* [PATCH 0/3] Enable SPDIF on the Beelink X2
@ 2017-01-27 15:48 ` codekipper at gmail.com
0 siblings, 0 replies; 10+ messages in thread
From: codekipper-Re5JQEeQqe8AvxtiuMwx3w @ 2017-01-27 15:48 UTC (permalink / raw)
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Marcus Cooper
From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Hi All,
here is the patchset required to get SPDIF working on the Beelink X2
which is a H3 based STB.
BR,
CK
Marcus Cooper (3):
ARM: dts: sun8i-h3: Add SPDIF TX pin to the H3
ARM: dts: sun8i-h3: Add the SPDIF block to the H3
ARM: dts: sun8i-h3: Add SPDIF to the Beelink X2
arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 24 ++++++++++++++++++++++++
arch/arm/boot/dts/sun8i-h3.dtsi | 18 ++++++++++++++++++
2 files changed, 42 insertions(+)
--
2.11.0
^ permalink raw reply [flat|nested] 10+ messages in thread
* [linux-sunxi][PATCH 0/3] Enable SPDIF on the Beelink X2
@ 2017-01-27 15:48 ` codekipper at gmail.com
0 siblings, 0 replies; 10+ messages in thread
From: codekipper at gmail.com @ 2017-01-27 15:48 UTC (permalink / raw)
To: linux-arm-kernel
From: Marcus Cooper <codekipper@gmail.com>
Hi All,
here is the patchset required to get SPDIF working on the Beelink X2
which is a H3 based STB.
BR,
CK
Marcus Cooper (3):
ARM: dts: sun8i-h3: Add SPDIF TX pin to the H3
ARM: dts: sun8i-h3: Add the SPDIF block to the H3
ARM: dts: sun8i-h3: Add SPDIF to the Beelink X2
arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 24 ++++++++++++++++++++++++
arch/arm/boot/dts/sun8i-h3.dtsi | 18 ++++++++++++++++++
2 files changed, 42 insertions(+)
--
2.11.0
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 1/3] ARM: dts: sun8i-h3: Add SPDIF TX pin to the H3
2017-01-27 15:48 ` [linux-sunxi][PATCH " codekipper at gmail.com
@ 2017-01-27 15:48 ` codekipper at gmail.com
-1 siblings, 0 replies; 10+ messages in thread
From: codekipper-Re5JQEeQqe8AvxtiuMwx3w @ 2017-01-27 15:48 UTC (permalink / raw)
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Marcus Cooper
From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Add the SPDIF TX pin to the H3 dtsi.
Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/sun8i-h3.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 08fd0860bb6b..6e250bd9a8a9 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -375,6 +375,11 @@
bias-pull-up;
};
+ spdif_tx_pins_a: spdif@0 {
+ pins = "PA17";
+ function = "spdif";
+ };
+
spi0_pins: spi0 {
pins = "PC0", "PC1", "PC2", "PC3";
function = "spi0";
--
2.11.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [linux-sunxi][PATCH 1/3] ARM: dts: sun8i-h3: Add SPDIF TX pin to the H3
@ 2017-01-27 15:48 ` codekipper at gmail.com
0 siblings, 0 replies; 10+ messages in thread
From: codekipper at gmail.com @ 2017-01-27 15:48 UTC (permalink / raw)
To: linux-arm-kernel
From: Marcus Cooper <codekipper@gmail.com>
Add the SPDIF TX pin to the H3 dtsi.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
arch/arm/boot/dts/sun8i-h3.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 08fd0860bb6b..6e250bd9a8a9 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -375,6 +375,11 @@
bias-pull-up;
};
+ spdif_tx_pins_a: spdif at 0 {
+ pins = "PA17";
+ function = "spdif";
+ };
+
spi0_pins: spi0 {
pins = "PC0", "PC1", "PC2", "PC3";
function = "spi0";
--
2.11.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/3] ARM: dts: sun8i-h3: Add the SPDIF block to the H3
2017-01-27 15:48 ` [linux-sunxi][PATCH " codekipper at gmail.com
@ 2017-01-27 15:48 ` codekipper at gmail.com
-1 siblings, 0 replies; 10+ messages in thread
From: codekipper-Re5JQEeQqe8AvxtiuMwx3w @ 2017-01-27 15:48 UTC (permalink / raw)
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Marcus Cooper
From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Add the SPDIF transceiver controller block to the H3 dtsi.
Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/sun8i-h3.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 6e250bd9a8a9..48f9a0419b82 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -462,6 +462,19 @@
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
};
+ spdif: spdif@01c21000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-h3-spdif";
+ reg = <0x01c21000 0x400>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+ resets = <&ccu RST_BUS_SPDIF>;
+ clock-names = "apb", "spdif";
+ dmas = <&dma 2>;
+ dma-names = "tx";
+ status = "disabled";
+ };
+
pwm: pwm@01c21400 {
compatible = "allwinner,sun8i-h3-pwm";
reg = <0x01c21400 0x8>;
--
2.11.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [linux-sunxi][PATCH 2/3] ARM: dts: sun8i-h3: Add the SPDIF block to the H3
@ 2017-01-27 15:48 ` codekipper at gmail.com
0 siblings, 0 replies; 10+ messages in thread
From: codekipper at gmail.com @ 2017-01-27 15:48 UTC (permalink / raw)
To: linux-arm-kernel
From: Marcus Cooper <codekipper@gmail.com>
Add the SPDIF transceiver controller block to the H3 dtsi.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
arch/arm/boot/dts/sun8i-h3.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 6e250bd9a8a9..48f9a0419b82 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -462,6 +462,19 @@
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
};
+ spdif: spdif at 01c21000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-h3-spdif";
+ reg = <0x01c21000 0x400>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+ resets = <&ccu RST_BUS_SPDIF>;
+ clock-names = "apb", "spdif";
+ dmas = <&dma 2>;
+ dma-names = "tx";
+ status = "disabled";
+ };
+
pwm: pwm at 01c21400 {
compatible = "allwinner,sun8i-h3-pwm";
reg = <0x01c21400 0x8>;
--
2.11.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 3/3] ARM: dts: sun8i-h3: Add SPDIF to the Beelink X2
2017-01-27 15:48 ` [linux-sunxi][PATCH " codekipper at gmail.com
@ 2017-01-27 15:48 ` codekipper at gmail.com
-1 siblings, 0 replies; 10+ messages in thread
From: codekipper-Re5JQEeQqe8AvxtiuMwx3w @ 2017-01-27 15:48 UTC (permalink / raw)
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Marcus Cooper
From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Enable the S/PDIF transmitter that is present on the Beelink X2 STB.
Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
index 2a016cd16a27..25b225b7dfd6 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@@ -81,6 +81,24 @@
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
};
+
+ sound_spdif {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "On-board SPDIF";
+
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ spdif_out: spdif-out {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ };
};
&ehci1 {
@@ -124,6 +142,12 @@
status = "okay";
};
+&spdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_tx_pins_a>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
--
2.11.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [linux-sunxi][PATCH 3/3] ARM: dts: sun8i-h3: Add SPDIF to the Beelink X2
@ 2017-01-27 15:48 ` codekipper at gmail.com
0 siblings, 0 replies; 10+ messages in thread
From: codekipper at gmail.com @ 2017-01-27 15:48 UTC (permalink / raw)
To: linux-arm-kernel
From: Marcus Cooper <codekipper@gmail.com>
Enable the S/PDIF transmitter that is present on the Beelink X2 STB.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
index 2a016cd16a27..25b225b7dfd6 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@@ -81,6 +81,24 @@
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
};
+
+ sound_spdif {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "On-board SPDIF";
+
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ spdif_out: spdif-out {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ };
};
&ehci1 {
@@ -124,6 +142,12 @@
status = "okay";
};
+&spdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_tx_pins_a>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
--
2.11.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 0/3] Enable SPDIF on the Beelink X2
2017-01-27 15:48 ` [linux-sunxi][PATCH " codekipper at gmail.com
@ 2017-01-27 20:10 ` Maxime Ripard
-1 siblings, 0 replies; 10+ messages in thread
From: Maxime Ripard @ 2017-01-27 20:10 UTC (permalink / raw)
To: codekipper-Re5JQEeQqe8AvxtiuMwx3w
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw
[-- Attachment #1: Type: text/plain, Size: 499 bytes --]
On Fri, Jan 27, 2017 at 04:48:05PM +0100, codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote:
> From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>
> Hi All,
>
> here is the patchset required to get SPDIF working on the Beelink X2
> which is a H3 based STB.
>
> BR,
> CK
Merged all three, but this could have been in your earlier patch for
that board.
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 10+ messages in thread
* [linux-sunxi][PATCH 0/3] Enable SPDIF on the Beelink X2
@ 2017-01-27 20:10 ` Maxime Ripard
0 siblings, 0 replies; 10+ messages in thread
From: Maxime Ripard @ 2017-01-27 20:10 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Jan 27, 2017 at 04:48:05PM +0100, codekipper at gmail.com wrote:
> From: Marcus Cooper <codekipper@gmail.com>
>
> Hi All,
>
> here is the patchset required to get SPDIF working on the Beelink X2
> which is a H3 based STB.
>
> BR,
> CK
Merged all three, but this could have been in your earlier patch for
that board.
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170127/0f157ba3/attachment-0001.sig>
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2017-01-27 20:10 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-01-27 15:48 [PATCH 0/3] Enable SPDIF on the Beelink X2 codekipper-Re5JQEeQqe8AvxtiuMwx3w
2017-01-27 15:48 ` [linux-sunxi][PATCH " codekipper at gmail.com
[not found] ` <20170127154808.19229-1-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-01-27 15:48 ` [PATCH 1/3] ARM: dts: sun8i-h3: Add SPDIF TX pin to the H3 codekipper-Re5JQEeQqe8AvxtiuMwx3w
2017-01-27 15:48 ` [linux-sunxi][PATCH " codekipper at gmail.com
2017-01-27 15:48 ` [PATCH 2/3] ARM: dts: sun8i-h3: Add the SPDIF block " codekipper-Re5JQEeQqe8AvxtiuMwx3w
2017-01-27 15:48 ` [linux-sunxi][PATCH " codekipper at gmail.com
2017-01-27 15:48 ` [PATCH 3/3] ARM: dts: sun8i-h3: Add SPDIF to the Beelink X2 codekipper-Re5JQEeQqe8AvxtiuMwx3w
2017-01-27 15:48 ` [linux-sunxi][PATCH " codekipper at gmail.com
2017-01-27 20:10 ` [PATCH 0/3] Enable SPDIF on " Maxime Ripard
2017-01-27 20:10 ` [linux-sunxi][PATCH " Maxime Ripard
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.