* [Qemu-devel] [PULL for-2.9 01/10] rbd: Reject -blockdev server.*.{numeric, to, ipv4, ipv6}
2017-03-28 14:05 [Qemu-devel] [PULL for-2.9 00/10] Block patches for -rc2 Jeff Cody
@ 2017-03-28 14:05 ` Jeff Cody
2017-03-28 14:05 ` [Qemu-devel] [PULL for-2.9 02/10] rbd: Fix to cleanly reject -drive without pool or image Jeff Cody
` (9 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Jeff Cody @ 2017-03-28 14:05 UTC (permalink / raw)
To: qemu-block; +Cc: peter.maydell, jcody, armbru, qemu-devel
From: Markus Armbruster <armbru@redhat.com>
We use InetSocketAddress in the QAPI schema. However, the code
doesn't use inet_connect_saddr(), but formats "host" and "port" into a
configuration string for rados_conf_set(). Thus, members "numeric",
"to", "ipv4" and "ipv6" are silently ignored. Not nice. Example:
-blockdev rbd,node-name=nn,pool=p,image=i,server.0.host=h0,server.0.port=12345,server.0.ipv4=off
Factor a suitable InetSocketAddressBase out of InetSocketAddress, and
use that. "numeric", "to", "ipv4" and "ipv6" are now rejected.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-2-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
---
qapi-schema.json | 21 ++++++++++++++-------
qapi/block-core.json | 2 +-
2 files changed, 15 insertions(+), 8 deletions(-)
diff --git a/qapi-schema.json b/qapi-schema.json
index 68a4327..b921994 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -4051,19 +4051,27 @@
'data': [ 'all', 'rx', 'tx' ] }
##
+# @InetSocketAddressBase:
+#
+# @host: host part of the address
+# @port: port part of the address
+##
+{ 'struct': 'InetSocketAddressBase',
+ 'data': {
+ 'host': 'str',
+ 'port': 'str' } }
+
+##
# @InetSocketAddress:
#
# Captures a socket address or address range in the Internet namespace.
#
-# @host: host part of the address
-#
-# @port: port part of the address, or lowest port if @to is present
-#
# @numeric: true if the host/port are guaranteed to be numeric,
# false if name resolution should be attempted. Defaults to false.
# (Since 2.9)
#
-# @to: highest port to try
+# @to: If present, this is range of possible addresses, with port
+# between @port and @to.
#
# @ipv4: whether to accept IPv4 addresses, default try both IPv4 and IPv6
#
@@ -4072,9 +4080,8 @@
# Since: 1.3
##
{ 'struct': 'InetSocketAddress',
+ 'base': 'InetSocketAddressBase',
'data': {
- 'host': 'str',
- 'port': 'str',
'*numeric': 'bool',
'*to': 'uint16',
'*ipv4': 'bool',
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 0f132fc..5d2efe4 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -2652,7 +2652,7 @@
'*conf': 'str',
'*snapshot': 'str',
'*user': 'str',
- '*server': ['InetSocketAddress'],
+ '*server': ['InetSocketAddressBase'],
'*auth-supported': ['RbdAuthMethod'],
'*password-secret': 'str' } }
--
2.9.3
^ permalink raw reply related [flat|nested] 12+ messages in thread* [Qemu-devel] [PULL for-2.9 02/10] rbd: Fix to cleanly reject -drive without pool or image
2017-03-28 14:05 [Qemu-devel] [PULL for-2.9 00/10] Block patches for -rc2 Jeff Cody
2017-03-28 14:05 ` [Qemu-devel] [PULL for-2.9 01/10] rbd: Reject -blockdev server.*.{numeric, to, ipv4, ipv6} Jeff Cody
@ 2017-03-28 14:05 ` Jeff Cody
2017-03-28 14:05 ` [Qemu-devel] [PULL for-2.9 03/10] rbd: Don't limit length of parameter values Jeff Cody
` (8 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Jeff Cody @ 2017-03-28 14:05 UTC (permalink / raw)
To: qemu-block; +Cc: peter.maydell, jcody, armbru, qemu-devel
From: Markus Armbruster <armbru@redhat.com>
qemu_rbd_open() neglects to check pool and image are present. Missing
image is caught by rbd_open(), but missing pool crashes. Reproducer:
$ qemu-system-x86_64 -nodefaults -drive driver=rbd,id=rbd,image=i,...
terminate called after throwing an instance of 'std::logic_error'
what(): basic_string::_M_construct null not valid
Aborted (core dumped)
where ... is a working server.0.{host,port} configuration.
Doesn't affect -drive with file=..., because qemu_rbd_parse_filename()
always sets both pool and image.
Doesn't affect -blockdev, because pool and image are mandatory in the
QAPI schema.
Fix by adding the missing checks.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-3-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
---
block/rbd.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/block/rbd.c b/block/rbd.c
index ee13f3d..5ba2a87 100644
--- a/block/rbd.c
+++ b/block/rbd.c
@@ -711,6 +711,12 @@ static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags,
name = qemu_opt_get(opts, "image");
keypairs = qemu_opt_get(opts, "keyvalue-pairs");
+ if (!pool || !name) {
+ error_setg(errp, "Parameters 'pool' and 'image' are required");
+ r = -EINVAL;
+ goto failed_opts;
+ }
+
r = rados_create(&s->cluster, clientname);
if (r < 0) {
error_setg_errno(errp, -r, "error initializing");
@@ -718,9 +724,7 @@ static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags,
}
s->snap = g_strdup(snap);
- if (name) {
- pstrcpy(s->name, RBD_MAX_IMAGE_NAME_SIZE, name);
- }
+ pstrcpy(s->name, RBD_MAX_IMAGE_NAME_SIZE, name);
/* try default location when conf=NULL, but ignore failure */
r = rados_conf_read_file(s->cluster, conf);
--
2.9.3
^ permalink raw reply related [flat|nested] 12+ messages in thread* [Qemu-devel] [PULL for-2.9 03/10] rbd: Don't limit length of parameter values
2017-03-28 14:05 [Qemu-devel] [PULL for-2.9 00/10] Block patches for -rc2 Jeff Cody
2017-03-28 14:05 ` [Qemu-devel] [PULL for-2.9 01/10] rbd: Reject -blockdev server.*.{numeric, to, ipv4, ipv6} Jeff Cody
2017-03-28 14:05 ` [Qemu-devel] [PULL for-2.9 02/10] rbd: Fix to cleanly reject -drive without pool or image Jeff Cody
@ 2017-03-28 14:05 ` Jeff Cody
2017-03-28 14:05 ` [Qemu-devel] [PULL for-2.9 04/10] rbd: Clean up after the previous commit Jeff Cody
` (7 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Jeff Cody @ 2017-03-28 14:05 UTC (permalink / raw)
To: qemu-block; +Cc: peter.maydell, jcody, armbru, qemu-devel
From: Markus Armbruster <armbru@redhat.com>
We laboriously enforce that parameter values are between one and some
arbitrary limit in length. Only RBD_MAX_IMAGE_NAME_SIZE comes from
librbd.h, and I'm not sure it applies. Where the other limits come
from is unclear.
Drop the length checking. The limits librbd actually imposes must be
checked by librbd anyway.
There's one minor complication: BDRVRBDState member name is a
fixed-size array. Depends on the length limit. Make it a pointer to
a dynamically allocated string.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-4-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
---
block/rbd.c | 91 ++++++++++---------------------------------------------------
1 file changed, 14 insertions(+), 77 deletions(-)
diff --git a/block/rbd.c b/block/rbd.c
index 5ba2a87..0fea348 100644
--- a/block/rbd.c
+++ b/block/rbd.c
@@ -56,11 +56,6 @@
#define OBJ_MAX_SIZE (1UL << OBJ_DEFAULT_OBJ_ORDER)
-#define RBD_MAX_CONF_NAME_SIZE 128
-#define RBD_MAX_CONF_VAL_SIZE 512
-#define RBD_MAX_CONF_SIZE 1024
-#define RBD_MAX_POOL_NAME_SIZE 128
-#define RBD_MAX_SNAP_NAME_SIZE 128
#define RBD_MAX_SNAPS 100
/* The LIBRBD_SUPPORTS_IOVEC is defined in librbd.h */
@@ -99,16 +94,12 @@ typedef struct BDRVRBDState {
rados_t cluster;
rados_ioctx_t io_ctx;
rbd_image_t image;
- char name[RBD_MAX_IMAGE_NAME_SIZE];
+ char *name;
char *snap;
} BDRVRBDState;
-static char *qemu_rbd_next_tok(int max_len,
- char *src, char delim,
- const char *name,
- char **p, Error **errp)
+static char *qemu_rbd_next_tok(char *src, char delim, char **p)
{
- int l;
char *end;
*p = NULL;
@@ -127,15 +118,6 @@ static char *qemu_rbd_next_tok(int max_len,
*end = '\0';
}
}
- l = strlen(src);
- if (l >= max_len) {
- error_setg(errp, "%s too long", name);
- return NULL;
- } else if (l == 0) {
- error_setg(errp, "%s too short", name);
- return NULL;
- }
-
return src;
}
@@ -159,7 +141,6 @@ static void qemu_rbd_parse_filename(const char *filename, QDict *options,
char *p, *buf, *keypairs;
char *found_str;
size_t max_keypair_size;
- Error *local_err = NULL;
if (!strstart(filename, "rbd:", &start)) {
error_setg(errp, "File name must start with 'rbd:'");
@@ -171,11 +152,7 @@ static void qemu_rbd_parse_filename(const char *filename, QDict *options,
keypairs = g_malloc0(max_keypair_size);
p = buf;
- found_str = qemu_rbd_next_tok(RBD_MAX_POOL_NAME_SIZE, p,
- '/', "pool name", &p, &local_err);
- if (local_err) {
- goto done;
- }
+ found_str = qemu_rbd_next_tok(p, '/', &p);
if (!p) {
error_setg(errp, "Pool name is required");
goto done;
@@ -184,27 +161,15 @@ static void qemu_rbd_parse_filename(const char *filename, QDict *options,
qdict_put(options, "pool", qstring_from_str(found_str));
if (strchr(p, '@')) {
- found_str = qemu_rbd_next_tok(RBD_MAX_IMAGE_NAME_SIZE, p,
- '@', "object name", &p, &local_err);
- if (local_err) {
- goto done;
- }
+ found_str = qemu_rbd_next_tok(p, '@', &p);
qemu_rbd_unescape(found_str);
qdict_put(options, "image", qstring_from_str(found_str));
- found_str = qemu_rbd_next_tok(RBD_MAX_SNAP_NAME_SIZE, p,
- ':', "snap name", &p, &local_err);
- if (local_err) {
- goto done;
- }
+ found_str = qemu_rbd_next_tok(p, ':', &p);
qemu_rbd_unescape(found_str);
qdict_put(options, "snapshot", qstring_from_str(found_str));
} else {
- found_str = qemu_rbd_next_tok(RBD_MAX_IMAGE_NAME_SIZE, p,
- ':', "object name", &p, &local_err);
- if (local_err) {
- goto done;
- }
+ found_str = qemu_rbd_next_tok(p, ':', &p);
qemu_rbd_unescape(found_str);
qdict_put(options, "image", qstring_from_str(found_str));
}
@@ -212,11 +177,7 @@ static void qemu_rbd_parse_filename(const char *filename, QDict *options,
goto done;
}
- found_str = qemu_rbd_next_tok(RBD_MAX_CONF_NAME_SIZE, p,
- '\0', "configuration", &p, &local_err);
- if (local_err) {
- goto done;
- }
+ found_str = qemu_rbd_next_tok(p, '\0', &p);
p = found_str;
@@ -224,12 +185,7 @@ static void qemu_rbd_parse_filename(const char *filename, QDict *options,
* 'id' and 'conf' a bit special. Key/value pairs may be in any order. */
while (p) {
char *name, *value;
- name = qemu_rbd_next_tok(RBD_MAX_CONF_NAME_SIZE, p,
- '=', "conf option name", &p, &local_err);
- if (local_err) {
- break;
- }
-
+ name = qemu_rbd_next_tok(p, '=', &p);
if (!p) {
error_setg(errp, "conf option %s has no value", name);
break;
@@ -237,11 +193,7 @@ static void qemu_rbd_parse_filename(const char *filename, QDict *options,
qemu_rbd_unescape(name);
- value = qemu_rbd_next_tok(RBD_MAX_CONF_VAL_SIZE, p,
- ':', "conf option value", &p, &local_err);
- if (local_err) {
- break;
- }
+ value = qemu_rbd_next_tok(p, ':', &p);
qemu_rbd_unescape(value);
if (!strcmp(name, "conf")) {
@@ -274,9 +226,6 @@ static void qemu_rbd_parse_filename(const char *filename, QDict *options,
done:
- if (local_err) {
- error_propagate(errp, local_err);
- }
g_free(buf);
g_free(keypairs);
return;
@@ -308,30 +257,20 @@ static int qemu_rbd_set_keypairs(rados_t cluster, const char *keypairs,
char *p, *buf;
char *name;
char *value;
- Error *local_err = NULL;
int ret = 0;
buf = g_strdup(keypairs);
p = buf;
while (p) {
- name = qemu_rbd_next_tok(RBD_MAX_CONF_NAME_SIZE, p,
- '=', "conf option name", &p, &local_err);
- if (local_err) {
- break;
- }
-
+ name = qemu_rbd_next_tok(p, '=', &p);
if (!p) {
error_setg(errp, "conf option %s has no value", name);
ret = -EINVAL;
break;
}
- value = qemu_rbd_next_tok(RBD_MAX_CONF_VAL_SIZE, p,
- ':', "conf option value", &p, &local_err);
- if (local_err) {
- break;
- }
+ value = qemu_rbd_next_tok(p, ':', &p);
ret = rados_conf_set(cluster, name, value);
if (ret < 0) {
@@ -341,10 +280,6 @@ static int qemu_rbd_set_keypairs(rados_t cluster, const char *keypairs,
}
}
- if (local_err) {
- error_propagate(errp, local_err);
- ret = -EINVAL;
- }
g_free(buf);
return ret;
}
@@ -724,7 +659,7 @@ static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags,
}
s->snap = g_strdup(snap);
- pstrcpy(s->name, RBD_MAX_IMAGE_NAME_SIZE, name);
+ s->name = g_strdup(name);
/* try default location when conf=NULL, but ignore failure */
r = rados_conf_read_file(s->cluster, conf);
@@ -798,6 +733,7 @@ failed_open:
failed_shutdown:
rados_shutdown(s->cluster);
g_free(s->snap);
+ g_free(s->name);
failed_opts:
qemu_opts_del(opts);
g_free(mon_host);
@@ -812,6 +748,7 @@ static void qemu_rbd_close(BlockDriverState *bs)
rbd_close(s->image);
rados_ioctx_destroy(s->io_ctx);
g_free(s->snap);
+ g_free(s->name);
rados_shutdown(s->cluster);
}
--
2.9.3
^ permalink raw reply related [flat|nested] 12+ messages in thread* [Qemu-devel] [PULL for-2.9 04/10] rbd: Clean up after the previous commit
2017-03-28 14:05 [Qemu-devel] [PULL for-2.9 00/10] Block patches for -rc2 Jeff Cody
` (2 preceding siblings ...)
2017-03-28 14:05 ` [Qemu-devel] [PULL for-2.9 03/10] rbd: Don't limit length of parameter values Jeff Cody
@ 2017-03-28 14:05 ` Jeff Cody
2017-03-28 14:05 ` [Qemu-devel] [PULL for-2.9 05/10] rbd: Don't accept -drive driver=rbd, keyvalue-pairs= Jeff Cody
` (6 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Jeff Cody @ 2017-03-28 14:05 UTC (permalink / raw)
To: qemu-block; +Cc: peter.maydell, jcody, armbru, qemu-devel
From: Markus Armbruster <armbru@redhat.com>
This code in qemu_rbd_parse_filename()
found_str = qemu_rbd_next_tok(p, '\0', &p);
p = found_str;
has no effect. Drop it, and simplify qemu_rbd_next_tok().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-5-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
---
block/rbd.c | 24 +++++++++---------------
1 file changed, 9 insertions(+), 15 deletions(-)
diff --git a/block/rbd.c b/block/rbd.c
index 0fea348..182a5a3 100644
--- a/block/rbd.c
+++ b/block/rbd.c
@@ -104,19 +104,17 @@ static char *qemu_rbd_next_tok(char *src, char delim, char **p)
*p = NULL;
- if (delim != '\0') {
- for (end = src; *end; ++end) {
- if (*end == delim) {
- break;
- }
- if (*end == '\\' && end[1] != '\0') {
- end++;
- }
- }
+ for (end = src; *end; ++end) {
if (*end == delim) {
- *p = end + 1;
- *end = '\0';
+ break;
}
+ if (*end == '\\' && end[1] != '\0') {
+ end++;
+ }
+ }
+ if (*end == delim) {
+ *p = end + 1;
+ *end = '\0';
}
return src;
}
@@ -177,10 +175,6 @@ static void qemu_rbd_parse_filename(const char *filename, QDict *options,
goto done;
}
- found_str = qemu_rbd_next_tok(p, '\0', &p);
-
- p = found_str;
-
/* The following are essentially all key/value pairs, and we treat
* 'id' and 'conf' a bit special. Key/value pairs may be in any order. */
while (p) {
--
2.9.3
^ permalink raw reply related [flat|nested] 12+ messages in thread* [Qemu-devel] [PULL for-2.9 05/10] rbd: Don't accept -drive driver=rbd, keyvalue-pairs=...
2017-03-28 14:05 [Qemu-devel] [PULL for-2.9 00/10] Block patches for -rc2 Jeff Cody
` (3 preceding siblings ...)
2017-03-28 14:05 ` [Qemu-devel] [PULL for-2.9 04/10] rbd: Clean up after the previous commit Jeff Cody
@ 2017-03-28 14:05 ` Jeff Cody
2017-03-28 14:05 ` [Qemu-devel] [PULL for-2.9 06/10] rbd: Clean up runtime_opts, fix -drive to reject filename Jeff Cody
` (5 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Jeff Cody @ 2017-03-28 14:05 UTC (permalink / raw)
To: qemu-block; +Cc: peter.maydell, jcody, armbru, qemu-devel
From: Markus Armbruster <armbru@redhat.com>
The way we communicate extra key-value pairs from
qemu_rbd_parse_filename() to qemu_rbd_open() exposes option parameter
"keyvalue-pairs" on the command line. It's not wanted there. Hack:
rename the parameter to "=keyvalue-pairs" to make it inaccessible.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-6-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
---
block/rbd.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/block/rbd.c b/block/rbd.c
index 182a5a3..2632533 100644
--- a/block/rbd.c
+++ b/block/rbd.c
@@ -215,7 +215,7 @@ static void qemu_rbd_parse_filename(const char *filename, QDict *options,
}
if (keypairs[0]) {
- qdict_put(options, "keyvalue-pairs", qstring_from_str(keypairs));
+ qdict_put(options, "=keyvalue-pairs", qstring_from_str(keypairs));
}
@@ -330,7 +330,11 @@ static QemuOptsList runtime_opts = {
.help = "Rados id name",
},
{
- .name = "keyvalue-pairs",
+ /*
+ * HACK: name starts with '=' so that qemu_opts_parse()
+ * can't set it
+ */
+ .name = "=keyvalue-pairs",
.type = QEMU_OPT_STRING,
.help = "Legacy rados key/value option parameters",
},
@@ -405,7 +409,7 @@ static int qemu_rbd_create(const char *filename, QemuOpts *opts, Error **errp)
conf = qemu_opt_get(rbd_opts, "conf");
clientname = qemu_opt_get(rbd_opts, "user");
name = qemu_opt_get(rbd_opts, "image");
- keypairs = qemu_opt_get(rbd_opts, "keyvalue-pairs");
+ keypairs = qemu_opt_get(rbd_opts, "=keyvalue-pairs");
ret = rados_create(&cluster, clientname);
if (ret < 0) {
@@ -638,7 +642,7 @@ static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags,
snap = qemu_opt_get(opts, "snapshot");
clientname = qemu_opt_get(opts, "user");
name = qemu_opt_get(opts, "image");
- keypairs = qemu_opt_get(opts, "keyvalue-pairs");
+ keypairs = qemu_opt_get(opts, "=keyvalue-pairs");
if (!pool || !name) {
error_setg(errp, "Parameters 'pool' and 'image' are required");
--
2.9.3
^ permalink raw reply related [flat|nested] 12+ messages in thread* [Qemu-devel] [PULL for-2.9 06/10] rbd: Clean up runtime_opts, fix -drive to reject filename
2017-03-28 14:05 [Qemu-devel] [PULL for-2.9 00/10] Block patches for -rc2 Jeff Cody
` (4 preceding siblings ...)
2017-03-28 14:05 ` [Qemu-devel] [PULL for-2.9 05/10] rbd: Don't accept -drive driver=rbd, keyvalue-pairs= Jeff Cody
@ 2017-03-28 14:05 ` Jeff Cody
2017-03-28 14:05 ` [Qemu-devel] [PULL for-2.9 07/10] rbd: Clean up qemu_rbd_create()'s detour through QemuOpts Jeff Cody
` (4 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Jeff Cody @ 2017-03-28 14:05 UTC (permalink / raw)
To: qemu-block; +Cc: peter.maydell, jcody, armbru, qemu-devel
From: Markus Armbruster <armbru@redhat.com>
runtime_opts is used for three different purposes:
* qemu_rbd_open() uses it to accept options it recognizes, such as
"pool" and "image". Other .bdrv_open() methods do it similarly.
* qemu_rbd_open() accepts additional list-valued options
auth-supported and server, with the help of qemu_rbd_array_opts().
The list elements are again dictionaries. qemu_rbd_array_opts()
uses runtime_opts to accept their members. Thus, runtime_opts
contains recognized sub-sub-options "auth", "host", "port" in
addition to recognized options. No other block driver does that.
* qemu_rbd_create() uses it to convert the QDict produced by
qemu_rbd_parse_filename() to QemuOpts. No other block driver does
that. The keys produced by qemu_rbd_parse_filename() are "pool",
"image", "snapshot", "conf", "user" and "keyvalue-pairs".
qemu_rbd_open() accepts these, so no additional ones here.
This is a confusing mess. Dates back to commit 0f9d252. First step
to clean it up is documenting runtime_opts.desc[]:
* Reorder entries to match the QAPI schema, like we do in other block
drivers.
* Document why the schema's "server" and "auth-supported" aren't in
.desc[].
* Document why "keyvalue-pairs", "host", "port" and "auth" are in
.desc[], but not the schema.
* Delete "filename", because none of the three users actually uses it.
This fixes -drive to reject parameter filename instead of silently
ignoring it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-7-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
---
block/rbd.c | 40 +++++++++++++++++++++++++---------------
1 file changed, 25 insertions(+), 15 deletions(-)
diff --git a/block/rbd.c b/block/rbd.c
index 2632533..b2afe07 100644
--- a/block/rbd.c
+++ b/block/rbd.c
@@ -294,21 +294,6 @@ static QemuOptsList runtime_opts = {
.head = QTAILQ_HEAD_INITIALIZER(runtime_opts.head),
.desc = {
{
- .name = "filename",
- .type = QEMU_OPT_STRING,
- .help = "Specification of the rbd image",
- },
- {
- .name = "password-secret",
- .type = QEMU_OPT_STRING,
- .help = "ID of secret providing the password",
- },
- {
- .name = "conf",
- .type = QEMU_OPT_STRING,
- .help = "Rados config file location",
- },
- {
.name = "pool",
.type = QEMU_OPT_STRING,
.help = "Rados pool name",
@@ -319,6 +304,11 @@ static QemuOptsList runtime_opts = {
.help = "Image name in the pool",
},
{
+ .name = "conf",
+ .type = QEMU_OPT_STRING,
+ .help = "Rados config file location",
+ },
+ {
.name = "snapshot",
.type = QEMU_OPT_STRING,
.help = "Ceph snapshot name",
@@ -329,6 +319,19 @@ static QemuOptsList runtime_opts = {
.type = QEMU_OPT_STRING,
.help = "Rados id name",
},
+ /*
+ * server.* and auth-supported.* extracted manually, see
+ * qemu_rbd_array_opts()
+ */
+ {
+ .name = "password-secret",
+ .type = QEMU_OPT_STRING,
+ .help = "ID of secret providing the password",
+ },
+
+ /*
+ * Keys for qemu_rbd_parse_filename(), not in the QAPI schema
+ */
{
/*
* HACK: name starts with '=' so that qemu_opts_parse()
@@ -338,6 +341,13 @@ static QemuOptsList runtime_opts = {
.type = QEMU_OPT_STRING,
.help = "Legacy rados key/value option parameters",
},
+
+ /*
+ * The remainder aren't option keys, but option sub-sub-keys,
+ * so that qemu_rbd_array_opts() can abuse runtime_opts for
+ * its own purposes
+ * TODO clean this up
+ */
{
.name = "host",
.type = QEMU_OPT_STRING,
--
2.9.3
^ permalink raw reply related [flat|nested] 12+ messages in thread* [Qemu-devel] [PULL for-2.9 07/10] rbd: Clean up qemu_rbd_create()'s detour through QemuOpts
2017-03-28 14:05 [Qemu-devel] [PULL for-2.9 00/10] Block patches for -rc2 Jeff Cody
` (5 preceding siblings ...)
2017-03-28 14:05 ` [Qemu-devel] [PULL for-2.9 06/10] rbd: Clean up runtime_opts, fix -drive to reject filename Jeff Cody
@ 2017-03-28 14:05 ` Jeff Cody
2017-03-28 14:05 ` [Qemu-devel] [PULL for-2.9 08/10] rbd: Revert -blockdev and -drive parameter auth-supported Jeff Cody
` (3 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Jeff Cody @ 2017-03-28 14:05 UTC (permalink / raw)
To: qemu-block; +Cc: peter.maydell, jcody, armbru, qemu-devel
From: Markus Armbruster <armbru@redhat.com>
The conversion from QDict to QemuOpts is pointless. Simply get the
stuff straight from the QDict.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-8-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
---
block/rbd.c | 20 +++++---------------
1 file changed, 5 insertions(+), 15 deletions(-)
diff --git a/block/rbd.c b/block/rbd.c
index b2afe07..16ea60a 100644
--- a/block/rbd.c
+++ b/block/rbd.c
@@ -376,7 +376,6 @@ static int qemu_rbd_create(const char *filename, QemuOpts *opts, Error **errp)
rados_t cluster;
rados_ioctx_t io_ctx;
QDict *options = NULL;
- QemuOpts *rbd_opts = NULL;
int ret = 0;
secretid = qemu_opt_get(opts, "password-secret");
@@ -407,19 +406,11 @@ static int qemu_rbd_create(const char *filename, QemuOpts *opts, Error **errp)
goto exit;
}
- rbd_opts = qemu_opts_create(&runtime_opts, NULL, 0, &error_abort);
- qemu_opts_absorb_qdict(rbd_opts, options, &local_err);
- if (local_err) {
- error_propagate(errp, local_err);
- ret = -EINVAL;
- goto exit;
- }
-
- pool = qemu_opt_get(rbd_opts, "pool");
- conf = qemu_opt_get(rbd_opts, "conf");
- clientname = qemu_opt_get(rbd_opts, "user");
- name = qemu_opt_get(rbd_opts, "image");
- keypairs = qemu_opt_get(rbd_opts, "=keyvalue-pairs");
+ pool = qdict_get_try_str(options, "pool");
+ conf = qdict_get_try_str(options, "conf");
+ clientname = qdict_get_try_str(options, "user");
+ name = qdict_get_try_str(options, "image");
+ keypairs = qdict_get_try_str(options, "=keyvalue-pairs");
ret = rados_create(&cluster, clientname);
if (ret < 0) {
@@ -470,7 +461,6 @@ shutdown:
exit:
QDECREF(options);
- qemu_opts_del(rbd_opts);
return ret;
}
--
2.9.3
^ permalink raw reply related [flat|nested] 12+ messages in thread* [Qemu-devel] [PULL for-2.9 08/10] rbd: Revert -blockdev and -drive parameter auth-supported
2017-03-28 14:05 [Qemu-devel] [PULL for-2.9 00/10] Block patches for -rc2 Jeff Cody
` (6 preceding siblings ...)
2017-03-28 14:05 ` [Qemu-devel] [PULL for-2.9 07/10] rbd: Clean up qemu_rbd_create()'s detour through QemuOpts Jeff Cody
@ 2017-03-28 14:05 ` Jeff Cody
2017-03-28 14:05 ` [Qemu-devel] [PULL for-2.9 09/10] rbd: Revert -blockdev parameter password-secret Jeff Cody
` (2 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Jeff Cody @ 2017-03-28 14:05 UTC (permalink / raw)
To: qemu-block; +Cc: peter.maydell, jcody, armbru, qemu-devel
From: Markus Armbruster <armbru@redhat.com>
This reverts half of commit 0a55679. We're having second thoughts on
the QAPI schema (and thus the external interface), and haven't reached
consensus, yet. Issues include:
* The implementation uses deprecated rados_conf_set() key
"auth_supported". No biggie.
* The implementation makes -drive silently ignore invalid parameters
"auth" and "auth-supported.*.X" where X isn't "auth". Fixable (in
fact I'm going to fix similar bugs around parameter server), so
again no biggie.
* BlockdevOptionsRbd member @password-secret applies only to
authentication method cephx. Should it be a variant member of
RbdAuthMethod?
* BlockdevOptionsRbd member @user could apply to both methods cephx
and none, but I'm not sure it's actually used with none. If it
isn't, should it be a variant member of RbdAuthMethod?
* The client offers a *set* of authentication methods, not a list.
Should the methods be optional members of BlockdevOptionsRbd instead
of members of list @auth-supported? The latter begs the question
what multiple entries for the same method mean. Trivial question
now that RbdAuthMethod contains nothing but @type, but less so when
RbdAuthMethod acquires other members, such the ones discussed above.
* How BlockdevOptionsRbd member @auth-supported interacts with
settings from a configuration file specified with @conf is
undocumented. I suspect it's untested, too.
Let's avoid painting ourselves into a corner now, and revert the
feature for 2.9.
Note that users can still configure authentication methods with a
configuration file. They probably do that anyway if they use Ceph
outside QEMU as well.
Further note that this doesn't affect use of key "auth-supported" in
-drive file=rbd:...:key=value.
qemu_rbd_array_opts()'s parameter @type now must be RBD_MON_HOST,
which is silly. This will be cleaned up shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-9-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
---
block/rbd.c | 31 +++----------------------------
qapi/block-core.json | 24 ------------------------
2 files changed, 3 insertions(+), 52 deletions(-)
diff --git a/block/rbd.c b/block/rbd.c
index 16ea60a..485cef4 100644
--- a/block/rbd.c
+++ b/block/rbd.c
@@ -320,8 +320,7 @@ static QemuOptsList runtime_opts = {
.help = "Rados id name",
},
/*
- * server.* and auth-supported.* extracted manually, see
- * qemu_rbd_array_opts()
+ * server.* extracted manually, see qemu_rbd_array_opts()
*/
{
.name = "password-secret",
@@ -356,11 +355,6 @@ static QemuOptsList runtime_opts = {
.name = "port",
.type = QEMU_OPT_STRING,
},
- {
- .name = "auth",
- .type = QEMU_OPT_STRING,
- .help = "Supported authentication method, either cephx or none",
- },
{ /* end of list */ }
},
};
@@ -512,7 +506,6 @@ static void qemu_rbd_complete_aio(RADOSCB *rcb)
}
#define RBD_MON_HOST 0
-#define RBD_AUTH_SUPPORTED 1
static char *qemu_rbd_array_opts(QDict *options, const char *prefix, int type,
Error **errp)
@@ -527,7 +520,7 @@ static char *qemu_rbd_array_opts(QDict *options, const char *prefix, int type,
Error *local_err = NULL;
int i;
- assert(type == RBD_MON_HOST || type == RBD_AUTH_SUPPORTED);
+ assert(type == RBD_MON_HOST);
num_entries = qdict_array_entries(options, prefix);
@@ -573,10 +566,9 @@ static char *qemu_rbd_array_opts(QDict *options, const char *prefix, int type,
value = strbuf;
}
} else {
- value = qemu_opt_get(opts, "auth");
+ abort();
}
-
/* each iteration in the for loop will build upon the string, and if
* rados_str is NULL then it is our first pass */
if (rados_str) {
@@ -608,7 +600,6 @@ static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags,
QemuOpts *opts;
Error *local_err = NULL;
char *mon_host = NULL;
- char *auth_supported = NULL;
int r;
opts = qemu_opts_create(&runtime_opts, NULL, 0, &error_abort);
@@ -619,14 +610,6 @@ static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags,
return -EINVAL;
}
- auth_supported = qemu_rbd_array_opts(options, "auth-supported.",
- RBD_AUTH_SUPPORTED, &local_err);
- if (local_err) {
- error_propagate(errp, local_err);
- r = -EINVAL;
- goto failed_opts;
- }
-
mon_host = qemu_rbd_array_opts(options, "server.",
RBD_MON_HOST, &local_err);
if (local_err) {
@@ -678,13 +661,6 @@ static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags,
}
}
- if (auth_supported) {
- r = rados_conf_set(s->cluster, "auth_supported", auth_supported);
- if (r < 0) {
- goto failed_shutdown;
- }
- }
-
if (qemu_rbd_set_auth(s->cluster, secretid, errp) < 0) {
r = -EIO;
goto failed_shutdown;
@@ -735,7 +711,6 @@ failed_shutdown:
failed_opts:
qemu_opts_del(opts);
g_free(mon_host);
- g_free(auth_supported);
return r;
}
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 5d2efe4..6a7ca0b 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -2601,27 +2601,6 @@
##
-# @RbdAuthSupport:
-#
-# An enumeration of RBD auth support
-#
-# Since: 2.9
-##
-{ 'enum': 'RbdAuthSupport',
- 'data': [ 'cephx', 'none' ] }
-
-
-##
-# @RbdAuthMethod:
-#
-# An enumeration of rados auth_supported types
-#
-# Since: 2.9
-##
-{ 'struct': 'RbdAuthMethod',
- 'data': { 'auth': 'RbdAuthSupport' } }
-
-##
# @BlockdevOptionsRbd:
#
# @pool: Ceph pool name.
@@ -2639,8 +2618,6 @@
# @server: Monitor host address and port. This maps
# to the "mon_host" Ceph option.
#
-# @auth-supported: Authentication supported.
-#
# @password-secret: The ID of a QCryptoSecret object providing
# the password for the login.
#
@@ -2653,7 +2630,6 @@
'*snapshot': 'str',
'*user': 'str',
'*server': ['InetSocketAddressBase'],
- '*auth-supported': ['RbdAuthMethod'],
'*password-secret': 'str' } }
##
--
2.9.3
^ permalink raw reply related [flat|nested] 12+ messages in thread* [Qemu-devel] [PULL for-2.9 09/10] rbd: Revert -blockdev parameter password-secret
2017-03-28 14:05 [Qemu-devel] [PULL for-2.9 00/10] Block patches for -rc2 Jeff Cody
` (7 preceding siblings ...)
2017-03-28 14:05 ` [Qemu-devel] [PULL for-2.9 08/10] rbd: Revert -blockdev and -drive parameter auth-supported Jeff Cody
@ 2017-03-28 14:05 ` Jeff Cody
2017-03-28 14:05 ` [Qemu-devel] [PULL for-2.9 10/10] rbd: Fix bugs around -drive parameter "server" Jeff Cody
2017-03-28 16:16 ` [Qemu-devel] [PULL for-2.9 00/10] Block patches for -rc2 Peter Maydell
10 siblings, 0 replies; 12+ messages in thread
From: Jeff Cody @ 2017-03-28 14:05 UTC (permalink / raw)
To: qemu-block; +Cc: peter.maydell, jcody, armbru, qemu-devel
From: Markus Armbruster <armbru@redhat.com>
This reverts a part of commit 8a47e8e. We're having second thoughts
on the QAPI schema (and thus the external interface), and haven't
reached consensus, yet. Issues include:
* BlockdevOptionsRbd member @password-secret isn't actually a
password, it's a key generated by Ceph.
* We're not sure where member @password-secret belongs (see the
previous commit).
* How @password-secret interacts with settings from a configuration
file specified with @conf is undocumented.
Let's avoid painting ourselves into a corner now, and revert the
feature for 2.9.
Note that users can still configure an authentication key with a
configuration file. They probably do that anyway if they use Ceph
outside QEMU as well.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-10-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
---
qapi/block-core.json | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 6a7ca0b..78eb8fb 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -2618,9 +2618,6 @@
# @server: Monitor host address and port. This maps
# to the "mon_host" Ceph option.
#
-# @password-secret: The ID of a QCryptoSecret object providing
-# the password for the login.
-#
# Since: 2.9
##
{ 'struct': 'BlockdevOptionsRbd',
@@ -2629,8 +2626,7 @@
'*conf': 'str',
'*snapshot': 'str',
'*user': 'str',
- '*server': ['InetSocketAddressBase'],
- '*password-secret': 'str' } }
+ '*server': ['InetSocketAddressBase'] } }
##
# @BlockdevOptionsSheepdog:
--
2.9.3
^ permalink raw reply related [flat|nested] 12+ messages in thread* [Qemu-devel] [PULL for-2.9 10/10] rbd: Fix bugs around -drive parameter "server"
2017-03-28 14:05 [Qemu-devel] [PULL for-2.9 00/10] Block patches for -rc2 Jeff Cody
` (8 preceding siblings ...)
2017-03-28 14:05 ` [Qemu-devel] [PULL for-2.9 09/10] rbd: Revert -blockdev parameter password-secret Jeff Cody
@ 2017-03-28 14:05 ` Jeff Cody
2017-03-28 16:16 ` [Qemu-devel] [PULL for-2.9 00/10] Block patches for -rc2 Peter Maydell
10 siblings, 0 replies; 12+ messages in thread
From: Jeff Cody @ 2017-03-28 14:05 UTC (permalink / raw)
To: qemu-block; +Cc: peter.maydell, jcody, armbru, qemu-devel
From: Markus Armbruster <armbru@redhat.com>
qemu_rbd_open() takes option parameters as a flattened QDict, with
keys of the form server.%d.host, server.%d.port, where %d counts up
from zero.
qemu_rbd_array_opts() extracts these values as follows. First, it
calls qdict_array_entries() to find the list's length. For each list
element, it formats the list's key prefix (e.g. "server.0."), then
creates a new QDict holding the options with that key prefix, then
converts that to a QemuOpts, so it can finally get the member values
from there.
If there's one surefire way to make code using QDict more awkward,
it's creating more of them and mixing in QemuOpts for good measure.
The extraction of keys starting with server.%d into another QDict
makes us ignore parameters like server.0.neither-host-nor-port
silently.
The conversion to QemuOpts abuses runtime_opts, as described a few
commits ago.
Rewrite to simply get the values straight from the options QDict.
Fixes -drive not to crash when server.*.* are present, but
server.*.host is absent.
Fixes -drive to reject invalid server.*.*.
Permits cleaning up runtime_opts. Do that, and fix -drive to reject
bogus parameters host and port instead of silently ignoring them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-11-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
---
block/rbd.c | 127 +++++++++++++++---------------------------------------------
1 file changed, 32 insertions(+), 95 deletions(-)
diff --git a/block/rbd.c b/block/rbd.c
index 485cef4..498322b 100644
--- a/block/rbd.c
+++ b/block/rbd.c
@@ -13,6 +13,7 @@
#include "qemu/osdep.h"
+#include <rbd/librbd.h>
#include "qapi/error.h"
#include "qemu/error-report.h"
#include "block/block_int.h"
@@ -20,8 +21,6 @@
#include "qemu/cutils.h"
#include "qapi/qmp/qstring.h"
-#include <rbd/librbd.h>
-
/*
* When specifying the image filename use:
*
@@ -320,7 +319,7 @@ static QemuOptsList runtime_opts = {
.help = "Rados id name",
},
/*
- * server.* extracted manually, see qemu_rbd_array_opts()
+ * server.* extracted manually, see qemu_rbd_mon_host()
*/
{
.name = "password-secret",
@@ -340,21 +339,6 @@ static QemuOptsList runtime_opts = {
.type = QEMU_OPT_STRING,
.help = "Legacy rados key/value option parameters",
},
-
- /*
- * The remainder aren't option keys, but option sub-sub-keys,
- * so that qemu_rbd_array_opts() can abuse runtime_opts for
- * its own purposes
- * TODO clean this up
- */
- {
- .name = "host",
- .type = QEMU_OPT_STRING,
- },
- {
- .name = "port",
- .type = QEMU_OPT_STRING,
- },
{ /* end of list */ }
},
};
@@ -505,89 +489,43 @@ static void qemu_rbd_complete_aio(RADOSCB *rcb)
qemu_aio_unref(acb);
}
-#define RBD_MON_HOST 0
-
-static char *qemu_rbd_array_opts(QDict *options, const char *prefix, int type,
- Error **errp)
+static char *qemu_rbd_mon_host(QDict *options, Error **errp)
{
- int num_entries;
- QemuOpts *opts = NULL;
- QDict *sub_options;
- const char *host;
- const char *port;
- char *str;
- char *rados_str = NULL;
- Error *local_err = NULL;
+ const char **vals = g_new(const char *, qdict_size(options) + 1);
+ char keybuf[32];
+ const char *host, *port;
+ char *rados_str;
int i;
- assert(type == RBD_MON_HOST);
-
- num_entries = qdict_array_entries(options, prefix);
-
- if (num_entries < 0) {
- error_setg(errp, "Parse error on RBD QDict array");
- return NULL;
- }
-
- for (i = 0; i < num_entries; i++) {
- char *strbuf = NULL;
- const char *value;
- char *rados_str_tmp;
-
- str = g_strdup_printf("%s%d.", prefix, i);
- qdict_extract_subqdict(options, &sub_options, str);
- g_free(str);
-
- opts = qemu_opts_create(&runtime_opts, NULL, 0, &error_abort);
- qemu_opts_absorb_qdict(opts, sub_options, &local_err);
- QDECREF(sub_options);
- if (local_err) {
- error_propagate(errp, local_err);
- g_free(rados_str);
+ for (i = 0;; i++) {
+ sprintf(keybuf, "server.%d.host", i);
+ host = qdict_get_try_str(options, keybuf);
+ qdict_del(options, keybuf);
+ sprintf(keybuf, "server.%d.port", i);
+ port = qdict_get_try_str(options, keybuf);
+ qdict_del(options, keybuf);
+ if (!host && !port) {
+ break;
+ }
+ if (!host) {
+ error_setg(errp, "Parameter server.%d.host is missing", i);
rados_str = NULL;
- goto exit;
+ goto out;
}
- if (type == RBD_MON_HOST) {
- host = qemu_opt_get(opts, "host");
- port = qemu_opt_get(opts, "port");
-
- value = host;
- if (port) {
- /* check for ipv6 */
- if (strchr(host, ':')) {
- strbuf = g_strdup_printf("[%s]:%s", host, port);
- } else {
- strbuf = g_strdup_printf("%s:%s", host, port);
- }
- value = strbuf;
- } else if (strchr(host, ':')) {
- strbuf = g_strdup_printf("[%s]", host);
- value = strbuf;
- }
+ if (strchr(host, ':')) {
+ vals[i] = port ? g_strdup_printf("[%s]:%s", host, port)
+ : g_strdup_printf("[%s]", host);
} else {
- abort();
+ vals[i] = port ? g_strdup_printf("%s:%s", host, port)
+ : g_strdup(host);
}
-
- /* each iteration in the for loop will build upon the string, and if
- * rados_str is NULL then it is our first pass */
- if (rados_str) {
- /* separate options with ';', as that is what rados_conf_set()
- * requires */
- rados_str_tmp = rados_str;
- rados_str = g_strdup_printf("%s;%s", rados_str_tmp, value);
- g_free(rados_str_tmp);
- } else {
- rados_str = g_strdup(value);
- }
-
- g_free(strbuf);
- qemu_opts_del(opts);
- opts = NULL;
}
+ vals[i] = NULL;
-exit:
- qemu_opts_del(opts);
+ rados_str = i ? g_strjoinv(";", (char **)vals) : NULL;
+out:
+ g_strfreev((char **)vals);
return rados_str;
}
@@ -606,12 +544,11 @@ static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags,
qemu_opts_absorb_qdict(opts, options, &local_err);
if (local_err) {
error_propagate(errp, local_err);
- qemu_opts_del(opts);
- return -EINVAL;
+ r = -EINVAL;
+ goto failed_opts;
}
- mon_host = qemu_rbd_array_opts(options, "server.",
- RBD_MON_HOST, &local_err);
+ mon_host = qemu_rbd_mon_host(options, &local_err);
if (local_err) {
error_propagate(errp, local_err);
r = -EINVAL;
--
2.9.3
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [Qemu-devel] [PULL for-2.9 00/10] Block patches for -rc2
2017-03-28 14:05 [Qemu-devel] [PULL for-2.9 00/10] Block patches for -rc2 Jeff Cody
` (9 preceding siblings ...)
2017-03-28 14:05 ` [Qemu-devel] [PULL for-2.9 10/10] rbd: Fix bugs around -drive parameter "server" Jeff Cody
@ 2017-03-28 16:16 ` Peter Maydell
10 siblings, 0 replies; 12+ messages in thread
From: Peter Maydell @ 2017-03-28 16:16 UTC (permalink / raw)
To: Jeff Cody; +Cc: Qemu-block, Markus Armbruster, QEMU Developers
On 28 March 2017 at 15:05, Jeff Cody <jcody@redhat.com> wrote:
> The following changes since commit 142b9ca51d7260d20f6e87bd7f2020ac0a7d95d9:
>
> Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging (2017-03-28 11:10:36 +0100)
>
> are available in the git repository at:
>
> git://github.com/codyprime/qemu-kvm-jtc.git tags/block-pull-request
>
> for you to fetch changes up to 2836284db603775af557e969d5a800efb0190324:
>
> rbd: Fix bugs around -drive parameter "server" (2017-03-28 10:01:21 -0400)
>
> ----------------------------------------------------------------
> Block patches for 2.9-rc2
> ----------------------------------------------------------------
>
> Markus Armbruster (10):
> rbd: Reject -blockdev server.*.{numeric, to, ipv4, ipv6}
> rbd: Fix to cleanly reject -drive without pool or image
> rbd: Don't limit length of parameter values
> rbd: Clean up after the previous commit
> rbd: Don't accept -drive driver=rbd, keyvalue-pairs=...
> rbd: Clean up runtime_opts, fix -drive to reject filename
> rbd: Clean up qemu_rbd_create()'s detour through QemuOpts
> rbd: Revert -blockdev and -drive parameter auth-supported
> rbd: Revert -blockdev parameter password-secret
> rbd: Fix bugs around -drive parameter "server"
>
> block/rbd.c | 319 ++++++++++++++-------------------------------------
> qapi-schema.json | 21 ++--
> qapi/block-core.json | 30 +----
> 3 files changed, 100 insertions(+), 270 deletions(-)
Applied, thanks.
-- PMM
^ permalink raw reply [flat|nested] 12+ messages in thread