* [PATCH 0/1] meson-gxl: improve support for the P212 board
@ 2017-02-19 22:41 ` Martin Blumenstingl
0 siblings, 0 replies; 21+ messages in thread
From: Martin Blumenstingl @ 2017-02-19 22:41 UTC (permalink / raw)
To: linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
khilman-rdvid1DuHRBWk0Htik3J/w, carlo-KA+7E9HrN00dnm+yROfE0A,
narmstrong-rdvid1DuHRBWk0Htik3J/w
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, will.deacon-5wv7dgnIgG8,
catalin.marinas-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, jbrunet-rdvid1DuHRBWk0Htik3J/w,
Martin Blumenstingl
The P212 board is a reference design and re-used by other boards (similar
to the meson-gxbb-p20x.dtsi which is inherited by the Wetek boards).
Until now only very basic functionality was supported, but most of the
interesting things (wifi, SD, eMMC, IR, etc.) are not enabled yet - which
changes with this patch.
I have tested this with a Khadas VIM board (patch for this will follow)
as I don't have a P212 board itself. Thus it would be nice if someone
could test it on an actual P212 board.
Please also specifically review the copyright statements in
meson-gxl-s905x-p212.dtsi - I want to make sure I didn't mess anything
up there.
Martin Blumenstingl (1):
ARM64: dts: meson-gxl: improve support for the P212 reference design
.../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +-
.../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 214 +++++++++++++++++++++
2 files changed, 226 insertions(+), 9 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
--
2.11.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 0/1] meson-gxl: improve support for the P212 board
@ 2017-02-19 22:41 ` Martin Blumenstingl
0 siblings, 0 replies; 21+ messages in thread
From: Martin Blumenstingl @ 2017-02-19 22:41 UTC (permalink / raw)
To: linux-arm-kernel
The P212 board is a reference design and re-used by other boards (similar
to the meson-gxbb-p20x.dtsi which is inherited by the Wetek boards).
Until now only very basic functionality was supported, but most of the
interesting things (wifi, SD, eMMC, IR, etc.) are not enabled yet - which
changes with this patch.
I have tested this with a Khadas VIM board (patch for this will follow)
as I don't have a P212 board itself. Thus it would be nice if someone
could test it on an actual P212 board.
Please also specifically review the copyright statements in
meson-gxl-s905x-p212.dtsi - I want to make sure I didn't mess anything
up there.
Martin Blumenstingl (1):
ARM64: dts: meson-gxl: improve support for the P212 reference design
.../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +-
.../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 214 +++++++++++++++++++++
2 files changed, 226 insertions(+), 9 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
--
2.11.1
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 0/1] meson-gxl: improve support for the P212 board
@ 2017-02-19 22:41 ` Martin Blumenstingl
0 siblings, 0 replies; 21+ messages in thread
From: Martin Blumenstingl @ 2017-02-19 22:41 UTC (permalink / raw)
To: linus-amlogic
The P212 board is a reference design and re-used by other boards (similar
to the meson-gxbb-p20x.dtsi which is inherited by the Wetek boards).
Until now only very basic functionality was supported, but most of the
interesting things (wifi, SD, eMMC, IR, etc.) are not enabled yet - which
changes with this patch.
I have tested this with a Khadas VIM board (patch for this will follow)
as I don't have a P212 board itself. Thus it would be nice if someone
could test it on an actual P212 board.
Please also specifically review the copyright statements in
meson-gxl-s905x-p212.dtsi - I want to make sure I didn't mess anything
up there.
Martin Blumenstingl (1):
ARM64: dts: meson-gxl: improve support for the P212 reference design
.../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +-
.../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 214 +++++++++++++++++++++
2 files changed, 226 insertions(+), 9 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
--
2.11.1
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design
2017-02-19 22:41 ` Martin Blumenstingl
(?)
@ 2017-02-19 22:41 ` Martin Blumenstingl
-1 siblings, 0 replies; 21+ messages in thread
From: Martin Blumenstingl @ 2017-02-19 22:41 UTC (permalink / raw)
To: linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
khilman-rdvid1DuHRBWk0Htik3J/w, carlo-KA+7E9HrN00dnm+yROfE0A,
narmstrong-rdvid1DuHRBWk0Htik3J/w
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, will.deacon-5wv7dgnIgG8,
catalin.marinas-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, jbrunet-rdvid1DuHRBWk0Htik3J/w,
Martin Blumenstingl
The Amlogic P212 reference design is used by other devices as well, such
as (for example) the Khadas VIM boards. Thus this patch adds and moves
all common entries from meson-gxl-s905x-p212.dts to a new, separate
meson-gxl-s905x-p212.dtsi (which can be re-used on boards such as the
Khadas VIM).
Support for all boards based on the P212 reference design includes:
- enabling IR support
- enabling the SAR ADC (SARADC_CH1 is connected to a resistor which
indicates the hardware revision, a similar design is found on the
Khadas VIM boards)
- all MMC controllers (which means that SDIO wifi, the SD card and the
eMMC are now supported)
- pwm_ef as dependency for the SDIO wifi module
- uart_A which is connected to the bluetooth module (the bluetooth
module itself is not enabled yet due to missing devicetree bindings
for the Broadcom serial bluetooth devices)
- uart_AO is moved to the .dtsi (as all known devices use it as their
boot-console)
Specific to the P212 board:
- this also enables the CVBS connector (which is not available on the
Khadas VIM boards for example)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
---
.../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +-
.../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 214 +++++++++++++++++++++
2 files changed, 226 insertions(+), 9 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
index 9639f012b02b..db31e093f40e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
@@ -43,23 +43,26 @@
/dts-v1/;
-#include "meson-gxl-s905x.dtsi"
+#include "meson-gxl-s905x-p212.dtsi"
/ {
compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
model = "Amlogic Meson GXL (S905X) P212 Development Board";
- aliases {
- serial0 = &uart_AO;
- };
+ cvbs-connector {
+ compatible = "composite-video-connector";
- chosen {
- stdout-path = "serial0:115200n8";
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
};
+};
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
new file mode 100644
index 000000000000..fb0e7c999cb6
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -0,0 +1,214 @@
+/*
+ * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>.
+ * Based on meson-gx-p23x-q20x.dtsi:
+ * - Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>
+ * - Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* Common DTSI for devices which are based on the P212 reference board. */
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart_AO;
+ serial1 = &uart_A;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ vddio_boot: regulator-vddio_boot {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vddio_ao18: regulator-vddio_ao18 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+};
+
+ðmac {
+ status = "okay";
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+ status = "okay";
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
--
2.11.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design
@ 2017-02-19 22:41 ` Martin Blumenstingl
0 siblings, 0 replies; 21+ messages in thread
From: Martin Blumenstingl @ 2017-02-19 22:41 UTC (permalink / raw)
To: linux-arm-kernel
The Amlogic P212 reference design is used by other devices as well, such
as (for example) the Khadas VIM boards. Thus this patch adds and moves
all common entries from meson-gxl-s905x-p212.dts to a new, separate
meson-gxl-s905x-p212.dtsi (which can be re-used on boards such as the
Khadas VIM).
Support for all boards based on the P212 reference design includes:
- enabling IR support
- enabling the SAR ADC (SARADC_CH1 is connected to a resistor which
indicates the hardware revision, a similar design is found on the
Khadas VIM boards)
- all MMC controllers (which means that SDIO wifi, the SD card and the
eMMC are now supported)
- pwm_ef as dependency for the SDIO wifi module
- uart_A which is connected to the bluetooth module (the bluetooth
module itself is not enabled yet due to missing devicetree bindings
for the Broadcom serial bluetooth devices)
- uart_AO is moved to the .dtsi (as all known devices use it as their
boot-console)
Specific to the P212 board:
- this also enables the CVBS connector (which is not available on the
Khadas VIM boards for example)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
.../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +-
.../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 214 +++++++++++++++++++++
2 files changed, 226 insertions(+), 9 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
index 9639f012b02b..db31e093f40e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
@@ -43,23 +43,26 @@
/dts-v1/;
-#include "meson-gxl-s905x.dtsi"
+#include "meson-gxl-s905x-p212.dtsi"
/ {
compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
model = "Amlogic Meson GXL (S905X) P212 Development Board";
- aliases {
- serial0 = &uart_AO;
- };
+ cvbs-connector {
+ compatible = "composite-video-connector";
- chosen {
- stdout-path = "serial0:115200n8";
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
};
+};
- memory at 0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
new file mode 100644
index 000000000000..fb0e7c999cb6
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -0,0 +1,214 @@
+/*
+ * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Based on meson-gx-p23x-q20x.dtsi:
+ * - Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ * - Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* Common DTSI for devices which are based on the P212 reference board. */
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart_AO;
+ serial1 = &uart_A;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ vddio_boot: regulator-vddio_boot {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vddio_ao18: regulator-vddio_ao18 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+};
+
+ðmac {
+ status = "okay";
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+ status = "okay";
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+
+ brcmf: bcrmf at 1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
--
2.11.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design
@ 2017-02-19 22:41 ` Martin Blumenstingl
0 siblings, 0 replies; 21+ messages in thread
From: Martin Blumenstingl @ 2017-02-19 22:41 UTC (permalink / raw)
To: linus-amlogic
The Amlogic P212 reference design is used by other devices as well, such
as (for example) the Khadas VIM boards. Thus this patch adds and moves
all common entries from meson-gxl-s905x-p212.dts to a new, separate
meson-gxl-s905x-p212.dtsi (which can be re-used on boards such as the
Khadas VIM).
Support for all boards based on the P212 reference design includes:
- enabling IR support
- enabling the SAR ADC (SARADC_CH1 is connected to a resistor which
indicates the hardware revision, a similar design is found on the
Khadas VIM boards)
- all MMC controllers (which means that SDIO wifi, the SD card and the
eMMC are now supported)
- pwm_ef as dependency for the SDIO wifi module
- uart_A which is connected to the bluetooth module (the bluetooth
module itself is not enabled yet due to missing devicetree bindings
for the Broadcom serial bluetooth devices)
- uart_AO is moved to the .dtsi (as all known devices use it as their
boot-console)
Specific to the P212 board:
- this also enables the CVBS connector (which is not available on the
Khadas VIM boards for example)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
.../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +-
.../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 214 +++++++++++++++++++++
2 files changed, 226 insertions(+), 9 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
index 9639f012b02b..db31e093f40e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
@@ -43,23 +43,26 @@
/dts-v1/;
-#include "meson-gxl-s905x.dtsi"
+#include "meson-gxl-s905x-p212.dtsi"
/ {
compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
model = "Amlogic Meson GXL (S905X) P212 Development Board";
- aliases {
- serial0 = &uart_AO;
- };
+ cvbs-connector {
+ compatible = "composite-video-connector";
- chosen {
- stdout-path = "serial0:115200n8";
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
};
+};
- memory at 0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
new file mode 100644
index 000000000000..fb0e7c999cb6
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -0,0 +1,214 @@
+/*
+ * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Based on meson-gx-p23x-q20x.dtsi:
+ * - Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ * - Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* Common DTSI for devices which are based on the P212 reference board. */
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart_AO;
+ serial1 = &uart_A;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ vddio_boot: regulator-vddio_boot {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vddio_ao18: regulator-vddio_ao18 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+};
+
+ðmac {
+ status = "okay";
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+ status = "okay";
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+
+ brcmf: bcrmf at 1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
--
2.11.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design
2017-02-19 22:41 ` Martin Blumenstingl
(?)
@ 2017-02-28 13:50 ` Neil Armstrong
-1 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2017-02-28 13:50 UTC (permalink / raw)
To: Martin Blumenstingl,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
khilman-rdvid1DuHRBWk0Htik3J/w, carlo-KA+7E9HrN00dnm+yROfE0A
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, will.deacon-5wv7dgnIgG8,
catalin.marinas-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, jbrunet-rdvid1DuHRBWk0Htik3J/w
On 02/19/2017 11:41 PM, Martin Blumenstingl wrote:
> The Amlogic P212 reference design is used by other devices as well, such
> as (for example) the Khadas VIM boards. Thus this patch adds and moves
> all common entries from meson-gxl-s905x-p212.dts to a new, separate
> meson-gxl-s905x-p212.dtsi (which can be re-used on boards such as the
> Khadas VIM).
> Support for all boards based on the P212 reference design includes:
> - enabling IR support
> - enabling the SAR ADC (SARADC_CH1 is connected to a resistor which
> indicates the hardware revision, a similar design is found on the
> Khadas VIM boards)
> - all MMC controllers (which means that SDIO wifi, the SD card and the
> eMMC are now supported)
> - pwm_ef as dependency for the SDIO wifi module
> - uart_A which is connected to the bluetooth module (the bluetooth
> module itself is not enabled yet due to missing devicetree bindings
> for the Broadcom serial bluetooth devices)
> - uart_AO is moved to the .dtsi (as all known devices use it as their
> boot-console)
>
> Specific to the P212 board:
> - this also enables the CVBS connector (which is not available on the
> Khadas VIM boards for example)
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
> ---
> .../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +-
> .../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 214 +++++++++++++++++++++
> 2 files changed, 226 insertions(+), 9 deletions(-)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> index 9639f012b02b..db31e093f40e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> @@ -43,23 +43,26 @@
>
> /dts-v1/;
>
> -#include "meson-gxl-s905x.dtsi"
> +#include "meson-gxl-s905x-p212.dtsi"
>
> / {
> compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
> model = "Amlogic Meson GXL (S905X) P212 Development Board";
>
> - aliases {
> - serial0 = &uart_AO;
> - };
> + cvbs-connector {
> + compatible = "composite-video-connector";
>
> - chosen {
> - stdout-path = "serial0:115200n8";
> + port {
> + cvbs_connector_in: endpoint {
> + remote-endpoint = <&cvbs_vdac_out>;
> + };
> + };
> };
> +};
>
> - memory@0 {
> - device_type = "memory";
> - reg = <0x0 0x0 0x0 0x80000000>;
> +&cvbs_vdac_port {
> + cvbs_vdac_out: endpoint {
> + remote-endpoint = <&cvbs_connector_in>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> new file mode 100644
> index 000000000000..fb0e7c999cb6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> @@ -0,0 +1,214 @@
> +/*
> + * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>.
> + * Based on meson-gx-p23x-q20x.dtsi:
> + * - Copyright (c) 2016 Endless Computers, Inc.
> + * Author: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>
> + * - Copyright (c) 2016 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/* Common DTSI for devices which are based on the P212 reference board. */
> +
> +#include "meson-gxl-s905x.dtsi"
> +
> +/ {
> + aliases {
> + serial0 = &uart_AO;
> + serial1 = &uart_A;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x80000000>;
> + };
> +
> + vddio_boot: regulator-vddio_boot {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDIO_BOOT";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vddao_3v3: regulator-vddao_3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDAO_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + vddio_ao18: regulator-vddio_ao18 {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDIO_AO18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vcc_3v3: regulator-vcc_3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VCC_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + emmc_pwrseq: emmc-pwrseq {
> + compatible = "mmc-pwrseq-emmc";
> + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
> + };
> +
> + wifi32k: wifi32k {
> + compatible = "pwm-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
> + };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
> + clocks = <&wifi32k>;
> + clock-names = "ext_clock";
> + };
> +};
> +
> +ðmac {
> + status = "okay";
> +};
> +
> +&ir {
> + status = "okay";
> + pinctrl-0 = <&remote_input_ao_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&saradc {
> + status = "okay";
> + vref-supply = <&vddio_ao18>;
> +};
> +
> +/* Wireless SDIO Module */
> +&sd_emmc_a {
> + status = "okay";
> + pinctrl-0 = <&sdio_pins>;
> + pinctrl-names = "default";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + bus-width = <4>;
> + cap-sd-highspeed;
> + max-frequency = <100000000>;
> +
> + non-removable;
> + disable-wp;
> +
> + mmc-pwrseq = <&sdio_pwrseq>;
> +
> + vmmc-supply = <&vddao_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +
> + brcmf: bcrmf@1 {
> + reg = <1>;
> + compatible = "brcm,bcm4329-fmac";
> + };
> +};
> +
> +/* SD card */
> +&sd_emmc_b {
> + status = "okay";
> + pinctrl-0 = <&sdcard_pins>;
> + pinctrl-names = "default";
> +
> + bus-width = <4>;
> + cap-sd-highspeed;
> + max-frequency = <100000000>;
> + disable-wp;
> +
> + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
> + cd-inverted;
> +
> + vmmc-supply = <&vddao_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +};
> +
> +/* eMMC */
> +&sd_emmc_c {
> + status = "okay";
> + pinctrl-0 = <&emmc_pins>;
> + pinctrl-names = "default";
> +
> + bus-width = <8>;
> + cap-sd-highspeed;
> + cap-mmc-highspeed;
> + max-frequency = <200000000>;
> + non-removable;
> + disable-wp;
> + mmc-ddr-1_8v;
> + mmc-hs200-1_8v;
> +
> + mmc-pwrseq = <&emmc_pwrseq>;
> + vmmc-supply = <&vcc_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +};
> +
> +&pwm_ef {
> + status = "okay";
> + pinctrl-0 = <&pwm_e_pins>;
> + pinctrl-names = "default";
> + clocks = <&clkc CLKID_FCLK_DIV4>;
> + clock-names = "clkin0";
> +};
> +
> +/* This is connected to the Bluetooth module: */
> +&uart_A {
> + status = "okay";
> + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> + pinctrl-names = "default";
> + uart-has-rtscts;
> +};
> +
> +&uart_AO {
> + status = "okay";
> + pinctrl-0 = <&uart_ao_a_pins>;
> + pinctrl-names = "default";
> +};
>
Great Job !
It works perfectly on an P212 board.
Tested-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Thanks,
Neil
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design
@ 2017-02-28 13:50 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2017-02-28 13:50 UTC (permalink / raw)
To: linux-arm-kernel
On 02/19/2017 11:41 PM, Martin Blumenstingl wrote:
> The Amlogic P212 reference design is used by other devices as well, such
> as (for example) the Khadas VIM boards. Thus this patch adds and moves
> all common entries from meson-gxl-s905x-p212.dts to a new, separate
> meson-gxl-s905x-p212.dtsi (which can be re-used on boards such as the
> Khadas VIM).
> Support for all boards based on the P212 reference design includes:
> - enabling IR support
> - enabling the SAR ADC (SARADC_CH1 is connected to a resistor which
> indicates the hardware revision, a similar design is found on the
> Khadas VIM boards)
> - all MMC controllers (which means that SDIO wifi, the SD card and the
> eMMC are now supported)
> - pwm_ef as dependency for the SDIO wifi module
> - uart_A which is connected to the bluetooth module (the bluetooth
> module itself is not enabled yet due to missing devicetree bindings
> for the Broadcom serial bluetooth devices)
> - uart_AO is moved to the .dtsi (as all known devices use it as their
> boot-console)
>
> Specific to the P212 board:
> - this also enables the CVBS connector (which is not available on the
> Khadas VIM boards for example)
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> .../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +-
> .../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 214 +++++++++++++++++++++
> 2 files changed, 226 insertions(+), 9 deletions(-)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> index 9639f012b02b..db31e093f40e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> @@ -43,23 +43,26 @@
>
> /dts-v1/;
>
> -#include "meson-gxl-s905x.dtsi"
> +#include "meson-gxl-s905x-p212.dtsi"
>
> / {
> compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
> model = "Amlogic Meson GXL (S905X) P212 Development Board";
>
> - aliases {
> - serial0 = &uart_AO;
> - };
> + cvbs-connector {
> + compatible = "composite-video-connector";
>
> - chosen {
> - stdout-path = "serial0:115200n8";
> + port {
> + cvbs_connector_in: endpoint {
> + remote-endpoint = <&cvbs_vdac_out>;
> + };
> + };
> };
> +};
>
> - memory at 0 {
> - device_type = "memory";
> - reg = <0x0 0x0 0x0 0x80000000>;
> +&cvbs_vdac_port {
> + cvbs_vdac_out: endpoint {
> + remote-endpoint = <&cvbs_connector_in>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> new file mode 100644
> index 000000000000..fb0e7c999cb6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> @@ -0,0 +1,214 @@
> +/*
> + * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
> + * Based on meson-gx-p23x-q20x.dtsi:
> + * - Copyright (c) 2016 Endless Computers, Inc.
> + * Author: Carlo Caione <carlo@endlessm.com>
> + * - Copyright (c) 2016 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/* Common DTSI for devices which are based on the P212 reference board. */
> +
> +#include "meson-gxl-s905x.dtsi"
> +
> +/ {
> + aliases {
> + serial0 = &uart_AO;
> + serial1 = &uart_A;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory at 0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x80000000>;
> + };
> +
> + vddio_boot: regulator-vddio_boot {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDIO_BOOT";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vddao_3v3: regulator-vddao_3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDAO_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + vddio_ao18: regulator-vddio_ao18 {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDIO_AO18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vcc_3v3: regulator-vcc_3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VCC_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + emmc_pwrseq: emmc-pwrseq {
> + compatible = "mmc-pwrseq-emmc";
> + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
> + };
> +
> + wifi32k: wifi32k {
> + compatible = "pwm-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
> + };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
> + clocks = <&wifi32k>;
> + clock-names = "ext_clock";
> + };
> +};
> +
> +ðmac {
> + status = "okay";
> +};
> +
> +&ir {
> + status = "okay";
> + pinctrl-0 = <&remote_input_ao_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&saradc {
> + status = "okay";
> + vref-supply = <&vddio_ao18>;
> +};
> +
> +/* Wireless SDIO Module */
> +&sd_emmc_a {
> + status = "okay";
> + pinctrl-0 = <&sdio_pins>;
> + pinctrl-names = "default";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + bus-width = <4>;
> + cap-sd-highspeed;
> + max-frequency = <100000000>;
> +
> + non-removable;
> + disable-wp;
> +
> + mmc-pwrseq = <&sdio_pwrseq>;
> +
> + vmmc-supply = <&vddao_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +
> + brcmf: bcrmf at 1 {
> + reg = <1>;
> + compatible = "brcm,bcm4329-fmac";
> + };
> +};
> +
> +/* SD card */
> +&sd_emmc_b {
> + status = "okay";
> + pinctrl-0 = <&sdcard_pins>;
> + pinctrl-names = "default";
> +
> + bus-width = <4>;
> + cap-sd-highspeed;
> + max-frequency = <100000000>;
> + disable-wp;
> +
> + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
> + cd-inverted;
> +
> + vmmc-supply = <&vddao_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +};
> +
> +/* eMMC */
> +&sd_emmc_c {
> + status = "okay";
> + pinctrl-0 = <&emmc_pins>;
> + pinctrl-names = "default";
> +
> + bus-width = <8>;
> + cap-sd-highspeed;
> + cap-mmc-highspeed;
> + max-frequency = <200000000>;
> + non-removable;
> + disable-wp;
> + mmc-ddr-1_8v;
> + mmc-hs200-1_8v;
> +
> + mmc-pwrseq = <&emmc_pwrseq>;
> + vmmc-supply = <&vcc_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +};
> +
> +&pwm_ef {
> + status = "okay";
> + pinctrl-0 = <&pwm_e_pins>;
> + pinctrl-names = "default";
> + clocks = <&clkc CLKID_FCLK_DIV4>;
> + clock-names = "clkin0";
> +};
> +
> +/* This is connected to the Bluetooth module: */
> +&uart_A {
> + status = "okay";
> + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> + pinctrl-names = "default";
> + uart-has-rtscts;
> +};
> +
> +&uart_AO {
> + status = "okay";
> + pinctrl-0 = <&uart_ao_a_pins>;
> + pinctrl-names = "default";
> +};
>
Great Job !
It works perfectly on an P212 board.
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Thanks,
Neil
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design
@ 2017-02-28 13:50 ` Neil Armstrong
0 siblings, 0 replies; 21+ messages in thread
From: Neil Armstrong @ 2017-02-28 13:50 UTC (permalink / raw)
To: linus-amlogic
On 02/19/2017 11:41 PM, Martin Blumenstingl wrote:
> The Amlogic P212 reference design is used by other devices as well, such
> as (for example) the Khadas VIM boards. Thus this patch adds and moves
> all common entries from meson-gxl-s905x-p212.dts to a new, separate
> meson-gxl-s905x-p212.dtsi (which can be re-used on boards such as the
> Khadas VIM).
> Support for all boards based on the P212 reference design includes:
> - enabling IR support
> - enabling the SAR ADC (SARADC_CH1 is connected to a resistor which
> indicates the hardware revision, a similar design is found on the
> Khadas VIM boards)
> - all MMC controllers (which means that SDIO wifi, the SD card and the
> eMMC are now supported)
> - pwm_ef as dependency for the SDIO wifi module
> - uart_A which is connected to the bluetooth module (the bluetooth
> module itself is not enabled yet due to missing devicetree bindings
> for the Broadcom serial bluetooth devices)
> - uart_AO is moved to the .dtsi (as all known devices use it as their
> boot-console)
>
> Specific to the P212 board:
> - this also enables the CVBS connector (which is not available on the
> Khadas VIM boards for example)
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> .../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +-
> .../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 214 +++++++++++++++++++++
> 2 files changed, 226 insertions(+), 9 deletions(-)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> index 9639f012b02b..db31e093f40e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> @@ -43,23 +43,26 @@
>
> /dts-v1/;
>
> -#include "meson-gxl-s905x.dtsi"
> +#include "meson-gxl-s905x-p212.dtsi"
>
> / {
> compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
> model = "Amlogic Meson GXL (S905X) P212 Development Board";
>
> - aliases {
> - serial0 = &uart_AO;
> - };
> + cvbs-connector {
> + compatible = "composite-video-connector";
>
> - chosen {
> - stdout-path = "serial0:115200n8";
> + port {
> + cvbs_connector_in: endpoint {
> + remote-endpoint = <&cvbs_vdac_out>;
> + };
> + };
> };
> +};
>
> - memory at 0 {
> - device_type = "memory";
> - reg = <0x0 0x0 0x0 0x80000000>;
> +&cvbs_vdac_port {
> + cvbs_vdac_out: endpoint {
> + remote-endpoint = <&cvbs_connector_in>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> new file mode 100644
> index 000000000000..fb0e7c999cb6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> @@ -0,0 +1,214 @@
> +/*
> + * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
> + * Based on meson-gx-p23x-q20x.dtsi:
> + * - Copyright (c) 2016 Endless Computers, Inc.
> + * Author: Carlo Caione <carlo@endlessm.com>
> + * - Copyright (c) 2016 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/* Common DTSI for devices which are based on the P212 reference board. */
> +
> +#include "meson-gxl-s905x.dtsi"
> +
> +/ {
> + aliases {
> + serial0 = &uart_AO;
> + serial1 = &uart_A;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory at 0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x80000000>;
> + };
> +
> + vddio_boot: regulator-vddio_boot {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDIO_BOOT";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vddao_3v3: regulator-vddao_3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDAO_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + vddio_ao18: regulator-vddio_ao18 {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDIO_AO18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vcc_3v3: regulator-vcc_3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VCC_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + emmc_pwrseq: emmc-pwrseq {
> + compatible = "mmc-pwrseq-emmc";
> + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
> + };
> +
> + wifi32k: wifi32k {
> + compatible = "pwm-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
> + };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
> + clocks = <&wifi32k>;
> + clock-names = "ext_clock";
> + };
> +};
> +
> +ðmac {
> + status = "okay";
> +};
> +
> +&ir {
> + status = "okay";
> + pinctrl-0 = <&remote_input_ao_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&saradc {
> + status = "okay";
> + vref-supply = <&vddio_ao18>;
> +};
> +
> +/* Wireless SDIO Module */
> +&sd_emmc_a {
> + status = "okay";
> + pinctrl-0 = <&sdio_pins>;
> + pinctrl-names = "default";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + bus-width = <4>;
> + cap-sd-highspeed;
> + max-frequency = <100000000>;
> +
> + non-removable;
> + disable-wp;
> +
> + mmc-pwrseq = <&sdio_pwrseq>;
> +
> + vmmc-supply = <&vddao_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +
> + brcmf: bcrmf at 1 {
> + reg = <1>;
> + compatible = "brcm,bcm4329-fmac";
> + };
> +};
> +
> +/* SD card */
> +&sd_emmc_b {
> + status = "okay";
> + pinctrl-0 = <&sdcard_pins>;
> + pinctrl-names = "default";
> +
> + bus-width = <4>;
> + cap-sd-highspeed;
> + max-frequency = <100000000>;
> + disable-wp;
> +
> + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
> + cd-inverted;
> +
> + vmmc-supply = <&vddao_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +};
> +
> +/* eMMC */
> +&sd_emmc_c {
> + status = "okay";
> + pinctrl-0 = <&emmc_pins>;
> + pinctrl-names = "default";
> +
> + bus-width = <8>;
> + cap-sd-highspeed;
> + cap-mmc-highspeed;
> + max-frequency = <200000000>;
> + non-removable;
> + disable-wp;
> + mmc-ddr-1_8v;
> + mmc-hs200-1_8v;
> +
> + mmc-pwrseq = <&emmc_pwrseq>;
> + vmmc-supply = <&vcc_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +};
> +
> +&pwm_ef {
> + status = "okay";
> + pinctrl-0 = <&pwm_e_pins>;
> + pinctrl-names = "default";
> + clocks = <&clkc CLKID_FCLK_DIV4>;
> + clock-names = "clkin0";
> +};
> +
> +/* This is connected to the Bluetooth module: */
> +&uart_A {
> + status = "okay";
> + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> + pinctrl-names = "default";
> + uart-has-rtscts;
> +};
> +
> +&uart_AO {
> + status = "okay";
> + pinctrl-0 = <&uart_ao_a_pins>;
> + pinctrl-names = "default";
> +};
>
Great Job !
It works perfectly on an P212 board.
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Thanks,
Neil
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design
2017-02-19 22:41 ` Martin Blumenstingl
(?)
@ 2017-02-28 23:12 ` Rob Herring
-1 siblings, 0 replies; 21+ messages in thread
From: Rob Herring @ 2017-02-28 23:12 UTC (permalink / raw)
To: Martin Blumenstingl
Cc: linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Kevin Hilman,
Carlo Caione, Neil Armstrong,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, Will Deacon, Catalin Marinas,
Mark Rutland, Jerome Brunet
On Sun, Feb 19, 2017 at 4:41 PM, Martin Blumenstingl
<martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org> wrote:
> The Amlogic P212 reference design is used by other devices as well, such
> as (for example) the Khadas VIM boards. Thus this patch adds and moves
> all common entries from meson-gxl-s905x-p212.dts to a new, separate
> meson-gxl-s905x-p212.dtsi (which can be re-used on boards such as the
> Khadas VIM).
> Support for all boards based on the P212 reference design includes:
> - enabling IR support
> - enabling the SAR ADC (SARADC_CH1 is connected to a resistor which
> indicates the hardware revision, a similar design is found on the
> Khadas VIM boards)
> - all MMC controllers (which means that SDIO wifi, the SD card and the
> eMMC are now supported)
> - pwm_ef as dependency for the SDIO wifi module
> - uart_A which is connected to the bluetooth module (the bluetooth
> module itself is not enabled yet due to missing devicetree bindings
> for the Broadcom serial bluetooth devices)
> - uart_AO is moved to the .dtsi (as all known devices use it as their
> boot-console)
>
> Specific to the P212 board:
> - this also enables the CVBS connector (which is not available on the
> Khadas VIM boards for example)
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
> ---
> .../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +-
> .../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 214 +++++++++++++++++++++
> 2 files changed, 226 insertions(+), 9 deletions(-)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> index 9639f012b02b..db31e093f40e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> @@ -43,23 +43,26 @@
>
> /dts-v1/;
>
> -#include "meson-gxl-s905x.dtsi"
> +#include "meson-gxl-s905x-p212.dtsi"
>
> / {
> compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
> model = "Amlogic Meson GXL (S905X) P212 Development Board";
>
> - aliases {
> - serial0 = &uart_AO;
> - };
> + cvbs-connector {
> + compatible = "composite-video-connector";
>
> - chosen {
> - stdout-path = "serial0:115200n8";
> + port {
> + cvbs_connector_in: endpoint {
> + remote-endpoint = <&cvbs_vdac_out>;
> + };
> + };
> };
> +};
>
> - memory@0 {
> - device_type = "memory";
> - reg = <0x0 0x0 0x0 0x80000000>;
> +&cvbs_vdac_port {
> + cvbs_vdac_out: endpoint {
> + remote-endpoint = <&cvbs_connector_in>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> new file mode 100644
> index 000000000000..fb0e7c999cb6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> @@ -0,0 +1,214 @@
> +/*
> + * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>.
> + * Based on meson-gx-p23x-q20x.dtsi:
> + * - Copyright (c) 2016 Endless Computers, Inc.
> + * Author: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>
> + * - Copyright (c) 2016 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
Use SPDX tags here:
SPDX-License-Identifier: (GPL-2.0+ OR MIT)
While it says X11, this is really MIT license text.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design
@ 2017-02-28 23:12 ` Rob Herring
0 siblings, 0 replies; 21+ messages in thread
From: Rob Herring @ 2017-02-28 23:12 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, Feb 19, 2017 at 4:41 PM, Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
> The Amlogic P212 reference design is used by other devices as well, such
> as (for example) the Khadas VIM boards. Thus this patch adds and moves
> all common entries from meson-gxl-s905x-p212.dts to a new, separate
> meson-gxl-s905x-p212.dtsi (which can be re-used on boards such as the
> Khadas VIM).
> Support for all boards based on the P212 reference design includes:
> - enabling IR support
> - enabling the SAR ADC (SARADC_CH1 is connected to a resistor which
> indicates the hardware revision, a similar design is found on the
> Khadas VIM boards)
> - all MMC controllers (which means that SDIO wifi, the SD card and the
> eMMC are now supported)
> - pwm_ef as dependency for the SDIO wifi module
> - uart_A which is connected to the bluetooth module (the bluetooth
> module itself is not enabled yet due to missing devicetree bindings
> for the Broadcom serial bluetooth devices)
> - uart_AO is moved to the .dtsi (as all known devices use it as their
> boot-console)
>
> Specific to the P212 board:
> - this also enables the CVBS connector (which is not available on the
> Khadas VIM boards for example)
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> .../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +-
> .../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 214 +++++++++++++++++++++
> 2 files changed, 226 insertions(+), 9 deletions(-)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> index 9639f012b02b..db31e093f40e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> @@ -43,23 +43,26 @@
>
> /dts-v1/;
>
> -#include "meson-gxl-s905x.dtsi"
> +#include "meson-gxl-s905x-p212.dtsi"
>
> / {
> compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
> model = "Amlogic Meson GXL (S905X) P212 Development Board";
>
> - aliases {
> - serial0 = &uart_AO;
> - };
> + cvbs-connector {
> + compatible = "composite-video-connector";
>
> - chosen {
> - stdout-path = "serial0:115200n8";
> + port {
> + cvbs_connector_in: endpoint {
> + remote-endpoint = <&cvbs_vdac_out>;
> + };
> + };
> };
> +};
>
> - memory at 0 {
> - device_type = "memory";
> - reg = <0x0 0x0 0x0 0x80000000>;
> +&cvbs_vdac_port {
> + cvbs_vdac_out: endpoint {
> + remote-endpoint = <&cvbs_connector_in>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> new file mode 100644
> index 000000000000..fb0e7c999cb6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> @@ -0,0 +1,214 @@
> +/*
> + * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
> + * Based on meson-gx-p23x-q20x.dtsi:
> + * - Copyright (c) 2016 Endless Computers, Inc.
> + * Author: Carlo Caione <carlo@endlessm.com>
> + * - Copyright (c) 2016 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
Use SPDX tags here:
SPDX-License-Identifier: (GPL-2.0+ OR MIT)
While it says X11, this is really MIT license text.
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design
@ 2017-02-28 23:12 ` Rob Herring
0 siblings, 0 replies; 21+ messages in thread
From: Rob Herring @ 2017-02-28 23:12 UTC (permalink / raw)
To: linus-amlogic
On Sun, Feb 19, 2017 at 4:41 PM, Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
> The Amlogic P212 reference design is used by other devices as well, such
> as (for example) the Khadas VIM boards. Thus this patch adds and moves
> all common entries from meson-gxl-s905x-p212.dts to a new, separate
> meson-gxl-s905x-p212.dtsi (which can be re-used on boards such as the
> Khadas VIM).
> Support for all boards based on the P212 reference design includes:
> - enabling IR support
> - enabling the SAR ADC (SARADC_CH1 is connected to a resistor which
> indicates the hardware revision, a similar design is found on the
> Khadas VIM boards)
> - all MMC controllers (which means that SDIO wifi, the SD card and the
> eMMC are now supported)
> - pwm_ef as dependency for the SDIO wifi module
> - uart_A which is connected to the bluetooth module (the bluetooth
> module itself is not enabled yet due to missing devicetree bindings
> for the Broadcom serial bluetooth devices)
> - uart_AO is moved to the .dtsi (as all known devices use it as their
> boot-console)
>
> Specific to the P212 board:
> - this also enables the CVBS connector (which is not available on the
> Khadas VIM boards for example)
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> .../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +-
> .../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 214 +++++++++++++++++++++
> 2 files changed, 226 insertions(+), 9 deletions(-)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> index 9639f012b02b..db31e093f40e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> @@ -43,23 +43,26 @@
>
> /dts-v1/;
>
> -#include "meson-gxl-s905x.dtsi"
> +#include "meson-gxl-s905x-p212.dtsi"
>
> / {
> compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
> model = "Amlogic Meson GXL (S905X) P212 Development Board";
>
> - aliases {
> - serial0 = &uart_AO;
> - };
> + cvbs-connector {
> + compatible = "composite-video-connector";
>
> - chosen {
> - stdout-path = "serial0:115200n8";
> + port {
> + cvbs_connector_in: endpoint {
> + remote-endpoint = <&cvbs_vdac_out>;
> + };
> + };
> };
> +};
>
> - memory at 0 {
> - device_type = "memory";
> - reg = <0x0 0x0 0x0 0x80000000>;
> +&cvbs_vdac_port {
> + cvbs_vdac_out: endpoint {
> + remote-endpoint = <&cvbs_connector_in>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> new file mode 100644
> index 000000000000..fb0e7c999cb6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> @@ -0,0 +1,214 @@
> +/*
> + * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
> + * Based on meson-gx-p23x-q20x.dtsi:
> + * - Copyright (c) 2016 Endless Computers, Inc.
> + * Author: Carlo Caione <carlo@endlessm.com>
> + * - Copyright (c) 2016 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
Use SPDX tags here:
SPDX-License-Identifier: (GPL-2.0+ OR MIT)
While it says X11, this is really MIT license text.
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 0/1] meson-gxl: improve support for the P212 board
2017-02-19 22:41 ` Martin Blumenstingl
(?)
@ 2017-03-04 9:52 ` Martin Blumenstingl
-1 siblings, 0 replies; 21+ messages in thread
From: Martin Blumenstingl @ 2017-03-04 9:52 UTC (permalink / raw)
To: linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
khilman-rdvid1DuHRBWk0Htik3J/w, carlo-KA+7E9HrN00dnm+yROfE0A,
narmstrong-rdvid1DuHRBWk0Htik3J/w
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, will.deacon-5wv7dgnIgG8,
catalin.marinas-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, jbrunet-rdvid1DuHRBWk0Htik3J/w,
Martin Blumenstingl
The P212 board is a reference design and re-used by other boards (similar
to the meson-gxbb-p20x.dtsi which is inherited by the Wetek boards).
Until now only very basic functionality was supported, but most of the
interesting things (wifi, SD, eMMC, IR, etc.) are not enabled yet - which
changes with this patch.
Neil Armstrong kindly took take the information he had from Amlogic for
the P212 board itself and built a list of supported features and
differences with the Khadas VIM boards (which are based on the P212
reference design). This patch is a result of that.
I have tested this with a Khadas VIM board (patch for this will follow)
as I don't have a P212 board itself. Thus it would be nice if someone
could test it on an actual P212 board.
Please also specifically review the copyright statements in
meson-gxl-s905x-p212.dtsi - I want to make sure I didn't mess anything
up there.
Changes since v1:
- update the cover letter to indicate where the information about the
P212 reference design came from
- use SPDX tags instead of including the full license text
- removed the brcmf sub-node of the sd_emmc_a node as the P212 reference
design uses a Realtek based wifi chip (and updated the commit
description accordingly)
- included Neil's Tested-By
Martin Blumenstingl (1):
ARM64: dts: meson-gxl: improve support for the P212 reference design
.../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +--
.../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 173 +++++++++++++++++++++
2 files changed, 185 insertions(+), 9 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
--
2.12.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 0/1] meson-gxl: improve support for the P212 board
@ 2017-03-04 9:52 ` Martin Blumenstingl
0 siblings, 0 replies; 21+ messages in thread
From: Martin Blumenstingl @ 2017-03-04 9:52 UTC (permalink / raw)
To: linux-arm-kernel
The P212 board is a reference design and re-used by other boards (similar
to the meson-gxbb-p20x.dtsi which is inherited by the Wetek boards).
Until now only very basic functionality was supported, but most of the
interesting things (wifi, SD, eMMC, IR, etc.) are not enabled yet - which
changes with this patch.
Neil Armstrong kindly took take the information he had from Amlogic for
the P212 board itself and built a list of supported features and
differences with the Khadas VIM boards (which are based on the P212
reference design). This patch is a result of that.
I have tested this with a Khadas VIM board (patch for this will follow)
as I don't have a P212 board itself. Thus it would be nice if someone
could test it on an actual P212 board.
Please also specifically review the copyright statements in
meson-gxl-s905x-p212.dtsi - I want to make sure I didn't mess anything
up there.
Changes since v1:
- update the cover letter to indicate where the information about the
P212 reference design came from
- use SPDX tags instead of including the full license text
- removed the brcmf sub-node of the sd_emmc_a node as the P212 reference
design uses a Realtek based wifi chip (and updated the commit
description accordingly)
- included Neil's Tested-By
Martin Blumenstingl (1):
ARM64: dts: meson-gxl: improve support for the P212 reference design
.../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +--
.../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 173 +++++++++++++++++++++
2 files changed, 185 insertions(+), 9 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
--
2.12.0
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 0/1] meson-gxl: improve support for the P212 board
@ 2017-03-04 9:52 ` Martin Blumenstingl
0 siblings, 0 replies; 21+ messages in thread
From: Martin Blumenstingl @ 2017-03-04 9:52 UTC (permalink / raw)
To: linus-amlogic
The P212 board is a reference design and re-used by other boards (similar
to the meson-gxbb-p20x.dtsi which is inherited by the Wetek boards).
Until now only very basic functionality was supported, but most of the
interesting things (wifi, SD, eMMC, IR, etc.) are not enabled yet - which
changes with this patch.
Neil Armstrong kindly took take the information he had from Amlogic for
the P212 board itself and built a list of supported features and
differences with the Khadas VIM boards (which are based on the P212
reference design). This patch is a result of that.
I have tested this with a Khadas VIM board (patch for this will follow)
as I don't have a P212 board itself. Thus it would be nice if someone
could test it on an actual P212 board.
Please also specifically review the copyright statements in
meson-gxl-s905x-p212.dtsi - I want to make sure I didn't mess anything
up there.
Changes since v1:
- update the cover letter to indicate where the information about the
P212 reference design came from
- use SPDX tags instead of including the full license text
- removed the brcmf sub-node of the sd_emmc_a node as the P212 reference
design uses a Realtek based wifi chip (and updated the commit
description accordingly)
- included Neil's Tested-By
Martin Blumenstingl (1):
ARM64: dts: meson-gxl: improve support for the P212 reference design
.../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +--
.../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 173 +++++++++++++++++++++
2 files changed, 185 insertions(+), 9 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
--
2.12.0
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design
2017-03-04 9:52 ` Martin Blumenstingl
(?)
@ 2017-03-04 9:52 ` Martin Blumenstingl
-1 siblings, 0 replies; 21+ messages in thread
From: Martin Blumenstingl @ 2017-03-04 9:52 UTC (permalink / raw)
To: linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
khilman-rdvid1DuHRBWk0Htik3J/w, carlo-KA+7E9HrN00dnm+yROfE0A,
narmstrong-rdvid1DuHRBWk0Htik3J/w
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, will.deacon-5wv7dgnIgG8,
catalin.marinas-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, jbrunet-rdvid1DuHRBWk0Htik3J/w,
Martin Blumenstingl
The Amlogic P212 reference design is used by other devices as well, such
as (for example) the Khadas VIM boards. Thus this patch adds and moves
all common entries from meson-gxl-s905x-p212.dts to a new, separate
meson-gxl-s905x-p212.dtsi (which can be re-used on boards such as the
Khadas VIM).
Support for all boards based on the P212 reference design includes:
- enabling IR support
- enabling the SAR ADC (SARADC_CH1 is connected to a resistor which
indicates the hardware revision, a similar design is found on the
Khadas VIM boards)
- all MMC controllers (which means that SDIO wifi, the SD card and the
eMMC are now supported)
- pwm_ef as dependency for the SDIO wifi modules
- uart_A which is connected to the bluetooth module (the bluetooth
module itself is not enabled yet due to missing devicetree bindings
for the Broadcom serial bluetooth devices)
- uart_AO is moved to the .dtsi (as all known devices use it as their
boot-console)
Specific to the P212 board:
- this also enables the CVBS connector (which is not available on the
Khadas VIM boards for example)
- Realtek based SDIO wifi (instead of Broadcom which most other devices
use)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
Tested-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
.../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +--
.../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 173 +++++++++++++++++++++
2 files changed, 185 insertions(+), 9 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
index 9639f012b02b..db31e093f40e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
@@ -43,23 +43,26 @@
/dts-v1/;
-#include "meson-gxl-s905x.dtsi"
+#include "meson-gxl-s905x-p212.dtsi"
/ {
compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
model = "Amlogic Meson GXL (S905X) P212 Development Board";
- aliases {
- serial0 = &uart_AO;
- };
+ cvbs-connector {
+ compatible = "composite-video-connector";
- chosen {
- stdout-path = "serial0:115200n8";
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
};
+};
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
new file mode 100644
index 000000000000..f3eea8e89d12
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -0,0 +1,173 @@
+/*
+ * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>.
+ * Based on meson-gx-p23x-q20x.dtsi:
+ * - Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>
+ * - Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/* Common DTSI for devices which are based on the P212 reference board. */
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart_AO;
+ serial1 = &uart_A;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ vddio_boot: regulator-vddio_boot {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vddio_ao18: regulator-vddio_ao18 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+};
+
+ðmac {
+ status = "okay";
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+ status = "okay";
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
--
2.12.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v2 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design
@ 2017-03-04 9:52 ` Martin Blumenstingl
0 siblings, 0 replies; 21+ messages in thread
From: Martin Blumenstingl @ 2017-03-04 9:52 UTC (permalink / raw)
To: linux-arm-kernel
The Amlogic P212 reference design is used by other devices as well, such
as (for example) the Khadas VIM boards. Thus this patch adds and moves
all common entries from meson-gxl-s905x-p212.dts to a new, separate
meson-gxl-s905x-p212.dtsi (which can be re-used on boards such as the
Khadas VIM).
Support for all boards based on the P212 reference design includes:
- enabling IR support
- enabling the SAR ADC (SARADC_CH1 is connected to a resistor which
indicates the hardware revision, a similar design is found on the
Khadas VIM boards)
- all MMC controllers (which means that SDIO wifi, the SD card and the
eMMC are now supported)
- pwm_ef as dependency for the SDIO wifi modules
- uart_A which is connected to the bluetooth module (the bluetooth
module itself is not enabled yet due to missing devicetree bindings
for the Broadcom serial bluetooth devices)
- uart_AO is moved to the .dtsi (as all known devices use it as their
boot-console)
Specific to the P212 board:
- this also enables the CVBS connector (which is not available on the
Khadas VIM boards for example)
- Realtek based SDIO wifi (instead of Broadcom which most other devices
use)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +--
.../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 173 +++++++++++++++++++++
2 files changed, 185 insertions(+), 9 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
index 9639f012b02b..db31e093f40e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
@@ -43,23 +43,26 @@
/dts-v1/;
-#include "meson-gxl-s905x.dtsi"
+#include "meson-gxl-s905x-p212.dtsi"
/ {
compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
model = "Amlogic Meson GXL (S905X) P212 Development Board";
- aliases {
- serial0 = &uart_AO;
- };
+ cvbs-connector {
+ compatible = "composite-video-connector";
- chosen {
- stdout-path = "serial0:115200n8";
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
};
+};
- memory at 0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
new file mode 100644
index 000000000000..f3eea8e89d12
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -0,0 +1,173 @@
+/*
+ * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Based on meson-gx-p23x-q20x.dtsi:
+ * - Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ * - Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/* Common DTSI for devices which are based on the P212 reference board. */
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart_AO;
+ serial1 = &uart_A;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ vddio_boot: regulator-vddio_boot {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vddio_ao18: regulator-vddio_ao18 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+};
+
+ðmac {
+ status = "okay";
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+ status = "okay";
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
--
2.12.0
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v2 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design
@ 2017-03-04 9:52 ` Martin Blumenstingl
0 siblings, 0 replies; 21+ messages in thread
From: Martin Blumenstingl @ 2017-03-04 9:52 UTC (permalink / raw)
To: linus-amlogic
The Amlogic P212 reference design is used by other devices as well, such
as (for example) the Khadas VIM boards. Thus this patch adds and moves
all common entries from meson-gxl-s905x-p212.dts to a new, separate
meson-gxl-s905x-p212.dtsi (which can be re-used on boards such as the
Khadas VIM).
Support for all boards based on the P212 reference design includes:
- enabling IR support
- enabling the SAR ADC (SARADC_CH1 is connected to a resistor which
indicates the hardware revision, a similar design is found on the
Khadas VIM boards)
- all MMC controllers (which means that SDIO wifi, the SD card and the
eMMC are now supported)
- pwm_ef as dependency for the SDIO wifi modules
- uart_A which is connected to the bluetooth module (the bluetooth
module itself is not enabled yet due to missing devicetree bindings
for the Broadcom serial bluetooth devices)
- uart_AO is moved to the .dtsi (as all known devices use it as their
boot-console)
Specific to the P212 board:
- this also enables the CVBS connector (which is not available on the
Khadas VIM boards for example)
- Realtek based SDIO wifi (instead of Broadcom which most other devices
use)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +--
.../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 173 +++++++++++++++++++++
2 files changed, 185 insertions(+), 9 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
index 9639f012b02b..db31e093f40e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
@@ -43,23 +43,26 @@
/dts-v1/;
-#include "meson-gxl-s905x.dtsi"
+#include "meson-gxl-s905x-p212.dtsi"
/ {
compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
model = "Amlogic Meson GXL (S905X) P212 Development Board";
- aliases {
- serial0 = &uart_AO;
- };
+ cvbs-connector {
+ compatible = "composite-video-connector";
- chosen {
- stdout-path = "serial0:115200n8";
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
};
+};
- memory at 0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
new file mode 100644
index 000000000000..f3eea8e89d12
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -0,0 +1,173 @@
+/*
+ * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Based on meson-gx-p23x-q20x.dtsi:
+ * - Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ * - Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/* Common DTSI for devices which are based on the P212 reference board. */
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart_AO;
+ serial1 = &uart_A;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ vddio_boot: regulator-vddio_boot {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vddio_ao18: regulator-vddio_ao18 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+};
+
+ðmac {
+ status = "okay";
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+ status = "okay";
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
--
2.12.0
^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH v2 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design
2017-03-04 9:52 ` Martin Blumenstingl
(?)
@ 2017-03-14 22:34 ` Kevin Hilman
-1 siblings, 0 replies; 21+ messages in thread
From: Kevin Hilman @ 2017-03-14 22:34 UTC (permalink / raw)
To: Martin Blumenstingl
Cc: linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
carlo-KA+7E9HrN00dnm+yROfE0A, narmstrong-rdvid1DuHRBWk0Htik3J/w,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, will.deacon-5wv7dgnIgG8,
catalin.marinas-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, jbrunet-rdvid1DuHRBWk0Htik3J/w
Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org> writes:
> The Amlogic P212 reference design is used by other devices as well, such
> as (for example) the Khadas VIM boards. Thus this patch adds and moves
> all common entries from meson-gxl-s905x-p212.dts to a new, separate
> meson-gxl-s905x-p212.dtsi (which can be re-used on boards such as the
> Khadas VIM).
> Support for all boards based on the P212 reference design includes:
> - enabling IR support
> - enabling the SAR ADC (SARADC_CH1 is connected to a resistor which
> indicates the hardware revision, a similar design is found on the
> Khadas VIM boards)
> - all MMC controllers (which means that SDIO wifi, the SD card and the
> eMMC are now supported)
> - pwm_ef as dependency for the SDIO wifi modules
> - uart_A which is connected to the bluetooth module (the bluetooth
> module itself is not enabled yet due to missing devicetree bindings
> for the Broadcom serial bluetooth devices)
> - uart_AO is moved to the .dtsi (as all known devices use it as their
> boot-console)
>
> Specific to the P212 board:
> - this also enables the CVBS connector (which is not available on the
> Khadas VIM boards for example)
> - Realtek based SDIO wifi (instead of Broadcom which most other devices
> use)
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
> Tested-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
I also gave this a spin on P212 board and it's working well.
Applied to v4.12/dt64
Kevin
> ---
> .../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +--
> .../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 173 +++++++++++++++++++++
> 2 files changed, 185 insertions(+), 9 deletions(-)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> index 9639f012b02b..db31e093f40e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> @@ -43,23 +43,26 @@
>
> /dts-v1/;
>
> -#include "meson-gxl-s905x.dtsi"
> +#include "meson-gxl-s905x-p212.dtsi"
>
> / {
> compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
> model = "Amlogic Meson GXL (S905X) P212 Development Board";
>
> - aliases {
> - serial0 = &uart_AO;
> - };
> + cvbs-connector {
> + compatible = "composite-video-connector";
>
> - chosen {
> - stdout-path = "serial0:115200n8";
> + port {
> + cvbs_connector_in: endpoint {
> + remote-endpoint = <&cvbs_vdac_out>;
> + };
> + };
> };
> +};
>
> - memory@0 {
> - device_type = "memory";
> - reg = <0x0 0x0 0x0 0x80000000>;
> +&cvbs_vdac_port {
> + cvbs_vdac_out: endpoint {
> + remote-endpoint = <&cvbs_connector_in>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> new file mode 100644
> index 000000000000..f3eea8e89d12
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> @@ -0,0 +1,173 @@
> +/*
> + * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>.
> + * Based on meson-gx-p23x-q20x.dtsi:
> + * - Copyright (c) 2016 Endless Computers, Inc.
> + * Author: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>
> + * - Copyright (c) 2016 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> + */
> +
> +/* Common DTSI for devices which are based on the P212 reference board. */
> +
> +#include "meson-gxl-s905x.dtsi"
> +
> +/ {
> + aliases {
> + serial0 = &uart_AO;
> + serial1 = &uart_A;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x80000000>;
> + };
> +
> + vddio_boot: regulator-vddio_boot {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDIO_BOOT";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vddao_3v3: regulator-vddao_3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDAO_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + vddio_ao18: regulator-vddio_ao18 {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDIO_AO18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vcc_3v3: regulator-vcc_3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VCC_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + emmc_pwrseq: emmc-pwrseq {
> + compatible = "mmc-pwrseq-emmc";
> + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
> + };
> +
> + wifi32k: wifi32k {
> + compatible = "pwm-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
> + };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
> + clocks = <&wifi32k>;
> + clock-names = "ext_clock";
> + };
> +};
> +
> +ðmac {
> + status = "okay";
> +};
> +
> +&ir {
> + status = "okay";
> + pinctrl-0 = <&remote_input_ao_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&saradc {
> + status = "okay";
> + vref-supply = <&vddio_ao18>;
> +};
> +
> +/* Wireless SDIO Module */
> +&sd_emmc_a {
> + status = "okay";
> + pinctrl-0 = <&sdio_pins>;
> + pinctrl-names = "default";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + bus-width = <4>;
> + cap-sd-highspeed;
> + max-frequency = <100000000>;
> +
> + non-removable;
> + disable-wp;
> +
> + mmc-pwrseq = <&sdio_pwrseq>;
> +
> + vmmc-supply = <&vddao_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +};
> +
> +/* SD card */
> +&sd_emmc_b {
> + status = "okay";
> + pinctrl-0 = <&sdcard_pins>;
> + pinctrl-names = "default";
> +
> + bus-width = <4>;
> + cap-sd-highspeed;
> + max-frequency = <100000000>;
> + disable-wp;
> +
> + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
> + cd-inverted;
> +
> + vmmc-supply = <&vddao_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +};
> +
> +/* eMMC */
> +&sd_emmc_c {
> + status = "okay";
> + pinctrl-0 = <&emmc_pins>;
> + pinctrl-names = "default";
> +
> + bus-width = <8>;
> + cap-sd-highspeed;
> + cap-mmc-highspeed;
> + max-frequency = <200000000>;
> + non-removable;
> + disable-wp;
> + mmc-ddr-1_8v;
> + mmc-hs200-1_8v;
> +
> + mmc-pwrseq = <&emmc_pwrseq>;
> + vmmc-supply = <&vcc_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +};
> +
> +&pwm_ef {
> + status = "okay";
> + pinctrl-0 = <&pwm_e_pins>;
> + pinctrl-names = "default";
> + clocks = <&clkc CLKID_FCLK_DIV4>;
> + clock-names = "clkin0";
> +};
> +
> +/* This is connected to the Bluetooth module: */
> +&uart_A {
> + status = "okay";
> + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> + pinctrl-names = "default";
> + uart-has-rtscts;
> +};
> +
> +&uart_AO {
> + status = "okay";
> + pinctrl-0 = <&uart_ao_a_pins>;
> + pinctrl-names = "default";
> +};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design
@ 2017-03-14 22:34 ` Kevin Hilman
0 siblings, 0 replies; 21+ messages in thread
From: Kevin Hilman @ 2017-03-14 22:34 UTC (permalink / raw)
To: linux-arm-kernel
Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:
> The Amlogic P212 reference design is used by other devices as well, such
> as (for example) the Khadas VIM boards. Thus this patch adds and moves
> all common entries from meson-gxl-s905x-p212.dts to a new, separate
> meson-gxl-s905x-p212.dtsi (which can be re-used on boards such as the
> Khadas VIM).
> Support for all boards based on the P212 reference design includes:
> - enabling IR support
> - enabling the SAR ADC (SARADC_CH1 is connected to a resistor which
> indicates the hardware revision, a similar design is found on the
> Khadas VIM boards)
> - all MMC controllers (which means that SDIO wifi, the SD card and the
> eMMC are now supported)
> - pwm_ef as dependency for the SDIO wifi modules
> - uart_A which is connected to the bluetooth module (the bluetooth
> module itself is not enabled yet due to missing devicetree bindings
> for the Broadcom serial bluetooth devices)
> - uart_AO is moved to the .dtsi (as all known devices use it as their
> boot-console)
>
> Specific to the P212 board:
> - this also enables the CVBS connector (which is not available on the
> Khadas VIM boards for example)
> - Realtek based SDIO wifi (instead of Broadcom which most other devices
> use)
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Tested-by: Neil Armstrong <narmstrong@baylibre.com>
I also gave this a spin on P212 board and it's working well.
Applied to v4.12/dt64
Kevin
> ---
> .../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +--
> .../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 173 +++++++++++++++++++++
> 2 files changed, 185 insertions(+), 9 deletions(-)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> index 9639f012b02b..db31e093f40e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> @@ -43,23 +43,26 @@
>
> /dts-v1/;
>
> -#include "meson-gxl-s905x.dtsi"
> +#include "meson-gxl-s905x-p212.dtsi"
>
> / {
> compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
> model = "Amlogic Meson GXL (S905X) P212 Development Board";
>
> - aliases {
> - serial0 = &uart_AO;
> - };
> + cvbs-connector {
> + compatible = "composite-video-connector";
>
> - chosen {
> - stdout-path = "serial0:115200n8";
> + port {
> + cvbs_connector_in: endpoint {
> + remote-endpoint = <&cvbs_vdac_out>;
> + };
> + };
> };
> +};
>
> - memory at 0 {
> - device_type = "memory";
> - reg = <0x0 0x0 0x0 0x80000000>;
> +&cvbs_vdac_port {
> + cvbs_vdac_out: endpoint {
> + remote-endpoint = <&cvbs_connector_in>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> new file mode 100644
> index 000000000000..f3eea8e89d12
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> @@ -0,0 +1,173 @@
> +/*
> + * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
> + * Based on meson-gx-p23x-q20x.dtsi:
> + * - Copyright (c) 2016 Endless Computers, Inc.
> + * Author: Carlo Caione <carlo@endlessm.com>
> + * - Copyright (c) 2016 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> + */
> +
> +/* Common DTSI for devices which are based on the P212 reference board. */
> +
> +#include "meson-gxl-s905x.dtsi"
> +
> +/ {
> + aliases {
> + serial0 = &uart_AO;
> + serial1 = &uart_A;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory at 0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x80000000>;
> + };
> +
> + vddio_boot: regulator-vddio_boot {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDIO_BOOT";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vddao_3v3: regulator-vddao_3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDAO_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + vddio_ao18: regulator-vddio_ao18 {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDIO_AO18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vcc_3v3: regulator-vcc_3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VCC_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + emmc_pwrseq: emmc-pwrseq {
> + compatible = "mmc-pwrseq-emmc";
> + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
> + };
> +
> + wifi32k: wifi32k {
> + compatible = "pwm-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
> + };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
> + clocks = <&wifi32k>;
> + clock-names = "ext_clock";
> + };
> +};
> +
> +ðmac {
> + status = "okay";
> +};
> +
> +&ir {
> + status = "okay";
> + pinctrl-0 = <&remote_input_ao_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&saradc {
> + status = "okay";
> + vref-supply = <&vddio_ao18>;
> +};
> +
> +/* Wireless SDIO Module */
> +&sd_emmc_a {
> + status = "okay";
> + pinctrl-0 = <&sdio_pins>;
> + pinctrl-names = "default";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + bus-width = <4>;
> + cap-sd-highspeed;
> + max-frequency = <100000000>;
> +
> + non-removable;
> + disable-wp;
> +
> + mmc-pwrseq = <&sdio_pwrseq>;
> +
> + vmmc-supply = <&vddao_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +};
> +
> +/* SD card */
> +&sd_emmc_b {
> + status = "okay";
> + pinctrl-0 = <&sdcard_pins>;
> + pinctrl-names = "default";
> +
> + bus-width = <4>;
> + cap-sd-highspeed;
> + max-frequency = <100000000>;
> + disable-wp;
> +
> + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
> + cd-inverted;
> +
> + vmmc-supply = <&vddao_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +};
> +
> +/* eMMC */
> +&sd_emmc_c {
> + status = "okay";
> + pinctrl-0 = <&emmc_pins>;
> + pinctrl-names = "default";
> +
> + bus-width = <8>;
> + cap-sd-highspeed;
> + cap-mmc-highspeed;
> + max-frequency = <200000000>;
> + non-removable;
> + disable-wp;
> + mmc-ddr-1_8v;
> + mmc-hs200-1_8v;
> +
> + mmc-pwrseq = <&emmc_pwrseq>;
> + vmmc-supply = <&vcc_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +};
> +
> +&pwm_ef {
> + status = "okay";
> + pinctrl-0 = <&pwm_e_pins>;
> + pinctrl-names = "default";
> + clocks = <&clkc CLKID_FCLK_DIV4>;
> + clock-names = "clkin0";
> +};
> +
> +/* This is connected to the Bluetooth module: */
> +&uart_A {
> + status = "okay";
> + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> + pinctrl-names = "default";
> + uart-has-rtscts;
> +};
> +
> +&uart_AO {
> + status = "okay";
> + pinctrl-0 = <&uart_ao_a_pins>;
> + pinctrl-names = "default";
> +};
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design
@ 2017-03-14 22:34 ` Kevin Hilman
0 siblings, 0 replies; 21+ messages in thread
From: Kevin Hilman @ 2017-03-14 22:34 UTC (permalink / raw)
To: linus-amlogic
Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:
> The Amlogic P212 reference design is used by other devices as well, such
> as (for example) the Khadas VIM boards. Thus this patch adds and moves
> all common entries from meson-gxl-s905x-p212.dts to a new, separate
> meson-gxl-s905x-p212.dtsi (which can be re-used on boards such as the
> Khadas VIM).
> Support for all boards based on the P212 reference design includes:
> - enabling IR support
> - enabling the SAR ADC (SARADC_CH1 is connected to a resistor which
> indicates the hardware revision, a similar design is found on the
> Khadas VIM boards)
> - all MMC controllers (which means that SDIO wifi, the SD card and the
> eMMC are now supported)
> - pwm_ef as dependency for the SDIO wifi modules
> - uart_A which is connected to the bluetooth module (the bluetooth
> module itself is not enabled yet due to missing devicetree bindings
> for the Broadcom serial bluetooth devices)
> - uart_AO is moved to the .dtsi (as all known devices use it as their
> boot-console)
>
> Specific to the P212 board:
> - this also enables the CVBS connector (which is not available on the
> Khadas VIM boards for example)
> - Realtek based SDIO wifi (instead of Broadcom which most other devices
> use)
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Tested-by: Neil Armstrong <narmstrong@baylibre.com>
I also gave this a spin on P212 board and it's working well.
Applied to v4.12/dt64
Kevin
> ---
> .../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +--
> .../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 173 +++++++++++++++++++++
> 2 files changed, 185 insertions(+), 9 deletions(-)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> index 9639f012b02b..db31e093f40e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> @@ -43,23 +43,26 @@
>
> /dts-v1/;
>
> -#include "meson-gxl-s905x.dtsi"
> +#include "meson-gxl-s905x-p212.dtsi"
>
> / {
> compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
> model = "Amlogic Meson GXL (S905X) P212 Development Board";
>
> - aliases {
> - serial0 = &uart_AO;
> - };
> + cvbs-connector {
> + compatible = "composite-video-connector";
>
> - chosen {
> - stdout-path = "serial0:115200n8";
> + port {
> + cvbs_connector_in: endpoint {
> + remote-endpoint = <&cvbs_vdac_out>;
> + };
> + };
> };
> +};
>
> - memory at 0 {
> - device_type = "memory";
> - reg = <0x0 0x0 0x0 0x80000000>;
> +&cvbs_vdac_port {
> + cvbs_vdac_out: endpoint {
> + remote-endpoint = <&cvbs_connector_in>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> new file mode 100644
> index 000000000000..f3eea8e89d12
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
> @@ -0,0 +1,173 @@
> +/*
> + * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
> + * Based on meson-gx-p23x-q20x.dtsi:
> + * - Copyright (c) 2016 Endless Computers, Inc.
> + * Author: Carlo Caione <carlo@endlessm.com>
> + * - Copyright (c) 2016 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> + */
> +
> +/* Common DTSI for devices which are based on the P212 reference board. */
> +
> +#include "meson-gxl-s905x.dtsi"
> +
> +/ {
> + aliases {
> + serial0 = &uart_AO;
> + serial1 = &uart_A;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory at 0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x80000000>;
> + };
> +
> + vddio_boot: regulator-vddio_boot {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDIO_BOOT";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vddao_3v3: regulator-vddao_3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDAO_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + vddio_ao18: regulator-vddio_ao18 {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDIO_AO18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vcc_3v3: regulator-vcc_3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VCC_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + emmc_pwrseq: emmc-pwrseq {
> + compatible = "mmc-pwrseq-emmc";
> + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
> + };
> +
> + wifi32k: wifi32k {
> + compatible = "pwm-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
> + };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
> + clocks = <&wifi32k>;
> + clock-names = "ext_clock";
> + };
> +};
> +
> +ðmac {
> + status = "okay";
> +};
> +
> +&ir {
> + status = "okay";
> + pinctrl-0 = <&remote_input_ao_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&saradc {
> + status = "okay";
> + vref-supply = <&vddio_ao18>;
> +};
> +
> +/* Wireless SDIO Module */
> +&sd_emmc_a {
> + status = "okay";
> + pinctrl-0 = <&sdio_pins>;
> + pinctrl-names = "default";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + bus-width = <4>;
> + cap-sd-highspeed;
> + max-frequency = <100000000>;
> +
> + non-removable;
> + disable-wp;
> +
> + mmc-pwrseq = <&sdio_pwrseq>;
> +
> + vmmc-supply = <&vddao_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +};
> +
> +/* SD card */
> +&sd_emmc_b {
> + status = "okay";
> + pinctrl-0 = <&sdcard_pins>;
> + pinctrl-names = "default";
> +
> + bus-width = <4>;
> + cap-sd-highspeed;
> + max-frequency = <100000000>;
> + disable-wp;
> +
> + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
> + cd-inverted;
> +
> + vmmc-supply = <&vddao_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +};
> +
> +/* eMMC */
> +&sd_emmc_c {
> + status = "okay";
> + pinctrl-0 = <&emmc_pins>;
> + pinctrl-names = "default";
> +
> + bus-width = <8>;
> + cap-sd-highspeed;
> + cap-mmc-highspeed;
> + max-frequency = <200000000>;
> + non-removable;
> + disable-wp;
> + mmc-ddr-1_8v;
> + mmc-hs200-1_8v;
> +
> + mmc-pwrseq = <&emmc_pwrseq>;
> + vmmc-supply = <&vcc_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +};
> +
> +&pwm_ef {
> + status = "okay";
> + pinctrl-0 = <&pwm_e_pins>;
> + pinctrl-names = "default";
> + clocks = <&clkc CLKID_FCLK_DIV4>;
> + clock-names = "clkin0";
> +};
> +
> +/* This is connected to the Bluetooth module: */
> +&uart_A {
> + status = "okay";
> + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> + pinctrl-names = "default";
> + uart-has-rtscts;
> +};
> +
> +&uart_AO {
> + status = "okay";
> + pinctrl-0 = <&uart_ao_a_pins>;
> + pinctrl-names = "default";
> +};
^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2017-03-14 22:34 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-19 22:41 [PATCH 0/1] meson-gxl: improve support for the P212 board Martin Blumenstingl
2017-02-19 22:41 ` Martin Blumenstingl
2017-02-19 22:41 ` Martin Blumenstingl
[not found] ` <20170219224114.17201-1-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2017-02-19 22:41 ` [PATCH 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design Martin Blumenstingl
2017-02-19 22:41 ` Martin Blumenstingl
2017-02-19 22:41 ` Martin Blumenstingl
[not found] ` <20170219224114.17201-2-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2017-02-28 13:50 ` Neil Armstrong
2017-02-28 13:50 ` Neil Armstrong
2017-02-28 13:50 ` Neil Armstrong
2017-02-28 23:12 ` Rob Herring
2017-02-28 23:12 ` Rob Herring
2017-02-28 23:12 ` Rob Herring
2017-03-04 9:52 ` [PATCH v2 0/1] meson-gxl: improve support for the P212 board Martin Blumenstingl
2017-03-04 9:52 ` Martin Blumenstingl
2017-03-04 9:52 ` Martin Blumenstingl
[not found] ` <20170304095213.8221-1-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2017-03-04 9:52 ` [PATCH v2 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design Martin Blumenstingl
2017-03-04 9:52 ` Martin Blumenstingl
2017-03-04 9:52 ` Martin Blumenstingl
[not found] ` <20170304095213.8221-2-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2017-03-14 22:34 ` Kevin Hilman
2017-03-14 22:34 ` Kevin Hilman
2017-03-14 22:34 ` Kevin Hilman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.