* [RESEND PATCH] ARM: dts: imx6q-utilite-pro: add hpd gpio
@ 2017-04-04 19:41 ` christopher.spinrath at rwth-aachen.de
0 siblings, 0 replies; 6+ messages in thread
From: christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg @ 2017-04-04 19:41 UTC (permalink / raw)
To: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
linux-I+IVW8TIWO2tmTQ+vhA3Yw,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
grinberg-UTxiZqZC01RS1MOuV/RT9w, fabio.estevam-3arQi8VN3Tc,
christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg
From: Christopher Spinrath <christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org>
The hpd pin of the second hdmi connector of the Utilite Pro is wired
up to a gpio pin of the SoC. Reflect this in the device tree.
Signed-off-by: Christopher Spinrath <christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org>
---
Hi Shawn,
this was Patch 2/2 of a mini series [1] I sent four weeks ago. The
drm part (Patch 1/2) has already been merged into drm-next.
Any comments?
Cheers,
Christopher
arch/arm/boot/dts/imx6q-utilite-pro.dts | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts
index 69bdd82..d900ad6 100644
--- a/arch/arm/boot/dts/imx6q-utilite-pro.dts
+++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts
@@ -101,9 +101,11 @@
hdmi-connector {
compatible = "hdmi-connector";
-
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hpd>;
type = "a";
ddc-i2c-bus = <&i2c_dvi_ddc>;
+ hpd-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
port {
hdmi_connector_in: endpoint {
@@ -209,6 +211,12 @@
>;
};
+ pinctrl_hpd: hpdgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [RESEND PATCH] ARM: dts: imx6q-utilite-pro: add hpd gpio
@ 2017-04-04 19:41 ` christopher.spinrath at rwth-aachen.de
0 siblings, 0 replies; 6+ messages in thread
From: christopher.spinrath at rwth-aachen.de @ 2017-04-04 19:41 UTC (permalink / raw)
To: linux-arm-kernel
From: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
The hpd pin of the second hdmi connector of the Utilite Pro is wired
up to a gpio pin of the SoC. Reflect this in the device tree.
Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
---
Hi Shawn,
this was Patch 2/2 of a mini series [1] I sent four weeks ago. The
drm part (Patch 1/2) has already been merged into drm-next.
Any comments?
Cheers,
Christopher
arch/arm/boot/dts/imx6q-utilite-pro.dts | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts
index 69bdd82..d900ad6 100644
--- a/arch/arm/boot/dts/imx6q-utilite-pro.dts
+++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts
@@ -101,9 +101,11 @@
hdmi-connector {
compatible = "hdmi-connector";
-
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hpd>;
type = "a";
ddc-i2c-bus = <&i2c_dvi_ddc>;
+ hpd-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
port {
hdmi_connector_in: endpoint {
@@ -209,6 +211,12 @@
>;
};
+ pinctrl_hpd: hpdgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
--
2.10.2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [RESEND PATCH] ARM: dts: imx6q-utilite-pro: add hpd gpio
2017-04-04 19:41 ` christopher.spinrath at rwth-aachen.de
@ 2017-04-07 12:42 ` Shawn Guo
-1 siblings, 0 replies; 6+ messages in thread
From: Shawn Guo @ 2017-04-07 12:42 UTC (permalink / raw)
To: christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg
Cc: kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
grinberg-UTxiZqZC01RS1MOuV/RT9w, fabio.estevam-3arQi8VN3Tc
On Tue, Apr 04, 2017 at 09:41:30PM +0200, christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org wrote:
> From: Christopher Spinrath <christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org>
>
> The hpd pin of the second hdmi connector of the Utilite Pro is wired
> up to a gpio pin of the SoC. Reflect this in the device tree.
>
> Signed-off-by: Christopher Spinrath <christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org>
Applied, thanks.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* [RESEND PATCH] ARM: dts: imx6q-utilite-pro: add hpd gpio
@ 2017-04-07 12:42 ` Shawn Guo
0 siblings, 0 replies; 6+ messages in thread
From: Shawn Guo @ 2017-04-07 12:42 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Apr 04, 2017 at 09:41:30PM +0200, christopher.spinrath at rwth-aachen.de wrote:
> From: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
>
> The hpd pin of the second hdmi connector of the Utilite Pro is wired
> up to a gpio pin of the SoC. Reflect this in the device tree.
>
> Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Applied, thanks.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [RESEND PATCH] ARM: dts: imx6q-utilite-pro: add hpd gpio
[not found] <68f4fe14a312455cbb4165d215277359@rwthex-s1-b.rwth-ad.de>
@ 2017-04-04 19:42 ` Christopher Spinrath
0 siblings, 0 replies; 6+ messages in thread
From: Christopher Spinrath @ 2017-04-04 19:42 UTC (permalink / raw)
To: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
linux-I+IVW8TIWO2tmTQ+vhA3Yw,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
grinberg-UTxiZqZC01RS1MOuV/RT9w, fabio.estevam-3arQi8VN3Tc,
christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg
On 04/04/2017 09:41 PM, christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org wrote:
> From: Christopher Spinrath <christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org>
>
> The hpd pin of the second hdmi connector of the Utilite Pro is wired
> up to a gpio pin of the SoC. Reflect this in the device tree.
>
> Signed-off-by: Christopher Spinrath <christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org>
> ---
>
> Hi Shawn,
>
> this was Patch 2/2 of a mini series [1] I sent four weeks ago. The
> drm part (Patch 1/2) has already been merged into drm-next.
>
> Any comments?
>
> Cheers,
> Christopher
Sorry, I forgot the link:
[1]
http://lists.infradead.org/pipermail/linux-arm-kernel/2017-March/491829.html
>
> arch/arm/boot/dts/imx6q-utilite-pro.dts | 10 +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts
> index 69bdd82..d900ad6 100644
> --- a/arch/arm/boot/dts/imx6q-utilite-pro.dts
> +++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts
> @@ -101,9 +101,11 @@
>
> hdmi-connector {
> compatible = "hdmi-connector";
> -
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hpd>;
> type = "a";
> ddc-i2c-bus = <&i2c_dvi_ddc>;
> + hpd-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
>
> port {
> hdmi_connector_in: endpoint {
> @@ -209,6 +211,12 @@
> >;
> };
>
> + pinctrl_hpd: hpdgrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
> + >;
> + };
> +
> pinctrl_i2c1: i2c1grp {
> fsl,pins = <
> MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* [RESEND PATCH] ARM: dts: imx6q-utilite-pro: add hpd gpio
@ 2017-04-04 19:42 ` Christopher Spinrath
0 siblings, 0 replies; 6+ messages in thread
From: Christopher Spinrath @ 2017-04-04 19:42 UTC (permalink / raw)
To: linux-arm-kernel
On 04/04/2017 09:41 PM, christopher.spinrath at rwth-aachen.de wrote:
> From: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
>
> The hpd pin of the second hdmi connector of the Utilite Pro is wired
> up to a gpio pin of the SoC. Reflect this in the device tree.
>
> Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
> ---
>
> Hi Shawn,
>
> this was Patch 2/2 of a mini series [1] I sent four weeks ago. The
> drm part (Patch 1/2) has already been merged into drm-next.
>
> Any comments?
>
> Cheers,
> Christopher
Sorry, I forgot the link:
[1]
http://lists.infradead.org/pipermail/linux-arm-kernel/2017-March/491829.html
>
> arch/arm/boot/dts/imx6q-utilite-pro.dts | 10 +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts
> index 69bdd82..d900ad6 100644
> --- a/arch/arm/boot/dts/imx6q-utilite-pro.dts
> +++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts
> @@ -101,9 +101,11 @@
>
> hdmi-connector {
> compatible = "hdmi-connector";
> -
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hpd>;
> type = "a";
> ddc-i2c-bus = <&i2c_dvi_ddc>;
> + hpd-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
>
> port {
> hdmi_connector_in: endpoint {
> @@ -209,6 +211,12 @@
> >;
> };
>
> + pinctrl_hpd: hpdgrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
> + >;
> + };
> +
> pinctrl_i2c1: i2c1grp {
> fsl,pins = <
> MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-04-07 12:42 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-04-04 19:41 [RESEND PATCH] ARM: dts: imx6q-utilite-pro: add hpd gpio christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg
2017-04-04 19:41 ` christopher.spinrath at rwth-aachen.de
[not found] ` <95646809a50c48f4939b4da547f3a6f3-gtPewvpZjL8umhiu9RXYRl5UTUQ924AY@public.gmane.org>
2017-04-07 12:42 ` Shawn Guo
2017-04-07 12:42 ` Shawn Guo
[not found] <68f4fe14a312455cbb4165d215277359@rwthex-s1-b.rwth-ad.de>
[not found] ` <68f4fe14a312455cbb4165d215277359-gtPewvpZjL8umhiu9RXYRl5UTUQ924AY@public.gmane.org>
2017-04-04 19:42 ` Christopher Spinrath
2017-04-04 19:42 ` Christopher Spinrath
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.