From: Arushi Singhal <arushisinghal19971997@gmail.com>
To: sudipm.mukherjee@gmail.com
Cc: teddy.wang@siliconmotion.com, outreachy-kernel@googlegroups.com,
gregkh@linuxfoundation.org, linux-fbdev@vger.kernel.org,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
Arushi Singhal <arushisinghal19971997@gmail.com>
Subject: [PATCH 3/3] staging: sm750fb: Alignment should match open parenthesis
Date: Sun, 5 Mar 2017 16:54:50 +0530 [thread overview]
Message-ID: <20170305112450.9066-4-arushisinghal19971997@gmail.com> (raw)
In-Reply-To: <20170305112450.9066-1-arushisinghal19971997@gmail.com>
Fix checkpatch issues: "CHECK: Alignment should match open parenthesis".
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
---
drivers/staging/sm750fb/ddk750_mode.c | 69 +++++++++++++++++------------------
1 file changed, 34 insertions(+), 35 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 45af806c8d55..77dfac3ba041 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -28,9 +28,9 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam,
poke32(CRT_AUTO_CENTERING_TL, 0);
poke32(CRT_AUTO_CENTERING_BR,
- (((y - 1) << CRT_AUTO_CENTERING_BR_BOTTOM_SHIFT) &
- CRT_AUTO_CENTERING_BR_BOTTOM_MASK) |
- ((x - 1) & CRT_AUTO_CENTERING_BR_RIGHT_MASK));
+ (((y - 1) << CRT_AUTO_CENTERING_BR_BOTTOM_SHIFT) &
+ CRT_AUTO_CENTERING_BR_BOTTOM_MASK) |
+ ((x - 1) & CRT_AUTO_CENTERING_BR_RIGHT_MASK));
/*
* Assume common fields in dispControl have been properly set before
@@ -72,8 +72,7 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam,
}
/* only timing related registers will be programed */
-static int programModeRegisters(mode_parameter_t *pModeParam,
- struct pll_value *pll)
+static int programModeRegisters(mode_parameter_t *pModeParam, struct pll_value *pll)
{
int ret = 0;
int cnt = 0;
@@ -83,32 +82,32 @@ static int programModeRegisters(mode_parameter_t *pModeParam,
/* programe secondary pixel clock */
poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
poke32(CRT_HORIZONTAL_TOTAL,
- (((pModeParam->horizontal_total - 1) <<
- CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
- CRT_HORIZONTAL_TOTAL_TOTAL_MASK) |
- ((pModeParam->horizontal_display_end - 1) &
- CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK));
+ (((pModeParam->horizontal_total - 1) <<
+ CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
+ CRT_HORIZONTAL_TOTAL_TOTAL_MASK) |
+ ((pModeParam->horizontal_display_end - 1) &
+ CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK));
poke32(CRT_HORIZONTAL_SYNC,
- ((pModeParam->horizontal_sync_width <<
- CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
- CRT_HORIZONTAL_SYNC_WIDTH_MASK) |
- ((pModeParam->horizontal_sync_start - 1) &
- CRT_HORIZONTAL_SYNC_START_MASK));
+ ((pModeParam->horizontal_sync_width <<
+ CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
+ CRT_HORIZONTAL_SYNC_WIDTH_MASK) |
+ ((pModeParam->horizontal_sync_start - 1) &
+ CRT_HORIZONTAL_SYNC_START_MASK));
poke32(CRT_VERTICAL_TOTAL,
- (((pModeParam->vertical_total - 1) <<
- CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
- CRT_VERTICAL_TOTAL_TOTAL_MASK) |
- ((pModeParam->vertical_display_end - 1) &
- CRT_VERTICAL_TOTAL_DISPLAY_END_MASK));
+ (((pModeParam->vertical_total - 1) <<
+ CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
+ CRT_VERTICAL_TOTAL_TOTAL_MASK) |
+ ((pModeParam->vertical_display_end - 1) &
+ CRT_VERTICAL_TOTAL_DISPLAY_END_MASK));
poke32(CRT_VERTICAL_SYNC,
- ((pModeParam->vertical_sync_height <<
- CRT_VERTICAL_SYNC_HEIGHT_SHIFT) &
- CRT_VERTICAL_SYNC_HEIGHT_MASK) |
- ((pModeParam->vertical_sync_start - 1) &
- CRT_VERTICAL_SYNC_START_MASK));
+ ((pModeParam->vertical_sync_height <<
+ CRT_VERTICAL_SYNC_HEIGHT_SHIFT) &
+ CRT_VERTICAL_SYNC_HEIGHT_MASK) |
+ ((pModeParam->vertical_sync_start - 1) &
+ CRT_VERTICAL_SYNC_START_MASK));
tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
if (pModeParam->vertical_sync_polarity)
@@ -147,18 +146,18 @@ static int programModeRegisters(mode_parameter_t *pModeParam,
PANEL_HORIZONTAL_SYNC_START_MASK));
poke32(PANEL_VERTICAL_TOTAL,
- (((pModeParam->vertical_total - 1) <<
- PANEL_VERTICAL_TOTAL_TOTAL_SHIFT) &
- PANEL_VERTICAL_TOTAL_TOTAL_MASK) |
- ((pModeParam->vertical_display_end - 1) &
- PANEL_VERTICAL_TOTAL_DISPLAY_END_MASK));
+ (((pModeParam->vertical_total - 1) <<
+ PANEL_VERTICAL_TOTAL_TOTAL_SHIFT) &
+ PANEL_VERTICAL_TOTAL_TOTAL_MASK) |
+ ((pModeParam->vertical_display_end - 1) &
+ ANEL_VERTICAL_TOTAL_DISPLAY_END_MASK));
poke32(PANEL_VERTICAL_SYNC,
- ((pModeParam->vertical_sync_height <<
- PANEL_VERTICAL_SYNC_HEIGHT_SHIFT) &
- PANEL_VERTICAL_SYNC_HEIGHT_MASK) |
- ((pModeParam->vertical_sync_start - 1) &
- PANEL_VERTICAL_SYNC_START_MASK));
+ ((pModeParam->vertical_sync_height <<
+ PANEL_VERTICAL_SYNC_HEIGHT_SHIFT) &
+ PANEL_VERTICAL_SYNC_HEIGHT_MASK) |
+ ((pModeParam->vertical_sync_start - 1) &
+ PANEL_VERTICAL_SYNC_START_MASK));
tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
if (pModeParam->vertical_sync_polarity)
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Arushi Singhal <arushisinghal19971997@gmail.com>
To: sudipm.mukherjee@gmail.com
Cc: teddy.wang@siliconmotion.com, outreachy-kernel@googlegroups.com,
gregkh@linuxfoundation.org, linux-fbdev@vger.kernel.org,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
Arushi Singhal <arushisinghal19971997@gmail.com>
Subject: [PATCH 3/3] staging: sm750fb: Alignment should match open parenthesis
Date: Sun, 05 Mar 2017 11:36:50 +0000 [thread overview]
Message-ID: <20170305112450.9066-4-arushisinghal19971997@gmail.com> (raw)
In-Reply-To: <20170305112450.9066-1-arushisinghal19971997@gmail.com>
Fix checkpatch issues: "CHECK: Alignment should match open parenthesis".
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
---
drivers/staging/sm750fb/ddk750_mode.c | 69 +++++++++++++++++------------------
1 file changed, 34 insertions(+), 35 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 45af806c8d55..77dfac3ba041 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -28,9 +28,9 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam,
poke32(CRT_AUTO_CENTERING_TL, 0);
poke32(CRT_AUTO_CENTERING_BR,
- (((y - 1) << CRT_AUTO_CENTERING_BR_BOTTOM_SHIFT) &
- CRT_AUTO_CENTERING_BR_BOTTOM_MASK) |
- ((x - 1) & CRT_AUTO_CENTERING_BR_RIGHT_MASK));
+ (((y - 1) << CRT_AUTO_CENTERING_BR_BOTTOM_SHIFT) &
+ CRT_AUTO_CENTERING_BR_BOTTOM_MASK) |
+ ((x - 1) & CRT_AUTO_CENTERING_BR_RIGHT_MASK));
/*
* Assume common fields in dispControl have been properly set before
@@ -72,8 +72,7 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam,
}
/* only timing related registers will be programed */
-static int programModeRegisters(mode_parameter_t *pModeParam,
- struct pll_value *pll)
+static int programModeRegisters(mode_parameter_t *pModeParam, struct pll_value *pll)
{
int ret = 0;
int cnt = 0;
@@ -83,32 +82,32 @@ static int programModeRegisters(mode_parameter_t *pModeParam,
/* programe secondary pixel clock */
poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
poke32(CRT_HORIZONTAL_TOTAL,
- (((pModeParam->horizontal_total - 1) <<
- CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
- CRT_HORIZONTAL_TOTAL_TOTAL_MASK) |
- ((pModeParam->horizontal_display_end - 1) &
- CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK));
+ (((pModeParam->horizontal_total - 1) <<
+ CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
+ CRT_HORIZONTAL_TOTAL_TOTAL_MASK) |
+ ((pModeParam->horizontal_display_end - 1) &
+ CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK));
poke32(CRT_HORIZONTAL_SYNC,
- ((pModeParam->horizontal_sync_width <<
- CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
- CRT_HORIZONTAL_SYNC_WIDTH_MASK) |
- ((pModeParam->horizontal_sync_start - 1) &
- CRT_HORIZONTAL_SYNC_START_MASK));
+ ((pModeParam->horizontal_sync_width <<
+ CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
+ CRT_HORIZONTAL_SYNC_WIDTH_MASK) |
+ ((pModeParam->horizontal_sync_start - 1) &
+ CRT_HORIZONTAL_SYNC_START_MASK));
poke32(CRT_VERTICAL_TOTAL,
- (((pModeParam->vertical_total - 1) <<
- CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
- CRT_VERTICAL_TOTAL_TOTAL_MASK) |
- ((pModeParam->vertical_display_end - 1) &
- CRT_VERTICAL_TOTAL_DISPLAY_END_MASK));
+ (((pModeParam->vertical_total - 1) <<
+ CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
+ CRT_VERTICAL_TOTAL_TOTAL_MASK) |
+ ((pModeParam->vertical_display_end - 1) &
+ CRT_VERTICAL_TOTAL_DISPLAY_END_MASK));
poke32(CRT_VERTICAL_SYNC,
- ((pModeParam->vertical_sync_height <<
- CRT_VERTICAL_SYNC_HEIGHT_SHIFT) &
- CRT_VERTICAL_SYNC_HEIGHT_MASK) |
- ((pModeParam->vertical_sync_start - 1) &
- CRT_VERTICAL_SYNC_START_MASK));
+ ((pModeParam->vertical_sync_height <<
+ CRT_VERTICAL_SYNC_HEIGHT_SHIFT) &
+ CRT_VERTICAL_SYNC_HEIGHT_MASK) |
+ ((pModeParam->vertical_sync_start - 1) &
+ CRT_VERTICAL_SYNC_START_MASK));
tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
if (pModeParam->vertical_sync_polarity)
@@ -147,18 +146,18 @@ static int programModeRegisters(mode_parameter_t *pModeParam,
PANEL_HORIZONTAL_SYNC_START_MASK));
poke32(PANEL_VERTICAL_TOTAL,
- (((pModeParam->vertical_total - 1) <<
- PANEL_VERTICAL_TOTAL_TOTAL_SHIFT) &
- PANEL_VERTICAL_TOTAL_TOTAL_MASK) |
- ((pModeParam->vertical_display_end - 1) &
- PANEL_VERTICAL_TOTAL_DISPLAY_END_MASK));
+ (((pModeParam->vertical_total - 1) <<
+ PANEL_VERTICAL_TOTAL_TOTAL_SHIFT) &
+ PANEL_VERTICAL_TOTAL_TOTAL_MASK) |
+ ((pModeParam->vertical_display_end - 1) &
+ ANEL_VERTICAL_TOTAL_DISPLAY_END_MASK));
poke32(PANEL_VERTICAL_SYNC,
- ((pModeParam->vertical_sync_height <<
- PANEL_VERTICAL_SYNC_HEIGHT_SHIFT) &
- PANEL_VERTICAL_SYNC_HEIGHT_MASK) |
- ((pModeParam->vertical_sync_start - 1) &
- PANEL_VERTICAL_SYNC_START_MASK));
+ ((pModeParam->vertical_sync_height <<
+ PANEL_VERTICAL_SYNC_HEIGHT_SHIFT) &
+ PANEL_VERTICAL_SYNC_HEIGHT_MASK) |
+ ((pModeParam->vertical_sync_start - 1) &
+ PANEL_VERTICAL_SYNC_START_MASK));
tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
if (pModeParam->vertical_sync_polarity)
--
2.11.0
next prev parent reply other threads:[~2017-03-05 11:25 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-05 11:24 [PATCH 0/3] multiple checkpatch issues Arushi Singhal
2017-03-05 11:36 ` Arushi Singhal
2017-03-05 11:24 ` [PATCH 1/3] staging: sm750fb: fixes add blank line after function/struct/union/enum declarations Arushi Singhal
2017-03-05 11:36 ` Arushi Singhal
2017-03-06 19:34 ` Geert Uytterhoeven
2017-03-06 19:34 ` Geert Uytterhoeven
2017-03-07 17:39 ` Dan Carpenter
2017-03-07 17:39 ` Dan Carpenter
2017-03-05 11:24 ` [PATCH 2/3] staging: sm750fb: function prototype argument should have an identifier name Arushi Singhal
2017-03-05 11:36 ` Arushi Singhal
2017-03-05 11:24 ` Arushi Singhal [this message]
2017-03-05 11:36 ` [PATCH 3/3] staging: sm750fb: Alignment should match open parenthesis Arushi Singhal
2017-03-07 17:44 ` Dan Carpenter
2017-03-07 17:44 ` Dan Carpenter
2017-03-05 13:39 ` [PATCH 0/3] multiple checkpatch issues Joe Perches
2017-03-05 13:39 ` Joe Perches
2017-03-10 21:56 Arushi Singhal
2017-03-10 21:57 ` Arushi Singhal
2017-03-10 21:56 ` [PATCH 1/3] staging: sm750fb: function prototype argument should have an identifier name Arushi Singhal
2017-03-10 21:57 ` Arushi Singhal
2017-03-10 21:56 ` [PATCH 2/3] staging: sm750fb: fixes add blank line after function/struct/union/enum declarations Arushi Singhal
2017-03-10 21:57 ` Arushi Singhal
2017-03-10 21:56 ` [PATCH 3/3] staging: sm750fb: Alignment should match open parenthesis Arushi Singhal
2017-03-10 21:58 ` Arushi Singhal
2017-03-10 22:05 ` [PATCH 0/3] multiple checkpatch issues Greg KH
2017-03-10 22:05 ` Greg KH
2017-03-11 3:24 [PATCH 0/3] staging: sm750fb: " Arushi Singhal
2017-03-11 3:36 ` [PATCH 3/3] staging: sm750fb: Alignment should match open parenthesis Arushi Singhal
2017-03-11 3:24 ` Arushi Singhal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170305112450.9066-4-arushisinghal19971997@gmail.com \
--to=arushisinghal19971997@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=outreachy-kernel@googlegroups.com \
--cc=sudipm.mukherjee@gmail.com \
--cc=teddy.wang@siliconmotion.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.