[PATCH v2 0/2] arm64: gen3: enable eMMC HS200 in DT

[PATCH v2 0/2] arm64: gen3: enable eMMC HS200 in DT

[Wolfram Sang]

Simon,

the driver patches for HS200 support are now upstream. So, based on the earlier
discussion [1] it should be now safe to pick up the DTS patches. I rebased them
to the arm64-dt-for-v4.12 branch.

Thanks,

   Wolfram

[1] http://www.spinics.net/lists/linux-renesas-soc/msg11230.html

Wolfram Sang (2):
  arm64: dts: r8a7795: enable HS200 for eMMC
  arm64: dts: r8a7796: enable HS200 for eMMC

 arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 1 +
 arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 1 +
 2 files changed, 2 insertions(+)

-- 
2.11.0

[PATCH v2 1/2] arm64: dts: r8a7795: enable HS200 for eMMC

[Wolfram Sang]

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 639aa085d99666..594bd6a1386499 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -467,6 +467,7 @@
 	vmmc-supply = <&reg_3p3v>;
 	vqmmc-supply = <&reg_1p8v>;
 	bus-width = <8>;
+	mmc-hs200-1_8v;
 	non-removable;
 	status = "okay";
 };
-- 
2.11.0

[PATCH v2 2/2] arm64: dts: r8a7796: enable HS200 for eMMC

[Wolfram Sang]

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
index c9f59b6ce33f69..7f0ac6a9d49b8d 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
@@ -216,6 +216,7 @@
 	vmmc-supply = <&reg_3p3v>;
 	vqmmc-supply = <&reg_1p8v>;
 	bus-width = <8>;
+	mmc-hs200-1_8v;
 	non-removable;
 	status = "okay";
 };
-- 
2.11.0

Re: [PATCH v2 0/2] arm64: gen3: enable eMMC HS200 in DT

[Simon Horman]

On Sat, Apr 08, 2017 at 01:27:57PM +0200, Wolfram Sang wrote:
> Simon,
> 
> the driver patches for HS200 support are now upstream. So, based on the
> earlier discussion [1] it should be now safe to pick up the DTS patches.
> I rebased them to the arm64-dt-for-v4.12 branch.

Thanks, I have queued these up.