[U-Boot] Ethernet not detecting on Odroid u3

[U-Boot] Ethernet not detecting on Odroid u3

[Anand Moon]

Hi All,

I tried to compile the latest u-boot for Odroid U3.
issue is that Ethernet is not able to detected.

Please let me know what need to enable USB Ethernet
to support tftp boot.

Best Regards
-Anand

------
U-Boot 2017.01-02075-g4386feb-dirty (Jan 12 2017 - 06:17:08 +0000)

CPU:   Exynos4412 @ 1 GHz
Model: Odroid based on Exynos4412
Board: Odroid based on Exynos4412
Type:  u3
DRAM:  2 GiB
LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
*** Warning - bad CRC, using default environment

Net:   No ethernet found.
Hit any key to stop autoboot:  0
Odroid #
Odroid #
Odroid # usb start
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
       scanning usb for ethernet devices... 0 Ethernet Device(s) found
Odroid #
Odroid #
Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
Odroid # usb start
Odroid # usb info
1: Hub,  USB Revision 2.0
 - u-boot EHCI Host Controller
 - Class: Hub
 - PacketSize: 64  Configurations: 1
 - Vendor: 0x0000  Product 0x0000 Version 1.0
   Configuration: 1
   - Interfaces: 1 Self Powered 0mA
     Interface: 0
     - Alternate Setting 0, Endpoints: 1
     - Class Hub
     - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms

Odroid # reset

[U-Boot] Ethernet not detecting on Odroid u3

[Jaehoon Chung]

Hi Anand,

On 01/12/2017 05:32 PM, Anand Moon wrote:
> Hi All,
> 
> I tried to compile the latest u-boot for Odroid U3.
> issue is that Ethernet is not able to detected.
> 
> Please let me know what need to enable USB Ethernet
> to support tftp boot.

I didn't have the experience with tftp boot..
But i will check this with odroid-u3.

Best Regards,
Jaehoon Chung

> 
> Best Regards
> -Anand
> 
> ------
> U-Boot 2017.01-02075-g4386feb-dirty (Jan 12 2017 - 06:17:08 +0000)
> 
> CPU:   Exynos4412 @ 1 GHz
> Model: Odroid based on Exynos4412
> Board: Odroid based on Exynos4412
> Type:  u3
> DRAM:  2 GiB
> LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
> LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
> LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
> MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
> *** Warning - bad CRC, using default environment
> 
> Net:   No ethernet found.
> Hit any key to stop autoboot:  0
> Odroid #
> Odroid #
> Odroid # usb start
> starting USB...
> USB0:   USB EHCI 1.00
> scanning bus 0 for devices... 1 USB Device(s) found
>        scanning usb for ethernet devices... 0 Ethernet Device(s) found
> Odroid #
> Odroid #
> Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
> Odroid # usb start
> Odroid # usb info
> 1: Hub,  USB Revision 2.0
>  - u-boot EHCI Host Controller
>  - Class: Hub
>  - PacketSize: 64  Configurations: 1
>  - Vendor: 0x0000  Product 0x0000 Version 1.0
>    Configuration: 1
>    - Interfaces: 1 Self Powered 0mA
>      Interface: 0
>      - Alternate Setting 0, Endpoints: 1
>      - Class Hub
>      - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
> 
> Odroid # reset
> 
> 
> 

[U-Boot] Ethernet not detecting on Odroid u3

[Lukasz Majewski]

Hi,

> Hi Anand,
> 
> On 01/12/2017 05:32 PM, Anand Moon wrote:
> > Hi All,
> > 
> > I tried to compile the latest u-boot for Odroid U3.
> > issue is that Ethernet is not able to detected.

Please try "usb start".

> > 
> > Please let me know what need to enable USB Ethernet
> > to support tftp boot.
> 
> I didn't have the experience with tftp boot..
> But i will check this with odroid-u3.
> 
> Best Regards,
> Jaehoon Chung
> 
> > 
> > Best Regards
> > -Anand
> > 
> > ------
> > U-Boot 2017.01-02075-g4386feb-dirty (Jan 12 2017 - 06:17:08 +0000)
> > 
> > CPU:   Exynos4412 @ 1 GHz
> > Model: Odroid based on Exynos4412
> > Board: Odroid based on Exynos4412
> > Type:  u3
> > DRAM:  2 GiB
> > LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
> > LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
> > LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
> > MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
> > *** Warning - bad CRC, using default environment
> > 
> > Net:   No ethernet found.
> > Hit any key to stop autoboot:  0
> > Odroid #
> > Odroid #
> > Odroid # usb start
> > starting USB...
> > USB0:   USB EHCI 1.00
> > scanning bus 0 for devices... 1 USB Device(s) found
> >        scanning usb for ethernet devices... 0 Ethernet Device(s)
> > found Odroid #
> > Odroid #
> > Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
> > Odroid # usb start
> > Odroid # usb info
> > 1: Hub,  USB Revision 2.0
> >  - u-boot EHCI Host Controller
> >  - Class: Hub
> >  - PacketSize: 64  Configurations: 1
> >  - Vendor: 0x0000  Product 0x0000 Version 1.0
> >    Configuration: 1
> >    - Interfaces: 1 Self Powered 0mA
> >      Interface: 0
> >      - Alternate Setting 0, Endpoints: 1
> >      - Class Hub
> >      - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
> > 
> > Odroid # reset
> > 
> > 
> > 




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de

[U-Boot] Ethernet not detecting on Odroid u3

[Anand Moon]

Hi Lukas/Jaehoon

On 13 January 2017 at 04:30, Lukasz Majewski <lukma@denx.de> wrote:
> Hi,
>
>> Hi Anand,
>>
>> On 01/12/2017 05:32 PM, Anand Moon wrote:
>> > Hi All,
>> >
>> > I tried to compile the latest u-boot for Odroid U3.
>> > issue is that Ethernet is not able to detected.
>
> Please try "usb start".
>
>> >
>> > Please let me know what need to enable USB Ethernet
>> > to support tftp boot.
>>
>> I didn't have the experience with tftp boot..
>> But i will check this with odroid-u3.
>>
>> Best Regards,
>> Jaehoon Chung
>>
>> >
>> > Best Regards
>> > -Anand
>> >
>> > ------
>> > U-Boot 2017.01-02075-g4386feb-dirty (Jan 12 2017 - 06:17:08 +0000)
>> >
>> > CPU:   Exynos4412 @ 1 GHz
>> > Model: Odroid based on Exynos4412
>> > Board: Odroid based on Exynos4412
>> > Type:  u3
>> > DRAM:  2 GiB
>> > LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
>> > LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
>> > LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
>> > MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
>> > *** Warning - bad CRC, using default environment
>> >
>> > Net:   No ethernet found.
>> > Hit any key to stop autoboot:  0
>> > Odroid #
>> > Odroid #
>> > Odroid # usb start
>> > starting USB...
>> > USB0:   USB EHCI 1.00
>> > scanning bus 0 for devices... 1 USB Device(s) found
>> >        scanning usb for ethernet devices... 0 Ethernet Device(s)
>> > found Odroid #
>> > Odroid #
>> > Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
>> > Odroid # usb start
>> > Odroid # usb info
>> > 1: Hub,  USB Revision 2.0
>> >  - u-boot EHCI Host Controller
>> >  - Class: Hub
>> >  - PacketSize: 64  Configurations: 1
>> >  - Vendor: 0x0000  Product 0x0000 Version 1.0
>> >    Configuration: 1
>> >    - Interfaces: 1 Self Powered 0mA
>> >      Interface: 0
>> >      - Alternate Setting 0, Endpoints: 1
>> >      - Class Hub
>> >      - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
>> >
>> > Odroid # reset
>> >
[snip]

I have tried usb start command as per the doc/README.odroid
what I felt was is their some config option missing.

Last time I face similar issue for Odroid XU4

commit 1b108880e6433e398681785f51b2a2dca983cd1b
(usb: xhci: Fix vendor command error if the request type is
USB_REQ_SET_ADDRESS or USB_REQ_SET_CONFIGURATION)

Solve the tftp issue for r8153 on Odroid XU4.

so I feel some similar fix is needed for ehci accept only standard
address request.

Best Regards
-Anand Moon

[U-Boot] Ethernet not detecting on Odroid u3

[Siarhei Siamashka]

On Thu, 12 Jan 2017 14:02:48 +0530
Anand Moon <linux.amoon@gmail.com> wrote:

> Hi All,
> 
> I tried to compile the latest u-boot for Odroid U3.
> issue is that Ethernet is not able to detected.
> 
> Please let me know what need to enable USB Ethernet
> to support tftp boot.
> 
> Best Regards
> -Anand
> 
> ------
> U-Boot 2017.01-02075-g4386feb-dirty (Jan 12 2017 - 06:17:08 +0000)
> 
> CPU:   Exynos4412 @ 1 GHz
> Model: Odroid based on Exynos4412
> Board: Odroid based on Exynos4412
> Type:  u3
> DRAM:  2 GiB
> LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
> LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
> LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
> MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
> *** Warning - bad CRC, using default environment
> 
> Net:   No ethernet found.
> Hit any key to stop autoboot:  0
> Odroid #
> Odroid #
> Odroid # usb start
> starting USB...
> USB0:   USB EHCI 1.00
> scanning bus 0 for devices... 1 USB Device(s) found
>        scanning usb for ethernet devices... 0 Ethernet Device(s) found
> Odroid #
> Odroid #
> Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
> Odroid # usb start
> Odroid # usb info
> 1: Hub,  USB Revision 2.0
>  - u-boot EHCI Host Controller
>  - Class: Hub
>  - PacketSize: 64  Configurations: 1
>  - Vendor: 0x0000  Product 0x0000 Version 1.0
>    Configuration: 1
>    - Interfaces: 1 Self Powered 0mA
>      Interface: 0
>      - Alternate Setting 0, Endpoints: 1
>      - Class Hub
>      - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
> 
> Odroid # reset

Hi Anand,

It's an old problem and we have identified its root cause a long
time ago:

    https://lists.denx.de/pipermail/u-boot/2015-October/231061.html

Basically, a voltage regulator is not getting initialized because
a call to the board_usb_init() function was lost during the DM
conversion. You can try to compile U-Boot from my branch, it contains
the rebased fixes which I have been using all this time on my ODROID-X
board:

    https://github.com/ssvb/u-boot/commits/20170306-unbreak-odroid

I did all the initial investigation back in 2015, but tried to
delegate the actual bugfixing work to the ODROID board maintainer(s).
Apparently it did not fly and ODROID support is still broken.

If you can test my branch and confirm that it works on your ODROID-U3,
then I can maybe spend some time on making cleaner patches and ensuring
that they reach the U-Boot git repository.

Thanks!

-- 
Best regards,
Siarhei Siamashka

[U-Boot] Ethernet not detecting on Odroid u3

[Siarhei Siamashka]

On Mon, 6 Mar 2017 12:18:50 +0200
Siarhei Siamashka <siarhei.siamashka@gmail.com> wrote:

> On Thu, 12 Jan 2017 14:02:48 +0530
> Anand Moon <linux.amoon@gmail.com> wrote:
> 
> > Hi All,
> > 
> > I tried to compile the latest u-boot for Odroid U3.
> > issue is that Ethernet is not able to detected.
> > 
> > Please let me know what need to enable USB Ethernet
> > to support tftp boot.
> > 
> > Best Regards
> > -Anand
> > 
> > ------
> > U-Boot 2017.01-02075-g4386feb-dirty (Jan 12 2017 - 06:17:08 +0000)
> > 
> > CPU:   Exynos4412 @ 1 GHz
> > Model: Odroid based on Exynos4412
> > Board: Odroid based on Exynos4412
> > Type:  u3
> > DRAM:  2 GiB
> > LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
> > LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
> > LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
> > MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
> > *** Warning - bad CRC, using default environment
> > 
> > Net:   No ethernet found.
> > Hit any key to stop autoboot:  0
> > Odroid #
> > Odroid #
> > Odroid # usb start
> > starting USB...
> > USB0:   USB EHCI 1.00
> > scanning bus 0 for devices... 1 USB Device(s) found
> >        scanning usb for ethernet devices... 0 Ethernet Device(s) found
> > Odroid #
> > Odroid #
> > Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
> > Odroid # usb start
> > Odroid # usb info
> > 1: Hub,  USB Revision 2.0
> >  - u-boot EHCI Host Controller
> >  - Class: Hub
> >  - PacketSize: 64  Configurations: 1
> >  - Vendor: 0x0000  Product 0x0000 Version 1.0
> >    Configuration: 1
> >    - Interfaces: 1 Self Powered 0mA
> >      Interface: 0
> >      - Alternate Setting 0, Endpoints: 1
> >      - Class Hub
> >      - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
> > 
> > Odroid # reset  
> 
> Hi Anand,
> 
> It's an old problem and we have identified its root cause a long
> time ago:
> 
>     https://lists.denx.de/pipermail/u-boot/2015-October/231061.html
> 
> Basically, a voltage regulator is not getting initialized because
> a call to the board_usb_init() function was lost during the DM
> conversion. You can try to compile U-Boot from my branch, it contains
> the rebased fixes which I have been using all this time on my ODROID-X
> board:
> 
>     https://github.com/ssvb/u-boot/commits/20170306-unbreak-odroid
> 
> I did all the initial investigation back in 2015, but tried to
> delegate the actual bugfixing work to the ODROID board maintainer(s).
> Apparently it did not fly and ODROID support is still broken.
> 
> If you can test my branch and confirm that it works on your ODROID-U3,
> then I can maybe spend some time on making cleaner patches and ensuring
> that they reach the U-Boot git repository.
> 
> Thanks!

Hello again,

Anand Moon, considering no reply to my post, do I understand it
right that you are actually not very much interested in getting
this particular problem resolved in U-Boot?

These ODROID problems are relatively simple and don't require any
special skills or considerable efforts to resolve. The only issue
is that apparently almost nobody uses the mainline U-Boot on this
hardware and nobody gives rats about having it usable out of the
box.

I only have an ODROID-X board, which is a rather early and
short-lived revision. Again, if you or anybody else could step in
and take care of testing the fixes on other ODROID boards (X2 and
U3), then we could get ODROID boards working properly in the next
U-Boot release.


Jaehoon Chung, you seem to be listed as the current nominal ODROID
boards maintainer. But you don't seem to be doing anything other
than just making promises to check various things and then
disappearing for months/years:

    https://lists.denx.de/pipermail/u-boot/2017-January/277954.html
    https://lists.denx.de/pipermail/u-boot/2015-October/231023.html

Could you please explain what's going on and what are your plans
regarding ODROID boards support in U-Boot?

-- 
Best regards,
Siarhei Siamashka

[U-Boot] Ethernet not detecting on Odroid u3

[Jaehoon Chung]

On 03/14/2017 04:52 PM, Siarhei Siamashka wrote:
> On Mon, 6 Mar 2017 12:18:50 +0200
> Siarhei Siamashka <siarhei.siamashka@gmail.com> wrote:
> 
>> On Thu, 12 Jan 2017 14:02:48 +0530
>> Anand Moon <linux.amoon@gmail.com> wrote:
>>
>>> Hi All,
>>>
>>> I tried to compile the latest u-boot for Odroid U3.
>>> issue is that Ethernet is not able to detected.
>>>
>>> Please let me know what need to enable USB Ethernet
>>> to support tftp boot.
>>>
>>> Best Regards
>>> -Anand
>>>
>>> ------
>>> U-Boot 2017.01-02075-g4386feb-dirty (Jan 12 2017 - 06:17:08 +0000)
>>>
>>> CPU:   Exynos4412 @ 1 GHz
>>> Model: Odroid based on Exynos4412
>>> Board: Odroid based on Exynos4412
>>> Type:  u3
>>> DRAM:  2 GiB
>>> LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
>>> LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
>>> LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
>>> MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
>>> *** Warning - bad CRC, using default environment
>>>
>>> Net:   No ethernet found.
>>> Hit any key to stop autoboot:  0
>>> Odroid #
>>> Odroid #
>>> Odroid # usb start
>>> starting USB...
>>> USB0:   USB EHCI 1.00
>>> scanning bus 0 for devices... 1 USB Device(s) found
>>>        scanning usb for ethernet devices... 0 Ethernet Device(s) found
>>> Odroid #
>>> Odroid #
>>> Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
>>> Odroid # usb start
>>> Odroid # usb info
>>> 1: Hub,  USB Revision 2.0
>>>  - u-boot EHCI Host Controller
>>>  - Class: Hub
>>>  - PacketSize: 64  Configurations: 1
>>>  - Vendor: 0x0000  Product 0x0000 Version 1.0
>>>    Configuration: 1
>>>    - Interfaces: 1 Self Powered 0mA
>>>      Interface: 0
>>>      - Alternate Setting 0, Endpoints: 1
>>>      - Class Hub
>>>      - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
>>>
>>> Odroid # reset  
>>
>> Hi Anand,
>>
>> It's an old problem and we have identified its root cause a long
>> time ago:
>>
>>     https://lists.denx.de/pipermail/u-boot/2015-October/231061.html
>>
>> Basically, a voltage regulator is not getting initialized because
>> a call to the board_usb_init() function was lost during the DM
>> conversion. You can try to compile U-Boot from my branch, it contains
>> the rebased fixes which I have been using all this time on my ODROID-X
>> board:
>>
>>     https://github.com/ssvb/u-boot/commits/20170306-unbreak-odroid
>>
>> I did all the initial investigation back in 2015, but tried to
>> delegate the actual bugfixing work to the ODROID board maintainer(s).
>> Apparently it did not fly and ODROID support is still broken.
>>
>> If you can test my branch and confirm that it works on your ODROID-U3,
>> then I can maybe spend some time on making cleaner patches and ensuring
>> that they reach the U-Boot git repository.
>>
>> Thanks!
> 
> Hello again,
> 
> Anand Moon, considering no reply to my post, do I understand it
> right that you are actually not very much interested in getting
> this particular problem resolved in U-Boot?
> 
> These ODROID problems are relatively simple and don't require any
> special skills or considerable efforts to resolve. The only issue
> is that apparently almost nobody uses the mainline U-Boot on this
> hardware and nobody gives rats about having it usable out of the
> box.
> 
> I only have an ODROID-X board, which is a rather early and
> short-lived revision. Again, if you or anybody else could step in
> and take care of testing the fixes on other ODROID boards (X2 and
> U3), then we could get ODROID boards working properly in the next
> U-Boot release.
> 
> 
> Jaehoon Chung, you seem to be listed as the current nominal ODROID
> boards maintainer. But you don't seem to be doing anything other
> than just making promises to check various things and then
> disappearing for months/years:

Actually, i had forgotten this mail...When i check the patches, first i'm looking at patchwork.
And I'm remembering what i do and need. Right, it's my mistake for forgetting it.

Disappearing for months/years? If i decided to do nothing, i might not reply anything to u-boot mailing list.
If you send the polite reminding ping mail, maybe i will really apologize to you. but now i don't have those mind.
You're regarding to me like nothing to do...
> 
>     https://lists.denx.de/pipermail/u-boot/2017-January/277954.html
>     https://lists.denx.de/pipermail/u-boot/2015-October/231023.html

I can't access this URL,,so i don't know what you added..

> 
> Could you please explain what's going on and what are your plans
> regarding ODROID boards support in U-Boot?

I'm preparing to covert to DM from legacy..For converting DM, I'm doing step by step for samsung SoCs.
Goni -> Universal210 - > Trats -> Trats2 -> Odroid also..
You can see my patches for goni, universal210, trats..

I'm not sure this problem is fixed or not..if you want to fix it, i will do it..but not right now.
I keep going my current task..

Best Regards,
Jaehoon Chung

> 

[U-Boot] Ethernet not detecting on Odroid u3

[Anand Moon]

Hi Siarhei/Jaehoon

On 14 March 2017 at 14:31, Jaehoon Chung <jh80.chung@samsung.com> wrote:
> On 03/14/2017 04:52 PM, Siarhei Siamashka wrote:
>> On Mon, 6 Mar 2017 12:18:50 +0200
>> Siarhei Siamashka <siarhei.siamashka@gmail.com> wrote:
>>
>>> On Thu, 12 Jan 2017 14:02:48 +0530
>>> Anand Moon <linux.amoon@gmail.com> wrote:
>>>
>>>> Hi All,
>>>>
>>>> I tried to compile the latest u-boot for Odroid U3.
>>>> issue is that Ethernet is not able to detected.
>>>>
>>>> Please let me know what need to enable USB Ethernet
>>>> to support tftp boot.
>>>>
>>>> Best Regards
>>>> -Anand
>>>>
>>>> ------
>>>> U-Boot 2017.01-02075-g4386feb-dirty (Jan 12 2017 - 06:17:08 +0000)
>>>>
>>>> CPU:   Exynos4412 @ 1 GHz
>>>> Model: Odroid based on Exynos4412
>>>> Board: Odroid based on Exynos4412
>>>> Type:  u3
>>>> DRAM:  2 GiB
>>>> LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
>>>> LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
>>>> LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
>>>> MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
>>>> *** Warning - bad CRC, using default environment
>>>>
>>>> Net:   No ethernet found.
>>>> Hit any key to stop autoboot:  0
>>>> Odroid #
>>>> Odroid #
>>>> Odroid # usb start
>>>> starting USB...
>>>> USB0:   USB EHCI 1.00
>>>> scanning bus 0 for devices... 1 USB Device(s) found
>>>>        scanning usb for ethernet devices... 0 Ethernet Device(s) found
>>>> Odroid #
>>>> Odroid #
>>>> Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
>>>> Odroid # usb start
>>>> Odroid # usb info
>>>> 1: Hub,  USB Revision 2.0
>>>>  - u-boot EHCI Host Controller
>>>>  - Class: Hub
>>>>  - PacketSize: 64  Configurations: 1
>>>>  - Vendor: 0x0000  Product 0x0000 Version 1.0
>>>>    Configuration: 1
>>>>    - Interfaces: 1 Self Powered 0mA
>>>>      Interface: 0
>>>>      - Alternate Setting 0, Endpoints: 1
>>>>      - Class Hub
>>>>      - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
>>>>
>>>> Odroid # reset
>>>
>>> Hi Anand,
>>>
>>> It's an old problem and we have identified its root cause a long
>>> time ago:
>>>
>>>     https://lists.denx.de/pipermail/u-boot/2015-October/231061.html
>>>
>>> Basically, a voltage regulator is not getting initialized because
>>> a call to the board_usb_init() function was lost during the DM
>>> conversion. You can try to compile U-Boot from my branch, it contains
>>> the rebased fixes which I have been using all this time on my ODROID-X
>>> board:
>>>
>>>     https://github.com/ssvb/u-boot/commits/20170306-unbreak-odroid
>>>
>>> I did all the initial investigation back in 2015, but tried to
>>> delegate the actual bugfixing work to the ODROID board maintainer(s).
>>> Apparently it did not fly and ODROID support is still broken.
>>>
>>> If you can test my branch and confirm that it works on your ODROID-U3,
>>> then I can maybe spend some time on making cleaner patches and ensuring
>>> that they reach the U-Boot git repository.
>>>
>>> Thanks!
>>
>> Hello again,
>>
>> Anand Moon, considering no reply to my post, do I understand it
>> right that you are actually not very much interested in getting
>> this particular problem resolved in U-Boot?
>>
>> These ODROID problems are relatively simple and don't require any
>> special skills or considerable efforts to resolve. The only issue
>> is that apparently almost nobody uses the mainline U-Boot on this
>> hardware and nobody gives rats about having it usable out of the
>> box.
>>
>> I only have an ODROID-X board, which is a rather early and
>> short-lived revision. Again, if you or anybody else could step in
>> and take care of testing the fixes on other ODROID boards (X2 and
>> U3), then we could get ODROID boards working properly in the next
>> U-Boot release.
>>
>>
>> Jaehoon Chung, you seem to be listed as the current nominal ODROID
>> boards maintainer. But you don't seem to be doing anything other
>> than just making promises to check various things and then
>> disappearing for months/years:
>
> Actually, i had forgotten this mail...When i check the patches, first i'm looking at patchwork.
> And I'm remembering what i do and need. Right, it's my mistake for forgetting it.
>
> Disappearing for months/years? If i decided to do nothing, i might not reply anything to u-boot mailing list.
> If you send the polite reminding ping mail, maybe i will really apologize to you. but now i don't have those mind.
> You're regarding to me like nothing to do...
>>
>>     https://lists.denx.de/pipermail/u-boot/2017-January/277954.html
>>     https://lists.denx.de/pipermail/u-boot/2015-October/231023.html
>
> I can't access this URL,,so i don't know what you added..
>
>>
>> Could you please explain what's going on and what are your plans
>> regarding ODROID boards support in U-Boot?
>
> I'm preparing to covert to DM from legacy..For converting DM, I'm doing step by step for samsung SoCs.
> Goni -> Universal210 - > Trats -> Trats2 -> Odroid also..
> You can see my patches for goni, universal210, trats..
>
> I'm not sure this problem is fixed or not..if you want to fix it, i will do it..but not right now.
> I keep going my current task..
>
> Best Regards,
> Jaehoon Chung
>

I might have missed early email. I would like help resolve this issue
and investigate on the inputs you have shared.

Best Regards
-Anand Moon

[U-Boot] Ethernet not detecting on Odroid u3

[Jaehoon Chung]

Hi Anand,

On 03/14/2017 06:14 PM, Anand Moon wrote:
> Hi Siarhei/Jaehoon
> 
> On 14 March 2017 at 14:31, Jaehoon Chung <jh80.chung@samsung.com> wrote:
>> On 03/14/2017 04:52 PM, Siarhei Siamashka wrote:
>>> On Mon, 6 Mar 2017 12:18:50 +0200
>>> Siarhei Siamashka <siarhei.siamashka@gmail.com> wrote:
>>>
>>>> On Thu, 12 Jan 2017 14:02:48 +0530
>>>> Anand Moon <linux.amoon@gmail.com> wrote:
>>>>
>>>>> Hi All,
>>>>>
>>>>> I tried to compile the latest u-boot for Odroid U3.
>>>>> issue is that Ethernet is not able to detected.
>>>>>
>>>>> Please let me know what need to enable USB Ethernet
>>>>> to support tftp boot.
>>>>>
>>>>> Best Regards
>>>>> -Anand
>>>>>
>>>>> ------
>>>>> U-Boot 2017.01-02075-g4386feb-dirty (Jan 12 2017 - 06:17:08 +0000)
>>>>>
>>>>> CPU:   Exynos4412 @ 1 GHz
>>>>> Model: Odroid based on Exynos4412
>>>>> Board: Odroid based on Exynos4412
>>>>> Type:  u3
>>>>> DRAM:  2 GiB
>>>>> LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
>>>>> LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
>>>>> LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
>>>>> MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
>>>>> *** Warning - bad CRC, using default environment
>>>>>
>>>>> Net:   No ethernet found.
>>>>> Hit any key to stop autoboot:  0
>>>>> Odroid #
>>>>> Odroid #
>>>>> Odroid # usb start
>>>>> starting USB...
>>>>> USB0:   USB EHCI 1.00
>>>>> scanning bus 0 for devices... 1 USB Device(s) found
>>>>>        scanning usb for ethernet devices... 0 Ethernet Device(s) found
>>>>> Odroid #
>>>>> Odroid #
>>>>> Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
>>>>> Odroid # usb start
>>>>> Odroid # usb info
>>>>> 1: Hub,  USB Revision 2.0
>>>>>  - u-boot EHCI Host Controller
>>>>>  - Class: Hub
>>>>>  - PacketSize: 64  Configurations: 1
>>>>>  - Vendor: 0x0000  Product 0x0000 Version 1.0
>>>>>    Configuration: 1
>>>>>    - Interfaces: 1 Self Powered 0mA
>>>>>      Interface: 0
>>>>>      - Alternate Setting 0, Endpoints: 1
>>>>>      - Class Hub
>>>>>      - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
>>>>>
>>>>> Odroid # reset
>>>>
>>>> Hi Anand,
>>>>
>>>> It's an old problem and we have identified its root cause a long
>>>> time ago:
>>>>
>>>>     https://lists.denx.de/pipermail/u-boot/2015-October/231061.html
>>>>
>>>> Basically, a voltage regulator is not getting initialized because
>>>> a call to the board_usb_init() function was lost during the DM
>>>> conversion. You can try to compile U-Boot from my branch, it contains
>>>> the rebased fixes which I have been using all this time on my ODROID-X
>>>> board:
>>>>
>>>>     https://github.com/ssvb/u-boot/commits/20170306-unbreak-odroid
>>>>
>>>> I did all the initial investigation back in 2015, but tried to
>>>> delegate the actual bugfixing work to the ODROID board maintainer(s).
>>>> Apparently it did not fly and ODROID support is still broken.
>>>>
>>>> If you can test my branch and confirm that it works on your ODROID-U3,
>>>> then I can maybe spend some time on making cleaner patches and ensuring
>>>> that they reach the U-Boot git repository.
>>>>
>>>> Thanks!
>>>
>>> Hello again,
>>>
>>> Anand Moon, considering no reply to my post, do I understand it
>>> right that you are actually not very much interested in getting
>>> this particular problem resolved in U-Boot?
>>>
>>> These ODROID problems are relatively simple and don't require any
>>> special skills or considerable efforts to resolve. The only issue
>>> is that apparently almost nobody uses the mainline U-Boot on this
>>> hardware and nobody gives rats about having it usable out of the
>>> box.
>>>
>>> I only have an ODROID-X board, which is a rather early and
>>> short-lived revision. Again, if you or anybody else could step in
>>> and take care of testing the fixes on other ODROID boards (X2 and
>>> U3), then we could get ODROID boards working properly in the next
>>> U-Boot release.
>>>
>>>
>>> Jaehoon Chung, you seem to be listed as the current nominal ODROID
>>> boards maintainer. But you don't seem to be doing anything other
>>> than just making promises to check various things and then
>>> disappearing for months/years:
>>
>> Actually, i had forgotten this mail...When i check the patches, first i'm looking at patchwork.
>> And I'm remembering what i do and need. Right, it's my mistake for forgetting it.
>>
>> Disappearing for months/years? If i decided to do nothing, i might not reply anything to u-boot mailing list.
>> If you send the polite reminding ping mail, maybe i will really apologize to you. but now i don't have those mind.
>> You're regarding to me like nothing to do...
>>>
>>>     https://lists.denx.de/pipermail/u-boot/2017-January/277954.html
>>>     https://lists.denx.de/pipermail/u-boot/2015-October/231023.html
>>
>> I can't access this URL,,so i don't know what you added..
>>
>>>
>>> Could you please explain what's going on and what are your plans
>>> regarding ODROID boards support in U-Boot?
>>
>> I'm preparing to covert to DM from legacy..For converting DM, I'm doing step by step for samsung SoCs.
>> Goni -> Universal210 - > Trats -> Trats2 -> Odroid also..
>> You can see my patches for goni, universal210, trats..
>>
>> I'm not sure this problem is fixed or not..if you want to fix it, i will do it..but not right now.
>> I keep going my current task..
>>
>> Best Regards,
>> Jaehoon Chung
>>
> 
> I might have missed early email. I would like help resolve this issue
> and investigate on the inputs you have shared.

I didn't receive some email about this...I can't find you and Siarhei's mail threads in my mailbox.

Best Regards,
Jaehoon Chung

> 
> Best Regards
> -Anand Moon
> 
> 

[U-Boot] Ethernet not detecting on Odroid u3

[Siarhei Siamashka]

On Tue, 14 Mar 2017 14:44:26 +0530
Anand Moon <linux.amoon@gmail.com> wrote:

> Hi Siarhei/Jaehoon
> 
> On 14 March 2017 at 14:31, Jaehoon Chung <jh80.chung@samsung.com> wrote:
> > On 03/14/2017 04:52 PM, Siarhei Siamashka wrote:  
> >> On Mon, 6 Mar 2017 12:18:50 +0200
> >> Siarhei Siamashka <siarhei.siamashka@gmail.com> wrote:
> >>  
> >>> On Thu, 12 Jan 2017 14:02:48 +0530
> >>> Anand Moon <linux.amoon@gmail.com> wrote:
> >>>  
> >>>> Hi All,
> >>>>
> >>>> I tried to compile the latest u-boot for Odroid U3.
> >>>> issue is that Ethernet is not able to detected.
> >>>>
> >>>> Please let me know what need to enable USB Ethernet
> >>>> to support tftp boot.
> >>>>
> >>>> Best Regards
> >>>> -Anand
> >>>>
> >>>> ------
> >>>> U-Boot 2017.01-02075-g4386feb-dirty (Jan 12 2017 - 06:17:08 +0000)
> >>>>
> >>>> CPU:   Exynos4412 @ 1 GHz
> >>>> Model: Odroid based on Exynos4412
> >>>> Board: Odroid based on Exynos4412
> >>>> Type:  u3
> >>>> DRAM:  2 GiB
> >>>> LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
> >>>> LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
> >>>> LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
> >>>> MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
> >>>> *** Warning - bad CRC, using default environment
> >>>>
> >>>> Net:   No ethernet found.
> >>>> Hit any key to stop autoboot:  0
> >>>> Odroid #
> >>>> Odroid #
> >>>> Odroid # usb start
> >>>> starting USB...
> >>>> USB0:   USB EHCI 1.00
> >>>> scanning bus 0 for devices... 1 USB Device(s) found
> >>>>        scanning usb for ethernet devices... 0 Ethernet Device(s) found
> >>>> Odroid #
> >>>> Odroid #
> >>>> Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
> >>>> Odroid # usb start
> >>>> Odroid # usb info
> >>>> 1: Hub,  USB Revision 2.0
> >>>>  - u-boot EHCI Host Controller
> >>>>  - Class: Hub
> >>>>  - PacketSize: 64  Configurations: 1
> >>>>  - Vendor: 0x0000  Product 0x0000 Version 1.0
> >>>>    Configuration: 1
> >>>>    - Interfaces: 1 Self Powered 0mA
> >>>>      Interface: 0
> >>>>      - Alternate Setting 0, Endpoints: 1
> >>>>      - Class Hub
> >>>>      - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
> >>>>
> >>>> Odroid # reset  
> >>>
> >>> Hi Anand,
> >>>
> >>> It's an old problem and we have identified its root cause a long
> >>> time ago:
> >>>
> >>>     https://lists.denx.de/pipermail/u-boot/2015-October/231061.html
> >>>
> >>> Basically, a voltage regulator is not getting initialized because
> >>> a call to the board_usb_init() function was lost during the DM
> >>> conversion. You can try to compile U-Boot from my branch, it contains
> >>> the rebased fixes which I have been using all this time on my ODROID-X
> >>> board:
> >>>
> >>>     https://github.com/ssvb/u-boot/commits/20170306-unbreak-odroid
> >>>
> >>> I did all the initial investigation back in 2015, but tried to
> >>> delegate the actual bugfixing work to the ODROID board maintainer(s).
> >>> Apparently it did not fly and ODROID support is still broken.
> >>>
> >>> If you can test my branch and confirm that it works on your ODROID-U3,
> >>> then I can maybe spend some time on making cleaner patches and ensuring
> >>> that they reach the U-Boot git repository.
> >>>
> >>> Thanks!  
> >>
> >> Hello again,
> >>
> >> Anand Moon, considering no reply to my post, do I understand it
> >> right that you are actually not very much interested in getting
> >> this particular problem resolved in U-Boot?
> >>
> >> These ODROID problems are relatively simple and don't require any
> >> special skills or considerable efforts to resolve. The only issue
> >> is that apparently almost nobody uses the mainline U-Boot on this
> >> hardware and nobody gives rats about having it usable out of the
> >> box.
> >>
> >> I only have an ODROID-X board, which is a rather early and
> >> short-lived revision. Again, if you or anybody else could step in
> >> and take care of testing the fixes on other ODROID boards (X2 and
> >> U3), then we could get ODROID boards working properly in the next
> >> U-Boot release.
> >>
> >>
> >> Jaehoon Chung, you seem to be listed as the current nominal ODROID
> >> boards maintainer. But you don't seem to be doing anything other
> >> than just making promises to check various things and then
> >> disappearing for months/years:  
> >
> > Actually, i had forgotten this mail...When i check the patches, first i'm looking at patchwork.
> > And I'm remembering what i do and need. Right, it's my mistake for forgetting it.
> >
> > Disappearing for months/years? If i decided to do nothing, i might not reply anything to u-boot mailing list.
> > If you send the polite reminding ping mail, maybe i will really apologize to you. but now i don't have those mind.
> > You're regarding to me like nothing to do...  
> >>
> >>     https://lists.denx.de/pipermail/u-boot/2017-January/277954.html
> >>     https://lists.denx.de/pipermail/u-boot/2015-October/231023.html  
> >
> > I can't access this URL,,so i don't know what you added..
> >  
> >>
> >> Could you please explain what's going on and what are your plans
> >> regarding ODROID boards support in U-Boot?  
> >
> > I'm preparing to covert to DM from legacy..For converting DM, I'm doing step by step for samsung SoCs.
> > Goni -> Universal210 - > Trats -> Trats2 -> Odroid also..
> > You can see my patches for goni, universal210, trats..
> >
> > I'm not sure this problem is fixed or not..if you want to fix it, i will do it..but not right now.
> > I keep going my current task..
> >
> > Best Regards,
> > Jaehoon Chung
> >  
> 
> I might have missed early email. I would like help resolve this issue
> and investigate on the inputs you have shared.

You can just clone my git branch:

   git clone -b 20170306-unbreak-odroid https://github.com/ssvb/u-boot.git

Then compile it and try to boot on your ODROID-U3 board. Check if it
boots and if the Ethernet is working properly. And finally report
the results. If it works, then I will send cleaned up versions of
these patches to the U-Boot mailing list.

Thanks!

-- 
Best regards,
Siarhei Siamashka

[U-Boot] Ethernet not detecting on Odroid u3

[Siarhei Siamashka]

On Tue, 14 Mar 2017 18:01:11 +0900
Jaehoon Chung <jh80.chung@samsung.com> wrote:

> On 03/14/2017 04:52 PM, Siarhei Siamashka wrote:
> > On Mon, 6 Mar 2017 12:18:50 +0200
> > Siarhei Siamashka <siarhei.siamashka@gmail.com> wrote:
> >   
> >> On Thu, 12 Jan 2017 14:02:48 +0530
> >> Anand Moon <linux.amoon@gmail.com> wrote:
> >>  
> >>> Hi All,
> >>>
> >>> I tried to compile the latest u-boot for Odroid U3.
> >>> issue is that Ethernet is not able to detected.
> >>>
> >>> Please let me know what need to enable USB Ethernet
> >>> to support tftp boot.
> >>>
> >>> Best Regards
> >>> -Anand
> >>>
> >>> ------
> >>> U-Boot 2017.01-02075-g4386feb-dirty (Jan 12 2017 - 06:17:08 +0000)
> >>>
> >>> CPU:   Exynos4412 @ 1 GHz
> >>> Model: Odroid based on Exynos4412
> >>> Board: Odroid based on Exynos4412
> >>> Type:  u3
> >>> DRAM:  2 GiB
> >>> LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
> >>> LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
> >>> LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
> >>> MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
> >>> *** Warning - bad CRC, using default environment
> >>>
> >>> Net:   No ethernet found.
> >>> Hit any key to stop autoboot:  0
> >>> Odroid #
> >>> Odroid #
> >>> Odroid # usb start
> >>> starting USB...
> >>> USB0:   USB EHCI 1.00
> >>> scanning bus 0 for devices... 1 USB Device(s) found
> >>>        scanning usb for ethernet devices... 0 Ethernet Device(s) found
> >>> Odroid #
> >>> Odroid #
> >>> Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
> >>> Odroid # usb start
> >>> Odroid # usb info
> >>> 1: Hub,  USB Revision 2.0
> >>>  - u-boot EHCI Host Controller
> >>>  - Class: Hub
> >>>  - PacketSize: 64  Configurations: 1
> >>>  - Vendor: 0x0000  Product 0x0000 Version 1.0
> >>>    Configuration: 1
> >>>    - Interfaces: 1 Self Powered 0mA
> >>>      Interface: 0
> >>>      - Alternate Setting 0, Endpoints: 1
> >>>      - Class Hub
> >>>      - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
> >>>
> >>> Odroid # reset    
> >>
> >> Hi Anand,
> >>
> >> It's an old problem and we have identified its root cause a long
> >> time ago:
> >>
> >>     https://lists.denx.de/pipermail/u-boot/2015-October/231061.html
> >>
> >> Basically, a voltage regulator is not getting initialized because
> >> a call to the board_usb_init() function was lost during the DM
> >> conversion. You can try to compile U-Boot from my branch, it contains
> >> the rebased fixes which I have been using all this time on my ODROID-X
> >> board:
> >>
> >>     https://github.com/ssvb/u-boot/commits/20170306-unbreak-odroid
> >>
> >> I did all the initial investigation back in 2015, but tried to
> >> delegate the actual bugfixing work to the ODROID board maintainer(s).
> >> Apparently it did not fly and ODROID support is still broken.
> >>
> >> If you can test my branch and confirm that it works on your ODROID-U3,
> >> then I can maybe spend some time on making cleaner patches and ensuring
> >> that they reach the U-Boot git repository.
> >>
> >> Thanks!  
> > 
> > Hello again,
> > 
> > Anand Moon, considering no reply to my post, do I understand it
> > right that you are actually not very much interested in getting
> > this particular problem resolved in U-Boot?
> > 
> > These ODROID problems are relatively simple and don't require any
> > special skills or considerable efforts to resolve. The only issue
> > is that apparently almost nobody uses the mainline U-Boot on this
> > hardware and nobody gives rats about having it usable out of the
> > box.
> > 
> > I only have an ODROID-X board, which is a rather early and
> > short-lived revision. Again, if you or anybody else could step in
> > and take care of testing the fixes on other ODROID boards (X2 and
> > U3), then we could get ODROID boards working properly in the next
> > U-Boot release.
> > 
> > 
> > Jaehoon Chung, you seem to be listed as the current nominal ODROID
> > boards maintainer. But you don't seem to be doing anything other
> > than just making promises to check various things and then
> > disappearing for months/years:  
> 
> Actually, i had forgotten this mail...When i check the patches, first
> i'm looking at patchwork. And I'm remembering what i do and need.
> Right, it's my mistake for forgetting it.
> 
> Disappearing for months/years?

Yes, exactly. And that's what has already happened twice.

"Once is happenstance, twice is coincidence, the third time it's
enemy action" ;-) But don't take it too seriously. I have
no intention to blame anybody because this is not moving us
anywhere.

> If i decided to do nothing, i might not reply anything to u-boot
> mailing list.

BTW, thanks for replying.

> If you send the polite reminding ping mail, maybe i will really
> apologize to you. but now i don't have those mind.
> You're regarding to me like nothing to do...
> > 
> >     https://lists.denx.de/pipermail/u-boot/2017-January/277954.html
> >     https://lists.denx.de/pipermail/u-boot/2015-October/231023.html  
> 
> I can't access this URL,,so i don't know what you added..

This URL is the official U-Boot mailing list archive. Can you
explain what's going on and why you can't access it? The mailing
list admin might be interested in resolving issues (if there
are any).

> > 
> > Could you please explain what's going on and what are your plans
> > regarding ODROID boards support in U-Boot?  
> 
> I'm preparing to covert to DM from legacy..For converting DM,
> I'm doing step by step for samsung SoCs.
> Goni -> Universal210 - > Trats -> Trats2 -> Odroid also..
> You can see my patches for goni, universal210, trats..

Well, looks like you have a lot on your plate. It's not
surprising that you have no time for maintaining Exynos
based ODROID boards.

Still it's only my opinion, but it looks like you got your
priorities wrong. The DM conversion is more like a refactoring
and code massaging activity. It offers exactly nothing to the
end users.

Yes, the idea is that these refactoring changes can make the
code cleaner, more reusable and easier to maintain, which may
result in better quality and reliability in the long run.
Yada yada bla bla bla.

However we have a bitrotten crap in the mainline U-Boot right
now (both MMC and USB are buggered on Exynos based ODROID boards)
and it has been this way since at least 2015. Yes, people are
already used to this and accept it as a norm, so they don't
complain much. I don't know what they are using right now on
their hardware. Maybe the Hardkernel's bootloader? Or an old
U-Boot release?

IMHO making sure that the *current* U-Boot release works
correctly should be the first priority of the ODROID boards
maintainer. Rather than entertaining himself with a fun DM
stuff...

> I'm not sure this problem is fixed or not..

You could just boot your ODROID-U3 board and easily check whether
the Ethernet bug is still there or not. That's what you have
actually promised back in January.

> if you want to fix it, i will do it..but not right now.
> I keep going my current task..

OK, I'll take care of it. But as I said, I would need
ODROID-X2 and ODROID-U3 owners to test the fixes because
I don't have a full set of hardware.

-- 
Best regards,
Siarhei Siamashka

[U-Boot] Ethernet not detecting on Odroid u3

[Anand Moon]

Hi Siarhei

On 14 March 2017 at 15:24, Siarhei Siamashka
<siarhei.siamashka@gmail.com> wrote:
> On Tue, 14 Mar 2017 14:44:26 +0530
> Anand Moon <linux.amoon@gmail.com> wrote:
>
>> Hi Siarhei/Jaehoon
>>
>> On 14 March 2017 at 14:31, Jaehoon Chung <jh80.chung@samsung.com> wrote:
>> > On 03/14/2017 04:52 PM, Siarhei Siamashka wrote:
>> >> On Mon, 6 Mar 2017 12:18:50 +0200
>> >> Siarhei Siamashka <siarhei.siamashka@gmail.com> wrote:
>> >>
>> >>> On Thu, 12 Jan 2017 14:02:48 +0530
>> >>> Anand Moon <linux.amoon@gmail.com> wrote:
>> >>>
>> >>>> Hi All,
>> >>>>
>> >>>> I tried to compile the latest u-boot for Odroid U3.
>> >>>> issue is that Ethernet is not able to detected.
>> >>>>
>> >>>> Please let me know what need to enable USB Ethernet
>> >>>> to support tftp boot.
>> >>>>
>> >>>> Best Regards
>> >>>> -Anand
>> >>>>
>> >>>> ------
>> >>>> U-Boot 2017.01-02075-g4386feb-dirty (Jan 12 2017 - 06:17:08 +0000)
>> >>>>
>> >>>> CPU:   Exynos4412 @ 1 GHz
>> >>>> Model: Odroid based on Exynos4412
>> >>>> Board: Odroid based on Exynos4412
>> >>>> Type:  u3
>> >>>> DRAM:  2 GiB
>> >>>> LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
>> >>>> LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
>> >>>> LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
>> >>>> MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
>> >>>> *** Warning - bad CRC, using default environment
>> >>>>
>> >>>> Net:   No ethernet found.
>> >>>> Hit any key to stop autoboot:  0
>> >>>> Odroid #
>> >>>> Odroid #
>> >>>> Odroid # usb start
>> >>>> starting USB...
>> >>>> USB0:   USB EHCI 1.00
>> >>>> scanning bus 0 for devices... 1 USB Device(s) found
>> >>>>        scanning usb for ethernet devices... 0 Ethernet Device(s) found
>> >>>> Odroid #
>> >>>> Odroid #
>> >>>> Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
>> >>>> Odroid # usb start
>> >>>> Odroid # usb info
>> >>>> 1: Hub,  USB Revision 2.0
>> >>>>  - u-boot EHCI Host Controller
>> >>>>  - Class: Hub
>> >>>>  - PacketSize: 64  Configurations: 1
>> >>>>  - Vendor: 0x0000  Product 0x0000 Version 1.0
>> >>>>    Configuration: 1
>> >>>>    - Interfaces: 1 Self Powered 0mA
>> >>>>      Interface: 0
>> >>>>      - Alternate Setting 0, Endpoints: 1
>> >>>>      - Class Hub
>> >>>>      - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
>> >>>>
>> >>>> Odroid # reset
>> >>>
>> >>> Hi Anand,
>> >>>
>> >>> It's an old problem and we have identified its root cause a long
>> >>> time ago:
>> >>>
>> >>>     https://lists.denx.de/pipermail/u-boot/2015-October/231061.html
>> >>>
>> >>> Basically, a voltage regulator is not getting initialized because
>> >>> a call to the board_usb_init() function was lost during the DM
>> >>> conversion. You can try to compile U-Boot from my branch, it contains
>> >>> the rebased fixes which I have been using all this time on my ODROID-X
>> >>> board:
>> >>>
>> >>>     https://github.com/ssvb/u-boot/commits/20170306-unbreak-odroid
>> >>>
>> >>> I did all the initial investigation back in 2015, but tried to
>> >>> delegate the actual bugfixing work to the ODROID board maintainer(s).
>> >>> Apparently it did not fly and ODROID support is still broken.
>> >>>
>> >>> If you can test my branch and confirm that it works on your ODROID-U3,
>> >>> then I can maybe spend some time on making cleaner patches and ensuring
>> >>> that they reach the U-Boot git repository.
>> >>>
>> >>> Thanks!
>> >>
>> >> Hello again,
>> >>
>> >> Anand Moon, considering no reply to my post, do I understand it
>> >> right that you are actually not very much interested in getting
>> >> this particular problem resolved in U-Boot?
>> >>
>> >> These ODROID problems are relatively simple and don't require any
>> >> special skills or considerable efforts to resolve. The only issue
>> >> is that apparently almost nobody uses the mainline U-Boot on this
>> >> hardware and nobody gives rats about having it usable out of the
>> >> box.
>> >>
>> >> I only have an ODROID-X board, which is a rather early and
>> >> short-lived revision. Again, if you or anybody else could step in
>> >> and take care of testing the fixes on other ODROID boards (X2 and
>> >> U3), then we could get ODROID boards working properly in the next
>> >> U-Boot release.
>> >>
>> >>
>> >> Jaehoon Chung, you seem to be listed as the current nominal ODROID
>> >> boards maintainer. But you don't seem to be doing anything other
>> >> than just making promises to check various things and then
>> >> disappearing for months/years:
>> >
>> > Actually, i had forgotten this mail...When i check the patches, first i'm looking at patchwork.
>> > And I'm remembering what i do and need. Right, it's my mistake for forgetting it.
>> >
>> > Disappearing for months/years? If i decided to do nothing, i might not reply anything to u-boot mailing list.
>> > If you send the polite reminding ping mail, maybe i will really apologize to you. but now i don't have those mind.
>> > You're regarding to me like nothing to do...
>> >>
>> >>     https://lists.denx.de/pipermail/u-boot/2017-January/277954.html
>> >>     https://lists.denx.de/pipermail/u-boot/2015-October/231023.html
>> >
>> > I can't access this URL,,so i don't know what you added..
>> >
>> >>
>> >> Could you please explain what's going on and what are your plans
>> >> regarding ODROID boards support in U-Boot?
>> >
>> > I'm preparing to covert to DM from legacy..For converting DM, I'm doing step by step for samsung SoCs.
>> > Goni -> Universal210 - > Trats -> Trats2 -> Odroid also..
>> > You can see my patches for goni, universal210, trats..
>> >
>> > I'm not sure this problem is fixed or not..if you want to fix it, i will do it..but not right now.
>> > I keep going my current task..
>> >
>> > Best Regards,
>> > Jaehoon Chung
>> >
>>
>> I might have missed early email. I would like help resolve this issue
>> and investigate on the inputs you have shared.
>
> You can just clone my git branch:
>
>    git clone -b 20170306-unbreak-odroid https://github.com/ssvb/u-boot.git
>
> Then compile it and try to boot on your ODROID-U3 board. Check if it
> boots and if the Ethernet is working properly. And finally report
> the results. If it works, then I will send cleaned up versions of
> these patches to the U-Boot mailing list.
>
[snip]

I dont feel the hack works perfectly.

I compiled your u-boot tree and could not load the kernel.

[0] git clone -b 20170306-unbreak-odroid https://github.com/ssvb/u-boot.git

------------------------------------------------------------------------------------
U-Boot 2017.03-rc3-00006-g3dd6fdb (Mar 14 2017 - 13:54:08 +0000)

CPU:   Exynos4412 @ 1 GHz
Model: Odroid based on Exynos4412
Board: Odroid based on Exynos4412
Type:  u3
DRAM:  2 GiB
LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
*** Warning - bad CRC, using default environment

Net:   No ethernet found.
Hit any key to stop autoboot:  0
reading boot.scr
3174 bytes read in 49 ms (62.5 KiB/s)
## Executing script at 42000000
Found kernel image: zImage
reading exynos4412-odroidu3.dtb
54561 bytes read in 23 ms (2.3 MiB/s)
Found ramdisk image.
reading uInitrd
9873974 bytes read in 679 ms (13.9 MiB/s)
reading zImage
6552912 bytes read in 460 ms (13.6 MiB/s)
Kernel image @ 0x40007fc0 [ 0x000000 - 0x63fd50 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   uInitrdu3
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    9873910 Bytes = 9.4 MiB
   Load Address: 42000000
   Entry Point:  42000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 40800000
   Booting using the fdt blob at 0x40800000
   Loading Ramdisk to ba4d6000, end bae409f6 ... OK
   Loading Device Tree to ba4c5000, end ba4d5520 ... OK

Starting kernel ...
------------------------------------------------------------------------------------
After that I had to remove my zImage and exynos4412-odroidu3.dtb to
enter into u-boot prompt to manually test.
------------------------------------------------------------------------------------
U-Boot 2017.03-rc3-00006-g3dd6fdb (Mar 14 2017 - 13:54:08 +0000)

CPU:   Exynos4412 @ 1 GHz
Model: Odroid based on Exynos4412
Board: Odroid based on Exynos4412
Type:  u3
DRAM:  2 GiB
LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
*** Warning - bad CRC, using default environment

Net:   No ethernet found.
Hit any key to stop autoboot:  0
reading boot.scr
3174 bytes read in 26 ms (119.1 KiB/s)
## Executing script at 42000000
Odroid #
Odroid #
Odroid # â–’

U-Boot 2017.03-rc3-00006-g3dd6fdb (Mar 14 2017 - 13:54:08 +0000)

CPU:   Exynos4412 @ 1 GHz
Model: Odroid based on Exynos4412
Board: Odroid based on Exynos4412
Type:  u3
DRAM:  2 GiB
LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
*** Warning - bad CRC, using default environment

Net:   No ethernet found.
Hit any key to stop autoboot:  0
reading boot.scr
3174 bytes read in 49 ms (62.5 KiB/s)
## Executing script at 42000000
Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
Odroid # usb start
starting USB...
USB0:   ERROR: Regulator BUCK8 value setting error: -22
at board/samsung/odroid/odroid.c:508/board_usb_init()
USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
Odroid #
Odroid #
Odroid # reset
resetting ...


U-Boot 2017.03-rc3-00006-g3dd6fdb (Mar 14 2017 - 13:54:08 +0000)

CPU:   Exynos4412 @ 1 GHz
Model: Odroid based on Exynos4412
Board: Odroid based on Exynos4412
Type:  u3
DRAM:  2 GiB
LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
*** Warning - bad CRC, using default environment

Net:   No ethernet found.
Hit any key to stop autoboot:  0
reading boot.scr
3174 bytes read in 27 ms (114.3 KiB/s)
## Executing script at 42000000
Odroid #
Odroid #
Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
Odroid # usb start
starting USB...
USB0:   ERROR: Regulator BUCK8 value setting error: -22
at board/samsung/odroid/odroid.c:508/board_usb_init()
USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 0 Ethernet Device(s) found
Odroid #

------
Note: on cold boot it seem to detect ethernet but not on warm reset

Possible solution is reset of HUB via gpio pins, just like the kernel example.

[1] https://lkml.org/lkml/2017/1/7/32

Looking into some other solution for this approach.

Best Regards
-Anand Moon

[U-Boot] Ethernet not detecting on Odroid u3

[Siarhei Siamashka]

On Tue, 14 Mar 2017 20:06:42 +0530
Anand Moon <linux.amoon@gmail.com> wrote:

> On 14 March 2017 at 15:24, Siarhei Siamashka <siarhei.siamashka@gmail.com> wrote:
> > You can just clone my git branch:
> >
> >    git clone -b 20170306-unbreak-odroid https://github.com/ssvb/u-boot.git
> >
> > Then compile it and try to boot on your ODROID-U3 board. Check if it
> > boots and if the Ethernet is working properly. And finally report
> > the results. If it works, then I will send cleaned up versions of
> > these patches to the U-Boot mailing list.
> >  
> [snip]
> 
> I dont feel the hack works perfectly.

Thanks for trying it.

Yes, these patches were not supposed to be perfect yet. But at least
it's good that the ODROID-U3 board model gets detected successfully
and the Ethernet gets initialized successfully at least on the first
run.

> I compiled your u-boot tree and could not load the kernel.

Well, at least it is not a regression introduced by my patches, right?
 
> [0] git clone -b 20170306-unbreak-odroid https://github.com/ssvb/u-boot.git
> 
> ------------------------------------------------------------------------------------
> U-Boot 2017.03-rc3-00006-g3dd6fdb (Mar 14 2017 - 13:54:08 +0000)
> 
> CPU:   Exynos4412 @ 1 GHz
> Model: Odroid based on Exynos4412
> Board: Odroid based on Exynos4412
> Type:  u3
> DRAM:  2 GiB
> LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
> LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
> LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
> MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
> *** Warning - bad CRC, using default environment
> 
> Net:   No ethernet found.
> Hit any key to stop autoboot:  0
> reading boot.scr
> 3174 bytes read in 49 ms (62.5 KiB/s)
> ## Executing script at 42000000
> Found kernel image: zImage
> reading exynos4412-odroidu3.dtb
> 54561 bytes read in 23 ms (2.3 MiB/s)
> Found ramdisk image.
> reading uInitrd
> 9873974 bytes read in 679 ms (13.9 MiB/s)
> reading zImage
> 6552912 bytes read in 460 ms (13.6 MiB/s)
> Kernel image @ 0x40007fc0 [ 0x000000 - 0x63fd50 ]
> ## Loading init Ramdisk from Legacy Image at 42000000 ...
>    Image Name:   uInitrdu3
>    Image Type:   ARM Linux RAMDisk Image (gzip compressed)
>    Data Size:    9873910 Bytes = 9.4 MiB
>    Load Address: 42000000
>    Entry Point:  42000000
>    Verifying Checksum ... OK
> ## Flattened Device Tree blob at 40800000
>    Booting using the fdt blob at 0x40800000
>    Loading Ramdisk to ba4d6000, end bae409f6 ... OK
>    Loading Device Tree to ba4c5000, end ba4d5520 ... OK
> 
> Starting kernel ...
> ------------------------------------------------------------------------------------
> After that I had to remove my zImage and exynos4412-odroidu3.dtb to
> enter into u-boot prompt to manually test.

Have you just dropped the dtb file and zImage on the first partition
of the SD card?

Yes, I can confirm that without having a boot script there and using
scripts from the default U-Boot environment it does get stuck in
exactly this way.

You can create something like the following "boot.cmd" file (it's just
a chopped up version of something ODROID related found on the Internet):

########################
setenv zimg_addr "0x40008000"
setenv fdt_addr "0x41f00000"
setenv fdt_high "0xffffffff"

setenv zimg_file "zImage"
setenv uloadcmd "load mmc 0:1 ${zimg_addr} ${zimg_file}; fatload mmc 0:1 ${fdt_addr} ${fdtfile}"
setenv bootcmd "run uloadcmd; fdt addr ${fdt_addr}; fdt resize; bootz ${zimg_addr} - ${fdt_addr}"
boot
########################

Then create a boot script from this file using the following command:
    "mkimage -C none -A arm -T script -d boot.cmd boot.scr"

Then the "boot.scr" file should be copied to the SD card. The linux
kernel should at least start booting. But you will also need to
provide a kernel cmdline with the location of your rootfs.

I think that we should review the default boot scripts in the U-Boot
environment for Exynos based ODROID bords. As you can see, the current
behaviour is very hostile to the users.

> ------------------------------------------------------------------------------------
> U-Boot 2017.03-rc3-00006-g3dd6fdb (Mar 14 2017 - 13:54:08 +0000)
> 
> CPU:   Exynos4412 @ 1 GHz
> Model: Odroid based on Exynos4412
> Board: Odroid based on Exynos4412
> Type:  u3
> DRAM:  2 GiB
> LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
> LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
> LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
> MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
> *** Warning - bad CRC, using default environment
> 
> Net:   No ethernet found.
> Hit any key to stop autoboot:  0
> reading boot.scr
> 3174 bytes read in 26 ms (119.1 KiB/s)
> ## Executing script at 42000000
> Odroid #
> Odroid #
> Odroid # â–’
> 
> U-Boot 2017.03-rc3-00006-g3dd6fdb (Mar 14 2017 - 13:54:08 +0000)
> 
> CPU:   Exynos4412 @ 1 GHz
> Model: Odroid based on Exynos4412
> Board: Odroid based on Exynos4412
> Type:  u3
> DRAM:  2 GiB
> LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
> LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
> LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
> MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
> *** Warning - bad CRC, using default environment
> 
> Net:   No ethernet found.
> Hit any key to stop autoboot:  0
> reading boot.scr
> 3174 bytes read in 49 ms (62.5 KiB/s)
> ## Executing script at 42000000
> Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
> Odroid # usb start
> starting USB...
> USB0:   ERROR: Regulator BUCK8 value setting error: -22
> at board/samsung/odroid/odroid.c:508/board_usb_init()
> USB EHCI 1.00
> scanning bus 0 for devices... 3 USB Device(s) found
>        scanning usb for storage devices... 0 Storage Device(s) found
>        scanning usb for ethernet devices... 1 Ethernet Device(s) found
> Odroid #
> Odroid #
> Odroid # reset
> resetting ...
> 
> 
> U-Boot 2017.03-rc3-00006-g3dd6fdb (Mar 14 2017 - 13:54:08 +0000)
> 
> CPU:   Exynos4412 @ 1 GHz
> Model: Odroid based on Exynos4412
> Board: Odroid based on Exynos4412
> Type:  u3
> DRAM:  2 GiB
> LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
> LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
> LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
> MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
> *** Warning - bad CRC, using default environment
> 
> Net:   No ethernet found.
> Hit any key to stop autoboot:  0
> reading boot.scr
> 3174 bytes read in 27 ms (114.3 KiB/s)
> ## Executing script at 42000000
> Odroid #
> Odroid #
> Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
> Odroid # usb start
> starting USB...
> USB0:   ERROR: Regulator BUCK8 value setting error: -22
> at board/samsung/odroid/odroid.c:508/board_usb_init()
> USB EHCI 1.00
> scanning bus 0 for devices... 2 USB Device(s) found
>        scanning usb for storage devices... 0 Storage Device(s) found
>        scanning usb for ethernet devices... 0 Ethernet Device(s) found
> Odroid #
> 
> ------
> Note: on cold boot it seem to detect ethernet but not on warm reset
> 
> Possible solution is reset of HUB via gpio pins, just like the kernel example.
> 
> [1] https://lkml.org/lkml/2017/1/7/32
> 
> Looking into some other solution for this approach.

Thanks. I'll try to debug the Ethernet initialization after warm reset.

-- 
Best regards,
Siarhei Siamashka

[U-Boot] Ethernet not detecting on Odroid u3

[Jaehoon Chung]

Hi Siarhei,

On 03/14/2017 08:26 PM, Siarhei Siamashka wrote:
> On Tue, 14 Mar 2017 18:01:11 +0900
> Jaehoon Chung <jh80.chung@samsung.com> wrote:
> 
>> On 03/14/2017 04:52 PM, Siarhei Siamashka wrote:
>>> On Mon, 6 Mar 2017 12:18:50 +0200
>>> Siarhei Siamashka <siarhei.siamashka@gmail.com> wrote:
>>>   
>>>> On Thu, 12 Jan 2017 14:02:48 +0530
>>>> Anand Moon <linux.amoon@gmail.com> wrote:
>>>>  
>>>>> Hi All,
>>>>>
>>>>> I tried to compile the latest u-boot for Odroid U3.
>>>>> issue is that Ethernet is not able to detected.
>>>>>
>>>>> Please let me know what need to enable USB Ethernet
>>>>> to support tftp boot.
>>>>>
>>>>> Best Regards
>>>>> -Anand
>>>>>
>>>>> ------
>>>>> U-Boot 2017.01-02075-g4386feb-dirty (Jan 12 2017 - 06:17:08 +0000)
>>>>>
>>>>> CPU:   Exynos4412 @ 1 GHz
>>>>> Model: Odroid based on Exynos4412
>>>>> Board: Odroid based on Exynos4412
>>>>> Type:  u3
>>>>> DRAM:  2 GiB
>>>>> LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
>>>>> LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
>>>>> LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
>>>>> MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
>>>>> *** Warning - bad CRC, using default environment
>>>>>
>>>>> Net:   No ethernet found.
>>>>> Hit any key to stop autoboot:  0
>>>>> Odroid #
>>>>> Odroid #
>>>>> Odroid # usb start
>>>>> starting USB...
>>>>> USB0:   USB EHCI 1.00
>>>>> scanning bus 0 for devices... 1 USB Device(s) found
>>>>>        scanning usb for ethernet devices... 0 Ethernet Device(s) found
>>>>> Odroid #
>>>>> Odroid #
>>>>> Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
>>>>> Odroid # usb start
>>>>> Odroid # usb info
>>>>> 1: Hub,  USB Revision 2.0
>>>>>  - u-boot EHCI Host Controller
>>>>>  - Class: Hub
>>>>>  - PacketSize: 64  Configurations: 1
>>>>>  - Vendor: 0x0000  Product 0x0000 Version 1.0
>>>>>    Configuration: 1
>>>>>    - Interfaces: 1 Self Powered 0mA
>>>>>      Interface: 0
>>>>>      - Alternate Setting 0, Endpoints: 1
>>>>>      - Class Hub
>>>>>      - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
>>>>>
>>>>> Odroid # reset    
>>>>
>>>> Hi Anand,
>>>>
>>>> It's an old problem and we have identified its root cause a long
>>>> time ago:
>>>>
>>>>     https://lists.denx.de/pipermail/u-boot/2015-October/231061.html
>>>>
>>>> Basically, a voltage regulator is not getting initialized because
>>>> a call to the board_usb_init() function was lost during the DM
>>>> conversion. You can try to compile U-Boot from my branch, it contains
>>>> the rebased fixes which I have been using all this time on my ODROID-X
>>>> board:
>>>>
>>>>     https://github.com/ssvb/u-boot/commits/20170306-unbreak-odroid
>>>>
>>>> I did all the initial investigation back in 2015, but tried to
>>>> delegate the actual bugfixing work to the ODROID board maintainer(s).
>>>> Apparently it did not fly and ODROID support is still broken.
>>>>
>>>> If you can test my branch and confirm that it works on your ODROID-U3,
>>>> then I can maybe spend some time on making cleaner patches and ensuring
>>>> that they reach the U-Boot git repository.
>>>>
>>>> Thanks!  
>>>
>>> Hello again,
>>>
>>> Anand Moon, considering no reply to my post, do I understand it
>>> right that you are actually not very much interested in getting
>>> this particular problem resolved in U-Boot?
>>>
>>> These ODROID problems are relatively simple and don't require any
>>> special skills or considerable efforts to resolve. The only issue
>>> is that apparently almost nobody uses the mainline U-Boot on this
>>> hardware and nobody gives rats about having it usable out of the
>>> box.
>>>
>>> I only have an ODROID-X board, which is a rather early and
>>> short-lived revision. Again, if you or anybody else could step in
>>> and take care of testing the fixes on other ODROID boards (X2 and
>>> U3), then we could get ODROID boards working properly in the next
>>> U-Boot release.
>>>
>>>
>>> Jaehoon Chung, you seem to be listed as the current nominal ODROID
>>> boards maintainer. But you don't seem to be doing anything other
>>> than just making promises to check various things and then
>>> disappearing for months/years:  
>>
>> Actually, i had forgotten this mail...When i check the patches, first
>> i'm looking at patchwork. And I'm remembering what i do and need.
>> Right, it's my mistake for forgetting it.
>>
>> Disappearing for months/years?
> 
> Yes, exactly. And that's what has already happened twice.
> 
> "Once is happenstance, twice is coincidence, the third time it's
> enemy action" ;-) But don't take it too seriously. I have
> no intention to blame anybody because this is not moving us
> anywhere.
> 
>> If i decided to do nothing, i might not reply anything to u-boot
>> mailing list.
> 
> BTW, thanks for replying.

Sorry for late..It was my holidays.

> 
>> If you send the polite reminding ping mail, maybe i will really
>> apologize to you. but now i don't have those mind.
>> You're regarding to me like nothing to do...
>>>
>>>     https://lists.denx.de/pipermail/u-boot/2017-January/277954.html
>>>     https://lists.denx.de/pipermail/u-boot/2015-October/231023.html  
>>
>> I can't access this URL,,so i don't know what you added..
> 
> This URL is the official U-Boot mailing list archive. Can you
> explain what's going on and why you can't access it? The mailing
> list admin might be interested in resolving issues (if there
> are any).

It's affected to our company firewall problem.
Sometime, i can't access the some URL because of it.
I think you can understand this situation.

> 
>>>
>>> Could you please explain what's going on and what are your plans
>>> regarding ODROID boards support in U-Boot?  
>>
>> I'm preparing to covert to DM from legacy..For converting DM,
>> I'm doing step by step for samsung SoCs.
>> Goni -> Universal210 - > Trats -> Trats2 -> Odroid also..
>> You can see my patches for goni, universal210, trats..
> 
> Well, looks like you have a lot on your plate. It's not
> surprising that you have no time for maintaining Exynos
> based ODROID boards.
> 
> Still it's only my opinion, but it looks like you got your
> priorities wrong. The DM conversion is more like a refactoring
> and code massaging activity. It offers exactly nothing to the
> end users.

First, Samsung SoCs maintainer had requested to convert to DM.
If Samsung didn't convert to DM, U-boot maintainers mentioned "Will remove the board files".

> 
> Yes, the idea is that these refactoring changes can make the
> code cleaner, more reusable and easier to maintain, which may
> result in better quality and reliability in the long run.
> Yada yada bla bla bla.
> 
> However we have a bitrotten crap in the mainline U-Boot right
> now (both MMC and USB are buggered on Exynos based ODROID boards)
> and it has been this way since at least 2015. Yes, people are
> already used to this and accept it as a norm, so they don't
> complain much. I don't know what they are using right now on
> their hardware. Maybe the Hardkernel's bootloader? Or an old
> U-Boot release?

Yes, If i didn't check about odroid series. So maybe you're right.
Your opinion was motivated to think what i'm doing and what i have a plan.
Thanks for it.

> 
> IMHO making sure that the *current* U-Boot release works
> correctly should be the first priority of the ODROID boards
> maintainer. Rather than entertaining himself with a fun DM
> stuff...

but I mentioned above why i did for DM..So i think you can understand it.
It's not for only enjoying. 

> 
>> I'm not sure this problem is fixed or not..
> 
> You could just boot your ODROID-U3 board and easily check whether
> the Ethernet bug is still there or not. That's what you have
> actually promised back in January.

Actually, i missed this case...and i did some important tasks for company.
It seems that sounds excuse..

> 
>> if you want to fix it, i will do it..but not right now.
>> I keep going my current task..
> 
> OK, I'll take care of it. But as I said, I would need
> ODROID-X2 and ODROID-U3 owners to test the fixes because
> I don't have a full set of hardware.

If you can send the patches..i can test all odroid boards.
Finally, i have a time for it. 


Best Regards,
Jaehoon Chung

>