* [U-Boot] [PATCH] [V2] bcm2835: wdt: support for the bcm2835/2836 wdt
@ 2017-02-10 16:28 Paolo Pisati
2017-02-10 16:28 ` [U-Boot] [PATCH] bcm2835_wdt: support for the BCM2835/2836 watchdog Paolo Pisati
0 siblings, 1 reply; 3+ messages in thread
From: Paolo Pisati @ 2017-02-10 16:28 UTC (permalink / raw)
To: u-boot
The following patch add support for the watchdog built into the
bcm2835/2836 chips, using the max timeout (~15s).
Tested on my RaspberryPi2.
Changelog:
v2: fixed __eufi_runtime usage and moved to Kconfig
Paolo Pisati (1):
bcm2835_wdt: support for the BCM2835/2836 watchdog
arch/arm/mach-bcm283x/reset.c | 21 ++++++++++++++++++---
board/raspberrypi/rpi/rpi.c | 4 ++++
drivers/watchdog/Kconfig | 15 +++++++++++++++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/bcm2835_wdt.c | 35 +++++++++++++++++++++++++++++++++++
5 files changed, 73 insertions(+), 3 deletions(-)
create mode 100644 drivers/watchdog/bcm2835_wdt.c
--
2.7.4
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH] bcm2835_wdt: support for the BCM2835/2836 watchdog
2017-02-10 16:28 [U-Boot] [PATCH] [V2] bcm2835: wdt: support for the bcm2835/2836 wdt Paolo Pisati
@ 2017-02-10 16:28 ` Paolo Pisati
2017-05-10 17:51 ` [U-Boot] " Tom Rini
0 siblings, 1 reply; 3+ messages in thread
From: Paolo Pisati @ 2017-02-10 16:28 UTC (permalink / raw)
To: u-boot
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
---
arch/arm/mach-bcm283x/reset.c | 21 ++++++++++++++++++---
board/raspberrypi/rpi/rpi.c | 4 ++++
drivers/watchdog/Kconfig | 15 +++++++++++++++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/bcm2835_wdt.c | 35 +++++++++++++++++++++++++++++++++++
5 files changed, 73 insertions(+), 3 deletions(-)
create mode 100644 drivers/watchdog/bcm2835_wdt.c
diff --git a/arch/arm/mach-bcm283x/reset.c b/arch/arm/mach-bcm283x/reset.c
index 685815c..b62cb8a 100644
--- a/arch/arm/mach-bcm283x/reset.c
+++ b/arch/arm/mach-bcm283x/reset.c
@@ -21,18 +21,33 @@
*/
#define BCM2835_WDOG_RSTS_RASPBERRYPI_HALT 0x555
+/* max ticks timeout */
+#define BCM2835_WDOG_MAX_TIMEOUT 0x000fffff
+
+#ifdef CONFIG_BCM2835_WDT
+extern void hw_watchdog_disable(void);
+#else
+void hw_watchdog_disable(void) {}
+#endif
+
__efi_runtime_data struct bcm2835_wdog_regs *wdog_regs =
(struct bcm2835_wdog_regs *)BCM2835_WDOG_PHYSADDR;
-void __efi_runtime reset_cpu(ulong addr)
+void __efi_runtime reset_cpu(ulong ticks)
{
- uint32_t rstc;
+ uint32_t rstc, timeout;
+
+ if (ticks == 0) {
+ hw_watchdog_disable();
+ timeout = RESET_TIMEOUT;
+ } else
+ timeout = ticks & BCM2835_WDOG_MAX_TIMEOUT;
rstc = readl(&wdog_regs->rstc);
rstc &= ~BCM2835_WDOG_RSTC_WRCFG_MASK;
rstc |= BCM2835_WDOG_RSTC_WRCFG_FULL_RESET;
- writel(BCM2835_WDOG_PASSWORD | RESET_TIMEOUT, &wdog_regs->wdog);
+ writel(BCM2835_WDOG_PASSWORD | timeout, &wdog_regs->wdog);
writel(BCM2835_WDOG_PASSWORD | rstc, &wdog_regs->rstc);
}
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index 22e87a2..106e518 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -22,6 +22,7 @@
#ifdef CONFIG_ARM64
#include <asm/armv8/mmu.h>
#endif
+#include <watchdog.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -478,6 +479,9 @@ static void rpi_disable_inactive_uart(void)
int board_init(void)
{
+#ifdef CONFIG_HW_WATCHDOG
+ hw_watchdog_init();
+#endif
#ifndef CONFIG_PL01X_SERIAL
rpi_disable_inactive_uart();
#endif
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index e69de29..1a84c41 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -0,0 +1,15 @@
+menu "Watchdog support"
+
+config HW_WATCHDOG
+ bool
+
+config BCM2835_WDT
+ bool "Enable BCM2835/2836 watchdog driver"
+ select HW_WATCHDOG
+ help
+ Say Y here to enable the BCM2835/2836 watchdog
+
+ This provides basic infrastructure to support BCM2835/2836 watchdog
+ hardware, with a max timeout of ~15secs.
+
+endmenu
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index a007ae8..3b328ec 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o
obj-$(CONFIG_BFIN_WATCHDOG) += bfin_wdt.o
obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
obj-$(CONFIG_DESIGNWARE_WATCHDOG) += designware_wdt.o
+obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c
new file mode 100644
index 0000000..6f753ae
--- /dev/null
+++ b/drivers/watchdog/bcm2835_wdt.c
@@ -0,0 +1,35 @@
+/*
+ * Watchdog driver for Broadcom BCM2835
+ *
+ * Copyright (C) 2017 Paolo Pisati <p.pisati@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <efi_loader.h>
+#include <asm/io.h>
+#include <asm/arch/wdog.h>
+
+#define SECS_TO_WDOG_TICKS(x) ((x) << 16)
+#define MAX_TIMEOUT 0xf /* ~15s */
+
+static __efi_runtime_data bool enabled = true;
+
+extern void reset_cpu(ulong ticks);
+
+void hw_watchdog_reset(void)
+{
+ if (enabled)
+ reset_cpu(SECS_TO_WDOG_TICKS(MAX_TIMEOUT));
+}
+
+void hw_watchdog_init(void)
+{
+ hw_watchdog_reset();
+}
+
+void __efi_runtime hw_watchdog_disable(void)
+{
+ enabled = false;
+}
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [U-Boot] bcm2835_wdt: support for the BCM2835/2836 watchdog
2017-02-10 16:28 ` [U-Boot] [PATCH] bcm2835_wdt: support for the BCM2835/2836 watchdog Paolo Pisati
@ 2017-05-10 17:51 ` Tom Rini
0 siblings, 0 replies; 3+ messages in thread
From: Tom Rini @ 2017-05-10 17:51 UTC (permalink / raw)
To: u-boot
On Fri, Feb 10, 2017 at 05:28:05PM +0100, Paolo Pisati wrote:
> Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
After some fiddling of the Kconfig parts, applied to u-boot/master,
thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170510/bca2c79d/attachment.sig>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-05-10 17:51 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-10 16:28 [U-Boot] [PATCH] [V2] bcm2835: wdt: support for the bcm2835/2836 wdt Paolo Pisati
2017-02-10 16:28 ` [U-Boot] [PATCH] bcm2835_wdt: support for the BCM2835/2836 watchdog Paolo Pisati
2017-05-10 17:51 ` [U-Boot] " Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.