[PATCH 4.10 00/17] 4.10.8-stable review

[PATCH 4.10 00/17] 4.10.8-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.10.8 release.
There are 17 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat Apr  1 09:59:07 UTC 2017.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.10.8-rc1.gz
or in the git tree and branch at:
  git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.10.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.10.8-rc1

Bin Liu <b-liu@ti.com>
    usb: musb: fix possible spinlock deadlock

Sebastian Andrzej Siewior <bigeasy@linutronix.de>
    sched/rt: Add a missing rescheduling point

Joe Carnuccio <joe.carnuccio@cavium.com>
    qla2xxx: Allow vref count to timeout on vport delete.

Dave Martin <Dave.Martin@arm.com>
    metag/ptrace: Reject partial NT_METAG_RPIPE writes

Dave Martin <Dave.Martin@arm.com>
    metag/ptrace: Provide default TXSTATUS for short NT_PRSTATUS

Dave Martin <Dave.Martin@arm.com>
    metag/ptrace: Preserve previous registers for short regset write

Dave Martin <Dave.Martin@arm.com>
    sparc/ptrace: Preserve previous registers for short regset write

Dave Martin <Dave.Martin@arm.com>
    mips/ptrace: Preserve previous registers for short regset write

Dave Martin <Dave.Martin@arm.com>
    h8300/ptrace: Fix incorrect register transfer count

Dave Martin <Dave.Martin@arm.com>
    c6x/ptrace: Remove useless PTRACE_SETREGSET implementation

Bjorn Andersson <bjorn.andersson@linaro.org>
    pinctrl: qcom: Don't clear status bit on irq_unmask

Ladi Prosek <lprosek@redhat.com>
    virtio_balloon: init 1st buffer in stats vq

Paolo Bonzini <pbonzini@redhat.com>
    KVM: x86: cleanup the page tracking SRCU instance

Wanpeng Li <wanpeng.li@hotmail.com>
    KVM: nVMX: Fix nested VPID vmx exec control

Andy Whitcroft <apw@canonical.com>
    xfrm_user: validate XFRM_MSG_NEWAE incoming ESN size harder

Andy Whitcroft <apw@canonical.com>
    xfrm_user: validate XFRM_MSG_NEWAE XFRMA_REPLAY_ESN_VAL replay_window

Florian Westphal <fw@strlen.de>
    xfrm: policy: init locks early


-------------

Diffstat:

 Makefile                              |  4 ++--
 arch/c6x/kernel/ptrace.c              | 41 -----------------------------------
 arch/h8300/kernel/ptrace.c            |  8 ++++---
 arch/metag/kernel/ptrace.c            | 19 ++++++++++++----
 arch/mips/kernel/ptrace.c             |  3 ++-
 arch/sparc/kernel/ptrace_64.c         |  2 +-
 arch/x86/include/asm/kvm_page_track.h |  1 +
 arch/x86/kvm/page_track.c             |  8 +++++++
 arch/x86/kvm/vmx.c                    |  7 +++---
 arch/x86/kvm/x86.c                    |  1 +
 drivers/pinctrl/qcom/pinctrl-msm.c    |  4 ----
 drivers/scsi/qla2xxx/qla_attr.c       |  4 +---
 drivers/scsi/qla2xxx/qla_def.h        |  6 ++++-
 drivers/scsi/qla2xxx/qla_init.c       |  1 +
 drivers/scsi/qla2xxx/qla_mid.c        | 14 +++++++-----
 drivers/scsi/qla2xxx/qla_os.c         |  1 +
 drivers/usb/musb/musb_core.c          |  2 +-
 drivers/virtio/virtio_balloon.c       |  2 ++
 kernel/sched/deadline.c               |  3 +--
 kernel/sched/rt.c                     |  3 +--
 net/xfrm/xfrm_policy.c                | 10 ++++-----
 net/xfrm/xfrm_user.c                  |  9 +++++++-
 22 files changed, 73 insertions(+), 80 deletions(-)

[PATCH 4.10 01/17] xfrm: policy: init locks early

[Greg Kroah-Hartman]

4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Westphal <fw@strlen.de>

commit c282222a45cb9503cbfbebfdb60491f06ae84b49 upstream.

Dmitry reports following splat:
 INFO: trying to register non-static key.
 the code is fine but needs lockdep annotation.
 turning off the locking correctness validator.
 CPU: 0 PID: 13059 Comm: syz-executor1 Not tainted 4.10.0-rc7-next-20170207 #1
[..]
 spin_lock_bh include/linux/spinlock.h:304 [inline]
 xfrm_policy_flush+0x32/0x470 net/xfrm/xfrm_policy.c:963
 xfrm_policy_fini+0xbf/0x560 net/xfrm/xfrm_policy.c:3041
 xfrm_net_init+0x79f/0x9e0 net/xfrm/xfrm_policy.c:3091
 ops_init+0x10a/0x530 net/core/net_namespace.c:115
 setup_net+0x2ed/0x690 net/core/net_namespace.c:291
 copy_net_ns+0x26c/0x530 net/core/net_namespace.c:396
 create_new_namespaces+0x409/0x860 kernel/nsproxy.c:106
 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:205
 SYSC_unshare kernel/fork.c:2281 [inline]

Problem is that when we get error during xfrm_net_init we will call
xfrm_policy_fini which will acquire xfrm_policy_lock before it was
initialized.  Just move it around so locks get set up first.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: 283bc9f35bbbcb0e9 ("xfrm: Namespacify xfrm state/policy locks")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/xfrm/xfrm_policy.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -3062,6 +3062,11 @@ static int __net_init xfrm_net_init(stru
 {
 	int rv;
 
+	/* Initialize the per-net locks here */
+	spin_lock_init(&net->xfrm.xfrm_state_lock);
+	spin_lock_init(&net->xfrm.xfrm_policy_lock);
+	mutex_init(&net->xfrm.xfrm_cfg_mutex);
+
 	rv = xfrm_statistics_init(net);
 	if (rv < 0)
 		goto out_statistics;
@@ -3078,11 +3083,6 @@ static int __net_init xfrm_net_init(stru
 	if (rv < 0)
 		goto out;
 
-	/* Initialize the per-net locks here */
-	spin_lock_init(&net->xfrm.xfrm_state_lock);
-	spin_lock_init(&net->xfrm.xfrm_policy_lock);
-	mutex_init(&net->xfrm.xfrm_cfg_mutex);
-
 	return 0;
 
 out:

[PATCH 4.10 02/17] xfrm_user: validate XFRM_MSG_NEWAE XFRMA_REPLAY_ESN_VAL replay_window

[Greg Kroah-Hartman]

4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Whitcroft <apw@canonical.com>

commit 677e806da4d916052585301785d847c3b3e6186a upstream.

When a new xfrm state is created during an XFRM_MSG_NEWSA call we
validate the user supplied replay_esn to ensure that the size is valid
and to ensure that the replay_window size is within the allocated
buffer.  However later it is possible to update this replay_esn via a
XFRM_MSG_NEWAE call.  There we again validate the size of the supplied
buffer matches the existing state and if so inject the contents.  We do
not at this point check that the replay_window is within the allocated
memory.  This leads to out-of-bounds reads and writes triggered by
netlink packets.  This leads to memory corruption and the potential for
priviledge escalation.

We already attempt to validate the incoming replay information in
xfrm_new_ae() via xfrm_replay_verify_len().  This confirms that the user
is not trying to change the size of the replay state buffer which
includes the replay_esn.  It however does not check the replay_window
remains within that buffer.  Add validation of the contained
replay_window.

CVE-2017-7184
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/xfrm/xfrm_user.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -415,6 +415,9 @@ static inline int xfrm_replay_verify_len
 	if (nla_len(rp) < ulen || xfrm_replay_state_esn_len(replay_esn) != ulen)
 		return -EINVAL;
 
+	if (up->replay_window > up->bmp_len * sizeof(__u32) * 8)
+		return -EINVAL;
+
 	return 0;
 }
 

[PATCH 4.10 03/17] xfrm_user: validate XFRM_MSG_NEWAE incoming ESN size harder

[Greg Kroah-Hartman]

4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Whitcroft <apw@canonical.com>

commit f843ee6dd019bcece3e74e76ad9df0155655d0df upstream.

Kees Cook has pointed out that xfrm_replay_state_esn_len() is subject to
wrapping issues.  To ensure we are correctly ensuring that the two ESN
structures are the same size compare both the overall size as reported
by xfrm_replay_state_esn_len() and the internal length are the same.

CVE-2017-7184
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/xfrm/xfrm_user.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -412,7 +412,11 @@ static inline int xfrm_replay_verify_len
 	up = nla_data(rp);
 	ulen = xfrm_replay_state_esn_len(up);
 
-	if (nla_len(rp) < ulen || xfrm_replay_state_esn_len(replay_esn) != ulen)
+	/* Check the overall length and the internal bitmap length to avoid
+	 * potential overflow. */
+	if (nla_len(rp) < ulen ||
+	    xfrm_replay_state_esn_len(replay_esn) != ulen ||
+	    replay_esn->bmp_len != up->bmp_len)
 		return -EINVAL;
 
 	if (up->replay_window > up->bmp_len * sizeof(__u32) * 8)

[PATCH 4.10 05/17] KVM: x86: cleanup the page tracking SRCU instance

[Greg Kroah-Hartman]

4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Bonzini <pbonzini@redhat.com>

commit 2beb6dad2e8f95d710159d5befb390e4f62ab5cf upstream.

SRCU uses a delayed work item.  Skip cleaning it up, and
the result is use-after-free in the work item callbacks.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: 0eb05bf290cfe8610d9680b49abef37febd1c38a
Reviewed-by: Xiao Guangrong <xiaoguangrong.eric@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/kvm_page_track.h |    1 +
 arch/x86/kvm/page_track.c             |    8 ++++++++
 arch/x86/kvm/x86.c                    |    1 +
 3 files changed, 10 insertions(+)

--- a/arch/x86/include/asm/kvm_page_track.h
+++ b/arch/x86/include/asm/kvm_page_track.h
@@ -46,6 +46,7 @@ struct kvm_page_track_notifier_node {
 };
 
 void kvm_page_track_init(struct kvm *kvm);
+void kvm_page_track_cleanup(struct kvm *kvm);
 
 void kvm_page_track_free_memslot(struct kvm_memory_slot *free,
 				 struct kvm_memory_slot *dont);
--- a/arch/x86/kvm/page_track.c
+++ b/arch/x86/kvm/page_track.c
@@ -158,6 +158,14 @@ bool kvm_page_track_is_active(struct kvm
 	return !!ACCESS_ONCE(slot->arch.gfn_track[mode][index]);
 }
 
+void kvm_page_track_cleanup(struct kvm *kvm)
+{
+	struct kvm_page_track_notifier_head *head;
+
+	head = &kvm->arch.track_notifier_head;
+	cleanup_srcu_struct(&head->track_srcu);
+}
+
 void kvm_page_track_init(struct kvm *kvm)
 {
 	struct kvm_page_track_notifier_head *head;
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -8052,6 +8052,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm
 	kvm_free_vcpus(kvm);
 	kvfree(rcu_dereference_check(kvm->arch.apic_map, 1));
 	kvm_mmu_uninit_vm(kvm);
+	kvm_page_track_cleanup(kvm);
 }
 
 void kvm_arch_free_memslot(struct kvm *kvm, struct kvm_memory_slot *free,

[PATCH 4.10 06/17] virtio_balloon: init 1st buffer in stats vq

[Greg Kroah-Hartman]

4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ladi Prosek <lprosek@redhat.com>

commit fc8653228c8588a120f6b5dad6983b7b61ff669e upstream.

When init_vqs runs, virtio_balloon.stats is either uninitialized or
contains stale values. The host updates its state with garbage data
because it has no way of knowing that this is just a marker buffer
used for signaling.

This patch updates the stats before pushing the initial buffer.

Alternative fixes:
* Push an empty buffer in init_vqs. Not easily done with the current
  virtio implementation and violates the spec "Driver MUST supply the
  same subset of statistics in all buffers submitted to the statsq".
* Push a buffer with invalid tags in init_vqs. Violates the same
  spec clause, plus "invalid tag" is not really defined.

Note: the spec says:
	When using the legacy interface, the device SHOULD ignore all values in
	the first buffer in the statsq supplied by the driver after device
	initialization. Note: Historically, drivers supplied an uninitialized
	buffer in the first buffer.

Unfortunately QEMU does not seem to implement the recommendation
even for the legacy interface.

Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/virtio/virtio_balloon.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -427,6 +427,8 @@ static int init_vqs(struct virtio_balloo
 		 * Prime this virtqueue with one buffer so the hypervisor can
 		 * use it to signal us later (it can't be broken yet!).
 		 */
+		update_balloon_stats(vb);
+
 		sg_init_one(&sg, vb->stats, sizeof vb->stats);
 		if (virtqueue_add_outbuf(vb->stats_vq, &sg, 1, vb, GFP_KERNEL)
 		    < 0)

[PATCH 4.10 07/17] pinctrl: qcom: Dont clear status bit on irq_unmask

[Greg Kroah-Hartman]

4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjorn Andersson <bjorn.andersson@linaro.org>

commit a6566710adaa4a7dd5e0d99820ff9c9c30ee5951 upstream.

Clearing the status bit on irq_unmask will discard any pending interrupt
that did arrive after the irq_ack, i.e. while the IRQ handler function
was executing.

Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver")
Cc: Stephen Boyd <sboyd@codeaurora.org>
Reported-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pinctrl/qcom/pinctrl-msm.c |    4 ----
 1 file changed, 4 deletions(-)

--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -594,10 +594,6 @@ static void msm_gpio_irq_unmask(struct i
 
 	spin_lock_irqsave(&pctrl->lock, flags);
 
-	val = readl(pctrl->regs + g->intr_status_reg);
-	val &= ~BIT(g->intr_status_bit);
-	writel(val, pctrl->regs + g->intr_status_reg);
-
 	val = readl(pctrl->regs + g->intr_cfg_reg);
 	val |= BIT(g->intr_enable_bit);
 	writel(val, pctrl->regs + g->intr_cfg_reg);

[PATCH 4.10 08/17] c6x/ptrace: Remove useless PTRACE_SETREGSET implementation

[Greg Kroah-Hartman]

4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Martin <Dave.Martin@arm.com>

commit fb411b837b587a32046dc4f369acb93a10b1def8 upstream.

gpr_set won't work correctly and can never have been tested, and the
correct behaviour is not clear due to the endianness-dependent task
layout.

So, just remove it.  The core code will now return -EOPNOTSUPPORT when
trying to set NT_PRSTATUS on this architecture until/unless a correct
implementation is supplied.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/c6x/kernel/ptrace.c |   41 -----------------------------------------
 1 file changed, 41 deletions(-)

--- a/arch/c6x/kernel/ptrace.c
+++ b/arch/c6x/kernel/ptrace.c
@@ -69,46 +69,6 @@ static int gpr_get(struct task_struct *t
 				   0, sizeof(*regs));
 }
 
-static int gpr_set(struct task_struct *target,
-		   const struct user_regset *regset,
-		   unsigned int pos, unsigned int count,
-		   const void *kbuf, const void __user *ubuf)
-{
-	int ret;
-	struct pt_regs *regs = task_pt_regs(target);
-
-	/* Don't copyin TSR or CSR */
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &regs,
-				 0, PT_TSR * sizeof(long));
-	if (ret)
-		return ret;
-
-	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
-					PT_TSR * sizeof(long),
-					(PT_TSR + 1) * sizeof(long));
-	if (ret)
-		return ret;
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &regs,
-				 (PT_TSR + 1) * sizeof(long),
-				 PT_CSR * sizeof(long));
-	if (ret)
-		return ret;
-
-	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
-					PT_CSR * sizeof(long),
-					(PT_CSR + 1) * sizeof(long));
-	if (ret)
-		return ret;
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &regs,
-				 (PT_CSR + 1) * sizeof(long), -1);
-	return ret;
-}
-
 enum c6x_regset {
 	REGSET_GPR,
 };
@@ -120,7 +80,6 @@ static const struct user_regset c6x_regs
 		.size = sizeof(u32),
 		.align = sizeof(u32),
 		.get = gpr_get,
-		.set = gpr_set
 	},
 };
 

[PATCH 4.10 09/17] h8300/ptrace: Fix incorrect register transfer count

[Greg Kroah-Hartman]

4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Martin <Dave.Martin@arm.com>

commit 502585c7555083d4a949c08350306b9ec196779e upstream.

regs_set() and regs_get() are vulnerable to an off-by-1 buffer overrun
if CONFIG_CPU_H8S is set, since this adds an extra entry to
register_offset[] but not to user_regs_struct.

So, iterate over user_regs_struct based on its actual size, not based on
the length of register_offset[].

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/h8300/kernel/ptrace.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/arch/h8300/kernel/ptrace.c
+++ b/arch/h8300/kernel/ptrace.c
@@ -95,7 +95,8 @@ static int regs_get(struct task_struct *
 	long *reg = (long *)&regs;
 
 	/* build user regs in buffer */
-	for (r = 0; r < ARRAY_SIZE(register_offset); r++)
+	BUILD_BUG_ON(sizeof(regs) % sizeof(long) != 0);
+	for (r = 0; r < sizeof(regs) / sizeof(long); r++)
 		*reg++ = h8300_get_reg(target, r);
 
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
@@ -113,7 +114,8 @@ static int regs_set(struct task_struct *
 	long *reg;
 
 	/* build user regs in buffer */
-	for (reg = (long *)&regs, r = 0; r < ARRAY_SIZE(register_offset); r++)
+	BUILD_BUG_ON(sizeof(regs) % sizeof(long) != 0);
+	for (reg = (long *)&regs, r = 0; r < sizeof(regs) / sizeof(long); r++)
 		*reg++ = h8300_get_reg(target, r);
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
@@ -122,7 +124,7 @@ static int regs_set(struct task_struct *
 		return ret;
 
 	/* write back to pt_regs */
-	for (reg = (long *)&regs, r = 0; r < ARRAY_SIZE(register_offset); r++)
+	for (reg = (long *)&regs, r = 0; r < sizeof(regs) / sizeof(long); r++)
 		h8300_put_reg(target, r, *reg++);
 	return 0;
 }

[PATCH 4.10 10/17] mips/ptrace: Preserve previous registers for short regset write

[Greg Kroah-Hartman]

4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Martin <Dave.Martin@arm.com>

commit d614fd58a2834cfe4efa472c33c8f3ce2338b09b upstream.

Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the registers, the thread's old registers are preserved.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/ptrace.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -485,7 +485,8 @@ static int fpr_set(struct task_struct *t
 					  &target->thread.fpu,
 					  0, sizeof(elf_fpregset_t));
 
-	for (i = 0; i < NUM_FPU_REGS; i++) {
+	BUILD_BUG_ON(sizeof(fpr_val) != sizeof(elf_fpreg_t));
+	for (i = 0; i < NUM_FPU_REGS && count >= sizeof(elf_fpreg_t); i++) {
 		err = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 					 &fpr_val, i * sizeof(elf_fpreg_t),
 					 (i + 1) * sizeof(elf_fpreg_t));

[PATCH 4.10 11/17] sparc/ptrace: Preserve previous registers for short regset write

[Greg Kroah-Hartman]

4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Martin <Dave.Martin@arm.com>

commit d3805c546b275c8cc7d40f759d029ae92c7175f2 upstream.

Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the registers, the thread's old registers are preserved.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/sparc/kernel/ptrace_64.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/sparc/kernel/ptrace_64.c
+++ b/arch/sparc/kernel/ptrace_64.c
@@ -350,7 +350,7 @@ static int genregs64_set(struct task_str
 	}
 
 	if (!ret) {
-		unsigned long y;
+		unsigned long y = regs->y;
 
 		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 					 &y,

[PATCH 4.10 12/17] metag/ptrace: Preserve previous registers for short regset write

[Greg Kroah-Hartman]

4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Martin <Dave.Martin@arm.com>

commit a78ce80d2c9178351b34d78fec805140c29c193e upstream.

Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the registers, the thread's old registers are preserved.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/metag/kernel/ptrace.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/metag/kernel/ptrace.c
+++ b/arch/metag/kernel/ptrace.c
@@ -303,7 +303,7 @@ static int metag_tls_set(struct task_str
 			const void *kbuf, const void __user *ubuf)
 {
 	int ret;
-	void __user *tls;
+	void __user *tls = target->thread.tls_ptr;
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &tls, 0, -1);
 	if (ret)

[PATCH 4.10 13/17] metag/ptrace: Provide default TXSTATUS for short NT_PRSTATUS

[Greg Kroah-Hartman]

4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Martin <Dave.Martin@arm.com>

commit 5fe81fe98123ce41265c65e95d34418d30d005d1 upstream.

Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill TXSTATUS, a well-defined default value is used, based on the
task's current value.

Suggested-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/metag/kernel/ptrace.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

--- a/arch/metag/kernel/ptrace.c
+++ b/arch/metag/kernel/ptrace.c
@@ -24,6 +24,16 @@
  * user_regset definitions.
  */
 
+static unsigned long user_txstatus(const struct pt_regs *regs)
+{
+	unsigned long data = (unsigned long)regs->ctx.Flags;
+
+	if (regs->ctx.SaveMask & TBICTX_CBUF_BIT)
+		data |= USER_GP_REGS_STATUS_CATCH_BIT;
+
+	return data;
+}
+
 int metag_gp_regs_copyout(const struct pt_regs *regs,
 			  unsigned int pos, unsigned int count,
 			  void *kbuf, void __user *ubuf)
@@ -62,9 +72,7 @@ int metag_gp_regs_copyout(const struct p
 	if (ret)
 		goto out;
 	/* TXSTATUS */
-	data = (unsigned long)regs->ctx.Flags;
-	if (regs->ctx.SaveMask & TBICTX_CBUF_BIT)
-		data |= USER_GP_REGS_STATUS_CATCH_BIT;
+	data = user_txstatus(regs);
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				  &data, 4*25, 4*26);
 	if (ret)
@@ -119,6 +127,7 @@ int metag_gp_regs_copyin(struct pt_regs
 	if (ret)
 		goto out;
 	/* TXSTATUS */
+	data = user_txstatus(regs);
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 &data, 4*25, 4*26);
 	if (ret)

[PATCH 4.10 14/17] metag/ptrace: Reject partial NT_METAG_RPIPE writes

[Greg Kroah-Hartman]

4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Martin <Dave.Martin@arm.com>

commit 7195ee3120d878259e8d94a5d9f808116f34d5ea upstream.

It's not clear what behaviour is sensible when doing partial write of
NT_METAG_RPIPE, so just don't bother.

This patch assumes that userspace will never rely on a partial SETREGSET
in this case, since it's not clear what should happen anyway.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/metag/kernel/ptrace.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/metag/kernel/ptrace.c
+++ b/arch/metag/kernel/ptrace.c
@@ -253,6 +253,8 @@ int metag_rp_state_copyin(struct pt_regs
 	unsigned long long *ptr;
 	int ret, i;
 
+	if (count < 4*13)
+		return -EINVAL;
 	/* Read the entire pipeline before making any changes */
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 &rp, 0, 4*13);

[PATCH 4.10 15/17] qla2xxx: Allow vref count to timeout on vport delete.

[Greg Kroah-Hartman]

4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joe Carnuccio <joe.carnuccio@cavium.com>

commit c4a9b538ab2a109c5f9798bea1f8f4bf93aadfb9 upstream.

Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/qla2xxx/qla_attr.c |    4 +---
 drivers/scsi/qla2xxx/qla_def.h  |    6 +++++-
 drivers/scsi/qla2xxx/qla_init.c |    1 +
 drivers/scsi/qla2xxx/qla_mid.c  |   14 ++++++++------
 drivers/scsi/qla2xxx/qla_os.c   |    1 +
 5 files changed, 16 insertions(+), 10 deletions(-)

--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -2154,8 +2154,6 @@ qla24xx_vport_delete(struct fc_vport *fc
 		    "Timer for the VP[%d] has stopped\n", vha->vp_idx);
 	}
 
-	BUG_ON(atomic_read(&vha->vref_count));
-
 	qla2x00_free_fcports(vha);
 
 	mutex_lock(&ha->vport_lock);
@@ -2163,7 +2161,7 @@ qla24xx_vport_delete(struct fc_vport *fc
 	clear_bit(vha->vp_idx, ha->vp_idx_map);
 	mutex_unlock(&ha->vport_lock);
 
-	if (vha->qpair->vp_idx == vha->vp_idx) {
+	if (vha->qpair && vha->qpair->vp_idx == vha->vp_idx) {
 		if (qla2xxx_delete_qpair(vha, vha->qpair) != QLA_SUCCESS)
 			ql_log(ql_log_warn, vha, 0x7087,
 			    "Queue Pair delete failed.\n");
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -3788,6 +3788,7 @@ typedef struct scsi_qla_host {
 	struct qla8044_reset_template reset_tmplt;
 	struct qla_tgt_counters tgt_counters;
 	uint16_t	bbcr;
+	wait_queue_head_t vref_waitq;
 } scsi_qla_host_t;
 
 struct qla27xx_image_status {
@@ -3843,14 +3844,17 @@ struct qla2_sgx {
 	mb();						\
 	if (__vha->flags.delete_progress) {		\
 		atomic_dec(&__vha->vref_count);		\
+		wake_up(&__vha->vref_waitq);		\
 		__bail = 1;				\
 	} else {					\
 		__bail = 0;				\
 	}						\
 } while (0)
 
-#define QLA_VHA_MARK_NOT_BUSY(__vha)			\
+#define QLA_VHA_MARK_NOT_BUSY(__vha) do {		\
 	atomic_dec(&__vha->vref_count);			\
+	wake_up(&__vha->vref_waitq);			\
+} while (0)						\
 
 #define QLA_QPAIR_MARK_BUSY(__qpair, __bail) do {	\
 	atomic_inc(&__qpair->ref_count);		\
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -4352,6 +4352,7 @@ qla2x00_update_fcports(scsi_qla_host_t *
 			}
 		}
 		atomic_dec(&vha->vref_count);
+		wake_up(&vha->vref_waitq);
 	}
 	spin_unlock_irqrestore(&ha->vport_slock, flags);
 }
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -74,13 +74,14 @@ qla24xx_deallocate_vp_id(scsi_qla_host_t
 	 * ensures no active vp_list traversal while the vport is removed
 	 * from the queue)
 	 */
-	spin_lock_irqsave(&ha->vport_slock, flags);
-	while (atomic_read(&vha->vref_count)) {
-		spin_unlock_irqrestore(&ha->vport_slock, flags);
-
-		msleep(500);
+	wait_event_timeout(vha->vref_waitq, atomic_read(&vha->vref_count),
+	    10*HZ);
 
-		spin_lock_irqsave(&ha->vport_slock, flags);
+	spin_lock_irqsave(&ha->vport_slock, flags);
+	if (atomic_read(&vha->vref_count)) {
+		ql_dbg(ql_dbg_vport, vha, 0xfffa,
+		    "vha->vref_count=%u timeout\n", vha->vref_count.counter);
+		vha->vref_count = (atomic_t)ATOMIC_INIT(0);
 	}
 	list_del(&vha->list);
 	qlt_update_vp_map(vha, RESET_VP_IDX);
@@ -269,6 +270,7 @@ qla2x00_alert_all_vps(struct rsp_que *rs
 
 			spin_lock_irqsave(&ha->vport_slock, flags);
 			atomic_dec(&vha->vref_count);
+			wake_up(&vha->vref_waitq);
 		}
 		i++;
 	}
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -4215,6 +4215,7 @@ struct scsi_qla_host *qla2x00_create_hos
 
 	spin_lock_init(&vha->work_lock);
 	spin_lock_init(&vha->cmd_list_lock);
+	init_waitqueue_head(&vha->vref_waitq);
 
 	sprintf(vha->host_str, "%s_%ld", QLA2XXX_DRIVER_NAME, vha->host_no);
 	ql_dbg(ql_dbg_init, vha, 0x0041,

Re: [PATCH 4.10 15/17] qla2xxx: Allow vref count to timeout on vport delete.

[Nicholas A. Bellinger]

Hi Joe + Himanshu,

Thanks for backporting this patch to apply to v4.10.y.

I haven't seen it queued to v4.9.y yet though, would you be so kind to
send out a v4.9.y backport as well to Greg-KH + stable team so it can be
picked up for earlier stable versions too..?

Thank you,

On Thu, 2017-03-30 at 12:00 +0200, Greg Kroah-Hartman wrote:
> 4.10-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Joe Carnuccio <joe.carnuccio@cavium.com>
> 
> commit c4a9b538ab2a109c5f9798bea1f8f4bf93aadfb9 upstream.
> 
> Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 
> ---
>  drivers/scsi/qla2xxx/qla_attr.c |    4 +---
>  drivers/scsi/qla2xxx/qla_def.h  |    6 +++++-
>  drivers/scsi/qla2xxx/qla_init.c |    1 +
>  drivers/scsi/qla2xxx/qla_mid.c  |   14 ++++++++------
>  drivers/scsi/qla2xxx/qla_os.c   |    1 +
>  5 files changed, 16 insertions(+), 10 deletions(-)
> 
> --- a/drivers/scsi/qla2xxx/qla_attr.c
> +++ b/drivers/scsi/qla2xxx/qla_attr.c
> @@ -2154,8 +2154,6 @@ qla24xx_vport_delete(struct fc_vport *fc
>  		    "Timer for the VP[%d] has stopped\n", vha->vp_idx);
>  	}
>  
> -	BUG_ON(atomic_read(&vha->vref_count));
> -
>  	qla2x00_free_fcports(vha);
>  
>  	mutex_lock(&ha->vport_lock);
> @@ -2163,7 +2161,7 @@ qla24xx_vport_delete(struct fc_vport *fc
>  	clear_bit(vha->vp_idx, ha->vp_idx_map);
>  	mutex_unlock(&ha->vport_lock);
>  
> -	if (vha->qpair->vp_idx == vha->vp_idx) {
> +	if (vha->qpair && vha->qpair->vp_idx == vha->vp_idx) {
>  		if (qla2xxx_delete_qpair(vha, vha->qpair) != QLA_SUCCESS)
>  			ql_log(ql_log_warn, vha, 0x7087,
>  			    "Queue Pair delete failed.\n");
> --- a/drivers/scsi/qla2xxx/qla_def.h
> +++ b/drivers/scsi/qla2xxx/qla_def.h
> @@ -3788,6 +3788,7 @@ typedef struct scsi_qla_host {
>  	struct qla8044_reset_template reset_tmplt;
>  	struct qla_tgt_counters tgt_counters;
>  	uint16_t	bbcr;
> +	wait_queue_head_t vref_waitq;
>  } scsi_qla_host_t;
>  
>  struct qla27xx_image_status {
> @@ -3843,14 +3844,17 @@ struct qla2_sgx {
>  	mb();						\
>  	if (__vha->flags.delete_progress) {		\
>  		atomic_dec(&__vha->vref_count);		\
> +		wake_up(&__vha->vref_waitq);		\
>  		__bail = 1;				\
>  	} else {					\
>  		__bail = 0;				\
>  	}						\
>  } while (0)
>  
> -#define QLA_VHA_MARK_NOT_BUSY(__vha)			\
> +#define QLA_VHA_MARK_NOT_BUSY(__vha) do {		\
>  	atomic_dec(&__vha->vref_count);			\
> +	wake_up(&__vha->vref_waitq);			\
> +} while (0)						\
>  
>  #define QLA_QPAIR_MARK_BUSY(__qpair, __bail) do {	\
>  	atomic_inc(&__qpair->ref_count);		\
> --- a/drivers/scsi/qla2xxx/qla_init.c
> +++ b/drivers/scsi/qla2xxx/qla_init.c
> @@ -4352,6 +4352,7 @@ qla2x00_update_fcports(scsi_qla_host_t *
>  			}
>  		}
>  		atomic_dec(&vha->vref_count);
> +		wake_up(&vha->vref_waitq);
>  	}
>  	spin_unlock_irqrestore(&ha->vport_slock, flags);
>  }
> --- a/drivers/scsi/qla2xxx/qla_mid.c
> +++ b/drivers/scsi/qla2xxx/qla_mid.c
> @@ -74,13 +74,14 @@ qla24xx_deallocate_vp_id(scsi_qla_host_t
>  	 * ensures no active vp_list traversal while the vport is removed
>  	 * from the queue)
>  	 */
> -	spin_lock_irqsave(&ha->vport_slock, flags);
> -	while (atomic_read(&vha->vref_count)) {
> -		spin_unlock_irqrestore(&ha->vport_slock, flags);
> -
> -		msleep(500);
> +	wait_event_timeout(vha->vref_waitq, atomic_read(&vha->vref_count),
> +	    10*HZ);
>  
> -		spin_lock_irqsave(&ha->vport_slock, flags);
> +	spin_lock_irqsave(&ha->vport_slock, flags);
> +	if (atomic_read(&vha->vref_count)) {
> +		ql_dbg(ql_dbg_vport, vha, 0xfffa,
> +		    "vha->vref_count=%u timeout\n", vha->vref_count.counter);
> +		vha->vref_count = (atomic_t)ATOMIC_INIT(0);
>  	}
>  	list_del(&vha->list);
>  	qlt_update_vp_map(vha, RESET_VP_IDX);
> @@ -269,6 +270,7 @@ qla2x00_alert_all_vps(struct rsp_que *rs
>  
>  			spin_lock_irqsave(&ha->vport_slock, flags);
>  			atomic_dec(&vha->vref_count);
> +			wake_up(&vha->vref_waitq);
>  		}
>  		i++;
>  	}
> --- a/drivers/scsi/qla2xxx/qla_os.c
> +++ b/drivers/scsi/qla2xxx/qla_os.c
> @@ -4215,6 +4215,7 @@ struct scsi_qla_host *qla2x00_create_hos
>  
>  	spin_lock_init(&vha->work_lock);
>  	spin_lock_init(&vha->cmd_list_lock);
> +	init_waitqueue_head(&vha->vref_waitq);
>  
>  	sprintf(vha->host_str, "%s_%ld", QLA2XXX_DRIVER_NAME, vha->host_no);
>  	ql_dbg(ql_dbg_init, vha, 0x0041,
> 
> 

[PATCH 4.10 16/17] sched/rt: Add a missing rescheduling point

[Greg Kroah-Hartman]

4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

commit 619bd4a71874a8fd78eb6ccf9f272c5e98bcc7b7 upstream.

Since the change in commit:

  fd7a4bed1835 ("sched, rt: Convert switched_{from, to}_rt() / prio_changed_rt() to balance callbacks")

... we don't reschedule a task under certain circumstances:

Lets say task-A, SCHED_OTHER, is running on CPU0 (and it may run only on
CPU0) and holds a PI lock. This task is removed from the CPU because it
used up its time slice and another SCHED_OTHER task is running. Task-B on
CPU1 runs at RT priority and asks for the lock owned by task-A. This
results in a priority boost for task-A. Task-B goes to sleep until the
lock has been made available. Task-A is already runnable (but not active),
so it receives no wake up.

The reality now is that task-A gets on the CPU once the scheduler decides
to remove the current task despite the fact that a high priority task is
enqueued and waiting. This may take a long time.

The desired behaviour is that CPU0 immediately reschedules after the
priority boost which made task-A the task with the lowest priority.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: fd7a4bed1835 ("sched, rt: Convert switched_{from, to}_rt() prio_changed_rt() to balance callbacks")
Link: http://lkml.kernel.org/r/20170124144006.29821-1-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/sched/deadline.c |    3 +--
 kernel/sched/rt.c       |    3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

--- a/kernel/sched/deadline.c
+++ b/kernel/sched/deadline.c
@@ -1729,12 +1729,11 @@ static void switched_to_dl(struct rq *rq
 #ifdef CONFIG_SMP
 		if (tsk_nr_cpus_allowed(p) > 1 && rq->dl.overloaded)
 			queue_push_tasks(rq);
-#else
+#endif
 		if (dl_task(rq->curr))
 			check_preempt_curr_dl(rq, p, 0);
 		else
 			resched_curr(rq);
-#endif
 	}
 }
 
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -2198,10 +2198,9 @@ static void switched_to_rt(struct rq *rq
 #ifdef CONFIG_SMP
 		if (tsk_nr_cpus_allowed(p) > 1 && rq->rt.overloaded)
 			queue_push_tasks(rq);
-#else
+#endif /* CONFIG_SMP */
 		if (p->prio < rq->curr->prio)
 			resched_curr(rq);
-#endif /* CONFIG_SMP */
 	}
 }
 

[PATCH 4.10 17/17] usb: musb: fix possible spinlock deadlock

[Greg Kroah-Hartman]

4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bin Liu <b-liu@ti.com>

commit bc1e2154542071e3cfe1734b143af9b8bdacf8bd upstream.

The DSPS glue calls del_timer_sync() in its musb_platform_disable()
implementation, which requires the caller to not hold a lock. But
musb_remove() calls musb_platform_disable() will musb->lock held. This
could causes spinlock deadlock.

So change musb_remove() to call musb_platform_disable() without holds
musb->lock. This doesn't impact the musb_platform_disable implementation
in other glue drivers.

root@am335x-evm:~# modprobe -r musb-dsps
[  126.134879] musb-hdrc musb-hdrc.1: remove, state 1
[  126.140465] usb usb2: USB disconnect, device number 1
[  126.146178] usb 2-1: USB disconnect, device number 2
[  126.416985] musb-hdrc musb-hdrc.1: USB bus 2 deregistered
[  126.423943]
[  126.425525] ======================================================
[  126.431997] [ INFO: possible circular locking dependency detected ]
[  126.438564] 4.11.0-rc1-00003-g1557f13bca04-dirty #77 Not tainted
[  126.444852] -------------------------------------------------------
[  126.451414] modprobe/778 is trying to acquire lock:
[  126.456523]  (((&glue->timer))){+.-...}, at: [<c01b8788>] del_timer_sync+0x0/0xd0
[  126.464403]
[  126.464403] but task is already holding lock:
[  126.470511]  (&(&musb->lock)->rlock){-.-...}, at: [<bf30b7f8>] musb_remove+0x50/0x1
30 [musb_hdrc]
[  126.479965]
[  126.479965] which lock already depends on the new lock.
[  126.479965]
[  126.488531]
[  126.488531] the existing dependency chain (in reverse order) is:
[  126.496368]
[  126.496368] -> #1 (&(&musb->lock)->rlock){-.-...}:
[  126.502968]        otg_timer+0x80/0xec [musb_dsps]
[  126.507990]        call_timer_fn+0xb4/0x390
[  126.512372]        expire_timers+0xf0/0x1fc
[  126.516754]        run_timer_softirq+0x80/0x178
[  126.521511]        __do_softirq+0xc4/0x554
[  126.525802]        irq_exit+0xe8/0x158
[  126.529735]        __handle_domain_irq+0x58/0xb8
[  126.534583]        __irq_usr+0x54/0x80
[  126.538507]
[  126.538507] -> #0 (((&glue->timer))){+.-...}:
[  126.544636]        del_timer_sync+0x40/0xd0
[  126.549066]        musb_remove+0x6c/0x130 [musb_hdrc]
[  126.554370]        platform_drv_remove+0x24/0x3c
[  126.559206]        device_release_driver_internal+0x14c/0x1e0
[  126.565225]        bus_remove_device+0xd8/0x108
[  126.569970]        device_del+0x1e4/0x308
[  126.574170]        platform_device_del+0x24/0x8c
[  126.579006]        platform_device_unregister+0xc/0x20
[  126.584394]        dsps_remove+0x14/0x30 [musb_dsps]
[  126.589595]        platform_drv_remove+0x24/0x3c
[  126.594432]        device_release_driver_internal+0x14c/0x1e0
[  126.600450]        driver_detach+0x38/0x6c
[  126.604740]        bus_remove_driver+0x4c/0xa0
[  126.609407]        SyS_delete_module+0x11c/0x1e4
[  126.614252]        __sys_trace_return+0x0/0x10

Fixes: ea2f35c01d5ea ("usb: musb: Fix sleeping function called from invalid context for hdrc glue")
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/musb/musb_core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2497,8 +2497,8 @@ static int musb_remove(struct platform_d
 	pm_runtime_get_sync(musb->controller);
 	musb_host_cleanup(musb);
 	musb_gadget_cleanup(musb);
-	spin_lock_irqsave(&musb->lock, flags);
 	musb_platform_disable(musb);
+	spin_lock_irqsave(&musb->lock, flags);
 	musb_generic_disable(musb);
 	spin_unlock_irqrestore(&musb->lock, flags);
 	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);

Re: [PATCH 4.10 00/17] 4.10.8-stable review

[Shuah Khan]

On 03/30/2017 04:00 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.10.8 release.
> There are 17 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat Apr  1 09:59:07 UTC 2017.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.10.8-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 4.10 00/17] 4.10.8-stable review

[Greg Kroah-Hartman]

On Thu, Mar 30, 2017 at 12:54:54PM -0600, Shuah Khan wrote:
> On 03/30/2017 04:00 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.10.8 release.
> > There are 17 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sat Apr  1 09:59:07 UTC 2017.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.10.8-rc1.gz
> > or in the git tree and branch at:
> >   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.10.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> 
> Compiled and booted on my test system. No dmesg regressions.

Thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 4.10 00/17] 4.10.8-stable review

[Guenter Roeck]

On 03/30/2017 03:00 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.10.8 release.
> There are 17 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat Apr  1 09:59:07 UTC 2017.
> Anything received after that time might be too late.
>

Build results:
	total: 149 pass: 149 fail: 0
Qemu test results:
	total: 122 pass: 122 fail: 0

Details are available at http://kerneltests.org/builders.

Guenter

Re: [PATCH 4.10 00/17] 4.10.8-stable review

[Greg Kroah-Hartman]

On Thu, Mar 30, 2017 at 08:46:15PM -0700, Guenter Roeck wrote:
> On 03/30/2017 03:00 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.10.8 release.
> > There are 17 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sat Apr  1 09:59:07 UTC 2017.
> > Anything received after that time might be too late.
> > 
> 
> Build results:
> 	total: 149 pass: 149 fail: 0
> Qemu test results:
> 	total: 122 pass: 122 fail: 0
> 
> Details are available at http://kerneltests.org/builders.

Thanks for testing all of these and letting me know.

greg k-h