* [Qemu-devel] [Bug 1242765] [NEW] USB passthrough to Windows 7 guest fails with error -110, hangs
@ 2013-10-21 15:54 Greg Sheremeta
2017-01-25 9:04 ` [Qemu-devel] [Bug 1242765] " Thomas Huth
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Greg Sheremeta @ 2013-10-21 15:54 UTC (permalink / raw)
To: qemu-devel
Public bug reported:
Description of problem:
Using a Sandisk Cruzer Fit 16GB USB thumb drive.
Using virt-manager on Fedora 19 host, and Windows 7 32 bit guest.
I set up a USB2 controller on Windows 7 guest in virt-manager. Windows
sees the USB drive and can open the file manager and correctly show the
files. I can copy a file from the thumb drive to the Fedora desktop, and
then play the file on the desktop. However, any attempt to open a file
directly on the thumb drive (example, play an MP3 using Windows Media
Player) results in guest hang and host kernel messages:
Oct 19 21:15:35 localhost kernel: [187592.977839] usb 1-1.3: reset high-speed USB device number 13 using ehci-pci
Oct 19 21:15:40 localhost kernel: [187598.065274] usb 1-1.3: device descriptor read/all, error -110
Oct 19 21:15:40 localhost kernel: [187598.138167] usb 1-1.3: reset high-speed USB device number 13 using ehci-pci
Oct 19 21:15:56 localhost kernel: [187613.218119] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:16:11 localhost kernel: [187628.399275] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:16:11 localhost kernel: [187628.573355] usb 1-1.3: reset high-speed USB device number 13 using ehci-pci
Oct 19 21:16:16 localhost kernel: [187633.587778] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:16:21 localhost kernel: [187638.702244] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:16:21 localhost kernel: [187638.876201] usb 1-1.3: reset high-speed USB device number 13 using ehci-pci
Oct 19 21:16:26 localhost kernel: [187643.890642] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:16:31 localhost kernel: [187649.005071] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:16:31 localhost kernel: [187649.106188] usb 1-1.3: USB disconnect, device number 13
Oct 19 21:16:31 localhost kernel: [187649.178969] usb 1-1.3: new high-speed USB device number 14 using ehci-pci
Oct 19 21:16:47 localhost kernel: [187664.258945] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:17:02 localhost kernel: [187679.440092] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:17:02 localhost kernel: [187679.614194] usb 1-1.3: new high-speed USB device number 15 using ehci-pci
Oct 19 21:17:17 localhost kernel: [187694.694148] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:17:32 localhost kernel: [187709.875297] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:17:32 localhost kernel: [187710.049386] usb 1-1.3: new high-speed USB device number 16 using ehci-pci
Oct 19 21:17:37 localhost kernel: [187715.063803] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:17:41 localhost kernel: [187719.005453] usb 1-1.3: device descriptor read/8, error -71
After that -71 error, the thumb drive completely disappears from the
host, as if it is powered down.
I read that -110 is supposedly a power issue. I can play media files
directly from the thumb drive on the host, so the power seems fine on
the host.
How reproducible:
always
Steps to reproduce:
1. use virt-manager, create a Windows 7 32 bit guest
2. in virt-manager, set Controller USB to USB2
3. on host, insert Sandisk Cruser Fit thumb drive FAT32 format, with an MP3 file on it
4. in virt-manager, add a USB passthrough device and assign it to thumb drive
5. boot Windows 7 guest
6. verify that Windows 7 can see the thumb drive
7. use Windows Media Player to play MP3
Actual results:
guest hangs, then host powers off thumb drive
Expected results:
The MP3 file should play :)
Additional info:
Fedora 19
Installed Packages
qemu-common.x86_64 2:1.4.2-11.fc19 @updates
qemu-guest-agent.x86_64 2:1.4.2-11.fc19 @updates
qemu-img.x86_64 2:1.4.2-11.fc19 @updates
qemu-kvm.x86_64 2:1.4.2-11.fc19 @updates
qemu-system-x86.x86_64 2:1.4.2-11.fc19 @updates
virt-manager.noarch 0.10.0-3.fc19 @updates
kernel.x86_64 3.11.1-200.fc19 @updates
** Affects: qemu
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1242765
Title:
USB passthrough to Windows 7 guest fails with error -110, hangs
Status in QEMU:
New
Bug description:
Description of problem:
Using a Sandisk Cruzer Fit 16GB USB thumb drive.
Using virt-manager on Fedora 19 host, and Windows 7 32 bit guest.
I set up a USB2 controller on Windows 7 guest in virt-manager. Windows
sees the USB drive and can open the file manager and correctly show
the files. I can copy a file from the thumb drive to the Fedora
desktop, and then play the file on the desktop. However, any attempt
to open a file directly on the thumb drive (example, play an MP3 using
Windows Media Player) results in guest hang and host kernel messages:
Oct 19 21:15:35 localhost kernel: [187592.977839] usb 1-1.3: reset high-speed USB device number 13 using ehci-pci
Oct 19 21:15:40 localhost kernel: [187598.065274] usb 1-1.3: device descriptor read/all, error -110
Oct 19 21:15:40 localhost kernel: [187598.138167] usb 1-1.3: reset high-speed USB device number 13 using ehci-pci
Oct 19 21:15:56 localhost kernel: [187613.218119] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:16:11 localhost kernel: [187628.399275] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:16:11 localhost kernel: [187628.573355] usb 1-1.3: reset high-speed USB device number 13 using ehci-pci
Oct 19 21:16:16 localhost kernel: [187633.587778] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:16:21 localhost kernel: [187638.702244] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:16:21 localhost kernel: [187638.876201] usb 1-1.3: reset high-speed USB device number 13 using ehci-pci
Oct 19 21:16:26 localhost kernel: [187643.890642] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:16:31 localhost kernel: [187649.005071] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:16:31 localhost kernel: [187649.106188] usb 1-1.3: USB disconnect, device number 13
Oct 19 21:16:31 localhost kernel: [187649.178969] usb 1-1.3: new high-speed USB device number 14 using ehci-pci
Oct 19 21:16:47 localhost kernel: [187664.258945] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:17:02 localhost kernel: [187679.440092] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:17:02 localhost kernel: [187679.614194] usb 1-1.3: new high-speed USB device number 15 using ehci-pci
Oct 19 21:17:17 localhost kernel: [187694.694148] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:17:32 localhost kernel: [187709.875297] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:17:32 localhost kernel: [187710.049386] usb 1-1.3: new high-speed USB device number 16 using ehci-pci
Oct 19 21:17:37 localhost kernel: [187715.063803] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:17:41 localhost kernel: [187719.005453] usb 1-1.3: device descriptor read/8, error -71
After that -71 error, the thumb drive completely disappears from the
host, as if it is powered down.
I read that -110 is supposedly a power issue. I can play media files
directly from the thumb drive on the host, so the power seems fine on
the host.
How reproducible:
always
Steps to reproduce:
1. use virt-manager, create a Windows 7 32 bit guest
2. in virt-manager, set Controller USB to USB2
3. on host, insert Sandisk Cruser Fit thumb drive FAT32 format, with an MP3 file on it
4. in virt-manager, add a USB passthrough device and assign it to thumb drive
5. boot Windows 7 guest
6. verify that Windows 7 can see the thumb drive
7. use Windows Media Player to play MP3
Actual results:
guest hangs, then host powers off thumb drive
Expected results:
The MP3 file should play :)
Additional info:
Fedora 19
Installed Packages
qemu-common.x86_64 2:1.4.2-11.fc19 @updates
qemu-guest-agent.x86_64 2:1.4.2-11.fc19 @updates
qemu-img.x86_64 2:1.4.2-11.fc19 @updates
qemu-kvm.x86_64 2:1.4.2-11.fc19 @updates
qemu-system-x86.x86_64 2:1.4.2-11.fc19 @updates
virt-manager.noarch 0.10.0-3.fc19 @updates
kernel.x86_64 3.11.1-200.fc19 @updates
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1242765/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Qemu-devel] [Bug 1242765] Re: USB passthrough to Windows 7 guest fails with error -110, hangs
2013-10-21 15:54 [Qemu-devel] [Bug 1242765] [NEW] USB passthrough to Windows 7 guest fails with error -110, hangs Greg Sheremeta
@ 2017-01-25 9:04 ` Thomas Huth
2017-01-25 15:02 ` Greg Sheremeta
2017-01-25 16:11 ` Thomas Huth
2 siblings, 0 replies; 4+ messages in thread
From: Thomas Huth @ 2017-01-25 9:04 UTC (permalink / raw)
To: qemu-devel
Can you still reproduce this problem with the latest version of QEMU, or
could we close this ticket nowadays?
** Changed in: qemu
Status: New => Incomplete
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1242765
Title:
USB passthrough to Windows 7 guest fails with error -110, hangs
Status in QEMU:
Incomplete
Bug description:
Description of problem:
Using a Sandisk Cruzer Fit 16GB USB thumb drive.
Using virt-manager on Fedora 19 host, and Windows 7 32 bit guest.
I set up a USB2 controller on Windows 7 guest in virt-manager. Windows
sees the USB drive and can open the file manager and correctly show
the files. I can copy a file from the thumb drive to the Fedora
desktop, and then play the file on the desktop. However, any attempt
to open a file directly on the thumb drive (example, play an MP3 using
Windows Media Player) results in guest hang and host kernel messages:
Oct 19 21:15:35 localhost kernel: [187592.977839] usb 1-1.3: reset high-speed USB device number 13 using ehci-pci
Oct 19 21:15:40 localhost kernel: [187598.065274] usb 1-1.3: device descriptor read/all, error -110
Oct 19 21:15:40 localhost kernel: [187598.138167] usb 1-1.3: reset high-speed USB device number 13 using ehci-pci
Oct 19 21:15:56 localhost kernel: [187613.218119] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:16:11 localhost kernel: [187628.399275] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:16:11 localhost kernel: [187628.573355] usb 1-1.3: reset high-speed USB device number 13 using ehci-pci
Oct 19 21:16:16 localhost kernel: [187633.587778] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:16:21 localhost kernel: [187638.702244] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:16:21 localhost kernel: [187638.876201] usb 1-1.3: reset high-speed USB device number 13 using ehci-pci
Oct 19 21:16:26 localhost kernel: [187643.890642] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:16:31 localhost kernel: [187649.005071] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:16:31 localhost kernel: [187649.106188] usb 1-1.3: USB disconnect, device number 13
Oct 19 21:16:31 localhost kernel: [187649.178969] usb 1-1.3: new high-speed USB device number 14 using ehci-pci
Oct 19 21:16:47 localhost kernel: [187664.258945] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:17:02 localhost kernel: [187679.440092] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:17:02 localhost kernel: [187679.614194] usb 1-1.3: new high-speed USB device number 15 using ehci-pci
Oct 19 21:17:17 localhost kernel: [187694.694148] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:17:32 localhost kernel: [187709.875297] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:17:32 localhost kernel: [187710.049386] usb 1-1.3: new high-speed USB device number 16 using ehci-pci
Oct 19 21:17:37 localhost kernel: [187715.063803] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:17:41 localhost kernel: [187719.005453] usb 1-1.3: device descriptor read/8, error -71
After that -71 error, the thumb drive completely disappears from the
host, as if it is powered down.
I read that -110 is supposedly a power issue. I can play media files
directly from the thumb drive on the host, so the power seems fine on
the host.
How reproducible:
always
Steps to reproduce:
1. use virt-manager, create a Windows 7 32 bit guest
2. in virt-manager, set Controller USB to USB2
3. on host, insert Sandisk Cruser Fit thumb drive FAT32 format, with an MP3 file on it
4. in virt-manager, add a USB passthrough device and assign it to thumb drive
5. boot Windows 7 guest
6. verify that Windows 7 can see the thumb drive
7. use Windows Media Player to play MP3
Actual results:
guest hangs, then host powers off thumb drive
Expected results:
The MP3 file should play :)
Additional info:
Fedora 19
Installed Packages
qemu-common.x86_64 2:1.4.2-11.fc19 @updates
qemu-guest-agent.x86_64 2:1.4.2-11.fc19 @updates
qemu-img.x86_64 2:1.4.2-11.fc19 @updates
qemu-kvm.x86_64 2:1.4.2-11.fc19 @updates
qemu-system-x86.x86_64 2:1.4.2-11.fc19 @updates
virt-manager.noarch 0.10.0-3.fc19 @updates
kernel.x86_64 3.11.1-200.fc19 @updates
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1242765/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Qemu-devel] [Bug 1242765] Re: USB passthrough to Windows 7 guest fails with error -110, hangs
2013-10-21 15:54 [Qemu-devel] [Bug 1242765] [NEW] USB passthrough to Windows 7 guest fails with error -110, hangs Greg Sheremeta
2017-01-25 9:04 ` [Qemu-devel] [Bug 1242765] " Thomas Huth
@ 2017-01-25 15:02 ` Greg Sheremeta
2017-01-25 16:11 ` Thomas Huth
2 siblings, 0 replies; 4+ messages in thread
From: Greg Sheremeta @ 2017-01-25 15:02 UTC (permalink / raw)
To: qemu-devel
You may close. It's since worked fine for me.
Also the ticket is years old :D
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1242765
Title:
USB passthrough to Windows 7 guest fails with error -110, hangs
Status in QEMU:
Incomplete
Bug description:
Description of problem:
Using a Sandisk Cruzer Fit 16GB USB thumb drive.
Using virt-manager on Fedora 19 host, and Windows 7 32 bit guest.
I set up a USB2 controller on Windows 7 guest in virt-manager. Windows
sees the USB drive and can open the file manager and correctly show
the files. I can copy a file from the thumb drive to the Fedora
desktop, and then play the file on the desktop. However, any attempt
to open a file directly on the thumb drive (example, play an MP3 using
Windows Media Player) results in guest hang and host kernel messages:
Oct 19 21:15:35 localhost kernel: [187592.977839] usb 1-1.3: reset high-speed USB device number 13 using ehci-pci
Oct 19 21:15:40 localhost kernel: [187598.065274] usb 1-1.3: device descriptor read/all, error -110
Oct 19 21:15:40 localhost kernel: [187598.138167] usb 1-1.3: reset high-speed USB device number 13 using ehci-pci
Oct 19 21:15:56 localhost kernel: [187613.218119] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:16:11 localhost kernel: [187628.399275] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:16:11 localhost kernel: [187628.573355] usb 1-1.3: reset high-speed USB device number 13 using ehci-pci
Oct 19 21:16:16 localhost kernel: [187633.587778] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:16:21 localhost kernel: [187638.702244] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:16:21 localhost kernel: [187638.876201] usb 1-1.3: reset high-speed USB device number 13 using ehci-pci
Oct 19 21:16:26 localhost kernel: [187643.890642] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:16:31 localhost kernel: [187649.005071] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:16:31 localhost kernel: [187649.106188] usb 1-1.3: USB disconnect, device number 13
Oct 19 21:16:31 localhost kernel: [187649.178969] usb 1-1.3: new high-speed USB device number 14 using ehci-pci
Oct 19 21:16:47 localhost kernel: [187664.258945] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:17:02 localhost kernel: [187679.440092] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:17:02 localhost kernel: [187679.614194] usb 1-1.3: new high-speed USB device number 15 using ehci-pci
Oct 19 21:17:17 localhost kernel: [187694.694148] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:17:32 localhost kernel: [187709.875297] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:17:32 localhost kernel: [187710.049386] usb 1-1.3: new high-speed USB device number 16 using ehci-pci
Oct 19 21:17:37 localhost kernel: [187715.063803] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:17:41 localhost kernel: [187719.005453] usb 1-1.3: device descriptor read/8, error -71
After that -71 error, the thumb drive completely disappears from the
host, as if it is powered down.
I read that -110 is supposedly a power issue. I can play media files
directly from the thumb drive on the host, so the power seems fine on
the host.
How reproducible:
always
Steps to reproduce:
1. use virt-manager, create a Windows 7 32 bit guest
2. in virt-manager, set Controller USB to USB2
3. on host, insert Sandisk Cruser Fit thumb drive FAT32 format, with an MP3 file on it
4. in virt-manager, add a USB passthrough device and assign it to thumb drive
5. boot Windows 7 guest
6. verify that Windows 7 can see the thumb drive
7. use Windows Media Player to play MP3
Actual results:
guest hangs, then host powers off thumb drive
Expected results:
The MP3 file should play :)
Additional info:
Fedora 19
Installed Packages
qemu-common.x86_64 2:1.4.2-11.fc19 @updates
qemu-guest-agent.x86_64 2:1.4.2-11.fc19 @updates
qemu-img.x86_64 2:1.4.2-11.fc19 @updates
qemu-kvm.x86_64 2:1.4.2-11.fc19 @updates
qemu-system-x86.x86_64 2:1.4.2-11.fc19 @updates
virt-manager.noarch 0.10.0-3.fc19 @updates
kernel.x86_64 3.11.1-200.fc19 @updates
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1242765/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Qemu-devel] [Bug 1242765] Re: USB passthrough to Windows 7 guest fails with error -110, hangs
2013-10-21 15:54 [Qemu-devel] [Bug 1242765] [NEW] USB passthrough to Windows 7 guest fails with error -110, hangs Greg Sheremeta
2017-01-25 9:04 ` [Qemu-devel] [Bug 1242765] " Thomas Huth
2017-01-25 15:02 ` Greg Sheremeta
@ 2017-01-25 16:11 ` Thomas Huth
2 siblings, 0 replies; 4+ messages in thread
From: Thomas Huth @ 2017-01-25 16:11 UTC (permalink / raw)
To: qemu-devel
** Changed in: qemu
Status: Incomplete => Fix Released
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1242765
Title:
USB passthrough to Windows 7 guest fails with error -110, hangs
Status in QEMU:
Fix Released
Bug description:
Description of problem:
Using a Sandisk Cruzer Fit 16GB USB thumb drive.
Using virt-manager on Fedora 19 host, and Windows 7 32 bit guest.
I set up a USB2 controller on Windows 7 guest in virt-manager. Windows
sees the USB drive and can open the file manager and correctly show
the files. I can copy a file from the thumb drive to the Fedora
desktop, and then play the file on the desktop. However, any attempt
to open a file directly on the thumb drive (example, play an MP3 using
Windows Media Player) results in guest hang and host kernel messages:
Oct 19 21:15:35 localhost kernel: [187592.977839] usb 1-1.3: reset high-speed USB device number 13 using ehci-pci
Oct 19 21:15:40 localhost kernel: [187598.065274] usb 1-1.3: device descriptor read/all, error -110
Oct 19 21:15:40 localhost kernel: [187598.138167] usb 1-1.3: reset high-speed USB device number 13 using ehci-pci
Oct 19 21:15:56 localhost kernel: [187613.218119] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:16:11 localhost kernel: [187628.399275] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:16:11 localhost kernel: [187628.573355] usb 1-1.3: reset high-speed USB device number 13 using ehci-pci
Oct 19 21:16:16 localhost kernel: [187633.587778] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:16:21 localhost kernel: [187638.702244] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:16:21 localhost kernel: [187638.876201] usb 1-1.3: reset high-speed USB device number 13 using ehci-pci
Oct 19 21:16:26 localhost kernel: [187643.890642] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:16:31 localhost kernel: [187649.005071] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:16:31 localhost kernel: [187649.106188] usb 1-1.3: USB disconnect, device number 13
Oct 19 21:16:31 localhost kernel: [187649.178969] usb 1-1.3: new high-speed USB device number 14 using ehci-pci
Oct 19 21:16:47 localhost kernel: [187664.258945] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:17:02 localhost kernel: [187679.440092] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:17:02 localhost kernel: [187679.614194] usb 1-1.3: new high-speed USB device number 15 using ehci-pci
Oct 19 21:17:17 localhost kernel: [187694.694148] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:17:32 localhost kernel: [187709.875297] usb 1-1.3: device descriptor read/64, error -110
Oct 19 21:17:32 localhost kernel: [187710.049386] usb 1-1.3: new high-speed USB device number 16 using ehci-pci
Oct 19 21:17:37 localhost kernel: [187715.063803] usb 1-1.3: device descriptor read/8, error -110
Oct 19 21:17:41 localhost kernel: [187719.005453] usb 1-1.3: device descriptor read/8, error -71
After that -71 error, the thumb drive completely disappears from the
host, as if it is powered down.
I read that -110 is supposedly a power issue. I can play media files
directly from the thumb drive on the host, so the power seems fine on
the host.
How reproducible:
always
Steps to reproduce:
1. use virt-manager, create a Windows 7 32 bit guest
2. in virt-manager, set Controller USB to USB2
3. on host, insert Sandisk Cruser Fit thumb drive FAT32 format, with an MP3 file on it
4. in virt-manager, add a USB passthrough device and assign it to thumb drive
5. boot Windows 7 guest
6. verify that Windows 7 can see the thumb drive
7. use Windows Media Player to play MP3
Actual results:
guest hangs, then host powers off thumb drive
Expected results:
The MP3 file should play :)
Additional info:
Fedora 19
Installed Packages
qemu-common.x86_64 2:1.4.2-11.fc19 @updates
qemu-guest-agent.x86_64 2:1.4.2-11.fc19 @updates
qemu-img.x86_64 2:1.4.2-11.fc19 @updates
qemu-kvm.x86_64 2:1.4.2-11.fc19 @updates
qemu-system-x86.x86_64 2:1.4.2-11.fc19 @updates
virt-manager.noarch 0.10.0-3.fc19 @updates
kernel.x86_64 3.11.1-200.fc19 @updates
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1242765/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-01-25 16:25 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-10-21 15:54 [Qemu-devel] [Bug 1242765] [NEW] USB passthrough to Windows 7 guest fails with error -110, hangs Greg Sheremeta
2017-01-25 9:04 ` [Qemu-devel] [Bug 1242765] " Thomas Huth
2017-01-25 15:02 ` Greg Sheremeta
2017-01-25 16:11 ` Thomas Huth
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.