All of lore.kernel.org
 help / color / mirror / Atom feed
From: Icenowy Zheng <icenowy@aosc.xyz>
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
	Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
	Icenowy Zheng <icenowy@aosc.xyz>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/6] clk: sunxi-ng: add support for V3s CCU
Date: Fri, 20 Jan 2017 01:54:45 +0800	[thread overview]
Message-ID: <20170119175448.11445-3-icenowy@aosc.xyz> (raw)
In-Reply-To: <20170119175448.11445-1-icenowy@aosc.xyz>

V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks
about CSI, are different, which makes it to need a new CCU driver.

Add such a new driver for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
 drivers/clk/sunxi-ng/Kconfig              |  11 +
 drivers/clk/sunxi-ng/Makefile             |   1 +
 drivers/clk/sunxi-ng/ccu-sun8i-v3s.c      | 590 ++++++++++++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun8i-v3s.h      |  63 ++++
 include/dt-bindings/clock/sun8i-v3s-ccu.h | 107 ++++++
 include/dt-bindings/reset/sun8i-v3s-ccu.h |  78 ++++
 6 files changed, 850 insertions(+)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
 create mode 100644 include/dt-bindings/clock/sun8i-v3s-ccu.h
 create mode 100644 include/dt-bindings/reset/sun8i-v3s-ccu.h

diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 8454c6e3dd65..1ca48255802f 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -109,4 +109,15 @@ config SUN8I_H3_CCU
 	select SUNXI_CCU_PHASE
 	default MACH_SUN8I
 
+config SUN8I_V3S_CCU
+	bool "Support for the Allwinner V3s CCU"
+	select SUNXI_CCU_DIV
+	select SUNXI_CCU_NK
+	select SUNXI_CCU_NKM
+	select SUNXI_CCU_NKMP
+	select SUNXI_CCU_NM
+	select SUNXI_CCU_MP
+	select SUNXI_CCU_PHASE
+	default MACH_SUN8I
+
 endif
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 24fbc6e5deb8..d1cd81a0f112 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -23,3 +23,4 @@ obj-$(CONFIG_SUN6I_A31_CCU)	+= ccu-sun6i-a31.o
 obj-$(CONFIG_SUN8I_A23_CCU)	+= ccu-sun8i-a23.o
 obj-$(CONFIG_SUN8I_A33_CCU)	+= ccu-sun8i-a33.o
 obj-$(CONFIG_SUN8I_H3_CCU)	+= ccu-sun8i-h3.o
+obj-$(CONFIG_SUN8I_V3S_CCU)	+= ccu-sun8i-v3s.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
new file mode 100644
index 000000000000..a3f505626878
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
@@ -0,0 +1,590 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on ccu-sun8i-h3.c, which is:
+ * Copyright (c) 2016 Maxime Ripard. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun8i-v3s.h"
+
+static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpu_clk, "pll-cpu",
+				     "osc24M", 0x000,
+				     8, 5,	/* N */
+				     4, 2,	/* K */
+				     0, 2,	/* M */
+				     16, 2,	/* P */
+				     BIT(31),	/* gate */
+				     BIT(28),	/* lock */
+				     0);
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names
+ */
+#define SUN8I_V3S_PLL_AUDIO_REG	0x008
+
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
+				   "osc24M", 0x008,
+				   8, 7,	/* N */
+				   0, 5,	/* M */
+				   BIT(31),	/* gate */
+				   BIT(28),	/* lock */
+				   0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video_clk, "pll-video",
+					"osc24M", 0x0010,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
+					"osc24M", 0x0018,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					0);
+
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr_clk, "pll-ddr",
+				    "osc24M", 0x020,
+				    8, 5,	/* N */
+				    4, 2,	/* K */
+				    0, 2,	/* M */
+				    BIT(31),	/* gate */
+				    BIT(28),	/* lock */
+				    0);
+
+static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph0_clk, "pll-periph0",
+					   "osc24M", 0x028,
+					   8, 5,	/* N */
+					   4, 2,	/* K */
+					   BIT(31),	/* gate */
+					   BIT(28),	/* lock */
+					   2,		/* post-div */
+					   0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_isp_clk, "pll-isp",
+					"osc24M", 0x002c,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					0);
+
+static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph1_clk, "pll-periph1",
+					   "osc24M", 0x044,
+					   8, 5,	/* N */
+					   4, 2,	/* K */
+					   BIT(31),	/* gate */
+					   BIT(28),	/* lock */
+					   2,		/* post-div */
+					   0);
+
+static const char * const cpu_parents[] = { "osc32k", "osc24M",
+					     "pll-cpu", "pll-cpu" };
+static SUNXI_CCU_MUX(cpu_clk, "cpu", cpu_parents,
+		     0x050, 16, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x050, 0, 2, 0);
+
+static const char * const ahb1_parents[] = { "osc32k", "osc24M",
+					     "axi", "pll-periph0" };
+static struct ccu_div ahb1_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+	.mux		= {
+		.shift	= 12,
+		.width	= 2,
+
+		.variable_prediv	= {
+			.index	= 3,
+			.shift	= 6,
+			.width	= 2,
+		},
+	},
+
+	.common		= {
+		.reg		= 0x054,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("ahb1",
+						      ahb1_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static struct clk_div_table apb1_div_table[] = {
+	{ .val = 0, .div = 2 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 8 },
+	{ /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
+			   0x054, 8, 2, apb1_div_table, 0);
+
+static const char * const apb2_parents[] = { "osc32k", "osc24M",
+					     "pll-periph0", "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
+			     0, 5,	/* M */
+			     16, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static const char * const ahb2_parents[] = { "ahb1", "pll-periph0" };
+static const struct ccu_mux_fixed_prediv ahb2_fixed_predivs[] = {
+	{ .index = 1, .div = 2 },
+};
+static struct ccu_mux ahb2_clk = {
+	.mux		= {
+		.shift	= 0,
+		.width	= 1,
+		.fixed_predivs	= ahb2_fixed_predivs,
+		.n_predivs	= ARRAY_SIZE(ahb2_fixed_predivs),
+	},
+
+	.common		= {
+		.reg		= 0x05c,
+		.features	= CCU_FEATURE_FIXED_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("ahb2",
+						      ahb2_parents,
+						      &ccu_mux_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_ce_clk,	"bus-ce",	"ahb1",
+		      0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_dma_clk,	"bus-dma",	"ahb1",
+		      0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_mmc0_clk,	"bus-mmc0",	"ahb1",
+		      0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk,	"bus-mmc1",	"ahb1",
+		      0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk,	"bus-mmc2",	"ahb1",
+		      0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_dram_clk,	"bus-dram",	"ahb1",
+		      0x060, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_emac_clk,	"bus-emac",	"ahb2",
+		      0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_hstimer_clk,	"bus-hstimer",	"ahb1",
+		      0x060, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_spi0_clk,	"bus-spi0",	"ahb1",
+		      0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_otg_clk,	"bus-otg",	"ahb1",
+		      0x060, BIT(24), 0);
+static SUNXI_CCU_GATE(bus_ehci0_clk,	"bus-ehci0",	"ahb1",
+		      0x060, BIT(26), 0);
+static SUNXI_CCU_GATE(bus_ohci0_clk,	"bus-ohci0",	"ahb1",
+		      0x060, BIT(29), 0);
+
+static SUNXI_CCU_GATE(bus_ve_clk,	"bus-ve",	"ahb1",
+		      0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_tcon0_clk,	"bus-tcon0",	"ahb1",
+		      0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_csi_clk,	"bus-csi",	"ahb1",
+		      0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_de_clk,	"bus-de",	"ahb1",
+		      0x064, BIT(12), 0);
+
+static SUNXI_CCU_GATE(bus_codec_clk,	"bus-codec",	"apb1",
+		      0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_pio_clk,	"bus-pio",	"apb1",
+		      0x068, BIT(5), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk,	"bus-i2c0",	"apb2",
+		      0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk,	"bus-i2c1",	"apb2",
+		      0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_uart0_clk,	"bus-uart0",	"apb2",
+		      0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk,	"bus-uart1",	"apb2",
+		      0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk,	"bus-uart2",	"apb2",
+		      0x06c, BIT(18), 0);
+
+static SUNXI_CCU_GATE(bus_ephy_clk,	"bus-ephy",	"ahb1",
+		      0x070, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_dbg_clk,	"bus-dbg",	"ahb1",
+		      0x070, BIT(7), 0);
+
+static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0",
+						     "pll-periph1" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0",
+		       0x088, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0",
+		       0x088, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1",
+		       0x08c, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1",
+		       0x08c, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2_sample", "mmc2",
+		       0x090, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc2_output_clk, "mmc2_output", "mmc2",
+		       0x090, 8, 3, 0);
+
+static const char * const ce_parents[] = { "osc24M", "pll-periph0", };
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x09c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE(usb_phy0_clk,	"usb-phy0",	"osc24M",
+		      0x0cc, BIT(8), 0);
+static SUNXI_CCU_GATE(usb_ohci0_clk,	"usb-ohci0",	"osc24M",
+		      0x0cc, BIT(16), 0);
+
+static const char * const dram_parents[] = { "pll-ddr", "pll-periph0-2x" };
+static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents,
+			    0x0f4, 0, 4, 20, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(dram_ve_clk,	"dram-ve",	"dram",
+		      0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi_clk,	"dram-csi",	"dram",
+		      0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_ehci_clk,	"dram-ehci",	"dram",
+		      0x100, BIT(17), 0);
+static SUNXI_CCU_GATE(dram_ohci_clk,	"dram-ohci",	"dram",
+		      0x100, BIT(18), 0);
+
+static const char * const de_parents[] = { "pll-video", "pll-periph0" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
+				 0x104, 0, 4, 24, 2, BIT(31), 0);
+
+static const char * const tcon_parents[] = { "pll-video" };
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon_clk, "tcon", tcon_parents,
+				 0x118, 0, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_GATE(csi_misc_clk,	"csi-misc",	"osc24M",
+		      0x130, BIT(31), 0);
+
+static const char * const csi_mclk_parents[] = { "osc24M", "pll-video",
+						 "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi0_mclk_clk, "csi0-mclk", csi_mclk_parents,
+				 0x130, 0, 5, 8, 3, BIT(15), 0);
+
+static const char * const csi1_sclk_parents[] = { "pll-video", "pll-isp" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi1_sclk_clk, "csi-sclk", csi1_sclk_parents,
+				 0x134, 16, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(csi1_mclk_clk, "csi-mclk", csi_mclk_parents,
+				 0x134, 0, 5, 8, 3, BIT(15), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
+			     0x13c, 16, 3, BIT(31), 0);
+
+static SUNXI_CCU_GATE(ac_dig_clk,	"ac-dig",	"pll-audio",
+		      0x140, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(avs_clk,		"avs",		"osc24M",
+		      0x144, BIT(31), 0);
+
+static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x", "pll-ddr" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
+				 0x15c, 0, 3, 24, 2, BIT(31), CLK_IS_CRITICAL);
+
+static const char * const mipi_csi_parents[] = { "pll-video", "pll-periph0",
+						 "pll-isp" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mipi_csi_clk, "mipi-csi", mipi_csi_parents,
+			     0x16c, 0, 3, 24, 2, BIT(31), 0);
+
+static struct ccu_common *sun8i_v3s_ccu_clks[] = {
+	&pll_cpu_clk.common,
+	&pll_audio_base_clk.common,
+	&pll_video_clk.common,
+	&pll_ve_clk.common,
+	&pll_ddr_clk.common,
+	&pll_periph0_clk.common,
+	&pll_isp_clk.common,
+	&pll_periph1_clk.common,
+	&cpu_clk.common,
+	&axi_clk.common,
+	&ahb1_clk.common,
+	&apb1_clk.common,
+	&apb2_clk.common,
+	&ahb2_clk.common,
+	&bus_ce_clk.common,
+	&bus_dma_clk.common,
+	&bus_mmc0_clk.common,
+	&bus_mmc1_clk.common,
+	&bus_mmc2_clk.common,
+	&bus_dram_clk.common,
+	&bus_emac_clk.common,
+	&bus_hstimer_clk.common,
+	&bus_spi0_clk.common,
+	&bus_otg_clk.common,
+	&bus_ehci0_clk.common,
+	&bus_ohci0_clk.common,
+	&bus_ve_clk.common,
+	&bus_tcon0_clk.common,
+	&bus_csi_clk.common,
+	&bus_de_clk.common,
+	&bus_codec_clk.common,
+	&bus_pio_clk.common,
+	&bus_i2c0_clk.common,
+	&bus_i2c1_clk.common,
+	&bus_uart0_clk.common,
+	&bus_uart1_clk.common,
+	&bus_uart2_clk.common,
+	&bus_ephy_clk.common,
+	&bus_dbg_clk.common,
+	&mmc0_clk.common,
+	&mmc0_sample_clk.common,
+	&mmc0_output_clk.common,
+	&mmc1_clk.common,
+	&mmc1_sample_clk.common,
+	&mmc1_output_clk.common,
+	&mmc2_clk.common,
+	&mmc2_sample_clk.common,
+	&mmc2_output_clk.common,
+	&ce_clk.common,
+	&spi0_clk.common,
+	&usb_phy0_clk.common,
+	&usb_ohci0_clk.common,
+	&dram_clk.common,
+	&dram_ve_clk.common,
+	&dram_csi_clk.common,
+	&dram_ohci_clk.common,
+	&dram_ehci_clk.common,
+	&de_clk.common,
+	&tcon_clk.common,
+	&csi_misc_clk.common,
+	&csi0_mclk_clk.common,
+	&csi1_sclk_clk.common,
+	&csi1_mclk_clk.common,
+	&ve_clk.common,
+	&ac_dig_clk.common,
+	&avs_clk.common,
+	&mbus_clk.common,
+	&mipi_csi_clk.common,
+};
+
+/* We hardcode the divider to 4 for now */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+			"pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+			"pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+			"pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+			"pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x",
+			"pll-periph0", 1, 2, 0);
+
+static struct clk_hw_onecell_data sun8i_v3s_hw_clks = {
+	.hws	= {
+		[CLK_PLL_CPU]		= &pll_cpu_clk.common.hw,
+		[CLK_PLL_AUDIO_BASE]	= &pll_audio_base_clk.common.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.hw,
+		[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.hw,
+		[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.hw,
+		[CLK_PLL_AUDIO_8X]	= &pll_audio_8x_clk.hw,
+		[CLK_PLL_VIDEO]		= &pll_video_clk.common.hw,
+		[CLK_PLL_VE]		= &pll_ve_clk.common.hw,
+		[CLK_PLL_DDR]		= &pll_ddr_clk.common.hw,
+		[CLK_PLL_PERIPH0]	= &pll_periph0_clk.common.hw,
+		[CLK_PLL_PERIPH0_2X]	= &pll_periph0_2x_clk.hw,
+		[CLK_PLL_ISP]		= &pll_isp_clk.common.hw,
+		[CLK_PLL_PERIPH1]	= &pll_periph1_clk.common.hw,
+		[CLK_CPU]		= &cpu_clk.common.hw,
+		[CLK_AXI]		= &axi_clk.common.hw,
+		[CLK_AHB1]		= &ahb1_clk.common.hw,
+		[CLK_APB1]		= &apb1_clk.common.hw,
+		[CLK_APB2]		= &apb2_clk.common.hw,
+		[CLK_AHB2]		= &ahb2_clk.common.hw,
+		[CLK_BUS_CE]		= &bus_ce_clk.common.hw,
+		[CLK_BUS_DMA]		= &bus_dma_clk.common.hw,
+		[CLK_BUS_MMC0]		= &bus_mmc0_clk.common.hw,
+		[CLK_BUS_MMC1]		= &bus_mmc1_clk.common.hw,
+		[CLK_BUS_MMC2]		= &bus_mmc2_clk.common.hw,
+		[CLK_BUS_DRAM]		= &bus_dram_clk.common.hw,
+		[CLK_BUS_EMAC]		= &bus_emac_clk.common.hw,
+		[CLK_BUS_HSTIMER]	= &bus_hstimer_clk.common.hw,
+		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
+		[CLK_BUS_OTG]		= &bus_otg_clk.common.hw,
+		[CLK_BUS_EHCI0]		= &bus_ehci0_clk.common.hw,
+		[CLK_BUS_OHCI0]		= &bus_ohci0_clk.common.hw,
+		[CLK_BUS_VE]		= &bus_ve_clk.common.hw,
+		[CLK_BUS_TCON0]		= &bus_tcon0_clk.common.hw,
+		[CLK_BUS_CSI]		= &bus_csi_clk.common.hw,
+		[CLK_BUS_DE]		= &bus_de_clk.common.hw,
+		[CLK_BUS_CODEC]		= &bus_codec_clk.common.hw,
+		[CLK_BUS_PIO]		= &bus_pio_clk.common.hw,
+		[CLK_BUS_I2C0]		= &bus_i2c0_clk.common.hw,
+		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
+		[CLK_BUS_UART0]		= &bus_uart0_clk.common.hw,
+		[CLK_BUS_UART1]		= &bus_uart1_clk.common.hw,
+		[CLK_BUS_UART2]		= &bus_uart2_clk.common.hw,
+		[CLK_BUS_EPHY]		= &bus_ephy_clk.common.hw,
+		[CLK_BUS_DBG]		= &bus_dbg_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC0_SAMPLE]	= &mmc0_sample_clk.common.hw,
+		[CLK_MMC0_OUTPUT]	= &mmc0_output_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC1_SAMPLE]	= &mmc1_sample_clk.common.hw,
+		[CLK_MMC1_OUTPUT]	= &mmc1_output_clk.common.hw,
+		[CLK_CE]		= &ce_clk.common.hw,
+		[CLK_SPI0]		= &spi0_clk.common.hw,
+		[CLK_USB_PHY0]		= &usb_phy0_clk.common.hw,
+		[CLK_USB_OHCI0]		= &usb_ohci0_clk.common.hw,
+		[CLK_DRAM]		= &dram_clk.common.hw,
+		[CLK_DRAM_VE]		= &dram_ve_clk.common.hw,
+		[CLK_DRAM_CSI]		= &dram_csi_clk.common.hw,
+		[CLK_DRAM_EHCI]		= &dram_ehci_clk.common.hw,
+		[CLK_DRAM_OHCI]		= &dram_ohci_clk.common.hw,
+		[CLK_DE]		= &de_clk.common.hw,
+		[CLK_TCON0]		= &tcon_clk.common.hw,
+		[CLK_CSI_MISC]		= &csi_misc_clk.common.hw,
+		[CLK_CSI0_MCLK]		= &csi0_mclk_clk.common.hw,
+		[CLK_CSI1_SCLK]		= &csi1_sclk_clk.common.hw,
+		[CLK_CSI1_MCLK]		= &csi1_mclk_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_AC_DIG]		= &ac_dig_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_MBUS]		= &mbus_clk.common.hw,
+		[CLK_MIPI_CSI]		= &mipi_csi_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun8i_v3s_ccu_resets[] = {
+	[RST_USB_PHY0]		=  { 0x0cc, BIT(0) },
+
+	[RST_MBUS]		=  { 0x0fc, BIT(31) },
+
+	[RST_BUS_CE]		=  { 0x2c0, BIT(5) },
+	[RST_BUS_DMA]		=  { 0x2c0, BIT(6) },
+	[RST_BUS_MMC0]		=  { 0x2c0, BIT(8) },
+	[RST_BUS_MMC1]		=  { 0x2c0, BIT(9) },
+	[RST_BUS_MMC2]		=  { 0x2c0, BIT(10) },
+	[RST_BUS_DRAM]		=  { 0x2c0, BIT(14) },
+	[RST_BUS_EMAC]		=  { 0x2c0, BIT(17) },
+	[RST_BUS_HSTIMER]	=  { 0x2c0, BIT(19) },
+	[RST_BUS_SPI0]		=  { 0x2c0, BIT(20) },
+	[RST_BUS_OTG]		=  { 0x2c0, BIT(23) },
+	[RST_BUS_EHCI0]		=  { 0x2c0, BIT(26) },
+	[RST_BUS_OHCI0]		=  { 0x2c0, BIT(29) },
+
+	[RST_BUS_VE]		=  { 0x2c4, BIT(0) },
+	[RST_BUS_TCON0]		=  { 0x2c4, BIT(3) },
+	[RST_BUS_CSI]		=  { 0x2c4, BIT(8) },
+	[RST_BUS_DE]		=  { 0x2c4, BIT(12) },
+	[RST_BUS_DBG]		=  { 0x2c4, BIT(31) },
+
+	[RST_BUS_EPHY]		=  { 0x2c8, BIT(2) },
+
+	[RST_BUS_CODEC]		=  { 0x2d0, BIT(0) },
+
+	[RST_BUS_I2C0]		=  { 0x2d8, BIT(0) },
+	[RST_BUS_I2C1]		=  { 0x2d8, BIT(1) },
+	[RST_BUS_UART0]		=  { 0x2d8, BIT(16) },
+	[RST_BUS_UART1]		=  { 0x2d8, BIT(17) },
+	[RST_BUS_UART2]		=  { 0x2d8, BIT(18) },
+};
+
+static const struct sunxi_ccu_desc sun8i_v3s_ccu_desc = {
+	.ccu_clks	= sun8i_v3s_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun8i_v3s_ccu_clks),
+
+	.hw_clks	= &sun8i_v3s_hw_clks,
+
+	.resets		= sun8i_v3s_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun8i_v3s_ccu_resets),
+};
+
+static void __init sun8i_v3s_ccu_setup(struct device_node *node)
+{
+	void __iomem *reg;
+	u32 val;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("%s: Could not map the clock registers\n",
+		       of_node_full_name(node));
+		return;
+	}
+
+	/* Force the PLL-Audio-1x divider to 4 */
+	val = readl(reg + SUN8I_V3S_PLL_AUDIO_REG);
+	val &= ~GENMASK(19, 16);
+	writel(val | (3 << 16), reg + SUN8I_V3S_PLL_AUDIO_REG);
+
+	sunxi_ccu_probe(node, reg, &sun8i_v3s_ccu_desc);
+}
+CLK_OF_DECLARE(sun8i_v3s_ccu, "allwinner,sun8i-v3s-ccu",
+	       sun8i_v3s_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
new file mode 100644
index 000000000000..4a4d36fdad96
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on ccu-sun8i-h3.h, which is:
+ * Copyright (c) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN8I_H3_H_
+#define _CCU_SUN8I_H3_H_
+
+#include <dt-bindings/clock/sun8i-v3s-ccu.h>
+#include <dt-bindings/reset/sun8i-v3s-ccu.h>
+
+#define CLK_PLL_CPU		0
+#define CLK_PLL_AUDIO_BASE	1
+#define CLK_PLL_AUDIO		2
+#define CLK_PLL_AUDIO_2X	3
+#define CLK_PLL_AUDIO_4X	4
+#define CLK_PLL_AUDIO_8X	5
+#define CLK_PLL_VIDEO		6
+#define CLK_PLL_VE		7
+#define CLK_PLL_DDR		8
+#define CLK_PLL_PERIPH0		9
+#define CLK_PLL_PERIPH0_2X	10
+#define CLK_PLL_ISP		11
+#define CLK_PLL_PERIPH1		12
+/* Reserve one number for not implemented and not used PLL_DDR1 */
+
+/* The CPU clock is exported */
+
+#define CLK_AXI			15
+#define CLK_AHB1		16
+#define CLK_APB1		17
+#define CLK_APB2		18
+#define CLK_AHB2		19
+
+/* All the bus gates are exported */
+
+/* The first bunch of module clocks are exported */
+
+#define CLK_DRAM		58
+
+/* All the DRAM gates are exported */
+
+/* Some more module clocks are exported */
+
+#define CLK_MBUS		72
+
+/* And the GPU module clock is exported */
+
+#define CLK_NUMBER		(CLK_MIPI_CSI + 1)
+
+#endif /* _CCU_SUN8I_H3_H_ */
diff --git a/include/dt-bindings/clock/sun8i-v3s-ccu.h b/include/dt-bindings/clock/sun8i-v3s-ccu.h
new file mode 100644
index 000000000000..c0d5d5599c87
--- /dev/null
+++ b/include/dt-bindings/clock/sun8i-v3s-ccu.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun8i-h3-ccu.h, which is:
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN8I_V3S_H_
+#define _DT_BINDINGS_CLK_SUN8I_V3S_H_
+
+#define CLK_CPU			14
+
+#define CLK_BUS_CE		20
+#define CLK_BUS_DMA		21
+#define CLK_BUS_MMC0		22
+#define CLK_BUS_MMC1		23
+#define CLK_BUS_MMC2		24
+#define CLK_BUS_DRAM		25
+#define CLK_BUS_EMAC		26
+#define CLK_BUS_HSTIMER		27
+#define CLK_BUS_SPI0		28
+#define CLK_BUS_OTG		29
+#define CLK_BUS_EHCI0		30
+#define CLK_BUS_OHCI0		31
+#define CLK_BUS_VE		32
+#define CLK_BUS_TCON0		33
+#define CLK_BUS_CSI		34
+#define CLK_BUS_DE		35
+#define CLK_BUS_CODEC		36
+#define CLK_BUS_PIO		37
+#define CLK_BUS_I2C0		38
+#define CLK_BUS_I2C1		39
+#define CLK_BUS_UART0		40
+#define CLK_BUS_UART1		41
+#define CLK_BUS_UART2		42
+#define CLK_BUS_EPHY		43
+#define CLK_BUS_DBG		44
+
+#define CLK_MMC0		45
+#define CLK_MMC0_SAMPLE		46
+#define CLK_MMC0_OUTPUT		47
+#define CLK_MMC1		48
+#define CLK_MMC1_SAMPLE		49
+#define CLK_MMC1_OUTPUT		50
+#define CLK_MMC2		51
+#define CLK_MMC2_SAMPLE		52
+#define CLK_MMC2_OUTPUT		53
+#define CLK_CE			54
+#define CLK_SPI0		55
+#define CLK_USB_PHY0		56
+#define CLK_USB_OHCI0		57
+
+#define CLK_DRAM_VE		59
+#define CLK_DRAM_CSI		60
+#define CLK_DRAM_EHCI		61
+#define CLK_DRAM_OHCI		62
+#define CLK_DE			63
+#define CLK_TCON0		64
+#define CLK_CSI_MISC		65
+#define CLK_CSI0_MCLK		66
+#define CLK_CSI1_SCLK		67
+#define CLK_CSI1_MCLK		68
+#define CLK_VE			69
+#define CLK_AC_DIG		70
+#define CLK_AVS			71
+
+#define CLK_MIPI_CSI		73
+
+#endif /* _DT_BINDINGS_CLK_SUN8I_V3S_H_ */
diff --git a/include/dt-bindings/reset/sun8i-v3s-ccu.h b/include/dt-bindings/reset/sun8i-v3s-ccu.h
new file mode 100644
index 000000000000..b58ef21a2e18
--- /dev/null
+++ b/include/dt-bindings/reset/sun8i-v3s-ccu.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun8i-v3s-ccu.h, which is
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN8I_V3S_H_
+#define _DT_BINDINGS_RST_SUN8I_V3S_H_
+
+#define RST_USB_PHY0		0
+
+#define RST_MBUS		1
+
+#define RST_BUS_CE		5
+#define RST_BUS_DMA		6
+#define RST_BUS_MMC0		7
+#define RST_BUS_MMC1		8
+#define RST_BUS_MMC2		9
+#define RST_BUS_DRAM		11
+#define RST_BUS_EMAC		12
+#define RST_BUS_HSTIMER		14
+#define RST_BUS_SPI0		15
+#define RST_BUS_OTG		17
+#define RST_BUS_EHCI0		18
+#define RST_BUS_OHCI0		22
+#define RST_BUS_VE		26
+#define RST_BUS_TCON0		27
+#define RST_BUS_CSI		30
+#define RST_BUS_DE		34
+#define RST_BUS_DBG		38
+#define RST_BUS_EPHY		39
+#define RST_BUS_CODEC		40
+#define RST_BUS_I2C0		46
+#define RST_BUS_I2C1		47
+#define RST_BUS_UART0		49
+#define RST_BUS_UART1		50
+#define RST_BUS_UART2		51
+
+#endif /* _DT_BINDINGS_RST_SUN8I_H3_H_ */
-- 
2.11.0

WARNING: multiple messages have this Message-ID (diff)
From: Icenowy Zheng <icenowy@aosc.xyz>
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
	Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
	Icenowy Zheng <icenowy@aosc.xyz>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/6] clk: sunxi-ng: add support for V3s CCU
Date: Fri, 20 Jan 2017 01:54:45 +0800	[thread overview]
Message-ID: <20170119175448.11445-3-icenowy@aosc.xyz> (raw)
In-Reply-To: <20170119175448.11445-1-icenowy@aosc.xyz>

V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks
about CSI, are different, which makes it to need a new CCU driver.

Add such a new driver for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
 drivers/clk/sunxi-ng/Kconfig              |  11 +
 drivers/clk/sunxi-ng/Makefile             |   1 +
 drivers/clk/sunxi-ng/ccu-sun8i-v3s.c      | 590 ++++++++++++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun8i-v3s.h      |  63 ++++
 include/dt-bindings/clock/sun8i-v3s-ccu.h | 107 ++++++
 include/dt-bindings/reset/sun8i-v3s-ccu.h |  78 ++++
 6 files changed, 850 insertions(+)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
 create mode 100644 include/dt-bindings/clock/sun8i-v3s-ccu.h
 create mode 100644 include/dt-bindings/reset/sun8i-v3s-ccu.h

diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 8454c6e3dd65..1ca48255802f 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -109,4 +109,15 @@ config SUN8I_H3_CCU
 	select SUNXI_CCU_PHASE
 	default MACH_SUN8I
 
+config SUN8I_V3S_CCU
+	bool "Support for the Allwinner V3s CCU"
+	select SUNXI_CCU_DIV
+	select SUNXI_CCU_NK
+	select SUNXI_CCU_NKM
+	select SUNXI_CCU_NKMP
+	select SUNXI_CCU_NM
+	select SUNXI_CCU_MP
+	select SUNXI_CCU_PHASE
+	default MACH_SUN8I
+
 endif
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 24fbc6e5deb8..d1cd81a0f112 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -23,3 +23,4 @@ obj-$(CONFIG_SUN6I_A31_CCU)	+= ccu-sun6i-a31.o
 obj-$(CONFIG_SUN8I_A23_CCU)	+= ccu-sun8i-a23.o
 obj-$(CONFIG_SUN8I_A33_CCU)	+= ccu-sun8i-a33.o
 obj-$(CONFIG_SUN8I_H3_CCU)	+= ccu-sun8i-h3.o
+obj-$(CONFIG_SUN8I_V3S_CCU)	+= ccu-sun8i-v3s.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
new file mode 100644
index 000000000000..a3f505626878
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
@@ -0,0 +1,590 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on ccu-sun8i-h3.c, which is:
+ * Copyright (c) 2016 Maxime Ripard. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun8i-v3s.h"
+
+static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpu_clk, "pll-cpu",
+				     "osc24M", 0x000,
+				     8, 5,	/* N */
+				     4, 2,	/* K */
+				     0, 2,	/* M */
+				     16, 2,	/* P */
+				     BIT(31),	/* gate */
+				     BIT(28),	/* lock */
+				     0);
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names
+ */
+#define SUN8I_V3S_PLL_AUDIO_REG	0x008
+
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
+				   "osc24M", 0x008,
+				   8, 7,	/* N */
+				   0, 5,	/* M */
+				   BIT(31),	/* gate */
+				   BIT(28),	/* lock */
+				   0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video_clk, "pll-video",
+					"osc24M", 0x0010,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
+					"osc24M", 0x0018,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					0);
+
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr_clk, "pll-ddr",
+				    "osc24M", 0x020,
+				    8, 5,	/* N */
+				    4, 2,	/* K */
+				    0, 2,	/* M */
+				    BIT(31),	/* gate */
+				    BIT(28),	/* lock */
+				    0);
+
+static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph0_clk, "pll-periph0",
+					   "osc24M", 0x028,
+					   8, 5,	/* N */
+					   4, 2,	/* K */
+					   BIT(31),	/* gate */
+					   BIT(28),	/* lock */
+					   2,		/* post-div */
+					   0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_isp_clk, "pll-isp",
+					"osc24M", 0x002c,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					0);
+
+static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph1_clk, "pll-periph1",
+					   "osc24M", 0x044,
+					   8, 5,	/* N */
+					   4, 2,	/* K */
+					   BIT(31),	/* gate */
+					   BIT(28),	/* lock */
+					   2,		/* post-div */
+					   0);
+
+static const char * const cpu_parents[] = { "osc32k", "osc24M",
+					     "pll-cpu", "pll-cpu" };
+static SUNXI_CCU_MUX(cpu_clk, "cpu", cpu_parents,
+		     0x050, 16, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x050, 0, 2, 0);
+
+static const char * const ahb1_parents[] = { "osc32k", "osc24M",
+					     "axi", "pll-periph0" };
+static struct ccu_div ahb1_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+	.mux		= {
+		.shift	= 12,
+		.width	= 2,
+
+		.variable_prediv	= {
+			.index	= 3,
+			.shift	= 6,
+			.width	= 2,
+		},
+	},
+
+	.common		= {
+		.reg		= 0x054,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("ahb1",
+						      ahb1_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static struct clk_div_table apb1_div_table[] = {
+	{ .val = 0, .div = 2 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 8 },
+	{ /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
+			   0x054, 8, 2, apb1_div_table, 0);
+
+static const char * const apb2_parents[] = { "osc32k", "osc24M",
+					     "pll-periph0", "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
+			     0, 5,	/* M */
+			     16, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static const char * const ahb2_parents[] = { "ahb1", "pll-periph0" };
+static const struct ccu_mux_fixed_prediv ahb2_fixed_predivs[] = {
+	{ .index = 1, .div = 2 },
+};
+static struct ccu_mux ahb2_clk = {
+	.mux		= {
+		.shift	= 0,
+		.width	= 1,
+		.fixed_predivs	= ahb2_fixed_predivs,
+		.n_predivs	= ARRAY_SIZE(ahb2_fixed_predivs),
+	},
+
+	.common		= {
+		.reg		= 0x05c,
+		.features	= CCU_FEATURE_FIXED_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("ahb2",
+						      ahb2_parents,
+						      &ccu_mux_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_ce_clk,	"bus-ce",	"ahb1",
+		      0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_dma_clk,	"bus-dma",	"ahb1",
+		      0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_mmc0_clk,	"bus-mmc0",	"ahb1",
+		      0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk,	"bus-mmc1",	"ahb1",
+		      0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk,	"bus-mmc2",	"ahb1",
+		      0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_dram_clk,	"bus-dram",	"ahb1",
+		      0x060, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_emac_clk,	"bus-emac",	"ahb2",
+		      0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_hstimer_clk,	"bus-hstimer",	"ahb1",
+		      0x060, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_spi0_clk,	"bus-spi0",	"ahb1",
+		      0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_otg_clk,	"bus-otg",	"ahb1",
+		      0x060, BIT(24), 0);
+static SUNXI_CCU_GATE(bus_ehci0_clk,	"bus-ehci0",	"ahb1",
+		      0x060, BIT(26), 0);
+static SUNXI_CCU_GATE(bus_ohci0_clk,	"bus-ohci0",	"ahb1",
+		      0x060, BIT(29), 0);
+
+static SUNXI_CCU_GATE(bus_ve_clk,	"bus-ve",	"ahb1",
+		      0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_tcon0_clk,	"bus-tcon0",	"ahb1",
+		      0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_csi_clk,	"bus-csi",	"ahb1",
+		      0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_de_clk,	"bus-de",	"ahb1",
+		      0x064, BIT(12), 0);
+
+static SUNXI_CCU_GATE(bus_codec_clk,	"bus-codec",	"apb1",
+		      0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_pio_clk,	"bus-pio",	"apb1",
+		      0x068, BIT(5), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk,	"bus-i2c0",	"apb2",
+		      0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk,	"bus-i2c1",	"apb2",
+		      0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_uart0_clk,	"bus-uart0",	"apb2",
+		      0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk,	"bus-uart1",	"apb2",
+		      0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk,	"bus-uart2",	"apb2",
+		      0x06c, BIT(18), 0);
+
+static SUNXI_CCU_GATE(bus_ephy_clk,	"bus-ephy",	"ahb1",
+		      0x070, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_dbg_clk,	"bus-dbg",	"ahb1",
+		      0x070, BIT(7), 0);
+
+static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0",
+						     "pll-periph1" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0",
+		       0x088, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0",
+		       0x088, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1",
+		       0x08c, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1",
+		       0x08c, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2_sample", "mmc2",
+		       0x090, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc2_output_clk, "mmc2_output", "mmc2",
+		       0x090, 8, 3, 0);
+
+static const char * const ce_parents[] = { "osc24M", "pll-periph0", };
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x09c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE(usb_phy0_clk,	"usb-phy0",	"osc24M",
+		      0x0cc, BIT(8), 0);
+static SUNXI_CCU_GATE(usb_ohci0_clk,	"usb-ohci0",	"osc24M",
+		      0x0cc, BIT(16), 0);
+
+static const char * const dram_parents[] = { "pll-ddr", "pll-periph0-2x" };
+static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents,
+			    0x0f4, 0, 4, 20, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(dram_ve_clk,	"dram-ve",	"dram",
+		      0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi_clk,	"dram-csi",	"dram",
+		      0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_ehci_clk,	"dram-ehci",	"dram",
+		      0x100, BIT(17), 0);
+static SUNXI_CCU_GATE(dram_ohci_clk,	"dram-ohci",	"dram",
+		      0x100, BIT(18), 0);
+
+static const char * const de_parents[] = { "pll-video", "pll-periph0" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
+				 0x104, 0, 4, 24, 2, BIT(31), 0);
+
+static const char * const tcon_parents[] = { "pll-video" };
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon_clk, "tcon", tcon_parents,
+				 0x118, 0, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_GATE(csi_misc_clk,	"csi-misc",	"osc24M",
+		      0x130, BIT(31), 0);
+
+static const char * const csi_mclk_parents[] = { "osc24M", "pll-video",
+						 "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi0_mclk_clk, "csi0-mclk", csi_mclk_parents,
+				 0x130, 0, 5, 8, 3, BIT(15), 0);
+
+static const char * const csi1_sclk_parents[] = { "pll-video", "pll-isp" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi1_sclk_clk, "csi-sclk", csi1_sclk_parents,
+				 0x134, 16, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(csi1_mclk_clk, "csi-mclk", csi_mclk_parents,
+				 0x134, 0, 5, 8, 3, BIT(15), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
+			     0x13c, 16, 3, BIT(31), 0);
+
+static SUNXI_CCU_GATE(ac_dig_clk,	"ac-dig",	"pll-audio",
+		      0x140, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(avs_clk,		"avs",		"osc24M",
+		      0x144, BIT(31), 0);
+
+static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x", "pll-ddr" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
+				 0x15c, 0, 3, 24, 2, BIT(31), CLK_IS_CRITICAL);
+
+static const char * const mipi_csi_parents[] = { "pll-video", "pll-periph0",
+						 "pll-isp" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mipi_csi_clk, "mipi-csi", mipi_csi_parents,
+			     0x16c, 0, 3, 24, 2, BIT(31), 0);
+
+static struct ccu_common *sun8i_v3s_ccu_clks[] = {
+	&pll_cpu_clk.common,
+	&pll_audio_base_clk.common,
+	&pll_video_clk.common,
+	&pll_ve_clk.common,
+	&pll_ddr_clk.common,
+	&pll_periph0_clk.common,
+	&pll_isp_clk.common,
+	&pll_periph1_clk.common,
+	&cpu_clk.common,
+	&axi_clk.common,
+	&ahb1_clk.common,
+	&apb1_clk.common,
+	&apb2_clk.common,
+	&ahb2_clk.common,
+	&bus_ce_clk.common,
+	&bus_dma_clk.common,
+	&bus_mmc0_clk.common,
+	&bus_mmc1_clk.common,
+	&bus_mmc2_clk.common,
+	&bus_dram_clk.common,
+	&bus_emac_clk.common,
+	&bus_hstimer_clk.common,
+	&bus_spi0_clk.common,
+	&bus_otg_clk.common,
+	&bus_ehci0_clk.common,
+	&bus_ohci0_clk.common,
+	&bus_ve_clk.common,
+	&bus_tcon0_clk.common,
+	&bus_csi_clk.common,
+	&bus_de_clk.common,
+	&bus_codec_clk.common,
+	&bus_pio_clk.common,
+	&bus_i2c0_clk.common,
+	&bus_i2c1_clk.common,
+	&bus_uart0_clk.common,
+	&bus_uart1_clk.common,
+	&bus_uart2_clk.common,
+	&bus_ephy_clk.common,
+	&bus_dbg_clk.common,
+	&mmc0_clk.common,
+	&mmc0_sample_clk.common,
+	&mmc0_output_clk.common,
+	&mmc1_clk.common,
+	&mmc1_sample_clk.common,
+	&mmc1_output_clk.common,
+	&mmc2_clk.common,
+	&mmc2_sample_clk.common,
+	&mmc2_output_clk.common,
+	&ce_clk.common,
+	&spi0_clk.common,
+	&usb_phy0_clk.common,
+	&usb_ohci0_clk.common,
+	&dram_clk.common,
+	&dram_ve_clk.common,
+	&dram_csi_clk.common,
+	&dram_ohci_clk.common,
+	&dram_ehci_clk.common,
+	&de_clk.common,
+	&tcon_clk.common,
+	&csi_misc_clk.common,
+	&csi0_mclk_clk.common,
+	&csi1_sclk_clk.common,
+	&csi1_mclk_clk.common,
+	&ve_clk.common,
+	&ac_dig_clk.common,
+	&avs_clk.common,
+	&mbus_clk.common,
+	&mipi_csi_clk.common,
+};
+
+/* We hardcode the divider to 4 for now */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+			"pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+			"pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+			"pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+			"pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x",
+			"pll-periph0", 1, 2, 0);
+
+static struct clk_hw_onecell_data sun8i_v3s_hw_clks = {
+	.hws	= {
+		[CLK_PLL_CPU]		= &pll_cpu_clk.common.hw,
+		[CLK_PLL_AUDIO_BASE]	= &pll_audio_base_clk.common.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.hw,
+		[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.hw,
+		[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.hw,
+		[CLK_PLL_AUDIO_8X]	= &pll_audio_8x_clk.hw,
+		[CLK_PLL_VIDEO]		= &pll_video_clk.common.hw,
+		[CLK_PLL_VE]		= &pll_ve_clk.common.hw,
+		[CLK_PLL_DDR]		= &pll_ddr_clk.common.hw,
+		[CLK_PLL_PERIPH0]	= &pll_periph0_clk.common.hw,
+		[CLK_PLL_PERIPH0_2X]	= &pll_periph0_2x_clk.hw,
+		[CLK_PLL_ISP]		= &pll_isp_clk.common.hw,
+		[CLK_PLL_PERIPH1]	= &pll_periph1_clk.common.hw,
+		[CLK_CPU]		= &cpu_clk.common.hw,
+		[CLK_AXI]		= &axi_clk.common.hw,
+		[CLK_AHB1]		= &ahb1_clk.common.hw,
+		[CLK_APB1]		= &apb1_clk.common.hw,
+		[CLK_APB2]		= &apb2_clk.common.hw,
+		[CLK_AHB2]		= &ahb2_clk.common.hw,
+		[CLK_BUS_CE]		= &bus_ce_clk.common.hw,
+		[CLK_BUS_DMA]		= &bus_dma_clk.common.hw,
+		[CLK_BUS_MMC0]		= &bus_mmc0_clk.common.hw,
+		[CLK_BUS_MMC1]		= &bus_mmc1_clk.common.hw,
+		[CLK_BUS_MMC2]		= &bus_mmc2_clk.common.hw,
+		[CLK_BUS_DRAM]		= &bus_dram_clk.common.hw,
+		[CLK_BUS_EMAC]		= &bus_emac_clk.common.hw,
+		[CLK_BUS_HSTIMER]	= &bus_hstimer_clk.common.hw,
+		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
+		[CLK_BUS_OTG]		= &bus_otg_clk.common.hw,
+		[CLK_BUS_EHCI0]		= &bus_ehci0_clk.common.hw,
+		[CLK_BUS_OHCI0]		= &bus_ohci0_clk.common.hw,
+		[CLK_BUS_VE]		= &bus_ve_clk.common.hw,
+		[CLK_BUS_TCON0]		= &bus_tcon0_clk.common.hw,
+		[CLK_BUS_CSI]		= &bus_csi_clk.common.hw,
+		[CLK_BUS_DE]		= &bus_de_clk.common.hw,
+		[CLK_BUS_CODEC]		= &bus_codec_clk.common.hw,
+		[CLK_BUS_PIO]		= &bus_pio_clk.common.hw,
+		[CLK_BUS_I2C0]		= &bus_i2c0_clk.common.hw,
+		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
+		[CLK_BUS_UART0]		= &bus_uart0_clk.common.hw,
+		[CLK_BUS_UART1]		= &bus_uart1_clk.common.hw,
+		[CLK_BUS_UART2]		= &bus_uart2_clk.common.hw,
+		[CLK_BUS_EPHY]		= &bus_ephy_clk.common.hw,
+		[CLK_BUS_DBG]		= &bus_dbg_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC0_SAMPLE]	= &mmc0_sample_clk.common.hw,
+		[CLK_MMC0_OUTPUT]	= &mmc0_output_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC1_SAMPLE]	= &mmc1_sample_clk.common.hw,
+		[CLK_MMC1_OUTPUT]	= &mmc1_output_clk.common.hw,
+		[CLK_CE]		= &ce_clk.common.hw,
+		[CLK_SPI0]		= &spi0_clk.common.hw,
+		[CLK_USB_PHY0]		= &usb_phy0_clk.common.hw,
+		[CLK_USB_OHCI0]		= &usb_ohci0_clk.common.hw,
+		[CLK_DRAM]		= &dram_clk.common.hw,
+		[CLK_DRAM_VE]		= &dram_ve_clk.common.hw,
+		[CLK_DRAM_CSI]		= &dram_csi_clk.common.hw,
+		[CLK_DRAM_EHCI]		= &dram_ehci_clk.common.hw,
+		[CLK_DRAM_OHCI]		= &dram_ohci_clk.common.hw,
+		[CLK_DE]		= &de_clk.common.hw,
+		[CLK_TCON0]		= &tcon_clk.common.hw,
+		[CLK_CSI_MISC]		= &csi_misc_clk.common.hw,
+		[CLK_CSI0_MCLK]		= &csi0_mclk_clk.common.hw,
+		[CLK_CSI1_SCLK]		= &csi1_sclk_clk.common.hw,
+		[CLK_CSI1_MCLK]		= &csi1_mclk_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_AC_DIG]		= &ac_dig_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_MBUS]		= &mbus_clk.common.hw,
+		[CLK_MIPI_CSI]		= &mipi_csi_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun8i_v3s_ccu_resets[] = {
+	[RST_USB_PHY0]		=  { 0x0cc, BIT(0) },
+
+	[RST_MBUS]		=  { 0x0fc, BIT(31) },
+
+	[RST_BUS_CE]		=  { 0x2c0, BIT(5) },
+	[RST_BUS_DMA]		=  { 0x2c0, BIT(6) },
+	[RST_BUS_MMC0]		=  { 0x2c0, BIT(8) },
+	[RST_BUS_MMC1]		=  { 0x2c0, BIT(9) },
+	[RST_BUS_MMC2]		=  { 0x2c0, BIT(10) },
+	[RST_BUS_DRAM]		=  { 0x2c0, BIT(14) },
+	[RST_BUS_EMAC]		=  { 0x2c0, BIT(17) },
+	[RST_BUS_HSTIMER]	=  { 0x2c0, BIT(19) },
+	[RST_BUS_SPI0]		=  { 0x2c0, BIT(20) },
+	[RST_BUS_OTG]		=  { 0x2c0, BIT(23) },
+	[RST_BUS_EHCI0]		=  { 0x2c0, BIT(26) },
+	[RST_BUS_OHCI0]		=  { 0x2c0, BIT(29) },
+
+	[RST_BUS_VE]		=  { 0x2c4, BIT(0) },
+	[RST_BUS_TCON0]		=  { 0x2c4, BIT(3) },
+	[RST_BUS_CSI]		=  { 0x2c4, BIT(8) },
+	[RST_BUS_DE]		=  { 0x2c4, BIT(12) },
+	[RST_BUS_DBG]		=  { 0x2c4, BIT(31) },
+
+	[RST_BUS_EPHY]		=  { 0x2c8, BIT(2) },
+
+	[RST_BUS_CODEC]		=  { 0x2d0, BIT(0) },
+
+	[RST_BUS_I2C0]		=  { 0x2d8, BIT(0) },
+	[RST_BUS_I2C1]		=  { 0x2d8, BIT(1) },
+	[RST_BUS_UART0]		=  { 0x2d8, BIT(16) },
+	[RST_BUS_UART1]		=  { 0x2d8, BIT(17) },
+	[RST_BUS_UART2]		=  { 0x2d8, BIT(18) },
+};
+
+static const struct sunxi_ccu_desc sun8i_v3s_ccu_desc = {
+	.ccu_clks	= sun8i_v3s_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun8i_v3s_ccu_clks),
+
+	.hw_clks	= &sun8i_v3s_hw_clks,
+
+	.resets		= sun8i_v3s_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun8i_v3s_ccu_resets),
+};
+
+static void __init sun8i_v3s_ccu_setup(struct device_node *node)
+{
+	void __iomem *reg;
+	u32 val;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("%s: Could not map the clock registers\n",
+		       of_node_full_name(node));
+		return;
+	}
+
+	/* Force the PLL-Audio-1x divider to 4 */
+	val = readl(reg + SUN8I_V3S_PLL_AUDIO_REG);
+	val &= ~GENMASK(19, 16);
+	writel(val | (3 << 16), reg + SUN8I_V3S_PLL_AUDIO_REG);
+
+	sunxi_ccu_probe(node, reg, &sun8i_v3s_ccu_desc);
+}
+CLK_OF_DECLARE(sun8i_v3s_ccu, "allwinner,sun8i-v3s-ccu",
+	       sun8i_v3s_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
new file mode 100644
index 000000000000..4a4d36fdad96
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on ccu-sun8i-h3.h, which is:
+ * Copyright (c) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN8I_H3_H_
+#define _CCU_SUN8I_H3_H_
+
+#include <dt-bindings/clock/sun8i-v3s-ccu.h>
+#include <dt-bindings/reset/sun8i-v3s-ccu.h>
+
+#define CLK_PLL_CPU		0
+#define CLK_PLL_AUDIO_BASE	1
+#define CLK_PLL_AUDIO		2
+#define CLK_PLL_AUDIO_2X	3
+#define CLK_PLL_AUDIO_4X	4
+#define CLK_PLL_AUDIO_8X	5
+#define CLK_PLL_VIDEO		6
+#define CLK_PLL_VE		7
+#define CLK_PLL_DDR		8
+#define CLK_PLL_PERIPH0		9
+#define CLK_PLL_PERIPH0_2X	10
+#define CLK_PLL_ISP		11
+#define CLK_PLL_PERIPH1		12
+/* Reserve one number for not implemented and not used PLL_DDR1 */
+
+/* The CPU clock is exported */
+
+#define CLK_AXI			15
+#define CLK_AHB1		16
+#define CLK_APB1		17
+#define CLK_APB2		18
+#define CLK_AHB2		19
+
+/* All the bus gates are exported */
+
+/* The first bunch of module clocks are exported */
+
+#define CLK_DRAM		58
+
+/* All the DRAM gates are exported */
+
+/* Some more module clocks are exported */
+
+#define CLK_MBUS		72
+
+/* And the GPU module clock is exported */
+
+#define CLK_NUMBER		(CLK_MIPI_CSI + 1)
+
+#endif /* _CCU_SUN8I_H3_H_ */
diff --git a/include/dt-bindings/clock/sun8i-v3s-ccu.h b/include/dt-bindings/clock/sun8i-v3s-ccu.h
new file mode 100644
index 000000000000..c0d5d5599c87
--- /dev/null
+++ b/include/dt-bindings/clock/sun8i-v3s-ccu.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun8i-h3-ccu.h, which is:
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN8I_V3S_H_
+#define _DT_BINDINGS_CLK_SUN8I_V3S_H_
+
+#define CLK_CPU			14
+
+#define CLK_BUS_CE		20
+#define CLK_BUS_DMA		21
+#define CLK_BUS_MMC0		22
+#define CLK_BUS_MMC1		23
+#define CLK_BUS_MMC2		24
+#define CLK_BUS_DRAM		25
+#define CLK_BUS_EMAC		26
+#define CLK_BUS_HSTIMER		27
+#define CLK_BUS_SPI0		28
+#define CLK_BUS_OTG		29
+#define CLK_BUS_EHCI0		30
+#define CLK_BUS_OHCI0		31
+#define CLK_BUS_VE		32
+#define CLK_BUS_TCON0		33
+#define CLK_BUS_CSI		34
+#define CLK_BUS_DE		35
+#define CLK_BUS_CODEC		36
+#define CLK_BUS_PIO		37
+#define CLK_BUS_I2C0		38
+#define CLK_BUS_I2C1		39
+#define CLK_BUS_UART0		40
+#define CLK_BUS_UART1		41
+#define CLK_BUS_UART2		42
+#define CLK_BUS_EPHY		43
+#define CLK_BUS_DBG		44
+
+#define CLK_MMC0		45
+#define CLK_MMC0_SAMPLE		46
+#define CLK_MMC0_OUTPUT		47
+#define CLK_MMC1		48
+#define CLK_MMC1_SAMPLE		49
+#define CLK_MMC1_OUTPUT		50
+#define CLK_MMC2		51
+#define CLK_MMC2_SAMPLE		52
+#define CLK_MMC2_OUTPUT		53
+#define CLK_CE			54
+#define CLK_SPI0		55
+#define CLK_USB_PHY0		56
+#define CLK_USB_OHCI0		57
+
+#define CLK_DRAM_VE		59
+#define CLK_DRAM_CSI		60
+#define CLK_DRAM_EHCI		61
+#define CLK_DRAM_OHCI		62
+#define CLK_DE			63
+#define CLK_TCON0		64
+#define CLK_CSI_MISC		65
+#define CLK_CSI0_MCLK		66
+#define CLK_CSI1_SCLK		67
+#define CLK_CSI1_MCLK		68
+#define CLK_VE			69
+#define CLK_AC_DIG		70
+#define CLK_AVS			71
+
+#define CLK_MIPI_CSI		73
+
+#endif /* _DT_BINDINGS_CLK_SUN8I_V3S_H_ */
diff --git a/include/dt-bindings/reset/sun8i-v3s-ccu.h b/include/dt-bindings/reset/sun8i-v3s-ccu.h
new file mode 100644
index 000000000000..b58ef21a2e18
--- /dev/null
+++ b/include/dt-bindings/reset/sun8i-v3s-ccu.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun8i-v3s-ccu.h, which is
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN8I_V3S_H_
+#define _DT_BINDINGS_RST_SUN8I_V3S_H_
+
+#define RST_USB_PHY0		0
+
+#define RST_MBUS		1
+
+#define RST_BUS_CE		5
+#define RST_BUS_DMA		6
+#define RST_BUS_MMC0		7
+#define RST_BUS_MMC1		8
+#define RST_BUS_MMC2		9
+#define RST_BUS_DRAM		11
+#define RST_BUS_EMAC		12
+#define RST_BUS_HSTIMER		14
+#define RST_BUS_SPI0		15
+#define RST_BUS_OTG		17
+#define RST_BUS_EHCI0		18
+#define RST_BUS_OHCI0		22
+#define RST_BUS_VE		26
+#define RST_BUS_TCON0		27
+#define RST_BUS_CSI		30
+#define RST_BUS_DE		34
+#define RST_BUS_DBG		38
+#define RST_BUS_EPHY		39
+#define RST_BUS_CODEC		40
+#define RST_BUS_I2C0		46
+#define RST_BUS_I2C1		47
+#define RST_BUS_UART0		49
+#define RST_BUS_UART1		50
+#define RST_BUS_UART2		51
+
+#endif /* _DT_BINDINGS_RST_SUN8I_H3_H_ */
-- 
2.11.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: icenowy@aosc.xyz (Icenowy Zheng)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/6] clk: sunxi-ng: add support for V3s CCU
Date: Fri, 20 Jan 2017 01:54:45 +0800	[thread overview]
Message-ID: <20170119175448.11445-3-icenowy@aosc.xyz> (raw)
In-Reply-To: <20170119175448.11445-1-icenowy@aosc.xyz>

V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks
about CSI, are different, which makes it to need a new CCU driver.

Add such a new driver for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
 drivers/clk/sunxi-ng/Kconfig              |  11 +
 drivers/clk/sunxi-ng/Makefile             |   1 +
 drivers/clk/sunxi-ng/ccu-sun8i-v3s.c      | 590 ++++++++++++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun8i-v3s.h      |  63 ++++
 include/dt-bindings/clock/sun8i-v3s-ccu.h | 107 ++++++
 include/dt-bindings/reset/sun8i-v3s-ccu.h |  78 ++++
 6 files changed, 850 insertions(+)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
 create mode 100644 include/dt-bindings/clock/sun8i-v3s-ccu.h
 create mode 100644 include/dt-bindings/reset/sun8i-v3s-ccu.h

diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 8454c6e3dd65..1ca48255802f 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -109,4 +109,15 @@ config SUN8I_H3_CCU
 	select SUNXI_CCU_PHASE
 	default MACH_SUN8I
 
+config SUN8I_V3S_CCU
+	bool "Support for the Allwinner V3s CCU"
+	select SUNXI_CCU_DIV
+	select SUNXI_CCU_NK
+	select SUNXI_CCU_NKM
+	select SUNXI_CCU_NKMP
+	select SUNXI_CCU_NM
+	select SUNXI_CCU_MP
+	select SUNXI_CCU_PHASE
+	default MACH_SUN8I
+
 endif
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 24fbc6e5deb8..d1cd81a0f112 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -23,3 +23,4 @@ obj-$(CONFIG_SUN6I_A31_CCU)	+= ccu-sun6i-a31.o
 obj-$(CONFIG_SUN8I_A23_CCU)	+= ccu-sun8i-a23.o
 obj-$(CONFIG_SUN8I_A33_CCU)	+= ccu-sun8i-a33.o
 obj-$(CONFIG_SUN8I_H3_CCU)	+= ccu-sun8i-h3.o
+obj-$(CONFIG_SUN8I_V3S_CCU)	+= ccu-sun8i-v3s.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
new file mode 100644
index 000000000000..a3f505626878
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
@@ -0,0 +1,590 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on ccu-sun8i-h3.c, which is:
+ * Copyright (c) 2016 Maxime Ripard. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun8i-v3s.h"
+
+static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpu_clk, "pll-cpu",
+				     "osc24M", 0x000,
+				     8, 5,	/* N */
+				     4, 2,	/* K */
+				     0, 2,	/* M */
+				     16, 2,	/* P */
+				     BIT(31),	/* gate */
+				     BIT(28),	/* lock */
+				     0);
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names
+ */
+#define SUN8I_V3S_PLL_AUDIO_REG	0x008
+
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
+				   "osc24M", 0x008,
+				   8, 7,	/* N */
+				   0, 5,	/* M */
+				   BIT(31),	/* gate */
+				   BIT(28),	/* lock */
+				   0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video_clk, "pll-video",
+					"osc24M", 0x0010,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
+					"osc24M", 0x0018,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					0);
+
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr_clk, "pll-ddr",
+				    "osc24M", 0x020,
+				    8, 5,	/* N */
+				    4, 2,	/* K */
+				    0, 2,	/* M */
+				    BIT(31),	/* gate */
+				    BIT(28),	/* lock */
+				    0);
+
+static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph0_clk, "pll-periph0",
+					   "osc24M", 0x028,
+					   8, 5,	/* N */
+					   4, 2,	/* K */
+					   BIT(31),	/* gate */
+					   BIT(28),	/* lock */
+					   2,		/* post-div */
+					   0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_isp_clk, "pll-isp",
+					"osc24M", 0x002c,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					0);
+
+static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph1_clk, "pll-periph1",
+					   "osc24M", 0x044,
+					   8, 5,	/* N */
+					   4, 2,	/* K */
+					   BIT(31),	/* gate */
+					   BIT(28),	/* lock */
+					   2,		/* post-div */
+					   0);
+
+static const char * const cpu_parents[] = { "osc32k", "osc24M",
+					     "pll-cpu", "pll-cpu" };
+static SUNXI_CCU_MUX(cpu_clk, "cpu", cpu_parents,
+		     0x050, 16, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x050, 0, 2, 0);
+
+static const char * const ahb1_parents[] = { "osc32k", "osc24M",
+					     "axi", "pll-periph0" };
+static struct ccu_div ahb1_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+	.mux		= {
+		.shift	= 12,
+		.width	= 2,
+
+		.variable_prediv	= {
+			.index	= 3,
+			.shift	= 6,
+			.width	= 2,
+		},
+	},
+
+	.common		= {
+		.reg		= 0x054,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("ahb1",
+						      ahb1_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static struct clk_div_table apb1_div_table[] = {
+	{ .val = 0, .div = 2 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 8 },
+	{ /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
+			   0x054, 8, 2, apb1_div_table, 0);
+
+static const char * const apb2_parents[] = { "osc32k", "osc24M",
+					     "pll-periph0", "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
+			     0, 5,	/* M */
+			     16, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static const char * const ahb2_parents[] = { "ahb1", "pll-periph0" };
+static const struct ccu_mux_fixed_prediv ahb2_fixed_predivs[] = {
+	{ .index = 1, .div = 2 },
+};
+static struct ccu_mux ahb2_clk = {
+	.mux		= {
+		.shift	= 0,
+		.width	= 1,
+		.fixed_predivs	= ahb2_fixed_predivs,
+		.n_predivs	= ARRAY_SIZE(ahb2_fixed_predivs),
+	},
+
+	.common		= {
+		.reg		= 0x05c,
+		.features	= CCU_FEATURE_FIXED_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("ahb2",
+						      ahb2_parents,
+						      &ccu_mux_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_ce_clk,	"bus-ce",	"ahb1",
+		      0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_dma_clk,	"bus-dma",	"ahb1",
+		      0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_mmc0_clk,	"bus-mmc0",	"ahb1",
+		      0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk,	"bus-mmc1",	"ahb1",
+		      0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk,	"bus-mmc2",	"ahb1",
+		      0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_dram_clk,	"bus-dram",	"ahb1",
+		      0x060, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_emac_clk,	"bus-emac",	"ahb2",
+		      0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_hstimer_clk,	"bus-hstimer",	"ahb1",
+		      0x060, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_spi0_clk,	"bus-spi0",	"ahb1",
+		      0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_otg_clk,	"bus-otg",	"ahb1",
+		      0x060, BIT(24), 0);
+static SUNXI_CCU_GATE(bus_ehci0_clk,	"bus-ehci0",	"ahb1",
+		      0x060, BIT(26), 0);
+static SUNXI_CCU_GATE(bus_ohci0_clk,	"bus-ohci0",	"ahb1",
+		      0x060, BIT(29), 0);
+
+static SUNXI_CCU_GATE(bus_ve_clk,	"bus-ve",	"ahb1",
+		      0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_tcon0_clk,	"bus-tcon0",	"ahb1",
+		      0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_csi_clk,	"bus-csi",	"ahb1",
+		      0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_de_clk,	"bus-de",	"ahb1",
+		      0x064, BIT(12), 0);
+
+static SUNXI_CCU_GATE(bus_codec_clk,	"bus-codec",	"apb1",
+		      0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_pio_clk,	"bus-pio",	"apb1",
+		      0x068, BIT(5), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk,	"bus-i2c0",	"apb2",
+		      0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk,	"bus-i2c1",	"apb2",
+		      0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_uart0_clk,	"bus-uart0",	"apb2",
+		      0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk,	"bus-uart1",	"apb2",
+		      0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk,	"bus-uart2",	"apb2",
+		      0x06c, BIT(18), 0);
+
+static SUNXI_CCU_GATE(bus_ephy_clk,	"bus-ephy",	"ahb1",
+		      0x070, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_dbg_clk,	"bus-dbg",	"ahb1",
+		      0x070, BIT(7), 0);
+
+static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0",
+						     "pll-periph1" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0",
+		       0x088, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0",
+		       0x088, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1",
+		       0x08c, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1",
+		       0x08c, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2_sample", "mmc2",
+		       0x090, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc2_output_clk, "mmc2_output", "mmc2",
+		       0x090, 8, 3, 0);
+
+static const char * const ce_parents[] = { "osc24M", "pll-periph0", };
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x09c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE(usb_phy0_clk,	"usb-phy0",	"osc24M",
+		      0x0cc, BIT(8), 0);
+static SUNXI_CCU_GATE(usb_ohci0_clk,	"usb-ohci0",	"osc24M",
+		      0x0cc, BIT(16), 0);
+
+static const char * const dram_parents[] = { "pll-ddr", "pll-periph0-2x" };
+static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents,
+			    0x0f4, 0, 4, 20, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(dram_ve_clk,	"dram-ve",	"dram",
+		      0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi_clk,	"dram-csi",	"dram",
+		      0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_ehci_clk,	"dram-ehci",	"dram",
+		      0x100, BIT(17), 0);
+static SUNXI_CCU_GATE(dram_ohci_clk,	"dram-ohci",	"dram",
+		      0x100, BIT(18), 0);
+
+static const char * const de_parents[] = { "pll-video", "pll-periph0" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
+				 0x104, 0, 4, 24, 2, BIT(31), 0);
+
+static const char * const tcon_parents[] = { "pll-video" };
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon_clk, "tcon", tcon_parents,
+				 0x118, 0, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_GATE(csi_misc_clk,	"csi-misc",	"osc24M",
+		      0x130, BIT(31), 0);
+
+static const char * const csi_mclk_parents[] = { "osc24M", "pll-video",
+						 "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi0_mclk_clk, "csi0-mclk", csi_mclk_parents,
+				 0x130, 0, 5, 8, 3, BIT(15), 0);
+
+static const char * const csi1_sclk_parents[] = { "pll-video", "pll-isp" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi1_sclk_clk, "csi-sclk", csi1_sclk_parents,
+				 0x134, 16, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(csi1_mclk_clk, "csi-mclk", csi_mclk_parents,
+				 0x134, 0, 5, 8, 3, BIT(15), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
+			     0x13c, 16, 3, BIT(31), 0);
+
+static SUNXI_CCU_GATE(ac_dig_clk,	"ac-dig",	"pll-audio",
+		      0x140, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(avs_clk,		"avs",		"osc24M",
+		      0x144, BIT(31), 0);
+
+static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x", "pll-ddr" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
+				 0x15c, 0, 3, 24, 2, BIT(31), CLK_IS_CRITICAL);
+
+static const char * const mipi_csi_parents[] = { "pll-video", "pll-periph0",
+						 "pll-isp" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mipi_csi_clk, "mipi-csi", mipi_csi_parents,
+			     0x16c, 0, 3, 24, 2, BIT(31), 0);
+
+static struct ccu_common *sun8i_v3s_ccu_clks[] = {
+	&pll_cpu_clk.common,
+	&pll_audio_base_clk.common,
+	&pll_video_clk.common,
+	&pll_ve_clk.common,
+	&pll_ddr_clk.common,
+	&pll_periph0_clk.common,
+	&pll_isp_clk.common,
+	&pll_periph1_clk.common,
+	&cpu_clk.common,
+	&axi_clk.common,
+	&ahb1_clk.common,
+	&apb1_clk.common,
+	&apb2_clk.common,
+	&ahb2_clk.common,
+	&bus_ce_clk.common,
+	&bus_dma_clk.common,
+	&bus_mmc0_clk.common,
+	&bus_mmc1_clk.common,
+	&bus_mmc2_clk.common,
+	&bus_dram_clk.common,
+	&bus_emac_clk.common,
+	&bus_hstimer_clk.common,
+	&bus_spi0_clk.common,
+	&bus_otg_clk.common,
+	&bus_ehci0_clk.common,
+	&bus_ohci0_clk.common,
+	&bus_ve_clk.common,
+	&bus_tcon0_clk.common,
+	&bus_csi_clk.common,
+	&bus_de_clk.common,
+	&bus_codec_clk.common,
+	&bus_pio_clk.common,
+	&bus_i2c0_clk.common,
+	&bus_i2c1_clk.common,
+	&bus_uart0_clk.common,
+	&bus_uart1_clk.common,
+	&bus_uart2_clk.common,
+	&bus_ephy_clk.common,
+	&bus_dbg_clk.common,
+	&mmc0_clk.common,
+	&mmc0_sample_clk.common,
+	&mmc0_output_clk.common,
+	&mmc1_clk.common,
+	&mmc1_sample_clk.common,
+	&mmc1_output_clk.common,
+	&mmc2_clk.common,
+	&mmc2_sample_clk.common,
+	&mmc2_output_clk.common,
+	&ce_clk.common,
+	&spi0_clk.common,
+	&usb_phy0_clk.common,
+	&usb_ohci0_clk.common,
+	&dram_clk.common,
+	&dram_ve_clk.common,
+	&dram_csi_clk.common,
+	&dram_ohci_clk.common,
+	&dram_ehci_clk.common,
+	&de_clk.common,
+	&tcon_clk.common,
+	&csi_misc_clk.common,
+	&csi0_mclk_clk.common,
+	&csi1_sclk_clk.common,
+	&csi1_mclk_clk.common,
+	&ve_clk.common,
+	&ac_dig_clk.common,
+	&avs_clk.common,
+	&mbus_clk.common,
+	&mipi_csi_clk.common,
+};
+
+/* We hardcode the divider to 4 for now */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+			"pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+			"pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+			"pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+			"pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x",
+			"pll-periph0", 1, 2, 0);
+
+static struct clk_hw_onecell_data sun8i_v3s_hw_clks = {
+	.hws	= {
+		[CLK_PLL_CPU]		= &pll_cpu_clk.common.hw,
+		[CLK_PLL_AUDIO_BASE]	= &pll_audio_base_clk.common.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.hw,
+		[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.hw,
+		[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.hw,
+		[CLK_PLL_AUDIO_8X]	= &pll_audio_8x_clk.hw,
+		[CLK_PLL_VIDEO]		= &pll_video_clk.common.hw,
+		[CLK_PLL_VE]		= &pll_ve_clk.common.hw,
+		[CLK_PLL_DDR]		= &pll_ddr_clk.common.hw,
+		[CLK_PLL_PERIPH0]	= &pll_periph0_clk.common.hw,
+		[CLK_PLL_PERIPH0_2X]	= &pll_periph0_2x_clk.hw,
+		[CLK_PLL_ISP]		= &pll_isp_clk.common.hw,
+		[CLK_PLL_PERIPH1]	= &pll_periph1_clk.common.hw,
+		[CLK_CPU]		= &cpu_clk.common.hw,
+		[CLK_AXI]		= &axi_clk.common.hw,
+		[CLK_AHB1]		= &ahb1_clk.common.hw,
+		[CLK_APB1]		= &apb1_clk.common.hw,
+		[CLK_APB2]		= &apb2_clk.common.hw,
+		[CLK_AHB2]		= &ahb2_clk.common.hw,
+		[CLK_BUS_CE]		= &bus_ce_clk.common.hw,
+		[CLK_BUS_DMA]		= &bus_dma_clk.common.hw,
+		[CLK_BUS_MMC0]		= &bus_mmc0_clk.common.hw,
+		[CLK_BUS_MMC1]		= &bus_mmc1_clk.common.hw,
+		[CLK_BUS_MMC2]		= &bus_mmc2_clk.common.hw,
+		[CLK_BUS_DRAM]		= &bus_dram_clk.common.hw,
+		[CLK_BUS_EMAC]		= &bus_emac_clk.common.hw,
+		[CLK_BUS_HSTIMER]	= &bus_hstimer_clk.common.hw,
+		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
+		[CLK_BUS_OTG]		= &bus_otg_clk.common.hw,
+		[CLK_BUS_EHCI0]		= &bus_ehci0_clk.common.hw,
+		[CLK_BUS_OHCI0]		= &bus_ohci0_clk.common.hw,
+		[CLK_BUS_VE]		= &bus_ve_clk.common.hw,
+		[CLK_BUS_TCON0]		= &bus_tcon0_clk.common.hw,
+		[CLK_BUS_CSI]		= &bus_csi_clk.common.hw,
+		[CLK_BUS_DE]		= &bus_de_clk.common.hw,
+		[CLK_BUS_CODEC]		= &bus_codec_clk.common.hw,
+		[CLK_BUS_PIO]		= &bus_pio_clk.common.hw,
+		[CLK_BUS_I2C0]		= &bus_i2c0_clk.common.hw,
+		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
+		[CLK_BUS_UART0]		= &bus_uart0_clk.common.hw,
+		[CLK_BUS_UART1]		= &bus_uart1_clk.common.hw,
+		[CLK_BUS_UART2]		= &bus_uart2_clk.common.hw,
+		[CLK_BUS_EPHY]		= &bus_ephy_clk.common.hw,
+		[CLK_BUS_DBG]		= &bus_dbg_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC0_SAMPLE]	= &mmc0_sample_clk.common.hw,
+		[CLK_MMC0_OUTPUT]	= &mmc0_output_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC1_SAMPLE]	= &mmc1_sample_clk.common.hw,
+		[CLK_MMC1_OUTPUT]	= &mmc1_output_clk.common.hw,
+		[CLK_CE]		= &ce_clk.common.hw,
+		[CLK_SPI0]		= &spi0_clk.common.hw,
+		[CLK_USB_PHY0]		= &usb_phy0_clk.common.hw,
+		[CLK_USB_OHCI0]		= &usb_ohci0_clk.common.hw,
+		[CLK_DRAM]		= &dram_clk.common.hw,
+		[CLK_DRAM_VE]		= &dram_ve_clk.common.hw,
+		[CLK_DRAM_CSI]		= &dram_csi_clk.common.hw,
+		[CLK_DRAM_EHCI]		= &dram_ehci_clk.common.hw,
+		[CLK_DRAM_OHCI]		= &dram_ohci_clk.common.hw,
+		[CLK_DE]		= &de_clk.common.hw,
+		[CLK_TCON0]		= &tcon_clk.common.hw,
+		[CLK_CSI_MISC]		= &csi_misc_clk.common.hw,
+		[CLK_CSI0_MCLK]		= &csi0_mclk_clk.common.hw,
+		[CLK_CSI1_SCLK]		= &csi1_sclk_clk.common.hw,
+		[CLK_CSI1_MCLK]		= &csi1_mclk_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_AC_DIG]		= &ac_dig_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_MBUS]		= &mbus_clk.common.hw,
+		[CLK_MIPI_CSI]		= &mipi_csi_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun8i_v3s_ccu_resets[] = {
+	[RST_USB_PHY0]		=  { 0x0cc, BIT(0) },
+
+	[RST_MBUS]		=  { 0x0fc, BIT(31) },
+
+	[RST_BUS_CE]		=  { 0x2c0, BIT(5) },
+	[RST_BUS_DMA]		=  { 0x2c0, BIT(6) },
+	[RST_BUS_MMC0]		=  { 0x2c0, BIT(8) },
+	[RST_BUS_MMC1]		=  { 0x2c0, BIT(9) },
+	[RST_BUS_MMC2]		=  { 0x2c0, BIT(10) },
+	[RST_BUS_DRAM]		=  { 0x2c0, BIT(14) },
+	[RST_BUS_EMAC]		=  { 0x2c0, BIT(17) },
+	[RST_BUS_HSTIMER]	=  { 0x2c0, BIT(19) },
+	[RST_BUS_SPI0]		=  { 0x2c0, BIT(20) },
+	[RST_BUS_OTG]		=  { 0x2c0, BIT(23) },
+	[RST_BUS_EHCI0]		=  { 0x2c0, BIT(26) },
+	[RST_BUS_OHCI0]		=  { 0x2c0, BIT(29) },
+
+	[RST_BUS_VE]		=  { 0x2c4, BIT(0) },
+	[RST_BUS_TCON0]		=  { 0x2c4, BIT(3) },
+	[RST_BUS_CSI]		=  { 0x2c4, BIT(8) },
+	[RST_BUS_DE]		=  { 0x2c4, BIT(12) },
+	[RST_BUS_DBG]		=  { 0x2c4, BIT(31) },
+
+	[RST_BUS_EPHY]		=  { 0x2c8, BIT(2) },
+
+	[RST_BUS_CODEC]		=  { 0x2d0, BIT(0) },
+
+	[RST_BUS_I2C0]		=  { 0x2d8, BIT(0) },
+	[RST_BUS_I2C1]		=  { 0x2d8, BIT(1) },
+	[RST_BUS_UART0]		=  { 0x2d8, BIT(16) },
+	[RST_BUS_UART1]		=  { 0x2d8, BIT(17) },
+	[RST_BUS_UART2]		=  { 0x2d8, BIT(18) },
+};
+
+static const struct sunxi_ccu_desc sun8i_v3s_ccu_desc = {
+	.ccu_clks	= sun8i_v3s_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun8i_v3s_ccu_clks),
+
+	.hw_clks	= &sun8i_v3s_hw_clks,
+
+	.resets		= sun8i_v3s_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun8i_v3s_ccu_resets),
+};
+
+static void __init sun8i_v3s_ccu_setup(struct device_node *node)
+{
+	void __iomem *reg;
+	u32 val;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("%s: Could not map the clock registers\n",
+		       of_node_full_name(node));
+		return;
+	}
+
+	/* Force the PLL-Audio-1x divider to 4 */
+	val = readl(reg + SUN8I_V3S_PLL_AUDIO_REG);
+	val &= ~GENMASK(19, 16);
+	writel(val | (3 << 16), reg + SUN8I_V3S_PLL_AUDIO_REG);
+
+	sunxi_ccu_probe(node, reg, &sun8i_v3s_ccu_desc);
+}
+CLK_OF_DECLARE(sun8i_v3s_ccu, "allwinner,sun8i-v3s-ccu",
+	       sun8i_v3s_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
new file mode 100644
index 000000000000..4a4d36fdad96
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on ccu-sun8i-h3.h, which is:
+ * Copyright (c) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN8I_H3_H_
+#define _CCU_SUN8I_H3_H_
+
+#include <dt-bindings/clock/sun8i-v3s-ccu.h>
+#include <dt-bindings/reset/sun8i-v3s-ccu.h>
+
+#define CLK_PLL_CPU		0
+#define CLK_PLL_AUDIO_BASE	1
+#define CLK_PLL_AUDIO		2
+#define CLK_PLL_AUDIO_2X	3
+#define CLK_PLL_AUDIO_4X	4
+#define CLK_PLL_AUDIO_8X	5
+#define CLK_PLL_VIDEO		6
+#define CLK_PLL_VE		7
+#define CLK_PLL_DDR		8
+#define CLK_PLL_PERIPH0		9
+#define CLK_PLL_PERIPH0_2X	10
+#define CLK_PLL_ISP		11
+#define CLK_PLL_PERIPH1		12
+/* Reserve one number for not implemented and not used PLL_DDR1 */
+
+/* The CPU clock is exported */
+
+#define CLK_AXI			15
+#define CLK_AHB1		16
+#define CLK_APB1		17
+#define CLK_APB2		18
+#define CLK_AHB2		19
+
+/* All the bus gates are exported */
+
+/* The first bunch of module clocks are exported */
+
+#define CLK_DRAM		58
+
+/* All the DRAM gates are exported */
+
+/* Some more module clocks are exported */
+
+#define CLK_MBUS		72
+
+/* And the GPU module clock is exported */
+
+#define CLK_NUMBER		(CLK_MIPI_CSI + 1)
+
+#endif /* _CCU_SUN8I_H3_H_ */
diff --git a/include/dt-bindings/clock/sun8i-v3s-ccu.h b/include/dt-bindings/clock/sun8i-v3s-ccu.h
new file mode 100644
index 000000000000..c0d5d5599c87
--- /dev/null
+++ b/include/dt-bindings/clock/sun8i-v3s-ccu.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun8i-h3-ccu.h, which is:
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN8I_V3S_H_
+#define _DT_BINDINGS_CLK_SUN8I_V3S_H_
+
+#define CLK_CPU			14
+
+#define CLK_BUS_CE		20
+#define CLK_BUS_DMA		21
+#define CLK_BUS_MMC0		22
+#define CLK_BUS_MMC1		23
+#define CLK_BUS_MMC2		24
+#define CLK_BUS_DRAM		25
+#define CLK_BUS_EMAC		26
+#define CLK_BUS_HSTIMER		27
+#define CLK_BUS_SPI0		28
+#define CLK_BUS_OTG		29
+#define CLK_BUS_EHCI0		30
+#define CLK_BUS_OHCI0		31
+#define CLK_BUS_VE		32
+#define CLK_BUS_TCON0		33
+#define CLK_BUS_CSI		34
+#define CLK_BUS_DE		35
+#define CLK_BUS_CODEC		36
+#define CLK_BUS_PIO		37
+#define CLK_BUS_I2C0		38
+#define CLK_BUS_I2C1		39
+#define CLK_BUS_UART0		40
+#define CLK_BUS_UART1		41
+#define CLK_BUS_UART2		42
+#define CLK_BUS_EPHY		43
+#define CLK_BUS_DBG		44
+
+#define CLK_MMC0		45
+#define CLK_MMC0_SAMPLE		46
+#define CLK_MMC0_OUTPUT		47
+#define CLK_MMC1		48
+#define CLK_MMC1_SAMPLE		49
+#define CLK_MMC1_OUTPUT		50
+#define CLK_MMC2		51
+#define CLK_MMC2_SAMPLE		52
+#define CLK_MMC2_OUTPUT		53
+#define CLK_CE			54
+#define CLK_SPI0		55
+#define CLK_USB_PHY0		56
+#define CLK_USB_OHCI0		57
+
+#define CLK_DRAM_VE		59
+#define CLK_DRAM_CSI		60
+#define CLK_DRAM_EHCI		61
+#define CLK_DRAM_OHCI		62
+#define CLK_DE			63
+#define CLK_TCON0		64
+#define CLK_CSI_MISC		65
+#define CLK_CSI0_MCLK		66
+#define CLK_CSI1_SCLK		67
+#define CLK_CSI1_MCLK		68
+#define CLK_VE			69
+#define CLK_AC_DIG		70
+#define CLK_AVS			71
+
+#define CLK_MIPI_CSI		73
+
+#endif /* _DT_BINDINGS_CLK_SUN8I_V3S_H_ */
diff --git a/include/dt-bindings/reset/sun8i-v3s-ccu.h b/include/dt-bindings/reset/sun8i-v3s-ccu.h
new file mode 100644
index 000000000000..b58ef21a2e18
--- /dev/null
+++ b/include/dt-bindings/reset/sun8i-v3s-ccu.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun8i-v3s-ccu.h, which is
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN8I_V3S_H_
+#define _DT_BINDINGS_RST_SUN8I_V3S_H_
+
+#define RST_USB_PHY0		0
+
+#define RST_MBUS		1
+
+#define RST_BUS_CE		5
+#define RST_BUS_DMA		6
+#define RST_BUS_MMC0		7
+#define RST_BUS_MMC1		8
+#define RST_BUS_MMC2		9
+#define RST_BUS_DRAM		11
+#define RST_BUS_EMAC		12
+#define RST_BUS_HSTIMER		14
+#define RST_BUS_SPI0		15
+#define RST_BUS_OTG		17
+#define RST_BUS_EHCI0		18
+#define RST_BUS_OHCI0		22
+#define RST_BUS_VE		26
+#define RST_BUS_TCON0		27
+#define RST_BUS_CSI		30
+#define RST_BUS_DE		34
+#define RST_BUS_DBG		38
+#define RST_BUS_EPHY		39
+#define RST_BUS_CODEC		40
+#define RST_BUS_I2C0		46
+#define RST_BUS_I2C1		47
+#define RST_BUS_UART0		49
+#define RST_BUS_UART1		50
+#define RST_BUS_UART2		51
+
+#endif /* _DT_BINDINGS_RST_SUN8I_H3_H_ */
-- 
2.11.0

  parent reply	other threads:[~2017-01-19 17:54 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-19 17:54 [PATCH v3 1/6] dt-bindings: add device tree binding for Allwinner V3s pinctrl Icenowy Zheng
2017-01-19 17:54 ` Icenowy Zheng
2017-01-19 17:54 ` Icenowy Zheng
2017-01-19 17:54 ` [PATCH v3 2/6] arm: sunxi: add support for V3s SoC Icenowy Zheng
2017-01-19 17:54   ` Icenowy Zheng
2017-01-19 17:54   ` Icenowy Zheng
2017-01-20 20:29   ` Maxime Ripard
2017-01-20 20:29     ` Maxime Ripard
2017-01-20 20:29     ` Maxime Ripard
2017-01-19 17:54 ` Icenowy Zheng [this message]
2017-01-19 17:54   ` [PATCH v3 3/6] clk: sunxi-ng: add support for V3s CCU Icenowy Zheng
2017-01-19 17:54   ` Icenowy Zheng
2017-01-20 20:38   ` Maxime Ripard
2017-01-20 20:38     ` Maxime Ripard
2017-01-20 20:38     ` Maxime Ripard
2017-01-19 17:54 ` [PATCH v3 4/6] dt-bindings: add device binding for the CCU of Allwinner V3s Icenowy Zheng
2017-01-19 17:54   ` Icenowy Zheng
2017-01-19 17:54   ` Icenowy Zheng
2017-01-20 20:32   ` Maxime Ripard
2017-01-20 20:32     ` Maxime Ripard
2017-01-20 20:32     ` Maxime Ripard
2017-01-19 17:54 ` [PATCH v3 5/6] ARM: dts: sunxi: add dtsi file for V3s SoC Icenowy Zheng
2017-01-19 17:54   ` Icenowy Zheng
2017-01-19 17:54   ` Icenowy Zheng
2017-01-20 20:48   ` Maxime Ripard
2017-01-20 20:48     ` Maxime Ripard
2017-01-20 20:48     ` Maxime Ripard
2017-01-19 17:54 ` [PATCH v3 6/6] ARM: dts: sunxi: add support for Lichee Pi Zero board Icenowy Zheng
2017-01-19 17:54   ` Icenowy Zheng
2017-01-19 17:54   ` Icenowy Zheng
2017-01-20 20:48   ` Maxime Ripard
2017-01-20 20:48     ` Maxime Ripard
2017-01-20 20:48     ` Maxime Ripard
2017-01-20 20:24 ` [PATCH v3 1/6] dt-bindings: add device tree binding for Allwinner V3s pinctrl Maxime Ripard
2017-01-20 20:24   ` Maxime Ripard
2017-01-20 20:24   ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170119175448.11445-3-icenowy@aosc.xyz \
    --to=icenowy@aosc.xyz \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maxime.ripard@free-electrons.com \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.