tlb_set_page_with_attrs(CPUState *cpu, target_ulong vaddr,
unsigned vidx = env->vtlb_index++ % CPU_VTLB_SIZE;
int asidx = cpu_asidx_from_attrs(cpu, attrs);
+ assert_cpu_is_self(cpu);
assert(size >= TARGET_PAGE_SIZE);
if (size != TARGET_PAGE_SIZE) {
tlb_add_large_page(env, vaddr, size);
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* [Qemu-devel] [PATCH v7 14/27] cputlb: tweak qemu_ram_addr_from_host_nofail reporting
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (12 preceding siblings ...)
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 13/27] cputlb: add assert_cpu_is_self checks Alex Bennée
@ 2017-01-19 17:04 ` Alex Bennée
2017-01-23 19:07 ` Richard Henderson
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 15/27] cputlb: introduce tlb_flush_* async work Alex Bennée
` (12 subsequent siblings)
26 siblings, 1 reply; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:04 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, Peter Crosthwaite
This moves the helper function closer to where it is called and updates
the error message to report via error_report instead of the deprecated
fprintf.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
cputlb.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/cputlb.c b/cputlb.c
index af0e65cd2c..94fa9977c5 100644
--- a/cputlb.c
+++ b/cputlb.c
@@ -246,18 +246,6 @@ void tlb_reset_dirty_range(CPUTLBEntry *tlb_entry, uintptr_t start,
}
}
-static inline ram_addr_t qemu_ram_addr_from_host_nofail(void *ptr)
-{
- ram_addr_t ram_addr;
-
- ram_addr = qemu_ram_addr_from_host(ptr);
- if (ram_addr == RAM_ADDR_INVALID) {
- fprintf(stderr, "Bad ram pointer %p\n", ptr);
- abort();
- }
- return ram_addr;
-}
-
void tlb_reset_dirty(CPUState *cpu, ram_addr_t start1, ram_addr_t length)
{
CPUArchState *env;
@@ -469,6 +457,18 @@ static void report_bad_exec(CPUState *cpu, target_ulong addr)
log_cpu_state_mask(LOG_GUEST_ERROR, cpu, CPU_DUMP_FPU | CPU_DUMP_CCOP);
}
+static inline ram_addr_t qemu_ram_addr_from_host_nofail(void *ptr)
+{
+ ram_addr_t ram_addr;
+
+ ram_addr = qemu_ram_addr_from_host(ptr);
+ if (ram_addr == RAM_ADDR_INVALID) {
+ error_report("Bad ram pointer %p", ptr);
+ abort();
+ }
+ return ram_addr;
+}
+
/* NOTE: this function can trigger an exception */
/* NOTE2: the returned address is not exactly the physical address: it
* is actually a ram_addr_t (in system mode; the user mode emulation
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* Re: [Qemu-devel] [PATCH v7 14/27] cputlb: tweak qemu_ram_addr_from_host_nofail reporting
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 14/27] cputlb: tweak qemu_ram_addr_from_host_nofail reporting Alex Bennée
@ 2017-01-23 19:07 ` Richard Henderson
0 siblings, 0 replies; 51+ messages in thread
From: Richard Henderson @ 2017-01-23 19:07 UTC (permalink / raw)
To: Alex Bennée, mttcg, qemu-devel, fred.konrad, a.rigo, cota,
bobby.prani, nikunj
Cc: peter.maydell, claudio.fontana, Peter Crosthwaite, jan.kiszka,
mark.burton, serge.fdrv, pbonzini, bamvor.zhangjian
On 01/19/2017 09:04 AM, Alex Bennée wrote:
> This moves the helper function closer to where it is called and updates
> the error message to report via error_report instead of the deprecated
> fprintf.
>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> cputlb.c | 24 ++++++++++++------------
> 1 file changed, 12 insertions(+), 12 deletions(-)
Reviewed-by: Richard Henderson <rth@twiddle.net>
r~
^ permalink raw reply [flat|nested] 51+ messages in thread
* [Qemu-devel] [PATCH v7 15/27] cputlb: introduce tlb_flush_* async work.
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (13 preceding siblings ...)
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 14/27] cputlb: tweak qemu_ram_addr_from_host_nofail reporting Alex Bennée
@ 2017-01-19 17:04 ` Alex Bennée
2017-01-23 19:10 ` Richard Henderson
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 16/27] cputlb: add tlb_flush_by_mmuidx async routines Alex Bennée
` (11 subsequent siblings)
26 siblings, 1 reply; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:04 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, Peter Crosthwaite
From: KONRAD Frederic <fred.konrad@greensocs.com>
Some architectures allow to flush the tlb of other VCPUs. This is not a problem
when we have only one thread for all VCPUs but it definitely needs to be an
asynchronous work when we are in true multithreaded work.
We take the tb_lock() when doing this to avoid racing with other threads
which may be invalidating TB's at the same time. The alternative would
be to use proper atomic primitives to clear the tlb entries en-mass.
This patch doesn't do anything to protect other cputlb function being
called in MTTCG mode making cross vCPU changes.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[AJB: remove need for g_malloc on defer, make check fixes, tb_lock]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
v6 (base patches)
- don't use cmpxchg_bool (we drop it later anyway)
- use RUN_ON_CPU macros instead of inlines
- bug out of tlb_flush if !tcg_enabled() (MacOSX make check failure)
v5 (base patches)
- take tb_lock() for memset
- ensure tb_flush_page properly asyncs work for other vCPUs
- use run_on_cpu_data
v4 (base_patches)
- brought forward from arm enabling series
- restore pending_tlb_flush flag
v1
- Remove tlb_flush_all just do the check in tlb_flush.
- remove the need to g_malloc
- tlb_flush calls direct if !cpu->created
fixup! cputlb: introduce tlb_flush_* async work.
---
cputlb.c | 78 +++++++++++++++++++++++++++++++++++++++++++++++--
include/exec/exec-all.h | 1 +
include/qom/cpu.h | 6 ++++
3 files changed, 83 insertions(+), 2 deletions(-)
diff --git a/cputlb.c b/cputlb.c
index 94fa9977c5..36388b29b8 100644
--- a/cputlb.c
+++ b/cputlb.c
@@ -64,6 +64,10 @@
} \
} while (0)
+/* run_on_cpu_data.target_ptr should always be big enough for a
+ * target_ulong even on 32 bit builds */
+QEMU_BUILD_BUG_ON(sizeof(target_ulong) > sizeof(run_on_cpu_data));
+
/* statistics */
int tlb_flush_count;
@@ -72,13 +76,22 @@ int tlb_flush_count;
* flushing more entries than required is only an efficiency issue,
* not a correctness issue.
*/
-void tlb_flush(CPUState *cpu)
+static void tlb_flush_nocheck(CPUState *cpu)
{
CPUArchState *env = cpu->env_ptr;
+ /* The QOM tests will trigger tlb_flushes without setting up TCG
+ * so we bug out here in that case.
+ */
+ if (!tcg_enabled()) {
+ return;
+ }
+
assert_cpu_is_self(cpu);
tlb_debug("(count: %d)\n", tlb_flush_count++);
+ tb_lock();
+
memset(env->tlb_table, -1, sizeof(env->tlb_table));
memset(env->tlb_v_table, -1, sizeof(env->tlb_v_table));
memset(cpu->tb_jmp_cache, 0, sizeof(cpu->tb_jmp_cache));
@@ -86,6 +99,39 @@ void tlb_flush(CPUState *cpu)
env->vtlb_index = 0;
env->tlb_flush_addr = -1;
env->tlb_flush_mask = 0;
+
+ tb_unlock();
+
+ atomic_mb_set(&cpu->pending_tlb_flush, false);
+}
+
+static void tlb_flush_global_async_work(CPUState *cpu, run_on_cpu_data data)
+{
+ tlb_flush_nocheck(cpu);
+}
+
+/* NOTE:
+ * If flush_global is true (the usual case), flush all tlb entries.
+ * If flush_global is false, flush (at least) all tlb entries not
+ * marked global.
+ *
+ * Since QEMU doesn't currently implement a global/not-global flag
+ * for tlb entries, at the moment tlb_flush() will also flush all
+ * tlb entries in the flush_global == false case. This is OK because
+ * CPU architectures generally permit an implementation to drop
+ * entries from the TLB at any time, so flushing more entries than
+ * required is only an efficiency issue, not a correctness issue.
+ */
+void tlb_flush(CPUState *cpu)
+{
+ if (cpu->created && !qemu_cpu_is_self(cpu)) {
+ if (atomic_cmpxchg(&cpu->pending_tlb_flush, false, true) == true) {
+ async_run_on_cpu(cpu, tlb_flush_global_async_work,
+ RUN_ON_CPU_NULL);
+ }
+ } else {
+ tlb_flush_nocheck(cpu);
+ }
}
static inline void v_tlb_flush_by_mmuidx(CPUState *cpu, va_list argp)
@@ -95,6 +141,8 @@ static inline void v_tlb_flush_by_mmuidx(CPUState *cpu, va_list argp)
assert_cpu_is_self(cpu);
tlb_debug("start\n");
+ tb_lock();
+
for (;;) {
int mmu_idx = va_arg(argp, int);
@@ -109,6 +157,8 @@ static inline void v_tlb_flush_by_mmuidx(CPUState *cpu, va_list argp)
}
memset(cpu->tb_jmp_cache, 0, sizeof(cpu->tb_jmp_cache));
+
+ tb_unlock();
}
void tlb_flush_by_mmuidx(CPUState *cpu, ...)
@@ -131,13 +181,15 @@ static inline void tlb_flush_entry(CPUTLBEntry *tlb_entry, target_ulong addr)
}
}
-void tlb_flush_page(CPUState *cpu, target_ulong addr)
+static void tlb_flush_page_async_work(CPUState *cpu, run_on_cpu_data data)
{
CPUArchState *env = cpu->env_ptr;
+ target_ulong addr = (target_ulong) data.target_ptr;
int i;
int mmu_idx;
assert_cpu_is_self(cpu);
+
tlb_debug("page :" TARGET_FMT_lx "\n", addr);
/* Check if we need to flush due to large pages. */
@@ -167,6 +219,18 @@ void tlb_flush_page(CPUState *cpu, target_ulong addr)
tb_flush_jmp_cache(cpu, addr);
}
+void tlb_flush_page(CPUState *cpu, target_ulong addr)
+{
+ tlb_debug("page :" TARGET_FMT_lx "\n", addr);
+
+ if (!qemu_cpu_is_self(cpu)) {
+ async_run_on_cpu(cpu, tlb_flush_page_async_work,
+ RUN_ON_CPU_TARGET_PTR(addr));
+ } else {
+ tlb_flush_page_async_work(cpu, RUN_ON_CPU_TARGET_PTR(addr));
+ }
+}
+
void tlb_flush_page_by_mmuidx(CPUState *cpu, target_ulong addr, ...)
{
CPUArchState *env = cpu->env_ptr;
@@ -213,6 +277,16 @@ void tlb_flush_page_by_mmuidx(CPUState *cpu, target_ulong addr, ...)
tb_flush_jmp_cache(cpu, addr);
}
+void tlb_flush_page_all(target_ulong addr)
+{
+ CPUState *cpu;
+
+ CPU_FOREACH(cpu) {
+ async_run_on_cpu(cpu, tlb_flush_page_async_work,
+ RUN_ON_CPU_TARGET_PTR(addr));
+ }
+}
+
/* update the TLBs so that writes to code in the virtual page 'addr'
can be detected */
void tlb_protect_code(ram_addr_t ram_addr)
diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h
index bd4622ac5d..e43cb68355 100644
--- a/include/exec/exec-all.h
+++ b/include/exec/exec-all.h
@@ -158,6 +158,7 @@ void tlb_set_page(CPUState *cpu, target_ulong vaddr,
void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr);
void probe_write(CPUArchState *env, target_ulong addr, int mmu_idx,
uintptr_t retaddr);
+void tlb_flush_page_all(target_ulong addr);
#else
static inline void tlb_flush_page(CPUState *cpu, target_ulong addr)
{
diff --git a/include/qom/cpu.h b/include/qom/cpu.h
index 1735374ad6..880ba4254e 100644
--- a/include/qom/cpu.h
+++ b/include/qom/cpu.h
@@ -393,6 +393,12 @@ struct CPUState {
(absolute value) offset as small as possible. This reduces code
size, especially for hosts without large memory offsets. */
uint32_t tcg_exit_req;
+
+ /* The pending_tlb_flush flag is set and cleared atomically to
+ * avoid potential races. The aim of the flag is to avoid
+ * unnecessary flushes.
+ */
+ bool pending_tlb_flush;
};
QTAILQ_HEAD(CPUTailQ, CPUState);
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* Re: [Qemu-devel] [PATCH v7 15/27] cputlb: introduce tlb_flush_* async work.
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 15/27] cputlb: introduce tlb_flush_* async work Alex Bennée
@ 2017-01-23 19:10 ` Richard Henderson
0 siblings, 0 replies; 51+ messages in thread
From: Richard Henderson @ 2017-01-23 19:10 UTC (permalink / raw)
To: Alex Bennée, mttcg, qemu-devel, fred.konrad, a.rigo, cota,
bobby.prani, nikunj
Cc: peter.maydell, claudio.fontana, Peter Crosthwaite, jan.kiszka,
mark.burton, serge.fdrv, pbonzini, bamvor.zhangjian
On 01/19/2017 09:04 AM, Alex Bennée wrote:
> +/* NOTE:
> + * If flush_global is true (the usual case), flush all tlb entries.
> + * If flush_global is false, flush (at least) all tlb entries not
> + * marked global.
> + *
> + * Since QEMU doesn't currently implement a global/not-global flag
> + * for tlb entries, at the moment tlb_flush() will also flush all
> + * tlb entries in the flush_global == false case. This is OK because
> + * CPU architectures generally permit an implementation to drop
> + * entries from the TLB at any time, so flushing more entries than
> + * required is only an efficiency issue, not a correctness issue.
> + */
> +void tlb_flush(CPUState *cpu)
> +{
Merge error re-adding the comment for flush_global?
Otherwise,
Reviewed-by: Richard Henderson <rth@twiddle.net>
r~
^ permalink raw reply [flat|nested] 51+ messages in thread
* [Qemu-devel] [PATCH v7 16/27] cputlb: add tlb_flush_by_mmuidx async routines
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (14 preceding siblings ...)
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 15/27] cputlb: introduce tlb_flush_* async work Alex Bennée
@ 2017-01-19 17:04 ` Alex Bennée
2017-01-23 19:11 ` Richard Henderson
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 17/27] cputlb: atomically update tlb fields used by tlb_reset_dirty Alex Bennée
` (10 subsequent siblings)
26 siblings, 1 reply; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:04 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, Peter Crosthwaite
This converts the remaining TLB flush routines to use async work when
detecting a cross-vCPU flush. The only minor complication is having to
serialise the var_list of MMU indexes into a form that can be punted
to an asynchronous job.
The pending_tlb_flush field on QOM's CPU structure also becomes a
bitfield rather than a boolean.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
v7
- un-merged from the atomic cputlb patch in the last series
- fix long line reported by checkpatch
---
cputlb.c | 160 +++++++++++++++++++++++++++++++++++++++++-------------
include/qom/cpu.h | 12 ++--
2 files changed, 127 insertions(+), 45 deletions(-)
diff --git a/cputlb.c b/cputlb.c
index 36388b29b8..207faf2ea0 100644
--- a/cputlb.c
+++ b/cputlb.c
@@ -68,6 +68,11 @@
* target_ulong even on 32 bit builds */
QEMU_BUILD_BUG_ON(sizeof(target_ulong) > sizeof(run_on_cpu_data));
+/* We currently can't handle more than 16 bits in the MMUIDX bitmask.
+ */
+QEMU_BUILD_BUG_ON(NB_MMU_MODES > 16);
+#define ALL_MMUIDX_BITS ((1 << NB_MMU_MODES) - 1)
+
/* statistics */
int tlb_flush_count;
@@ -102,7 +107,7 @@ static void tlb_flush_nocheck(CPUState *cpu)
tb_unlock();
- atomic_mb_set(&cpu->pending_tlb_flush, false);
+ atomic_mb_set(&cpu->pending_tlb_flush, 0);
}
static void tlb_flush_global_async_work(CPUState *cpu, run_on_cpu_data data)
@@ -125,7 +130,8 @@ static void tlb_flush_global_async_work(CPUState *cpu, run_on_cpu_data data)
void tlb_flush(CPUState *cpu)
{
if (cpu->created && !qemu_cpu_is_self(cpu)) {
- if (atomic_cmpxchg(&cpu->pending_tlb_flush, false, true) == true) {
+ if (atomic_mb_read(&cpu->pending_tlb_flush) != ALL_MMUIDX_BITS) {
+ atomic_mb_set(&cpu->pending_tlb_flush, ALL_MMUIDX_BITS);
async_run_on_cpu(cpu, tlb_flush_global_async_work,
RUN_ON_CPU_NULL);
}
@@ -134,39 +140,78 @@ void tlb_flush(CPUState *cpu)
}
}
-static inline void v_tlb_flush_by_mmuidx(CPUState *cpu, va_list argp)
+static void tlb_flush_by_mmuidx_async_work(CPUState *cpu, run_on_cpu_data data)
{
CPUArchState *env = cpu->env_ptr;
+ unsigned long mmu_idx_bitmask = data.host_ulong;
+ int mmu_idx;
assert_cpu_is_self(cpu);
- tlb_debug("start\n");
tb_lock();
- for (;;) {
- int mmu_idx = va_arg(argp, int);
+ tlb_debug("start: mmu_idx:0x%04lx\n", mmu_idx_bitmask);
- if (mmu_idx < 0) {
- break;
- }
+ for (mmu_idx = 0; mmu_idx < NB_MMU_MODES; mmu_idx++) {
- tlb_debug("%d\n", mmu_idx);
+ if (test_bit(mmu_idx, &mmu_idx_bitmask)) {
+ tlb_debug("%d\n", mmu_idx);
- memset(env->tlb_table[mmu_idx], -1, sizeof(env->tlb_table[0]));
- memset(env->tlb_v_table[mmu_idx], -1, sizeof(env->tlb_v_table[0]));
+ memset(env->tlb_table[mmu_idx], -1, sizeof(env->tlb_table[0]));
+ memset(env->tlb_v_table[mmu_idx], -1, sizeof(env->tlb_v_table[0]));
+ }
}
memset(cpu->tb_jmp_cache, 0, sizeof(cpu->tb_jmp_cache));
+ tlb_debug("done\n");
+
tb_unlock();
}
+/* Helper function to slurp va_args list into a bitmap
+ */
+static inline unsigned long make_mmu_index_bitmap(va_list args)
+{
+ unsigned long bitmap = 0;
+ int mmu_index = va_arg(args, int);
+
+ /* An empty va_list would be a bad call */
+ g_assert(mmu_index > 0);
+
+ do {
+ set_bit(mmu_index, &bitmap);
+ mmu_index = va_arg(args, int);
+ } while (mmu_index >= 0);
+
+ return bitmap;
+}
+
void tlb_flush_by_mmuidx(CPUState *cpu, ...)
{
va_list argp;
+ unsigned long mmu_idx_bitmap;
+
va_start(argp, cpu);
- v_tlb_flush_by_mmuidx(cpu, argp);
+ mmu_idx_bitmap = make_mmu_index_bitmap(argp);
va_end(argp);
+
+ tlb_debug("mmu_idx: 0x%04lx\n", mmu_idx_bitmap);
+
+ if (!qemu_cpu_is_self(cpu)) {
+ uint16_t pending_flushes =
+ mmu_idx_bitmap & ~atomic_mb_read(&cpu->pending_tlb_flush);
+ if (pending_flushes) {
+ tlb_debug("reduced mmu_idx: 0x%" PRIx16 "\n", pending_flushes);
+
+ atomic_or(&cpu->pending_tlb_flush, pending_flushes);
+ async_run_on_cpu(cpu, tlb_flush_by_mmuidx_async_work,
+ RUN_ON_CPU_HOST_INT(pending_flushes));
+ }
+ } else {
+ tlb_flush_by_mmuidx_async_work(cpu,
+ RUN_ON_CPU_HOST_ULONG(mmu_idx_bitmap));
+ }
}
static inline void tlb_flush_entry(CPUTLBEntry *tlb_entry, target_ulong addr)
@@ -231,16 +276,50 @@ void tlb_flush_page(CPUState *cpu, target_ulong addr)
}
}
-void tlb_flush_page_by_mmuidx(CPUState *cpu, target_ulong addr, ...)
+/* As we are going to hijack the bottom bits of the page address for a
+ * mmuidx bit mask we need to fail to build if we can't do that
+ */
+QEMU_BUILD_BUG_ON(NB_MMU_MODES > TARGET_PAGE_BITS_MIN);
+
+static void tlb_flush_page_by_mmuidx_async_work(CPUState *cpu,
+ run_on_cpu_data data)
{
CPUArchState *env = cpu->env_ptr;
- int i, k;
- va_list argp;
-
- va_start(argp, addr);
+ target_ulong addr_and_mmuidx = (target_ulong) data.target_ptr;
+ target_ulong addr = addr_and_mmuidx & TARGET_PAGE_MASK;
+ unsigned long mmu_idx_bitmap = addr_and_mmuidx & ALL_MMUIDX_BITS;
+ int page = (addr >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1);
+ int mmu_idx;
+ int i;
assert_cpu_is_self(cpu);
- tlb_debug("addr "TARGET_FMT_lx"\n", addr);
+
+ tlb_debug("page:%d addr:"TARGET_FMT_lx" mmu_idx:0x%lx\n",
+ page, addr, mmu_idx_bitmap);
+
+ for (mmu_idx = 0; mmu_idx < NB_MMU_MODES; mmu_idx++) {
+ if (test_bit(mmu_idx, &mmu_idx_bitmap)) {
+ tlb_flush_entry(&env->tlb_table[mmu_idx][page], addr);
+
+ /* check whether there are vltb entries that need to be flushed */
+ for (i = 0; i < CPU_VTLB_SIZE; i++) {
+ tlb_flush_entry(&env->tlb_v_table[mmu_idx][i], addr);
+ }
+ }
+ }
+
+ tb_flush_jmp_cache(cpu, addr);
+}
+
+static void tlb_check_page_and_flush_by_mmuidx_async_work(CPUState *cpu,
+ run_on_cpu_data data)
+{
+ CPUArchState *env = cpu->env_ptr;
+ target_ulong addr_and_mmuidx = (target_ulong) data.target_ptr;
+ target_ulong addr = addr_and_mmuidx & TARGET_PAGE_MASK;
+ unsigned long mmu_idx_bitmap = addr_and_mmuidx & ALL_MMUIDX_BITS;
+
+ tlb_debug("addr:"TARGET_FMT_lx" mmu_idx: %04lx\n", addr, mmu_idx_bitmap);
/* Check if we need to flush due to large pages. */
if ((addr & env->tlb_flush_mask) == env->tlb_flush_addr) {
@@ -248,33 +327,36 @@ void tlb_flush_page_by_mmuidx(CPUState *cpu, target_ulong addr, ...)
TARGET_FMT_lx "/" TARGET_FMT_lx ")\n",
env->tlb_flush_addr, env->tlb_flush_mask);
- v_tlb_flush_by_mmuidx(cpu, argp);
- va_end(argp);
- return;
+ tlb_flush_by_mmuidx_async_work(cpu,
+ RUN_ON_CPU_HOST_ULONG(mmu_idx_bitmap));
+ } else {
+ tlb_flush_page_by_mmuidx_async_work(cpu, data);
}
+}
- addr &= TARGET_PAGE_MASK;
- i = (addr >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1);
-
- for (;;) {
- int mmu_idx = va_arg(argp, int);
+void tlb_flush_page_by_mmuidx(CPUState *cpu, target_ulong addr, ...)
+{
+ unsigned long mmu_idx_bitmap;
+ target_ulong addr_and_mmu_idx;
+ va_list argp;
- if (mmu_idx < 0) {
- break;
- }
+ va_start(argp, addr);
+ mmu_idx_bitmap = make_mmu_index_bitmap(argp);
+ va_end(argp);
- tlb_debug("idx %d\n", mmu_idx);
+ tlb_debug("addr: "TARGET_FMT_lx" mmu_idx:%lx\n", addr, mmu_idx_bitmap);
- tlb_flush_entry(&env->tlb_table[mmu_idx][i], addr);
+ /* This should already be page aligned */
+ addr_and_mmu_idx = addr & TARGET_PAGE_MASK;
+ addr_and_mmu_idx |= mmu_idx_bitmap;
- /* check whether there are vltb entries that need to be flushed */
- for (k = 0; k < CPU_VTLB_SIZE; k++) {
- tlb_flush_entry(&env->tlb_v_table[mmu_idx][k], addr);
- }
+ if (!qemu_cpu_is_self(cpu)) {
+ async_run_on_cpu(cpu, tlb_check_page_and_flush_by_mmuidx_async_work,
+ RUN_ON_CPU_TARGET_PTR(addr_and_mmu_idx));
+ } else {
+ tlb_check_page_and_flush_by_mmuidx_async_work(
+ cpu, RUN_ON_CPU_TARGET_PTR(addr_and_mmu_idx));
}
- va_end(argp);
-
- tb_flush_jmp_cache(cpu, addr);
}
void tlb_flush_page_all(target_ulong addr)
diff --git a/include/qom/cpu.h b/include/qom/cpu.h
index 880ba4254e..d945221811 100644
--- a/include/qom/cpu.h
+++ b/include/qom/cpu.h
@@ -388,17 +388,17 @@ struct CPUState {
*/
bool throttle_thread_scheduled;
+ /* The pending_tlb_flush flag is set and cleared atomically to
+ * avoid potential races. The aim of the flag is to avoid
+ * unnecessary flushes.
+ */
+ uint16_t pending_tlb_flush;
+
/* Note that this is accessed at the start of every TB via a negative
offset from AREG0. Leave this field at the end so as to make the
(absolute value) offset as small as possible. This reduces code
size, especially for hosts without large memory offsets. */
uint32_t tcg_exit_req;
-
- /* The pending_tlb_flush flag is set and cleared atomically to
- * avoid potential races. The aim of the flag is to avoid
- * unnecessary flushes.
- */
- bool pending_tlb_flush;
};
QTAILQ_HEAD(CPUTailQ, CPUState);
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* Re: [Qemu-devel] [PATCH v7 16/27] cputlb: add tlb_flush_by_mmuidx async routines
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 16/27] cputlb: add tlb_flush_by_mmuidx async routines Alex Bennée
@ 2017-01-23 19:11 ` Richard Henderson
2017-01-24 20:31 ` Alex Bennée
0 siblings, 1 reply; 51+ messages in thread
From: Richard Henderson @ 2017-01-23 19:11 UTC (permalink / raw)
To: Alex Bennée, mttcg, qemu-devel, fred.konrad, a.rigo, cota,
bobby.prani, nikunj
Cc: peter.maydell, claudio.fontana, Peter Crosthwaite, jan.kiszka,
mark.burton, serge.fdrv, pbonzini, bamvor.zhangjian
On 01/19/2017 09:04 AM, Alex Bennée wrote:
> +/* Helper function to slurp va_args list into a bitmap
> + */
> +static inline unsigned long make_mmu_index_bitmap(va_list args)
> +{
> + unsigned long bitmap = 0;
> + int mmu_index = va_arg(args, int);
> +
> + /* An empty va_list would be a bad call */
> + g_assert(mmu_index > 0);
> +
> + do {
> + set_bit(mmu_index, &bitmap);
> + mmu_index = va_arg(args, int);
> + } while (mmu_index >= 0);
> +
> + return bitmap;
> +}
> +
Why don't we just pass in this bitmap in the first place? It's much better
than having to use varargs in tlb_flush_by_mmuidx...
r~
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: [Qemu-devel] [PATCH v7 16/27] cputlb: add tlb_flush_by_mmuidx async routines
2017-01-23 19:11 ` Richard Henderson
@ 2017-01-24 20:31 ` Alex Bennée
2017-01-24 20:44 ` Richard Henderson
0 siblings, 1 reply; 51+ messages in thread
From: Alex Bennée @ 2017-01-24 20:31 UTC (permalink / raw)
To: Richard Henderson
Cc: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani,
nikunj, peter.maydell, claudio.fontana, Peter Crosthwaite,
jan.kiszka, mark.burton, serge.fdrv, pbonzini, bamvor.zhangjian
Richard Henderson <rth@twiddle.net> writes:
> On 01/19/2017 09:04 AM, Alex Bennée wrote:
>> +/* Helper function to slurp va_args list into a bitmap
>> + */
>> +static inline unsigned long make_mmu_index_bitmap(va_list args)
>> +{
>> + unsigned long bitmap = 0;
>> + int mmu_index = va_arg(args, int);
>> +
>> + /* An empty va_list would be a bad call */
>> + g_assert(mmu_index > 0);
>> +
>> + do {
>> + set_bit(mmu_index, &bitmap);
>> + mmu_index = va_arg(args, int);
>> + } while (mmu_index >= 0);
>> +
>> + return bitmap;
>> +}
>> +
>
> Why don't we just pass in this bitmap in the first place? It's much better
> than having to use varargs in tlb_flush_by_mmuidx...
We could. By not messing with the API it leaves the door open to having
other non-MTTCG architectures that have lots of MMU indexes versus a
hard limit based on page-size. That said I think the number of indexes
also affects the size of the TLB so I guess the current design is
limited for arbitrarily large sets if indexes?
Is ARM is the current outlier for this functionality? Apart from SPARC's
two uses are we likely to see more architectures using this?
--
Alex Bennée
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: [Qemu-devel] [PATCH v7 16/27] cputlb: add tlb_flush_by_mmuidx async routines
2017-01-24 20:31 ` Alex Bennée
@ 2017-01-24 20:44 ` Richard Henderson
2017-01-25 14:09 ` Alex Bennée
0 siblings, 1 reply; 51+ messages in thread
From: Richard Henderson @ 2017-01-24 20:44 UTC (permalink / raw)
To: Alex Bennée
Cc: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani,
nikunj, peter.maydell, claudio.fontana, Peter Crosthwaite,
jan.kiszka, mark.burton, serge.fdrv, pbonzini, bamvor.zhangjian
On 01/24/2017 12:31 PM, Alex Bennée wrote:
>> Why don't we just pass in this bitmap in the first place? It's much better
>> than having to use varargs in tlb_flush_by_mmuidx...
>
> We could. By not messing with the API it leaves the door open to having
> other non-MTTCG architectures that have lots of MMU indexes versus a
> hard limit based on page-size. That said I think the number of indexes
> also affects the size of the TLB so I guess the current design is
> limited for arbitrarily large sets if indexes?
We hard-limit at 12 indices, though even that is arguably too high.
I hope we never see more than PPC's current 8.
> Is ARM is the current outlier for this functionality? Apart from SPARC's
> two uses are we likely to see more architectures using this?
In theory, Alpha could use it to avoid ever flushing MMU_PHYS_IDX. It appears
that there are a few others that could also avoid flushing a "mmu-disabled" index.
I suspect that PPC could make good use of it as well. That one's complicated
enough that it probably needs a good going over -- especially for the non-local
flushes.
r~
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [Qemu-devel] [PATCH v7 16/27] cputlb: add tlb_flush_by_mmuidx async routines
2017-01-24 20:44 ` Richard Henderson
@ 2017-01-25 14:09 ` Alex Bennée
0 siblings, 0 replies; 51+ messages in thread
From: Alex Bennée @ 2017-01-25 14:09 UTC (permalink / raw)
To: Richard Henderson
Cc: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani,
nikunj, peter.maydell, claudio.fontana, Peter Crosthwaite,
jan.kiszka, mark.burton, serge.fdrv, pbonzini, bamvor.zhangjian
Richard Henderson <rth@twiddle.net> writes:
> On 01/24/2017 12:31 PM, Alex Bennée wrote:
>>> Why don't we just pass in this bitmap in the first place? It's much better
>>> than having to use varargs in tlb_flush_by_mmuidx...
>>
>> We could. By not messing with the API it leaves the door open to having
>> other non-MTTCG architectures that have lots of MMU indexes versus a
>> hard limit based on page-size. That said I think the number of indexes
>> also affects the size of the TLB so I guess the current design is
>> limited for arbitrarily large sets if indexes?
>
> We hard-limit at 12 indices, though even that is arguably too high.
> I hope we never see more than PPC's current 8.
Hmm there is quite a lot of churn in the ARM code to move from an index
to a bitmap. It should be mostly mechanical but we'll see.
--
Alex Bennée
^ permalink raw reply [flat|nested] 51+ messages in thread
* [Qemu-devel] [PATCH v7 17/27] cputlb: atomically update tlb fields used by tlb_reset_dirty
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (15 preceding siblings ...)
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 16/27] cputlb: add tlb_flush_by_mmuidx async routines Alex Bennée
@ 2017-01-19 17:04 ` Alex Bennée
2017-01-23 19:17 ` Richard Henderson
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 18/27] cputlb: introduce tlb_flush_*_all_cpus Alex Bennée
` (9 subsequent siblings)
26 siblings, 1 reply; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:04 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, Peter Crosthwaite
The main use case for tlb_reset_dirty is to set the TLB_NOTDIRTY flags
in TLB entries to force the slow-path on writes. This is used to mark
page ranges containing code which has been translated so it can be
invalidated if written to. To do this safely we need to ensure the TLB
entries in question for all vCPUs are updated before we attempt to run
the code otherwise a race could be introduced.
To achieve this we atomically set the flag in tlb_reset_dirty_range and
take care when setting it when the TLB entry is filled.
On 32 bit systems attempting to emulate 64 bit guests we don't even
bother as we might not have the atomic primitives available. MTTCG is
disabled in this case and can't be forced on. The copy_tlb_helper
function helps keep the atomic semantics in one place to avoid
confusion.
The dirty helper function is made static as it isn't used outside of
cputlb.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
v6
- use TARGET_PAGE_BITS_MIN
- use run_on_cpu helpers
v7
- fix tlb_debug fmt for 32bit build
- un-merged the mmuidx async work which got mashed in last round
- introduced copy_tlb_helper function and made TCG_OVERSIZED_GUEST aware
---
cputlb.c | 120 +++++++++++++++++++++++++++++++++++++++-----------
include/exec/cputlb.h | 2 -
2 files changed, 95 insertions(+), 27 deletions(-)
diff --git a/cputlb.c b/cputlb.c
index 207faf2ea0..856213cbcb 100644
--- a/cputlb.c
+++ b/cputlb.c
@@ -384,32 +384,90 @@ void tlb_unprotect_code(ram_addr_t ram_addr)
cpu_physical_memory_set_dirty_flag(ram_addr, DIRTY_MEMORY_CODE);
}
-static bool tlb_is_dirty_ram(CPUTLBEntry *tlbe)
-{
- return (tlbe->addr_write & (TLB_INVALID_MASK|TLB_MMIO|TLB_NOTDIRTY)) == 0;
-}
-void tlb_reset_dirty_range(CPUTLBEntry *tlb_entry, uintptr_t start,
+/*
+ * Dirty write flag handling
+ *
+ * When the TCG code writes to a location it looks up the address in
+ * the TLB and uses that data to compute the final address. If any of
+ * the lower bits of the address are set then the slow path is forced.
+ * There are a number of reasons to do this but for normal RAM the
+ * most usual is detecting writes to code regions which may invalidate
+ * generated code.
+ *
+ * Because we want other vCPUs to respond to changes straight away we
+ * update the te->addr_write field atomically. If the TLB entry has
+ * been changed by the vCPU in the mean time we skip the update.
+ *
+ * As this function uses atomic accesses we also need to ensure
+ * updates to tlb_entries follow the same access rules. We don't need
+ * to worry about this for oversized guests as MTTCG is disabled for
+ * them.
+ */
+
+static void tlb_reset_dirty_range(CPUTLBEntry *tlb_entry, uintptr_t start,
uintptr_t length)
{
- uintptr_t addr;
+#if TCG_OVERSIZED_GUEST
+ uintptr_t addr = tlb_entry->addr_write;
- if (tlb_is_dirty_ram(tlb_entry)) {
- addr = (tlb_entry->addr_write & TARGET_PAGE_MASK) + tlb_entry->addend;
+ if ((addr & (TLB_INVALID_MASK | TLB_MMIO | TLB_NOTDIRTY)) == 0) {
+ addr &= TARGET_PAGE_MASK;
+ addr += tlb_entry->addend;
if ((addr - start) < length) {
tlb_entry->addr_write |= TLB_NOTDIRTY;
}
}
+#else
+ /* paired with atomic_mb_set in tlb_set_page_with_attrs */
+ uintptr_t orig_addr = atomic_mb_read(&tlb_entry->addr_write);
+ uintptr_t addr = orig_addr;
+
+ if ((addr & (TLB_INVALID_MASK | TLB_MMIO | TLB_NOTDIRTY)) == 0) {
+ addr &= TARGET_PAGE_MASK;
+ addr += atomic_read(&tlb_entry->addend);
+ if ((addr - start) < length) {
+ uintptr_t notdirty_addr = orig_addr | TLB_NOTDIRTY;
+ atomic_cmpxchg(&tlb_entry->addr_write, orig_addr, notdirty_addr);
+ }
+ }
+#endif
+}
+
+/* For atomic correctness when running MTTCG we need to use the right
+ * primitives when copying entries */
+static inline void copy_tlb_helper(CPUTLBEntry *d, CPUTLBEntry *s,
+ bool atomic_set)
+{
+#if TCG_OVERSIZED_GUEST
+ *d = *s;
+#else
+ if (atomic_set) {
+ d->addr_read = s->addr_read;
+ d->addr_code = s->addr_code;
+ atomic_set(&d->addend, atomic_read(&s->addend));
+ /* Pairs with flag setting in tlb_reset_dirty_range */
+ atomic_mb_set(&d->addr_write, atomic_read(&s->addr_write));
+ } else {
+ d->addr_read = s->addr_read;
+ d->addr_write = atomic_read(&s->addr_write);
+ d->addr_code = s->addr_code;
+ d->addend = atomic_read(&s->addend);
+ }
+#endif
}
+/* This is a cross vCPU call (i.e. another vCPU resetting the flags of
+ * the target vCPU). As such care needs to be taken that we don't
+ * dangerously race with another vCPU update. The only thing actually
+ * updated is the target TLB entry ->addr_write flags.
+ */
void tlb_reset_dirty(CPUState *cpu, ram_addr_t start1, ram_addr_t length)
{
CPUArchState *env;
int mmu_idx;
- assert_cpu_is_self(cpu);
-
env = cpu->env_ptr;
for (mmu_idx = 0; mmu_idx < NB_MMU_MODES; mmu_idx++) {
unsigned int i;
@@ -497,7 +555,7 @@ void tlb_set_page_with_attrs(CPUState *cpu, target_ulong vaddr,
target_ulong address;
target_ulong code_address;
uintptr_t addend;
- CPUTLBEntry *te;
+ CPUTLBEntry *te, *tv, tn;
hwaddr iotlb, xlat, sz;
unsigned vidx = env->vtlb_index++ % CPU_VTLB_SIZE;
int asidx = cpu_asidx_from_attrs(cpu, attrs);
@@ -532,41 +590,50 @@ void tlb_set_page_with_attrs(CPUState *cpu, target_ulong vaddr,
index = (vaddr >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1);
te = &env->tlb_table[mmu_idx][index];
-
/* do not discard the translation in te, evict it into a victim tlb */
- env->tlb_v_table[mmu_idx][vidx] = *te;
+ tv = &env->tlb_v_table[mmu_idx][vidx];
+
+ /* addr_write can race with tlb_reset_dirty_range */
+ copy_tlb_helper(tv, te, true);
+
env->iotlb_v[mmu_idx][vidx] = env->iotlb[mmu_idx][index];
/* refill the tlb */
env->iotlb[mmu_idx][index].addr = iotlb - vaddr;
env->iotlb[mmu_idx][index].attrs = attrs;
- te->addend = addend - vaddr;
+
+ /* Now calculate the new entry */
+ tn.addend = addend - vaddr;
if (prot & PAGE_READ) {
- te->addr_read = address;
+ tn.addr_read = address;
} else {
- te->addr_read = -1;
+ tn.addr_read = -1;
}
if (prot & PAGE_EXEC) {
- te->addr_code = code_address;
+ tn.addr_code = code_address;
} else {
- te->addr_code = -1;
+ tn.addr_code = -1;
}
+
+ tn.addr_write = -1;
if (prot & PAGE_WRITE) {
if ((memory_region_is_ram(section->mr) && section->readonly)
|| memory_region_is_romd(section->mr)) {
/* Write access calls the I/O callback. */
- te->addr_write = address | TLB_MMIO;
+ tn.addr_write = address | TLB_MMIO;
} else if (memory_region_is_ram(section->mr)
&& cpu_physical_memory_is_clean(
memory_region_get_ram_addr(section->mr) + xlat)) {
- te->addr_write = address | TLB_NOTDIRTY;
+ tn.addr_write = address | TLB_NOTDIRTY;
} else {
- te->addr_write = address;
+ tn.addr_write = address;
}
- } else {
- te->addr_write = -1;
}
+
+ /* Pairs with flag setting in tlb_reset_dirty_range */
+ copy_tlb_helper(te, &tn, true);
+ /* atomic_mb_set(&te->addr_write, write_address); */
}
/* Add a new TLB entry, but without specifying the memory
@@ -729,10 +796,13 @@ static bool victim_tlb_hit(CPUArchState *env, size_t mmu_idx, size_t index,
if (cmp == page) {
/* Found entry in victim tlb, swap tlb and iotlb. */
CPUTLBEntry tmptlb, *tlb = &env->tlb_table[mmu_idx][index];
+
+ copy_tlb_helper(&tmptlb, tlb, false);
+ copy_tlb_helper(tlb, vtlb, true);
+ copy_tlb_helper(vtlb, &tmptlb, true);
+
CPUIOTLBEntry tmpio, *io = &env->iotlb[mmu_idx][index];
CPUIOTLBEntry *vio = &env->iotlb_v[mmu_idx][vidx];
-
- tmptlb = *tlb; *tlb = *vtlb; *vtlb = tmptlb;
tmpio = *io; *io = *vio; *vio = tmpio;
return true;
}
diff --git a/include/exec/cputlb.h b/include/exec/cputlb.h
index d454c005b7..3f941783c5 100644
--- a/include/exec/cputlb.h
+++ b/include/exec/cputlb.h
@@ -23,8 +23,6 @@
/* cputlb.c */
void tlb_protect_code(ram_addr_t ram_addr);
void tlb_unprotect_code(ram_addr_t ram_addr);
-void tlb_reset_dirty_range(CPUTLBEntry *tlb_entry, uintptr_t start,
- uintptr_t length);
extern int tlb_flush_count;
#endif
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* Re: [Qemu-devel] [PATCH v7 17/27] cputlb: atomically update tlb fields used by tlb_reset_dirty
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 17/27] cputlb: atomically update tlb fields used by tlb_reset_dirty Alex Bennée
@ 2017-01-23 19:17 ` Richard Henderson
0 siblings, 0 replies; 51+ messages in thread
From: Richard Henderson @ 2017-01-23 19:17 UTC (permalink / raw)
To: Alex Bennée, mttcg, qemu-devel, fred.konrad, a.rigo, cota,
bobby.prani, nikunj
Cc: peter.maydell, claudio.fontana, Peter Crosthwaite, jan.kiszka,
mark.burton, serge.fdrv, pbonzini, bamvor.zhangjian
On 01/19/2017 09:04 AM, Alex Bennée wrote:
> The main use case for tlb_reset_dirty is to set the TLB_NOTDIRTY flags
> in TLB entries to force the slow-path on writes. This is used to mark
> page ranges containing code which has been translated so it can be
> invalidated if written to. To do this safely we need to ensure the TLB
> entries in question for all vCPUs are updated before we attempt to run
> the code otherwise a race could be introduced.
>
> To achieve this we atomically set the flag in tlb_reset_dirty_range and
> take care when setting it when the TLB entry is filled.
>
> On 32 bit systems attempting to emulate 64 bit guests we don't even
> bother as we might not have the atomic primitives available. MTTCG is
> disabled in this case and can't be forced on. The copy_tlb_helper
> function helps keep the atomic semantics in one place to avoid
> confusion.
>
> The dirty helper function is made static as it isn't used outside of
> cputlb.
>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
r~
^ permalink raw reply [flat|nested] 51+ messages in thread
* [Qemu-devel] [PATCH v7 18/27] cputlb: introduce tlb_flush_*_all_cpus
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (16 preceding siblings ...)
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 17/27] cputlb: atomically update tlb fields used by tlb_reset_dirty Alex Bennée
@ 2017-01-19 17:04 ` Alex Bennée
2017-01-23 19:21 ` Richard Henderson
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 19/27] target-arm/powerctl: defer cpu reset work to CPU context Alex Bennée
` (8 subsequent siblings)
26 siblings, 1 reply; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:04 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, Peter Crosthwaite
This introduces support to the cputlb API for flushing all CPUs TLBs
with one call. This avoids the need for target helpers to iterate
through the vCPUs themselves. Additionally these functions provide a
"wait" argument which will cause the work to be scheduled and the
calling vCPU to exit its loop. The result will be all the flush
operations will be complete by the time the originating vCPU starts
executing again.
It is up to the caller to ensure enough state has been saved so
execution can be restarted at the next appropriate instruction.
Some guest architectures can defer completion of flush operations
until later and are free to set wait to false. If they later schedule
work using the async_safe_work mechanism they can be sure other vCPUs
will have flushed their TLBs by the point execution returns from the
safe work.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
v7
- some checkpatch long line fixes
---
cputlb.c | 100 +++++++++++++++++++++++++++++++++++++++++++++---
include/exec/exec-all.h | 65 +++++++++++++++++++++++++++++--
2 files changed, 156 insertions(+), 9 deletions(-)
diff --git a/cputlb.c b/cputlb.c
index 856213cbcb..3e1cf9b516 100644
--- a/cputlb.c
+++ b/cputlb.c
@@ -73,6 +73,40 @@ QEMU_BUILD_BUG_ON(sizeof(target_ulong) > sizeof(run_on_cpu_data));
QEMU_BUILD_BUG_ON(NB_MMU_MODES > 16);
#define ALL_MMUIDX_BITS ((1 << NB_MMU_MODES) - 1)
+/* flush_all_helper: run fn across all cpus
+ *
+ * If the wait flag is set then the src cpu's helper will be queued as
+ * "safe" work and the loop exited creating a synchronisation point
+ * where all queued work will be finished before execution starts
+ * again.
+ */
+static void flush_all_helper(CPUState *src, bool wait,
+ run_on_cpu_func fn, run_on_cpu_data d)
+{
+ CPUState *cpu;
+
+ if (!wait) {
+ CPU_FOREACH(cpu) {
+ if (cpu != src) {
+ async_run_on_cpu(cpu, fn, d);
+ } else {
+ g_assert(qemu_cpu_is_self(src));
+ fn(src, d);
+ }
+ }
+ } else {
+ CPU_FOREACH(cpu) {
+ if (cpu != src) {
+ async_run_on_cpu(cpu, fn, d);
+ } else {
+ async_safe_run_on_cpu(cpu, fn, d);
+ }
+
+ }
+ cpu_loop_exit(src);
+ }
+}
+
/* statistics */
int tlb_flush_count;
@@ -140,6 +174,12 @@ void tlb_flush(CPUState *cpu)
}
}
+void tlb_flush_all_cpus(CPUState *src_cpu, bool wait)
+{
+ flush_all_helper(src_cpu, wait, tlb_flush_global_async_work,
+ RUN_ON_CPU_NULL);
+}
+
static void tlb_flush_by_mmuidx_async_work(CPUState *cpu, run_on_cpu_data data)
{
CPUArchState *env = cpu->env_ptr;
@@ -214,6 +254,29 @@ void tlb_flush_by_mmuidx(CPUState *cpu, ...)
}
}
+/* This function affects all vCPUs are will ensure all work is
+ * complete by the time the loop restarts
+ */
+void tlb_flush_by_mmuidx_all_cpus(CPUState *src_cpu, bool wait, ...)
+{
+ va_list argp;
+ unsigned long mmu_idx_bitmap;
+
+ va_start(argp, wait);
+ mmu_idx_bitmap = make_mmu_index_bitmap(argp);
+ va_end(argp);
+
+ tlb_debug("mmu_idx: 0x%04lx\n", mmu_idx_bitmap);
+
+ flush_all_helper(src_cpu, wait,
+ tlb_flush_by_mmuidx_async_work,
+ RUN_ON_CPU_HOST_ULONG(mmu_idx_bitmap));
+
+ /* Will not return if wait == true */
+ g_assert(!wait);
+}
+
+
static inline void tlb_flush_entry(CPUTLBEntry *tlb_entry, target_ulong addr)
{
if (addr == (tlb_entry->addr_read &
@@ -359,14 +422,39 @@ void tlb_flush_page_by_mmuidx(CPUState *cpu, target_ulong addr, ...)
}
}
-void tlb_flush_page_all(target_ulong addr)
+/* This function affects all vCPUs are will ensure all work is
+ * complete by the time the loop restarts
+ */
+void tlb_flush_page_by_mmuidx_all_cpus(CPUState *src_cpu, bool wait,
+ target_ulong addr, ...)
{
- CPUState *cpu;
+ unsigned long mmu_idx_bitmap;
+ target_ulong addr_and_mmu_idx;
+ va_list argp;
- CPU_FOREACH(cpu) {
- async_run_on_cpu(cpu, tlb_flush_page_async_work,
- RUN_ON_CPU_TARGET_PTR(addr));
- }
+ va_start(argp, addr);
+ mmu_idx_bitmap = make_mmu_index_bitmap(argp);
+ va_end(argp);
+
+ tlb_debug("addr: "TARGET_FMT_lx" mmu_idx:%lx\n", addr, mmu_idx_bitmap);
+
+ /* This should already be page aligned */
+ addr_and_mmu_idx = addr & TARGET_PAGE_MASK;
+ addr_and_mmu_idx |= mmu_idx_bitmap;
+
+ flush_all_helper(src_cpu, wait,
+ tlb_check_page_and_flush_by_mmuidx_async_work,
+ RUN_ON_CPU_TARGET_PTR(addr_and_mmu_idx));
+ /* Will not return if wait == true */
+ g_assert(!wait);
+}
+
+void tlb_flush_page_all_cpus(CPUState *src, bool wait, target_ulong addr)
+{
+ flush_all_helper(src, wait,
+ tlb_flush_page_async_work, RUN_ON_CPU_TARGET_PTR(addr));
+ /* Will not return if wait == true */
+ g_assert(!wait);
}
/* update the TLBs so that writes to code in the virtual page 'addr'
diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h
index e43cb68355..c93e8fc090 100644
--- a/include/exec/exec-all.h
+++ b/include/exec/exec-all.h
@@ -93,6 +93,18 @@ void cpu_address_space_init(CPUState *cpu, AddressSpace *as, int asidx);
*/
void tlb_flush_page(CPUState *cpu, target_ulong addr);
/**
+ * tlb_flush_page_all_cpus:
+ * @cpu: src CPU of the flush
+ * @wait: If true ensure synchronisation by exiting the cpu_loop
+ * @addr: virtual address of page to be flushed
+ *
+ * Flush one page from the TLB of the specified CPU, for all
+ * MMU indexes. If the caller forces synchronisation they need to
+ * ensure all register state is synchronised as we will exit the
+ * cpu_loop.
+ */
+void tlb_flush_page_all_cpus(CPUState *src, bool wait, target_ulong addr);
+/**
* tlb_flush:
* @cpu: CPU whose TLB should be flushed
*
@@ -103,6 +115,16 @@ void tlb_flush_page(CPUState *cpu, target_ulong addr);
*/
void tlb_flush(CPUState *cpu);
/**
+ * tlb_flush_all_cpus:
+ * @cpu: src CPU of the flush
+ * @wait: If true ensure synchronisation by exiting the cpu_loop
+ *
+ * If the caller forces synchronisation they need to
+ * ensure all register state is synchronised as we will exit the
+ * cpu_loop.
+ */
+void tlb_flush_all_cpus(CPUState *src_cpu, bool wait);
+/**
* tlb_flush_page_by_mmuidx:
* @cpu: CPU whose TLB should be flushed
* @addr: virtual address of page to be flushed
@@ -113,8 +135,22 @@ void tlb_flush(CPUState *cpu);
*/
void tlb_flush_page_by_mmuidx(CPUState *cpu, target_ulong addr, ...);
/**
+ * tlb_flush_page_by_mmuidx_all_cpus:
+ * @cpu: Originating CPU of the flush
+ * @wait: If true ensure synchronisation by exiting the cpu_loop
+ * @addr: virtual address of page to be flushed
+ * @...: list of MMU indexes to flush, terminated by a negative value
+ *
+ * Flush one page from the TLB of all CPUs, for the specified
+ * MMU indexes. This function does not return, the run loop will exit
+ * and restart once the flush is completed.
+ */
+void tlb_flush_page_by_mmuidx_all_cpus(CPUState *cpu, bool wait,
+ target_ulong addr, ...);
+/**
* tlb_flush_by_mmuidx:
* @cpu: CPU whose TLB should be flushed
+ * @wait: If true ensure synchronisation by exiting the cpu_loop
* @...: list of MMU indexes to flush, terminated by a negative value
*
* Flush all entries from the TLB of the specified CPU, for the specified
@@ -122,6 +158,18 @@ void tlb_flush_page_by_mmuidx(CPUState *cpu, target_ulong addr, ...);
*/
void tlb_flush_by_mmuidx(CPUState *cpu, ...);
/**
+ * tlb_flush_by_mmuidx_all_cpus:
+ * @cpu: Originating CPU of the flush
+ * @wait: If true ensure synchronisation by exiting the cpu_loop
+ * @...: list of MMU indexes to flush, terminated by a negative value
+ *
+ * Flush all entries from all TLBs of all CPUs, for the specified
+ * MMU indexes. If the caller forces synchronisation they need to
+ * ensure all register state is synchronised as we will exit the
+ * cpu_loop.
+ */
+void tlb_flush_by_mmuidx_all_cpus(CPUState *cpu, bool wait, ...);
+/**
* tlb_set_page_with_attrs:
* @cpu: CPU to add this TLB entry for
* @vaddr: virtual address of page to add entry for
@@ -158,24 +206,35 @@ void tlb_set_page(CPUState *cpu, target_ulong vaddr,
void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr);
void probe_write(CPUArchState *env, target_ulong addr, int mmu_idx,
uintptr_t retaddr);
-void tlb_flush_page_all(target_ulong addr);
#else
static inline void tlb_flush_page(CPUState *cpu, target_ulong addr)
{
}
-
+static inline void tlb_flush_page_all_cpus(CPUState *src, bool wait,
+ target_ulong addr)
+{
+}
static inline void tlb_flush(CPUState *cpu)
{
}
-
+static inline void tlb_flush_all_cpus(CPUState *src_cpu, bool wait)
+{
+}
static inline void tlb_flush_page_by_mmuidx(CPUState *cpu,
target_ulong addr, ...)
{
}
+static inline void tlb_flush_page_by_mmuidx_all_cpus(CPUState *cpu, bool wait,
+ target_ulong addr, ...)
+{
+}
static inline void tlb_flush_by_mmuidx(CPUState *cpu, ...)
{
}
+static inline void tlb_flush_by_mmuidx_all_cpus(CPUState *cpu, bool wait, ...)
+{
+}
#endif
#define CODE_GEN_ALIGN 16 /* must be >= of the size of a icache line */
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* Re: [Qemu-devel] [PATCH v7 18/27] cputlb: introduce tlb_flush_*_all_cpus
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 18/27] cputlb: introduce tlb_flush_*_all_cpus Alex Bennée
@ 2017-01-23 19:21 ` Richard Henderson
2017-01-24 20:34 ` Alex Bennée
0 siblings, 1 reply; 51+ messages in thread
From: Richard Henderson @ 2017-01-23 19:21 UTC (permalink / raw)
To: Alex Bennée, mttcg, qemu-devel, fred.konrad, a.rigo, cota,
bobby.prani, nikunj
Cc: peter.maydell, claudio.fontana, Peter Crosthwaite, jan.kiszka,
mark.burton, serge.fdrv, pbonzini, bamvor.zhangjian
On 01/19/2017 09:04 AM, Alex Bennée wrote:
> +/* flush_all_helper: run fn across all cpus
> + *
> + * If the wait flag is set then the src cpu's helper will be queued as
> + * "safe" work and the loop exited creating a synchronisation point
> + * where all queued work will be finished before execution starts
> + * again.
> + */
> +static void flush_all_helper(CPUState *src, bool wait,
> + run_on_cpu_func fn, run_on_cpu_data d)
> +{
> + CPUState *cpu;
> +
> + if (!wait) {
> + CPU_FOREACH(cpu) {
> + if (cpu != src) {
> + async_run_on_cpu(cpu, fn, d);
> + } else {
> + g_assert(qemu_cpu_is_self(src));
> + fn(src, d);
> + }
> + }
> + } else {
> + CPU_FOREACH(cpu) {
> + if (cpu != src) {
> + async_run_on_cpu(cpu, fn, d);
> + } else {
> + async_safe_run_on_cpu(cpu, fn, d);
> + }
> +
> + }
> + cpu_loop_exit(src);
> + }
> +}
What's the rationale for not having the target do the exit itself? Surely it
can tell, and simple end the TB after the insn.
r~
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: [Qemu-devel] [PATCH v7 18/27] cputlb: introduce tlb_flush_*_all_cpus
2017-01-23 19:21 ` Richard Henderson
@ 2017-01-24 20:34 ` Alex Bennée
2017-01-24 20:47 ` Richard Henderson
0 siblings, 1 reply; 51+ messages in thread
From: Alex Bennée @ 2017-01-24 20:34 UTC (permalink / raw)
To: Richard Henderson
Cc: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani,
nikunj, peter.maydell, claudio.fontana, Peter Crosthwaite,
jan.kiszka, mark.burton, serge.fdrv, pbonzini, bamvor.zhangjian
Richard Henderson <rth@twiddle.net> writes:
> On 01/19/2017 09:04 AM, Alex Bennée wrote:
>> +/* flush_all_helper: run fn across all cpus
>> + *
>> + * If the wait flag is set then the src cpu's helper will be queued as
>> + * "safe" work and the loop exited creating a synchronisation point
>> + * where all queued work will be finished before execution starts
>> + * again.
>> + */
>> +static void flush_all_helper(CPUState *src, bool wait,
>> + run_on_cpu_func fn, run_on_cpu_data d)
>> +{
>> + CPUState *cpu;
>> +
>> + if (!wait) {
>> + CPU_FOREACH(cpu) {
>> + if (cpu != src) {
>> + async_run_on_cpu(cpu, fn, d);
>> + } else {
>> + g_assert(qemu_cpu_is_self(src));
>> + fn(src, d);
>> + }
>> + }
>> + } else {
>> + CPU_FOREACH(cpu) {
>> + if (cpu != src) {
>> + async_run_on_cpu(cpu, fn, d);
>> + } else {
>> + async_safe_run_on_cpu(cpu, fn, d);
>> + }
>> +
>> + }
>> + cpu_loop_exit(src);
>> + }
>> +}
>
> What's the rationale for not having the target do the exit itself? Surely it
> can tell, and simple end the TB after the insn.
It's more for the global sync functionality. I wanted to keep all the
guts of re-starting the loop with the correct async_safe_work all in one
place with a defined API for the guests rather than have them all do it
themselves.
For the common case of not needing to sync across the cores I agree the
guest is perfectly able to end the TB so its safe work completes next.
In fact the ARM helper calls do exactly that.
--
Alex Bennée
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: [Qemu-devel] [PATCH v7 18/27] cputlb: introduce tlb_flush_*_all_cpus
2017-01-24 20:34 ` Alex Bennée
@ 2017-01-24 20:47 ` Richard Henderson
2017-01-25 14:21 ` Alex Bennée
0 siblings, 1 reply; 51+ messages in thread
From: Richard Henderson @ 2017-01-24 20:47 UTC (permalink / raw)
To: Alex Bennée
Cc: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani,
nikunj, peter.maydell, claudio.fontana, Peter Crosthwaite,
jan.kiszka, mark.burton, serge.fdrv, pbonzini, bamvor.zhangjian
On 01/24/2017 12:34 PM, Alex Bennée wrote:
>
> Richard Henderson <rth@twiddle.net> writes:
>
>> On 01/19/2017 09:04 AM, Alex Bennée wrote:
>>> +/* flush_all_helper: run fn across all cpus
>>> + *
>>> + * If the wait flag is set then the src cpu's helper will be queued as
>>> + * "safe" work and the loop exited creating a synchronisation point
>>> + * where all queued work will be finished before execution starts
>>> + * again.
>>> + */
>>> +static void flush_all_helper(CPUState *src, bool wait,
>>> + run_on_cpu_func fn, run_on_cpu_data d)
>>> +{
>>> + CPUState *cpu;
>>> +
>>> + if (!wait) {
>>> + CPU_FOREACH(cpu) {
>>> + if (cpu != src) {
>>> + async_run_on_cpu(cpu, fn, d);
>>> + } else {
>>> + g_assert(qemu_cpu_is_self(src));
>>> + fn(src, d);
>>> + }
>>> + }
>>> + } else {
>>> + CPU_FOREACH(cpu) {
>>> + if (cpu != src) {
>>> + async_run_on_cpu(cpu, fn, d);
>>> + } else {
>>> + async_safe_run_on_cpu(cpu, fn, d);
>>> + }
>>> +
>>> + }
>>> + cpu_loop_exit(src);
>>> + }
>>> +}
>>
>> What's the rationale for not having the target do the exit itself? Surely it
>> can tell, and simple end the TB after the insn.
>
> It's more for the global sync functionality. I wanted to keep all the
> guts of re-starting the loop with the correct async_safe_work all in one
> place with a defined API for the guests rather than have them all do it
> themselves.
>
> For the common case of not needing to sync across the cores I agree the
> guest is perfectly able to end the TB so its safe work completes next.
> In fact the ARM helper calls do exactly that.
Hmm. Would it make more sense to have two functions then, for wait and !wait?
That would allow the wait function be QEMU_NORETURN, which might make it a bit
more obvious about the interface contract.
r~
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: [Qemu-devel] [PATCH v7 18/27] cputlb: introduce tlb_flush_*_all_cpus
2017-01-24 20:47 ` Richard Henderson
@ 2017-01-25 14:21 ` Alex Bennée
0 siblings, 0 replies; 51+ messages in thread
From: Alex Bennée @ 2017-01-25 14:21 UTC (permalink / raw)
To: Richard Henderson
Cc: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani,
nikunj, peter.maydell, claudio.fontana, Peter Crosthwaite,
jan.kiszka, mark.burton, serge.fdrv, pbonzini, bamvor.zhangjian
Richard Henderson <rth@twiddle.net> writes:
> On 01/24/2017 12:34 PM, Alex Bennée wrote:
>>
>> Richard Henderson <rth@twiddle.net> writes:
>>
>>> On 01/19/2017 09:04 AM, Alex Bennée wrote:
>>>> +/* flush_all_helper: run fn across all cpus
>>>> + *
>>>> + * If the wait flag is set then the src cpu's helper will be queued as
>>>> + * "safe" work and the loop exited creating a synchronisation point
>>>> + * where all queued work will be finished before execution starts
>>>> + * again.
>>>> + */
>>>> +static void flush_all_helper(CPUState *src, bool wait,
>>>> + run_on_cpu_func fn, run_on_cpu_data d)
>>>> +{
>>>> + CPUState *cpu;
>>>> +
>>>> + if (!wait) {
>>>> + CPU_FOREACH(cpu) {
>>>> + if (cpu != src) {
>>>> + async_run_on_cpu(cpu, fn, d);
>>>> + } else {
>>>> + g_assert(qemu_cpu_is_self(src));
>>>> + fn(src, d);
>>>> + }
>>>> + }
>>>> + } else {
>>>> + CPU_FOREACH(cpu) {
>>>> + if (cpu != src) {
>>>> + async_run_on_cpu(cpu, fn, d);
>>>> + } else {
>>>> + async_safe_run_on_cpu(cpu, fn, d);
>>>> + }
>>>> +
>>>> + }
>>>> + cpu_loop_exit(src);
>>>> + }
>>>> +}
>>>
>>> What's the rationale for not having the target do the exit itself? Surely it
>>> can tell, and simple end the TB after the insn.
>>
>> It's more for the global sync functionality. I wanted to keep all the
>> guts of re-starting the loop with the correct async_safe_work all in one
>> place with a defined API for the guests rather than have them all do it
>> themselves.
>>
>> For the common case of not needing to sync across the cores I agree the
>> guest is perfectly able to end the TB so its safe work completes next.
>> In fact the ARM helper calls do exactly that.
>
> Hmm. Would it make more sense to have two functions then, for wait and !wait?
> That would allow the wait function be QEMU_NORETURN, which might make it a bit
> more obvious about the interface contract.
Seems fair. I was worried about multiplying out too many variants in the
API but this seems a good reason to.
--
Alex Bennée
^ permalink raw reply [flat|nested] 51+ messages in thread
* [Qemu-devel] [PATCH v7 19/27] target-arm/powerctl: defer cpu reset work to CPU context
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (17 preceding siblings ...)
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 18/27] cputlb: introduce tlb_flush_*_all_cpus Alex Bennée
@ 2017-01-19 17:04 ` Alex Bennée
2017-01-19 17:05 ` [Qemu-devel] [PATCH v7 20/27] target-arm: ensure BQL taken for ARM_CP_IO register access Alex Bennée
` (7 subsequent siblings)
26 siblings, 0 replies; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:04 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, open list:ARM
When switching a new vCPU on we want to complete a bunch of the setup
work before we start scheduling the vCPU thread. To do this cleanly we
defer vCPU setup to async work which will run the vCPUs execution
context as the thread is woken up. The scheduling of the work will kick
the vCPU awake.
This avoids potential races in MTTCG system emulation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
---
v7
- add const to static mode_for_el[] array
- fix checkpatch long lines
---
target/arm/arm-powerctl.c | 146 ++++++++++++++++++++++++++++------------------
1 file changed, 88 insertions(+), 58 deletions(-)
diff --git a/target/arm/arm-powerctl.c b/target/arm/arm-powerctl.c
index fbb7a15daa..082788e3a4 100644
--- a/target/arm/arm-powerctl.c
+++ b/target/arm/arm-powerctl.c
@@ -48,11 +48,87 @@ CPUState *arm_get_cpu_by_id(uint64_t id)
return NULL;
}
+struct cpu_on_info {
+ uint64_t entry;
+ uint64_t context_id;
+ uint32_t target_el;
+ bool target_aa64;
+};
+
+
+static void arm_set_cpu_on_async_work(CPUState *target_cpu_state,
+ run_on_cpu_data data)
+{
+ ARMCPU *target_cpu = ARM_CPU(target_cpu_state);
+ struct cpu_on_info *info = (struct cpu_on_info *) data.host_ptr;
+
+ /* Initialize the cpu we are turning on */
+ cpu_reset(target_cpu_state);
+ target_cpu->powered_off = false;
+ target_cpu_state->halted = 0;
+
+ if (info->target_aa64) {
+ if ((info->target_el < 3) && arm_feature(&target_cpu->env,
+ ARM_FEATURE_EL3)) {
+ /*
+ * As target mode is AArch64, we need to set lower
+ * exception level (the requested level 2) to AArch64
+ */
+ target_cpu->env.cp15.scr_el3 |= SCR_RW;
+ }
+
+ if ((info->target_el < 2) && arm_feature(&target_cpu->env,
+ ARM_FEATURE_EL2)) {
+ /*
+ * As target mode is AArch64, we need to set lower
+ * exception level (the requested level 1) to AArch64
+ */
+ target_cpu->env.cp15.hcr_el2 |= HCR_RW;
+ }
+
+ target_cpu->env.pstate = aarch64_pstate_mode(info->target_el, true);
+ } else {
+ /* We are requested to boot in AArch32 mode */
+ static const uint32_t mode_for_el[] = { 0,
+ ARM_CPU_MODE_SVC,
+ ARM_CPU_MODE_HYP,
+ ARM_CPU_MODE_SVC };
+
+ cpsr_write(&target_cpu->env, mode_for_el[info->target_el], CPSR_M,
+ CPSRWriteRaw);
+ }
+
+ if (info->target_el == 3) {
+ /* Processor is in secure mode */
+ target_cpu->env.cp15.scr_el3 &= ~SCR_NS;
+ } else {
+ /* Processor is not in secure mode */
+ target_cpu->env.cp15.scr_el3 |= SCR_NS;
+ }
+
+ /* We check if the started CPU is now at the correct level */
+ assert(info->target_el == arm_current_el(&target_cpu->env));
+
+ if (info->target_aa64) {
+ target_cpu->env.xregs[0] = info->context_id;
+ target_cpu->env.thumb = false;
+ } else {
+ target_cpu->env.regs[0] = info->context_id;
+ target_cpu->env.thumb = info->entry & 1;
+ info->entry &= 0xfffffffe;
+ }
+
+ /* Start the new CPU at the requested address */
+ cpu_set_pc(target_cpu_state, info->entry);
+ g_free(info);
+}
+
int arm_set_cpu_on(uint64_t cpuid, uint64_t entry, uint64_t context_id,
uint32_t target_el, bool target_aa64)
{
CPUState *target_cpu_state;
ARMCPU *target_cpu;
+ struct cpu_on_info *info;
DPRINTF("cpu %" PRId64 " (EL %d, %s) @ 0x%" PRIx64 " with R0 = 0x%" PRIx64
"\n", cpuid, target_el, target_aa64 ? "aarch64" : "aarch32", entry,
@@ -109,64 +185,18 @@ int arm_set_cpu_on(uint64_t cpuid, uint64_t entry, uint64_t context_id,
return QEMU_ARM_POWERCTL_INVALID_PARAM;
}
- /* Initialize the cpu we are turning on */
- cpu_reset(target_cpu_state);
- target_cpu->powered_off = false;
- target_cpu_state->halted = 0;
-
- if (target_aa64) {
- if ((target_el < 3) && arm_feature(&target_cpu->env, ARM_FEATURE_EL3)) {
- /*
- * As target mode is AArch64, we need to set lower
- * exception level (the requested level 2) to AArch64
- */
- target_cpu->env.cp15.scr_el3 |= SCR_RW;
- }
-
- if ((target_el < 2) && arm_feature(&target_cpu->env, ARM_FEATURE_EL2)) {
- /*
- * As target mode is AArch64, we need to set lower
- * exception level (the requested level 1) to AArch64
- */
- target_cpu->env.cp15.hcr_el2 |= HCR_RW;
- }
-
- target_cpu->env.pstate = aarch64_pstate_mode(target_el, true);
- } else {
- /* We are requested to boot in AArch32 mode */
- static uint32_t mode_for_el[] = { 0,
- ARM_CPU_MODE_SVC,
- ARM_CPU_MODE_HYP,
- ARM_CPU_MODE_SVC };
-
- cpsr_write(&target_cpu->env, mode_for_el[target_el], CPSR_M,
- CPSRWriteRaw);
- }
-
- if (target_el == 3) {
- /* Processor is in secure mode */
- target_cpu->env.cp15.scr_el3 &= ~SCR_NS;
- } else {
- /* Processor is not in secure mode */
- target_cpu->env.cp15.scr_el3 |= SCR_NS;
- }
-
- /* We check if the started CPU is now at the correct level */
- assert(target_el == arm_current_el(&target_cpu->env));
-
- if (target_aa64) {
- target_cpu->env.xregs[0] = context_id;
- target_cpu->env.thumb = false;
- } else {
- target_cpu->env.regs[0] = context_id;
- target_cpu->env.thumb = entry & 1;
- entry &= 0xfffffffe;
- }
-
- /* Start the new CPU at the requested address */
- cpu_set_pc(target_cpu_state, entry);
-
- qemu_cpu_kick(target_cpu_state);
+ /* To avoid racing with a CPU we are just kicking off we do the
+ * final bit of preparation for the work in the target CPUs
+ * context.
+ */
+ info = g_new(struct cpu_on_info, 1);
+ info->entry = entry;
+ info->context_id = context_id;
+ info->target_el = target_el;
+ info->target_aa64 = target_aa64;
+
+ async_run_on_cpu(target_cpu_state, arm_set_cpu_on_async_work,
+ RUN_ON_CPU_HOST_PTR(info));
/* We are good to go */
return QEMU_ARM_POWERCTL_RET_SUCCESS;
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* [Qemu-devel] [PATCH v7 20/27] target-arm: ensure BQL taken for ARM_CP_IO register access
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (18 preceding siblings ...)
2017-01-19 17:04 ` [Qemu-devel] [PATCH v7 19/27] target-arm/powerctl: defer cpu reset work to CPU context Alex Bennée
@ 2017-01-19 17:05 ` Alex Bennée
2017-01-19 17:05 ` [Qemu-devel] [PATCH v7 21/27] target-arm: helpers which may affect global state need the BQL Alex Bennée
` (6 subsequent siblings)
26 siblings, 0 replies; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:05 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, open list:ARM cores
Most ARMCPRegInfo structures just allow updating of the CPU field.
However some have more complex operations that *may* be have cross vCPU
effects therefor need to be serialised. The most obvious examples at the
moment are things that affect the GICv3 IRQ controller. To avoid
applying this requirement to all registers with custom access functions
we check for if the type is marked ARM_CP_IO.
By default all MMIO access to devices already takes the BQL to serialise
hardware emulation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
---
hw/intc/arm_gicv3_cpuif.c | 3 +++
target/arm/op_helper.c | 39 +++++++++++++++++++++++++++++++++++----
2 files changed, 38 insertions(+), 4 deletions(-)
diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c
index 35e8eb30fc..897ae31607 100644
--- a/hw/intc/arm_gicv3_cpuif.c
+++ b/hw/intc/arm_gicv3_cpuif.c
@@ -13,6 +13,7 @@
*/
#include "qemu/osdep.h"
+#include "qemu/main-loop.h"
#include "trace.h"
#include "gicv3_internal.h"
#include "cpu.h"
@@ -128,6 +129,8 @@ void gicv3_cpuif_update(GICv3CPUState *cs)
ARMCPU *cpu = ARM_CPU(cs->cpu);
CPUARMState *env = &cpu->env;
+ g_assert(qemu_mutex_iothread_locked());
+
trace_gicv3_cpuif_update(gicv3_redist_affid(cs), cs->hppi.irq,
cs->hppi.grp, cs->hppi.prio);
diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c
index ba796d898e..1348789760 100644
--- a/target/arm/op_helper.c
+++ b/target/arm/op_helper.c
@@ -18,6 +18,7 @@
*/
#include "qemu/osdep.h"
#include "qemu/log.h"
+#include "qemu/main-loop.h"
#include "cpu.h"
#include "exec/helper-proto.h"
#include "internals.h"
@@ -735,28 +736,58 @@ void HELPER(set_cp_reg)(CPUARMState *env, void *rip, uint32_t value)
{
const ARMCPRegInfo *ri = rip;
- ri->writefn(env, ri, value);
+ if (ri->type & ARM_CP_IO) {
+ qemu_mutex_lock_iothread();
+ ri->writefn(env, ri, value);
+ qemu_mutex_unlock_iothread();
+ } else {
+ ri->writefn(env, ri, value);
+ }
}
uint32_t HELPER(get_cp_reg)(CPUARMState *env, void *rip)
{
const ARMCPRegInfo *ri = rip;
+ uint32_t res;
- return ri->readfn(env, ri);
+ if (ri->type & ARM_CP_IO) {
+ qemu_mutex_lock_iothread();
+ res = ri->readfn(env, ri);
+ qemu_mutex_unlock_iothread();
+ } else {
+ res = ri->readfn(env, ri);
+ }
+
+ return res;
}
void HELPER(set_cp_reg64)(CPUARMState *env, void *rip, uint64_t value)
{
const ARMCPRegInfo *ri = rip;
- ri->writefn(env, ri, value);
+ if (ri->type & ARM_CP_IO) {
+ qemu_mutex_lock_iothread();
+ ri->writefn(env, ri, value);
+ qemu_mutex_unlock_iothread();
+ } else {
+ ri->writefn(env, ri, value);
+ }
}
uint64_t HELPER(get_cp_reg64)(CPUARMState *env, void *rip)
{
const ARMCPRegInfo *ri = rip;
+ uint64_t res;
+
+ if (ri->type & ARM_CP_IO) {
+ qemu_mutex_lock_iothread();
+ res = ri->readfn(env, ri);
+ qemu_mutex_unlock_iothread();
+ } else {
+ res = ri->readfn(env, ri);
+ }
- return ri->readfn(env, ri);
+ return res;
}
void HELPER(msr_i_pstate)(CPUARMState *env, uint32_t op, uint32_t imm)
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* [Qemu-devel] [PATCH v7 21/27] target-arm: helpers which may affect global state need the BQL
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (19 preceding siblings ...)
2017-01-19 17:05 ` [Qemu-devel] [PATCH v7 20/27] target-arm: ensure BQL taken for ARM_CP_IO register access Alex Bennée
@ 2017-01-19 17:05 ` Alex Bennée
2017-01-19 17:05 ` [Qemu-devel] [PATCH v7 22/27] target-arm: don't generate WFE/YIELD calls for MTTCG Alex Bennée
` (5 subsequent siblings)
26 siblings, 0 replies; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:05 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, open list:ARM
As the arm_call_el_change_hook may affect global state (for example with
updating the global GIC state) we need to assert/take the BQL.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
---
target/arm/helper.c | 6 ++++++
target/arm/op_helper.c | 4 ++++
2 files changed, 10 insertions(+)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index b3875c7c6e..87809562b9 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -6672,6 +6672,12 @@ void arm_cpu_do_interrupt(CPUState *cs)
arm_cpu_do_interrupt_aarch32(cs);
}
+ /* Hooks may change global state so BQL should be held, also the
+ * BQL needs to be held for any modification of
+ * cs->interrupt_request.
+ */
+ g_assert(qemu_mutex_iothread_locked());
+
arm_call_el_change_hook(cpu);
if (!kvm_enabled()) {
diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c
index 1348789760..e1a883c595 100644
--- a/target/arm/op_helper.c
+++ b/target/arm/op_helper.c
@@ -488,7 +488,9 @@ void HELPER(cpsr_write_eret)(CPUARMState *env, uint32_t val)
*/
env->regs[15] &= (env->thumb ? ~1 : ~3);
+ qemu_mutex_lock_iothread();
arm_call_el_change_hook(arm_env_get_cpu(env));
+ qemu_mutex_unlock_iothread();
}
/* Access to user mode registers from privileged modes. */
@@ -1020,7 +1022,9 @@ void HELPER(exception_return)(CPUARMState *env)
cur_el, new_el, env->pc);
}
+ qemu_mutex_lock_iothread();
arm_call_el_change_hook(arm_env_get_cpu(env));
+ qemu_mutex_unlock_iothread();
return;
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* [Qemu-devel] [PATCH v7 22/27] target-arm: don't generate WFE/YIELD calls for MTTCG
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (20 preceding siblings ...)
2017-01-19 17:05 ` [Qemu-devel] [PATCH v7 21/27] target-arm: helpers which may affect global state need the BQL Alex Bennée
@ 2017-01-19 17:05 ` Alex Bennée
2017-01-19 17:05 ` [Qemu-devel] [PATCH v7 23/27] target-arm/cpu.h: make ARM_CP defined consistent Alex Bennée
` (4 subsequent siblings)
26 siblings, 0 replies; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:05 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, open list:ARM
The WFE and YIELD instructions are really only hints and in TCG's case
they were useful to move the scheduling on from one vCPU to the next. In
the parallel context (MTTCG) this just causes an unnecessary cpu_exit
and contention of the BQL.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
---
target/arm/op_helper.c | 7 +++++++
target/arm/translate-a64.c | 8 ++++++--
target/arm/translate.c | 20 ++++++++++++++++----
3 files changed, 29 insertions(+), 6 deletions(-)
diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c
index e1a883c595..abfa7cdd39 100644
--- a/target/arm/op_helper.c
+++ b/target/arm/op_helper.c
@@ -436,6 +436,13 @@ void HELPER(yield)(CPUARMState *env)
ARMCPU *cpu = arm_env_get_cpu(env);
CPUState *cs = CPU(cpu);
+ /* When running in MTTCG we don't generate jumps to the yield and
+ * WFE helpers as it won't affect the scheduling of other vCPUs.
+ * If we wanted to more completely model WFE/SEV so we don't busy
+ * spin unnecessarily we would need to do something more involved.
+ */
+ g_assert(!parallel_cpus);
+
/* This is a non-trappable hint instruction that generally indicates
* that the guest is currently busy-looping. Yield control back to the
* top level loop so that a more deserving VCPU has a chance to run.
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index d0352e2045..7e7131fe2f 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -1342,10 +1342,14 @@ static void handle_hint(DisasContext *s, uint32_t insn,
s->is_jmp = DISAS_WFI;
return;
case 1: /* YIELD */
- s->is_jmp = DISAS_YIELD;
+ if (!parallel_cpus) {
+ s->is_jmp = DISAS_YIELD;
+ }
return;
case 2: /* WFE */
- s->is_jmp = DISAS_WFE;
+ if (!parallel_cpus) {
+ s->is_jmp = DISAS_WFE;
+ }
return;
case 4: /* SEV */
case 5: /* SEVL */
diff --git a/target/arm/translate.c b/target/arm/translate.c
index c9186b6195..4301562527 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -4345,20 +4345,32 @@ static void gen_exception_return(DisasContext *s, TCGv_i32 pc)
gen_rfe(s, pc, load_cpu_field(spsr));
}
+/*
+ * For WFI we will halt the vCPU until an IRQ. For WFE and YIELD we
+ * only call the helper when running single threaded TCG code to ensure
+ * the next round-robin scheduled vCPU gets a crack. In MTTCG mode we
+ * just skip this instruction. Currently the SEV/SEVL instructions
+ * which are *one* of many ways to wake the CPU from WFE are not
+ * implemented so we can't sleep like WFI does.
+ */
static void gen_nop_hint(DisasContext *s, int val)
{
switch (val) {
case 1: /* yield */
- gen_set_pc_im(s, s->pc);
- s->is_jmp = DISAS_YIELD;
+ if (!parallel_cpus) {
+ gen_set_pc_im(s, s->pc);
+ s->is_jmp = DISAS_YIELD;
+ }
break;
case 3: /* wfi */
gen_set_pc_im(s, s->pc);
s->is_jmp = DISAS_WFI;
break;
case 2: /* wfe */
- gen_set_pc_im(s, s->pc);
- s->is_jmp = DISAS_WFE;
+ if (!parallel_cpus) {
+ gen_set_pc_im(s, s->pc);
+ s->is_jmp = DISAS_WFE;
+ }
break;
case 4: /* sev */
case 5: /* sevl */
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* [Qemu-devel] [PATCH v7 23/27] target-arm/cpu.h: make ARM_CP defined consistent
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (21 preceding siblings ...)
2017-01-19 17:05 ` [Qemu-devel] [PATCH v7 22/27] target-arm: don't generate WFE/YIELD calls for MTTCG Alex Bennée
@ 2017-01-19 17:05 ` Alex Bennée
2017-01-19 17:05 ` [Qemu-devel] [PATCH v7 24/27] target-arm: introduce ARM_CP_EXIT_PC Alex Bennée
` (3 subsequent siblings)
26 siblings, 0 replies; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:05 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, open list:ARM
This is a purely mechanical change to make the ARM_CP flags neatly
align and use a consistent format so it is easier to see which bit
each flag is.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
target/arm/cpu.h | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 7bd16eec18..366b619b8a 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -1389,20 +1389,20 @@ static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid)
* need to be surrounded by gen_io_start()/gen_io_end(). In particular,
* registers which implement clocks or timers require this.
*/
-#define ARM_CP_SPECIAL 1
-#define ARM_CP_CONST 2
-#define ARM_CP_64BIT 4
-#define ARM_CP_SUPPRESS_TB_END 8
-#define ARM_CP_OVERRIDE 16
-#define ARM_CP_ALIAS 32
-#define ARM_CP_IO 64
-#define ARM_CP_NO_RAW 128
-#define ARM_CP_NOP (ARM_CP_SPECIAL | (1 << 8))
-#define ARM_CP_WFI (ARM_CP_SPECIAL | (2 << 8))
-#define ARM_CP_NZCV (ARM_CP_SPECIAL | (3 << 8))
-#define ARM_CP_CURRENTEL (ARM_CP_SPECIAL | (4 << 8))
-#define ARM_CP_DC_ZVA (ARM_CP_SPECIAL | (5 << 8))
-#define ARM_LAST_SPECIAL ARM_CP_DC_ZVA
+#define ARM_CP_SPECIAL (1 << 0)
+#define ARM_CP_CONST (1 << 1)
+#define ARM_CP_64BIT (1 << 2)
+#define ARM_CP_SUPPRESS_TB_END (1 << 3)
+#define ARM_CP_OVERRIDE (1 << 4)
+#define ARM_CP_ALIAS (1 << 5)
+#define ARM_CP_IO (1 << 6)
+#define ARM_CP_NO_RAW (1 << 7)
+#define ARM_CP_NOP (ARM_CP_SPECIAL | (1 << 8))
+#define ARM_CP_WFI (ARM_CP_SPECIAL | (2 << 8))
+#define ARM_CP_NZCV (ARM_CP_SPECIAL | (3 << 8))
+#define ARM_CP_CURRENTEL (ARM_CP_SPECIAL | (4 << 8))
+#define ARM_CP_DC_ZVA (ARM_CP_SPECIAL | (5 << 8))
+#define ARM_LAST_SPECIAL ARM_CP_DC_ZVA
/* Used only as a terminator for ARMCPRegInfo lists */
#define ARM_CP_SENTINEL 0xffff
/* Mask of only the flag bits in a type field */
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* [Qemu-devel] [PATCH v7 24/27] target-arm: introduce ARM_CP_EXIT_PC
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (22 preceding siblings ...)
2017-01-19 17:05 ` [Qemu-devel] [PATCH v7 23/27] target-arm/cpu.h: make ARM_CP defined consistent Alex Bennée
@ 2017-01-19 17:05 ` Alex Bennée
2017-01-19 17:05 ` [Qemu-devel] [PATCH v7 25/27] target-arm: ensure all cross vCPUs TLB flushes complete Alex Bennée
` (2 subsequent siblings)
26 siblings, 0 replies; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:05 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, open list:ARM
Some helpers may trigger an immediate exit of the cpu_loop. If this
happens the PC need to be rectified to ensure the restart will begin
on the next instruction.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
target/arm/cpu.h | 3 ++-
target/arm/translate-a64.c | 4 ++++
target/arm/translate.c | 4 ++++
3 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 366b619b8a..29d15fc522 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -1402,7 +1402,8 @@ static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid)
#define ARM_CP_NZCV (ARM_CP_SPECIAL | (3 << 8))
#define ARM_CP_CURRENTEL (ARM_CP_SPECIAL | (4 << 8))
#define ARM_CP_DC_ZVA (ARM_CP_SPECIAL | (5 << 8))
-#define ARM_LAST_SPECIAL ARM_CP_DC_ZVA
+#define ARM_CP_EXIT_PC (ARM_CP_SPECIAL | (6 << 8))
+#define ARM_LAST_SPECIAL ARM_CP_EXIT_PC
/* Used only as a terminator for ARMCPRegInfo lists */
#define ARM_CP_SENTINEL 0xffff
/* Mask of only the flag bits in a type field */
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index 7e7131fe2f..98d4fac070 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -1561,6 +1561,10 @@ static void handle_sys(DisasContext *s, uint32_t insn, bool isread,
tcg_rt = cpu_reg(s, rt);
gen_helper_dc_zva(cpu_env, tcg_rt);
return;
+ case ARM_CP_EXIT_PC:
+ /* The helper may exit the cpu_loop so ensure PC is correct */
+ gen_a64_set_pc_im(s->pc);
+ break;
default:
break;
}
diff --git a/target/arm/translate.c b/target/arm/translate.c
index 4301562527..e9f46eb757 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -7510,6 +7510,10 @@ static int disas_coproc_insn(DisasContext *s, uint32_t insn)
gen_set_pc_im(s, s->pc);
s->is_jmp = DISAS_WFI;
return 0;
+ case ARM_CP_EXIT_PC:
+ /* The helper may exit the cpu_loop so ensure PC is correct */
+ gen_set_pc_im(s, s->pc);
+ break;
default:
break;
}
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* [Qemu-devel] [PATCH v7 25/27] target-arm: ensure all cross vCPUs TLB flushes complete
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (23 preceding siblings ...)
2017-01-19 17:05 ` [Qemu-devel] [PATCH v7 24/27] target-arm: introduce ARM_CP_EXIT_PC Alex Bennée
@ 2017-01-19 17:05 ` Alex Bennée
2017-01-19 17:05 ` [Qemu-devel] [PATCH v7 26/27] tcg: enable MTTCG by default for ARM on x86 hosts Alex Bennée
2017-01-19 17:05 ` [Qemu-devel] [PATCH v7 27/27] target-ppc: take global mutex for set_irq Alex Bennée
26 siblings, 0 replies; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:05 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, open list:ARM
Previously flushes on other vCPUs would only get serviced when they
exited their TranslationBlocks. While this isn't overly problematic it
violates the semantics of TLB flush from the point of view of source
vCPU.
To solve this we call the cputlb *_all_cpus() functions to do the
flushes and ask it to ensure all flushes are completed before we start
the next instruction. As this involves exiting the cpu_loop we need to
ensure the PC is saved before the tlb helper functions are called.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
target/arm/helper.c | 194 ++++++++++++++++++++++------------------------------
1 file changed, 83 insertions(+), 111 deletions(-)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 87809562b9..2b696ef8ee 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -536,41 +536,33 @@ static void tlbimvaa_write(CPUARMState *env, const ARMCPRegInfo *ri,
static void tlbiall_is_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- CPUState *other_cs;
+ CPUState *cs = ENV_GET_CPU(env);
- CPU_FOREACH(other_cs) {
- tlb_flush(other_cs);
- }
+ tlb_flush_all_cpus(cs, true);
}
static void tlbiasid_is_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- CPUState *other_cs;
+ CPUState *cs = ENV_GET_CPU(env);
- CPU_FOREACH(other_cs) {
- tlb_flush(other_cs);
- }
+ tlb_flush_all_cpus(cs, true);
}
static void tlbimva_is_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- CPUState *other_cs;
+ CPUState *cs = ENV_GET_CPU(env);
- CPU_FOREACH(other_cs) {
- tlb_flush_page(other_cs, value & TARGET_PAGE_MASK);
- }
+ tlb_flush_page_all_cpus(cs, true, value & TARGET_PAGE_MASK);
}
static void tlbimvaa_is_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- CPUState *other_cs;
+ CPUState *cs = ENV_GET_CPU(env);
- CPU_FOREACH(other_cs) {
- tlb_flush_page(other_cs, value & TARGET_PAGE_MASK);
- }
+ tlb_flush_page_all_cpus(cs, true, value & TARGET_PAGE_MASK);
}
static void tlbiall_nsnh_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -585,12 +577,10 @@ static void tlbiall_nsnh_write(CPUARMState *env, const ARMCPRegInfo *ri,
static void tlbiall_nsnh_is_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- CPUState *other_cs;
+ CPUState *cs = ENV_GET_CPU(env);
- CPU_FOREACH(other_cs) {
- tlb_flush_by_mmuidx(other_cs, ARMMMUIdx_S12NSE1,
- ARMMMUIdx_S12NSE0, ARMMMUIdx_S2NS, -1);
- }
+ tlb_flush_by_mmuidx_all_cpus(cs, true, ARMMMUIdx_S12NSE1,
+ ARMMMUIdx_S12NSE0, ARMMMUIdx_S2NS, -1);
}
static void tlbiipas2_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -617,7 +607,7 @@ static void tlbiipas2_write(CPUARMState *env, const ARMCPRegInfo *ri,
static void tlbiipas2_is_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- CPUState *other_cs;
+ CPUState *cs = ENV_GET_CPU(env);
uint64_t pageaddr;
if (!arm_feature(env, ARM_FEATURE_EL2) || !(env->cp15.scr_el3 & SCR_NS)) {
@@ -626,9 +616,7 @@ static void tlbiipas2_is_write(CPUARMState *env, const ARMCPRegInfo *ri,
pageaddr = sextract64(value << 12, 0, 40);
- CPU_FOREACH(other_cs) {
- tlb_flush_page_by_mmuidx(other_cs, pageaddr, ARMMMUIdx_S2NS, -1);
- }
+ tlb_flush_page_by_mmuidx_all_cpus(cs, true, pageaddr, ARMMMUIdx_S2NS, -1);
}
static void tlbiall_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -642,11 +630,9 @@ static void tlbiall_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri,
static void tlbiall_hyp_is_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- CPUState *other_cs;
+ CPUState *cs = ENV_GET_CPU(env);
- CPU_FOREACH(other_cs) {
- tlb_flush_by_mmuidx(other_cs, ARMMMUIdx_S1E2, -1);
- }
+ tlb_flush_by_mmuidx_all_cpus(cs, true, ARMMMUIdx_S1E2, -1);
}
static void tlbimva_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -661,12 +647,10 @@ static void tlbimva_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri,
static void tlbimva_hyp_is_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- CPUState *other_cs;
+ CPUState *cs = ENV_GET_CPU(env);
uint64_t pageaddr = value & ~MAKE_64BIT_MASK(0, 12);
- CPU_FOREACH(other_cs) {
- tlb_flush_page_by_mmuidx(other_cs, pageaddr, ARMMMUIdx_S1E2, -1);
- }
+ tlb_flush_page_by_mmuidx_all_cpus(cs, true, pageaddr, ARMMMUIdx_S1E2, -1);
}
static const ARMCPRegInfo cp_reginfo[] = {
@@ -1335,14 +1319,16 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
static const ARMCPRegInfo v7mp_cp_reginfo[] = {
/* 32 bit TLB invalidates, Inner Shareable */
{ .name = "TLBIALLIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0,
- .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiall_is_write },
+ .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC, .access = PL1_W,
+ .writefn = tlbiall_is_write },
{ .name = "TLBIMVAIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 1,
- .type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_is_write },
+ .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC, .access = PL1_W,
+ .writefn = tlbimva_is_write },
{ .name = "TLBIASIDIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 2,
- .type = ARM_CP_NO_RAW, .access = PL1_W,
+ .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC, .access = PL1_W,
.writefn = tlbiasid_is_write },
{ .name = "TLBIMVAAIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 3,
- .type = ARM_CP_NO_RAW, .access = PL1_W,
+ .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC, .access = PL1_W,
.writefn = tlbimvaa_is_write },
REGINFO_SENTINEL
};
@@ -2855,8 +2841,7 @@ static CPAccessResult aa64_cacheop_access(CPUARMState *env,
static void tlbi_aa64_vmalle1_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- ARMCPU *cpu = arm_env_get_cpu(env);
- CPUState *cs = CPU(cpu);
+ CPUState *cs = ENV_GET_CPU(env);
if (arm_is_secure_below_el3(env)) {
tlb_flush_by_mmuidx(cs, ARMMMUIdx_S1SE1, ARMMMUIdx_S1SE0, -1);
@@ -2868,16 +2853,15 @@ static void tlbi_aa64_vmalle1_write(CPUARMState *env, const ARMCPRegInfo *ri,
static void tlbi_aa64_vmalle1is_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
+ CPUState *cs = ENV_GET_CPU(env);
bool sec = arm_is_secure_below_el3(env);
- CPUState *other_cs;
- CPU_FOREACH(other_cs) {
- if (sec) {
- tlb_flush_by_mmuidx(other_cs, ARMMMUIdx_S1SE1, ARMMMUIdx_S1SE0, -1);
- } else {
- tlb_flush_by_mmuidx(other_cs, ARMMMUIdx_S12NSE1,
- ARMMMUIdx_S12NSE0, -1);
- }
+ if (sec) {
+ tlb_flush_by_mmuidx_all_cpus(cs, true, ARMMMUIdx_S1SE1,
+ ARMMMUIdx_S1SE0, -1);
+ } else {
+ tlb_flush_by_mmuidx_all_cpus(cs, true, ARMMMUIdx_S12NSE1,
+ ARMMMUIdx_S12NSE0, -1);
}
}
@@ -2930,39 +2914,34 @@ static void tlbi_aa64_alle1is_write(CPUARMState *env, const ARMCPRegInfo *ri,
*/
bool sec = arm_is_secure_below_el3(env);
bool has_el2 = arm_feature(env, ARM_FEATURE_EL2);
- CPUState *other_cs;
-
- CPU_FOREACH(other_cs) {
- if (sec) {
- tlb_flush_by_mmuidx(other_cs, ARMMMUIdx_S1SE1, ARMMMUIdx_S1SE0, -1);
- } else if (has_el2) {
- tlb_flush_by_mmuidx(other_cs, ARMMMUIdx_S12NSE1,
- ARMMMUIdx_S12NSE0, ARMMMUIdx_S2NS, -1);
- } else {
- tlb_flush_by_mmuidx(other_cs, ARMMMUIdx_S12NSE1,
- ARMMMUIdx_S12NSE0, -1);
- }
+ CPUState *cs = ENV_GET_CPU(env);
+
+ if (sec) {
+ tlb_flush_by_mmuidx_all_cpus(cs, true, ARMMMUIdx_S1SE1,
+ ARMMMUIdx_S1SE0, -1);
+ } else if (has_el2) {
+ tlb_flush_by_mmuidx_all_cpus(cs, true, ARMMMUIdx_S12NSE1,
+ ARMMMUIdx_S12NSE0, ARMMMUIdx_S2NS, -1);
+ } else {
+ tlb_flush_by_mmuidx_all_cpus(cs, true, ARMMMUIdx_S12NSE1,
+ ARMMMUIdx_S12NSE0, -1);
}
}
static void tlbi_aa64_alle2is_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- CPUState *other_cs;
+ CPUState *cs = ENV_GET_CPU(env);
- CPU_FOREACH(other_cs) {
- tlb_flush_by_mmuidx(other_cs, ARMMMUIdx_S1E2, -1);
- }
+ tlb_flush_by_mmuidx_all_cpus(cs, true, ARMMMUIdx_S1E2, -1);
}
static void tlbi_aa64_alle3is_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- CPUState *other_cs;
+ CPUState *cs = ENV_GET_CPU(env);
- CPU_FOREACH(other_cs) {
- tlb_flush_by_mmuidx(other_cs, ARMMMUIdx_S1E3, -1);
- }
+ tlb_flush_by_mmuidx_all_cpus(cs, true, ARMMMUIdx_S1E3, -1);
}
static void tlbi_aa64_vae1_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -3017,41 +2996,36 @@ static void tlbi_aa64_vae3_write(CPUARMState *env, const ARMCPRegInfo *ri,
static void tlbi_aa64_vae1is_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
+ ARMCPU *cpu = arm_env_get_cpu(env);
+ CPUState *cs = CPU(cpu);
bool sec = arm_is_secure_below_el3(env);
- CPUState *other_cs;
uint64_t pageaddr = sextract64(value << 12, 0, 56);
- CPU_FOREACH(other_cs) {
- if (sec) {
- tlb_flush_page_by_mmuidx(other_cs, pageaddr, ARMMMUIdx_S1SE1,
- ARMMMUIdx_S1SE0, -1);
- } else {
- tlb_flush_page_by_mmuidx(other_cs, pageaddr, ARMMMUIdx_S12NSE1,
- ARMMMUIdx_S12NSE0, -1);
- }
+ if (sec) {
+ tlb_flush_page_by_mmuidx_all_cpus(cs, true, pageaddr, ARMMMUIdx_S1SE1,
+ ARMMMUIdx_S1SE0, -1);
+ } else {
+ tlb_flush_page_by_mmuidx_all_cpus(cs, true, pageaddr, ARMMMUIdx_S12NSE1,
+ ARMMMUIdx_S12NSE0, -1);
}
}
static void tlbi_aa64_vae2is_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- CPUState *other_cs;
+ CPUState *cs = ENV_GET_CPU(env);
uint64_t pageaddr = sextract64(value << 12, 0, 56);
- CPU_FOREACH(other_cs) {
- tlb_flush_page_by_mmuidx(other_cs, pageaddr, ARMMMUIdx_S1E2, -1);
- }
+ tlb_flush_page_by_mmuidx_all_cpus(cs, true, pageaddr, ARMMMUIdx_S1E2, -1);
}
static void tlbi_aa64_vae3is_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- CPUState *other_cs;
+ CPUState *cs = ENV_GET_CPU(env);
uint64_t pageaddr = sextract64(value << 12, 0, 56);
- CPU_FOREACH(other_cs) {
- tlb_flush_page_by_mmuidx(other_cs, pageaddr, ARMMMUIdx_S1E3, -1);
- }
+ tlb_flush_page_by_mmuidx_all_cpus(cs, true, pageaddr, ARMMMUIdx_S1E3, -1);
}
static void tlbi_aa64_ipas2e1_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -3079,7 +3053,7 @@ static void tlbi_aa64_ipas2e1_write(CPUARMState *env, const ARMCPRegInfo *ri,
static void tlbi_aa64_ipas2e1is_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- CPUState *other_cs;
+ CPUState *cs = ENV_GET_CPU(env);
uint64_t pageaddr;
if (!arm_feature(env, ARM_FEATURE_EL2) || !(env->cp15.scr_el3 & SCR_NS)) {
@@ -3088,9 +3062,7 @@ static void tlbi_aa64_ipas2e1is_write(CPUARMState *env, const ARMCPRegInfo *ri,
pageaddr = sextract64(value << 12, 0, 48);
- CPU_FOREACH(other_cs) {
- tlb_flush_page_by_mmuidx(other_cs, pageaddr, ARMMMUIdx_S2NS, -1);
- }
+ tlb_flush_page_by_mmuidx_all_cpus(cs, true, pageaddr, ARMMMUIdx_S2NS, -1);
}
static CPAccessResult aa64_zva_access(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -3247,27 +3219,27 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
/* TLBI operations */
{ .name = "TLBI_VMALLE1IS", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0,
- .access = PL1_W, .type = ARM_CP_NO_RAW,
+ .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC,
.writefn = tlbi_aa64_vmalle1is_write },
{ .name = "TLBI_VAE1IS", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 1,
- .access = PL1_W, .type = ARM_CP_NO_RAW,
+ .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC,
.writefn = tlbi_aa64_vae1is_write },
{ .name = "TLBI_ASIDE1IS", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 2,
- .access = PL1_W, .type = ARM_CP_NO_RAW,
+ .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC,
.writefn = tlbi_aa64_vmalle1is_write },
{ .name = "TLBI_VAAE1IS", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 3,
- .access = PL1_W, .type = ARM_CP_NO_RAW,
+ .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC,
.writefn = tlbi_aa64_vae1is_write },
{ .name = "TLBI_VALE1IS", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 5,
- .access = PL1_W, .type = ARM_CP_NO_RAW,
+ .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC,
.writefn = tlbi_aa64_vae1is_write },
{ .name = "TLBI_VAALE1IS", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 7,
- .access = PL1_W, .type = ARM_CP_NO_RAW,
+ .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC,
.writefn = tlbi_aa64_vae1is_write },
{ .name = "TLBI_VMALLE1", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 0,
@@ -3295,19 +3267,19 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
.writefn = tlbi_aa64_vae1_write },
{ .name = "TLBI_IPAS2E1IS", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 1,
- .access = PL2_W, .type = ARM_CP_NO_RAW,
+ .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC,
.writefn = tlbi_aa64_ipas2e1is_write },
{ .name = "TLBI_IPAS2LE1IS", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 5,
- .access = PL2_W, .type = ARM_CP_NO_RAW,
+ .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC,
.writefn = tlbi_aa64_ipas2e1is_write },
{ .name = "TLBI_ALLE1IS", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 4,
- .access = PL2_W, .type = ARM_CP_NO_RAW,
+ .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC,
.writefn = tlbi_aa64_alle1is_write },
{ .name = "TLBI_VMALLS12E1IS", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 6,
- .access = PL2_W, .type = ARM_CP_NO_RAW,
+ .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC,
.writefn = tlbi_aa64_alle1is_write },
{ .name = "TLBI_IPAS2E1", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 1,
@@ -3323,7 +3295,7 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
.writefn = tlbi_aa64_alle1_write },
{ .name = "TLBI_VMALLS12E1", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 6,
- .access = PL2_W, .type = ARM_CP_NO_RAW,
+ .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC,
.writefn = tlbi_aa64_alle1is_write },
#ifndef CONFIG_USER_ONLY
/* 64 bit address translation operations */
@@ -3369,7 +3341,7 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
{ .name = "TLBIMVALIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 5,
.type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_is_write },
{ .name = "TLBIMVAALIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 7,
- .type = ARM_CP_NO_RAW, .access = PL1_W,
+ .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC, .access = PL1_W,
.writefn = tlbimvaa_is_write },
{ .name = "TLBIMVAL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 5,
.type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_write },
@@ -3380,7 +3352,7 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
.writefn = tlbimva_hyp_write },
{ .name = "TLBIMVALHIS",
.cp = 15, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 5,
- .type = ARM_CP_NO_RAW, .access = PL2_W,
+ .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC, .access = PL2_W,
.writefn = tlbimva_hyp_is_write },
{ .name = "TLBIIPAS2",
.cp = 15, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 1,
@@ -3388,7 +3360,7 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
.writefn = tlbiipas2_write },
{ .name = "TLBIIPAS2IS",
.cp = 15, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 1,
- .type = ARM_CP_NO_RAW, .access = PL2_W,
+ .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC, .access = PL2_W,
.writefn = tlbiipas2_is_write },
{ .name = "TLBIIPAS2L",
.cp = 15, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 5,
@@ -3396,7 +3368,7 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
.writefn = tlbiipas2_write },
{ .name = "TLBIIPAS2LIS",
.cp = 15, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 5,
- .type = ARM_CP_NO_RAW, .access = PL2_W,
+ .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC, .access = PL2_W,
.writefn = tlbiipas2_is_write },
/* 32 bit cache operations */
{ .name = "ICIALLUIS", .cp = 15, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 0,
@@ -3736,7 +3708,7 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
.writefn = tlbiall_nsnh_write },
{ .name = "TLBIALLNSNHIS",
.cp = 15, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 4,
- .type = ARM_CP_NO_RAW, .access = PL2_W,
+ .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC, .access = PL2_W,
.writefn = tlbiall_nsnh_is_write },
{ .name = "TLBIALLH", .cp = 15, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 0,
.type = ARM_CP_NO_RAW, .access = PL2_W,
@@ -3748,7 +3720,7 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
.type = ARM_CP_NO_RAW, .access = PL2_W,
.writefn = tlbimva_hyp_write },
{ .name = "TLBIMVAHIS", .cp = 15, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 1,
- .type = ARM_CP_NO_RAW, .access = PL2_W,
+ .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC, .access = PL2_W,
.writefn = tlbimva_hyp_is_write },
{ .name = "TLBI_ALLE2", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 0,
@@ -3764,15 +3736,15 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
.writefn = tlbi_aa64_vae2_write },
{ .name = "TLBI_ALLE2IS", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 0,
- .access = PL2_W, .type = ARM_CP_NO_RAW,
+ .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC,
.writefn = tlbi_aa64_alle2is_write },
{ .name = "TLBI_VAE2IS", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 1,
- .type = ARM_CP_NO_RAW, .access = PL2_W,
+ .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC, .access = PL2_W,
.writefn = tlbi_aa64_vae2is_write },
{ .name = "TLBI_VALE2IS", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 5,
- .access = PL2_W, .type = ARM_CP_NO_RAW,
+ .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC,
.writefn = tlbi_aa64_vae2is_write },
#ifndef CONFIG_USER_ONLY
/* Unlike the other EL2-related AT operations, these must
@@ -3959,15 +3931,15 @@ static const ARMCPRegInfo el3_cp_reginfo[] = {
.resetvalue = 0 },
{ .name = "TLBI_ALLE3IS", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 6, .crn = 8, .crm = 3, .opc2 = 0,
- .access = PL3_W, .type = ARM_CP_NO_RAW,
+ .access = PL3_W, .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC,
.writefn = tlbi_aa64_alle3is_write },
{ .name = "TLBI_VAE3IS", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 6, .crn = 8, .crm = 3, .opc2 = 1,
- .access = PL3_W, .type = ARM_CP_NO_RAW,
+ .access = PL3_W, .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC,
.writefn = tlbi_aa64_vae3is_write },
{ .name = "TLBI_VALE3IS", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 6, .crn = 8, .crm = 3, .opc2 = 5,
- .access = PL3_W, .type = ARM_CP_NO_RAW,
+ .access = PL3_W, .type = ARM_CP_NO_RAW | ARM_CP_EXIT_PC,
.writefn = tlbi_aa64_vae3is_write },
{ .name = "TLBI_ALLE3", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 6, .crn = 8, .crm = 7, .opc2 = 0,
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* [Qemu-devel] [PATCH v7 26/27] tcg: enable MTTCG by default for ARM on x86 hosts
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (24 preceding siblings ...)
2017-01-19 17:05 ` [Qemu-devel] [PATCH v7 25/27] target-arm: ensure all cross vCPUs TLB flushes complete Alex Bennée
@ 2017-01-19 17:05 ` Alex Bennée
2017-01-20 0:08 ` Pranith Kumar
2017-01-19 17:05 ` [Qemu-devel] [PATCH v7 27/27] target-ppc: take global mutex for set_irq Alex Bennée
26 siblings, 1 reply; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:05 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, open list:ARM
This enables the multi-threaded system emulation by default for ARMv7
and ARMv8 guests using the x86_64 TCG backend. This is because on the
guest side:
- The ARM translate.c/translate-64.c have been converted to
- use MTTCG safe atomic primitives
- emit the appropriate barrier ops
- The ARM machine has been updated to
- hold the BQL when modifying shared cross-vCPU state
- defer cpu_reset to async safe work
All the host backends support the barrier and atomic primitives but
need to provide same-or-better support for normal load/store
operations.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
v7
- drop configure check for backend
- declare backend memory order for x86
- declare guest memory order for ARM
- add configure snippet to set TARGET_SUPPORTS_MTTCG
---
configure | 6 ++++++
target/arm/cpu.h | 3 +++
tcg/i386/tcg-target.h | 16 ++++++++++++++++
3 files changed, 25 insertions(+)
diff --git a/configure b/configure
index 17d52cdd74..a23245fdf4 100755
--- a/configure
+++ b/configure
@@ -5881,6 +5881,7 @@ mkdir -p $target_dir
echo "# Automatically generated by configure - do not modify" > $config_target_mak
bflt="no"
+mttcg="no"
interp_prefix1=$(echo "$interp_prefix" | sed "s/%M/$target_name/g")
gdb_xml_files=""
@@ -5899,11 +5900,13 @@ case "$target_name" in
arm|armeb)
TARGET_ARCH=arm
bflt="yes"
+ mttcg="yes"
gdb_xml_files="arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
;;
aarch64)
TARGET_BASE_ARCH=arm
bflt="yes"
+ mttcg="yes"
gdb_xml_files="aarch64-core.xml aarch64-fpu.xml arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
;;
cris)
@@ -6055,6 +6058,9 @@ if test "$target_bigendian" = "yes" ; then
fi
if test "$target_softmmu" = "yes" ; then
echo "CONFIG_SOFTMMU=y" >> $config_target_mak
+ if test "$mttcg" = "yes" ; then
+ echo "TARGET_SUPPORTS_MTTCG=y" >> $config_target_mak
+ fi
fi
if test "$target_user_only" = "yes" ; then
echo "CONFIG_USER_ONLY=y" >> $config_target_mak
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 29d15fc522..659e246a54 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -29,6 +29,9 @@
# define TARGET_LONG_BITS 32
#endif
+/* ARM processors have a weak memory model */
+#define TCG_DEFAULT_MO (0)
+
#define CPUArchState struct CPUARMState
#include "qemu-common.h"
diff --git a/tcg/i386/tcg-target.h b/tcg/i386/tcg-target.h
index 21d96ec35c..536190f647 100644
--- a/tcg/i386/tcg-target.h
+++ b/tcg/i386/tcg-target.h
@@ -165,4 +165,20 @@ static inline void flush_icache_range(uintptr_t start, uintptr_t stop)
{
}
+/* This defines the natural memory order supported by this
+ * architecture before guarantees made by various barrier
+ * instructions.
+ *
+ * The x86 has a pretty strong memory ordering which only really
+ * allows for some stores to be re-ordered after loads.
+ */
+#include "tcg-mo.h"
+
+static inline int get_tcg_target_mo(void)
+{
+ return TCG_MO_ALL & ~TCG_MO_LD_ST;
+}
+
+#define TCG_TARGET_DEFAULT_MO get_tcg_target_mo()
+
#endif
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread* Re: [Qemu-devel] [PATCH v7 26/27] tcg: enable MTTCG by default for ARM on x86 hosts
2017-01-19 17:05 ` [Qemu-devel] [PATCH v7 26/27] tcg: enable MTTCG by default for ARM on x86 hosts Alex Bennée
@ 2017-01-20 0:08 ` Pranith Kumar
2017-01-20 10:53 ` Alex Bennée
0 siblings, 1 reply; 51+ messages in thread
From: Pranith Kumar @ 2017-01-20 0:08 UTC (permalink / raw)
To: Alex Bennée
Cc: mttcg, qemu-devel, fred.konrad, a.rigo, cota, nikunj,
mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian, open list:ARM
Alex Bennée writes:
> This enables the multi-threaded system emulation by default for ARMv7
> and ARMv8 guests using the x86_64 TCG backend. This is because on the
> guest side:
>
> - The ARM translate.c/translate-64.c have been converted to
> - use MTTCG safe atomic primitives
> - emit the appropriate barrier ops
> - The ARM machine has been updated to
> - hold the BQL when modifying shared cross-vCPU state
> - defer cpu_reset to async safe work
>
> All the host backends support the barrier and atomic primitives but
> need to provide same-or-better support for normal load/store
> operations.
>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
<snip>
>
> +/* This defines the natural memory order supported by this
> + * architecture before guarantees made by various barrier
> + * instructions.
> + *
> + * The x86 has a pretty strong memory ordering which only really
> + * allows for some stores to be re-ordered after loads.
> + */
> +#include "tcg-mo.h"
> +
> +static inline int get_tcg_target_mo(void)
> +{
> + return TCG_MO_ALL & ~TCG_MO_LD_ST;
> +}
> +
Shouldn't this be TCG_MO_ALL & ~TCG_MO_ST_LD?
Thanks,
--
Pranith
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: [Qemu-devel] [PATCH v7 26/27] tcg: enable MTTCG by default for ARM on x86 hosts
2017-01-20 0:08 ` Pranith Kumar
@ 2017-01-20 10:53 ` Alex Bennée
2017-01-20 14:30 ` Pranith Kumar
0 siblings, 1 reply; 51+ messages in thread
From: Alex Bennée @ 2017-01-20 10:53 UTC (permalink / raw)
To: Pranith Kumar
Cc: mttcg, qemu-devel, fred.konrad, a.rigo, cota, nikunj,
mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian, open list:ARM
Pranith Kumar <bobby.prani@gmail.com> writes:
> Alex Bennée writes:
>
>> This enables the multi-threaded system emulation by default for ARMv7
>> and ARMv8 guests using the x86_64 TCG backend. This is because on the
>> guest side:
>>
>> - The ARM translate.c/translate-64.c have been converted to
>> - use MTTCG safe atomic primitives
>> - emit the appropriate barrier ops
>> - The ARM machine has been updated to
>> - hold the BQL when modifying shared cross-vCPU state
>> - defer cpu_reset to async safe work
>>
>> All the host backends support the barrier and atomic primitives but
>> need to provide same-or-better support for normal load/store
>> operations.
>>
>> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
>
> <snip>
>
>>
>> +/* This defines the natural memory order supported by this
>> + * architecture before guarantees made by various barrier
>> + * instructions.
>> + *
>> + * The x86 has a pretty strong memory ordering which only really
>> + * allows for some stores to be re-ordered after loads.
>> + */
>> +#include "tcg-mo.h"
>> +
>> +static inline int get_tcg_target_mo(void)
>> +{
>> + return TCG_MO_ALL & ~TCG_MO_LD_ST;
>> +}
>> +
>
> Shouldn't this be TCG_MO_ALL & ~TCG_MO_ST_LD?
The case that x86 doesn't handle normally is store-after-load which is
what I assumed TCG_MO_LD_ST was. Perhaps we need some better comments
for each of the enums?
>
> Thanks,
--
Alex Bennée
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: [Qemu-devel] [PATCH v7 26/27] tcg: enable MTTCG by default for ARM on x86 hosts
2017-01-20 10:53 ` Alex Bennée
@ 2017-01-20 14:30 ` Pranith Kumar
0 siblings, 0 replies; 51+ messages in thread
From: Pranith Kumar @ 2017-01-20 14:30 UTC (permalink / raw)
To: Alex Bennée
Cc: MTTCG Devel, qemu-devel, KONRAD Frédéric, alvise rigo,
Emilio G. Cota, nikunj, Mark Burton, Paolo Bonzini, Jan Kiszka,
Sergey Fedorov, Richard Henderson, Peter Maydell,
Claudio Fontana, Bamvor Zhang Jian, open list:ARM
On Fri, Jan 20, 2017 at 5:53 AM, Alex Bennée <alex.bennee@linaro.org> wrote:
>
> The case that x86 doesn't handle normally is store-after-load which is
> what I assumed TCG_MO_LD_ST was. Perhaps we need some better comments
> for each of the enums?
>
OK. The enum is of the form TCG_MO_A_B, where A and B are in program
order. So x86 will be TCG_MO_ST_LD, i.e., a load following a store is
re-ordered before the store.
I'll send a patch adding this comment.
Thanks,
--
Pranith
^ permalink raw reply [flat|nested] 51+ messages in thread
* [Qemu-devel] [PATCH v7 27/27] target-ppc: take global mutex for set_irq
2017-01-19 17:04 [Qemu-devel] [PATCH v7 00/27] Remaining MTTCG Base patches and ARM enablement Alex Bennée
` (25 preceding siblings ...)
2017-01-19 17:05 ` [Qemu-devel] [PATCH v7 26/27] tcg: enable MTTCG by default for ARM on x86 hosts Alex Bennée
@ 2017-01-19 17:05 ` Alex Bennée
26 siblings, 0 replies; 51+ messages in thread
From: Alex Bennée @ 2017-01-19 17:05 UTC (permalink / raw)
To: mttcg, qemu-devel, fred.konrad, a.rigo, cota, bobby.prani, nikunj
Cc: mark.burton, pbonzini, jan.kiszka, serge.fdrv, rth,
peter.maydell, claudio.fontana, bamvor.zhangjian,
Alex Bennée, David Gibson, Alexander Graf,
open list:PowerPC
We have to do this conditionally as the reset paths can trigger IRQ
setting when the machine is first brought up.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/ppc/ppc.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/hw/ppc/ppc.c b/hw/ppc/ppc.c
index 8945869009..59c3faa6c8 100644
--- a/hw/ppc/ppc.c
+++ b/hw/ppc/ppc.c
@@ -62,7 +62,16 @@ void ppc_set_irq(PowerPCCPU *cpu, int n_IRQ, int level)
{
CPUState *cs = CPU(cpu);
CPUPPCState *env = &cpu->env;
- unsigned int old_pending = env->pending_interrupts;
+ unsigned int old_pending;
+ bool locked = false;
+
+ /* We may already have the BQL if coming from the reset path */
+ if (!qemu_mutex_iothread_locked()) {
+ locked = true;
+ qemu_mutex_lock_iothread();
+ }
+
+ old_pending = env->pending_interrupts;
if (level) {
env->pending_interrupts |= 1 << n_IRQ;
@@ -80,9 +89,14 @@ void ppc_set_irq(PowerPCCPU *cpu, int n_IRQ, int level)
#endif
}
+
LOG_IRQ("%s: %p n_IRQ %d level %d => pending %08" PRIx32
"req %08x\n", __func__, env, n_IRQ, level,
env->pending_interrupts, CPU(cpu)->interrupt_request);
+
+ if (locked) {
+ qemu_mutex_unlock_iothread();
+ }
}
/* PowerPC 6xx / 7xx internal IRQ controller */
--
2.11.0
^ permalink raw reply related [flat|nested] 51+ messages in thread