[PATCH 4.4 00/35] 4.4.55-stable review

[PATCH 4.4 00/35] 4.4.55-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.4.55 release.
There are 35 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat Mar 18 14:28:52 UTC 2017.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.55-rc1.gz
or in the git tree and branch at:
  git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.4.55-rc1

Theodore Ts'o <tytso@mit.edu>
    ext4: don't BUG when truncating encrypted inodes on the orphan list

Mikulas Patocka <mpatocka@redhat.com>
    dm: flush queued bios when process blocks to avoid deadlock

Dan Williams <dan.j.williams@intel.com>
    nfit, libnvdimm: fix interleave set cookie calculation

Michael Holzheu <holzheu@linux.vnet.ibm.com>
    s390/kdump: Use "LINUX" ELF note name instead of "CORE"

Janosch Frank <frankja@linux.vnet.ibm.com>
    KVM: s390: Fix guest migration for huge guests resulting in panic

Luis de Bethencourt <luisbg@osg.samsung.com>
    mvsas: fix misleading indentation

Krzysztof Kozlowski <krzk@kernel.org>
    serial: samsung: Continue to work if DMA request fails

Johan Hovold <johan@kernel.org>
    USB: serial: io_ti: fix information leak in completion handler

Johan Hovold <johan@kernel.org>
    USB: serial: io_ti: fix NULL-deref in interrupt callback

Johan Hovold <johan@kernel.org>
    USB: iowarrior: fix NULL-deref in write

Johan Hovold <johan@kernel.org>
    USB: iowarrior: fix NULL-deref at probe

Johan Hovold <johan@kernel.org>
    USB: serial: omninet: fix reference leaks at open

Johan Hovold <johan@kernel.org>
    USB: serial: safe_serial: fix information leak in completion handler

Guenter Roeck <linux@roeck-us.net>
    usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllers

Peter Chen <peter.chen@nxp.com>
    usb: host: xhci-dbg: HCIVERSION should be a binary number

Felipe Balbi <felipe.balbi@linux.intel.com>
    usb: gadget: function: f_fs: pass companion descriptor along

Felipe Balbi <felipe.balbi@linux.intel.com>
    usb: dwc3: gadget: make Set Endpoint Configuration macros safe

Peter Chen <peter.chen@nxp.com>
    usb: gadget: dummy_hcd: clear usb_gadget region before registration

Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
    powerpc: Emulation support for load/store instructions on LE

Rik van Riel <riel@redhat.com>
    tracing: Add #undef to fix compile error

James Hogan <james.hogan@imgtec.com>
    MIPS: Netlogic: Fix CP0_EBASE redefinition warnings

Ralf Baechle <ralf@linux-mips.org>
    MIPS: DEC: Avoid la pseudo-instruction in delay slots

Arnd Bergmann <arnd@arndb.de>
    mm: memcontrol: avoid unused function warning

Arnd Bergmann <arnd@arndb.de>
    cpmac: remove hopeless #warning

Arnd Bergmann <arnd@arndb.de>
    MIPS: ralink: Remove unused rt*_wdt_reset functions

John Crispin <john@phrozen.org>
    MIPS: ralink: Cosmetic change to prom_init().

Arnd Bergmann <arnd@arndb.de>
    mtd: pmcmsp: use kstrndup instead of kmalloc+strncpy

Arnd Bergmann <arnd@arndb.de>
    MIPS: Update lemote2f_defconfig for CPU_FREQ_STAT change

Arnd Bergmann <arnd@arndb.de>
    MIPS: ip22: Fix ip28 build for modern gcc

Arnd Bergmann <arnd@arndb.de>
    MIPS: Update ip27_defconfig for SCSI_DH change

Arnd Bergmann <arnd@arndb.de>
    MIPS: ip27: Disable qlge driver in defconfig

Arnd Bergmann <arnd@arndb.de>
    MIPS: Update defconfigs for NF_CT_PROTO_DCCP/UDPLITE change

Arnd Bergmann <arnd@arndb.de>
    crypto: improve gcc optimization flags for serpent and wp512

Johan Hovold <johan@kernel.org>
    USB: serial: digi_acceleport: fix OOB-event processing

Johan Hovold <johan@kernel.org>
    USB: serial: digi_acceleport: fix OOB data sanity check


-------------

Diffstat:

 Makefile                                    |  4 +--
 arch/mips/configs/ip22_defconfig            |  4 +--
 arch/mips/configs/ip27_defconfig            |  3 +-
 arch/mips/configs/lemote2f_defconfig        |  2 +-
 arch/mips/configs/malta_defconfig           |  4 +--
 arch/mips/configs/malta_kvm_defconfig       |  4 +--
 arch/mips/configs/malta_kvm_guest_defconfig |  4 +--
 arch/mips/configs/maltaup_xpa_defconfig     |  4 +--
 arch/mips/configs/nlm_xlp_defconfig         |  2 +-
 arch/mips/configs/nlm_xlr_defconfig         |  2 +-
 arch/mips/dec/int-handler.S                 | 40 +++++++++++++++++++--
 arch/mips/netlogic/common/reset.S           | 11 +++---
 arch/mips/netlogic/common/smpboot.S         |  4 +--
 arch/mips/ralink/prom.c                     |  9 +++--
 arch/mips/ralink/rt288x.c                   | 10 ------
 arch/mips/ralink/rt305x.c                   | 11 ------
 arch/mips/ralink/rt3883.c                   | 10 ------
 arch/mips/sgi-ip22/Platform                 |  2 +-
 arch/powerpc/lib/sstep.c                    | 20 -----------
 arch/s390/kernel/crash_dump.c               | 18 +++++-----
 arch/s390/mm/pgtable.c                      | 19 +++++++++-
 crypto/Makefile                             |  2 ++
 drivers/acpi/nfit.c                         | 16 ++++++++-
 drivers/md/dm.c                             | 55 +++++++++++++++++++++++++++++
 drivers/mtd/maps/pmcmsp-flash.c             |  4 +--
 drivers/net/ethernet/ti/cpmac.c             |  2 +-
 drivers/nvdimm/namespace_devs.c             | 28 +++++++++++----
 drivers/nvdimm/nd.h                         |  1 +
 drivers/nvdimm/region_devs.c                |  9 +++++
 drivers/scsi/mvsas/mv_sas.c                 |  4 +--
 drivers/tty/serial/samsung.c                |  6 ++--
 drivers/usb/dwc3/gadget.h                   | 14 ++++----
 drivers/usb/gadget/function/f_fs.c          | 15 ++++++--
 drivers/usb/gadget/udc/dummy_hcd.c          |  2 ++
 drivers/usb/host/xhci-dbg.c                 |  2 +-
 drivers/usb/host/xhci-plat.c                |  2 ++
 drivers/usb/misc/iowarrior.c                | 21 +++++++----
 drivers/usb/serial/digi_acceleport.c        | 14 +++++---
 drivers/usb/serial/io_ti.c                  |  8 ++++-
 drivers/usb/serial/omninet.c                |  6 ----
 drivers/usb/serial/safe_serial.c            |  5 +++
 fs/ext4/inode.c                             |  4 +++
 include/linux/libnvdimm.h                   |  2 ++
 include/trace/events/syscalls.h             |  1 +
 mm/memcontrol.c                             | 36 +++++++++----------
 45 files changed, 290 insertions(+), 156 deletions(-)

[PATCH 4.4 01/35] USB: serial: digi_acceleport: fix OOB data sanity check

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 2d380889215fe20b8523345649dee0579821800c upstream.

Make sure to check for short transfers to avoid underflow in a loop
condition when parsing the receive buffer.

Also fix an off-by-one error in the incomplete sanity check which could
lead to invalid data being parsed.

Fixes: 8c209e6782ca ("USB: make actual_length in struct urb field u32")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/digi_acceleport.c |   14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -1483,16 +1483,20 @@ static int digi_read_oob_callback(struct
 	struct usb_serial *serial = port->serial;
 	struct tty_struct *tty;
 	struct digi_port *priv = usb_get_serial_port_data(port);
+	unsigned char *buf = urb->transfer_buffer;
 	int opcode, line, status, val;
 	int i;
 	unsigned int rts;
 
+	if (urb->actual_length < 4)
+		return -1;
+
 	/* handle each oob command */
-	for (i = 0; i < urb->actual_length - 3;) {
-		opcode = ((unsigned char *)urb->transfer_buffer)[i++];
-		line = ((unsigned char *)urb->transfer_buffer)[i++];
-		status = ((unsigned char *)urb->transfer_buffer)[i++];
-		val = ((unsigned char *)urb->transfer_buffer)[i++];
+	for (i = 0; i < urb->actual_length - 4; i += 4) {
+		opcode = buf[i];
+		line = buf[i + 1];
+		status = buf[i + 2];
+		val = buf[i + 3];
 
 		dev_dbg(&port->dev, "digi_read_oob_callback: opcode=%d, line=%d, status=%d, val=%d\n",
 			opcode, line, status, val);

[PATCH 4.4 02/35] USB: serial: digi_acceleport: fix OOB-event processing

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 2e46565cf622dd0534a9d8bffe152a577b48d7aa upstream.

A recent change claimed to fix an off-by-one error in the OOB-port
completion handler, but instead introduced such an error. This could
specifically led to modem-status changes going unnoticed, effectively
breaking TIOCMGET.

Note that the offending commit fixes a loop-condition underflow and is
marked for stable, but should not be backported without this fix.

Reported-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 2d380889215f ("USB: serial: digi_acceleport: fix OOB data sanity
check")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/digi_acceleport.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -1492,7 +1492,7 @@ static int digi_read_oob_callback(struct
 		return -1;
 
 	/* handle each oob command */
-	for (i = 0; i < urb->actual_length - 4; i += 4) {
+	for (i = 0; i < urb->actual_length - 3; i += 4) {
 		opcode = buf[i];
 		line = buf[i + 1];
 		status = buf[i + 2];

[PATCH 4.4 03/35] crypto: improve gcc optimization flags for serpent and wp512

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit 7d6e9105026788c497f0ab32fa16c82f4ab5ff61 upstream.

An ancient gcc bug (first reported in 2003) has apparently resurfaced
on MIPS, where kernelci.org reports an overly large stack frame in the
whirlpool hash algorithm:

crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=]

With some testing in different configurations, I'm seeing large
variations in stack frames size up to 1500 bytes for what should have
around 300 bytes at most. I also checked the reference implementation,
which is essentially the same code but also comes with some test and
benchmarking infrastructure.

It seems that recent compiler versions on at least arm, arm64 and powerpc
have a partial fix for this problem, but enabling "-fsched-pressure", but
even with that fix they suffer from the issue to a certain degree. Some
testing on arm64 shows that the time needed to hash a given amount of
data is roughly proportional to the stack frame size here, which makes
sense given that the wp512 implementation is doing lots of loads for
table lookups, and the problem with the overly large stack is a result
of doing a lot more loads and stores for spilled registers (as seen from
inspecting the object code).

Disabling -fschedule-insns consistently fixes the problem for wp512,
in my collection of cross-compilers, the results are consistently better
or identical when comparing the stack sizes in this function, though
some architectures (notable x86) have schedule-insns disabled by
default.

The four columns are:
default: -O2
press:	 -O2 -fsched-pressure
nopress: -O2 -fschedule-insns -fno-sched-pressure
nosched: -O2 -no-schedule-insns (disables sched-pressure)

				default	press	nopress	nosched
alpha-linux-gcc-4.9.3		1136	848	1136	176
am33_2.0-linux-gcc-4.9.3	2100	2076	2100	2104
arm-linux-gnueabi-gcc-4.9.3	848	848	1048	352
cris-linux-gcc-4.9.3		272	272	272	272
frv-linux-gcc-4.9.3		1128	1000	1128	280
hppa64-linux-gcc-4.9.3		1128	336	1128	184
hppa-linux-gcc-4.9.3		644	308	644	276
i386-linux-gcc-4.9.3		352	352	352	352
m32r-linux-gcc-4.9.3		720	656	720	268
microblaze-linux-gcc-4.9.3	1108	604	1108	256
mips64-linux-gcc-4.9.3		1328	592	1328	208
mips-linux-gcc-4.9.3		1096	624	1096	240
powerpc64-linux-gcc-4.9.3	1088	432	1088	160
powerpc-linux-gcc-4.9.3		1080	584	1080	224
s390-linux-gcc-4.9.3		456	456	624	360
sh3-linux-gcc-4.9.3		292	292	292	292
sparc64-linux-gcc-4.9.3		992	240	992	208
sparc-linux-gcc-4.9.3		680	592	680	312
x86_64-linux-gcc-4.9.3		224	240	272	224
xtensa-linux-gcc-4.9.3		1152	704	1152	304

aarch64-linux-gcc-7.0.0		224	224	1104	208
arm-linux-gnueabi-gcc-7.0.1	824	824	1048	352
mips-linux-gcc-7.0.0		1120	648	1120	272
x86_64-linux-gcc-7.0.1		240	240	304	240

arm-linux-gnueabi-gcc-4.4.7	840			392
arm-linux-gnueabi-gcc-4.5.4	784	728	784	320
arm-linux-gnueabi-gcc-4.6.4	736	728	736	304
arm-linux-gnueabi-gcc-4.7.4	944	784	944	352
arm-linux-gnueabi-gcc-4.8.5	464	464	760	352
arm-linux-gnueabi-gcc-4.9.3	848	848	1048	352
arm-linux-gnueabi-gcc-5.3.1	824	824	1064	336
arm-linux-gnueabi-gcc-6.1.1	808	808	1056	344
arm-linux-gnueabi-gcc-7.0.1	824	824	1048	352

Trying the same test for serpent-generic, the picture is a bit different,
and while -fno-schedule-insns is generally better here than the default,
-fsched-pressure wins overall, so I picked that instead.

				default	press	nopress	nosched
alpha-linux-gcc-4.9.3		1392	864	1392	960
am33_2.0-linux-gcc-4.9.3	536	524	536	528
arm-linux-gnueabi-gcc-4.9.3	552	552	776	536
cris-linux-gcc-4.9.3		528	528	528	528
frv-linux-gcc-4.9.3		536	400	536	504
hppa64-linux-gcc-4.9.3		524	208	524	480
hppa-linux-gcc-4.9.3		768	472	768	508
i386-linux-gcc-4.9.3		564	564	564	564
m32r-linux-gcc-4.9.3		712	576	712	532
microblaze-linux-gcc-4.9.3	724	392	724	512
mips64-linux-gcc-4.9.3		720	384	720	496
mips-linux-gcc-4.9.3		728	384	728	496
powerpc64-linux-gcc-4.9.3	704	304	704	480
powerpc-linux-gcc-4.9.3		704	296	704	480
s390-linux-gcc-4.9.3		560	560	592	536
sh3-linux-gcc-4.9.3		540	540	540	540
sparc64-linux-gcc-4.9.3		544	352	544	496
sparc-linux-gcc-4.9.3		544	344	544	496
x86_64-linux-gcc-4.9.3		528	536	576	528
xtensa-linux-gcc-4.9.3		752	544	752	544

aarch64-linux-gcc-7.0.0		432	432	656	480
arm-linux-gnueabi-gcc-7.0.1	616	616	808	536
mips-linux-gcc-7.0.0		720	464	720	488
x86_64-linux-gcc-7.0.1		536	528	600	536

arm-linux-gnueabi-gcc-4.4.7	592			440
arm-linux-gnueabi-gcc-4.5.4	776	448	776	544
arm-linux-gnueabi-gcc-4.6.4	776	448	776	544
arm-linux-gnueabi-gcc-4.7.4	768	448	768	544
arm-linux-gnueabi-gcc-4.8.5	488	488	776	544
arm-linux-gnueabi-gcc-4.9.3	552	552	776	536
arm-linux-gnueabi-gcc-5.3.1	552	552	776	536
arm-linux-gnueabi-gcc-6.1.1	560	560	776	536
arm-linux-gnueabi-gcc-7.0.1	616	616	808	536

I did not do any runtime tests with serpent, so it is possible that stack
frame size does not directly correlate with runtime performance here and
it actually makes things worse, but it's more likely to help here, and
the reduced stack frame size is probably enough reason to apply the patch,
especially given that the crypto code is often used in deep call chains.

Link: https://kernelci.org/build/id/58797d7559b5149efdf6c3a9/logs/
Link: http://www.larc.usp.br/~pbarreto/WhirlpoolPage.html
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=11488
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79149
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/Makefile |    2 ++
 1 file changed, 2 insertions(+)

--- a/crypto/Makefile
+++ b/crypto/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_CRYPTO_SHA1) += sha1_generi
 obj-$(CONFIG_CRYPTO_SHA256) += sha256_generic.o
 obj-$(CONFIG_CRYPTO_SHA512) += sha512_generic.o
 obj-$(CONFIG_CRYPTO_WP512) += wp512.o
+CFLAGS_wp512.o := $(call cc-option,-fno-schedule-insns)  # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79149
 obj-$(CONFIG_CRYPTO_TGR192) += tgr192.o
 obj-$(CONFIG_CRYPTO_GF128MUL) += gf128mul.o
 obj-$(CONFIG_CRYPTO_ECB) += ecb.o
@@ -85,6 +86,7 @@ obj-$(CONFIG_CRYPTO_BLOWFISH_COMMON) +=
 obj-$(CONFIG_CRYPTO_TWOFISH) += twofish_generic.o
 obj-$(CONFIG_CRYPTO_TWOFISH_COMMON) += twofish_common.o
 obj-$(CONFIG_CRYPTO_SERPENT) += serpent_generic.o
+CFLAGS_serpent_generic.o := $(call cc-option,-fsched-pressure)  # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79149
 obj-$(CONFIG_CRYPTO_AES) += aes_generic.o
 obj-$(CONFIG_CRYPTO_CAMELLIA) += camellia_generic.o
 obj-$(CONFIG_CRYPTO_CAST_COMMON) += cast_common.o

[PATCH 4.4 04/35] MIPS: Update defconfigs for NF_CT_PROTO_DCCP/UDPLITE change

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit 9ddc16ad8e0bc7742fc96d5aaabc5b8698512cd1 upstream.

In linux-4.10-rc, NF_CT_PROTO_UDPLITE and NF_CT_PROTO_DCCP are bool
symbols instead of tristate, and kernelci.org reports a bunch of
warnings for this, like:

arch/mips/configs/malta_kvm_guest_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
arch/mips/configs/malta_defconfig:62:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
arch/mips/configs/malta_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
arch/mips/configs/ip22_defconfig:70:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
arch/mips/configs/ip22_defconfig:71:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE

This changes all the MIPS defconfigs with these symbols to have them
built-in.

Fixes: 9b91c96c5d1f ("netfilter: conntrack: built-in support for UDPlite")
Fixes: c51d39010a1b ("netfilter: conntrack: built-in support for DCCP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14999/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/configs/ip22_defconfig            |    4 ++--
 arch/mips/configs/malta_defconfig           |    4 ++--
 arch/mips/configs/malta_kvm_defconfig       |    4 ++--
 arch/mips/configs/malta_kvm_guest_defconfig |    4 ++--
 arch/mips/configs/maltaup_xpa_defconfig     |    4 ++--
 arch/mips/configs/nlm_xlp_defconfig         |    2 +-
 arch/mips/configs/nlm_xlr_defconfig         |    2 +-
 7 files changed, 12 insertions(+), 12 deletions(-)

--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -68,8 +68,8 @@ CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_DCCP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -59,8 +59,8 @@ CONFIG_NETFILTER=y
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_DCCP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
--- a/arch/mips/configs/malta_kvm_defconfig
+++ b/arch/mips/configs/malta_kvm_defconfig
@@ -60,8 +60,8 @@ CONFIG_NETFILTER=y
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_DCCP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
--- a/arch/mips/configs/malta_kvm_guest_defconfig
+++ b/arch/mips/configs/malta_kvm_guest_defconfig
@@ -59,8 +59,8 @@ CONFIG_NETFILTER=y
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_DCCP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
--- a/arch/mips/configs/maltaup_xpa_defconfig
+++ b/arch/mips/configs/maltaup_xpa_defconfig
@@ -61,8 +61,8 @@ CONFIG_NETFILTER=y
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_DCCP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
--- a/arch/mips/configs/nlm_xlp_defconfig
+++ b/arch/mips/configs/nlm_xlp_defconfig
@@ -111,7 +111,7 @@ CONFIG_NETFILTER=y
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
--- a/arch/mips/configs/nlm_xlr_defconfig
+++ b/arch/mips/configs/nlm_xlr_defconfig
@@ -91,7 +91,7 @@ CONFIG_NETFILTER=y
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m

Re: [PATCH 4.4 04/35] MIPS: Update defconfigs for NF_CT_PROTO_DCCP/UDPLITE change

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 1480 bytes --]

On Thu, 2017-03-16 at 23:29 +0900, Greg Kroah-Hartman wrote:
> 4.4-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Arnd Bergmann <arnd@arndb.de>
> 
> commit 9ddc16ad8e0bc7742fc96d5aaabc5b8698512cd1 upstream.
> 
> In linux-4.10-rc, NF_CT_PROTO_UDPLITE and NF_CT_PROTO_DCCP are bool
> symbols instead of tristate, and kernelci.org reports a bunch of
> warnings for this, like:
> 
> arch/mips/configs/malta_kvm_guest_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
> arch/mips/configs/malta_defconfig:62:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
> arch/mips/configs/malta_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
> arch/mips/configs/ip22_defconfig:70:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
> arch/mips/configs/ip22_defconfig:71:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
> 
> This changes all the MIPS defconfigs with these symbols to have them
> built-in.
> 
> Fixes: 9b91c96c5d1f ("netfilter: conntrack: built-in support for UDPlite")
> Fixes: c51d39010a1b ("netfilter: conntrack: built-in support for DCCP")
[...]

I don't think this was needed for 4.4 or 4.9, as those symbols were
still tristate type.

Ben.

-- 
Ben Hutchings
Power corrupts.  Absolute power is kind of neat.
                           - John Lehman, Secretary of the US Navy
1981-1987


[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 4.4 04/35] MIPS: Update defconfigs for NF_CT_PROTO_DCCP/UDPLITE change

[Ralf Baechle]

On Sun, Mar 19, 2017 at 04:05:16PM +0000, Ben Hutchings wrote:
> Date:   Sun, 19 Mar 2017 16:05:16 +0000
> From: Ben Hutchings <ben@decadent.org.uk>
> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
>  linux-kernel@vger.kernel.org
> Cc: stable@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
>  linux-mips@linux-mips.org, Ralf Baechle <ralf@linux-mips.org>
> Subject: Re: [PATCH 4.4 04/35] MIPS: Update defconfigs for
>  NF_CT_PROTO_DCCP/UDPLITE change
> Content-Type: multipart/signed; micalg="pgp-sha512";
>         protocol="application/pgp-signature";
>  boundary="=-AwAI9QrjXVRk/IPasf40"
> 
> On Thu, 2017-03-16 at 23:29 +0900, Greg Kroah-Hartman wrote:
> > 4.4-stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Arnd Bergmann <arnd@arndb.de>
> > 
> > commit 9ddc16ad8e0bc7742fc96d5aaabc5b8698512cd1 upstream.
> > 
> > In linux-4.10-rc, NF_CT_PROTO_UDPLITE and NF_CT_PROTO_DCCP are bool
> > symbols instead of tristate, and kernelci.org reports a bunch of
> > warnings for this, like:
> > 
> > arch/mips/configs/malta_kvm_guest_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
> > arch/mips/configs/malta_defconfig:62:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
> > arch/mips/configs/malta_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
> > arch/mips/configs/ip22_defconfig:70:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
> > arch/mips/configs/ip22_defconfig:71:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
> > 
> > This changes all the MIPS defconfigs with these symbols to have them
> > built-in.
> > 
> > Fixes: 9b91c96c5d1f ("netfilter: conntrack: built-in support for UDPlite")
> > Fixes: c51d39010a1b ("netfilter: conntrack: built-in support for DCCP")
> [...]
> 
> I don't think this was needed for 4.4 or 4.9, as those symbols were
> still tristate type.

Indeed, there's no waring for "make ARCH=mips malta_kvm_guest_defconfig".

  Ralf

Re: [PATCH 4.4 04/35] MIPS: Update defconfigs for NF_CT_PROTO_DCCP/UDPLITE change

[Ralf Baechle]

On Sun, Mar 19, 2017 at 04:05:16PM +0000, Ben Hutchings wrote:
> Date:   Sun, 19 Mar 2017 16:05:16 +0000
> From: Ben Hutchings <ben@decadent.org.uk>
> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
>  linux-kernel@vger.kernel.org
> Cc: stable@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
>  linux-mips@linux-mips.org, Ralf Baechle <ralf@linux-mips.org>
> Subject: Re: [PATCH 4.4 04/35] MIPS: Update defconfigs for
>  NF_CT_PROTO_DCCP/UDPLITE change
> Content-Type: multipart/signed; micalg="pgp-sha512";
>         protocol="application/pgp-signature";
>  boundary="=-AwAI9QrjXVRk/IPasf40"
> 
> On Thu, 2017-03-16 at 23:29 +0900, Greg Kroah-Hartman wrote:
> > 4.4-stable review patch.��If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Arnd Bergmann <arnd@arndb.de>
> > 
> > commit 9ddc16ad8e0bc7742fc96d5aaabc5b8698512cd1 upstream.
> > 
> > In linux-4.10-rc, NF_CT_PROTO_UDPLITE and NF_CT_PROTO_DCCP are bool
> > symbols instead of tristate, and kernelci.org reports a bunch of
> > warnings for this, like:
> > 
> > arch/mips/configs/malta_kvm_guest_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
> > arch/mips/configs/malta_defconfig:62:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
> > arch/mips/configs/malta_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
> > arch/mips/configs/ip22_defconfig:70:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
> > arch/mips/configs/ip22_defconfig:71:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
> > 
> > This changes all the MIPS defconfigs with these symbols to have them
> > built-in.
> > 
> > Fixes: 9b91c96c5d1f ("netfilter: conntrack: built-in support for UDPlite")
> > Fixes: c51d39010a1b ("netfilter: conntrack: built-in support for DCCP")
> [...]
> 
> I don't think this was needed for 4.4 or 4.9, as those symbols were
> still tristate type.

Indeed, there's no waring for "make ARCH=mips malta_kvm_guest_defconfig".

  Ralf

Re: [PATCH 4.4 04/35] MIPS: Update defconfigs for NF_CT_PROTO_DCCP/UDPLITE change

[Greg Kroah-Hartman]

On Sun, Mar 19, 2017 at 04:05:16PM +0000, Ben Hutchings wrote:
> On Thu, 2017-03-16 at 23:29 +0900, Greg Kroah-Hartman wrote:
> > 4.4-stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Arnd Bergmann <arnd@arndb.de>
> > 
> > commit 9ddc16ad8e0bc7742fc96d5aaabc5b8698512cd1 upstream.
> > 
> > In linux-4.10-rc, NF_CT_PROTO_UDPLITE and NF_CT_PROTO_DCCP are bool
> > symbols instead of tristate, and kernelci.org reports a bunch of
> > warnings for this, like:
> > 
> > arch/mips/configs/malta_kvm_guest_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
> > arch/mips/configs/malta_defconfig:62:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
> > arch/mips/configs/malta_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
> > arch/mips/configs/ip22_defconfig:70:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
> > arch/mips/configs/ip22_defconfig:71:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
> > 
> > This changes all the MIPS defconfigs with these symbols to have them
> > built-in.
> > 
> > Fixes: 9b91c96c5d1f ("netfilter: conntrack: built-in support for UDPlite")
> > Fixes: c51d39010a1b ("netfilter: conntrack: built-in support for DCCP")
> [...]
> 
> I don't think this was needed for 4.4 or 4.9, as those symbols were
> still tristate type.

I don't know, Arnd was the one that reported it to me.

Arnd?

greg k-h

Re: [PATCH 4.4 04/35] MIPS: Update defconfigs for NF_CT_PROTO_DCCP/UDPLITE change

[Greg Kroah-Hartman]

On Sun, Mar 19, 2017 at 04:05:16PM +0000, Ben Hutchings wrote:
> On Thu, 2017-03-16 at 23:29 +0900, Greg Kroah-Hartman wrote:
> > 4.4-stable review patch.��If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Arnd Bergmann <arnd@arndb.de>
> > 
> > commit 9ddc16ad8e0bc7742fc96d5aaabc5b8698512cd1 upstream.
> > 
> > In linux-4.10-rc, NF_CT_PROTO_UDPLITE and NF_CT_PROTO_DCCP are bool
> > symbols instead of tristate, and kernelci.org reports a bunch of
> > warnings for this, like:
> > 
> > arch/mips/configs/malta_kvm_guest_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
> > arch/mips/configs/malta_defconfig:62:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
> > arch/mips/configs/malta_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
> > arch/mips/configs/ip22_defconfig:70:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
> > arch/mips/configs/ip22_defconfig:71:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
> > 
> > This changes all the MIPS defconfigs with these symbols to have them
> > built-in.
> > 
> > Fixes: 9b91c96c5d1f ("netfilter: conntrack: built-in support for UDPlite")
> > Fixes: c51d39010a1b ("netfilter: conntrack: built-in support for DCCP")
> [...]
> 
> I don't think this was needed for 4.4 or 4.9, as those symbols were
> still tristate type.

I don't know, Arnd was the one that reported it to me.

Arnd?

greg k-h

Re: [PATCH 4.4 04/35] MIPS: Update defconfigs for NF_CT_PROTO_DCCP/UDPLITE change

[Arnd Bergmann]

On Mon, Mar 20, 2017 at 11:30 AM, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> On Sun, Mar 19, 2017 at 04:05:16PM +0000, Ben Hutchings wrote:
>> On Thu, 2017-03-16 at 23:29 +0900, Greg Kroah-Hartman wrote:
>> > 4.4-stable review patch.  If anyone has any objections, please let me know.
>> >
>> > ------------------
>> >
>> > From: Arnd Bergmann <arnd@arndb.de>
>> >
>> > commit 9ddc16ad8e0bc7742fc96d5aaabc5b8698512cd1 upstream.
>> >
>> > In linux-4.10-rc, NF_CT_PROTO_UDPLITE and NF_CT_PROTO_DCCP are bool
>> > symbols instead of tristate, and kernelci.org reports a bunch of
>> > warnings for this, like:
>> >
>> > arch/mips/configs/malta_kvm_guest_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
>> > arch/mips/configs/malta_defconfig:62:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
>> > arch/mips/configs/malta_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
>> > arch/mips/configs/ip22_defconfig:70:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
>> > arch/mips/configs/ip22_defconfig:71:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
>> >
>> > This changes all the MIPS defconfigs with these symbols to have them
>> > built-in.
>> >
>> > Fixes: 9b91c96c5d1f ("netfilter: conntrack: built-in support for UDPlite")
>> > Fixes: c51d39010a1b ("netfilter: conntrack: built-in support for DCCP")
>> [...]
>>
>> I don't think this was needed for 4.4 or 4.9, as those symbols were
>> still tristate type.
>
> I don't know, Arnd was the one that reported it to me.
>
> Arnd?

I thought I had only reported it for the v4.10-stable tree. I was a bit vague
about which of the ones I reported were needed on older trees as well,
but the changelog text is fairly specific.

      Arnd

Re: [PATCH 4.4 04/35] MIPS: Update defconfigs for NF_CT_PROTO_DCCP/UDPLITE change

[Greg Kroah-Hartman]

On Mon, Mar 20, 2017 at 11:42:39AM +0100, Arnd Bergmann wrote:
> On Mon, Mar 20, 2017 at 11:30 AM, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> > On Sun, Mar 19, 2017 at 04:05:16PM +0000, Ben Hutchings wrote:
> >> On Thu, 2017-03-16 at 23:29 +0900, Greg Kroah-Hartman wrote:
> >> > 4.4-stable review patch.  If anyone has any objections, please let me know.
> >> >
> >> > ------------------
> >> >
> >> > From: Arnd Bergmann <arnd@arndb.de>
> >> >
> >> > commit 9ddc16ad8e0bc7742fc96d5aaabc5b8698512cd1 upstream.
> >> >
> >> > In linux-4.10-rc, NF_CT_PROTO_UDPLITE and NF_CT_PROTO_DCCP are bool
> >> > symbols instead of tristate, and kernelci.org reports a bunch of
> >> > warnings for this, like:
> >> >
> >> > arch/mips/configs/malta_kvm_guest_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
> >> > arch/mips/configs/malta_defconfig:62:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
> >> > arch/mips/configs/malta_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
> >> > arch/mips/configs/ip22_defconfig:70:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
> >> > arch/mips/configs/ip22_defconfig:71:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
> >> >
> >> > This changes all the MIPS defconfigs with these symbols to have them
> >> > built-in.
> >> >
> >> > Fixes: 9b91c96c5d1f ("netfilter: conntrack: built-in support for UDPlite")
> >> > Fixes: c51d39010a1b ("netfilter: conntrack: built-in support for DCCP")
> >> [...]
> >>
> >> I don't think this was needed for 4.4 or 4.9, as those symbols were
> >> still tristate type.
> >
> > I don't know, Arnd was the one that reported it to me.
> >
> > Arnd?
> 
> I thought I had only reported it for the v4.10-stable tree. I was a bit vague
> about which of the ones I reported were needed on older trees as well,
> but the changelog text is fairly specific.

You reported it there, but then on your other emails for other stable
trees, said that your previously mentioned patches fixed problems in
these trees as well.  A bit confusing, sorry I got it wrong.

Anyway, not a big deal, is this worth me reverting?  Does this cause an
issue with these arches on older kernels?

thanks,

greg k-h

Re: [PATCH 4.4 04/35] MIPS: Update defconfigs for NF_CT_PROTO_DCCP/UDPLITE change

[Ralf Baechle]

On Mon, Mar 20, 2017 at 05:29:30PM +0100, Greg Kroah-Hartman wrote:

> You reported it there, but then on your other emails for other stable
> trees, said that your previously mentioned patches fixed problems in
> these trees as well.  A bit confusing, sorry I got it wrong.
> 
> Anyway, not a big deal, is this worth me reverting?  Does this cause an
> issue with these arches on older kernels?

Can't imagine this is going to cause an issue and in case of doubt a "y"
should be safer than a "m" anyway ...

  Ralf

[PATCH 4.4 05/35] MIPS: ip27: Disable qlge driver in defconfig

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit b617649468390713db1515ea79fc772d2eb897a8 upstream.

One of the last remaining failures in kernelci.org is for a gcc bug:

drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: error: insn does not satisfy its constraints:
drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: internal compiler error: in extract_constrain_insn, at recog.c:2190

This is apparently broken in gcc-6 but fixed in gcc-7, and I cannot
reproduce the problem here. However, it is clear that ip27_defconfig
does not actually need this driver as the platform has only PCI-X but
not PCIe, and the qlge adapter in turn is PCIe-only.

The driver was originally enabled in 2010 along with lots of other
drivers.

Fixes: 59d302b342e5 ("MIPS: IP27: Make defconfig useful again.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15197/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/configs/ip27_defconfig |    1 -
 1 file changed, 1 deletion(-)

--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -206,7 +206,6 @@ CONFIG_MLX4_EN=m
 # CONFIG_MLX4_DEBUG is not set
 CONFIG_TEHUTI=m
 CONFIG_BNX2X=m
-CONFIG_QLGE=m
 CONFIG_SFC=m
 CONFIG_BE2NET=m
 CONFIG_LIBERTAS_THINFIRM=m

[PATCH 4.4 06/35] MIPS: Update ip27_defconfig for SCSI_DH change

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit ea58fca1842a5dc410cae4167b01643db971a4e2 upstream.

Since linux-4.3, SCSI_DH is a bool symbol, causing a warning in
kernelci.org:

arch/mips/configs/ip27_defconfig:136:warning: symbol value 'm' invalid for SCSI_DH

This updates the defconfig to have the feature built-in.

Fixes: 086b91d052eb ("scsi_dh: integrate into the core SCSI code")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15001/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/configs/ip27_defconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -134,7 +134,7 @@ CONFIG_LIBFC=m
 CONFIG_SCSI_QLOGIC_1280=y
 CONFIG_SCSI_PMCRAID=m
 CONFIG_SCSI_BFA_FC=m
-CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH=y
 CONFIG_SCSI_DH_RDAC=m
 CONFIG_SCSI_DH_HP_SW=m
 CONFIG_SCSI_DH_EMC=m

[PATCH 4.4 07/35] MIPS: ip22: Fix ip28 build for modern gcc

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit 23ca9b522383d3b9b7991d8586db30118992af4a upstream.

kernelci reports a failure of the ip28_defconfig build after upgrading its
gcc version:

arch/mips/sgi-ip22/Platform:29: *** gcc doesn't support needed option -mr10k-cache-barrier=store.  Stop.

The problem apparently is that the -mr10k-cache-barrier=store option is now
rejected for CPUs other than r10k. Explicitly including the CPU in the
check fixes this and is safe because both options were introduced in
gcc-4.4.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15049/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/sgi-ip22/Platform |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/sgi-ip22/Platform
+++ b/arch/mips/sgi-ip22/Platform
@@ -25,7 +25,7 @@ endif
 # Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys
 #
 ifdef CONFIG_SGI_IP28
-  ifeq ($(call cc-option-yn,-mr10k-cache-barrier=store), n)
+  ifeq ($(call cc-option-yn,-march=r10000 -mr10k-cache-barrier=store), n)
       $(error gcc doesn't support needed option -mr10k-cache-barrier=store)
   endif
 endif

[PATCH 4.4 08/35] MIPS: Update lemote2f_defconfig for CPU_FREQ_STAT change

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit b3f6046186ef45acfeebc5a59c9fb45cefc685e7 upstream.

Since linux-4.8, CPU_FREQ_STAT is a bool symbol, causing a warning in
kernelci.org:

arch/mips/configs/lemote2f_defconfig:42:warning: symbol value 'm' invalid for CPU_FREQ_STAT

This updates the defconfig to have the feature built-in.

Fixes: 1aefc75b2449 ("cpufreq: stats: Make the stats code non-modular")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15000/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/configs/lemote2f_defconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -39,7 +39,7 @@ CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION="/dev/hda3"
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m

Re: [PATCH 4.4 08/35] MIPS: Update lemote2f_defconfig for CPU_FREQ_STAT change

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 836 bytes --]

On Thu, 2017-03-16 at 23:29 +0900, Greg Kroah-Hartman wrote:
> 4.4-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Arnd Bergmann <arnd@arndb.de>
> 
> commit b3f6046186ef45acfeebc5a59c9fb45cefc685e7 upstream.
> 
> Since linux-4.8, CPU_FREQ_STAT is a bool symbol, causing a warning in
> kernelci.org:
> 
> arch/mips/configs/lemote2f_defconfig:42:warning: symbol value 'm' invalid for CPU_FREQ_STAT
> 
> This updates the defconfig to have the feature built-in.
> 
> Fixes: 1aefc75b2449 ("cpufreq: stats: Make the stats code non-modular")
[...]

So not needed for 4.4?

Ben.

-- 
Ben Hutchings
Power corrupts.  Absolute power is kind of neat.
                           - John Lehman, Secretary of the US Navy
1981-1987


[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 4.4 08/35] MIPS: Update lemote2f_defconfig for CPU_FREQ_STAT change

[Ralf Baechle]

On Sun, Mar 19, 2017 at 04:06:19PM +0000, Ben Hutchings wrote:

> On Thu, 2017-03-16 at 23:29 +0900, Greg Kroah-Hartman wrote:
> > 4.4-stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Arnd Bergmann <arnd@arndb.de>
> > 
> > commit b3f6046186ef45acfeebc5a59c9fb45cefc685e7 upstream.
> > 
> > Since linux-4.8, CPU_FREQ_STAT is a bool symbol, causing a warning in
> > kernelci.org:
> > 
> > arch/mips/configs/lemote2f_defconfig:42:warning: symbol value 'm' invalid for CPU_FREQ_STAT
> > 
> > This updates the defconfig to have the feature built-in.
> > 
> > Fixes: 1aefc75b2449 ("cpufreq: stats: Make the stats code non-modular")
> [...]
> 
> So not needed for 4.4?

I don't think so, I don't get warnings for "make ARCH=mips lemote2f_defconfig"

  Ralf

Re: [PATCH 4.4 08/35] MIPS: Update lemote2f_defconfig for CPU_FREQ_STAT change

[Ralf Baechle]

On Sun, Mar 19, 2017 at 04:06:19PM +0000, Ben Hutchings wrote:

> On Thu, 2017-03-16 at 23:29 +0900, Greg Kroah-Hartman wrote:
> > 4.4-stable review patch.��If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Arnd Bergmann <arnd@arndb.de>
> > 
> > commit b3f6046186ef45acfeebc5a59c9fb45cefc685e7 upstream.
> > 
> > Since linux-4.8, CPU_FREQ_STAT is a bool symbol, causing a warning in
> > kernelci.org:
> > 
> > arch/mips/configs/lemote2f_defconfig:42:warning: symbol value 'm' invalid for CPU_FREQ_STAT
> > 
> > This updates the defconfig to have the feature built-in.
> > 
> > Fixes: 1aefc75b2449 ("cpufreq: stats: Make the stats code non-modular")
> [...]
> 
> So not needed for 4.4?

I don't think so, I don't get warnings for "make ARCH=mips lemote2f_defconfig"

  Ralf

Re: [PATCH 4.4 08/35] MIPS: Update lemote2f_defconfig for CPU_FREQ_STAT change

[Greg Kroah-Hartman]

On Mon, Mar 20, 2017 at 11:15:30AM +0100, Ralf Baechle wrote:
> On Sun, Mar 19, 2017 at 04:06:19PM +0000, Ben Hutchings wrote:
> 
> > On Thu, 2017-03-16 at 23:29 +0900, Greg Kroah-Hartman wrote:
> > > 4.4-stable review patch.  If anyone has any objections, please let me know.
> > > 
> > > ------------------
> > > 
> > > From: Arnd Bergmann <arnd@arndb.de>
> > > 
> > > commit b3f6046186ef45acfeebc5a59c9fb45cefc685e7 upstream.
> > > 
> > > Since linux-4.8, CPU_FREQ_STAT is a bool symbol, causing a warning in
> > > kernelci.org:
> > > 
> > > arch/mips/configs/lemote2f_defconfig:42:warning: symbol value 'm' invalid for CPU_FREQ_STAT
> > > 
> > > This updates the defconfig to have the feature built-in.
> > > 
> > > Fixes: 1aefc75b2449 ("cpufreq: stats: Make the stats code non-modular")
> > [...]
> > 
> > So not needed for 4.4?
> 
> I don't think so, I don't get warnings for "make ARCH=mips lemote2f_defconfig"

Ok, is it worth reverting as this is an issue on later kernels?

thanks,

greg k-h

Re: [PATCH 4.4 08/35] MIPS: Update lemote2f_defconfig for CPU_FREQ_STAT change

[Greg Kroah-Hartman]

On Mon, Mar 20, 2017 at 11:15:30AM +0100, Ralf Baechle wrote:
> On Sun, Mar 19, 2017 at 04:06:19PM +0000, Ben Hutchings wrote:
> 
> > On Thu, 2017-03-16 at 23:29 +0900, Greg Kroah-Hartman wrote:
> > > 4.4-stable review patch.��If anyone has any objections, please let me know.
> > > 
> > > ------------------
> > > 
> > > From: Arnd Bergmann <arnd@arndb.de>
> > > 
> > > commit b3f6046186ef45acfeebc5a59c9fb45cefc685e7 upstream.
> > > 
> > > Since linux-4.8, CPU_FREQ_STAT is a bool symbol, causing a warning in
> > > kernelci.org:
> > > 
> > > arch/mips/configs/lemote2f_defconfig:42:warning: symbol value 'm' invalid for CPU_FREQ_STAT
> > > 
> > > This updates the defconfig to have the feature built-in.
> > > 
> > > Fixes: 1aefc75b2449 ("cpufreq: stats: Make the stats code non-modular")
> > [...]
> > 
> > So not needed for 4.4?
> 
> I don't think so, I don't get warnings for "make ARCH=mips lemote2f_defconfig"

Ok, is it worth reverting as this is an issue on later kernels?

thanks,

greg k-h

Re: [PATCH 4.4 08/35] MIPS: Update lemote2f_defconfig for CPU_FREQ_STAT change

[Ralf Baechle]

On Mon, Mar 20, 2017 at 05:29:57PM +0100, Greg Kroah-Hartman wrote:

> > I don't think so, I don't get warnings for "make ARCH=mips lemote2f_defconfig"
> 
> Ok, is it worth reverting as this is an issue on later kernels?

Same answer as for the other patch - I can't imagine it's going to cause
any problems.

  Ralf

Re: [PATCH 4.4 08/35] MIPS: Update lemote2f_defconfig for CPU_FREQ_STAT change

[Greg Kroah-Hartman]

On Mon, Mar 20, 2017 at 05:50:49PM +0100, Ralf Baechle wrote:
> On Mon, Mar 20, 2017 at 05:29:57PM +0100, Greg Kroah-Hartman wrote:
> 
> > > I don't think so, I don't get warnings for "make ARCH=mips lemote2f_defconfig"
> > 
> > Ok, is it worth reverting as this is an issue on later kernels?
> 
> Same answer as for the other patch - I can't imagine it's going to cause
> any problems.

Thanks for the response, will leave these as-is.

greg k-h

Re: [PATCH 4.4 08/35] MIPS: Update lemote2f_defconfig for CPU_FREQ_STAT change

[Greg Kroah-Hartman]

On Sun, Mar 19, 2017 at 04:06:19PM +0000, Ben Hutchings wrote:
> On Thu, 2017-03-16 at 23:29 +0900, Greg Kroah-Hartman wrote:
> > 4.4-stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Arnd Bergmann <arnd@arndb.de>
> > 
> > commit b3f6046186ef45acfeebc5a59c9fb45cefc685e7 upstream.
> > 
> > Since linux-4.8, CPU_FREQ_STAT is a bool symbol, causing a warning in
> > kernelci.org:
> > 
> > arch/mips/configs/lemote2f_defconfig:42:warning: symbol value 'm' invalid for CPU_FREQ_STAT
> > 
> > This updates the defconfig to have the feature built-in.
> > 
> > Fixes: 1aefc75b2449 ("cpufreq: stats: Make the stats code non-modular")
> [...]
> 
> So not needed for 4.4?

Same again, Arnd asked for it to be applied.

thanks,

greg k-h

Re: [PATCH 4.4 08/35] MIPS: Update lemote2f_defconfig for CPU_FREQ_STAT change

[Greg Kroah-Hartman]

On Sun, Mar 19, 2017 at 04:06:19PM +0000, Ben Hutchings wrote:
> On Thu, 2017-03-16 at 23:29 +0900, Greg Kroah-Hartman wrote:
> > 4.4-stable review patch.��If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Arnd Bergmann <arnd@arndb.de>
> > 
> > commit b3f6046186ef45acfeebc5a59c9fb45cefc685e7 upstream.
> > 
> > Since linux-4.8, CPU_FREQ_STAT is a bool symbol, causing a warning in
> > kernelci.org:
> > 
> > arch/mips/configs/lemote2f_defconfig:42:warning: symbol value 'm' invalid for CPU_FREQ_STAT
> > 
> > This updates the defconfig to have the feature built-in.
> > 
> > Fixes: 1aefc75b2449 ("cpufreq: stats: Make the stats code non-modular")
> [...]
> 
> So not needed for 4.4?

Same again, Arnd asked for it to be applied.

thanks,

greg k-h

[PATCH 4.4 09/35] mtd: pmcmsp: use kstrndup instead of kmalloc+strncpy

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit 906b268477bc03daaa04f739844c120fe4dbc991 upstream.

kernelci.org reports a warning for this driver, as it copies a local
variable into a 'const char *' string:

    drivers/mtd/maps/pmcmsp-flash.c:149:30: warning: passing argument 1 of 'strncpy' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]

Using kstrndup() simplifies the code and avoids the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/maps/pmcmsp-flash.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/mtd/maps/pmcmsp-flash.c
+++ b/drivers/mtd/maps/pmcmsp-flash.c
@@ -139,15 +139,13 @@ static int __init init_msp_flash(void)
 		}
 
 		msp_maps[i].bankwidth = 1;
-		msp_maps[i].name = kmalloc(7, GFP_KERNEL);
+		msp_maps[i].name = kstrndup(flash_name, 7, GFP_KERNEL);
 		if (!msp_maps[i].name) {
 			iounmap(msp_maps[i].virt);
 			kfree(msp_parts[i]);
 			goto cleanup_loop;
 		}
 
-		msp_maps[i].name = strncpy(msp_maps[i].name, flash_name, 7);
-
 		for (j = 0; j < pcnt; j++) {
 			part_name[5] = '0' + i;
 			part_name[7] = '0' + j;

[PATCH 4.4 10/35] MIPS: ralink: Cosmetic change to prom_init().

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Crispin <john@phrozen.org>

commit 9c48568b3692f1a56cbf1935e4eea835e6b185b1 upstream.

Over the years the code has been changed various times leading to
argc/argv being defined in a different function to where we actually
use the variables. Clean this up by moving them to prom_init_cmdline().

Signed-off-by: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14902/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/ralink/prom.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

--- a/arch/mips/ralink/prom.c
+++ b/arch/mips/ralink/prom.c
@@ -30,8 +30,10 @@ const char *get_system_type(void)
 	return soc_info.sys_type;
 }
 
-static __init void prom_init_cmdline(int argc, char **argv)
+static __init void prom_init_cmdline(void)
 {
+	int argc;
+	char **argv;
 	int i;
 
 	pr_debug("prom: fw_arg0=%08x fw_arg1=%08x fw_arg2=%08x fw_arg3=%08x\n",
@@ -60,14 +62,11 @@ static __init void prom_init_cmdline(int
 
 void __init prom_init(void)
 {
-	int argc;
-	char **argv;
-
 	prom_soc_init(&soc_info);
 
 	pr_info("SoC Type: %s\n", get_system_type());
 
-	prom_init_cmdline(argc, argv);
+	prom_init_cmdline();
 }
 
 void __init prom_free_prom_memory(void)

[PATCH 4.4 11/35] MIPS: ralink: Remove unused rt*_wdt_reset functions

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit 886f9c69fc68f56ddea34d3de51ac1fc2ac8dfbc upstream.

All pointers to these functions were removed, so now they produce
warnings:

arch/mips/ralink/rt305x.c:92:13: error: 'rt305x_wdt_reset' defined but not used [-Werror=unused-function]

This removes the functions. If we need them again, the patch can be
reverted later.

Fixes: f576fb6a0700 ("MIPS: ralink: cleanup the soc specific pinmux data")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: John Crispin <john@phrozen.org>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15044/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/ralink/rt288x.c |   10 ----------
 arch/mips/ralink/rt305x.c |   11 -----------
 arch/mips/ralink/rt3883.c |   10 ----------
 3 files changed, 31 deletions(-)

--- a/arch/mips/ralink/rt288x.c
+++ b/arch/mips/ralink/rt288x.c
@@ -40,16 +40,6 @@ static struct rt2880_pmx_group rt2880_pi
 	{ 0 }
 };
 
-static void rt288x_wdt_reset(void)
-{
-	u32 t;
-
-	/* enable WDT reset output on pin SRAM_CS_N */
-	t = rt_sysc_r32(SYSC_REG_CLKCFG);
-	t |= CLKCFG_SRAM_CS_N_WDT;
-	rt_sysc_w32(t, SYSC_REG_CLKCFG);
-}
-
 void __init ralink_clk_init(void)
 {
 	unsigned long cpu_rate, wmac_rate = 40000000;
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -89,17 +89,6 @@ static struct rt2880_pmx_group rt5350_pi
 	{ 0 }
 };
 
-static void rt305x_wdt_reset(void)
-{
-	u32 t;
-
-	/* enable WDT reset output on pin SRAM_CS_N */
-	t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
-	t |= RT305X_SYSCFG_SRAM_CS0_MODE_WDT <<
-		RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT;
-	rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG);
-}
-
 static unsigned long rt5350_get_mem_size(void)
 {
 	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
--- a/arch/mips/ralink/rt3883.c
+++ b/arch/mips/ralink/rt3883.c
@@ -63,16 +63,6 @@ static struct rt2880_pmx_group rt3883_pi
 	{ 0 }
 };
 
-static void rt3883_wdt_reset(void)
-{
-	u32 t;
-
-	/* enable WDT reset output on GPIO 2 */
-	t = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG1);
-	t |= RT3883_SYSCFG1_GPIO2_AS_WDT_OUT;
-	rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1);
-}
-
 void __init ralink_clk_init(void)
 {
 	unsigned long cpu_rate, sys_rate;

[PATCH 4.4 12/35] cpmac: remove hopeless #warning

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit d43e6fb4ac4abfe4ef7c102833ed02330ad701e0 upstream.

The #warning was present 10 years ago when the driver first got merged.
As the platform is rather obsolete by now, it seems very unlikely that
the warning will cause anyone to fix the code properly.

kernelci.org reports the warning for every build in the meantime, so
I think it's better to just turn it into a code comment to reduce
noise.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/ti/cpmac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/ti/cpmac.c
+++ b/drivers/net/ethernet/ti/cpmac.c
@@ -1237,7 +1237,7 @@ int cpmac_init(void)
 		goto fail_alloc;
 	}
 
-#warning FIXME: unhardcode gpio&reset bits
+	/* FIXME: unhardcode gpio&reset bits */
 	ar7_gpio_disable(26);
 	ar7_gpio_disable(27);
 	ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);

[PATCH 4.4 13/35] mm: memcontrol: avoid unused function warning

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit 358c07fcc3b60ab08d77f1684de8bd81bcf49a1a upstream.

A bugfix in v4.8-rc2 introduced a harmless warning when
CONFIG_MEMCG_SWAP is disabled but CONFIG_MEMCG is enabled:

  mm/memcontrol.c:4085:27: error: 'mem_cgroup_id_get_online' defined but not used [-Werror=unused-function]
   static struct mem_cgroup *mem_cgroup_id_get_online(struct mem_cgroup *memcg)

This moves the function inside of the #ifdef block that hides the
calling function, to avoid the warning.

Fixes: 1f47b61fb407 ("mm: memcontrol: fix swap counter leak on swapout from offline cgroup")
Link: http://lkml.kernel.org/r/20160824113733.2776701-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/memcontrol.c |   36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -4150,24 +4150,6 @@ static void mem_cgroup_id_get_many(struc
 	atomic_add(n, &memcg->id.ref);
 }
 
-static struct mem_cgroup *mem_cgroup_id_get_online(struct mem_cgroup *memcg)
-{
-	while (!atomic_inc_not_zero(&memcg->id.ref)) {
-		/*
-		 * The root cgroup cannot be destroyed, so it's refcount must
-		 * always be >= 1.
-		 */
-		if (WARN_ON_ONCE(memcg == root_mem_cgroup)) {
-			VM_BUG_ON(1);
-			break;
-		}
-		memcg = parent_mem_cgroup(memcg);
-		if (!memcg)
-			memcg = root_mem_cgroup;
-	}
-	return memcg;
-}
-
 static void mem_cgroup_id_put_many(struct mem_cgroup *memcg, unsigned int n)
 {
 	if (atomic_sub_and_test(n, &memcg->id.ref)) {
@@ -5751,6 +5733,24 @@ static int __init mem_cgroup_init(void)
 subsys_initcall(mem_cgroup_init);
 
 #ifdef CONFIG_MEMCG_SWAP
+static struct mem_cgroup *mem_cgroup_id_get_online(struct mem_cgroup *memcg)
+{
+	while (!atomic_inc_not_zero(&memcg->id.ref)) {
+		/*
+		 * The root cgroup cannot be destroyed, so it's refcount must
+		 * always be >= 1.
+		 */
+		if (WARN_ON_ONCE(memcg == root_mem_cgroup)) {
+			VM_BUG_ON(1);
+			break;
+		}
+		memcg = parent_mem_cgroup(memcg);
+		if (!memcg)
+			memcg = root_mem_cgroup;
+	}
+	return memcg;
+}
+
 /**
  * mem_cgroup_swapout - transfer a memsw charge to swap
  * @page: page whose memsw charge to transfer

[PATCH 4.4 14/35] MIPS: DEC: Avoid la pseudo-instruction in delay slots

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ralf Baechle <ralf@linux-mips.org>

commit 3021773c7c3e75e20b693931a19362681e744ea9 upstream.

When expanding the la or dla pseudo-instruction in a delay slot the GNU
assembler will complain should the pseudo-instruction expand to multiple
actual instructions, since only the first of them will be in the delay
slot leading to the pseudo-instruction being only partially executed if
the branch is taken. Use of PTR_LA in the dec int-handler.S leads to
such warnings:

  arch/mips/dec/int-handler.S: Assembler messages:
  arch/mips/dec/int-handler.S:149: Warning: macro instruction expanded into multiple instructions in a branch delay slot
  arch/mips/dec/int-handler.S:198: Warning: macro instruction expanded into multiple instructions in a branch delay slot

Avoid this by open coding the PTR_LA macros.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/dec/int-handler.S |   40 ++++++++++++++++++++++++++++++++++++++--
 1 file changed, 38 insertions(+), 2 deletions(-)

--- a/arch/mips/dec/int-handler.S
+++ b/arch/mips/dec/int-handler.S
@@ -146,7 +146,25 @@
 		/*
 		 * Find irq with highest priority
 		 */
-		 PTR_LA	t1,cpu_mask_nr_tbl
+		# open coded PTR_LA t1, cpu_mask_nr_tbl
+#if (_MIPS_SZPTR == 32)
+		# open coded la t1, cpu_mask_nr_tbl
+		lui	t1, %hi(cpu_mask_nr_tbl)
+		addiu	t1, %lo(cpu_mask_nr_tbl)
+
+#endif
+#if (_MIPS_SZPTR == 64)
+		# open coded dla t1, cpu_mask_nr_tbl
+		.set	push
+		.set	noat
+		lui	t1, %highest(cpu_mask_nr_tbl)
+		lui	AT, %hi(cpu_mask_nr_tbl)
+		daddiu	t1, t1, %higher(cpu_mask_nr_tbl)
+		daddiu	AT, AT, %lo(cpu_mask_nr_tbl)
+		dsll	t1, 32
+		daddu	t1, t1, AT
+		.set	pop
+#endif
 1:		lw	t2,(t1)
 		nop
 		and	t2,t0
@@ -195,7 +213,25 @@
 		/*
 		 * Find irq with highest priority
 		 */
-		 PTR_LA	t1,asic_mask_nr_tbl
+		# open coded PTR_LA t1,asic_mask_nr_tbl
+#if (_MIPS_SZPTR == 32)
+		# open coded la t1, asic_mask_nr_tbl
+		lui	t1, %hi(asic_mask_nr_tbl)
+		addiu	t1, %lo(asic_mask_nr_tbl)
+
+#endif
+#if (_MIPS_SZPTR == 64)
+		# open coded dla t1, asic_mask_nr_tbl
+		.set	push
+		.set	noat
+		lui	t1, %highest(asic_mask_nr_tbl)
+		lui	AT, %hi(asic_mask_nr_tbl)
+		daddiu	t1, t1, %higher(asic_mask_nr_tbl)
+		daddiu	AT, AT, %lo(asic_mask_nr_tbl)
+		dsll	t1, 32
+		daddu	t1, t1, AT
+		.set	pop
+#endif
 2:		lw	t2,(t1)
 		nop
 		and	t2,t0

[PATCH 4.4 15/35] MIPS: Netlogic: Fix CP0_EBASE redefinition warnings

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit 32eb6e8bee147b45e5e59230630d59541ccbb6e5 upstream.

A couple of netlogic assembly files define CP0_EBASE to $15, the same as
CP0_PRID in mipsregs.h, and use it for accessing both CP0_PRId and
CP0_EBase registers. However commit 609cf6f2291a ("MIPS: CPS: Early
debug using an ns16550-compatible UART") added a different definition of
CP0_EBASE to mipsregs.h, which included a register select of 1. This
causes harmless build warnings like the following:

  arch/mips/netlogic/common/reset.S:53:0: warning: "CP0_EBASE" redefined
  #define CP0_EBASE $15
  ^
  In file included from arch/mips/netlogic/common/reset.S:41:0:
  ./arch/mips/include/asm/mipsregs.h:63:0: note: this is the location of the previous definition
  #define CP0_EBASE $15, 1
  ^

Update the code to use the definitions from mipsregs.h for accessing
both registers.

Fixes: 609cf6f2291a ("MIPS: CPS: Early debug using an ns16550-compatible UART")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13183/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/netlogic/common/reset.S   |   11 +++++------
 arch/mips/netlogic/common/smpboot.S |    4 +---
 2 files changed, 6 insertions(+), 9 deletions(-)

--- a/arch/mips/netlogic/common/reset.S
+++ b/arch/mips/netlogic/common/reset.S
@@ -50,7 +50,6 @@
 #include <asm/netlogic/xlp-hal/sys.h>
 #include <asm/netlogic/xlp-hal/cpucontrol.h>
 
-#define CP0_EBASE	$15
 #define SYS_CPU_COHERENT_BASE	CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \
 			XLP_IO_SYS_OFFSET(0) + XLP_IO_PCI_HDRSZ + \
 			SYS_CPU_NONCOHERENT_MODE * 4
@@ -92,7 +91,7 @@
  * registers. On XLPII CPUs, usual cache instructions work.
  */
 .macro	xlp_flush_l1_dcache
-	mfc0	t0, CP0_EBASE, 0
+	mfc0	t0, CP0_PRID
 	andi	t0, t0, PRID_IMP_MASK
 	slt	t1, t0, 0x1200
 	beqz	t1, 15f
@@ -171,7 +170,7 @@ FEXPORT(nlm_reset_entry)
 	nop
 
 1:	/* Entry point on core wakeup */
-	mfc0	t0, CP0_EBASE, 0	/* processor ID */
+	mfc0	t0, CP0_PRID		/* processor ID */
 	andi	t0, PRID_IMP_MASK
 	li	t1, 0x1500		/* XLP 9xx */
 	beq	t0, t1, 2f		/* does not need to set coherent */
@@ -182,8 +181,8 @@ FEXPORT(nlm_reset_entry)
 	nop
 
 	/* set bit in SYS coherent register for the core */
-	mfc0	t0, CP0_EBASE, 1
-	mfc0	t1, CP0_EBASE, 1
+	mfc0	t0, CP0_EBASE
+	mfc0	t1, CP0_EBASE
 	srl	t1, 5
 	andi	t1, 0x3			/* t1 <- node */
 	li	t2, 0x40000
@@ -232,7 +231,7 @@ EXPORT(nlm_boot_siblings)
 
 	 * NOTE: All GPR contents are lost after the mtcr above!
 	 */
-	mfc0	v0, CP0_EBASE, 1
+	mfc0	v0, CP0_EBASE
 	andi	v0, 0x3ff		/* v0 <- node/core */
 
 	/*
--- a/arch/mips/netlogic/common/smpboot.S
+++ b/arch/mips/netlogic/common/smpboot.S
@@ -48,8 +48,6 @@
 #include <asm/netlogic/xlp-hal/sys.h>
 #include <asm/netlogic/xlp-hal/cpucontrol.h>
 
-#define CP0_EBASE	$15
-
 	.set	noreorder
 	.set	noat
 	.set	arch=xlr		/* for mfcr/mtcr, XLR is sufficient */
@@ -86,7 +84,7 @@ NESTED(nlm_boot_secondary_cpus, 16, sp)
 	PTR_L	gp, 0(t1)
 
 	/* a0 has the processor id */
-	mfc0	a0, CP0_EBASE, 1
+	mfc0	a0, CP0_EBASE
 	andi	a0, 0x3ff		/* a0 <- node/core */
 	PTR_LA	t0, nlm_early_init_secondary
 	jalr	t0

[PATCH 4.4 16/35] tracing: Add #undef to fix compile error

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rik van Riel <riel@redhat.com>

commit bf7165cfa23695c51998231c4efa080fe1d3548d upstream.

There are several trace include files that define TRACE_INCLUDE_FILE.

Include several of them in the same .c file (as I currently have in
some code I am working on), and the compile will blow up with a
"warning: "TRACE_INCLUDE_FILE" redefined #define TRACE_INCLUDE_FILE syscalls"

Every other include file in include/trace/events/ avoids that issue
by having a #undef TRACE_INCLUDE_FILE before the #define; syscalls.h
should have one, too.

Link: http://lkml.kernel.org/r/20160928225554.13bd7ac6@annuminas.surriel.com

Fixes: b8007ef74222 ("tracing: Separate raw syscall from syscall tracer")
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/trace/events/syscalls.h |    1 +
 1 file changed, 1 insertion(+)

--- a/include/trace/events/syscalls.h
+++ b/include/trace/events/syscalls.h
@@ -1,5 +1,6 @@
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM raw_syscalls
+#undef TRACE_INCLUDE_FILE
 #define TRACE_INCLUDE_FILE syscalls
 
 #if !defined(_TRACE_EVENTS_SYSCALLS_H) || defined(TRACE_HEADER_MULTI_READ)

[PATCH 4.4 17/35] powerpc: Emulation support for load/store instructions on LE

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>

commit e148bd17f48bd17fca2f4f089ec879fa6e47e34c upstream.

emulate_step() uses a number of underlying kernel functions that were
initially not enabled for LE. This has been rectified since. So, fix
emulate_step() for LE for the corresponding instructions.

Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/lib/sstep.c |   20 --------------------
 1 file changed, 20 deletions(-)

--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -1806,8 +1806,6 @@ int __kprobes emulate_step(struct pt_reg
 		goto instr_done;
 
 	case LARX:
-		if (regs->msr & MSR_LE)
-			return 0;
 		if (op.ea & (size - 1))
 			break;		/* can't handle misaligned */
 		err = -EFAULT;
@@ -1829,8 +1827,6 @@ int __kprobes emulate_step(struct pt_reg
 		goto ldst_done;
 
 	case STCX:
-		if (regs->msr & MSR_LE)
-			return 0;
 		if (op.ea & (size - 1))
 			break;		/* can't handle misaligned */
 		err = -EFAULT;
@@ -1854,8 +1850,6 @@ int __kprobes emulate_step(struct pt_reg
 		goto ldst_done;
 
 	case LOAD:
-		if (regs->msr & MSR_LE)
-			return 0;
 		err = read_mem(&regs->gpr[op.reg], op.ea, size, regs);
 		if (!err) {
 			if (op.type & SIGNEXT)
@@ -1867,8 +1861,6 @@ int __kprobes emulate_step(struct pt_reg
 
 #ifdef CONFIG_PPC_FPU
 	case LOAD_FP:
-		if (regs->msr & MSR_LE)
-			return 0;
 		if (size == 4)
 			err = do_fp_load(op.reg, do_lfs, op.ea, size, regs);
 		else
@@ -1877,15 +1869,11 @@ int __kprobes emulate_step(struct pt_reg
 #endif
 #ifdef CONFIG_ALTIVEC
 	case LOAD_VMX:
-		if (regs->msr & MSR_LE)
-			return 0;
 		err = do_vec_load(op.reg, do_lvx, op.ea & ~0xfUL, regs);
 		goto ldst_done;
 #endif
 #ifdef CONFIG_VSX
 	case LOAD_VSX:
-		if (regs->msr & MSR_LE)
-			return 0;
 		err = do_vsx_load(op.reg, do_lxvd2x, op.ea, regs);
 		goto ldst_done;
 #endif
@@ -1908,8 +1896,6 @@ int __kprobes emulate_step(struct pt_reg
 		goto instr_done;
 
 	case STORE:
-		if (regs->msr & MSR_LE)
-			return 0;
 		if ((op.type & UPDATE) && size == sizeof(long) &&
 		    op.reg == 1 && op.update_reg == 1 &&
 		    !(regs->msr & MSR_PR) &&
@@ -1922,8 +1908,6 @@ int __kprobes emulate_step(struct pt_reg
 
 #ifdef CONFIG_PPC_FPU
 	case STORE_FP:
-		if (regs->msr & MSR_LE)
-			return 0;
 		if (size == 4)
 			err = do_fp_store(op.reg, do_stfs, op.ea, size, regs);
 		else
@@ -1932,15 +1916,11 @@ int __kprobes emulate_step(struct pt_reg
 #endif
 #ifdef CONFIG_ALTIVEC
 	case STORE_VMX:
-		if (regs->msr & MSR_LE)
-			return 0;
 		err = do_vec_store(op.reg, do_stvx, op.ea & ~0xfUL, regs);
 		goto ldst_done;
 #endif
 #ifdef CONFIG_VSX
 	case STORE_VSX:
-		if (regs->msr & MSR_LE)
-			return 0;
 		err = do_vsx_store(op.reg, do_stxvd2x, op.ea, regs);
 		goto ldst_done;
 #endif

[PATCH 4.4 18/35] usb: gadget: dummy_hcd: clear usb_gadget region before registration

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Chen <peter.chen@nxp.com>

commit 5bbc852676ae08e818241cf66a3ffe4be44225c4 upstream.

When the user does device unbind and rebind test, the kernel will
show below dump due to usb_gadget memory region is dirty after unbind.
Clear usb_gadget region for every new probe.

root@imx6qdlsolo:/sys/bus/platform/drivers/dummy_udc# echo dummy_udc.0 > bind
[  102.523312] kobject (eddd78b0): tried to init an initialized object, something is seriously wrong.
[  102.532447] CPU: 0 PID: 734 Comm: sh Not tainted 4.10.0-rc7-00872-g1b2b8e9 #1298
[  102.539866] Hardware name: Freescale i.MX6 SoloX (Device Tree)
[  102.545717] Backtrace:
[  102.548225] [<c010d090>] (dump_backtrace) from [<c010d338>] (show_stack+0x18/0x1c)
[  102.555822]  r7:ede34000 r6:60010013 r5:00000000 r4:c0f29418
[  102.561512] [<c010d320>] (show_stack) from [<c040c2a4>] (dump_stack+0xb4/0xe8)
[  102.568764] [<c040c1f0>] (dump_stack) from [<c040e6d4>] (kobject_init+0x80/0x9c)
[  102.576187]  r10:0000001f r9:eddd7000 r8:eeaf8c10 r7:eddd78a8 r6:c177891c r5:c0f3b060
[  102.584036]  r4:eddd78b0 r3:00000000
[  102.587641] [<c040e654>] (kobject_init) from [<c05359a4>] (device_initialize+0x28/0xf8)
[  102.595665]  r5:eebc4800 r4:eddd78a8
[  102.599268] [<c053597c>] (device_initialize) from [<c05382ac>] (device_register+0x14/0x20)
[  102.607556]  r7:eddd78a8 r6:00000000 r5:eebc4800 r4:eddd78a8
[  102.613256] [<c0538298>] (device_register) from [<c0668ef4>] (usb_add_gadget_udc_release+0x8c/0x1ec)
[  102.622410]  r5:eebc4800 r4:eddd7860
[  102.626015] [<c0668e68>] (usb_add_gadget_udc_release) from [<c0669068>] (usb_add_gadget_udc+0x14/0x18)
[  102.635351]  r10:0000001f r9:eddd7000 r8:eddd788c r7:bf003770 r6:eddd77f8 r5:eddd7818
[  102.643198]  r4:eddd785c r3:eddd7b24
[  102.646834] [<c0669054>] (usb_add_gadget_udc) from [<bf003428>] (dummy_udc_probe+0x170/0x1c4 [dummy_hcd])
[  102.656458] [<bf0032b8>] (dummy_udc_probe [dummy_hcd]) from [<c053d114>] (platform_drv_probe+0x54/0xb8)
[  102.665881]  r10:00000008 r9:c1778960 r8:bf004128 r7:fffffdfb r6:bf004128 r5:eeaf8c10
[  102.673727]  r4:eeaf8c10
[  102.676293] [<c053d0c0>] (platform_drv_probe) from [<c053b160>] (driver_probe_device+0x264/0x474)
[  102.685186]  r7:00000000 r6:00000000 r5:c1778960 r4:eeaf8c10
[  102.690876] [<c053aefc>] (driver_probe_device) from [<c05397c4>] (bind_store+0xb8/0x14c)
[  102.698994]  r10:eeb3bb4c r9:ede34000 r8:0000000c r7:eeaf8c44 r6:bf004128 r5:c0f3b668
[  102.706840]  r4:eeaf8c10
[  102.709402] [<c053970c>] (bind_store) from [<c0538ca8>] (drv_attr_store+0x28/0x34)
[  102.716998]  r9:ede34000 r8:00000000 r7:ee3863c0 r6:ee3863c0 r5:c0538c80 r4:c053970c
[  102.724776] [<c0538c80>] (drv_attr_store) from [<c029c930>] (sysfs_kf_write+0x50/0x54)
[  102.732711]  r5:c0538c80 r4:0000000c
[  102.736313] [<c029c8e0>] (sysfs_kf_write) from [<c029be84>] (kernfs_fop_write+0x100/0x214)
[  102.744599]  r7:ee3863c0 r6:eeb3bb40 r5:00000000 r4:00000000
[  102.750287] [<c029bd84>] (kernfs_fop_write) from [<c0222dd8>] (__vfs_write+0x34/0x120)
[  102.758231]  r10:00000000 r9:ede34000 r8:c0108bc4 r7:0000000c r6:ede35f80 r5:c029bd84
[  102.766077]  r4:ee223780
[  102.768638] [<c0222da4>] (__vfs_write) from [<c0224678>] (vfs_write+0xa8/0x170)
[  102.775974]  r9:ede34000 r8:c0108bc4 r7:ede35f80 r6:01861cb0 r5:ee223780 r4:0000000c
[  102.783743] [<c02245d0>] (vfs_write) from [<c0225498>] (SyS_write+0x4c/0xa8)
[  102.790818]  r9:ede34000 r8:c0108bc4 r7:0000000c r6:01861cb0 r5:ee223780 r4:ee223780
[  102.798595] [<c022544c>] (SyS_write) from [<c0108a20>] (ret_fast_syscall+0x0/0x1c)
[  102.806188]  r7:00000004 r6:b6e83d58 r5:01861cb0 r4:0000000c

Fixes: 90fccb529d24 ("usb: gadget: Gadget directory cleanup - group UDC drivers")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Tested-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/udc/dummy_hcd.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -1033,6 +1033,8 @@ static int dummy_udc_probe(struct platfo
 	int		rc;
 
 	dum = *((void **)dev_get_platdata(&pdev->dev));
+	/* Clear usb_gadget region for new registration to udc-core */
+	memzero_explicit(&dum->gadget, sizeof(struct usb_gadget));
 	dum->gadget.name = gadget_name;
 	dum->gadget.ops = &dummy_ops;
 	dum->gadget.max_speed = USB_SPEED_SUPER;

[PATCH 4.4 19/35] usb: dwc3: gadget: make Set Endpoint Configuration macros safe

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felipe Balbi <felipe.balbi@linux.intel.com>

commit 7369090a9fb57c3fc705ce355d2e4523a5a24716 upstream.

Some gadget drivers are bad, bad boys. We notice
that ADB was passing bad Burst Size which caused top
bits of param0 to be overwritten which confused DWC3
when running this command.

In order to avoid future issues, we're going to make
sure values passed by macros are always safe for the
controller. Note that ADB still needs a fix to *not*
pass bad values.

Reported-by: Mohamed Abbas <mohamed.abbas@intel.com>
Sugested-by: Adam Andruszak <adam.andruszak@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/dwc3/gadget.h |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -28,23 +28,23 @@ struct dwc3;
 #define gadget_to_dwc(g)	(container_of(g, struct dwc3, gadget))
 
 /* DEPCFG parameter 1 */
-#define DWC3_DEPCFG_INT_NUM(n)		((n) << 0)
+#define DWC3_DEPCFG_INT_NUM(n)		(((n) & 0x1f) << 0)
 #define DWC3_DEPCFG_XFER_COMPLETE_EN	(1 << 8)
 #define DWC3_DEPCFG_XFER_IN_PROGRESS_EN	(1 << 9)
 #define DWC3_DEPCFG_XFER_NOT_READY_EN	(1 << 10)
 #define DWC3_DEPCFG_FIFO_ERROR_EN	(1 << 11)
 #define DWC3_DEPCFG_STREAM_EVENT_EN	(1 << 13)
-#define DWC3_DEPCFG_BINTERVAL_M1(n)	((n) << 16)
+#define DWC3_DEPCFG_BINTERVAL_M1(n)	(((n) & 0xff) << 16)
 #define DWC3_DEPCFG_STREAM_CAPABLE	(1 << 24)
-#define DWC3_DEPCFG_EP_NUMBER(n)	((n) << 25)
+#define DWC3_DEPCFG_EP_NUMBER(n)	(((n) & 0x1f) << 25)
 #define DWC3_DEPCFG_BULK_BASED		(1 << 30)
 #define DWC3_DEPCFG_FIFO_BASED		(1 << 31)
 
 /* DEPCFG parameter 0 */
-#define DWC3_DEPCFG_EP_TYPE(n)		((n) << 1)
-#define DWC3_DEPCFG_MAX_PACKET_SIZE(n)	((n) << 3)
-#define DWC3_DEPCFG_FIFO_NUMBER(n)	((n) << 17)
-#define DWC3_DEPCFG_BURST_SIZE(n)	((n) << 22)
+#define DWC3_DEPCFG_EP_TYPE(n)		(((n) & 0x3) << 1)
+#define DWC3_DEPCFG_MAX_PACKET_SIZE(n)	(((n) & 0x7ff) << 3)
+#define DWC3_DEPCFG_FIFO_NUMBER(n)	(((n) & 0x1f) << 17)
+#define DWC3_DEPCFG_BURST_SIZE(n)	(((n) & 0xf) << 22)
 #define DWC3_DEPCFG_DATA_SEQ_NUM(n)	((n) << 26)
 /* This applies for core versions earlier than 1.94a */
 #define DWC3_DEPCFG_IGN_SEQ_NUM		(1 << 31)

[PATCH 4.4 20/35] usb: gadget: function: f_fs: pass companion descriptor along

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felipe Balbi <felipe.balbi@linux.intel.com>

commit 2bfa0719ac2a9b2f3c91345873d3cdebd0296ba9 upstream.

If we're dealing with SuperSpeed endpoints, we need
to make sure to pass along the companion descriptor
and initialize fields needed by the Gadget
API. Eventually, f_fs.c should be converted to use
config_ep_by_speed() like all other functions,
though.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/function/f_fs.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -1643,11 +1643,14 @@ static int ffs_func_eps_enable(struct ff
 	spin_lock_irqsave(&func->ffs->eps_lock, flags);
 	do {
 		struct usb_endpoint_descriptor *ds;
+		struct usb_ss_ep_comp_descriptor *comp_desc = NULL;
+		int needs_comp_desc = false;
 		int desc_idx;
 
-		if (ffs->gadget->speed == USB_SPEED_SUPER)
+		if (ffs->gadget->speed == USB_SPEED_SUPER) {
 			desc_idx = 2;
-		else if (ffs->gadget->speed == USB_SPEED_HIGH)
+			needs_comp_desc = true;
+		} else if (ffs->gadget->speed == USB_SPEED_HIGH)
 			desc_idx = 1;
 		else
 			desc_idx = 0;
@@ -1664,6 +1667,14 @@ static int ffs_func_eps_enable(struct ff
 
 		ep->ep->driver_data = ep;
 		ep->ep->desc = ds;
+
+		comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds +
+				USB_DT_ENDPOINT_SIZE);
+		ep->ep->maxburst = comp_desc->bMaxBurst + 1;
+
+		if (needs_comp_desc)
+			ep->ep->comp_desc = comp_desc;
+
 		ret = usb_ep_enable(ep->ep);
 		if (likely(!ret)) {
 			epfile->ep = ep;

[PATCH 4.4 21/35] usb: host: xhci-dbg: HCIVERSION should be a binary number

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Chen <peter.chen@nxp.com>

commit f95e60a7dbecd2de816bb3ad517b3d4fbc20b507 upstream.

According to xHCI spec, HCIVERSION containing a BCD encoding
of the xHCI specification revision number, 0100h corresponds
to xHCI version 1.0. Change "100" as "0x100".

Cc: Lu Baolu <baolu.lu@linux.intel.com>
Fixes: 04abb6de2825 ("xhci: Read and parse new xhci 1.1 capability register")
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-dbg.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -111,7 +111,7 @@ static void xhci_print_cap_regs(struct x
 	xhci_dbg(xhci, "RTSOFF 0x%x:\n", temp & RTSOFF_MASK);
 
 	/* xhci 1.1 controllers have the HCCPARAMS2 register */
-	if (hci_version > 100) {
+	if (hci_version > 0x100) {
 		temp = readl(&xhci->cap_regs->hcc_params2);
 		xhci_dbg(xhci, "HCC PARAMS2 0x%x:\n", (unsigned int) temp);
 		xhci_dbg(xhci, "  HC %s Force save context capability",

[PATCH 4.4 22/35] usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllers

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <linux@roeck-us.net>

commit dcc7620cad5ad1326a78f4031a7bf4f0e5b42984 upstream.

Upstream commit 98d74f9ceaef ("xhci: fix 10 second timeout on removal of
PCI hotpluggable xhci controllers") fixes a problem with hot pluggable PCI
xhci controllers which can result in excessive timeouts, to the point where
the system reports a deadlock.

The same problem is seen with hot pluggable xhci controllers using the
xhci-plat driver, such as the driver used for Type-C ports on rk3399.
Similar to hot-pluggable PCI controllers, the driver for this chip
removes the xhci controller from the system when the Type-C cable is
disconnected.

The solution for PCI devices works just as well for non-PCI devices
and avoids the problem.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-plat.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -213,6 +213,8 @@ static int xhci_plat_remove(struct platf
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 	struct clk *clk = xhci->clk;
 
+	xhci->xhc_state |= XHCI_STATE_REMOVING;
+
 	usb_remove_hcd(xhci->shared_hcd);
 	usb_phy_shutdown(hcd->usb_phy);
 

[PATCH 4.4 23/35] USB: serial: safe_serial: fix information leak in completion handler

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 8c76d7cd520ebffc1ea9ea0850d87a224a50c7f2 upstream.

Add missing sanity check to the bulk-in completion handler to avoid an
integer underflow that could be triggered by a malicious device.

This avoids leaking up to 56 bytes from after the URB transfer buffer to
user space.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/safe_serial.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -205,6 +205,11 @@ static void safe_process_read_urb(struct
 	if (!safe)
 		goto out;
 
+	if (length < 2) {
+		dev_err(&port->dev, "malformed packet\n");
+		return;
+	}
+
 	fcs = fcs_compute10(data, length, CRC10_INITFCS);
 	if (fcs) {
 		dev_err(&port->dev, "%s - bad CRC %x\n", __func__, fcs);

[PATCH 4.4 24/35] USB: serial: omninet: fix reference leaks at open

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 30572418b445d85fcfe6c8fe84c947d2606767d8 upstream.

This driver needlessly took another reference to the tty on open, a
reference which was then never released on close. This lead to not just
a leak of the tty, but also a driver reference leak that prevented the
driver from being unloaded after a port had once been opened.

Fixes: 4a90f09b20f4 ("tty: usb-serial krefs")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/omninet.c |    6 ------
 1 file changed, 6 deletions(-)

--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -142,12 +142,6 @@ static int omninet_port_remove(struct us
 
 static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
-	struct usb_serial	*serial = port->serial;
-	struct usb_serial_port	*wport;
-
-	wport = serial->port[1];
-	tty_port_tty_set(&wport->port, tty);
-
 	return usb_serial_generic_open(tty, port);
 }
 

[PATCH 4.4 25/35] USB: iowarrior: fix NULL-deref at probe

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit b7321e81fc369abe353cf094d4f0dc2fe11ab95f upstream.

Make sure to check for the required interrupt-in endpoint to avoid
dereferencing a NULL-pointer should a malicious device lack such an
endpoint.

Note that a fairly recent change purported to fix this issue, but added
an insufficient test on the number of endpoints only, a test which can
now be removed.

Fixes: 4ec0ef3a8212 ("USB: iowarrior: fix oops with malicious USB descriptors")
Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/misc/iowarrior.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -787,12 +787,6 @@ static int iowarrior_probe(struct usb_in
 	iface_desc = interface->cur_altsetting;
 	dev->product_id = le16_to_cpu(udev->descriptor.idProduct);
 
-	if (iface_desc->desc.bNumEndpoints < 1) {
-		dev_err(&interface->dev, "Invalid number of endpoints\n");
-		retval = -EINVAL;
-		goto error;
-	}
-
 	/* set up the endpoint information */
 	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
 		endpoint = &iface_desc->endpoint[i].desc;
@@ -803,6 +797,13 @@ static int iowarrior_probe(struct usb_in
 			/* this one will match for the IOWarrior56 only */
 			dev->int_out_endpoint = endpoint;
 	}
+
+	if (!dev->int_in_endpoint) {
+		dev_err(&interface->dev, "no interrupt-in endpoint found\n");
+		retval = -ENODEV;
+		goto error;
+	}
+
 	/* we have to check the report_size often, so remember it in the endianness suitable for our machine */
 	dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint);
 	if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) &&

[PATCH 4.4 26/35] USB: iowarrior: fix NULL-deref in write

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit de46e56653de7b3b54baa625bd582635008b8d05 upstream.

Make sure to verify that we have the required interrupt-out endpoint for
IOWarrior56 devices to avoid dereferencing a NULL-pointer in write
should a malicious device lack such an endpoint.

Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/misc/iowarrior.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -804,6 +804,14 @@ static int iowarrior_probe(struct usb_in
 		goto error;
 	}
 
+	if (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56) {
+		if (!dev->int_out_endpoint) {
+			dev_err(&interface->dev, "no interrupt-out endpoint found\n");
+			retval = -ENODEV;
+			goto error;
+		}
+	}
+
 	/* we have to check the report_size often, so remember it in the endianness suitable for our machine */
 	dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint);
 	if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) &&

[PATCH 4.4 27/35] USB: serial: io_ti: fix NULL-deref in interrupt callback

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 0b1d250afb8eb9d65afb568bac9b9f9253a82b49 upstream.

Fix a NULL-pointer dereference in the interrupt callback should a
malicious device send data containing a bad port number by adding the
missing sanity check.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/io_ti.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1674,6 +1674,12 @@ static void edge_interrupt_callback(stru
 	function    = TIUMP_GET_FUNC_FROM_CODE(data[0]);
 	dev_dbg(dev, "%s - port_number %d, function %d, info 0x%x\n", __func__,
 		port_number, function, data[1]);
+
+	if (port_number >= edge_serial->serial->num_ports) {
+		dev_err(dev, "bad port number %d\n", port_number);
+		goto exit;
+	}
+
 	port = edge_serial->serial->port[port_number];
 	edge_port = usb_get_serial_port_data(port);
 	if (!edge_port) {

[PATCH 4.4 28/35] USB: serial: io_ti: fix information leak in completion handler

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 654b404f2a222f918af9b0cd18ad469d0c941a8e upstream.

Add missing sanity check to the bulk-in completion handler to avoid an
integer underflow that can be triggered by a malicious device.

This avoids leaking 128 kB of memory content from after the URB transfer
buffer to user space.

Fixes: 8c209e6782ca ("USB: make actual_length in struct urb field u32")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/io_ti.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1761,7 +1761,7 @@ static void edge_bulk_in_callback(struct
 
 	port_number = edge_port->port->port_number;
 
-	if (edge_port->lsr_event) {
+	if (urb->actual_length > 0 && edge_port->lsr_event) {
 		edge_port->lsr_event = 0;
 		dev_dbg(dev, "%s ===== Port %u LSR Status = %02x, Data = %02x ======\n",
 			__func__, port_number, edge_port->lsr_mask, *data);

[PATCH 4.4 30/35] mvsas: fix misleading indentation

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luis de Bethencourt <luisbg@osg.samsung.com>

commit 7789cd39274c51bf475411fe22a8ee7255082809 upstream.

Fix a smatch warning:
drivers/scsi/mvsas/mv_sas.c:740 mvs_task_prep() warn: curly braces intended?

The code is correct, the indention is misleading. When the device is not
ready we want to return SAS_PHY_DOWN. But current indentation makes it
look like we only do so in the else branch of if (mvi_dev).

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/mvsas/mv_sas.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/scsi/mvsas/mv_sas.c
+++ b/drivers/scsi/mvsas/mv_sas.c
@@ -737,8 +737,8 @@ static int mvs_task_prep(struct sas_task
 			mv_dprintk("device %016llx not ready.\n",
 				SAS_ADDR(dev->sas_addr));
 
-			rc = SAS_PHY_DOWN;
-			return rc;
+		rc = SAS_PHY_DOWN;
+		return rc;
 	}
 	tei.port = dev->port->lldd_port;
 	if (tei.port && !tei.port->port_attached && !tmf) {

[PATCH 4.4 31/35] KVM: s390: Fix guest migration for huge guests resulting in panic

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Janosch Frank <frankja@linux.vnet.ibm.com>

commit 2e4d88009f57057df7672fa69a32b5224af54d37 upstream.

While we can technically not run huge page guests right now, we can
setup a guest with huge pages. Trying to migrate it will trigger a
VM_BUG_ON and, if the kernel is not configured to panic on a BUG, it
will happily try to work on non-existing page table entries.

With this patch, we always return "dirty" if we encounter a large page
when migrating. This at least fixes the immediate problem until we
have proper handling for both kind of pages.

Fixes: 15f36eb ("KVM: s390: Add proper dirty bitmap support to S390 kvm.")
Cc: <stable@vger.kernel.org> # 3.16+

Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/mm/pgtable.c |   19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -1237,11 +1237,28 @@ EXPORT_SYMBOL_GPL(s390_reset_cmma);
  */
 bool gmap_test_and_clear_dirty(unsigned long address, struct gmap *gmap)
 {
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
 	pte_t *pte;
 	spinlock_t *ptl;
 	bool dirty = false;
 
-	pte = get_locked_pte(gmap->mm, address, &ptl);
+	pgd = pgd_offset(gmap->mm, address);
+	pud = pud_alloc(gmap->mm, pgd, address);
+	if (!pud)
+		return false;
+	pmd = pmd_alloc(gmap->mm, pud, address);
+	if (!pmd)
+		return false;
+	/* We can't run guests backed by huge pages, but userspace can
+	 * still set them up and then try to migrate them without any
+	 * migration support.
+	 */
+	if (pmd_large(*pmd))
+		return true;
+
+	pte = pte_alloc_map_lock(gmap->mm, pmd, address, &ptl);
 	if (unlikely(!pte))
 		return false;
 

[PATCH 4.4 32/35] s390/kdump: Use "LINUX" ELF note name instead of "CORE"

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Holzheu <holzheu@linux.vnet.ibm.com>

commit a4a81d8eebdc1d209d034f62a082a5131e4242b5 upstream.

In binutils/libbfd (bfd/elf.c) it is enforced that all s390 specific ELF
notes like e.g. NT_S390_PREFIX or NT_S390_CTRS have "LINUX" specified
as note name. Otherwise the notes are ignored.

For /proc/vmcore we currently use "CORE" for these notes.

Up to now this has not been a real problem because the dump analysis tool
"crash" does not check the note name. But it will break all programs that
use libbfd for processing ELF notes.

So fix this and use "LINUX" for all s390 specific notes to comply with
libbfd.

Reported-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/kernel/crash_dump.c |   18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

--- a/arch/s390/kernel/crash_dump.c
+++ b/arch/s390/kernel/crash_dump.c
@@ -23,6 +23,8 @@
 #define PTR_SUB(x, y) (((char *) (x)) - ((unsigned long) (y)))
 #define PTR_DIFF(x, y) ((unsigned long)(((char *) (x)) - ((unsigned long) (y))))
 
+#define LINUX_NOTE_NAME "LINUX"
+
 static struct memblock_region oldmem_region;
 
 static struct memblock_type oldmem_type = {
@@ -312,7 +314,7 @@ static void *nt_fpregset(void *ptr, stru
 static void *nt_s390_timer(void *ptr, struct save_area *sa)
 {
 	return nt_init(ptr, NT_S390_TIMER, &sa->timer, sizeof(sa->timer),
-			 KEXEC_CORE_NOTE_NAME);
+			 LINUX_NOTE_NAME);
 }
 
 /*
@@ -321,7 +323,7 @@ static void *nt_s390_timer(void *ptr, st
 static void *nt_s390_tod_cmp(void *ptr, struct save_area *sa)
 {
 	return nt_init(ptr, NT_S390_TODCMP, &sa->clk_cmp,
-		       sizeof(sa->clk_cmp), KEXEC_CORE_NOTE_NAME);
+		       sizeof(sa->clk_cmp), LINUX_NOTE_NAME);
 }
 
 /*
@@ -330,7 +332,7 @@ static void *nt_s390_tod_cmp(void *ptr,
 static void *nt_s390_tod_preg(void *ptr, struct save_area *sa)
 {
 	return nt_init(ptr, NT_S390_TODPREG, &sa->tod_reg,
-		       sizeof(sa->tod_reg), KEXEC_CORE_NOTE_NAME);
+		       sizeof(sa->tod_reg), LINUX_NOTE_NAME);
 }
 
 /*
@@ -339,7 +341,7 @@ static void *nt_s390_tod_preg(void *ptr,
 static void *nt_s390_ctrs(void *ptr, struct save_area *sa)
 {
 	return nt_init(ptr, NT_S390_CTRS, &sa->ctrl_regs,
-		       sizeof(sa->ctrl_regs), KEXEC_CORE_NOTE_NAME);
+		       sizeof(sa->ctrl_regs), LINUX_NOTE_NAME);
 }
 
 /*
@@ -348,7 +350,7 @@ static void *nt_s390_ctrs(void *ptr, str
 static void *nt_s390_prefix(void *ptr, struct save_area *sa)
 {
 	return nt_init(ptr, NT_S390_PREFIX, &sa->pref_reg,
-			 sizeof(sa->pref_reg), KEXEC_CORE_NOTE_NAME);
+			 sizeof(sa->pref_reg), LINUX_NOTE_NAME);
 }
 
 /*
@@ -357,7 +359,7 @@ static void *nt_s390_prefix(void *ptr, s
 static void *nt_s390_vx_high(void *ptr, __vector128 *vx_regs)
 {
 	return nt_init(ptr, NT_S390_VXRS_HIGH, &vx_regs[16],
-		       16 * sizeof(__vector128), KEXEC_CORE_NOTE_NAME);
+		       16 * sizeof(__vector128), LINUX_NOTE_NAME);
 }
 
 /*
@@ -370,12 +372,12 @@ static void *nt_s390_vx_low(void *ptr, _
 	int i;
 
 	note = (Elf64_Nhdr *)ptr;
-	note->n_namesz = strlen(KEXEC_CORE_NOTE_NAME) + 1;
+	note->n_namesz = strlen(LINUX_NOTE_NAME) + 1;
 	note->n_descsz = 16 * 8;
 	note->n_type = NT_S390_VXRS_LOW;
 	len = sizeof(Elf64_Nhdr);
 
-	memcpy(ptr + len, KEXEC_CORE_NOTE_NAME, note->n_namesz);
+	memcpy(ptr + len, LINUX_NOTE_NAME, note->n_namesz);
 	len = roundup(len + note->n_namesz, 4);
 
 	ptr += len;

[PATCH 4.4 33/35] nfit, libnvdimm: fix interleave set cookie calculation

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Williams <dan.j.williams@intel.com>

commit 86ef58a4e35e8fa66afb5898cf6dec6a3bb29f67 upstream.

The interleave-set cookie is a sum that sanity checks the composition of
an interleave set has not changed from when the namespace was initially
created.  The checksum is calculated by sorting the DIMMs by their
location in the interleave-set. The comparison for the sort must be
64-bit wide, not byte-by-byte as performed by memcmp() in the broken
case.

Fix the implementation to accept correct cookie values in addition to
the Linux "memcmp" order cookies, but only allow correct cookies to be
generated going forward. It does mean that namespaces created by
third-party-tooling, or created by newer kernels with this fix, will not
validate on older kernels. However, there are a couple mitigating
conditions:

    1/ platforms with namespace-label capable NVDIMMs are not widely
       available.

    2/ interleave-sets with a single-dimm are by definition not affected
       (nothing to sort). This covers the QEMU-KVM NVDIMM emulation case.

The cookie stored in the namespace label will be fixed by any write the
namespace label, the most straightforward way to achieve this is to
write to the "alt_name" attribute of a namespace in sysfs.

Fixes: eaf961536e16 ("libnvdimm, nfit: add interleave-set state-tracking infrastructure")
Reported-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com>
Tested-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/nfit.c             |   16 +++++++++++++++-
 drivers/nvdimm/namespace_devs.c |   28 +++++++++++++++++++++-------
 drivers/nvdimm/nd.h             |    1 +
 drivers/nvdimm/region_devs.c    |    9 +++++++++
 include/linux/libnvdimm.h       |    2 ++
 5 files changed, 48 insertions(+), 8 deletions(-)

--- a/drivers/acpi/nfit.c
+++ b/drivers/acpi/nfit.c
@@ -965,7 +965,7 @@ static size_t sizeof_nfit_set_info(int n
 		+ num_mappings * sizeof(struct nfit_set_info_map);
 }
 
-static int cmp_map(const void *m0, const void *m1)
+static int cmp_map_compat(const void *m0, const void *m1)
 {
 	const struct nfit_set_info_map *map0 = m0;
 	const struct nfit_set_info_map *map1 = m1;
@@ -974,6 +974,14 @@ static int cmp_map(const void *m0, const
 			sizeof(u64));
 }
 
+static int cmp_map(const void *m0, const void *m1)
+{
+	const struct nfit_set_info_map *map0 = m0;
+	const struct nfit_set_info_map *map1 = m1;
+
+	return map0->region_offset - map1->region_offset;
+}
+
 /* Retrieve the nth entry referencing this spa */
 static struct acpi_nfit_memory_map *memdev_from_spa(
 		struct acpi_nfit_desc *acpi_desc, u16 range_index, int n)
@@ -1029,6 +1037,12 @@ static int acpi_nfit_init_interleave_set
 	sort(&info->mapping[0], nr, sizeof(struct nfit_set_info_map),
 			cmp_map, NULL);
 	nd_set->cookie = nd_fletcher64(info, sizeof_nfit_set_info(nr), 0);
+
+	/* support namespaces created with the wrong sort order */
+	sort(&info->mapping[0], nr, sizeof(struct nfit_set_info_map),
+			cmp_map_compat, NULL);
+	nd_set->altcookie = nd_fletcher64(info, sizeof_nfit_set_info(nr), 0);
+
 	ndr_desc->nd_set = nd_set;
 	devm_kfree(dev, info);
 
--- a/drivers/nvdimm/namespace_devs.c
+++ b/drivers/nvdimm/namespace_devs.c
@@ -1534,6 +1534,7 @@ static int select_pmem_id(struct nd_regi
 static int find_pmem_label_set(struct nd_region *nd_region,
 		struct nd_namespace_pmem *nspm)
 {
+	u64 altcookie = nd_region_interleave_set_altcookie(nd_region);
 	u64 cookie = nd_region_interleave_set_cookie(nd_region);
 	struct nd_namespace_label *nd_label;
 	u8 select_id[NSLABEL_UUID_LEN];
@@ -1542,8 +1543,10 @@ static int find_pmem_label_set(struct nd
 	int rc = -ENODEV, l;
 	u16 i;
 
-	if (cookie == 0)
+	if (cookie == 0) {
+		dev_dbg(&nd_region->dev, "invalid interleave-set-cookie\n");
 		return -ENXIO;
+	}
 
 	/*
 	 * Find a complete set of labels by uuid.  By definition we can start
@@ -1552,13 +1555,24 @@ static int find_pmem_label_set(struct nd
 	for_each_label(l, nd_label, nd_region->mapping[0].labels) {
 		u64 isetcookie = __le64_to_cpu(nd_label->isetcookie);
 
-		if (isetcookie != cookie)
-			continue;
+		if (isetcookie != cookie) {
+			dev_dbg(&nd_region->dev, "invalid cookie in label: %pUb\n",
+					nd_label->uuid);
+			if (isetcookie != altcookie)
+				continue;
+
+			dev_dbg(&nd_region->dev, "valid altcookie in label: %pUb\n",
+					nd_label->uuid);
+		}
+
+		for (i = 0; nd_region->ndr_mappings; i++) {
+			if (has_uuid_at_pos(nd_region, nd_label->uuid, cookie, i))
+				continue;
+			if (has_uuid_at_pos(nd_region, nd_label->uuid, altcookie, i))
+				continue;
+			break;
+		}
 
-		for (i = 0; nd_region->ndr_mappings; i++)
-			if (!has_uuid_at_pos(nd_region, nd_label->uuid,
-						cookie, i))
-				break;
 		if (i < nd_region->ndr_mappings) {
 			/*
 			 * Give up if we don't find an instance of a
--- a/drivers/nvdimm/nd.h
+++ b/drivers/nvdimm/nd.h
@@ -245,6 +245,7 @@ struct nd_region *to_nd_region(struct de
 int nd_region_to_nstype(struct nd_region *nd_region);
 int nd_region_register_namespaces(struct nd_region *nd_region, int *err);
 u64 nd_region_interleave_set_cookie(struct nd_region *nd_region);
+u64 nd_region_interleave_set_altcookie(struct nd_region *nd_region);
 void nvdimm_bus_lock(struct device *dev);
 void nvdimm_bus_unlock(struct device *dev);
 bool is_nvdimm_bus_locked(struct device *dev);
--- a/drivers/nvdimm/region_devs.c
+++ b/drivers/nvdimm/region_devs.c
@@ -379,6 +379,15 @@ u64 nd_region_interleave_set_cookie(stru
 	return 0;
 }
 
+u64 nd_region_interleave_set_altcookie(struct nd_region *nd_region)
+{
+	struct nd_interleave_set *nd_set = nd_region->nd_set;
+
+	if (nd_set)
+		return nd_set->altcookie;
+	return 0;
+}
+
 /*
  * Upon successful probe/remove, take/release a reference on the
  * associated interleave set (if present), and plant new btt + namespace
--- a/include/linux/libnvdimm.h
+++ b/include/linux/libnvdimm.h
@@ -83,6 +83,8 @@ struct nd_cmd_desc {
 
 struct nd_interleave_set {
 	u64 cookie;
+	/* compatibility with initial buggy Linux implementation */
+	u64 altcookie;
 };
 
 struct nd_region_desc {

Re: [PATCH 4.4 33/35] nfit, libnvdimm: fix interleave set cookie calculation

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 1455 bytes --]

On Thu, 2017-03-16 at 23:29 +0900, Greg Kroah-Hartman wrote:
> 4.4-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Dan Williams <dan.j.williams@intel.com>
> 
> commit 86ef58a4e35e8fa66afb5898cf6dec6a3bb29f67 upstream.
> 
> The interleave-set cookie is a sum that sanity checks the composition of
> an interleave set has not changed from when the namespace was initially
> created.  The checksum is calculated by sorting the DIMMs by their
> location in the interleave-set. The comparison for the sort must be
> 64-bit wide, not byte-by-byte as performed by memcmp() in the broken
> case.
[...]
> --- a/drivers/acpi/nfit.c
> +++ b/drivers/acpi/nfit.c
[...]
> +static int cmp_map(const void *m0, const void *m1)
> +{
> +	const struct nfit_set_info_map *map0 = m0;
> +	const struct nfit_set_info_map *map1 = m1;
> +
> +	return map0->region_offset - map1->region_offset;
> +}
[...]

This is returning an int, thus it's effectively doing a 32-bit
comparison and not the 64-bit comparison you say is needed.

I think this function needs to do something like:

	return (map0->region_offset < map1->region_offset) ? -1 :
		(map0->region_offset == map1->region_offset) ? 0 : 1;

Ben.

-- 
Ben Hutchings
Power corrupts.  Absolute power is kind of neat.
                           - John Lehman, Secretary of the US Navy
1981-1987

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 4.4 33/35] nfit, libnvdimm: fix interleave set cookie calculation

[Dan Williams]

On Sun, Mar 19, 2017 at 9:38 AM, Ben Hutchings <ben@decadent.org.uk> wrote:
> On Thu, 2017-03-16 at 23:29 +0900, Greg Kroah-Hartman wrote:
>> 4.4-stable review patch.  If anyone has any objections, please let me know.
>>
>> ------------------
>>
>> From: Dan Williams <dan.j.williams@intel.com>
>>
>> commit 86ef58a4e35e8fa66afb5898cf6dec6a3bb29f67 upstream.
>>
>> The interleave-set cookie is a sum that sanity checks the composition of
>> an interleave set has not changed from when the namespace was initially
>> created.  The checksum is calculated by sorting the DIMMs by their
>> location in the interleave-set. The comparison for the sort must be
>> 64-bit wide, not byte-by-byte as performed by memcmp() in the broken
>> case.
> [...]
>> --- a/drivers/acpi/nfit.c
>> +++ b/drivers/acpi/nfit.c
> [...]
>> +static int cmp_map(const void *m0, const void *m1)
>> +{
>> +     const struct nfit_set_info_map *map0 = m0;
>> +     const struct nfit_set_info_map *map1 = m1;
>> +
>> +     return map0->region_offset - map1->region_offset;
>> +}
> [...]
>
> This is returning an int, thus it's effectively doing a 32-bit
> comparison and not the 64-bit comparison you say is needed.
>
> I think this function needs to do something like:
>
>         return (map0->region_offset < map1->region_offset) ? -1 :
>                 (map0->region_offset == map1->region_offset) ? 0 : 1;

Yes, you're right. We could end up with unexpected sign changes. Good catch.

[PATCH 4.4 34/35] dm: flush queued bios when process blocks to avoid deadlock

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <mpatocka@redhat.com>

commit d67a5f4b5947aba4bfe9a80a2b86079c215ca755 upstream.

Commit df2cb6daa4 ("block: Avoid deadlocks with bio allocation by
stacking drivers") created a workqueue for every bio set and code
in bio_alloc_bioset() that tries to resolve some low-memory deadlocks
by redirecting bios queued on current->bio_list to the workqueue if the
system is low on memory.  However other deadlocks (see below **) may
happen, without any low memory condition, because generic_make_request
is queuing bios to current->bio_list (rather than submitting them).

** the related dm-snapshot deadlock is detailed here:
https://www.redhat.com/archives/dm-devel/2016-July/msg00065.html

Fix this deadlock by redirecting any bios on current->bio_list to the
bio_set's rescue workqueue on every schedule() call.  Consequently,
when the process blocks on a mutex, the bios queued on
current->bio_list are dispatched to independent workqueus and they can
complete without waiting for the mutex to be available.

The structure blk_plug contains an entry cb_list and this list can contain
arbitrary callback functions that are called when the process blocks.
To implement this fix DM (ab)uses the onstack plug's cb_list interface
to get its flush_current_bio_list() called at schedule() time.

This fixes the snapshot deadlock - if the map method blocks,
flush_current_bio_list() will be called and it redirects bios waiting
on current->bio_list to appropriate workqueues.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1267650
Depends-on: df2cb6daa4 ("block: Avoid deadlocks with bio allocation by stacking drivers")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm.c |   55 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1467,11 +1467,62 @@ void dm_accept_partial_bio(struct bio *b
 }
 EXPORT_SYMBOL_GPL(dm_accept_partial_bio);
 
+/*
+ * Flush current->bio_list when the target map method blocks.
+ * This fixes deadlocks in snapshot and possibly in other targets.
+ */
+struct dm_offload {
+	struct blk_plug plug;
+	struct blk_plug_cb cb;
+};
+
+static void flush_current_bio_list(struct blk_plug_cb *cb, bool from_schedule)
+{
+	struct dm_offload *o = container_of(cb, struct dm_offload, cb);
+	struct bio_list list;
+	struct bio *bio;
+
+	INIT_LIST_HEAD(&o->cb.list);
+
+	if (unlikely(!current->bio_list))
+		return;
+
+	list = *current->bio_list;
+	bio_list_init(current->bio_list);
+
+	while ((bio = bio_list_pop(&list))) {
+		struct bio_set *bs = bio->bi_pool;
+		if (unlikely(!bs) || bs == fs_bio_set) {
+			bio_list_add(current->bio_list, bio);
+			continue;
+		}
+
+		spin_lock(&bs->rescue_lock);
+		bio_list_add(&bs->rescue_list, bio);
+		queue_work(bs->rescue_workqueue, &bs->rescue_work);
+		spin_unlock(&bs->rescue_lock);
+	}
+}
+
+static void dm_offload_start(struct dm_offload *o)
+{
+	blk_start_plug(&o->plug);
+	o->cb.callback = flush_current_bio_list;
+	list_add(&o->cb.list, &current->plug->cb_list);
+}
+
+static void dm_offload_end(struct dm_offload *o)
+{
+	list_del(&o->cb.list);
+	blk_finish_plug(&o->plug);
+}
+
 static void __map_bio(struct dm_target_io *tio)
 {
 	int r;
 	sector_t sector;
 	struct mapped_device *md;
+	struct dm_offload o;
 	struct bio *clone = &tio->clone;
 	struct dm_target *ti = tio->ti;
 
@@ -1484,7 +1535,11 @@ static void __map_bio(struct dm_target_i
 	 */
 	atomic_inc(&tio->io->io_count);
 	sector = clone->bi_iter.bi_sector;
+
+	dm_offload_start(&o);
 	r = ti->type->map(ti, clone);
+	dm_offload_end(&o);
+
 	if (r == DM_MAPIO_REMAPPED) {
 		/* the bio has been remapped so dispatch it */
 

[PATCH 4.4 35/35] ext4: dont BUG when truncating encrypted inodes on the orphan list

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit 0d06863f903ac5f4f6efb0273079d27de3e53a28 upstream.

Fix a BUG when the kernel tries to mount a file system constructed as
follows:

echo foo > foo.txt
mke2fs -Fq -t ext4 -O encrypt foo.img 100
debugfs -w foo.img << EOF
write foo.txt a
set_inode_field a i_flags 0x80800
set_super_value s_last_orphan 12
quit
EOF

root@kvm-xfstests:~# mount -o loop foo.img /mnt
[  160.238770] ------------[ cut here ]------------
[  160.240106] kernel BUG at /usr/projects/linux/ext4/fs/ext4/inode.c:3874!
[  160.240106] invalid opcode: 0000 [#1] SMP
[  160.240106] Modules linked in:
[  160.240106] CPU: 0 PID: 2547 Comm: mount Tainted: G        W       4.10.0-rc3-00034-gcdd33b941b67 #227
[  160.240106] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1 04/01/2014
[  160.240106] task: f4518000 task.stack: f47b6000
[  160.240106] EIP: ext4_block_zero_page_range+0x1a7/0x2b4
[  160.240106] EFLAGS: 00010246 CPU: 0
[  160.240106] EAX: 00000001 EBX: f7be4b50 ECX: f47b7dc0 EDX: 00000007
[  160.240106] ESI: f43b05a8 EDI: f43babec EBP: f47b7dd0 ESP: f47b7dac
[  160.240106]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[  160.240106] CR0: 80050033 CR2: bfd85b08 CR3: 34a00680 CR4: 000006f0
[  160.240106] Call Trace:
[  160.240106]  ext4_truncate+0x1e9/0x3e5
[  160.240106]  ext4_fill_super+0x286f/0x2b1e
[  160.240106]  ? set_blocksize+0x2e/0x7e
[  160.240106]  mount_bdev+0x114/0x15f
[  160.240106]  ext4_mount+0x15/0x17
[  160.240106]  ? ext4_calculate_overhead+0x39d/0x39d
[  160.240106]  mount_fs+0x58/0x115
[  160.240106]  vfs_kern_mount+0x4b/0xae
[  160.240106]  do_mount+0x671/0x8c3
[  160.240106]  ? _copy_from_user+0x70/0x83
[  160.240106]  ? strndup_user+0x31/0x46
[  160.240106]  SyS_mount+0x57/0x7b
[  160.240106]  do_int80_syscall_32+0x4f/0x61
[  160.240106]  entry_INT80_32+0x2f/0x2f
[  160.240106] EIP: 0xb76b919e
[  160.240106] EFLAGS: 00000246 CPU: 0
[  160.240106] EAX: ffffffda EBX: 08053838 ECX: 08052188 EDX: 080537e8
[  160.240106] ESI: c0ed0000 EDI: 00000000 EBP: 080537e8 ESP: bfa13660
[  160.240106]  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b
[  160.240106] Code: 59 8b 00 a8 01 0f 84 09 01 00 00 8b 07 66 25 00 f0 66 3d 00 80 75 61 89 f8 e8 3e e2 ff ff 84 c0 74 56 83 bf 48 02 00 00 00 75 02 <0f> 0b 81 7d e8 00 10 00 00 74 02 0f 0b 8b 43 04 8b 53 08 31 c9
[  160.240106] EIP: ext4_block_zero_page_range+0x1a7/0x2b4 SS:ESP: 0068:f47b7dac
[  160.317241] ---[ end trace d6a773a375c810a5 ]---

The problem is that when the kernel tries to truncate an inode in
ext4_truncate(), it tries to clear any on-disk data beyond i_size.
Without the encryption key, it can't do that, and so it triggers a
BUG.

E2fsck does *not* provide this service, and in practice most file
systems have their orphan list processed by e2fsck, so to avoid
crashing, this patch skips this step if we don't have access to the
encryption key (which is the case when processing the orphan list; in
all other cases, we will have the encryption key, or the kernel
wouldn't have allowed the file to be opened).

An open question is whether the fact that e2fsck isn't clearing the
bytes beyond i_size causing problems --- and if we've lived with it
not doing it for so long, can we drop this from the kernel replay of
the orphan list in all cases (not just when we don't have the key for
encrypted inodes).

Addresses-Google-Bug: #35209576

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/inode.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3573,6 +3573,10 @@ static int ext4_block_truncate_page(hand
 	unsigned blocksize;
 	struct inode *inode = mapping->host;
 
+	/* If we are processing an encrypted inode during orphan list handling */
+	if (ext4_encrypted_inode(inode) && !ext4_has_encryption_key(inode))
+		return 0;
+
 	blocksize = inode->i_sb->s_blocksize;
 	length = blocksize - (offset & (blocksize - 1));
 

Re: [PATCH 4.4 00/35] 4.4.55-stable review

[Shuah Khan]

On 03/16/2017 08:29 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.55 release.
> There are 35 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat Mar 18 14:28:52 UTC 2017.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.55-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 4.4 00/35] 4.4.55-stable review

[Guenter Roeck]

On Thu, Mar 16, 2017 at 11:29:19PM +0900, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.55 release.
> There are 35 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat Mar 18 14:28:52 UTC 2017.
> Anything received after that time might be too late.
> 
Build results:
	total: 149 pass: 149 fail: 0
Qemu test results:
	total: 115 pass: 115 fail: 0

Details are available at http://kerneltests.org/builders.

Guenter