* [PATCH] arm64: dts: allwinner: a64: Add UART2 pin nodes
@ 2017-04-18 5:34 ` Maxime Ripard
0 siblings, 0 replies; 12+ messages in thread
From: Maxime Ripard @ 2017-04-18 5:34 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Apr 14, 2017 at 07:13:20PM +0200, Andreas F?rber wrote:
> UART2 is exposed on the Pi connector of Pine64. Make a pinctrl node
> available at the SoC level, to simplify enabling UART2 via DT overlay.
>
> Signed-off-by: Andreas F?rber <afaerber@suse.de>
Applied, thanks!
Could you also create the node in the pine64 DTS (with an explicit
status = "disabled" in there) so that the overlay would be even easier
to make ?
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170418/ffcc2c87/attachment.sig>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] arm64: dts: allwinner: a64: Add UART2 pin nodes
@ 2017-04-18 5:34 ` Maxime Ripard
0 siblings, 0 replies; 12+ messages in thread
From: Maxime Ripard @ 2017-04-18 5:34 UTC (permalink / raw)
To: Andreas Färber
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Chen-Yu Tsai,
Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: Type: text/plain, Size: 583 bytes --]
On Fri, Apr 14, 2017 at 07:13:20PM +0200, Andreas Färber wrote:
> UART2 is exposed on the Pi connector of Pine64. Make a pinctrl node
> available at the SoC level, to simplify enabling UART2 via DT overlay.
>
> Signed-off-by: Andreas Färber <afaerber-l3A5Bk7waGM@public.gmane.org>
Applied, thanks!
Could you also create the node in the pine64 DTS (with an explicit
status = "disabled" in there) so that the overlay would be even easier
to make ?
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH] arm64: dts: allwinner: pine64: Prepare optional UART nodes with pinctrl
2017-04-18 5:34 ` Maxime Ripard
@ 2017-04-18 19:25 ` Andreas Färber
-1 siblings, 0 replies; 12+ messages in thread
From: Andreas Färber @ 2017-04-18 19:25 UTC (permalink / raw)
To: Maxime Ripard
Cc: Andreas Färber, Chen-Yu Tsai, Rob Herring, Mark Rutland,
Catalin Marinas, Will Deacon, linux-arm-kernel, devicetree,
linux-kernel
Pine64 exposes all A64 UARTs, not just UART0.
Since the pins can be used as GPIO, don't enable the new UART nodes by
default, but prepare the pinctrl settings to aid in activating them via
overlays, i.e., overriding the status property of &uartX nodes.
For UART4 (Euler) the safer route of not including RTS/CTS pins is chosen,
whereas for UART1 (Bluetooth) they are included.
Add the corresponding pinctrl nodes where missing.
Suggested-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
.../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 29 ++++++++++++++++++++++
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 15 +++++++++++
2 files changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index db6c0f36999e..260fb12ac3fc 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -99,12 +99,41 @@
status = "okay";
};
+/* On Exp and Euler connectors */
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
+/* On Wifi/BT connector, with RTS/CTS */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ status = "disabled";
+};
+
+/* On Pi-2 connector */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "disabled";
+};
+
+/* On Euler connector */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ status = "disabled";
+};
+
+/* On Euler connector, RTS/CTS optional */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+ status = "disabled";
+};
+
&usb_otg {
dr_mode = "host";
status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 133810df06b9..c172c62447e8 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -292,6 +292,21 @@
pins = "PB0", "PB1";
function = "uart2";
};
+
+ uart3_pins: uart3-pins {
+ pins = "PD0", "PD1";
+ function = "uart3";
+ };
+
+ uart4_pins: uart4-pins {
+ pins = "PD2", "PD3";
+ function = "uart4";
+ };
+
+ uart4_rts_cts_pins: uart4-rts-cts-pins {
+ pins = "PD4", "PD5";
+ function = "uart4";
+ };
};
uart0: serial@1c28000 {
--
2.10.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH] arm64: dts: allwinner: pine64: Prepare optional UART nodes with pinctrl
@ 2017-04-18 19:25 ` Andreas Färber
0 siblings, 0 replies; 12+ messages in thread
From: Andreas Färber @ 2017-04-18 19:25 UTC (permalink / raw)
To: linux-arm-kernel
Pine64 exposes all A64 UARTs, not just UART0.
Since the pins can be used as GPIO, don't enable the new UART nodes by
default, but prepare the pinctrl settings to aid in activating them via
overlays, i.e., overriding the status property of &uartX nodes.
For UART4 (Euler) the safer route of not including RTS/CTS pins is chosen,
whereas for UART1 (Bluetooth) they are included.
Add the corresponding pinctrl nodes where missing.
Suggested-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Andreas F?rber <afaerber@suse.de>
---
.../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 29 ++++++++++++++++++++++
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 15 +++++++++++
2 files changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index db6c0f36999e..260fb12ac3fc 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -99,12 +99,41 @@
status = "okay";
};
+/* On Exp and Euler connectors */
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
+/* On Wifi/BT connector, with RTS/CTS */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ status = "disabled";
+};
+
+/* On Pi-2 connector */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "disabled";
+};
+
+/* On Euler connector */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ status = "disabled";
+};
+
+/* On Euler connector, RTS/CTS optional */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+ status = "disabled";
+};
+
&usb_otg {
dr_mode = "host";
status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 133810df06b9..c172c62447e8 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -292,6 +292,21 @@
pins = "PB0", "PB1";
function = "uart2";
};
+
+ uart3_pins: uart3-pins {
+ pins = "PD0", "PD1";
+ function = "uart3";
+ };
+
+ uart4_pins: uart4-pins {
+ pins = "PD2", "PD3";
+ function = "uart4";
+ };
+
+ uart4_rts_cts_pins: uart4-rts-cts-pins {
+ pins = "PD4", "PD5";
+ function = "uart4";
+ };
};
uart0: serial at 1c28000 {
--
2.10.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH] arm64: dts: allwinner: pine64: Prepare optional UART nodes with pinctrl
2017-04-18 19:25 ` Andreas Färber
@ 2017-04-19 14:52 ` Maxime Ripard
-1 siblings, 0 replies; 12+ messages in thread
From: Maxime Ripard @ 2017-04-19 14:52 UTC (permalink / raw)
To: Andreas Färber
Cc: Chen-Yu Tsai, Rob Herring, Mark Rutland, Catalin Marinas,
Will Deacon, linux-arm-kernel, devicetree, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 780 bytes --]
On Tue, Apr 18, 2017 at 09:25:38PM +0200, Andreas Färber wrote:
> Pine64 exposes all A64 UARTs, not just UART0.
>
> Since the pins can be used as GPIO, don't enable the new UART nodes by
> default, but prepare the pinctrl settings to aid in activating them via
> overlays, i.e., overriding the status property of &uartX nodes.
>
> For UART4 (Euler) the safer route of not including RTS/CTS pins is chosen,
> whereas for UART1 (Bluetooth) they are included.
>
> Add the corresponding pinctrl nodes where missing.
>
> Suggested-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
Applied, thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH] arm64: dts: allwinner: pine64: Prepare optional UART nodes with pinctrl
@ 2017-04-19 14:52 ` Maxime Ripard
0 siblings, 0 replies; 12+ messages in thread
From: Maxime Ripard @ 2017-04-19 14:52 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Apr 18, 2017 at 09:25:38PM +0200, Andreas F?rber wrote:
> Pine64 exposes all A64 UARTs, not just UART0.
>
> Since the pins can be used as GPIO, don't enable the new UART nodes by
> default, but prepare the pinctrl settings to aid in activating them via
> overlays, i.e., overriding the status property of &uartX nodes.
>
> For UART4 (Euler) the safer route of not including RTS/CTS pins is chosen,
> whereas for UART1 (Bluetooth) they are included.
>
> Add the corresponding pinctrl nodes where missing.
>
> Suggested-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> Signed-off-by: Andreas F?rber <afaerber@suse.de>
Applied, thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170419/9463c8d7/attachment.sig>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] arm64: dts: allwinner: a64: Add UART2 pin nodes
2017-04-18 5:34 ` Maxime Ripard
(?)
@ 2017-04-18 19:32 ` Andreas Färber
-1 siblings, 0 replies; 12+ messages in thread
From: Andreas Färber @ 2017-04-18 19:32 UTC (permalink / raw)
To: Maxime Ripard
Cc: linux-arm-kernel, Chen-Yu Tsai, Rob Herring, Mark Rutland,
Catalin Marinas, Will Deacon, devicetree, linux-kernel
Am 18.04.2017 um 07:34 schrieb Maxime Ripard:
> On Fri, Apr 14, 2017 at 07:13:20PM +0200, Andreas Färber wrote:
>> UART2 is exposed on the Pi connector of Pine64. Make a pinctrl node
>> available at the SoC level, to simplify enabling UART2 via DT overlay.
>>
>> Signed-off-by: Andreas Färber <afaerber@suse.de>
>
> Applied, thanks!
Thanks, that was fast.
> Could you also create the node in the pine64 DTS (with an explicit
> status = "disabled" in there) so that the overlay would be even easier
> to make ?
Makes sense. I went ahead and did it for all UART nodes then - careful,
final patch is neither build- nor runtime-tested yet.
Cheers,
Andreas
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH] arm64: dts: allwinner: a64: Add UART2 pin nodes
@ 2017-04-18 19:32 ` Andreas Färber
0 siblings, 0 replies; 12+ messages in thread
From: Andreas Färber @ 2017-04-18 19:32 UTC (permalink / raw)
To: linux-arm-kernel
Am 18.04.2017 um 07:34 schrieb Maxime Ripard:
> On Fri, Apr 14, 2017 at 07:13:20PM +0200, Andreas F?rber wrote:
>> UART2 is exposed on the Pi connector of Pine64. Make a pinctrl node
>> available at the SoC level, to simplify enabling UART2 via DT overlay.
>>
>> Signed-off-by: Andreas F?rber <afaerber@suse.de>
>
> Applied, thanks!
Thanks, that was fast.
> Could you also create the node in the pine64 DTS (with an explicit
> status = "disabled" in there) so that the overlay would be even easier
> to make ?
Makes sense. I went ahead and did it for all UART nodes then - careful,
final patch is neither build- nor runtime-tested yet.
Cheers,
Andreas
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Felix Imend?rffer, Jane Smithard, Graham Norton
HRB 21284 (AG N?rnberg)
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] arm64: dts: allwinner: a64: Add UART2 pin nodes
@ 2017-04-18 19:32 ` Andreas Färber
0 siblings, 0 replies; 12+ messages in thread
From: Andreas Färber @ 2017-04-18 19:32 UTC (permalink / raw)
To: Maxime Ripard
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Chen-Yu Tsai,
Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Am 18.04.2017 um 07:34 schrieb Maxime Ripard:
> On Fri, Apr 14, 2017 at 07:13:20PM +0200, Andreas Färber wrote:
>> UART2 is exposed on the Pi connector of Pine64. Make a pinctrl node
>> available at the SoC level, to simplify enabling UART2 via DT overlay.
>>
>> Signed-off-by: Andreas Färber <afaerber-l3A5Bk7waGM@public.gmane.org>
>
> Applied, thanks!
Thanks, that was fast.
> Could you also create the node in the pine64 DTS (with an explicit
> status = "disabled" in there) so that the overlay would be even easier
> to make ?
Makes sense. I went ahead and did it for all UART nodes then - careful,
final patch is neither build- nor runtime-tested yet.
Cheers,
Andreas
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 12+ messages in thread