[PATCH v3 0/5] ATA/ARM: convert ARM/DaVinci to use libata PATA drivers

[PATCH v3 0/5] ATA/ARM: convert ARM/DaVinci to use libata PATA drivers

[Bartlomiej Zolnierkiewicz]

Hi,

This patchset adds Palmchip BK3710 IDE controller driver to
libata and switches ARM/DaVinci to use it (instead of the old
IDE driver).

Sekhar, please check that it still works after changes, thanks.

Changes since v2
(https://www.spinics.net/lists/arm-kernel/msg568597.html):
- fixed 'checkpatch.pl --strict' issues reported by Sekhar
- added chipset initialization fixups in the new patches #2-3
  (based on the review comments from Sergei)

Changes since v1
(https://www.spinics.net/lists/arm-kernel/msg567442.html):
- addressed review comments from Sergei Shtylyov
- fixed cycle_time unitialized variable issue

Changes since v0.1 draft patch version
(https://www.spinics.net/lists/arm-kernel/msg566932.html):
- fixed cycle_time build warning
- added platform support fixes from Sekhar
- added defconfig changes from Sekhar
- preserved platform support for the old IDE driver
- split it on 3 patches

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics


Bartlomiej Zolnierkiewicz (3):
  ata: add Palmchip BK3710 PATA controller driver
  pata_bk3710: disable IORDY Timer on chipset initialization
  pata_bk3710: clear status bits of BMISP on chipset initialization

Sekhar Nori (2):
  ARM: davinci: add pata_bk3710 libata driver support
  ARM: davinci_all_defconfig: convert to use libata PATA

 arch/arm/configs/davinci_all_defconfig    |   4 +-
 arch/arm/mach-davinci/board-dm644x-evm.c  |   3 +-
 arch/arm/mach-davinci/board-dm646x-evm.c  |   3 +-
 arch/arm/mach-davinci/board-neuros-osd2.c |   3 +-
 drivers/ata/Kconfig                       |   9 +
 drivers/ata/Makefile                      |   1 +
 drivers/ata/pata_bk3710.c                 | 382 ++++++++++++++++++++++++++++++
 7 files changed, 399 insertions(+), 6 deletions(-)
 create mode 100644 drivers/ata/pata_bk3710.c

-- 
1.9.1

[PATCH v3 0/5] ATA/ARM: convert ARM/DaVinci to use libata PATA drivers

[Bartlomiej Zolnierkiewicz]

Hi,

This patchset adds Palmchip BK3710 IDE controller driver to
libata and switches ARM/DaVinci to use it (instead of the old
IDE driver).

Sekhar, please check that it still works after changes, thanks.

Changes since v2
(https://www.spinics.net/lists/arm-kernel/msg568597.html):
- fixed 'checkpatch.pl --strict' issues reported by Sekhar
- added chipset initialization fixups in the new patches #2-3
  (based on the review comments from Sergei)

Changes since v1
(https://www.spinics.net/lists/arm-kernel/msg567442.html):
- addressed review comments from Sergei Shtylyov
- fixed cycle_time unitialized variable issue

Changes since v0.1 draft patch version
(https://www.spinics.net/lists/arm-kernel/msg566932.html):
- fixed cycle_time build warning
- added platform support fixes from Sekhar
- added defconfig changes from Sekhar
- preserved platform support for the old IDE driver
- split it on 3 patches

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics


Bartlomiej Zolnierkiewicz (3):
  ata: add Palmchip BK3710 PATA controller driver
  pata_bk3710: disable IORDY Timer on chipset initialization
  pata_bk3710: clear status bits of BMISP on chipset initialization

Sekhar Nori (2):
  ARM: davinci: add pata_bk3710 libata driver support
  ARM: davinci_all_defconfig: convert to use libata PATA

 arch/arm/configs/davinci_all_defconfig    |   4 +-
 arch/arm/mach-davinci/board-dm644x-evm.c  |   3 +-
 arch/arm/mach-davinci/board-dm646x-evm.c  |   3 +-
 arch/arm/mach-davinci/board-neuros-osd2.c |   3 +-
 drivers/ata/Kconfig                       |   9 +
 drivers/ata/Makefile                      |   1 +
 drivers/ata/pata_bk3710.c                 | 382 ++++++++++++++++++++++++++++++
 7 files changed, 399 insertions(+), 6 deletions(-)
 create mode 100644 drivers/ata/pata_bk3710.c

-- 
1.9.1

[PATCH v3 1/5] ata: add Palmchip BK3710 PATA controller driver

[Bartlomiej Zolnierkiewicz]

Add Palmchip BK3710 PATA controller driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/Kconfig       |   9 ++
 drivers/ata/Makefile      |   1 +
 drivers/ata/pata_bk3710.c | 382 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 392 insertions(+)
 create mode 100644 drivers/ata/pata_bk3710.c

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 70b57d2..38fa4ac 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -510,6 +510,15 @@ config PATA_BF54X
 
 	  If unsure, say N.
 
+config PATA_BK3710
+	tristate "Palmchip BK3710 PATA support"
+	depends on ARCH_DAVINCI
+	help
+	  This option enables support for the integrated IDE controller on
+	  the TI DaVinci SoC.
+
+	  If unsure, say N.
+
 config PATA_CMD64X
 	tristate "CMD64x PATA support"
 	depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 89a0a19..9438db8 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_PATA_ARTOP)	+= pata_artop.o
 obj-$(CONFIG_PATA_ATIIXP)	+= pata_atiixp.o
 obj-$(CONFIG_PATA_ATP867X)	+= pata_atp867x.o
 obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
+obj-$(CONFIG_PATA_BK3710)	+= pata_bk3710.o
 obj-$(CONFIG_PATA_CMD64X)	+= pata_cmd64x.o
 obj-$(CONFIG_PATA_CS5520)	+= pata_cs5520.o
 obj-$(CONFIG_PATA_CS5530)	+= pata_cs5530.o
diff --git a/drivers/ata/pata_bk3710.c b/drivers/ata/pata_bk3710.c
new file mode 100644
index 0000000..1a1223f
--- /dev/null
+++ b/drivers/ata/pata_bk3710.c
@@ -0,0 +1,382 @@
+/*
+ * Palmchip BK3710 PATA controller driver
+ *
+ * Copyright (c) 2017 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Based on palm_bk3710.c:
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software, Inc., <source@mvista.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/ata.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/libata.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#define DRV_NAME "pata_bk3710"
+
+#define BK3710_TF_OFFSET	0x1F0
+#define BK3710_CTL_OFFSET	0x3F6
+
+#define BK3710_BMISP		0x02
+#define BK3710_IDETIMP		0x40
+#define BK3710_UDMACTL		0x48
+#define BK3710_MISCCTL		0x50
+#define BK3710_REGSTB		0x54
+#define BK3710_REGRCVR		0x58
+#define BK3710_DATSTB		0x5C
+#define BK3710_DATRCVR		0x60
+#define BK3710_DMASTB		0x64
+#define BK3710_DMARCVR		0x68
+#define BK3710_UDMASTB		0x6C
+#define BK3710_UDMATRP		0x70
+#define BK3710_UDMAENV		0x74
+#define BK3710_IORDYTMP		0x78
+
+static struct scsi_host_template pata_bk3710_sht = {
+	ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static unsigned int ideclk_period; /* in nanoseconds */
+
+struct pata_bk3710_udmatiming {
+	unsigned int rptime;	/* tRP -- Ready to pause time (nsec) */
+	unsigned int cycletime;	/* tCYCTYP2/2 -- avg Cycle Time (nsec) */
+				/* tENV is always a minimum of 20 nsec */
+};
+
+static const struct pata_bk3710_udmatiming pata_bk3710_udmatimings[6] = {
+	{ 160, 240 / 2 },	/* UDMA Mode 0 */
+	{ 125, 160 / 2 },	/* UDMA Mode 1 */
+	{ 100, 120 / 2 },	/* UDMA Mode 2 */
+	{ 100,  90 / 2 },	/* UDMA Mode 3 */
+	{ 100,  60 / 2 },	/* UDMA Mode 4 */
+	{  85,  40 / 2 },	/* UDMA Mode 5 */
+};
+
+static void pata_bk3710_setudmamode(void __iomem *base, unsigned int dev,
+				    unsigned int mode)
+{
+	u32 val32;
+	u16 val16;
+	u8 tenv, trp, t0;
+
+	/* DMA Data Setup */
+	t0 = DIV_ROUND_UP(pata_bk3710_udmatimings[mode].cycletime,
+			  ideclk_period) - 1;
+	tenv = DIV_ROUND_UP(20, ideclk_period) - 1;
+	trp = DIV_ROUND_UP(pata_bk3710_udmatimings[mode].rptime,
+			   ideclk_period) - 1;
+
+	/* udmastb Ultra DMA Access Strobe Width */
+	val32 = ioread32(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8));
+	val32 |= t0 << (dev ? 8 : 0);
+	iowrite32(val32, base + BK3710_UDMASTB);
+
+	/* udmatrp Ultra DMA Ready to Pause Time */
+	val32 = ioread32(base + BK3710_UDMATRP) & (0xFF << (dev ? 0 : 8));
+	val32 |= trp << (dev ? 8 : 0);
+	iowrite32(val32, base + BK3710_UDMATRP);
+
+	/* udmaenv Ultra DMA envelop Time */
+	val32 = ioread32(base + BK3710_UDMAENV) & (0xFF << (dev ? 0 : 8));
+	val32 |= tenv << (dev ? 8 : 0);
+	iowrite32(val32, base + BK3710_UDMAENV);
+
+	/* Enable UDMA for Device */
+	val16 = ioread16(base + BK3710_UDMACTL) | (1 << dev);
+	iowrite16(val16, base + BK3710_UDMACTL);
+}
+
+static void pata_bk3710_setmwdmamode(void __iomem *base, unsigned int dev,
+				     unsigned short min_cycle,
+				     unsigned int mode)
+{
+	const struct ata_timing *t;
+	int cycletime;
+	u32 val32;
+	u16 val16;
+	u8 td, tkw, t0;
+
+	t = ata_timing_find_mode(mode);
+	cycletime = max_t(int, t->cycle, min_cycle);
+
+	/* DMA Data Setup */
+	t0 = DIV_ROUND_UP(cycletime, ideclk_period);
+	td = DIV_ROUND_UP(t->active, ideclk_period);
+	tkw = t0 - td - 1;
+	td--;
+
+	val32 = ioread32(base + BK3710_DMASTB) & (0xFF << (dev ? 0 : 8));
+	val32 |= td << (dev ? 8 : 0);
+	iowrite32(val32, base + BK3710_DMASTB);
+
+	val32 = ioread32(base + BK3710_DMARCVR) & (0xFF << (dev ? 0 : 8));
+	val32 |= tkw << (dev ? 8 : 0);
+	iowrite32(val32, base + BK3710_DMARCVR);
+
+	/* Disable UDMA for Device */
+	val16 = ioread16(base + BK3710_UDMACTL) & ~(1 << dev);
+	iowrite16(val16, base + BK3710_UDMACTL);
+}
+
+static void pata_bk3710_set_dmamode(struct ata_port *ap,
+				    struct ata_device *adev)
+{
+	void __iomem *base = (void __iomem *)ap->ioaddr.bmdma_addr;
+	int is_slave = adev->devno;
+	const u8 xferspeed = adev->dma_mode;
+
+	if (xferspeed >= XFER_UDMA_0)
+		pata_bk3710_setudmamode(base, is_slave,
+					xferspeed - XFER_UDMA_0);
+	else
+		pata_bk3710_setmwdmamode(base, is_slave,
+					 adev->id[ATA_ID_EIDE_DMA_MIN],
+					 xferspeed);
+}
+
+static void pata_bk3710_setpiomode(void __iomem *base, struct ata_device *pair,
+				   unsigned int dev, unsigned int cycletime,
+				   unsigned int mode)
+{
+	const struct ata_timing *t;
+	u32 val32;
+	u8 t2, t2i, t0;
+
+	t = ata_timing_find_mode(XFER_PIO_0 + mode);
+
+	/* PIO Data Setup */
+	t0 = DIV_ROUND_UP(cycletime, ideclk_period);
+	t2 = DIV_ROUND_UP(t->active, ideclk_period);
+
+	t2i = t0 - t2 - 1;
+	t2--;
+
+	val32 = ioread32(base + BK3710_DATSTB) & (0xFF << (dev ? 0 : 8));
+	val32 |= t2 << (dev ? 8 : 0);
+	iowrite32(val32, base + BK3710_DATSTB);
+
+	val32 = ioread32(base + BK3710_DATRCVR) & (0xFF << (dev ? 0 : 8));
+	val32 |= t2i << (dev ? 8 : 0);
+	iowrite32(val32, base + BK3710_DATRCVR);
+
+	/* FIXME: this is broken also in the old driver */
+	if (pair) {
+		u8 mode2 = pair->pio_mode - XFER_PIO_0;
+
+		if (mode2 < mode)
+			mode = mode2;
+	}
+
+	/* TASKFILE Setup */
+	t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period);
+	t2 = DIV_ROUND_UP(t->act8b, ideclk_period);
+
+	t2i = t0 - t2 - 1;
+	t2--;
+
+	val32 = ioread32(base + BK3710_REGSTB) & (0xFF << (dev ? 0 : 8));
+	val32 |= t2 << (dev ? 8 : 0);
+	iowrite32(val32, base + BK3710_REGSTB);
+
+	val32 = ioread32(base + BK3710_REGRCVR) & (0xFF << (dev ? 0 : 8));
+	val32 |= t2i << (dev ? 8 : 0);
+	iowrite32(val32, base + BK3710_REGRCVR);
+}
+
+static void pata_bk3710_set_piomode(struct ata_port *ap,
+				    struct ata_device *adev)
+{
+	void __iomem *base = (void __iomem *)ap->ioaddr.bmdma_addr;
+	struct ata_device *pair = ata_dev_pair(adev);
+	const struct ata_timing *t = ata_timing_find_mode(adev->pio_mode);
+	const u16 *id = adev->id;
+	unsigned int cycle_time = 0;
+	int is_slave = adev->devno;
+	const u8 pio = adev->pio_mode - XFER_PIO_0;
+
+	if (id[ATA_ID_FIELD_VALID] & 2) {
+		if (ata_id_has_iordy(id))
+			cycle_time = id[ATA_ID_EIDE_PIO_IORDY];
+		else
+			cycle_time = id[ATA_ID_EIDE_PIO];
+
+		/* conservative "downgrade" for all pre-ATA2 drives */
+		if (pio < 3 && cycle_time < t->cycle)
+			cycle_time = 0; /* use standard timing */
+	}
+
+	if (!cycle_time)
+		cycle_time = t->cycle;
+
+	pata_bk3710_setpiomode(base, pair, is_slave, cycle_time, pio);
+}
+
+static void pata_bk3710_chipinit(void __iomem *base)
+{
+	/*
+	 * REVISIT:  the ATA reset signal needs to be managed through a
+	 * GPIO, which means it should come from platform_data.  Until
+	 * we get and use such information, we have to trust that things
+	 * have been reset before we get here.
+	 */
+
+	/*
+	 * Program the IDETIMP Register Value based on the following assumptions
+	 *
+	 * (ATA_IDETIMP_IDEEN		, ENABLE ) |
+	 * (ATA_IDETIMP_PREPOST1	, DISABLE) |
+	 * (ATA_IDETIMP_PREPOST0	, DISABLE) |
+	 *
+	 * DM6446 silicon rev 2.1 and earlier have no observed net benefit
+	 * from enabling prefetch/postwrite.
+	 */
+	iowrite16(BIT(15), base + BK3710_IDETIMP);
+
+	/*
+	 * UDMACTL Ultra-ATA DMA Control
+	 * (ATA_UDMACTL_UDMAP1	, 0 ) |
+	 * (ATA_UDMACTL_UDMAP0	, 0 )
+	 *
+	 */
+	iowrite16(0, base + BK3710_UDMACTL);
+
+	/*
+	 * MISCCTL Miscellaneous Conrol Register
+	 * (ATA_MISCCTL_HWNHLD1P	, 1 cycle)
+	 * (ATA_MISCCTL_HWNHLD0P	, 1 cycle)
+	 * (ATA_MISCCTL_TIMORIDE	, 1)
+	 */
+	iowrite32(0x001, base + BK3710_MISCCTL);
+
+	/*
+	 * IORDYTMP IORDY Timer for Primary Register
+	 * (ATA_IORDYTMP_IORDYTMP     , 0xffff  )
+	 */
+	iowrite32(0xFFFF, base + BK3710_IORDYTMP);
+
+	/*
+	 * Configure BMISP Register
+	 * (ATA_BMISP_DMAEN1	, DISABLE )	|
+	 * (ATA_BMISP_DMAEN0	, DISABLE )	|
+	 * (ATA_BMISP_IORDYINT	, CLEAR)	|
+	 * (ATA_BMISP_INTRSTAT	, CLEAR)	|
+	 * (ATA_BMISP_DMAERROR	, CLEAR)
+	 */
+	iowrite16(0, base + BK3710_BMISP);
+
+	pata_bk3710_setpiomode(base, NULL, 0, 600, 0);
+	pata_bk3710_setpiomode(base, NULL, 1, 600, 0);
+}
+
+static struct ata_port_operations pata_bk3710_ports_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.cable_detect		= ata_cable_80wire,
+
+	.set_piomode		= pata_bk3710_set_piomode,
+	.set_dmamode		= pata_bk3710_set_dmamode,
+};
+
+static int __init pata_bk3710_probe(struct platform_device *pdev)
+{
+	struct clk *clk;
+	struct resource *mem;
+	struct ata_host *host;
+	struct ata_port *ap;
+	void __iomem *base;
+	unsigned long rate;
+	int irq;
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk))
+		return -ENODEV;
+
+	clk_enable(clk);
+	rate = clk_get_rate(clk);
+	if (!rate)
+		return -EINVAL;
+
+	/* NOTE:  round *down* to meet minimum timings; we count in clocks */
+	ideclk_period = 1000000000UL / rate;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		pr_err(DRV_NAME ": failed to get IRQ resource\n");
+		return irq;
+	}
+
+	base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	/* configure the Palmchip controller */
+	pata_bk3710_chipinit(base);
+
+	/* allocate host */
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		return -ENOMEM;
+	ap = host->ports[0];
+
+	ap->ops = &pata_bk3710_ports_ops;
+	ap->pio_mask = ATA_PIO4;
+	ap->mwdma_mask = ATA_MWDMA2;
+	ap->udma_mask = rate < 100000000 ? ATA_UDMA4 : ATA_UDMA5;
+	ap->flags |= ATA_FLAG_SLAVE_POSS;
+
+	ap->ioaddr.data_addr		= base + BK3710_TF_OFFSET;
+	ap->ioaddr.error_addr		= base + BK3710_TF_OFFSET + 1;
+	ap->ioaddr.feature_addr		= base + BK3710_TF_OFFSET + 1;
+	ap->ioaddr.nsect_addr		= base + BK3710_TF_OFFSET + 2;
+	ap->ioaddr.lbal_addr		= base + BK3710_TF_OFFSET + 3;
+	ap->ioaddr.lbam_addr		= base + BK3710_TF_OFFSET + 4;
+	ap->ioaddr.lbah_addr		= base + BK3710_TF_OFFSET + 5;
+	ap->ioaddr.device_addr		= base + BK3710_TF_OFFSET + 6;
+	ap->ioaddr.status_addr		= base + BK3710_TF_OFFSET + 7;
+	ap->ioaddr.command_addr		= base + BK3710_TF_OFFSET + 7;
+
+	ap->ioaddr.altstatus_addr	= base + BK3710_CTL_OFFSET;
+	ap->ioaddr.ctl_addr		= base + BK3710_CTL_OFFSET;
+
+	ap->ioaddr.bmdma_addr		= base;
+
+	ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx",
+		      (unsigned long)base + BK3710_TF_OFFSET,
+		      (unsigned long)base + BK3710_CTL_OFFSET);
+
+	/* activate */
+	return ata_host_activate(host, irq, ata_sff_interrupt, 0,
+				 &pata_bk3710_sht);
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:palm_bk3710");
+
+static struct platform_driver pata_bk3710_driver = {
+	.driver = {
+		.name = "palm_bk3710",
+	},
+};
+
+static int __init pata_bk3710_init(void)
+{
+	return platform_driver_probe(&pata_bk3710_driver, pata_bk3710_probe);
+}
+
+module_init(pata_bk3710_init);
+MODULE_LICENSE("GPL");
-- 
1.9.1

[PATCH v3 1/5] ata: add Palmchip BK3710 PATA controller driver

[Bartlomiej Zolnierkiewicz]

Add Palmchip BK3710 PATA controller driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/Kconfig       |   9 ++
 drivers/ata/Makefile      |   1 +
 drivers/ata/pata_bk3710.c | 382 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 392 insertions(+)
 create mode 100644 drivers/ata/pata_bk3710.c

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 70b57d2..38fa4ac 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -510,6 +510,15 @@ config PATA_BF54X
 
 	  If unsure, say N.
 
+config PATA_BK3710
+	tristate "Palmchip BK3710 PATA support"
+	depends on ARCH_DAVINCI
+	help
+	  This option enables support for the integrated IDE controller on
+	  the TI DaVinci SoC.
+
+	  If unsure, say N.
+
 config PATA_CMD64X
 	tristate "CMD64x PATA support"
 	depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 89a0a19..9438db8 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_PATA_ARTOP)	+= pata_artop.o
 obj-$(CONFIG_PATA_ATIIXP)	+= pata_atiixp.o
 obj-$(CONFIG_PATA_ATP867X)	+= pata_atp867x.o
 obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
+obj-$(CONFIG_PATA_BK3710)	+= pata_bk3710.o
 obj-$(CONFIG_PATA_CMD64X)	+= pata_cmd64x.o
 obj-$(CONFIG_PATA_CS5520)	+= pata_cs5520.o
 obj-$(CONFIG_PATA_CS5530)	+= pata_cs5530.o
diff --git a/drivers/ata/pata_bk3710.c b/drivers/ata/pata_bk3710.c
new file mode 100644
index 0000000..1a1223f
--- /dev/null
+++ b/drivers/ata/pata_bk3710.c
@@ -0,0 +1,382 @@
+/*
+ * Palmchip BK3710 PATA controller driver
+ *
+ * Copyright (c) 2017 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Based on palm_bk3710.c:
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software, Inc., <source@mvista.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/ata.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/libata.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#define DRV_NAME "pata_bk3710"
+
+#define BK3710_TF_OFFSET	0x1F0
+#define BK3710_CTL_OFFSET	0x3F6
+
+#define BK3710_BMISP		0x02
+#define BK3710_IDETIMP		0x40
+#define BK3710_UDMACTL		0x48
+#define BK3710_MISCCTL		0x50
+#define BK3710_REGSTB		0x54
+#define BK3710_REGRCVR		0x58
+#define BK3710_DATSTB		0x5C
+#define BK3710_DATRCVR		0x60
+#define BK3710_DMASTB		0x64
+#define BK3710_DMARCVR		0x68
+#define BK3710_UDMASTB		0x6C
+#define BK3710_UDMATRP		0x70
+#define BK3710_UDMAENV		0x74
+#define BK3710_IORDYTMP		0x78
+
+static struct scsi_host_template pata_bk3710_sht = {
+	ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static unsigned int ideclk_period; /* in nanoseconds */
+
+struct pata_bk3710_udmatiming {
+	unsigned int rptime;	/* tRP -- Ready to pause time (nsec) */
+	unsigned int cycletime;	/* tCYCTYP2/2 -- avg Cycle Time (nsec) */
+				/* tENV is always a minimum of 20 nsec */
+};
+
+static const struct pata_bk3710_udmatiming pata_bk3710_udmatimings[6] = {
+	{ 160, 240 / 2 },	/* UDMA Mode 0 */
+	{ 125, 160 / 2 },	/* UDMA Mode 1 */
+	{ 100, 120 / 2 },	/* UDMA Mode 2 */
+	{ 100,  90 / 2 },	/* UDMA Mode 3 */
+	{ 100,  60 / 2 },	/* UDMA Mode 4 */
+	{  85,  40 / 2 },	/* UDMA Mode 5 */
+};
+
+static void pata_bk3710_setudmamode(void __iomem *base, unsigned int dev,
+				    unsigned int mode)
+{
+	u32 val32;
+	u16 val16;
+	u8 tenv, trp, t0;
+
+	/* DMA Data Setup */
+	t0 = DIV_ROUND_UP(pata_bk3710_udmatimings[mode].cycletime,
+			  ideclk_period) - 1;
+	tenv = DIV_ROUND_UP(20, ideclk_period) - 1;
+	trp = DIV_ROUND_UP(pata_bk3710_udmatimings[mode].rptime,
+			   ideclk_period) - 1;
+
+	/* udmastb Ultra DMA Access Strobe Width */
+	val32 = ioread32(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8));
+	val32 |= t0 << (dev ? 8 : 0);
+	iowrite32(val32, base + BK3710_UDMASTB);
+
+	/* udmatrp Ultra DMA Ready to Pause Time */
+	val32 = ioread32(base + BK3710_UDMATRP) & (0xFF << (dev ? 0 : 8));
+	val32 |= trp << (dev ? 8 : 0);
+	iowrite32(val32, base + BK3710_UDMATRP);
+
+	/* udmaenv Ultra DMA envelop Time */
+	val32 = ioread32(base + BK3710_UDMAENV) & (0xFF << (dev ? 0 : 8));
+	val32 |= tenv << (dev ? 8 : 0);
+	iowrite32(val32, base + BK3710_UDMAENV);
+
+	/* Enable UDMA for Device */
+	val16 = ioread16(base + BK3710_UDMACTL) | (1 << dev);
+	iowrite16(val16, base + BK3710_UDMACTL);
+}
+
+static void pata_bk3710_setmwdmamode(void __iomem *base, unsigned int dev,
+				     unsigned short min_cycle,
+				     unsigned int mode)
+{
+	const struct ata_timing *t;
+	int cycletime;
+	u32 val32;
+	u16 val16;
+	u8 td, tkw, t0;
+
+	t = ata_timing_find_mode(mode);
+	cycletime = max_t(int, t->cycle, min_cycle);
+
+	/* DMA Data Setup */
+	t0 = DIV_ROUND_UP(cycletime, ideclk_period);
+	td = DIV_ROUND_UP(t->active, ideclk_period);
+	tkw = t0 - td - 1;
+	td--;
+
+	val32 = ioread32(base + BK3710_DMASTB) & (0xFF << (dev ? 0 : 8));
+	val32 |= td << (dev ? 8 : 0);
+	iowrite32(val32, base + BK3710_DMASTB);
+
+	val32 = ioread32(base + BK3710_DMARCVR) & (0xFF << (dev ? 0 : 8));
+	val32 |= tkw << (dev ? 8 : 0);
+	iowrite32(val32, base + BK3710_DMARCVR);
+
+	/* Disable UDMA for Device */
+	val16 = ioread16(base + BK3710_UDMACTL) & ~(1 << dev);
+	iowrite16(val16, base + BK3710_UDMACTL);
+}
+
+static void pata_bk3710_set_dmamode(struct ata_port *ap,
+				    struct ata_device *adev)
+{
+	void __iomem *base = (void __iomem *)ap->ioaddr.bmdma_addr;
+	int is_slave = adev->devno;
+	const u8 xferspeed = adev->dma_mode;
+
+	if (xferspeed >= XFER_UDMA_0)
+		pata_bk3710_setudmamode(base, is_slave,
+					xferspeed - XFER_UDMA_0);
+	else
+		pata_bk3710_setmwdmamode(base, is_slave,
+					 adev->id[ATA_ID_EIDE_DMA_MIN],
+					 xferspeed);
+}
+
+static void pata_bk3710_setpiomode(void __iomem *base, struct ata_device *pair,
+				   unsigned int dev, unsigned int cycletime,
+				   unsigned int mode)
+{
+	const struct ata_timing *t;
+	u32 val32;
+	u8 t2, t2i, t0;
+
+	t = ata_timing_find_mode(XFER_PIO_0 + mode);
+
+	/* PIO Data Setup */
+	t0 = DIV_ROUND_UP(cycletime, ideclk_period);
+	t2 = DIV_ROUND_UP(t->active, ideclk_period);
+
+	t2i = t0 - t2 - 1;
+	t2--;
+
+	val32 = ioread32(base + BK3710_DATSTB) & (0xFF << (dev ? 0 : 8));
+	val32 |= t2 << (dev ? 8 : 0);
+	iowrite32(val32, base + BK3710_DATSTB);
+
+	val32 = ioread32(base + BK3710_DATRCVR) & (0xFF << (dev ? 0 : 8));
+	val32 |= t2i << (dev ? 8 : 0);
+	iowrite32(val32, base + BK3710_DATRCVR);
+
+	/* FIXME: this is broken also in the old driver */
+	if (pair) {
+		u8 mode2 = pair->pio_mode - XFER_PIO_0;
+
+		if (mode2 < mode)
+			mode = mode2;
+	}
+
+	/* TASKFILE Setup */
+	t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period);
+	t2 = DIV_ROUND_UP(t->act8b, ideclk_period);
+
+	t2i = t0 - t2 - 1;
+	t2--;
+
+	val32 = ioread32(base + BK3710_REGSTB) & (0xFF << (dev ? 0 : 8));
+	val32 |= t2 << (dev ? 8 : 0);
+	iowrite32(val32, base + BK3710_REGSTB);
+
+	val32 = ioread32(base + BK3710_REGRCVR) & (0xFF << (dev ? 0 : 8));
+	val32 |= t2i << (dev ? 8 : 0);
+	iowrite32(val32, base + BK3710_REGRCVR);
+}
+
+static void pata_bk3710_set_piomode(struct ata_port *ap,
+				    struct ata_device *adev)
+{
+	void __iomem *base = (void __iomem *)ap->ioaddr.bmdma_addr;
+	struct ata_device *pair = ata_dev_pair(adev);
+	const struct ata_timing *t = ata_timing_find_mode(adev->pio_mode);
+	const u16 *id = adev->id;
+	unsigned int cycle_time = 0;
+	int is_slave = adev->devno;
+	const u8 pio = adev->pio_mode - XFER_PIO_0;
+
+	if (id[ATA_ID_FIELD_VALID] & 2) {
+		if (ata_id_has_iordy(id))
+			cycle_time = id[ATA_ID_EIDE_PIO_IORDY];
+		else
+			cycle_time = id[ATA_ID_EIDE_PIO];
+
+		/* conservative "downgrade" for all pre-ATA2 drives */
+		if (pio < 3 && cycle_time < t->cycle)
+			cycle_time = 0; /* use standard timing */
+	}
+
+	if (!cycle_time)
+		cycle_time = t->cycle;
+
+	pata_bk3710_setpiomode(base, pair, is_slave, cycle_time, pio);
+}
+
+static void pata_bk3710_chipinit(void __iomem *base)
+{
+	/*
+	 * REVISIT:  the ATA reset signal needs to be managed through a
+	 * GPIO, which means it should come from platform_data.  Until
+	 * we get and use such information, we have to trust that things
+	 * have been reset before we get here.
+	 */
+
+	/*
+	 * Program the IDETIMP Register Value based on the following assumptions
+	 *
+	 * (ATA_IDETIMP_IDEEN		, ENABLE ) |
+	 * (ATA_IDETIMP_PREPOST1	, DISABLE) |
+	 * (ATA_IDETIMP_PREPOST0	, DISABLE) |
+	 *
+	 * DM6446 silicon rev 2.1 and earlier have no observed net benefit
+	 * from enabling prefetch/postwrite.
+	 */
+	iowrite16(BIT(15), base + BK3710_IDETIMP);
+
+	/*
+	 * UDMACTL Ultra-ATA DMA Control
+	 * (ATA_UDMACTL_UDMAP1	, 0 ) |
+	 * (ATA_UDMACTL_UDMAP0	, 0 )
+	 *
+	 */
+	iowrite16(0, base + BK3710_UDMACTL);
+
+	/*
+	 * MISCCTL Miscellaneous Conrol Register
+	 * (ATA_MISCCTL_HWNHLD1P	, 1 cycle)
+	 * (ATA_MISCCTL_HWNHLD0P	, 1 cycle)
+	 * (ATA_MISCCTL_TIMORIDE	, 1)
+	 */
+	iowrite32(0x001, base + BK3710_MISCCTL);
+
+	/*
+	 * IORDYTMP IORDY Timer for Primary Register
+	 * (ATA_IORDYTMP_IORDYTMP     , 0xffff  )
+	 */
+	iowrite32(0xFFFF, base + BK3710_IORDYTMP);
+
+	/*
+	 * Configure BMISP Register
+	 * (ATA_BMISP_DMAEN1	, DISABLE )	|
+	 * (ATA_BMISP_DMAEN0	, DISABLE )	|
+	 * (ATA_BMISP_IORDYINT	, CLEAR)	|
+	 * (ATA_BMISP_INTRSTAT	, CLEAR)	|
+	 * (ATA_BMISP_DMAERROR	, CLEAR)
+	 */
+	iowrite16(0, base + BK3710_BMISP);
+
+	pata_bk3710_setpiomode(base, NULL, 0, 600, 0);
+	pata_bk3710_setpiomode(base, NULL, 1, 600, 0);
+}
+
+static struct ata_port_operations pata_bk3710_ports_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.cable_detect		= ata_cable_80wire,
+
+	.set_piomode		= pata_bk3710_set_piomode,
+	.set_dmamode		= pata_bk3710_set_dmamode,
+};
+
+static int __init pata_bk3710_probe(struct platform_device *pdev)
+{
+	struct clk *clk;
+	struct resource *mem;
+	struct ata_host *host;
+	struct ata_port *ap;
+	void __iomem *base;
+	unsigned long rate;
+	int irq;
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk))
+		return -ENODEV;
+
+	clk_enable(clk);
+	rate = clk_get_rate(clk);
+	if (!rate)
+		return -EINVAL;
+
+	/* NOTE:  round *down* to meet minimum timings; we count in clocks */
+	ideclk_period = 1000000000UL / rate;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		pr_err(DRV_NAME ": failed to get IRQ resource\n");
+		return irq;
+	}
+
+	base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	/* configure the Palmchip controller */
+	pata_bk3710_chipinit(base);
+
+	/* allocate host */
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		return -ENOMEM;
+	ap = host->ports[0];
+
+	ap->ops = &pata_bk3710_ports_ops;
+	ap->pio_mask = ATA_PIO4;
+	ap->mwdma_mask = ATA_MWDMA2;
+	ap->udma_mask = rate < 100000000 ? ATA_UDMA4 : ATA_UDMA5;
+	ap->flags |= ATA_FLAG_SLAVE_POSS;
+
+	ap->ioaddr.data_addr		= base + BK3710_TF_OFFSET;
+	ap->ioaddr.error_addr		= base + BK3710_TF_OFFSET + 1;
+	ap->ioaddr.feature_addr		= base + BK3710_TF_OFFSET + 1;
+	ap->ioaddr.nsect_addr		= base + BK3710_TF_OFFSET + 2;
+	ap->ioaddr.lbal_addr		= base + BK3710_TF_OFFSET + 3;
+	ap->ioaddr.lbam_addr		= base + BK3710_TF_OFFSET + 4;
+	ap->ioaddr.lbah_addr		= base + BK3710_TF_OFFSET + 5;
+	ap->ioaddr.device_addr		= base + BK3710_TF_OFFSET + 6;
+	ap->ioaddr.status_addr		= base + BK3710_TF_OFFSET + 7;
+	ap->ioaddr.command_addr		= base + BK3710_TF_OFFSET + 7;
+
+	ap->ioaddr.altstatus_addr	= base + BK3710_CTL_OFFSET;
+	ap->ioaddr.ctl_addr		= base + BK3710_CTL_OFFSET;
+
+	ap->ioaddr.bmdma_addr		= base;
+
+	ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx",
+		      (unsigned long)base + BK3710_TF_OFFSET,
+		      (unsigned long)base + BK3710_CTL_OFFSET);
+
+	/* activate */
+	return ata_host_activate(host, irq, ata_sff_interrupt, 0,
+				 &pata_bk3710_sht);
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:palm_bk3710");
+
+static struct platform_driver pata_bk3710_driver = {
+	.driver = {
+		.name = "palm_bk3710",
+	},
+};
+
+static int __init pata_bk3710_init(void)
+{
+	return platform_driver_probe(&pata_bk3710_driver, pata_bk3710_probe);
+}
+
+module_init(pata_bk3710_init);
+MODULE_LICENSE("GPL");
-- 
1.9.1

[PATCH v3 2/5] pata_bk3710: disable IORDY Timer on chipset initialization

[Bartlomiej Zolnierkiewicz]

Disable IORDY Timer as the driver doesn't handle IORDY Timer
interrupt anyway.

Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/pata_bk3710.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/pata_bk3710.c b/drivers/ata/pata_bk3710.c
index 1a1223f..f22e4bf 100644
--- a/drivers/ata/pata_bk3710.c
+++ b/drivers/ata/pata_bk3710.c
@@ -264,9 +264,9 @@ static void pata_bk3710_chipinit(void __iomem *base)
 
 	/*
 	 * IORDYTMP IORDY Timer for Primary Register
-	 * (ATA_IORDYTMP_IORDYTMP     , 0xffff  )
+	 * (ATA_IORDYTMP_IORDYTMP	, DISABLE)
 	 */
-	iowrite32(0xFFFF, base + BK3710_IORDYTMP);
+	iowrite32(0, base + BK3710_IORDYTMP);
 
 	/*
 	 * Configure BMISP Register
-- 
1.9.1

[PATCH v3 2/5] pata_bk3710: disable IORDY Timer on chipset initialization

[Bartlomiej Zolnierkiewicz]

Disable IORDY Timer as the driver doesn't handle IORDY Timer
interrupt anyway.

Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/pata_bk3710.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/pata_bk3710.c b/drivers/ata/pata_bk3710.c
index 1a1223f..f22e4bf 100644
--- a/drivers/ata/pata_bk3710.c
+++ b/drivers/ata/pata_bk3710.c
@@ -264,9 +264,9 @@ static void pata_bk3710_chipinit(void __iomem *base)
 
 	/*
 	 * IORDYTMP IORDY Timer for Primary Register
-	 * (ATA_IORDYTMP_IORDYTMP     , 0xffff  )
+	 * (ATA_IORDYTMP_IORDYTMP	, DISABLE)
 	 */
-	iowrite32(0xFFFF, base + BK3710_IORDYTMP);
+	iowrite32(0, base + BK3710_IORDYTMP);
 
 	/*
 	 * Configure BMISP Register
-- 
1.9.1

[PATCH v3 3/5] pata_bk3710: clear status bits of BMISP on chipset initialization

[Bartlomiej Zolnierkiewicz]

Clear IORDYINT, INTRSTAT and DMAERROR bits of BMISP register
(value '1' needs to be written to the bit to clear it).

Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/pata_bk3710.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/pata_bk3710.c b/drivers/ata/pata_bk3710.c
index f22e4bf..6c3bd5f 100644
--- a/drivers/ata/pata_bk3710.c
+++ b/drivers/ata/pata_bk3710.c
@@ -276,7 +276,7 @@ static void pata_bk3710_chipinit(void __iomem *base)
 	 * (ATA_BMISP_INTRSTAT	, CLEAR)	|
 	 * (ATA_BMISP_DMAERROR	, CLEAR)
 	 */
-	iowrite16(0, base + BK3710_BMISP);
+	iowrite16(0xE, base + BK3710_BMISP);
 
 	pata_bk3710_setpiomode(base, NULL, 0, 600, 0);
 	pata_bk3710_setpiomode(base, NULL, 1, 600, 0);
-- 
1.9.1

[PATCH v3 3/5] pata_bk3710: clear status bits of BMISP on chipset initialization

[Bartlomiej Zolnierkiewicz]

Clear IORDYINT, INTRSTAT and DMAERROR bits of BMISP register
(value '1' needs to be written to the bit to clear it).

Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/pata_bk3710.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/pata_bk3710.c b/drivers/ata/pata_bk3710.c
index f22e4bf..6c3bd5f 100644
--- a/drivers/ata/pata_bk3710.c
+++ b/drivers/ata/pata_bk3710.c
@@ -276,7 +276,7 @@ static void pata_bk3710_chipinit(void __iomem *base)
 	 * (ATA_BMISP_INTRSTAT	, CLEAR)	|
 	 * (ATA_BMISP_DMAERROR	, CLEAR)
 	 */
-	iowrite16(0, base + BK3710_BMISP);
+	iowrite16(0xE, base + BK3710_BMISP);
 
 	pata_bk3710_setpiomode(base, NULL, 0, 600, 0);
 	pata_bk3710_setpiomode(base, NULL, 1, 600, 0);
-- 
1.9.1

[PATCH v3 4/5] ARM: davinci: add pata_bk3710 libata driver support

[Bartlomiej Zolnierkiewicz]

From: Sekhar Nori <nsekhar@ti.com>

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
[b.zolnierkie: split from bigger patch + preserved old driver support]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 arch/arm/mach-davinci/board-dm644x-evm.c  | 3 ++-
 arch/arm/mach-davinci/board-dm646x-evm.c  | 3 ++-
 arch/arm/mach-davinci/board-neuros-osd2.c | 3 ++-
 3 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 023480b..20f1874 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -744,7 +744,8 @@ static int davinci_phy_fixup(struct phy_device *phydev)
 	return 0;
 }
 
-#define HAS_ATA		IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
+#define HAS_ATA		(IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+			 IS_ENABLED(CONFIG_PATA_BK3710))
 
 #define HAS_NOR		IS_ENABLED(CONFIG_MTD_PHYSMAP)
 
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index f702d4f..cb17682 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -119,7 +119,8 @@
 	},
 };
 
-#define HAS_ATA		IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
+#define HAS_ATA		(IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+			 IS_ENABLED(CONFIG_PATA_BK3710))
 
 #ifdef CONFIG_I2C
 /* CPLD Register 0 bits to control ATA */
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 0a78388..0c02aaa 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -163,7 +163,8 @@ static void __init davinci_ntosd2_map_io(void)
 	.wires		= 4,
 };
 
-#define HAS_ATA		IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
+#define HAS_ATA		(IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+			 IS_ENABLED(CONFIG_PATA_BK3710))
 
 #define HAS_NAND	IS_ENABLED(CONFIG_MTD_NAND_DAVINCI)
 
-- 
1.9.1

[PATCH v3 4/5] ARM: davinci: add pata_bk3710 libata driver support

[Bartlomiej Zolnierkiewicz]

From: Sekhar Nori <nsekhar@ti.com>

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
[b.zolnierkie: split from bigger patch + preserved old driver support]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 arch/arm/mach-davinci/board-dm644x-evm.c  | 3 ++-
 arch/arm/mach-davinci/board-dm646x-evm.c  | 3 ++-
 arch/arm/mach-davinci/board-neuros-osd2.c | 3 ++-
 3 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 023480b..20f1874 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -744,7 +744,8 @@ static int davinci_phy_fixup(struct phy_device *phydev)
 	return 0;
 }
 
-#define HAS_ATA		IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
+#define HAS_ATA		(IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+			 IS_ENABLED(CONFIG_PATA_BK3710))
 
 #define HAS_NOR		IS_ENABLED(CONFIG_MTD_PHYSMAP)
 
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index f702d4f..cb17682 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -119,7 +119,8 @@
 	},
 };
 
-#define HAS_ATA		IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
+#define HAS_ATA		(IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+			 IS_ENABLED(CONFIG_PATA_BK3710))
 
 #ifdef CONFIG_I2C
 /* CPLD Register 0 bits to control ATA */
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 0a78388..0c02aaa 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -163,7 +163,8 @@ static void __init davinci_ntosd2_map_io(void)
 	.wires		= 4,
 };
 
-#define HAS_ATA		IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
+#define HAS_ATA		(IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+			 IS_ENABLED(CONFIG_PATA_BK3710))
 
 #define HAS_NAND	IS_ENABLED(CONFIG_MTD_NAND_DAVINCI)
 
-- 
1.9.1

[PATCH v3 5/5] ARM: davinci_all_defconfig: convert to use libata PATA

[Bartlomiej Zolnierkiewicz]

From: Sekhar Nori <nsekhar@ti.com>

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts davinci_all_defconfig to use libata PATA
drivers.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
[b.zolnierkie: split from bigger patch + added patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 arch/arm/configs/davinci_all_defconfig | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index c8663ea..93aab3d 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -74,12 +74,10 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
 CONFIG_BLK_DEV_RAM_SIZE=32768
 CONFIG_EEPROM_AT24=y
-CONFIG_IDE=m
-CONFIG_BLK_DEV_PALMCHIP_BK3710=m
-CONFIG_SCSI=m
 CONFIG_BLK_DEV_SD=m
 CONFIG_ATA=m
 CONFIG_AHCI_DA850=m
+CONFIG_PATA_BK3710=m
 CONFIG_NETDEVICES=y
 CONFIG_NETCONSOLE=y
 CONFIG_TUN=m
-- 
1.9.1

[PATCH v3 5/5] ARM: davinci_all_defconfig: convert to use libata PATA

[Bartlomiej Zolnierkiewicz]

From: Sekhar Nori <nsekhar@ti.com>

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts davinci_all_defconfig to use libata PATA
drivers.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
[b.zolnierkie: split from bigger patch + added patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 arch/arm/configs/davinci_all_defconfig | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index c8663ea..93aab3d 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -74,12 +74,10 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
 CONFIG_BLK_DEV_RAM_SIZE=32768
 CONFIG_EEPROM_AT24=y
-CONFIG_IDE=m
-CONFIG_BLK_DEV_PALMCHIP_BK3710=m
-CONFIG_SCSI=m
 CONFIG_BLK_DEV_SD=m
 CONFIG_ATA=m
 CONFIG_AHCI_DA850=m
+CONFIG_PATA_BK3710=m
 CONFIG_NETDEVICES=y
 CONFIG_NETCONSOLE=y
 CONFIG_TUN=m
-- 
1.9.1

[PATCH v3 5/5] ARM: davinci_all_defconfig: convert to use libata PATA

[Bartlomiej Zolnierkiewicz]

From: Sekhar Nori <nsekhar@ti.com>

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts davinci_all_defconfig to use libata PATA
drivers.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
[b.zolnierkie: split from bigger patch + added patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 arch/arm/configs/davinci_all_defconfig | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index c8663ea..93aab3d 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -74,12 +74,10 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
 CONFIG_BLK_DEV_RAM_SIZE=32768
 CONFIG_EEPROM_AT24=y
-CONFIG_IDE=m
-CONFIG_BLK_DEV_PALMCHIP_BK3710=m
-CONFIG_SCSI=m
 CONFIG_BLK_DEV_SD=m
 CONFIG_ATA=m
 CONFIG_AHCI_DA850=m
+CONFIG_PATA_BK3710=m
 CONFIG_NETDEVICES=y
 CONFIG_NETCONSOLE=y
 CONFIG_TUN=m
-- 
1.9.1

Re: [PATCH v3 1/5] ata: add Palmchip BK3710 PATA controller driver

[Sergei Shtylyov]

Hello!

On 3/22/2017 9:20 PM, Bartlomiej Zolnierkiewicz wrote:

> Add Palmchip BK3710 PATA controller driver.
>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
[...]
> diff --git a/drivers/ata/pata_bk3710.c b/drivers/ata/pata_bk3710.c
> new file mode 100644
> index 0000000..1a1223f
> --- /dev/null
> +++ b/drivers/ata/pata_bk3710.c
> @@ -0,0 +1,382 @@
[...]
> +static int __init pata_bk3710_probe(struct platform_device *pdev)
> +{
> +	struct clk *clk;
> +	struct resource *mem;
> +	struct ata_host *host;
> +	struct ata_port *ap;
> +	void __iomem *base;
> +	unsigned long rate;
> +	int irq;
> +
> +	clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(clk))
> +		return -ENODEV;
> +
> +	clk_enable(clk);
> +	rate = clk_get_rate(clk);
> +	if (!rate)
> +		return -EINVAL;
> +
> +	/* NOTE:  round *down* to meet minimum timings; we count in clocks */
> +	ideclk_period = 1000000000UL / rate;
> +
> +	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);

    I'd put this close to devm_iorempe_resource() and would probably even get 
rid of 'mem' altogether...

[...]

Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

MBR, Sergei

[PATCH v3 1/5] ata: add Palmchip BK3710 PATA controller driver

[Sergei Shtylyov]

Hello!

On 3/22/2017 9:20 PM, Bartlomiej Zolnierkiewicz wrote:

> Add Palmchip BK3710 PATA controller driver.
>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
[...]
> diff --git a/drivers/ata/pata_bk3710.c b/drivers/ata/pata_bk3710.c
> new file mode 100644
> index 0000000..1a1223f
> --- /dev/null
> +++ b/drivers/ata/pata_bk3710.c
> @@ -0,0 +1,382 @@
[...]
> +static int __init pata_bk3710_probe(struct platform_device *pdev)
> +{
> +	struct clk *clk;
> +	struct resource *mem;
> +	struct ata_host *host;
> +	struct ata_port *ap;
> +	void __iomem *base;
> +	unsigned long rate;
> +	int irq;
> +
> +	clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(clk))
> +		return -ENODEV;
> +
> +	clk_enable(clk);
> +	rate = clk_get_rate(clk);
> +	if (!rate)
> +		return -EINVAL;
> +
> +	/* NOTE:  round *down* to meet minimum timings; we count in clocks */
> +	ideclk_period = 1000000000UL / rate;
> +
> +	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);

    I'd put this close to devm_iorempe_resource() and would probably even get 
rid of 'mem' altogether...

[...]

Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

MBR, Sergei

Re: [PATCH v3 2/5] pata_bk3710: disable IORDY Timer on chipset initialization

[Sergei Shtylyov]

On 3/22/2017 9:20 PM, Bartlomiej Zolnierkiewicz wrote:

> Disable IORDY Timer as the driver doesn't handle IORDY Timer
> interrupt anyway.
>
> Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

MBR, Sergei

Re: [PATCH v3 2/5] pata_bk3710: disable IORDY Timer on chipset initialization

[Sergei Shtylyov]

On 3/22/2017 9:20 PM, Bartlomiej Zolnierkiewicz wrote:

> Disable IORDY Timer as the driver doesn't handle IORDY Timer
> interrupt anyway.
>
> Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

MBR, Sergei

[PATCH v3 2/5] pata_bk3710: disable IORDY Timer on chipset initialization

[Sergei Shtylyov]

On 3/22/2017 9:20 PM, Bartlomiej Zolnierkiewicz wrote:

> Disable IORDY Timer as the driver doesn't handle IORDY Timer
> interrupt anyway.
>
> Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

MBR, Sergei

Re: [PATCH v3 3/5] pata_bk3710: clear status bits of BMISP on chipset initialization

[Sergei Shtylyov]

On 3/22/2017 9:21 PM, Bartlomiej Zolnierkiewicz wrote:

> Clear IORDYINT, INTRSTAT and DMAERROR bits of BMISP register
> (value '1' needs to be written to the bit to clear it).
>
> Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
[...]

Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

MBR, Sergei

[PATCH v3 3/5] pata_bk3710: clear status bits of BMISP on chipset initialization

[Sergei Shtylyov]

On 3/22/2017 9:21 PM, Bartlomiej Zolnierkiewicz wrote:

> Clear IORDYINT, INTRSTAT and DMAERROR bits of BMISP register
> (value '1' needs to be written to the bit to clear it).
>
> Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
[...]

Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

MBR, Sergei

Re: [PATCH v3 0/5] ATA/ARM: convert ARM/DaVinci to use libata PATA drivers

[Sekhar Nori]

On Wednesday 22 March 2017 11:50 PM, Bartlomiej Zolnierkiewicz wrote:
> Hi,
> 
> This patchset adds Palmchip BK3710 IDE controller driver to
> libata and switches ARM/DaVinci to use it (instead of the old
> IDE driver).
> 
> Sekhar, please check that it still works after changes, thanks.

Did some basic mount/read/write tests, it passed.

Thanks,
Sekhar

Re: [PATCH v3 0/5] ATA/ARM: convert ARM/DaVinci to use libata PATA drivers

[Sekhar Nori]

On Wednesday 22 March 2017 11:50 PM, Bartlomiej Zolnierkiewicz wrote:
> Hi,
> 
> This patchset adds Palmchip BK3710 IDE controller driver to
> libata and switches ARM/DaVinci to use it (instead of the old
> IDE driver).
> 
> Sekhar, please check that it still works after changes, thanks.

Did some basic mount/read/write tests, it passed.

Thanks,
Sekhar

[PATCH v3 0/5] ATA/ARM: convert ARM/DaVinci to use libata PATA drivers

[Sekhar Nori]

On Wednesday 22 March 2017 11:50 PM, Bartlomiej Zolnierkiewicz wrote:
> Hi,
> 
> This patchset adds Palmchip BK3710 IDE controller driver to
> libata and switches ARM/DaVinci to use it (instead of the old
> IDE driver).
> 
> Sekhar, please check that it still works after changes, thanks.

Did some basic mount/read/write tests, it passed.

Thanks,
Sekhar

Re: [PATCH v3 0/5] ATA/ARM: convert ARM/DaVinci to use libata PATA drivers

[Bartlomiej Zolnierkiewicz]

On Thursday, March 23, 2017 07:27:05 PM Sekhar Nori wrote:
> On Wednesday 22 March 2017 11:50 PM, Bartlomiej Zolnierkiewicz wrote:
> > Hi,
> > 
> > This patchset adds Palmchip BK3710 IDE controller driver to
> > libata and switches ARM/DaVinci to use it (instead of the old
> > IDE driver).
> > 
> > Sekhar, please check that it still works after changes, thanks.
> 
> Did some basic mount/read/write tests, it passed.

Thanks for checking.

I guess that you can merge the patchset now to your tree
(with Tejun's ACK for the whole patches and Sergei's ACK
for ATA changes).

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

[PATCH v3 0/5] ATA/ARM: convert ARM/DaVinci to use libata PATA drivers

[Bartlomiej Zolnierkiewicz]

On Thursday, March 23, 2017 07:27:05 PM Sekhar Nori wrote:
> On Wednesday 22 March 2017 11:50 PM, Bartlomiej Zolnierkiewicz wrote:
> > Hi,
> > 
> > This patchset adds Palmchip BK3710 IDE controller driver to
> > libata and switches ARM/DaVinci to use it (instead of the old
> > IDE driver).
> > 
> > Sekhar, please check that it still works after changes, thanks.
> 
> Did some basic mount/read/write tests, it passed.

Thanks for checking.

I guess that you can merge the patchset now to your tree
(with Tejun's ACK for the whole patches and Sergei's ACK
for ATA changes).

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

Re: [PATCH v3 0/5] ATA/ARM: convert ARM/DaVinci to use libata PATA drivers

[Tejun Heo]

On Fri, Mar 24, 2017 at 04:38:24PM +0100, Bartlomiej Zolnierkiewicz wrote:
> On Thursday, March 23, 2017 07:27:05 PM Sekhar Nori wrote:
> > On Wednesday 22 March 2017 11:50 PM, Bartlomiej Zolnierkiewicz wrote:
> > > Hi,
> > > 
> > > This patchset adds Palmchip BK3710 IDE controller driver to
> > > libata and switches ARM/DaVinci to use it (instead of the old
> > > IDE driver).
> > > 
> > > Sekhar, please check that it still works after changes, thanks.
> > 
> > Did some basic mount/read/write tests, it passed.
> 
> Thanks for checking.
> 
> I guess that you can merge the patchset now to your tree
> (with Tejun's ACK for the whole patches and Sergei's ACK
> for ATA changes).

Acked-by: Tejun Heo <tj@kernel.org>

Yeah, please feel free to route the series as you see fit.

Thanks.

-- 
tejun

Re: [PATCH v3 0/5] ATA/ARM: convert ARM/DaVinci to use libata PATA drivers

[Tejun Heo]

On Fri, Mar 24, 2017 at 04:38:24PM +0100, Bartlomiej Zolnierkiewicz wrote:
> On Thursday, March 23, 2017 07:27:05 PM Sekhar Nori wrote:
> > On Wednesday 22 March 2017 11:50 PM, Bartlomiej Zolnierkiewicz wrote:
> > > Hi,
> > > 
> > > This patchset adds Palmchip BK3710 IDE controller driver to
> > > libata and switches ARM/DaVinci to use it (instead of the old
> > > IDE driver).
> > > 
> > > Sekhar, please check that it still works after changes, thanks.
> > 
> > Did some basic mount/read/write tests, it passed.
> 
> Thanks for checking.
> 
> I guess that you can merge the patchset now to your tree
> (with Tejun's ACK for the whole patches and Sergei's ACK
> for ATA changes).

Acked-by: Tejun Heo <tj@kernel.org>

Yeah, please feel free to route the series as you see fit.

Thanks.

-- 
tejun

[PATCH v3 0/5] ATA/ARM: convert ARM/DaVinci to use libata PATA drivers

[Tejun Heo]

On Fri, Mar 24, 2017 at 04:38:24PM +0100, Bartlomiej Zolnierkiewicz wrote:
> On Thursday, March 23, 2017 07:27:05 PM Sekhar Nori wrote:
> > On Wednesday 22 March 2017 11:50 PM, Bartlomiej Zolnierkiewicz wrote:
> > > Hi,
> > > 
> > > This patchset adds Palmchip BK3710 IDE controller driver to
> > > libata and switches ARM/DaVinci to use it (instead of the old
> > > IDE driver).
> > > 
> > > Sekhar, please check that it still works after changes, thanks.
> > 
> > Did some basic mount/read/write tests, it passed.
> 
> Thanks for checking.
> 
> I guess that you can merge the patchset now to your tree
> (with Tejun's ACK for the whole patches and Sergei's ACK
> for ATA changes).

Acked-by: Tejun Heo <tj@kernel.org>

Yeah, please feel free to route the series as you see fit.

Thanks.

-- 
tejun

Re: [PATCH v3 0/5] ATA/ARM: convert ARM/DaVinci to use libata PATA drivers

[Sekhar Nori]

On Wednesday 29 March 2017 09:05 PM, Tejun Heo wrote:
> On Fri, Mar 24, 2017 at 04:38:24PM +0100, Bartlomiej Zolnierkiewicz wrote:
>> On Thursday, March 23, 2017 07:27:05 PM Sekhar Nori wrote:
>>> On Wednesday 22 March 2017 11:50 PM, Bartlomiej Zolnierkiewicz wrote:
>>>> Hi,
>>>>
>>>> This patchset adds Palmchip BK3710 IDE controller driver to
>>>> libata and switches ARM/DaVinci to use it (instead of the old
>>>> IDE driver).
>>>>
>>>> Sekhar, please check that it still works after changes, thanks.
>>>
>>> Did some basic mount/read/write tests, it passed.
>>
>> Thanks for checking.
>>
>> I guess that you can merge the patchset now to your tree
>> (with Tejun's ACK for the whole patches and Sergei's ACK
>> for ATA changes).
> 
> Acked-by: Tejun Heo <tj@kernel.org>
> 
> Yeah, please feel free to route the series as you see fit.

Series applied to my tree for v4.12 with Tejun and Sergei's acks added.

Thanks,
Sekhar

Re: [PATCH v3 0/5] ATA/ARM: convert ARM/DaVinci to use libata PATA drivers

[Sekhar Nori]

On Wednesday 29 March 2017 09:05 PM, Tejun Heo wrote:
> On Fri, Mar 24, 2017 at 04:38:24PM +0100, Bartlomiej Zolnierkiewicz wrote:
>> On Thursday, March 23, 2017 07:27:05 PM Sekhar Nori wrote:
>>> On Wednesday 22 March 2017 11:50 PM, Bartlomiej Zolnierkiewicz wrote:
>>>> Hi,
>>>>
>>>> This patchset adds Palmchip BK3710 IDE controller driver to
>>>> libata and switches ARM/DaVinci to use it (instead of the old
>>>> IDE driver).
>>>>
>>>> Sekhar, please check that it still works after changes, thanks.
>>>
>>> Did some basic mount/read/write tests, it passed.
>>
>> Thanks for checking.
>>
>> I guess that you can merge the patchset now to your tree
>> (with Tejun's ACK for the whole patches and Sergei's ACK
>> for ATA changes).
> 
> Acked-by: Tejun Heo <tj@kernel.org>
> 
> Yeah, please feel free to route the series as you see fit.

Series applied to my tree for v4.12 with Tejun and Sergei's acks added.

Thanks,
Sekhar

[PATCH v3 0/5] ATA/ARM: convert ARM/DaVinci to use libata PATA drivers

[Sekhar Nori]

On Wednesday 29 March 2017 09:05 PM, Tejun Heo wrote:
> On Fri, Mar 24, 2017 at 04:38:24PM +0100, Bartlomiej Zolnierkiewicz wrote:
>> On Thursday, March 23, 2017 07:27:05 PM Sekhar Nori wrote:
>>> On Wednesday 22 March 2017 11:50 PM, Bartlomiej Zolnierkiewicz wrote:
>>>> Hi,
>>>>
>>>> This patchset adds Palmchip BK3710 IDE controller driver to
>>>> libata and switches ARM/DaVinci to use it (instead of the old
>>>> IDE driver).
>>>>
>>>> Sekhar, please check that it still works after changes, thanks.
>>>
>>> Did some basic mount/read/write tests, it passed.
>>
>> Thanks for checking.
>>
>> I guess that you can merge the patchset now to your tree
>> (with Tejun's ACK for the whole patches and Sergei's ACK
>> for ATA changes).
> 
> Acked-by: Tejun Heo <tj@kernel.org>
> 
> Yeah, please feel free to route the series as you see fit.

Series applied to my tree for v4.12 with Tejun and Sergei's acks added.

Thanks,
Sekhar