* Re: [PATCH net-next 1/1 v2] net: rmnet_data: Initial implementation
2017-03-13 7:43 ` [PATCH net-next 1/1 v2] net: rmnet_data: Initial implementation Subash Abhinov Kasiviswanathan
@ 2017-03-13 8:54 ` Jiri Pirko
2017-03-13 22:01 ` Subash Abhinov Kasiviswanathan
2017-03-13 22:24 ` kbuild test robot
` (2 subsequent siblings)
3 siblings, 1 reply; 12+ messages in thread
From: Jiri Pirko @ 2017-03-13 8:54 UTC (permalink / raw)
To: Subash Abhinov Kasiviswanathan; +Cc: netdev, davem, fengguang.wu
Mon, Mar 13, 2017 at 08:43:09AM CET, subashab@codeaurora.org wrote:
>RmNet Data driver provides a transport agnostic MAP (multiplexing and
Why "data"? Why not just "rmnet"??
Btw, what is "RmNet". Google does not give me much. Is it some
priprietady Qualcomm thing? Is there some standard behind it?
>aggregation protocol) support in embedded and bridge modes. Module
>provides virtual network devices which can be attached to any IP-mode
>physical device. This will be used to provide all MAP functionality
>on future hardware in a single consistent location.
>
>Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
>---
> Documentation/networking/rmnet_data.txt | 82 +++
> include/uapi/linux/Kbuild | 1 +
> include/uapi/linux/if_arp.h | 1 +
> include/uapi/linux/if_ether.h | 4 +-
> include/uapi/linux/rmnet_data.h | 214 ++++++
> net/Kconfig | 1 +
> net/Makefile | 1 +
> net/rmnet_data/Kconfig | 21 +
> net/rmnet_data/Makefile | 14 +
> net/rmnet_data/rmnet_data_config.c | 1168 +++++++++++++++++++++++++++++++
> net/rmnet_data/rmnet_data_config.h | 107 +++
> net/rmnet_data/rmnet_data_handlers.c | 556 +++++++++++++++
> net/rmnet_data/rmnet_data_handlers.h | 24 +
> net/rmnet_data/rmnet_data_main.c | 60 ++
> net/rmnet_data/rmnet_data_private.h | 76 ++
> net/rmnet_data/rmnet_data_stats.c | 86 +++
> net/rmnet_data/rmnet_data_stats.h | 61 ++
> net/rmnet_data/rmnet_data_trace.h | 198 ++++++
> net/rmnet_data/rmnet_data_vnd.c | 460 ++++++++++++
> net/rmnet_data/rmnet_data_vnd.h | 34 +
> net/rmnet_data/rmnet_map.h | 100 +++
> net/rmnet_data/rmnet_map_command.c | 180 +++++
> net/rmnet_data/rmnet_map_data.c | 148 ++++
> 23 files changed, 3596 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/networking/rmnet_data.txt
> create mode 100644 include/uapi/linux/rmnet_data.h
> create mode 100644 net/rmnet_data/Kconfig
> create mode 100644 net/rmnet_data/Makefile
> create mode 100644 net/rmnet_data/rmnet_data_config.c
> create mode 100644 net/rmnet_data/rmnet_data_config.h
> create mode 100644 net/rmnet_data/rmnet_data_handlers.c
> create mode 100644 net/rmnet_data/rmnet_data_handlers.h
> create mode 100644 net/rmnet_data/rmnet_data_main.c
> create mode 100644 net/rmnet_data/rmnet_data_private.h
> create mode 100644 net/rmnet_data/rmnet_data_stats.c
> create mode 100644 net/rmnet_data/rmnet_data_stats.h
> create mode 100644 net/rmnet_data/rmnet_data_trace.h
> create mode 100644 net/rmnet_data/rmnet_data_vnd.c
> create mode 100644 net/rmnet_data/rmnet_data_vnd.h
> create mode 100644 net/rmnet_data/rmnet_map.h
> create mode 100644 net/rmnet_data/rmnet_map_command.c
> create mode 100644 net/rmnet_data/rmnet_map_data.c
>
>diff --git a/Documentation/networking/rmnet_data.txt b/Documentation/networking/rmnet_data.txt
>new file mode 100644
>index 0000000..ff6cce8
>--- /dev/null
>+++ b/Documentation/networking/rmnet_data.txt
>@@ -0,0 +1,82 @@
>+1. Introduction
>+
>+rmnet_data driver is used for supporting the Multiplexing and aggregation
>+Protocol (MAP). This protocol is used by all recent chipsets using Qualcomm
>+Technologies, Inc. modems.
>+
>+This driver can be used to register onto any physical network device in
>+IP mode. Physical transports include USB, HSIC, PCIe and IP accelerator.
>+
>+Multiplexing allows for creation of logical netdevices (rmnet_data devices) to
>+handle multiple private data networks (PDN) like a default internet, tethering,
>+multimedia messaging service (MMS) or IP media subsystem (IMS). Hardware sends
>+packets with MAP headers to rmnet_data. Based on the multiplexer id, rmnet_data
>+routes to the appropriate PDN after removing the MAP header.
>+
>+Aggregation is required to achieve high data rates. This involves hardware
>+sending aggregated bunch of MAP frames. rmnet_data driver will de-aggregate
>+these MAP frames and send them to appropriate PDN's.
>+
>+2. Packet format
>+
>+a. MAP packet (data / control)
>+
>+MAP header has the same endianness of the IP packet.
>+
>+Packet format -
>+
>+Bit 0 1 2-7 8 - 15 16 - 31
>+Function Command / Data Reserved Pad Multiplexer ID Payload length
>+Bit 32 - x
>+Function Raw Bytes
>+
>+Command (1)/ Data (0) bit value is to indicate if the packet is a MAP command
>+or data packet. Control packet is used for transport level flow control. Data
>+packets are standard IP packets.
>+
>+Reserved bits are usually zeroed out and to be ignored by receiver.
>+
>+Padding is number of bytes to be added for 4 byte alignment if required by
>+hardware.
>+
>+Multiplexer ID is to indicate the PDN on which data has to be sent.
>+
>+Payload length includes the padding length but does not include MAP header
>+length.
>+
>+b. MAP packet (command specific)
>+
>+Bit 0 1 2-7 8 - 15 16 - 31
>+Function Command Reserved Pad Multiplexer ID Payload length
>+Bit 32 - 39 40 - 45 46 - 47 48 - 63
>+Function Command name Reserved Command Type Reserved
>+Bit 64 - 95
>+Function Transaction ID
>+Bit 96 - 127
>+Function Command data
>+
>+Command 1 indicates disabling flow while 2 is enabling flow
>+
>+Command types -
>+0 for MAP command request
>+1 is to acknowledge the receipt of a command
>+2 is for unsupported commands
>+3 is for error during processing of commands
>+
>+c. Aggregation
>+
>+Aggregation is multiple MAP packets (can be data or command) delivered to
>+rmnet_data in a single linear skb. rmnet_data will process the individual
>+packets and either ACK the MAP command or deliver the IP packet to the
>+network stack as needed
>+
>+MAP header|IP Packet|Optional padding|MAP header|IP Packet|Optional padding....
>+MAP header|IP Packet|Optional padding|MAP header|Command Packet|Optional pad...
>+
>+3. Userspace configuration
>+
>+rmnet_data userspace configuration is done through netlink library librmnetctl
>+and command line utility rmnetcli. Utility is hosted in codeaurora forum git
>+
>+https://source.codeaurora.org/quic/la/platform/vendor/qcom-opensource/\
>+dataservices/tree/rmnetctl
>diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
>index dd9820b..c488c87 100644
>--- a/include/uapi/linux/Kbuild
>+++ b/include/uapi/linux/Kbuild
>@@ -370,6 +370,7 @@ header-y += resource.h
> header-y += rfkill.h
> header-y += rio_cm_cdev.h
> header-y += rio_mport_cdev.h
>+header-y += rmnet_data.h
> header-y += romfs_fs.h
> header-y += rose.h
> header-y += route.h
>diff --git a/include/uapi/linux/if_arp.h b/include/uapi/linux/if_arp.h
>index 4d024d7..e762447 100644
>--- a/include/uapi/linux/if_arp.h
>+++ b/include/uapi/linux/if_arp.h
>@@ -59,6 +59,7 @@
> #define ARPHRD_LAPB 516 /* LAPB */
> #define ARPHRD_DDCMP 517 /* Digital's DDCMP protocol */
> #define ARPHRD_RAWHDLC 518 /* Raw HDLC */
>+#define ARPHRD_RAWIP 530 /* Raw IP */
>
> #define ARPHRD_TUNNEL 768 /* IPIP tunnel */
> #define ARPHRD_TUNNEL6 769 /* IP6IP6 tunnel */
>diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h
>index 5bc9bfd..70520da 100644
>--- a/include/uapi/linux/if_ether.h
>+++ b/include/uapi/linux/if_ether.h
>@@ -104,7 +104,9 @@
> #define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
> #define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
> #define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */
>-
>+#define ETH_P_MAP 0xDA1A /* Multiplexing and Aggregation Protocol
>+ * NOT AN OFFICIALLY REGISTERED ID ]
>+ */
> #define ETH_P_802_3_MIN 0x0600 /* If the value in the ethernet type is less than this value
> * then the frame is Ethernet II. Else it is 802.3 */
>
>diff --git a/include/uapi/linux/rmnet_data.h b/include/uapi/linux/rmnet_data.h
>new file mode 100644
>index 0000000..04b6646
>--- /dev/null
>+++ b/include/uapi/linux/rmnet_data.h
>@@ -0,0 +1,214 @@
>+/* Copyright (c) 2013-2017, The Linux Foundation. All rights reserved.
>+ *
>+ * This program is free software; you can redistribute it and/or modify
>+ * it under the terms of the GNU General Public License version 2 and
>+ * only version 2 as published by the Free Software Foundation.
>+ *
>+ * This program is distributed in the hope that it will be useful,
>+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
>+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>+ * GNU General Public License for more details.
>+ *
>+ * RMNET Data configuration specification
>+ */
>+
>+#ifndef _RMNET_DATA_H_
>+#define _RMNET_DATA_H_
>+
>+/* Netlink API */
>+#define RMNET_NETLINK_PROTO 31
>+#define RMNET_MAX_STR_LEN 16
>+#define RMNET_NL_DATA_MAX_LEN 64
>+
>+#define RMNET_NETLINK_MSG_COMMAND 0
>+#define RMNET_NETLINK_MSG_RETURNCODE 1
>+#define RMNET_NETLINK_MSG_RETURNDATA 2
>+
>+/* Constants */
>+#define RMNET_EGRESS_FORMAT__RESERVED__ (1<<0)
>+#define RMNET_EGRESS_FORMAT_MAP (1<<1)
>+#define RMNET_EGRESS_FORMAT_AGGREGATION (1<<2)
>+#define RMNET_EGRESS_FORMAT_MUXING (1<<3)
>+#define RMNET_EGRESS_FORMAT_MAP_CKSUMV3 (1<<4)
>+#define RMNET_EGRESS_FORMAT_MAP_CKSUMV4 (1<<5)
>+
>+#define RMNET_INGRESS_FIX_ETHERNET (1<<0)
>+#define RMNET_INGRESS_FORMAT_MAP (1<<1)
>+#define RMNET_INGRESS_FORMAT_DEAGGREGATION (1<<2)
>+#define RMNET_INGRESS_FORMAT_DEMUXING (1<<3)
>+#define RMNET_INGRESS_FORMAT_MAP_COMMANDS (1<<4)
>+#define RMNET_INGRESS_FORMAT_MAP_CKSUMV3 (1<<5)
>+#define RMNET_INGRESS_FORMAT_MAP_CKSUMV4 (1<<6)
>+
>+struct rmnet_nl_msg_s {
>+ __le16 reserved;
>+ __le16 message_type;
>+ __le16 reserved2:14;
>+ __le16 crd:2;
>+ union {
>+ __le16 arg_length;
>+ __le16 return_code;
>+ };
>+ union {
>+ __u8 data[RMNET_NL_DATA_MAX_LEN];
>+ struct {
>+ __u8 dev[RMNET_MAX_STR_LEN];
>+ __le32 flags;
>+ __le16 agg_size;
>+ __le16 agg_count;
>+ __u8 tail_spacing;
>+ } data_format;
>+ struct {
>+ __u8 dev[RMNET_MAX_STR_LEN];
>+ __le32 ep_id;
>+ __u8 operating_mode;
>+ __u8 next_dev[RMNET_MAX_STR_LEN];
>+ } local_ep_config;
>+ struct {
>+ __le32 id;
>+ __u8 vnd_name[RMNET_MAX_STR_LEN];
>+ } vnd;
>+ };
>+};
>+
>+enum rmnet_netlink_message_types_e {
>+ /* RMNET_NETLINK_ASSOCIATE_NETWORK_DEVICE - Register RMNET data driver
>+ * on a particular device.
>+ * Args: char[] dev_name: Null terminated ASCII string, max length: 15
>+ * Returns: status code
>+ */
>+ RMNET_NETLINK_ASSOCIATE_NETWORK_DEVICE,
>+
>+ /* RMNET_NETLINK_UNASSOCIATE_NETWORK_DEVICE - Unregister RMNET data
>+ * driver on a particular
>+ * device.
>+ * Args: char[] dev_name: Null terminated ASCII string, max length: 15
>+ * Returns: status code
>+ */
>+ RMNET_NETLINK_UNASSOCIATE_NETWORK_DEVICE,
>+
>+ /* RMNET_NETLINK_GET_NETWORK_DEVICE_ASSOCIATED - Get if RMNET data
>+ * driver is registered on a
>+ * particular device.
>+ * Args: char[] dev_name: Null terminated ASCII string, max length: 15
>+ * Returns: 1 if registered, 0 if not
>+ */
>+ RMNET_NETLINK_GET_NETWORK_DEVICE_ASSOCIATED,
>+
>+ /* RMNET_NETLINK_SET_LINK_EGRESS_DATA_FORMAT - Sets the egress data
>+ * format for a particular
>+ * link.
>+ * Args: __le32 egress_flags
>+ * char[] dev_name: Null terminated ASCII string, max length: 15
>+ * Returns: status code
>+ */
>+ RMNET_NETLINK_SET_LINK_EGRESS_DATA_FORMAT,
>+
>+ /* RMNET_NETLINK_GET_LINK_EGRESS_DATA_FORMAT - Gets the egress data
>+ * format for a particular
>+ * link.
>+ * Args: char[] dev_name: Null terminated ASCII string, max length: 15
>+ * Returns: 4-bytes data: __le32 egress_flags
>+ */
>+ RMNET_NETLINK_GET_LINK_EGRESS_DATA_FORMAT,
>+
>+ /* RMNET_NETLINK_SET_LINK_INGRESS_DATA_FORMAT - Sets the ingress data
>+ * format for a particular
>+ * link.
>+ * Args: __le32 ingress_flags
>+ * char[] dev_name: Null terminated ASCII string, max length: 15
>+ * Returns: status code
>+ */
>+ RMNET_NETLINK_SET_LINK_INGRESS_DATA_FORMAT,
>+
>+ /* RMNET_NETLINK_GET_LINK_INGRESS_DATA_FORMAT - Gets the ingress data
>+ * format for a particular
>+ * link.
>+ * Args: char[] dev_name: Null terminated ASCII string, max length: 15
>+ * Returns: 4-bytes data: __le32 ingress_flags
>+ */
>+ RMNET_NETLINK_GET_LINK_INGRESS_DATA_FORMAT,
>+
>+ /* RMNET_NETLINK_SET_LOGICAL_EP_CONFIG - Sets the logical endpoint
>+ * configuration for a particular
>+ * link.
>+ * Args: char[] dev_name: Null terminated ASCII string, max length: 15
>+ * __le32 logical_ep_id, valid values are -1 through 31
>+ * __u8 rmnet_mode: one of none, vnd, bridged
>+ * char[] egress_dev_name: Egress device if operating in bridge mode
>+ * Returns: status code
>+ */
>+ RMNET_NETLINK_SET_LOGICAL_EP_CONFIG,
>+
>+ /* RMNET_NETLINK_UNSET_LOGICAL_EP_CONFIG - Un-sets the logical endpoint
>+ * configuration for a particular
>+ * link.
>+ * Args: char[] dev_name: Null terminated ASCII string, max length: 15
>+ * __le32 logical_ep_id, valid values are -1 through 31
>+ * Returns: status code
>+ */
>+ RMNET_NETLINK_UNSET_LOGICAL_EP_CONFIG,
>+
>+ /* RMNET_NETLINK_GET_LOGICAL_EP_CONFIG - Gets the logical endpoint
>+ * configuration for a particular
>+ * link.
>+ * Args: char[] dev_name: Null terminated ASCII string, max length: 15
>+ * __le32 logical_ep_id, valid values are -1 through 31
>+ * Returns: __u8 rmnet_mode: one of none, vnd, bridged
>+ * char[] egress_dev_name: Egress device
>+ */
>+ RMNET_NETLINK_GET_LOGICAL_EP_CONFIG,
>+
>+ /* RMNET_NETLINK_NEW_VND - Creates a new virtual network device node
>+ * Args: __le32 node number
>+ * Returns: status code
>+ */
>+ RMNET_NETLINK_NEW_VND,
>+
>+ /* RMNET_NETLINK_NEW_VND_WITH_PREFIX - Creates a new virtual network
>+ * device node with the specified
>+ * prefix for the device name
>+ * Args: __le32 node number
>+ * char[] vnd_name - Use as prefix
>+ * Returns: status code
>+ */
>+ RMNET_NETLINK_NEW_VND_WITH_PREFIX,
>+
>+ /* RMNET_NETLINK_GET_VND_NAME - Gets the string name of a VND from ID
>+ * Args: __le32 node number
>+ * Returns: char[] vnd_name
>+ */
>+ RMNET_NETLINK_GET_VND_NAME,
>+
>+ /* RMNET_NETLINK_FREE_VND - Removes virtual network device node
>+ * Args: __le32 node number
>+ * Returns: status code
>+ */
>+ RMNET_NETLINK_FREE_VND
>+};
>+
>+enum rmnet_config_endpoint_modes_e {
>+ /* Pass the frame up the stack with no modifications to skb->dev */
>+ RMNET_EPMODE_NONE,
>+ /* Replace skb->dev to a virtual rmnet device and pass up the stack */
>+ RMNET_EPMODE_VND,
>+ /* Pass the frame directly to another device with dev_queue_xmit(). */
>+ RMNET_EPMODE_BRIDGE,
>+ /* Must be the last item in the list */
>+ RMNET_EPMODE_LENGTH
>+};
>+
>+enum rmnet_config_return_codes_e {
>+ RMNET_CONFIG_OK,
>+ RMNET_CONFIG_UNKNOWN_MESSAGE,
>+ RMNET_CONFIG_UNKNOWN_ERROR,
>+ RMNET_CONFIG_NOMEM,
>+ RMNET_CONFIG_DEVICE_IN_USE,
>+ RMNET_CONFIG_INVALID_REQUEST,
>+ RMNET_CONFIG_NO_SUCH_DEVICE,
>+ RMNET_CONFIG_BAD_ARGUMENTS,
>+ RMNET_CONFIG_BAD_EGRESS_DEVICE,
>+ RMNET_CONFIG_TC_HANDLE_FULL
>+};
>+
>+#endif /* _RMNET_DATA_H_ */
>diff --git a/net/Kconfig b/net/Kconfig
>index 102f781..77a0d93 100644
>--- a/net/Kconfig
>+++ b/net/Kconfig
>@@ -239,6 +239,7 @@ source "net/switchdev/Kconfig"
> source "net/l3mdev/Kconfig"
> source "net/qrtr/Kconfig"
> source "net/ncsi/Kconfig"
>+source "net/rmnet_data/Kconfig"
>
> config RPS
> bool
>diff --git a/net/Makefile b/net/Makefile
>index 9b68155..4a04f56 100644
>--- a/net/Makefile
>+++ b/net/Makefile
>@@ -84,3 +84,4 @@ obj-y += l3mdev/
> endif
> obj-$(CONFIG_QRTR) += qrtr/
> obj-$(CONFIG_NET_NCSI) += ncsi/
>+obj-$(CONFIG_RMNET_DATA) += rmnet_data/
>diff --git a/net/rmnet_data/Kconfig b/net/rmnet_data/Kconfig
>new file mode 100644
>index 0000000..4748a6f
>--- /dev/null
>+++ b/net/rmnet_data/Kconfig
>@@ -0,0 +1,21 @@
>+#
>+# RMNET Data and MAP driver
>+#
>+
>+menuconfig RMNET_DATA
>+ depends on NETDEVICES
>+ bool "RmNet Data and MAP driver"
>+ ---help---
>+ If you say Y here, then the rmnet_data module will be statically
>+ compiled into the kernel. The rmnet data module provides MAP
>+ functionality for embedded and bridged traffic.
>+if RMNET_DATA
>+
>+config RMNET_DATA_DEBUG
>+ bool "RmNet Data Debug Logging"
>+ ---help---
>+ Say Y here if you want RmNet data to be able to log packets in main
>+ system log. This should not be enabled on production builds as it can
>+ impact system performance. Note that simply enabling it here will not
>+ enable the logging; it must be enabled at run-time as well.
>+endif # RMNET_DATA
>diff --git a/net/rmnet_data/Makefile b/net/rmnet_data/Makefile
>new file mode 100644
>index 0000000..ccb8b5b
>--- /dev/null
>+++ b/net/rmnet_data/Makefile
>@@ -0,0 +1,14 @@
>+#
>+# Makefile for the RMNET Data module
>+#
>+
>+rmnet_data-y := rmnet_data_main.o
>+rmnet_data-y += rmnet_data_config.o
>+rmnet_data-y += rmnet_data_vnd.o
>+rmnet_data-y += rmnet_data_handlers.o
>+rmnet_data-y += rmnet_map_data.o
>+rmnet_data-y += rmnet_map_command.o
>+rmnet_data-y += rmnet_data_stats.o
>+obj-$(CONFIG_RMNET_DATA) += rmnet_data.o
>+
>+CFLAGS_rmnet_data_main.o := -I$(src)
>diff --git a/net/rmnet_data/rmnet_data_config.c b/net/rmnet_data/rmnet_data_config.c
>new file mode 100644
>index 0000000..38a21d8
>--- /dev/null
>+++ b/net/rmnet_data/rmnet_data_config.c
>@@ -0,0 +1,1168 @@
>+/* Copyright (c) 2013-2017, The Linux Foundation. All rights reserved.
>+ *
>+ * This program is free software; you can redistribute it and/or modify
>+ * it under the terms of the GNU General Public License version 2 and
>+ * only version 2 as published by the Free Software Foundation.
>+ *
>+ * This program is distributed in the hope that it will be useful,
>+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
>+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>+ * GNU General Public License for more details.
>+ *
>+ * RMNET Data configuration engine
>+ *
>+ */
>+
>+#include <net/sock.h>
>+#include <linux/module.h>
>+#include <linux/netlink.h>
>+#include <linux/netdevice.h>
>+#include <linux/skbuff.h>
>+#include <linux/spinlock.h>
>+#include <linux/rmnet_data.h>
>+#include "rmnet_data_config.h"
>+#include "rmnet_data_handlers.h"
>+#include "rmnet_data_vnd.h"
>+#include "rmnet_data_private.h"
>+#include "rmnet_data_trace.h"
>+
>+RMNET_LOG_MODULE(RMNET_DATA_LOGMASK_CONFIG);
>+
>+/* Local Definitions and Declarations */
>+#define RMNET_LOCAL_LOGICAL_ENDPOINT -1
>+
>+static struct sock *nl_socket_handle;
>+
>+static struct netlink_kernel_cfg rmnet_netlink_cfg = {
>+ .input = rmnet_config_netlink_msg_handler
>+};
>+
>+static struct notifier_block rmnet_dev_notifier = {
>+ .notifier_call = rmnet_config_notify_cb,
>+ .next = 0,
>+ .priority = 0
>+};
>+
>+struct rmnet_free_vnd_work {
>+ struct work_struct work;
>+ int vnd_id[RMNET_DATA_MAX_VND];
>+ int count;
>+};
>+
>+/* Init and Cleanup */
>+
>+static struct sock *_rmnet_config_start_netlink(void)
>+{
>+ return netlink_kernel_create(&init_net,
>+ RMNET_NETLINK_PROTO,
No, this is certainly not a good idea. If anything, please use Generic
Netlink. See nl80211 or devlink for an example.
>+ &rmnet_netlink_cfg);
>+}
>+
>+/* rmnet_config_init() - Startup init
>+ *
>+ * Registers netlink protocol with kernel and opens socket. Netlink handler is
>+ * registered with kernel.
>+ */
>+int rmnet_config_init(void)
>+{
>+ int rc;
>+
>+ nl_socket_handle = _rmnet_config_start_netlink();
>+ if (!nl_socket_handle) {
>+ LOGE("%s", "Failed to init netlink socket");
>+ return RMNET_INIT_ERROR;
>+ }
>+
>+ rc = register_netdevice_notifier(&rmnet_dev_notifier);
>+ if (rc != 0) {
>+ LOGE("Failed to register device notifier; rc=%d", rc);
>+ /* TODO: Cleanup the nl socket */
>+ return RMNET_INIT_ERROR;
>+ }
>+
>+ return 0;
>+}
>+
>+/* rmnet_config_exit() - Cleans up all netlink related resources
>+ */
>+void rmnet_config_exit(void)
>+{
>+ int rc;
>+
>+ netlink_kernel_release(nl_socket_handle);
>+ rc = unregister_netdevice_notifier(&rmnet_dev_notifier);
>+ if (rc != 0)
>+ LOGE("Failed to unregister device notifier; rc=%d", rc);
>+}
>+
>+/* Helper Functions */
>+
>+/* _rmnet_is_physical_endpoint_associated() - Determines if device is associated
>+ * @dev: Device to get check
>+ *
>+ * Compares device rx_handler callback pointer against known function
>+ *
>+ * Return:
>+ * - 1 if associated
>+ * - 0 if NOT associated
>+ */
>+static inline int _rmnet_is_physical_endpoint_associated(struct net_device *dev)
>+{
>+ rx_handler_func_t *rx_handler;
>+
>+ rx_handler = rcu_dereference(dev->rx_handler);
>+
>+ if (rx_handler == rmnet_rx_handler)
>+ return 1;
>+ else
>+ return 0;
>+}
>+
>+/* _rmnet_get_phys_ep_config() - Get physical ep config for an associated device
>+ * @dev: Device to get endpoint configuration from
>+ *
>+ * Return:
>+ * - pointer to configuration if successful
>+ * - 0 (null) if device is not associated
>+ */
>+static inline struct rmnet_phys_ep_conf_s *_rmnet_get_phys_ep_config
>+ (struct net_device *dev)
>+{
>+ if (_rmnet_is_physical_endpoint_associated(dev))
>+ return (struct rmnet_phys_ep_conf_s *)
>+ rcu_dereference(dev->rx_handler_data);
>+ else
>+ return 0;
>+}
>+
>+/* _rmnet_get_logical_ep() - Gets the logical end point configuration
>+ * structure for a network device
>+ * @dev: Device to get endpoint configuration from
>+ * @config_id: Logical endpoint id on device
>+ * Retrieves the logical_endpoint_config structure.
>+ *
>+ * Return:
>+ * - End point configuration structure
>+ * - NULL in case of an error
>+ */
>+struct rmnet_logical_ep_conf_s *_rmnet_get_logical_ep(struct net_device *dev,
>+ int config_id)
>+{
>+ struct rmnet_phys_ep_conf_s *config;
>+ struct rmnet_logical_ep_conf_s *epconfig_l;
>+
>+ if (rmnet_vnd_is_vnd(dev)) {
>+ epconfig_l = rmnet_vnd_get_le_config(dev);
>+ } else {
>+ config = _rmnet_get_phys_ep_config(dev);
>+
>+ if (!config)
>+ return NULL;
>+
>+ if (config_id == RMNET_LOCAL_LOGICAL_ENDPOINT)
>+ epconfig_l = &config->local_ep;
>+ else
>+ epconfig_l = &config->muxed_ep[config_id];
>+ }
>+
>+ return epconfig_l;
>+}
>+
>+static void _rmnet_netlink_set_link_egress_data_format
>+ (struct rmnet_nl_msg_s *rmnet_header,
>+ struct rmnet_nl_msg_s *resp_rmnet)
>+{
>+ struct net_device *dev;
>+
>+ if (!rmnet_header || !resp_rmnet)
>+ return;
>+
>+ resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
>+ dev = dev_get_by_name(&init_net, rmnet_header->data_format.dev);
>+
>+ if (!dev) {
>+ resp_rmnet->return_code = RMNET_CONFIG_NO_SUCH_DEVICE;
>+ return;
>+ }
>+
>+ resp_rmnet->return_code =
>+ rmnet_set_egress_data_format(dev,
>+ rmnet_header->data_format.flags,
>+ rmnet_header->data_format.agg_size,
>+ rmnet_header->data_format.agg_count
>+ );
>+ dev_put(dev);
>+}
>+
>+static void _rmnet_netlink_set_link_ingress_data_format
>+ (struct rmnet_nl_msg_s *rmnet_header,
>+ struct rmnet_nl_msg_s *resp_rmnet)
>+{
>+ struct net_device *dev;
>+
>+ if (!rmnet_header || !resp_rmnet)
>+ return;
>+
>+ resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
>+
>+ dev = dev_get_by_name(&init_net, rmnet_header->data_format.dev);
>+ if (!dev) {
>+ resp_rmnet->return_code = RMNET_CONFIG_NO_SUCH_DEVICE;
>+ return;
>+ }
>+
>+ resp_rmnet->return_code = rmnet_set_ingress_data_format(
>+ dev,
>+ rmnet_header->data_format.flags);
>+ dev_put(dev);
>+}
>+
>+static void _rmnet_netlink_set_logical_ep_config
>+ (struct rmnet_nl_msg_s *rmnet_header,
>+ struct rmnet_nl_msg_s *resp_rmnet)
>+{
>+ struct net_device *dev, *dev2;
>+
>+ if (!rmnet_header || !resp_rmnet)
>+ return;
>+
>+ resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
>+ if (rmnet_header->local_ep_config.ep_id < -1 ||
>+ rmnet_header->local_ep_config.ep_id > 254) {
>+ resp_rmnet->return_code = RMNET_CONFIG_BAD_ARGUMENTS;
>+ return;
>+ }
>+
>+ dev = dev_get_by_name(&init_net,
>+ rmnet_header->local_ep_config.dev);
>+
>+ dev2 = dev_get_by_name(&init_net,
>+ rmnet_header->local_ep_config.next_dev);
>+
>+ if (dev && dev2)
>+ resp_rmnet->return_code =
>+ rmnet_set_logical_endpoint_config(
>+ dev,
>+ rmnet_header->local_ep_config.ep_id,
>+ rmnet_header->local_ep_config.operating_mode,
>+ dev2);
>+ else
>+ resp_rmnet->return_code = RMNET_CONFIG_NO_SUCH_DEVICE;
>+
>+ if (dev)
>+ dev_put(dev);
>+ if (dev2)
>+ dev_put(dev2);
>+}
>+
>+static void _rmnet_netlink_unset_logical_ep_config
>+ (struct rmnet_nl_msg_s *rmnet_header,
>+ struct rmnet_nl_msg_s *resp_rmnet)
>+{
>+ struct net_device *dev;
>+
>+ if (!rmnet_header || !resp_rmnet)
>+ return;
>+
>+ resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
>+ if (rmnet_header->local_ep_config.ep_id < -1 ||
>+ rmnet_header->local_ep_config.ep_id > 254) {
>+ resp_rmnet->return_code = RMNET_CONFIG_BAD_ARGUMENTS;
>+ return;
>+ }
>+
>+ dev = dev_get_by_name(&init_net, rmnet_header->local_ep_config.dev);
>+
>+ if (dev) {
>+ resp_rmnet->return_code =
>+ rmnet_unset_logical_endpoint_config(
>+ dev,
>+ rmnet_header->local_ep_config.ep_id);
>+ dev_put(dev);
>+ } else {
>+ resp_rmnet->return_code = RMNET_CONFIG_NO_SUCH_DEVICE;
>+ }
>+}
>+
>+static void _rmnet_netlink_get_logical_ep_config
>+ (struct rmnet_nl_msg_s *rmnet_header,
>+ struct rmnet_nl_msg_s *resp_rmnet)
>+{
>+ struct net_device *dev;
>+
>+ if (!rmnet_header || !resp_rmnet)
>+ return;
>+
>+ resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
>+ if (rmnet_header->local_ep_config.ep_id < -1 ||
>+ rmnet_header->local_ep_config.ep_id > 254) {
>+ resp_rmnet->return_code = RMNET_CONFIG_BAD_ARGUMENTS;
>+ return;
>+ }
>+
>+ dev = dev_get_by_name(&init_net, rmnet_header->local_ep_config.dev);
>+
>+ if (dev) {
>+ resp_rmnet->return_code =
>+ rmnet_get_logical_endpoint_config(
>+ dev,
>+ rmnet_header->local_ep_config.ep_id,
>+ &resp_rmnet->local_ep_config.operating_mode,
>+ resp_rmnet->local_ep_config.next_dev,
>+ sizeof(resp_rmnet->local_ep_config.next_dev));
>+ } else {
>+ resp_rmnet->return_code = RMNET_CONFIG_NO_SUCH_DEVICE;
>+ return;
>+ }
>+
>+ if (resp_rmnet->return_code == RMNET_CONFIG_OK) {
>+ /* Begin Data */
>+ resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNDATA;
>+ resp_rmnet->arg_length = sizeof(((struct rmnet_nl_msg_s *)0)
>+ ->local_ep_config);
>+ }
>+ dev_put(dev);
>+}
>+
>+static void _rmnet_netlink_associate_network_device
>+ (struct rmnet_nl_msg_s *rmnet_header,
>+ struct rmnet_nl_msg_s *resp_rmnet)
>+{
>+ struct net_device *dev;
>+
>+ if (!rmnet_header || !resp_rmnet)
>+ return;
>+
>+ resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
>+
>+ dev = dev_get_by_name(&init_net, rmnet_header->data);
>+ if (!dev) {
>+ resp_rmnet->return_code = RMNET_CONFIG_NO_SUCH_DEVICE;
>+ return;
>+ }
>+
>+ resp_rmnet->return_code = rmnet_associate_network_device(dev);
>+ dev_put(dev);
>+}
>+
>+static void _rmnet_netlink_unassociate_network_device
>+ (struct rmnet_nl_msg_s *rmnet_header,
>+ struct rmnet_nl_msg_s *resp_rmnet)
>+{
>+ struct net_device *dev;
>+
>+ if (!rmnet_header || !resp_rmnet)
>+ return;
>+
>+ resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
>+
>+ dev = dev_get_by_name(&init_net, rmnet_header->data);
>+ if (!dev) {
>+ resp_rmnet->return_code = RMNET_CONFIG_NO_SUCH_DEVICE;
>+ return;
>+ }
>+
>+ resp_rmnet->return_code = rmnet_unassociate_network_device(dev);
>+ dev_put(dev);
>+}
>+
>+static void _rmnet_netlink_get_network_device_associated
>+ (struct rmnet_nl_msg_s *rmnet_header,
>+ struct rmnet_nl_msg_s *resp_rmnet)
>+{
>+ struct net_device *dev;
>+
>+ if (!rmnet_header || !resp_rmnet)
>+ return;
>+
>+ resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
>+
>+ dev = dev_get_by_name(&init_net, rmnet_header->data);
>+ if (!dev) {
>+ resp_rmnet->return_code = RMNET_CONFIG_NO_SUCH_DEVICE;
>+ return;
>+ }
>+
>+ resp_rmnet->return_code = _rmnet_is_physical_endpoint_associated(dev);
>+ resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNDATA;
>+ dev_put(dev);
>+}
>+
>+static void _rmnet_netlink_get_link_egress_data_format
>+ (struct rmnet_nl_msg_s *rmnet_header,
>+ struct rmnet_nl_msg_s *resp_rmnet)
>+{
>+ struct net_device *dev;
>+ struct rmnet_phys_ep_conf_s *config;
>+
>+ if (!rmnet_header || !resp_rmnet)
>+ return;
>+
>+ resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
>+
>+ dev = dev_get_by_name(&init_net, rmnet_header->data_format.dev);
>+ if (!dev) {
>+ resp_rmnet->return_code = RMNET_CONFIG_NO_SUCH_DEVICE;
>+ return;
>+ }
>+
>+ config = _rmnet_get_phys_ep_config(dev);
>+ if (!config) {
>+ resp_rmnet->return_code = RMNET_CONFIG_INVALID_REQUEST;
>+ dev_put(dev);
>+ return;
>+ }
>+
>+ /* Begin Data */
>+ resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNDATA;
>+ resp_rmnet->arg_length = sizeof(((struct rmnet_nl_msg_s *)0)
>+ ->data_format);
>+ resp_rmnet->data_format.flags = config->egress_data_format;
>+ resp_rmnet->data_format.agg_count = 0;
>+ resp_rmnet->data_format.agg_size = 0;
>+ dev_put(dev);
>+}
>+
>+static void _rmnet_netlink_get_link_ingress_data_format
>+ (struct rmnet_nl_msg_s *rmnet_header,
>+ struct rmnet_nl_msg_s *resp_rmnet)
>+{
>+ struct net_device *dev;
>+ struct rmnet_phys_ep_conf_s *config;
>+
>+ if (!rmnet_header || !resp_rmnet)
>+ return;
>+
>+ resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
>+
>+ dev = dev_get_by_name(&init_net, rmnet_header->data_format.dev);
>+ if (!dev) {
>+ resp_rmnet->return_code = RMNET_CONFIG_NO_SUCH_DEVICE;
>+ return;
>+ }
>+
>+ config = _rmnet_get_phys_ep_config(dev);
>+ if (!config) {
>+ resp_rmnet->return_code = RMNET_CONFIG_INVALID_REQUEST;
>+ dev_put(dev);
>+ return;
>+ }
>+
>+ /* Begin Data */
>+ resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNDATA;
>+ resp_rmnet->arg_length = sizeof(((struct rmnet_nl_msg_s *)0)
>+ ->data_format);
>+ resp_rmnet->data_format.flags = config->ingress_data_format;
>+ dev_put(dev);
>+}
>+
>+static void _rmnet_netlink_get_vnd_name
>+ (struct rmnet_nl_msg_s *rmnet_header,
>+ struct rmnet_nl_msg_s *resp_rmnet)
>+{
>+ int r;
>+
>+ if (!rmnet_header || !resp_rmnet)
>+ return;
>+
>+ resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
>+
>+ r = rmnet_vnd_get_name(rmnet_header->vnd.id, resp_rmnet->vnd.vnd_name,
>+ RMNET_MAX_STR_LEN);
>+
>+ if (r != 0) {
>+ resp_rmnet->return_code = RMNET_CONFIG_INVALID_REQUEST;
>+ return;
>+ }
>+
>+ /* Begin Data */
>+ resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNDATA;
>+ resp_rmnet->arg_length = sizeof(((struct rmnet_nl_msg_s *)0)->vnd);
>+}
>+
>+/* rmnet_config_netlink_msg_handler() - Netlink message handler callback
>+ * @skb: Packet containing netlink messages
>+ *
>+ * Standard kernel-expected format for a netlink message handler. Processes SKBs
>+ * which contain RmNet data specific netlink messages.
>+ */
>+void rmnet_config_netlink_msg_handler(struct sk_buff *skb)
>+{
>+ struct nlmsghdr *nlmsg_header, *resp_nlmsg;
>+ struct rmnet_nl_msg_s *rmnet_header, *resp_rmnet;
>+ int return_pid, response_data_length;
>+ struct sk_buff *skb_response;
>+
>+ response_data_length = 0;
>+ nlmsg_header = (struct nlmsghdr *)skb->data;
>+ rmnet_header = (struct rmnet_nl_msg_s *)nlmsg_data(nlmsg_header);
>+
>+ if (!nlmsg_header->nlmsg_pid ||
>+ (nlmsg_header->nlmsg_len < sizeof(struct nlmsghdr) +
>+ sizeof(struct rmnet_nl_msg_s)))
>+ return;
>+
>+ LOGL("Netlink message pid=%d, seq=%d, length=%d, rmnet_type=%d",
>+ nlmsg_header->nlmsg_pid,
>+ nlmsg_header->nlmsg_seq,
>+ nlmsg_header->nlmsg_len,
>+ rmnet_header->message_type);
>+
>+ return_pid = nlmsg_header->nlmsg_pid;
>+
>+ skb_response = nlmsg_new(sizeof(struct nlmsghdr)
>+ + sizeof(struct rmnet_nl_msg_s),
>+ GFP_KERNEL);
>+
>+ if (!skb_response) {
>+ LOGH("%s", "Failed to allocate response buffer");
>+ return;
>+ }
>+
>+ resp_nlmsg = nlmsg_put(skb_response,
>+ 0,
>+ nlmsg_header->nlmsg_seq,
>+ NLMSG_DONE,
>+ sizeof(struct rmnet_nl_msg_s),
>+ 0);
>+
>+ resp_rmnet = nlmsg_data(resp_nlmsg);
>+
>+ if (!resp_rmnet)
>+ return;
>+
>+ resp_rmnet->message_type = rmnet_header->message_type;
>+ rtnl_lock();
>+ switch (rmnet_header->message_type) {
>+ case RMNET_NETLINK_ASSOCIATE_NETWORK_DEVICE:
>+ _rmnet_netlink_associate_network_device
>+ (rmnet_header, resp_rmnet);
>+ break;
>+
>+ case RMNET_NETLINK_UNASSOCIATE_NETWORK_DEVICE:
>+ _rmnet_netlink_unassociate_network_device
>+ (rmnet_header, resp_rmnet);
>+ break;
>+
>+ case RMNET_NETLINK_GET_NETWORK_DEVICE_ASSOCIATED:
>+ _rmnet_netlink_get_network_device_associated
>+ (rmnet_header, resp_rmnet);
>+ break;
>+
>+ case RMNET_NETLINK_SET_LINK_EGRESS_DATA_FORMAT:
>+ _rmnet_netlink_set_link_egress_data_format
>+ (rmnet_header, resp_rmnet);
>+ break;
>+
>+ case RMNET_NETLINK_GET_LINK_EGRESS_DATA_FORMAT:
>+ _rmnet_netlink_get_link_egress_data_format
>+ (rmnet_header, resp_rmnet);
>+ break;
>+
>+ case RMNET_NETLINK_SET_LINK_INGRESS_DATA_FORMAT:
>+ _rmnet_netlink_set_link_ingress_data_format
>+ (rmnet_header, resp_rmnet);
>+ break;
>+
>+ case RMNET_NETLINK_GET_LINK_INGRESS_DATA_FORMAT:
>+ _rmnet_netlink_get_link_ingress_data_format
>+ (rmnet_header, resp_rmnet);
>+ break;
>+
>+ case RMNET_NETLINK_SET_LOGICAL_EP_CONFIG:
>+ _rmnet_netlink_set_logical_ep_config(rmnet_header, resp_rmnet);
>+ break;
>+
>+ case RMNET_NETLINK_UNSET_LOGICAL_EP_CONFIG:
>+ _rmnet_netlink_unset_logical_ep_config(rmnet_header,
>+ resp_rmnet);
>+ break;
>+
>+ case RMNET_NETLINK_GET_LOGICAL_EP_CONFIG:
>+ _rmnet_netlink_get_logical_ep_config(rmnet_header, resp_rmnet);
>+ break;
>+
>+ case RMNET_NETLINK_NEW_VND:
>+ resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
>+ resp_rmnet->return_code =
>+ rmnet_create_vnd(rmnet_header->vnd.id);
>+ break;
>+
>+ case RMNET_NETLINK_NEW_VND_WITH_PREFIX:
>+ resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
>+ resp_rmnet->return_code = rmnet_create_vnd_prefix(
>+ rmnet_header->vnd.id,
>+ rmnet_header->vnd.vnd_name);
>+ break;
>+
>+ case RMNET_NETLINK_FREE_VND:
>+ resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
>+ /* Please check rmnet_vnd_free_dev documentation regarding
>+ * the below locking sequence
>+ */
>+ rtnl_unlock();
>+ resp_rmnet->return_code = rmnet_free_vnd(rmnet_header->vnd.id);
>+ rtnl_lock();
>+ break;
>+
>+ case RMNET_NETLINK_GET_VND_NAME:
>+ _rmnet_netlink_get_vnd_name(rmnet_header, resp_rmnet);
>+ break;
>+
>+ default:
>+ resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
>+ resp_rmnet->return_code = RMNET_CONFIG_UNKNOWN_MESSAGE;
>+ break;
>+ }
>+ rtnl_unlock();
>+ nlmsg_unicast(nl_socket_handle, skb_response, return_pid);
>+ LOGD("%s", "Done processing command");
>+}
>+
>+/* Configuration API */
>+
>+/* rmnet_unassociate_network_device() - Unassociate network device
>+ * @dev: Device to unassociate
>+ *
>+ * Frees all structures generate for device. Unregisters rx_handler
>+ * todo: needs to do some sanity verification first (is device in use, etc...)
>+ *
>+ * Return:
>+ * - RMNET_CONFIG_OK if successful
>+ * - RMNET_CONFIG_NO_SUCH_DEVICE dev is null
>+ * - RMNET_CONFIG_INVALID_REQUEST if device is not already associated
>+ * - RMNET_CONFIG_DEVICE_IN_USE if device has logical ep that wasn't unset
>+ * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is null
>+ */
>+int rmnet_unassociate_network_device(struct net_device *dev)
>+{
>+ struct rmnet_phys_ep_conf_s *config;
>+ int config_id = RMNET_LOCAL_LOGICAL_ENDPOINT;
>+ struct rmnet_logical_ep_conf_s *epconfig_l;
>+
>+ ASSERT_RTNL();
>+
>+ LOGL("(%s);", dev->name);
>+
>+ if (!dev)
>+ return RMNET_CONFIG_NO_SUCH_DEVICE;
>+
>+ if (!_rmnet_is_physical_endpoint_associated(dev))
>+ return RMNET_CONFIG_INVALID_REQUEST;
>+
>+ for (; config_id < RMNET_DATA_MAX_LOGICAL_EP; config_id++) {
>+ epconfig_l = _rmnet_get_logical_ep(dev, config_id);
>+ if (epconfig_l && epconfig_l->refcount)
>+ return RMNET_CONFIG_DEVICE_IN_USE;
>+ }
>+
>+ config = (struct rmnet_phys_ep_conf_s *)
>+ rcu_dereference(dev->rx_handler_data);
>+
>+ if (!config)
>+ return RMNET_CONFIG_UNKNOWN_ERROR;
>+
>+ kfree(config);
>+
>+ netdev_rx_handler_unregister(dev);
>+
>+ /* Explicitly release the reference from the device */
>+ dev_put(dev);
>+ trace_rmnet_unassociate(dev);
>+ return RMNET_CONFIG_OK;
>+}
>+
>+/* rmnet_set_ingress_data_format() - Set ingress data format on network device
>+ * @dev: Device to ingress data format on
>+ * @egress_data_format: 32-bit unsigned bitmask of ingress format
>+ *
>+ * Network device must already have association with RmNet Data driver
>+ *
>+ * Return:
>+ * - RMNET_CONFIG_OK if successful
>+ * - RMNET_CONFIG_NO_SUCH_DEVICE dev is null
>+ * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is null
>+ */
>+int rmnet_set_ingress_data_format(struct net_device *dev,
>+ u32 ingress_data_format)
>+{
>+ struct rmnet_phys_ep_conf_s *config;
>+
>+ ASSERT_RTNL();
>+
>+ LOGL("(%s,0x%08X);", dev->name, ingress_data_format);
>+
>+ if (!dev)
>+ return RMNET_CONFIG_NO_SUCH_DEVICE;
>+
>+ config = _rmnet_get_phys_ep_config(dev);
>+
>+ if (!config)
>+ return RMNET_CONFIG_INVALID_REQUEST;
>+
>+ config->ingress_data_format = ingress_data_format;
>+
>+ return RMNET_CONFIG_OK;
>+}
>+
>+/* rmnet_set_egress_data_format() - Set egress data format on network device
>+ * @dev: Device to egress data format on
>+ * @egress_data_format: 32-bit unsigned bitmask of egress format
>+ *
>+ * Network device must already have association with RmNet Data driver
>+ * todo: Bounds check on agg_*
>+ *
>+ * Return:
>+ * - RMNET_CONFIG_OK if successful
>+ * - RMNET_CONFIG_NO_SUCH_DEVICE dev is null
>+ * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is null
>+ */
>+int rmnet_set_egress_data_format(struct net_device *dev,
>+ u32 egress_data_format,
>+ u16 agg_size,
>+ u16 agg_count)
>+{
>+ struct rmnet_phys_ep_conf_s *config;
>+
>+ ASSERT_RTNL();
>+
>+ LOGL("(%s,0x%08X, %d, %d);",
>+ dev->name, egress_data_format, agg_size, agg_count);
>+
>+ if (!dev)
>+ return RMNET_CONFIG_NO_SUCH_DEVICE;
>+
>+ config = _rmnet_get_phys_ep_config(dev);
>+
>+ if (!config)
>+ return RMNET_CONFIG_UNKNOWN_ERROR;
>+
>+ config->egress_data_format = egress_data_format;
>+
>+ return RMNET_CONFIG_OK;
>+}
>+
>+/* rmnet_associate_network_device() - Associate network device
>+ * @dev: Device to register with RmNet data
>+ *
>+ * Typically used on physical network devices. Registers RX handler and private
>+ * metadata structures.
>+ *
>+ * Return:
>+ * - RMNET_CONFIG_OK if successful
>+ * - RMNET_CONFIG_NO_SUCH_DEVICE dev is null
>+ * - RMNET_CONFIG_INVALID_REQUEST if the device to be associated is a vnd
>+ * - RMNET_CONFIG_DEVICE_IN_USE if dev rx_handler is already filled
>+ * - RMNET_CONFIG_DEVICE_IN_USE if netdev_rx_handler_register() fails
>+ */
>+int rmnet_associate_network_device(struct net_device *dev)
>+{
>+ struct rmnet_phys_ep_conf_s *config;
>+ int rc;
>+
>+ ASSERT_RTNL();
>+
>+ LOGL("(%s);\n", dev->name);
>+
>+ if (!dev)
>+ return RMNET_CONFIG_NO_SUCH_DEVICE;
>+
>+ if (_rmnet_is_physical_endpoint_associated(dev)) {
>+ LOGM("%s is already regestered", dev->name);
>+ return RMNET_CONFIG_DEVICE_IN_USE;
>+ }
>+
>+ if (rmnet_vnd_is_vnd(dev)) {
>+ LOGM("%s is a vnd", dev->name);
>+ return RMNET_CONFIG_INVALID_REQUEST;
>+ }
>+
>+ config = kmalloc(sizeof(*config), GFP_ATOMIC);
>+
>+ if (!config)
>+ return RMNET_CONFIG_NOMEM;
>+
>+ memset(config, 0, sizeof(struct rmnet_phys_ep_conf_s));
>+ config->dev = dev;
>+
>+ rc = netdev_rx_handler_register(dev, rmnet_rx_handler, config);
>+
>+ if (rc) {
>+ LOGM("netdev_rx_handler_register returns %d", rc);
>+ kfree(config);
>+ return RMNET_CONFIG_DEVICE_IN_USE;
>+ }
>+
>+ /* Explicitly hold a reference to the device */
>+ dev_hold(dev);
>+ trace_rmnet_associate(dev);
>+ return RMNET_CONFIG_OK;
>+}
>+
>+/* _rmnet_set_logical_endpoint_config() - Set logical endpoing config on device
>+ * @dev: Device to set endpoint configuration on
>+ * @config_id: logical endpoint id on device
>+ * @epconfig: endpoing configuration structure to set
>+ *
>+ * Return:
>+ * - RMNET_CONFIG_OK if successful
>+ * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is null
>+ * - RMNET_CONFIG_NO_SUCH_DEVICE if device to set config on is null
>+ * - RMNET_CONFIG_DEVICE_IN_USE if device already has a logical ep
>+ * - RMNET_CONFIG_BAD_ARGUMENTS if logical endpoint id is out of range
>+ */
>+int _rmnet_set_logical_endpoint_config(struct net_device *dev,
>+ int config_id,
>+ struct rmnet_logical_ep_conf_s *epconfig)
>+{
>+ struct rmnet_logical_ep_conf_s *epconfig_l;
>+
>+ ASSERT_RTNL();
>+
>+ if (!dev)
>+ return RMNET_CONFIG_NO_SUCH_DEVICE;
>+
>+ if (config_id < RMNET_LOCAL_LOGICAL_ENDPOINT ||
>+ config_id >= RMNET_DATA_MAX_LOGICAL_EP)
>+ return RMNET_CONFIG_BAD_ARGUMENTS;
>+
>+ epconfig_l = _rmnet_get_logical_ep(dev, config_id);
>+
>+ if (!epconfig_l)
>+ return RMNET_CONFIG_UNKNOWN_ERROR;
>+
>+ if (epconfig_l->refcount)
>+ return RMNET_CONFIG_DEVICE_IN_USE;
>+
>+ memcpy(epconfig_l, epconfig, sizeof(struct rmnet_logical_ep_conf_s));
>+ if (config_id == RMNET_LOCAL_LOGICAL_ENDPOINT)
>+ epconfig_l->mux_id = 0;
>+ else
>+ epconfig_l->mux_id = config_id;
>+
>+ /* Explicitly hold a reference to the egress device */
>+ dev_hold(epconfig_l->egress_dev);
>+ return RMNET_CONFIG_OK;
>+}
>+
>+/* _rmnet_unset_logical_endpoint_config() - Un-set the logical endpoing config
>+ * on device
>+ * @dev: Device to set endpoint configuration on
>+ * @config_id: logical endpoint id on device
>+ *
>+ * Return:
>+ * - RMNET_CONFIG_OK if successful
>+ * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is null
>+ * - RMNET_CONFIG_NO_SUCH_DEVICE if device to set config on is null
>+ * - RMNET_CONFIG_BAD_ARGUMENTS if logical endpoint id is out of range
>+ */
>+int _rmnet_unset_logical_endpoint_config(struct net_device *dev,
>+ int config_id)
>+{
>+ struct rmnet_logical_ep_conf_s *epconfig_l = 0;
>+
>+ ASSERT_RTNL();
>+
>+ if (!dev)
>+ return RMNET_CONFIG_NO_SUCH_DEVICE;
>+
>+ if (config_id < RMNET_LOCAL_LOGICAL_ENDPOINT ||
>+ config_id >= RMNET_DATA_MAX_LOGICAL_EP)
>+ return RMNET_CONFIG_BAD_ARGUMENTS;
>+
>+ epconfig_l = _rmnet_get_logical_ep(dev, config_id);
>+
>+ if (!epconfig_l || !epconfig_l->refcount)
>+ return RMNET_CONFIG_NO_SUCH_DEVICE;
>+
>+ /* Explicitly release the reference from the egress device */
>+ dev_put(epconfig_l->egress_dev);
>+ memset(epconfig_l, 0, sizeof(struct rmnet_logical_ep_conf_s));
>+
>+ return RMNET_CONFIG_OK;
>+}
>+
>+/* rmnet_set_logical_endpoint_config() - Set logical endpoint config on a device
>+ * @dev: Device to set endpoint configuration on
>+ * @config_id: logical endpoint id on device
>+ * @rmnet_mode: endpoint mode. Values from: rmnet_config_endpoint_modes_e
>+ * @egress_device: device node to forward packet to once done processing in
>+ * ingress/egress handlers
>+ *
>+ * Creates a logical_endpoint_config structure and fills in the information from
>+ * function arguments. Calls _rmnet_set_logical_endpoint_config() to finish
>+ * configuration. Network device must already have association with RmNet Data
>+ * driver
>+ *
>+ * Return:
>+ * - RMNET_CONFIG_OK if successful
>+ * - RMNET_CONFIG_BAD_EGRESS_DEVICE if egress device is null
>+ * - RMNET_CONFIG_BAD_EGRESS_DEVICE if egress device is not handled by
>+ * RmNet data module
>+ * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is null
>+ * - RMNET_CONFIG_NO_SUCH_DEVICE if device to set config on is null
>+ * - RMNET_CONFIG_BAD_ARGUMENTS if logical endpoint id is out of range
>+ */
>+int rmnet_set_logical_endpoint_config(struct net_device *dev,
>+ int config_id,
>+ u8 rmnet_mode,
>+ struct net_device *egress_dev)
>+{
>+ struct rmnet_logical_ep_conf_s epconfig;
>+
>+ LOGL("(%s, %d, %d, %s);",
>+ dev->name, config_id, rmnet_mode, egress_dev->name);
>+
>+ if (!egress_dev ||
>+ ((!_rmnet_is_physical_endpoint_associated(egress_dev)) &&
>+ (!rmnet_vnd_is_vnd(egress_dev)))) {
>+ return RMNET_CONFIG_BAD_EGRESS_DEVICE;
>+ }
>+
>+ memset(&epconfig, 0, sizeof(struct rmnet_logical_ep_conf_s));
>+ epconfig.refcount = 1;
>+ epconfig.rmnet_mode = rmnet_mode;
>+ epconfig.egress_dev = egress_dev;
>+
>+ return _rmnet_set_logical_endpoint_config(dev, config_id, &epconfig);
>+}
>+
>+/* rmnet_unset_logical_endpoint_config() - Un-set logical endpoing configuration
>+ * on a device
>+ * @dev: Device to set endpoint configuration on
>+ * @config_id: logical endpoint id on device
>+ *
>+ * Retrieves the logical_endpoint_config structure and frees the egress device.
>+ * Network device must already have association with RmNet Data driver
>+ *
>+ * Return:
>+ * - RMNET_CONFIG_OK if successful
>+ * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is null
>+ * - RMNET_CONFIG_NO_SUCH_DEVICE device is not associated
>+ * - RMNET_CONFIG_BAD_ARGUMENTS if logical endpoint id is out of range
>+ */
>+int rmnet_unset_logical_endpoint_config(struct net_device *dev,
>+ int config_id)
>+{
>+ LOGL("(%s, %d);", dev->name, config_id);
>+
>+ if (!dev ||
>+ ((!_rmnet_is_physical_endpoint_associated(dev)) &&
>+ (!rmnet_vnd_is_vnd(dev)))) {
>+ return RMNET_CONFIG_NO_SUCH_DEVICE;
>+ }
>+
>+ return _rmnet_unset_logical_endpoint_config(dev, config_id);
>+}
>+
>+/* rmnet_get_logical_endpoint_config() - Gets logical endpoing configuration
>+ * for a device
>+ * @dev: Device to get endpoint configuration on
>+ * @config_id: logical endpoint id on device
>+ * @rmnet_mode: (I/O) logical endpoint mode
>+ * @egress_dev_name: (I/O) logical endpoint egress device name
>+ * @egress_dev_name_size: The maximal size of the I/O egress_dev_name
>+ *
>+ * Retrieves the logical_endpoint_config structure.
>+ * Network device must already have association with RmNet Data driver
>+ *
>+ * Return:
>+ * - RMNET_CONFIG_OK if successful
>+ * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is null
>+ * - RMNET_CONFIG_NO_SUCH_DEVICE device is not associated
>+ * - RMNET_CONFIG_BAD_ARGUMENTS if logical endpoint id is out of range or
>+ * if the provided buffer size for egress dev name is too short
>+ */
>+int rmnet_get_logical_endpoint_config(struct net_device *dev,
>+ int config_id,
>+ u8 *rmnet_mode,
>+ u8 *egress_dev_name,
>+ size_t egress_dev_name_size)
>+{
>+ struct rmnet_logical_ep_conf_s *epconfig_l = 0;
>+ size_t strlcpy_res = 0;
>+
>+ LOGL("(%s, %d);", dev->name, config_id);
>+
>+ if (!egress_dev_name || !rmnet_mode)
>+ return RMNET_CONFIG_BAD_ARGUMENTS;
>+ if (config_id < RMNET_LOCAL_LOGICAL_ENDPOINT ||
>+ config_id >= RMNET_DATA_MAX_LOGICAL_EP)
>+ return RMNET_CONFIG_BAD_ARGUMENTS;
>+
>+ epconfig_l = _rmnet_get_logical_ep(dev, config_id);
>+
>+ if (!epconfig_l || !epconfig_l->refcount)
>+ return RMNET_CONFIG_NO_SUCH_DEVICE;
>+
>+ *rmnet_mode = epconfig_l->rmnet_mode;
>+
>+ strlcpy_res = strlcpy(egress_dev_name, epconfig_l->egress_dev->name,
>+ egress_dev_name_size);
>+
>+ if (strlcpy_res >= egress_dev_name_size)
>+ return RMNET_CONFIG_BAD_ARGUMENTS;
>+
>+ return RMNET_CONFIG_OK;
>+}
>+
>+/* rmnet_create_vnd() - Create virtual network device node
>+ * @id: RmNet virtual device node id
>+ *
>+ * Return:
>+ * - result of rmnet_vnd_create_dev()
>+ */
>+int rmnet_create_vnd(int id)
>+{
>+ struct net_device *dev;
>+
>+ ASSERT_RTNL();
>+ LOGL("(%d);", id);
>+ return rmnet_vnd_create_dev(id, &dev, NULL);
>+}
>+
>+/* rmnet_create_vnd() - Create virtual network device node
>+ * @id: RmNet virtual device node id
>+ * @prefix: String prefix for device name
>+ *
>+ * Return:
>+ * - result of rmnet_vnd_create_dev()
>+ */
>+int rmnet_create_vnd_prefix(int id, const char *prefix)
>+{
>+ struct net_device *dev;
>+
>+ ASSERT_RTNL();
>+ LOGL("(%d, \"%s\");", id, prefix);
>+ return rmnet_vnd_create_dev(id, &dev, prefix);
>+}
>+
>+/* rmnet_free_vnd() - Free virtual network device node
>+ * @id: RmNet virtual device node id
>+ *
>+ * Return:
>+ * - result of rmnet_vnd_free_dev()
>+ */
>+int rmnet_free_vnd(int id)
>+{
>+ LOGL("(%d);", id);
>+ return rmnet_vnd_free_dev(id);
>+}
>+
>+static void _rmnet_free_vnd_later(struct work_struct *work)
>+{
>+ int i;
>+ struct rmnet_free_vnd_work *fwork;
>+
>+ fwork = container_of(work, struct rmnet_free_vnd_work, work);
>+
>+ for (i = 0; i < fwork->count; i++)
>+ rmnet_free_vnd(fwork->vnd_id[i]);
>+ kfree(fwork);
>+}
>+
>+/* rmnet_force_unassociate_device() - Force a device to unassociate
>+ * @dev: Device to unassociate
>+ *
>+ * Return:
>+ * - void
>+ */
>+static void rmnet_force_unassociate_device(struct net_device *dev)
>+{
>+ int i, j;
>+ struct net_device *vndev;
>+ struct rmnet_logical_ep_conf_s *cfg;
>+ struct rmnet_free_vnd_work *vnd_work;
>+
>+ ASSERT_RTNL();
>+ if (!dev)
>+ return;
>+
>+ if (!_rmnet_is_physical_endpoint_associated(dev)) {
>+ LOGM("%s", "Called on unassociated device, skipping");
>+ return;
>+ }
>+
>+ trace_rmnet_unregister_cb_clear_vnds(dev);
>+ vnd_work = kmalloc(sizeof(*vnd_work), GFP_KERNEL);
>+ if (!vnd_work) {
>+ LOGH("%s", "Out of Memory");
>+ return;
>+ }
>+ INIT_WORK(&vnd_work->work, _rmnet_free_vnd_later);
>+ vnd_work->count = 0;
>+
>+ /* Check the VNDs for offending mappings */
>+ for (i = 0, j = 0; i < RMNET_DATA_MAX_VND &&
>+ j < RMNET_DATA_MAX_VND; i++) {
>+ vndev = rmnet_vnd_get_by_id(i);
>+ if (!vndev) {
>+ LOGL("VND %d not in use; skipping", i);
>+ continue;
>+ }
>+ cfg = rmnet_vnd_get_le_config(vndev);
>+ if (!cfg) {
>+ LOGH("Got NULL config from VND %d", i);
>+ continue;
>+ }
>+ if (cfg->refcount && (cfg->egress_dev == dev)) {
>+ /* Make sure the device is down before clearing any of
>+ * the mappings. Otherwise we could see a potential
>+ * race condition if packets are actively being
>+ * transmitted.
>+ */
>+ dev_close(vndev);
>+ rmnet_unset_logical_endpoint_config
>+ (vndev, RMNET_LOCAL_LOGICAL_ENDPOINT);
>+ vnd_work->vnd_id[j] = i;
>+ j++;
>+ }
>+ }
>+ if (j > 0) {
>+ vnd_work->count = j;
>+ schedule_work(&vnd_work->work);
>+ } else {
>+ kfree(vnd_work);
>+ }
>+
>+ /* Clear the mappings on the phys ep */
>+ trace_rmnet_unregister_cb_clear_lepcs(dev);
>+ rmnet_unset_logical_endpoint_config(dev, RMNET_LOCAL_LOGICAL_ENDPOINT);
>+ for (i = 0; i < RMNET_DATA_MAX_LOGICAL_EP; i++)
>+ rmnet_unset_logical_endpoint_config(dev, i);
>+ rmnet_unassociate_network_device(dev);
>+}
>+
>+/* rmnet_config_notify_cb() - Callback for netdevice notifier chain
>+ * @nb: Notifier block data
>+ * @event: Netdevice notifier event ID
>+ * @data: Contains a net device for which we are getting notified
>+ *
>+ * Return:
>+ * - result of NOTIFY_DONE()
>+ */
>+int rmnet_config_notify_cb(struct notifier_block *nb,
>+ unsigned long event, void *data)
>+{
>+ struct net_device *dev = netdev_notifier_info_to_dev(data);
>+
>+ if (!dev)
>+ return NOTIFY_DONE;
>+
>+ switch (event) {
>+ case NETDEV_UNREGISTER_FINAL:
>+ case NETDEV_UNREGISTER:
>+ trace_rmnet_unregister_cb_entry(dev);
>+ LOGH("Kernel is trying to unregister %s", dev->name);
>+ rmnet_force_unassociate_device(dev);
>+ trace_rmnet_unregister_cb_exit(dev);
>+ break;
>+
>+ default:
>+ trace_rmnet_unregister_cb_unhandled(dev);
>+ LOGD("Unhandeled event [%lu]", event);
>+ break;
>+ }
>+
>+ return NOTIFY_DONE;
>+}
>diff --git a/net/rmnet_data/rmnet_data_config.h b/net/rmnet_data/rmnet_data_config.h
>new file mode 100644
>index 0000000..f9da3c6
>--- /dev/null
>+++ b/net/rmnet_data/rmnet_data_config.h
>@@ -0,0 +1,107 @@
>+/* Copyright (c) 2013-2014, 2016-2017 The Linux Foundation. All rights reserved.
>+ *
>+ * This program is free software; you can redistribute it and/or modify
>+ * it under the terms of the GNU General Public License version 2 and
>+ * only version 2 as published by the Free Software Foundation.
>+ *
>+ * This program is distributed in the hope that it will be useful,
>+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
>+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>+ * GNU General Public License for more details.
>+ *
>+ * RMNET Data configuration engine
>+ *
>+ */
>+
>+#include <linux/types.h>
>+#include <linux/time.h>
>+#include <linux/skbuff.h>
>+
>+#ifndef _RMNET_DATA_CONFIG_H_
>+#define _RMNET_DATA_CONFIG_H_
>+
>+#define RMNET_DATA_MAX_LOGICAL_EP 256
>+
>+/* struct rmnet_logical_ep_conf_s - Logical end-point configuration
>+ *
>+ * @refcount: Reference count for this endpoint. 0 signifies the endpoint is not
>+ * configured for use
>+ * @rmnet_mode: Specifies how the traffic should be finally delivered. Possible
>+ * options are available in enum rmnet_config_endpoint_modes_e
>+ * @mux_id: Virtual channel ID used by MAP protocol
>+ * @egress_dev: Next device to deliver the packet to. Exact usage of this
>+ * parmeter depends on the rmnet_mode
>+ */
>+struct rmnet_logical_ep_conf_s {
>+ u8 refcount;
>+ u8 rmnet_mode;
>+ u8 mux_id;
>+ struct timespec flush_time;
>+ struct net_device *egress_dev;
>+};
>+
>+/* struct rmnet_phys_ep_conf_s - Physical endpoint configuration
>+ * One instance of this structure is instantiated for each net_device associated
>+ * with rmnet_data.
>+ *
>+ * @dev: The device which is associated with rmnet_data. Corresponds to this
>+ * specific instance of rmnet_phys_ep_conf_s
>+ * @local_ep: Default non-muxed endpoint. Used for non-MAP protocols/formats
>+ * @muxed_ep: All multiplexed logical endpoints associated with this device
>+ * @ingress_data_format: RMNET_INGRESS_FORMAT_* flags from rmnet_data.h
>+ * @egress_data_format: RMNET_EGRESS_FORMAT_* flags from rmnet_data.h
>+ *
>+ * @egress_agg_size: Maximum size (bytes) of data which should be aggregated
>+ * @egress_agg_count: Maximum count (packets) of data which should be aggregated
>+ * Smaller of the two parameters above are chosen for
>+ * aggregation
>+ * @tail_spacing: Guaranteed padding (bytes) when de-aggregating ingress frames
>+ * @agg_time: Wall clock time when aggregated frame was created
>+ * @agg_last: Last time the aggregation routing was invoked
>+ */
>+struct rmnet_phys_ep_conf_s {
>+ struct net_device *dev;
>+ struct rmnet_logical_ep_conf_s local_ep;
>+ struct rmnet_logical_ep_conf_s muxed_ep[RMNET_DATA_MAX_LOGICAL_EP];
>+ u32 ingress_data_format;
>+ u32 egress_data_format;
>+};
>+
>+int rmnet_config_init(void);
>+void rmnet_config_exit(void);
>+
>+int rmnet_unassociate_network_device(struct net_device *dev);
>+int rmnet_set_ingress_data_format(struct net_device *dev,
>+ u32 ingress_data_format);
>+int rmnet_set_egress_data_format(struct net_device *dev,
>+ u32 egress_data_format,
>+ u16 agg_size,
>+ u16 agg_count);
>+int rmnet_associate_network_device(struct net_device *dev);
>+int _rmnet_set_logical_endpoint_config(struct net_device *dev,
>+ int config_id,
>+ struct rmnet_logical_ep_conf_s *epconfig);
>+int rmnet_set_logical_endpoint_config(struct net_device *dev,
>+ int config_id,
>+ u8 rmnet_mode,
>+ struct net_device *egress_dev);
>+int _rmnet_unset_logical_endpoint_config(struct net_device *dev,
>+ int config_id);
>+int rmnet_unset_logical_endpoint_config(struct net_device *dev,
>+ int config_id);
>+int _rmnet_get_logical_endpoint_config(struct net_device *dev,
>+ int config_id,
>+ struct rmnet_logical_ep_conf_s *epconfig);
>+int rmnet_get_logical_endpoint_config(struct net_device *dev,
>+ int config_id,
>+ u8 *rmnet_mode,
>+ u8 *egress_dev_name,
>+ size_t egress_dev_name_size);
>+void rmnet_config_netlink_msg_handler (struct sk_buff *skb);
>+int rmnet_config_notify_cb(struct notifier_block *nb,
>+ unsigned long event, void *data);
>+int rmnet_create_vnd(int id);
>+int rmnet_create_vnd_prefix(int id, const char *name);
>+int rmnet_free_vnd(int id);
>+
>+#endif /* _RMNET_DATA_CONFIG_H_ */
>diff --git a/net/rmnet_data/rmnet_data_handlers.c b/net/rmnet_data/rmnet_data_handlers.c
>new file mode 100644
>index 0000000..e95d1ef
>--- /dev/null
>+++ b/net/rmnet_data/rmnet_data_handlers.c
>@@ -0,0 +1,556 @@
>+/* Copyright (c) 2013-2017, The Linux Foundation. All rights reserved.
>+ *
>+ * This program is free software; you can redistribute it and/or modify
>+ * it under the terms of the GNU General Public License version 2 and
>+ * only version 2 as published by the Free Software Foundation.
>+ *
>+ * This program is distributed in the hope that it will be useful,
>+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
>+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>+ * GNU General Public License for more details.
>+ *
>+ * RMNET Data ingress/egress handler
>+ *
>+ */
>+
>+#include <linux/skbuff.h>
>+#include <linux/netdevice.h>
>+#include <linux/module.h>
>+#include <linux/rmnet_data.h>
>+#include <linux/netdev_features.h>
>+#include <linux/ip.h>
>+#include <linux/ipv6.h>
>+#include "rmnet_data_private.h"
>+#include "rmnet_data_config.h"
>+#include "rmnet_data_vnd.h"
>+#include "rmnet_map.h"
>+#include "rmnet_data_stats.h"
>+#include "rmnet_data_trace.h"
>+#include "rmnet_data_handlers.h"
>+
>+RMNET_LOG_MODULE(RMNET_DATA_LOGMASK_HANDLER);
>+
>+#ifdef CONFIG_RMNET_DATA_DEBUG
>+unsigned int dump_pkt_rx;
>+module_param(dump_pkt_rx, uint, 0644);
>+MODULE_PARM_DESC(dump_pkt_rx, "Dump packets entering ingress handler");
>+
>+unsigned int dump_pkt_tx;
>+module_param(dump_pkt_tx, uint, 0644);
>+MODULE_PARM_DESC(dump_pkt_tx, "Dump packets exiting egress handler");
>+#endif /* CONFIG_RMNET_DATA_DEBUG */
>+
>+#define RMNET_DATA_IP_VERSION_4 0x40
>+#define RMNET_DATA_IP_VERSION_6 0x60
>+
>+/* Helper Functions */
>+
>+/* __rmnet_data_set_skb_proto() - Set skb->protocol field
>+ * @skb: packet being modified
>+ *
>+ * Peek at the first byte of the packet and set the protocol. There is not
>+ * good way to determine if a packet has a MAP header. As of writing this,
>+ * the reserved bit in the MAP frame will prevent it from overlapping with
>+ * IPv4/IPv6 frames. This could change in the future!
>+ */
>+static inline void __rmnet_data_set_skb_proto(struct sk_buff *skb)
>+{
>+ switch (skb->data[0] & 0xF0) {
>+ case RMNET_DATA_IP_VERSION_4:
>+ skb->protocol = htons(ETH_P_IP);
>+ break;
>+ case RMNET_DATA_IP_VERSION_6:
>+ skb->protocol = htons(ETH_P_IPV6);
>+ break;
>+ default:
>+ skb->protocol = htons(ETH_P_MAP);
>+ break;
>+ }
>+}
>+
>+#ifdef CONFIG_RMNET_DATA_DEBUG
>+/* rmnet_print_packet() - Print packet / diagnostics
>+ * @skb: Packet to print
>+ * @printlen: Number of bytes to print
>+ * @dev: Name of interface
>+ * @dir: Character representing direction (e.g.. 'r' for receive)
>+ *
>+ * This function prints out raw bytes in an SKB. Use of this will have major
>+ * performance impacts and may even trigger watchdog resets if too much is being
>+ * printed. Hence, this should always be compiled out unless absolutely needed.
>+ */
>+void rmnet_print_packet(const struct sk_buff *skb, const char *dev, char dir)
>+{
>+ char buffer[200];
>+ unsigned int len, printlen;
>+ int i, buffloc = 0;
>+
>+ switch (dir) {
>+ case 'r':
>+ printlen = dump_pkt_rx;
>+ break;
>+
>+ case 't':
>+ printlen = dump_pkt_tx;
>+ break;
>+
>+ default:
>+ printlen = 0;
>+ break;
>+ }
>+
>+ if (!printlen)
>+ return;
>+
>+ pr_err("[%s][%c] - PKT skb->len=%d skb->head=%pK skb->data=%pK\n",
>+ dev, dir, skb->len, (void *)skb->head, (void *)skb->data);
>+ pr_err("[%s][%c] - PKT skb->tail=%pK skb->end=%pK\n",
>+ dev, dir, skb_tail_pointer(skb), skb_end_pointer(skb));
>+
>+ if (skb->len > 0)
>+ len = skb->len;
>+ else
>+ len = ((unsigned int)(uintptr_t)skb->end) -
>+ ((unsigned int)(uintptr_t)skb->data);
>+
>+ pr_err("[%s][%c] - PKT len: %d, printing first %d bytes\n",
>+ dev, dir, len, printlen);
>+
>+ memset(buffer, 0, sizeof(buffer));
>+ for (i = 0; (i < printlen) && (i < len); i++) {
>+ if ((i % 16) == 0) {
>+ pr_err("[%s][%c] - PKT%s\n", dev, dir, buffer);
>+ memset(buffer, 0, sizeof(buffer));
>+ buffloc = 0;
>+ buffloc += snprintf(&buffer[buffloc],
>+ sizeof(buffer) - buffloc, "%04X:",
>+ i);
>+ }
>+
>+ buffloc += snprintf(&buffer[buffloc], sizeof(buffer) - buffloc,
>+ " %02x", skb->data[i]);
>+ }
>+ pr_err("[%s][%c] - PKT%s\n", dev, dir, buffer);
>+}
>+#else
>+void rmnet_print_packet(const struct sk_buff *skb, const char *dev, char dir)
>+{
>+}
>+#endif /* CONFIG_RMNET_DATA_DEBUG */
>+
>+/* Generic handler */
>+
>+/* rmnet_bridge_handler() - Bridge related functionality
>+ *
>+ * Return:
>+ * - RX_HANDLER_CONSUMED in all cases
>+ */
>+static rx_handler_result_t rmnet_bridge_handler
>+ (struct sk_buff *skb, struct rmnet_logical_ep_conf_s *ep)
>+{
>+ if (!ep->egress_dev) {
>+ LOGD("Missing egress device for packet arriving on %s",
>+ skb->dev->name);
>+ rmnet_kfree_skb(skb, RMNET_STATS_SKBFREE_BRDG_NO_EGRESS);
>+ } else {
>+ rmnet_egress_handler(skb, ep);
>+ }
>+
>+ return RX_HANDLER_CONSUMED;
>+}
>+
>+#ifdef NET_SKBUFF_DATA_USES_OFFSET
>+static void rmnet_reset_mac_header(struct sk_buff *skb)
>+{
>+ skb->mac_header = 0;
>+ skb->mac_len = 0;
>+}
>+#else
>+static void rmnet_reset_mac_header(struct sk_buff *skb)
>+{
>+ skb->mac_header = skb->network_header;
>+ skb->mac_len = 0;
>+}
>+#endif /*NET_SKBUFF_DATA_USES_OFFSET*/
>+
>+/* __rmnet_deliver_skb() - Deliver skb
>+ *
>+ * Determines where to deliver skb. Options are: consume by network stack,
>+ * pass to bridge handler, or pass to virtual network device
>+ *
>+ * Return:
>+ * - RX_HANDLER_CONSUMED if packet forwarded or dropped
>+ * - RX_HANDLER_PASS if packet is to be consumed by network stack as-is
>+ */
>+static rx_handler_result_t __rmnet_deliver_skb
>+ (struct sk_buff *skb, struct rmnet_logical_ep_conf_s *ep)
>+{
>+ trace___rmnet_deliver_skb(skb);
>+ switch (ep->rmnet_mode) {
>+ case RMNET_EPMODE_NONE:
>+ return RX_HANDLER_PASS;
>+
>+ case RMNET_EPMODE_BRIDGE:
>+ return rmnet_bridge_handler(skb, ep);
>+
>+ case RMNET_EPMODE_VND:
>+ skb_reset_transport_header(skb);
>+ skb_reset_network_header(skb);
>+ switch (rmnet_vnd_rx_fixup(skb, skb->dev)) {
>+ case RX_HANDLER_CONSUMED:
>+ return RX_HANDLER_CONSUMED;
>+
>+ case RX_HANDLER_PASS:
>+ skb->pkt_type = PACKET_HOST;
>+ rmnet_reset_mac_header(skb);
>+ netif_receive_skb(skb);
>+ return RX_HANDLER_CONSUMED;
>+ }
>+ return RX_HANDLER_PASS;
>+
>+ default:
>+ LOGD("Unknown ep mode %d", ep->rmnet_mode);
>+ rmnet_kfree_skb(skb, RMNET_STATS_SKBFREE_DELIVER_NO_EP);
>+ return RX_HANDLER_CONSUMED;
>+ }
>+}
>+
>+/* rmnet_ingress_deliver_packet() - Ingress handler for raw IP and bridged
>+ * MAP packets.
>+ * @skb: Packet needing a destination.
>+ * @config: Physical end point configuration that the packet arrived on.
>+ *
>+ * Return:
>+ * - RX_HANDLER_CONSUMED if packet forwarded/dropped
>+ * - RX_HANDLER_PASS if packet should be passed up the stack by caller
>+ */
>+static rx_handler_result_t rmnet_ingress_deliver_packet
>+ (struct sk_buff *skb, struct rmnet_phys_ep_conf_s *config)
>+{
>+ if (!config) {
>+ LOGD("%s", "NULL physical EP provided");
>+ kfree_skb(skb);
>+ return RX_HANDLER_CONSUMED;
>+ }
>+
>+ if (!(config->local_ep.refcount)) {
>+ LOGD("Packet on %s has no local endpoint configuration",
>+ skb->dev->name);
>+ rmnet_kfree_skb(skb, RMNET_STATS_SKBFREE_IPINGRESS_NO_EP);
>+ return RX_HANDLER_CONSUMED;
>+ }
>+
>+ skb->dev = config->local_ep.egress_dev;
>+
>+ return __rmnet_deliver_skb(skb, &config->local_ep);
>+}
>+
>+/* MAP handler */
>+
>+/* _rmnet_map_ingress_handler() - Actual MAP ingress handler
>+ * @skb: Packet being received
>+ * @config: Physical endpoint configuration for the ingress device
>+ *
>+ * Most MAP ingress functions are processed here. Packets are processed
>+ * individually; aggregated packets should use rmnet_map_ingress_handler()
>+ *
>+ * Return:
>+ * - RX_HANDLER_CONSUMED if packet is dropped
>+ * - result of __rmnet_deliver_skb() for all other cases
>+ */
>+static rx_handler_result_t _rmnet_map_ingress_handler
>+ (struct sk_buff *skb, struct rmnet_phys_ep_conf_s *config)
>+{
>+ struct rmnet_logical_ep_conf_s *ep;
>+ u8 mux_id;
>+ u16 len;
>+
>+ if (RMNET_MAP_GET_CD_BIT(skb)) {
>+ if (config->ingress_data_format
>+ & RMNET_INGRESS_FORMAT_MAP_COMMANDS)
>+ return rmnet_map_command(skb, config);
>+
>+ LOGM("MAP command packet on %s; %s", skb->dev->name,
>+ "Not configured for MAP commands");
>+ rmnet_kfree_skb(skb,
>+ RMNET_STATS_SKBFREE_INGRESS_NOT_EXPECT_MAPC);
>+ return RX_HANDLER_CONSUMED;
>+ }
>+
>+ mux_id = RMNET_MAP_GET_MUX_ID(skb);
>+ len = RMNET_MAP_GET_LENGTH(skb) - RMNET_MAP_GET_PAD(skb);
>+
>+ if (mux_id >= RMNET_DATA_MAX_LOGICAL_EP) {
>+ LOGD("Got packet on %s with bad mux id %d",
>+ skb->dev->name, mux_id);
>+ rmnet_kfree_skb(skb, RMNET_STATS_SKBFREE_MAPINGRESS_BAD_MUX);
>+ return RX_HANDLER_CONSUMED;
>+ }
>+
>+ ep = &config->muxed_ep[mux_id];
>+
>+ if (!ep->refcount) {
>+ LOGD("Packet on %s:%d; has no logical endpoint config",
>+ skb->dev->name, mux_id);
>+
>+ rmnet_kfree_skb(skb, RMNET_STATS_SKBFREE_MAPINGRESS_MUX_NO_EP);
>+ return RX_HANDLER_CONSUMED;
>+ }
>+
>+ if (config->ingress_data_format & RMNET_INGRESS_FORMAT_DEMUXING)
>+ skb->dev = ep->egress_dev;
>+
>+ /* Subtract MAP header */
>+ skb_pull(skb, sizeof(struct rmnet_map_header_s));
>+ skb_trim(skb, len);
>+ __rmnet_data_set_skb_proto(skb);
>+ return __rmnet_deliver_skb(skb, ep);
>+}
>+
>+/* rmnet_map_ingress_handler() - MAP ingress handler
>+ * @skb: Packet being received
>+ * @config: Physical endpoint configuration for the ingress device
>+ *
>+ * Called if and only if MAP is configured in the ingress device's ingress data
>+ * format. Deaggregation is done here, actual MAP processing is done in
>+ * _rmnet_map_ingress_handler().
>+ *
>+ * Return:
>+ * - RX_HANDLER_CONSUMED for aggregated packets
>+ * - RX_HANDLER_CONSUMED for dropped packets
>+ * - result of _rmnet_map_ingress_handler() for all other cases
>+ */
>+static rx_handler_result_t rmnet_map_ingress_handler
>+ (struct sk_buff *skb, struct rmnet_phys_ep_conf_s *config)
>+{
>+ struct sk_buff *skbn;
>+ int rc, co = 0;
>+
>+ if (config->ingress_data_format & RMNET_INGRESS_FORMAT_DEAGGREGATION) {
>+ trace_rmnet_start_deaggregation(skb);
>+ while ((skbn = rmnet_map_deaggregate(skb, config)) != NULL) {
>+ _rmnet_map_ingress_handler(skbn, config);
>+ co++;
>+ }
>+ trace_rmnet_end_deaggregation(skb, co);
>+ LOGD("De-aggregated %d packets", co);
>+ rmnet_stats_deagg_pkts(co);
>+ rmnet_kfree_skb(skb, RMNET_STATS_SKBFREE_MAPINGRESS_AGGBUF);
>+ rc = RX_HANDLER_CONSUMED;
>+ } else {
>+ rc = _rmnet_map_ingress_handler(skb, config);
>+ }
>+
>+ return rc;
>+}
>+
>+/* rmnet_map_egress_handler() - MAP egress handler
>+ * @skb: Packet being sent
>+ * @config: Physical endpoint configuration for the egress device
>+ * @ep: logical endpoint configuration of the packet originator
>+ * (e.g.. RmNet virtual network device)
>+ * @orig_dev: The originator vnd device
>+ *
>+ * Called if and only if MAP is configured in the egress device's egress data
>+ * format. Will expand skb if there is insufficient headroom for MAP protocol.
>+ * Note: headroomexpansion will incur a performance penalty.
>+ *
>+ * Return:
>+ * - 0 on success
>+ * - 1 on failure
>+ */
>+static int rmnet_map_egress_handler(struct sk_buff *skb,
>+ struct rmnet_phys_ep_conf_s *config,
>+ struct rmnet_logical_ep_conf_s *ep,
>+ struct net_device *orig_dev)
>+{
>+ int required_headroom, additional_header_length;
>+ struct rmnet_map_header_s *map_header;
>+
>+ additional_header_length = 0;
>+ required_headroom = sizeof(struct rmnet_map_header_s);
>+
>+ LOGD("headroom of %d bytes", required_headroom);
>+
>+ if (skb_headroom(skb) < required_headroom) {
>+ if (pskb_expand_head(skb, required_headroom, 0, GFP_KERNEL)) {
>+ LOGD("Failed to add headroom of %d bytes",
>+ required_headroom);
>+ return RMNET_MAP_CONSUMED;
>+ }
>+ }
>+
>+ map_header = rmnet_map_add_map_header
>+ (skb, additional_header_length, RMNET_MAP_NO_PAD_BYTES);
>+
>+ if (!map_header) {
>+ LOGD("%s", "Failed to add MAP header to egress packet");
>+ return RMNET_MAP_CONSUMED;
>+ }
>+
>+ if (config->egress_data_format & RMNET_EGRESS_FORMAT_MUXING) {
>+ if (ep->mux_id == 0xff)
>+ map_header->mux_id = 0;
>+ else
>+ map_header->mux_id = ep->mux_id;
>+ }
>+
>+ skb->protocol = htons(ETH_P_MAP);
>+
>+ return RMNET_MAP_SUCCESS;
>+}
>+
>+/* Ingress / Egress Entry Points */
>+
>+/* rmnet_ingress_handler() - Ingress handler entry point
>+ * @skb: Packet being received
>+ *
>+ * Processes packet as per ingress data format for receiving device. Logical
>+ * endpoint is determined from packet inspection. Packet is then sent to the
>+ * egress device listed in the logical endpoint configuration.
>+ *
>+ * Return:
>+ * - RX_HANDLER_PASS if packet is not processed by handler (caller must
>+ * deal with the packet)
>+ * - RX_HANDLER_CONSUMED if packet is forwarded or processed by MAP
>+ */
>+rx_handler_result_t rmnet_ingress_handler(struct sk_buff *skb)
>+{
>+ struct rmnet_phys_ep_conf_s *config;
>+ struct net_device *dev;
>+ int rc;
>+
>+ if (!skb)
>+ return RX_HANDLER_CONSUMED;
>+
>+ dev = skb->dev;
>+ trace_rmnet_ingress_handler(skb);
>+ rmnet_print_packet(skb, dev->name, 'r');
>+
>+ config = (struct rmnet_phys_ep_conf_s *)
>+ rcu_dereference(skb->dev->rx_handler_data);
>+
>+ if (!config) {
>+ LOGD("%s is not associated with rmnet_data", skb->dev->name);
>+ kfree_skb(skb);
>+ return RX_HANDLER_CONSUMED;
>+ }
>+
>+ /* Sometimes devices operate in ethernet mode even thouth there is no
>+ * ethernet header. This causes the skb->protocol to contain a bogus
>+ * value and the skb->data pointer to be off by 14 bytes. Fix it if
>+ * configured to do so
>+ */
>+ if (config->ingress_data_format & RMNET_INGRESS_FIX_ETHERNET) {
>+ skb_push(skb, RMNET_ETHERNET_HEADER_LENGTH);
>+ __rmnet_data_set_skb_proto(skb);
>+ }
>+
>+ if (config->ingress_data_format & RMNET_INGRESS_FORMAT_MAP) {
>+ rc = rmnet_map_ingress_handler(skb, config);
>+ } else {
>+ switch (ntohs(skb->protocol)) {
>+ case ETH_P_MAP:
>+ if (config->local_ep.rmnet_mode ==
>+ RMNET_EPMODE_BRIDGE) {
>+ rc = rmnet_ingress_deliver_packet(skb, config);
>+ } else {
>+ LOGD("MAP packet on %s; MAP not set",
>+ dev->name);
>+ rmnet_kfree_skb
>+ (skb,
>+ RMNET_STATS_SKBFREE_INGRESS_NOT_EXPECT_MAPD);
>+ rc = RX_HANDLER_CONSUMED;
>+ }
>+ break;
>+
>+ case ETH_P_ARP:
>+ case ETH_P_IP:
>+ case ETH_P_IPV6:
>+ rc = rmnet_ingress_deliver_packet(skb, config);
>+ break;
>+
>+ default:
>+ LOGD("Unknown skb->proto 0x%04X\n",
>+ ntohs(skb->protocol) & 0xFFFF);
>+ rc = RX_HANDLER_PASS;
>+ }
>+ }
>+
>+ return rc;
>+}
>+
>+/* rmnet_rx_handler() - Rx handler callback registered with kernel
>+ * @pskb: Packet to be processed by rx handler
>+ *
>+ * Standard kernel-expected footprint for rx handlers. Calls
>+ * rmnet_ingress_handler with correctly formatted arguments
>+ *
>+ * Return:
>+ * - Whatever rmnet_ingress_handler() returns
>+ */
>+rx_handler_result_t rmnet_rx_handler(struct sk_buff **pskb)
>+{
>+ return rmnet_ingress_handler(*pskb);
>+}
>+
>+/* rmnet_egress_handler() - Egress handler entry point
>+ * @skb: packet to transmit
>+ * @ep: logical endpoint configuration of the packet originator
>+ * (e.g.. RmNet virtual network device)
>+ *
>+ * Modifies packet as per logical endpoint configuration and egress data format
>+ * for egress device configured in logical endpoint. Packet is then transmitted
>+ * on the egress device.
>+ */
>+void rmnet_egress_handler(struct sk_buff *skb,
>+ struct rmnet_logical_ep_conf_s *ep)
>+{
>+ struct rmnet_phys_ep_conf_s *config;
>+ struct net_device *orig_dev;
>+ int rc;
>+
>+ orig_dev = skb->dev;
>+ skb->dev = ep->egress_dev;
>+
>+ config = (struct rmnet_phys_ep_conf_s *)
>+ rcu_dereference(skb->dev->rx_handler_data);
>+
>+ if (!config) {
>+ LOGD("%s is not associated with rmnet_data", skb->dev->name);
>+ kfree_skb(skb);
>+ return;
>+ }
>+
>+ LOGD("Packet going out on %s with egress format 0x%08X",
>+ skb->dev->name, config->egress_data_format);
>+
>+ if (config->egress_data_format & RMNET_EGRESS_FORMAT_MAP) {
>+ switch (rmnet_map_egress_handler(skb, config, ep, orig_dev)) {
>+ case RMNET_MAP_CONSUMED:
>+ LOGD("%s", "MAP process consumed packet");
>+ return;
>+
>+ case RMNET_MAP_SUCCESS:
>+ break;
>+
>+ default:
>+ LOGD("MAP egress failed on packet on %s",
>+ skb->dev->name);
>+ rmnet_kfree_skb(skb, RMNET_STATS_SKBFREE_EGR_MAPFAIL);
>+ return;
>+ }
>+ }
>+
>+ if (ep->rmnet_mode == RMNET_EPMODE_VND)
>+ rmnet_vnd_tx_fixup(skb, orig_dev);
>+
>+ rmnet_print_packet(skb, skb->dev->name, 't');
>+ trace_rmnet_egress_handler(skb);
>+ rc = dev_queue_xmit(skb);
>+ if (rc != 0) {
>+ LOGD("Failed to queue packet for transmission on [%s]",
>+ skb->dev->name);
>+ }
>+ rmnet_stats_queue_xmit(rc, RMNET_STATS_QUEUE_XMIT_EGRESS);
>+}
>diff --git a/net/rmnet_data/rmnet_data_handlers.h b/net/rmnet_data/rmnet_data_handlers.h
>new file mode 100644
>index 0000000..85a590c
>--- /dev/null
>+++ b/net/rmnet_data/rmnet_data_handlers.h
>@@ -0,0 +1,24 @@
>+/* Copyright (c) 2013, 2016-2017 The Linux Foundation. All rights reserved.
>+ *
>+ * This program is free software; you can redistribute it and/or modify
>+ * it under the terms of the GNU General Public License version 2 and
>+ * only version 2 as published by the Free Software Foundation.
>+ *
>+ * This program is distributed in the hope that it will be useful,
>+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
>+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>+ * GNU General Public License for more details.
>+ *
>+ * RMNET Data ingress/egress handler
>+ *
>+ */
>+
>+#ifndef _RMNET_DATA_HANDLERS_H_
>+#define _RMNET_DATA_HANDLERS_H_
>+
>+void rmnet_egress_handler(struct sk_buff *skb,
>+ struct rmnet_logical_ep_conf_s *ep);
>+
>+rx_handler_result_t rmnet_rx_handler(struct sk_buff **pskb);
>+
>+#endif /* _RMNET_DATA_HANDLERS_H_ */
>diff --git a/net/rmnet_data/rmnet_data_main.c b/net/rmnet_data/rmnet_data_main.c
>new file mode 100644
>index 0000000..f0e1ec6
>--- /dev/null
>+++ b/net/rmnet_data/rmnet_data_main.c
>@@ -0,0 +1,60 @@
>+/* Copyright (c) 2013-2014, 2016-2017 The Linux Foundation. All rights reserved.
>+ *
>+ * This program is free software; you can redistribute it and/or modify
>+ * it under the terms of the GNU General Public License version 2 and
>+ * only version 2 as published by the Free Software Foundation.
>+ *
>+ * This program is distributed in the hope that it will be useful,
>+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
>+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>+ * GNU General Public License for more details.
>+ *
>+ *
>+ * RMNET Data generic framework
>+ *
>+ */
>+
>+#include <linux/module.h>
>+#include <linux/kernel.h>
>+#include <linux/export.h>
>+#include "rmnet_data_private.h"
>+#include "rmnet_data_config.h"
>+#include "rmnet_data_vnd.h"
>+
>+/* Trace Points */
>+#define CREATE_TRACE_POINTS
>+#include "rmnet_data_trace.h"
>+
>+/* Module Parameters */
>+unsigned int rmnet_data_log_level = RMNET_LOG_LVL_ERR | RMNET_LOG_LVL_HI;
>+module_param(rmnet_data_log_level, uint, 0644);
>+MODULE_PARM_DESC(log_level, "Logging level");
>+
>+unsigned int rmnet_data_log_module_mask;
>+module_param(rmnet_data_log_module_mask, uint, 0644);
>+MODULE_PARM_DESC(rmnet_data_log_module_mask, "Logging module mask");
No module parameters, ever!
>+
>+/* Startup/Shutdown */
>+
>+/* rmnet_init() - Module initialization
>+ *
>+ * todo: check for (and init) startup errors
>+ */
>+static int __init rmnet_init(void)
>+{
>+ rmnet_config_init();
>+ rmnet_vnd_init();
>+
>+ LOGL("%s", "RMNET Data driver loaded successfully");
>+ return 0;
>+}
>+
>+static void __exit rmnet_exit(void)
>+{
>+ rmnet_config_exit();
>+ rmnet_vnd_exit();
>+}
>+
>+module_init(rmnet_init)
>+module_exit(rmnet_exit)
>+MODULE_LICENSE("GPL v2");
>diff --git a/net/rmnet_data/rmnet_data_private.h b/net/rmnet_data/rmnet_data_private.h
>new file mode 100644
>index 0000000..1dfddc1
>--- /dev/null
>+++ b/net/rmnet_data/rmnet_data_private.h
>@@ -0,0 +1,76 @@
>+/* Copyright (c) 2013-2014, 2016-2017 The Linux Foundation. All rights reserved.
>+ *
>+ * This program is free software; you can redistribute it and/or modify
>+ * it under the terms of the GNU General Public License version 2 and
>+ * only version 2 as published by the Free Software Foundation.
>+ *
>+ * This program is distributed in the hope that it will be useful,
>+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
>+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>+ * GNU General Public License for more details.
>+ */
>+
>+#ifndef _RMNET_DATA_PRIVATE_H_
>+#define _RMNET_DATA_PRIVATE_H_
>+
>+#define RMNET_DATA_MAX_VND 32
>+#define RMNET_DATA_MAX_PACKET_SIZE 16384
>+#define RMNET_DATA_DFLT_PACKET_SIZE 1500
>+#define RMNET_DATA_DEV_NAME_STR "rmnet_data"
>+#define RMNET_DATA_NEEDED_HEADROOM 16
>+#define RMNET_DATA_TX_QUEUE_LEN 1000
>+#define RMNET_ETHERNET_HEADER_LENGTH 14
>+
>+extern unsigned int rmnet_data_log_level;
>+extern unsigned int rmnet_data_log_module_mask;
>+
>+#define RMNET_INIT_OK 0
>+#define RMNET_INIT_ERROR 1
>+
>+#define RMNET_LOG_LVL_DBG BIT(4)
>+#define RMNET_LOG_LVL_LOW BIT(3)
>+#define RMNET_LOG_LVL_MED BIT(2)
>+#define RMNET_LOG_LVL_HI BIT(1)
>+#define RMNET_LOG_LVL_ERR BIT(0)
>+
>+#define RMNET_LOG_MODULE(X) \
>+ static u32 rmnet_mod_mask = X
>+
>+#define RMNET_DATA_LOGMASK_CONFIG BIT(0)
>+#define RMNET_DATA_LOGMASK_HANDLER BIT(1)
>+#define RMNET_DATA_LOGMASK_VND BIT(2)
>+#define RMNET_DATA_LOGMASK_MAPD BIT(3)
>+#define RMNET_DATA_LOGMASK_MAPC BIT(4)
>+
>+#define LOGE(fmt, ...) do { if (rmnet_data_log_level & RMNET_LOG_LVL_ERR) \
>+ pr_err("[RMNET:ERR] %s(): " fmt "\n", __func__, \
>+ ##__VA_ARGS__); \
>+ } while (0)
>+
>+#define LOGH(fmt, ...) do { if (rmnet_data_log_level & RMNET_LOG_LVL_HI) \
>+ pr_err("[RMNET:HI] %s(): " fmt "\n", __func__, \
>+ ##__VA_ARGS__); \
>+ } while (0)
>+
>+#define LOGM(fmt, ...) do { if (rmnet_data_log_level & RMNET_LOG_LVL_MED) \
>+ pr_warn("[RMNET:MED] %s(): " fmt "\n", __func__, \
>+ ##__VA_ARGS__); \
>+ } while (0)
>+
>+#define LOGL(fmt, ...) do { if (unlikely \
>+ (rmnet_data_log_level & RMNET_LOG_LVL_LOW)) \
>+ pr_notice("[RMNET:LOW] %s(): " fmt "\n", __func__, \
>+ ##__VA_ARGS__); \
>+ } while (0)
>+
>+/* Don't use pr_debug as it is compiled out of the kernel. We can be sure of
>+ * minimal impact as LOGD is not enabled by default.
>+ */
>+#define LOGD(fmt, ...) do { if (unlikely( \
>+ (rmnet_data_log_level & RMNET_LOG_LVL_DBG) &&\
>+ (rmnet_data_log_module_mask & rmnet_mod_mask))) \
>+ pr_notice("[RMNET:DBG] %s(): " fmt "\n", __func__, \
>+ ##__VA_ARGS__); \
Loose this wrappers, use pr_* directly.
>+ } while (0)
>+
>+#endif /* _RMNET_DATA_PRIVATE_H_ */
>diff --git a/net/rmnet_data/rmnet_data_stats.c b/net/rmnet_data/rmnet_data_stats.c
>new file mode 100644
>index 0000000..4bf7a72
>--- /dev/null
>+++ b/net/rmnet_data/rmnet_data_stats.c
>@@ -0,0 +1,86 @@
>+/* Copyright (c) 2014, 2016-2017 The Linux Foundation. All rights reserved.
>+ *
>+ * This program is free software; you can redistribute it and/or modify
>+ * it under the terms of the GNU General Public License version 2 and
>+ * only version 2 as published by the Free Software Foundation.
>+ *
>+ * This program is distributed in the hope that it will be useful,
>+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
>+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>+ * GNU General Public License for more details.
>+ *
>+ *
>+ * RMNET Data statistics
>+ *
>+ */
>+
>+#include <linux/module.h>
>+#include <linux/kernel.h>
>+#include <linux/export.h>
>+#include <linux/skbuff.h>
>+#include <linux/spinlock.h>
>+#include <linux/netdevice.h>
>+#include "rmnet_data_private.h"
>+#include "rmnet_data_stats.h"
>+#include "rmnet_data_config.h"
>+#include "rmnet_map.h"
>+
>+enum rmnet_deagg_e {
>+ RMNET_STATS_AGG_BUFF,
>+ RMNET_STATS_AGG_PKT,
>+ RMNET_STATS_AGG_MAX
>+};
>+
>+static DEFINE_SPINLOCK(rmnet_skb_free_lock);
>+unsigned long int skb_free[RMNET_STATS_SKBFREE_MAX];
>+module_param_array(skb_free, ulong, 0, 0444);
>+MODULE_PARM_DESC(skb_free, "SKBs dropped or freed");
>+
>+static DEFINE_SPINLOCK(rmnet_queue_xmit_lock);
>+unsigned long int queue_xmit[RMNET_STATS_QUEUE_XMIT_MAX * 2];
>+module_param_array(queue_xmit, ulong, 0, 0444);
>+MODULE_PARM_DESC(queue_xmit, "SKBs queued for transmit");
>+
>+static DEFINE_SPINLOCK(rmnet_deagg_count);
>+unsigned long int deagg_count[RMNET_STATS_AGG_MAX];
>+module_param_array(deagg_count, ulong, 0, 0444);
>+MODULE_PARM_DESC(deagg_count, "SKBs De-aggregated");
>+
>+void rmnet_kfree_skb(struct sk_buff *skb, unsigned int reason)
>+{
>+ unsigned long flags;
>+
>+ if (reason >= RMNET_STATS_SKBFREE_MAX)
>+ reason = RMNET_STATS_SKBFREE_UNKNOWN;
>+
>+ spin_lock_irqsave(&rmnet_skb_free_lock, flags);
>+ skb_free[reason]++;
>+ spin_unlock_irqrestore(&rmnet_skb_free_lock, flags);
>+
>+ if (skb)
>+ kfree_skb(skb);
>+}
>+
>+void rmnet_stats_queue_xmit(int rc, unsigned int reason)
>+{
>+ unsigned long flags;
>+
>+ if (rc != 0)
>+ reason += RMNET_STATS_QUEUE_XMIT_MAX;
>+ if (reason >= RMNET_STATS_QUEUE_XMIT_MAX * 2)
>+ reason = RMNET_STATS_SKBFREE_UNKNOWN;
>+
>+ spin_lock_irqsave(&rmnet_queue_xmit_lock, flags);
>+ queue_xmit[reason]++;
>+ spin_unlock_irqrestore(&rmnet_queue_xmit_lock, flags);
>+}
>+
>+void rmnet_stats_deagg_pkts(int aggcount)
>+{
>+ unsigned long flags;
>+
>+ spin_lock_irqsave(&rmnet_deagg_count, flags);
>+ deagg_count[RMNET_STATS_AGG_BUFF]++;
>+ deagg_count[RMNET_STATS_AGG_PKT] += aggcount;
>+ spin_unlock_irqrestore(&rmnet_deagg_count, flags);
>+}
>diff --git a/net/rmnet_data/rmnet_data_stats.h b/net/rmnet_data/rmnet_data_stats.h
>new file mode 100644
>index 0000000..a6f73a2
>--- /dev/null
>+++ b/net/rmnet_data/rmnet_data_stats.h
>@@ -0,0 +1,61 @@
>+/* Copyright (c) 2014, 2016-2017 The Linux Foundation. All rights reserved.
>+ *
>+ * This program is free software; you can redistribute it and/or modify
>+ * it under the terms of the GNU General Public License version 2 and
>+ * only version 2 as published by the Free Software Foundation.
>+ *
>+ * This program is distributed in the hope that it will be useful,
>+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
>+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>+ * GNU General Public License for more details.
>+ *
>+ *
>+ * RMNET Data statistics
>+ *
>+ */
>+
>+#ifndef _RMNET_DATA_STATS_H_
>+#define _RMNET_DATA_STATS_H_
>+
>+enum rmnet_skb_free_e {
>+ RMNET_STATS_SKBFREE_UNKNOWN,
>+ RMNET_STATS_SKBFREE_BRDG_NO_EGRESS,
>+ RMNET_STATS_SKBFREE_DELIVER_NO_EP,
>+ RMNET_STATS_SKBFREE_IPINGRESS_NO_EP,
>+ RMNET_STATS_SKBFREE_MAPINGRESS_BAD_MUX,
>+ RMNET_STATS_SKBFREE_MAPINGRESS_MUX_NO_EP,
>+ RMNET_STATS_SKBFREE_MAPINGRESS_AGGBUF,
>+ RMNET_STATS_SKBFREE_INGRESS_NOT_EXPECT_MAPD,
>+ RMNET_STATS_SKBFREE_INGRESS_NOT_EXPECT_MAPC,
>+ RMNET_STATS_SKBFREE_EGR_MAPFAIL,
>+ RMNET_STATS_SKBFREE_VND_NO_EGRESS,
>+ RMNET_STATS_SKBFREE_MAPC_BAD_MUX,
>+ RMNET_STATS_SKBFREE_MAPC_MUX_NO_EP,
>+ RMNET_STATS_SKBFREE_AGG_CPY_EXPAND,
>+ RMNET_STATS_SKBFREE_AGG_INTO_BUFF,
>+ RMNET_STATS_SKBFREE_DEAGG_MALFORMED,
>+ RMNET_STATS_SKBFREE_DEAGG_CLONE_FAIL,
>+ RMNET_STATS_SKBFREE_DEAGG_UNKNOWN_IP_TYPE,
>+ RMNET_STATS_SKBFREE_DEAGG_DATA_LEN_0,
>+ RMNET_STATS_SKBFREE_INGRESS_BAD_MAP_CKSUM,
>+ RMNET_STATS_SKBFREE_MAPC_UNSUPPORTED,
>+ RMNET_STATS_SKBFREE_MAX
>+};
>+
>+enum rmnet_queue_xmit_e {
>+ RMNET_STATS_QUEUE_XMIT_UNKNOWN,
>+ RMNET_STATS_QUEUE_XMIT_EGRESS,
>+ RMNET_STATS_QUEUE_XMIT_AGG_FILL_BUFFER,
>+ RMNET_STATS_QUEUE_XMIT_AGG_TIMEOUT,
>+ RMNET_STATS_QUEUE_XMIT_AGG_CPY_EXP_FAIL,
>+ RMNET_STATS_QUEUE_XMIT_AGG_SKIP,
>+ RMNET_STATS_QUEUE_XMIT_MAX
>+};
>+
>+void rmnet_kfree_skb(struct sk_buff *skb, unsigned int reason);
>+void rmnet_stats_queue_xmit(int rc, unsigned int reason);
>+void rmnet_stats_deagg_pkts(int aggcount);
>+void rmnet_stats_agg_pkts(int aggcount);
>+void rmnet_stats_dl_checksum(unsigned int rc);
>+void rmnet_stats_ul_checksum(unsigned int rc);
>+#endif /* _RMNET_DATA_STATS_H_ */
>diff --git a/net/rmnet_data/rmnet_data_trace.h b/net/rmnet_data/rmnet_data_trace.h
>new file mode 100644
>index 0000000..264ff61
>--- /dev/null
>+++ b/net/rmnet_data/rmnet_data_trace.h
>@@ -0,0 +1,198 @@
>+/* Copyright (c) 2014-2017, The Linux Foundation. All rights reserved.
>+ *
>+ * This program is free software; you can redistribute it and/or modify
>+ * it under the terms of the GNU General Public License version 2 and
>+ * only version 2 as published by the Free Software Foundation.
>+ *
>+ * This program is distributed in the hope that it will be useful,
>+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
>+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>+ * GNU General Public License for more details.
>+ */
>+
>+#undef TRACE_SYSTEM
>+#define TRACE_SYSTEM rmnet_data
>+#define TRACE_INCLUDE_FILE rmnet_data_trace
>+
>+#if !defined(_RMNET_DATA_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ)
>+#define _RMNET_DATA_TRACE_H_
>+
>+#include <linux/netdevice.h>
>+#include <linux/skbuff.h>
>+#include <linux/tracepoint.h>
>+
>+DECLARE_EVENT_CLASS
>+ (rmnet_handler_template,
>+
>+ TP_PROTO(struct sk_buff *skb),
>+
>+ TP_ARGS(skb),
>+
>+ TP_STRUCT__entry(
>+ __field(void *, skbaddr)
>+ __field(unsigned int, len)
>+ __string(name, skb->dev->name)
>+ ),
>+
>+ TP_fast_assign(
>+ __entry->skbaddr = skb;
>+ __entry->len = skb->len;
>+ __assign_str(name, skb->dev->name);
>+ ),
>+
>+ TP_printk("dev=%s skbaddr=%pK len=%u",
>+ __get_str(name), __entry->skbaddr, __entry->len)
>+)
>+
>+DEFINE_EVENT
>+ (rmnet_handler_template, rmnet_egress_handler,
>+
>+ TP_PROTO(struct sk_buff *skb),
>+
>+ TP_ARGS(skb)
>+);
>+
>+DEFINE_EVENT
>+ (rmnet_handler_template, rmnet_ingress_handler,
>+
>+ TP_PROTO(struct sk_buff *skb),
>+
>+ TP_ARGS(skb)
>+);
>+
>+DEFINE_EVENT
>+ (rmnet_handler_template, rmnet_vnd_start_xmit,
>+
>+ TP_PROTO(struct sk_buff *skb),
>+
>+ TP_ARGS(skb)
>+);
>+
>+DEFINE_EVENT
>+ (rmnet_handler_template, __rmnet_deliver_skb,
>+
>+ TP_PROTO(struct sk_buff *skb),
>+
>+ TP_ARGS(skb)
>+);
>+
>+TRACE_EVENT
>+ (rmnet_start_deaggregation,
>+
>+ TP_PROTO(struct sk_buff *skb),
>+
>+ TP_ARGS(skb),
>+
>+ TP_STRUCT__entry(
>+ __string(name, skb->dev->name)
>+ ),
>+
>+ TP_fast_assign(
>+ __assign_str(name, skb->dev->name);
>+ ),
>+
>+ TP_printk("dev: %s, deaggregated first packet", __get_str(name))
>+)
>+
>+TRACE_EVENT
>+ (rmnet_end_deaggregation,
>+
>+ TP_PROTO(struct sk_buff *skb, int num_deagg_packets),
>+
>+ TP_ARGS(skb, num_deagg_packets),
>+
>+ TP_STRUCT__entry(
>+ __string(name, skb->dev->name)
>+ __field(int, num)
>+ ),
>+
>+ TP_fast_assign(
>+ __assign_str(name, skb->dev->name);
>+ __entry->num = num_deagg_packets;
>+ ),
>+
>+ TP_printk("dev: %s, deaggregate end count: %d",
>+ __get_str(name), __entry->num)
>+)
>+
>+DECLARE_EVENT_CLASS
>+ (rmnet_physdev_action_template,
>+
>+ TP_PROTO(struct net_device *dev),
>+
>+ TP_ARGS(dev),
>+
>+ TP_STRUCT__entry(
>+ __string(name, dev->name)
>+ ),
>+
>+ TP_fast_assign(
>+ __assign_str(name, dev->name);
>+ ),
>+
>+ TP_printk("Physical dev=%s", __get_str(name))
>+)
>+
>+DEFINE_EVENT
>+ (rmnet_physdev_action_template, rmnet_unregister_cb_unhandled,
>+
>+ TP_PROTO(struct net_device *dev),
>+
>+ TP_ARGS(dev)
>+);
>+
>+DEFINE_EVENT
>+ (rmnet_physdev_action_template, rmnet_unregister_cb_entry,
>+
>+ TP_PROTO(struct net_device *dev),
>+
>+ TP_ARGS(dev)
>+);
>+
>+DEFINE_EVENT
>+ (rmnet_physdev_action_template, rmnet_unregister_cb_exit,
>+
>+ TP_PROTO(struct net_device *dev),
>+
>+ TP_ARGS(dev)
>+);
>+
>+DEFINE_EVENT
>+ (rmnet_physdev_action_template, rmnet_unregister_cb_clear_vnds,
>+
>+ TP_PROTO(struct net_device *dev),
>+
>+ TP_ARGS(dev)
>+);
>+
>+DEFINE_EVENT
>+ (rmnet_physdev_action_template, rmnet_unregister_cb_clear_lepcs,
>+
>+ TP_PROTO(struct net_device *dev),
>+
>+ TP_ARGS(dev)
>+);
>+
>+DEFINE_EVENT
>+ (rmnet_physdev_action_template, rmnet_associate,
>+
>+ TP_PROTO(struct net_device *dev),
>+
>+ TP_ARGS(dev)
>+);
>+
>+DEFINE_EVENT
>+ (rmnet_physdev_action_template, rmnet_unassociate,
>+
>+ TP_PROTO(struct net_device *dev),
>+
>+ TP_ARGS(dev)
>+);
>+
>+#endif /* _RMNET_DATA_TRACE_H_ */
>+
>+/* This part must be outside protection */
>+#undef TRACE_INCLUDE_PATH
>+#define TRACE_INCLUDE_PATH .
>+#include <trace/define_trace.h>
>+
>diff --git a/net/rmnet_data/rmnet_data_vnd.c b/net/rmnet_data/rmnet_data_vnd.c
>new file mode 100644
>index 0000000..d48dc23
>--- /dev/null
>+++ b/net/rmnet_data/rmnet_data_vnd.c
>@@ -0,0 +1,460 @@
>+/* Copyright (c) 2013-2017, The Linux Foundation. All rights reserved.
>+ *
>+ * This program is free software; you can redistribute it and/or modify
>+ * it under the terms of the GNU General Public License version 2 and
>+ * only version 2 as published by the Free Software Foundation.
>+ *
>+ * This program is distributed in the hope that it will be useful,
>+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
>+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>+ * GNU General Public License for more details.
>+ *
>+ *
>+ * RMNET Data virtual network driver
>+ *
>+ */
>+
>+#include <linux/types.h>
>+#include <linux/rmnet_data.h>
>+#include <linux/etherdevice.h>
>+#include <linux/if_arp.h>
>+#include <linux/spinlock.h>
>+#include <net/pkt_sched.h>
>+#include <linux/atomic.h>
>+#include "rmnet_data_config.h"
>+#include "rmnet_data_handlers.h"
>+#include "rmnet_data_private.h"
>+#include "rmnet_map.h"
>+#include "rmnet_data_vnd.h"
>+#include "rmnet_data_stats.h"
>+#include "rmnet_data_trace.h"
>+
>+RMNET_LOG_MODULE(RMNET_DATA_LOGMASK_VND);
>+
>+struct net_device *rmnet_devices[RMNET_DATA_MAX_VND];
>+
>+struct rmnet_vnd_private_s {
>+ struct rmnet_logical_ep_conf_s local_ep;
>+};
>+
>+/* RX/TX Fixup */
>+
>+/* rmnet_vnd_rx_fixup() - Virtual Network Device receive fixup hook
>+ * @skb: Socket buffer ("packet") to modify
>+ * @dev: Virtual network device
>+ *
>+ * Additional VND specific packet processing for ingress packets
>+ *
>+ * Return:
>+ * - RX_HANDLER_PASS if packet should continue to process in stack
>+ * - RX_HANDLER_CONSUMED if packet should not be processed in stack
>+ *
>+ */
>+int rmnet_vnd_rx_fixup(struct sk_buff *skb, struct net_device *dev)
>+{
>+ if (unlikely(!dev || !skb))
>+ return RX_HANDLER_CONSUMED;
>+
>+ dev->stats.rx_packets++;
>+ dev->stats.rx_bytes += skb->len;
>+
>+ return RX_HANDLER_PASS;
>+}
>+
>+/* rmnet_vnd_tx_fixup() - Virtual Network Device transmic fixup hook
>+ * @skb: Socket buffer ("packet") to modify
>+ * @dev: Virtual network device
>+ *
>+ * Additional VND specific packet processing for egress packets
>+ *
>+ * Return:
>+ * - RX_HANDLER_PASS if packet should continue to be transmitted
>+ * - RX_HANDLER_CONSUMED if packet should not be transmitted by stack
>+ */
>+int rmnet_vnd_tx_fixup(struct sk_buff *skb, struct net_device *dev)
>+{
>+ struct rmnet_vnd_private_s *dev_conf;
>+
>+ dev_conf = (struct rmnet_vnd_private_s *)netdev_priv(dev);
>+
>+ if (unlikely(!dev || !skb))
>+ return RX_HANDLER_CONSUMED;
>+
>+ dev->stats.tx_packets++;
>+ dev->stats.tx_bytes += skb->len;
>+
>+ return RX_HANDLER_PASS;
>+}
>+
>+/* Network Device Operations */
>+
>+/* rmnet_vnd_start_xmit() - Transmit NDO callback
>+ * @skb: Socket buffer ("packet") being sent from network stack
>+ * @dev: Virtual Network Device
>+ *
>+ * Standard network driver operations hook to transmit packets on virtual
>+ * network device. Called by network stack. Packet is not transmitted directly
>+ * from here; instead it is given to the rmnet egress handler.
>+ *
>+ * Return:
>+ * - NETDEV_TX_OK under all cirumstances (cannot block/fail)
>+ */
>+static netdev_tx_t rmnet_vnd_start_xmit(struct sk_buff *skb,
>+ struct net_device *dev)
>+{
>+ struct rmnet_vnd_private_s *dev_conf;
>+
>+ trace_rmnet_vnd_start_xmit(skb);
>+ dev_conf = (struct rmnet_vnd_private_s *)netdev_priv(dev);
>+ if (dev_conf->local_ep.egress_dev) {
>+ rmnet_egress_handler(skb, &dev_conf->local_ep);
>+ } else {
>+ dev->stats.tx_dropped++;
>+ rmnet_kfree_skb(skb, RMNET_STATS_SKBFREE_VND_NO_EGRESS);
>+ }
>+ return NETDEV_TX_OK;
>+}
>+
>+/* rmnet_vnd_change_mtu() - Change MTU NDO callback
>+ * @dev: Virtual network device
>+ * @new_mtu: New MTU value to set (in bytes)
>+ *
>+ * Standard network driver operations hook to set the MTU. Called by kernel to
>+ * set the device MTU. Checks if desired MTU is less than zero or greater than
>+ * RMNET_DATA_MAX_PACKET_SIZE;
>+ *
>+ * Return:
>+ * - 0 if successful
>+ * - -EINVAL if new_mtu is out of range
>+ */
>+static int rmnet_vnd_change_mtu(struct net_device *dev, int new_mtu)
>+{
>+ if (new_mtu < 0 || new_mtu > RMNET_DATA_MAX_PACKET_SIZE)
>+ return -EINVAL;
>+
>+ dev->mtu = new_mtu;
>+ return 0;
>+}
>+
>+static const struct net_device_ops rmnet_data_vnd_ops = {
>+ .ndo_init = 0,
>+ .ndo_start_xmit = rmnet_vnd_start_xmit,
>+ .ndo_change_mtu = rmnet_vnd_change_mtu,
>+ .ndo_set_mac_address = 0,
>+ .ndo_validate_addr = 0,
>+};
>+
>+/* rmnet_vnd_setup() - net_device initialization callback
>+ * @dev: Virtual network device
>+ *
>+ * Called by kernel whenever a new rmnet_data<n> device is created. Sets MTU,
>+ * flags, ARP type, needed headroom, etc...
>+ */
>+static void rmnet_vnd_setup(struct net_device *dev)
>+{
>+ struct rmnet_vnd_private_s *dev_conf;
>+
>+ LOGM("Setting up device %s", dev->name);
>+
>+ /* Clear out private data */
>+ dev_conf = (struct rmnet_vnd_private_s *)netdev_priv(dev);
>+ memset(dev_conf, 0, sizeof(struct rmnet_vnd_private_s));
>+
>+ dev->netdev_ops = &rmnet_data_vnd_ops;
>+ dev->mtu = RMNET_DATA_DFLT_PACKET_SIZE;
>+ dev->needed_headroom = RMNET_DATA_NEEDED_HEADROOM;
>+ random_ether_addr(dev->dev_addr);
>+ dev->tx_queue_len = RMNET_DATA_TX_QUEUE_LEN;
>+
>+ /* Raw IP mode */
>+ dev->header_ops = 0; /* No header */
>+ dev->type = ARPHRD_RAWIP;
>+ dev->hard_header_len = 0;
>+ dev->flags &= ~(IFF_BROADCAST | IFF_MULTICAST);
>+}
>+
>+/* Exposed API */
>+
>+/* rmnet_vnd_exit() - Shutdown cleanup hook
>+ *
>+ * Called by RmNet main on module unload. Cleans up data structures and
>+ * unregisters/frees net_devices.
>+ */
>+void rmnet_vnd_exit(void)
>+{
>+ int i;
>+
>+ for (i = 0; i < RMNET_DATA_MAX_VND; i++)
>+ if (rmnet_devices[i]) {
>+ unregister_netdev(rmnet_devices[i]);
>+ free_netdev(rmnet_devices[i]);
>+ }
>+}
>+
>+/* rmnet_vnd_init() - Init hook
>+ *
>+ * Called by RmNet main on module load. Initializes data structures
>+ */
>+int rmnet_vnd_init(void)
>+{
>+ memset(rmnet_devices, 0,
>+ sizeof(struct net_device *) * RMNET_DATA_MAX_VND);
>+ return 0;
>+}
>+
>+/* rmnet_vnd_create_dev() - Create a new virtual network device node.
>+ * @id: Virtual device node id
>+ * @new_device: Pointer to newly created device node
>+ * @prefix: Device name prefix
>+ *
>+ * Allocates structures for new virtual network devices. Sets the name of the
>+ * new device and registers it with the network stack. Device will appear in
>+ * ifconfig list after this is called. If the prefix is null, then
>+ * RMNET_DATA_DEV_NAME_STR will be assumed.
>+ *
>+ * Return:
>+ * - 0 if successful
>+ * - RMNET_CONFIG_BAD_ARGUMENTS if id is out of range or prefix is too long
>+ * - RMNET_CONFIG_DEVICE_IN_USE if id already in use
>+ * - RMNET_CONFIG_NOMEM if net_device allocation failed
>+ * - RMNET_CONFIG_UNKNOWN_ERROR if register_netdevice() fails
>+ */
>+int rmnet_vnd_create_dev(int id, struct net_device **new_device,
>+ const char *prefix)
>+{
>+ struct net_device *dev;
>+ char dev_prefix[IFNAMSIZ];
>+ int p, rc = 0;
>+
>+ if (id < 0 || id >= RMNET_DATA_MAX_VND) {
>+ *new_device = 0;
>+ return RMNET_CONFIG_BAD_ARGUMENTS;
>+ }
>+
>+ if (rmnet_devices[id]) {
>+ *new_device = 0;
>+ return RMNET_CONFIG_DEVICE_IN_USE;
>+ }
>+
>+ if (!prefix)
>+ p = scnprintf(dev_prefix, IFNAMSIZ, "%s%%d",
>+ RMNET_DATA_DEV_NAME_STR);
>+ else
>+ p = scnprintf(dev_prefix, IFNAMSIZ, "%s%%d", prefix);
>+ if (p >= (IFNAMSIZ - 1)) {
>+ LOGE("Specified prefix longer than IFNAMSIZ");
>+ return RMNET_CONFIG_BAD_ARGUMENTS;
>+ }
>+
>+ dev = alloc_netdev(sizeof(struct rmnet_vnd_private_s),
>+ dev_prefix,
>+ NET_NAME_ENUM,
>+ rmnet_vnd_setup);
>+ if (!dev) {
>+ LOGE("Failed to to allocate netdev for id %d", id);
>+ *new_device = 0;
>+ return RMNET_CONFIG_NOMEM;
>+ }
>+
>+ rc = register_netdevice(dev);
>+ if (rc != 0) {
>+ LOGE("Failed to to register netdev [%s]", dev->name);
>+ free_netdev(dev);
>+ *new_device = 0;
>+ rc = RMNET_CONFIG_UNKNOWN_ERROR;
>+ } else {
>+ rmnet_devices[id] = dev;
>+ *new_device = dev;
>+ LOGM("Registered device %s", dev->name);
>+ }
>+
>+ return rc;
>+}
>+
>+/* rmnet_vnd_free_dev() - free a virtual network device node.
>+ * @id: Virtual device node id
>+ *
>+ * Unregisters the virtual network device node and frees it.
>+ * unregister_netdev locks the rtnl mutex, so the mutex must not be locked
>+ * by the caller of the function. unregister_netdev enqueues the request to
>+ * unregister the device into a TODO queue. The requests in the TODO queue
>+ * are only done after rtnl mutex is unlocked, therefore free_netdev has to
>+ * called after unlocking rtnl mutex.
>+ *
>+ * Return:
>+ * - 0 if successful
>+ * - RMNET_CONFIG_NO_SUCH_DEVICE if id is invalid or not in range
>+ * - RMNET_CONFIG_DEVICE_IN_USE if device has logical ep that wasn't unset
>+ */
>+int rmnet_vnd_free_dev(int id)
>+{
>+ struct rmnet_logical_ep_conf_s *epconfig_l;
>+ struct net_device *dev;
>+
>+ rtnl_lock();
>+ if ((id < 0) || (id >= RMNET_DATA_MAX_VND) || !rmnet_devices[id]) {
>+ rtnl_unlock();
>+ LOGM("Invalid id [%d]", id);
>+ return RMNET_CONFIG_NO_SUCH_DEVICE;
>+ }
>+
>+ epconfig_l = rmnet_vnd_get_le_config(rmnet_devices[id]);
>+ if (epconfig_l && epconfig_l->refcount) {
>+ rtnl_unlock();
>+ return RMNET_CONFIG_DEVICE_IN_USE;
>+ }
>+
>+ dev = rmnet_devices[id];
>+ rmnet_devices[id] = 0;
>+ rtnl_unlock();
>+
>+ if (dev) {
>+ unregister_netdev(dev);
>+ free_netdev(dev);
>+ return 0;
>+ } else {
>+ return RMNET_CONFIG_NO_SUCH_DEVICE;
>+ }
>+}
>+
>+/* rmnet_vnd_get_name() - Gets the string name of a VND based on ID
>+ * @id: Virtual device node id
>+ * @name: Buffer to store name of virtual device node
>+ * @name_len: Length of name buffer
>+ *
>+ * Copies the name of the virtual device node into the users buffer. Will throw
>+ * an error if the buffer is null, or too small to hold the device name.
>+ *
>+ * Return:
>+ * - 0 if successful
>+ * - -EINVAL if name is null
>+ * - -EINVAL if id is invalid or not in range
>+ * - -EINVAL if name is too small to hold things
>+ */
>+int rmnet_vnd_get_name(int id, char *name, int name_len)
>+{
>+ int p;
>+
>+ if (!name) {
>+ LOGM("%s", "Bad arguments; name buffer null");
>+ return -EINVAL;
>+ }
>+
>+ if ((id < 0) || (id >= RMNET_DATA_MAX_VND) || !rmnet_devices[id]) {
>+ LOGM("Invalid id [%d]", id);
>+ return -EINVAL;
>+ }
>+
>+ p = strlcpy(name, rmnet_devices[id]->name, name_len);
>+ if (p >= name_len) {
>+ LOGM("Buffer to small (%d) to fit device name", name_len);
>+ return -EINVAL;
>+ }
>+ LOGL("Found mapping [%d]->\"%s\"", id, name);
>+
>+ return 0;
>+}
>+
>+/* rmnet_vnd_is_vnd() - Determine if net_device is RmNet owned virtual devices
>+ * @dev: Network device to test
>+ *
>+ * Searches through list of known RmNet virtual devices. This function is O(n)
>+ * and should not be used in the data path.
>+ *
>+ * Return:
>+ * - 0 if device is not RmNet virtual device
>+ * - 1 if device is RmNet virtual device
>+ */
>+int rmnet_vnd_is_vnd(struct net_device *dev)
>+{
>+ /* This is not an efficient search, but, this will only be called in
>+ * a configuration context, and the list is small.
>+ */
>+ int i;
>+
>+ if (!dev)
>+ return 0;
>+
>+ for (i = 0; i < RMNET_DATA_MAX_VND; i++)
>+ if (dev == rmnet_devices[i])
>+ return i + 1;
>+
>+ return 0;
>+}
>+
>+/* rmnet_vnd_get_le_config() - Get the logical endpoint configuration
>+ * @dev: Virtual device node
>+ *
>+ * Gets the logical endpoint configuration for a RmNet virtual network device
>+ * node. Caller should confirm that devices is a RmNet VND before calling.
>+ *
>+ * Return:
>+ * - Pointer to logical endpoint configuration structure
>+ * - 0 (null) if dev is null
>+ */
>+struct rmnet_logical_ep_conf_s *rmnet_vnd_get_le_config(struct net_device *dev)
>+{
>+ struct rmnet_vnd_private_s *dev_conf;
>+
>+ if (!dev)
>+ return 0;
>+
>+ dev_conf = (struct rmnet_vnd_private_s *)netdev_priv(dev);
>+ if (!dev_conf)
>+ return 0;
>+
>+ return &dev_conf->local_ep;
>+}
>+
>+/* rmnet_vnd_do_flow_control() - Process flow control request
>+ * @dev: Virtual network device node to do lookup on
>+ * @enable: boolean to enable/disable flow.
>+ *
>+ * Return:
>+ * - 0 if successful
>+ * - 1 if no mapping is found
>+ * - 2 if dev is not RmNet virtual network device node
>+ */
>+int rmnet_vnd_do_flow_control(struct net_device *dev, int enable)
>+{
>+ struct rmnet_vnd_private_s *dev_conf;
>+
>+ if (unlikely(!dev))
>+ return 2;
>+
>+ if (!rmnet_vnd_is_vnd(dev))
>+ return 2;
>+
>+ dev_conf = (struct rmnet_vnd_private_s *)netdev_priv(dev);
>+
>+ if (unlikely(!dev_conf))
>+ return 2;
>+
>+ LOGD("Setting VND TX queue state to %d", enable);
>+ /* Although we expect similar number of enable/disable
>+ * commands, optimize for the disable. That is more
>+ * latency sensitive than enable
>+ */
>+ if (unlikely(enable))
>+ netif_wake_queue(dev);
>+ else
>+ netif_stop_queue(dev);
>+
>+ return 0;
>+}
>+
>+/* rmnet_vnd_get_by_id() - Get VND by array index ID
>+ * @id: Virtual network deice id [0:RMNET_DATA_MAX_VND]
>+ *
>+ * Return:
>+ * - 0 if no device or ID out of range
>+ * - otherwise return pointer to VND net_device struct
>+ */
>+struct net_device *rmnet_vnd_get_by_id(int id)
>+{
>+ if (id < 0 || id >= RMNET_DATA_MAX_VND) {
>+ pr_err("Bug; VND ID out of bounds");
>+ return 0;
>+ }
>+ return rmnet_devices[id];
>+}
>diff --git a/net/rmnet_data/rmnet_data_vnd.h b/net/rmnet_data/rmnet_data_vnd.h
>new file mode 100644
>index 0000000..2903ffe
>--- /dev/null
>+++ b/net/rmnet_data/rmnet_data_vnd.h
>@@ -0,0 +1,34 @@
>+/* Copyright (c) 2013-2017, The Linux Foundation. All rights reserved.
>+ *
>+ * This program is free software; you can redistribute it and/or modify
>+ * it under the terms of the GNU General Public License version 2 and
>+ * only version 2 as published by the Free Software Foundation.
>+ *
>+ * This program is distributed in the hope that it will be useful,
>+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
>+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>+ * GNU General Public License for more details.
>+ *
>+ * RMNET Data Virtual Network Device APIs
>+ *
>+ */
>+
>+#include <linux/types.h>
>+
>+#ifndef _RMNET_DATA_VND_H_
>+#define _RMNET_DATA_VND_H_
>+
>+int rmnet_vnd_do_flow_control(struct net_device *dev, int enable);
>+struct rmnet_logical_ep_conf_s *rmnet_vnd_get_le_config(struct net_device *dev);
>+int rmnet_vnd_get_name(int id, char *name, int name_len);
>+int rmnet_vnd_create_dev(int id, struct net_device **new_device,
>+ const char *prefix);
>+int rmnet_vnd_free_dev(int id);
>+int rmnet_vnd_rx_fixup(struct sk_buff *skb, struct net_device *dev);
>+int rmnet_vnd_tx_fixup(struct sk_buff *skb, struct net_device *dev);
>+int rmnet_vnd_is_vnd(struct net_device *dev);
>+int rmnet_vnd_init(void);
>+void rmnet_vnd_exit(void);
>+struct net_device *rmnet_vnd_get_by_id(int id);
>+
>+#endif /* _RMNET_DATA_VND_H_ */
>diff --git a/net/rmnet_data/rmnet_map.h b/net/rmnet_data/rmnet_map.h
>new file mode 100644
>index 0000000..7d533aa
>--- /dev/null
>+++ b/net/rmnet_data/rmnet_map.h
>@@ -0,0 +1,100 @@
>+/* Copyright (c) 2013-2017, The Linux Foundation. All rights reserved.
>+ *
>+ * This program is free software; you can redistribute it and/or modify
>+ * it under the terms of the GNU General Public License version 2 and
>+ * only version 2 as published by the Free Software Foundation.
>+ *
>+ * This program is distributed in the hope that it will be useful,
>+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
>+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>+ * GNU General Public License for more details.
>+ */
>+
>+#include <linux/types.h>
>+#include <linux/spinlock.h>
>+
>+#ifndef _RMNET_MAP_H_
>+#define _RMNET_MAP_H_
>+
>+struct rmnet_map_control_command_s {
>+ u8 command_name;
>+ u8 cmd_type:2;
>+ u8 reserved:6;
>+ u16 reserved2;
>+ u32 transaction_id;
>+ union {
>+ u8 data[65528];
>+ struct {
>+ u16 ip_family:2;
>+ u16 reserved:14;
>+ u16 flow_control_seq_num;
>+ u32 qos_id;
>+ } flow_control;
>+ };
>+} __aligned(1);
>+
>+enum rmnet_map_results_e {
>+ RMNET_MAP_SUCCESS,
>+ RMNET_MAP_CONSUMED,
>+ RMNET_MAP_GENERAL_FAILURE,
>+ RMNET_MAP_NOT_ENABLED,
>+ RMNET_MAP_FAILED_AGGREGATION,
>+ RMNET_MAP_FAILED_MUX
>+};
>+
>+enum rmnet_map_mux_errors_e {
>+ RMNET_MAP_MUX_SUCCESS,
>+ RMNET_MAP_MUX_INVALID_MUX_ID,
>+ RMNET_MAP_MUX_INVALID_PAD_LENGTH,
>+ RMNET_MAP_MUX_INVALID_PKT_LENGTH,
>+ /* This should always be the last element */
>+ RMNET_MAP_MUX_ENUM_LENGTH
>+};
>+
>+enum rmnet_map_commands_e {
>+ RMNET_MAP_COMMAND_NONE,
>+ RMNET_MAP_COMMAND_FLOW_DISABLE,
>+ RMNET_MAP_COMMAND_FLOW_ENABLE,
>+ /* These should always be the last 2 elements */
>+ RMNET_MAP_COMMAND_UNKNOWN,
>+ RMNET_MAP_COMMAND_ENUM_LENGTH
>+};
>+
>+struct rmnet_map_header_s {
>+ u8 pad_len:6;
>+ u8 reserved_bit:1;
>+ u8 cd_bit:1;
>+ u8 mux_id;
>+ u16 pkt_len;
>+} __aligned(1);
>+
>+#define RMNET_MAP_GET_MUX_ID(Y) (((struct rmnet_map_header_s *) \
>+ (Y)->data)->mux_id)
>+#define RMNET_MAP_GET_CD_BIT(Y) (((struct rmnet_map_header_s *) \
>+ (Y)->data)->cd_bit)
>+#define RMNET_MAP_GET_PAD(Y) (((struct rmnet_map_header_s *) \
>+ (Y)->data)->pad_len)
>+#define RMNET_MAP_GET_CMD_START(Y) ((struct rmnet_map_control_command_s *) \
>+ ((Y)->data + \
>+ sizeof(struct rmnet_map_header_s)))
>+#define RMNET_MAP_GET_LENGTH(Y) (ntohs(((struct rmnet_map_header_s *) \
>+ (Y)->data)->pkt_len))
>+
>+#define RMNET_MAP_COMMAND_REQUEST 0
>+#define RMNET_MAP_COMMAND_ACK 1
>+#define RMNET_MAP_COMMAND_UNSUPPORTED 2
>+#define RMNET_MAP_COMMAND_INVALID 3
>+
>+#define RMNET_MAP_NO_PAD_BYTES 0
>+#define RMNET_MAP_ADD_PAD_BYTES 1
>+
>+u8 rmnet_map_demultiplex(struct sk_buff *skb);
>+struct sk_buff *rmnet_map_deaggregate(struct sk_buff *skb,
>+ struct rmnet_phys_ep_conf_s *config);
>+
>+struct rmnet_map_header_s *rmnet_map_add_map_header(struct sk_buff *skb,
>+ int hdrlen, int pad);
>+rx_handler_result_t rmnet_map_command(struct sk_buff *skb,
>+ struct rmnet_phys_ep_conf_s *config);
>+
>+#endif /* _RMNET_MAP_H_ */
>diff --git a/net/rmnet_data/rmnet_map_command.c b/net/rmnet_data/rmnet_map_command.c
>new file mode 100644
>index 0000000..acb0b11
>--- /dev/null
>+++ b/net/rmnet_data/rmnet_map_command.c
>@@ -0,0 +1,180 @@
>+/* Copyright (c) 2013-2017, The Linux Foundation. All rights reserved.
>+ *
>+ * This program is free software; you can redistribute it and/or modify
>+ * it under the terms of the GNU General Public License version 2 and
>+ * only version 2 as published by the Free Software Foundation.
>+ *
>+ * This program is distributed in the hope that it will be useful,
>+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
>+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>+ * GNU General Public License for more details.
>+ */
>+
>+#include <linux/module.h>
>+#include <linux/kernel.h>
>+#include <linux/skbuff.h>
>+#include <linux/netdevice.h>
>+#include <linux/rmnet_data.h>
>+#include <net/pkt_sched.h>
>+#include "rmnet_data_config.h"
>+#include "rmnet_map.h"
>+#include "rmnet_data_private.h"
>+#include "rmnet_data_vnd.h"
>+#include "rmnet_data_stats.h"
>+
>+RMNET_LOG_MODULE(RMNET_DATA_LOGMASK_MAPC);
>+
>+unsigned long int rmnet_map_command_stats[RMNET_MAP_COMMAND_ENUM_LENGTH];
>+module_param_array(rmnet_map_command_stats, ulong, 0, 0444);
>+MODULE_PARM_DESC(rmnet_map_command_stats, "MAP command statistics");
>+
>+/* rmnet_map_do_flow_control() - Process MAP flow control command
>+ * @skb: Socket buffer containing the MAP flow control message
>+ * @config: Physical end-point configuration of ingress device
>+ * @enable: boolean for enable/disable
>+ *
>+ * Process in-band MAP flow control messages. Assumes mux ID is mapped to a
>+ * RmNet Data vitrual network device.
>+ *
>+ * Return:
>+ * - RMNET_MAP_COMMAND_UNSUPPORTED on any error
>+ * - RMNET_MAP_COMMAND_ACK on success
>+ */
>+static u8 rmnet_map_do_flow_control(struct sk_buff *skb,
>+ struct rmnet_phys_ep_conf_s *config,
>+ int enable)
>+{
>+ struct rmnet_map_control_command_s *cmd;
>+ struct net_device *vnd;
>+ struct rmnet_logical_ep_conf_s *ep;
>+ u8 mux_id;
>+ u16 ip_family;
>+ u16 fc_seq;
>+ u32 qos_id;
>+ int r;
>+
>+ if (unlikely(!skb || !config))
>+ return RX_HANDLER_CONSUMED;
>+
>+ mux_id = RMNET_MAP_GET_MUX_ID(skb);
>+ cmd = RMNET_MAP_GET_CMD_START(skb);
>+
>+ if (mux_id >= RMNET_DATA_MAX_LOGICAL_EP) {
>+ LOGD("Got packet on %s with bad mux id %d",
>+ skb->dev->name, mux_id);
>+ rmnet_kfree_skb(skb, RMNET_STATS_SKBFREE_MAPC_BAD_MUX);
>+ return RX_HANDLER_CONSUMED;
>+ }
>+
>+ ep = &config->muxed_ep[mux_id];
>+
>+ if (!ep->refcount) {
>+ LOGD("Packet on %s:%d; has no logical endpoint config",
>+ skb->dev->name, mux_id);
>+
>+ rmnet_kfree_skb(skb, RMNET_STATS_SKBFREE_MAPC_MUX_NO_EP);
>+ return RX_HANDLER_CONSUMED;
>+ }
>+
>+ vnd = ep->egress_dev;
>+
>+ ip_family = cmd->flow_control.ip_family;
>+ fc_seq = ntohs(cmd->flow_control.flow_control_seq_num);
>+ qos_id = ntohl(cmd->flow_control.qos_id);
>+
>+ /* Ignore the ip family and pass the sequence number for both v4 and v6
>+ * sequence. User space does not support creating dedicated flows for
>+ * the 2 protocols
>+ */
>+ r = rmnet_vnd_do_flow_control(vnd, enable);
>+ LOGD("dev:%s, qos_id:0x%08X, ip_family:%hd, fc_seq %hd, en:%d",
>+ skb->dev->name, qos_id, ip_family & 3, fc_seq, enable);
>+
>+ if (r) {
>+ rmnet_kfree_skb(skb, RMNET_STATS_SKBFREE_MAPC_UNSUPPORTED);
>+ return RMNET_MAP_COMMAND_UNSUPPORTED;
>+ } else {
>+ return RMNET_MAP_COMMAND_ACK;
>+ }
>+}
>+
>+/* rmnet_map_send_ack() - Send N/ACK message for MAP commands
>+ * @skb: Socket buffer containing the MAP command message
>+ * @type: N/ACK message selector
>+ * @config: Physical end-point configuration of ingress device
>+ *
>+ * skb is modified to contain the message type selector. The message is then
>+ * transmitted on skb->dev. Note that this function grabs global Tx lock on
>+ * skb->dev for latency reasons.
>+ *
>+ * Return:
>+ * - void
>+ */
>+static void rmnet_map_send_ack(struct sk_buff *skb,
>+ unsigned char type,
>+ struct rmnet_phys_ep_conf_s *config)
>+{
>+ struct rmnet_map_control_command_s *cmd;
>+ int xmit_status;
>+
>+ if (unlikely(!skb))
>+ return;
>+
>+ skb->protocol = htons(ETH_P_MAP);
>+
>+ cmd = RMNET_MAP_GET_CMD_START(skb);
>+ cmd->cmd_type = type & 0x03;
>+
>+ netif_tx_lock(skb->dev);
>+ xmit_status = skb->dev->netdev_ops->ndo_start_xmit(skb, skb->dev);
>+ netif_tx_unlock(skb->dev);
>+
>+ LOGD("MAP command ACK=%hhu sent with rc: %d", type & 0x03, xmit_status);
>+}
>+
>+/* rmnet_map_command() - Entry point for handling MAP commands
>+ * @skb: Socket buffer containing the MAP command message
>+ * @config: Physical end-point configuration of ingress device
>+ *
>+ * Process MAP command frame and send N/ACK message as appropriate. Message cmd
>+ * name is decoded here and appropriate handler is called.
>+ *
>+ * Return:
>+ * - RX_HANDLER_CONSUMED. Command frames are always consumed.
>+ */
>+rx_handler_result_t rmnet_map_command(struct sk_buff *skb,
>+ struct rmnet_phys_ep_conf_s *config)
>+{
>+ struct rmnet_map_control_command_s *cmd;
>+ unsigned char command_name;
>+ unsigned char rc = 0;
>+
>+ if (unlikely(!skb))
>+ return RX_HANDLER_CONSUMED;
>+
>+ cmd = RMNET_MAP_GET_CMD_START(skb);
>+ command_name = cmd->command_name;
>+
>+ if (command_name < RMNET_MAP_COMMAND_ENUM_LENGTH)
>+ rmnet_map_command_stats[command_name]++;
>+
>+ switch (command_name) {
>+ case RMNET_MAP_COMMAND_FLOW_ENABLE:
>+ rc = rmnet_map_do_flow_control(skb, config, 1);
>+ break;
>+
>+ case RMNET_MAP_COMMAND_FLOW_DISABLE:
>+ rc = rmnet_map_do_flow_control(skb, config, 0);
>+ break;
>+
>+ default:
>+ rmnet_map_command_stats[RMNET_MAP_COMMAND_UNKNOWN]++;
>+ LOGM("Uknown MAP command: %d", command_name);
>+ rc = RMNET_MAP_COMMAND_UNSUPPORTED;
>+ rmnet_kfree_skb(skb, RMNET_STATS_SKBFREE_MAPC_UNSUPPORTED);
>+ break;
>+ }
>+ if (rc == RMNET_MAP_COMMAND_ACK)
>+ rmnet_map_send_ack(skb, rc, config);
>+ return RX_HANDLER_CONSUMED;
>+}
>diff --git a/net/rmnet_data/rmnet_map_data.c b/net/rmnet_data/rmnet_map_data.c
>new file mode 100644
>index 0000000..33bde72
>--- /dev/null
>+++ b/net/rmnet_data/rmnet_map_data.c
>@@ -0,0 +1,148 @@
>+/* Copyright (c) 2013-2017, The Linux Foundation. All rights reserved.
>+ *
>+ * This program is free software; you can redistribute it and/or modify
>+ * it under the terms of the GNU General Public License version 2 and
>+ * only version 2 as published by the Free Software Foundation.
>+ *
>+ * This program is distributed in the hope that it will be useful,
>+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
>+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>+ * GNU General Public License for more details.
>+ *
>+ * RMNET Data MAP protocol
>+ *
>+ */
>+
>+#include <linux/module.h>
>+#include <linux/kernel.h>
>+#include <linux/skbuff.h>
>+#include <linux/netdevice.h>
>+#include <linux/rmnet_data.h>
>+#include <linux/spinlock.h>
>+#include <linux/workqueue.h>
>+#include <linux/time.h>
>+#include <linux/ip.h>
>+#include <linux/ipv6.h>
>+#include <linux/udp.h>
>+#include <linux/tcp.h>
>+#include <linux/in.h>
>+#include <net/ip.h>
>+#include <net/checksum.h>
>+#include <net/ip6_checksum.h>
>+#include "rmnet_data_config.h"
>+#include "rmnet_map.h"
>+#include "rmnet_data_private.h"
>+#include "rmnet_data_stats.h"
>+#include "rmnet_data_trace.h"
>+
>+RMNET_LOG_MODULE(RMNET_DATA_LOGMASK_MAPD);
>+
>+#define RMNET_MAP_DEAGGR_SPACING 64
>+#define RMNET_MAP_DEAGGR_HEADROOM (RMNET_MAP_DEAGGR_SPACING / 2)
>+
>+/* rmnet_map_add_map_header() - Adds MAP header to front of skb->data
>+ * @skb: Socket buffer ("packet") to modify
>+ * @hdrlen: Number of bytes of header data which should not be included in
>+ * MAP length field
>+ * @pad: Specify if padding the MAP packet to make it 4 byte aligned is
>+ * necessary
>+ *
>+ * Padding is calculated and set appropriately in MAP header. Mux ID is
>+ * initialized to 0.
>+ *
>+ * Return:
>+ * - Pointer to MAP structure
>+ * - 0 (null) if insufficient headroom
>+ * - 0 (null) if insufficient tailroom for padding bytes
>+ *
>+ * todo: Parameterize skb alignment
>+ */
>+struct rmnet_map_header_s *rmnet_map_add_map_header(struct sk_buff *skb,
>+ int hdrlen, int pad)
>+{
>+ u32 padding, map_datalen;
>+ u8 *padbytes;
>+ struct rmnet_map_header_s *map_header;
>+
>+ if (skb_headroom(skb) < sizeof(struct rmnet_map_header_s))
>+ return 0;
>+
>+ map_datalen = skb->len - hdrlen;
>+ map_header = (struct rmnet_map_header_s *)
>+ skb_push(skb, sizeof(struct rmnet_map_header_s));
>+ memset(map_header, 0, sizeof(struct rmnet_map_header_s));
>+
>+ if (pad == RMNET_MAP_NO_PAD_BYTES) {
>+ map_header->pkt_len = htons(map_datalen);
>+ return map_header;
>+ }
>+
>+ padding = ALIGN(map_datalen, 4) - map_datalen;
>+
>+ if (padding == 0)
>+ goto done;
>+
>+ if (skb_tailroom(skb) < padding)
>+ return 0;
>+
>+ padbytes = (u8 *)skb_put(skb, padding);
>+ LOGD("pad: %d", padding);
>+ memset(padbytes, 0, padding);
>+
>+done:
>+ map_header->pkt_len = htons(map_datalen + padding);
>+ map_header->pad_len = padding & 0x3F;
>+
>+ return map_header;
>+}
>+
>+/* rmnet_map_deaggregate() - Deaggregates a single packet
>+ * @skb: Source socket buffer containing multiple MAP frames
>+ * @config: Physical endpoint configuration of the ingress device
>+ *
>+ * A whole new buffer is allocated for each portion of an aggregated frame.
>+ * Caller should keep calling deaggregate() on the source skb until 0 is
>+ * returned, indicating that there are no more packets to deaggregate. Caller
>+ * is responsible for freeing the original skb.
>+ *
>+ * Return:
>+ * - Pointer to new skb
>+ * - 0 (null) if no more aggregated packets
>+ */
>+struct sk_buff *rmnet_map_deaggregate(struct sk_buff *skb,
>+ struct rmnet_phys_ep_conf_s *config)
>+{
>+ struct sk_buff *skbn;
>+ struct rmnet_map_header_s *maph;
>+ u32 packet_len;
>+
>+ if (skb->len == 0)
>+ return 0;
>+
>+ maph = (struct rmnet_map_header_s *)skb->data;
>+ packet_len = ntohs(maph->pkt_len) + sizeof(struct rmnet_map_header_s);
>+
>+ if ((((int)skb->len) - ((int)packet_len)) < 0) {
>+ LOGM("%s", "Got malformed packet. Dropping");
>+ return 0;
>+ }
>+
>+ skbn = alloc_skb(packet_len + RMNET_MAP_DEAGGR_SPACING, GFP_ATOMIC);
>+ if (!skbn)
>+ return 0;
>+
>+ skbn->dev = skb->dev;
>+ skb_reserve(skbn, RMNET_MAP_DEAGGR_HEADROOM);
>+ skb_put(skbn, packet_len);
>+ memcpy(skbn->data, skb->data, packet_len);
>+ skb_pull(skb, packet_len);
>+
>+ /* Some hardware can send us empty frames. Catch them */
>+ if (ntohs(maph->pkt_len) == 0) {
>+ LOGD("Dropping empty MAP frame");
>+ rmnet_kfree_skb(skbn, RMNET_STATS_SKBFREE_DEAGG_DATA_LEN_0);
>+ return 0;
>+ }
>+
>+ return skbn;
>+}
>--
>1.9.1
>
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH net-next 1/1 v2] net: rmnet_data: Initial implementation
2017-03-13 8:54 ` Jiri Pirko
@ 2017-03-13 22:01 ` Subash Abhinov Kasiviswanathan
2017-03-14 6:55 ` Jiri Pirko
0 siblings, 1 reply; 12+ messages in thread
From: Subash Abhinov Kasiviswanathan @ 2017-03-13 22:01 UTC (permalink / raw)
To: Jiri Pirko; +Cc: netdev, davem, fengguang.wu
On 2017-03-13 02:54, Jiri Pirko wrote:
> Mon, Mar 13, 2017 at 08:43:09AM CET, subashab@codeaurora.org wrote:
>> RmNet Data driver provides a transport agnostic MAP (multiplexing and
>
> Why "data"? Why not just "rmnet"??
>
> Btw, what is "RmNet". Google does not give me much. Is it some
> priprietady Qualcomm thing? Is there some standard behind it?
>
Hi Jiri
Rm interface is used to describe an application processor tethered to
Qualcomm Technologies, Inc. modems. Since these are netdevices,
the term RmNet is used. I don't think there are published standards
available for this but I can provide relevant information and
document it as well.
rmnet was used for a USB based physical transport earlier, hence
this platform agnostic multiplexing driver was named as rmnet_data.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH net-next 1/1 v2] net: rmnet_data: Initial implementation
2017-03-13 22:01 ` Subash Abhinov Kasiviswanathan
@ 2017-03-14 6:55 ` Jiri Pirko
2017-03-14 21:19 ` Subash Abhinov Kasiviswanathan
0 siblings, 1 reply; 12+ messages in thread
From: Jiri Pirko @ 2017-03-14 6:55 UTC (permalink / raw)
To: Subash Abhinov Kasiviswanathan; +Cc: netdev, davem, fengguang.wu
Mon, Mar 13, 2017 at 11:01:15PM CET, subashab@codeaurora.org wrote:
>On 2017-03-13 02:54, Jiri Pirko wrote:
>> Mon, Mar 13, 2017 at 08:43:09AM CET, subashab@codeaurora.org wrote:
>> > RmNet Data driver provides a transport agnostic MAP (multiplexing and
>>
>> Why "data"? Why not just "rmnet"??
>>
>> Btw, what is "RmNet". Google does not give me much. Is it some
>> priprietady Qualcomm thing? Is there some standard behind it?
>>
>
>Hi Jiri
>
>Rm interface is used to describe an application processor tethered to
>Qualcomm Technologies, Inc. modems. Since these are netdevices,
I believe that this code should be a part of that driver, not a generic
code in net/
>the term RmNet is used. I don't think there are published standards
>available for this but I can provide relevant information and
>document it as well.
>
>rmnet was used for a USB based physical transport earlier, hence
>this platform agnostic multiplexing driver was named as rmnet_data.
ok, so?
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH net-next 1/1 v2] net: rmnet_data: Initial implementation
2017-03-13 7:43 ` [PATCH net-next 1/1 v2] net: rmnet_data: Initial implementation Subash Abhinov Kasiviswanathan
2017-03-13 8:54 ` Jiri Pirko
@ 2017-03-13 22:24 ` kbuild test robot
2017-03-24 22:15 ` Dan Williams
2017-03-24 22:21 ` Dan Williams
3 siblings, 0 replies; 12+ messages in thread
From: kbuild test robot @ 2017-03-13 22:24 UTC (permalink / raw)
To: Subash Abhinov Kasiviswanathan
Cc: kbuild-all, netdev, davem, fengguang.wu, Subash Abhinov Kasiviswanathan
Hi Subash,
[auto build test WARNING on net-next/master]
url: https://github.com/0day-ci/linux/commits/Subash-Abhinov-Kasiviswanathan/net-rmnet_data-Initial-implementation/20170313-174754
reproduce:
# apt-get install sparse
make ARCH=x86_64 allmodconfig
make C=1 CF=-D__CHECK_ENDIAN__
sparse warnings: (new ones prefixed by >>)
include/linux/compiler.h:264:8: sparse: attribute 'no_sanitize_address': unknown attribute
>> include/uapi/linux/rmnet_data.h:46:25: sparse: invalid bitfield specifier for type restricted __le16.
include/uapi/linux/rmnet_data.h:47:19: sparse: invalid bitfield specifier for type restricted __le16.
vim +46 include/uapi/linux/rmnet_data.h
30 #define RMNET_EGRESS_FORMAT_AGGREGATION (1<<2)
31 #define RMNET_EGRESS_FORMAT_MUXING (1<<3)
32 #define RMNET_EGRESS_FORMAT_MAP_CKSUMV3 (1<<4)
33 #define RMNET_EGRESS_FORMAT_MAP_CKSUMV4 (1<<5)
34
35 #define RMNET_INGRESS_FIX_ETHERNET (1<<0)
36 #define RMNET_INGRESS_FORMAT_MAP (1<<1)
37 #define RMNET_INGRESS_FORMAT_DEAGGREGATION (1<<2)
38 #define RMNET_INGRESS_FORMAT_DEMUXING (1<<3)
39 #define RMNET_INGRESS_FORMAT_MAP_COMMANDS (1<<4)
40 #define RMNET_INGRESS_FORMAT_MAP_CKSUMV3 (1<<5)
41 #define RMNET_INGRESS_FORMAT_MAP_CKSUMV4 (1<<6)
42
43 struct rmnet_nl_msg_s {
44 __le16 reserved;
45 __le16 message_type;
> 46 __le16 reserved2:14;
47 __le16 crd:2;
48 union {
49 __le16 arg_length;
50 __le16 return_code;
51 };
52 union {
53 __u8 data[RMNET_NL_DATA_MAX_LEN];
54 struct {
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH net-next 1/1 v2] net: rmnet_data: Initial implementation
2017-03-13 7:43 ` [PATCH net-next 1/1 v2] net: rmnet_data: Initial implementation Subash Abhinov Kasiviswanathan
2017-03-13 8:54 ` Jiri Pirko
2017-03-13 22:24 ` kbuild test robot
@ 2017-03-24 22:15 ` Dan Williams
2017-03-24 22:21 ` Dan Williams
3 siblings, 0 replies; 12+ messages in thread
From: Dan Williams @ 2017-03-24 22:15 UTC (permalink / raw)
To: Subash Abhinov Kasiviswanathan, netdev, davem, fengguang.wu
On Mon, 2017-03-13 at 01:43 -0600, Subash Abhinov Kasiviswanathan
wrote:
> RmNet Data driver provides a transport agnostic MAP (multiplexing and
> aggregation protocol) support in embedded and bridge modes. Module
> provides virtual network devices which can be attached to any IP-mode
> physical device. This will be used to provide all MAP functionality
> on future hardware in a single consistent location.
The first thing that jumps out at me is "why isn't this using
rtnl_link_ops?"
To me (and perhaps I'm completely wrong) the structure here is a lot
like VLAN interfaces. You have a base device (whether that's a netdev
or not) and you essentially "ip link add link cdc-wdm0 name rmnet0 type
rmnet id 5". Does the aggregation happen only on the downlink (eg,
device -> host) or can the host send aggregated packets too?
Using rtnl_link_ops would get rid of ASSOC_NET_DEV, UNASSOC_NET_DEV,
NEW_VND, NEW_VND_WITH_PREFIX, and FREE_VND. GET_NET_DEV_ASSOC goes
away becuase you use normal 'kobject' associations and you can derive
the rmnet parent through sysfs links. rmnet_nl_msg_s goes away,
because you can use nla_policy.
Just a thought; there seems to be a ton of overlap with rtnl_link_ops
in the control plane here.
Any thoughts on how this plays with net namespaces?
Also, I'm not sure if it make sense to provide first class tracepoints
for a specific driver, as it's not clear if they are userspace API or
not and thus may need to be kept stable. Or are perf probes enough
instead?
What's RMNET_EPMODE_BRIDGE and how is it used?
Dan
> Signed-off-by: Subash Abhinov Kasiviswanathan
> <subashab@codeaurora.org>
> ---
> Documentation/networking/rmnet_data.txt | 82 +++
> include/uapi/linux/Kbuild | 1 +
> include/uapi/linux/if_arp.h | 1 +
> include/uapi/linux/if_ether.h | 4 +-
> include/uapi/linux/rmnet_data.h | 214 ++++++
> net/Kconfig | 1 +
> net/Makefile | 1 +
> net/rmnet_data/Kconfig | 21 +
> net/rmnet_data/Makefile | 14 +
> net/rmnet_data/rmnet_data_config.c | 1168
> +++++++++++++++++++++++++++++++
> net/rmnet_data/rmnet_data_config.h | 107 +++
> net/rmnet_data/rmnet_data_handlers.c | 556 +++++++++++++++
> net/rmnet_data/rmnet_data_handlers.h | 24 +
> net/rmnet_data/rmnet_data_main.c | 60 ++
> net/rmnet_data/rmnet_data_private.h | 76 ++
> net/rmnet_data/rmnet_data_stats.c | 86 +++
> net/rmnet_data/rmnet_data_stats.h | 61 ++
> net/rmnet_data/rmnet_data_trace.h | 198 ++++++
> net/rmnet_data/rmnet_data_vnd.c | 460 ++++++++++++
> net/rmnet_data/rmnet_data_vnd.h | 34 +
> net/rmnet_data/rmnet_map.h | 100 +++
> net/rmnet_data/rmnet_map_command.c | 180 +++++
> net/rmnet_data/rmnet_map_data.c | 148 ++++
> 23 files changed, 3596 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/networking/rmnet_data.txt
> create mode 100644 include/uapi/linux/rmnet_data.h
> create mode 100644 net/rmnet_data/Kconfig
> create mode 100644 net/rmnet_data/Makefile
> create mode 100644 net/rmnet_data/rmnet_data_config.c
> create mode 100644 net/rmnet_data/rmnet_data_config.h
> create mode 100644 net/rmnet_data/rmnet_data_handlers.c
> create mode 100644 net/rmnet_data/rmnet_data_handlers.h
> create mode 100644 net/rmnet_data/rmnet_data_main.c
> create mode 100644 net/rmnet_data/rmnet_data_private.h
> create mode 100644 net/rmnet_data/rmnet_data_stats.c
> create mode 100644 net/rmnet_data/rmnet_data_stats.h
> create mode 100644 net/rmnet_data/rmnet_data_trace.h
> create mode 100644 net/rmnet_data/rmnet_data_vnd.c
> create mode 100644 net/rmnet_data/rmnet_data_vnd.h
> create mode 100644 net/rmnet_data/rmnet_map.h
> create mode 100644 net/rmnet_data/rmnet_map_command.c
> create mode 100644 net/rmnet_data/rmnet_map_data.c
>
> diff --git a/Documentation/networking/rmnet_data.txt
> b/Documentation/networking/rmnet_data.txt
> new file mode 100644
> index 0000000..ff6cce8
> --- /dev/null
> +++ b/Documentation/networking/rmnet_data.txt
> @@ -0,0 +1,82 @@
> +1. Introduction
> +
> +rmnet_data driver is used for supporting the Multiplexing and
> aggregation
> +Protocol (MAP). This protocol is used by all recent chipsets using
> Qualcomm
> +Technologies, Inc. modems.
> +
> +This driver can be used to register onto any physical network device
> in
> +IP mode. Physical transports include USB, HSIC, PCIe and IP
> accelerator.
> +
> +Multiplexing allows for creation of logical netdevices (rmnet_data
> devices) to
> +handle multiple private data networks (PDN) like a default internet,
> tethering,
> +multimedia messaging service (MMS) or IP media subsystem (IMS).
> Hardware sends
> +packets with MAP headers to rmnet_data. Based on the multiplexer id,
> rmnet_data
> +routes to the appropriate PDN after removing the MAP header.
> +
> +Aggregation is required to achieve high data rates. This involves
> hardware
> +sending aggregated bunch of MAP frames. rmnet_data driver will de-
> aggregate
> +these MAP frames and send them to appropriate PDN's.
> +
> +2. Packet format
> +
> +a. MAP packet (data / control)
> +
> +MAP header has the same endianness of the IP packet.
> +
> +Packet format -
> +
> +Bit 0 1 2-7 8 -
> 15 16 - 31
> +Function Command / Data Reserved Pad Multiplexer
> ID Payload length
> +Bit 32 - x
> +Function Raw Bytes
> +
> +Command (1)/ Data (0) bit value is to indicate if the packet is a
> MAP command
> +or data packet. Control packet is used for transport level flow
> control. Data
> +packets are standard IP packets.
> +
> +Reserved bits are usually zeroed out and to be ignored by receiver.
> +
> +Padding is number of bytes to be added for 4 byte alignment if
> required by
> +hardware.
> +
> +Multiplexer ID is to indicate the PDN on which data has to be sent.
> +
> +Payload length includes the padding length but does not include MAP
> header
> +length.
> +
> +b. MAP packet (command specific)
> +
> +Bit 0 1 2-7 8 -
> 15 16 - 31
> +Function Command Reserved Pad Multiplexer
> ID Payload length
> +Bit 32 - 39 40 - 45 46 - 47 48 - 63
> +Function Command name Reserved Command Type Reserved
> +Bit 64 - 95
> +Function Transaction ID
> +Bit 96 - 127
> +Function Command data
> +
> +Command 1 indicates disabling flow while 2 is enabling flow
> +
> +Command types -
> +0 for MAP command request
> +1 is to acknowledge the receipt of a command
> +2 is for unsupported commands
> +3 is for error during processing of commands
> +
> +c. Aggregation
> +
> +Aggregation is multiple MAP packets (can be data or command)
> delivered to
> +rmnet_data in a single linear skb. rmnet_data will process the
> individual
> +packets and either ACK the MAP command or deliver the IP packet to
> the
> +network stack as needed
> +
> +MAP header|IP Packet|Optional padding|MAP header|IP Packet|Optional
> padding....
> +MAP header|IP Packet|Optional padding|MAP header|Command
> Packet|Optional pad...
> +
> +3. Userspace configuration
> +
> +rmnet_data userspace configuration is done through netlink library
> librmnetctl
> +and command line utility rmnetcli. Utility is hosted in codeaurora
> forum git
> +
> +https://source.codeaurora.org/quic/la/platform/vendor/qcom-opensourc
> e/\
> +dataservices/tree/rmnetctl
> diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
> index dd9820b..c488c87 100644
> --- a/include/uapi/linux/Kbuild
> +++ b/include/uapi/linux/Kbuild
> @@ -370,6 +370,7 @@ header-y += resource.h
> header-y += rfkill.h
> header-y += rio_cm_cdev.h
> header-y += rio_mport_cdev.h
> +header-y += rmnet_data.h
> header-y += romfs_fs.h
> header-y += rose.h
> header-y += route.h
> diff --git a/include/uapi/linux/if_arp.h
> b/include/uapi/linux/if_arp.h
> index 4d024d7..e762447 100644
> --- a/include/uapi/linux/if_arp.h
> +++ b/include/uapi/linux/if_arp.h
> @@ -59,6 +59,7 @@
> #define ARPHRD_LAPB 516 /* LAPB
> */
> #define ARPHRD_DDCMP 517 /* Digital's DDCMP
> protocol */
> #define ARPHRD_RAWHDLC 518 /* Raw HDLC
> */
> +#define ARPHRD_RAWIP 530 /* Raw IP
> */
>
> #define ARPHRD_TUNNEL 768 /* IPIP tunnel
> */
> #define ARPHRD_TUNNEL6 769 /* IP6IP6
> tunnel */
> diff --git a/include/uapi/linux/if_ether.h
> b/include/uapi/linux/if_ether.h
> index 5bc9bfd..70520da 100644
> --- a/include/uapi/linux/if_ether.h
> +++ b/include/uapi/linux/if_ether.h
> @@ -104,7 +104,9 @@
> #define ETH_P_QINQ3 0x9300 /* deprecated QinQ
> VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
> #define ETH_P_EDSA 0xDADA /* Ethertype DSA [
> NOT AN OFFICIALLY REGISTERED ID ] */
> #define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT
> AN OFFICIALLY REGISTERED ID ] */
> -
> +#define ETH_P_MAP 0xDA1A /* Multiplexing and
> Aggregation Protocol
> + * NOT AN OFFICIALLY
> REGISTERED ID ]
> + */
> #define ETH_P_802_3_MIN 0x0600 /* If the value
> in the ethernet type is less than this value
> * then the frame is
> Ethernet II. Else it is 802.3 */
>
> diff --git a/include/uapi/linux/rmnet_data.h
> b/include/uapi/linux/rmnet_data.h
> new file mode 100644
> index 0000000..04b6646
> --- /dev/null
> +++ b/include/uapi/linux/rmnet_data.h
> @@ -0,0 +1,214 @@
> +/* Copyright (c) 2013-2017, The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * RMNET Data configuration specification
> + */
> +
> +#ifndef _RMNET_DATA_H_
> +#define _RMNET_DATA_H_
> +
> +/* Netlink API */
> +#define RMNET_NETLINK_PROTO 31
> +#define RMNET_MAX_STR_LEN 16
> +#define RMNET_NL_DATA_MAX_LEN 64
> +
> +#define RMNET_NETLINK_MSG_COMMAND 0
> +#define RMNET_NETLINK_MSG_RETURNCODE 1
> +#define RMNET_NETLINK_MSG_RETURNDATA 2
> +
> +/* Constants */
> +#define RMNET_EGRESS_FORMAT__RESERVED__ (1<<0)
> +#define RMNET_EGRESS_FORMAT_MAP (1<<1)
> +#define RMNET_EGRESS_FORMAT_AGGREGATION (1<<2)
> +#define RMNET_EGRESS_FORMAT_MUXING (1<<3)
> +#define RMNET_EGRESS_FORMAT_MAP_CKSUMV3 (1<<4)
> +#define RMNET_EGRESS_FORMAT_MAP_CKSUMV4 (1<<5)
> +
> +#define RMNET_INGRESS_FIX_ETHERNET (1<<0)
> +#define RMNET_INGRESS_FORMAT_MAP (1<<1)
> +#define RMNET_INGRESS_FORMAT_DEAGGREGATION (1<<2)
> +#define RMNET_INGRESS_FORMAT_DEMUXING (1<<3)
> +#define RMNET_INGRESS_FORMAT_MAP_COMMANDS (1<<4)
> +#define RMNET_INGRESS_FORMAT_MAP_CKSUMV3 (1<<5)
> +#define RMNET_INGRESS_FORMAT_MAP_CKSUMV4 (1<<6)
> +
> +struct rmnet_nl_msg_s {
> + __le16 reserved;
> + __le16 message_type;
> + __le16 reserved2:14;
> + __le16 crd:2;
> + union {
> + __le16 arg_length;
> + __le16 return_code;
> + };
> + union {
> + __u8 data[RMNET_NL_DATA_MAX_LEN];
> + struct {
> + __u8 dev[RMNET_MAX_STR_LEN];
> + __le32 flags;
> + __le16 agg_size;
> + __le16 agg_count;
> + __u8 tail_spacing;
> + } data_format;
> + struct {
> + __u8 dev[RMNET_MAX_STR_LEN];
> + __le32 ep_id;
> + __u8 operating_mode;
> + __u8 next_dev[RMNET_MAX_STR_LEN];
> + } local_ep_config;
> + struct {
> + __le32 id;
> + __u8 vnd_name[RMNET_MAX_STR_LEN];
> + } vnd;
> + };
> +};
> +
> +enum rmnet_netlink_message_types_e {
> + /* RMNET_NETLINK_ASSOCIATE_NETWORK_DEVICE - Register RMNET
> data driver
> + * on a particular
> device.
> + * Args: char[] dev_name: Null terminated ASCII string, max
> length: 15
> + * Returns: status code
> + */
> + RMNET_NETLINK_ASSOCIATE_NETWORK_DEVICE,
> +
> + /* RMNET_NETLINK_UNASSOCIATE_NETWORK_DEVICE - Unregister
> RMNET data
> + * driver on a
> particular
> + * device.
> + * Args: char[] dev_name: Null terminated ASCII string, max
> length: 15
> + * Returns: status code
> + */
> + RMNET_NETLINK_UNASSOCIATE_NETWORK_DEVICE,
> +
> + /* RMNET_NETLINK_GET_NETWORK_DEVICE_ASSOCIATED - Get if
> RMNET data
> + * driver is
> registered on a
> + * particular
> device.
> + * Args: char[] dev_name: Null terminated ASCII string, max
> length: 15
> + * Returns: 1 if registered, 0 if not
> + */
> + RMNET_NETLINK_GET_NETWORK_DEVICE_ASSOCIATED,
> +
> + /* RMNET_NETLINK_SET_LINK_EGRESS_DATA_FORMAT - Sets the
> egress data
> + * format for a
> particular
> + * link.
> + * Args: __le32 egress_flags
> + * char[] dev_name: Null terminated ASCII string, max
> length: 15
> + * Returns: status code
> + */
> + RMNET_NETLINK_SET_LINK_EGRESS_DATA_FORMAT,
> +
> + /* RMNET_NETLINK_GET_LINK_EGRESS_DATA_FORMAT - Gets the
> egress data
> + * format for a
> particular
> + * link.
> + * Args: char[] dev_name: Null terminated ASCII string, max
> length: 15
> + * Returns: 4-bytes data: __le32 egress_flags
> + */
> + RMNET_NETLINK_GET_LINK_EGRESS_DATA_FORMAT,
> +
> + /* RMNET_NETLINK_SET_LINK_INGRESS_DATA_FORMAT - Sets the
> ingress data
> + * format for a
> particular
> + * link.
> + * Args: __le32 ingress_flags
> + * char[] dev_name: Null terminated ASCII string, max
> length: 15
> + * Returns: status code
> + */
> + RMNET_NETLINK_SET_LINK_INGRESS_DATA_FORMAT,
> +
> + /* RMNET_NETLINK_GET_LINK_INGRESS_DATA_FORMAT - Gets the
> ingress data
> + * format for a
> particular
> + * link.
> + * Args: char[] dev_name: Null terminated ASCII string, max
> length: 15
> + * Returns: 4-bytes data: __le32 ingress_flags
> + */
> + RMNET_NETLINK_GET_LINK_INGRESS_DATA_FORMAT,
> +
> + /* RMNET_NETLINK_SET_LOGICAL_EP_CONFIG - Sets the logical
> endpoint
> + * configuration for a
> particular
> + * link.
> + * Args: char[] dev_name: Null terminated ASCII string, max
> length: 15
> + * __le32 logical_ep_id, valid values are -1 through 31
> + * __u8 rmnet_mode: one of none, vnd, bridged
> + * char[] egress_dev_name: Egress device if operating in
> bridge mode
> + * Returns: status code
> + */
> + RMNET_NETLINK_SET_LOGICAL_EP_CONFIG,
> +
> + /* RMNET_NETLINK_UNSET_LOGICAL_EP_CONFIG - Un-sets the
> logical endpoint
> + * configuration for a
> particular
> + * link.
> + * Args: char[] dev_name: Null terminated ASCII string, max
> length: 15
> + * __le32 logical_ep_id, valid values are -1 through
> 31
> + * Returns: status code
> + */
> + RMNET_NETLINK_UNSET_LOGICAL_EP_CONFIG,
> +
> + /* RMNET_NETLINK_GET_LOGICAL_EP_CONFIG - Gets the logical
> endpoint
> + * configuration for a
> particular
> + * link.
> + * Args: char[] dev_name: Null terminated ASCII string, max
> length: 15
> + * __le32 logical_ep_id, valid values are -1 through
> 31
> + * Returns: __u8 rmnet_mode: one of none, vnd, bridged
> + * char[] egress_dev_name: Egress device
> + */
> + RMNET_NETLINK_GET_LOGICAL_EP_CONFIG,
> +
> + /* RMNET_NETLINK_NEW_VND - Creates a new virtual network
> device node
> + * Args: __le32 node number
> + * Returns: status code
> + */
> + RMNET_NETLINK_NEW_VND,
> +
> + /* RMNET_NETLINK_NEW_VND_WITH_PREFIX - Creates a new virtual
> network
> + * device node with the
> specified
> + * prefix for the device
> name
> + * Args: __le32 node number
> + * char[] vnd_name - Use as prefix
> + * Returns: status code
> + */
> + RMNET_NETLINK_NEW_VND_WITH_PREFIX,
> +
> + /* RMNET_NETLINK_GET_VND_NAME - Gets the string name of a
> VND from ID
> + * Args: __le32 node number
> + * Returns: char[] vnd_name
> + */
> + RMNET_NETLINK_GET_VND_NAME,
> +
> + /* RMNET_NETLINK_FREE_VND - Removes virtual network device
> node
> + * Args: __le32 node number
> + * Returns: status code
> + */
> + RMNET_NETLINK_FREE_VND
> +};
> +
> +enum rmnet_config_endpoint_modes_e {
> + /* Pass the frame up the stack with no modifications to skb-
> >dev */
> + RMNET_EPMODE_NONE,
> + /* Replace skb->dev to a virtual rmnet device and pass up
> the stack */
> + RMNET_EPMODE_VND,
> + /* Pass the frame directly to another device with
> dev_queue_xmit(). */
> + RMNET_EPMODE_BRIDGE,
> + /* Must be the last item in the
> list */
> + RMNET_EPMODE_LENGTH
> +};
> +
> +enum rmnet_config_return_codes_e {
> + RMNET_CONFIG_OK,
> + RMNET_CONFIG_UNKNOWN_MESSAGE,
> + RMNET_CONFIG_UNKNOWN_ERROR,
> + RMNET_CONFIG_NOMEM,
> + RMNET_CONFIG_DEVICE_IN_USE,
> + RMNET_CONFIG_INVALID_REQUEST,
> + RMNET_CONFIG_NO_SUCH_DEVICE,
> + RMNET_CONFIG_BAD_ARGUMENTS,
> + RMNET_CONFIG_BAD_EGRESS_DEVICE,
> + RMNET_CONFIG_TC_HANDLE_FULL
> +};
> +
> +#endif /* _RMNET_DATA_H_ */
> diff --git a/net/Kconfig b/net/Kconfig
> index 102f781..77a0d93 100644
> --- a/net/Kconfig
> +++ b/net/Kconfig
> @@ -239,6 +239,7 @@ source "net/switchdev/Kconfig"
> source "net/l3mdev/Kconfig"
> source "net/qrtr/Kconfig"
> source "net/ncsi/Kconfig"
> +source "net/rmnet_data/Kconfig"
>
> config RPS
> bool
> diff --git a/net/Makefile b/net/Makefile
> index 9b68155..4a04f56 100644
> --- a/net/Makefile
> +++ b/net/Makefile
> @@ -84,3 +84,4 @@ obj-y += l3mdev/
> endif
> obj-$(CONFIG_QRTR) += qrtr/
> obj-$(CONFIG_NET_NCSI) += ncsi/
> +obj-$(CONFIG_RMNET_DATA) += rmnet_data/
> diff --git a/net/rmnet_data/Kconfig b/net/rmnet_data/Kconfig
> new file mode 100644
> index 0000000..4748a6f
> --- /dev/null
> +++ b/net/rmnet_data/Kconfig
> @@ -0,0 +1,21 @@
> +#
> +# RMNET Data and MAP driver
> +#
> +
> +menuconfig RMNET_DATA
> + depends on NETDEVICES
> + bool "RmNet Data and MAP driver"
> + ---help---
> + If you say Y here, then the rmnet_data module will be
> statically
> + compiled into the kernel. The rmnet data module provides
> MAP
> + functionality for embedded and bridged traffic.
> +if RMNET_DATA
> +
> +config RMNET_DATA_DEBUG
> + bool "RmNet Data Debug Logging"
> + ---help---
> + Say Y here if you want RmNet data to be able to log
> packets in main
> + system log. This should not be enabled on production
> builds as it can
> + impact system performance. Note that simply enabling it
> here will not
> + enable the logging; it must be enabled at run-time as
> well.
> +endif # RMNET_DATA
> diff --git a/net/rmnet_data/Makefile b/net/rmnet_data/Makefile
> new file mode 100644
> index 0000000..ccb8b5b
> --- /dev/null
> +++ b/net/rmnet_data/Makefile
> @@ -0,0 +1,14 @@
> +#
> +# Makefile for the RMNET Data module
> +#
> +
> +rmnet_data-y := rmnet_data_main.o
> +rmnet_data-y += rmnet_data_config.o
> +rmnet_data-y += rmnet_data_vnd.o
> +rmnet_data-y += rmnet_data_handlers.o
> +rmnet_data-y += rmnet_map_data.o
> +rmnet_data-y += rmnet_map_command.o
> +rmnet_data-y += rmnet_data_stats.o
> +obj-$(CONFIG_RMNET_DATA) += rmnet_data.o
> +
> +CFLAGS_rmnet_data_main.o := -I$(src)
> diff --git a/net/rmnet_data/rmnet_data_config.c
> b/net/rmnet_data/rmnet_data_config.c
> new file mode 100644
> index 0000000..38a21d8
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_config.c
> @@ -0,0 +1,1168 @@
> +/* Copyright (c) 2013-2017, The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * RMNET Data configuration engine
> + *
> + */
> +
> +#include <net/sock.h>
> +#include <linux/module.h>
> +#include <linux/netlink.h>
> +#include <linux/netdevice.h>
> +#include <linux/skbuff.h>
> +#include <linux/spinlock.h>
> +#include <linux/rmnet_data.h>
> +#include "rmnet_data_config.h"
> +#include "rmnet_data_handlers.h"
> +#include "rmnet_data_vnd.h"
> +#include "rmnet_data_private.h"
> +#include "rmnet_data_trace.h"
> +
> +RMNET_LOG_MODULE(RMNET_DATA_LOGMASK_CONFIG);
> +
> +/* Local Definitions and Declarations */
> +#define RMNET_LOCAL_LOGICAL_ENDPOINT -1
> +
> +static struct sock *nl_socket_handle;
> +
> +static struct netlink_kernel_cfg rmnet_netlink_cfg = {
> + .input = rmnet_config_netlink_msg_handler
> +};
> +
> +static struct notifier_block rmnet_dev_notifier = {
> + .notifier_call = rmnet_config_notify_cb,
> + .next = 0,
> + .priority = 0
> +};
> +
> +struct rmnet_free_vnd_work {
> + struct work_struct work;
> + int vnd_id[RMNET_DATA_MAX_VND];
> + int count;
> +};
> +
> +/* Init and Cleanup */
> +
> +static struct sock *_rmnet_config_start_netlink(void)
> +{
> + return netlink_kernel_create(&init_net,
> + RMNET_NETLINK_PROTO,
> + &rmnet_netlink_cfg);
> +}
> +
> +/* rmnet_config_init() - Startup init
> + *
> + * Registers netlink protocol with kernel and opens socket. Netlink
> handler is
> + * registered with kernel.
> + */
> +int rmnet_config_init(void)
> +{
> + int rc;
> +
> + nl_socket_handle = _rmnet_config_start_netlink();
> + if (!nl_socket_handle) {
> + LOGE("%s", "Failed to init netlink socket");
> + return RMNET_INIT_ERROR;
> + }
> +
> + rc = register_netdevice_notifier(&rmnet_dev_notifier);
> + if (rc != 0) {
> + LOGE("Failed to register device notifier; rc=%d",
> rc);
> + /* TODO: Cleanup the nl socket */
> + return RMNET_INIT_ERROR;
> + }
> +
> + return 0;
> +}
> +
> +/* rmnet_config_exit() - Cleans up all netlink related resources
> + */
> +void rmnet_config_exit(void)
> +{
> + int rc;
> +
> + netlink_kernel_release(nl_socket_handle);
> + rc = unregister_netdevice_notifier(&rmnet_dev_notifier);
> + if (rc != 0)
> + LOGE("Failed to unregister device notifier; rc=%d",
> rc);
> +}
> +
> +/* Helper Functions */
> +
> +/* _rmnet_is_physical_endpoint_associated() - Determines if device
> is associated
> + * @dev: Device to get check
> + *
> + * Compares device rx_handler callback pointer against known
> function
> + *
> + * Return:
> + * - 1 if associated
> + * - 0 if NOT associated
> + */
> +static inline int _rmnet_is_physical_endpoint_associated(struct
> net_device *dev)
> +{
> + rx_handler_func_t *rx_handler;
> +
> + rx_handler = rcu_dereference(dev->rx_handler);
> +
> + if (rx_handler == rmnet_rx_handler)
> + return 1;
> + else
> + return 0;
> +}
> +
> +/* _rmnet_get_phys_ep_config() - Get physical ep config for an
> associated device
> + * @dev: Device to get endpoint configuration from
> + *
> + * Return:
> + * - pointer to configuration if successful
> + * - 0 (null) if device is not associated
> + */
> +static inline struct rmnet_phys_ep_conf_s *_rmnet_get_phys_ep_config
> + (struct net_device
> *dev)
> +{
> + if (_rmnet_is_physical_endpoint_associated(dev))
> + return (struct rmnet_phys_ep_conf_s *)
> + rcu_dereference(dev->rx_handler_data);
> + else
> + return 0;
> +}
> +
> +/* _rmnet_get_logical_ep() - Gets the logical end point
> configuration
> + * structure for a network device
> + * @dev: Device to get endpoint configuration from
> + * @config_id: Logical endpoint id on device
> + * Retrieves the logical_endpoint_config structure.
> + *
> + * Return:
> + * - End point configuration structure
> + * - NULL in case of an error
> + */
> +struct rmnet_logical_ep_conf_s *_rmnet_get_logical_ep(struct
> net_device *dev,
> + int config_id)
> +{
> + struct rmnet_phys_ep_conf_s *config;
> + struct rmnet_logical_ep_conf_s *epconfig_l;
> +
> + if (rmnet_vnd_is_vnd(dev)) {
> + epconfig_l = rmnet_vnd_get_le_config(dev);
> + } else {
> + config = _rmnet_get_phys_ep_config(dev);
> +
> + if (!config)
> + return NULL;
> +
> + if (config_id == RMNET_LOCAL_LOGICAL_ENDPOINT)
> + epconfig_l = &config->local_ep;
> + else
> + epconfig_l = &config->muxed_ep[config_id];
> + }
> +
> + return epconfig_l;
> +}
> +
> +static void _rmnet_netlink_set_link_egress_data_format
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + struct net_device *dev;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> + dev = dev_get_by_name(&init_net, rmnet_header-
> >data_format.dev);
> +
> + if (!dev) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_NO_SUCH_DEVICE;
> + return;
> + }
> +
> + resp_rmnet->return_code =
> + rmnet_set_egress_data_format(dev,
> + rmnet_header-
> >data_format.flags,
> + rmnet_header-
> >data_format.agg_size,
> + rmnet_header-
> >data_format.agg_count
> + );
> + dev_put(dev);
> +}
> +
> +static void _rmnet_netlink_set_link_ingress_data_format
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + struct net_device *dev;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> +
> + dev = dev_get_by_name(&init_net, rmnet_header-
> >data_format.dev);
> + if (!dev) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_NO_SUCH_DEVICE;
> + return;
> + }
> +
> + resp_rmnet->return_code = rmnet_set_ingress_data_format(
> + dev,
> + rmnet_header-
> >data_format.flags);
> + dev_put(dev);
> +}
> +
> +static void _rmnet_netlink_set_logical_ep_config
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + struct net_device *dev, *dev2;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> + if (rmnet_header->local_ep_config.ep_id < -1 ||
> + rmnet_header->local_ep_config.ep_id > 254) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_BAD_ARGUMENTS;
> + return;
> + }
> +
> + dev = dev_get_by_name(&init_net,
> + rmnet_header->local_ep_config.dev);
> +
> + dev2 = dev_get_by_name(&init_net,
> + rmnet_header-
> >local_ep_config.next_dev);
> +
> + if (dev && dev2)
> + resp_rmnet->return_code =
> + rmnet_set_logical_endpoint_config(
> + dev,
> + rmnet_header->local_ep_config.ep_id,
> + rmnet_header-
> >local_ep_config.operating_mode,
> + dev2);
> + else
> + resp_rmnet->return_code =
> RMNET_CONFIG_NO_SUCH_DEVICE;
> +
> + if (dev)
> + dev_put(dev);
> + if (dev2)
> + dev_put(dev2);
> +}
> +
> +static void _rmnet_netlink_unset_logical_ep_config
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + struct net_device *dev;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> + if (rmnet_header->local_ep_config.ep_id < -1 ||
> + rmnet_header->local_ep_config.ep_id > 254) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_BAD_ARGUMENTS;
> + return;
> + }
> +
> + dev = dev_get_by_name(&init_net, rmnet_header-
> >local_ep_config.dev);
> +
> + if (dev) {
> + resp_rmnet->return_code =
> + rmnet_unset_logical_endpoint_config(
> + dev,
> + rmnet_header-
> >local_ep_config.ep_id);
> + dev_put(dev);
> + } else {
> + resp_rmnet->return_code =
> RMNET_CONFIG_NO_SUCH_DEVICE;
> + }
> +}
> +
> +static void _rmnet_netlink_get_logical_ep_config
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + struct net_device *dev;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> + if (rmnet_header->local_ep_config.ep_id < -1 ||
> + rmnet_header->local_ep_config.ep_id > 254) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_BAD_ARGUMENTS;
> + return;
> + }
> +
> + dev = dev_get_by_name(&init_net, rmnet_header-
> >local_ep_config.dev);
> +
> + if (dev) {
> + resp_rmnet->return_code =
> + rmnet_get_logical_endpoint_config(
> + dev,
> + rmnet_header->local_ep_config.ep_id,
> + &resp_rmnet-
> >local_ep_config.operating_mode,
> + resp_rmnet-
> >local_ep_config.next_dev,
> + sizeof(resp_rmnet-
> >local_ep_config.next_dev));
> + } else {
> + resp_rmnet->return_code =
> RMNET_CONFIG_NO_SUCH_DEVICE;
> + return;
> + }
> +
> + if (resp_rmnet->return_code == RMNET_CONFIG_OK) {
> + /* Begin Data */
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNDATA;
> + resp_rmnet->arg_length = sizeof(((struct
> rmnet_nl_msg_s *)0)
> + ->local_ep_config);
> + }
> + dev_put(dev);
> +}
> +
> +static void _rmnet_netlink_associate_network_device
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + struct net_device *dev;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> +
> + dev = dev_get_by_name(&init_net, rmnet_header->data);
> + if (!dev) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_NO_SUCH_DEVICE;
> + return;
> + }
> +
> + resp_rmnet->return_code =
> rmnet_associate_network_device(dev);
> + dev_put(dev);
> +}
> +
> +static void _rmnet_netlink_unassociate_network_device
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + struct net_device *dev;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> +
> + dev = dev_get_by_name(&init_net, rmnet_header->data);
> + if (!dev) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_NO_SUCH_DEVICE;
> + return;
> + }
> +
> + resp_rmnet->return_code =
> rmnet_unassociate_network_device(dev);
> + dev_put(dev);
> +}
> +
> +static void _rmnet_netlink_get_network_device_associated
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + struct net_device *dev;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> +
> + dev = dev_get_by_name(&init_net, rmnet_header->data);
> + if (!dev) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_NO_SUCH_DEVICE;
> + return;
> + }
> +
> + resp_rmnet->return_code =
> _rmnet_is_physical_endpoint_associated(dev);
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNDATA;
> + dev_put(dev);
> +}
> +
> +static void _rmnet_netlink_get_link_egress_data_format
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + struct net_device *dev;
> + struct rmnet_phys_ep_conf_s *config;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> +
> + dev = dev_get_by_name(&init_net, rmnet_header-
> >data_format.dev);
> + if (!dev) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_NO_SUCH_DEVICE;
> + return;
> + }
> +
> + config = _rmnet_get_phys_ep_config(dev);
> + if (!config) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_INVALID_REQUEST;
> + dev_put(dev);
> + return;
> + }
> +
> + /* Begin Data */
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNDATA;
> + resp_rmnet->arg_length = sizeof(((struct rmnet_nl_msg_s *)0)
> + ->data_format);
> + resp_rmnet->data_format.flags = config->egress_data_format;
> + resp_rmnet->data_format.agg_count = 0;
> + resp_rmnet->data_format.agg_size = 0;
> + dev_put(dev);
> +}
> +
> +static void _rmnet_netlink_get_link_ingress_data_format
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + struct net_device *dev;
> + struct rmnet_phys_ep_conf_s *config;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> +
> + dev = dev_get_by_name(&init_net, rmnet_header-
> >data_format.dev);
> + if (!dev) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_NO_SUCH_DEVICE;
> + return;
> + }
> +
> + config = _rmnet_get_phys_ep_config(dev);
> + if (!config) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_INVALID_REQUEST;
> + dev_put(dev);
> + return;
> + }
> +
> + /* Begin Data */
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNDATA;
> + resp_rmnet->arg_length = sizeof(((struct rmnet_nl_msg_s *)0)
> + ->data_format);
> + resp_rmnet->data_format.flags = config->ingress_data_format;
> + dev_put(dev);
> +}
> +
> +static void _rmnet_netlink_get_vnd_name
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + int r;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> +
> + r = rmnet_vnd_get_name(rmnet_header->vnd.id, resp_rmnet-
> >vnd.vnd_name,
> + RMNET_MAX_STR_LEN);
> +
> + if (r != 0) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_INVALID_REQUEST;
> + return;
> + }
> +
> + /* Begin Data */
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNDATA;
> + resp_rmnet->arg_length = sizeof(((struct rmnet_nl_msg_s
> *)0)->vnd);
> +}
> +
> +/* rmnet_config_netlink_msg_handler() - Netlink message handler
> callback
> + * @skb: Packet containing netlink messages
> + *
> + * Standard kernel-expected format for a netlink message handler.
> Processes SKBs
> + * which contain RmNet data specific netlink messages.
> + */
> +void rmnet_config_netlink_msg_handler(struct sk_buff *skb)
> +{
> + struct nlmsghdr *nlmsg_header, *resp_nlmsg;
> + struct rmnet_nl_msg_s *rmnet_header, *resp_rmnet;
> + int return_pid, response_data_length;
> + struct sk_buff *skb_response;
> +
> + response_data_length = 0;
> + nlmsg_header = (struct nlmsghdr *)skb->data;
> + rmnet_header = (struct rmnet_nl_msg_s
> *)nlmsg_data(nlmsg_header);
> +
> + if (!nlmsg_header->nlmsg_pid ||
> + (nlmsg_header->nlmsg_len < sizeof(struct nlmsghdr) +
> + sizeof(struct
> rmnet_nl_msg_s)))
> + return;
> +
> + LOGL("Netlink message pid=%d, seq=%d, length=%d,
> rmnet_type=%d",
> + nlmsg_header->nlmsg_pid,
> + nlmsg_header->nlmsg_seq,
> + nlmsg_header->nlmsg_len,
> + rmnet_header->message_type);
> +
> + return_pid = nlmsg_header->nlmsg_pid;
> +
> + skb_response = nlmsg_new(sizeof(struct nlmsghdr)
> + + sizeof(struct rmnet_nl_msg_s),
> + GFP_KERNEL);
> +
> + if (!skb_response) {
> + LOGH("%s", "Failed to allocate response buffer");
> + return;
> + }
> +
> + resp_nlmsg = nlmsg_put(skb_response,
> + 0,
> + nlmsg_header->nlmsg_seq,
> + NLMSG_DONE,
> + sizeof(struct rmnet_nl_msg_s),
> + 0);
> +
> + resp_rmnet = nlmsg_data(resp_nlmsg);
> +
> + if (!resp_rmnet)
> + return;
> +
> + resp_rmnet->message_type = rmnet_header->message_type;
> + rtnl_lock();
> + switch (rmnet_header->message_type) {
> + case RMNET_NETLINK_ASSOCIATE_NETWORK_DEVICE:
> + _rmnet_netlink_associate_network_device
> + (rmnet_header,
> resp_rmnet);
> + break;
> +
> + case RMNET_NETLINK_UNASSOCIATE_NETWORK_DEVICE:
> + _rmnet_netlink_unassociate_network_device
> + (rmnet_header,
> resp_rmnet);
> + break;
> +
> + case RMNET_NETLINK_GET_NETWORK_DEVICE_ASSOCIATED:
> + _rmnet_netlink_get_network_device_associated
> + (rmnet_header,
> resp_rmnet);
> + break;
> +
> + case RMNET_NETLINK_SET_LINK_EGRESS_DATA_FORMAT:
> + _rmnet_netlink_set_link_egress_data_format
> + (rmnet_header,
> resp_rmnet);
> + break;
> +
> + case RMNET_NETLINK_GET_LINK_EGRESS_DATA_FORMAT:
> + _rmnet_netlink_get_link_egress_data_format
> + (rmnet_header,
> resp_rmnet);
> + break;
> +
> + case RMNET_NETLINK_SET_LINK_INGRESS_DATA_FORMAT:
> + _rmnet_netlink_set_link_ingress_data_format
> + (rmnet_header,
> resp_rmnet);
> + break;
> +
> + case RMNET_NETLINK_GET_LINK_INGRESS_DATA_FORMAT:
> + _rmnet_netlink_get_link_ingress_data_format
> + (rmnet_header,
> resp_rmnet);
> + break;
> +
> + case RMNET_NETLINK_SET_LOGICAL_EP_CONFIG:
> + _rmnet_netlink_set_logical_ep_config(rmnet_header,
> resp_rmnet);
> + break;
> +
> + case RMNET_NETLINK_UNSET_LOGICAL_EP_CONFIG:
> + _rmnet_netlink_unset_logical_ep_config(rmnet_header,
> + resp_rmnet);
> + break;
> +
> + case RMNET_NETLINK_GET_LOGICAL_EP_CONFIG:
> + _rmnet_netlink_get_logical_ep_config(rmnet_header,
> resp_rmnet);
> + break;
> +
> + case RMNET_NETLINK_NEW_VND:
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> + resp_rmnet->return_code =
> + rmnet_create_vnd(rmnet_head
> er->vnd.id);
> + break;
> +
> + case RMNET_NETLINK_NEW_VND_WITH_PREFIX:
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> + resp_rmnet->return_code = rmnet_create_vnd_prefix(
> + rmnet_header-
> >vnd.id,
> + rmnet_header-
> >vnd.vnd_name);
> + break;
> +
> + case RMNET_NETLINK_FREE_VND:
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> + /* Please check rmnet_vnd_free_dev documentation
> regarding
> + * the below locking sequence
> + */
> + rtnl_unlock();
> + resp_rmnet->return_code =
> rmnet_free_vnd(rmnet_header->vnd.id);
> + rtnl_lock();
> + break;
> +
> + case RMNET_NETLINK_GET_VND_NAME:
> + _rmnet_netlink_get_vnd_name(rmnet_header,
> resp_rmnet);
> + break;
> +
> + default:
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> + resp_rmnet->return_code =
> RMNET_CONFIG_UNKNOWN_MESSAGE;
> + break;
> + }
> + rtnl_unlock();
> + nlmsg_unicast(nl_socket_handle, skb_response, return_pid);
> + LOGD("%s", "Done processing command");
> +}
> +
> +/* Configuration API */
> +
> +/* rmnet_unassociate_network_device() - Unassociate network device
> + * @dev: Device to unassociate
> + *
> + * Frees all structures generate for device. Unregisters rx_handler
> + * todo: needs to do some sanity verification first (is device in
> use, etc...)
> + *
> + * Return:
> + * - RMNET_CONFIG_OK if successful
> + * - RMNET_CONFIG_NO_SUCH_DEVICE dev is null
> + * - RMNET_CONFIG_INVALID_REQUEST if device is not already
> associated
> + * - RMNET_CONFIG_DEVICE_IN_USE if device has logical ep that
> wasn't unset
> + * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is
> null
> + */
> +int rmnet_unassociate_network_device(struct net_device *dev)
> +{
> + struct rmnet_phys_ep_conf_s *config;
> + int config_id = RMNET_LOCAL_LOGICAL_ENDPOINT;
> + struct rmnet_logical_ep_conf_s *epconfig_l;
> +
> + ASSERT_RTNL();
> +
> + LOGL("(%s);", dev->name);
> +
> + if (!dev)
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> +
> + if (!_rmnet_is_physical_endpoint_associated(dev))
> + return RMNET_CONFIG_INVALID_REQUEST;
> +
> + for (; config_id < RMNET_DATA_MAX_LOGICAL_EP; config_id++) {
> + epconfig_l = _rmnet_get_logical_ep(dev, config_id);
> + if (epconfig_l && epconfig_l->refcount)
> + return RMNET_CONFIG_DEVICE_IN_USE;
> + }
> +
> + config = (struct rmnet_phys_ep_conf_s *)
> + rcu_dereference(dev->rx_handler_data);
> +
> + if (!config)
> + return RMNET_CONFIG_UNKNOWN_ERROR;
> +
> + kfree(config);
> +
> + netdev_rx_handler_unregister(dev);
> +
> + /* Explicitly release the reference from the device */
> + dev_put(dev);
> + trace_rmnet_unassociate(dev);
> + return RMNET_CONFIG_OK;
> +}
> +
> +/* rmnet_set_ingress_data_format() - Set ingress data format on
> network device
> + * @dev: Device to ingress data format on
> + * @egress_data_format: 32-bit unsigned bitmask of ingress format
> + *
> + * Network device must already have association with RmNet Data
> driver
> + *
> + * Return:
> + * - RMNET_CONFIG_OK if successful
> + * - RMNET_CONFIG_NO_SUCH_DEVICE dev is null
> + * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is
> null
> + */
> +int rmnet_set_ingress_data_format(struct net_device *dev,
> + u32 ingress_data_format)
> +{
> + struct rmnet_phys_ep_conf_s *config;
> +
> + ASSERT_RTNL();
> +
> + LOGL("(%s,0x%08X);", dev->name, ingress_data_format);
> +
> + if (!dev)
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> +
> + config = _rmnet_get_phys_ep_config(dev);
> +
> + if (!config)
> + return RMNET_CONFIG_INVALID_REQUEST;
> +
> + config->ingress_data_format = ingress_data_format;
> +
> + return RMNET_CONFIG_OK;
> +}
> +
> +/* rmnet_set_egress_data_format() - Set egress data format on
> network device
> + * @dev: Device to egress data format on
> + * @egress_data_format: 32-bit unsigned bitmask of egress format
> + *
> + * Network device must already have association with RmNet Data
> driver
> + * todo: Bounds check on agg_*
> + *
> + * Return:
> + * - RMNET_CONFIG_OK if successful
> + * - RMNET_CONFIG_NO_SUCH_DEVICE dev is null
> + * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is
> null
> + */
> +int rmnet_set_egress_data_format(struct net_device *dev,
> + u32 egress_data_format,
> + u16 agg_size,
> + u16 agg_count)
> +{
> + struct rmnet_phys_ep_conf_s *config;
> +
> + ASSERT_RTNL();
> +
> + LOGL("(%s,0x%08X, %d, %d);",
> + dev->name, egress_data_format, agg_size, agg_count);
> +
> + if (!dev)
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> +
> + config = _rmnet_get_phys_ep_config(dev);
> +
> + if (!config)
> + return RMNET_CONFIG_UNKNOWN_ERROR;
> +
> + config->egress_data_format = egress_data_format;
> +
> + return RMNET_CONFIG_OK;
> +}
> +
> +/* rmnet_associate_network_device() - Associate network device
> + * @dev: Device to register with RmNet data
> + *
> + * Typically used on physical network devices. Registers RX handler
> and private
> + * metadata structures.
> + *
> + * Return:
> + * - RMNET_CONFIG_OK if successful
> + * - RMNET_CONFIG_NO_SUCH_DEVICE dev is null
> + * - RMNET_CONFIG_INVALID_REQUEST if the device to be
> associated is a vnd
> + * - RMNET_CONFIG_DEVICE_IN_USE if dev rx_handler is already
> filled
> + * - RMNET_CONFIG_DEVICE_IN_USE if netdev_rx_handler_register()
> fails
> + */
> +int rmnet_associate_network_device(struct net_device *dev)
> +{
> + struct rmnet_phys_ep_conf_s *config;
> + int rc;
> +
> + ASSERT_RTNL();
> +
> + LOGL("(%s);\n", dev->name);
> +
> + if (!dev)
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> +
> + if (_rmnet_is_physical_endpoint_associated(dev)) {
> + LOGM("%s is already regestered", dev->name);
> + return RMNET_CONFIG_DEVICE_IN_USE;
> + }
> +
> + if (rmnet_vnd_is_vnd(dev)) {
> + LOGM("%s is a vnd", dev->name);
> + return RMNET_CONFIG_INVALID_REQUEST;
> + }
> +
> + config = kmalloc(sizeof(*config), GFP_ATOMIC);
> +
> + if (!config)
> + return RMNET_CONFIG_NOMEM;
> +
> + memset(config, 0, sizeof(struct rmnet_phys_ep_conf_s));
> + config->dev = dev;
> +
> + rc = netdev_rx_handler_register(dev, rmnet_rx_handler,
> config);
> +
> + if (rc) {
> + LOGM("netdev_rx_handler_register returns %d", rc);
> + kfree(config);
> + return RMNET_CONFIG_DEVICE_IN_USE;
> + }
> +
> + /* Explicitly hold a reference to the device */
> + dev_hold(dev);
> + trace_rmnet_associate(dev);
> + return RMNET_CONFIG_OK;
> +}
> +
> +/* _rmnet_set_logical_endpoint_config() - Set logical endpoing
> config on device
> + * @dev: Device to set endpoint configuration on
> + * @config_id: logical endpoint id on device
> + * @epconfig: endpoing configuration structure to set
> + *
> + * Return:
> + * - RMNET_CONFIG_OK if successful
> + * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is
> null
> + * - RMNET_CONFIG_NO_SUCH_DEVICE if device to set config on is
> null
> + * - RMNET_CONFIG_DEVICE_IN_USE if device already has a logical
> ep
> + * - RMNET_CONFIG_BAD_ARGUMENTS if logical endpoint id is out
> of range
> + */
> +int _rmnet_set_logical_endpoint_config(struct net_device *dev,
> + int config_id,
> + struct
> rmnet_logical_ep_conf_s *epconfig)
> +{
> + struct rmnet_logical_ep_conf_s *epconfig_l;
> +
> + ASSERT_RTNL();
> +
> + if (!dev)
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> +
> + if (config_id < RMNET_LOCAL_LOGICAL_ENDPOINT ||
> + config_id >= RMNET_DATA_MAX_LOGICAL_EP)
> + return RMNET_CONFIG_BAD_ARGUMENTS;
> +
> + epconfig_l = _rmnet_get_logical_ep(dev, config_id);
> +
> + if (!epconfig_l)
> + return RMNET_CONFIG_UNKNOWN_ERROR;
> +
> + if (epconfig_l->refcount)
> + return RMNET_CONFIG_DEVICE_IN_USE;
> +
> + memcpy(epconfig_l, epconfig, sizeof(struct
> rmnet_logical_ep_conf_s));
> + if (config_id == RMNET_LOCAL_LOGICAL_ENDPOINT)
> + epconfig_l->mux_id = 0;
> + else
> + epconfig_l->mux_id = config_id;
> +
> + /* Explicitly hold a reference to the egress device */
> + dev_hold(epconfig_l->egress_dev);
> + return RMNET_CONFIG_OK;
> +}
> +
> +/* _rmnet_unset_logical_endpoint_config() - Un-set the logical
> endpoing config
> + * on device
> + * @dev: Device to set endpoint configuration on
> + * @config_id: logical endpoint id on device
> + *
> + * Return:
> + * - RMNET_CONFIG_OK if successful
> + * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is
> null
> + * - RMNET_CONFIG_NO_SUCH_DEVICE if device to set config on is
> null
> + * - RMNET_CONFIG_BAD_ARGUMENTS if logical endpoint id is out
> of range
> + */
> +int _rmnet_unset_logical_endpoint_config(struct net_device *dev,
> + int config_id)
> +{
> + struct rmnet_logical_ep_conf_s *epconfig_l = 0;
> +
> + ASSERT_RTNL();
> +
> + if (!dev)
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> +
> + if (config_id < RMNET_LOCAL_LOGICAL_ENDPOINT ||
> + config_id >= RMNET_DATA_MAX_LOGICAL_EP)
> + return RMNET_CONFIG_BAD_ARGUMENTS;
> +
> + epconfig_l = _rmnet_get_logical_ep(dev, config_id);
> +
> + if (!epconfig_l || !epconfig_l->refcount)
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> +
> + /* Explicitly release the reference from the egress device
> */
> + dev_put(epconfig_l->egress_dev);
> + memset(epconfig_l, 0, sizeof(struct
> rmnet_logical_ep_conf_s));
> +
> + return RMNET_CONFIG_OK;
> +}
> +
> +/* rmnet_set_logical_endpoint_config() - Set logical endpoint config
> on a device
> + * @dev: Device to set endpoint configuration on
> + * @config_id: logical endpoint id on device
> + * @rmnet_mode: endpoint mode. Values from:
> rmnet_config_endpoint_modes_e
> + * @egress_device: device node to forward packet to once done
> processing in
> + * ingress/egress handlers
> + *
> + * Creates a logical_endpoint_config structure and fills in the
> information from
> + * function arguments. Calls _rmnet_set_logical_endpoint_config() to
> finish
> + * configuration. Network device must already have association with
> RmNet Data
> + * driver
> + *
> + * Return:
> + * - RMNET_CONFIG_OK if successful
> + * - RMNET_CONFIG_BAD_EGRESS_DEVICE if egress device is null
> + * - RMNET_CONFIG_BAD_EGRESS_DEVICE if egress device is not
> handled by
> + * RmNet data module
> + * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is
> null
> + * - RMNET_CONFIG_NO_SUCH_DEVICE if device to set config on is
> null
> + * - RMNET_CONFIG_BAD_ARGUMENTS if logical endpoint id is out
> of range
> + */
> +int rmnet_set_logical_endpoint_config(struct net_device *dev,
> + int config_id,
> + u8 rmnet_mode,
> + struct net_device *egress_dev)
> +{
> + struct rmnet_logical_ep_conf_s epconfig;
> +
> + LOGL("(%s, %d, %d, %s);",
> + dev->name, config_id, rmnet_mode, egress_dev->name);
> +
> + if (!egress_dev ||
> + ((!_rmnet_is_physical_endpoint_associated(egress_dev))
> &&
> + (!rmnet_vnd_is_vnd(egress_dev)))) {
> + return RMNET_CONFIG_BAD_EGRESS_DEVICE;
> + }
> +
> + memset(&epconfig, 0, sizeof(struct
> rmnet_logical_ep_conf_s));
> + epconfig.refcount = 1;
> + epconfig.rmnet_mode = rmnet_mode;
> + epconfig.egress_dev = egress_dev;
> +
> + return _rmnet_set_logical_endpoint_config(dev, config_id,
> &epconfig);
> +}
> +
> +/* rmnet_unset_logical_endpoint_config() - Un-set logical endpoing
> configuration
> + * on a device
> + * @dev: Device to set endpoint configuration on
> + * @config_id: logical endpoint id on device
> + *
> + * Retrieves the logical_endpoint_config structure and frees the
> egress device.
> + * Network device must already have association with RmNet Data
> driver
> + *
> + * Return:
> + * - RMNET_CONFIG_OK if successful
> + * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is
> null
> + * - RMNET_CONFIG_NO_SUCH_DEVICE device is not associated
> + * - RMNET_CONFIG_BAD_ARGUMENTS if logical endpoint id is out
> of range
> + */
> +int rmnet_unset_logical_endpoint_config(struct net_device *dev,
> + int config_id)
> +{
> + LOGL("(%s, %d);", dev->name, config_id);
> +
> + if (!dev ||
> + ((!_rmnet_is_physical_endpoint_associated(dev)) &&
> + (!rmnet_vnd_is_vnd(dev)))) {
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> + }
> +
> + return _rmnet_unset_logical_endpoint_config(dev, config_id);
> +}
> +
> +/* rmnet_get_logical_endpoint_config() - Gets logical endpoing
> configuration
> + * for a device
> + * @dev: Device to get endpoint configuration on
> + * @config_id: logical endpoint id on device
> + * @rmnet_mode: (I/O) logical endpoint mode
> + * @egress_dev_name: (I/O) logical endpoint egress device name
> + * @egress_dev_name_size: The maximal size of the I/O
> egress_dev_name
> + *
> + * Retrieves the logical_endpoint_config structure.
> + * Network device must already have association with RmNet Data
> driver
> + *
> + * Return:
> + * - RMNET_CONFIG_OK if successful
> + * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is
> null
> + * - RMNET_CONFIG_NO_SUCH_DEVICE device is not associated
> + * - RMNET_CONFIG_BAD_ARGUMENTS if logical endpoint id is out
> of range or
> + * if the provided buffer size for egress dev name is too
> short
> + */
> +int rmnet_get_logical_endpoint_config(struct net_device *dev,
> + int config_id,
> + u8 *rmnet_mode,
> + u8 *egress_dev_name,
> + size_t egress_dev_name_size)
> +{
> + struct rmnet_logical_ep_conf_s *epconfig_l = 0;
> + size_t strlcpy_res = 0;
> +
> + LOGL("(%s, %d);", dev->name, config_id);
> +
> + if (!egress_dev_name || !rmnet_mode)
> + return RMNET_CONFIG_BAD_ARGUMENTS;
> + if (config_id < RMNET_LOCAL_LOGICAL_ENDPOINT ||
> + config_id >= RMNET_DATA_MAX_LOGICAL_EP)
> + return RMNET_CONFIG_BAD_ARGUMENTS;
> +
> + epconfig_l = _rmnet_get_logical_ep(dev, config_id);
> +
> + if (!epconfig_l || !epconfig_l->refcount)
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> +
> + *rmnet_mode = epconfig_l->rmnet_mode;
> +
> + strlcpy_res = strlcpy(egress_dev_name, epconfig_l-
> >egress_dev->name,
> + egress_dev_name_size);
> +
> + if (strlcpy_res >= egress_dev_name_size)
> + return RMNET_CONFIG_BAD_ARGUMENTS;
> +
> + return RMNET_CONFIG_OK;
> +}
> +
> +/* rmnet_create_vnd() - Create virtual network device node
> + * @id: RmNet virtual device node id
> + *
> + * Return:
> + * - result of rmnet_vnd_create_dev()
> + */
> +int rmnet_create_vnd(int id)
> +{
> + struct net_device *dev;
> +
> + ASSERT_RTNL();
> + LOGL("(%d);", id);
> + return rmnet_vnd_create_dev(id, &dev, NULL);
> +}
> +
> +/* rmnet_create_vnd() - Create virtual network device node
> + * @id: RmNet virtual device node id
> + * @prefix: String prefix for device name
> + *
> + * Return:
> + * - result of rmnet_vnd_create_dev()
> + */
> +int rmnet_create_vnd_prefix(int id, const char *prefix)
> +{
> + struct net_device *dev;
> +
> + ASSERT_RTNL();
> + LOGL("(%d, \"%s\");", id, prefix);
> + return rmnet_vnd_create_dev(id, &dev, prefix);
> +}
> +
> +/* rmnet_free_vnd() - Free virtual network device node
> + * @id: RmNet virtual device node id
> + *
> + * Return:
> + * - result of rmnet_vnd_free_dev()
> + */
> +int rmnet_free_vnd(int id)
> +{
> + LOGL("(%d);", id);
> + return rmnet_vnd_free_dev(id);
> +}
> +
> +static void _rmnet_free_vnd_later(struct work_struct *work)
> +{
> + int i;
> + struct rmnet_free_vnd_work *fwork;
> +
> + fwork = container_of(work, struct rmnet_free_vnd_work,
> work);
> +
> + for (i = 0; i < fwork->count; i++)
> + rmnet_free_vnd(fwork->vnd_id[i]);
> + kfree(fwork);
> +}
> +
> +/* rmnet_force_unassociate_device() - Force a device to unassociate
> + * @dev: Device to unassociate
> + *
> + * Return:
> + * - void
> + */
> +static void rmnet_force_unassociate_device(struct net_device *dev)
> +{
> + int i, j;
> + struct net_device *vndev;
> + struct rmnet_logical_ep_conf_s *cfg;
> + struct rmnet_free_vnd_work *vnd_work;
> +
> + ASSERT_RTNL();
> + if (!dev)
> + return;
> +
> + if (!_rmnet_is_physical_endpoint_associated(dev)) {
> + LOGM("%s", "Called on unassociated device,
> skipping");
> + return;
> + }
> +
> + trace_rmnet_unregister_cb_clear_vnds(dev);
> + vnd_work = kmalloc(sizeof(*vnd_work), GFP_KERNEL);
> + if (!vnd_work) {
> + LOGH("%s", "Out of Memory");
> + return;
> + }
> + INIT_WORK(&vnd_work->work, _rmnet_free_vnd_later);
> + vnd_work->count = 0;
> +
> + /* Check the VNDs for offending mappings */
> + for (i = 0, j = 0; i < RMNET_DATA_MAX_VND &&
> + j < RMNET_DATA_MAX_VND; i++) {
> + vndev = rmnet_vnd_get_by_id(i);
> + if (!vndev) {
> + LOGL("VND %d not in use; skipping", i);
> + continue;
> + }
> + cfg = rmnet_vnd_get_le_config(vndev);
> + if (!cfg) {
> + LOGH("Got NULL config from VND %d", i);
> + continue;
> + }
> + if (cfg->refcount && (cfg->egress_dev == dev)) {
> + /* Make sure the device is down before
> clearing any of
> + * the mappings. Otherwise we could see a
> potential
> + * race condition if packets are actively
> being
> + * transmitted.
> + */
> + dev_close(vndev);
> + rmnet_unset_logical_endpoint_config
> + (vndev,
> RMNET_LOCAL_LOGICAL_ENDPOINT);
> + vnd_work->vnd_id[j] = i;
> + j++;
> + }
> + }
> + if (j > 0) {
> + vnd_work->count = j;
> + schedule_work(&vnd_work->work);
> + } else {
> + kfree(vnd_work);
> + }
> +
> + /* Clear the mappings on the phys ep */
> + trace_rmnet_unregister_cb_clear_lepcs(dev);
> + rmnet_unset_logical_endpoint_config(dev,
> RMNET_LOCAL_LOGICAL_ENDPOINT);
> + for (i = 0; i < RMNET_DATA_MAX_LOGICAL_EP; i++)
> + rmnet_unset_logical_endpoint_config(dev, i);
> + rmnet_unassociate_network_device(dev);
> +}
> +
> +/* rmnet_config_notify_cb() - Callback for netdevice notifier chain
> + * @nb: Notifier block data
> + * @event: Netdevice notifier event ID
> + * @data: Contains a net device for which we are getting
> notified
> + *
> + * Return:
> + * - result of NOTIFY_DONE()
> + */
> +int rmnet_config_notify_cb(struct notifier_block *nb,
> + unsigned long event, void *data)
> +{
> + struct net_device *dev = netdev_notifier_info_to_dev(data);
> +
> + if (!dev)
> + return NOTIFY_DONE;
> +
> + switch (event) {
> + case NETDEV_UNREGISTER_FINAL:
> + case NETDEV_UNREGISTER:
> + trace_rmnet_unregister_cb_entry(dev);
> + LOGH("Kernel is trying to unregister %s", dev-
> >name);
> + rmnet_force_unassociate_device(dev);
> + trace_rmnet_unregister_cb_exit(dev);
> + break;
> +
> + default:
> + trace_rmnet_unregister_cb_unhandled(dev);
> + LOGD("Unhandeled event [%lu]", event);
> + break;
> + }
> +
> + return NOTIFY_DONE;
> +}
> diff --git a/net/rmnet_data/rmnet_data_config.h
> b/net/rmnet_data/rmnet_data_config.h
> new file mode 100644
> index 0000000..f9da3c6
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_config.h
> @@ -0,0 +1,107 @@
> +/* Copyright (c) 2013-2014, 2016-2017 The Linux Foundation. All
> rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * RMNET Data configuration engine
> + *
> + */
> +
> +#include <linux/types.h>
> +#include <linux/time.h>
> +#include <linux/skbuff.h>
> +
> +#ifndef _RMNET_DATA_CONFIG_H_
> +#define _RMNET_DATA_CONFIG_H_
> +
> +#define RMNET_DATA_MAX_LOGICAL_EP 256
> +
> +/* struct rmnet_logical_ep_conf_s - Logical end-point configuration
> + *
> + * @refcount: Reference count for this endpoint. 0 signifies the
> endpoint is not
> + * configured for use
> + * @rmnet_mode: Specifies how the traffic should be finally
> delivered. Possible
> + * options are available in enum
> rmnet_config_endpoint_modes_e
> + * @mux_id: Virtual channel ID used by MAP protocol
> + * @egress_dev: Next device to deliver the packet to. Exact usage of
> this
> + * parmeter depends on the rmnet_mode
> + */
> +struct rmnet_logical_ep_conf_s {
> + u8 refcount;
> + u8 rmnet_mode;
> + u8 mux_id;
> + struct timespec flush_time;
> + struct net_device *egress_dev;
> +};
> +
> +/* struct rmnet_phys_ep_conf_s - Physical endpoint configuration
> + * One instance of this structure is instantiated for each
> net_device associated
> + * with rmnet_data.
> + *
> + * @dev: The device which is associated with rmnet_data. Corresponds
> to this
> + * specific instance of rmnet_phys_ep_conf_s
> + * @local_ep: Default non-muxed endpoint. Used for non-MAP
> protocols/formats
> + * @muxed_ep: All multiplexed logical endpoints associated with this
> device
> + * @ingress_data_format: RMNET_INGRESS_FORMAT_* flags from
> rmnet_data.h
> + * @egress_data_format: RMNET_EGRESS_FORMAT_* flags from
> rmnet_data.h
> + *
> + * @egress_agg_size: Maximum size (bytes) of data which should be
> aggregated
> + * @egress_agg_count: Maximum count (packets) of data which should
> be aggregated
> + * Smaller of the two parameters above are chosen
> for
> + * aggregation
> + * @tail_spacing: Guaranteed padding (bytes) when de-aggregating
> ingress frames
> + * @agg_time: Wall clock time when aggregated frame was created
> + * @agg_last: Last time the aggregation routing was invoked
> + */
> +struct rmnet_phys_ep_conf_s {
> + struct net_device *dev;
> + struct rmnet_logical_ep_conf_s local_ep;
> + struct rmnet_logical_ep_conf_s
> muxed_ep[RMNET_DATA_MAX_LOGICAL_EP];
> + u32 ingress_data_format;
> + u32 egress_data_format;
> +};
> +
> +int rmnet_config_init(void);
> +void rmnet_config_exit(void);
> +
> +int rmnet_unassociate_network_device(struct net_device *dev);
> +int rmnet_set_ingress_data_format(struct net_device *dev,
> + u32 ingress_data_format);
> +int rmnet_set_egress_data_format(struct net_device *dev,
> + u32 egress_data_format,
> + u16 agg_size,
> + u16 agg_count);
> +int rmnet_associate_network_device(struct net_device *dev);
> +int _rmnet_set_logical_endpoint_config(struct net_device *dev,
> + int config_id,
> + struct rmnet_logical_ep_conf_s
> *epconfig);
> +int rmnet_set_logical_endpoint_config(struct net_device *dev,
> + int config_id,
> + u8 rmnet_mode,
> + struct net_device
> *egress_dev);
> +int _rmnet_unset_logical_endpoint_config(struct net_device *dev,
> + int config_id);
> +int rmnet_unset_logical_endpoint_config(struct net_device *dev,
> + int config_id);
> +int _rmnet_get_logical_endpoint_config(struct net_device *dev,
> + int config_id,
> + struct rmnet_logical_ep_conf_s
> *epconfig);
> +int rmnet_get_logical_endpoint_config(struct net_device *dev,
> + int config_id,
> + u8 *rmnet_mode,
> + u8 *egress_dev_name,
> + size_t egress_dev_name_size);
> +void rmnet_config_netlink_msg_handler (struct sk_buff *skb);
> +int rmnet_config_notify_cb(struct notifier_block *nb,
> + unsigned long event, void *data);
> +int rmnet_create_vnd(int id);
> +int rmnet_create_vnd_prefix(int id, const char *name);
> +int rmnet_free_vnd(int id);
> +
> +#endif /* _RMNET_DATA_CONFIG_H_ */
> diff --git a/net/rmnet_data/rmnet_data_handlers.c
> b/net/rmnet_data/rmnet_data_handlers.c
> new file mode 100644
> index 0000000..e95d1ef
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_handlers.c
> @@ -0,0 +1,556 @@
> +/* Copyright (c) 2013-2017, The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * RMNET Data ingress/egress handler
> + *
> + */
> +
> +#include <linux/skbuff.h>
> +#include <linux/netdevice.h>
> +#include <linux/module.h>
> +#include <linux/rmnet_data.h>
> +#include <linux/netdev_features.h>
> +#include <linux/ip.h>
> +#include <linux/ipv6.h>
> +#include "rmnet_data_private.h"
> +#include "rmnet_data_config.h"
> +#include "rmnet_data_vnd.h"
> +#include "rmnet_map.h"
> +#include "rmnet_data_stats.h"
> +#include "rmnet_data_trace.h"
> +#include "rmnet_data_handlers.h"
> +
> +RMNET_LOG_MODULE(RMNET_DATA_LOGMASK_HANDLER);
> +
> +#ifdef CONFIG_RMNET_DATA_DEBUG
> +unsigned int dump_pkt_rx;
> +module_param(dump_pkt_rx, uint, 0644);
> +MODULE_PARM_DESC(dump_pkt_rx, "Dump packets entering ingress
> handler");
> +
> +unsigned int dump_pkt_tx;
> +module_param(dump_pkt_tx, uint, 0644);
> +MODULE_PARM_DESC(dump_pkt_tx, "Dump packets exiting egress
> handler");
> +#endif /* CONFIG_RMNET_DATA_DEBUG */
> +
> +#define RMNET_DATA_IP_VERSION_4 0x40
> +#define RMNET_DATA_IP_VERSION_6 0x60
> +
> +/* Helper Functions */
> +
> +/* __rmnet_data_set_skb_proto() - Set skb->protocol field
> + * @skb: packet being modified
> + *
> + * Peek at the first byte of the packet and set the protocol. There
> is not
> + * good way to determine if a packet has a MAP header. As of writing
> this,
> + * the reserved bit in the MAP frame will prevent it from
> overlapping with
> + * IPv4/IPv6 frames. This could change in the future!
> + */
> +static inline void __rmnet_data_set_skb_proto(struct sk_buff *skb)
> +{
> + switch (skb->data[0] & 0xF0) {
> + case RMNET_DATA_IP_VERSION_4:
> + skb->protocol = htons(ETH_P_IP);
> + break;
> + case RMNET_DATA_IP_VERSION_6:
> + skb->protocol = htons(ETH_P_IPV6);
> + break;
> + default:
> + skb->protocol = htons(ETH_P_MAP);
> + break;
> + }
> +}
> +
> +#ifdef CONFIG_RMNET_DATA_DEBUG
> +/* rmnet_print_packet() - Print packet / diagnostics
> + * @skb: Packet to print
> + * @printlen: Number of bytes to print
> + * @dev: Name of interface
> + * @dir: Character representing direction (e.g.. 'r' for
> receive)
> + *
> + * This function prints out raw bytes in an SKB. Use of this will
> have major
> + * performance impacts and may even trigger watchdog resets if too
> much is being
> + * printed. Hence, this should always be compiled out unless
> absolutely needed.
> + */
> +void rmnet_print_packet(const struct sk_buff *skb, const char *dev,
> char dir)
> +{
> + char buffer[200];
> + unsigned int len, printlen;
> + int i, buffloc = 0;
> +
> + switch (dir) {
> + case 'r':
> + printlen = dump_pkt_rx;
> + break;
> +
> + case 't':
> + printlen = dump_pkt_tx;
> + break;
> +
> + default:
> + printlen = 0;
> + break;
> + }
> +
> + if (!printlen)
> + return;
> +
> + pr_err("[%s][%c] - PKT skb->len=%d skb->head=%pK skb-
> >data=%pK\n",
> + dev, dir, skb->len, (void *)skb->head, (void *)skb-
> >data);
> + pr_err("[%s][%c] - PKT skb->tail=%pK skb->end=%pK\n",
> + dev, dir, skb_tail_pointer(skb),
> skb_end_pointer(skb));
> +
> + if (skb->len > 0)
> + len = skb->len;
> + else
> + len = ((unsigned int)(uintptr_t)skb->end) -
> + ((unsigned int)(uintptr_t)skb->data);
> +
> + pr_err("[%s][%c] - PKT len: %d, printing first %d bytes\n",
> + dev, dir, len, printlen);
> +
> + memset(buffer, 0, sizeof(buffer));
> + for (i = 0; (i < printlen) && (i < len); i++) {
> + if ((i % 16) == 0) {
> + pr_err("[%s][%c] - PKT%s\n", dev, dir,
> buffer);
> + memset(buffer, 0, sizeof(buffer));
> + buffloc = 0;
> + buffloc += snprintf(&buffer[buffloc],
> + sizeof(buffer) - buffloc,
> "%04X:",
> + i);
> + }
> +
> + buffloc += snprintf(&buffer[buffloc], sizeof(buffer)
> - buffloc,
> + " %02x", skb->data[i]);
> + }
> + pr_err("[%s][%c] - PKT%s\n", dev, dir, buffer);
> +}
> +#else
> +void rmnet_print_packet(const struct sk_buff *skb, const char *dev,
> char dir)
> +{
> +}
> +#endif /* CONFIG_RMNET_DATA_DEBUG */
> +
> +/* Generic handler */
> +
> +/* rmnet_bridge_handler() - Bridge related functionality
> + *
> + * Return:
> + * - RX_HANDLER_CONSUMED in all cases
> + */
> +static rx_handler_result_t rmnet_bridge_handler
> + (struct sk_buff *skb, struct rmnet_logical_ep_conf_s *ep)
> +{
> + if (!ep->egress_dev) {
> + LOGD("Missing egress device for packet arriving on
> %s",
> + skb->dev->name);
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_BRDG_NO_EGRESS);
> + } else {
> + rmnet_egress_handler(skb, ep);
> + }
> +
> + return RX_HANDLER_CONSUMED;
> +}
> +
> +#ifdef NET_SKBUFF_DATA_USES_OFFSET
> +static void rmnet_reset_mac_header(struct sk_buff *skb)
> +{
> + skb->mac_header = 0;
> + skb->mac_len = 0;
> +}
> +#else
> +static void rmnet_reset_mac_header(struct sk_buff *skb)
> +{
> + skb->mac_header = skb->network_header;
> + skb->mac_len = 0;
> +}
> +#endif /*NET_SKBUFF_DATA_USES_OFFSET*/
> +
> +/* __rmnet_deliver_skb() - Deliver skb
> + *
> + * Determines where to deliver skb. Options are: consume by network
> stack,
> + * pass to bridge handler, or pass to virtual network device
> + *
> + * Return:
> + * - RX_HANDLER_CONSUMED if packet forwarded or dropped
> + * - RX_HANDLER_PASS if packet is to be consumed by network
> stack as-is
> + */
> +static rx_handler_result_t __rmnet_deliver_skb
> + (struct sk_buff *skb, struct rmnet_logical_ep_conf_s *ep)
> +{
> + trace___rmnet_deliver_skb(skb);
> + switch (ep->rmnet_mode) {
> + case RMNET_EPMODE_NONE:
> + return RX_HANDLER_PASS;
> +
> + case RMNET_EPMODE_BRIDGE:
> + return rmnet_bridge_handler(skb, ep);
> +
> + case RMNET_EPMODE_VND:
> + skb_reset_transport_header(skb);
> + skb_reset_network_header(skb);
> + switch (rmnet_vnd_rx_fixup(skb, skb->dev)) {
> + case RX_HANDLER_CONSUMED:
> + return RX_HANDLER_CONSUMED;
> +
> + case RX_HANDLER_PASS:
> + skb->pkt_type = PACKET_HOST;
> + rmnet_reset_mac_header(skb);
> + netif_receive_skb(skb);
> + return RX_HANDLER_CONSUMED;
> + }
> + return RX_HANDLER_PASS;
> +
> + default:
> + LOGD("Unknown ep mode %d", ep->rmnet_mode);
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_DELIVER_NO_EP);
> + return RX_HANDLER_CONSUMED;
> + }
> +}
> +
> +/* rmnet_ingress_deliver_packet() - Ingress handler for raw IP and
> bridged
> + * MAP packets.
> + * @skb: Packet needing a destination.
> + * @config: Physical end point configuration that the packet
> arrived on.
> + *
> + * Return:
> + * - RX_HANDLER_CONSUMED if packet forwarded/dropped
> + * - RX_HANDLER_PASS if packet should be passed up the stack by
> caller
> + */
> +static rx_handler_result_t rmnet_ingress_deliver_packet
> + (struct sk_buff *skb, struct rmnet_phys_ep_conf_s *config)
> +{
> + if (!config) {
> + LOGD("%s", "NULL physical EP provided");
> + kfree_skb(skb);
> + return RX_HANDLER_CONSUMED;
> + }
> +
> + if (!(config->local_ep.refcount)) {
> + LOGD("Packet on %s has no local endpoint
> configuration",
> + skb->dev->name);
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_IPINGRESS_NO_EP);
> + return RX_HANDLER_CONSUMED;
> + }
> +
> + skb->dev = config->local_ep.egress_dev;
> +
> + return __rmnet_deliver_skb(skb, &config->local_ep);
> +}
> +
> +/* MAP handler */
> +
> +/* _rmnet_map_ingress_handler() - Actual MAP ingress handler
> + * @skb: Packet being received
> + * @config: Physical endpoint configuration for the ingress
> device
> + *
> + * Most MAP ingress functions are processed here. Packets are
> processed
> + * individually; aggregated packets should use
> rmnet_map_ingress_handler()
> + *
> + * Return:
> + * - RX_HANDLER_CONSUMED if packet is dropped
> + * - result of __rmnet_deliver_skb() for all other cases
> + */
> +static rx_handler_result_t _rmnet_map_ingress_handler
> + (struct sk_buff *skb, struct rmnet_phys_ep_conf_s *config)
> +{
> + struct rmnet_logical_ep_conf_s *ep;
> + u8 mux_id;
> + u16 len;
> +
> + if (RMNET_MAP_GET_CD_BIT(skb)) {
> + if (config->ingress_data_format
> + & RMNET_INGRESS_FORMAT_MAP_COMMANDS)
> + return rmnet_map_command(skb, config);
> +
> + LOGM("MAP command packet on %s; %s", skb->dev->name,
> + "Not configured for MAP commands");
> + rmnet_kfree_skb(skb,
> + RMNET_STATS_SKBFREE_INGRESS_NOT_EXPE
> CT_MAPC);
> + return RX_HANDLER_CONSUMED;
> + }
> +
> + mux_id = RMNET_MAP_GET_MUX_ID(skb);
> + len = RMNET_MAP_GET_LENGTH(skb) - RMNET_MAP_GET_PAD(skb);
> +
> + if (mux_id >= RMNET_DATA_MAX_LOGICAL_EP) {
> + LOGD("Got packet on %s with bad mux id %d",
> + skb->dev->name, mux_id);
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_MAPINGRESS_BAD_MUX);
> + return RX_HANDLER_CONSUMED;
> + }
> +
> + ep = &config->muxed_ep[mux_id];
> +
> + if (!ep->refcount) {
> + LOGD("Packet on %s:%d; has no logical endpoint
> config",
> + skb->dev->name, mux_id);
> +
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_MAPINGRESS_MUX_NO_EP);
> + return RX_HANDLER_CONSUMED;
> + }
> +
> + if (config->ingress_data_format &
> RMNET_INGRESS_FORMAT_DEMUXING)
> + skb->dev = ep->egress_dev;
> +
> + /* Subtract MAP header */
> + skb_pull(skb, sizeof(struct rmnet_map_header_s));
> + skb_trim(skb, len);
> + __rmnet_data_set_skb_proto(skb);
> + return __rmnet_deliver_skb(skb, ep);
> +}
> +
> +/* rmnet_map_ingress_handler() - MAP ingress handler
> + * @skb: Packet being received
> + * @config: Physical endpoint configuration for the ingress
> device
> + *
> + * Called if and only if MAP is configured in the ingress device's
> ingress data
> + * format. Deaggregation is done here, actual MAP processing is done
> in
> + * _rmnet_map_ingress_handler().
> + *
> + * Return:
> + * - RX_HANDLER_CONSUMED for aggregated packets
> + * - RX_HANDLER_CONSUMED for dropped packets
> + * - result of _rmnet_map_ingress_handler() for all other cases
> + */
> +static rx_handler_result_t rmnet_map_ingress_handler
> + (struct sk_buff *skb, struct rmnet_phys_ep_conf_s *config)
> +{
> + struct sk_buff *skbn;
> + int rc, co = 0;
> +
> + if (config->ingress_data_format &
> RMNET_INGRESS_FORMAT_DEAGGREGATION) {
> + trace_rmnet_start_deaggregation(skb);
> + while ((skbn = rmnet_map_deaggregate(skb, config))
> != NULL) {
> + _rmnet_map_ingress_handler(skbn, config);
> + co++;
> + }
> + trace_rmnet_end_deaggregation(skb, co);
> + LOGD("De-aggregated %d packets", co);
> + rmnet_stats_deagg_pkts(co);
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_MAPINGRESS_AGGBUF);
> + rc = RX_HANDLER_CONSUMED;
> + } else {
> + rc = _rmnet_map_ingress_handler(skb, config);
> + }
> +
> + return rc;
> +}
> +
> +/* rmnet_map_egress_handler() - MAP egress handler
> + * @skb: Packet being sent
> + * @config: Physical endpoint configuration for the egress
> device
> + * @ep: logical endpoint configuration of the packet
> originator
> + * (e.g.. RmNet virtual network device)
> + * @orig_dev: The originator vnd device
> + *
> + * Called if and only if MAP is configured in the egress device's
> egress data
> + * format. Will expand skb if there is insufficient headroom for MAP
> protocol.
> + * Note: headroomexpansion will incur a performance penalty.
> + *
> + * Return:
> + * - 0 on success
> + * - 1 on failure
> + */
> +static int rmnet_map_egress_handler(struct sk_buff *skb,
> + struct rmnet_phys_ep_conf_s
> *config,
> + struct rmnet_logical_ep_conf_s
> *ep,
> + struct net_device *orig_dev)
> +{
> + int required_headroom, additional_header_length;
> + struct rmnet_map_header_s *map_header;
> +
> + additional_header_length = 0;
> + required_headroom = sizeof(struct rmnet_map_header_s);
> +
> + LOGD("headroom of %d bytes", required_headroom);
> +
> + if (skb_headroom(skb) < required_headroom) {
> + if (pskb_expand_head(skb, required_headroom, 0,
> GFP_KERNEL)) {
> + LOGD("Failed to add headroom of %d bytes",
> + required_headroom);
> + return RMNET_MAP_CONSUMED;
> + }
> + }
> +
> + map_header = rmnet_map_add_map_header
> + (skb, additional_header_length,
> RMNET_MAP_NO_PAD_BYTES);
> +
> + if (!map_header) {
> + LOGD("%s", "Failed to add MAP header to egress
> packet");
> + return RMNET_MAP_CONSUMED;
> + }
> +
> + if (config->egress_data_format & RMNET_EGRESS_FORMAT_MUXING)
> {
> + if (ep->mux_id == 0xff)
> + map_header->mux_id = 0;
> + else
> + map_header->mux_id = ep->mux_id;
> + }
> +
> + skb->protocol = htons(ETH_P_MAP);
> +
> + return RMNET_MAP_SUCCESS;
> +}
> +
> +/* Ingress / Egress Entry Points */
> +
> +/* rmnet_ingress_handler() - Ingress handler entry point
> + * @skb: Packet being received
> + *
> + * Processes packet as per ingress data format for receiving device.
> Logical
> + * endpoint is determined from packet inspection. Packet is then
> sent to the
> + * egress device listed in the logical endpoint configuration.
> + *
> + * Return:
> + * - RX_HANDLER_PASS if packet is not processed by handler
> (caller must
> + * deal with the packet)
> + * - RX_HANDLER_CONSUMED if packet is forwarded or processed by
> MAP
> + */
> +rx_handler_result_t rmnet_ingress_handler(struct sk_buff *skb)
> +{
> + struct rmnet_phys_ep_conf_s *config;
> + struct net_device *dev;
> + int rc;
> +
> + if (!skb)
> + return RX_HANDLER_CONSUMED;
> +
> + dev = skb->dev;
> + trace_rmnet_ingress_handler(skb);
> + rmnet_print_packet(skb, dev->name, 'r');
> +
> + config = (struct rmnet_phys_ep_conf_s *)
> + rcu_dereference(skb->dev->rx_handler_data);
> +
> + if (!config) {
> + LOGD("%s is not associated with rmnet_data", skb-
> >dev->name);
> + kfree_skb(skb);
> + return RX_HANDLER_CONSUMED;
> + }
> +
> + /* Sometimes devices operate in ethernet mode even thouth
> there is no
> + * ethernet header. This causes the skb->protocol to contain
> a bogus
> + * value and the skb->data pointer to be off by 14 bytes.
> Fix it if
> + * configured to do so
> + */
> + if (config->ingress_data_format &
> RMNET_INGRESS_FIX_ETHERNET) {
> + skb_push(skb, RMNET_ETHERNET_HEADER_LENGTH);
> + __rmnet_data_set_skb_proto(skb);
> + }
> +
> + if (config->ingress_data_format & RMNET_INGRESS_FORMAT_MAP)
> {
> + rc = rmnet_map_ingress_handler(skb, config);
> + } else {
> + switch (ntohs(skb->protocol)) {
> + case ETH_P_MAP:
> + if (config->local_ep.rmnet_mode ==
> + RMNET_EPMODE_BRIDGE) {
> + rc =
> rmnet_ingress_deliver_packet(skb, config);
> + } else {
> + LOGD("MAP packet on %s; MAP not
> set",
> + dev->name);
> + rmnet_kfree_skb
> + (skb,
> + RMNET_STATS_SKBFREE_INGRESS_NOT_EXP
> ECT_MAPD);
> + rc = RX_HANDLER_CONSUMED;
> + }
> + break;
> +
> + case ETH_P_ARP:
> + case ETH_P_IP:
> + case ETH_P_IPV6:
> + rc = rmnet_ingress_deliver_packet(skb,
> config);
> + break;
> +
> + default:
> + LOGD("Unknown skb->proto 0x%04X\n",
> + ntohs(skb->protocol) & 0xFFFF);
> + rc = RX_HANDLER_PASS;
> + }
> + }
> +
> + return rc;
> +}
> +
> +/* rmnet_rx_handler() - Rx handler callback registered with kernel
> + * @pskb: Packet to be processed by rx handler
> + *
> + * Standard kernel-expected footprint for rx handlers. Calls
> + * rmnet_ingress_handler with correctly formatted arguments
> + *
> + * Return:
> + * - Whatever rmnet_ingress_handler() returns
> + */
> +rx_handler_result_t rmnet_rx_handler(struct sk_buff **pskb)
> +{
> + return rmnet_ingress_handler(*pskb);
> +}
> +
> +/* rmnet_egress_handler() - Egress handler entry point
> + * @skb: packet to transmit
> + * @ep: logical endpoint configuration of the packet
> originator
> + * (e.g.. RmNet virtual network device)
> + *
> + * Modifies packet as per logical endpoint configuration and egress
> data format
> + * for egress device configured in logical endpoint. Packet is then
> transmitted
> + * on the egress device.
> + */
> +void rmnet_egress_handler(struct sk_buff *skb,
> + struct rmnet_logical_ep_conf_s *ep)
> +{
> + struct rmnet_phys_ep_conf_s *config;
> + struct net_device *orig_dev;
> + int rc;
> +
> + orig_dev = skb->dev;
> + skb->dev = ep->egress_dev;
> +
> + config = (struct rmnet_phys_ep_conf_s *)
> + rcu_dereference(skb->dev->rx_handler_data);
> +
> + if (!config) {
> + LOGD("%s is not associated with rmnet_data", skb-
> >dev->name);
> + kfree_skb(skb);
> + return;
> + }
> +
> + LOGD("Packet going out on %s with egress format 0x%08X",
> + skb->dev->name, config->egress_data_format);
> +
> + if (config->egress_data_format & RMNET_EGRESS_FORMAT_MAP) {
> + switch (rmnet_map_egress_handler(skb, config, ep,
> orig_dev)) {
> + case RMNET_MAP_CONSUMED:
> + LOGD("%s", "MAP process consumed packet");
> + return;
> +
> + case RMNET_MAP_SUCCESS:
> + break;
> +
> + default:
> + LOGD("MAP egress failed on packet on %s",
> + skb->dev->name);
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_EGR_MAPFAIL);
> + return;
> + }
> + }
> +
> + if (ep->rmnet_mode == RMNET_EPMODE_VND)
> + rmnet_vnd_tx_fixup(skb, orig_dev);
> +
> + rmnet_print_packet(skb, skb->dev->name, 't');
> + trace_rmnet_egress_handler(skb);
> + rc = dev_queue_xmit(skb);
> + if (rc != 0) {
> + LOGD("Failed to queue packet for transmission on
> [%s]",
> + skb->dev->name);
> + }
> + rmnet_stats_queue_xmit(rc, RMNET_STATS_QUEUE_XMIT_EGRESS);
> +}
> diff --git a/net/rmnet_data/rmnet_data_handlers.h
> b/net/rmnet_data/rmnet_data_handlers.h
> new file mode 100644
> index 0000000..85a590c
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_handlers.h
> @@ -0,0 +1,24 @@
> +/* Copyright (c) 2013, 2016-2017 The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * RMNET Data ingress/egress handler
> + *
> + */
> +
> +#ifndef _RMNET_DATA_HANDLERS_H_
> +#define _RMNET_DATA_HANDLERS_H_
> +
> +void rmnet_egress_handler(struct sk_buff *skb,
> + struct rmnet_logical_ep_conf_s *ep);
> +
> +rx_handler_result_t rmnet_rx_handler(struct sk_buff **pskb);
> +
> +#endif /* _RMNET_DATA_HANDLERS_H_ */
> diff --git a/net/rmnet_data/rmnet_data_main.c
> b/net/rmnet_data/rmnet_data_main.c
> new file mode 100644
> index 0000000..f0e1ec6
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_main.c
> @@ -0,0 +1,60 @@
> +/* Copyright (c) 2013-2014, 2016-2017 The Linux Foundation. All
> rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + *
> + * RMNET Data generic framework
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/export.h>
> +#include "rmnet_data_private.h"
> +#include "rmnet_data_config.h"
> +#include "rmnet_data_vnd.h"
> +
> +/* Trace Points */
> +#define CREATE_TRACE_POINTS
> +#include "rmnet_data_trace.h"
> +
> +/* Module Parameters */
> +unsigned int rmnet_data_log_level = RMNET_LOG_LVL_ERR |
> RMNET_LOG_LVL_HI;
> +module_param(rmnet_data_log_level, uint, 0644);
> +MODULE_PARM_DESC(log_level, "Logging level");
> +
> +unsigned int rmnet_data_log_module_mask;
> +module_param(rmnet_data_log_module_mask, uint, 0644);
> +MODULE_PARM_DESC(rmnet_data_log_module_mask, "Logging module mask");
> +
> +/* Startup/Shutdown */
> +
> +/* rmnet_init() - Module initialization
> + *
> + * todo: check for (and init) startup errors
> + */
> +static int __init rmnet_init(void)
> +{
> + rmnet_config_init();
> + rmnet_vnd_init();
> +
> + LOGL("%s", "RMNET Data driver loaded successfully");
> + return 0;
> +}
> +
> +static void __exit rmnet_exit(void)
> +{
> + rmnet_config_exit();
> + rmnet_vnd_exit();
> +}
> +
> +module_init(rmnet_init)
> +module_exit(rmnet_exit)
> +MODULE_LICENSE("GPL v2");
> diff --git a/net/rmnet_data/rmnet_data_private.h
> b/net/rmnet_data/rmnet_data_private.h
> new file mode 100644
> index 0000000..1dfddc1
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_private.h
> @@ -0,0 +1,76 @@
> +/* Copyright (c) 2013-2014, 2016-2017 The Linux Foundation. All
> rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef _RMNET_DATA_PRIVATE_H_
> +#define _RMNET_DATA_PRIVATE_H_
> +
> +#define RMNET_DATA_MAX_VND 32
> +#define RMNET_DATA_MAX_PACKET_SIZE 16384
> +#define RMNET_DATA_DFLT_PACKET_SIZE 1500
> +#define RMNET_DATA_DEV_NAME_STR "rmnet_data"
> +#define RMNET_DATA_NEEDED_HEADROOM 16
> +#define RMNET_DATA_TX_QUEUE_LEN 1000
> +#define RMNET_ETHERNET_HEADER_LENGTH 14
> +
> +extern unsigned int rmnet_data_log_level;
> +extern unsigned int rmnet_data_log_module_mask;
> +
> +#define RMNET_INIT_OK 0
> +#define RMNET_INIT_ERROR 1
> +
> +#define RMNET_LOG_LVL_DBG BIT(4)
> +#define RMNET_LOG_LVL_LOW BIT(3)
> +#define RMNET_LOG_LVL_MED BIT(2)
> +#define RMNET_LOG_LVL_HI BIT(1)
> +#define RMNET_LOG_LVL_ERR BIT(0)
> +
> +#define RMNET_LOG_MODULE(X) \
> + static u32 rmnet_mod_mask = X
> +
> +#define RMNET_DATA_LOGMASK_CONFIG BIT(0)
> +#define RMNET_DATA_LOGMASK_HANDLER BIT(1)
> +#define RMNET_DATA_LOGMASK_VND BIT(2)
> +#define RMNET_DATA_LOGMASK_MAPD BIT(3)
> +#define RMNET_DATA_LOGMASK_MAPC BIT(4)
> +
> +#define LOGE(fmt, ...) do { if (rmnet_data_log_level &
> RMNET_LOG_LVL_ERR) \
> + pr_err("[RMNET:ERR] %s(): " fmt "\n",
> __func__, \
> + ##__VA_ARGS__); \
> + } while (0)
> +
> +#define LOGH(fmt, ...) do { if (rmnet_data_log_level &
> RMNET_LOG_LVL_HI) \
> + pr_err("[RMNET:HI] %s(): " fmt "\n",
> __func__, \
> + ##__VA_ARGS__); \
> + } while (0)
> +
> +#define LOGM(fmt, ...) do { if (rmnet_data_log_level &
> RMNET_LOG_LVL_MED) \
> + pr_warn("[RMNET:MED] %s(): " fmt "\n",
> __func__, \
> + ##__VA_ARGS__); \
> + } while (0)
> +
> +#define LOGL(fmt, ...) do { if (unlikely \
> + (rmnet_data_log_level & RMNET_LOG_LVL_LOW))
> \
> + pr_notice("[RMNET:LOW] %s(): " fmt "\n",
> __func__, \
> + ##__VA_ARGS__); \
> + } while (0)
> +
> +/* Don't use pr_debug as it is compiled out of the kernel. We can be
> sure of
> + * minimal impact as LOGD is not enabled by default.
> + */
> +#define LOGD(fmt, ...) do { if (unlikely( \
> + (rmnet_data_log_level &
> RMNET_LOG_LVL_DBG) &&\
> + (rmnet_data_log_module_mask &
> rmnet_mod_mask))) \
> + pr_notice("[RMNET:DBG] %s(): " fmt "\n",
> __func__, \
> + ##__VA_ARGS__); \
> + } while (0)
> +
> +#endif /* _RMNET_DATA_PRIVATE_H_ */
> diff --git a/net/rmnet_data/rmnet_data_stats.c
> b/net/rmnet_data/rmnet_data_stats.c
> new file mode 100644
> index 0000000..4bf7a72
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_stats.c
> @@ -0,0 +1,86 @@
> +/* Copyright (c) 2014, 2016-2017 The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + *
> + * RMNET Data statistics
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/export.h>
> +#include <linux/skbuff.h>
> +#include <linux/spinlock.h>
> +#include <linux/netdevice.h>
> +#include "rmnet_data_private.h"
> +#include "rmnet_data_stats.h"
> +#include "rmnet_data_config.h"
> +#include "rmnet_map.h"
> +
> +enum rmnet_deagg_e {
> + RMNET_STATS_AGG_BUFF,
> + RMNET_STATS_AGG_PKT,
> + RMNET_STATS_AGG_MAX
> +};
> +
> +static DEFINE_SPINLOCK(rmnet_skb_free_lock);
> +unsigned long int skb_free[RMNET_STATS_SKBFREE_MAX];
> +module_param_array(skb_free, ulong, 0, 0444);
> +MODULE_PARM_DESC(skb_free, "SKBs dropped or freed");
> +
> +static DEFINE_SPINLOCK(rmnet_queue_xmit_lock);
> +unsigned long int queue_xmit[RMNET_STATS_QUEUE_XMIT_MAX * 2];
> +module_param_array(queue_xmit, ulong, 0, 0444);
> +MODULE_PARM_DESC(queue_xmit, "SKBs queued for transmit");
> +
> +static DEFINE_SPINLOCK(rmnet_deagg_count);
> +unsigned long int deagg_count[RMNET_STATS_AGG_MAX];
> +module_param_array(deagg_count, ulong, 0, 0444);
> +MODULE_PARM_DESC(deagg_count, "SKBs De-aggregated");
> +
> +void rmnet_kfree_skb(struct sk_buff *skb, unsigned int reason)
> +{
> + unsigned long flags;
> +
> + if (reason >= RMNET_STATS_SKBFREE_MAX)
> + reason = RMNET_STATS_SKBFREE_UNKNOWN;
> +
> + spin_lock_irqsave(&rmnet_skb_free_lock, flags);
> + skb_free[reason]++;
> + spin_unlock_irqrestore(&rmnet_skb_free_lock, flags);
> +
> + if (skb)
> + kfree_skb(skb);
> +}
> +
> +void rmnet_stats_queue_xmit(int rc, unsigned int reason)
> +{
> + unsigned long flags;
> +
> + if (rc != 0)
> + reason += RMNET_STATS_QUEUE_XMIT_MAX;
> + if (reason >= RMNET_STATS_QUEUE_XMIT_MAX * 2)
> + reason = RMNET_STATS_SKBFREE_UNKNOWN;
> +
> + spin_lock_irqsave(&rmnet_queue_xmit_lock, flags);
> + queue_xmit[reason]++;
> + spin_unlock_irqrestore(&rmnet_queue_xmit_lock, flags);
> +}
> +
> +void rmnet_stats_deagg_pkts(int aggcount)
> +{
> + unsigned long flags;
> +
> + spin_lock_irqsave(&rmnet_deagg_count, flags);
> + deagg_count[RMNET_STATS_AGG_BUFF]++;
> + deagg_count[RMNET_STATS_AGG_PKT] += aggcount;
> + spin_unlock_irqrestore(&rmnet_deagg_count, flags);
> +}
> diff --git a/net/rmnet_data/rmnet_data_stats.h
> b/net/rmnet_data/rmnet_data_stats.h
> new file mode 100644
> index 0000000..a6f73a2
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_stats.h
> @@ -0,0 +1,61 @@
> +/* Copyright (c) 2014, 2016-2017 The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + *
> + * RMNET Data statistics
> + *
> + */
> +
> +#ifndef _RMNET_DATA_STATS_H_
> +#define _RMNET_DATA_STATS_H_
> +
> +enum rmnet_skb_free_e {
> + RMNET_STATS_SKBFREE_UNKNOWN,
> + RMNET_STATS_SKBFREE_BRDG_NO_EGRESS,
> + RMNET_STATS_SKBFREE_DELIVER_NO_EP,
> + RMNET_STATS_SKBFREE_IPINGRESS_NO_EP,
> + RMNET_STATS_SKBFREE_MAPINGRESS_BAD_MUX,
> + RMNET_STATS_SKBFREE_MAPINGRESS_MUX_NO_EP,
> + RMNET_STATS_SKBFREE_MAPINGRESS_AGGBUF,
> + RMNET_STATS_SKBFREE_INGRESS_NOT_EXPECT_MAPD,
> + RMNET_STATS_SKBFREE_INGRESS_NOT_EXPECT_MAPC,
> + RMNET_STATS_SKBFREE_EGR_MAPFAIL,
> + RMNET_STATS_SKBFREE_VND_NO_EGRESS,
> + RMNET_STATS_SKBFREE_MAPC_BAD_MUX,
> + RMNET_STATS_SKBFREE_MAPC_MUX_NO_EP,
> + RMNET_STATS_SKBFREE_AGG_CPY_EXPAND,
> + RMNET_STATS_SKBFREE_AGG_INTO_BUFF,
> + RMNET_STATS_SKBFREE_DEAGG_MALFORMED,
> + RMNET_STATS_SKBFREE_DEAGG_CLONE_FAIL,
> + RMNET_STATS_SKBFREE_DEAGG_UNKNOWN_IP_TYPE,
> + RMNET_STATS_SKBFREE_DEAGG_DATA_LEN_0,
> + RMNET_STATS_SKBFREE_INGRESS_BAD_MAP_CKSUM,
> + RMNET_STATS_SKBFREE_MAPC_UNSUPPORTED,
> + RMNET_STATS_SKBFREE_MAX
> +};
> +
> +enum rmnet_queue_xmit_e {
> + RMNET_STATS_QUEUE_XMIT_UNKNOWN,
> + RMNET_STATS_QUEUE_XMIT_EGRESS,
> + RMNET_STATS_QUEUE_XMIT_AGG_FILL_BUFFER,
> + RMNET_STATS_QUEUE_XMIT_AGG_TIMEOUT,
> + RMNET_STATS_QUEUE_XMIT_AGG_CPY_EXP_FAIL,
> + RMNET_STATS_QUEUE_XMIT_AGG_SKIP,
> + RMNET_STATS_QUEUE_XMIT_MAX
> +};
> +
> +void rmnet_kfree_skb(struct sk_buff *skb, unsigned int reason);
> +void rmnet_stats_queue_xmit(int rc, unsigned int reason);
> +void rmnet_stats_deagg_pkts(int aggcount);
> +void rmnet_stats_agg_pkts(int aggcount);
> +void rmnet_stats_dl_checksum(unsigned int rc);
> +void rmnet_stats_ul_checksum(unsigned int rc);
> +#endif /* _RMNET_DATA_STATS_H_ */
> diff --git a/net/rmnet_data/rmnet_data_trace.h
> b/net/rmnet_data/rmnet_data_trace.h
> new file mode 100644
> index 0000000..264ff61
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_trace.h
> @@ -0,0 +1,198 @@
> +/* Copyright (c) 2014-2017, The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#undef TRACE_SYSTEM
> +#define TRACE_SYSTEM rmnet_data
> +#define TRACE_INCLUDE_FILE rmnet_data_trace
> +
> +#if !defined(_RMNET_DATA_TRACE_H_) ||
> defined(TRACE_HEADER_MULTI_READ)
> +#define _RMNET_DATA_TRACE_H_
> +
> +#include <linux/netdevice.h>
> +#include <linux/skbuff.h>
> +#include <linux/tracepoint.h>
> +
> +DECLARE_EVENT_CLASS
> + (rmnet_handler_template,
> +
> + TP_PROTO(struct sk_buff *skb),
> +
> + TP_ARGS(skb),
> +
> + TP_STRUCT__entry(
> + __field(void *, skbaddr)
> + __field(unsigned int, len)
> + __string(name, skb->dev->name)
> + ),
> +
> + TP_fast_assign(
> + __entry->skbaddr = skb;
> + __entry->len = skb->len;
> + __assign_str(name, skb->dev->name);
> + ),
> +
> + TP_printk("dev=%s skbaddr=%pK len=%u",
> + __get_str(name), __entry->skbaddr, __entry->len)
> +)
> +
> +DEFINE_EVENT
> + (rmnet_handler_template, rmnet_egress_handler,
> +
> + TP_PROTO(struct sk_buff *skb),
> +
> + TP_ARGS(skb)
> +);
> +
> +DEFINE_EVENT
> + (rmnet_handler_template, rmnet_ingress_handler,
> +
> + TP_PROTO(struct sk_buff *skb),
> +
> + TP_ARGS(skb)
> +);
> +
> +DEFINE_EVENT
> + (rmnet_handler_template, rmnet_vnd_start_xmit,
> +
> + TP_PROTO(struct sk_buff *skb),
> +
> + TP_ARGS(skb)
> +);
> +
> +DEFINE_EVENT
> + (rmnet_handler_template, __rmnet_deliver_skb,
> +
> + TP_PROTO(struct sk_buff *skb),
> +
> + TP_ARGS(skb)
> +);
> +
> +TRACE_EVENT
> + (rmnet_start_deaggregation,
> +
> + TP_PROTO(struct sk_buff *skb),
> +
> + TP_ARGS(skb),
> +
> + TP_STRUCT__entry(
> + __string(name, skb->dev->name)
> + ),
> +
> + TP_fast_assign(
> + __assign_str(name, skb->dev->name);
> + ),
> +
> + TP_printk("dev: %s, deaggregated first packet",
> __get_str(name))
> +)
> +
> +TRACE_EVENT
> + (rmnet_end_deaggregation,
> +
> + TP_PROTO(struct sk_buff *skb, int num_deagg_packets),
> +
> + TP_ARGS(skb, num_deagg_packets),
> +
> + TP_STRUCT__entry(
> + __string(name, skb->dev->name)
> + __field(int, num)
> + ),
> +
> + TP_fast_assign(
> + __assign_str(name, skb->dev->name);
> + __entry->num = num_deagg_packets;
> + ),
> +
> + TP_printk("dev: %s, deaggregate end count: %d",
> + __get_str(name), __entry->num)
> +)
> +
> +DECLARE_EVENT_CLASS
> + (rmnet_physdev_action_template,
> +
> + TP_PROTO(struct net_device *dev),
> +
> + TP_ARGS(dev),
> +
> + TP_STRUCT__entry(
> + __string(name, dev->name)
> + ),
> +
> + TP_fast_assign(
> + __assign_str(name, dev->name);
> + ),
> +
> + TP_printk("Physical dev=%s", __get_str(name))
> +)
> +
> +DEFINE_EVENT
> + (rmnet_physdev_action_template,
> rmnet_unregister_cb_unhandled,
> +
> + TP_PROTO(struct net_device *dev),
> +
> + TP_ARGS(dev)
> +);
> +
> +DEFINE_EVENT
> + (rmnet_physdev_action_template, rmnet_unregister_cb_entry,
> +
> + TP_PROTO(struct net_device *dev),
> +
> + TP_ARGS(dev)
> +);
> +
> +DEFINE_EVENT
> + (rmnet_physdev_action_template, rmnet_unregister_cb_exit,
> +
> + TP_PROTO(struct net_device *dev),
> +
> + TP_ARGS(dev)
> +);
> +
> +DEFINE_EVENT
> + (rmnet_physdev_action_template,
> rmnet_unregister_cb_clear_vnds,
> +
> + TP_PROTO(struct net_device *dev),
> +
> + TP_ARGS(dev)
> +);
> +
> +DEFINE_EVENT
> + (rmnet_physdev_action_template,
> rmnet_unregister_cb_clear_lepcs,
> +
> + TP_PROTO(struct net_device *dev),
> +
> + TP_ARGS(dev)
> +);
> +
> +DEFINE_EVENT
> + (rmnet_physdev_action_template, rmnet_associate,
> +
> + TP_PROTO(struct net_device *dev),
> +
> + TP_ARGS(dev)
> +);
> +
> +DEFINE_EVENT
> + (rmnet_physdev_action_template, rmnet_unassociate,
> +
> + TP_PROTO(struct net_device *dev),
> +
> + TP_ARGS(dev)
> +);
> +
> +#endif /* _RMNET_DATA_TRACE_H_ */
> +
> +/* This part must be outside protection */
> +#undef TRACE_INCLUDE_PATH
> +#define TRACE_INCLUDE_PATH .
> +#include <trace/define_trace.h>
> +
> diff --git a/net/rmnet_data/rmnet_data_vnd.c
> b/net/rmnet_data/rmnet_data_vnd.c
> new file mode 100644
> index 0000000..d48dc23
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_vnd.c
> @@ -0,0 +1,460 @@
> +/* Copyright (c) 2013-2017, The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + *
> + * RMNET Data virtual network driver
> + *
> + */
> +
> +#include <linux/types.h>
> +#include <linux/rmnet_data.h>
> +#include <linux/etherdevice.h>
> +#include <linux/if_arp.h>
> +#include <linux/spinlock.h>
> +#include <net/pkt_sched.h>
> +#include <linux/atomic.h>
> +#include "rmnet_data_config.h"
> +#include "rmnet_data_handlers.h"
> +#include "rmnet_data_private.h"
> +#include "rmnet_map.h"
> +#include "rmnet_data_vnd.h"
> +#include "rmnet_data_stats.h"
> +#include "rmnet_data_trace.h"
> +
> +RMNET_LOG_MODULE(RMNET_DATA_LOGMASK_VND);
> +
> +struct net_device *rmnet_devices[RMNET_DATA_MAX_VND];
> +
> +struct rmnet_vnd_private_s {
> + struct rmnet_logical_ep_conf_s local_ep;
> +};
> +
> +/* RX/TX Fixup */
> +
> +/* rmnet_vnd_rx_fixup() - Virtual Network Device receive fixup hook
> + * @skb: Socket buffer ("packet") to modify
> + * @dev: Virtual network device
> + *
> + * Additional VND specific packet processing for ingress packets
> + *
> + * Return:
> + * - RX_HANDLER_PASS if packet should continue to process in
> stack
> + * - RX_HANDLER_CONSUMED if packet should not be processed in
> stack
> + *
> + */
> +int rmnet_vnd_rx_fixup(struct sk_buff *skb, struct net_device *dev)
> +{
> + if (unlikely(!dev || !skb))
> + return RX_HANDLER_CONSUMED;
> +
> + dev->stats.rx_packets++;
> + dev->stats.rx_bytes += skb->len;
> +
> + return RX_HANDLER_PASS;
> +}
> +
> +/* rmnet_vnd_tx_fixup() - Virtual Network Device transmic fixup hook
> + * @skb: Socket buffer ("packet") to modify
> + * @dev: Virtual network device
> + *
> + * Additional VND specific packet processing for egress packets
> + *
> + * Return:
> + * - RX_HANDLER_PASS if packet should continue to be
> transmitted
> + * - RX_HANDLER_CONSUMED if packet should not be transmitted by
> stack
> + */
> +int rmnet_vnd_tx_fixup(struct sk_buff *skb, struct net_device *dev)
> +{
> + struct rmnet_vnd_private_s *dev_conf;
> +
> + dev_conf = (struct rmnet_vnd_private_s *)netdev_priv(dev);
> +
> + if (unlikely(!dev || !skb))
> + return RX_HANDLER_CONSUMED;
> +
> + dev->stats.tx_packets++;
> + dev->stats.tx_bytes += skb->len;
> +
> + return RX_HANDLER_PASS;
> +}
> +
> +/* Network Device Operations */
> +
> +/* rmnet_vnd_start_xmit() - Transmit NDO callback
> + * @skb: Socket buffer ("packet") being sent from network
> stack
> + * @dev: Virtual Network Device
> + *
> + * Standard network driver operations hook to transmit packets on
> virtual
> + * network device. Called by network stack. Packet is not
> transmitted directly
> + * from here; instead it is given to the rmnet egress handler.
> + *
> + * Return:
> + * - NETDEV_TX_OK under all cirumstances (cannot block/fail)
> + */
> +static netdev_tx_t rmnet_vnd_start_xmit(struct sk_buff *skb,
> + struct net_device *dev)
> +{
> + struct rmnet_vnd_private_s *dev_conf;
> +
> + trace_rmnet_vnd_start_xmit(skb);
> + dev_conf = (struct rmnet_vnd_private_s *)netdev_priv(dev);
> + if (dev_conf->local_ep.egress_dev) {
> + rmnet_egress_handler(skb, &dev_conf->local_ep);
> + } else {
> + dev->stats.tx_dropped++;
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_VND_NO_EGRESS);
> + }
> + return NETDEV_TX_OK;
> +}
> +
> +/* rmnet_vnd_change_mtu() - Change MTU NDO callback
> + * @dev: Virtual network device
> + * @new_mtu: New MTU value to set (in bytes)
> + *
> + * Standard network driver operations hook to set the MTU. Called by
> kernel to
> + * set the device MTU. Checks if desired MTU is less than zero or
> greater than
> + * RMNET_DATA_MAX_PACKET_SIZE;
> + *
> + * Return:
> + * - 0 if successful
> + * - -EINVAL if new_mtu is out of range
> + */
> +static int rmnet_vnd_change_mtu(struct net_device *dev, int new_mtu)
> +{
> + if (new_mtu < 0 || new_mtu > RMNET_DATA_MAX_PACKET_SIZE)
> + return -EINVAL;
> +
> + dev->mtu = new_mtu;
> + return 0;
> +}
> +
> +static const struct net_device_ops rmnet_data_vnd_ops = {
> + .ndo_init = 0,
> + .ndo_start_xmit = rmnet_vnd_start_xmit,
> + .ndo_change_mtu = rmnet_vnd_change_mtu,
> + .ndo_set_mac_address = 0,
> + .ndo_validate_addr = 0,
> +};
> +
> +/* rmnet_vnd_setup() - net_device initialization callback
> + * @dev: Virtual network device
> + *
> + * Called by kernel whenever a new rmnet_data<n> device is created.
> Sets MTU,
> + * flags, ARP type, needed headroom, etc...
> + */
> +static void rmnet_vnd_setup(struct net_device *dev)
> +{
> + struct rmnet_vnd_private_s *dev_conf;
> +
> + LOGM("Setting up device %s", dev->name);
> +
> + /* Clear out private data */
> + dev_conf = (struct rmnet_vnd_private_s *)netdev_priv(dev);
> + memset(dev_conf, 0, sizeof(struct rmnet_vnd_private_s));
> +
> + dev->netdev_ops = &rmnet_data_vnd_ops;
> + dev->mtu = RMNET_DATA_DFLT_PACKET_SIZE;
> + dev->needed_headroom = RMNET_DATA_NEEDED_HEADROOM;
> + random_ether_addr(dev->dev_addr);
> + dev->tx_queue_len = RMNET_DATA_TX_QUEUE_LEN;
> +
> + /* Raw IP mode */
> + dev->header_ops = 0; /* No header */
> + dev->type = ARPHRD_RAWIP;
> + dev->hard_header_len = 0;
> + dev->flags &= ~(IFF_BROADCAST | IFF_MULTICAST);
> +}
> +
> +/* Exposed API */
> +
> +/* rmnet_vnd_exit() - Shutdown cleanup hook
> + *
> + * Called by RmNet main on module unload. Cleans up data structures
> and
> + * unregisters/frees net_devices.
> + */
> +void rmnet_vnd_exit(void)
> +{
> + int i;
> +
> + for (i = 0; i < RMNET_DATA_MAX_VND; i++)
> + if (rmnet_devices[i]) {
> + unregister_netdev(rmnet_devices[i]);
> + free_netdev(rmnet_devices[i]);
> + }
> +}
> +
> +/* rmnet_vnd_init() - Init hook
> + *
> + * Called by RmNet main on module load. Initializes data structures
> + */
> +int rmnet_vnd_init(void)
> +{
> + memset(rmnet_devices, 0,
> + sizeof(struct net_device *) * RMNET_DATA_MAX_VND);
> + return 0;
> +}
> +
> +/* rmnet_vnd_create_dev() - Create a new virtual network device
> node.
> + * @id: Virtual device node id
> + * @new_device: Pointer to newly created device node
> + * @prefix: Device name prefix
> + *
> + * Allocates structures for new virtual network devices. Sets the
> name of the
> + * new device and registers it with the network stack. Device will
> appear in
> + * ifconfig list after this is called. If the prefix is null, then
> + * RMNET_DATA_DEV_NAME_STR will be assumed.
> + *
> + * Return:
> + * - 0 if successful
> + * - RMNET_CONFIG_BAD_ARGUMENTS if id is out of range or prefix
> is too long
> + * - RMNET_CONFIG_DEVICE_IN_USE if id already in use
> + * - RMNET_CONFIG_NOMEM if net_device allocation failed
> + * - RMNET_CONFIG_UNKNOWN_ERROR if register_netdevice() fails
> + */
> +int rmnet_vnd_create_dev(int id, struct net_device **new_device,
> + const char *prefix)
> +{
> + struct net_device *dev;
> + char dev_prefix[IFNAMSIZ];
> + int p, rc = 0;
> +
> + if (id < 0 || id >= RMNET_DATA_MAX_VND) {
> + *new_device = 0;
> + return RMNET_CONFIG_BAD_ARGUMENTS;
> + }
> +
> + if (rmnet_devices[id]) {
> + *new_device = 0;
> + return RMNET_CONFIG_DEVICE_IN_USE;
> + }
> +
> + if (!prefix)
> + p = scnprintf(dev_prefix, IFNAMSIZ, "%s%%d",
> + RMNET_DATA_DEV_NAME_STR);
> + else
> + p = scnprintf(dev_prefix, IFNAMSIZ, "%s%%d",
> prefix);
> + if (p >= (IFNAMSIZ - 1)) {
> + LOGE("Specified prefix longer than IFNAMSIZ");
> + return RMNET_CONFIG_BAD_ARGUMENTS;
> + }
> +
> + dev = alloc_netdev(sizeof(struct rmnet_vnd_private_s),
> + dev_prefix,
> + NET_NAME_ENUM,
> + rmnet_vnd_setup);
> + if (!dev) {
> + LOGE("Failed to to allocate netdev for id %d", id);
> + *new_device = 0;
> + return RMNET_CONFIG_NOMEM;
> + }
> +
> + rc = register_netdevice(dev);
> + if (rc != 0) {
> + LOGE("Failed to to register netdev [%s]", dev-
> >name);
> + free_netdev(dev);
> + *new_device = 0;
> + rc = RMNET_CONFIG_UNKNOWN_ERROR;
> + } else {
> + rmnet_devices[id] = dev;
> + *new_device = dev;
> + LOGM("Registered device %s", dev->name);
> + }
> +
> + return rc;
> +}
> +
> +/* rmnet_vnd_free_dev() - free a virtual network device node.
> + * @id: Virtual device node id
> + *
> + * Unregisters the virtual network device node and frees it.
> + * unregister_netdev locks the rtnl mutex, so the mutex must not be
> locked
> + * by the caller of the function. unregister_netdev enqueues the
> request to
> + * unregister the device into a TODO queue. The requests in the TODO
> queue
> + * are only done after rtnl mutex is unlocked, therefore free_netdev
> has to
> + * called after unlocking rtnl mutex.
> + *
> + * Return:
> + * - 0 if successful
> + * - RMNET_CONFIG_NO_SUCH_DEVICE if id is invalid or not in
> range
> + * - RMNET_CONFIG_DEVICE_IN_USE if device has logical ep that
> wasn't unset
> + */
> +int rmnet_vnd_free_dev(int id)
> +{
> + struct rmnet_logical_ep_conf_s *epconfig_l;
> + struct net_device *dev;
> +
> + rtnl_lock();
> + if ((id < 0) || (id >= RMNET_DATA_MAX_VND) ||
> !rmnet_devices[id]) {
> + rtnl_unlock();
> + LOGM("Invalid id [%d]", id);
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> + }
> +
> + epconfig_l = rmnet_vnd_get_le_config(rmnet_devices[id]);
> + if (epconfig_l && epconfig_l->refcount) {
> + rtnl_unlock();
> + return RMNET_CONFIG_DEVICE_IN_USE;
> + }
> +
> + dev = rmnet_devices[id];
> + rmnet_devices[id] = 0;
> + rtnl_unlock();
> +
> + if (dev) {
> + unregister_netdev(dev);
> + free_netdev(dev);
> + return 0;
> + } else {
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> + }
> +}
> +
> +/* rmnet_vnd_get_name() - Gets the string name of a VND based on ID
> + * @id: Virtual device node id
> + * @name: Buffer to store name of virtual device node
> + * @name_len: Length of name buffer
> + *
> + * Copies the name of the virtual device node into the users buffer.
> Will throw
> + * an error if the buffer is null, or too small to hold the device
> name.
> + *
> + * Return:
> + * - 0 if successful
> + * - -EINVAL if name is null
> + * - -EINVAL if id is invalid or not in range
> + * - -EINVAL if name is too small to hold things
> + */
> +int rmnet_vnd_get_name(int id, char *name, int name_len)
> +{
> + int p;
> +
> + if (!name) {
> + LOGM("%s", "Bad arguments; name buffer null");
> + return -EINVAL;
> + }
> +
> + if ((id < 0) || (id >= RMNET_DATA_MAX_VND) ||
> !rmnet_devices[id]) {
> + LOGM("Invalid id [%d]", id);
> + return -EINVAL;
> + }
> +
> + p = strlcpy(name, rmnet_devices[id]->name, name_len);
> + if (p >= name_len) {
> + LOGM("Buffer to small (%d) to fit device name",
> name_len);
> + return -EINVAL;
> + }
> + LOGL("Found mapping [%d]->\"%s\"", id, name);
> +
> + return 0;
> +}
> +
> +/* rmnet_vnd_is_vnd() - Determine if net_device is RmNet owned
> virtual devices
> + * @dev: Network device to test
> + *
> + * Searches through list of known RmNet virtual devices. This
> function is O(n)
> + * and should not be used in the data path.
> + *
> + * Return:
> + * - 0 if device is not RmNet virtual device
> + * - 1 if device is RmNet virtual device
> + */
> +int rmnet_vnd_is_vnd(struct net_device *dev)
> +{
> + /* This is not an efficient search, but, this will only be
> called in
> + * a configuration context, and the list is small.
> + */
> + int i;
> +
> + if (!dev)
> + return 0;
> +
> + for (i = 0; i < RMNET_DATA_MAX_VND; i++)
> + if (dev == rmnet_devices[i])
> + return i + 1;
> +
> + return 0;
> +}
> +
> +/* rmnet_vnd_get_le_config() - Get the logical endpoint
> configuration
> + * @dev: Virtual device node
> + *
> + * Gets the logical endpoint configuration for a RmNet virtual
> network device
> + * node. Caller should confirm that devices is a RmNet VND before
> calling.
> + *
> + * Return:
> + * - Pointer to logical endpoint configuration structure
> + * - 0 (null) if dev is null
> + */
> +struct rmnet_logical_ep_conf_s *rmnet_vnd_get_le_config(struct
> net_device *dev)
> +{
> + struct rmnet_vnd_private_s *dev_conf;
> +
> + if (!dev)
> + return 0;
> +
> + dev_conf = (struct rmnet_vnd_private_s *)netdev_priv(dev);
> + if (!dev_conf)
> + return 0;
> +
> + return &dev_conf->local_ep;
> +}
> +
> +/* rmnet_vnd_do_flow_control() - Process flow control request
> + * @dev: Virtual network device node to do lookup on
> + * @enable: boolean to enable/disable flow.
> + *
> + * Return:
> + * - 0 if successful
> + * - 1 if no mapping is found
> + * - 2 if dev is not RmNet virtual network device node
> + */
> +int rmnet_vnd_do_flow_control(struct net_device *dev, int enable)
> +{
> + struct rmnet_vnd_private_s *dev_conf;
> +
> + if (unlikely(!dev))
> + return 2;
> +
> + if (!rmnet_vnd_is_vnd(dev))
> + return 2;
> +
> + dev_conf = (struct rmnet_vnd_private_s *)netdev_priv(dev);
> +
> + if (unlikely(!dev_conf))
> + return 2;
> +
> + LOGD("Setting VND TX queue state to %d", enable);
> + /* Although we expect similar number of enable/disable
> + * commands, optimize for the disable. That is more
> + * latency sensitive than enable
> + */
> + if (unlikely(enable))
> + netif_wake_queue(dev);
> + else
> + netif_stop_queue(dev);
> +
> + return 0;
> +}
> +
> +/* rmnet_vnd_get_by_id() - Get VND by array index ID
> + * @id: Virtual network deice id [0:RMNET_DATA_MAX_VND]
> + *
> + * Return:
> + * - 0 if no device or ID out of range
> + * - otherwise return pointer to VND net_device struct
> + */
> +struct net_device *rmnet_vnd_get_by_id(int id)
> +{
> + if (id < 0 || id >= RMNET_DATA_MAX_VND) {
> + pr_err("Bug; VND ID out of bounds");
> + return 0;
> + }
> + return rmnet_devices[id];
> +}
> diff --git a/net/rmnet_data/rmnet_data_vnd.h
> b/net/rmnet_data/rmnet_data_vnd.h
> new file mode 100644
> index 0000000..2903ffe
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_vnd.h
> @@ -0,0 +1,34 @@
> +/* Copyright (c) 2013-2017, The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * RMNET Data Virtual Network Device APIs
> + *
> + */
> +
> +#include <linux/types.h>
> +
> +#ifndef _RMNET_DATA_VND_H_
> +#define _RMNET_DATA_VND_H_
> +
> +int rmnet_vnd_do_flow_control(struct net_device *dev, int enable);
> +struct rmnet_logical_ep_conf_s *rmnet_vnd_get_le_config(struct
> net_device *dev);
> +int rmnet_vnd_get_name(int id, char *name, int name_len);
> +int rmnet_vnd_create_dev(int id, struct net_device **new_device,
> + const char *prefix);
> +int rmnet_vnd_free_dev(int id);
> +int rmnet_vnd_rx_fixup(struct sk_buff *skb, struct net_device *dev);
> +int rmnet_vnd_tx_fixup(struct sk_buff *skb, struct net_device *dev);
> +int rmnet_vnd_is_vnd(struct net_device *dev);
> +int rmnet_vnd_init(void);
> +void rmnet_vnd_exit(void);
> +struct net_device *rmnet_vnd_get_by_id(int id);
> +
> +#endif /* _RMNET_DATA_VND_H_ */
> diff --git a/net/rmnet_data/rmnet_map.h b/net/rmnet_data/rmnet_map.h
> new file mode 100644
> index 0000000..7d533aa
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_map.h
> @@ -0,0 +1,100 @@
> +/* Copyright (c) 2013-2017, The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/types.h>
> +#include <linux/spinlock.h>
> +
> +#ifndef _RMNET_MAP_H_
> +#define _RMNET_MAP_H_
> +
> +struct rmnet_map_control_command_s {
> + u8 command_name;
> + u8 cmd_type:2;
> + u8 reserved:6;
> + u16 reserved2;
> + u32 transaction_id;
> + union {
> + u8 data[65528];
> + struct {
> + u16 ip_family:2;
> + u16 reserved:14;
> + u16 flow_control_seq_num;
> + u32 qos_id;
> + } flow_control;
> + };
> +} __aligned(1);
> +
> +enum rmnet_map_results_e {
> + RMNET_MAP_SUCCESS,
> + RMNET_MAP_CONSUMED,
> + RMNET_MAP_GENERAL_FAILURE,
> + RMNET_MAP_NOT_ENABLED,
> + RMNET_MAP_FAILED_AGGREGATION,
> + RMNET_MAP_FAILED_MUX
> +};
> +
> +enum rmnet_map_mux_errors_e {
> + RMNET_MAP_MUX_SUCCESS,
> + RMNET_MAP_MUX_INVALID_MUX_ID,
> + RMNET_MAP_MUX_INVALID_PAD_LENGTH,
> + RMNET_MAP_MUX_INVALID_PKT_LENGTH,
> + /* This should always be the last element */
> + RMNET_MAP_MUX_ENUM_LENGTH
> +};
> +
> +enum rmnet_map_commands_e {
> + RMNET_MAP_COMMAND_NONE,
> + RMNET_MAP_COMMAND_FLOW_DISABLE,
> + RMNET_MAP_COMMAND_FLOW_ENABLE,
> + /* These should always be the last 2 elements */
> + RMNET_MAP_COMMAND_UNKNOWN,
> + RMNET_MAP_COMMAND_ENUM_LENGTH
> +};
> +
> +struct rmnet_map_header_s {
> + u8 pad_len:6;
> + u8 reserved_bit:1;
> + u8 cd_bit:1;
> + u8 mux_id;
> + u16 pkt_len;
> +} __aligned(1);
> +
> +#define RMNET_MAP_GET_MUX_ID(Y) (((struct rmnet_map_header_s *) \
> + (Y)->data)->mux_id)
> +#define RMNET_MAP_GET_CD_BIT(Y) (((struct rmnet_map_header_s *) \
> + (Y)->data)->cd_bit)
> +#define RMNET_MAP_GET_PAD(Y) (((struct rmnet_map_header_s *) \
> + (Y)->data)->pad_len)
> +#define RMNET_MAP_GET_CMD_START(Y) ((struct
> rmnet_map_control_command_s *) \
> + ((Y)->data + \
> + sizeof(struct
> rmnet_map_header_s)))
> +#define RMNET_MAP_GET_LENGTH(Y) (ntohs(((struct rmnet_map_header_s
> *) \
> + (Y)->data)->pkt_len))
> +
> +#define RMNET_MAP_COMMAND_REQUEST 0
> +#define RMNET_MAP_COMMAND_ACK 1
> +#define RMNET_MAP_COMMAND_UNSUPPORTED 2
> +#define RMNET_MAP_COMMAND_INVALID 3
> +
> +#define RMNET_MAP_NO_PAD_BYTES 0
> +#define RMNET_MAP_ADD_PAD_BYTES 1
> +
> +u8 rmnet_map_demultiplex(struct sk_buff *skb);
> +struct sk_buff *rmnet_map_deaggregate(struct sk_buff *skb,
> + struct rmnet_phys_ep_conf_s
> *config);
> +
> +struct rmnet_map_header_s *rmnet_map_add_map_header(struct sk_buff
> *skb,
> + int hdrlen, int
> pad);
> +rx_handler_result_t rmnet_map_command(struct sk_buff *skb,
> + struct rmnet_phys_ep_conf_s
> *config);
> +
> +#endif /* _RMNET_MAP_H_ */
> diff --git a/net/rmnet_data/rmnet_map_command.c
> b/net/rmnet_data/rmnet_map_command.c
> new file mode 100644
> index 0000000..acb0b11
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_map_command.c
> @@ -0,0 +1,180 @@
> +/* Copyright (c) 2013-2017, The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/skbuff.h>
> +#include <linux/netdevice.h>
> +#include <linux/rmnet_data.h>
> +#include <net/pkt_sched.h>
> +#include "rmnet_data_config.h"
> +#include "rmnet_map.h"
> +#include "rmnet_data_private.h"
> +#include "rmnet_data_vnd.h"
> +#include "rmnet_data_stats.h"
> +
> +RMNET_LOG_MODULE(RMNET_DATA_LOGMASK_MAPC);
> +
> +unsigned long int
> rmnet_map_command_stats[RMNET_MAP_COMMAND_ENUM_LENGTH];
> +module_param_array(rmnet_map_command_stats, ulong, 0, 0444);
> +MODULE_PARM_DESC(rmnet_map_command_stats, "MAP command statistics");
> +
> +/* rmnet_map_do_flow_control() - Process MAP flow control command
> + * @skb: Socket buffer containing the MAP flow control message
> + * @config: Physical end-point configuration of ingress device
> + * @enable: boolean for enable/disable
> + *
> + * Process in-band MAP flow control messages. Assumes mux ID is
> mapped to a
> + * RmNet Data vitrual network device.
> + *
> + * Return:
> + * - RMNET_MAP_COMMAND_UNSUPPORTED on any error
> + * - RMNET_MAP_COMMAND_ACK on success
> + */
> +static u8 rmnet_map_do_flow_control(struct sk_buff *skb,
> + struct rmnet_phys_ep_conf_s
> *config,
> + int enable)
> +{
> + struct rmnet_map_control_command_s *cmd;
> + struct net_device *vnd;
> + struct rmnet_logical_ep_conf_s *ep;
> + u8 mux_id;
> + u16 ip_family;
> + u16 fc_seq;
> + u32 qos_id;
> + int r;
> +
> + if (unlikely(!skb || !config))
> + return RX_HANDLER_CONSUMED;
> +
> + mux_id = RMNET_MAP_GET_MUX_ID(skb);
> + cmd = RMNET_MAP_GET_CMD_START(skb);
> +
> + if (mux_id >= RMNET_DATA_MAX_LOGICAL_EP) {
> + LOGD("Got packet on %s with bad mux id %d",
> + skb->dev->name, mux_id);
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_MAPC_BAD_MUX);
> + return RX_HANDLER_CONSUMED;
> + }
> +
> + ep = &config->muxed_ep[mux_id];
> +
> + if (!ep->refcount) {
> + LOGD("Packet on %s:%d; has no logical endpoint
> config",
> + skb->dev->name, mux_id);
> +
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_MAPC_MUX_NO_EP);
> + return RX_HANDLER_CONSUMED;
> + }
> +
> + vnd = ep->egress_dev;
> +
> + ip_family = cmd->flow_control.ip_family;
> + fc_seq = ntohs(cmd->flow_control.flow_control_seq_num);
> + qos_id = ntohl(cmd->flow_control.qos_id);
> +
> + /* Ignore the ip family and pass the sequence number for
> both v4 and v6
> + * sequence. User space does not support creating dedicated
> flows for
> + * the 2 protocols
> + */
> + r = rmnet_vnd_do_flow_control(vnd, enable);
> + LOGD("dev:%s, qos_id:0x%08X, ip_family:%hd, fc_seq %hd,
> en:%d",
> + skb->dev->name, qos_id, ip_family & 3, fc_seq, enable);
> +
> + if (r) {
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_MAPC_UNSUPPORTED);
> + return RMNET_MAP_COMMAND_UNSUPPORTED;
> + } else {
> + return RMNET_MAP_COMMAND_ACK;
> + }
> +}
> +
> +/* rmnet_map_send_ack() - Send N/ACK message for MAP commands
> + * @skb: Socket buffer containing the MAP command message
> + * @type: N/ACK message selector
> + * @config: Physical end-point configuration of ingress device
> + *
> + * skb is modified to contain the message type selector. The message
> is then
> + * transmitted on skb->dev. Note that this function grabs global Tx
> lock on
> + * skb->dev for latency reasons.
> + *
> + * Return:
> + * - void
> + */
> +static void rmnet_map_send_ack(struct sk_buff *skb,
> + unsigned char type,
> + struct rmnet_phys_ep_conf_s *config)
> +{
> + struct rmnet_map_control_command_s *cmd;
> + int xmit_status;
> +
> + if (unlikely(!skb))
> + return;
> +
> + skb->protocol = htons(ETH_P_MAP);
> +
> + cmd = RMNET_MAP_GET_CMD_START(skb);
> + cmd->cmd_type = type & 0x03;
> +
> + netif_tx_lock(skb->dev);
> + xmit_status = skb->dev->netdev_ops->ndo_start_xmit(skb, skb-
> >dev);
> + netif_tx_unlock(skb->dev);
> +
> + LOGD("MAP command ACK=%hhu sent with rc: %d", type & 0x03,
> xmit_status);
> +}
> +
> +/* rmnet_map_command() - Entry point for handling MAP commands
> + * @skb: Socket buffer containing the MAP command message
> + * @config: Physical end-point configuration of ingress device
> + *
> + * Process MAP command frame and send N/ACK message as appropriate.
> Message cmd
> + * name is decoded here and appropriate handler is called.
> + *
> + * Return:
> + * - RX_HANDLER_CONSUMED. Command frames are always consumed.
> + */
> +rx_handler_result_t rmnet_map_command(struct sk_buff *skb,
> + struct rmnet_phys_ep_conf_s
> *config)
> +{
> + struct rmnet_map_control_command_s *cmd;
> + unsigned char command_name;
> + unsigned char rc = 0;
> +
> + if (unlikely(!skb))
> + return RX_HANDLER_CONSUMED;
> +
> + cmd = RMNET_MAP_GET_CMD_START(skb);
> + command_name = cmd->command_name;
> +
> + if (command_name < RMNET_MAP_COMMAND_ENUM_LENGTH)
> + rmnet_map_command_stats[command_name]++;
> +
> + switch (command_name) {
> + case RMNET_MAP_COMMAND_FLOW_ENABLE:
> + rc = rmnet_map_do_flow_control(skb, config, 1);
> + break;
> +
> + case RMNET_MAP_COMMAND_FLOW_DISABLE:
> + rc = rmnet_map_do_flow_control(skb, config, 0);
> + break;
> +
> + default:
> + rmnet_map_command_stats[RMNET_MAP_COMMAND_UNKNOWN]++
> ;
> + LOGM("Uknown MAP command: %d", command_name);
> + rc = RMNET_MAP_COMMAND_UNSUPPORTED;
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_MAPC_UNSUPPORTED);
> + break;
> + }
> + if (rc == RMNET_MAP_COMMAND_ACK)
> + rmnet_map_send_ack(skb, rc, config);
> + return RX_HANDLER_CONSUMED;
> +}
> diff --git a/net/rmnet_data/rmnet_map_data.c
> b/net/rmnet_data/rmnet_map_data.c
> new file mode 100644
> index 0000000..33bde72
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_map_data.c
> @@ -0,0 +1,148 @@
> +/* Copyright (c) 2013-2017, The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * RMNET Data MAP protocol
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/skbuff.h>
> +#include <linux/netdevice.h>
> +#include <linux/rmnet_data.h>
> +#include <linux/spinlock.h>
> +#include <linux/workqueue.h>
> +#include <linux/time.h>
> +#include <linux/ip.h>
> +#include <linux/ipv6.h>
> +#include <linux/udp.h>
> +#include <linux/tcp.h>
> +#include <linux/in.h>
> +#include <net/ip.h>
> +#include <net/checksum.h>
> +#include <net/ip6_checksum.h>
> +#include "rmnet_data_config.h"
> +#include "rmnet_map.h"
> +#include "rmnet_data_private.h"
> +#include "rmnet_data_stats.h"
> +#include "rmnet_data_trace.h"
> +
> +RMNET_LOG_MODULE(RMNET_DATA_LOGMASK_MAPD);
> +
> +#define RMNET_MAP_DEAGGR_SPACING 64
> +#define RMNET_MAP_DEAGGR_HEADROOM (RMNET_MAP_DEAGGR_SPACING / 2)
> +
> +/* rmnet_map_add_map_header() - Adds MAP header to front of skb-
> >data
> + * @skb: Socket buffer ("packet") to modify
> + * @hdrlen: Number of bytes of header data which should not be
> included in
> + * MAP length field
> + * @pad: Specify if padding the MAP packet to make it 4 byte
> aligned is
> + * necessary
> + *
> + * Padding is calculated and set appropriately in MAP header. Mux ID
> is
> + * initialized to 0.
> + *
> + * Return:
> + * - Pointer to MAP structure
> + * - 0 (null) if insufficient headroom
> + * - 0 (null) if insufficient tailroom for padding bytes
> + *
> + * todo: Parameterize skb alignment
> + */
> +struct rmnet_map_header_s *rmnet_map_add_map_header(struct sk_buff
> *skb,
> + int hdrlen, int
> pad)
> +{
> + u32 padding, map_datalen;
> + u8 *padbytes;
> + struct rmnet_map_header_s *map_header;
> +
> + if (skb_headroom(skb) < sizeof(struct rmnet_map_header_s))
> + return 0;
> +
> + map_datalen = skb->len - hdrlen;
> + map_header = (struct rmnet_map_header_s *)
> + skb_push(skb, sizeof(struct
> rmnet_map_header_s));
> + memset(map_header, 0, sizeof(struct rmnet_map_header_s));
> +
> + if (pad == RMNET_MAP_NO_PAD_BYTES) {
> + map_header->pkt_len = htons(map_datalen);
> + return map_header;
> + }
> +
> + padding = ALIGN(map_datalen, 4) - map_datalen;
> +
> + if (padding == 0)
> + goto done;
> +
> + if (skb_tailroom(skb) < padding)
> + return 0;
> +
> + padbytes = (u8 *)skb_put(skb, padding);
> + LOGD("pad: %d", padding);
> + memset(padbytes, 0, padding);
> +
> +done:
> + map_header->pkt_len = htons(map_datalen + padding);
> + map_header->pad_len = padding & 0x3F;
> +
> + return map_header;
> +}
> +
> +/* rmnet_map_deaggregate() - Deaggregates a single packet
> + * @skb: Source socket buffer containing multiple MAP frames
> + * @config: Physical endpoint configuration of the ingress
> device
> + *
> + * A whole new buffer is allocated for each portion of an aggregated
> frame.
> + * Caller should keep calling deaggregate() on the source skb until
> 0 is
> + * returned, indicating that there are no more packets to
> deaggregate. Caller
> + * is responsible for freeing the original skb.
> + *
> + * Return:
> + * - Pointer to new skb
> + * - 0 (null) if no more aggregated packets
> + */
> +struct sk_buff *rmnet_map_deaggregate(struct sk_buff *skb,
> + struct rmnet_phys_ep_conf_s
> *config)
> +{
> + struct sk_buff *skbn;
> + struct rmnet_map_header_s *maph;
> + u32 packet_len;
> +
> + if (skb->len == 0)
> + return 0;
> +
> + maph = (struct rmnet_map_header_s *)skb->data;
> + packet_len = ntohs(maph->pkt_len) + sizeof(struct
> rmnet_map_header_s);
> +
> + if ((((int)skb->len) - ((int)packet_len)) < 0) {
> + LOGM("%s", "Got malformed packet. Dropping");
> + return 0;
> + }
> +
> + skbn = alloc_skb(packet_len + RMNET_MAP_DEAGGR_SPACING,
> GFP_ATOMIC);
> + if (!skbn)
> + return 0;
> +
> + skbn->dev = skb->dev;
> + skb_reserve(skbn, RMNET_MAP_DEAGGR_HEADROOM);
> + skb_put(skbn, packet_len);
> + memcpy(skbn->data, skb->data, packet_len);
> + skb_pull(skb, packet_len);
> +
> + /* Some hardware can send us empty frames. Catch them */
> + if (ntohs(maph->pkt_len) == 0) {
> + LOGD("Dropping empty MAP frame");
> + rmnet_kfree_skb(skbn,
> RMNET_STATS_SKBFREE_DEAGG_DATA_LEN_0);
> + return 0;
> + }
> +
> + return skbn;
> +}
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH net-next 1/1 v2] net: rmnet_data: Initial implementation
2017-03-13 7:43 ` [PATCH net-next 1/1 v2] net: rmnet_data: Initial implementation Subash Abhinov Kasiviswanathan
` (2 preceding siblings ...)
2017-03-24 22:15 ` Dan Williams
@ 2017-03-24 22:21 ` Dan Williams
2017-03-25 0:49 ` Subash Abhinov Kasiviswanathan
3 siblings, 1 reply; 12+ messages in thread
From: Dan Williams @ 2017-03-24 22:21 UTC (permalink / raw)
To: Subash Abhinov Kasiviswanathan, netdev, davem, fengguang.wu
On Mon, 2017-03-13 at 01:43 -0600, Subash Abhinov Kasiviswanathan
wrote:
> RmNet Data driver provides a transport agnostic MAP (multiplexing and
> aggregation protocol) support in embedded and bridge modes. Module
> provides virtual network devices which can be attached to any IP-mode
> physical device. This will be used to provide all MAP functionality
> on future hardware in a single consistent location.
(re-sending from an address that's actually subscribed to netdev@...)
The first thing that jumps out at me is "why isn't this using
rtnl_link_ops?"
To me (and perhaps I'm completely wrong) the structure here is a lot
like VLAN interfaces. You have a base device (whether that's a netdev
or not) and you essentially "ip link add link cdc-wdm0 name rmnet0 type
rmnet id 5". Does the aggregation happen only on the downlink (eg,
device -> host) or can the host send aggregated packets too?
Using rtnl_link_ops would get rid of ASSOC_NET_DEV, UNASSOC_NET_DEV,
NEW_VND, NEW_VND_WITH_PREFIX, and FREE_VND. GET_NET_DEV_ASSOC goes
away becuase you use normal 'kobject' associations and you can derive
the rmnet parent through sysfs links. rmnet_nl_msg_s goes away,
because you can use nla_policy.
Just a thought; there seems to be a ton of overlap with rtnl_link_ops
in the control plane here.
Any thoughts on how this plays with net namespaces?
Also, I'm not sure if it make sense to provide first class tracepoints
for a specific driver, as it's not clear if they are userspace API or
not and thus may need to be kept stable. Or are perf probes enough
instead?
What's RMNET_EPMODE_BRIDGE and how is it used?
Dan
> Signed-off-by: Subash Abhinov Kasiviswanathan
> <subashab@codeaurora.org>
> ---
> Documentation/networking/rmnet_data.txt | 82 +++
> include/uapi/linux/Kbuild | 1 +
> include/uapi/linux/if_arp.h | 1 +
> include/uapi/linux/if_ether.h | 4 +-
> include/uapi/linux/rmnet_data.h | 214 ++++++
> net/Kconfig | 1 +
> net/Makefile | 1 +
> net/rmnet_data/Kconfig | 21 +
> net/rmnet_data/Makefile | 14 +
> net/rmnet_data/rmnet_data_config.c | 1168
> +++++++++++++++++++++++++++++++
> net/rmnet_data/rmnet_data_config.h | 107 +++
> net/rmnet_data/rmnet_data_handlers.c | 556 +++++++++++++++
> net/rmnet_data/rmnet_data_handlers.h | 24 +
> net/rmnet_data/rmnet_data_main.c | 60 ++
> net/rmnet_data/rmnet_data_private.h | 76 ++
> net/rmnet_data/rmnet_data_stats.c | 86 +++
> net/rmnet_data/rmnet_data_stats.h | 61 ++
> net/rmnet_data/rmnet_data_trace.h | 198 ++++++
> net/rmnet_data/rmnet_data_vnd.c | 460 ++++++++++++
> net/rmnet_data/rmnet_data_vnd.h | 34 +
> net/rmnet_data/rmnet_map.h | 100 +++
> net/rmnet_data/rmnet_map_command.c | 180 +++++
> net/rmnet_data/rmnet_map_data.c | 148 ++++
> 23 files changed, 3596 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/networking/rmnet_data.txt
> create mode 100644 include/uapi/linux/rmnet_data.h
> create mode 100644 net/rmnet_data/Kconfig
> create mode 100644 net/rmnet_data/Makefile
> create mode 100644 net/rmnet_data/rmnet_data_config.c
> create mode 100644 net/rmnet_data/rmnet_data_config.h
> create mode 100644 net/rmnet_data/rmnet_data_handlers.c
> create mode 100644 net/rmnet_data/rmnet_data_handlers.h
> create mode 100644 net/rmnet_data/rmnet_data_main.c
> create mode 100644 net/rmnet_data/rmnet_data_private.h
> create mode 100644 net/rmnet_data/rmnet_data_stats.c
> create mode 100644 net/rmnet_data/rmnet_data_stats.h
> create mode 100644 net/rmnet_data/rmnet_data_trace.h
> create mode 100644 net/rmnet_data/rmnet_data_vnd.c
> create mode 100644 net/rmnet_data/rmnet_data_vnd.h
> create mode 100644 net/rmnet_data/rmnet_map.h
> create mode 100644 net/rmnet_data/rmnet_map_command.c
> create mode 100644 net/rmnet_data/rmnet_map_data.c
>
> diff --git a/Documentation/networking/rmnet_data.txt
> b/Documentation/networking/rmnet_data.txt
> new file mode 100644
> index 0000000..ff6cce8
> --- /dev/null
> +++ b/Documentation/networking/rmnet_data.txt
> @@ -0,0 +1,82 @@
> +1. Introduction
> +
> +rmnet_data driver is used for supporting the Multiplexing and
> aggregation
> +Protocol (MAP). This protocol is used by all recent chipsets using
> Qualcomm
> +Technologies, Inc. modems.
> +
> +This driver can be used to register onto any physical network device
> in
> +IP mode. Physical transports include USB, HSIC, PCIe and IP
> accelerator.
> +
> +Multiplexing allows for creation of logical netdevices (rmnet_data
> devices) to
> +handle multiple private data networks (PDN) like a default internet,
> tethering,
> +multimedia messaging service (MMS) or IP media subsystem (IMS).
> Hardware sends
> +packets with MAP headers to rmnet_data. Based on the multiplexer id,
> rmnet_data
> +routes to the appropriate PDN after removing the MAP header.
> +
> +Aggregation is required to achieve high data rates. This involves
> hardware
> +sending aggregated bunch of MAP frames. rmnet_data driver will de-
> aggregate
> +these MAP frames and send them to appropriate PDN's.
> +
> +2. Packet format
> +
> +a. MAP packet (data / control)
> +
> +MAP header has the same endianness of the IP packet.
> +
> +Packet format -
> +
> +Bit 0 1 2-7 8 -
> 15 16 - 31
> +Function Command / Data Reserved Pad Multiplexer
> ID Payload length
> +Bit 32 - x
> +Function Raw Bytes
> +
> +Command (1)/ Data (0) bit value is to indicate if the packet is a
> MAP command
> +or data packet. Control packet is used for transport level flow
> control. Data
> +packets are standard IP packets.
> +
> +Reserved bits are usually zeroed out and to be ignored by receiver.
> +
> +Padding is number of bytes to be added for 4 byte alignment if
> required by
> +hardware.
> +
> +Multiplexer ID is to indicate the PDN on which data has to be sent.
> +
> +Payload length includes the padding length but does not include MAP
> header
> +length.
> +
> +b. MAP packet (command specific)
> +
> +Bit 0 1 2-7 8 -
> 15 16 - 31
> +Function Command Reserved Pad Multiplexer
> ID Payload length
> +Bit 32 - 39 40 - 45 46 - 47 48 - 63
> +Function Command name Reserved Command Type Reserved
> +Bit 64 - 95
> +Function Transaction ID
> +Bit 96 - 127
> +Function Command data
> +
> +Command 1 indicates disabling flow while 2 is enabling flow
> +
> +Command types -
> +0 for MAP command request
> +1 is to acknowledge the receipt of a command
> +2 is for unsupported commands
> +3 is for error during processing of commands
> +
> +c. Aggregation
> +
> +Aggregation is multiple MAP packets (can be data or command)
> delivered to
> +rmnet_data in a single linear skb. rmnet_data will process the
> individual
> +packets and either ACK the MAP command or deliver the IP packet to
> the
> +network stack as needed
> +
> +MAP header|IP Packet|Optional padding|MAP header|IP Packet|Optional
> padding....
> +MAP header|IP Packet|Optional padding|MAP header|Command
> Packet|Optional pad...
> +
> +3. Userspace configuration
> +
> +rmnet_data userspace configuration is done through netlink library
> librmnetctl
> +and command line utility rmnetcli. Utility is hosted in codeaurora
> forum git
> +
> +https://source.codeaurora.org/quic/la/platform/vendor/qcom-opensourc
> e/\
> +dataservices/tree/rmnetctl
> diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
> index dd9820b..c488c87 100644
> --- a/include/uapi/linux/Kbuild
> +++ b/include/uapi/linux/Kbuild
> @@ -370,6 +370,7 @@ header-y += resource.h
> header-y += rfkill.h
> header-y += rio_cm_cdev.h
> header-y += rio_mport_cdev.h
> +header-y += rmnet_data.h
> header-y += romfs_fs.h
> header-y += rose.h
> header-y += route.h
> diff --git a/include/uapi/linux/if_arp.h
> b/include/uapi/linux/if_arp.h
> index 4d024d7..e762447 100644
> --- a/include/uapi/linux/if_arp.h
> +++ b/include/uapi/linux/if_arp.h
> @@ -59,6 +59,7 @@
> #define ARPHRD_LAPB 516 /* LAPB
> */
> #define ARPHRD_DDCMP 517 /* Digital's DDCMP
> protocol */
> #define ARPHRD_RAWHDLC 518 /* Raw HDLC
> */
> +#define ARPHRD_RAWIP 530 /* Raw IP
> */
>
> #define ARPHRD_TUNNEL 768 /* IPIP tunnel
> */
> #define ARPHRD_TUNNEL6 769 /* IP6IP6
> tunnel */
> diff --git a/include/uapi/linux/if_ether.h
> b/include/uapi/linux/if_ether.h
> index 5bc9bfd..70520da 100644
> --- a/include/uapi/linux/if_ether.h
> +++ b/include/uapi/linux/if_ether.h
> @@ -104,7 +104,9 @@
> #define ETH_P_QINQ3 0x9300 /* deprecated QinQ
> VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
> #define ETH_P_EDSA 0xDADA /* Ethertype DSA [
> NOT AN OFFICIALLY REGISTERED ID ] */
> #define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT
> AN OFFICIALLY REGISTERED ID ] */
> -
> +#define ETH_P_MAP 0xDA1A /* Multiplexing and
> Aggregation Protocol
> + * NOT AN OFFICIALLY
> REGISTERED ID ]
> + */
> #define ETH_P_802_3_MIN 0x0600 /* If the value
> in the ethernet type is less than this value
> * then the frame is
> Ethernet II. Else it is 802.3 */
>
> diff --git a/include/uapi/linux/rmnet_data.h
> b/include/uapi/linux/rmnet_data.h
> new file mode 100644
> index 0000000..04b6646
> --- /dev/null
> +++ b/include/uapi/linux/rmnet_data.h
> @@ -0,0 +1,214 @@
> +/* Copyright (c) 2013-2017, The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * RMNET Data configuration specification
> + */
> +
> +#ifndef _RMNET_DATA_H_
> +#define _RMNET_DATA_H_
> +
> +/* Netlink API */
> +#define RMNET_NETLINK_PROTO 31
> +#define RMNET_MAX_STR_LEN 16
> +#define RMNET_NL_DATA_MAX_LEN 64
> +
> +#define RMNET_NETLINK_MSG_COMMAND 0
> +#define RMNET_NETLINK_MSG_RETURNCODE 1
> +#define RMNET_NETLINK_MSG_RETURNDATA 2
> +
> +/* Constants */
> +#define RMNET_EGRESS_FORMAT__RESERVED__ (1<<0)
> +#define RMNET_EGRESS_FORMAT_MAP (1<<1)
> +#define RMNET_EGRESS_FORMAT_AGGREGATION (1<<2)
> +#define RMNET_EGRESS_FORMAT_MUXING (1<<3)
> +#define RMNET_EGRESS_FORMAT_MAP_CKSUMV3 (1<<4)
> +#define RMNET_EGRESS_FORMAT_MAP_CKSUMV4 (1<<5)
> +
> +#define RMNET_INGRESS_FIX_ETHERNET (1<<0)
> +#define RMNET_INGRESS_FORMAT_MAP (1<<1)
> +#define RMNET_INGRESS_FORMAT_DEAGGREGATION (1<<2)
> +#define RMNET_INGRESS_FORMAT_DEMUXING (1<<3)
> +#define RMNET_INGRESS_FORMAT_MAP_COMMANDS (1<<4)
> +#define RMNET_INGRESS_FORMAT_MAP_CKSUMV3 (1<<5)
> +#define RMNET_INGRESS_FORMAT_MAP_CKSUMV4 (1<<6)
> +
> +struct rmnet_nl_msg_s {
> + __le16 reserved;
> + __le16 message_type;
> + __le16 reserved2:14;
> + __le16 crd:2;
> + union {
> + __le16 arg_length;
> + __le16 return_code;
> + };
> + union {
> + __u8 data[RMNET_NL_DATA_MAX_LEN];
> + struct {
> + __u8 dev[RMNET_MAX_STR_LEN];
> + __le32 flags;
> + __le16 agg_size;
> + __le16 agg_count;
> + __u8 tail_spacing;
> + } data_format;
> + struct {
> + __u8 dev[RMNET_MAX_STR_LEN];
> + __le32 ep_id;
> + __u8 operating_mode;
> + __u8 next_dev[RMNET_MAX_STR_LEN];
> + } local_ep_config;
> + struct {
> + __le32 id;
> + __u8 vnd_name[RMNET_MAX_STR_LEN];
> + } vnd;
> + };
> +};
> +
> +enum rmnet_netlink_message_types_e {
> + /* RMNET_NETLINK_ASSOCIATE_NETWORK_DEVICE - Register RMNET
> data driver
> + * on a particular
> device.
> + * Args: char[] dev_name: Null terminated ASCII string, max
> length: 15
> + * Returns: status code
> + */
> + RMNET_NETLINK_ASSOCIATE_NETWORK_DEVICE,
> +
> + /* RMNET_NETLINK_UNASSOCIATE_NETWORK_DEVICE - Unregister
> RMNET data
> + * driver on a
> particular
> + * device.
> + * Args: char[] dev_name: Null terminated ASCII string, max
> length: 15
> + * Returns: status code
> + */
> + RMNET_NETLINK_UNASSOCIATE_NETWORK_DEVICE,
> +
> + /* RMNET_NETLINK_GET_NETWORK_DEVICE_ASSOCIATED - Get if
> RMNET data
> + * driver is
> registered on a
> + * particular
> device.
> + * Args: char[] dev_name: Null terminated ASCII string, max
> length: 15
> + * Returns: 1 if registered, 0 if not
> + */
> + RMNET_NETLINK_GET_NETWORK_DEVICE_ASSOCIATED,
> +
> + /* RMNET_NETLINK_SET_LINK_EGRESS_DATA_FORMAT - Sets the
> egress data
> + * format for a
> particular
> + * link.
> + * Args: __le32 egress_flags
> + * char[] dev_name: Null terminated ASCII string, max
> length: 15
> + * Returns: status code
> + */
> + RMNET_NETLINK_SET_LINK_EGRESS_DATA_FORMAT,
> +
> + /* RMNET_NETLINK_GET_LINK_EGRESS_DATA_FORMAT - Gets the
> egress data
> + * format for a
> particular
> + * link.
> + * Args: char[] dev_name: Null terminated ASCII string, max
> length: 15
> + * Returns: 4-bytes data: __le32 egress_flags
> + */
> + RMNET_NETLINK_GET_LINK_EGRESS_DATA_FORMAT,
> +
> + /* RMNET_NETLINK_SET_LINK_INGRESS_DATA_FORMAT - Sets the
> ingress data
> + * format for a
> particular
> + * link.
> + * Args: __le32 ingress_flags
> + * char[] dev_name: Null terminated ASCII string, max
> length: 15
> + * Returns: status code
> + */
> + RMNET_NETLINK_SET_LINK_INGRESS_DATA_FORMAT,
> +
> + /* RMNET_NETLINK_GET_LINK_INGRESS_DATA_FORMAT - Gets the
> ingress data
> + * format for a
> particular
> + * link.
> + * Args: char[] dev_name: Null terminated ASCII string, max
> length: 15
> + * Returns: 4-bytes data: __le32 ingress_flags
> + */
> + RMNET_NETLINK_GET_LINK_INGRESS_DATA_FORMAT,
> +
> + /* RMNET_NETLINK_SET_LOGICAL_EP_CONFIG - Sets the logical
> endpoint
> + * configuration for a
> particular
> + * link.
> + * Args: char[] dev_name: Null terminated ASCII string, max
> length: 15
> + * __le32 logical_ep_id, valid values are -1 through 31
> + * __u8 rmnet_mode: one of none, vnd, bridged
> + * char[] egress_dev_name: Egress device if operating in
> bridge mode
> + * Returns: status code
> + */
> + RMNET_NETLINK_SET_LOGICAL_EP_CONFIG,
> +
> + /* RMNET_NETLINK_UNSET_LOGICAL_EP_CONFIG - Un-sets the
> logical endpoint
> + * configuration for a
> particular
> + * link.
> + * Args: char[] dev_name: Null terminated ASCII string, max
> length: 15
> + * __le32 logical_ep_id, valid values are -1 through
> 31
> + * Returns: status code
> + */
> + RMNET_NETLINK_UNSET_LOGICAL_EP_CONFIG,
> +
> + /* RMNET_NETLINK_GET_LOGICAL_EP_CONFIG - Gets the logical
> endpoint
> + * configuration for a
> particular
> + * link.
> + * Args: char[] dev_name: Null terminated ASCII string, max
> length: 15
> + * __le32 logical_ep_id, valid values are -1 through
> 31
> + * Returns: __u8 rmnet_mode: one of none, vnd, bridged
> + * char[] egress_dev_name: Egress device
> + */
> + RMNET_NETLINK_GET_LOGICAL_EP_CONFIG,
> +
> + /* RMNET_NETLINK_NEW_VND - Creates a new virtual network
> device node
> + * Args: __le32 node number
> + * Returns: status code
> + */
> + RMNET_NETLINK_NEW_VND,
> +
> + /* RMNET_NETLINK_NEW_VND_WITH_PREFIX - Creates a new virtual
> network
> + * device node with the
> specified
> + * prefix for the device
> name
> + * Args: __le32 node number
> + * char[] vnd_name - Use as prefix
> + * Returns: status code
> + */
> + RMNET_NETLINK_NEW_VND_WITH_PREFIX,
> +
> + /* RMNET_NETLINK_GET_VND_NAME - Gets the string name of a
> VND from ID
> + * Args: __le32 node number
> + * Returns: char[] vnd_name
> + */
> + RMNET_NETLINK_GET_VND_NAME,
> +
> + /* RMNET_NETLINK_FREE_VND - Removes virtual network device
> node
> + * Args: __le32 node number
> + * Returns: status code
> + */
> + RMNET_NETLINK_FREE_VND
> +};
> +
> +enum rmnet_config_endpoint_modes_e {
> + /* Pass the frame up the stack with no modifications to skb-
> >dev */
> + RMNET_EPMODE_NONE,
> + /* Replace skb->dev to a virtual rmnet device and pass up
> the stack */
> + RMNET_EPMODE_VND,
> + /* Pass the frame directly to another device with
> dev_queue_xmit(). */
> + RMNET_EPMODE_BRIDGE,
> + /* Must be the last item in the
> list */
> + RMNET_EPMODE_LENGTH
> +};
> +
> +enum rmnet_config_return_codes_e {
> + RMNET_CONFIG_OK,
> + RMNET_CONFIG_UNKNOWN_MESSAGE,
> + RMNET_CONFIG_UNKNOWN_ERROR,
> + RMNET_CONFIG_NOMEM,
> + RMNET_CONFIG_DEVICE_IN_USE,
> + RMNET_CONFIG_INVALID_REQUEST,
> + RMNET_CONFIG_NO_SUCH_DEVICE,
> + RMNET_CONFIG_BAD_ARGUMENTS,
> + RMNET_CONFIG_BAD_EGRESS_DEVICE,
> + RMNET_CONFIG_TC_HANDLE_FULL
> +};
> +
> +#endif /* _RMNET_DATA_H_ */
> diff --git a/net/Kconfig b/net/Kconfig
> index 102f781..77a0d93 100644
> --- a/net/Kconfig
> +++ b/net/Kconfig
> @@ -239,6 +239,7 @@ source "net/switchdev/Kconfig"
> source "net/l3mdev/Kconfig"
> source "net/qrtr/Kconfig"
> source "net/ncsi/Kconfig"
> +source "net/rmnet_data/Kconfig"
>
> config RPS
> bool
> diff --git a/net/Makefile b/net/Makefile
> index 9b68155..4a04f56 100644
> --- a/net/Makefile
> +++ b/net/Makefile
> @@ -84,3 +84,4 @@ obj-y += l3mdev/
> endif
> obj-$(CONFIG_QRTR) += qrtr/
> obj-$(CONFIG_NET_NCSI) += ncsi/
> +obj-$(CONFIG_RMNET_DATA) += rmnet_data/
> diff --git a/net/rmnet_data/Kconfig b/net/rmnet_data/Kconfig
> new file mode 100644
> index 0000000..4748a6f
> --- /dev/null
> +++ b/net/rmnet_data/Kconfig
> @@ -0,0 +1,21 @@
> +#
> +# RMNET Data and MAP driver
> +#
> +
> +menuconfig RMNET_DATA
> + depends on NETDEVICES
> + bool "RmNet Data and MAP driver"
> + ---help---
> + If you say Y here, then the rmnet_data module will be
> statically
> + compiled into the kernel. The rmnet data module provides
> MAP
> + functionality for embedded and bridged traffic.
> +if RMNET_DATA
> +
> +config RMNET_DATA_DEBUG
> + bool "RmNet Data Debug Logging"
> + ---help---
> + Say Y here if you want RmNet data to be able to log
> packets in main
> + system log. This should not be enabled on production
> builds as it can
> + impact system performance. Note that simply enabling it
> here will not
> + enable the logging; it must be enabled at run-time as
> well.
> +endif # RMNET_DATA
> diff --git a/net/rmnet_data/Makefile b/net/rmnet_data/Makefile
> new file mode 100644
> index 0000000..ccb8b5b
> --- /dev/null
> +++ b/net/rmnet_data/Makefile
> @@ -0,0 +1,14 @@
> +#
> +# Makefile for the RMNET Data module
> +#
> +
> +rmnet_data-y := rmnet_data_main.o
> +rmnet_data-y += rmnet_data_config.o
> +rmnet_data-y += rmnet_data_vnd.o
> +rmnet_data-y += rmnet_data_handlers.o
> +rmnet_data-y += rmnet_map_data.o
> +rmnet_data-y += rmnet_map_command.o
> +rmnet_data-y += rmnet_data_stats.o
> +obj-$(CONFIG_RMNET_DATA) += rmnet_data.o
> +
> +CFLAGS_rmnet_data_main.o := -I$(src)
> diff --git a/net/rmnet_data/rmnet_data_config.c
> b/net/rmnet_data/rmnet_data_config.c
> new file mode 100644
> index 0000000..38a21d8
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_config.c
> @@ -0,0 +1,1168 @@
> +/* Copyright (c) 2013-2017, The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * RMNET Data configuration engine
> + *
> + */
> +
> +#include <net/sock.h>
> +#include <linux/module.h>
> +#include <linux/netlink.h>
> +#include <linux/netdevice.h>
> +#include <linux/skbuff.h>
> +#include <linux/spinlock.h>
> +#include <linux/rmnet_data.h>
> +#include "rmnet_data_config.h"
> +#include "rmnet_data_handlers.h"
> +#include "rmnet_data_vnd.h"
> +#include "rmnet_data_private.h"
> +#include "rmnet_data_trace.h"
> +
> +RMNET_LOG_MODULE(RMNET_DATA_LOGMASK_CONFIG);
> +
> +/* Local Definitions and Declarations */
> +#define RMNET_LOCAL_LOGICAL_ENDPOINT -1
> +
> +static struct sock *nl_socket_handle;
> +
> +static struct netlink_kernel_cfg rmnet_netlink_cfg = {
> + .input = rmnet_config_netlink_msg_handler
> +};
> +
> +static struct notifier_block rmnet_dev_notifier = {
> + .notifier_call = rmnet_config_notify_cb,
> + .next = 0,
> + .priority = 0
> +};
> +
> +struct rmnet_free_vnd_work {
> + struct work_struct work;
> + int vnd_id[RMNET_DATA_MAX_VND];
> + int count;
> +};
> +
> +/* Init and Cleanup */
> +
> +static struct sock *_rmnet_config_start_netlink(void)
> +{
> + return netlink_kernel_create(&init_net,
> + RMNET_NETLINK_PROTO,
> + &rmnet_netlink_cfg);
> +}
> +
> +/* rmnet_config_init() - Startup init
> + *
> + * Registers netlink protocol with kernel and opens socket. Netlink
> handler is
> + * registered with kernel.
> + */
> +int rmnet_config_init(void)
> +{
> + int rc;
> +
> + nl_socket_handle = _rmnet_config_start_netlink();
> + if (!nl_socket_handle) {
> + LOGE("%s", "Failed to init netlink socket");
> + return RMNET_INIT_ERROR;
> + }
> +
> + rc = register_netdevice_notifier(&rmnet_dev_notifier);
> + if (rc != 0) {
> + LOGE("Failed to register device notifier; rc=%d",
> rc);
> + /* TODO: Cleanup the nl socket */
> + return RMNET_INIT_ERROR;
> + }
> +
> + return 0;
> +}
> +
> +/* rmnet_config_exit() - Cleans up all netlink related resources
> + */
> +void rmnet_config_exit(void)
> +{
> + int rc;
> +
> + netlink_kernel_release(nl_socket_handle);
> + rc = unregister_netdevice_notifier(&rmnet_dev_notifier);
> + if (rc != 0)
> + LOGE("Failed to unregister device notifier; rc=%d",
> rc);
> +}
> +
> +/* Helper Functions */
> +
> +/* _rmnet_is_physical_endpoint_associated() - Determines if device
> is associated
> + * @dev: Device to get check
> + *
> + * Compares device rx_handler callback pointer against known
> function
> + *
> + * Return:
> + * - 1 if associated
> + * - 0 if NOT associated
> + */
> +static inline int _rmnet_is_physical_endpoint_associated(struct
> net_device *dev)
> +{
> + rx_handler_func_t *rx_handler;
> +
> + rx_handler = rcu_dereference(dev->rx_handler);
> +
> + if (rx_handler == rmnet_rx_handler)
> + return 1;
> + else
> + return 0;
> +}
> +
> +/* _rmnet_get_phys_ep_config() - Get physical ep config for an
> associated device
> + * @dev: Device to get endpoint configuration from
> + *
> + * Return:
> + * - pointer to configuration if successful
> + * - 0 (null) if device is not associated
> + */
> +static inline struct rmnet_phys_ep_conf_s *_rmnet_get_phys_ep_config
> + (struct net_device
> *dev)
> +{
> + if (_rmnet_is_physical_endpoint_associated(dev))
> + return (struct rmnet_phys_ep_conf_s *)
> + rcu_dereference(dev->rx_handler_data);
> + else
> + return 0;
> +}
> +
> +/* _rmnet_get_logical_ep() - Gets the logical end point
> configuration
> + * structure for a network device
> + * @dev: Device to get endpoint configuration from
> + * @config_id: Logical endpoint id on device
> + * Retrieves the logical_endpoint_config structure.
> + *
> + * Return:
> + * - End point configuration structure
> + * - NULL in case of an error
> + */
> +struct rmnet_logical_ep_conf_s *_rmnet_get_logical_ep(struct
> net_device *dev,
> + int config_id)
> +{
> + struct rmnet_phys_ep_conf_s *config;
> + struct rmnet_logical_ep_conf_s *epconfig_l;
> +
> + if (rmnet_vnd_is_vnd(dev)) {
> + epconfig_l = rmnet_vnd_get_le_config(dev);
> + } else {
> + config = _rmnet_get_phys_ep_config(dev);
> +
> + if (!config)
> + return NULL;
> +
> + if (config_id == RMNET_LOCAL_LOGICAL_ENDPOINT)
> + epconfig_l = &config->local_ep;
> + else
> + epconfig_l = &config->muxed_ep[config_id];
> + }
> +
> + return epconfig_l;
> +}
> +
> +static void _rmnet_netlink_set_link_egress_data_format
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + struct net_device *dev;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> + dev = dev_get_by_name(&init_net, rmnet_header-
> >data_format.dev);
> +
> + if (!dev) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_NO_SUCH_DEVICE;
> + return;
> + }
> +
> + resp_rmnet->return_code =
> + rmnet_set_egress_data_format(dev,
> + rmnet_header-
> >data_format.flags,
> + rmnet_header-
> >data_format.agg_size,
> + rmnet_header-
> >data_format.agg_count
> + );
> + dev_put(dev);
> +}
> +
> +static void _rmnet_netlink_set_link_ingress_data_format
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + struct net_device *dev;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> +
> + dev = dev_get_by_name(&init_net, rmnet_header-
> >data_format.dev);
> + if (!dev) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_NO_SUCH_DEVICE;
> + return;
> + }
> +
> + resp_rmnet->return_code = rmnet_set_ingress_data_format(
> + dev,
> + rmnet_header-
> >data_format.flags);
> + dev_put(dev);
> +}
> +
> +static void _rmnet_netlink_set_logical_ep_config
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + struct net_device *dev, *dev2;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> + if (rmnet_header->local_ep_config.ep_id < -1 ||
> + rmnet_header->local_ep_config.ep_id > 254) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_BAD_ARGUMENTS;
> + return;
> + }
> +
> + dev = dev_get_by_name(&init_net,
> + rmnet_header->local_ep_config.dev);
> +
> + dev2 = dev_get_by_name(&init_net,
> + rmnet_header-
> >local_ep_config.next_dev);
> +
> + if (dev && dev2)
> + resp_rmnet->return_code =
> + rmnet_set_logical_endpoint_config(
> + dev,
> + rmnet_header->local_ep_config.ep_id,
> + rmnet_header-
> >local_ep_config.operating_mode,
> + dev2);
> + else
> + resp_rmnet->return_code =
> RMNET_CONFIG_NO_SUCH_DEVICE;
> +
> + if (dev)
> + dev_put(dev);
> + if (dev2)
> + dev_put(dev2);
> +}
> +
> +static void _rmnet_netlink_unset_logical_ep_config
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + struct net_device *dev;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> + if (rmnet_header->local_ep_config.ep_id < -1 ||
> + rmnet_header->local_ep_config.ep_id > 254) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_BAD_ARGUMENTS;
> + return;
> + }
> +
> + dev = dev_get_by_name(&init_net, rmnet_header-
> >local_ep_config.dev);
> +
> + if (dev) {
> + resp_rmnet->return_code =
> + rmnet_unset_logical_endpoint_config(
> + dev,
> + rmnet_header-
> >local_ep_config.ep_id);
> + dev_put(dev);
> + } else {
> + resp_rmnet->return_code =
> RMNET_CONFIG_NO_SUCH_DEVICE;
> + }
> +}
> +
> +static void _rmnet_netlink_get_logical_ep_config
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + struct net_device *dev;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> + if (rmnet_header->local_ep_config.ep_id < -1 ||
> + rmnet_header->local_ep_config.ep_id > 254) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_BAD_ARGUMENTS;
> + return;
> + }
> +
> + dev = dev_get_by_name(&init_net, rmnet_header-
> >local_ep_config.dev);
> +
> + if (dev) {
> + resp_rmnet->return_code =
> + rmnet_get_logical_endpoint_config(
> + dev,
> + rmnet_header->local_ep_config.ep_id,
> + &resp_rmnet-
> >local_ep_config.operating_mode,
> + resp_rmnet-
> >local_ep_config.next_dev,
> + sizeof(resp_rmnet-
> >local_ep_config.next_dev));
> + } else {
> + resp_rmnet->return_code =
> RMNET_CONFIG_NO_SUCH_DEVICE;
> + return;
> + }
> +
> + if (resp_rmnet->return_code == RMNET_CONFIG_OK) {
> + /* Begin Data */
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNDATA;
> + resp_rmnet->arg_length = sizeof(((struct
> rmnet_nl_msg_s *)0)
> + ->local_ep_config);
> + }
> + dev_put(dev);
> +}
> +
> +static void _rmnet_netlink_associate_network_device
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + struct net_device *dev;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> +
> + dev = dev_get_by_name(&init_net, rmnet_header->data);
> + if (!dev) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_NO_SUCH_DEVICE;
> + return;
> + }
> +
> + resp_rmnet->return_code =
> rmnet_associate_network_device(dev);
> + dev_put(dev);
> +}
> +
> +static void _rmnet_netlink_unassociate_network_device
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + struct net_device *dev;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> +
> + dev = dev_get_by_name(&init_net, rmnet_header->data);
> + if (!dev) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_NO_SUCH_DEVICE;
> + return;
> + }
> +
> + resp_rmnet->return_code =
> rmnet_unassociate_network_device(dev);
> + dev_put(dev);
> +}
> +
> +static void _rmnet_netlink_get_network_device_associated
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + struct net_device *dev;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> +
> + dev = dev_get_by_name(&init_net, rmnet_header->data);
> + if (!dev) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_NO_SUCH_DEVICE;
> + return;
> + }
> +
> + resp_rmnet->return_code =
> _rmnet_is_physical_endpoint_associated(dev);
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNDATA;
> + dev_put(dev);
> +}
> +
> +static void _rmnet_netlink_get_link_egress_data_format
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + struct net_device *dev;
> + struct rmnet_phys_ep_conf_s *config;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> +
> + dev = dev_get_by_name(&init_net, rmnet_header-
> >data_format.dev);
> + if (!dev) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_NO_SUCH_DEVICE;
> + return;
> + }
> +
> + config = _rmnet_get_phys_ep_config(dev);
> + if (!config) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_INVALID_REQUEST;
> + dev_put(dev);
> + return;
> + }
> +
> + /* Begin Data */
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNDATA;
> + resp_rmnet->arg_length = sizeof(((struct rmnet_nl_msg_s *)0)
> + ->data_format);
> + resp_rmnet->data_format.flags = config->egress_data_format;
> + resp_rmnet->data_format.agg_count = 0;
> + resp_rmnet->data_format.agg_size = 0;
> + dev_put(dev);
> +}
> +
> +static void _rmnet_netlink_get_link_ingress_data_format
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + struct net_device *dev;
> + struct rmnet_phys_ep_conf_s *config;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> +
> + dev = dev_get_by_name(&init_net, rmnet_header-
> >data_format.dev);
> + if (!dev) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_NO_SUCH_DEVICE;
> + return;
> + }
> +
> + config = _rmnet_get_phys_ep_config(dev);
> + if (!config) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_INVALID_REQUEST;
> + dev_put(dev);
> + return;
> + }
> +
> + /* Begin Data */
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNDATA;
> + resp_rmnet->arg_length = sizeof(((struct rmnet_nl_msg_s *)0)
> + ->data_format);
> + resp_rmnet->data_format.flags = config->ingress_data_format;
> + dev_put(dev);
> +}
> +
> +static void _rmnet_netlink_get_vnd_name
> + (struct rmnet_nl_msg_s
> *rmnet_header,
> + struct rmnet_nl_msg_s
> *resp_rmnet)
> +{
> + int r;
> +
> + if (!rmnet_header || !resp_rmnet)
> + return;
> +
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> +
> + r = rmnet_vnd_get_name(rmnet_header->vnd.id, resp_rmnet-
> >vnd.vnd_name,
> + RMNET_MAX_STR_LEN);
> +
> + if (r != 0) {
> + resp_rmnet->return_code =
> RMNET_CONFIG_INVALID_REQUEST;
> + return;
> + }
> +
> + /* Begin Data */
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNDATA;
> + resp_rmnet->arg_length = sizeof(((struct rmnet_nl_msg_s
> *)0)->vnd);
> +}
> +
> +/* rmnet_config_netlink_msg_handler() - Netlink message handler
> callback
> + * @skb: Packet containing netlink messages
> + *
> + * Standard kernel-expected format for a netlink message handler.
> Processes SKBs
> + * which contain RmNet data specific netlink messages.
> + */
> +void rmnet_config_netlink_msg_handler(struct sk_buff *skb)
> +{
> + struct nlmsghdr *nlmsg_header, *resp_nlmsg;
> + struct rmnet_nl_msg_s *rmnet_header, *resp_rmnet;
> + int return_pid, response_data_length;
> + struct sk_buff *skb_response;
> +
> + response_data_length = 0;
> + nlmsg_header = (struct nlmsghdr *)skb->data;
> + rmnet_header = (struct rmnet_nl_msg_s
> *)nlmsg_data(nlmsg_header);
> +
> + if (!nlmsg_header->nlmsg_pid ||
> + (nlmsg_header->nlmsg_len < sizeof(struct nlmsghdr) +
> + sizeof(struct
> rmnet_nl_msg_s)))
> + return;
> +
> + LOGL("Netlink message pid=%d, seq=%d, length=%d,
> rmnet_type=%d",
> + nlmsg_header->nlmsg_pid,
> + nlmsg_header->nlmsg_seq,
> + nlmsg_header->nlmsg_len,
> + rmnet_header->message_type);
> +
> + return_pid = nlmsg_header->nlmsg_pid;
> +
> + skb_response = nlmsg_new(sizeof(struct nlmsghdr)
> + + sizeof(struct rmnet_nl_msg_s),
> + GFP_KERNEL);
> +
> + if (!skb_response) {
> + LOGH("%s", "Failed to allocate response buffer");
> + return;
> + }
> +
> + resp_nlmsg = nlmsg_put(skb_response,
> + 0,
> + nlmsg_header->nlmsg_seq,
> + NLMSG_DONE,
> + sizeof(struct rmnet_nl_msg_s),
> + 0);
> +
> + resp_rmnet = nlmsg_data(resp_nlmsg);
> +
> + if (!resp_rmnet)
> + return;
> +
> + resp_rmnet->message_type = rmnet_header->message_type;
> + rtnl_lock();
> + switch (rmnet_header->message_type) {
> + case RMNET_NETLINK_ASSOCIATE_NETWORK_DEVICE:
> + _rmnet_netlink_associate_network_device
> + (rmnet_header,
> resp_rmnet);
> + break;
> +
> + case RMNET_NETLINK_UNASSOCIATE_NETWORK_DEVICE:
> + _rmnet_netlink_unassociate_network_device
> + (rmnet_header,
> resp_rmnet);
> + break;
> +
> + case RMNET_NETLINK_GET_NETWORK_DEVICE_ASSOCIATED:
> + _rmnet_netlink_get_network_device_associated
> + (rmnet_header,
> resp_rmnet);
> + break;
> +
> + case RMNET_NETLINK_SET_LINK_EGRESS_DATA_FORMAT:
> + _rmnet_netlink_set_link_egress_data_format
> + (rmnet_header,
> resp_rmnet);
> + break;
> +
> + case RMNET_NETLINK_GET_LINK_EGRESS_DATA_FORMAT:
> + _rmnet_netlink_get_link_egress_data_format
> + (rmnet_header,
> resp_rmnet);
> + break;
> +
> + case RMNET_NETLINK_SET_LINK_INGRESS_DATA_FORMAT:
> + _rmnet_netlink_set_link_ingress_data_format
> + (rmnet_header,
> resp_rmnet);
> + break;
> +
> + case RMNET_NETLINK_GET_LINK_INGRESS_DATA_FORMAT:
> + _rmnet_netlink_get_link_ingress_data_format
> + (rmnet_header,
> resp_rmnet);
> + break;
> +
> + case RMNET_NETLINK_SET_LOGICAL_EP_CONFIG:
> + _rmnet_netlink_set_logical_ep_config(rmnet_header,
> resp_rmnet);
> + break;
> +
> + case RMNET_NETLINK_UNSET_LOGICAL_EP_CONFIG:
> + _rmnet_netlink_unset_logical_ep_config(rmnet_header,
> + resp_rmnet);
> + break;
> +
> + case RMNET_NETLINK_GET_LOGICAL_EP_CONFIG:
> + _rmnet_netlink_get_logical_ep_config(rmnet_header,
> resp_rmnet);
> + break;
> +
> + case RMNET_NETLINK_NEW_VND:
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> + resp_rmnet->return_code =
> + rmnet_create_vnd(rmnet_head
> er->vnd.id);
> + break;
> +
> + case RMNET_NETLINK_NEW_VND_WITH_PREFIX:
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> + resp_rmnet->return_code = rmnet_create_vnd_prefix(
> + rmnet_header-
> >vnd.id,
> + rmnet_header-
> >vnd.vnd_name);
> + break;
> +
> + case RMNET_NETLINK_FREE_VND:
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> + /* Please check rmnet_vnd_free_dev documentation
> regarding
> + * the below locking sequence
> + */
> + rtnl_unlock();
> + resp_rmnet->return_code =
> rmnet_free_vnd(rmnet_header->vnd.id);
> + rtnl_lock();
> + break;
> +
> + case RMNET_NETLINK_GET_VND_NAME:
> + _rmnet_netlink_get_vnd_name(rmnet_header,
> resp_rmnet);
> + break;
> +
> + default:
> + resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
> + resp_rmnet->return_code =
> RMNET_CONFIG_UNKNOWN_MESSAGE;
> + break;
> + }
> + rtnl_unlock();
> + nlmsg_unicast(nl_socket_handle, skb_response, return_pid);
> + LOGD("%s", "Done processing command");
> +}
> +
> +/* Configuration API */
> +
> +/* rmnet_unassociate_network_device() - Unassociate network device
> + * @dev: Device to unassociate
> + *
> + * Frees all structures generate for device. Unregisters rx_handler
> + * todo: needs to do some sanity verification first (is device in
> use, etc...)
> + *
> + * Return:
> + * - RMNET_CONFIG_OK if successful
> + * - RMNET_CONFIG_NO_SUCH_DEVICE dev is null
> + * - RMNET_CONFIG_INVALID_REQUEST if device is not already
> associated
> + * - RMNET_CONFIG_DEVICE_IN_USE if device has logical ep that
> wasn't unset
> + * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is
> null
> + */
> +int rmnet_unassociate_network_device(struct net_device *dev)
> +{
> + struct rmnet_phys_ep_conf_s *config;
> + int config_id = RMNET_LOCAL_LOGICAL_ENDPOINT;
> + struct rmnet_logical_ep_conf_s *epconfig_l;
> +
> + ASSERT_RTNL();
> +
> + LOGL("(%s);", dev->name);
> +
> + if (!dev)
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> +
> + if (!_rmnet_is_physical_endpoint_associated(dev))
> + return RMNET_CONFIG_INVALID_REQUEST;
> +
> + for (; config_id < RMNET_DATA_MAX_LOGICAL_EP; config_id++) {
> + epconfig_l = _rmnet_get_logical_ep(dev, config_id);
> + if (epconfig_l && epconfig_l->refcount)
> + return RMNET_CONFIG_DEVICE_IN_USE;
> + }
> +
> + config = (struct rmnet_phys_ep_conf_s *)
> + rcu_dereference(dev->rx_handler_data);
> +
> + if (!config)
> + return RMNET_CONFIG_UNKNOWN_ERROR;
> +
> + kfree(config);
> +
> + netdev_rx_handler_unregister(dev);
> +
> + /* Explicitly release the reference from the device */
> + dev_put(dev);
> + trace_rmnet_unassociate(dev);
> + return RMNET_CONFIG_OK;
> +}
> +
> +/* rmnet_set_ingress_data_format() - Set ingress data format on
> network device
> + * @dev: Device to ingress data format on
> + * @egress_data_format: 32-bit unsigned bitmask of ingress format
> + *
> + * Network device must already have association with RmNet Data
> driver
> + *
> + * Return:
> + * - RMNET_CONFIG_OK if successful
> + * - RMNET_CONFIG_NO_SUCH_DEVICE dev is null
> + * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is
> null
> + */
> +int rmnet_set_ingress_data_format(struct net_device *dev,
> + u32 ingress_data_format)
> +{
> + struct rmnet_phys_ep_conf_s *config;
> +
> + ASSERT_RTNL();
> +
> + LOGL("(%s,0x%08X);", dev->name, ingress_data_format);
> +
> + if (!dev)
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> +
> + config = _rmnet_get_phys_ep_config(dev);
> +
> + if (!config)
> + return RMNET_CONFIG_INVALID_REQUEST;
> +
> + config->ingress_data_format = ingress_data_format;
> +
> + return RMNET_CONFIG_OK;
> +}
> +
> +/* rmnet_set_egress_data_format() - Set egress data format on
> network device
> + * @dev: Device to egress data format on
> + * @egress_data_format: 32-bit unsigned bitmask of egress format
> + *
> + * Network device must already have association with RmNet Data
> driver
> + * todo: Bounds check on agg_*
> + *
> + * Return:
> + * - RMNET_CONFIG_OK if successful
> + * - RMNET_CONFIG_NO_SUCH_DEVICE dev is null
> + * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is
> null
> + */
> +int rmnet_set_egress_data_format(struct net_device *dev,
> + u32 egress_data_format,
> + u16 agg_size,
> + u16 agg_count)
> +{
> + struct rmnet_phys_ep_conf_s *config;
> +
> + ASSERT_RTNL();
> +
> + LOGL("(%s,0x%08X, %d, %d);",
> + dev->name, egress_data_format, agg_size, agg_count);
> +
> + if (!dev)
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> +
> + config = _rmnet_get_phys_ep_config(dev);
> +
> + if (!config)
> + return RMNET_CONFIG_UNKNOWN_ERROR;
> +
> + config->egress_data_format = egress_data_format;
> +
> + return RMNET_CONFIG_OK;
> +}
> +
> +/* rmnet_associate_network_device() - Associate network device
> + * @dev: Device to register with RmNet data
> + *
> + * Typically used on physical network devices. Registers RX handler
> and private
> + * metadata structures.
> + *
> + * Return:
> + * - RMNET_CONFIG_OK if successful
> + * - RMNET_CONFIG_NO_SUCH_DEVICE dev is null
> + * - RMNET_CONFIG_INVALID_REQUEST if the device to be
> associated is a vnd
> + * - RMNET_CONFIG_DEVICE_IN_USE if dev rx_handler is already
> filled
> + * - RMNET_CONFIG_DEVICE_IN_USE if netdev_rx_handler_register()
> fails
> + */
> +int rmnet_associate_network_device(struct net_device *dev)
> +{
> + struct rmnet_phys_ep_conf_s *config;
> + int rc;
> +
> + ASSERT_RTNL();
> +
> + LOGL("(%s);\n", dev->name);
> +
> + if (!dev)
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> +
> + if (_rmnet_is_physical_endpoint_associated(dev)) {
> + LOGM("%s is already regestered", dev->name);
> + return RMNET_CONFIG_DEVICE_IN_USE;
> + }
> +
> + if (rmnet_vnd_is_vnd(dev)) {
> + LOGM("%s is a vnd", dev->name);
> + return RMNET_CONFIG_INVALID_REQUEST;
> + }
> +
> + config = kmalloc(sizeof(*config), GFP_ATOMIC);
> +
> + if (!config)
> + return RMNET_CONFIG_NOMEM;
> +
> + memset(config, 0, sizeof(struct rmnet_phys_ep_conf_s));
> + config->dev = dev;
> +
> + rc = netdev_rx_handler_register(dev, rmnet_rx_handler,
> config);
> +
> + if (rc) {
> + LOGM("netdev_rx_handler_register returns %d", rc);
> + kfree(config);
> + return RMNET_CONFIG_DEVICE_IN_USE;
> + }
> +
> + /* Explicitly hold a reference to the device */
> + dev_hold(dev);
> + trace_rmnet_associate(dev);
> + return RMNET_CONFIG_OK;
> +}
> +
> +/* _rmnet_set_logical_endpoint_config() - Set logical endpoing
> config on device
> + * @dev: Device to set endpoint configuration on
> + * @config_id: logical endpoint id on device
> + * @epconfig: endpoing configuration structure to set
> + *
> + * Return:
> + * - RMNET_CONFIG_OK if successful
> + * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is
> null
> + * - RMNET_CONFIG_NO_SUCH_DEVICE if device to set config on is
> null
> + * - RMNET_CONFIG_DEVICE_IN_USE if device already has a logical
> ep
> + * - RMNET_CONFIG_BAD_ARGUMENTS if logical endpoint id is out
> of range
> + */
> +int _rmnet_set_logical_endpoint_config(struct net_device *dev,
> + int config_id,
> + struct
> rmnet_logical_ep_conf_s *epconfig)
> +{
> + struct rmnet_logical_ep_conf_s *epconfig_l;
> +
> + ASSERT_RTNL();
> +
> + if (!dev)
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> +
> + if (config_id < RMNET_LOCAL_LOGICAL_ENDPOINT ||
> + config_id >= RMNET_DATA_MAX_LOGICAL_EP)
> + return RMNET_CONFIG_BAD_ARGUMENTS;
> +
> + epconfig_l = _rmnet_get_logical_ep(dev, config_id);
> +
> + if (!epconfig_l)
> + return RMNET_CONFIG_UNKNOWN_ERROR;
> +
> + if (epconfig_l->refcount)
> + return RMNET_CONFIG_DEVICE_IN_USE;
> +
> + memcpy(epconfig_l, epconfig, sizeof(struct
> rmnet_logical_ep_conf_s));
> + if (config_id == RMNET_LOCAL_LOGICAL_ENDPOINT)
> + epconfig_l->mux_id = 0;
> + else
> + epconfig_l->mux_id = config_id;
> +
> + /* Explicitly hold a reference to the egress device */
> + dev_hold(epconfig_l->egress_dev);
> + return RMNET_CONFIG_OK;
> +}
> +
> +/* _rmnet_unset_logical_endpoint_config() - Un-set the logical
> endpoing config
> + * on device
> + * @dev: Device to set endpoint configuration on
> + * @config_id: logical endpoint id on device
> + *
> + * Return:
> + * - RMNET_CONFIG_OK if successful
> + * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is
> null
> + * - RMNET_CONFIG_NO_SUCH_DEVICE if device to set config on is
> null
> + * - RMNET_CONFIG_BAD_ARGUMENTS if logical endpoint id is out
> of range
> + */
> +int _rmnet_unset_logical_endpoint_config(struct net_device *dev,
> + int config_id)
> +{
> + struct rmnet_logical_ep_conf_s *epconfig_l = 0;
> +
> + ASSERT_RTNL();
> +
> + if (!dev)
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> +
> + if (config_id < RMNET_LOCAL_LOGICAL_ENDPOINT ||
> + config_id >= RMNET_DATA_MAX_LOGICAL_EP)
> + return RMNET_CONFIG_BAD_ARGUMENTS;
> +
> + epconfig_l = _rmnet_get_logical_ep(dev, config_id);
> +
> + if (!epconfig_l || !epconfig_l->refcount)
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> +
> + /* Explicitly release the reference from the egress device
> */
> + dev_put(epconfig_l->egress_dev);
> + memset(epconfig_l, 0, sizeof(struct
> rmnet_logical_ep_conf_s));
> +
> + return RMNET_CONFIG_OK;
> +}
> +
> +/* rmnet_set_logical_endpoint_config() - Set logical endpoint config
> on a device
> + * @dev: Device to set endpoint configuration on
> + * @config_id: logical endpoint id on device
> + * @rmnet_mode: endpoint mode. Values from:
> rmnet_config_endpoint_modes_e
> + * @egress_device: device node to forward packet to once done
> processing in
> + * ingress/egress handlers
> + *
> + * Creates a logical_endpoint_config structure and fills in the
> information from
> + * function arguments. Calls _rmnet_set_logical_endpoint_config() to
> finish
> + * configuration. Network device must already have association with
> RmNet Data
> + * driver
> + *
> + * Return:
> + * - RMNET_CONFIG_OK if successful
> + * - RMNET_CONFIG_BAD_EGRESS_DEVICE if egress device is null
> + * - RMNET_CONFIG_BAD_EGRESS_DEVICE if egress device is not
> handled by
> + * RmNet data module
> + * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is
> null
> + * - RMNET_CONFIG_NO_SUCH_DEVICE if device to set config on is
> null
> + * - RMNET_CONFIG_BAD_ARGUMENTS if logical endpoint id is out
> of range
> + */
> +int rmnet_set_logical_endpoint_config(struct net_device *dev,
> + int config_id,
> + u8 rmnet_mode,
> + struct net_device *egress_dev)
> +{
> + struct rmnet_logical_ep_conf_s epconfig;
> +
> + LOGL("(%s, %d, %d, %s);",
> + dev->name, config_id, rmnet_mode, egress_dev->name);
> +
> + if (!egress_dev ||
> + ((!_rmnet_is_physical_endpoint_associated(egress_dev))
> &&
> + (!rmnet_vnd_is_vnd(egress_dev)))) {
> + return RMNET_CONFIG_BAD_EGRESS_DEVICE;
> + }
> +
> + memset(&epconfig, 0, sizeof(struct
> rmnet_logical_ep_conf_s));
> + epconfig.refcount = 1;
> + epconfig.rmnet_mode = rmnet_mode;
> + epconfig.egress_dev = egress_dev;
> +
> + return _rmnet_set_logical_endpoint_config(dev, config_id,
> &epconfig);
> +}
> +
> +/* rmnet_unset_logical_endpoint_config() - Un-set logical endpoing
> configuration
> + * on a device
> + * @dev: Device to set endpoint configuration on
> + * @config_id: logical endpoint id on device
> + *
> + * Retrieves the logical_endpoint_config structure and frees the
> egress device.
> + * Network device must already have association with RmNet Data
> driver
> + *
> + * Return:
> + * - RMNET_CONFIG_OK if successful
> + * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is
> null
> + * - RMNET_CONFIG_NO_SUCH_DEVICE device is not associated
> + * - RMNET_CONFIG_BAD_ARGUMENTS if logical endpoint id is out
> of range
> + */
> +int rmnet_unset_logical_endpoint_config(struct net_device *dev,
> + int config_id)
> +{
> + LOGL("(%s, %d);", dev->name, config_id);
> +
> + if (!dev ||
> + ((!_rmnet_is_physical_endpoint_associated(dev)) &&
> + (!rmnet_vnd_is_vnd(dev)))) {
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> + }
> +
> + return _rmnet_unset_logical_endpoint_config(dev, config_id);
> +}
> +
> +/* rmnet_get_logical_endpoint_config() - Gets logical endpoing
> configuration
> + * for a device
> + * @dev: Device to get endpoint configuration on
> + * @config_id: logical endpoint id on device
> + * @rmnet_mode: (I/O) logical endpoint mode
> + * @egress_dev_name: (I/O) logical endpoint egress device name
> + * @egress_dev_name_size: The maximal size of the I/O
> egress_dev_name
> + *
> + * Retrieves the logical_endpoint_config structure.
> + * Network device must already have association with RmNet Data
> driver
> + *
> + * Return:
> + * - RMNET_CONFIG_OK if successful
> + * - RMNET_CONFIG_UNKNOWN_ERROR net_device private section is
> null
> + * - RMNET_CONFIG_NO_SUCH_DEVICE device is not associated
> + * - RMNET_CONFIG_BAD_ARGUMENTS if logical endpoint id is out
> of range or
> + * if the provided buffer size for egress dev name is too
> short
> + */
> +int rmnet_get_logical_endpoint_config(struct net_device *dev,
> + int config_id,
> + u8 *rmnet_mode,
> + u8 *egress_dev_name,
> + size_t egress_dev_name_size)
> +{
> + struct rmnet_logical_ep_conf_s *epconfig_l = 0;
> + size_t strlcpy_res = 0;
> +
> + LOGL("(%s, %d);", dev->name, config_id);
> +
> + if (!egress_dev_name || !rmnet_mode)
> + return RMNET_CONFIG_BAD_ARGUMENTS;
> + if (config_id < RMNET_LOCAL_LOGICAL_ENDPOINT ||
> + config_id >= RMNET_DATA_MAX_LOGICAL_EP)
> + return RMNET_CONFIG_BAD_ARGUMENTS;
> +
> + epconfig_l = _rmnet_get_logical_ep(dev, config_id);
> +
> + if (!epconfig_l || !epconfig_l->refcount)
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> +
> + *rmnet_mode = epconfig_l->rmnet_mode;
> +
> + strlcpy_res = strlcpy(egress_dev_name, epconfig_l-
> >egress_dev->name,
> + egress_dev_name_size);
> +
> + if (strlcpy_res >= egress_dev_name_size)
> + return RMNET_CONFIG_BAD_ARGUMENTS;
> +
> + return RMNET_CONFIG_OK;
> +}
> +
> +/* rmnet_create_vnd() - Create virtual network device node
> + * @id: RmNet virtual device node id
> + *
> + * Return:
> + * - result of rmnet_vnd_create_dev()
> + */
> +int rmnet_create_vnd(int id)
> +{
> + struct net_device *dev;
> +
> + ASSERT_RTNL();
> + LOGL("(%d);", id);
> + return rmnet_vnd_create_dev(id, &dev, NULL);
> +}
> +
> +/* rmnet_create_vnd() - Create virtual network device node
> + * @id: RmNet virtual device node id
> + * @prefix: String prefix for device name
> + *
> + * Return:
> + * - result of rmnet_vnd_create_dev()
> + */
> +int rmnet_create_vnd_prefix(int id, const char *prefix)
> +{
> + struct net_device *dev;
> +
> + ASSERT_RTNL();
> + LOGL("(%d, \"%s\");", id, prefix);
> + return rmnet_vnd_create_dev(id, &dev, prefix);
> +}
> +
> +/* rmnet_free_vnd() - Free virtual network device node
> + * @id: RmNet virtual device node id
> + *
> + * Return:
> + * - result of rmnet_vnd_free_dev()
> + */
> +int rmnet_free_vnd(int id)
> +{
> + LOGL("(%d);", id);
> + return rmnet_vnd_free_dev(id);
> +}
> +
> +static void _rmnet_free_vnd_later(struct work_struct *work)
> +{
> + int i;
> + struct rmnet_free_vnd_work *fwork;
> +
> + fwork = container_of(work, struct rmnet_free_vnd_work,
> work);
> +
> + for (i = 0; i < fwork->count; i++)
> + rmnet_free_vnd(fwork->vnd_id[i]);
> + kfree(fwork);
> +}
> +
> +/* rmnet_force_unassociate_device() - Force a device to unassociate
> + * @dev: Device to unassociate
> + *
> + * Return:
> + * - void
> + */
> +static void rmnet_force_unassociate_device(struct net_device *dev)
> +{
> + int i, j;
> + struct net_device *vndev;
> + struct rmnet_logical_ep_conf_s *cfg;
> + struct rmnet_free_vnd_work *vnd_work;
> +
> + ASSERT_RTNL();
> + if (!dev)
> + return;
> +
> + if (!_rmnet_is_physical_endpoint_associated(dev)) {
> + LOGM("%s", "Called on unassociated device,
> skipping");
> + return;
> + }
> +
> + trace_rmnet_unregister_cb_clear_vnds(dev);
> + vnd_work = kmalloc(sizeof(*vnd_work), GFP_KERNEL);
> + if (!vnd_work) {
> + LOGH("%s", "Out of Memory");
> + return;
> + }
> + INIT_WORK(&vnd_work->work, _rmnet_free_vnd_later);
> + vnd_work->count = 0;
> +
> + /* Check the VNDs for offending mappings */
> + for (i = 0, j = 0; i < RMNET_DATA_MAX_VND &&
> + j < RMNET_DATA_MAX_VND; i++) {
> + vndev = rmnet_vnd_get_by_id(i);
> + if (!vndev) {
> + LOGL("VND %d not in use; skipping", i);
> + continue;
> + }
> + cfg = rmnet_vnd_get_le_config(vndev);
> + if (!cfg) {
> + LOGH("Got NULL config from VND %d", i);
> + continue;
> + }
> + if (cfg->refcount && (cfg->egress_dev == dev)) {
> + /* Make sure the device is down before
> clearing any of
> + * the mappings. Otherwise we could see a
> potential
> + * race condition if packets are actively
> being
> + * transmitted.
> + */
> + dev_close(vndev);
> + rmnet_unset_logical_endpoint_config
> + (vndev,
> RMNET_LOCAL_LOGICAL_ENDPOINT);
> + vnd_work->vnd_id[j] = i;
> + j++;
> + }
> + }
> + if (j > 0) {
> + vnd_work->count = j;
> + schedule_work(&vnd_work->work);
> + } else {
> + kfree(vnd_work);
> + }
> +
> + /* Clear the mappings on the phys ep */
> + trace_rmnet_unregister_cb_clear_lepcs(dev);
> + rmnet_unset_logical_endpoint_config(dev,
> RMNET_LOCAL_LOGICAL_ENDPOINT);
> + for (i = 0; i < RMNET_DATA_MAX_LOGICAL_EP; i++)
> + rmnet_unset_logical_endpoint_config(dev, i);
> + rmnet_unassociate_network_device(dev);
> +}
> +
> +/* rmnet_config_notify_cb() - Callback for netdevice notifier chain
> + * @nb: Notifier block data
> + * @event: Netdevice notifier event ID
> + * @data: Contains a net device for which we are getting
> notified
> + *
> + * Return:
> + * - result of NOTIFY_DONE()
> + */
> +int rmnet_config_notify_cb(struct notifier_block *nb,
> + unsigned long event, void *data)
> +{
> + struct net_device *dev = netdev_notifier_info_to_dev(data);
> +
> + if (!dev)
> + return NOTIFY_DONE;
> +
> + switch (event) {
> + case NETDEV_UNREGISTER_FINAL:
> + case NETDEV_UNREGISTER:
> + trace_rmnet_unregister_cb_entry(dev);
> + LOGH("Kernel is trying to unregister %s", dev-
> >name);
> + rmnet_force_unassociate_device(dev);
> + trace_rmnet_unregister_cb_exit(dev);
> + break;
> +
> + default:
> + trace_rmnet_unregister_cb_unhandled(dev);
> + LOGD("Unhandeled event [%lu]", event);
> + break;
> + }
> +
> + return NOTIFY_DONE;
> +}
> diff --git a/net/rmnet_data/rmnet_data_config.h
> b/net/rmnet_data/rmnet_data_config.h
> new file mode 100644
> index 0000000..f9da3c6
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_config.h
> @@ -0,0 +1,107 @@
> +/* Copyright (c) 2013-2014, 2016-2017 The Linux Foundation. All
> rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * RMNET Data configuration engine
> + *
> + */
> +
> +#include <linux/types.h>
> +#include <linux/time.h>
> +#include <linux/skbuff.h>
> +
> +#ifndef _RMNET_DATA_CONFIG_H_
> +#define _RMNET_DATA_CONFIG_H_
> +
> +#define RMNET_DATA_MAX_LOGICAL_EP 256
> +
> +/* struct rmnet_logical_ep_conf_s - Logical end-point configuration
> + *
> + * @refcount: Reference count for this endpoint. 0 signifies the
> endpoint is not
> + * configured for use
> + * @rmnet_mode: Specifies how the traffic should be finally
> delivered. Possible
> + * options are available in enum
> rmnet_config_endpoint_modes_e
> + * @mux_id: Virtual channel ID used by MAP protocol
> + * @egress_dev: Next device to deliver the packet to. Exact usage of
> this
> + * parmeter depends on the rmnet_mode
> + */
> +struct rmnet_logical_ep_conf_s {
> + u8 refcount;
> + u8 rmnet_mode;
> + u8 mux_id;
> + struct timespec flush_time;
> + struct net_device *egress_dev;
> +};
> +
> +/* struct rmnet_phys_ep_conf_s - Physical endpoint configuration
> + * One instance of this structure is instantiated for each
> net_device associated
> + * with rmnet_data.
> + *
> + * @dev: The device which is associated with rmnet_data. Corresponds
> to this
> + * specific instance of rmnet_phys_ep_conf_s
> + * @local_ep: Default non-muxed endpoint. Used for non-MAP
> protocols/formats
> + * @muxed_ep: All multiplexed logical endpoints associated with this
> device
> + * @ingress_data_format: RMNET_INGRESS_FORMAT_* flags from
> rmnet_data.h
> + * @egress_data_format: RMNET_EGRESS_FORMAT_* flags from
> rmnet_data.h
> + *
> + * @egress_agg_size: Maximum size (bytes) of data which should be
> aggregated
> + * @egress_agg_count: Maximum count (packets) of data which should
> be aggregated
> + * Smaller of the two parameters above are chosen
> for
> + * aggregation
> + * @tail_spacing: Guaranteed padding (bytes) when de-aggregating
> ingress frames
> + * @agg_time: Wall clock time when aggregated frame was created
> + * @agg_last: Last time the aggregation routing was invoked
> + */
> +struct rmnet_phys_ep_conf_s {
> + struct net_device *dev;
> + struct rmnet_logical_ep_conf_s local_ep;
> + struct rmnet_logical_ep_conf_s
> muxed_ep[RMNET_DATA_MAX_LOGICAL_EP];
> + u32 ingress_data_format;
> + u32 egress_data_format;
> +};
> +
> +int rmnet_config_init(void);
> +void rmnet_config_exit(void);
> +
> +int rmnet_unassociate_network_device(struct net_device *dev);
> +int rmnet_set_ingress_data_format(struct net_device *dev,
> + u32 ingress_data_format);
> +int rmnet_set_egress_data_format(struct net_device *dev,
> + u32 egress_data_format,
> + u16 agg_size,
> + u16 agg_count);
> +int rmnet_associate_network_device(struct net_device *dev);
> +int _rmnet_set_logical_endpoint_config(struct net_device *dev,
> + int config_id,
> + struct rmnet_logical_ep_conf_s
> *epconfig);
> +int rmnet_set_logical_endpoint_config(struct net_device *dev,
> + int config_id,
> + u8 rmnet_mode,
> + struct net_device
> *egress_dev);
> +int _rmnet_unset_logical_endpoint_config(struct net_device *dev,
> + int config_id);
> +int rmnet_unset_logical_endpoint_config(struct net_device *dev,
> + int config_id);
> +int _rmnet_get_logical_endpoint_config(struct net_device *dev,
> + int config_id,
> + struct rmnet_logical_ep_conf_s
> *epconfig);
> +int rmnet_get_logical_endpoint_config(struct net_device *dev,
> + int config_id,
> + u8 *rmnet_mode,
> + u8 *egress_dev_name,
> + size_t egress_dev_name_size);
> +void rmnet_config_netlink_msg_handler (struct sk_buff *skb);
> +int rmnet_config_notify_cb(struct notifier_block *nb,
> + unsigned long event, void *data);
> +int rmnet_create_vnd(int id);
> +int rmnet_create_vnd_prefix(int id, const char *name);
> +int rmnet_free_vnd(int id);
> +
> +#endif /* _RMNET_DATA_CONFIG_H_ */
> diff --git a/net/rmnet_data/rmnet_data_handlers.c
> b/net/rmnet_data/rmnet_data_handlers.c
> new file mode 100644
> index 0000000..e95d1ef
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_handlers.c
> @@ -0,0 +1,556 @@
> +/* Copyright (c) 2013-2017, The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * RMNET Data ingress/egress handler
> + *
> + */
> +
> +#include <linux/skbuff.h>
> +#include <linux/netdevice.h>
> +#include <linux/module.h>
> +#include <linux/rmnet_data.h>
> +#include <linux/netdev_features.h>
> +#include <linux/ip.h>
> +#include <linux/ipv6.h>
> +#include "rmnet_data_private.h"
> +#include "rmnet_data_config.h"
> +#include "rmnet_data_vnd.h"
> +#include "rmnet_map.h"
> +#include "rmnet_data_stats.h"
> +#include "rmnet_data_trace.h"
> +#include "rmnet_data_handlers.h"
> +
> +RMNET_LOG_MODULE(RMNET_DATA_LOGMASK_HANDLER);
> +
> +#ifdef CONFIG_RMNET_DATA_DEBUG
> +unsigned int dump_pkt_rx;
> +module_param(dump_pkt_rx, uint, 0644);
> +MODULE_PARM_DESC(dump_pkt_rx, "Dump packets entering ingress
> handler");
> +
> +unsigned int dump_pkt_tx;
> +module_param(dump_pkt_tx, uint, 0644);
> +MODULE_PARM_DESC(dump_pkt_tx, "Dump packets exiting egress
> handler");
> +#endif /* CONFIG_RMNET_DATA_DEBUG */
> +
> +#define RMNET_DATA_IP_VERSION_4 0x40
> +#define RMNET_DATA_IP_VERSION_6 0x60
> +
> +/* Helper Functions */
> +
> +/* __rmnet_data_set_skb_proto() - Set skb->protocol field
> + * @skb: packet being modified
> + *
> + * Peek at the first byte of the packet and set the protocol. There
> is not
> + * good way to determine if a packet has a MAP header. As of writing
> this,
> + * the reserved bit in the MAP frame will prevent it from
> overlapping with
> + * IPv4/IPv6 frames. This could change in the future!
> + */
> +static inline void __rmnet_data_set_skb_proto(struct sk_buff *skb)
> +{
> + switch (skb->data[0] & 0xF0) {
> + case RMNET_DATA_IP_VERSION_4:
> + skb->protocol = htons(ETH_P_IP);
> + break;
> + case RMNET_DATA_IP_VERSION_6:
> + skb->protocol = htons(ETH_P_IPV6);
> + break;
> + default:
> + skb->protocol = htons(ETH_P_MAP);
> + break;
> + }
> +}
> +
> +#ifdef CONFIG_RMNET_DATA_DEBUG
> +/* rmnet_print_packet() - Print packet / diagnostics
> + * @skb: Packet to print
> + * @printlen: Number of bytes to print
> + * @dev: Name of interface
> + * @dir: Character representing direction (e.g.. 'r' for
> receive)
> + *
> + * This function prints out raw bytes in an SKB. Use of this will
> have major
> + * performance impacts and may even trigger watchdog resets if too
> much is being
> + * printed. Hence, this should always be compiled out unless
> absolutely needed.
> + */
> +void rmnet_print_packet(const struct sk_buff *skb, const char *dev,
> char dir)
> +{
> + char buffer[200];
> + unsigned int len, printlen;
> + int i, buffloc = 0;
> +
> + switch (dir) {
> + case 'r':
> + printlen = dump_pkt_rx;
> + break;
> +
> + case 't':
> + printlen = dump_pkt_tx;
> + break;
> +
> + default:
> + printlen = 0;
> + break;
> + }
> +
> + if (!printlen)
> + return;
> +
> + pr_err("[%s][%c] - PKT skb->len=%d skb->head=%pK skb-
> >data=%pK\n",
> + dev, dir, skb->len, (void *)skb->head, (void *)skb-
> >data);
> + pr_err("[%s][%c] - PKT skb->tail=%pK skb->end=%pK\n",
> + dev, dir, skb_tail_pointer(skb),
> skb_end_pointer(skb));
> +
> + if (skb->len > 0)
> + len = skb->len;
> + else
> + len = ((unsigned int)(uintptr_t)skb->end) -
> + ((unsigned int)(uintptr_t)skb->data);
> +
> + pr_err("[%s][%c] - PKT len: %d, printing first %d bytes\n",
> + dev, dir, len, printlen);
> +
> + memset(buffer, 0, sizeof(buffer));
> + for (i = 0; (i < printlen) && (i < len); i++) {
> + if ((i % 16) == 0) {
> + pr_err("[%s][%c] - PKT%s\n", dev, dir,
> buffer);
> + memset(buffer, 0, sizeof(buffer));
> + buffloc = 0;
> + buffloc += snprintf(&buffer[buffloc],
> + sizeof(buffer) - buffloc,
> "%04X:",
> + i);
> + }
> +
> + buffloc += snprintf(&buffer[buffloc], sizeof(buffer)
> - buffloc,
> + " %02x", skb->data[i]);
> + }
> + pr_err("[%s][%c] - PKT%s\n", dev, dir, buffer);
> +}
> +#else
> +void rmnet_print_packet(const struct sk_buff *skb, const char *dev,
> char dir)
> +{
> +}
> +#endif /* CONFIG_RMNET_DATA_DEBUG */
> +
> +/* Generic handler */
> +
> +/* rmnet_bridge_handler() - Bridge related functionality
> + *
> + * Return:
> + * - RX_HANDLER_CONSUMED in all cases
> + */
> +static rx_handler_result_t rmnet_bridge_handler
> + (struct sk_buff *skb, struct rmnet_logical_ep_conf_s *ep)
> +{
> + if (!ep->egress_dev) {
> + LOGD("Missing egress device for packet arriving on
> %s",
> + skb->dev->name);
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_BRDG_NO_EGRESS);
> + } else {
> + rmnet_egress_handler(skb, ep);
> + }
> +
> + return RX_HANDLER_CONSUMED;
> +}
> +
> +#ifdef NET_SKBUFF_DATA_USES_OFFSET
> +static void rmnet_reset_mac_header(struct sk_buff *skb)
> +{
> + skb->mac_header = 0;
> + skb->mac_len = 0;
> +}
> +#else
> +static void rmnet_reset_mac_header(struct sk_buff *skb)
> +{
> + skb->mac_header = skb->network_header;
> + skb->mac_len = 0;
> +}
> +#endif /*NET_SKBUFF_DATA_USES_OFFSET*/
> +
> +/* __rmnet_deliver_skb() - Deliver skb
> + *
> + * Determines where to deliver skb. Options are: consume by network
> stack,
> + * pass to bridge handler, or pass to virtual network device
> + *
> + * Return:
> + * - RX_HANDLER_CONSUMED if packet forwarded or dropped
> + * - RX_HANDLER_PASS if packet is to be consumed by network
> stack as-is
> + */
> +static rx_handler_result_t __rmnet_deliver_skb
> + (struct sk_buff *skb, struct rmnet_logical_ep_conf_s *ep)
> +{
> + trace___rmnet_deliver_skb(skb);
> + switch (ep->rmnet_mode) {
> + case RMNET_EPMODE_NONE:
> + return RX_HANDLER_PASS;
> +
> + case RMNET_EPMODE_BRIDGE:
> + return rmnet_bridge_handler(skb, ep);
> +
> + case RMNET_EPMODE_VND:
> + skb_reset_transport_header(skb);
> + skb_reset_network_header(skb);
> + switch (rmnet_vnd_rx_fixup(skb, skb->dev)) {
> + case RX_HANDLER_CONSUMED:
> + return RX_HANDLER_CONSUMED;
> +
> + case RX_HANDLER_PASS:
> + skb->pkt_type = PACKET_HOST;
> + rmnet_reset_mac_header(skb);
> + netif_receive_skb(skb);
> + return RX_HANDLER_CONSUMED;
> + }
> + return RX_HANDLER_PASS;
> +
> + default:
> + LOGD("Unknown ep mode %d", ep->rmnet_mode);
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_DELIVER_NO_EP);
> + return RX_HANDLER_CONSUMED;
> + }
> +}
> +
> +/* rmnet_ingress_deliver_packet() - Ingress handler for raw IP and
> bridged
> + * MAP packets.
> + * @skb: Packet needing a destination.
> + * @config: Physical end point configuration that the packet
> arrived on.
> + *
> + * Return:
> + * - RX_HANDLER_CONSUMED if packet forwarded/dropped
> + * - RX_HANDLER_PASS if packet should be passed up the stack by
> caller
> + */
> +static rx_handler_result_t rmnet_ingress_deliver_packet
> + (struct sk_buff *skb, struct rmnet_phys_ep_conf_s *config)
> +{
> + if (!config) {
> + LOGD("%s", "NULL physical EP provided");
> + kfree_skb(skb);
> + return RX_HANDLER_CONSUMED;
> + }
> +
> + if (!(config->local_ep.refcount)) {
> + LOGD("Packet on %s has no local endpoint
> configuration",
> + skb->dev->name);
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_IPINGRESS_NO_EP);
> + return RX_HANDLER_CONSUMED;
> + }
> +
> + skb->dev = config->local_ep.egress_dev;
> +
> + return __rmnet_deliver_skb(skb, &config->local_ep);
> +}
> +
> +/* MAP handler */
> +
> +/* _rmnet_map_ingress_handler() - Actual MAP ingress handler
> + * @skb: Packet being received
> + * @config: Physical endpoint configuration for the ingress
> device
> + *
> + * Most MAP ingress functions are processed here. Packets are
> processed
> + * individually; aggregated packets should use
> rmnet_map_ingress_handler()
> + *
> + * Return:
> + * - RX_HANDLER_CONSUMED if packet is dropped
> + * - result of __rmnet_deliver_skb() for all other cases
> + */
> +static rx_handler_result_t _rmnet_map_ingress_handler
> + (struct sk_buff *skb, struct rmnet_phys_ep_conf_s *config)
> +{
> + struct rmnet_logical_ep_conf_s *ep;
> + u8 mux_id;
> + u16 len;
> +
> + if (RMNET_MAP_GET_CD_BIT(skb)) {
> + if (config->ingress_data_format
> + & RMNET_INGRESS_FORMAT_MAP_COMMANDS)
> + return rmnet_map_command(skb, config);
> +
> + LOGM("MAP command packet on %s; %s", skb->dev->name,
> + "Not configured for MAP commands");
> + rmnet_kfree_skb(skb,
> + RMNET_STATS_SKBFREE_INGRESS_NOT_EXPE
> CT_MAPC);
> + return RX_HANDLER_CONSUMED;
> + }
> +
> + mux_id = RMNET_MAP_GET_MUX_ID(skb);
> + len = RMNET_MAP_GET_LENGTH(skb) - RMNET_MAP_GET_PAD(skb);
> +
> + if (mux_id >= RMNET_DATA_MAX_LOGICAL_EP) {
> + LOGD("Got packet on %s with bad mux id %d",
> + skb->dev->name, mux_id);
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_MAPINGRESS_BAD_MUX);
> + return RX_HANDLER_CONSUMED;
> + }
> +
> + ep = &config->muxed_ep[mux_id];
> +
> + if (!ep->refcount) {
> + LOGD("Packet on %s:%d; has no logical endpoint
> config",
> + skb->dev->name, mux_id);
> +
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_MAPINGRESS_MUX_NO_EP);
> + return RX_HANDLER_CONSUMED;
> + }
> +
> + if (config->ingress_data_format &
> RMNET_INGRESS_FORMAT_DEMUXING)
> + skb->dev = ep->egress_dev;
> +
> + /* Subtract MAP header */
> + skb_pull(skb, sizeof(struct rmnet_map_header_s));
> + skb_trim(skb, len);
> + __rmnet_data_set_skb_proto(skb);
> + return __rmnet_deliver_skb(skb, ep);
> +}
> +
> +/* rmnet_map_ingress_handler() - MAP ingress handler
> + * @skb: Packet being received
> + * @config: Physical endpoint configuration for the ingress
> device
> + *
> + * Called if and only if MAP is configured in the ingress device's
> ingress data
> + * format. Deaggregation is done here, actual MAP processing is done
> in
> + * _rmnet_map_ingress_handler().
> + *
> + * Return:
> + * - RX_HANDLER_CONSUMED for aggregated packets
> + * - RX_HANDLER_CONSUMED for dropped packets
> + * - result of _rmnet_map_ingress_handler() for all other cases
> + */
> +static rx_handler_result_t rmnet_map_ingress_handler
> + (struct sk_buff *skb, struct rmnet_phys_ep_conf_s *config)
> +{
> + struct sk_buff *skbn;
> + int rc, co = 0;
> +
> + if (config->ingress_data_format &
> RMNET_INGRESS_FORMAT_DEAGGREGATION) {
> + trace_rmnet_start_deaggregation(skb);
> + while ((skbn = rmnet_map_deaggregate(skb, config))
> != NULL) {
> + _rmnet_map_ingress_handler(skbn, config);
> + co++;
> + }
> + trace_rmnet_end_deaggregation(skb, co);
> + LOGD("De-aggregated %d packets", co);
> + rmnet_stats_deagg_pkts(co);
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_MAPINGRESS_AGGBUF);
> + rc = RX_HANDLER_CONSUMED;
> + } else {
> + rc = _rmnet_map_ingress_handler(skb, config);
> + }
> +
> + return rc;
> +}
> +
> +/* rmnet_map_egress_handler() - MAP egress handler
> + * @skb: Packet being sent
> + * @config: Physical endpoint configuration for the egress
> device
> + * @ep: logical endpoint configuration of the packet
> originator
> + * (e.g.. RmNet virtual network device)
> + * @orig_dev: The originator vnd device
> + *
> + * Called if and only if MAP is configured in the egress device's
> egress data
> + * format. Will expand skb if there is insufficient headroom for MAP
> protocol.
> + * Note: headroomexpansion will incur a performance penalty.
> + *
> + * Return:
> + * - 0 on success
> + * - 1 on failure
> + */
> +static int rmnet_map_egress_handler(struct sk_buff *skb,
> + struct rmnet_phys_ep_conf_s
> *config,
> + struct rmnet_logical_ep_conf_s
> *ep,
> + struct net_device *orig_dev)
> +{
> + int required_headroom, additional_header_length;
> + struct rmnet_map_header_s *map_header;
> +
> + additional_header_length = 0;
> + required_headroom = sizeof(struct rmnet_map_header_s);
> +
> + LOGD("headroom of %d bytes", required_headroom);
> +
> + if (skb_headroom(skb) < required_headroom) {
> + if (pskb_expand_head(skb, required_headroom, 0,
> GFP_KERNEL)) {
> + LOGD("Failed to add headroom of %d bytes",
> + required_headroom);
> + return RMNET_MAP_CONSUMED;
> + }
> + }
> +
> + map_header = rmnet_map_add_map_header
> + (skb, additional_header_length,
> RMNET_MAP_NO_PAD_BYTES);
> +
> + if (!map_header) {
> + LOGD("%s", "Failed to add MAP header to egress
> packet");
> + return RMNET_MAP_CONSUMED;
> + }
> +
> + if (config->egress_data_format & RMNET_EGRESS_FORMAT_MUXING)
> {
> + if (ep->mux_id == 0xff)
> + map_header->mux_id = 0;
> + else
> + map_header->mux_id = ep->mux_id;
> + }
> +
> + skb->protocol = htons(ETH_P_MAP);
> +
> + return RMNET_MAP_SUCCESS;
> +}
> +
> +/* Ingress / Egress Entry Points */
> +
> +/* rmnet_ingress_handler() - Ingress handler entry point
> + * @skb: Packet being received
> + *
> + * Processes packet as per ingress data format for receiving device.
> Logical
> + * endpoint is determined from packet inspection. Packet is then
> sent to the
> + * egress device listed in the logical endpoint configuration.
> + *
> + * Return:
> + * - RX_HANDLER_PASS if packet is not processed by handler
> (caller must
> + * deal with the packet)
> + * - RX_HANDLER_CONSUMED if packet is forwarded or processed by
> MAP
> + */
> +rx_handler_result_t rmnet_ingress_handler(struct sk_buff *skb)
> +{
> + struct rmnet_phys_ep_conf_s *config;
> + struct net_device *dev;
> + int rc;
> +
> + if (!skb)
> + return RX_HANDLER_CONSUMED;
> +
> + dev = skb->dev;
> + trace_rmnet_ingress_handler(skb);
> + rmnet_print_packet(skb, dev->name, 'r');
> +
> + config = (struct rmnet_phys_ep_conf_s *)
> + rcu_dereference(skb->dev->rx_handler_data);
> +
> + if (!config) {
> + LOGD("%s is not associated with rmnet_data", skb-
> >dev->name);
> + kfree_skb(skb);
> + return RX_HANDLER_CONSUMED;
> + }
> +
> + /* Sometimes devices operate in ethernet mode even thouth
> there is no
> + * ethernet header. This causes the skb->protocol to contain
> a bogus
> + * value and the skb->data pointer to be off by 14 bytes.
> Fix it if
> + * configured to do so
> + */
> + if (config->ingress_data_format &
> RMNET_INGRESS_FIX_ETHERNET) {
> + skb_push(skb, RMNET_ETHERNET_HEADER_LENGTH);
> + __rmnet_data_set_skb_proto(skb);
> + }
> +
> + if (config->ingress_data_format & RMNET_INGRESS_FORMAT_MAP)
> {
> + rc = rmnet_map_ingress_handler(skb, config);
> + } else {
> + switch (ntohs(skb->protocol)) {
> + case ETH_P_MAP:
> + if (config->local_ep.rmnet_mode ==
> + RMNET_EPMODE_BRIDGE) {
> + rc =
> rmnet_ingress_deliver_packet(skb, config);
> + } else {
> + LOGD("MAP packet on %s; MAP not
> set",
> + dev->name);
> + rmnet_kfree_skb
> + (skb,
> + RMNET_STATS_SKBFREE_INGRESS_NOT_EXP
> ECT_MAPD);
> + rc = RX_HANDLER_CONSUMED;
> + }
> + break;
> +
> + case ETH_P_ARP:
> + case ETH_P_IP:
> + case ETH_P_IPV6:
> + rc = rmnet_ingress_deliver_packet(skb,
> config);
> + break;
> +
> + default:
> + LOGD("Unknown skb->proto 0x%04X\n",
> + ntohs(skb->protocol) & 0xFFFF);
> + rc = RX_HANDLER_PASS;
> + }
> + }
> +
> + return rc;
> +}
> +
> +/* rmnet_rx_handler() - Rx handler callback registered with kernel
> + * @pskb: Packet to be processed by rx handler
> + *
> + * Standard kernel-expected footprint for rx handlers. Calls
> + * rmnet_ingress_handler with correctly formatted arguments
> + *
> + * Return:
> + * - Whatever rmnet_ingress_handler() returns
> + */
> +rx_handler_result_t rmnet_rx_handler(struct sk_buff **pskb)
> +{
> + return rmnet_ingress_handler(*pskb);
> +}
> +
> +/* rmnet_egress_handler() - Egress handler entry point
> + * @skb: packet to transmit
> + * @ep: logical endpoint configuration of the packet
> originator
> + * (e.g.. RmNet virtual network device)
> + *
> + * Modifies packet as per logical endpoint configuration and egress
> data format
> + * for egress device configured in logical endpoint. Packet is then
> transmitted
> + * on the egress device.
> + */
> +void rmnet_egress_handler(struct sk_buff *skb,
> + struct rmnet_logical_ep_conf_s *ep)
> +{
> + struct rmnet_phys_ep_conf_s *config;
> + struct net_device *orig_dev;
> + int rc;
> +
> + orig_dev = skb->dev;
> + skb->dev = ep->egress_dev;
> +
> + config = (struct rmnet_phys_ep_conf_s *)
> + rcu_dereference(skb->dev->rx_handler_data);
> +
> + if (!config) {
> + LOGD("%s is not associated with rmnet_data", skb-
> >dev->name);
> + kfree_skb(skb);
> + return;
> + }
> +
> + LOGD("Packet going out on %s with egress format 0x%08X",
> + skb->dev->name, config->egress_data_format);
> +
> + if (config->egress_data_format & RMNET_EGRESS_FORMAT_MAP) {
> + switch (rmnet_map_egress_handler(skb, config, ep,
> orig_dev)) {
> + case RMNET_MAP_CONSUMED:
> + LOGD("%s", "MAP process consumed packet");
> + return;
> +
> + case RMNET_MAP_SUCCESS:
> + break;
> +
> + default:
> + LOGD("MAP egress failed on packet on %s",
> + skb->dev->name);
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_EGR_MAPFAIL);
> + return;
> + }
> + }
> +
> + if (ep->rmnet_mode == RMNET_EPMODE_VND)
> + rmnet_vnd_tx_fixup(skb, orig_dev);
> +
> + rmnet_print_packet(skb, skb->dev->name, 't');
> + trace_rmnet_egress_handler(skb);
> + rc = dev_queue_xmit(skb);
> + if (rc != 0) {
> + LOGD("Failed to queue packet for transmission on
> [%s]",
> + skb->dev->name);
> + }
> + rmnet_stats_queue_xmit(rc, RMNET_STATS_QUEUE_XMIT_EGRESS);
> +}
> diff --git a/net/rmnet_data/rmnet_data_handlers.h
> b/net/rmnet_data/rmnet_data_handlers.h
> new file mode 100644
> index 0000000..85a590c
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_handlers.h
> @@ -0,0 +1,24 @@
> +/* Copyright (c) 2013, 2016-2017 The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * RMNET Data ingress/egress handler
> + *
> + */
> +
> +#ifndef _RMNET_DATA_HANDLERS_H_
> +#define _RMNET_DATA_HANDLERS_H_
> +
> +void rmnet_egress_handler(struct sk_buff *skb,
> + struct rmnet_logical_ep_conf_s *ep);
> +
> +rx_handler_result_t rmnet_rx_handler(struct sk_buff **pskb);
> +
> +#endif /* _RMNET_DATA_HANDLERS_H_ */
> diff --git a/net/rmnet_data/rmnet_data_main.c
> b/net/rmnet_data/rmnet_data_main.c
> new file mode 100644
> index 0000000..f0e1ec6
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_main.c
> @@ -0,0 +1,60 @@
> +/* Copyright (c) 2013-2014, 2016-2017 The Linux Foundation. All
> rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + *
> + * RMNET Data generic framework
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/export.h>
> +#include "rmnet_data_private.h"
> +#include "rmnet_data_config.h"
> +#include "rmnet_data_vnd.h"
> +
> +/* Trace Points */
> +#define CREATE_TRACE_POINTS
> +#include "rmnet_data_trace.h"
> +
> +/* Module Parameters */
> +unsigned int rmnet_data_log_level = RMNET_LOG_LVL_ERR |
> RMNET_LOG_LVL_HI;
> +module_param(rmnet_data_log_level, uint, 0644);
> +MODULE_PARM_DESC(log_level, "Logging level");
> +
> +unsigned int rmnet_data_log_module_mask;
> +module_param(rmnet_data_log_module_mask, uint, 0644);
> +MODULE_PARM_DESC(rmnet_data_log_module_mask, "Logging module mask");
> +
> +/* Startup/Shutdown */
> +
> +/* rmnet_init() - Module initialization
> + *
> + * todo: check for (and init) startup errors
> + */
> +static int __init rmnet_init(void)
> +{
> + rmnet_config_init();
> + rmnet_vnd_init();
> +
> + LOGL("%s", "RMNET Data driver loaded successfully");
> + return 0;
> +}
> +
> +static void __exit rmnet_exit(void)
> +{
> + rmnet_config_exit();
> + rmnet_vnd_exit();
> +}
> +
> +module_init(rmnet_init)
> +module_exit(rmnet_exit)
> +MODULE_LICENSE("GPL v2");
> diff --git a/net/rmnet_data/rmnet_data_private.h
> b/net/rmnet_data/rmnet_data_private.h
> new file mode 100644
> index 0000000..1dfddc1
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_private.h
> @@ -0,0 +1,76 @@
> +/* Copyright (c) 2013-2014, 2016-2017 The Linux Foundation. All
> rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef _RMNET_DATA_PRIVATE_H_
> +#define _RMNET_DATA_PRIVATE_H_
> +
> +#define RMNET_DATA_MAX_VND 32
> +#define RMNET_DATA_MAX_PACKET_SIZE 16384
> +#define RMNET_DATA_DFLT_PACKET_SIZE 1500
> +#define RMNET_DATA_DEV_NAME_STR "rmnet_data"
> +#define RMNET_DATA_NEEDED_HEADROOM 16
> +#define RMNET_DATA_TX_QUEUE_LEN 1000
> +#define RMNET_ETHERNET_HEADER_LENGTH 14
> +
> +extern unsigned int rmnet_data_log_level;
> +extern unsigned int rmnet_data_log_module_mask;
> +
> +#define RMNET_INIT_OK 0
> +#define RMNET_INIT_ERROR 1
> +
> +#define RMNET_LOG_LVL_DBG BIT(4)
> +#define RMNET_LOG_LVL_LOW BIT(3)
> +#define RMNET_LOG_LVL_MED BIT(2)
> +#define RMNET_LOG_LVL_HI BIT(1)
> +#define RMNET_LOG_LVL_ERR BIT(0)
> +
> +#define RMNET_LOG_MODULE(X) \
> + static u32 rmnet_mod_mask = X
> +
> +#define RMNET_DATA_LOGMASK_CONFIG BIT(0)
> +#define RMNET_DATA_LOGMASK_HANDLER BIT(1)
> +#define RMNET_DATA_LOGMASK_VND BIT(2)
> +#define RMNET_DATA_LOGMASK_MAPD BIT(3)
> +#define RMNET_DATA_LOGMASK_MAPC BIT(4)
> +
> +#define LOGE(fmt, ...) do { if (rmnet_data_log_level &
> RMNET_LOG_LVL_ERR) \
> + pr_err("[RMNET:ERR] %s(): " fmt "\n",
> __func__, \
> + ##__VA_ARGS__); \
> + } while (0)
> +
> +#define LOGH(fmt, ...) do { if (rmnet_data_log_level &
> RMNET_LOG_LVL_HI) \
> + pr_err("[RMNET:HI] %s(): " fmt "\n",
> __func__, \
> + ##__VA_ARGS__); \
> + } while (0)
> +
> +#define LOGM(fmt, ...) do { if (rmnet_data_log_level &
> RMNET_LOG_LVL_MED) \
> + pr_warn("[RMNET:MED] %s(): " fmt "\n",
> __func__, \
> + ##__VA_ARGS__); \
> + } while (0)
> +
> +#define LOGL(fmt, ...) do { if (unlikely \
> + (rmnet_data_log_level & RMNET_LOG_LVL_LOW))
> \
> + pr_notice("[RMNET:LOW] %s(): " fmt "\n",
> __func__, \
> + ##__VA_ARGS__); \
> + } while (0)
> +
> +/* Don't use pr_debug as it is compiled out of the kernel. We can be
> sure of
> + * minimal impact as LOGD is not enabled by default.
> + */
> +#define LOGD(fmt, ...) do { if (unlikely( \
> + (rmnet_data_log_level &
> RMNET_LOG_LVL_DBG) &&\
> + (rmnet_data_log_module_mask &
> rmnet_mod_mask))) \
> + pr_notice("[RMNET:DBG] %s(): " fmt "\n",
> __func__, \
> + ##__VA_ARGS__); \
> + } while (0)
> +
> +#endif /* _RMNET_DATA_PRIVATE_H_ */
> diff --git a/net/rmnet_data/rmnet_data_stats.c
> b/net/rmnet_data/rmnet_data_stats.c
> new file mode 100644
> index 0000000..4bf7a72
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_stats.c
> @@ -0,0 +1,86 @@
> +/* Copyright (c) 2014, 2016-2017 The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + *
> + * RMNET Data statistics
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/export.h>
> +#include <linux/skbuff.h>
> +#include <linux/spinlock.h>
> +#include <linux/netdevice.h>
> +#include "rmnet_data_private.h"
> +#include "rmnet_data_stats.h"
> +#include "rmnet_data_config.h"
> +#include "rmnet_map.h"
> +
> +enum rmnet_deagg_e {
> + RMNET_STATS_AGG_BUFF,
> + RMNET_STATS_AGG_PKT,
> + RMNET_STATS_AGG_MAX
> +};
> +
> +static DEFINE_SPINLOCK(rmnet_skb_free_lock);
> +unsigned long int skb_free[RMNET_STATS_SKBFREE_MAX];
> +module_param_array(skb_free, ulong, 0, 0444);
> +MODULE_PARM_DESC(skb_free, "SKBs dropped or freed");
> +
> +static DEFINE_SPINLOCK(rmnet_queue_xmit_lock);
> +unsigned long int queue_xmit[RMNET_STATS_QUEUE_XMIT_MAX * 2];
> +module_param_array(queue_xmit, ulong, 0, 0444);
> +MODULE_PARM_DESC(queue_xmit, "SKBs queued for transmit");
> +
> +static DEFINE_SPINLOCK(rmnet_deagg_count);
> +unsigned long int deagg_count[RMNET_STATS_AGG_MAX];
> +module_param_array(deagg_count, ulong, 0, 0444);
> +MODULE_PARM_DESC(deagg_count, "SKBs De-aggregated");
> +
> +void rmnet_kfree_skb(struct sk_buff *skb, unsigned int reason)
> +{
> + unsigned long flags;
> +
> + if (reason >= RMNET_STATS_SKBFREE_MAX)
> + reason = RMNET_STATS_SKBFREE_UNKNOWN;
> +
> + spin_lock_irqsave(&rmnet_skb_free_lock, flags);
> + skb_free[reason]++;
> + spin_unlock_irqrestore(&rmnet_skb_free_lock, flags);
> +
> + if (skb)
> + kfree_skb(skb);
> +}
> +
> +void rmnet_stats_queue_xmit(int rc, unsigned int reason)
> +{
> + unsigned long flags;
> +
> + if (rc != 0)
> + reason += RMNET_STATS_QUEUE_XMIT_MAX;
> + if (reason >= RMNET_STATS_QUEUE_XMIT_MAX * 2)
> + reason = RMNET_STATS_SKBFREE_UNKNOWN;
> +
> + spin_lock_irqsave(&rmnet_queue_xmit_lock, flags);
> + queue_xmit[reason]++;
> + spin_unlock_irqrestore(&rmnet_queue_xmit_lock, flags);
> +}
> +
> +void rmnet_stats_deagg_pkts(int aggcount)
> +{
> + unsigned long flags;
> +
> + spin_lock_irqsave(&rmnet_deagg_count, flags);
> + deagg_count[RMNET_STATS_AGG_BUFF]++;
> + deagg_count[RMNET_STATS_AGG_PKT] += aggcount;
> + spin_unlock_irqrestore(&rmnet_deagg_count, flags);
> +}
> diff --git a/net/rmnet_data/rmnet_data_stats.h
> b/net/rmnet_data/rmnet_data_stats.h
> new file mode 100644
> index 0000000..a6f73a2
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_stats.h
> @@ -0,0 +1,61 @@
> +/* Copyright (c) 2014, 2016-2017 The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + *
> + * RMNET Data statistics
> + *
> + */
> +
> +#ifndef _RMNET_DATA_STATS_H_
> +#define _RMNET_DATA_STATS_H_
> +
> +enum rmnet_skb_free_e {
> + RMNET_STATS_SKBFREE_UNKNOWN,
> + RMNET_STATS_SKBFREE_BRDG_NO_EGRESS,
> + RMNET_STATS_SKBFREE_DELIVER_NO_EP,
> + RMNET_STATS_SKBFREE_IPINGRESS_NO_EP,
> + RMNET_STATS_SKBFREE_MAPINGRESS_BAD_MUX,
> + RMNET_STATS_SKBFREE_MAPINGRESS_MUX_NO_EP,
> + RMNET_STATS_SKBFREE_MAPINGRESS_AGGBUF,
> + RMNET_STATS_SKBFREE_INGRESS_NOT_EXPECT_MAPD,
> + RMNET_STATS_SKBFREE_INGRESS_NOT_EXPECT_MAPC,
> + RMNET_STATS_SKBFREE_EGR_MAPFAIL,
> + RMNET_STATS_SKBFREE_VND_NO_EGRESS,
> + RMNET_STATS_SKBFREE_MAPC_BAD_MUX,
> + RMNET_STATS_SKBFREE_MAPC_MUX_NO_EP,
> + RMNET_STATS_SKBFREE_AGG_CPY_EXPAND,
> + RMNET_STATS_SKBFREE_AGG_INTO_BUFF,
> + RMNET_STATS_SKBFREE_DEAGG_MALFORMED,
> + RMNET_STATS_SKBFREE_DEAGG_CLONE_FAIL,
> + RMNET_STATS_SKBFREE_DEAGG_UNKNOWN_IP_TYPE,
> + RMNET_STATS_SKBFREE_DEAGG_DATA_LEN_0,
> + RMNET_STATS_SKBFREE_INGRESS_BAD_MAP_CKSUM,
> + RMNET_STATS_SKBFREE_MAPC_UNSUPPORTED,
> + RMNET_STATS_SKBFREE_MAX
> +};
> +
> +enum rmnet_queue_xmit_e {
> + RMNET_STATS_QUEUE_XMIT_UNKNOWN,
> + RMNET_STATS_QUEUE_XMIT_EGRESS,
> + RMNET_STATS_QUEUE_XMIT_AGG_FILL_BUFFER,
> + RMNET_STATS_QUEUE_XMIT_AGG_TIMEOUT,
> + RMNET_STATS_QUEUE_XMIT_AGG_CPY_EXP_FAIL,
> + RMNET_STATS_QUEUE_XMIT_AGG_SKIP,
> + RMNET_STATS_QUEUE_XMIT_MAX
> +};
> +
> +void rmnet_kfree_skb(struct sk_buff *skb, unsigned int reason);
> +void rmnet_stats_queue_xmit(int rc, unsigned int reason);
> +void rmnet_stats_deagg_pkts(int aggcount);
> +void rmnet_stats_agg_pkts(int aggcount);
> +void rmnet_stats_dl_checksum(unsigned int rc);
> +void rmnet_stats_ul_checksum(unsigned int rc);
> +#endif /* _RMNET_DATA_STATS_H_ */
> diff --git a/net/rmnet_data/rmnet_data_trace.h
> b/net/rmnet_data/rmnet_data_trace.h
> new file mode 100644
> index 0000000..264ff61
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_trace.h
> @@ -0,0 +1,198 @@
> +/* Copyright (c) 2014-2017, The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#undef TRACE_SYSTEM
> +#define TRACE_SYSTEM rmnet_data
> +#define TRACE_INCLUDE_FILE rmnet_data_trace
> +
> +#if !defined(_RMNET_DATA_TRACE_H_) ||
> defined(TRACE_HEADER_MULTI_READ)
> +#define _RMNET_DATA_TRACE_H_
> +
> +#include <linux/netdevice.h>
> +#include <linux/skbuff.h>
> +#include <linux/tracepoint.h>
> +
> +DECLARE_EVENT_CLASS
> + (rmnet_handler_template,
> +
> + TP_PROTO(struct sk_buff *skb),
> +
> + TP_ARGS(skb),
> +
> + TP_STRUCT__entry(
> + __field(void *, skbaddr)
> + __field(unsigned int, len)
> + __string(name, skb->dev->name)
> + ),
> +
> + TP_fast_assign(
> + __entry->skbaddr = skb;
> + __entry->len = skb->len;
> + __assign_str(name, skb->dev->name);
> + ),
> +
> + TP_printk("dev=%s skbaddr=%pK len=%u",
> + __get_str(name), __entry->skbaddr, __entry->len)
> +)
> +
> +DEFINE_EVENT
> + (rmnet_handler_template, rmnet_egress_handler,
> +
> + TP_PROTO(struct sk_buff *skb),
> +
> + TP_ARGS(skb)
> +);
> +
> +DEFINE_EVENT
> + (rmnet_handler_template, rmnet_ingress_handler,
> +
> + TP_PROTO(struct sk_buff *skb),
> +
> + TP_ARGS(skb)
> +);
> +
> +DEFINE_EVENT
> + (rmnet_handler_template, rmnet_vnd_start_xmit,
> +
> + TP_PROTO(struct sk_buff *skb),
> +
> + TP_ARGS(skb)
> +);
> +
> +DEFINE_EVENT
> + (rmnet_handler_template, __rmnet_deliver_skb,
> +
> + TP_PROTO(struct sk_buff *skb),
> +
> + TP_ARGS(skb)
> +);
> +
> +TRACE_EVENT
> + (rmnet_start_deaggregation,
> +
> + TP_PROTO(struct sk_buff *skb),
> +
> + TP_ARGS(skb),
> +
> + TP_STRUCT__entry(
> + __string(name, skb->dev->name)
> + ),
> +
> + TP_fast_assign(
> + __assign_str(name, skb->dev->name);
> + ),
> +
> + TP_printk("dev: %s, deaggregated first packet",
> __get_str(name))
> +)
> +
> +TRACE_EVENT
> + (rmnet_end_deaggregation,
> +
> + TP_PROTO(struct sk_buff *skb, int num_deagg_packets),
> +
> + TP_ARGS(skb, num_deagg_packets),
> +
> + TP_STRUCT__entry(
> + __string(name, skb->dev->name)
> + __field(int, num)
> + ),
> +
> + TP_fast_assign(
> + __assign_str(name, skb->dev->name);
> + __entry->num = num_deagg_packets;
> + ),
> +
> + TP_printk("dev: %s, deaggregate end count: %d",
> + __get_str(name), __entry->num)
> +)
> +
> +DECLARE_EVENT_CLASS
> + (rmnet_physdev_action_template,
> +
> + TP_PROTO(struct net_device *dev),
> +
> + TP_ARGS(dev),
> +
> + TP_STRUCT__entry(
> + __string(name, dev->name)
> + ),
> +
> + TP_fast_assign(
> + __assign_str(name, dev->name);
> + ),
> +
> + TP_printk("Physical dev=%s", __get_str(name))
> +)
> +
> +DEFINE_EVENT
> + (rmnet_physdev_action_template,
> rmnet_unregister_cb_unhandled,
> +
> + TP_PROTO(struct net_device *dev),
> +
> + TP_ARGS(dev)
> +);
> +
> +DEFINE_EVENT
> + (rmnet_physdev_action_template, rmnet_unregister_cb_entry,
> +
> + TP_PROTO(struct net_device *dev),
> +
> + TP_ARGS(dev)
> +);
> +
> +DEFINE_EVENT
> + (rmnet_physdev_action_template, rmnet_unregister_cb_exit,
> +
> + TP_PROTO(struct net_device *dev),
> +
> + TP_ARGS(dev)
> +);
> +
> +DEFINE_EVENT
> + (rmnet_physdev_action_template,
> rmnet_unregister_cb_clear_vnds,
> +
> + TP_PROTO(struct net_device *dev),
> +
> + TP_ARGS(dev)
> +);
> +
> +DEFINE_EVENT
> + (rmnet_physdev_action_template,
> rmnet_unregister_cb_clear_lepcs,
> +
> + TP_PROTO(struct net_device *dev),
> +
> + TP_ARGS(dev)
> +);
> +
> +DEFINE_EVENT
> + (rmnet_physdev_action_template, rmnet_associate,
> +
> + TP_PROTO(struct net_device *dev),
> +
> + TP_ARGS(dev)
> +);
> +
> +DEFINE_EVENT
> + (rmnet_physdev_action_template, rmnet_unassociate,
> +
> + TP_PROTO(struct net_device *dev),
> +
> + TP_ARGS(dev)
> +);
> +
> +#endif /* _RMNET_DATA_TRACE_H_ */
> +
> +/* This part must be outside protection */
> +#undef TRACE_INCLUDE_PATH
> +#define TRACE_INCLUDE_PATH .
> +#include <trace/define_trace.h>
> +
> diff --git a/net/rmnet_data/rmnet_data_vnd.c
> b/net/rmnet_data/rmnet_data_vnd.c
> new file mode 100644
> index 0000000..d48dc23
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_vnd.c
> @@ -0,0 +1,460 @@
> +/* Copyright (c) 2013-2017, The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + *
> + * RMNET Data virtual network driver
> + *
> + */
> +
> +#include <linux/types.h>
> +#include <linux/rmnet_data.h>
> +#include <linux/etherdevice.h>
> +#include <linux/if_arp.h>
> +#include <linux/spinlock.h>
> +#include <net/pkt_sched.h>
> +#include <linux/atomic.h>
> +#include "rmnet_data_config.h"
> +#include "rmnet_data_handlers.h"
> +#include "rmnet_data_private.h"
> +#include "rmnet_map.h"
> +#include "rmnet_data_vnd.h"
> +#include "rmnet_data_stats.h"
> +#include "rmnet_data_trace.h"
> +
> +RMNET_LOG_MODULE(RMNET_DATA_LOGMASK_VND);
> +
> +struct net_device *rmnet_devices[RMNET_DATA_MAX_VND];
> +
> +struct rmnet_vnd_private_s {
> + struct rmnet_logical_ep_conf_s local_ep;
> +};
> +
> +/* RX/TX Fixup */
> +
> +/* rmnet_vnd_rx_fixup() - Virtual Network Device receive fixup hook
> + * @skb: Socket buffer ("packet") to modify
> + * @dev: Virtual network device
> + *
> + * Additional VND specific packet processing for ingress packets
> + *
> + * Return:
> + * - RX_HANDLER_PASS if packet should continue to process in
> stack
> + * - RX_HANDLER_CONSUMED if packet should not be processed in
> stack
> + *
> + */
> +int rmnet_vnd_rx_fixup(struct sk_buff *skb, struct net_device *dev)
> +{
> + if (unlikely(!dev || !skb))
> + return RX_HANDLER_CONSUMED;
> +
> + dev->stats.rx_packets++;
> + dev->stats.rx_bytes += skb->len;
> +
> + return RX_HANDLER_PASS;
> +}
> +
> +/* rmnet_vnd_tx_fixup() - Virtual Network Device transmic fixup hook
> + * @skb: Socket buffer ("packet") to modify
> + * @dev: Virtual network device
> + *
> + * Additional VND specific packet processing for egress packets
> + *
> + * Return:
> + * - RX_HANDLER_PASS if packet should continue to be
> transmitted
> + * - RX_HANDLER_CONSUMED if packet should not be transmitted by
> stack
> + */
> +int rmnet_vnd_tx_fixup(struct sk_buff *skb, struct net_device *dev)
> +{
> + struct rmnet_vnd_private_s *dev_conf;
> +
> + dev_conf = (struct rmnet_vnd_private_s *)netdev_priv(dev);
> +
> + if (unlikely(!dev || !skb))
> + return RX_HANDLER_CONSUMED;
> +
> + dev->stats.tx_packets++;
> + dev->stats.tx_bytes += skb->len;
> +
> + return RX_HANDLER_PASS;
> +}
> +
> +/* Network Device Operations */
> +
> +/* rmnet_vnd_start_xmit() - Transmit NDO callback
> + * @skb: Socket buffer ("packet") being sent from network
> stack
> + * @dev: Virtual Network Device
> + *
> + * Standard network driver operations hook to transmit packets on
> virtual
> + * network device. Called by network stack. Packet is not
> transmitted directly
> + * from here; instead it is given to the rmnet egress handler.
> + *
> + * Return:
> + * - NETDEV_TX_OK under all cirumstances (cannot block/fail)
> + */
> +static netdev_tx_t rmnet_vnd_start_xmit(struct sk_buff *skb,
> + struct net_device *dev)
> +{
> + struct rmnet_vnd_private_s *dev_conf;
> +
> + trace_rmnet_vnd_start_xmit(skb);
> + dev_conf = (struct rmnet_vnd_private_s *)netdev_priv(dev);
> + if (dev_conf->local_ep.egress_dev) {
> + rmnet_egress_handler(skb, &dev_conf->local_ep);
> + } else {
> + dev->stats.tx_dropped++;
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_VND_NO_EGRESS);
> + }
> + return NETDEV_TX_OK;
> +}
> +
> +/* rmnet_vnd_change_mtu() - Change MTU NDO callback
> + * @dev: Virtual network device
> + * @new_mtu: New MTU value to set (in bytes)
> + *
> + * Standard network driver operations hook to set the MTU. Called by
> kernel to
> + * set the device MTU. Checks if desired MTU is less than zero or
> greater than
> + * RMNET_DATA_MAX_PACKET_SIZE;
> + *
> + * Return:
> + * - 0 if successful
> + * - -EINVAL if new_mtu is out of range
> + */
> +static int rmnet_vnd_change_mtu(struct net_device *dev, int new_mtu)
> +{
> + if (new_mtu < 0 || new_mtu > RMNET_DATA_MAX_PACKET_SIZE)
> + return -EINVAL;
> +
> + dev->mtu = new_mtu;
> + return 0;
> +}
> +
> +static const struct net_device_ops rmnet_data_vnd_ops = {
> + .ndo_init = 0,
> + .ndo_start_xmit = rmnet_vnd_start_xmit,
> + .ndo_change_mtu = rmnet_vnd_change_mtu,
> + .ndo_set_mac_address = 0,
> + .ndo_validate_addr = 0,
> +};
> +
> +/* rmnet_vnd_setup() - net_device initialization callback
> + * @dev: Virtual network device
> + *
> + * Called by kernel whenever a new rmnet_data<n> device is created.
> Sets MTU,
> + * flags, ARP type, needed headroom, etc...
> + */
> +static void rmnet_vnd_setup(struct net_device *dev)
> +{
> + struct rmnet_vnd_private_s *dev_conf;
> +
> + LOGM("Setting up device %s", dev->name);
> +
> + /* Clear out private data */
> + dev_conf = (struct rmnet_vnd_private_s *)netdev_priv(dev);
> + memset(dev_conf, 0, sizeof(struct rmnet_vnd_private_s));
> +
> + dev->netdev_ops = &rmnet_data_vnd_ops;
> + dev->mtu = RMNET_DATA_DFLT_PACKET_SIZE;
> + dev->needed_headroom = RMNET_DATA_NEEDED_HEADROOM;
> + random_ether_addr(dev->dev_addr);
> + dev->tx_queue_len = RMNET_DATA_TX_QUEUE_LEN;
> +
> + /* Raw IP mode */
> + dev->header_ops = 0; /* No header */
> + dev->type = ARPHRD_RAWIP;
> + dev->hard_header_len = 0;
> + dev->flags &= ~(IFF_BROADCAST | IFF_MULTICAST);
> +}
> +
> +/* Exposed API */
> +
> +/* rmnet_vnd_exit() - Shutdown cleanup hook
> + *
> + * Called by RmNet main on module unload. Cleans up data structures
> and
> + * unregisters/frees net_devices.
> + */
> +void rmnet_vnd_exit(void)
> +{
> + int i;
> +
> + for (i = 0; i < RMNET_DATA_MAX_VND; i++)
> + if (rmnet_devices[i]) {
> + unregister_netdev(rmnet_devices[i]);
> + free_netdev(rmnet_devices[i]);
> + }
> +}
> +
> +/* rmnet_vnd_init() - Init hook
> + *
> + * Called by RmNet main on module load. Initializes data structures
> + */
> +int rmnet_vnd_init(void)
> +{
> + memset(rmnet_devices, 0,
> + sizeof(struct net_device *) * RMNET_DATA_MAX_VND);
> + return 0;
> +}
> +
> +/* rmnet_vnd_create_dev() - Create a new virtual network device
> node.
> + * @id: Virtual device node id
> + * @new_device: Pointer to newly created device node
> + * @prefix: Device name prefix
> + *
> + * Allocates structures for new virtual network devices. Sets the
> name of the
> + * new device and registers it with the network stack. Device will
> appear in
> + * ifconfig list after this is called. If the prefix is null, then
> + * RMNET_DATA_DEV_NAME_STR will be assumed.
> + *
> + * Return:
> + * - 0 if successful
> + * - RMNET_CONFIG_BAD_ARGUMENTS if id is out of range or prefix
> is too long
> + * - RMNET_CONFIG_DEVICE_IN_USE if id already in use
> + * - RMNET_CONFIG_NOMEM if net_device allocation failed
> + * - RMNET_CONFIG_UNKNOWN_ERROR if register_netdevice() fails
> + */
> +int rmnet_vnd_create_dev(int id, struct net_device **new_device,
> + const char *prefix)
> +{
> + struct net_device *dev;
> + char dev_prefix[IFNAMSIZ];
> + int p, rc = 0;
> +
> + if (id < 0 || id >= RMNET_DATA_MAX_VND) {
> + *new_device = 0;
> + return RMNET_CONFIG_BAD_ARGUMENTS;
> + }
> +
> + if (rmnet_devices[id]) {
> + *new_device = 0;
> + return RMNET_CONFIG_DEVICE_IN_USE;
> + }
> +
> + if (!prefix)
> + p = scnprintf(dev_prefix, IFNAMSIZ, "%s%%d",
> + RMNET_DATA_DEV_NAME_STR);
> + else
> + p = scnprintf(dev_prefix, IFNAMSIZ, "%s%%d",
> prefix);
> + if (p >= (IFNAMSIZ - 1)) {
> + LOGE("Specified prefix longer than IFNAMSIZ");
> + return RMNET_CONFIG_BAD_ARGUMENTS;
> + }
> +
> + dev = alloc_netdev(sizeof(struct rmnet_vnd_private_s),
> + dev_prefix,
> + NET_NAME_ENUM,
> + rmnet_vnd_setup);
> + if (!dev) {
> + LOGE("Failed to to allocate netdev for id %d", id);
> + *new_device = 0;
> + return RMNET_CONFIG_NOMEM;
> + }
> +
> + rc = register_netdevice(dev);
> + if (rc != 0) {
> + LOGE("Failed to to register netdev [%s]", dev-
> >name);
> + free_netdev(dev);
> + *new_device = 0;
> + rc = RMNET_CONFIG_UNKNOWN_ERROR;
> + } else {
> + rmnet_devices[id] = dev;
> + *new_device = dev;
> + LOGM("Registered device %s", dev->name);
> + }
> +
> + return rc;
> +}
> +
> +/* rmnet_vnd_free_dev() - free a virtual network device node.
> + * @id: Virtual device node id
> + *
> + * Unregisters the virtual network device node and frees it.
> + * unregister_netdev locks the rtnl mutex, so the mutex must not be
> locked
> + * by the caller of the function. unregister_netdev enqueues the
> request to
> + * unregister the device into a TODO queue. The requests in the TODO
> queue
> + * are only done after rtnl mutex is unlocked, therefore free_netdev
> has to
> + * called after unlocking rtnl mutex.
> + *
> + * Return:
> + * - 0 if successful
> + * - RMNET_CONFIG_NO_SUCH_DEVICE if id is invalid or not in
> range
> + * - RMNET_CONFIG_DEVICE_IN_USE if device has logical ep that
> wasn't unset
> + */
> +int rmnet_vnd_free_dev(int id)
> +{
> + struct rmnet_logical_ep_conf_s *epconfig_l;
> + struct net_device *dev;
> +
> + rtnl_lock();
> + if ((id < 0) || (id >= RMNET_DATA_MAX_VND) ||
> !rmnet_devices[id]) {
> + rtnl_unlock();
> + LOGM("Invalid id [%d]", id);
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> + }
> +
> + epconfig_l = rmnet_vnd_get_le_config(rmnet_devices[id]);
> + if (epconfig_l && epconfig_l->refcount) {
> + rtnl_unlock();
> + return RMNET_CONFIG_DEVICE_IN_USE;
> + }
> +
> + dev = rmnet_devices[id];
> + rmnet_devices[id] = 0;
> + rtnl_unlock();
> +
> + if (dev) {
> + unregister_netdev(dev);
> + free_netdev(dev);
> + return 0;
> + } else {
> + return RMNET_CONFIG_NO_SUCH_DEVICE;
> + }
> +}
> +
> +/* rmnet_vnd_get_name() - Gets the string name of a VND based on ID
> + * @id: Virtual device node id
> + * @name: Buffer to store name of virtual device node
> + * @name_len: Length of name buffer
> + *
> + * Copies the name of the virtual device node into the users buffer.
> Will throw
> + * an error if the buffer is null, or too small to hold the device
> name.
> + *
> + * Return:
> + * - 0 if successful
> + * - -EINVAL if name is null
> + * - -EINVAL if id is invalid or not in range
> + * - -EINVAL if name is too small to hold things
> + */
> +int rmnet_vnd_get_name(int id, char *name, int name_len)
> +{
> + int p;
> +
> + if (!name) {
> + LOGM("%s", "Bad arguments; name buffer null");
> + return -EINVAL;
> + }
> +
> + if ((id < 0) || (id >= RMNET_DATA_MAX_VND) ||
> !rmnet_devices[id]) {
> + LOGM("Invalid id [%d]", id);
> + return -EINVAL;
> + }
> +
> + p = strlcpy(name, rmnet_devices[id]->name, name_len);
> + if (p >= name_len) {
> + LOGM("Buffer to small (%d) to fit device name",
> name_len);
> + return -EINVAL;
> + }
> + LOGL("Found mapping [%d]->\"%s\"", id, name);
> +
> + return 0;
> +}
> +
> +/* rmnet_vnd_is_vnd() - Determine if net_device is RmNet owned
> virtual devices
> + * @dev: Network device to test
> + *
> + * Searches through list of known RmNet virtual devices. This
> function is O(n)
> + * and should not be used in the data path.
> + *
> + * Return:
> + * - 0 if device is not RmNet virtual device
> + * - 1 if device is RmNet virtual device
> + */
> +int rmnet_vnd_is_vnd(struct net_device *dev)
> +{
> + /* This is not an efficient search, but, this will only be
> called in
> + * a configuration context, and the list is small.
> + */
> + int i;
> +
> + if (!dev)
> + return 0;
> +
> + for (i = 0; i < RMNET_DATA_MAX_VND; i++)
> + if (dev == rmnet_devices[i])
> + return i + 1;
> +
> + return 0;
> +}
> +
> +/* rmnet_vnd_get_le_config() - Get the logical endpoint
> configuration
> + * @dev: Virtual device node
> + *
> + * Gets the logical endpoint configuration for a RmNet virtual
> network device
> + * node. Caller should confirm that devices is a RmNet VND before
> calling.
> + *
> + * Return:
> + * - Pointer to logical endpoint configuration structure
> + * - 0 (null) if dev is null
> + */
> +struct rmnet_logical_ep_conf_s *rmnet_vnd_get_le_config(struct
> net_device *dev)
> +{
> + struct rmnet_vnd_private_s *dev_conf;
> +
> + if (!dev)
> + return 0;
> +
> + dev_conf = (struct rmnet_vnd_private_s *)netdev_priv(dev);
> + if (!dev_conf)
> + return 0;
> +
> + return &dev_conf->local_ep;
> +}
> +
> +/* rmnet_vnd_do_flow_control() - Process flow control request
> + * @dev: Virtual network device node to do lookup on
> + * @enable: boolean to enable/disable flow.
> + *
> + * Return:
> + * - 0 if successful
> + * - 1 if no mapping is found
> + * - 2 if dev is not RmNet virtual network device node
> + */
> +int rmnet_vnd_do_flow_control(struct net_device *dev, int enable)
> +{
> + struct rmnet_vnd_private_s *dev_conf;
> +
> + if (unlikely(!dev))
> + return 2;
> +
> + if (!rmnet_vnd_is_vnd(dev))
> + return 2;
> +
> + dev_conf = (struct rmnet_vnd_private_s *)netdev_priv(dev);
> +
> + if (unlikely(!dev_conf))
> + return 2;
> +
> + LOGD("Setting VND TX queue state to %d", enable);
> + /* Although we expect similar number of enable/disable
> + * commands, optimize for the disable. That is more
> + * latency sensitive than enable
> + */
> + if (unlikely(enable))
> + netif_wake_queue(dev);
> + else
> + netif_stop_queue(dev);
> +
> + return 0;
> +}
> +
> +/* rmnet_vnd_get_by_id() - Get VND by array index ID
> + * @id: Virtual network deice id [0:RMNET_DATA_MAX_VND]
> + *
> + * Return:
> + * - 0 if no device or ID out of range
> + * - otherwise return pointer to VND net_device struct
> + */
> +struct net_device *rmnet_vnd_get_by_id(int id)
> +{
> + if (id < 0 || id >= RMNET_DATA_MAX_VND) {
> + pr_err("Bug; VND ID out of bounds");
> + return 0;
> + }
> + return rmnet_devices[id];
> +}
> diff --git a/net/rmnet_data/rmnet_data_vnd.h
> b/net/rmnet_data/rmnet_data_vnd.h
> new file mode 100644
> index 0000000..2903ffe
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_data_vnd.h
> @@ -0,0 +1,34 @@
> +/* Copyright (c) 2013-2017, The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * RMNET Data Virtual Network Device APIs
> + *
> + */
> +
> +#include <linux/types.h>
> +
> +#ifndef _RMNET_DATA_VND_H_
> +#define _RMNET_DATA_VND_H_
> +
> +int rmnet_vnd_do_flow_control(struct net_device *dev, int enable);
> +struct rmnet_logical_ep_conf_s *rmnet_vnd_get_le_config(struct
> net_device *dev);
> +int rmnet_vnd_get_name(int id, char *name, int name_len);
> +int rmnet_vnd_create_dev(int id, struct net_device **new_device,
> + const char *prefix);
> +int rmnet_vnd_free_dev(int id);
> +int rmnet_vnd_rx_fixup(struct sk_buff *skb, struct net_device *dev);
> +int rmnet_vnd_tx_fixup(struct sk_buff *skb, struct net_device *dev);
> +int rmnet_vnd_is_vnd(struct net_device *dev);
> +int rmnet_vnd_init(void);
> +void rmnet_vnd_exit(void);
> +struct net_device *rmnet_vnd_get_by_id(int id);
> +
> +#endif /* _RMNET_DATA_VND_H_ */
> diff --git a/net/rmnet_data/rmnet_map.h b/net/rmnet_data/rmnet_map.h
> new file mode 100644
> index 0000000..7d533aa
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_map.h
> @@ -0,0 +1,100 @@
> +/* Copyright (c) 2013-2017, The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/types.h>
> +#include <linux/spinlock.h>
> +
> +#ifndef _RMNET_MAP_H_
> +#define _RMNET_MAP_H_
> +
> +struct rmnet_map_control_command_s {
> + u8 command_name;
> + u8 cmd_type:2;
> + u8 reserved:6;
> + u16 reserved2;
> + u32 transaction_id;
> + union {
> + u8 data[65528];
> + struct {
> + u16 ip_family:2;
> + u16 reserved:14;
> + u16 flow_control_seq_num;
> + u32 qos_id;
> + } flow_control;
> + };
> +} __aligned(1);
> +
> +enum rmnet_map_results_e {
> + RMNET_MAP_SUCCESS,
> + RMNET_MAP_CONSUMED,
> + RMNET_MAP_GENERAL_FAILURE,
> + RMNET_MAP_NOT_ENABLED,
> + RMNET_MAP_FAILED_AGGREGATION,
> + RMNET_MAP_FAILED_MUX
> +};
> +
> +enum rmnet_map_mux_errors_e {
> + RMNET_MAP_MUX_SUCCESS,
> + RMNET_MAP_MUX_INVALID_MUX_ID,
> + RMNET_MAP_MUX_INVALID_PAD_LENGTH,
> + RMNET_MAP_MUX_INVALID_PKT_LENGTH,
> + /* This should always be the last element */
> + RMNET_MAP_MUX_ENUM_LENGTH
> +};
> +
> +enum rmnet_map_commands_e {
> + RMNET_MAP_COMMAND_NONE,
> + RMNET_MAP_COMMAND_FLOW_DISABLE,
> + RMNET_MAP_COMMAND_FLOW_ENABLE,
> + /* These should always be the last 2 elements */
> + RMNET_MAP_COMMAND_UNKNOWN,
> + RMNET_MAP_COMMAND_ENUM_LENGTH
> +};
> +
> +struct rmnet_map_header_s {
> + u8 pad_len:6;
> + u8 reserved_bit:1;
> + u8 cd_bit:1;
> + u8 mux_id;
> + u16 pkt_len;
> +} __aligned(1);
> +
> +#define RMNET_MAP_GET_MUX_ID(Y) (((struct rmnet_map_header_s *) \
> + (Y)->data)->mux_id)
> +#define RMNET_MAP_GET_CD_BIT(Y) (((struct rmnet_map_header_s *) \
> + (Y)->data)->cd_bit)
> +#define RMNET_MAP_GET_PAD(Y) (((struct rmnet_map_header_s *) \
> + (Y)->data)->pad_len)
> +#define RMNET_MAP_GET_CMD_START(Y) ((struct
> rmnet_map_control_command_s *) \
> + ((Y)->data + \
> + sizeof(struct
> rmnet_map_header_s)))
> +#define RMNET_MAP_GET_LENGTH(Y) (ntohs(((struct rmnet_map_header_s
> *) \
> + (Y)->data)->pkt_len))
> +
> +#define RMNET_MAP_COMMAND_REQUEST 0
> +#define RMNET_MAP_COMMAND_ACK 1
> +#define RMNET_MAP_COMMAND_UNSUPPORTED 2
> +#define RMNET_MAP_COMMAND_INVALID 3
> +
> +#define RMNET_MAP_NO_PAD_BYTES 0
> +#define RMNET_MAP_ADD_PAD_BYTES 1
> +
> +u8 rmnet_map_demultiplex(struct sk_buff *skb);
> +struct sk_buff *rmnet_map_deaggregate(struct sk_buff *skb,
> + struct rmnet_phys_ep_conf_s
> *config);
> +
> +struct rmnet_map_header_s *rmnet_map_add_map_header(struct sk_buff
> *skb,
> + int hdrlen, int
> pad);
> +rx_handler_result_t rmnet_map_command(struct sk_buff *skb,
> + struct rmnet_phys_ep_conf_s
> *config);
> +
> +#endif /* _RMNET_MAP_H_ */
> diff --git a/net/rmnet_data/rmnet_map_command.c
> b/net/rmnet_data/rmnet_map_command.c
> new file mode 100644
> index 0000000..acb0b11
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_map_command.c
> @@ -0,0 +1,180 @@
> +/* Copyright (c) 2013-2017, The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/skbuff.h>
> +#include <linux/netdevice.h>
> +#include <linux/rmnet_data.h>
> +#include <net/pkt_sched.h>
> +#include "rmnet_data_config.h"
> +#include "rmnet_map.h"
> +#include "rmnet_data_private.h"
> +#include "rmnet_data_vnd.h"
> +#include "rmnet_data_stats.h"
> +
> +RMNET_LOG_MODULE(RMNET_DATA_LOGMASK_MAPC);
> +
> +unsigned long int
> rmnet_map_command_stats[RMNET_MAP_COMMAND_ENUM_LENGTH];
> +module_param_array(rmnet_map_command_stats, ulong, 0, 0444);
> +MODULE_PARM_DESC(rmnet_map_command_stats, "MAP command statistics");
> +
> +/* rmnet_map_do_flow_control() - Process MAP flow control command
> + * @skb: Socket buffer containing the MAP flow control message
> + * @config: Physical end-point configuration of ingress device
> + * @enable: boolean for enable/disable
> + *
> + * Process in-band MAP flow control messages. Assumes mux ID is
> mapped to a
> + * RmNet Data vitrual network device.
> + *
> + * Return:
> + * - RMNET_MAP_COMMAND_UNSUPPORTED on any error
> + * - RMNET_MAP_COMMAND_ACK on success
> + */
> +static u8 rmnet_map_do_flow_control(struct sk_buff *skb,
> + struct rmnet_phys_ep_conf_s
> *config,
> + int enable)
> +{
> + struct rmnet_map_control_command_s *cmd;
> + struct net_device *vnd;
> + struct rmnet_logical_ep_conf_s *ep;
> + u8 mux_id;
> + u16 ip_family;
> + u16 fc_seq;
> + u32 qos_id;
> + int r;
> +
> + if (unlikely(!skb || !config))
> + return RX_HANDLER_CONSUMED;
> +
> + mux_id = RMNET_MAP_GET_MUX_ID(skb);
> + cmd = RMNET_MAP_GET_CMD_START(skb);
> +
> + if (mux_id >= RMNET_DATA_MAX_LOGICAL_EP) {
> + LOGD("Got packet on %s with bad mux id %d",
> + skb->dev->name, mux_id);
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_MAPC_BAD_MUX);
> + return RX_HANDLER_CONSUMED;
> + }
> +
> + ep = &config->muxed_ep[mux_id];
> +
> + if (!ep->refcount) {
> + LOGD("Packet on %s:%d; has no logical endpoint
> config",
> + skb->dev->name, mux_id);
> +
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_MAPC_MUX_NO_EP);
> + return RX_HANDLER_CONSUMED;
> + }
> +
> + vnd = ep->egress_dev;
> +
> + ip_family = cmd->flow_control.ip_family;
> + fc_seq = ntohs(cmd->flow_control.flow_control_seq_num);
> + qos_id = ntohl(cmd->flow_control.qos_id);
> +
> + /* Ignore the ip family and pass the sequence number for
> both v4 and v6
> + * sequence. User space does not support creating dedicated
> flows for
> + * the 2 protocols
> + */
> + r = rmnet_vnd_do_flow_control(vnd, enable);
> + LOGD("dev:%s, qos_id:0x%08X, ip_family:%hd, fc_seq %hd,
> en:%d",
> + skb->dev->name, qos_id, ip_family & 3, fc_seq, enable);
> +
> + if (r) {
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_MAPC_UNSUPPORTED);
> + return RMNET_MAP_COMMAND_UNSUPPORTED;
> + } else {
> + return RMNET_MAP_COMMAND_ACK;
> + }
> +}
> +
> +/* rmnet_map_send_ack() - Send N/ACK message for MAP commands
> + * @skb: Socket buffer containing the MAP command message
> + * @type: N/ACK message selector
> + * @config: Physical end-point configuration of ingress device
> + *
> + * skb is modified to contain the message type selector. The message
> is then
> + * transmitted on skb->dev. Note that this function grabs global Tx
> lock on
> + * skb->dev for latency reasons.
> + *
> + * Return:
> + * - void
> + */
> +static void rmnet_map_send_ack(struct sk_buff *skb,
> + unsigned char type,
> + struct rmnet_phys_ep_conf_s *config)
> +{
> + struct rmnet_map_control_command_s *cmd;
> + int xmit_status;
> +
> + if (unlikely(!skb))
> + return;
> +
> + skb->protocol = htons(ETH_P_MAP);
> +
> + cmd = RMNET_MAP_GET_CMD_START(skb);
> + cmd->cmd_type = type & 0x03;
> +
> + netif_tx_lock(skb->dev);
> + xmit_status = skb->dev->netdev_ops->ndo_start_xmit(skb, skb-
> >dev);
> + netif_tx_unlock(skb->dev);
> +
> + LOGD("MAP command ACK=%hhu sent with rc: %d", type & 0x03,
> xmit_status);
> +}
> +
> +/* rmnet_map_command() - Entry point for handling MAP commands
> + * @skb: Socket buffer containing the MAP command message
> + * @config: Physical end-point configuration of ingress device
> + *
> + * Process MAP command frame and send N/ACK message as appropriate.
> Message cmd
> + * name is decoded here and appropriate handler is called.
> + *
> + * Return:
> + * - RX_HANDLER_CONSUMED. Command frames are always consumed.
> + */
> +rx_handler_result_t rmnet_map_command(struct sk_buff *skb,
> + struct rmnet_phys_ep_conf_s
> *config)
> +{
> + struct rmnet_map_control_command_s *cmd;
> + unsigned char command_name;
> + unsigned char rc = 0;
> +
> + if (unlikely(!skb))
> + return RX_HANDLER_CONSUMED;
> +
> + cmd = RMNET_MAP_GET_CMD_START(skb);
> + command_name = cmd->command_name;
> +
> + if (command_name < RMNET_MAP_COMMAND_ENUM_LENGTH)
> + rmnet_map_command_stats[command_name]++;
> +
> + switch (command_name) {
> + case RMNET_MAP_COMMAND_FLOW_ENABLE:
> + rc = rmnet_map_do_flow_control(skb, config, 1);
> + break;
> +
> + case RMNET_MAP_COMMAND_FLOW_DISABLE:
> + rc = rmnet_map_do_flow_control(skb, config, 0);
> + break;
> +
> + default:
> + rmnet_map_command_stats[RMNET_MAP_COMMAND_UNKNOWN]++
> ;
> + LOGM("Uknown MAP command: %d", command_name);
> + rc = RMNET_MAP_COMMAND_UNSUPPORTED;
> + rmnet_kfree_skb(skb,
> RMNET_STATS_SKBFREE_MAPC_UNSUPPORTED);
> + break;
> + }
> + if (rc == RMNET_MAP_COMMAND_ACK)
> + rmnet_map_send_ack(skb, rc, config);
> + return RX_HANDLER_CONSUMED;
> +}
> diff --git a/net/rmnet_data/rmnet_map_data.c
> b/net/rmnet_data/rmnet_map_data.c
> new file mode 100644
> index 0000000..33bde72
> --- /dev/null
> +++ b/net/rmnet_data/rmnet_map_data.c
> @@ -0,0 +1,148 @@
> +/* Copyright (c) 2013-2017, The Linux Foundation. All rights
> reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2
> and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * RMNET Data MAP protocol
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/skbuff.h>
> +#include <linux/netdevice.h>
> +#include <linux/rmnet_data.h>
> +#include <linux/spinlock.h>
> +#include <linux/workqueue.h>
> +#include <linux/time.h>
> +#include <linux/ip.h>
> +#include <linux/ipv6.h>
> +#include <linux/udp.h>
> +#include <linux/tcp.h>
> +#include <linux/in.h>
> +#include <net/ip.h>
> +#include <net/checksum.h>
> +#include <net/ip6_checksum.h>
> +#include "rmnet_data_config.h"
> +#include "rmnet_map.h"
> +#include "rmnet_data_private.h"
> +#include "rmnet_data_stats.h"
> +#include "rmnet_data_trace.h"
> +
> +RMNET_LOG_MODULE(RMNET_DATA_LOGMASK_MAPD);
> +
> +#define RMNET_MAP_DEAGGR_SPACING 64
> +#define RMNET_MAP_DEAGGR_HEADROOM (RMNET_MAP_DEAGGR_SPACING / 2)
> +
> +/* rmnet_map_add_map_header() - Adds MAP header to front of skb-
> >data
> + * @skb: Socket buffer ("packet") to modify
> + * @hdrlen: Number of bytes of header data which should not be
> included in
> + * MAP length field
> + * @pad: Specify if padding the MAP packet to make it 4 byte
> aligned is
> + * necessary
> + *
> + * Padding is calculated and set appropriately in MAP header. Mux ID
> is
> + * initialized to 0.
> + *
> + * Return:
> + * - Pointer to MAP structure
> + * - 0 (null) if insufficient headroom
> + * - 0 (null) if insufficient tailroom for padding bytes
> + *
> + * todo: Parameterize skb alignment
> + */
> +struct rmnet_map_header_s *rmnet_map_add_map_header(struct sk_buff
> *skb,
> + int hdrlen, int
> pad)
> +{
> + u32 padding, map_datalen;
> + u8 *padbytes;
> + struct rmnet_map_header_s *map_header;
> +
> + if (skb_headroom(skb) < sizeof(struct rmnet_map_header_s))
> + return 0;
> +
> + map_datalen = skb->len - hdrlen;
> + map_header = (struct rmnet_map_header_s *)
> + skb_push(skb, sizeof(struct
> rmnet_map_header_s));
> + memset(map_header, 0, sizeof(struct rmnet_map_header_s));
> +
> + if (pad == RMNET_MAP_NO_PAD_BYTES) {
> + map_header->pkt_len = htons(map_datalen);
> + return map_header;
> + }
> +
> + padding = ALIGN(map_datalen, 4) - map_datalen;
> +
> + if (padding == 0)
> + goto done;
> +
> + if (skb_tailroom(skb) < padding)
> + return 0;
> +
> + padbytes = (u8 *)skb_put(skb, padding);
> + LOGD("pad: %d", padding);
> + memset(padbytes, 0, padding);
> +
> +done:
> + map_header->pkt_len = htons(map_datalen + padding);
> + map_header->pad_len = padding & 0x3F;
> +
> + return map_header;
> +}
> +
> +/* rmnet_map_deaggregate() - Deaggregates a single packet
> + * @skb: Source socket buffer containing multiple MAP frames
> + * @config: Physical endpoint configuration of the ingress
> device
> + *
> + * A whole new buffer is allocated for each portion of an aggregated
> frame.
> + * Caller should keep calling deaggregate() on the source skb until
> 0 is
> + * returned, indicating that there are no more packets to
> deaggregate. Caller
> + * is responsible for freeing the original skb.
> + *
> + * Return:
> + * - Pointer to new skb
> + * - 0 (null) if no more aggregated packets
> + */
> +struct sk_buff *rmnet_map_deaggregate(struct sk_buff *skb,
> + struct rmnet_phys_ep_conf_s
> *config)
> +{
> + struct sk_buff *skbn;
> + struct rmnet_map_header_s *maph;
> + u32 packet_len;
> +
> + if (skb->len == 0)
> + return 0;
> +
> + maph = (struct rmnet_map_header_s *)skb->data;
> + packet_len = ntohs(maph->pkt_len) + sizeof(struct
> rmnet_map_header_s);
> +
> + if ((((int)skb->len) - ((int)packet_len)) < 0) {
> + LOGM("%s", "Got malformed packet. Dropping");
> + return 0;
> + }
> +
> + skbn = alloc_skb(packet_len + RMNET_MAP_DEAGGR_SPACING,
> GFP_ATOMIC);
> + if (!skbn)
> + return 0;
> +
> + skbn->dev = skb->dev;
> + skb_reserve(skbn, RMNET_MAP_DEAGGR_HEADROOM);
> + skb_put(skbn, packet_len);
> + memcpy(skbn->data, skb->data, packet_len);
> + skb_pull(skb, packet_len);
> +
> + /* Some hardware can send us empty frames. Catch them */
> + if (ntohs(maph->pkt_len) == 0) {
> + LOGD("Dropping empty MAP frame");
> + rmnet_kfree_skb(skbn,
> RMNET_STATS_SKBFREE_DEAGG_DATA_LEN_0);
> + return 0;
> + }
> +
> + return skbn;
> +}
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH net-next 1/1 v2] net: rmnet_data: Initial implementation
2017-03-24 22:21 ` Dan Williams
@ 2017-03-25 0:49 ` Subash Abhinov Kasiviswanathan
2017-03-31 22:41 ` Dan Williams
0 siblings, 1 reply; 12+ messages in thread
From: Subash Abhinov Kasiviswanathan @ 2017-03-25 0:49 UTC (permalink / raw)
To: Dan Williams; +Cc: netdev, davem, fengguang.wu
> (re-sending from an address that's actually subscribed to netdev@...)
>
> The first thing that jumps out at me is "why isn't this using
> rtnl_link_ops?"
>
> To me (and perhaps I'm completely wrong) the structure here is a lot
> like VLAN interfaces. You have a base device (whether that's a netdev
> or not) and you essentially "ip link add link cdc-wdm0 name rmnet0 type
> rmnet id 5". Does the aggregation happen only on the downlink (eg,
> device -> host) or can the host send aggregated packets too?
Hi Dan
Yes, you are correct. We associate this driver with a physical device
and
then create rmnet devices over it as needed for multiplexing.
Aggregation is supported both on downlink and uplink by Qualcomm
Technologies, Inc. modem hardware. This initial patchset implements only
downlink aggregation since uplink aggregation is rarely enabled or used.
I'll send a separate patchset for that.
> Using rtnl_link_ops would get rid of ASSOC_NET_DEV, UNASSOC_NET_DEV,
> NEW_VND, NEW_VND_WITH_PREFIX, and FREE_VND. GET_NET_DEV_ASSOC goes
> away becuase you use normal 'kobject' associations and you can derive
> the rmnet parent through sysfs links. rmnet_nl_msg_s goes away,
> because you can use nla_policy.
>
> Just a thought; there seems to be a ton of overlap with rtnl_link_ops
> in the control plane here.
As of now, we have been using a custom netlink userspace tool for
configuring the interfaces by listening to RMNET_NETLINK_PROTO events.
Does that mean that configuration needs to be moved to ip tool by
adding a new option for rmnet (like how you have mentioned above)
and add additional options for end point configuration as well?
> Any thoughts on how this plays with net namespaces?
We have not tried it with different net namespaces since we never had
such use cases internally. We can look into this.
> Also, I'm not sure if it make sense to provide first class tracepoints
> for a specific driver, as it's not clear if they are userspace API or
> not and thus may need to be kept stable. Or are perf probes enough
> instead?
We have some tracepoints which are in datapath and some for specific
events such as device unregistration and configuration events
association.
Most of these devices are on ARM64 and need to support older kernels,
(from 3.10) so we had to rely on tracepoints. I believe ARM64 got trace
point support somewhat recently. I was not aware of the restriction of
tracepoints, so I can remove that.
>
> What's RMNET_EPMODE_BRIDGE and how is it used?
RMNET_EPMODE_BRIDGE is for bridging two different physical interfaces.
An example is sending raw bytes from hardware to USB - this can be used
if a PC connected by USB would require the data in the MAP format.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH net-next 1/1 v2] net: rmnet_data: Initial implementation
2017-03-25 0:49 ` Subash Abhinov Kasiviswanathan
@ 2017-03-31 22:41 ` Dan Williams
2017-04-01 5:43 ` Subash Abhinov Kasiviswanathan
0 siblings, 1 reply; 12+ messages in thread
From: Dan Williams @ 2017-03-31 22:41 UTC (permalink / raw)
To: Subash Abhinov Kasiviswanathan; +Cc: netdev, davem, fengguang.wu
On Fri, 2017-03-24 at 18:49 -0600, Subash Abhinov Kasiviswanathan
wrote:
> > (re-sending from an address that's actually subscribed to
> > netdev@...)
> >
> > The first thing that jumps out at me is "why isn't this using
> > rtnl_link_ops?"
> >
> > To me (and perhaps I'm completely wrong) the structure here is a
> > lot
> > like VLAN interfaces. You have a base device (whether that's a
> > netdev
> > or not) and you essentially "ip link add link cdc-wdm0 name rmnet0
> > type
> > rmnet id 5". Does the aggregation happen only on the downlink (eg,
> > device -> host) or can the host send aggregated packets too?
>
> Hi Dan
>
> Yes, you are correct. We associate this driver with a physical
> device
> and
> then create rmnet devices over it as needed for multiplexing.
Yeah, seems quite a bit like VLAN (from a workflow perspective, not
quite as much from a protocol one) and I think the same workflow could
work for this too. Would be nice to eventually get qmi_wwan onto the
same base, if possible (though we'd need to preserve the 802.3
capability somehow for devices that don't support raw-ip).
> Aggregation is supported both on downlink and uplink by Qualcomm
> Technologies, Inc. modem hardware. This initial patchset implements
> only
> downlink aggregation since uplink aggregation is rarely enabled or
> used.
> I'll send a separate patchset for that.
Does the aggregation happen at the level of the raw device, or at the
level of the MUX channels? eg, can I aggregate packets from multiple
MUX channels into the same request, especially on USB devices?
> > Using rtnl_link_ops would get rid of ASSOC_NET_DEV,
> > UNASSOC_NET_DEV,
> > NEW_VND, NEW_VND_WITH_PREFIX, and FREE_VND. GET_NET_DEV_ASSOC goes
> > away becuase you use normal 'kobject' associations and you can
> > derive
> > the rmnet parent through sysfs links. rmnet_nl_msg_s goes away,
> > because you can use nla_policy.
> >
> > Just a thought; there seems to be a ton of overlap with
> > rtnl_link_ops
> > in the control plane here.
>
> As of now, we have been using a custom netlink userspace tool for
> configuring the interfaces by listening to RMNET_NETLINK_PROTO
> events.
> Does that mean that configuration needs to be moved to ip tool by
> adding a new option for rmnet (like how you have mentioned above)
> and add additional options for end point configuration as well?
It doesn't necessarily mean that configuration would need to move to
the IP tool. I just used it as an example of how VLAN works and how
rmnet could work as well, quite easily with the ip tool.
Since the ip tool is based on netlink, both it and your userspace
library could use the same netlink attributes and families to do the
same thing.
Essentially, I am recommending that instead of your current custom
netlink commands, port them over to rtnetlink which will mean less code
for you, and a more standard kernel interface for everyone.
> > Any thoughts on how this plays with net namespaces?
>
> We have not tried it with different net namespaces since we never had
> such use cases internally. We can look into this.
One use-case is to put different packet data contexts into different
namespaces. You could then isolate different EPS/PDP contexts by
putting them into different network namespaces, and for example have
your IMS handler only be able to access its own EPS/PDP context.
We could already do this with qmi_wwan on devices that provide multiple
USB endpoints for QMI/rmnet, but I thought the point of the MUX
protocol was to allow a single endpoint for rmnet that can MUX multiple
packet data contexts. So it would be nice to allow each rmnet netdev
to be placed into a different network namespace.
> > Also, I'm not sure if it make sense to provide first class
> > tracepoints
> > for a specific driver, as it's not clear if they are userspace API
> > or
> > not and thus may need to be kept stable. Or are perf probes
> > enough
> > instead?
>
> We have some tracepoints which are in datapath and some for specific
> events such as device unregistration and configuration events
> association.
> Most of these devices are on ARM64 and need to support older kernels,
> (from 3.10) so we had to rely on tracepoints. I believe ARM64 got
> trace
> point support somewhat recently. I was not aware of the restriction
> of
> tracepoints, so I can remove that.
Yeah, best to remove that for now, you can propose to add them back
later and see what people say.
> >
> > What's RMNET_EPMODE_BRIDGE and how is it used?
>
> RMNET_EPMODE_BRIDGE is for bridging two different physical
> interfaces.
> An example is sending raw bytes from hardware to USB - this can be
> used
> if a PC connected by USB would require the data in the MAP format.
Like a usb gadget rmnet interface for debugging?
Dan
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH net-next 1/1 v2] net: rmnet_data: Initial implementation
2017-03-31 22:41 ` Dan Williams
@ 2017-04-01 5:43 ` Subash Abhinov Kasiviswanathan
0 siblings, 0 replies; 12+ messages in thread
From: Subash Abhinov Kasiviswanathan @ 2017-04-01 5:43 UTC (permalink / raw)
To: Dan Williams; +Cc: netdev, davem, fengguang.wu, netdev-owner
> Yeah, seems quite a bit like VLAN (from a workflow perspective, not
> quite as much from a protocol one) and I think the same workflow could
> work for this too. Would be nice to eventually get qmi_wwan onto the
> same base, if possible (though we'd need to preserve the 802.3
> capability somehow for devices that don't support raw-ip).
>
> It doesn't necessarily mean that configuration would need to move to
> the IP tool. I just used it as an example of how VLAN works and how
> rmnet could work as well, quite easily with the ip tool.
>
> Since the ip tool is based on netlink, both it and your userspace
> library could use the same netlink attributes and families to do the
> same thing.
>
> Essentially, I am recommending that instead of your current custom
> netlink commands, port them over to rtnetlink which will mean less code
> for you, and a more standard kernel interface for everyone.
>
Thanks for your comments. I'll work on conversion into rtnl_link_ops.
Ethernet frames are supported in pass through mode (though not used
often)
but they cannot be used in conjunction with MAP functionality.
> Does the aggregation happen at the level of the raw device, or at the
> level of the MUX channels? eg, can I aggregate packets from multiple
> MUX channels into the same request, especially on USB devices?
>
Hardware does allow aggregation of packets from different mux channels
in
a single frame.
> One use-case is to put different packet data contexts into different
> namespaces. You could then isolate different EPS/PDP contexts by
> putting them into different network namespaces, and for example have
> your IMS handler only be able to access its own EPS/PDP context.
>
> We could already do this with qmi_wwan on devices that provide multiple
> USB endpoints for QMI/rmnet, but I thought the point of the MUX
> protocol was to allow a single endpoint for rmnet that can MUX multiple
> packet data contexts. So it would be nice to allow each rmnet netdev
> to be placed into a different network namespace.
>
I need to study more about namespaces since I am not familiar with it.
I'll add support for it in a follow up patchset.
> Like a usb gadget rmnet interface for debugging?
>
Yes, its mostly used for test only.
^ permalink raw reply [flat|nested] 12+ messages in thread