All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Frank Schäfer" <fschaefer.oss@googlemail.com>
To: linux-media@vger.kernel.org
Cc: mchehab@kernel.org, arnd@arndb.de,
	"Frank Schäfer" <fschaefer.oss@googlemail.com>
Subject: [PATCH 1/2] em28xx: reduce stack usage in sensor probing functions
Date: Sun, 19 Feb 2017 19:29:17 +0100	[thread overview]
Message-ID: <20170219182918.4978-1-fschaefer.oss@googlemail.com> (raw)

It's no longer necessary to keep the i2c_client in the device struct
unmodified until a sensor is found, so reduce stack usage in
em28xx_probe_sensor_micron() and em28xx_probe_sensor_omnivision() by using
a pointer to the client instead of a local copy.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
---
 drivers/media/usb/em28xx/em28xx-camera.c | 42 +++++++++++++++-----------------
 1 file changed, 20 insertions(+), 22 deletions(-)

diff --git a/drivers/media/usb/em28xx/em28xx-camera.c b/drivers/media/usb/em28xx/em28xx-camera.c
index 89c890ba7dd6..7b4129ab1cf9 100644
--- a/drivers/media/usb/em28xx/em28xx-camera.c
+++ b/drivers/media/usb/em28xx/em28xx-camera.c
@@ -110,44 +110,44 @@ static int em28xx_probe_sensor_micron(struct em28xx *dev)
 	__be16 id_be;
 	u16 id;
 
-	struct i2c_client client = dev->i2c_client[dev->def_i2c_bus];
+	struct i2c_client *client = &dev->i2c_client[dev->def_i2c_bus];
 
 	dev->em28xx_sensor = EM28XX_NOSENSOR;
 	for (i = 0; micron_sensor_addrs[i] != I2C_CLIENT_END; i++) {
-		client.addr = micron_sensor_addrs[i];
+		client->addr = micron_sensor_addrs[i];
 		/* NOTE: i2c_smbus_read_word_data() doesn't work with BE data */
 		/* Read chip ID from register 0x00 */
 		reg = 0x00;
-		ret = i2c_master_send(&client, &reg, 1);
+		ret = i2c_master_send(client, &reg, 1);
 		if (ret < 0) {
 			if (ret != -ENXIO)
 				dev_err(&dev->intf->dev,
 					"couldn't read from i2c device 0x%02x: error %i\n",
-				       client.addr << 1, ret);
+				       client->addr << 1, ret);
 			continue;
 		}
-		ret = i2c_master_recv(&client, (u8 *)&id_be, 2);
+		ret = i2c_master_recv(client, (u8 *)&id_be, 2);
 		if (ret < 0) {
 			dev_err(&dev->intf->dev,
 				"couldn't read from i2c device 0x%02x: error %i\n",
-				client.addr << 1, ret);
+				client->addr << 1, ret);
 			continue;
 		}
 		id = be16_to_cpu(id_be);
 		/* Read chip ID from register 0xff */
 		reg = 0xff;
-		ret = i2c_master_send(&client, &reg, 1);
+		ret = i2c_master_send(client, &reg, 1);
 		if (ret < 0) {
 			dev_err(&dev->intf->dev,
 				"couldn't read from i2c device 0x%02x: error %i\n",
-				client.addr << 1, ret);
+				client->addr << 1, ret);
 			continue;
 		}
-		ret = i2c_master_recv(&client, (u8 *)&id_be, 2);
+		ret = i2c_master_recv(client, (u8 *)&id_be, 2);
 		if (ret < 0) {
 			dev_err(&dev->intf->dev,
 				"couldn't read from i2c device 0x%02x: error %i\n",
-				client.addr << 1, ret);
+				client->addr << 1, ret);
 			continue;
 		}
 		/* Validate chip ID to be sure we have a Micron device */
@@ -197,7 +197,6 @@ static int em28xx_probe_sensor_micron(struct em28xx *dev)
 			dev_info(&dev->intf->dev,
 				 "sensor %s detected\n", name);
 
-		dev->i2c_client[dev->def_i2c_bus].addr = client.addr;
 		return 0;
 	}
 
@@ -213,30 +212,30 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev)
 	char *name;
 	u8 reg;
 	u16 id;
-	struct i2c_client client = dev->i2c_client[dev->def_i2c_bus];
+	struct i2c_client *client = &dev->i2c_client[dev->def_i2c_bus];
 
 	dev->em28xx_sensor = EM28XX_NOSENSOR;
 	/* NOTE: these devices have the register auto incrementation disabled
 	 * by default, so we have to use single byte reads !              */
 	for (i = 0; omnivision_sensor_addrs[i] != I2C_CLIENT_END; i++) {
-		client.addr = omnivision_sensor_addrs[i];
+		client->addr = omnivision_sensor_addrs[i];
 		/* Read manufacturer ID from registers 0x1c-0x1d (BE) */
 		reg = 0x1c;
-		ret = i2c_smbus_read_byte_data(&client, reg);
+		ret = i2c_smbus_read_byte_data(client, reg);
 		if (ret < 0) {
 			if (ret != -ENXIO)
 				dev_err(&dev->intf->dev,
 					"couldn't read from i2c device 0x%02x: error %i\n",
-					client.addr << 1, ret);
+					client->addr << 1, ret);
 			continue;
 		}
 		id = ret << 8;
 		reg = 0x1d;
-		ret = i2c_smbus_read_byte_data(&client, reg);
+		ret = i2c_smbus_read_byte_data(client, reg);
 		if (ret < 0) {
 			dev_err(&dev->intf->dev,
 				"couldn't read from i2c device 0x%02x: error %i\n",
-				client.addr << 1, ret);
+				client->addr << 1, ret);
 			continue;
 		}
 		id += ret;
@@ -245,20 +244,20 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev)
 			continue;
 		/* Read product ID from registers 0x0a-0x0b (BE) */
 		reg = 0x0a;
-		ret = i2c_smbus_read_byte_data(&client, reg);
+		ret = i2c_smbus_read_byte_data(client, reg);
 		if (ret < 0) {
 			dev_err(&dev->intf->dev,
 				"couldn't read from i2c device 0x%02x: error %i\n",
-				client.addr << 1, ret);
+				client->addr << 1, ret);
 			continue;
 		}
 		id = ret << 8;
 		reg = 0x0b;
-		ret = i2c_smbus_read_byte_data(&client, reg);
+		ret = i2c_smbus_read_byte_data(client, reg);
 		if (ret < 0) {
 			dev_err(&dev->intf->dev,
 				"couldn't read from i2c device 0x%02x: error %i\n",
-				client.addr << 1, ret);
+				client->addr << 1, ret);
 			continue;
 		}
 		id += ret;
@@ -309,7 +308,6 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev)
 			dev_info(&dev->intf->dev,
 				 "sensor %s detected\n", name);
 
-		dev->i2c_client[dev->def_i2c_bus].addr = client.addr;
 		return 0;
 	}
 
-- 
2.11.0

             reply	other threads:[~2017-02-19 18:29 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-19 18:29 Frank Schäfer [this message]
2017-02-19 18:29 ` [PATCH 2/2] em28xx: simplify ID-reading from Micron sensors Frank Schäfer
     [not found]   ` <20170322114606.1feeb960@vento.lan>
     [not found]     ` <5107179d-74fd-3b98-5fc6-ba7051927ae2@googlemail.com>
     [not found]       ` <20170323095612.72216892@vento.lan>
2017-03-23 18:03         ` Frank Schäfer
2017-03-24 19:16           ` Mauro Carvalho Chehab
2017-03-26 14:24             ` Frank Schäfer
2017-04-10 18:06               ` Frank Schäfer
2017-04-15 13:03                 ` Mauro Carvalho Chehab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170219182918.4978-1-fschaefer.oss@googlemail.com \
    --to=fschaefer.oss@googlemail.com \
    --cc=arnd@arndb.de \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.