* [U-Boot] [PATCH] sun7i: Add support for Olimex A20-OLinuXino-LIME2-eMMC
@ 2017-05-03 12:18 Olliver Schinagl
2017-05-03 12:57 ` Jagan Teki
2017-05-03 16:50 ` Jagan Teki
0 siblings, 2 replies; 4+ messages in thread
From: Olliver Schinagl @ 2017-05-03 12:18 UTC (permalink / raw)
To: u-boot
This patch adds support for the Olimex OLinuXino Lime2 with eMMC flash
storage.
https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME2-eMMC/
It is a assembly variant of the regular Lime2 but featuring eMMC for
storage.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
---
Note: for the board to work properly, the updated eMMC dts variant needs to
be updated from upstream.
board/sunxi/MAINTAINERS | 5 +++++
configs/A20-OLinuXino-Lime2-eMMC_defconfig | 33 ++++++++++++++++++++++++++++++
2 files changed, 38 insertions(+)
create mode 100644 configs/A20-OLinuXino-Lime2-eMMC_defconfig
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 2321b8b08f..84f91fd10b 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -89,6 +89,11 @@ M: Iain Paton <ipaton0@gmail.com>
S: Maintained
F: configs/A20-OLinuXino-Lime2_defconfig
+A20-OLINUXINO-LIME2-EMMC BOARD
+M: Olliver Schinagl <oliver@schinagl.nl>
+S: Maintained
+F: configs/A20-OLinuXino-Lime2-eMMC_defconfig
+
A33-OLINUXINO BOARD
M: Stefan Mavrodiev <stefan.mavrodiev@gmail.com>
S: Maintained
diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
new file mode 100644
index 0000000000..1369d2d90b
--- /dev/null
+++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
@@ -0,0 +1,33 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN7I=y
+CONFIG_DRAM_CLK=384
+CONFIG_MMC0_CD_PIN="PH1"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_USB0_VBUS_PIN="PC17"
+CONFIG_USB0_VBUS_DET="PH5"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2-emmc"
+CONFIG_AHCI=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,SATAPWR=SUNXI_GPC(3)"
+CONFIG_SPL=y
+CONFIG_SPL_I2C_SUPPORT=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_DFU=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_PARTITION_UUIDS is not set
+CONFIG_DFU_RAM=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_AXP_ALDO3_VOLT=2800
+CONFIG_AXP_ALDO4_VOLT=2800
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Allwinner Technology"
+CONFIG_G_DNL_VENDOR_NUM=0x1f3a
+CONFIG_G_DNL_PRODUCT_NUM=0x1010
--
2.11.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH] sun7i: Add support for Olimex A20-OLinuXino-LIME2-eMMC
2017-05-03 12:18 [U-Boot] [PATCH] sun7i: Add support for Olimex A20-OLinuXino-LIME2-eMMC Olliver Schinagl
@ 2017-05-03 12:57 ` Jagan Teki
2017-05-03 16:50 ` Jagan Teki
1 sibling, 0 replies; 4+ messages in thread
From: Jagan Teki @ 2017-05-03 12:57 UTC (permalink / raw)
To: u-boot
On Wed, May 3, 2017 at 5:48 PM, Olliver Schinagl <oliver@schinagl.nl> wrote:
> This patch adds support for the Olimex OLinuXino Lime2 with eMMC flash
> storage.
> https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME2-eMMC/
>
> It is a assembly variant of the regular Lime2 but featuring eMMC for
> storage.
>
> Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
> ---
>
> Note: for the board to work properly, the updated eMMC dts variant needs to
> be updated from upstream.
>
> board/sunxi/MAINTAINERS | 5 +++++
> configs/A20-OLinuXino-Lime2-eMMC_defconfig | 33 ++++++++++++++++++++++++++++++
> 2 files changed, 38 insertions(+)
> create mode 100644 configs/A20-OLinuXino-Lime2-eMMC_defconfig
>
> diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
> index 2321b8b08f..84f91fd10b 100644
> --- a/board/sunxi/MAINTAINERS
> +++ b/board/sunxi/MAINTAINERS
> @@ -89,6 +89,11 @@ M: Iain Paton <ipaton0@gmail.com>
> S: Maintained
> F: configs/A20-OLinuXino-Lime2_defconfig
>
> +A20-OLINUXINO-LIME2-EMMC BOARD
> +M: Olliver Schinagl <oliver@schinagl.nl>
> +S: Maintained
> +F: configs/A20-OLinuXino-Lime2-eMMC_defconfig
> +
> A33-OLINUXINO BOARD
> M: Stefan Mavrodiev <stefan.mavrodiev@gmail.com>
> S: Maintained
> diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
> new file mode 100644
> index 0000000000..1369d2d90b
> --- /dev/null
> +++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
> @@ -0,0 +1,33 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_MACH_SUN7I=y
> +CONFIG_DRAM_CLK=384
> +CONFIG_MMC0_CD_PIN="PH1"
> +CONFIG_MMC_SUNXI_SLOT_EXTRA=2
> +CONFIG_USB0_VBUS_PIN="PC17"
> +CONFIG_USB0_VBUS_DET="PH5"
> +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2-emmc"
> +CONFIG_AHCI=y
> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> +CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,SATAPWR=SUNXI_GPC(3)"
> +CONFIG_SPL=y
These were moved to Kconfig, please sync with latest.
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH] sun7i: Add support for Olimex A20-OLinuXino-LIME2-eMMC
2017-05-03 12:18 [U-Boot] [PATCH] sun7i: Add support for Olimex A20-OLinuXino-LIME2-eMMC Olliver Schinagl
2017-05-03 12:57 ` Jagan Teki
@ 2017-05-03 16:50 ` Jagan Teki
2017-05-03 16:52 ` [U-Boot] [linux-sunxi] " Icenowy Zheng
1 sibling, 1 reply; 4+ messages in thread
From: Jagan Teki @ 2017-05-03 16:50 UTC (permalink / raw)
To: u-boot
On Wednesday 03 May 2017 05:48 PM, Olliver Schinagl wrote:
> This patch adds support for the Olimex OLinuXino Lime2 with eMMC flash
> storage.
> https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME2-eMMC/
>
> It is a assembly variant of the regular Lime2 but featuring eMMC for
> storage.
>
> Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
> ---
>
> Note: for the board to work properly, the updated eMMC dts variant needs to
> be updated from upstream.
>
> board/sunxi/MAINTAINERS | 5 +++++
> configs/A20-OLinuXino-Lime2-eMMC_defconfig | 33 ++++++++++++++++++++++++++++++
> 2 files changed, 38 insertions(+)
> create mode 100644 configs/A20-OLinuXino-Lime2-eMMC_defconfig
>
> diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
> index 2321b8b08f..84f91fd10b 100644
> --- a/board/sunxi/MAINTAINERS
> +++ b/board/sunxi/MAINTAINERS
> @@ -89,6 +89,11 @@ M: Iain Paton <ipaton0@gmail.com>
> S: Maintained
> F: configs/A20-OLinuXino-Lime2_defconfig
>
> +A20-OLINUXINO-LIME2-EMMC BOARD
> +M: Olliver Schinagl <oliver@schinagl.nl>
> +S: Maintained
> +F: configs/A20-OLinuXino-Lime2-eMMC_defconfig
> +
> A33-OLINUXINO BOARD
> M: Stefan Mavrodiev <stefan.mavrodiev@gmail.com>
> S: Maintained
> diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
I guess you used the latest, right? I got the below error with 4.7.1 and
even buildman does.
arm-linux-gnueabi-ld.bfd: u-boot-spl section `.u_boot_list' will not fit
in region `.sram'
arm-linux-gnueabi-ld.bfd: region `.sram' overflowed by 88 bytes
arm-linux-gnueabi-ld.bfd: u-boot-spl: Not enough room for program
headers, try linking with -N
arm-linux-gnueabi-ld.bfd: final link failed: Bad value
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] [linux-sunxi] Re: [PATCH] sun7i: Add support for Olimex A20-OLinuXino-LIME2-eMMC
2017-05-03 16:50 ` Jagan Teki
@ 2017-05-03 16:52 ` Icenowy Zheng
0 siblings, 0 replies; 4+ messages in thread
From: Icenowy Zheng @ 2017-05-03 16:52 UTC (permalink / raw)
To: u-boot
于 2017年5月4日 GMT+08:00 上午12:50:52, Jagan Teki <jagan@openedev.com> 写到:
>On Wednesday 03 May 2017 05:48 PM, Olliver Schinagl wrote:
>> This patch adds support for the Olimex OLinuXino Lime2 with eMMC
>flash
>> storage.
>>
>https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME2-eMMC/
>>
>> It is a assembly variant of the regular Lime2 but featuring eMMC for
>> storage.
>>
>> Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
>> ---
>>
>> Note: for the board to work properly, the updated eMMC dts variant
>needs to
>> be updated from upstream.
>>
>> board/sunxi/MAINTAINERS | 5 +++++
>> configs/A20-OLinuXino-Lime2-eMMC_defconfig | 33
>++++++++++++++++++++++++++++++
>> 2 files changed, 38 insertions(+)
>> create mode 100644 configs/A20-OLinuXino-Lime2-eMMC_defconfig
>>
>> diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
>> index 2321b8b08f..84f91fd10b 100644
>> --- a/board/sunxi/MAINTAINERS
>> +++ b/board/sunxi/MAINTAINERS
>> @@ -89,6 +89,11 @@ M: Iain Paton <ipaton0@gmail.com>
>> S: Maintained
>> F: configs/A20-OLinuXino-Lime2_defconfig
>>
>> +A20-OLINUXINO-LIME2-EMMC BOARD
>> +M: Olliver Schinagl <oliver@schinagl.nl>
>> +S: Maintained
>> +F: configs/A20-OLinuXino-Lime2-eMMC_defconfig
>> +
>> A33-OLINUXINO BOARD
>> M: Stefan Mavrodiev <stefan.mavrodiev@gmail.com>
>> S: Maintained
>> diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig
>b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
>
>I guess you used the latest, right? I got the below error with 4.7.1
>and
>even buildman does.
>
>arm-linux-gnueabi-ld.bfd: u-boot-spl section `.u_boot_list' will not
>fit
>in region `.sram'
>arm-linux-gnueabi-ld.bfd: region `.sram' overflowed by 88 bytes
>arm-linux-gnueabi-ld.bfd: u-boot-spl: Not enough room for program
>headers, try linking with -N
>arm-linux-gnueabi-ld.bfd: final link failed: Bad value
Try a newer GCC?
>
>thanks!
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-05-03 16:52 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-05-03 12:18 [U-Boot] [PATCH] sun7i: Add support for Olimex A20-OLinuXino-LIME2-eMMC Olliver Schinagl
2017-05-03 12:57 ` Jagan Teki
2017-05-03 16:50 ` Jagan Teki
2017-05-03 16:52 ` [U-Boot] [linux-sunxi] " Icenowy Zheng
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.