From: Lee Jones <lee.jones@linaro.org>
To: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Kukjin Kim <kgene@kernel.org>,
Javier Martinez Canillas <javier@osg.samsung.com>,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
Subject: Re: [PATCH 2/4] phy: exynos5: Remove duplicated defines of PHY register defines
Date: Wed, 8 Feb 2017 11:59:40 +0000 [thread overview]
Message-ID: <20170208115940.anjjpg7ygspca7tf@dell> (raw)
In-Reply-To: <20170127200510.4444-3-krzk@kernel.org>
On Fri, 27 Jan 2017, Krzysztof Kozlowski wrote:
> Phy drivers access PMU region through regmap provided by exynos-pmu
> driver. However there is no need to duplicate defines for PMU
> registers. Instead just use whatever is defined in exynos-regs-pmu.h.
>
> This reduces number of defines and allows removal of one header.
>
> Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> drivers/phy/phy-exynos-dp-video.c | 1 +
> drivers/phy/phy-exynos5-usbdrd.c | 1 +
> include/linux/mfd/syscon/exynos5-pmu.h | 22 ----------------------
Acked-by: Lee Jones <lee.jones@linaro.org>
> include/linux/soc/samsung/exynos-regs-pmu.h | 8 ++++++++
> 4 files changed, 10 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c
> index 34b06154e5d9..d72193188980 100644
> --- a/drivers/phy/phy-exynos-dp-video.c
> +++ b/drivers/phy/phy-exynos-dp-video.c
> @@ -20,6 +20,7 @@
> #include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> +#include <linux/soc/samsung/exynos-regs-pmu.h>
>
> struct exynos_dp_video_phy_drvdata {
> u32 phy_ctrl_offset;
> diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/phy-exynos5-usbdrd.c
> index 07ed608905ac..7c896d0cda18 100644
> --- a/drivers/phy/phy-exynos5-usbdrd.c
> +++ b/drivers/phy/phy-exynos5-usbdrd.c
> @@ -25,6 +25,7 @@
> #include <linux/mfd/syscon/exynos5-pmu.h>
> #include <linux/regmap.h>
> #include <linux/regulator/consumer.h>
> +#include <linux/soc/samsung/exynos-regs-pmu.h>
>
> /* Exynos USB PHY registers */
> #define EXYNOS5_FSEL_9MHZ6 0x0
> diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h
> index 02af8dece914..6108857ffcca 100644
> --- a/include/linux/mfd/syscon/exynos5-pmu.h
> +++ b/include/linux/mfd/syscon/exynos5-pmu.h
> @@ -13,34 +13,12 @@
> #define _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_
>
> /* Exynos5 PMU register definitions */
> -#define EXYNOS5_HDMI_PHY_CONTROL (0x700)
> -#define EXYNOS5_USBDRD_PHY_CONTROL (0x704)
>
> /* Exynos5250 specific register definitions */
> -#define EXYNOS5_USBHOST_PHY_CONTROL (0x708)
> -#define EXYNOS5_EFNAND_PHY_CONTROL (0x70c)
> -#define EXYNOS5_MIPI_PHY0_CONTROL (0x710)
> -#define EXYNOS5_MIPI_PHY1_CONTROL (0x714)
> -#define EXYNOS5_ADC_PHY_CONTROL (0x718)
> -#define EXYNOS5_MTCADC_PHY_CONTROL (0x71c)
> -#define EXYNOS5_DPTX_PHY_CONTROL (0x720)
> -#define EXYNOS5_SATA_PHY_CONTROL (0x724)
>
> /* Exynos5420 specific register definitions */
> -#define EXYNOS5420_USBDRD1_PHY_CONTROL (0x708)
> -#define EXYNOS5420_USBHOST_PHY_CONTROL (0x70c)
> -#define EXYNOS5420_MIPI_PHY0_CONTROL (0x714)
> -#define EXYNOS5420_MIPI_PHY1_CONTROL (0x718)
> -#define EXYNOS5420_MIPI_PHY2_CONTROL (0x71c)
> -#define EXYNOS5420_ADC_PHY_CONTROL (0x720)
> -#define EXYNOS5420_MTCADC_PHY_CONTROL (0x724)
> -#define EXYNOS5420_DPTX_PHY_CONTROL (0x728)
> -
> -/* Exynos5433 specific register definitions */
> -#define EXYNOS5433_USBHOST30_PHY_CONTROL (0x728)
>
> #define EXYNOS5_PHY_ENABLE BIT(0)
> #define EXYNOS5_MIPI_PHY_S_RESETN BIT(1)
> #define EXYNOS5_MIPI_PHY_M_RESETN BIT(2)
> -
> #endif /* _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_ */
> diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h
> index 637ead0efd36..d861e757bef8 100644
> --- a/include/linux/soc/samsung/exynos-regs-pmu.h
> +++ b/include/linux/soc/samsung/exynos-regs-pmu.h
> @@ -349,6 +349,8 @@
>
> #define EXYNOS5_AUTO_WDTRESET_DISABLE 0x0408
> #define EXYNOS5_MASK_WDTRESET_REQUEST 0x040C
> +#define EXYNOS5_USBDRD_PHY_CONTROL 0x0704
> +#define EXYNOS5_DPTX_PHY_CONTROL 0x0720
>
> #define EXYNOS5_USE_RETENTION BIT(4)
> #define EXYNOS5_SYS_WDTRESET (1 << 20)
> @@ -502,6 +504,11 @@
> #define EXYNOS5420_KFC_CORE_RESET(_nr) \
> ((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr))
>
> +#define EXYNOS5420_USBDRD1_PHY_CONTROL 0x0708
> +#define EXYNOS5420_MIPI_PHY0_CONTROL 0x0714
> +#define EXYNOS5420_MIPI_PHY1_CONTROL 0x0718
> +#define EXYNOS5420_MIPI_PHY2_CONTROL 0x071C
> +#define EXYNOS5420_DPTX_PHY_CONTROL 0x0728
> #define EXYNOS5420_ARM_CORE2_SYS_PWR_REG 0x1020
> #define EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG 0x1024
> #define EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG 0x1028
> @@ -639,6 +646,7 @@
> | EXYNOS5420_KFC_USE_STANDBY_WFI3)
>
> /* For EXYNOS5433 */
> +#define EXYNOS5433_USBHOST30_PHY_CONTROL (0x0728)
> #define EXYNOS5433_PAD_RETENTION_AUD_OPTION (0x3028)
> #define EXYNOS5433_PAD_RETENTION_MMC2_OPTION (0x30C8)
> #define EXYNOS5433_PAD_RETENTION_TOP_OPTION (0x3108)
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones@linaro.org>
To: Krzysztof Kozlowski <krzk@kernel.org>
Cc: linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
Kishon Vijay Abraham I <kishon@ti.com>,
Javier Martinez Canillas <javier@osg.samsung.com>,
Kukjin Kim <kgene@kernel.org>,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
linux-arm-kernel@lists.infradead.org,
Marek Szyprowski <m.szyprowski@samsung.com>
Subject: Re: [PATCH 2/4] phy: exynos5: Remove duplicated defines of PHY register defines
Date: Wed, 8 Feb 2017 11:59:40 +0000 [thread overview]
Message-ID: <20170208115940.anjjpg7ygspca7tf@dell> (raw)
In-Reply-To: <20170127200510.4444-3-krzk@kernel.org>
On Fri, 27 Jan 2017, Krzysztof Kozlowski wrote:
> Phy drivers access PMU region through regmap provided by exynos-pmu
> driver. However there is no need to duplicate defines for PMU
> registers. Instead just use whatever is defined in exynos-regs-pmu.h.
>
> This reduces number of defines and allows removal of one header.
>
> Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> drivers/phy/phy-exynos-dp-video.c | 1 +
> drivers/phy/phy-exynos5-usbdrd.c | 1 +
> include/linux/mfd/syscon/exynos5-pmu.h | 22 ----------------------
Acked-by: Lee Jones <lee.jones@linaro.org>
> include/linux/soc/samsung/exynos-regs-pmu.h | 8 ++++++++
> 4 files changed, 10 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c
> index 34b06154e5d9..d72193188980 100644
> --- a/drivers/phy/phy-exynos-dp-video.c
> +++ b/drivers/phy/phy-exynos-dp-video.c
> @@ -20,6 +20,7 @@
> #include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> +#include <linux/soc/samsung/exynos-regs-pmu.h>
>
> struct exynos_dp_video_phy_drvdata {
> u32 phy_ctrl_offset;
> diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/phy-exynos5-usbdrd.c
> index 07ed608905ac..7c896d0cda18 100644
> --- a/drivers/phy/phy-exynos5-usbdrd.c
> +++ b/drivers/phy/phy-exynos5-usbdrd.c
> @@ -25,6 +25,7 @@
> #include <linux/mfd/syscon/exynos5-pmu.h>
> #include <linux/regmap.h>
> #include <linux/regulator/consumer.h>
> +#include <linux/soc/samsung/exynos-regs-pmu.h>
>
> /* Exynos USB PHY registers */
> #define EXYNOS5_FSEL_9MHZ6 0x0
> diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h
> index 02af8dece914..6108857ffcca 100644
> --- a/include/linux/mfd/syscon/exynos5-pmu.h
> +++ b/include/linux/mfd/syscon/exynos5-pmu.h
> @@ -13,34 +13,12 @@
> #define _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_
>
> /* Exynos5 PMU register definitions */
> -#define EXYNOS5_HDMI_PHY_CONTROL (0x700)
> -#define EXYNOS5_USBDRD_PHY_CONTROL (0x704)
>
> /* Exynos5250 specific register definitions */
> -#define EXYNOS5_USBHOST_PHY_CONTROL (0x708)
> -#define EXYNOS5_EFNAND_PHY_CONTROL (0x70c)
> -#define EXYNOS5_MIPI_PHY0_CONTROL (0x710)
> -#define EXYNOS5_MIPI_PHY1_CONTROL (0x714)
> -#define EXYNOS5_ADC_PHY_CONTROL (0x718)
> -#define EXYNOS5_MTCADC_PHY_CONTROL (0x71c)
> -#define EXYNOS5_DPTX_PHY_CONTROL (0x720)
> -#define EXYNOS5_SATA_PHY_CONTROL (0x724)
>
> /* Exynos5420 specific register definitions */
> -#define EXYNOS5420_USBDRD1_PHY_CONTROL (0x708)
> -#define EXYNOS5420_USBHOST_PHY_CONTROL (0x70c)
> -#define EXYNOS5420_MIPI_PHY0_CONTROL (0x714)
> -#define EXYNOS5420_MIPI_PHY1_CONTROL (0x718)
> -#define EXYNOS5420_MIPI_PHY2_CONTROL (0x71c)
> -#define EXYNOS5420_ADC_PHY_CONTROL (0x720)
> -#define EXYNOS5420_MTCADC_PHY_CONTROL (0x724)
> -#define EXYNOS5420_DPTX_PHY_CONTROL (0x728)
> -
> -/* Exynos5433 specific register definitions */
> -#define EXYNOS5433_USBHOST30_PHY_CONTROL (0x728)
>
> #define EXYNOS5_PHY_ENABLE BIT(0)
> #define EXYNOS5_MIPI_PHY_S_RESETN BIT(1)
> #define EXYNOS5_MIPI_PHY_M_RESETN BIT(2)
> -
> #endif /* _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_ */
> diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h
> index 637ead0efd36..d861e757bef8 100644
> --- a/include/linux/soc/samsung/exynos-regs-pmu.h
> +++ b/include/linux/soc/samsung/exynos-regs-pmu.h
> @@ -349,6 +349,8 @@
>
> #define EXYNOS5_AUTO_WDTRESET_DISABLE 0x0408
> #define EXYNOS5_MASK_WDTRESET_REQUEST 0x040C
> +#define EXYNOS5_USBDRD_PHY_CONTROL 0x0704
> +#define EXYNOS5_DPTX_PHY_CONTROL 0x0720
>
> #define EXYNOS5_USE_RETENTION BIT(4)
> #define EXYNOS5_SYS_WDTRESET (1 << 20)
> @@ -502,6 +504,11 @@
> #define EXYNOS5420_KFC_CORE_RESET(_nr) \
> ((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr))
>
> +#define EXYNOS5420_USBDRD1_PHY_CONTROL 0x0708
> +#define EXYNOS5420_MIPI_PHY0_CONTROL 0x0714
> +#define EXYNOS5420_MIPI_PHY1_CONTROL 0x0718
> +#define EXYNOS5420_MIPI_PHY2_CONTROL 0x071C
> +#define EXYNOS5420_DPTX_PHY_CONTROL 0x0728
> #define EXYNOS5420_ARM_CORE2_SYS_PWR_REG 0x1020
> #define EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG 0x1024
> #define EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG 0x1028
> @@ -639,6 +646,7 @@
> | EXYNOS5420_KFC_USE_STANDBY_WFI3)
>
> /* For EXYNOS5433 */
> +#define EXYNOS5433_USBHOST30_PHY_CONTROL (0x0728)
> #define EXYNOS5433_PAD_RETENTION_AUD_OPTION (0x3028)
> #define EXYNOS5433_PAD_RETENTION_MMC2_OPTION (0x30C8)
> #define EXYNOS5433_PAD_RETENTION_TOP_OPTION (0x3108)
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/4] phy: exynos5: Remove duplicated defines of PHY register defines
Date: Wed, 8 Feb 2017 11:59:40 +0000 [thread overview]
Message-ID: <20170208115940.anjjpg7ygspca7tf@dell> (raw)
In-Reply-To: <20170127200510.4444-3-krzk@kernel.org>
On Fri, 27 Jan 2017, Krzysztof Kozlowski wrote:
> Phy drivers access PMU region through regmap provided by exynos-pmu
> driver. However there is no need to duplicate defines for PMU
> registers. Instead just use whatever is defined in exynos-regs-pmu.h.
>
> This reduces number of defines and allows removal of one header.
>
> Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> drivers/phy/phy-exynos-dp-video.c | 1 +
> drivers/phy/phy-exynos5-usbdrd.c | 1 +
> include/linux/mfd/syscon/exynos5-pmu.h | 22 ----------------------
Acked-by: Lee Jones <lee.jones@linaro.org>
> include/linux/soc/samsung/exynos-regs-pmu.h | 8 ++++++++
> 4 files changed, 10 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c
> index 34b06154e5d9..d72193188980 100644
> --- a/drivers/phy/phy-exynos-dp-video.c
> +++ b/drivers/phy/phy-exynos-dp-video.c
> @@ -20,6 +20,7 @@
> #include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> +#include <linux/soc/samsung/exynos-regs-pmu.h>
>
> struct exynos_dp_video_phy_drvdata {
> u32 phy_ctrl_offset;
> diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/phy-exynos5-usbdrd.c
> index 07ed608905ac..7c896d0cda18 100644
> --- a/drivers/phy/phy-exynos5-usbdrd.c
> +++ b/drivers/phy/phy-exynos5-usbdrd.c
> @@ -25,6 +25,7 @@
> #include <linux/mfd/syscon/exynos5-pmu.h>
> #include <linux/regmap.h>
> #include <linux/regulator/consumer.h>
> +#include <linux/soc/samsung/exynos-regs-pmu.h>
>
> /* Exynos USB PHY registers */
> #define EXYNOS5_FSEL_9MHZ6 0x0
> diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h
> index 02af8dece914..6108857ffcca 100644
> --- a/include/linux/mfd/syscon/exynos5-pmu.h
> +++ b/include/linux/mfd/syscon/exynos5-pmu.h
> @@ -13,34 +13,12 @@
> #define _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_
>
> /* Exynos5 PMU register definitions */
> -#define EXYNOS5_HDMI_PHY_CONTROL (0x700)
> -#define EXYNOS5_USBDRD_PHY_CONTROL (0x704)
>
> /* Exynos5250 specific register definitions */
> -#define EXYNOS5_USBHOST_PHY_CONTROL (0x708)
> -#define EXYNOS5_EFNAND_PHY_CONTROL (0x70c)
> -#define EXYNOS5_MIPI_PHY0_CONTROL (0x710)
> -#define EXYNOS5_MIPI_PHY1_CONTROL (0x714)
> -#define EXYNOS5_ADC_PHY_CONTROL (0x718)
> -#define EXYNOS5_MTCADC_PHY_CONTROL (0x71c)
> -#define EXYNOS5_DPTX_PHY_CONTROL (0x720)
> -#define EXYNOS5_SATA_PHY_CONTROL (0x724)
>
> /* Exynos5420 specific register definitions */
> -#define EXYNOS5420_USBDRD1_PHY_CONTROL (0x708)
> -#define EXYNOS5420_USBHOST_PHY_CONTROL (0x70c)
> -#define EXYNOS5420_MIPI_PHY0_CONTROL (0x714)
> -#define EXYNOS5420_MIPI_PHY1_CONTROL (0x718)
> -#define EXYNOS5420_MIPI_PHY2_CONTROL (0x71c)
> -#define EXYNOS5420_ADC_PHY_CONTROL (0x720)
> -#define EXYNOS5420_MTCADC_PHY_CONTROL (0x724)
> -#define EXYNOS5420_DPTX_PHY_CONTROL (0x728)
> -
> -/* Exynos5433 specific register definitions */
> -#define EXYNOS5433_USBHOST30_PHY_CONTROL (0x728)
>
> #define EXYNOS5_PHY_ENABLE BIT(0)
> #define EXYNOS5_MIPI_PHY_S_RESETN BIT(1)
> #define EXYNOS5_MIPI_PHY_M_RESETN BIT(2)
> -
> #endif /* _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_ */
> diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h
> index 637ead0efd36..d861e757bef8 100644
> --- a/include/linux/soc/samsung/exynos-regs-pmu.h
> +++ b/include/linux/soc/samsung/exynos-regs-pmu.h
> @@ -349,6 +349,8 @@
>
> #define EXYNOS5_AUTO_WDTRESET_DISABLE 0x0408
> #define EXYNOS5_MASK_WDTRESET_REQUEST 0x040C
> +#define EXYNOS5_USBDRD_PHY_CONTROL 0x0704
> +#define EXYNOS5_DPTX_PHY_CONTROL 0x0720
>
> #define EXYNOS5_USE_RETENTION BIT(4)
> #define EXYNOS5_SYS_WDTRESET (1 << 20)
> @@ -502,6 +504,11 @@
> #define EXYNOS5420_KFC_CORE_RESET(_nr) \
> ((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr))
>
> +#define EXYNOS5420_USBDRD1_PHY_CONTROL 0x0708
> +#define EXYNOS5420_MIPI_PHY0_CONTROL 0x0714
> +#define EXYNOS5420_MIPI_PHY1_CONTROL 0x0718
> +#define EXYNOS5420_MIPI_PHY2_CONTROL 0x071C
> +#define EXYNOS5420_DPTX_PHY_CONTROL 0x0728
> #define EXYNOS5420_ARM_CORE2_SYS_PWR_REG 0x1020
> #define EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG 0x1024
> #define EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG 0x1028
> @@ -639,6 +646,7 @@
> | EXYNOS5420_KFC_USE_STANDBY_WFI3)
>
> /* For EXYNOS5433 */
> +#define EXYNOS5433_USBHOST30_PHY_CONTROL (0x0728)
> #define EXYNOS5433_PAD_RETENTION_AUD_OPTION (0x3028)
> #define EXYNOS5433_PAD_RETENTION_MMC2_OPTION (0x30C8)
> #define EXYNOS5433_PAD_RETENTION_TOP_OPTION (0x3108)
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2017-02-08 13:11 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-27 20:05 [PATCH 0/4] phy/mfd/soc: exynos: Header cleanup Krzysztof Kozlowski
2017-01-27 20:05 ` Krzysztof Kozlowski
2017-01-27 20:05 ` [PATCH 1/4] phy: exynos4: Remove duplicated defines of PHY register defines Krzysztof Kozlowski
2017-01-27 20:05 ` Krzysztof Kozlowski
2017-02-08 11:58 ` Lee Jones
2017-02-08 11:58 ` Lee Jones
2017-02-08 11:58 ` Lee Jones
2017-01-27 20:05 ` [PATCH 2/4] phy: exynos5: " Krzysztof Kozlowski
2017-01-27 20:05 ` Krzysztof Kozlowski
2017-02-08 11:59 ` Lee Jones [this message]
2017-02-08 11:59 ` Lee Jones
2017-02-08 11:59 ` Lee Jones
2017-01-27 20:05 ` [PATCH 3/4] phy: exynos-mipi-video: Use consistent method to address phy registers Krzysztof Kozlowski
2017-01-27 20:05 ` Krzysztof Kozlowski
2017-01-27 20:05 ` [PATCH 4/4] phy: exynos: Use one define for enable bit Krzysztof Kozlowski
2017-01-27 20:05 ` Krzysztof Kozlowski
2017-02-08 11:59 ` Lee Jones
2017-02-08 11:59 ` Lee Jones
2017-02-08 11:59 ` Lee Jones
2017-01-30 9:13 ` [PATCH 0/4] phy/mfd/soc: exynos: Header cleanup Kishon Vijay Abraham I
2017-01-30 9:13 ` Kishon Vijay Abraham I
2017-01-30 9:13 ` Kishon Vijay Abraham I
2017-02-02 18:38 ` Krzysztof Kozlowski
2017-02-02 18:38 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170208115940.anjjpg7ygspca7tf@dell \
--to=lee.jones@linaro.org \
--cc=javier@osg.samsung.com \
--cc=kgene@kernel.org \
--cc=kishon@ti.com \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=s.nawrocki@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.