* [PATCH v3] cros_ec_i2c: prevent i2c timeout for EC_CMD_FLASH_ERASE
@ 2017-05-15 18:01 Wei-Ning Huang
0 siblings, 0 replies; only message in thread
From: Wei-Ning Huang @ 2017-05-15 18:01 UTC (permalink / raw)
To: LKML
Cc: Douglas Anderson, Duncan Laurie, Andrew de los Reyes,
Wei-Ning Huang, lee.jones
From: Wei-Ning Huang <wnhuang@chromium.org>
Some EC chip has larger flash sector size which requires longer erase
time. During erase the CPU is usually stalled and can't even respond to
interrupts. We sleep a while to block any EC command from executing
during the flash erase period.
Signed-off-by: Wei-Ning Huang <wnhuang@chromium.org>
---
drivers/mfd/cros_ec_i2c.c | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/cros_ec_i2c.c b/drivers/mfd/cros_ec_i2c.c
index 9f70de1e4c70..c1b5c831b9cb 100644
--- a/drivers/mfd/cros_ec_i2c.c
+++ b/drivers/mfd/cros_ec_i2c.c
@@ -23,6 +23,14 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
+/*
+ * Some EC chip has larger flash sector size which requires longer erase time.
+ * During erase the CPU is usually stalled and can't even respond to
+ * interrupts. We sleep for a while to block any EC command from executing
+ * during the flash erase period to prevent i2c timeout.
+ */
+#define EC_FLASH_ERASE_DELAY_MS 5000
+
/**
* Request format for protocol v3
* byte 0 0xda (EC_COMMAND_PROTOCOL_3)
@@ -120,7 +128,7 @@ static int cros_ec_pkt_xfer_i2c(struct cros_ec_device *ec_dev,
ret = -EAGAIN;
dev_dbg(ec_dev->dev, "command 0x%02x in progress\n",
msg->command);
- goto done;
+ goto inprogress;
default:
dev_dbg(ec_dev->dev, "command 0x%02x returned %d\n",
@@ -177,7 +185,19 @@ static int cros_ec_pkt_xfer_i2c(struct cros_ec_device *ec_dev,
ret = ec_response->data_len;
+inprogress:
+ /*
+ * If we get EC_RES_IN_PROGRESS for EC_CMD_FLASH_ERASE this means EC
+ * need a long time to erase flash, during flash erase CPU is stalled
+ * and can't respond to interrupts, so we sleep for a while to stop new
+ * EC commands from communicating with EC.
+ */
+ if (msg->command == EC_CMD_FLASH_ERASE &&
+ msg->result == EC_RES_IN_PROGRESS)
+ msleep(EC_FLASH_ERASE_DELAY_MS);
+
done:
+
if (msg->command == EC_CMD_REBOOT_EC)
msleep(EC_REBOOT_DELAY_MS);
--
2.12.2
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2017-05-16 2:37 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-05-15 18:01 [PATCH v3] cros_ec_i2c: prevent i2c timeout for EC_CMD_FLASH_ERASE Wei-Ning Huang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.