* how to enable more than 1 spatial stream in Rx STBC
@ 2017-04-10 5:35 KAVITA MATHUR
2017-04-10 10:35 ` KAVITA MATHUR
0 siblings, 1 reply; 2+ messages in thread
From: KAVITA MATHUR @ 2017-04-10 5:35 UTC (permalink / raw)
To: ath10k, ath9k-devel
Hi,
There is always single Rx spatial stream set even multiple streams are configured from
hostapd configuration file.
I am using ath10k driver for chipset QCA9880 (WLM900VX) from backport-4.4.2-1.
Do I need to apply any patch?
Please help me to test multiple spatial streams.
Thanks & Regards,
कविता माथुर Kavita Mathur
वरिष्ठ अनुसंधान अभियंता Senior Research Engineer
सी-डॉट C-DOT
इलैक्ट्रॉनिक्स सिटी फेज़ I Electronics City Phase I
होसूर रोड, बेंगलूरु Hosur Road, Bengaluru – 560100
फोन Ph 080-28529896
Disclaimer:
----------
This email and any files transmitted with it
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: how to enable more than 1 spatial stream in Rx STBC
2017-04-10 5:35 how to enable more than 1 spatial stream in Rx STBC KAVITA MATHUR
@ 2017-04-10 10:35 ` KAVITA MATHUR
0 siblings, 0 replies; 2+ messages in thread
From: KAVITA MATHUR @ 2017-04-10 10:35 UTC (permalink / raw)
To: KAVITA MATHUR, ath10k, ath9k-devel
when I set ht_capab=[HT40+][RX-STBC12] in hostapd.conf, following error log will come:
wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Driver does not support configured HT capability [RX-STBC*]
wlan0: interface state COUNTRY_UPDATE->DISABLED
wlan0: AP-DISABLED
wlan0: Unable to setup interface.
wlan0: interface state DISABLED->DISABLED
wlan0: AP-DISABLED
hostapd_free_hapd_data: Interface wlan0 wasn't started
nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Thanks & Regards,
Kavita
On Mon, 10 Apr 2017 11:05:11 +0530, KAVITA MATHUR wrote
> Hi,
>
> There is always single Rx spatial stream set even multiple streams are
> configured from hostapd configuration file.
>
> I am using ath10k driver for chipset QCA9880 (WLM900VX) from backport-4.4.2-1.
>
> Do I need to apply any patch?
>
> Please help me to test multiple spatial streams.
>
> Thanks & Regards,
> कविता माथुर Kavita Mathur
> वरिष्ठ अनुसंधान अभियंता Senior
> Research Engineer सी-डॉट C-DOT
> इलैक्ट्रॉनिक्स सिटी फेज़ I
> Electronics City Phase I होसूर रोड, बेंगलूरु
> Hosur Road, Bengaluru – 560100 फोन Ph 080-28529896 Disclaimer:
> ----------
> This email and any files transmitted with it
>
> _______________________________________________
> ath10k mailing list
> ath10k@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k
Thanks & Regards,
कविता माथुर Kavita Mathur
वरिष्ठ अनुसंधान अभियंता Senior Research Engineer
सी-डॉट C-DOT
इलैक्ट्रॉनिक्स सिटी फेज़ I Electronics City Phase I
होसूर रोड, बेंगलूरु Hosur Road, Bengaluru – 560100
फोन Ph 080-28529896
Disclaimer:
----------
This email and any files transmitted with it
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-04-10 10:42 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-04-10 5:35 how to enable more than 1 spatial stream in Rx STBC KAVITA MATHUR
2017-04-10 10:35 ` KAVITA MATHUR
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.