* [PATCH] drm/fourcc: add vivante tiled layout format modifiers
@ 2017-01-26 15:32 Philipp Zabel
2017-01-26 17:24 ` Daniel Vetter
0 siblings, 1 reply; 6+ messages in thread
From: Philipp Zabel @ 2017-01-26 15:32 UTC (permalink / raw)
To: dri-devel; +Cc: Wladimir J . van der Laan, etnaviv
Vivante GC hardware uses simple 4x4 tiled and nested 64x64 supertiled
formats as well as so-called split-tiled variants for dual-pipe
hardware, where even and odd tiles start at different base addresses.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
include/uapi/drm/drm_fourcc.h | 41 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h
index a5890bf44c0af..ec0498cf61756 100644
--- a/include/uapi/drm/drm_fourcc.h
+++ b/include/uapi/drm/drm_fourcc.h
@@ -159,6 +159,7 @@ extern "C" {
#define DRM_FORMAT_MOD_VENDOR_NV 0x03
#define DRM_FORMAT_MOD_VENDOR_SAMSUNG 0x04
#define DRM_FORMAT_MOD_VENDOR_QCOM 0x05
+#define DRM_FORMAT_MOD_VENDOR_VIVANTE 0x06
/* add more to the end as needed */
#define fourcc_mod_code(vendor, val) \
@@ -233,6 +234,46 @@ extern "C" {
*/
#define DRM_FORMAT_MOD_SAMSUNG_64_32_TILE fourcc_mod_code(SAMSUNG, 1)
+/* Vivante framebuffer modifiers */
+
+/*
+ * Vivante 4x4 tiling layout
+ *
+ * This is a simple tiled layout using tiles of 4x4 pixels in a row-major
+ * layout.
+ */
+#define DRM_FORMAT_MOD_VIVANTE_TILED fourcc_mod_code(VIVANTE, 1)
+
+/*
+ * Vivante 64x64 super-tiling layout
+ *
+ * This is a tiled layout using 64x64 pixel super-tiles, where each super-tile
+ * contains 8x4 groups of 2x4 tiles of 4x4 pixels (like above) each, all in row-
+ * major layout.
+ *
+ * For more information: see
+ * https://github.com/etnaviv/etna_viv/blob/master/doc/hardware.md#texture-tiling
+ */
+#define DRM_FORMAT_MOD_VIVANTE_SUPER_TILED fourcc_mod_code(VIVANTE, 2)
+
+/*
+ * Vivante 4x4 tiling layout for dual-pipe
+ *
+ * Same as the 4x4 tiling layout, except every second 4x4 pixel tile starts at a
+ * different base address. Offsets from the base addresses are therefore halved
+ * compared to the non-split tiled layout.
+ */
+#define DRM_FORMAT_MOD_VIVANTE_SPLIT_TILED fourcc_mod_code(VIVANTE, 3)
+
+/*
+ * Vivante 64x64 super-tiling layout for dual-pipe
+ *
+ * Same as the 64x64 super-tiling layout, except every second 4x4 pixel tile
+ * starts at a different base address. Offsets from the base addresses are
+ * therefore halved compared to the non-split super-tiled layout.
+ */
+#define DRM_FORMAT_MOD_VIVANTE_SPLIT_SUPER_TILED fourcc_mod_code(VIVANTE, 4)
+
#if defined(__cplusplus)
}
#endif
--
2.11.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH] drm/fourcc: add vivante tiled layout format modifiers
2017-01-26 15:32 [PATCH] drm/fourcc: add vivante tiled layout format modifiers Philipp Zabel
@ 2017-01-26 17:24 ` Daniel Vetter
2017-01-26 18:29 ` Wladimir J. van der Laan
2017-01-27 9:09 ` Lucas Stach
0 siblings, 2 replies; 6+ messages in thread
From: Daniel Vetter @ 2017-01-26 17:24 UTC (permalink / raw)
To: Philipp Zabel; +Cc: Wladimir J . van der Laan, etnaviv, dri-devel
On Thu, Jan 26, 2017 at 04:32:17PM +0100, Philipp Zabel wrote:
> Vivante GC hardware uses simple 4x4 tiled and nested 64x64 supertiled
> formats as well as so-called split-tiled variants for dual-pipe
> hardware, where even and odd tiles start at different base addresses.
>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> ---
> include/uapi/drm/drm_fourcc.h | 41 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 41 insertions(+)
>
> diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h
> index a5890bf44c0af..ec0498cf61756 100644
> --- a/include/uapi/drm/drm_fourcc.h
> +++ b/include/uapi/drm/drm_fourcc.h
> @@ -159,6 +159,7 @@ extern "C" {
> #define DRM_FORMAT_MOD_VENDOR_NV 0x03
> #define DRM_FORMAT_MOD_VENDOR_SAMSUNG 0x04
> #define DRM_FORMAT_MOD_VENDOR_QCOM 0x05
> +#define DRM_FORMAT_MOD_VENDOR_VIVANTE 0x06
> /* add more to the end as needed */
>
> #define fourcc_mod_code(vendor, val) \
> @@ -233,6 +234,46 @@ extern "C" {
> */
> #define DRM_FORMAT_MOD_SAMSUNG_64_32_TILE fourcc_mod_code(SAMSUNG, 1)
>
> +/* Vivante framebuffer modifiers */
> +
> +/*
> + * Vivante 4x4 tiling layout
> + *
> + * This is a simple tiled layout using tiles of 4x4 pixels in a row-major
> + * layout.
> + */
> +#define DRM_FORMAT_MOD_VIVANTE_TILED fourcc_mod_code(VIVANTE, 1)
> +
> +/*
> + * Vivante 64x64 super-tiling layout
> + *
> + * This is a tiled layout using 64x64 pixel super-tiles, where each super-tile
> + * contains 8x4 groups of 2x4 tiles of 4x4 pixels (like above) each, all in row-
> + * major layout.
> + *
> + * For more information: see
> + * https://github.com/etnaviv/etna_viv/blob/master/doc/hardware.md#texture-tiling
> + */
> +#define DRM_FORMAT_MOD_VIVANTE_SUPER_TILED fourcc_mod_code(VIVANTE, 2)
> +
> +/*
> + * Vivante 4x4 tiling layout for dual-pipe
> + *
> + * Same as the 4x4 tiling layout, except every second 4x4 pixel tile starts at a
> + * different base address. Offsets from the base addresses are therefore halved
> + * compared to the non-split tiled layout.
> + */
> +#define DRM_FORMAT_MOD_VIVANTE_SPLIT_TILED fourcc_mod_code(VIVANTE, 3)
> +
> +/*
> + * Vivante 64x64 super-tiling layout for dual-pipe
> + *
> + * Same as the 64x64 super-tiling layout, except every second 4x4 pixel tile
> + * starts at a different base address. Offsets from the base addresses are
> + * therefore halved compared to the non-split super-tiled layout.
> + */
> +#define DRM_FORMAT_MOD_VIVANTE_SPLIT_SUPER_TILED fourcc_mod_code(VIVANTE, 4)
Does this mean the dual-pipe stuff has 2 planes? Do you need Ville's
driver-private format stuff for this?
Also, someone else with clue needs to review this before I can pull it in
:-)
-Daniel
> +
> #if defined(__cplusplus)
> }
> #endif
> --
> 2.11.0
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] drm/fourcc: add vivante tiled layout format modifiers
2017-01-26 17:24 ` Daniel Vetter
@ 2017-01-26 18:29 ` Wladimir J. van der Laan
2017-01-27 7:34 ` Daniel Vetter
2017-01-27 9:44 ` Philipp Zabel
2017-01-27 9:09 ` Lucas Stach
1 sibling, 2 replies; 6+ messages in thread
From: Wladimir J. van der Laan @ 2017-01-26 18:29 UTC (permalink / raw)
To: Daniel Vetter; +Cc: dri-devel, etnaviv
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
I do wonder whether we'll need the split formats in practice -
e.g. the GC3000 on the i.MX6qp, for which I suppose this is being done because
of tiled buffers support in the PRE, has the "single buffer" feature
which allows rendering to a single buffer with multiple pixel pipes.
This is what the Vivante driver uses.
But it can't hurt reserving formats for them.
Wladimir
> > Vivante GC hardware uses simple 4x4 tiled and nested 64x64 supertiled
> > formats as well as so-called split-tiled variants for dual-pipe
> > hardware, where even and odd tiles start at different base addresses.
> >
> > Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> > ---
> > include/uapi/drm/drm_fourcc.h | 41 +++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 41 insertions(+)
> >
> > diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h
> > index a5890bf44c0af..ec0498cf61756 100644
> > --- a/include/uapi/drm/drm_fourcc.h
> > +++ b/include/uapi/drm/drm_fourcc.h
> > @@ -159,6 +159,7 @@ extern "C" {
> > #define DRM_FORMAT_MOD_VENDOR_NV 0x03
> > #define DRM_FORMAT_MOD_VENDOR_SAMSUNG 0x04
> > #define DRM_FORMAT_MOD_VENDOR_QCOM 0x05
> > +#define DRM_FORMAT_MOD_VENDOR_VIVANTE 0x06
> > /* add more to the end as needed */
> >
> > #define fourcc_mod_code(vendor, val) \
> > @@ -233,6 +234,46 @@ extern "C" {
> > */
> > #define DRM_FORMAT_MOD_SAMSUNG_64_32_TILE fourcc_mod_code(SAMSUNG, 1)
> >
> > +/* Vivante framebuffer modifiers */
> > +
> > +/*
> > + * Vivante 4x4 tiling layout
> > + *
> > + * This is a simple tiled layout using tiles of 4x4 pixels in a row-major
> > + * layout.
> > + */
> > +#define DRM_FORMAT_MOD_VIVANTE_TILED fourcc_mod_code(VIVANTE, 1)
> > +
> > +/*
> > + * Vivante 64x64 super-tiling layout
> > + *
> > + * This is a tiled layout using 64x64 pixel super-tiles, where each super-tile
> > + * contains 8x4 groups of 2x4 tiles of 4x4 pixels (like above) each, all in row-
> > + * major layout.
> > + *
> > + * For more information: see
> > + * https://github.com/etnaviv/etna_viv/blob/master/doc/hardware.md#texture-tiling
> > + */
> > +#define DRM_FORMAT_MOD_VIVANTE_SUPER_TILED fourcc_mod_code(VIVANTE, 2)
> > +
> > +/*
> > + * Vivante 4x4 tiling layout for dual-pipe
> > + *
> > + * Same as the 4x4 tiling layout, except every second 4x4 pixel tile starts at a
> > + * different base address. Offsets from the base addresses are therefore halved
> > + * compared to the non-split tiled layout.
> > + */
> > +#define DRM_FORMAT_MOD_VIVANTE_SPLIT_TILED fourcc_mod_code(VIVANTE, 3)
> > +
> > +/*
> > + * Vivante 64x64 super-tiling layout for dual-pipe
> > + *
> > + * Same as the 64x64 super-tiling layout, except every second 4x4 pixel tile
> > + * starts at a different base address. Offsets from the base addresses are
> > + * therefore halved compared to the non-split super-tiled layout.
> > + */
> > +#define DRM_FORMAT_MOD_VIVANTE_SPLIT_SUPER_TILED fourcc_mod_code(VIVANTE, 4)
>
> Does this mean the dual-pipe stuff has 2 planes? Do you need Ville's
> driver-private format stuff for this?
>
> Also, someone else with clue needs to review this before I can pull it in
> :-)
> -Daniel
>
> > +
> > #if defined(__cplusplus)
> > }
> > #endif
> > --
> > 2.11.0
> >
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] drm/fourcc: add vivante tiled layout format modifiers
2017-01-26 18:29 ` Wladimir J. van der Laan
@ 2017-01-27 7:34 ` Daniel Vetter
2017-01-27 9:44 ` Philipp Zabel
1 sibling, 0 replies; 6+ messages in thread
From: Daniel Vetter @ 2017-01-27 7:34 UTC (permalink / raw)
To: Wladimir J. van der Laan; +Cc: dri-devel, etnaviv
On Thu, Jan 26, 2017 at 07:29:13PM +0100, Wladimir J. van der Laan wrote:
>
> Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
>
> I do wonder whether we'll need the split formats in practice -
> e.g. the GC3000 on the i.MX6qp, for which I suppose this is being done because
> of tiled buffers support in the PRE, has the "single buffer" feature
> which allows rendering to a single buffer with multiple pixel pipes.
> This is what the Vivante driver uses.
>
> But it can't hurt reserving formats for them.
Yeah, no harm in reserving&documenting them. Patch applied to drm-misc,
I'll probably only do a pull request for it early next week due to -rc6
backmerge reasons.
-Daniel
>
> Wladimir
>
> > > Vivante GC hardware uses simple 4x4 tiled and nested 64x64 supertiled
> > > formats as well as so-called split-tiled variants for dual-pipe
> > > hardware, where even and odd tiles start at different base addresses.
> > >
> > > Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> > > ---
> > > include/uapi/drm/drm_fourcc.h | 41 +++++++++++++++++++++++++++++++++++++++++
> > > 1 file changed, 41 insertions(+)
> > >
> > > diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h
> > > index a5890bf44c0af..ec0498cf61756 100644
> > > --- a/include/uapi/drm/drm_fourcc.h
> > > +++ b/include/uapi/drm/drm_fourcc.h
> > > @@ -159,6 +159,7 @@ extern "C" {
> > > #define DRM_FORMAT_MOD_VENDOR_NV 0x03
> > > #define DRM_FORMAT_MOD_VENDOR_SAMSUNG 0x04
> > > #define DRM_FORMAT_MOD_VENDOR_QCOM 0x05
> > > +#define DRM_FORMAT_MOD_VENDOR_VIVANTE 0x06
> > > /* add more to the end as needed */
> > >
> > > #define fourcc_mod_code(vendor, val) \
> > > @@ -233,6 +234,46 @@ extern "C" {
> > > */
> > > #define DRM_FORMAT_MOD_SAMSUNG_64_32_TILE fourcc_mod_code(SAMSUNG, 1)
> > >
> > > +/* Vivante framebuffer modifiers */
> > > +
> > > +/*
> > > + * Vivante 4x4 tiling layout
> > > + *
> > > + * This is a simple tiled layout using tiles of 4x4 pixels in a row-major
> > > + * layout.
> > > + */
> > > +#define DRM_FORMAT_MOD_VIVANTE_TILED fourcc_mod_code(VIVANTE, 1)
> > > +
> > > +/*
> > > + * Vivante 64x64 super-tiling layout
> > > + *
> > > + * This is a tiled layout using 64x64 pixel super-tiles, where each super-tile
> > > + * contains 8x4 groups of 2x4 tiles of 4x4 pixels (like above) each, all in row-
> > > + * major layout.
> > > + *
> > > + * For more information: see
> > > + * https://github.com/etnaviv/etna_viv/blob/master/doc/hardware.md#texture-tiling
> > > + */
> > > +#define DRM_FORMAT_MOD_VIVANTE_SUPER_TILED fourcc_mod_code(VIVANTE, 2)
> > > +
> > > +/*
> > > + * Vivante 4x4 tiling layout for dual-pipe
> > > + *
> > > + * Same as the 4x4 tiling layout, except every second 4x4 pixel tile starts at a
> > > + * different base address. Offsets from the base addresses are therefore halved
> > > + * compared to the non-split tiled layout.
> > > + */
> > > +#define DRM_FORMAT_MOD_VIVANTE_SPLIT_TILED fourcc_mod_code(VIVANTE, 3)
> > > +
> > > +/*
> > > + * Vivante 64x64 super-tiling layout for dual-pipe
> > > + *
> > > + * Same as the 64x64 super-tiling layout, except every second 4x4 pixel tile
> > > + * starts at a different base address. Offsets from the base addresses are
> > > + * therefore halved compared to the non-split super-tiled layout.
> > > + */
> > > +#define DRM_FORMAT_MOD_VIVANTE_SPLIT_SUPER_TILED fourcc_mod_code(VIVANTE, 4)
> >
> > Does this mean the dual-pipe stuff has 2 planes? Do you need Ville's
> > driver-private format stuff for this?
> >
> > Also, someone else with clue needs to review this before I can pull it in
> > :-)
> > -Daniel
> >
> > > +
> > > #if defined(__cplusplus)
> > > }
> > > #endif
> > > --
> > > 2.11.0
> > >
> > > _______________________________________________
> > > dri-devel mailing list
> > > dri-devel@lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> >
> > --
> > Daniel Vetter
> > Software Engineer, Intel Corporation
> > http://blog.ffwll.ch
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] drm/fourcc: add vivante tiled layout format modifiers
2017-01-26 18:29 ` Wladimir J. van der Laan
2017-01-27 7:34 ` Daniel Vetter
@ 2017-01-27 9:44 ` Philipp Zabel
1 sibling, 0 replies; 6+ messages in thread
From: Philipp Zabel @ 2017-01-27 9:44 UTC (permalink / raw)
To: Wladimir J. van der Laan; +Cc: dri-devel, etnaviv
On Thu, 2017-01-26 at 19:29 +0100, Wladimir J. van der Laan wrote:
> Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
Thank you.
> I do wonder whether we'll need the split formats in practice -
> e.g. the GC3000 on the i.MX6qp, for which I suppose this is being done because
> of tiled buffers support in the PRE, has the "single buffer" feature
> which allows rendering to a single buffer with multiple pixel pipes.
> This is what the Vivante driver uses.
>
> But it can't hurt reserving formats for them.
I added them in case it later turns out that avoiding the resolve copy
is advantageous on GC2000 in combination with USB DisplayLink style
outputs, where the CPU could directly process the split-tiled buffers.
regards
Philipp
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] drm/fourcc: add vivante tiled layout format modifiers
2017-01-26 17:24 ` Daniel Vetter
2017-01-26 18:29 ` Wladimir J. van der Laan
@ 2017-01-27 9:09 ` Lucas Stach
1 sibling, 0 replies; 6+ messages in thread
From: Lucas Stach @ 2017-01-27 9:09 UTC (permalink / raw)
To: Daniel Vetter; +Cc: dri-devel, Wladimir J . van der Laan, etnaviv
Am Donnerstag, den 26.01.2017, 18:24 +0100 schrieb Daniel Vetter:
> On Thu, Jan 26, 2017 at 04:32:17PM +0100, Philipp Zabel wrote:
> > Vivante GC hardware uses simple 4x4 tiled and nested 64x64 supertiled
> > formats as well as so-called split-tiled variants for dual-pipe
> > hardware, where even and odd tiles start at different base addresses.
> >
> > Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> > ---
> > include/uapi/drm/drm_fourcc.h | 41 +++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 41 insertions(+)
> >
> > diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h
> > index a5890bf44c0af..ec0498cf61756 100644
> > --- a/include/uapi/drm/drm_fourcc.h
> > +++ b/include/uapi/drm/drm_fourcc.h
> > @@ -159,6 +159,7 @@ extern "C" {
> > #define DRM_FORMAT_MOD_VENDOR_NV 0x03
> > #define DRM_FORMAT_MOD_VENDOR_SAMSUNG 0x04
> > #define DRM_FORMAT_MOD_VENDOR_QCOM 0x05
> > +#define DRM_FORMAT_MOD_VENDOR_VIVANTE 0x06
> > /* add more to the end as needed */
> >
> > #define fourcc_mod_code(vendor, val) \
> > @@ -233,6 +234,46 @@ extern "C" {
> > */
> > #define DRM_FORMAT_MOD_SAMSUNG_64_32_TILE fourcc_mod_code(SAMSUNG, 1)
> >
> > +/* Vivante framebuffer modifiers */
> > +
> > +/*
> > + * Vivante 4x4 tiling layout
> > + *
> > + * This is a simple tiled layout using tiles of 4x4 pixels in a row-major
> > + * layout.
> > + */
> > +#define DRM_FORMAT_MOD_VIVANTE_TILED fourcc_mod_code(VIVANTE, 1)
> > +
> > +/*
> > + * Vivante 64x64 super-tiling layout
> > + *
> > + * This is a tiled layout using 64x64 pixel super-tiles, where each super-tile
> > + * contains 8x4 groups of 2x4 tiles of 4x4 pixels (like above) each, all in row-
> > + * major layout.
> > + *
> > + * For more information: see
> > + * https://github.com/etnaviv/etna_viv/blob/master/doc/hardware.md#texture-tiling
> > + */
> > +#define DRM_FORMAT_MOD_VIVANTE_SUPER_TILED fourcc_mod_code(VIVANTE, 2)
> > +
> > +/*
> > + * Vivante 4x4 tiling layout for dual-pipe
> > + *
> > + * Same as the 4x4 tiling layout, except every second 4x4 pixel tile starts at a
> > + * different base address. Offsets from the base addresses are therefore halved
> > + * compared to the non-split tiled layout.
> > + */
> > +#define DRM_FORMAT_MOD_VIVANTE_SPLIT_TILED fourcc_mod_code(VIVANTE, 3)
> > +
> > +/*
> > + * Vivante 64x64 super-tiling layout for dual-pipe
> > + *
> > + * Same as the 64x64 super-tiling layout, except every second 4x4 pixel tile
> > + * starts at a different base address. Offsets from the base addresses are
> > + * therefore halved compared to the non-split super-tiled layout.
> > + */
> > +#define DRM_FORMAT_MOD_VIVANTE_SPLIT_SUPER_TILED fourcc_mod_code(VIVANTE, 4)
>
> Does this mean the dual-pipe stuff has 2 planes? Do you need Ville's
> driver-private format stuff for this?
Nope, it's a single plane, but the pipes using different offsets within
the plane.
As the pipe address registers are freely configurable we could push the
render output into 2 planes, but why make our life hard for no
reason? :)
Regards,
Lucas
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-01-27 9:44 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-01-26 15:32 [PATCH] drm/fourcc: add vivante tiled layout format modifiers Philipp Zabel
2017-01-26 17:24 ` Daniel Vetter
2017-01-26 18:29 ` Wladimir J. van der Laan
2017-01-27 7:34 ` Daniel Vetter
2017-01-27 9:44 ` Philipp Zabel
2017-01-27 9:09 ` Lucas Stach
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.