All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v3] Input: pwm-beeper: support customized freq for SND_BELL
@ 2017-03-01  5:37 Heiko Schocher
  2017-03-07 18:44 ` Dmitry Torokhov
  0 siblings, 1 reply; 2+ messages in thread
From: Heiko Schocher @ 2017-03-01  5:37 UTC (permalink / raw)
  To: linux-input
  Cc: Guan Ben, Mark Jonas, Heiko Schocher, devicetree, Thierry Reding,
	linux-kernel, Boris Brezillon, Rob Herring, Dmitry Torokhov,
	Manfred Schlaegl, Mark Rutland

From: Guan Ben <ben.guan@cn.bosch.com>

extend the pwm-beeper driver to support customized frequency
for SND_BELL from device tree.

Signed-off-by: Guan Ben <ben.guan@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
[hs@denx.de: adapted to 4.10-rc7]
Signed-off-by: Heiko Schocher <hs@denx.de>

Acked-by: Rob Herring <robh@kernel.org>
---

Changes in v3:
- add comment from David Lechner:
  - readd the switch statement, instead using if / then
  - remove check IS_ENABLED(CONFIG_OF)
  - remove not used node variable
  - change warning string from "Failed to read beeper-hz" to
    "'beeper-hz' not specified"
  - remove function pwm_beeper_init_bell_frequency() as it is
    to simple.
  - checked that device_property_read_u32() does not modify the
    bell_frequency, if the property "beeper_hz" is not defined.
- add comment from Rob Herring:
  - add Acked-by from Rob Herring
    Rob also mentioned to remove the IS_ENABLED(CONFIG_OF) check
    and node variable is unused.

Changes in v2:
- add comment from Rob Herring:
  rename property name "bell-frequency" to "beeper-hz"
- add comment from Dmitry Torokhov:
  use device_property_read_u32() instead of of_property_read_u32()
- rebased against c470abd4fde40ea6a0846a2beab642a578c0b8cd
  Linux 4.10

 Documentation/devicetree/bindings/input/pwm-beeper.txt |  3 +++
 drivers/input/misc/pwm-beeper.c                        | 11 ++++++++++-
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt
index be332ae..4e4e128 100644
--- a/Documentation/devicetree/bindings/input/pwm-beeper.txt
+++ b/Documentation/devicetree/bindings/input/pwm-beeper.txt
@@ -5,3 +5,6 @@ Registers a PWM device as beeper.
 Required properties:
 - compatible: should be "pwm-beeper"
 - pwms: phandle to the physical PWM device
+
+optional properties:
+- beeper-hz:  bell frequency in Hz
diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c
index 5f9655d..f2fcd50 100644
--- a/drivers/input/misc/pwm-beeper.c
+++ b/drivers/input/misc/pwm-beeper.c
@@ -27,6 +27,7 @@ struct pwm_beeper {
 	struct pwm_device *pwm;
 	struct work_struct work;
 	unsigned long period;
+	unsigned int bell_frequency;
 };
 
 #define HZ_TO_NANOSECONDS(x) (1000000000UL/(x))
@@ -60,7 +61,7 @@ static int pwm_beeper_event(struct input_dev *input,
 
 	switch (code) {
 	case SND_BELL:
-		value = value ? 1000 : 0;
+		value = value ? beeper->bell_frequency : 0;
 		break;
 	case SND_TONE:
 		break;
@@ -97,6 +98,7 @@ static int pwm_beeper_probe(struct platform_device *pdev)
 {
 	unsigned long pwm_id = (unsigned long)dev_get_platdata(&pdev->dev);
 	struct pwm_beeper *beeper;
+	unsigned int bell_frequency = 1000;
 	int error;
 
 	beeper = kzalloc(sizeof(*beeper), GFP_KERNEL);
@@ -122,6 +124,13 @@ static int pwm_beeper_probe(struct platform_device *pdev)
 	pwm_apply_args(beeper->pwm);
 
 	INIT_WORK(&beeper->work, pwm_beeper_work);
+	error = device_property_read_u32(&pdev->dev, "beeper-hz",
+				       &bell_frequency);
+	if (error < 0)
+		dev_dbg(&pdev->dev, "'beeper-hz' not specified, using default: %u Hz\n",
+			bell_frequency);
+
+	beeper->bell_frequency = bell_frequency;
 
 	beeper->input = input_allocate_device();
 	if (!beeper->input) {
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 2+ messages in thread
* Re: [PATCH v3] Input: pwm-beeper: support customized freq for SND_BELL
  2017-03-01  5:37 [PATCH v3] Input: pwm-beeper: support customized freq for SND_BELL Heiko Schocher
@ 2017-03-07 18:44 ` Dmitry Torokhov
  0 siblings, 0 replies; 2+ messages in thread
From: Dmitry Torokhov @ 2017-03-07 18:44 UTC (permalink / raw)
  To: Heiko Schocher
  Cc: linux-input, Guan Ben, Mark Jonas, devicetree, Thierry Reding,
	linux-kernel, Boris Brezillon, Rob Herring, Manfred Schlaegl,
	Mark Rutland

On Wed, Mar 01, 2017 at 06:37:22AM +0100, Heiko Schocher wrote:
> From: Guan Ben <ben.guan@cn.bosch.com>
> 
> extend the pwm-beeper driver to support customized frequency
> for SND_BELL from device tree.
> 
> Signed-off-by: Guan Ben <ben.guan@cn.bosch.com>
> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
> [hs@denx.de: adapted to 4.10-rc7]
> Signed-off-by: Heiko Schocher <hs@denx.de>
> 
> Acked-by: Rob Herring <robh@kernel.org>

Reconciled with the latest version and applied, thank you.

> ---
> 
> Changes in v3:
> - add comment from David Lechner:
>   - readd the switch statement, instead using if / then
>   - remove check IS_ENABLED(CONFIG_OF)
>   - remove not used node variable
>   - change warning string from "Failed to read beeper-hz" to
>     "'beeper-hz' not specified"
>   - remove function pwm_beeper_init_bell_frequency() as it is
>     to simple.
>   - checked that device_property_read_u32() does not modify the
>     bell_frequency, if the property "beeper_hz" is not defined.
> - add comment from Rob Herring:
>   - add Acked-by from Rob Herring
>     Rob also mentioned to remove the IS_ENABLED(CONFIG_OF) check
>     and node variable is unused.
> 
> Changes in v2:
> - add comment from Rob Herring:
>   rename property name "bell-frequency" to "beeper-hz"
> - add comment from Dmitry Torokhov:
>   use device_property_read_u32() instead of of_property_read_u32()
> - rebased against c470abd4fde40ea6a0846a2beab642a578c0b8cd
>   Linux 4.10
> 
>  Documentation/devicetree/bindings/input/pwm-beeper.txt |  3 +++
>  drivers/input/misc/pwm-beeper.c                        | 11 ++++++++++-
>  2 files changed, 13 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt
> index be332ae..4e4e128 100644
> --- a/Documentation/devicetree/bindings/input/pwm-beeper.txt
> +++ b/Documentation/devicetree/bindings/input/pwm-beeper.txt
> @@ -5,3 +5,6 @@ Registers a PWM device as beeper.
>  Required properties:
>  - compatible: should be "pwm-beeper"
>  - pwms: phandle to the physical PWM device
> +
> +optional properties:
> +- beeper-hz:  bell frequency in Hz
> diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c
> index 5f9655d..f2fcd50 100644
> --- a/drivers/input/misc/pwm-beeper.c
> +++ b/drivers/input/misc/pwm-beeper.c
> @@ -27,6 +27,7 @@ struct pwm_beeper {
>  	struct pwm_device *pwm;
>  	struct work_struct work;
>  	unsigned long period;
> +	unsigned int bell_frequency;
>  };
>  
>  #define HZ_TO_NANOSECONDS(x) (1000000000UL/(x))
> @@ -60,7 +61,7 @@ static int pwm_beeper_event(struct input_dev *input,
>  
>  	switch (code) {
>  	case SND_BELL:
> -		value = value ? 1000 : 0;
> +		value = value ? beeper->bell_frequency : 0;
>  		break;
>  	case SND_TONE:
>  		break;
> @@ -97,6 +98,7 @@ static int pwm_beeper_probe(struct platform_device *pdev)
>  {
>  	unsigned long pwm_id = (unsigned long)dev_get_platdata(&pdev->dev);
>  	struct pwm_beeper *beeper;
> +	unsigned int bell_frequency = 1000;
>  	int error;
>  
>  	beeper = kzalloc(sizeof(*beeper), GFP_KERNEL);
> @@ -122,6 +124,13 @@ static int pwm_beeper_probe(struct platform_device *pdev)
>  	pwm_apply_args(beeper->pwm);
>  
>  	INIT_WORK(&beeper->work, pwm_beeper_work);
> +	error = device_property_read_u32(&pdev->dev, "beeper-hz",
> +				       &bell_frequency);
> +	if (error < 0)
> +		dev_dbg(&pdev->dev, "'beeper-hz' not specified, using default: %u Hz\n",
> +			bell_frequency);
> +
> +	beeper->bell_frequency = bell_frequency;
>  
>  	beeper->input = input_allocate_device();
>  	if (!beeper->input) {
> -- 
> 2.7.4
> 

-- 
Dmitry

^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-03-07 18:44 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-03-01  5:37 [PATCH v3] Input: pwm-beeper: support customized freq for SND_BELL Heiko Schocher
2017-03-07 18:44 ` Dmitry Torokhov

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.