From: Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
To: khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
will.deacon-5wv7dgnIgG8@public.gmane.org,
catalin.marinas-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
jbrunet-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
andrew-g2DYL2Zd6BY@public.gmane.org,
Martin Blumenstingl
<martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
Subject: [PATCH v5 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx
Date: Sun, 19 Feb 2017 22:41:49 +0100 [thread overview]
Message-ID: <20170219214149.30418-10-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20170219214149.30418-1-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
The ethmac node has to be configured for each board due to different
pinctrl nodes for RGMII/RMII. Thus the phy-mode should be specified at
the same place (= in the board .dts), making it easier to read the board
.dts file (because the phy-mode is stated explicitly, without requiring
developers to read all "parent" .dtsi as well).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
---
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 5d995f7724af..d544b8f2ffbf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -410,7 +410,6 @@
0x0 0xc8834540 0x0 0x4>;
interrupts = <0 8 1>;
interrupt-names = "macirq";
- phy-mode = "rgmii";
status = "disabled";
};
--
2.11.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: martin.blumenstingl@googlemail.com (Martin Blumenstingl)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx
Date: Sun, 19 Feb 2017 22:41:49 +0100 [thread overview]
Message-ID: <20170219214149.30418-10-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20170219214149.30418-1-martin.blumenstingl@googlemail.com>
The ethmac node has to be configured for each board due to different
pinctrl nodes for RGMII/RMII. Thus the phy-mode should be specified at
the same place (= in the board .dts), making it easier to read the board
.dts file (because the phy-mode is stated explicitly, without requiring
developers to read all "parent" .dtsi as well).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 5d995f7724af..d544b8f2ffbf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -410,7 +410,6 @@
0x0 0xc8834540 0x0 0x4>;
interrupts = <0 8 1>;
interrupt-names = "macirq";
- phy-mode = "rgmii";
status = "disabled";
};
--
2.11.1
WARNING: multiple messages have this Message-ID (diff)
From: martin.blumenstingl@googlemail.com (Martin Blumenstingl)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v5 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx
Date: Sun, 19 Feb 2017 22:41:49 +0100 [thread overview]
Message-ID: <20170219214149.30418-10-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20170219214149.30418-1-martin.blumenstingl@googlemail.com>
The ethmac node has to be configured for each board due to different
pinctrl nodes for RGMII/RMII. Thus the phy-mode should be specified at
the same place (= in the board .dts), making it easier to read the board
.dts file (because the phy-mode is stated explicitly, without requiring
developers to read all "parent" .dtsi as well).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 5d995f7724af..d544b8f2ffbf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -410,7 +410,6 @@
0x0 0xc8834540 0x0 0x4>;
interrupts = <0 8 1>;
interrupt-names = "macirq";
- phy-mode = "rgmii";
status = "disabled";
};
--
2.11.1
next prev parent reply other threads:[~2017-02-19 21:41 UTC|newest]
Thread overview: 234+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-02 23:47 [PATCH 0/5] meson-gx: reset RGMII PHYs and configure TX delay Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 1/5] ARM64: dts: meson-gx: move the MDIO node to meson-gx Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 2/5] ARM64: dts: meson-gxbb-odroidc2: add reset for the ethernet PHY Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 3/5] ARM64: dts: meson-gxbb-p20x: " Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
[not found] ` <20161202234739.22929-4-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2017-01-17 19:22 ` Jerome Brunet
2017-01-17 19:22 ` Jerome Brunet
2017-01-17 19:22 ` Jerome Brunet
2017-01-17 21:26 ` Martin Blumenstingl
2017-01-17 21:26 ` Martin Blumenstingl
2017-01-17 21:26 ` Martin Blumenstingl
[not found] ` <CAFBinCBfJ4b1a1Bqn7kJHyj79i8UJnjJh00u3NvARzJPuUmrNA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-01-18 10:36 ` Jerome Brunet
2017-01-18 10:36 ` Jerome Brunet
2017-01-18 10:36 ` Jerome Brunet
[not found] ` <1484735769.26620.69.camel-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2017-01-18 14:26 ` Martin Blumenstingl
2017-01-18 14:26 ` Martin Blumenstingl
2017-01-18 14:26 ` Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 4/5] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 5/5] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
[not found] ` <20161202234739.22929-1-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2016-12-17 20:36 ` [PATCH 0/5] meson-gx: reset RGMII PHYs and configure TX delay Martin Blumenstingl
2016-12-17 20:36 ` Martin Blumenstingl
2016-12-17 20:36 ` Martin Blumenstingl
[not found] ` <CAFBinCDpBew7wreNPn6=J3jKsw_Ok=Ed9_+Gxsefb661RvUdrA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-01-09 22:52 ` Kevin Hilman
2017-01-09 22:52 ` Kevin Hilman
2017-01-09 22:52 ` Kevin Hilman
2017-01-17 19:23 ` Jerome Brunet
2017-01-17 19:23 ` Jerome Brunet
2017-01-17 19:23 ` Jerome Brunet
2017-01-17 21:09 ` Martin Blumenstingl
2017-01-17 21:09 ` Martin Blumenstingl
2017-01-17 21:09 ` Martin Blumenstingl
[not found] ` <CAFBinCDvtufXUxe+cRCzOKFtbOqS-xEr0Vp=_0S4Pn+sTPHOmg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-01-17 22:26 ` Jerome Brunet
2017-01-17 22:26 ` Jerome Brunet
2017-01-17 22:26 ` Jerome Brunet
[not found] ` <1484691981.26620.55.camel-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2017-01-17 22:44 ` Martin Blumenstingl
2017-01-17 22:44 ` Martin Blumenstingl
2017-01-17 22:44 ` Martin Blumenstingl
2017-01-18 19:28 ` Kevin Hilman
2017-01-18 19:28 ` Kevin Hilman
2017-01-18 19:28 ` Kevin Hilman
2017-01-18 19:40 ` Martin Blumenstingl
2017-01-18 19:40 ` Martin Blumenstingl
2017-01-18 19:40 ` Martin Blumenstingl
2017-01-19 9:47 ` Jerome Brunet
2017-01-19 9:47 ` Jerome Brunet
2017-01-19 9:47 ` Jerome Brunet
2017-01-20 13:26 ` [PATCH v2 0/9] " Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 3/9] ARM64: dts: meson-gxbb-vega-s95: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 7/9] ARM64: dts: meson-gxbb-p20x: remove the ethernet node Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
[not found] ` <20170120132650.9784-1-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2017-01-20 13:26 ` [PATCH v2 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 2/9] ARM64: dts: meson-gxbb-p201: " Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
[not found] ` <20170120132650.9784-3-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2017-01-20 13:31 ` Neil Armstrong
2017-01-20 13:31 ` Neil Armstrong
2017-01-20 13:31 ` Neil Armstrong
2017-01-20 13:33 ` Martin Blumenstingl
2017-01-20 13:33 ` Martin Blumenstingl
2017-01-20 13:33 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 0/9] meson-gx: reset RGMII PHYs and configure TX delay Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:27 ` Jerome Brunet
2017-01-20 15:27 ` Jerome Brunet
2017-01-20 15:27 ` Jerome Brunet
[not found] ` <20170120152232.13943-1-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2017-01-20 15:22 ` [PATCH v3 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
[not found] ` <20170120152232.13943-2-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 2/9] ARM64: dts: meson-gxbb-p200: " Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
[not found] ` <20170120152232.13943-3-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2017-01-20 16:18 ` Andrew Lunn
2017-01-20 16:18 ` Andrew Lunn
2017-01-20 16:18 ` Andrew Lunn
2017-01-20 16:21 ` Andrew Lunn
2017-01-20 16:21 ` Andrew Lunn
2017-01-20 16:21 ` Andrew Lunn
[not found] ` <20170120162138.GE25907-g2DYL2Zd6BY@public.gmane.org>
2017-01-20 17:07 ` Martin Blumenstingl
2017-01-20 17:07 ` Martin Blumenstingl
2017-01-20 17:07 ` Martin Blumenstingl
[not found] ` <CAFBinCA47Nng_jjxKrWrV_YBHr0bg+7xPaJrVswt_WnZ6wtyjA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-01-20 17:46 ` Andrew Lunn
2017-01-20 17:46 ` Andrew Lunn
2017-01-20 17:46 ` Andrew Lunn
[not found] ` <20170120174658.GG25907-g2DYL2Zd6BY@public.gmane.org>
2017-01-22 16:48 ` Martin Blumenstingl
2017-01-22 16:48 ` Martin Blumenstingl
2017-01-22 16:48 ` Martin Blumenstingl
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 16:34 ` Neil Armstrong
2017-01-20 16:34 ` Neil Armstrong
2017-01-20 16:34 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:32 ` [PATCH v3 0/9] meson-gx: reset RGMII PHYs and configure TX delay Martin Blumenstingl
2017-01-20 15:32 ` Martin Blumenstingl
2017-01-20 15:32 ` Martin Blumenstingl
2017-01-20 19:46 ` Kevin Hilman
2017-01-20 19:46 ` Kevin Hilman
2017-01-20 19:46 ` Kevin Hilman
2017-01-22 18:10 ` [PATCH v4 " Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
[not found] ` <20170122181028.5014-1-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2017-01-22 18:10 ` [PATCH v4 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 2/9] ARM64: dts: meson-gxbb-p200: " Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-23 18:55 ` [PATCH v4 0/9] meson-gx: reset RGMII PHYs and configure TX delay Kevin Hilman
2017-01-23 18:55 ` Kevin Hilman
2017-01-23 18:55 ` Kevin Hilman
[not found] ` <m24m0p38sk.fsf-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2017-01-23 19:02 ` Martin Blumenstingl
2017-01-23 19:02 ` Martin Blumenstingl
2017-01-23 19:02 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 " Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
[not found] ` <20170219214149.30418-1-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2017-02-19 21:41 ` [PATCH v5 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 2/9] ARM64: dts: meson-gxbb-p200: " Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl [this message]
2017-02-19 21:41 ` [PATCH v5 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-20 9:08 ` [PATCH v5 0/9] meson-gx: reset RGMII PHYs and configure TX delay Jerome Brunet
2017-02-20 9:08 ` Jerome Brunet
2017-02-20 9:08 ` Jerome Brunet
2017-03-02 17:02 ` Kevin Hilman
2017-03-02 17:02 ` Kevin Hilman
2017-03-02 17:02 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170219214149.30418-10-martin.blumenstingl@googlemail.com \
--to=martin.blumenstingl-gm/ye1e23mwn+bqq9rbeug@public.gmane.org \
--cc=andrew-g2DYL2Zd6BY@public.gmane.org \
--cc=carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=jbrunet-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.