[PATCH V2 1/3] spi/bcm63xx-hsspi: allow providing clock rate through a second clock

[PATCH V2 1/3] spi/bcm63xx-hsspi: allow providing clock rate through a second clock

[Jonas Gorski]

The HSSPI block actually has two clock inputs, one for gating the block,
and one for the PLL rate. To allow these to be represented as two clocks,
add support for retrieving the rate from a separate "pll" clock, if the
"hsspi" clock does not provide one.

Signed-off-by: Jonas Gorski <jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Acked-by: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
Changes v1 -> v2:
 * Rewrote commmit message after confirmation from Florian
 * Added Florian's Ack

 drivers/spi/spi-bcm63xx-hsspi.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c
index 55789f7cda92..79096d17ebde 100644
--- a/drivers/spi/spi-bcm63xx-hsspi.c
+++ b/drivers/spi/spi-bcm63xx-hsspi.c
@@ -351,8 +351,16 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
 		return PTR_ERR(clk);
 
 	rate = clk_get_rate(clk);
-	if (!rate)
-		return -EINVAL;
+	if (!rate) {
+		struct clk *pll_clk = devm_clk_get(dev, "pll");
+
+		if (IS_ERR(pll_clk))
+			return PTR_ERR(pll_clk);
+
+		rate = clk_get_rate(pll_clk);
+		if (!rate)
+			return -EINVAL;
+	}
 
 	ret = clk_prepare_enable(clk);
 	if (ret)
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V2 2/3] dt-bindings: spi: document bcm63xx HS SPI devicetree bindings

[Jonas Gorski]

Add documentation for the bindings of the high speed SPI controller found
on newer bcm63xx SoCs.

Signed-off-by: Jonas Gorski <jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
Changes v1 -> v2
* made the pll clock required
* added "High speed" (HS) to the first line

 .../devicetree/bindings/spi/spi-bcm63xx-hsspi.txt  | 33 ++++++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt

diff --git a/Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt b/Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt
new file mode 100644
index 000000000000..37b29ee13860
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt
@@ -0,0 +1,33 @@
+Binding for Broadcom BCM6328 High Speed SPI controller
+
+Required properties:
+- compatible: must contain of "brcm,bcm6328-hsspi".
+- reg: Base address and size of the controllers memory area.
+- interrupts: Interrupt for the SPI block.
+- clocks: phandles of the SPI clock and the PLL clock.
+- clock-names: must be "hsspi", "pll".
+- #address-cells: <1>, as required by generic SPI binding.
+- #size-cells: <0>, also as required by generic SPI binding.
+
+Optional properties:
+- num-cs: some controllers have less than 8 cs signals. Defaults to 8
+  if absent.
+
+Child nodes as per the generic SPI binding.
+
+Example:
+
+	spi@10001000 {
+		compatible = "brcm,bcm6328-hsspi";
+		reg = <0x10001000 0x600>;
+
+		interrupts = <29>;
+
+		clocks = <&clkctl 9>, <&hsspi_pll>;
+		clock-names = "hsspi", "pll";
+
+		num-cs = <2>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V2 3/3] spi/bcm63xx-hsspi: allow for probing through devicetree

[Jonas Gorski]

Add required binding support to probe through device tree.

Signed-off-by: Jonas Gorski <jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Acked-by: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
Changes v1 -> v2:
 * do everything except the bus_num assignment regardless of of_node
   being populated
 * Added Florian's Ack

 drivers/spi/spi-bcm63xx-hsspi.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c
index 79096d17ebde..5514cd02e93a 100644
--- a/drivers/spi/spi-bcm63xx-hsspi.c
+++ b/drivers/spi/spi-bcm63xx-hsspi.c
@@ -19,6 +19,7 @@
 #include <linux/interrupt.h>
 #include <linux/spi/spi.h>
 #include <linux/mutex.h>
+#include <linux/of.h>
 
 #define HSSPI_GLOBAL_CTRL_REG			0x0
 #define GLOBAL_CTRL_CS_POLARITY_SHIFT		0
@@ -91,6 +92,7 @@
 
 #define HSSPI_MAX_SYNC_CLOCK			30000000
 
+#define HSSPI_SPI_MAX_CS			8
 #define HSSPI_BUS_NUM				1 /* 0 is legacy SPI */
 
 struct bcm63xx_hsspi {
@@ -332,7 +334,7 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct clk *clk;
 	int irq, ret;
-	u32 reg, rate;
+	u32 reg, rate, num_cs = HSSPI_SPI_MAX_CS;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
@@ -382,8 +384,17 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
 	mutex_init(&bs->bus_mutex);
 	init_completion(&bs->done);
 
-	master->bus_num = HSSPI_BUS_NUM;
-	master->num_chipselect = 8;
+	master->dev.of_node = dev->of_node;
+	if (!dev->of_node)
+		master->bus_num = HSSPI_BUS_NUM;
+
+	of_property_read_u32(dev->of_node, "num-cs", &num_cs);
+	if (num_cs > 8) {
+		dev_warn(dev, "unsupported number of cs (%i), reducing to 8\n",
+			 num_cs);
+		num_cs = HSSPI_SPI_MAX_CS;
+	}
+	master->num_chipselect = num_cs;
 	master->setup = bcm63xx_hsspi_setup;
 	master->transfer_one_message = bcm63xx_hsspi_transfer_one;
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH |
@@ -469,10 +480,16 @@ static int bcm63xx_hsspi_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(bcm63xx_hsspi_pm_ops, bcm63xx_hsspi_suspend,
 			 bcm63xx_hsspi_resume);
 
+static const struct of_device_id bcm63xx_hsspi_of_match[] = {
+	{ .compatible = "brcm,bcm6328-hsspi", },
+	{ },
+};
+
 static struct platform_driver bcm63xx_hsspi_driver = {
 	.driver = {
 		.name	= "bcm63xx-hsspi",
 		.pm	= &bcm63xx_hsspi_pm_ops,
+		.of_match_table = bcm63xx_hsspi_of_match,
 	},
 	.probe		= bcm63xx_hsspi_probe,
 	.remove		= bcm63xx_hsspi_remove,
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH V2 2/3] dt-bindings: spi: document bcm63xx HS SPI devicetree bindings

[Rob Herring]

On Wed, Mar 01, 2017 at 10:08:13AM +0100, Jonas Gorski wrote:
> Add documentation for the bindings of the high speed SPI controller found
> on newer bcm63xx SoCs.
> 
> Signed-off-by: Jonas Gorski <jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
> Changes v1 -> v2
> * made the pll clock required
> * added "High speed" (HS) to the first line
> 
>  .../devicetree/bindings/spi/spi-bcm63xx-hsspi.txt  | 33 ++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Applied "spi/bcm63xx-hsspi: allow for probing through devicetree" to the spi tree

[Mark Brown]

The patch

   spi/bcm63xx-hsspi: allow for probing through devicetree

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 7ab2463550e2a3a5b97dfa82e5bf8038b986f007 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date: Wed, 1 Mar 2017 10:08:14 +0100
Subject: [PATCH] spi/bcm63xx-hsspi: allow for probing through devicetree

Add required binding support to probe through device tree.

Signed-off-by: Jonas Gorski <jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Acked-by: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/spi/spi-bcm63xx-hsspi.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c
index 79096d17ebde..5514cd02e93a 100644
--- a/drivers/spi/spi-bcm63xx-hsspi.c
+++ b/drivers/spi/spi-bcm63xx-hsspi.c
@@ -19,6 +19,7 @@
 #include <linux/interrupt.h>
 #include <linux/spi/spi.h>
 #include <linux/mutex.h>
+#include <linux/of.h>
 
 #define HSSPI_GLOBAL_CTRL_REG			0x0
 #define GLOBAL_CTRL_CS_POLARITY_SHIFT		0
@@ -91,6 +92,7 @@
 
 #define HSSPI_MAX_SYNC_CLOCK			30000000
 
+#define HSSPI_SPI_MAX_CS			8
 #define HSSPI_BUS_NUM				1 /* 0 is legacy SPI */
 
 struct bcm63xx_hsspi {
@@ -332,7 +334,7 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct clk *clk;
 	int irq, ret;
-	u32 reg, rate;
+	u32 reg, rate, num_cs = HSSPI_SPI_MAX_CS;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
@@ -382,8 +384,17 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
 	mutex_init(&bs->bus_mutex);
 	init_completion(&bs->done);
 
-	master->bus_num = HSSPI_BUS_NUM;
-	master->num_chipselect = 8;
+	master->dev.of_node = dev->of_node;
+	if (!dev->of_node)
+		master->bus_num = HSSPI_BUS_NUM;
+
+	of_property_read_u32(dev->of_node, "num-cs", &num_cs);
+	if (num_cs > 8) {
+		dev_warn(dev, "unsupported number of cs (%i), reducing to 8\n",
+			 num_cs);
+		num_cs = HSSPI_SPI_MAX_CS;
+	}
+	master->num_chipselect = num_cs;
 	master->setup = bcm63xx_hsspi_setup;
 	master->transfer_one_message = bcm63xx_hsspi_transfer_one;
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH |
@@ -469,10 +480,16 @@ static int bcm63xx_hsspi_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(bcm63xx_hsspi_pm_ops, bcm63xx_hsspi_suspend,
 			 bcm63xx_hsspi_resume);
 
+static const struct of_device_id bcm63xx_hsspi_of_match[] = {
+	{ .compatible = "brcm,bcm6328-hsspi", },
+	{ },
+};
+
 static struct platform_driver bcm63xx_hsspi_driver = {
 	.driver = {
 		.name	= "bcm63xx-hsspi",
 		.pm	= &bcm63xx_hsspi_pm_ops,
+		.of_match_table = bcm63xx_hsspi_of_match,
 	},
 	.probe		= bcm63xx_hsspi_probe,
 	.remove		= bcm63xx_hsspi_remove,
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Applied "spi/bcm63xx-hsspi: allow for probing through devicetree" to the spi tree

[Mark Brown]

The patch

   spi/bcm63xx-hsspi: allow for probing through devicetree

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 7ab2463550e2a3a5b97dfa82e5bf8038b986f007 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date: Wed, 1 Mar 2017 10:08:14 +0100
Subject: [PATCH] spi/bcm63xx-hsspi: allow for probing through devicetree

Add required binding support to probe through device tree.

Signed-off-by: Jonas Gorski <jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Acked-by: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/spi/spi-bcm63xx-hsspi.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c
index 79096d17ebde..5514cd02e93a 100644
--- a/drivers/spi/spi-bcm63xx-hsspi.c
+++ b/drivers/spi/spi-bcm63xx-hsspi.c
@@ -19,6 +19,7 @@
 #include <linux/interrupt.h>
 #include <linux/spi/spi.h>
 #include <linux/mutex.h>
+#include <linux/of.h>
 
 #define HSSPI_GLOBAL_CTRL_REG			0x0
 #define GLOBAL_CTRL_CS_POLARITY_SHIFT		0
@@ -91,6 +92,7 @@
 
 #define HSSPI_MAX_SYNC_CLOCK			30000000
 
+#define HSSPI_SPI_MAX_CS			8
 #define HSSPI_BUS_NUM				1 /* 0 is legacy SPI */
 
 struct bcm63xx_hsspi {
@@ -332,7 +334,7 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct clk *clk;
 	int irq, ret;
-	u32 reg, rate;
+	u32 reg, rate, num_cs = HSSPI_SPI_MAX_CS;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
@@ -382,8 +384,17 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
 	mutex_init(&bs->bus_mutex);
 	init_completion(&bs->done);
 
-	master->bus_num = HSSPI_BUS_NUM;
-	master->num_chipselect = 8;
+	master->dev.of_node = dev->of_node;
+	if (!dev->of_node)
+		master->bus_num = HSSPI_BUS_NUM;
+
+	of_property_read_u32(dev->of_node, "num-cs", &num_cs);
+	if (num_cs > 8) {
+		dev_warn(dev, "unsupported number of cs (%i), reducing to 8\n",
+			 num_cs);
+		num_cs = HSSPI_SPI_MAX_CS;
+	}
+	master->num_chipselect = num_cs;
 	master->setup = bcm63xx_hsspi_setup;
 	master->transfer_one_message = bcm63xx_hsspi_transfer_one;
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH |
@@ -469,10 +480,16 @@ static int bcm63xx_hsspi_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(bcm63xx_hsspi_pm_ops, bcm63xx_hsspi_suspend,
 			 bcm63xx_hsspi_resume);
 
+static const struct of_device_id bcm63xx_hsspi_of_match[] = {
+	{ .compatible = "brcm,bcm6328-hsspi", },
+	{ },
+};
+
 static struct platform_driver bcm63xx_hsspi_driver = {
 	.driver = {
 		.name	= "bcm63xx-hsspi",
 		.pm	= &bcm63xx_hsspi_pm_ops,
+		.of_match_table = bcm63xx_hsspi_of_match,
 	},
 	.probe		= bcm63xx_hsspi_probe,
 	.remove		= bcm63xx_hsspi_remove,
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Applied "spi/bcm63xx-hsspi: document bcm63xx HS SPI devicetree bindings" to the spi tree

[Mark Brown]

The patch

   spi/bcm63xx-hsspi: document bcm63xx HS SPI devicetree bindings

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 8c0951afd8a7585a4281980b9a21dcc8a419cad9 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date: Wed, 1 Mar 2017 10:08:13 +0100
Subject: [PATCH] spi/bcm63xx-hsspi: document bcm63xx HS SPI devicetree
 bindings

Add documentation for the bindings of the high speed SPI controller found
on newer bcm63xx SoCs.

Signed-off-by: Jonas Gorski <jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 .../devicetree/bindings/spi/spi-bcm63xx-hsspi.txt  | 33 ++++++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt

diff --git a/Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt b/Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt
new file mode 100644
index 000000000000..37b29ee13860
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt
@@ -0,0 +1,33 @@
+Binding for Broadcom BCM6328 High Speed SPI controller
+
+Required properties:
+- compatible: must contain of "brcm,bcm6328-hsspi".
+- reg: Base address and size of the controllers memory area.
+- interrupts: Interrupt for the SPI block.
+- clocks: phandles of the SPI clock and the PLL clock.
+- clock-names: must be "hsspi", "pll".
+- #address-cells: <1>, as required by generic SPI binding.
+- #size-cells: <0>, also as required by generic SPI binding.
+
+Optional properties:
+- num-cs: some controllers have less than 8 cs signals. Defaults to 8
+  if absent.
+
+Child nodes as per the generic SPI binding.
+
+Example:
+
+	spi@10001000 {
+		compatible = "brcm,bcm6328-hsspi";
+		reg = <0x10001000 0x600>;
+
+		interrupts = <29>;
+
+		clocks = <&clkctl 9>, <&hsspi_pll>;
+		clock-names = "hsspi", "pll";
+
+		num-cs = <2>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Applied "spi/bcm63xx-hsspi: document bcm63xx HS SPI devicetree bindings" to the spi tree

[Mark Brown]

The patch

   spi/bcm63xx-hsspi: document bcm63xx HS SPI devicetree bindings

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 8c0951afd8a7585a4281980b9a21dcc8a419cad9 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date: Wed, 1 Mar 2017 10:08:13 +0100
Subject: [PATCH] spi/bcm63xx-hsspi: document bcm63xx HS SPI devicetree
 bindings

Add documentation for the bindings of the high speed SPI controller found
on newer bcm63xx SoCs.

Signed-off-by: Jonas Gorski <jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 .../devicetree/bindings/spi/spi-bcm63xx-hsspi.txt  | 33 ++++++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt

diff --git a/Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt b/Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt
new file mode 100644
index 000000000000..37b29ee13860
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt
@@ -0,0 +1,33 @@
+Binding for Broadcom BCM6328 High Speed SPI controller
+
+Required properties:
+- compatible: must contain of "brcm,bcm6328-hsspi".
+- reg: Base address and size of the controllers memory area.
+- interrupts: Interrupt for the SPI block.
+- clocks: phandles of the SPI clock and the PLL clock.
+- clock-names: must be "hsspi", "pll".
+- #address-cells: <1>, as required by generic SPI binding.
+- #size-cells: <0>, also as required by generic SPI binding.
+
+Optional properties:
+- num-cs: some controllers have less than 8 cs signals. Defaults to 8
+  if absent.
+
+Child nodes as per the generic SPI binding.
+
+Example:
+
+	spi@10001000 {
+		compatible = "brcm,bcm6328-hsspi";
+		reg = <0x10001000 0x600>;
+
+		interrupts = <29>;
+
+		clocks = <&clkctl 9>, <&hsspi_pll>;
+		clock-names = "hsspi", "pll";
+
+		num-cs = <2>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html