All of lore.kernel.org
 help / color / mirror / Atom feed
From: Icenowy Zheng <icenowy@aosc.io>
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
	Rob Herring <robh+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>
Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-sunxi@googlegroups.com, Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH v6 11/13] ARM: dts: sun8i: add DE2 nodes for V3s SoC
Date: Thu,  4 May 2017 19:48:56 +0800	[thread overview]
Message-ID: <20170504114858.9008-12-icenowy@aosc.io> (raw)
In-Reply-To: <20170504114858.9008-1-icenowy@aosc.io>

Allwinner V3s SoC features a "Display Engine 2.0" with only one TCON
which have RGB LCD output.

Add device nodes for it as well as the TCON.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
 arch/arm/boot/dts/sun8i-v3s.dtsi | 87 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index 71075969e5e6..0a895179d8ae 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -41,6 +41,10 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun8i-v3s-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-v3s-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
 
 / {
 	#address-cells = <1>;
@@ -59,6 +63,12 @@
 		};
 	};
 
+	de: display-engine {
+		compatible = "allwinner,sun8i-v3s-display-engine";
+		allwinner,pipelines = <&de2_mixer0>;
+		status = "disabled";
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -93,6 +103,83 @@
 		#size-cells = <1>;
 		ranges;
 
+		de2_clocks: clock@1000000 {
+			compatible = "allwinner,sun50i-h5-de2-clk";
+			reg = <0x01000000 0x100000>;
+			clocks = <&ccu CLK_DE>,
+				 <&ccu CLK_BUS_DE>;
+			clock-names = "mod",
+				      "bus";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		de2_mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-v3s-de2-mixer";
+			reg = <0x01100000 0x100000>;
+			clocks = <&de2_clocks CLK_MIXER0>,
+				 <&de2_clocks CLK_BUS_MIXER0>;
+			clock-names = "mod",
+				      "bus";
+			resets = <&de2_clocks RST_MIXER0>;
+			assigned-clocks = <&de2_clocks CLK_MIXER0>;
+			assigned-clock-rates = <150000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-v3s-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>,
+				 <&ccu CLK_TCON0>;
+			clock-names = "ahb",
+				      "tcon-ch0";
+			clock-output-names = "tcon-pixel-clock";
+			resets = <&ccu RST_BUS_TCON0>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
+
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
-- 
2.12.2

WARNING: multiple messages have this Message-ID (diff)
From: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
To: Maxime Ripard
	<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
Cc: linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
Subject: [PATCH v6 11/13] ARM: dts: sun8i: add DE2 nodes for V3s SoC
Date: Thu,  4 May 2017 19:48:56 +0800	[thread overview]
Message-ID: <20170504114858.9008-12-icenowy@aosc.io> (raw)
In-Reply-To: <20170504114858.9008-1-icenowy-h8G6r0blFSE@public.gmane.org>

Allwinner V3s SoC features a "Display Engine 2.0" with only one TCON
which have RGB LCD output.

Add device nodes for it as well as the TCON.

Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
---
 arch/arm/boot/dts/sun8i-v3s.dtsi | 87 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index 71075969e5e6..0a895179d8ae 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -41,6 +41,10 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun8i-v3s-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-v3s-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
 
 / {
 	#address-cells = <1>;
@@ -59,6 +63,12 @@
 		};
 	};
 
+	de: display-engine {
+		compatible = "allwinner,sun8i-v3s-display-engine";
+		allwinner,pipelines = <&de2_mixer0>;
+		status = "disabled";
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -93,6 +103,83 @@
 		#size-cells = <1>;
 		ranges;
 
+		de2_clocks: clock@1000000 {
+			compatible = "allwinner,sun50i-h5-de2-clk";
+			reg = <0x01000000 0x100000>;
+			clocks = <&ccu CLK_DE>,
+				 <&ccu CLK_BUS_DE>;
+			clock-names = "mod",
+				      "bus";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		de2_mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-v3s-de2-mixer";
+			reg = <0x01100000 0x100000>;
+			clocks = <&de2_clocks CLK_MIXER0>,
+				 <&de2_clocks CLK_BUS_MIXER0>;
+			clock-names = "mod",
+				      "bus";
+			resets = <&de2_clocks RST_MIXER0>;
+			assigned-clocks = <&de2_clocks CLK_MIXER0>;
+			assigned-clock-rates = <150000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-v3s-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>,
+				 <&ccu CLK_TCON0>;
+			clock-names = "ahb",
+				      "tcon-ch0";
+			clock-output-names = "tcon-pixel-clock";
+			resets = <&ccu RST_BUS_TCON0>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
+
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
-- 
2.12.2

WARNING: multiple messages have this Message-ID (diff)
From: icenowy@aosc.io (Icenowy Zheng)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 11/13] ARM: dts: sun8i: add DE2 nodes for V3s SoC
Date: Thu,  4 May 2017 19:48:56 +0800	[thread overview]
Message-ID: <20170504114858.9008-12-icenowy@aosc.io> (raw)
In-Reply-To: <20170504114858.9008-1-icenowy@aosc.io>

Allwinner V3s SoC features a "Display Engine 2.0" with only one TCON
which have RGB LCD output.

Add device nodes for it as well as the TCON.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
 arch/arm/boot/dts/sun8i-v3s.dtsi | 87 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index 71075969e5e6..0a895179d8ae 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -41,6 +41,10 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun8i-v3s-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-v3s-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
 
 / {
 	#address-cells = <1>;
@@ -59,6 +63,12 @@
 		};
 	};
 
+	de: display-engine {
+		compatible = "allwinner,sun8i-v3s-display-engine";
+		allwinner,pipelines = <&de2_mixer0>;
+		status = "disabled";
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -93,6 +103,83 @@
 		#size-cells = <1>;
 		ranges;
 
+		de2_clocks: clock at 1000000 {
+			compatible = "allwinner,sun50i-h5-de2-clk";
+			reg = <0x01000000 0x100000>;
+			clocks = <&ccu CLK_DE>,
+				 <&ccu CLK_BUS_DE>;
+			clock-names = "mod",
+				      "bus";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		de2_mixer0: mixer at 1100000 {
+			compatible = "allwinner,sun8i-v3s-de2-mixer";
+			reg = <0x01100000 0x100000>;
+			clocks = <&de2_clocks CLK_MIXER0>,
+				 <&de2_clocks CLK_BUS_MIXER0>;
+			clock-names = "mod",
+				      "bus";
+			resets = <&de2_clocks RST_MIXER0>;
+			assigned-clocks = <&de2_clocks CLK_MIXER0>;
+			assigned-clock-rates = <150000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port at 1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint at 0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		tcon0: lcd-controller at 1c0c000 {
+			compatible = "allwinner,sun8i-v3s-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>,
+				 <&ccu CLK_TCON0>;
+			clock-names = "ahb",
+				      "tcon-ch0";
+			clock-output-names = "tcon-pixel-clock";
+			resets = <&ccu RST_BUS_TCON0>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port at 0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint at 0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port at 1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
+
 		mmc0: mmc at 01c0f000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
-- 
2.12.2

  parent reply	other threads:[~2017-05-04 11:51 UTC|newest]

Thread overview: 108+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-04 11:48 [PATCH v6 00/13] Initial Allwinner Display Engine 2.0 Support Icenowy Zheng
2017-05-04 11:48 ` Icenowy Zheng
2017-05-04 11:48 ` Icenowy Zheng
2017-05-04 11:48 ` [PATCH v6 01/13] dt-bindings: add binding for the Allwinner DE2 CCU Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-04 11:48 ` [PATCH v6 02/13] clk: sunxi-ng: add support for " Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-04 12:50   ` Maxime Ripard
2017-05-04 12:50     ` Maxime Ripard
2017-05-04 12:50     ` Maxime Ripard
2017-05-04 11:48 ` [PATCH v6 03/13] dt-bindings: add bindings for DE2 on V3s SoC Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-05  3:24   ` [linux-sunxi] " Chen-Yu Tsai
2017-05-05  3:24     ` Chen-Yu Tsai
2017-05-04 11:48 ` [PATCH v6 04/13] drm/sun4i: return only planes for layers created Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-04 11:48 ` [PATCH v6 05/13] drm/sun4i: abstract a engine type Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-05  2:56   ` [linux-sunxi] " Chen-Yu Tsai
2017-05-05  2:56     ` Chen-Yu Tsai
2017-05-05  8:36     ` icenowy
2017-05-05  8:36       ` icenowy at aosc.io
2017-05-05  8:36       ` icenowy-h8G6r0blFSE
2017-05-05  8:38       ` Chen-Yu Tsai
2017-05-05  8:38         ` Chen-Yu Tsai
2017-05-05  8:38         ` Chen-Yu Tsai
2017-05-04 11:48 ` [PATCH v6 06/13] drm/sun4i: add a dedicated module for sun4i-backend and sun4i-layer Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-05  3:10   ` [linux-sunxi] " Chen-Yu Tsai
2017-05-05  3:10     ` Chen-Yu Tsai
2017-05-05  3:10     ` Chen-Yu Tsai
2017-05-04 11:48 ` [PATCH v6 07/13] drm/sun4i: add a Kconfig option for sun4i-backend Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-05  3:14   ` [linux-sunxi] " Chen-Yu Tsai
2017-05-05  3:14     ` Chen-Yu Tsai
2017-05-05  3:14     ` Chen-Yu Tsai
2017-05-04 11:48 ` [PATCH v6 08/13] drm/sun4i: add support for Allwinner DE2 mixers Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-04 13:05   ` Maxime Ripard
2017-05-04 13:05     ` Maxime Ripard
2017-05-04 13:05     ` Maxime Ripard
2017-05-04 16:50     ` icenowy
2017-05-04 16:50       ` icenowy at aosc.io
2017-05-04 16:50       ` icenowy-h8G6r0blFSE
2017-05-04 16:57       ` icenowy
2017-05-04 16:57         ` icenowy at aosc.io
2017-05-04 16:57         ` icenowy-h8G6r0blFSE
2017-05-04 17:14         ` icenowy
2017-05-04 17:14           ` icenowy at aosc.io
2017-05-05 12:36       ` Maxime Ripard
2017-05-05 12:36         ` Maxime Ripard
2017-05-05 12:39         ` Icenowy Zheng
2017-05-05 12:39           ` Icenowy Zheng
2017-05-05 12:39           ` Icenowy Zheng
2017-05-09 20:19           ` Maxime Ripard
2017-05-09 20:19             ` Maxime Ripard
2017-05-09 20:19             ` Maxime Ripard
2017-05-04 16:52     ` icenowy
2017-05-04 16:52       ` icenowy at aosc.io
2017-05-04 16:52       ` icenowy-h8G6r0blFSE
2017-05-05  3:40       ` [linux-sunxi] " Chen-Yu Tsai
2017-05-05  3:40         ` Chen-Yu Tsai
2017-05-05  3:40         ` Chen-Yu Tsai
2017-05-05  3:40         ` Chen-Yu Tsai
2017-05-04 11:48 ` [PATCH v6 09/13] drm/sun4i: Add compatible string for V3s display engine Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-04 11:48 ` [PATCH v6 10/13] drm/sun4i: tcon: add support for V3s TCON Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-05  3:33   ` [linux-sunxi] " Chen-Yu Tsai
2017-05-05  3:33     ` Chen-Yu Tsai
2017-05-05  3:33     ` Chen-Yu Tsai
2017-05-04 11:48 ` Icenowy Zheng [this message]
2017-05-04 11:48   ` [PATCH v6 11/13] ARM: dts: sun8i: add DE2 nodes for V3s SoC Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-05  3:31   ` [linux-sunxi] " Chen-Yu Tsai
2017-05-05  3:31     ` Chen-Yu Tsai
2017-05-05  3:31     ` Chen-Yu Tsai
2017-05-05  8:53     ` [linux-sunxi] " icenowy
2017-05-05  8:53       ` icenowy at aosc.io
2017-05-05  8:53       ` icenowy-h8G6r0blFSE
2017-05-05 12:30       ` [linux-sunxi] " Maxime Ripard
2017-05-05 12:30         ` Maxime Ripard
2017-05-05 12:34         ` Icenowy Zheng
2017-05-05 12:34           ` Icenowy Zheng
2017-05-05 12:34           ` Icenowy Zheng
2017-05-09 19:26           ` [linux-sunxi] " Maxime Ripard
2017-05-09 19:26             ` Maxime Ripard
2017-05-09 19:26             ` Maxime Ripard
2017-05-04 11:48 ` [PATCH v6 12/13] ARM: dts: sun8i: add pinmux for LCD pins of " Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-05  3:25   ` [linux-sunxi] " Chen-Yu Tsai
2017-05-05  3:25     ` Chen-Yu Tsai
2017-05-05  3:25     ` Chen-Yu Tsai
2017-05-04 11:48 ` [PATCH v6 13/13] [DO NOT MERGE] ARM: dts: sun8i: enable LCD panel of Lichee Pi Zero Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng
2017-05-04 11:48   ` Icenowy Zheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170504114858.9008-12-icenowy@aosc.io \
    --to=icenowy@aosc.io \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.