* [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg
@ 2017-03-20 23:35 Bjorn Andersson
2017-03-20 23:35 ` [PATCH 2/3] soc: qcom: smd: Remove standalone driver Bjorn Andersson
` (4 more replies)
0 siblings, 5 replies; 24+ messages in thread
From: Bjorn Andersson @ 2017-03-20 23:35 UTC (permalink / raw)
To: Marcel Holtmann, Gustavo Padovan, Johan Hedberg,
Eugene Krasnikov, Kalle Valo, Andy Gross, David Brown,
David S. Miller
Cc: Arnd Bergmann, linux-bluetooth, linux-kernel, wcn36xx,
linux-wireless, netdev, linux-arm-msm, linux-soc
By moving these client drivers to use RPMSG instead of the direct SMD
API we can reuse them ontop of the newly added GLINK wire-protocol
support found in the 820 and 835 Qualcomm platforms.
As the new (RPMSG-based) and old SMD implementations are mutually
exclusive we have to change all client drivers in one commit, to make
sure we have a working system before and after this transition.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Based on v4.11-rc3 with Arnd's Kconfig dependency fixes for BT_QCOMSMD
(https://lkml.org/lkml/2017/3/20/1038).
drivers/bluetooth/Kconfig | 2 +-
drivers/bluetooth/btqcomsmd.c | 32 +++++++++----------
drivers/net/wireless/ath/wcn36xx/Kconfig | 2 +-
drivers/net/wireless/ath/wcn36xx/main.c | 6 ++--
drivers/net/wireless/ath/wcn36xx/smd.c | 10 +++---
drivers/net/wireless/ath/wcn36xx/smd.h | 6 ++--
drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 2 +-
drivers/soc/qcom/Kconfig | 4 +--
drivers/soc/qcom/smd-rpm.c | 43 +++++++++++++------------
drivers/soc/qcom/wcnss_ctrl.c | 50 +++++++++++++++++-------------
include/linux/soc/qcom/wcnss_ctrl.h | 11 ++++---
net/qrtr/Kconfig | 2 +-
net/qrtr/smd.c | 42 ++++++++++++-------------
13 files changed, 108 insertions(+), 104 deletions(-)
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 08e054507d0b..a6a9dd4d0eef 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -344,7 +344,7 @@ config BT_WILINK
config BT_QCOMSMD
tristate "Qualcomm SMD based HCI support"
- depends on QCOM_SMD || (COMPILE_TEST && QCOM_SMD=n)
+ depends on RPMSG || (COMPILE_TEST && RPMSG=n)
depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
select BT_QCA
help
diff --git a/drivers/bluetooth/btqcomsmd.c b/drivers/bluetooth/btqcomsmd.c
index 8d4868af9bbd..ef730c173d4b 100644
--- a/drivers/bluetooth/btqcomsmd.c
+++ b/drivers/bluetooth/btqcomsmd.c
@@ -14,7 +14,7 @@
#include <linux/module.h>
#include <linux/slab.h>
-#include <linux/soc/qcom/smd.h>
+#include <linux/rpmsg.h>
#include <linux/soc/qcom/wcnss_ctrl.h>
#include <linux/platform_device.h>
@@ -26,8 +26,8 @@
struct btqcomsmd {
struct hci_dev *hdev;
- struct qcom_smd_channel *acl_channel;
- struct qcom_smd_channel *cmd_channel;
+ struct rpmsg_endpoint *acl_channel;
+ struct rpmsg_endpoint *cmd_channel;
};
static int btqcomsmd_recv(struct hci_dev *hdev, unsigned int type,
@@ -48,19 +48,19 @@ static int btqcomsmd_recv(struct hci_dev *hdev, unsigned int type,
return hci_recv_frame(hdev, skb);
}
-static int btqcomsmd_acl_callback(struct qcom_smd_channel *channel,
- const void *data, size_t count)
+static int btqcomsmd_acl_callback(struct rpmsg_device *rpdev, void *data,
+ int count, void *priv, u32 addr)
{
- struct btqcomsmd *btq = qcom_smd_get_drvdata(channel);
+ struct btqcomsmd *btq = priv;
btq->hdev->stat.byte_rx += count;
return btqcomsmd_recv(btq->hdev, HCI_ACLDATA_PKT, data, count);
}
-static int btqcomsmd_cmd_callback(struct qcom_smd_channel *channel,
- const void *data, size_t count)
+static int btqcomsmd_cmd_callback(struct rpmsg_device *rpdev, void *data,
+ int count, void *priv, u32 addr)
{
- struct btqcomsmd *btq = qcom_smd_get_drvdata(channel);
+ struct btqcomsmd *btq = priv;
return btqcomsmd_recv(btq->hdev, HCI_EVENT_PKT, data, count);
}
@@ -72,12 +72,12 @@ static int btqcomsmd_send(struct hci_dev *hdev, struct sk_buff *skb)
switch (hci_skb_pkt_type(skb)) {
case HCI_ACLDATA_PKT:
- ret = qcom_smd_send(btq->acl_channel, skb->data, skb->len);
+ ret = rpmsg_send(btq->acl_channel, skb->data, skb->len);
hdev->stat.acl_tx++;
hdev->stat.byte_tx += skb->len;
break;
case HCI_COMMAND_PKT:
- ret = qcom_smd_send(btq->cmd_channel, skb->data, skb->len);
+ ret = rpmsg_send(btq->cmd_channel, skb->data, skb->len);
hdev->stat.cmd_tx++;
break;
default:
@@ -114,18 +114,15 @@ static int btqcomsmd_probe(struct platform_device *pdev)
wcnss = dev_get_drvdata(pdev->dev.parent);
btq->acl_channel = qcom_wcnss_open_channel(wcnss, "APPS_RIVA_BT_ACL",
- btqcomsmd_acl_callback);
+ btqcomsmd_acl_callback, btq);
if (IS_ERR(btq->acl_channel))
return PTR_ERR(btq->acl_channel);
btq->cmd_channel = qcom_wcnss_open_channel(wcnss, "APPS_RIVA_BT_CMD",
- btqcomsmd_cmd_callback);
+ btqcomsmd_cmd_callback, btq);
if (IS_ERR(btq->cmd_channel))
return PTR_ERR(btq->cmd_channel);
- qcom_smd_set_drvdata(btq->acl_channel, btq);
- qcom_smd_set_drvdata(btq->cmd_channel, btq);
-
hdev = hci_alloc_dev();
if (!hdev)
return -ENOMEM;
@@ -158,6 +155,9 @@ static int btqcomsmd_remove(struct platform_device *pdev)
hci_unregister_dev(btq->hdev);
hci_free_dev(btq->hdev);
+ rpmsg_destroy_ept(btq->cmd_channel);
+ rpmsg_destroy_ept(btq->acl_channel);
+
return 0;
}
diff --git a/drivers/net/wireless/ath/wcn36xx/Kconfig b/drivers/net/wireless/ath/wcn36xx/Kconfig
index 4b83e87f0b94..20bf967a70b9 100644
--- a/drivers/net/wireless/ath/wcn36xx/Kconfig
+++ b/drivers/net/wireless/ath/wcn36xx/Kconfig
@@ -2,7 +2,7 @@ config WCN36XX
tristate "Qualcomm Atheros WCN3660/3680 support"
depends on MAC80211 && HAS_DMA
depends on QCOM_WCNSS_CTRL || QCOM_WCNSS_CTRL=n
- depends on QCOM_SMD || QCOM_SMD=n
+ depends on RPMSG || RPMSG=n
---help---
This module adds support for wireless adapters based on
Qualcomm Atheros WCN3660 and WCN3680 mobile chipsets.
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 7a0c2e7da7f6..bb7110f7fc86 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -22,7 +22,7 @@
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
-#include <linux/soc/qcom/smd.h>
+#include <linux/rpmsg.h>
#include <linux/soc/qcom/smem_state.h>
#include <linux/soc/qcom/wcnss_ctrl.h>
#include "wcn36xx.h"
@@ -1218,15 +1218,13 @@ static int wcn36xx_probe(struct platform_device *pdev)
INIT_WORK(&wcn->scan_work, wcn36xx_hw_scan_worker);
- wcn->smd_channel = qcom_wcnss_open_channel(wcnss, "WLAN_CTRL", wcn36xx_smd_rsp_process);
+ wcn->smd_channel = qcom_wcnss_open_channel(wcnss, "WLAN_CTRL", wcn36xx_smd_rsp_process, hw);
if (IS_ERR(wcn->smd_channel)) {
wcn36xx_err("failed to open WLAN_CTRL channel\n");
ret = PTR_ERR(wcn->smd_channel);
goto out_wq;
}
- qcom_smd_set_drvdata(wcn->smd_channel, hw);
-
addr = of_get_property(pdev->dev.of_node, "local-mac-address", &ret);
if (addr && ret != ETH_ALEN) {
wcn36xx_err("invalid local-mac-address\n");
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 1c2966f7db7a..9c6590d5348a 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -19,7 +19,7 @@
#include <linux/etherdevice.h>
#include <linux/firmware.h>
#include <linux/bitops.h>
-#include <linux/soc/qcom/smd.h>
+#include <linux/rpmsg.h>
#include "smd.h"
struct wcn36xx_cfg_val {
@@ -254,7 +254,7 @@ static int wcn36xx_smd_send_and_wait(struct wcn36xx *wcn, size_t len)
init_completion(&wcn->hal_rsp_compl);
start = jiffies;
- ret = qcom_smd_send(wcn->smd_channel, wcn->hal_buf, len);
+ ret = rpmsg_send(wcn->smd_channel, wcn->hal_buf, len);
if (ret) {
wcn36xx_err("HAL TX failed\n");
goto out;
@@ -2205,11 +2205,11 @@ int wcn36xx_smd_set_mc_list(struct wcn36xx *wcn,
return ret;
}
-int wcn36xx_smd_rsp_process(struct qcom_smd_channel *channel,
- const void *buf, size_t len)
+int wcn36xx_smd_rsp_process(struct rpmsg_device *rpdev,
+ void *buf, int len, void *priv, u32 addr)
{
const struct wcn36xx_hal_msg_header *msg_header = buf;
- struct ieee80211_hw *hw = qcom_smd_get_drvdata(channel);
+ struct ieee80211_hw *hw = priv;
struct wcn36xx *wcn = hw->priv;
struct wcn36xx_hal_ind_msg *msg_ind;
wcn36xx_dbg_dump(WCN36XX_DBG_SMD_DUMP, "SMD <<< ", buf, len);
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.h b/drivers/net/wireless/ath/wcn36xx/smd.h
index 8892ccd67b14..013fc9546f56 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.h
+++ b/drivers/net/wireless/ath/wcn36xx/smd.h
@@ -51,7 +51,7 @@ struct wcn36xx_hal_ind_msg {
};
struct wcn36xx;
-struct qcom_smd_channel;
+struct rpmsg_device;
int wcn36xx_smd_open(struct wcn36xx *wcn);
void wcn36xx_smd_close(struct wcn36xx *wcn);
@@ -129,8 +129,8 @@ int wcn36xx_smd_trigger_ba(struct wcn36xx *wcn, u8 sta_index);
int wcn36xx_smd_update_cfg(struct wcn36xx *wcn, u32 cfg_id, u32 value);
-int wcn36xx_smd_rsp_process(struct qcom_smd_channel *channel,
- const void *buf, size_t len);
+int wcn36xx_smd_rsp_process(struct rpmsg_device *rpdev,
+ void *buf, int len, void *priv, u32 addr);
int wcn36xx_smd_set_mc_list(struct wcn36xx *wcn,
struct ieee80211_vif *vif,
diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
index 7423998ddeb4..b52b4da9a967 100644
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -195,7 +195,7 @@ struct wcn36xx {
void __iomem *ccu_base;
void __iomem *dxe_base;
- struct qcom_smd_channel *smd_channel;
+ struct rpmsg_endpoint *smd_channel;
struct qcom_smem_state *tx_enable_state;
unsigned tx_enable_state_bit;
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 78b1bb7bcf20..751dce0c19b3 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -43,7 +43,7 @@ config QCOM_SMD
config QCOM_SMD_RPM
tristate "Qualcomm Resource Power Manager (RPM) over SMD"
- depends on QCOM_SMD && OF
+ depends on RPMSG && OF
help
If you say yes to this option, support will be included for the
Resource Power Manager system found in the Qualcomm 8974 based
@@ -76,7 +76,7 @@ config QCOM_SMSM
config QCOM_WCNSS_CTRL
tristate "Qualcomm WCNSS control driver"
- depends on QCOM_SMD
+ depends on RPMSG
help
Client driver for the WCNSS_CTRL SMD channel, used to download nv
firmware to a newly booted WCNSS chip.
diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c
index 6609d7e0edb0..0dcf1bf33126 100644
--- a/drivers/soc/qcom/smd-rpm.c
+++ b/drivers/soc/qcom/smd-rpm.c
@@ -19,7 +19,7 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
-#include <linux/soc/qcom/smd.h>
+#include <linux/rpmsg.h>
#include <linux/soc/qcom/smd-rpm.h>
#define RPM_REQUEST_TIMEOUT (5 * HZ)
@@ -32,7 +32,7 @@
* @ack_status: result of the rpm request
*/
struct qcom_smd_rpm {
- struct qcom_smd_channel *rpm_channel;
+ struct rpmsg_endpoint *rpm_channel;
struct device *dev;
struct completion ack;
@@ -133,7 +133,7 @@ int qcom_rpm_smd_write(struct qcom_smd_rpm *rpm,
pkt->req.data_len = cpu_to_le32(count);
memcpy(pkt->payload, buf, count);
- ret = qcom_smd_send(rpm->rpm_channel, pkt, size);
+ ret = rpmsg_send(rpm->rpm_channel, pkt, size);
if (ret)
goto out;
@@ -150,14 +150,16 @@ int qcom_rpm_smd_write(struct qcom_smd_rpm *rpm,
}
EXPORT_SYMBOL(qcom_rpm_smd_write);
-static int qcom_smd_rpm_callback(struct qcom_smd_channel *channel,
- const void *data,
- size_t count)
+static int qcom_smd_rpm_callback(struct rpmsg_device *rpdev,
+ void *data,
+ int count,
+ void *priv,
+ u32 addr)
{
const struct qcom_rpm_header *hdr = data;
size_t hdr_length = le32_to_cpu(hdr->length);
const struct qcom_rpm_message *msg;
- struct qcom_smd_rpm *rpm = qcom_smd_get_drvdata(channel);
+ struct qcom_smd_rpm *rpm = dev_get_drvdata(&rpdev->dev);
const u8 *buf = data + sizeof(struct qcom_rpm_header);
const u8 *end = buf + hdr_length;
char msgbuf[32];
@@ -196,29 +198,27 @@ static int qcom_smd_rpm_callback(struct qcom_smd_channel *channel,
return 0;
}
-static int qcom_smd_rpm_probe(struct qcom_smd_device *sdev)
+static int qcom_smd_rpm_probe(struct rpmsg_device *rpdev)
{
struct qcom_smd_rpm *rpm;
- rpm = devm_kzalloc(&sdev->dev, sizeof(*rpm), GFP_KERNEL);
+ rpm = devm_kzalloc(&rpdev->dev, sizeof(*rpm), GFP_KERNEL);
if (!rpm)
return -ENOMEM;
mutex_init(&rpm->lock);
init_completion(&rpm->ack);
- rpm->dev = &sdev->dev;
- rpm->rpm_channel = sdev->channel;
- qcom_smd_set_drvdata(sdev->channel, rpm);
+ rpm->dev = &rpdev->dev;
+ rpm->rpm_channel = rpdev->ept;
+ dev_set_drvdata(&rpdev->dev, rpm);
- dev_set_drvdata(&sdev->dev, rpm);
-
- return of_platform_populate(sdev->dev.of_node, NULL, NULL, &sdev->dev);
+ return of_platform_populate(rpdev->dev.of_node, NULL, NULL, &rpdev->dev);
}
-static void qcom_smd_rpm_remove(struct qcom_smd_device *sdev)
+static void qcom_smd_rpm_remove(struct rpmsg_device *rpdev)
{
- of_platform_depopulate(&sdev->dev);
+ of_platform_depopulate(&rpdev->dev);
}
static const struct of_device_id qcom_smd_rpm_of_match[] = {
@@ -229,26 +229,25 @@ static const struct of_device_id qcom_smd_rpm_of_match[] = {
};
MODULE_DEVICE_TABLE(of, qcom_smd_rpm_of_match);
-static struct qcom_smd_driver qcom_smd_rpm_driver = {
+static struct rpmsg_driver qcom_smd_rpm_driver = {
.probe = qcom_smd_rpm_probe,
.remove = qcom_smd_rpm_remove,
.callback = qcom_smd_rpm_callback,
- .driver = {
+ .drv = {
.name = "qcom_smd_rpm",
- .owner = THIS_MODULE,
.of_match_table = qcom_smd_rpm_of_match,
},
};
static int __init qcom_smd_rpm_init(void)
{
- return qcom_smd_driver_register(&qcom_smd_rpm_driver);
+ return register_rpmsg_driver(&qcom_smd_rpm_driver);
}
arch_initcall(qcom_smd_rpm_init);
static void __exit qcom_smd_rpm_exit(void)
{
- qcom_smd_driver_unregister(&qcom_smd_rpm_driver);
+ unregister_rpmsg_driver(&qcom_smd_rpm_driver);
}
module_exit(qcom_smd_rpm_exit);
diff --git a/drivers/soc/qcom/wcnss_ctrl.c b/drivers/soc/qcom/wcnss_ctrl.c
index 520aedd29965..b9069184df19 100644
--- a/drivers/soc/qcom/wcnss_ctrl.c
+++ b/drivers/soc/qcom/wcnss_ctrl.c
@@ -14,10 +14,10 @@
#include <linux/firmware.h>
#include <linux/module.h>
#include <linux/slab.h>
-#include <linux/soc/qcom/smd.h>
#include <linux/io.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
+#include <linux/rpmsg.h>
#include <linux/soc/qcom/wcnss_ctrl.h>
#define WCNSS_REQUEST_TIMEOUT (5 * HZ)
@@ -40,7 +40,7 @@
*/
struct wcnss_ctrl {
struct device *dev;
- struct qcom_smd_channel *channel;
+ struct rpmsg_endpoint *channel;
struct completion ack;
struct completion cbc;
@@ -122,11 +122,13 @@ struct wcnss_download_nv_resp {
*
* Handles any incoming packets from the remote WCNSS_CTRL service.
*/
-static int wcnss_ctrl_smd_callback(struct qcom_smd_channel *channel,
- const void *data,
- size_t count)
+static int wcnss_ctrl_smd_callback(struct rpmsg_device *rpdev,
+ void *data,
+ int count,
+ void *priv,
+ u32 addr)
{
- struct wcnss_ctrl *wcnss = qcom_smd_get_drvdata(channel);
+ struct wcnss_ctrl *wcnss = dev_get_drvdata(&rpdev->dev);
const struct wcnss_download_nv_resp *nvresp;
const struct wcnss_version_resp *version;
const struct wcnss_msg_hdr *hdr = data;
@@ -180,7 +182,7 @@ static int wcnss_request_version(struct wcnss_ctrl *wcnss)
msg.type = WCNSS_VERSION_REQ;
msg.len = sizeof(msg);
- ret = qcom_smd_send(wcnss->channel, &msg, sizeof(msg));
+ ret = rpmsg_send(wcnss->channel, &msg, sizeof(msg));
if (ret < 0)
return ret;
@@ -238,7 +240,7 @@ static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
memcpy(req->fragment, data, req->frag_size);
- ret = qcom_smd_send(wcnss->channel, req, req->hdr.len);
+ ret = rpmsg_send(wcnss->channel, req, req->hdr.len);
if (ret < 0) {
dev_err(wcnss->dev, "failed to send smd packet\n");
goto release_fw;
@@ -274,11 +276,16 @@ static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
* @name: SMD channel name
* @cb: callback to handle incoming data on the channel
*/
-struct qcom_smd_channel *qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb)
+struct rpmsg_endpoint *qcom_wcnss_open_channel(void *wcnss, const char *name, rpmsg_rx_cb_t cb, void *priv)
{
+ struct rpmsg_channel_info chinfo;
struct wcnss_ctrl *_wcnss = wcnss;
- return qcom_smd_open_channel(_wcnss->channel, name, cb);
+ strncpy(chinfo.name, name, sizeof(chinfo.name));
+ chinfo.src = RPMSG_ADDR_ANY;
+ chinfo.dst = RPMSG_ADDR_ANY;
+
+ return rpmsg_create_ept(_wcnss->channel->rpdev, cb, priv, chinfo);
}
EXPORT_SYMBOL(qcom_wcnss_open_channel);
@@ -306,35 +313,34 @@ static void wcnss_async_probe(struct work_struct *work)
of_platform_populate(wcnss->dev->of_node, NULL, NULL, wcnss->dev);
}
-static int wcnss_ctrl_probe(struct qcom_smd_device *sdev)
+static int wcnss_ctrl_probe(struct rpmsg_device *rpdev)
{
struct wcnss_ctrl *wcnss;
- wcnss = devm_kzalloc(&sdev->dev, sizeof(*wcnss), GFP_KERNEL);
+ wcnss = devm_kzalloc(&rpdev->dev, sizeof(*wcnss), GFP_KERNEL);
if (!wcnss)
return -ENOMEM;
- wcnss->dev = &sdev->dev;
- wcnss->channel = sdev->channel;
+ wcnss->dev = &rpdev->dev;
+ wcnss->channel = rpdev->ept;
init_completion(&wcnss->ack);
init_completion(&wcnss->cbc);
INIT_WORK(&wcnss->probe_work, wcnss_async_probe);
- qcom_smd_set_drvdata(sdev->channel, wcnss);
- dev_set_drvdata(&sdev->dev, wcnss);
+ dev_set_drvdata(&rpdev->dev, wcnss);
schedule_work(&wcnss->probe_work);
return 0;
}
-static void wcnss_ctrl_remove(struct qcom_smd_device *sdev)
+static void wcnss_ctrl_remove(struct rpmsg_device *rpdev)
{
- struct wcnss_ctrl *wcnss = qcom_smd_get_drvdata(sdev->channel);
+ struct wcnss_ctrl *wcnss = dev_get_drvdata(&rpdev->dev);
cancel_work_sync(&wcnss->probe_work);
- of_platform_depopulate(&sdev->dev);
+ of_platform_depopulate(&rpdev->dev);
}
static const struct of_device_id wcnss_ctrl_of_match[] = {
@@ -342,18 +348,18 @@ static const struct of_device_id wcnss_ctrl_of_match[] = {
{}
};
-static struct qcom_smd_driver wcnss_ctrl_driver = {
+static struct rpmsg_driver wcnss_ctrl_driver = {
.probe = wcnss_ctrl_probe,
.remove = wcnss_ctrl_remove,
.callback = wcnss_ctrl_smd_callback,
- .driver = {
+ .drv = {
.name = "qcom_wcnss_ctrl",
.owner = THIS_MODULE,
.of_match_table = wcnss_ctrl_of_match,
},
};
-module_qcom_smd_driver(wcnss_ctrl_driver);
+module_rpmsg_driver(wcnss_ctrl_driver);
MODULE_DESCRIPTION("Qualcomm WCNSS control driver");
MODULE_LICENSE("GPL v2");
diff --git a/include/linux/soc/qcom/wcnss_ctrl.h b/include/linux/soc/qcom/wcnss_ctrl.h
index eab64976a73b..a4dd4d7c711d 100644
--- a/include/linux/soc/qcom/wcnss_ctrl.h
+++ b/include/linux/soc/qcom/wcnss_ctrl.h
@@ -1,16 +1,19 @@
#ifndef __WCNSS_CTRL_H__
#define __WCNSS_CTRL_H__
-#include <linux/soc/qcom/smd.h>
+#include <linux/rpmsg.h>
#if IS_ENABLED(CONFIG_QCOM_WCNSS_CTRL)
-struct qcom_smd_channel *qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb);
+struct rpmsg_endpoint *qcom_wcnss_open_channel(void *wcnss, const char *name,
+ rpmsg_rx_cb_t cb, void *priv);
#else
-static inline struct qcom_smd_channel*
-qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb)
+static struct rpmsg_endpoint *qcom_wcnss_open_channel(void *wcnss,
+ const char *name,
+ rpmsg_rx_cb_t cb,
+ void *priv)
{
WARN_ON(1);
return ERR_PTR(-ENXIO);
diff --git a/net/qrtr/Kconfig b/net/qrtr/Kconfig
index b83c6807a5ae..326fd97444f5 100644
--- a/net/qrtr/Kconfig
+++ b/net/qrtr/Kconfig
@@ -16,7 +16,7 @@ if QRTR
config QRTR_SMD
tristate "SMD IPC Router channels"
- depends on QCOM_SMD || (COMPILE_TEST && QCOM_SMD=n)
+ depends on RPMSG || (COMPILE_TEST && RPMSG=n)
---help---
Say Y here to support SMD based ipcrouter channels. SMD is the
most common transport for IPC Router.
diff --git a/net/qrtr/smd.c b/net/qrtr/smd.c
index 0d11132b3370..50615d5efac1 100644
--- a/net/qrtr/smd.c
+++ b/net/qrtr/smd.c
@@ -14,21 +14,21 @@
#include <linux/module.h>
#include <linux/skbuff.h>
-#include <linux/soc/qcom/smd.h>
+#include <linux/rpmsg.h>
#include "qrtr.h"
struct qrtr_smd_dev {
struct qrtr_endpoint ep;
- struct qcom_smd_channel *channel;
+ struct rpmsg_endpoint *channel;
struct device *dev;
};
/* from smd to qrtr */
-static int qcom_smd_qrtr_callback(struct qcom_smd_channel *channel,
- const void *data, size_t len)
+static int qcom_smd_qrtr_callback(struct rpmsg_device *rpdev,
+ void *data, int len, void *priv, u32 addr)
{
- struct qrtr_smd_dev *qdev = qcom_smd_get_drvdata(channel);
+ struct qrtr_smd_dev *qdev = dev_get_drvdata(&rpdev->dev);
int rc;
if (!qdev)
@@ -54,7 +54,7 @@ static int qcom_smd_qrtr_send(struct qrtr_endpoint *ep, struct sk_buff *skb)
if (rc)
goto out;
- rc = qcom_smd_send(qdev->channel, skb->data, skb->len);
+ rc = rpmsg_send(qdev->channel, skb->data, skb->len);
out:
if (rc)
@@ -64,57 +64,55 @@ static int qcom_smd_qrtr_send(struct qrtr_endpoint *ep, struct sk_buff *skb)
return rc;
}
-static int qcom_smd_qrtr_probe(struct qcom_smd_device *sdev)
+static int qcom_smd_qrtr_probe(struct rpmsg_device *rpdev)
{
struct qrtr_smd_dev *qdev;
int rc;
- qdev = devm_kzalloc(&sdev->dev, sizeof(*qdev), GFP_KERNEL);
+ qdev = devm_kzalloc(&rpdev->dev, sizeof(*qdev), GFP_KERNEL);
if (!qdev)
return -ENOMEM;
- qdev->channel = sdev->channel;
- qdev->dev = &sdev->dev;
+ qdev->channel = rpdev->ept;
+ qdev->dev = &rpdev->dev;
qdev->ep.xmit = qcom_smd_qrtr_send;
rc = qrtr_endpoint_register(&qdev->ep, QRTR_EP_NID_AUTO);
if (rc)
return rc;
- qcom_smd_set_drvdata(sdev->channel, qdev);
- dev_set_drvdata(&sdev->dev, qdev);
+ dev_set_drvdata(&rpdev->dev, qdev);
- dev_dbg(&sdev->dev, "Qualcomm SMD QRTR driver probed\n");
+ dev_dbg(&rpdev->dev, "Qualcomm SMD QRTR driver probed\n");
return 0;
}
-static void qcom_smd_qrtr_remove(struct qcom_smd_device *sdev)
+static void qcom_smd_qrtr_remove(struct rpmsg_device *rpdev)
{
- struct qrtr_smd_dev *qdev = dev_get_drvdata(&sdev->dev);
+ struct qrtr_smd_dev *qdev = dev_get_drvdata(&rpdev->dev);
qrtr_endpoint_unregister(&qdev->ep);
- dev_set_drvdata(&sdev->dev, NULL);
+ dev_set_drvdata(&rpdev->dev, NULL);
}
-static const struct qcom_smd_id qcom_smd_qrtr_smd_match[] = {
+static const struct rpmsg_device_id qcom_smd_qrtr_smd_match[] = {
{ "IPCRTR" },
{}
};
-static struct qcom_smd_driver qcom_smd_qrtr_driver = {
+static struct rpmsg_driver qcom_smd_qrtr_driver = {
.probe = qcom_smd_qrtr_probe,
.remove = qcom_smd_qrtr_remove,
.callback = qcom_smd_qrtr_callback,
- .smd_match_table = qcom_smd_qrtr_smd_match,
- .driver = {
+ .id_table = qcom_smd_qrtr_smd_match,
+ .drv = {
.name = "qcom_smd_qrtr",
- .owner = THIS_MODULE,
},
};
-module_qcom_smd_driver(qcom_smd_qrtr_driver);
+module_rpmsg_driver(qcom_smd_qrtr_driver);
MODULE_DESCRIPTION("Qualcomm IPC-Router SMD interface driver");
MODULE_LICENSE("GPL v2");
--
2.12.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 2/3] soc: qcom: smd: Remove standalone driver
2017-03-20 23:35 [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg Bjorn Andersson
@ 2017-03-20 23:35 ` Bjorn Andersson
2017-03-22 21:53 ` Andy Gross
2017-03-20 23:35 ` Bjorn Andersson
` (3 subsequent siblings)
4 siblings, 1 reply; 24+ messages in thread
From: Bjorn Andersson @ 2017-03-20 23:35 UTC (permalink / raw)
To: Andy Gross
Cc: Marcel Holtmann, Gustavo Padovan, Johan Hedberg,
Eugene Krasnikov, Kalle Valo, David Brown, David S. Miller,
Arnd Bergmann, linux-bluetooth, linux-kernel, wcn36xx,
linux-wireless, netdev, linux-arm-msm, linux-soc
Remove the standalone SMD implementation as we have transitioned the
client drivers to use the RPMSG based one.
Also remove all dependencies on QCOM_SMD from Kconfig files, in order to
keep them selectable in the absence of the removed symbol.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Based on v4.11-rc3 with Arnd's Kconfig dependency fixes in remoteproc
(https://lkml.org/lkml/2017/3/20/1027).
drivers/remoteproc/Kconfig | 6 +-
drivers/rpmsg/Kconfig | 1 -
drivers/soc/qcom/Kconfig | 8 -
drivers/soc/qcom/Makefile | 1 -
drivers/soc/qcom/smd.c | 1560 ----------------------------------------
include/linux/rpmsg/qcom_smd.h | 2 +-
include/linux/soc/qcom/smd.h | 139 ----
7 files changed, 4 insertions(+), 1713 deletions(-)
delete mode 100644 drivers/soc/qcom/smd.c
delete mode 100644 include/linux/soc/qcom/smd.h
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index 1dc43fc5f65f..faad69a1a597 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -76,7 +76,7 @@ config QCOM_ADSP_PIL
depends on OF && ARCH_QCOM
depends on REMOTEPROC
depends on QCOM_SMEM
- depends on RPMSG_QCOM_SMD || QCOM_SMD || (COMPILE_TEST && QCOM_SMD=n && RPMSG_QCOM_SMD=n)
+ depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
select MFD_SYSCON
select QCOM_MDT_LOADER
select QCOM_RPROC_COMMON
@@ -93,7 +93,7 @@ config QCOM_Q6V5_PIL
depends on OF && ARCH_QCOM
depends on QCOM_SMEM
depends on REMOTEPROC
- depends on RPMSG_QCOM_SMD || QCOM_SMD || (COMPILE_TEST && QCOM_SMD=n && RPMSG_QCOM_SMD=n)
+ depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
select MFD_SYSCON
select QCOM_RPROC_COMMON
select QCOM_SCM
@@ -104,7 +104,7 @@ config QCOM_Q6V5_PIL
config QCOM_WCNSS_PIL
tristate "Qualcomm WCNSS Peripheral Image Loader"
depends on OF && ARCH_QCOM
- depends on RPMSG_QCOM_SMD || QCOM_SMD || (COMPILE_TEST && QCOM_SMD=n && RPMSG_QCOM_SMD=n)
+ depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
depends on QCOM_SMEM
depends on REMOTEPROC
select QCOM_MDT_LOADER
diff --git a/drivers/rpmsg/Kconfig b/drivers/rpmsg/Kconfig
index f12ac0b28263..edc008f55663 100644
--- a/drivers/rpmsg/Kconfig
+++ b/drivers/rpmsg/Kconfig
@@ -16,7 +16,6 @@ config RPMSG_CHAR
config RPMSG_QCOM_SMD
tristate "Qualcomm Shared Memory Driver (SMD)"
depends on QCOM_SMEM
- depends on QCOM_SMD=n
select RPMSG
help
Say y here to enable support for the Qualcomm Shared Memory Driver
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 751dce0c19b3..4428a580a995 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -33,14 +33,6 @@ config QCOM_SMEM
The driver provides an interface to items in a heap shared among all
processors in a Qualcomm platform.
-config QCOM_SMD
- tristate "Qualcomm Shared Memory Driver (SMD)"
- depends on QCOM_SMEM
- help
- Say y here to enable support for the Qualcomm Shared Memory Driver
- providing communication channels to remote processors in Qualcomm
- platforms.
-
config QCOM_SMD_RPM
tristate "Qualcomm Resource Power Manager (RPM) over SMD"
depends on RPMSG && OF
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 1f30260b06b8..414f0de274fa 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -1,7 +1,6 @@
obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
obj-$(CONFIG_QCOM_MDT_LOADER) += mdt_loader.o
obj-$(CONFIG_QCOM_PM) += spm.o
-obj-$(CONFIG_QCOM_SMD) += smd.o
obj-$(CONFIG_QCOM_SMD_RPM) += smd-rpm.o
obj-$(CONFIG_QCOM_SMEM) += smem.o
obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
diff --git a/drivers/soc/qcom/smd.c b/drivers/soc/qcom/smd.c
deleted file mode 100644
index 322034ab9d37..000000000000
--- a/drivers/soc/qcom/smd.c
+++ /dev/null
@@ -1,1560 +0,0 @@
-/*
- * Copyright (c) 2015, Sony Mobile Communications AB.
- * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/mfd/syscon.h>
-#include <linux/module.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/soc/qcom/smd.h>
-#include <linux/soc/qcom/smem.h>
-#include <linux/wait.h>
-
-/*
- * The Qualcomm Shared Memory communication solution provides point-to-point
- * channels for clients to send and receive streaming or packet based data.
- *
- * Each channel consists of a control item (channel info) and a ring buffer
- * pair. The channel info carry information related to channel state, flow
- * control and the offsets within the ring buffer.
- *
- * All allocated channels are listed in an allocation table, identifying the
- * pair of items by name, type and remote processor.
- *
- * Upon creating a new channel the remote processor allocates channel info and
- * ring buffer items from the smem heap and populate the allocation table. An
- * interrupt is sent to the other end of the channel and a scan for new
- * channels should be done. A channel never goes away, it will only change
- * state.
- *
- * The remote processor signals it intent for bring up the communication
- * channel by setting the state of its end of the channel to "opening" and
- * sends out an interrupt. We detect this change and register a smd device to
- * consume the channel. Upon finding a consumer we finish the handshake and the
- * channel is up.
- *
- * Upon closing a channel, the remote processor will update the state of its
- * end of the channel and signal us, we will then unregister any attached
- * device and close our end of the channel.
- *
- * Devices attached to a channel can use the qcom_smd_send function to push
- * data to the channel, this is done by copying the data into the tx ring
- * buffer, updating the pointers in the channel info and signaling the remote
- * processor.
- *
- * The remote processor does the equivalent when it transfer data and upon
- * receiving the interrupt we check the channel info for new data and delivers
- * this to the attached device. If the device is not ready to receive the data
- * we leave it in the ring buffer for now.
- */
-
-struct smd_channel_info;
-struct smd_channel_info_pair;
-struct smd_channel_info_word;
-struct smd_channel_info_word_pair;
-
-#define SMD_ALLOC_TBL_COUNT 2
-#define SMD_ALLOC_TBL_SIZE 64
-
-/*
- * This lists the various smem heap items relevant for the allocation table and
- * smd channel entries.
- */
-static const struct {
- unsigned alloc_tbl_id;
- unsigned info_base_id;
- unsigned fifo_base_id;
-} smem_items[SMD_ALLOC_TBL_COUNT] = {
- {
- .alloc_tbl_id = 13,
- .info_base_id = 14,
- .fifo_base_id = 338
- },
- {
- .alloc_tbl_id = 266,
- .info_base_id = 138,
- .fifo_base_id = 202,
- },
-};
-
-/**
- * struct qcom_smd_edge - representing a remote processor
- * @dev: device for this edge
- * @of_node: of_node handle for information related to this edge
- * @edge_id: identifier of this edge
- * @remote_pid: identifier of remote processor
- * @irq: interrupt for signals on this edge
- * @ipc_regmap: regmap handle holding the outgoing ipc register
- * @ipc_offset: offset within @ipc_regmap of the register for ipc
- * @ipc_bit: bit in the register at @ipc_offset of @ipc_regmap
- * @channels: list of all channels detected on this edge
- * @channels_lock: guard for modifications of @channels
- * @allocated: array of bitmaps representing already allocated channels
- * @smem_available: last available amount of smem triggering a channel scan
- * @scan_work: work item for discovering new channels
- * @state_work: work item for edge state changes
- */
-struct qcom_smd_edge {
- struct device dev;
-
- struct device_node *of_node;
- unsigned edge_id;
- unsigned remote_pid;
-
- int irq;
-
- struct regmap *ipc_regmap;
- int ipc_offset;
- int ipc_bit;
-
- struct list_head channels;
- spinlock_t channels_lock;
-
- DECLARE_BITMAP(allocated[SMD_ALLOC_TBL_COUNT], SMD_ALLOC_TBL_SIZE);
-
- unsigned smem_available;
-
- wait_queue_head_t new_channel_event;
-
- struct work_struct scan_work;
- struct work_struct state_work;
-};
-
-#define to_smd_edge(d) container_of(d, struct qcom_smd_edge, dev)
-
-/*
- * SMD channel states.
- */
-enum smd_channel_state {
- SMD_CHANNEL_CLOSED,
- SMD_CHANNEL_OPENING,
- SMD_CHANNEL_OPENED,
- SMD_CHANNEL_FLUSHING,
- SMD_CHANNEL_CLOSING,
- SMD_CHANNEL_RESET,
- SMD_CHANNEL_RESET_OPENING
-};
-
-/**
- * struct qcom_smd_channel - smd channel struct
- * @edge: qcom_smd_edge this channel is living on
- * @qsdev: reference to a associated smd client device
- * @name: name of the channel
- * @state: local state of the channel
- * @remote_state: remote state of the channel
- * @info: byte aligned outgoing/incoming channel info
- * @info_word: word aligned outgoing/incoming channel info
- * @tx_lock: lock to make writes to the channel mutually exclusive
- * @fblockread_event: wakeup event tied to tx fBLOCKREADINTR
- * @tx_fifo: pointer to the outgoing ring buffer
- * @rx_fifo: pointer to the incoming ring buffer
- * @fifo_size: size of each ring buffer
- * @bounce_buffer: bounce buffer for reading wrapped packets
- * @cb: callback function registered for this channel
- * @recv_lock: guard for rx info modifications and cb pointer
- * @pkt_size: size of the currently handled packet
- * @list: lite entry for @channels in qcom_smd_edge
- */
-struct qcom_smd_channel {
- struct qcom_smd_edge *edge;
-
- struct qcom_smd_device *qsdev;
-
- char *name;
- enum smd_channel_state state;
- enum smd_channel_state remote_state;
-
- struct smd_channel_info_pair *info;
- struct smd_channel_info_word_pair *info_word;
-
- struct mutex tx_lock;
- wait_queue_head_t fblockread_event;
-
- void *tx_fifo;
- void *rx_fifo;
- int fifo_size;
-
- void *bounce_buffer;
- qcom_smd_cb_t cb;
-
- spinlock_t recv_lock;
-
- int pkt_size;
-
- void *drvdata;
-
- struct list_head list;
-};
-
-/*
- * Format of the smd_info smem items, for byte aligned channels.
- */
-struct smd_channel_info {
- __le32 state;
- u8 fDSR;
- u8 fCTS;
- u8 fCD;
- u8 fRI;
- u8 fHEAD;
- u8 fTAIL;
- u8 fSTATE;
- u8 fBLOCKREADINTR;
- __le32 tail;
- __le32 head;
-};
-
-struct smd_channel_info_pair {
- struct smd_channel_info tx;
- struct smd_channel_info rx;
-};
-
-/*
- * Format of the smd_info smem items, for word aligned channels.
- */
-struct smd_channel_info_word {
- __le32 state;
- __le32 fDSR;
- __le32 fCTS;
- __le32 fCD;
- __le32 fRI;
- __le32 fHEAD;
- __le32 fTAIL;
- __le32 fSTATE;
- __le32 fBLOCKREADINTR;
- __le32 tail;
- __le32 head;
-};
-
-struct smd_channel_info_word_pair {
- struct smd_channel_info_word tx;
- struct smd_channel_info_word rx;
-};
-
-#define GET_RX_CHANNEL_FLAG(channel, param) \
- ({ \
- BUILD_BUG_ON(sizeof(channel->info->rx.param) != sizeof(u8)); \
- channel->info_word ? \
- le32_to_cpu(channel->info_word->rx.param) : \
- channel->info->rx.param; \
- })
-
-#define GET_RX_CHANNEL_INFO(channel, param) \
- ({ \
- BUILD_BUG_ON(sizeof(channel->info->rx.param) != sizeof(u32)); \
- le32_to_cpu(channel->info_word ? \
- channel->info_word->rx.param : \
- channel->info->rx.param); \
- })
-
-#define SET_RX_CHANNEL_FLAG(channel, param, value) \
- ({ \
- BUILD_BUG_ON(sizeof(channel->info->rx.param) != sizeof(u8)); \
- if (channel->info_word) \
- channel->info_word->rx.param = cpu_to_le32(value); \
- else \
- channel->info->rx.param = value; \
- })
-
-#define SET_RX_CHANNEL_INFO(channel, param, value) \
- ({ \
- BUILD_BUG_ON(sizeof(channel->info->rx.param) != sizeof(u32)); \
- if (channel->info_word) \
- channel->info_word->rx.param = cpu_to_le32(value); \
- else \
- channel->info->rx.param = cpu_to_le32(value); \
- })
-
-#define GET_TX_CHANNEL_FLAG(channel, param) \
- ({ \
- BUILD_BUG_ON(sizeof(channel->info->tx.param) != sizeof(u8)); \
- channel->info_word ? \
- le32_to_cpu(channel->info_word->tx.param) : \
- channel->info->tx.param; \
- })
-
-#define GET_TX_CHANNEL_INFO(channel, param) \
- ({ \
- BUILD_BUG_ON(sizeof(channel->info->tx.param) != sizeof(u32)); \
- le32_to_cpu(channel->info_word ? \
- channel->info_word->tx.param : \
- channel->info->tx.param); \
- })
-
-#define SET_TX_CHANNEL_FLAG(channel, param, value) \
- ({ \
- BUILD_BUG_ON(sizeof(channel->info->tx.param) != sizeof(u8)); \
- if (channel->info_word) \
- channel->info_word->tx.param = cpu_to_le32(value); \
- else \
- channel->info->tx.param = value; \
- })
-
-#define SET_TX_CHANNEL_INFO(channel, param, value) \
- ({ \
- BUILD_BUG_ON(sizeof(channel->info->tx.param) != sizeof(u32)); \
- if (channel->info_word) \
- channel->info_word->tx.param = cpu_to_le32(value); \
- else \
- channel->info->tx.param = cpu_to_le32(value); \
- })
-
-/**
- * struct qcom_smd_alloc_entry - channel allocation entry
- * @name: channel name
- * @cid: channel index
- * @flags: channel flags and edge id
- * @ref_count: reference count of the channel
- */
-struct qcom_smd_alloc_entry {
- u8 name[20];
- __le32 cid;
- __le32 flags;
- __le32 ref_count;
-} __packed;
-
-#define SMD_CHANNEL_FLAGS_EDGE_MASK 0xff
-#define SMD_CHANNEL_FLAGS_STREAM BIT(8)
-#define SMD_CHANNEL_FLAGS_PACKET BIT(9)
-
-/*
- * Each smd packet contains a 20 byte header, with the first 4 being the length
- * of the packet.
- */
-#define SMD_PACKET_HEADER_LEN 20
-
-/*
- * Signal the remote processor associated with 'channel'.
- */
-static void qcom_smd_signal_channel(struct qcom_smd_channel *channel)
-{
- struct qcom_smd_edge *edge = channel->edge;
-
- regmap_write(edge->ipc_regmap, edge->ipc_offset, BIT(edge->ipc_bit));
-}
-
-/*
- * Initialize the tx channel info
- */
-static void qcom_smd_channel_reset(struct qcom_smd_channel *channel)
-{
- SET_TX_CHANNEL_INFO(channel, state, SMD_CHANNEL_CLOSED);
- SET_TX_CHANNEL_FLAG(channel, fDSR, 0);
- SET_TX_CHANNEL_FLAG(channel, fCTS, 0);
- SET_TX_CHANNEL_FLAG(channel, fCD, 0);
- SET_TX_CHANNEL_FLAG(channel, fRI, 0);
- SET_TX_CHANNEL_FLAG(channel, fHEAD, 0);
- SET_TX_CHANNEL_FLAG(channel, fTAIL, 0);
- SET_TX_CHANNEL_FLAG(channel, fSTATE, 1);
- SET_TX_CHANNEL_FLAG(channel, fBLOCKREADINTR, 1);
- SET_TX_CHANNEL_INFO(channel, head, 0);
- SET_RX_CHANNEL_INFO(channel, tail, 0);
-
- qcom_smd_signal_channel(channel);
-
- channel->state = SMD_CHANNEL_CLOSED;
- channel->pkt_size = 0;
-}
-
-/*
- * Set the callback for a channel, with appropriate locking
- */
-static void qcom_smd_channel_set_callback(struct qcom_smd_channel *channel,
- qcom_smd_cb_t cb)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&channel->recv_lock, flags);
- channel->cb = cb;
- spin_unlock_irqrestore(&channel->recv_lock, flags);
-};
-
-/*
- * Calculate the amount of data available in the rx fifo
- */
-static size_t qcom_smd_channel_get_rx_avail(struct qcom_smd_channel *channel)
-{
- unsigned head;
- unsigned tail;
-
- head = GET_RX_CHANNEL_INFO(channel, head);
- tail = GET_RX_CHANNEL_INFO(channel, tail);
-
- return (head - tail) & (channel->fifo_size - 1);
-}
-
-/*
- * Set tx channel state and inform the remote processor
- */
-static void qcom_smd_channel_set_state(struct qcom_smd_channel *channel,
- int state)
-{
- struct qcom_smd_edge *edge = channel->edge;
- bool is_open = state == SMD_CHANNEL_OPENED;
-
- if (channel->state == state)
- return;
-
- dev_dbg(&edge->dev, "set_state(%s, %d)\n", channel->name, state);
-
- SET_TX_CHANNEL_FLAG(channel, fDSR, is_open);
- SET_TX_CHANNEL_FLAG(channel, fCTS, is_open);
- SET_TX_CHANNEL_FLAG(channel, fCD, is_open);
-
- SET_TX_CHANNEL_INFO(channel, state, state);
- SET_TX_CHANNEL_FLAG(channel, fSTATE, 1);
-
- channel->state = state;
- qcom_smd_signal_channel(channel);
-}
-
-/*
- * Copy count bytes of data using 32bit accesses, if that's required.
- */
-static void smd_copy_to_fifo(void __iomem *dst,
- const void *src,
- size_t count,
- bool word_aligned)
-{
- if (word_aligned) {
- __iowrite32_copy(dst, src, count / sizeof(u32));
- } else {
- memcpy_toio(dst, src, count);
- }
-}
-
-/*
- * Copy count bytes of data using 32bit accesses, if that is required.
- */
-static void smd_copy_from_fifo(void *dst,
- const void __iomem *src,
- size_t count,
- bool word_aligned)
-{
- if (word_aligned) {
- __ioread32_copy(dst, src, count / sizeof(u32));
- } else {
- memcpy_fromio(dst, src, count);
- }
-}
-
-/*
- * Read count bytes of data from the rx fifo into buf, but don't advance the
- * tail.
- */
-static size_t qcom_smd_channel_peek(struct qcom_smd_channel *channel,
- void *buf, size_t count)
-{
- bool word_aligned;
- unsigned tail;
- size_t len;
-
- word_aligned = channel->info_word;
- tail = GET_RX_CHANNEL_INFO(channel, tail);
-
- len = min_t(size_t, count, channel->fifo_size - tail);
- if (len) {
- smd_copy_from_fifo(buf,
- channel->rx_fifo + tail,
- len,
- word_aligned);
- }
-
- if (len != count) {
- smd_copy_from_fifo(buf + len,
- channel->rx_fifo,
- count - len,
- word_aligned);
- }
-
- return count;
-}
-
-/*
- * Advance the rx tail by count bytes.
- */
-static void qcom_smd_channel_advance(struct qcom_smd_channel *channel,
- size_t count)
-{
- unsigned tail;
-
- tail = GET_RX_CHANNEL_INFO(channel, tail);
- tail += count;
- tail &= (channel->fifo_size - 1);
- SET_RX_CHANNEL_INFO(channel, tail, tail);
-}
-
-/*
- * Read out a single packet from the rx fifo and deliver it to the device
- */
-static int qcom_smd_channel_recv_single(struct qcom_smd_channel *channel)
-{
- unsigned tail;
- size_t len;
- void *ptr;
- int ret;
-
- if (!channel->cb)
- return 0;
-
- tail = GET_RX_CHANNEL_INFO(channel, tail);
-
- /* Use bounce buffer if the data wraps */
- if (tail + channel->pkt_size >= channel->fifo_size) {
- ptr = channel->bounce_buffer;
- len = qcom_smd_channel_peek(channel, ptr, channel->pkt_size);
- } else {
- ptr = channel->rx_fifo + tail;
- len = channel->pkt_size;
- }
-
- ret = channel->cb(channel, ptr, len);
- if (ret < 0)
- return ret;
-
- /* Only forward the tail if the client consumed the data */
- qcom_smd_channel_advance(channel, len);
-
- channel->pkt_size = 0;
-
- return 0;
-}
-
-/*
- * Per channel interrupt handling
- */
-static bool qcom_smd_channel_intr(struct qcom_smd_channel *channel)
-{
- bool need_state_scan = false;
- int remote_state;
- __le32 pktlen;
- int avail;
- int ret;
-
- /* Handle state changes */
- remote_state = GET_RX_CHANNEL_INFO(channel, state);
- if (remote_state != channel->remote_state) {
- channel->remote_state = remote_state;
- need_state_scan = true;
- }
- /* Indicate that we have seen any state change */
- SET_RX_CHANNEL_FLAG(channel, fSTATE, 0);
-
- /* Signal waiting qcom_smd_send() about the interrupt */
- if (!GET_TX_CHANNEL_FLAG(channel, fBLOCKREADINTR))
- wake_up_interruptible(&channel->fblockread_event);
-
- /* Don't consume any data until we've opened the channel */
- if (channel->state != SMD_CHANNEL_OPENED)
- goto out;
-
- /* Indicate that we've seen the new data */
- SET_RX_CHANNEL_FLAG(channel, fHEAD, 0);
-
- /* Consume data */
- for (;;) {
- avail = qcom_smd_channel_get_rx_avail(channel);
-
- if (!channel->pkt_size && avail >= SMD_PACKET_HEADER_LEN) {
- qcom_smd_channel_peek(channel, &pktlen, sizeof(pktlen));
- qcom_smd_channel_advance(channel, SMD_PACKET_HEADER_LEN);
- channel->pkt_size = le32_to_cpu(pktlen);
- } else if (channel->pkt_size && avail >= channel->pkt_size) {
- ret = qcom_smd_channel_recv_single(channel);
- if (ret)
- break;
- } else {
- break;
- }
- }
-
- /* Indicate that we have seen and updated tail */
- SET_RX_CHANNEL_FLAG(channel, fTAIL, 1);
-
- /* Signal the remote that we've consumed the data (if requested) */
- if (!GET_RX_CHANNEL_FLAG(channel, fBLOCKREADINTR)) {
- /* Ensure ordering of channel info updates */
- wmb();
-
- qcom_smd_signal_channel(channel);
- }
-
-out:
- return need_state_scan;
-}
-
-/*
- * The edge interrupts are triggered by the remote processor on state changes,
- * channel info updates or when new channels are created.
- */
-static irqreturn_t qcom_smd_edge_intr(int irq, void *data)
-{
- struct qcom_smd_edge *edge = data;
- struct qcom_smd_channel *channel;
- unsigned available;
- bool kick_scanner = false;
- bool kick_state = false;
-
- /*
- * Handle state changes or data on each of the channels on this edge
- */
- spin_lock(&edge->channels_lock);
- list_for_each_entry(channel, &edge->channels, list) {
- spin_lock(&channel->recv_lock);
- kick_state |= qcom_smd_channel_intr(channel);
- spin_unlock(&channel->recv_lock);
- }
- spin_unlock(&edge->channels_lock);
-
- /*
- * Creating a new channel requires allocating an smem entry, so we only
- * have to scan if the amount of available space in smem have changed
- * since last scan.
- */
- available = qcom_smem_get_free_space(edge->remote_pid);
- if (available != edge->smem_available) {
- edge->smem_available = available;
- kick_scanner = true;
- }
-
- if (kick_scanner)
- schedule_work(&edge->scan_work);
- if (kick_state)
- schedule_work(&edge->state_work);
-
- return IRQ_HANDLED;
-}
-
-/*
- * Delivers any outstanding packets in the rx fifo, can be used after probe of
- * the clients to deliver any packets that wasn't delivered before the client
- * was setup.
- */
-static void qcom_smd_channel_resume(struct qcom_smd_channel *channel)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&channel->recv_lock, flags);
- qcom_smd_channel_intr(channel);
- spin_unlock_irqrestore(&channel->recv_lock, flags);
-}
-
-/*
- * Calculate how much space is available in the tx fifo.
- */
-static size_t qcom_smd_get_tx_avail(struct qcom_smd_channel *channel)
-{
- unsigned head;
- unsigned tail;
- unsigned mask = channel->fifo_size - 1;
-
- head = GET_TX_CHANNEL_INFO(channel, head);
- tail = GET_TX_CHANNEL_INFO(channel, tail);
-
- return mask - ((head - tail) & mask);
-}
-
-/*
- * Write count bytes of data into channel, possibly wrapping in the ring buffer
- */
-static int qcom_smd_write_fifo(struct qcom_smd_channel *channel,
- const void *data,
- size_t count)
-{
- bool word_aligned;
- unsigned head;
- size_t len;
-
- word_aligned = channel->info_word;
- head = GET_TX_CHANNEL_INFO(channel, head);
-
- len = min_t(size_t, count, channel->fifo_size - head);
- if (len) {
- smd_copy_to_fifo(channel->tx_fifo + head,
- data,
- len,
- word_aligned);
- }
-
- if (len != count) {
- smd_copy_to_fifo(channel->tx_fifo,
- data + len,
- count - len,
- word_aligned);
- }
-
- head += count;
- head &= (channel->fifo_size - 1);
- SET_TX_CHANNEL_INFO(channel, head, head);
-
- return count;
-}
-
-/**
- * qcom_smd_send - write data to smd channel
- * @channel: channel handle
- * @data: buffer of data to write
- * @len: number of bytes to write
- *
- * This is a blocking write of len bytes into the channel's tx ring buffer and
- * signal the remote end. It will sleep until there is enough space available
- * in the tx buffer, utilizing the fBLOCKREADINTR signaling mechanism to avoid
- * polling.
- */
-int qcom_smd_send(struct qcom_smd_channel *channel, const void *data, int len)
-{
- __le32 hdr[5] = { cpu_to_le32(len), };
- int tlen = sizeof(hdr) + len;
- int ret;
-
- /* Word aligned channels only accept word size aligned data */
- if (channel->info_word && len % 4)
- return -EINVAL;
-
- /* Reject packets that are too big */
- if (tlen >= channel->fifo_size)
- return -EINVAL;
-
- ret = mutex_lock_interruptible(&channel->tx_lock);
- if (ret)
- return ret;
-
- while (qcom_smd_get_tx_avail(channel) < tlen) {
- if (channel->state != SMD_CHANNEL_OPENED) {
- ret = -EPIPE;
- goto out;
- }
-
- SET_TX_CHANNEL_FLAG(channel, fBLOCKREADINTR, 0);
-
- ret = wait_event_interruptible(channel->fblockread_event,
- qcom_smd_get_tx_avail(channel) >= tlen ||
- channel->state != SMD_CHANNEL_OPENED);
- if (ret)
- goto out;
-
- SET_TX_CHANNEL_FLAG(channel, fBLOCKREADINTR, 1);
- }
-
- SET_TX_CHANNEL_FLAG(channel, fTAIL, 0);
-
- qcom_smd_write_fifo(channel, hdr, sizeof(hdr));
- qcom_smd_write_fifo(channel, data, len);
-
- SET_TX_CHANNEL_FLAG(channel, fHEAD, 1);
-
- /* Ensure ordering of channel info updates */
- wmb();
-
- qcom_smd_signal_channel(channel);
-
-out:
- mutex_unlock(&channel->tx_lock);
-
- return ret;
-}
-EXPORT_SYMBOL(qcom_smd_send);
-
-static struct qcom_smd_device *to_smd_device(struct device *dev)
-{
- return container_of(dev, struct qcom_smd_device, dev);
-}
-
-static struct qcom_smd_driver *to_smd_driver(struct device *dev)
-{
- struct qcom_smd_device *qsdev = to_smd_device(dev);
-
- return container_of(qsdev->dev.driver, struct qcom_smd_driver, driver);
-}
-
-static int qcom_smd_dev_match(struct device *dev, struct device_driver *drv)
-{
- struct qcom_smd_device *qsdev = to_smd_device(dev);
- struct qcom_smd_driver *qsdrv = container_of(drv, struct qcom_smd_driver, driver);
- const struct qcom_smd_id *match = qsdrv->smd_match_table;
- const char *name = qsdev->channel->name;
-
- if (match) {
- while (match->name[0]) {
- if (!strcmp(match->name, name))
- return 1;
- match++;
- }
- }
-
- return of_driver_match_device(dev, drv);
-}
-
-/*
- * Helper for opening a channel
- */
-static int qcom_smd_channel_open(struct qcom_smd_channel *channel,
- qcom_smd_cb_t cb)
-{
- size_t bb_size;
-
- /*
- * Packets are maximum 4k, but reduce if the fifo is smaller
- */
- bb_size = min(channel->fifo_size, SZ_4K);
- channel->bounce_buffer = kmalloc(bb_size, GFP_KERNEL);
- if (!channel->bounce_buffer)
- return -ENOMEM;
-
- qcom_smd_channel_set_callback(channel, cb);
- qcom_smd_channel_set_state(channel, SMD_CHANNEL_OPENING);
- qcom_smd_channel_set_state(channel, SMD_CHANNEL_OPENED);
-
- return 0;
-}
-
-/*
- * Helper for closing and resetting a channel
- */
-static void qcom_smd_channel_close(struct qcom_smd_channel *channel)
-{
- qcom_smd_channel_set_callback(channel, NULL);
-
- kfree(channel->bounce_buffer);
- channel->bounce_buffer = NULL;
-
- qcom_smd_channel_set_state(channel, SMD_CHANNEL_CLOSED);
- qcom_smd_channel_reset(channel);
-}
-
-/*
- * Probe the smd client.
- *
- * The remote side have indicated that it want the channel to be opened, so
- * complete the state handshake and probe our client driver.
- */
-static int qcom_smd_dev_probe(struct device *dev)
-{
- struct qcom_smd_device *qsdev = to_smd_device(dev);
- struct qcom_smd_driver *qsdrv = to_smd_driver(dev);
- struct qcom_smd_channel *channel = qsdev->channel;
- int ret;
-
- ret = qcom_smd_channel_open(channel, qsdrv->callback);
- if (ret)
- return ret;
-
- ret = qsdrv->probe(qsdev);
- if (ret)
- goto err;
-
- qcom_smd_channel_resume(channel);
-
- return 0;
-
-err:
- dev_err(&qsdev->dev, "probe failed\n");
-
- qcom_smd_channel_close(channel);
- return ret;
-}
-
-/*
- * Remove the smd client.
- *
- * The channel is going away, for some reason, so remove the smd client and
- * reset the channel state.
- */
-static int qcom_smd_dev_remove(struct device *dev)
-{
- struct qcom_smd_device *qsdev = to_smd_device(dev);
- struct qcom_smd_driver *qsdrv = to_smd_driver(dev);
- struct qcom_smd_channel *channel = qsdev->channel;
-
- qcom_smd_channel_set_state(channel, SMD_CHANNEL_CLOSING);
-
- /*
- * Make sure we don't race with the code receiving data.
- */
- qcom_smd_channel_set_callback(channel, NULL);
-
- /* Wake up any sleepers in qcom_smd_send() */
- wake_up_interruptible(&channel->fblockread_event);
-
- /*
- * We expect that the client might block in remove() waiting for any
- * outstanding calls to qcom_smd_send() to wake up and finish.
- */
- if (qsdrv->remove)
- qsdrv->remove(qsdev);
-
- /* The client is now gone, close the primary channel */
- qcom_smd_channel_close(channel);
- channel->qsdev = NULL;
-
- return 0;
-}
-
-static struct bus_type qcom_smd_bus = {
- .name = "qcom_smd",
- .match = qcom_smd_dev_match,
- .probe = qcom_smd_dev_probe,
- .remove = qcom_smd_dev_remove,
-};
-
-/*
- * Release function for the qcom_smd_device object.
- */
-static void qcom_smd_release_device(struct device *dev)
-{
- struct qcom_smd_device *qsdev = to_smd_device(dev);
-
- kfree(qsdev);
-}
-
-/*
- * Finds the device_node for the smd child interested in this channel.
- */
-static struct device_node *qcom_smd_match_channel(struct device_node *edge_node,
- const char *channel)
-{
- struct device_node *child;
- const char *name;
- const char *key;
- int ret;
-
- for_each_available_child_of_node(edge_node, child) {
- key = "qcom,smd-channels";
- ret = of_property_read_string(child, key, &name);
- if (ret)
- continue;
-
- if (strcmp(name, channel) == 0)
- return child;
- }
-
- return NULL;
-}
-
-/*
- * Create a smd client device for channel that is being opened.
- */
-static int qcom_smd_create_device(struct qcom_smd_channel *channel)
-{
- struct qcom_smd_device *qsdev;
- struct qcom_smd_edge *edge = channel->edge;
- struct device_node *node;
- int ret;
-
- if (channel->qsdev)
- return -EEXIST;
-
- dev_dbg(&edge->dev, "registering '%s'\n", channel->name);
-
- qsdev = kzalloc(sizeof(*qsdev), GFP_KERNEL);
- if (!qsdev)
- return -ENOMEM;
-
- node = qcom_smd_match_channel(edge->of_node, channel->name);
- dev_set_name(&qsdev->dev, "%s.%s",
- edge->of_node->name,
- node ? node->name : channel->name);
-
- qsdev->dev.parent = &edge->dev;
- qsdev->dev.bus = &qcom_smd_bus;
- qsdev->dev.release = qcom_smd_release_device;
- qsdev->dev.of_node = node;
-
- qsdev->channel = channel;
-
- channel->qsdev = qsdev;
-
- ret = device_register(&qsdev->dev);
- if (ret) {
- dev_err(&edge->dev, "device_register failed: %d\n", ret);
- put_device(&qsdev->dev);
- }
-
- return ret;
-}
-
-/*
- * Destroy a smd client device for a channel that's going away.
- */
-static void qcom_smd_destroy_device(struct qcom_smd_channel *channel)
-{
- struct device *dev;
-
- BUG_ON(!channel->qsdev);
-
- dev = &channel->qsdev->dev;
-
- device_unregister(dev);
- of_node_put(dev->of_node);
- put_device(dev);
-}
-
-/**
- * qcom_smd_driver_register - register a smd driver
- * @qsdrv: qcom_smd_driver struct
- */
-int qcom_smd_driver_register(struct qcom_smd_driver *qsdrv)
-{
- qsdrv->driver.bus = &qcom_smd_bus;
- return driver_register(&qsdrv->driver);
-}
-EXPORT_SYMBOL(qcom_smd_driver_register);
-
-void *qcom_smd_get_drvdata(struct qcom_smd_channel *channel)
-{
- return channel->drvdata;
-}
-EXPORT_SYMBOL(qcom_smd_get_drvdata);
-
-void qcom_smd_set_drvdata(struct qcom_smd_channel *channel, void *data)
-{
- channel->drvdata = data;
-}
-EXPORT_SYMBOL(qcom_smd_set_drvdata);
-
-/**
- * qcom_smd_driver_unregister - unregister a smd driver
- * @qsdrv: qcom_smd_driver struct
- */
-void qcom_smd_driver_unregister(struct qcom_smd_driver *qsdrv)
-{
- driver_unregister(&qsdrv->driver);
-}
-EXPORT_SYMBOL(qcom_smd_driver_unregister);
-
-static struct qcom_smd_channel *
-qcom_smd_find_channel(struct qcom_smd_edge *edge, const char *name)
-{
- struct qcom_smd_channel *channel;
- struct qcom_smd_channel *ret = NULL;
- unsigned long flags;
- unsigned state;
-
- spin_lock_irqsave(&edge->channels_lock, flags);
- list_for_each_entry(channel, &edge->channels, list) {
- if (strcmp(channel->name, name))
- continue;
-
- state = GET_RX_CHANNEL_INFO(channel, state);
- if (state != SMD_CHANNEL_OPENING &&
- state != SMD_CHANNEL_OPENED)
- continue;
-
- ret = channel;
- break;
- }
- spin_unlock_irqrestore(&edge->channels_lock, flags);
-
- return ret;
-}
-
-/**
- * qcom_smd_open_channel() - claim additional channels on the same edge
- * @sdev: smd_device handle
- * @name: channel name
- * @cb: callback method to use for incoming data
- *
- * Returns a channel handle on success, or -EPROBE_DEFER if the channel isn't
- * ready.
- *
- * Any channels returned must be closed with a call to qcom_smd_close_channel()
- */
-struct qcom_smd_channel *qcom_smd_open_channel(struct qcom_smd_channel *parent,
- const char *name,
- qcom_smd_cb_t cb)
-{
- struct qcom_smd_channel *channel;
- struct qcom_smd_device *sdev = parent->qsdev;
- struct qcom_smd_edge *edge = parent->edge;
- int ret;
-
- /* Wait up to HZ for the channel to appear */
- ret = wait_event_interruptible_timeout(edge->new_channel_event,
- (channel = qcom_smd_find_channel(edge, name)) != NULL,
- HZ);
- if (!ret)
- return ERR_PTR(-ETIMEDOUT);
-
- if (channel->state != SMD_CHANNEL_CLOSED) {
- dev_err(&sdev->dev, "channel %s is busy\n", channel->name);
- return ERR_PTR(-EBUSY);
- }
-
- channel->qsdev = sdev;
- ret = qcom_smd_channel_open(channel, cb);
- if (ret) {
- channel->qsdev = NULL;
- return ERR_PTR(ret);
- }
-
- return channel;
-}
-EXPORT_SYMBOL(qcom_smd_open_channel);
-
-/**
- * qcom_smd_close_channel() - close an additionally opened channel
- * @channel: channel handle, returned by qcom_smd_open_channel()
- */
-void qcom_smd_close_channel(struct qcom_smd_channel *channel)
-{
- qcom_smd_channel_close(channel);
- channel->qsdev = NULL;
-}
-EXPORT_SYMBOL(qcom_smd_close_channel);
-
-/*
- * Allocate the qcom_smd_channel object for a newly found smd channel,
- * retrieving and validating the smem items involved.
- */
-static struct qcom_smd_channel *qcom_smd_create_channel(struct qcom_smd_edge *edge,
- unsigned smem_info_item,
- unsigned smem_fifo_item,
- char *name)
-{
- struct qcom_smd_channel *channel;
- size_t fifo_size;
- size_t info_size;
- void *fifo_base;
- void *info;
- int ret;
-
- channel = devm_kzalloc(&edge->dev, sizeof(*channel), GFP_KERNEL);
- if (!channel)
- return ERR_PTR(-ENOMEM);
-
- channel->edge = edge;
- channel->name = devm_kstrdup(&edge->dev, name, GFP_KERNEL);
- if (!channel->name)
- return ERR_PTR(-ENOMEM);
-
- mutex_init(&channel->tx_lock);
- spin_lock_init(&channel->recv_lock);
- init_waitqueue_head(&channel->fblockread_event);
-
- info = qcom_smem_get(edge->remote_pid, smem_info_item, &info_size);
- if (IS_ERR(info)) {
- ret = PTR_ERR(info);
- goto free_name_and_channel;
- }
-
- /*
- * Use the size of the item to figure out which channel info struct to
- * use.
- */
- if (info_size == 2 * sizeof(struct smd_channel_info_word)) {
- channel->info_word = info;
- } else if (info_size == 2 * sizeof(struct smd_channel_info)) {
- channel->info = info;
- } else {
- dev_err(&edge->dev,
- "channel info of size %zu not supported\n", info_size);
- ret = -EINVAL;
- goto free_name_and_channel;
- }
-
- fifo_base = qcom_smem_get(edge->remote_pid, smem_fifo_item, &fifo_size);
- if (IS_ERR(fifo_base)) {
- ret = PTR_ERR(fifo_base);
- goto free_name_and_channel;
- }
-
- /* The channel consist of a rx and tx fifo of equal size */
- fifo_size /= 2;
-
- dev_dbg(&edge->dev, "new channel '%s' info-size: %zu fifo-size: %zu\n",
- name, info_size, fifo_size);
-
- channel->tx_fifo = fifo_base;
- channel->rx_fifo = fifo_base + fifo_size;
- channel->fifo_size = fifo_size;
-
- qcom_smd_channel_reset(channel);
-
- return channel;
-
-free_name_and_channel:
- devm_kfree(&edge->dev, channel->name);
- devm_kfree(&edge->dev, channel);
-
- return ERR_PTR(ret);
-}
-
-/*
- * Scans the allocation table for any newly allocated channels, calls
- * qcom_smd_create_channel() to create representations of these and add
- * them to the edge's list of channels.
- */
-static void qcom_channel_scan_worker(struct work_struct *work)
-{
- struct qcom_smd_edge *edge = container_of(work, struct qcom_smd_edge, scan_work);
- struct qcom_smd_alloc_entry *alloc_tbl;
- struct qcom_smd_alloc_entry *entry;
- struct qcom_smd_channel *channel;
- unsigned long flags;
- unsigned fifo_id;
- unsigned info_id;
- int tbl;
- int i;
- u32 eflags, cid;
-
- for (tbl = 0; tbl < SMD_ALLOC_TBL_COUNT; tbl++) {
- alloc_tbl = qcom_smem_get(edge->remote_pid,
- smem_items[tbl].alloc_tbl_id, NULL);
- if (IS_ERR(alloc_tbl))
- continue;
-
- for (i = 0; i < SMD_ALLOC_TBL_SIZE; i++) {
- entry = &alloc_tbl[i];
- eflags = le32_to_cpu(entry->flags);
- if (test_bit(i, edge->allocated[tbl]))
- continue;
-
- if (entry->ref_count == 0)
- continue;
-
- if (!entry->name[0])
- continue;
-
- if (!(eflags & SMD_CHANNEL_FLAGS_PACKET))
- continue;
-
- if ((eflags & SMD_CHANNEL_FLAGS_EDGE_MASK) != edge->edge_id)
- continue;
-
- cid = le32_to_cpu(entry->cid);
- info_id = smem_items[tbl].info_base_id + cid;
- fifo_id = smem_items[tbl].fifo_base_id + cid;
-
- channel = qcom_smd_create_channel(edge, info_id, fifo_id, entry->name);
- if (IS_ERR(channel))
- continue;
-
- spin_lock_irqsave(&edge->channels_lock, flags);
- list_add(&channel->list, &edge->channels);
- spin_unlock_irqrestore(&edge->channels_lock, flags);
-
- dev_dbg(&edge->dev, "new channel found: '%s'\n", channel->name);
- set_bit(i, edge->allocated[tbl]);
-
- wake_up_interruptible(&edge->new_channel_event);
- }
- }
-
- schedule_work(&edge->state_work);
-}
-
-/*
- * This per edge worker scans smem for any new channels and register these. It
- * then scans all registered channels for state changes that should be handled
- * by creating or destroying smd client devices for the registered channels.
- *
- * LOCKING: edge->channels_lock only needs to cover the list operations, as the
- * worker is killed before any channels are deallocated
- */
-static void qcom_channel_state_worker(struct work_struct *work)
-{
- struct qcom_smd_channel *channel;
- struct qcom_smd_edge *edge = container_of(work,
- struct qcom_smd_edge,
- state_work);
- unsigned remote_state;
- unsigned long flags;
-
- /*
- * Register a device for any closed channel where the remote processor
- * is showing interest in opening the channel.
- */
- spin_lock_irqsave(&edge->channels_lock, flags);
- list_for_each_entry(channel, &edge->channels, list) {
- if (channel->state != SMD_CHANNEL_CLOSED)
- continue;
-
- remote_state = GET_RX_CHANNEL_INFO(channel, state);
- if (remote_state != SMD_CHANNEL_OPENING &&
- remote_state != SMD_CHANNEL_OPENED)
- continue;
-
- spin_unlock_irqrestore(&edge->channels_lock, flags);
- qcom_smd_create_device(channel);
- spin_lock_irqsave(&edge->channels_lock, flags);
- }
-
- /*
- * Unregister the device for any channel that is opened where the
- * remote processor is closing the channel.
- */
- list_for_each_entry(channel, &edge->channels, list) {
- if (channel->state != SMD_CHANNEL_OPENING &&
- channel->state != SMD_CHANNEL_OPENED)
- continue;
-
- remote_state = GET_RX_CHANNEL_INFO(channel, state);
- if (remote_state == SMD_CHANNEL_OPENING ||
- remote_state == SMD_CHANNEL_OPENED)
- continue;
-
- spin_unlock_irqrestore(&edge->channels_lock, flags);
- qcom_smd_destroy_device(channel);
- spin_lock_irqsave(&edge->channels_lock, flags);
- }
- spin_unlock_irqrestore(&edge->channels_lock, flags);
-}
-
-/*
- * Parses an of_node describing an edge.
- */
-static int qcom_smd_parse_edge(struct device *dev,
- struct device_node *node,
- struct qcom_smd_edge *edge)
-{
- struct device_node *syscon_np;
- const char *key;
- int irq;
- int ret;
-
- INIT_LIST_HEAD(&edge->channels);
- spin_lock_init(&edge->channels_lock);
-
- INIT_WORK(&edge->scan_work, qcom_channel_scan_worker);
- INIT_WORK(&edge->state_work, qcom_channel_state_worker);
-
- edge->of_node = of_node_get(node);
-
- key = "qcom,smd-edge";
- ret = of_property_read_u32(node, key, &edge->edge_id);
- if (ret) {
- dev_err(dev, "edge missing %s property\n", key);
- return -EINVAL;
- }
-
- edge->remote_pid = QCOM_SMEM_HOST_ANY;
- key = "qcom,remote-pid";
- of_property_read_u32(node, key, &edge->remote_pid);
-
- syscon_np = of_parse_phandle(node, "qcom,ipc", 0);
- if (!syscon_np) {
- dev_err(dev, "no qcom,ipc node\n");
- return -ENODEV;
- }
-
- edge->ipc_regmap = syscon_node_to_regmap(syscon_np);
- if (IS_ERR(edge->ipc_regmap))
- return PTR_ERR(edge->ipc_regmap);
-
- key = "qcom,ipc";
- ret = of_property_read_u32_index(node, key, 1, &edge->ipc_offset);
- if (ret < 0) {
- dev_err(dev, "no offset in %s\n", key);
- return -EINVAL;
- }
-
- ret = of_property_read_u32_index(node, key, 2, &edge->ipc_bit);
- if (ret < 0) {
- dev_err(dev, "no bit in %s\n", key);
- return -EINVAL;
- }
-
- irq = irq_of_parse_and_map(node, 0);
- if (irq < 0) {
- dev_err(dev, "required smd interrupt missing\n");
- return -EINVAL;
- }
-
- ret = devm_request_irq(dev, irq,
- qcom_smd_edge_intr, IRQF_TRIGGER_RISING,
- node->name, edge);
- if (ret) {
- dev_err(dev, "failed to request smd irq\n");
- return ret;
- }
-
- edge->irq = irq;
-
- return 0;
-}
-
-/*
- * Release function for an edge.
- * Reset the state of each associated channel and free the edge context.
- */
-static void qcom_smd_edge_release(struct device *dev)
-{
- struct qcom_smd_channel *channel;
- struct qcom_smd_edge *edge = to_smd_edge(dev);
-
- list_for_each_entry(channel, &edge->channels, list) {
- SET_RX_CHANNEL_INFO(channel, state, SMD_CHANNEL_CLOSED);
- SET_RX_CHANNEL_INFO(channel, head, 0);
- SET_RX_CHANNEL_INFO(channel, tail, 0);
- }
-
- kfree(edge);
-}
-
-/**
- * qcom_smd_register_edge() - register an edge based on an device_node
- * @parent: parent device for the edge
- * @node: device_node describing the edge
- *
- * Returns an edge reference, or negative ERR_PTR() on failure.
- */
-struct qcom_smd_edge *qcom_smd_register_edge(struct device *parent,
- struct device_node *node)
-{
- struct qcom_smd_edge *edge;
- int ret;
-
- edge = kzalloc(sizeof(*edge), GFP_KERNEL);
- if (!edge)
- return ERR_PTR(-ENOMEM);
-
- init_waitqueue_head(&edge->new_channel_event);
-
- edge->dev.parent = parent;
- edge->dev.release = qcom_smd_edge_release;
- dev_set_name(&edge->dev, "%s:%s", dev_name(parent), node->name);
- ret = device_register(&edge->dev);
- if (ret) {
- pr_err("failed to register smd edge\n");
- return ERR_PTR(ret);
- }
-
- ret = qcom_smd_parse_edge(&edge->dev, node, edge);
- if (ret) {
- dev_err(&edge->dev, "failed to parse smd edge\n");
- goto unregister_dev;
- }
-
- schedule_work(&edge->scan_work);
-
- return edge;
-
-unregister_dev:
- put_device(&edge->dev);
- return ERR_PTR(ret);
-}
-EXPORT_SYMBOL(qcom_smd_register_edge);
-
-static int qcom_smd_remove_device(struct device *dev, void *data)
-{
- device_unregister(dev);
- of_node_put(dev->of_node);
- put_device(dev);
-
- return 0;
-}
-
-/**
- * qcom_smd_unregister_edge() - release an edge and its children
- * @edge: edge reference acquired from qcom_smd_register_edge
- */
-int qcom_smd_unregister_edge(struct qcom_smd_edge *edge)
-{
- int ret;
-
- disable_irq(edge->irq);
- cancel_work_sync(&edge->scan_work);
- cancel_work_sync(&edge->state_work);
-
- ret = device_for_each_child(&edge->dev, NULL, qcom_smd_remove_device);
- if (ret)
- dev_warn(&edge->dev, "can't remove smd device: %d\n", ret);
-
- device_unregister(&edge->dev);
-
- return 0;
-}
-EXPORT_SYMBOL(qcom_smd_unregister_edge);
-
-static int qcom_smd_probe(struct platform_device *pdev)
-{
- struct device_node *node;
- void *p;
-
- /* Wait for smem */
- p = qcom_smem_get(QCOM_SMEM_HOST_ANY, smem_items[0].alloc_tbl_id, NULL);
- if (PTR_ERR(p) == -EPROBE_DEFER)
- return PTR_ERR(p);
-
- for_each_available_child_of_node(pdev->dev.of_node, node)
- qcom_smd_register_edge(&pdev->dev, node);
-
- return 0;
-}
-
-static int qcom_smd_remove_edge(struct device *dev, void *data)
-{
- struct qcom_smd_edge *edge = to_smd_edge(dev);
-
- return qcom_smd_unregister_edge(edge);
-}
-
-/*
- * Shut down all smd clients by making sure that each edge stops processing
- * events and scanning for new channels, then call destroy on the devices.
- */
-static int qcom_smd_remove(struct platform_device *pdev)
-{
- int ret;
-
- ret = device_for_each_child(&pdev->dev, NULL, qcom_smd_remove_edge);
- if (ret)
- dev_warn(&pdev->dev, "can't remove smd device: %d\n", ret);
-
- return ret;
-}
-
-static const struct of_device_id qcom_smd_of_match[] = {
- { .compatible = "qcom,smd" },
- {}
-};
-MODULE_DEVICE_TABLE(of, qcom_smd_of_match);
-
-static struct platform_driver qcom_smd_driver = {
- .probe = qcom_smd_probe,
- .remove = qcom_smd_remove,
- .driver = {
- .name = "qcom-smd",
- .of_match_table = qcom_smd_of_match,
- },
-};
-
-static int __init qcom_smd_init(void)
-{
- int ret;
-
- ret = bus_register(&qcom_smd_bus);
- if (ret) {
- pr_err("failed to register smd bus: %d\n", ret);
- return ret;
- }
-
- return platform_driver_register(&qcom_smd_driver);
-}
-postcore_initcall(qcom_smd_init);
-
-static void __exit qcom_smd_exit(void)
-{
- platform_driver_unregister(&qcom_smd_driver);
- bus_unregister(&qcom_smd_bus);
-}
-module_exit(qcom_smd_exit);
-
-MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>");
-MODULE_DESCRIPTION("Qualcomm Shared Memory Driver");
-MODULE_LICENSE("GPL v2");
diff --git a/include/linux/rpmsg/qcom_smd.h b/include/linux/rpmsg/qcom_smd.h
index 8ec8b6439b25..f27917e0a101 100644
--- a/include/linux/rpmsg/qcom_smd.h
+++ b/include/linux/rpmsg/qcom_smd.h
@@ -6,7 +6,7 @@
struct qcom_smd_edge;
-#if IS_ENABLED(CONFIG_RPMSG_QCOM_SMD) || IS_ENABLED(CONFIG_QCOM_SMD)
+#if IS_ENABLED(CONFIG_RPMSG_QCOM_SMD)
struct qcom_smd_edge *qcom_smd_register_edge(struct device *parent,
struct device_node *node);
diff --git a/include/linux/soc/qcom/smd.h b/include/linux/soc/qcom/smd.h
deleted file mode 100644
index f148e0ffbec7..000000000000
--- a/include/linux/soc/qcom/smd.h
+++ /dev/null
@@ -1,139 +0,0 @@
-#ifndef __QCOM_SMD_H__
-#define __QCOM_SMD_H__
-
-#include <linux/device.h>
-#include <linux/mod_devicetable.h>
-
-struct qcom_smd;
-struct qcom_smd_channel;
-struct qcom_smd_lookup;
-
-/**
- * struct qcom_smd_id - struct used for matching a smd device
- * @name: name of the channel
- */
-struct qcom_smd_id {
- char name[20];
-};
-
-/**
- * struct qcom_smd_device - smd device struct
- * @dev: the device struct
- * @channel: handle to the smd channel for this device
- */
-struct qcom_smd_device {
- struct device dev;
- struct qcom_smd_channel *channel;
-};
-
-typedef int (*qcom_smd_cb_t)(struct qcom_smd_channel *, const void *, size_t);
-
-/**
- * struct qcom_smd_driver - smd driver struct
- * @driver: underlying device driver
- * @smd_match_table: static channel match table
- * @probe: invoked when the smd channel is found
- * @remove: invoked when the smd channel is closed
- * @callback: invoked when an inbound message is received on the channel,
- * should return 0 on success or -EBUSY if the data cannot be
- * consumed at this time
- */
-struct qcom_smd_driver {
- struct device_driver driver;
- const struct qcom_smd_id *smd_match_table;
-
- int (*probe)(struct qcom_smd_device *dev);
- void (*remove)(struct qcom_smd_device *dev);
- qcom_smd_cb_t callback;
-};
-
-#if IS_ENABLED(CONFIG_QCOM_SMD)
-
-int qcom_smd_driver_register(struct qcom_smd_driver *drv);
-void qcom_smd_driver_unregister(struct qcom_smd_driver *drv);
-
-struct qcom_smd_channel *qcom_smd_open_channel(struct qcom_smd_channel *channel,
- const char *name,
- qcom_smd_cb_t cb);
-void qcom_smd_close_channel(struct qcom_smd_channel *channel);
-void *qcom_smd_get_drvdata(struct qcom_smd_channel *channel);
-void qcom_smd_set_drvdata(struct qcom_smd_channel *channel, void *data);
-int qcom_smd_send(struct qcom_smd_channel *channel, const void *data, int len);
-
-
-struct qcom_smd_edge *qcom_smd_register_edge(struct device *parent,
- struct device_node *node);
-int qcom_smd_unregister_edge(struct qcom_smd_edge *edge);
-
-#else
-
-static inline int qcom_smd_driver_register(struct qcom_smd_driver *drv)
-{
- return -ENXIO;
-}
-
-static inline void qcom_smd_driver_unregister(struct qcom_smd_driver *drv)
-{
- /* This shouldn't be possible */
- WARN_ON(1);
-}
-
-static inline struct qcom_smd_channel *
-qcom_smd_open_channel(struct qcom_smd_channel *channel,
- const char *name,
- qcom_smd_cb_t cb)
-{
- /* This shouldn't be possible */
- WARN_ON(1);
- return NULL;
-}
-
-static inline void qcom_smd_close_channel(struct qcom_smd_channel *channel)
-{
- /* This shouldn't be possible */
- WARN_ON(1);
-}
-
-static inline void *qcom_smd_get_drvdata(struct qcom_smd_channel *channel)
-{
- /* This shouldn't be possible */
- WARN_ON(1);
- return NULL;
-}
-
-static inline void qcom_smd_set_drvdata(struct qcom_smd_channel *channel, void *data)
-{
- /* This shouldn't be possible */
- WARN_ON(1);
-}
-
-static inline int qcom_smd_send(struct qcom_smd_channel *channel,
- const void *data, int len)
-{
- /* This shouldn't be possible */
- WARN_ON(1);
- return -ENXIO;
-}
-
-static inline struct qcom_smd_edge *
-qcom_smd_register_edge(struct device *parent,
- struct device_node *node)
-{
- return ERR_PTR(-ENXIO);
-}
-
-static inline int qcom_smd_unregister_edge(struct qcom_smd_edge *edge)
-{
- /* This shouldn't be possible */
- WARN_ON(1);
- return -ENXIO;
-}
-
-#endif
-
-#define module_qcom_smd_driver(__smd_driver) \
- module_driver(__smd_driver, qcom_smd_driver_register, \
- qcom_smd_driver_unregister)
-
-
-#endif
--
2.12.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 3/3] soc: qcom: smd-rpm: Add msm8996 compatibility
@ 2017-03-20 23:35 ` Bjorn Andersson
0 siblings, 0 replies; 24+ messages in thread
From: Bjorn Andersson @ 2017-03-20 23:35 UTC (permalink / raw)
To: Andy Gross
Cc: Marcel Holtmann, Gustavo Padovan, Johan Hedberg,
Eugene Krasnikov, Kalle Valo, David Brown, David S. Miller,
Arnd Bergmann, linux-bluetooth, linux-kernel, wcn36xx,
linux-wireless, netdev, linux-arm-msm, linux-soc
With the RPM driver transitioned to RPMSG we can reuse the SMD-RPM
driver ontop of GLINK for 8996, without any modifications.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
drivers/soc/qcom/smd-rpm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c
index 0dcf1bf33126..c2346752b3ea 100644
--- a/drivers/soc/qcom/smd-rpm.c
+++ b/drivers/soc/qcom/smd-rpm.c
@@ -225,6 +225,7 @@ static const struct of_device_id qcom_smd_rpm_of_match[] = {
{ .compatible = "qcom,rpm-apq8084" },
{ .compatible = "qcom,rpm-msm8916" },
{ .compatible = "qcom,rpm-msm8974" },
+ { .compatible = "qcom,rpm-msm8996" },
{}
};
MODULE_DEVICE_TABLE(of, qcom_smd_rpm_of_match);
--
2.12.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 3/3] soc: qcom: smd-rpm: Add msm8996 compatibility
@ 2017-03-20 23:35 ` Bjorn Andersson
0 siblings, 0 replies; 24+ messages in thread
From: Bjorn Andersson @ 2017-03-20 23:35 UTC (permalink / raw)
To: Andy Gross
Cc: Marcel Holtmann, Gustavo Padovan, Johan Hedberg,
Eugene Krasnikov, Kalle Valo, David Brown, David S. Miller,
Arnd Bergmann, linux-bluetooth-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
wcn36xx-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-wireless-u79uwXL29TY76Z2rM5mHXA,
netdev-u79uwXL29TY76Z2rM5mHXA,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-soc-u79uwXL29TY76Z2rM5mHXA
With the RPM driver transitioned to RPMSG we can reuse the SMD-RPM
driver ontop of GLINK for 8996, without any modifications.
Signed-off-by: Bjorn Andersson <bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
drivers/soc/qcom/smd-rpm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c
index 0dcf1bf33126..c2346752b3ea 100644
--- a/drivers/soc/qcom/smd-rpm.c
+++ b/drivers/soc/qcom/smd-rpm.c
@@ -225,6 +225,7 @@ static const struct of_device_id qcom_smd_rpm_of_match[] = {
{ .compatible = "qcom,rpm-apq8084" },
{ .compatible = "qcom,rpm-msm8916" },
{ .compatible = "qcom,rpm-msm8974" },
+ { .compatible = "qcom,rpm-msm8996" },
{}
};
MODULE_DEVICE_TABLE(of, qcom_smd_rpm_of_match);
--
2.12.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg
2017-03-20 23:35 [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg Bjorn Andersson
2017-03-20 23:35 ` [PATCH 2/3] soc: qcom: smd: Remove standalone driver Bjorn Andersson
2017-03-20 23:35 ` Bjorn Andersson
@ 2017-03-21 8:20 ` Marcel Holtmann
2017-03-21 12:17 ` Kalle Valo
2017-03-22 18:44 ` David Miller
2017-03-22 21:52 ` Andy Gross
4 siblings, 1 reply; 24+ messages in thread
From: Marcel Holtmann @ 2017-03-21 8:20 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Gustavo F. Padovan, Johan Hedberg, Eugene Krasnikov, Kalle Valo,
Andy Gross, David Brown, David S. Miller, Arnd Bergmann,
open list:BLUETOOTH DRIVERS, LKML, wcn36xx, linux-wireless,
Network Development, linux-arm-msm, linux-soc
Hi Bjorn,
> By moving these client drivers to use RPMSG instead of the direct SMD
> API we can reuse them ontop of the newly added GLINK wire-protocol
> support found in the 820 and 835 Qualcomm platforms.
>
> As the new (RPMSG-based) and old SMD implementations are mutually
> exclusive we have to change all client drivers in one commit, to make
> sure we have a working system before and after this transition.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>
> Based on v4.11-rc3 with Arnd's Kconfig dependency fixes for BT_QCOMSMD
> (https://lkml.org/lkml/2017/3/20/1038).
>
> drivers/bluetooth/Kconfig | 2 +-
> drivers/bluetooth/btqcomsmd.c | 32 +++++++++----------
> drivers/net/wireless/ath/wcn36xx/Kconfig | 2 +-
> drivers/net/wireless/ath/wcn36xx/main.c | 6 ++--
> drivers/net/wireless/ath/wcn36xx/smd.c | 10 +++---
> drivers/net/wireless/ath/wcn36xx/smd.h | 6 ++--
> drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 2 +-
> drivers/soc/qcom/Kconfig | 4 +--
> drivers/soc/qcom/smd-rpm.c | 43 +++++++++++++------------
> drivers/soc/qcom/wcnss_ctrl.c | 50 +++++++++++++++++-------------
> include/linux/soc/qcom/wcnss_ctrl.h | 11 ++++---
> net/qrtr/Kconfig | 2 +-
> net/qrtr/smd.c | 42 ++++++++++++-------------
> 13 files changed, 108 insertions(+), 104 deletions(-)
I think that it is best if Dave takes these directly then and I pull them back down later into our trees. Including the Kconfig fix that I will ACK as well.
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Regards
Marcel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg
2017-03-21 8:20 ` [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg Marcel Holtmann
2017-03-21 12:17 ` Kalle Valo
@ 2017-03-21 12:17 ` Kalle Valo
0 siblings, 0 replies; 24+ messages in thread
From: Kalle Valo @ 2017-03-21 12:17 UTC (permalink / raw)
To: Marcel Holtmann
Cc: Bjorn Andersson, Gustavo F. Padovan, Johan Hedberg,
Eugene Krasnikov, Andy Gross, David Brown, David S. Miller,
Arnd Bergmann, open list:BLUETOOTH DRIVERS, LKML, wcn36xx,
linux-wireless, Network Development, linux-arm-msm, linux-soc
Marcel Holtmann <marcel@holtmann.org> writes:
>> By moving these client drivers to use RPMSG instead of the direct SMD
>> API we can reuse them ontop of the newly added GLINK wire-protocol
>> support found in the 820 and 835 Qualcomm platforms.
>>
>> As the new (RPMSG-based) and old SMD implementations are mutually
>> exclusive we have to change all client drivers in one commit, to make
>> sure we have a working system before and after this transition.
>>
>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>> ---
>>
>> Based on v4.11-rc3 with Arnd's Kconfig dependency fixes for BT_QCOMSMD
>> (https://lkml.org/lkml/2017/3/20/1038).
>>
>> drivers/bluetooth/Kconfig | 2 +-
>> drivers/bluetooth/btqcomsmd.c | 32 +++++++++----------
>> drivers/net/wireless/ath/wcn36xx/Kconfig | 2 +-
>> drivers/net/wireless/ath/wcn36xx/main.c | 6 ++--
>> drivers/net/wireless/ath/wcn36xx/smd.c | 10 +++---
>> drivers/net/wireless/ath/wcn36xx/smd.h | 6 ++--
>> drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 2 +-
>> drivers/soc/qcom/Kconfig | 4 +--
>> drivers/soc/qcom/smd-rpm.c | 43 +++++++++++++------------
>> drivers/soc/qcom/wcnss_ctrl.c | 50 +++++++++++++++++-------------
>> include/linux/soc/qcom/wcnss_ctrl.h | 11 ++++---
>> net/qrtr/Kconfig | 2 +-
>> net/qrtr/smd.c | 42 ++++++++++++-------------
>> 13 files changed, 108 insertions(+), 104 deletions(-)
>
> I think that it is best if Dave takes these directly then and I pull
> them back down later into our trees. Including the Kconfig fix that I
> will ACK as well.
>
> Acked-by: Marcel Holtmann <marcel@holtmann.org>
Sounds good to me.
Acked-by: Kalle Valo <kvalo@codeaurora.org>
--
Kalle Valo
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg
@ 2017-03-21 12:17 ` Kalle Valo
0 siblings, 0 replies; 24+ messages in thread
From: Kalle Valo @ 2017-03-21 12:17 UTC (permalink / raw)
To: Marcel Holtmann
Cc: Bjorn Andersson, Gustavo F. Padovan, Johan Hedberg,
Eugene Krasnikov, Andy Gross, David Brown, David S. Miller,
Arnd Bergmann, open list:BLUETOOTH DRIVERS, LKML, wcn36xx,
linux-wireless, Network Development, linux-arm-msm, linux-soc
Marcel Holtmann <marcel@holtmann.org> writes:
>> By moving these client drivers to use RPMSG instead of the direct SMD
>> API we can reuse them ontop of the newly added GLINK wire-protocol
>> support found in the 820 and 835 Qualcomm platforms.
>>
>> As the new (RPMSG-based) and old SMD implementations are mutually
>> exclusive we have to change all client drivers in one commit, to make
>> sure we have a working system before and after this transition.
>>
>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>> ---
>>
>> Based on v4.11-rc3 with Arnd's Kconfig dependency fixes for BT_QCOMSMD
>> (https://lkml.org/lkml/2017/3/20/1038).
>>
>> drivers/bluetooth/Kconfig | 2 +-
>> drivers/bluetooth/btqcomsmd.c | 32 +++++++++----------
>> drivers/net/wireless/ath/wcn36xx/Kconfig | 2 +-
>> drivers/net/wireless/ath/wcn36xx/main.c | 6 ++--
>> drivers/net/wireless/ath/wcn36xx/smd.c | 10 +++---
>> drivers/net/wireless/ath/wcn36xx/smd.h | 6 ++--
>> drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 2 +-
>> drivers/soc/qcom/Kconfig | 4 +--
>> drivers/soc/qcom/smd-rpm.c | 43 +++++++++++++------------
>> drivers/soc/qcom/wcnss_ctrl.c | 50 +++++++++++++++++-------------
>> include/linux/soc/qcom/wcnss_ctrl.h | 11 ++++---
>> net/qrtr/Kconfig | 2 +-
>> net/qrtr/smd.c | 42 ++++++++++++-------------
>> 13 files changed, 108 insertions(+), 104 deletions(-)
>
> I think that it is best if Dave takes these directly then and I pull
> them back down later into our trees. Including the Kconfig fix that I
> will ACK as well.
>
> Acked-by: Marcel Holtmann <marcel@holtmann.org>
Sounds good to me.
Acked-by: Kalle Valo <kvalo@codeaurora.org>
--
Kalle Valo
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg
@ 2017-03-21 12:17 ` Kalle Valo
0 siblings, 0 replies; 24+ messages in thread
From: Kalle Valo @ 2017-03-21 12:17 UTC (permalink / raw)
To: Marcel Holtmann
Cc: Bjorn Andersson, Gustavo F. Padovan, Johan Hedberg,
Eugene Krasnikov, Andy Gross, David Brown, David S. Miller,
Arnd Bergmann, open list:BLUETOOTH DRIVERS, LKML, wcn36xx,
linux-wireless, Network Development, linux-arm-msm, linux-soc
Marcel Holtmann <marcel@holtmann.org> writes:
>> By moving these client drivers to use RPMSG instead of the direct SMD
>> API we can reuse them ontop of the newly added GLINK wire-protocol
>> support found in the 820 and 835 Qualcomm platforms.
>>
>> As the new (RPMSG-based) and old SMD implementations are mutually
>> exclusive we have to change all client drivers in one commit, to make
>> sure we have a working system before and after this transition.
>>
>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>> ---
>>
>> Based on v4.11-rc3 with Arnd's Kconfig dependency fixes for BT_QCOMSMD
>> (https://lkml.org/lkml/2017/3/20/1038).
>>
>> drivers/bluetooth/Kconfig | 2 +-
>> drivers/bluetooth/btqcomsmd.c | 32 +++++++++----------
>> drivers/net/wireless/ath/wcn36xx/Kconfig | 2 +-
>> drivers/net/wireless/ath/wcn36xx/main.c | 6 ++--
>> drivers/net/wireless/ath/wcn36xx/smd.c | 10 +++---
>> drivers/net/wireless/ath/wcn36xx/smd.h | 6 ++--
>> drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 2 +-
>> drivers/soc/qcom/Kconfig | 4 +--
>> drivers/soc/qcom/smd-rpm.c | 43 +++++++++++++------------
>> drivers/soc/qcom/wcnss_ctrl.c | 50 +++++++++++++++++-------------
>> include/linux/soc/qcom/wcnss_ctrl.h | 11 ++++---
>> net/qrtr/Kconfig | 2 +-
>> net/qrtr/smd.c | 42 ++++++++++++-------------
>> 13 files changed, 108 insertions(+), 104 deletions(-)
>
> I think that it is best if Dave takes these directly then and I pull
> them back down later into our trees. Including the Kconfig fix that I
> will ACK as well.
>
> Acked-by: Marcel Holtmann <marcel@holtmann.org>
Sounds good to me.
Acked-by: Kalle Valo <kvalo@codeaurora.org>
--
Kalle Valo
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg
2017-03-20 23:35 [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg Bjorn Andersson
` (2 preceding siblings ...)
2017-03-21 8:20 ` [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg Marcel Holtmann
@ 2017-03-22 18:44 ` David Miller
2017-03-22 19:23 ` Marcel Holtmann
` (2 more replies)
2017-03-22 21:52 ` Andy Gross
4 siblings, 3 replies; 24+ messages in thread
From: David Miller @ 2017-03-22 18:44 UTC (permalink / raw)
To: bjorn.andersson
Cc: marcel, gustavo, johan.hedberg, k.eugene.e, kvalo, andy.gross,
david.brown, arnd, linux-bluetooth, linux-kernel, wcn36xx,
linux-wireless, netdev, linux-arm-msm, linux-soc
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Date: Mon, 20 Mar 2017 16:35:42 -0700
> By moving these client drivers to use RPMSG instead of the direct SMD
> API we can reuse them ontop of the newly added GLINK wire-protocol
> support found in the 820 and 835 Qualcomm platforms.
>
> As the new (RPMSG-based) and old SMD implementations are mutually
> exclusive we have to change all client drivers in one commit, to make
> sure we have a working system before and after this transition.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>
> Based on v4.11-rc3 with Arnd's Kconfig dependency fixes for BT_QCOMSMD
> (https://lkml.org/lkml/2017/3/20/1038).
Just some questions since I'm supposed to merge this into my net-next
tree.
What is the status of the Kconfig dependency fix and how will I be
getting it?
Second, should I merge all three of these patches to net-next or just
this one?
Thanks.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg
2017-03-22 18:44 ` David Miller
@ 2017-03-22 19:23 ` Marcel Holtmann
2017-03-23 2:23 ` David Miller
2017-03-22 21:56 ` Andy Gross
2017-03-22 21:57 ` Bjorn Andersson
2 siblings, 1 reply; 24+ messages in thread
From: Marcel Holtmann @ 2017-03-22 19:23 UTC (permalink / raw)
To: David S. Miller
Cc: Bjorn Andersson, Gustavo F. Padovan, Johan Hedberg,
Eugene Krasnikov, Kalle Valo, Andy Gross, David Brown, arnd,
linux-bluetooth, linux-kernel, wcn36xx, linux-wireless, netdev,
linux-arm-msm, linux-soc
Hi Dave,
>> By moving these client drivers to use RPMSG instead of the direct SMD
>> API we can reuse them ontop of the newly added GLINK wire-protocol
>> support found in the 820 and 835 Qualcomm platforms.
>>
>> As the new (RPMSG-based) and old SMD implementations are mutually
>> exclusive we have to change all client drivers in one commit, to make
>> sure we have a working system before and after this transition.
>>
>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>> ---
>>
>> Based on v4.11-rc3 with Arnd's Kconfig dependency fixes for BT_QCOMSMD
>> (https://lkml.org/lkml/2017/3/20/1038).
>
> Just some questions since I'm supposed to merge this into my net-next
> tree.
>
> What is the status of the Kconfig dependency fix and how will I be
> getting it?
I acked that one separately and added you:
[PATCH v2] Bluetooth: btqcomsmd: fix compile-test dependency
> Second, should I merge all three of these patches to net-next or just
> this one?
I think you have to take all 3 patches. Otherwise it will break.
Regards
Marcel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg
2017-03-20 23:35 [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg Bjorn Andersson
` (3 preceding siblings ...)
2017-03-22 18:44 ` David Miller
@ 2017-03-22 21:52 ` Andy Gross
4 siblings, 0 replies; 24+ messages in thread
From: Andy Gross @ 2017-03-22 21:52 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Marcel Holtmann, Gustavo Padovan, Johan Hedberg,
Eugene Krasnikov, Kalle Valo, David Brown, David S. Miller,
Arnd Bergmann, linux-bluetooth, linux-kernel, wcn36xx,
linux-wireless, netdev, linux-arm-msm, linux-soc
On Mon, Mar 20, 2017 at 04:35:42PM -0700, Bjorn Andersson wrote:
> By moving these client drivers to use RPMSG instead of the direct SMD
> API we can reuse them ontop of the newly added GLINK wire-protocol
> support found in the 820 and 835 Qualcomm platforms.
>
> As the new (RPMSG-based) and old SMD implementations are mutually
> exclusive we have to change all client drivers in one commit, to make
> sure we have a working system before and after this transition.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
For the qcom/smd parts:
Acked-by: Andy Gross <andy.gross@linaro.org>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 2/3] soc: qcom: smd: Remove standalone driver
2017-03-20 23:35 ` [PATCH 2/3] soc: qcom: smd: Remove standalone driver Bjorn Andersson
@ 2017-03-22 21:53 ` Andy Gross
0 siblings, 0 replies; 24+ messages in thread
From: Andy Gross @ 2017-03-22 21:53 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Marcel Holtmann, Gustavo Padovan, Johan Hedberg,
Eugene Krasnikov, Kalle Valo, David Brown, David S. Miller,
Arnd Bergmann, linux-bluetooth, linux-kernel, wcn36xx,
linux-wireless, netdev, linux-arm-msm, linux-soc
On Mon, Mar 20, 2017 at 04:35:43PM -0700, Bjorn Andersson wrote:
> Remove the standalone SMD implementation as we have transitioned the
> client drivers to use the RPMSG based one.
>
> Also remove all dependencies on QCOM_SMD from Kconfig files, in order to
> keep them selectable in the absence of the removed symbol.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] soc: qcom: smd-rpm: Add msm8996 compatibility
@ 2017-03-22 21:54 ` Andy Gross
0 siblings, 0 replies; 24+ messages in thread
From: Andy Gross @ 2017-03-22 21:54 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Marcel Holtmann, Gustavo Padovan, Johan Hedberg,
Eugene Krasnikov, Kalle Valo, David Brown, David S. Miller,
Arnd Bergmann, linux-bluetooth, linux-kernel, wcn36xx,
linux-wireless, netdev, linux-arm-msm, linux-soc
On Mon, Mar 20, 2017 at 04:35:44PM -0700, Bjorn Andersson wrote:
> With the RPM driver transitioned to RPMSG we can reuse the SMD-RPM
> driver ontop of GLINK for 8996, without any modifications.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] soc: qcom: smd-rpm: Add msm8996 compatibility
@ 2017-03-22 21:54 ` Andy Gross
0 siblings, 0 replies; 24+ messages in thread
From: Andy Gross @ 2017-03-22 21:54 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Marcel Holtmann, Gustavo Padovan, Johan Hedberg,
Eugene Krasnikov, Kalle Valo, David Brown, David S. Miller,
Arnd Bergmann, linux-bluetooth-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
wcn36xx-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-wireless-u79uwXL29TY76Z2rM5mHXA,
netdev-u79uwXL29TY76Z2rM5mHXA,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-soc-u79uwXL29TY76Z2rM5mHXA
On Mon, Mar 20, 2017 at 04:35:44PM -0700, Bjorn Andersson wrote:
> With the RPM driver transitioned to RPMSG we can reuse the SMD-RPM
> driver ontop of GLINK for 8996, without any modifications.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Acked-by: Andy Gross <andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg
2017-03-22 18:44 ` David Miller
2017-03-22 19:23 ` Marcel Holtmann
@ 2017-03-22 21:56 ` Andy Gross
2017-03-22 21:57 ` Bjorn Andersson
2 siblings, 0 replies; 24+ messages in thread
From: Andy Gross @ 2017-03-22 21:56 UTC (permalink / raw)
To: David Miller
Cc: bjorn.andersson, marcel, gustavo, johan.hedberg, k.eugene.e,
kvalo, david.brown, arnd, linux-bluetooth, linux-kernel, wcn36xx,
linux-wireless, netdev, linux-arm-msm, linux-soc
On Wed, Mar 22, 2017 at 11:44:39AM -0700, David Miller wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> Date: Mon, 20 Mar 2017 16:35:42 -0700
>
> > By moving these client drivers to use RPMSG instead of the direct SMD
> > API we can reuse them ontop of the newly added GLINK wire-protocol
> > support found in the 820 and 835 Qualcomm platforms.
> >
> > As the new (RPMSG-based) and old SMD implementations are mutually
> > exclusive we have to change all client drivers in one commit, to make
> > sure we have a working system before and after this transition.
> >
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > ---
> >
> > Based on v4.11-rc3 with Arnd's Kconfig dependency fixes for BT_QCOMSMD
> > (https://lkml.org/lkml/2017/3/20/1038).
>
> Just some questions since I'm supposed to merge this into my net-next
> tree.
>
> What is the status of the Kconfig dependency fix and how will I be
> getting it?
>
> Second, should I merge all three of these patches to net-next or just
> this one?
David,
I ack'd all three. Please take these through your tree.
Bjorn,
Are we going to need an immutable branch or tag for sychronizing work?
Regards,
Andy Gross
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg
@ 2017-03-22 21:57 ` Bjorn Andersson
0 siblings, 0 replies; 24+ messages in thread
From: Bjorn Andersson @ 2017-03-22 21:57 UTC (permalink / raw)
To: David Miller
Cc: marcel, gustavo, johan.hedberg, k.eugene.e, kvalo, andy.gross,
david.brown, arnd, linux-bluetooth, linux-kernel, wcn36xx,
linux-wireless, netdev, linux-arm-msm, linux-soc
On Wed 22 Mar 11:44 PDT 2017, David Miller wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> Date: Mon, 20 Mar 2017 16:35:42 -0700
>
> > By moving these client drivers to use RPMSG instead of the direct SMD
> > API we can reuse them ontop of the newly added GLINK wire-protocol
> > support found in the 820 and 835 Qualcomm platforms.
> >
> > As the new (RPMSG-based) and old SMD implementations are mutually
> > exclusive we have to change all client drivers in one commit, to make
> > sure we have a working system before and after this transition.
> >
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > ---
> >
> > Based on v4.11-rc3 with Arnd's Kconfig dependency fixes for BT_QCOMSMD
> > (https://lkml.org/lkml/2017/3/20/1038).
>
> Just some questions since I'm supposed to merge this into my net-next
> tree.
>
> What is the status of the Kconfig dependency fix and how will I be
> getting it?
>
There are two Kconfig dependencies in play here, the first is
c3104aae5d8c ("remoteproc: qcom: fix QCOM_SMD dependencies"), this was
picked up by Linus yesterday and will as such be in v4.10-rc4.
The other dependency, is the one Marcel wants you to pick up here is
https://patchwork.kernel.org/patch/9635385/. It's on LKML, but if you
want I can resend it with you as direct recipient, with Marcel's ack.
Likely Arnd would like this fix to be sent upstream for v4.11 already.
> Second, should I merge all three of these patches to net-next or just
> this one?
>
I would like all three to be merged in this cycle and in addition I have
a couple of patches coming up that will cause some minor conflicts with
patch 2 - so I would prefer if patch 2 was available in a tag I can
merge into my tree.
Would it be possible for you to prepare merge all 4 (these 3 and the
bluetooth fix) and prepare a tag for Andy, Marcel and myself to include
in our trees?
Regards,
Bjorn
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg
@ 2017-03-22 21:57 ` Bjorn Andersson
0 siblings, 0 replies; 24+ messages in thread
From: Bjorn Andersson @ 2017-03-22 21:57 UTC (permalink / raw)
To: David Miller
Cc: marcel-kz+m5ild9QBg9hUCZPvPmw, gustavo-THi1TnShQwVAfugRpC6u6w,
johan.hedberg-Re5JQEeQqe8AvxtiuMwx3w,
k.eugene.e-Re5JQEeQqe8AvxtiuMwx3w, kvalo-sgV2jX0FEOL9JmXXK+q4OQ,
andy.gross-QSEj5FYQhm4dnm+yROfE0A,
david.brown-QSEj5FYQhm4dnm+yROfE0A, arnd-r2nGTMty4D4,
linux-bluetooth-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
wcn36xx-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-wireless-u79uwXL29TY76Z2rM5mHXA,
netdev-u79uwXL29TY76Z2rM5mHXA,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-soc-u79uwXL29TY76Z2rM5mHXA
On Wed 22 Mar 11:44 PDT 2017, David Miller wrote:
> From: Bjorn Andersson <bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Date: Mon, 20 Mar 2017 16:35:42 -0700
>
> > By moving these client drivers to use RPMSG instead of the direct SMD
> > API we can reuse them ontop of the newly added GLINK wire-protocol
> > support found in the 820 and 835 Qualcomm platforms.
> >
> > As the new (RPMSG-based) and old SMD implementations are mutually
> > exclusive we have to change all client drivers in one commit, to make
> > sure we have a working system before and after this transition.
> >
> > Signed-off-by: Bjorn Andersson <bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> > ---
> >
> > Based on v4.11-rc3 with Arnd's Kconfig dependency fixes for BT_QCOMSMD
> > (https://lkml.org/lkml/2017/3/20/1038).
>
> Just some questions since I'm supposed to merge this into my net-next
> tree.
>
> What is the status of the Kconfig dependency fix and how will I be
> getting it?
>
There are two Kconfig dependencies in play here, the first is
c3104aae5d8c ("remoteproc: qcom: fix QCOM_SMD dependencies"), this was
picked up by Linus yesterday and will as such be in v4.10-rc4.
The other dependency, is the one Marcel wants you to pick up here is
https://patchwork.kernel.org/patch/9635385/. It's on LKML, but if you
want I can resend it with you as direct recipient, with Marcel's ack.
Likely Arnd would like this fix to be sent upstream for v4.11 already.
> Second, should I merge all three of these patches to net-next or just
> this one?
>
I would like all three to be merged in this cycle and in addition I have
a couple of patches coming up that will cause some minor conflicts with
patch 2 - so I would prefer if patch 2 was available in a tag I can
merge into my tree.
Would it be possible for you to prepare merge all 4 (these 3 and the
bluetooth fix) and prepare a tag for Andy, Marcel and myself to include
in our trees?
Regards,
Bjorn
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg
@ 2017-03-23 2:23 ` David Miller
0 siblings, 0 replies; 24+ messages in thread
From: David Miller @ 2017-03-23 2:23 UTC (permalink / raw)
To: marcel
Cc: bjorn.andersson, gustavo, johan.hedberg, k.eugene.e, kvalo,
andy.gross, david.brown, arnd, linux-bluetooth, linux-kernel,
wcn36xx, linux-wireless, netdev, linux-arm-msm, linux-soc
From: Marcel Holtmann <marcel@holtmann.org>
Date: Wed, 22 Mar 2017 20:23:15 +0100
> Hi Dave,
>
>>> By moving these client drivers to use RPMSG instead of the direct SMD
>>> API we can reuse them ontop of the newly added GLINK wire-protocol
>>> support found in the 820 and 835 Qualcomm platforms.
>>>
>>> As the new (RPMSG-based) and old SMD implementations are mutually
>>> exclusive we have to change all client drivers in one commit, to make
>>> sure we have a working system before and after this transition.
>>>
>>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>>> ---
>>>
>>> Based on v4.11-rc3 with Arnd's Kconfig dependency fixes for BT_QCOMSMD
>>> (https://lkml.org/lkml/2017/3/20/1038).
>>
>> Just some questions since I'm supposed to merge this into my net-next
>> tree.
>>
>> What is the status of the Kconfig dependency fix and how will I be
>> getting it?
>
> I acked that one separately and added you:
>
> [PATCH v2] Bluetooth: btqcomsmd: fix compile-test dependency
I applied this to my 'net' tree, thanks.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg
@ 2017-03-23 2:23 ` David Miller
0 siblings, 0 replies; 24+ messages in thread
From: David Miller @ 2017-03-23 2:23 UTC (permalink / raw)
To: marcel-kz+m5ild9QBg9hUCZPvPmw
Cc: bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A,
gustavo-THi1TnShQwVAfugRpC6u6w,
johan.hedberg-Re5JQEeQqe8AvxtiuMwx3w,
k.eugene.e-Re5JQEeQqe8AvxtiuMwx3w, kvalo-sgV2jX0FEOL9JmXXK+q4OQ,
andy.gross-QSEj5FYQhm4dnm+yROfE0A,
david.brown-QSEj5FYQhm4dnm+yROfE0A, arnd-r2nGTMty4D4,
linux-bluetooth-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
wcn36xx-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-wireless-u79uwXL29TY76Z2rM5mHXA,
netdev-u79uwXL29TY76Z2rM5mHXA,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-soc-u79uwXL29TY76Z2rM5mHXA
From: Marcel Holtmann <marcel-kz+m5ild9QBg9hUCZPvPmw@public.gmane.org>
Date: Wed, 22 Mar 2017 20:23:15 +0100
> Hi Dave,
>
>>> By moving these client drivers to use RPMSG instead of the direct SMD
>>> API we can reuse them ontop of the newly added GLINK wire-protocol
>>> support found in the 820 and 835 Qualcomm platforms.
>>>
>>> As the new (RPMSG-based) and old SMD implementations are mutually
>>> exclusive we have to change all client drivers in one commit, to make
>>> sure we have a working system before and after this transition.
>>>
>>> Signed-off-by: Bjorn Andersson <bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>>> ---
>>>
>>> Based on v4.11-rc3 with Arnd's Kconfig dependency fixes for BT_QCOMSMD
>>> (https://lkml.org/lkml/2017/3/20/1038).
>>
>> Just some questions since I'm supposed to merge this into my net-next
>> tree.
>>
>> What is the status of the Kconfig dependency fix and how will I be
>> getting it?
>
> I acked that one separately and added you:
>
> [PATCH v2] Bluetooth: btqcomsmd: fix compile-test dependency
I applied this to my 'net' tree, thanks.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg
2017-03-22 21:57 ` Bjorn Andersson
(?)
@ 2017-03-23 23:56 ` David Miller
2017-03-27 22:58 ` Bjorn Andersson
-1 siblings, 1 reply; 24+ messages in thread
From: David Miller @ 2017-03-23 23:56 UTC (permalink / raw)
To: bjorn.andersson
Cc: marcel, gustavo, johan.hedberg, k.eugene.e, kvalo, andy.gross,
david.brown, arnd, linux-bluetooth, linux-kernel, wcn36xx,
linux-wireless, netdev, linux-arm-msm, linux-soc
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Date: Wed, 22 Mar 2017 14:57:33 -0700
> On Wed 22 Mar 11:44 PDT 2017, David Miller wrote:
>
>> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>> Date: Mon, 20 Mar 2017 16:35:42 -0700
>>
>> What is the status of the Kconfig dependency fix and how will I be
>> getting it?
>>
>
> There are two Kconfig dependencies in play here, the first is
> c3104aae5d8c ("remoteproc: qcom: fix QCOM_SMD dependencies"), this was
> picked up by Linus yesterday and will as such be in v4.10-rc4.
>
> The other dependency, is the one Marcel wants you to pick up here is
> https://patchwork.kernel.org/patch/9635385/. It's on LKML, but if you
> want I can resend it with you as direct recipient, with Marcel's ack.
>
> Likely Arnd would like this fix to be sent upstream for v4.11 already.
>
>> Second, should I merge all three of these patches to net-next or just
>> this one?
>>
>
> I would like all three to be merged in this cycle and in addition I have
> a couple of patches coming up that will cause some minor conflicts with
> patch 2 - so I would prefer if patch 2 was available in a tag I can
> merge into my tree.
I should have all the dependencies in net-next now, but when I apply
this series I get undefined symbols:
[davem@localhost net-next]$ time make -s -j8
Kernel: arch/x86/boot/bzImage is ready (#578)
ERROR: "qcom_rpm_smd_write" [drivers/regulator/qcom_smd-regulator.ko] undefined!
ERROR: "qcom_wcnss_open_channel" [drivers/net/wireless/ath/wcn36xx/wcn36xx.ko] undefined!
ERROR: "qcom_rpm_smd_write" [drivers/clk/qcom/clk-smd-rpm.ko] undefined!
ERROR: "qcom_wcnss_open_channel" [drivers/bluetooth/btqcomsmd.ko] undefined!
scripts/Makefile.modpost:91: recipe for target '__modpost' failed
Please fix this up.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg
2017-03-23 23:56 ` David Miller
@ 2017-03-27 22:58 ` Bjorn Andersson
2017-03-27 23:04 ` David Miller
0 siblings, 1 reply; 24+ messages in thread
From: Bjorn Andersson @ 2017-03-27 22:58 UTC (permalink / raw)
To: David Miller
Cc: marcel, gustavo, johan.hedberg, k.eugene.e, kvalo, andy.gross,
david.brown, arnd, linux-bluetooth, linux-kernel, wcn36xx,
linux-wireless, netdev, linux-arm-msm, linux-soc
On Thu 23 Mar 16:56 PDT 2017, David Miller wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> Date: Wed, 22 Mar 2017 14:57:33 -0700
>
> > On Wed 22 Mar 11:44 PDT 2017, David Miller wrote:
> >
> >> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> >> Date: Mon, 20 Mar 2017 16:35:42 -0700
> >>
> >> What is the status of the Kconfig dependency fix and how will I be
> >> getting it?
> >>
> >
> > There are two Kconfig dependencies in play here, the first is
> > c3104aae5d8c ("remoteproc: qcom: fix QCOM_SMD dependencies"), this was
> > picked up by Linus yesterday and will as such be in v4.10-rc4.
> >
> > The other dependency, is the one Marcel wants you to pick up here is
> > https://patchwork.kernel.org/patch/9635385/. It's on LKML, but if you
> > want I can resend it with you as direct recipient, with Marcel's ack.
> >
> > Likely Arnd would like this fix to be sent upstream for v4.11 already.
> >
> >> Second, should I merge all three of these patches to net-next or just
> >> this one?
> >>
> >
> > I would like all three to be merged in this cycle and in addition I have
> > a couple of patches coming up that will cause some minor conflicts with
> > patch 2 - so I would prefer if patch 2 was available in a tag I can
> > merge into my tree.
>
> I should have all the dependencies in net-next now, but when I apply
> this series I get undefined symbols:
>
I'm sorry, but I can't figure out how to reproduce this. I took the
master branch of net-next and applied the three patches in this series.
> [davem@localhost net-next]$ time make -s -j8
> Kernel: arch/x86/boot/bzImage is ready (#578)
> ERROR: "qcom_rpm_smd_write" [drivers/regulator/qcom_smd-regulator.ko] undefined!
According to drivers/regulator/Kconfig REGULATOR_QCOM_SMD_RPM depends on
QCOM_SMD_RPM and there's nothing tricky here. So if the Kconfig
dependency is met you should have qcom_rpm_smd_write().
> ERROR: "qcom_wcnss_open_channel" [drivers/net/wireless/ath/wcn36xx/wcn36xx.ko] undefined!
WCN36XX depends on QCOM_WCNSS_CTRL || QCOM_WCNSS_CTRL=n, in other words
either qcom_wcnss_open_channel() should be defined from
drivers/soc/qcom/wcnss_ctrl.o (or .ko) or be stubbed by
include/linux/soc/qcom/wcnss_ctrl.h
> ERROR: "qcom_rpm_smd_write" [drivers/clk/qcom/clk-smd-rpm.ko] undefined!
As with REGULATOR_QCOM_SMD_RPM, this depends on QCOM_SMD_RPM - so it
should be covered.
> ERROR: "qcom_wcnss_open_channel" [drivers/bluetooth/btqcomsmd.ko] undefined!
This is the problem that was corrected by 6e9e6cc8f4e4 ("Bluetooth:
btqcomsmd: fix compile-test dependency") and with the same dependencies
as CONFIG_WCN36XX I don't see how this can happen (with that patch
applied).
> scripts/Makefile.modpost:91: recipe for target '__modpost' failed
>
> Please fix this up.
Can you please help me figure this out?
Perhaps you can help me figure it out by letting me know the state of
the following config options in your local .config?
CONFIG_QCOM_SMD_RPM
CONFIG_QCOM_WCNSS_CTRL
CONFIG_REGULATOR_QCOM_SMD_RPM
CONFIG_RPMSG
CONFIG_WCN36XX
I'm sorry for the inconvenience.
Regards,
Bjorn
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg
2017-03-27 22:58 ` Bjorn Andersson
@ 2017-03-27 23:04 ` David Miller
2017-03-28 5:49 ` Bjorn Andersson
0 siblings, 1 reply; 24+ messages in thread
From: David Miller @ 2017-03-27 23:04 UTC (permalink / raw)
To: bjorn.andersson
Cc: marcel, gustavo, johan.hedberg, k.eugene.e, kvalo, andy.gross,
david.brown, arnd, linux-bluetooth, linux-kernel, wcn36xx,
linux-wireless, netdev, linux-arm-msm, linux-soc
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Date: Mon, 27 Mar 2017 15:58:37 -0700
> I'm sorry, but I can't figure out how to reproduce this.
All of my builds are "make allmodconfig" so it should be easy to reproduce.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg
2017-03-27 23:04 ` David Miller
@ 2017-03-28 5:49 ` Bjorn Andersson
2017-03-29 0:58 ` David Miller
0 siblings, 1 reply; 24+ messages in thread
From: Bjorn Andersson @ 2017-03-28 5:49 UTC (permalink / raw)
To: David Miller
Cc: marcel, gustavo, johan.hedberg, k.eugene.e, kvalo, andy.gross,
david.brown, arnd, linux-bluetooth, linux-kernel, wcn36xx,
linux-wireless, netdev, linux-arm-msm, linux-soc
On Mon 27 Mar 16:04 PDT 2017, David Miller wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> Date: Mon, 27 Mar 2017 15:58:37 -0700
>
> > I'm sorry, but I can't figure out how to reproduce this.
>
> All of my builds are "make allmodconfig" so it should be easy to reproduce.
Thanks, turns out that while it was possible to select CONFIG_SMD_RPM
and CONFIG_QCOM_WCNSS_CTRL drivers/soc/Makefile does not traverse into
qcom/ unless CONFIG_ARCH_QCOM was set.
So I just sent out version 2 of the three patches, where I add an
explicit dependency on ARCH_QCOM for those two options.
Regards,
Bjorn
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg
2017-03-28 5:49 ` Bjorn Andersson
@ 2017-03-29 0:58 ` David Miller
0 siblings, 0 replies; 24+ messages in thread
From: David Miller @ 2017-03-29 0:58 UTC (permalink / raw)
To: bjorn.andersson
Cc: marcel, gustavo, johan.hedberg, k.eugene.e, kvalo, andy.gross,
david.brown, arnd, linux-bluetooth, linux-kernel, wcn36xx,
linux-wireless, netdev, linux-arm-msm, linux-soc
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Date: Mon, 27 Mar 2017 22:49:22 -0700
> On Mon 27 Mar 16:04 PDT 2017, David Miller wrote:
>
>> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>> Date: Mon, 27 Mar 2017 15:58:37 -0700
>>
>> > I'm sorry, but I can't figure out how to reproduce this.
>>
>> All of my builds are "make allmodconfig" so it should be easy to reproduce.
>
> Thanks, turns out that while it was possible to select CONFIG_SMD_RPM
> and CONFIG_QCOM_WCNSS_CTRL drivers/soc/Makefile does not traverse into
> qcom/ unless CONFIG_ARCH_QCOM was set.
>
> So I just sent out version 2 of the three patches, where I add an
> explicit dependency on ARCH_QCOM for those two options.
Looks great, all three applied.
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2017-03-29 0:58 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-03-20 23:35 [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg Bjorn Andersson
2017-03-20 23:35 ` [PATCH 2/3] soc: qcom: smd: Remove standalone driver Bjorn Andersson
2017-03-22 21:53 ` Andy Gross
2017-03-20 23:35 ` [PATCH 3/3] soc: qcom: smd-rpm: Add msm8996 compatibility Bjorn Andersson
2017-03-20 23:35 ` Bjorn Andersson
2017-03-22 21:54 ` Andy Gross
2017-03-22 21:54 ` Andy Gross
2017-03-21 8:20 ` [PATCH 1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg Marcel Holtmann
2017-03-21 12:17 ` Kalle Valo
2017-03-21 12:17 ` Kalle Valo
2017-03-21 12:17 ` Kalle Valo
2017-03-22 18:44 ` David Miller
2017-03-22 19:23 ` Marcel Holtmann
2017-03-23 2:23 ` David Miller
2017-03-23 2:23 ` David Miller
2017-03-22 21:56 ` Andy Gross
2017-03-22 21:57 ` Bjorn Andersson
2017-03-22 21:57 ` Bjorn Andersson
2017-03-23 23:56 ` David Miller
2017-03-27 22:58 ` Bjorn Andersson
2017-03-27 23:04 ` David Miller
2017-03-28 5:49 ` Bjorn Andersson
2017-03-29 0:58 ` David Miller
2017-03-22 21:52 ` Andy Gross
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.