From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v1 29/41] net: mvpp2: Enable compilation for Armada 7K/8K platforms
Date: Tue, 21 Mar 2017 15:27:50 +0100 [thread overview]
Message-ID: <20170321142802.24276-30-sr@denx.de> (raw)
In-Reply-To: <20170321142802.24276-1-sr@denx.de>
Since Armada 7K/8K is also equipped with a newer version of the MVPP2
ethernet controller, lets enable compilation of this driver for these
platforms.
Signed-off-by: Stefan Roese <sr@denx.de>
---
drivers/net/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 70e36611ea..8aa92790f4 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -124,12 +124,12 @@ config FEC_MXC
NXP i.MX processors.
config MVPP2
- bool "Marvell Armada 375 network interface support"
- depends on ARMADA_375
+ bool "Marvell Armada 375/7K/8K network interface support"
+ depends on ARMADA_375 || ARMADA_8K
select PHYLIB
help
This driver supports the network interface units in the
- Marvell ARMADA 375 SoC.
+ Marvell ARMADA 375, 7K and 8K SoCs.
config MACB
bool "Cadence MACB/GEM Ethernet Interface"
--
2.12.0
next prev parent reply other threads:[~2017-03-21 14:27 UTC|newest]
Thread overview: 92+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-21 14:27 [U-Boot] [PATCH v1 00/41] Add PPv2.2 support to the mvpp2 ethernet driver and enable it for A7k/8k Stefan Roese
2017-03-21 14:27 ` [U-Boot] [PATCH v1 01/41] bitops.h: Include bitsperlong.h as needed for GENMASK_ULL Stefan Roese
2017-03-21 15:02 ` Tom Rini
2017-03-21 16:53 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 02/41] net: mvpp2: Round up top tx buffer boundaries for dcache ops Stefan Roese
2017-03-21 16:55 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 03/41] net: mvpp2: simplify mvpp2_bm_bufs_add() Stefan Roese
2017-03-21 16:57 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 04/41] net: mvpp2: remove unused register definitions Stefan Roese
2017-03-21 16:58 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 05/41] net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT Stefan Roese
2017-03-21 16:59 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 06/41] net: mvpp2: simplify MVPP2_PRS_RI_* definitions Stefan Roese
2017-03-21 17:01 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 07/41] net: mvpp2: enable building on 64-bit platforms Stefan Roese
2017-03-21 17:02 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 08/41] net: mvpp2: enable building on 64-bit platforms (more U-Boot specific) Stefan Roese
2017-03-21 17:03 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 09/41] net: mvpp2: use "dma" instead of "phys" where appropriate Stefan Roese
2017-03-21 17:04 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 10/41] net: mvpp2: remove support for buffer header Stefan Roese
2017-03-21 17:04 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 11/41] net: mvpp2: store physical address of buffer in rx_desc->buf_cookie Stefan Roese
2017-03-21 17:06 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 12/41] net: mvpp2: add and use accessors for TX/RX descriptors Stefan Roese
2017-03-21 17:07 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 13/41] net: mvpp2: add hw_version field in "struct mvpp2" Stefan Roese
2017-03-21 17:09 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 14/41] net: mvpp2: introduce an intermediate union for the TX/RX descriptors Stefan Roese
2017-03-21 17:10 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 15/41] net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors Stefan Roese
2017-03-21 17:13 ` Joe Hershberger
2017-03-22 7:11 ` Stefan Roese
2017-03-22 8:03 ` Thomas Petazzoni
2017-03-22 8:13 ` Stefan Roese
2017-03-21 14:27 ` [U-Boot] [PATCH v1 16/41] net: mvpp2: adjust the allocation/free of BM pools for PPv2.2 Stefan Roese
2017-03-21 17:18 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 17/41] net: mvpp2: adapt the mvpp2_rxq_*_pool_set functions to PPv2.2 Stefan Roese
2017-03-21 17:21 ` Joe Hershberger
2017-03-22 7:13 ` Stefan Roese
2017-03-21 14:27 ` [U-Boot] [PATCH v1 18/41] net: mvpp2: adapt mvpp2_defaults_set() " Stefan Roese
2017-03-21 17:21 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 19/41] net: mvpp2: adjust mvpp2_{rxq, txq}_init for PPv2.2 Stefan Roese
2017-03-21 17:25 ` Joe Hershberger
2017-03-22 7:17 ` Stefan Roese
2017-03-21 14:27 ` [U-Boot] [PATCH v1 20/41] net: mvpp2: handle register mapping and access " Stefan Roese
2017-03-21 17:33 ` Joe Hershberger
2017-03-22 7:19 ` Stefan Roese
2017-03-21 14:27 ` [U-Boot] [PATCH v1 21/41] net: mvpp2: handle misc PPv2.1/PPv2.2 differences Stefan Roese
2017-03-21 17:35 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 22/41] net: mvpp2: add AXI bridge initialization for PPv2.2 Stefan Roese
2017-03-21 17:36 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 23/41] net: mvpp2: rework RXQ interrupt group " Stefan Roese
2017-03-21 17:38 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 24/41] net: mvpp2: adapt rxq distribution to PPv2.2 Stefan Roese
2017-03-21 17:42 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 25/41] net: mvpp2: finally add the PPv2.2 compatible string Stefan Roese
2017-03-21 17:42 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 26/41] net: mvpp2: Add MDIO support for PPv2.2 Stefan Roese
2017-03-21 17:44 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 27/41] net: mvpp2: Move probe function from MISC to ETH DM driver Stefan Roese
2017-03-21 17:47 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 28/41] net: mvpp2.c: Clear all buffer / descriptor areas before usage Stefan Roese
2017-03-21 17:47 ` Joe Hershberger
2017-03-21 14:27 ` Stefan Roese [this message]
2017-03-21 17:50 ` [U-Boot] [PATCH v1 29/41] net: mvpp2: Enable compilation for Armada 7K/8K platforms Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 30/41] arm64: marvell: dts: add PPv2.2 description to Armada 7K/8K Stefan Roese
2017-03-21 17:52 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 31/41] arm64: mvebu: armada-7k/8k: Enable MVPP2 ethernet driver Stefan Roese
2017-03-21 17:54 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 32/41] net: mvpp2: Handle eth device naming in multi-CP case correctly Stefan Roese
2017-03-21 17:56 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 33/41] net: mvpp2: Add remove function that is called before the OS is started Stefan Roese
2017-03-21 17:57 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 34/41] net: mvpp2: Add RX and TX FIFO configuration for PPv2.2 Stefan Roese
2017-03-21 17:59 ` Joe Hershberger
2017-03-22 7:27 ` Stefan Roese
2017-03-21 14:27 ` [U-Boot] [PATCH v1 35/41] net: include/phy.h: Add new PHY interface modes Stefan Roese
2017-03-21 18:00 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 36/41] net: mvpp2: Add Group-of-Ports and Net-Compex configuration for PPv2.2 Stefan Roese
2017-03-21 18:03 ` Joe Hershberger
2017-03-22 7:50 ` Stefan Roese
2017-03-21 14:27 ` [U-Boot] [PATCH v1 37/41] net: mvpp2: Enable PHY polling mode on PPv2.2 Stefan Roese
2017-03-21 18:04 ` Joe Hershberger
2017-03-21 14:27 ` [U-Boot] [PATCH v1 38/41] net: mvpp2: Configure SMI PHY address needed for PHY polling Stefan Roese
2017-03-21 18:05 ` Joe Hershberger
2017-03-21 14:28 ` [U-Boot] [PATCH v1 39/41] net: mvpp2: Remove unreferenced in_use_thresh from struct mvpp2_bm_pool Stefan Roese
2017-03-21 18:06 ` Joe Hershberger
2017-03-21 14:28 ` [U-Boot] [PATCH v1 40/41] arm64: mvebu: armada-7040-db.dts: Change eth1 speed from 2.5G to 1G Stefan Roese
2017-03-21 18:06 ` Joe Hershberger
2017-03-21 14:28 ` [U-Boot] [PATCH v1 41/41] arm64: mvebu: Enable CONFIG_PHY_MARVELL in Armada7k/8k-DB defconfig Stefan Roese
2017-03-21 18:07 ` Joe Hershberger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170321142802.24276-30-sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.