All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	"Benoît Cousson"
	<bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	"Marcel Partap" <mpartap-hi6Y0CQ0nG0@public.gmane.org>,
	"Michael Scott"
	<michael.scott-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Subject: Re: [PATCH 4/6] ARM: dts: omap4-droid4: Add tmp105 sensor for droid 4
Date: Sun, 19 Mar 2017 02:26:22 +0100	[thread overview]
Message-ID: <20170319012622.lg7qhqgdbkeqr7vf@earth> (raw)
In-Reply-To: <20170305054359.8293-5-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>

[-- Attachment #1: Type: text/plain, Size: 1962 bytes --]

Hi,

On Sat, Mar 04, 2017 at 09:43:57PM -0800, Tony Lindgren wrote:
> Add tmp105 sensor for droid 4. This can be used with modprobe
> lm75.ko and running sensors from lm-sensors package. Note that
> the lm75.c driver does not yet support alert interrupt but
> droid 4 seems to be wired for it.

lazy testing: cat /sys/class/hwmon/hwmon0/temp1_input
31437

> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: Marcel Partap <mpartap-hi6Y0CQ0nG0@public.gmane.org>
> Cc: Michael Scott <michael.scott-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Cc: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>

Tested-By: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

-- Sebastian

> ---
>  arch/arm/boot/dts/omap4-droid4-xt894.dts | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
> --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
> +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
> @@ -81,6 +81,20 @@
>  	status = "disabled";
>  };
>  
> +&i2c1 {
> +	tmp105@48 {
> +		compatible = "ti,tmp105";
> +		reg = <0x48>;
> +		pinctrl-0 = <&tmp105_irq>;
> +		pinctrl-names = "default";
> +		/* kpd_row0.gpio_178 */
> +		interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING
> +				       &omap4_pmx_core 0x14e>;
> +		interrupt-names = "irq", "wakeup";
> +		wakeup-source;
> +	};
> +};
> +
>  &keypad {
>  	keypad,num-rows = <8>;
>  	keypad,num-columns = <8>;
> @@ -242,6 +256,13 @@
>  		>;
>  	};
>  
> +	/* kpd_row0.gpio_178 */
> +	tmp105_irq: pinmux_tmp105_irq {
> +		pinctrl-single,pins = <
> +		OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
> +		>;
> +	};
> +
>  	usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins {
>  		/* gpio_60 */
>  		pinctrl-single,pins = <
> -- 
> 2.11.1

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

  parent reply	other threads:[~2017-03-19  1:26 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-05  5:43 [PATCH 0/6] Device tree changes to add more droid 4 devices Tony Lindgren
     [not found] ` <20170305054359.8293-1-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-03-05  5:43   ` [PATCH 1/6] ARM: dts: omap4-droid4: Add touchscreen Tony Lindgren
2017-03-05  5:43   ` [PATCH 2/6] ARM: dts: omap4-droid4: Add LCD backlight Tony Lindgren
     [not found]     ` <20170305054359.8293-3-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-03-05 23:24       ` Kim, Milo
2017-03-19  1:18       ` Sebastian Reichel
2017-03-20  2:30         ` Kim, Milo
2017-03-05  5:43   ` [PATCH 3/6] ARM: dts: omap4-droid4: Add GPIO poweroff Tony Lindgren
     [not found]     ` <20170305054359.8293-4-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-03-19  1:19       ` Sebastian Reichel
2017-03-05  5:43   ` [PATCH 4/6] ARM: dts: omap4-droid4: Add tmp105 sensor for droid 4 Tony Lindgren
     [not found]     ` <20170305054359.8293-5-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-03-19  1:26       ` Sebastian Reichel [this message]
2017-03-05  5:43   ` [PATCH 5/6] ARM: dts: omap4-droid4: Add HDMI support Tony Lindgren
     [not found]     ` <20170305054359.8293-6-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-03-16 22:43       ` Sebastian Reichel
2017-03-05  5:43   ` [PATCH 6/6] ARM: dts: omap4-droid4: Add LCD Tony Lindgren
     [not found]     ` <20170305054359.8293-7-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-03-19  1:29       ` Sebastian Reichel
2017-03-19 16:10         ` Tony Lindgren
     [not found]           ` <20170319161030.GA20572-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-03-19 22:55             ` Sebastian Reichel
2017-03-20  7:52               ` Tomi Valkeinen
     [not found]                 ` <9c4a5d88-4d2a-2120-9fdf-f3fbba69147c-l0cyMroinI0@public.gmane.org>
2017-03-23  6:31                   ` Sebastian Reichel
2017-03-23  7:08                     ` Tomi Valkeinen
     [not found]                       ` <b4666cd6-9925-6143-41c3-591e68c48456-l0cyMroinI0@public.gmane.org>
2017-03-23  8:42                         ` Sebastian Reichel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170319012622.lg7qhqgdbkeqr7vf@earth \
    --to=sre-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
    --cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=michael.scott-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=mpartap-hi6Y0CQ0nG0@public.gmane.org \
    --cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.