[PATCH 3.18 00/59] 3.18.55-stable review

[PATCH 3.18 00/59] 3.18.55-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.18.55 release.
There are 59 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu May 25 20:08:28 UTC 2017.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.55-rc1.gz
or in the git tree and branch at:
  git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.18.55-rc1

Maksim Salau <maksim.salau@gmail.com>
    usb: misc: legousbtower: Fix memory leak

Julius Werner <jwerner@chromium.org>
    drivers: char: mem: Check for address space wraparound with mmap()

Lukas Wunner <lukas@wunner.de>
    PCI: Freeze PME scan before suspending devices

David Woodhouse <dwmw@amazon.co.uk>
    PCI: Fix pci_mmap_fits() for HAVE_PCI_RESOURCE_TO_USER platforms

Thomas Gleixner <tglx@linutronix.de>
    tracing/kprobes: Enforce kprobes teardown after testing

Al Viro <viro@zeniv.linux.org.uk>
    osf_wait4(): fix infoleak

Johan Hovold <johan@kernel.org>
    uwb: fix device quirk on big-endian hosts

Daniel Micay <danielmicay@gmail.com>
    stackprotector: Increase the per-task stack canary's random range from 32 bits to 64 bits on 64-bit platforms

James Hogan <james.hogan@imgtec.com>
    metag/uaccess: Check access_ok in strncpy_from_user

James Hogan <james.hogan@imgtec.com>
    metag/uaccess: Fix access_ok()

Keno Fischer <keno@juliacomputing.com>
    mm/huge_memory.c: respect FOLL_FORCE/FOLL_COW for thp

Takashi Iwai <tiwai@suse.de>
    xc2028: Fix use-after-free bug properly

Kristina Martsenko <kristina.martsenko@arm.com>
    arm64: documentation: document tagged pointer stack constraints

Mark Rutland <mark.rutland@arm.com>
    arm64: uaccess: ensure extension of access_ok() addr

Ludovic Desroches <ludovic.desroches@microchip.com>
    ARM: dts: at91: sama5d3_xplained: not all ADC channels are available

Ludovic Desroches <ludovic.desroches@microchip.com>
    ARM: dts: at91: sama5d3_xplained: fix ADC vref

Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
    powerpc/pseries: Fix of_node_put() underflow during DLPAR remove

Johan Hovold <johan@kernel.org>
    cx231xx-audio: fix NULL-deref at probe

Johan Hovold <johan@kernel.org>
    cx231xx-cards: fix NULL-deref at probe

Alyssa Milburn <amilburn@zall.org>
    zr364xx: enforce minimum size when reading header

Johan Hovold <johan@kernel.org>
    dib0700: fix NULL-deref at probe

Marek Szyprowski <m.szyprowski@samsung.com>
    s5p-mfc: Fix unbalanced call to clock management

Johan Hovold <johan@kernel.org>
    gspca: konica: add missing endpoint sanity check

Matt Ranostay <matt.ranostay@konsulko.com>
    iio: proximity: as3935: fix as3935_write

Dan Carpenter <dan.carpenter@oracle.com>
    ipx: call ipxitf_put() in ioctl error path

Peter Hurley <peter@hurleysoftware.com>
    tty: Prevent ldisc drivers from re-using stale tty fields

Johan Hovold <johan@kernel.org>
    USB: hub: fix non-SS hub-descriptor handling

Johan Hovold <johan@kernel.org>
    USB: hub: fix SS hub-descriptor handling

Johan Hovold <johan@kernel.org>
    USB: serial: io_ti: fix div-by-zero in set_termios

Johan Hovold <johan@kernel.org>
    USB: serial: mct_u232: fix big-endian baud-rate handling

Bjørn Mork <bjorn@mork.no>
    USB: serial: qcserial: add more Lenovo EM74xx device IDs

Daniele Palmas <dnlplm@gmail.com>
    usb: serial: option: add Telit ME910 support

Johan Hovold <johan@kernel.org>
    USB: iowarrior: fix info ioctl on big-endian hosts

Peter Ujfalusi <peter.ujfalusi@ti.com>
    usb: musb: tusb6010_omap: Do not reset the other direction's packet size

Alyssa Milburn <amilburn@zall.org>
    ttusb2: limit messages to buffer size

Johan Hovold <johan@kernel.org>
    mceusb: fix NULL-deref at probe

Johan Hovold <johan@kernel.org>
    usbvision: fix NULL-deref at probe

Johan Hovold <johan@kernel.org>
    net: irda: irda-usb: fix firmware name on big-endian hosts

Peter Chen <peter.chen@nxp.com>
    usb: host: xhci-mem: allocate zeroed Scratchpad Buffer

Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
    usb: host: xhci-plat: propagate return value of platform_get_irq()

Andrey Korolyov <andrey@xdel.ru>
    USB: serial: ftdi_sio: add Olimex ARM-USB-TINY(H) PIDs

Anthony Mallet <anthony.mallet@laas.fr>
    USB: serial: ftdi_sio: fix setting latency for unprivileged users

Eric W. Biederman <ebiederm@xmission.com>
    pid_ns: Sleep in TASK_INTERRUPTIBLE in zap_pid_ns_processes

Pavel Roskin <plroskin@gmail.com>
    iio: dac: ad7303: fix channel description

Johan Hovold <johan@kernel.org>
    of: fdt: add missing allocation-failure check

Rob Herring <robh@kernel.org>
    of: fix sparse warning in of_pci_range_parser_one

Tobias Herzog <t-herzog@gmx.de>
    cdc-acm: fix possible invalid access when processing notification

Johan Hovold <johan@kernel.org>
    ath9k_htc: fix NULL-deref at probe

Richard Cochran <rcochran@linutronix.de>
    regulator: tps65023: Fix inverted core enable logic.

Daniel Glöckner <dg@emlix.com>
    ima: accept previously set IMA_NEW_FILE

Brian Norris <briannorris@chromium.org>
    mwifiex: pcie: fix cmd_buf use-after-free in remove/reset

Joe Thornber <ejt@redhat.com>
    dm space map disk: fix some book keeping in the disk space map

Joe Thornber <ejt@redhat.com>
    dm thin metadata: call precommit before saving the roots

Mikulas Patocka <mpatocka@redhat.com>
    dm bufio: avoid a possible ABBA deadlock

Vinothkumar Raja <vinraja@cs.stonybrook.edu>
    dm btree: fix for dm_btree_find_lowest_key()

Vamsi Krishna Samavedam <vskrishn@codeaurora.org>
    USB: core: replace %p with %pK

Willy Tarreau <w@1wt.eu>
    char: lp: fix possible integer overflow in lp_setup()

Johan Hovold <johan@kernel.org>
    watchdog: pcwd_usb: fix NULL-deref at probe

Alan Stern <stern@rowland.harvard.edu>
    USB: ene_usb6250: fix DMA to the stack


-------------

Diffstat:

 Documentation/arm64/tagged-pointers.txt        | 62 +++++++++++++-----
 Makefile                                       |  4 +-
 arch/alpha/kernel/osf_sys.c                    |  6 +-
 arch/arm/boot/dts/at91-sama5d3_xplained.dts    |  5 +-
 arch/arm64/include/asm/uaccess.h               |  3 +-
 arch/metag/include/asm/uaccess.h               | 49 ++++++++------
 arch/powerpc/platforms/pseries/dlpar.c         |  1 -
 drivers/char/lp.c                              |  6 +-
 drivers/char/mem.c                             |  5 ++
 drivers/iio/dac/ad7303.c                       |  6 +-
 drivers/iio/proximity/as3935.c                 |  3 +-
 drivers/md/dm-bufio.c                          |  9 +--
 drivers/md/dm-thin-metadata.c                  |  4 +-
 drivers/md/persistent-data/dm-btree.c          |  8 ++-
 drivers/md/persistent-data/dm-space-map-disk.c | 15 ++++-
 drivers/media/platform/s5p-mfc/s5p_mfc.c       |  1 +
 drivers/media/rc/mceusb.c                      |  4 +-
 drivers/media/tuners/tuner-xc2028.c            | 37 +++++------
 drivers/media/usb/cx231xx/cx231xx-audio.c      | 15 ++++-
 drivers/media/usb/cx231xx/cx231xx-cards.c      | 45 +++++++++++--
 drivers/media/usb/dvb-usb/dib0700_core.c       |  3 +
 drivers/media/usb/dvb-usb/ttusb2.c             | 19 ++++++
 drivers/media/usb/gspca/konica.c               |  3 +
 drivers/media/usb/usbvision/usbvision-video.c  |  9 ++-
 drivers/media/usb/zr364xx/zr364xx.c            |  8 +++
 drivers/net/irda/irda-usb.c                    |  2 +-
 drivers/net/wireless/ath/ath9k/hif_usb.c       |  3 +
 drivers/net/wireless/mwifiex/pcie.c            |  7 ++
 drivers/of/address.c                           |  2 +-
 drivers/of/fdt.c                               |  3 +
 drivers/pci/pci-sysfs.c                        | 10 ++-
 drivers/pci/pci.c                              |  9 +--
 drivers/regulator/tps65023-regulator.c         |  3 +-
 drivers/tty/tty_ldisc.c                        |  7 ++
 drivers/usb/class/cdc-acm.c                    | 13 ++--
 drivers/usb/core/devio.c                       |  4 +-
 drivers/usb/core/hcd.c                         |  4 +-
 drivers/usb/core/hub.c                         | 19 ++++--
 drivers/usb/core/urb.c                         |  2 +-
 drivers/usb/host/xhci-mem.c                    |  2 +-
 drivers/usb/host/xhci-plat.c                   |  2 +-
 drivers/usb/misc/iowarrior.c                   |  2 +-
 drivers/usb/misc/legousbtower.c                |  1 +
 drivers/usb/musb/tusb6010_omap.c               | 13 ++--
 drivers/usb/serial/ftdi_sio.c                  | 10 +--
 drivers/usb/serial/ftdi_sio_ids.h              |  2 +
 drivers/usb/serial/io_ti.c                     |  5 +-
 drivers/usb/serial/mct_u232.c                  |  2 +-
 drivers/usb/serial/option.c                    |  8 +++
 drivers/usb/serial/qcserial.c                  |  2 +
 drivers/usb/storage/ene_ub6250.c               | 90 ++++++++++++++++----------
 drivers/uwb/i1480/dfu/usb.c                    |  5 +-
 drivers/watchdog/pcwd_usb.c                    |  3 +
 include/linux/kprobes.h                        |  4 +-
 kernel/fork.c                                  |  2 +-
 kernel/kprobes.c                               |  2 +-
 kernel/pid_namespace.c                         |  2 +-
 kernel/trace/trace_kprobe.c                    |  5 ++
 mm/huge_memory.c                               | 12 +++-
 net/ipx/af_ipx.c                               |  5 +-
 security/integrity/ima/ima_appraise.c          |  5 +-
 61 files changed, 428 insertions(+), 174 deletions(-)

[PATCH 3.18 01/59] USB: ene_usb6250: fix DMA to the stack

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit 628c2893d44876ddd11602400c70606ade62e129 upstream.

The ene_usb6250 sub-driver in usb-storage does USB I/O to buffers on
the stack, which doesn't work with vmapped stacks.  This patch fixes
the problem by allocating a separate 512-byte buffer at probe time and
using it for all of the offending I/O operations.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Andreas Hartmann <andihartmann@01019freenet.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/storage/ene_ub6250.c |   90 +++++++++++++++++++++++----------------
 1 file changed, 55 insertions(+), 35 deletions(-)

--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -443,6 +443,10 @@ struct ms_lib_ctrl {
 #define SD_BLOCK_LEN  9
 
 struct ene_ub6250_info {
+
+	/* I/O bounce buffer */
+	u8		*bbuf;
+
 	/* for 6250 code */
 	struct SD_STATUS	SD_Status;
 	struct MS_STATUS	MS_Status;
@@ -490,8 +494,11 @@ static int ene_load_bincode(struct us_da
 
 static void ene_ub6250_info_destructor(void *extra)
 {
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) extra;
+
 	if (!extra)
 		return;
+	kfree(info->bbuf);
 }
 
 static int ene_send_scsi_cmd(struct us_data *us, u8 fDir, void *buf, int use_sg)
@@ -855,8 +862,9 @@ static int ms_read_readpage(struct us_da
 		u8 PageNum, u32 *PageBuf, struct ms_lib_type_extdat *ExtraDat)
 {
 	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+	u8 *bbuf = info->bbuf;
 	int result;
-	u8 ExtBuf[4];
 	u32 bn = PhyBlockAddr * 0x20 + PageNum;
 
 	/* printk(KERN_INFO "MS --- MS_ReaderReadPage,
@@ -899,7 +907,7 @@ static int ms_read_readpage(struct us_da
 	bcb->CDB[2]     = (unsigned char)(PhyBlockAddr>>16);
 	bcb->CDB[6]     = 0x01;
 
-	result = ene_send_scsi_cmd(us, FDIR_READ, &ExtBuf, 0);
+	result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
 
@@ -908,9 +916,9 @@ static int ms_read_readpage(struct us_da
 	ExtraDat->status0  = 0x10;  /* Not yet,fireware support */
 
 	ExtraDat->status1  = 0x00;  /* Not yet,fireware support */
-	ExtraDat->ovrflg   = ExtBuf[0];
-	ExtraDat->mngflg   = ExtBuf[1];
-	ExtraDat->logadr   = memstick_logaddr(ExtBuf[2], ExtBuf[3]);
+	ExtraDat->ovrflg   = bbuf[0];
+	ExtraDat->mngflg   = bbuf[1];
+	ExtraDat->logadr   = memstick_logaddr(bbuf[2], bbuf[3]);
 
 	return USB_STOR_TRANSPORT_GOOD;
 }
@@ -1336,8 +1344,9 @@ static int ms_lib_read_extra(struct us_d
 				u8 PageNum, struct ms_lib_type_extdat *ExtraDat)
 {
 	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+	u8 *bbuf = info->bbuf;
 	int result;
-	u8 ExtBuf[4];
 
 	/* printk("MS_LibReadExtra --- PhyBlock = %x, PageNum = %x\n", PhyBlock, PageNum); */
 	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
@@ -1352,7 +1361,7 @@ static int ms_lib_read_extra(struct us_d
 	bcb->CDB[2]     = (unsigned char)(PhyBlock>>16);
 	bcb->CDB[6]     = 0x01;
 
-	result = ene_send_scsi_cmd(us, FDIR_READ, &ExtBuf, 0);
+	result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
 
@@ -1360,9 +1369,9 @@ static int ms_lib_read_extra(struct us_d
 	ExtraDat->intr     = 0x80;  /* Not yet, waiting for fireware support */
 	ExtraDat->status0  = 0x10;  /* Not yet, waiting for fireware support */
 	ExtraDat->status1  = 0x00;  /* Not yet, waiting for fireware support */
-	ExtraDat->ovrflg   = ExtBuf[0];
-	ExtraDat->mngflg   = ExtBuf[1];
-	ExtraDat->logadr   = memstick_logaddr(ExtBuf[2], ExtBuf[3]);
+	ExtraDat->ovrflg   = bbuf[0];
+	ExtraDat->mngflg   = bbuf[1];
+	ExtraDat->logadr   = memstick_logaddr(bbuf[2], bbuf[3]);
 
 	return USB_STOR_TRANSPORT_GOOD;
 }
@@ -1566,9 +1575,9 @@ static int ms_lib_scan_logicalblocknumbe
 	u16 PhyBlock, newblk, i;
 	u16 LogStart, LogEnde;
 	struct ms_lib_type_extdat extdat;
-	u8 buf[0x200];
 	u32 count = 0, index = 0;
 	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+	u8 *bbuf = info->bbuf;
 
 	for (PhyBlock = 0; PhyBlock < info->MS_Lib.NumberOfPhyBlock;) {
 		ms_lib_phy_to_log_range(PhyBlock, &LogStart, &LogEnde);
@@ -1582,14 +1591,16 @@ static int ms_lib_scan_logicalblocknumbe
 			}
 
 			if (count == PhyBlock) {
-				ms_lib_read_extrablock(us, PhyBlock, 0, 0x80, &buf);
+				ms_lib_read_extrablock(us, PhyBlock, 0, 0x80,
+						bbuf);
 				count += 0x80;
 			}
 			index = (PhyBlock % 0x80) * 4;
 
-			extdat.ovrflg = buf[index];
-			extdat.mngflg = buf[index+1];
-			extdat.logadr = memstick_logaddr(buf[index+2], buf[index+3]);
+			extdat.ovrflg = bbuf[index];
+			extdat.mngflg = bbuf[index+1];
+			extdat.logadr = memstick_logaddr(bbuf[index+2],
+					bbuf[index+3]);
 
 			if ((extdat.ovrflg & MS_REG_OVR_BKST) != MS_REG_OVR_BKST_OK) {
 				ms_lib_setacquired_errorblock(us, PhyBlock);
@@ -2072,9 +2083,9 @@ static int ene_ms_init(struct us_data *u
 {
 	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
 	int result;
-	u8 buf[0x200];
 	u16 MSP_BlockSize, MSP_UserAreaBlocks;
 	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+	u8 *bbuf = info->bbuf;
 
 	printk(KERN_INFO "transport --- ENE_MSInit\n");
 
@@ -2093,13 +2104,13 @@ static int ene_ms_init(struct us_data *u
 	bcb->CDB[0]     = 0xF1;
 	bcb->CDB[1]     = 0x01;
 
-	result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0);
+	result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
 	if (result != USB_STOR_XFER_GOOD) {
 		printk(KERN_ERR "Execution MS Init Code Fail !!\n");
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 	/* the same part to test ENE */
-	info->MS_Status = *(struct MS_STATUS *)&buf[0];
+	info->MS_Status = *(struct MS_STATUS *) bbuf;
 
 	if (info->MS_Status.Insert && info->MS_Status.Ready) {
 		printk(KERN_INFO "Insert     = %x\n", info->MS_Status.Insert);
@@ -2108,15 +2119,15 @@ static int ene_ms_init(struct us_data *u
 		printk(KERN_INFO "IsMSPHG    = %x\n", info->MS_Status.IsMSPHG);
 		printk(KERN_INFO "WtP= %x\n", info->MS_Status.WtP);
 		if (info->MS_Status.IsMSPro) {
-			MSP_BlockSize      = (buf[6] << 8) | buf[7];
-			MSP_UserAreaBlocks = (buf[10] << 8) | buf[11];
+			MSP_BlockSize      = (bbuf[6] << 8) | bbuf[7];
+			MSP_UserAreaBlocks = (bbuf[10] << 8) | bbuf[11];
 			info->MSP_TotalBlock = MSP_BlockSize * MSP_UserAreaBlocks;
 		} else {
 			ms_card_init(us); /* Card is MS (to ms.c)*/
 		}
 		usb_stor_dbg(us, "MS Init Code OK !!\n");
 	} else {
-		usb_stor_dbg(us, "MS Card Not Ready --- %x\n", buf[0]);
+		usb_stor_dbg(us, "MS Card Not Ready --- %x\n", bbuf[0]);
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
@@ -2126,9 +2137,9 @@ static int ene_ms_init(struct us_data *u
 static int ene_sd_init(struct us_data *us)
 {
 	int result;
-	u8  buf[0x200];
 	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
 	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+	u8 *bbuf = info->bbuf;
 
 	usb_stor_dbg(us, "transport --- ENE_SDInit\n");
 	/* SD Init Part-1 */
@@ -2162,17 +2173,17 @@ static int ene_sd_init(struct us_data *u
 	bcb->Flags              = US_BULK_FLAG_IN;
 	bcb->CDB[0]             = 0xF1;
 
-	result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0);
+	result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
 	if (result != USB_STOR_XFER_GOOD) {
 		usb_stor_dbg(us, "Execution SD Init Code Fail !!\n");
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
-	info->SD_Status =  *(struct SD_STATUS *)&buf[0];
+	info->SD_Status =  *(struct SD_STATUS *) bbuf;
 	if (info->SD_Status.Insert && info->SD_Status.Ready) {
 		struct SD_STATUS *s = &info->SD_Status;
 
-		ene_get_card_status(us, (unsigned char *)&buf);
+		ene_get_card_status(us, bbuf);
 		usb_stor_dbg(us, "Insert     = %x\n", s->Insert);
 		usb_stor_dbg(us, "Ready      = %x\n", s->Ready);
 		usb_stor_dbg(us, "IsMMC      = %x\n", s->IsMMC);
@@ -2180,7 +2191,7 @@ static int ene_sd_init(struct us_data *u
 		usb_stor_dbg(us, "HiSpeed    = %x\n", s->HiSpeed);
 		usb_stor_dbg(us, "WtP        = %x\n", s->WtP);
 	} else {
-		usb_stor_dbg(us, "SD Card Not Ready --- %x\n", buf[0]);
+		usb_stor_dbg(us, "SD Card Not Ready --- %x\n", bbuf[0]);
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 	return USB_STOR_TRANSPORT_GOOD;
@@ -2190,13 +2201,15 @@ static int ene_sd_init(struct us_data *u
 static int ene_init(struct us_data *us)
 {
 	int result;
-	u8  misc_reg03 = 0;
+	u8  misc_reg03;
 	struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
+	u8 *bbuf = info->bbuf;
 
-	result = ene_get_card_type(us, REG_CARD_STATUS, &misc_reg03);
+	result = ene_get_card_type(us, REG_CARD_STATUS, bbuf);
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
 
+	misc_reg03 = bbuf[0];
 	if (misc_reg03 & 0x01) {
 		if (!info->SD_Status.Ready) {
 			result = ene_sd_init(us);
@@ -2312,8 +2325,9 @@ static int ene_ub6250_probe(struct usb_i
 			 const struct usb_device_id *id)
 {
 	int result;
-	u8  misc_reg03 = 0;
+	u8  misc_reg03;
 	struct us_data *us;
+	struct ene_ub6250_info *info;
 
 	result = usb_stor_probe1(&us, intf, id,
 		   (id - ene_ub6250_usb_ids) + ene_ub6250_unusual_dev_list);
@@ -2321,11 +2335,16 @@ static int ene_ub6250_probe(struct usb_i
 		return result;
 
 	/* FIXME: where should the code alloc extra buf ? */
-	if (!us->extra) {
-		us->extra = kzalloc(sizeof(struct ene_ub6250_info), GFP_KERNEL);
-		if (!us->extra)
-			return -ENOMEM;
-		us->extra_destructor = ene_ub6250_info_destructor;
+	us->extra = kzalloc(sizeof(struct ene_ub6250_info), GFP_KERNEL);
+	if (!us->extra)
+		return -ENOMEM;
+	us->extra_destructor = ene_ub6250_info_destructor;
+
+	info = (struct ene_ub6250_info *)(us->extra);
+	info->bbuf = kmalloc(512, GFP_KERNEL);
+	if (!info->bbuf) {
+		kfree(us->extra);
+		return -ENOMEM;
 	}
 
 	us->transport_name = "ene_ub6250";
@@ -2337,12 +2356,13 @@ static int ene_ub6250_probe(struct usb_i
 		return result;
 
 	/* probe card type */
-	result = ene_get_card_type(us, REG_CARD_STATUS, &misc_reg03);
+	result = ene_get_card_type(us, REG_CARD_STATUS, info->bbuf);
 	if (result != USB_STOR_XFER_GOOD) {
 		usb_stor_disconnect(intf);
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
+	misc_reg03 = info->bbuf[0];
 	if (!(misc_reg03 & 0x01)) {
 		pr_info("ums_eneub6250: This driver only supports SD/MS cards. "
 			"It does not support SM cards.\n");

[PATCH 3.18 02/59] watchdog: pcwd_usb: fix NULL-deref at probe

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 46c319b848268dab3f0e7c4a5b6e9146d3bca8a4 upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/watchdog/pcwd_usb.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/watchdog/pcwd_usb.c
+++ b/drivers/watchdog/pcwd_usb.c
@@ -630,6 +630,9 @@ static int usb_pcwd_probe(struct usb_int
 		return -ENODEV;
 	}
 
+	if (iface_desc->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
 	/* check out the endpoint: it has to be Interrupt & IN */
 	endpoint = &iface_desc->endpoint[0].desc;
 

[PATCH 3.18 03/59] char: lp: fix possible integer overflow in lp_setup()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Willy Tarreau <w@1wt.eu>

commit 3e21f4af170bebf47c187c1ff8bf155583c9f3b1 upstream.

The lp_setup() code doesn't apply any bounds checking when passing
"lp=none", and only in this case, resulting in an overflow of the
parport_nr[] array. All versions in Git history are affected.

Reported-By: Roee Hay <roee.hay@hcl.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/lp.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/char/lp.c
+++ b/drivers/char/lp.c
@@ -859,7 +859,11 @@ static int __init lp_setup (char *str)
 	} else if (!strcmp(str, "auto")) {
 		parport_nr[0] = LP_PARPORT_AUTO;
 	} else if (!strcmp(str, "none")) {
-		parport_nr[parport_ptr++] = LP_PARPORT_NONE;
+		if (parport_ptr < LP_NO)
+			parport_nr[parport_ptr++] = LP_PARPORT_NONE;
+		else
+			printk(KERN_INFO "lp: too many ports, %s ignored.\n",
+			       str);
 	} else if (!strcmp(str, "reset")) {
 		reset = 1;
 	}

[PATCH 3.18 04/59] USB: core: replace %p with %pK

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vamsi Krishna Samavedam <vskrishn@codeaurora.org>

commit 2f964780c03b73de269b08d12aff96a9618d13f3 upstream.

Format specifier %p can leak kernel addresses while not valuing the
kptr_restrict system settings. When kptr_restrict is set to (1), kernel
pointers printed using the %pK format specifier will be replaced with
Zeros. Debugging Note : &pK prints only Zeros as address. If you need
actual address information, write 0 to kptr_restrict.

echo 0 > /proc/sys/kernel/kptr_restrict

[Found by poking around in a random vendor kernel tree, it would be nice
if someone would actually send these types of patches upstream - gkh]

Signed-off-by: Vamsi Krishna Samavedam <vskrishn@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/devio.c |    4 ++--
 drivers/usb/core/hcd.c   |    4 ++--
 drivers/usb/core/urb.c   |    2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -373,11 +373,11 @@ static void snoop_urb(struct usb_device
 
 	if (userurb) {		/* Async */
 		if (when == SUBMIT)
-			dev_info(&udev->dev, "userurb %p, ep%d %s-%s, "
+			dev_info(&udev->dev, "userurb %pK, ep%d %s-%s, "
 					"length %u\n",
 					userurb, ep, t, d, length);
 		else
-			dev_info(&udev->dev, "userurb %p, ep%d %s-%s, "
+			dev_info(&udev->dev, "userurb %pK, ep%d %s-%s, "
 					"actual_length %u status %d\n",
 					userurb, ep, t, d, length,
 					timeout_or_status);
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1642,7 +1642,7 @@ int usb_hcd_unlink_urb (struct urb *urb,
 		if (retval == 0)
 			retval = -EINPROGRESS;
 		else if (retval != -EIDRM && retval != -EBUSY)
-			dev_dbg(&udev->dev, "hcd_unlink_urb %p fail %d\n",
+			dev_dbg(&udev->dev, "hcd_unlink_urb %pK fail %d\n",
 					urb, retval);
 		usb_put_dev(udev);
 	}
@@ -1809,7 +1809,7 @@ rescan:
 		/* kick hcd */
 		unlink1(hcd, urb, -ESHUTDOWN);
 		dev_dbg (hcd->self.controller,
-			"shutdown urb %p ep%d%s%s\n",
+			"shutdown urb %pK ep%d%s%s\n",
 			urb, usb_endpoint_num(&ep->desc),
 			is_in ? "in" : "out",
 			({	char *s;
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -336,7 +336,7 @@ int usb_submit_urb(struct urb *urb, gfp_
 	if (!urb || !urb->complete)
 		return -EINVAL;
 	if (urb->hcpriv) {
-		WARN_ONCE(1, "URB %p submitted while active\n", urb);
+		WARN_ONCE(1, "URB %pK submitted while active\n", urb);
 		return -EBUSY;
 	}
 

[PATCH 3.18 05/59] dm btree: fix for dm_btree_find_lowest_key()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vinothkumar Raja <vinraja@cs.stonybrook.edu>

commit 7d1fedb6e96a960aa91e4ff70714c3fb09195a5a upstream.

dm_btree_find_lowest_key() is giving incorrect results.  find_key()
traverses the btree correctly for finding the highest key, but there is
an error in the way it traverses the btree for retrieving the lowest
key.  dm_btree_find_lowest_key() fetches the first key of the rightmost
block of the btree instead of fetching the first key from the leftmost
block.

Fix this by conditionally passing the correct parameter to value64()
based on the @find_highest flag.

Signed-off-by: Erez Zadok <ezk@fsl.cs.sunysb.edu>
Signed-off-by: Vinothkumar Raja <vinraja@cs.stonybrook.edu>
Signed-off-by: Nidhi Panpalia <npanpalia@cs.stonybrook.edu>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/persistent-data/dm-btree.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/md/persistent-data/dm-btree.c
+++ b/drivers/md/persistent-data/dm-btree.c
@@ -788,8 +788,12 @@ static int find_key(struct ro_spine *s,
 		else
 			*result_key = le64_to_cpu(ro_node(s)->keys[0]);
 
-		if (next_block || flags & INTERNAL_NODE)
-			block = value64(ro_node(s), i);
+		if (next_block || flags & INTERNAL_NODE) {
+			if (find_highest)
+				block = value64(ro_node(s), i);
+			else
+				block = value64(ro_node(s), 0);
+		}
 
 	} while (flags & INTERNAL_NODE);
 

[PATCH 3.18 06/59] dm bufio: avoid a possible ABBA deadlock

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <mpatocka@redhat.com>

commit 1b0fb5a5b2dc0dddcfa575060441a7176ba7ac37 upstream.

__get_memory_limit() tests if dm_bufio_cache_size changed and calls
__cache_size_refresh() if it did.  It takes dm_bufio_clients_lock while
it already holds the client lock.  However, lock ordering is violated
because in cleanup_old_buffers() dm_bufio_clients_lock is taken before
the client lock.

This results in a possible deadlock and lockdep engine warning.

Fix this deadlock by changing mutex_lock() to mutex_trylock().  If the
lock can't be taken, it will be re-checked next time when a new buffer
is allocated.

Also add "unlikely" to the if condition, so that the optimizer assumes
that the condition is false.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-bufio.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/drivers/md/dm-bufio.c
+++ b/drivers/md/dm-bufio.c
@@ -862,10 +862,11 @@ static void __get_memory_limit(struct dm
 {
 	unsigned long buffers;
 
-	if (ACCESS_ONCE(dm_bufio_cache_size) != dm_bufio_cache_size_latch) {
-		mutex_lock(&dm_bufio_clients_lock);
-		__cache_size_refresh();
-		mutex_unlock(&dm_bufio_clients_lock);
+	if (unlikely(ACCESS_ONCE(dm_bufio_cache_size) != dm_bufio_cache_size_latch)) {
+		if (mutex_trylock(&dm_bufio_clients_lock)) {
+			__cache_size_refresh();
+			mutex_unlock(&dm_bufio_clients_lock);
+		}
 	}
 
 	buffers = dm_bufio_cache_size_per_client >>

[PATCH 3.18 07/59] dm thin metadata: call precommit before saving the roots

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joe Thornber <ejt@redhat.com>

commit 91bcdb92d39711d1adb40c26b653b7978d93eb98 upstream.

These calls were the wrong way round in __write_initial_superblock.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-thin-metadata.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/md/dm-thin-metadata.c
+++ b/drivers/md/dm-thin-metadata.c
@@ -484,11 +484,11 @@ static int __write_initial_superblock(st
 	if (r < 0)
 		return r;
 
-	r = save_sm_roots(pmd);
+	r = dm_tm_pre_commit(pmd->tm);
 	if (r < 0)
 		return r;
 
-	r = dm_tm_pre_commit(pmd->tm);
+	r = save_sm_roots(pmd);
 	if (r < 0)
 		return r;
 

[PATCH 3.18 08/59] dm space map disk: fix some book keeping in the disk space map

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joe Thornber <ejt@redhat.com>

commit 0377a07c7a035e0d033cd8b29f0cb15244c0916a upstream.

When decrementing the reference count for a block, the free count wasn't
being updated if the reference count went to zero.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/persistent-data/dm-space-map-disk.c |   15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

--- a/drivers/md/persistent-data/dm-space-map-disk.c
+++ b/drivers/md/persistent-data/dm-space-map-disk.c
@@ -140,10 +140,23 @@ static int sm_disk_inc_block(struct dm_s
 
 static int sm_disk_dec_block(struct dm_space_map *sm, dm_block_t b)
 {
+	int r;
+	uint32_t old_count;
 	enum allocation_event ev;
 	struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
 
-	return sm_ll_dec(&smd->ll, b, &ev);
+	r = sm_ll_dec(&smd->ll, b, &ev);
+	if (!r && (ev == SM_FREE)) {
+		/*
+		 * It's only free if it's also free in the last
+		 * transaction.
+		 */
+		r = sm_ll_lookup(&smd->old_ll, b, &old_count);
+		if (!r && !old_count)
+			smd->nr_allocated_this_transaction--;
+	}
+
+	return r;
 }
 
 static int sm_disk_new_block(struct dm_space_map *sm, dm_block_t *b)

[PATCH 3.18 09/59] mwifiex: pcie: fix cmd_buf use-after-free in remove/reset

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brian Norris <briannorris@chromium.org>

commit 3c8cb9ad032d737b874e402c59eb51e3c991a144 upstream.

Command buffers (skb's) are allocated by the main driver, and freed upon
the last use. That last use is often in mwifiex_free_cmd_buffer(). In
the meantime, if the command buffer gets used by the PCI driver, we map
it as DMA-able, and store the mapping information in the 'cb' memory.

However, if a command was in-flight when resetting the device (and
therefore was still mapped), we don't get a chance to unmap this memory
until after the core has cleaned up its command handling.

Let's keep a refcount within the PCI driver, so we ensure the memory
only gets freed after we've finished unmapping it.

Noticed by KASAN when forcing a reset via:

  echo 1 > /sys/bus/pci/.../reset

The same code path can presumably be exercised in remove() and
shutdown().

[  205.390377] mwifiex_pcie 0000:01:00.0: info: shutdown mwifiex...
[  205.400393] ==================================================================
[  205.407719] BUG: KASAN: use-after-free in mwifiex_unmap_pci_memory.isra.14+0x4c/0x100 [mwifiex_pcie] at addr ffffffc0ad471b28
[  205.419040] Read of size 16 by task bash/1913
[  205.423421] =============================================================================
[  205.431625] BUG skbuff_head_cache (Tainted: G    B          ): kasan: bad access detected
[  205.439815] -----------------------------------------------------------------------------
[  205.439815]
[  205.449534] INFO: Allocated in __build_skb+0x48/0x114 age=1311 cpu=4 pid=1913
[  205.456709] 	alloc_debug_processing+0x124/0x178
[  205.461282] 	___slab_alloc.constprop.58+0x528/0x608
[  205.466196] 	__slab_alloc.isra.54.constprop.57+0x44/0x54
[  205.471542] 	kmem_cache_alloc+0xcc/0x278
[  205.475497] 	__build_skb+0x48/0x114
[  205.479019] 	__netdev_alloc_skb+0xe0/0x170
[  205.483244] 	mwifiex_alloc_cmd_buffer+0x68/0xdc [mwifiex]
[  205.488759] 	mwifiex_init_fw+0x40/0x6cc [mwifiex]
[  205.493584] 	_mwifiex_fw_dpc+0x158/0x520 [mwifiex]
[  205.498491] 	mwifiex_reinit_sw+0x2c4/0x398 [mwifiex]
[  205.503510] 	mwifiex_pcie_reset_notify+0x114/0x15c [mwifiex_pcie]
[  205.509643] 	pci_reset_notify+0x5c/0x6c
[  205.513519] 	pci_reset_function+0x6c/0x7c
[  205.517567] 	reset_store+0x68/0x98
[  205.521003] 	dev_attr_store+0x54/0x60
[  205.524705] 	sysfs_kf_write+0x9c/0xb0
[  205.528413] INFO: Freed in __kfree_skb+0xb0/0xbc age=131 cpu=4 pid=1913
[  205.535064] 	free_debug_processing+0x264/0x370
[  205.539550] 	__slab_free+0x84/0x40c
[  205.543075] 	kmem_cache_free+0x1c8/0x2a0
[  205.547030] 	__kfree_skb+0xb0/0xbc
[  205.550465] 	consume_skb+0x164/0x178
[  205.554079] 	__dev_kfree_skb_any+0x58/0x64
[  205.558304] 	mwifiex_free_cmd_buffer+0xa0/0x158 [mwifiex]
[  205.563817] 	mwifiex_shutdown_drv+0x578/0x5c4 [mwifiex]
[  205.569164] 	mwifiex_shutdown_sw+0x178/0x310 [mwifiex]
[  205.574353] 	mwifiex_pcie_reset_notify+0xd4/0x15c [mwifiex_pcie]
[  205.580398] 	pci_reset_notify+0x5c/0x6c
[  205.584274] 	pci_dev_save_and_disable+0x24/0x6c
[  205.588837] 	pci_reset_function+0x30/0x7c
[  205.592885] 	reset_store+0x68/0x98
[  205.596324] 	dev_attr_store+0x54/0x60
[  205.600017] 	sysfs_kf_write+0x9c/0xb0
...
[  205.800488] Call trace:
[  205.802980] [<ffffffc00020a69c>] dump_backtrace+0x0/0x190
[  205.808415] [<ffffffc00020a96c>] show_stack+0x20/0x28
[  205.813506] [<ffffffc0005d020c>] dump_stack+0xa4/0xcc
[  205.818598] [<ffffffc0003be44c>] print_trailer+0x158/0x168
[  205.824120] [<ffffffc0003be5f0>] object_err+0x4c/0x5c
[  205.829210] [<ffffffc0003c45bc>] kasan_report+0x334/0x500
[  205.834641] [<ffffffc0003c3994>] check_memory_region+0x20/0x14c
[  205.840593] [<ffffffc0003c3b14>] __asan_loadN+0x14/0x1c
[  205.845879] [<ffffffbffc46171c>] mwifiex_unmap_pci_memory.isra.14+0x4c/0x100 [mwifiex_pcie]
[  205.854282] [<ffffffbffc461864>] mwifiex_pcie_delete_cmdrsp_buf+0x94/0xa8 [mwifiex_pcie]
[  205.862421] [<ffffffbffc462028>] mwifiex_pcie_free_buffers+0x11c/0x158 [mwifiex_pcie]
[  205.870302] [<ffffffbffc4620d4>] mwifiex_pcie_down_dev+0x70/0x80 [mwifiex_pcie]
[  205.877736] [<ffffffbffc1397a8>] mwifiex_shutdown_sw+0x190/0x310 [mwifiex]
[  205.884658] [<ffffffbffc4606b4>] mwifiex_pcie_reset_notify+0xd4/0x15c [mwifiex_pcie]
[  205.892446] [<ffffffc000635f54>] pci_reset_notify+0x5c/0x6c
[  205.898048] [<ffffffc00063a044>] pci_dev_save_and_disable+0x24/0x6c
[  205.904350] [<ffffffc00063cf0c>] pci_reset_function+0x30/0x7c
[  205.910134] [<ffffffc000641118>] reset_store+0x68/0x98
[  205.915312] [<ffffffc000771588>] dev_attr_store+0x54/0x60
[  205.920750] [<ffffffc00046f53c>] sysfs_kf_write+0x9c/0xb0
[  205.926182] [<ffffffc00046dfb0>] kernfs_fop_write+0x184/0x1f8
[  205.931963] [<ffffffc0003d64f4>] __vfs_write+0x6c/0x17c
[  205.937221] [<ffffffc0003d7164>] vfs_write+0xf0/0x1c4
[  205.942310] [<ffffffc0003d7da0>] SyS_write+0x78/0xd8
[  205.947312] [<ffffffc000204634>] el0_svc_naked+0x24/0x28
...
[  205.998268] ==================================================================

This bug has been around in different forms for a while. It was sort of
noticed in commit 955ab095c51a ("mwifiex: Do not kfree cmd buf while
unregistering PCIe"), but it just fixed the double-free, without
acknowledging the potential for use-after-free.

Fixes: fc3314609047 ("mwifiex: use pci_alloc/free_consistent APIs for PCIe")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/mwifiex/pcie.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/net/wireless/mwifiex/pcie.c
+++ b/drivers/net/wireless/mwifiex/pcie.c
@@ -930,6 +930,7 @@ static int mwifiex_pcie_delete_cmdrsp_bu
 	if (card && card->cmd_buf) {
 		mwifiex_unmap_pci_memory(adapter, card->cmd_buf,
 					 PCI_DMA_TODEVICE);
+		dev_kfree_skb_any(card->cmd_buf);
 	}
 	return 0;
 }
@@ -1485,6 +1486,11 @@ mwifiex_pcie_send_cmd(struct mwifiex_ada
 		return -1;
 
 	card->cmd_buf = skb;
+	/*
+	 * Need to keep a reference, since core driver might free up this
+	 * buffer before we've unmapped it.
+	 */
+	skb_get(skb);
 
 	/* To send a command, the driver will:
 		1. Write the 64bit physical address of the data buffer to
@@ -1581,6 +1587,7 @@ static int mwifiex_pcie_process_cmd_comp
 	if (card->cmd_buf) {
 		mwifiex_unmap_pci_memory(adapter, card->cmd_buf,
 					 PCI_DMA_TODEVICE);
+		dev_kfree_skb_any(card->cmd_buf);
 		card->cmd_buf = NULL;
 	}
 

[PATCH 3.18 11/59] regulator: tps65023: Fix inverted core enable logic.

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Cochran <rcochran@linutronix.de>

commit c90722b54a4f5e21ac59301ed9a6dbaa439bdb16 upstream.

Commit 43530b69d758328d3ffe6ab98fd640463e8e3667 ("regulator: Use
regmap_read/write(), regmap_update_bits functions directly") intended
to replace working inline helper functions with standard regmap
calls.  However, it also inverted the set/clear logic of the "CORE ADJ
Allowed" bit.  That patch was clearly never tested, since without that
bit cleared, the core VDCDC1 voltage output does not react to I2C
configuration changes.

This patch fixes the issue by clearing the bit as in the original,
correct implementation.  Note for stable back porting that, due to
subsequent driver churn, this patch will not apply on every kernel
version.

Fixes: 43530b69d758 ("regulator: Use regmap_read/write(), regmap_update_bits functions directly")
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/regulator/tps65023-regulator.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/regulator/tps65023-regulator.c
+++ b/drivers/regulator/tps65023-regulator.c
@@ -290,8 +290,7 @@ static int tps_65023_probe(struct i2c_cl
 
 	/* Enable setting output voltage by I2C */
 	regmap_update_bits(tps->regmap, TPS65023_REG_CON_CTRL2,
-					TPS65023_REG_CTRL2_CORE_ADJ,
-					TPS65023_REG_CTRL2_CORE_ADJ);
+			   TPS65023_REG_CTRL2_CORE_ADJ, 0);
 
 	return 0;
 }

[PATCH 3.18 12/59] ath9k_htc: fix NULL-deref at probe

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit ebeb36670ecac36c179b5fb5d5c88ff03ba191ec upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.

Fixes: 36bcce430657 ("ath9k_htc: Handle storage devices")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/hif_usb.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -1143,6 +1143,9 @@ static int send_eject_command(struct usb
 	u8 bulk_out_ep;
 	int r;
 
+	if (iface_desc->desc.bNumEndpoints < 2)
+		return -ENODEV;
+
 	/* Find bulk out endpoint */
 	for (r = 1; r >= 0; r--) {
 		endpoint = &iface_desc->endpoint[r].desc;

[PATCH 3.18 13/59] cdc-acm: fix possible invalid access when processing notification

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tobias Herzog <t-herzog@gmx.de>

commit 1bb9914e1730417d530de9ed37e59efdc647146b upstream.

Notifications may only be 8 bytes long. Accessing the 9th and
10th byte of unimplemented/unknown notifications may be insecure.
Also check the length of known notifications before accessing anything
behind the 8th byte.

Signed-off-by: Tobias Herzog <t-herzog@gmx.de>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/cdc-acm.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -315,6 +315,12 @@ static void acm_ctrl_irq(struct urb *urb
 		break;
 
 	case USB_CDC_NOTIFY_SERIAL_STATE:
+		if (le16_to_cpu(dr->wLength) != 2) {
+			dev_dbg(&acm->control->dev,
+				"%s - malformed serial state\n", __func__);
+			break;
+		}
+
 		newctrl = get_unaligned_le16(data);
 
 		if (!acm->clocal && (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) {
@@ -351,11 +357,10 @@ static void acm_ctrl_irq(struct urb *urb
 
 	default:
 		dev_dbg(&acm->control->dev,
-			"%s - unknown notification %d received: index %d "
-			"len %d data0 %d data1 %d\n",
+			"%s - unknown notification %d received: index %d len %d\n",
 			__func__,
-			dr->bNotificationType, dr->wIndex,
-			dr->wLength, data[0], data[1]);
+			dr->bNotificationType, dr->wIndex, dr->wLength);
+
 		break;
 	}
 exit:

[PATCH 3.18 14/59] of: fix sparse warning in of_pci_range_parser_one

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rob Herring <robh@kernel.org>

commit eb3100365791b06242b8bb5c3c2854ba41dabfbc upstream.

sparse gives the following warning for 'pci_space':

../drivers/of/address.c:266:26: warning: incorrect type in assignment (different base types)
../drivers/of/address.c:266:26:    expected unsigned int [unsigned] [usertype] pci_space
../drivers/of/address.c:266:26:    got restricted __be32 const [usertype] <noident>

It appears that pci_space is only ever accessed on powerpc, so the endian
swap is often not needed.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/of/address.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -260,7 +260,7 @@ struct of_pci_range *of_pci_range_parser
 	if (!parser->range || parser->range + parser->np > parser->end)
 		return NULL;
 
-	range->pci_space = parser->range[0];
+	range->pci_space = be32_to_cpup(parser->range);
 	range->flags = of_bus_pci_get_flags(parser->range);
 	range->pci_addr = of_read_number(parser->range + 1, ns);
 	range->cpu_addr = of_translate_address(parser->node,

[PATCH 3.18 15/59] of: fdt: add missing allocation-failure check

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 49e67dd17649b60b4d54966e18ec9c80198227f0 upstream.

The memory allocator passed to __unflatten_device_tree() (e.g. a wrapped
kzalloc) can fail so add the missing sanity check to avoid dereferencing
a NULL pointer.

Fixes: fe14042358fa ("of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/of/fdt.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -380,6 +380,9 @@ static void __unflatten_device_tree(void
 
 	/* Allocate memory for the expanded device tree */
 	mem = dt_alloc(size + 4, __alignof__(struct device_node));
+	if (!mem)
+		return NULL;
+
 	memset(mem, 0, size);
 
 	*(__be32 *)(mem + size) = cpu_to_be32(0xdeadbeef);

[PATCH 3.18 16/59] iio: dac: ad7303: fix channel description

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pavel Roskin <plroskin@gmail.com>

commit ce420fd4251809b4c3119b3b20c8b13bd8eba150 upstream.

realbits, storagebits and shift should be numbers, not ASCII characters.

Signed-off-by: Pavel Roskin <plroskin@gmail.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/dac/ad7303.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/iio/dac/ad7303.c
+++ b/drivers/iio/dac/ad7303.c
@@ -184,9 +184,9 @@ static const struct iio_chan_spec_ext_in
 	.address = (chan),					\
 	.scan_type = {						\
 		.sign = 'u',					\
-		.realbits = '8',				\
-		.storagebits = '8',				\
-		.shift = '0',					\
+		.realbits = 8,					\
+		.storagebits = 8,				\
+		.shift = 0,					\
 	},							\
 	.ext_info = ad7303_ext_info,				\
 }

[PATCH 3.18 17/59] pid_ns: Sleep in TASK_INTERRUPTIBLE in zap_pid_ns_processes

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric W. Biederman <ebiederm@xmission.com>

commit b9a985db98961ae1ba0be169f19df1c567e4ffe0 upstream.

The code can potentially sleep for an indefinite amount of time in
zap_pid_ns_processes triggering the hung task timeout, and increasing
the system average.  This is undesirable.  Sleep with a task state of
TASK_INTERRUPTIBLE instead of TASK_UNINTERRUPTIBLE to remove these
undesirable side effects.

Apparently under heavy load this has been allowing Chrome to trigger
the hung time task timeout error and cause ChromeOS to reboot.

Reported-by: Vovo Yang <vovoy@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 6347e9009104 ("pidns: guarantee that the pidns init will be the last pidns process reaped")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/pid_namespace.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/pid_namespace.c
+++ b/kernel/pid_namespace.c
@@ -234,7 +234,7 @@ void zap_pid_ns_processes(struct pid_nam
 	 * Make sure they all go away, see free_pid().
 	 */
 	for (;;) {
-		set_current_state(TASK_UNINTERRUPTIBLE);
+		set_current_state(TASK_INTERRUPTIBLE);
 		if (pid_ns->nr_hashed == init_pids)
 			break;
 		schedule();

[PATCH 3.18 18/59] USB: serial: ftdi_sio: fix setting latency for unprivileged users

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anthony Mallet <anthony.mallet@laas.fr>

commit bb246681b3ed0967489a7401ad528c1aaa1a4c2e upstream.

Commit 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY
flag") enables unprivileged users to set the FTDI latency timer,
but there was a logic flaw that skipped sending the corresponding
USB control message to the device.

Specifically, the device latency timer would not be updated until next
open, something which was later also inadvertently broken by commit
c19db4c9e49a ("USB: ftdi_sio: set device latency timeout at port
probe").

A recent commit c6dce2626606 ("USB: serial: ftdi_sio: fix extreme
low-latency setting") disabled the low-latency mode by default so we now
need this fix to allow unprivileged users to again enable it.

Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr>
[johan: amend commit message]
Fixes: 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag")
Fixes: c19db4c9e49a ("USB: ftdi_sio: set device latency timeout at port probe").
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ftdi_sio.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1506,9 +1506,9 @@ static int set_serial_info(struct tty_st
 					(new_serial.flags & ASYNC_FLAGS));
 	priv->custom_divisor = new_serial.custom_divisor;
 
+check_and_exit:
 	write_latency_timer(port);
 
-check_and_exit:
 	if ((old_priv.flags & ASYNC_SPD_MASK) !=
 	     (priv->flags & ASYNC_SPD_MASK)) {
 		if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)

[PATCH 3.18 19/59] USB: serial: ftdi_sio: add Olimex ARM-USB-TINY(H) PIDs

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrey Korolyov <andrey@xdel.ru>

commit 5f63424ab7daac840df2b12dd5bcc5b38d50f779 upstream.

This patch adds support for recognition of ARM-USB-TINY(H) devices which
are almost identical to ARM-USB-OCD(H) but lacking separate barrel jack
and serial console.

By suggestion from Johan Hovold it is possible to replace
ftdi_jtag_quirk with a bit more generic construction. Since all
Olimex-ARM debuggers has exactly two ports, we could safely always use
only second port within the debugger family.

Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ftdi_sio.c     |    8 ++++----
 drivers/usb/serial/ftdi_sio_ids.h |    2 ++
 2 files changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -809,10 +809,10 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) },
 	{ USB_DEVICE(FTDI_VID, CYBER_CORTEX_AV_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_H_PID, 1) },
 	{ USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -876,6 +876,8 @@
 /* Olimex */
 #define OLIMEX_VID			0x15BA
 #define OLIMEX_ARM_USB_OCD_PID		0x0003
+#define OLIMEX_ARM_USB_TINY_PID	0x0004
+#define OLIMEX_ARM_USB_TINY_H_PID	0x002a
 #define OLIMEX_ARM_USB_OCD_H_PID	0x002b
 
 /*

[PATCH 3.18 20/59] usb: host: xhci-plat: propagate return value of platform_get_irq()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

commit 4b148d5144d64ee135b8924350cb0b3a7fd21150 upstream.

platform_get_irq() returns an error code, but the xhci-plat driver
ignores it and always returns -ENODEV. This is not correct, and
prevents -EPROBE_DEFER from being propagated properly.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-plat.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -81,7 +81,7 @@ static int xhci_plat_probe(struct platfo
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
-		return -ENODEV;
+		return irq;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)

[PATCH 3.18 21/59] usb: host: xhci-mem: allocate zeroed Scratchpad Buffer

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Chen <peter.chen@nxp.com>

commit 7480d912d549f414e0ce39331870899e89a5598c upstream.

According to xHCI ch4.20 Scratchpad Buffers, the Scratchpad
Buffer needs to be zeroed.

	...
	The following operations take place to allocate
       	Scratchpad Buffers to the xHC:
	...
		b. Software clears the Scratchpad Buffer to '0'

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-mem.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1676,7 +1676,7 @@ static int scratchpad_alloc(struct xhci_
 	xhci->dcbaa->dev_context_ptrs[0] = cpu_to_le64(xhci->scratchpad->sp_dma);
 	for (i = 0; i < num_sp; i++) {
 		dma_addr_t dma;
-		void *buf = dma_alloc_coherent(dev, xhci->page_size, &dma,
+		void *buf = dma_zalloc_coherent(dev, xhci->page_size, &dma,
 				flags);
 		if (!buf)
 			goto fail_sp5;

[PATCH 3.18 22/59] net: irda: irda-usb: fix firmware name on big-endian hosts

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 75cf067953d5ee543b3bda90bbfcbee5e1f94ae8 upstream.

Add missing endianness conversion when using the USB device-descriptor
bcdDevice field to construct a firmware file name.

Fixes: 8ef80aef118e ("[IRDA]: irda-usb.c: STIR421x cleanups")
Cc: Nick Fedchik <nfedchik@atlantic-link.com.ua>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/irda/irda-usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -1082,7 +1082,7 @@ static int stir421x_patch_device(struct
          * are "42101001.sb" or "42101002.sb"
          */
         sprintf(stir421x_fw_name, "4210%4X.sb",
-                self->usbdev->descriptor.bcdDevice);
+		le16_to_cpu(self->usbdev->descriptor.bcdDevice));
         ret = request_firmware(&fw, stir421x_fw_name, &self->usbdev->dev);
         if (ret < 0)
                 return ret;

[PATCH 3.18 23/59] [media] usbvision: fix NULL-deref at probe

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit eacb975b48272f54532b62f515a3cf7eefa35123 upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.

Fixes: 2a9f8b5d25be ("V4L/DVB (5206): Usbvision: set alternate interface
modification")

Cc: Thierry MERLE <thierry.merle@free.fr>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/usbvision/usbvision-video.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/media/usb/usbvision/usbvision-video.c
+++ b/drivers/media/usb/usbvision/usbvision-video.c
@@ -1583,7 +1583,14 @@ static int usbvision_probe(struct usb_in
 	}
 
 	for (i = 0; i < usbvision->num_alt; i++) {
-		u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[1].desc.
+		u16 tmp;
+
+		if (uif->altsetting[i].desc.bNumEndpoints < 2) {
+			usbvision_release(usbvision);
+			return -ENODEV;
+		}
+
+		tmp = le16_to_cpu(uif->altsetting[i].endpoint[1].desc.
 				      wMaxPacketSize);
 		usbvision->alt_max_pkt_size[i] =
 			(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);

[PATCH 3.18 24/59] [media] mceusb: fix NULL-deref at probe

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 03eb2a557ed552e920a0942b774aaf931596eec1 upstream.

Make sure to check for the required out endpoint to avoid dereferencing
a NULL-pointer in mce_request_packet should a malicious device lack such
an endpoint. Note that this path is hit during probe.

Fixes: 66e89522aff7 ("V4L/DVB: IR: add mceusb IR receiver driver")

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/rc/mceusb.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -1321,8 +1321,8 @@ static int mceusb_dev_probe(struct usb_i
 			}
 		}
 	}
-	if (ep_in == NULL) {
-		dev_dbg(&intf->dev, "inbound and/or endpoint not found");
+	if (!ep_in || !ep_out) {
+		dev_dbg(&intf->dev, "required endpoints not found\n");
 		return -ENODEV;
 	}
 

[PATCH 3.18 25/59] [media] ttusb2: limit messages to buffer size

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alyssa Milburn <amilburn@zall.org>

commit a12b8ab8c5ff7ccd7b107a564743507c850a441d upstream.

Otherwise ttusb2_i2c_xfer can read or write beyond the end of static and
heap buffers.

Signed-off-by: Alyssa Milburn <amilburn@zall.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/dvb-usb/ttusb2.c |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

--- a/drivers/media/usb/dvb-usb/ttusb2.c
+++ b/drivers/media/usb/dvb-usb/ttusb2.c
@@ -78,6 +78,9 @@ static int ttusb2_msg(struct dvb_usb_dev
 	u8 *s, *r = NULL;
 	int ret = 0;
 
+	if (4 + rlen > 64)
+		return -EIO;
+
 	s = kzalloc(wlen+4, GFP_KERNEL);
 	if (!s)
 		return -ENOMEM;
@@ -381,6 +384,22 @@ static int ttusb2_i2c_xfer(struct i2c_ad
 		write_read = i+1 < num && (msg[i+1].flags & I2C_M_RD);
 		read = msg[i].flags & I2C_M_RD;
 
+		if (3 + msg[i].len > sizeof(obuf)) {
+			err("i2c wr len=%d too high", msg[i].len);
+			break;
+		}
+		if (write_read) {
+			if (3 + msg[i+1].len > sizeof(ibuf)) {
+				err("i2c rd len=%d too high", msg[i+1].len);
+				break;
+			}
+		} else if (read) {
+			if (3 + msg[i].len > sizeof(ibuf)) {
+				err("i2c rd len=%d too high", msg[i].len);
+				break;
+			}
+		}
+
 		obuf[0] = (msg[i].addr << 1) | (write_read | read);
 		if (read)
 			obuf[1] = 0;

[PATCH 3.18 26/59] usb: musb: tusb6010_omap: Do not reset the other directions packet size

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

commit 6df2b42f7c040d57d9ecb67244e04e905ab87ac6 upstream.

We have one register for each EP to set the maximum packet size for both
TX and RX.
If for example an RX programming would happen before the previous TX
transfer finishes we would reset the TX packet side.

To fix this issue, only modify the TX or RX part of the register.

Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/musb/tusb6010_omap.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -220,6 +220,7 @@ static int tusb_omap_dma_program(struct
 	u32				dma_remaining;
 	int				src_burst, dst_burst;
 	u16				csr;
+	u32				psize;
 	int				ch;
 	s8				dmareq;
 	s8				sync_dev;
@@ -391,15 +392,19 @@ static int tusb_omap_dma_program(struct
 
 	if (chdat->tx) {
 		/* Send transfer_packet_sz packets at a time */
-		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
-			chdat->transfer_packet_sz);
+		psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
+		psize &= ~0x7ff;
+		psize |= chdat->transfer_packet_sz;
+		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
 
 		musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
 			TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
 	} else {
 		/* Receive transfer_packet_sz packets at a time */
-		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
-			chdat->transfer_packet_sz << 16);
+		psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
+		psize &= ~(0x7ff << 16);
+		psize |= (chdat->transfer_packet_sz << 16);
+		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
 
 		musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
 			TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));

[PATCH 3.18 27/59] USB: iowarrior: fix info ioctl on big-endian hosts

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit dd5ca753fa92fb736b1395db892bd29f78e6d408 upstream.

Drop erroneous le16_to_cpu when returning the USB device speed which is
already in host byte order.

Found using sparse:

	warning: cast to restricted __le16

Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/misc/iowarrior.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -557,7 +557,7 @@ static long iowarrior_ioctl(struct file
 			info.revision = le16_to_cpu(dev->udev->descriptor.bcdDevice);
 
 			/* 0==UNKNOWN, 1==LOW(usb1.1) ,2=FULL(usb1.1), 3=HIGH(usb2.0) */
-			info.speed = le16_to_cpu(dev->udev->speed);
+			info.speed = dev->udev->speed;
 			info.if_num = dev->interface->cur_altsetting->desc.bInterfaceNumber;
 			info.report_size = dev->report_size;
 

[PATCH 3.18 28/59] usb: serial: option: add Telit ME910 support

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniele Palmas <dnlplm@gmail.com>

commit 40dd46048c155b8f0683f468c950a1c107f77a7c upstream.

This patch adds support for Telit ME910 PID 0x1100.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -275,6 +275,7 @@ static void option_instat_callback(struc
 #define TELIT_PRODUCT_LE922_USBCFG0		0x1042
 #define TELIT_PRODUCT_LE922_USBCFG3		0x1043
 #define TELIT_PRODUCT_LE922_USBCFG5		0x1045
+#define TELIT_PRODUCT_ME910			0x1100
 #define TELIT_PRODUCT_LE920			0x1200
 #define TELIT_PRODUCT_LE910			0x1201
 #define TELIT_PRODUCT_LE910_USBCFG4		0x1206
@@ -637,6 +638,11 @@ static const struct option_blacklist_inf
 	.reserved = BIT(5) | BIT(6),
 };
 
+static const struct option_blacklist_info telit_me910_blacklist = {
+	.sendsetup = BIT(0),
+	.reserved = BIT(1) | BIT(3),
+};
+
 static const struct option_blacklist_info telit_le910_blacklist = {
 	.sendsetup = BIT(0),
 	.reserved = BIT(1) | BIT(2),
@@ -1233,6 +1239,8 @@ static const struct usb_device_id option
 		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff),
 		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
+		.driver_info = (kernel_ulong_t)&telit_me910_blacklist },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
 		.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),

[PATCH 3.18 30/59] USB: serial: mct_u232: fix big-endian baud-rate handling

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 26cede343656c0bc2c33cdc783771282405c7fb2 upstream.

Drop erroneous cpu_to_le32 when setting the baud rate, something which
corrupted the divisor on big-endian hosts.

Found using sparse:

	warning: incorrect type in argument 1 (different base types)
	    expected unsigned int [unsigned] [usertype] val
	    got restricted __le32 [usertype] <noident>

Fixes: af2ac1a091bc ("USB: serial mct_usb232: move DMA buffers to heap")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-By: Pete Zaitcev <zaitcev@yahoo.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/mct_u232.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -189,7 +189,7 @@ static int mct_u232_set_baud_rate(struct
 		return -ENOMEM;
 
 	divisor = mct_u232_calculate_baud_rate(serial, value, &speed);
-	put_unaligned_le32(cpu_to_le32(divisor), buf);
+	put_unaligned_le32(divisor, buf);
 	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 				MCT_U232_SET_BAUD_RATE_REQUEST,
 				MCT_U232_SET_REQUEST_TYPE,

[PATCH 3.18 31/59] USB: serial: io_ti: fix div-by-zero in set_termios

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 6aeb75e6adfaed16e58780309613a578fe1ee90b upstream.

Fix a division-by-zero in set_termios when debugging is enabled and a
high-enough speed has been requested so that the divisor value becomes
zero.

Instead of just fixing the offending debug statement, cap the baud rate
at the base as a zero divisor value also appears to crash the firmware.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/io_ti.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2210,8 +2210,11 @@ static void change_port_settings(struct
 	if (!baud) {
 		/* pick a default, any default... */
 		baud = 9600;
-	} else
+	} else {
+		/* Avoid a zero divisor. */
+		baud = min(baud, 461550);
 		tty_encode_baud_rate(tty, baud, baud);
+	}
 
 	edge_port->baud_rate = baud;
 	config->wBaudRate = (__u16)((461550L + baud/2) / baud);

[PATCH 3.18 32/59] USB: hub: fix SS hub-descriptor handling

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 2c25a2c818023df64463aac3288a9f969491e507 upstream.

A SuperSpeed hub descriptor does not have any variable-length fields so
bail out when reading a short descriptor.

This avoids parsing and leaking two bytes of uninitialised slab data
through sysfs removable-attributes.

Fixes: dbe79bbe9dcb ("USB 3.0 Hub Changes")
Cc: John Youn <John.Youn@synopsys.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/hub.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -377,8 +377,12 @@ static int get_hub_descriptor(struct usb
 			USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
 			dtype << 8, 0, data, size,
 			USB_CTRL_GET_TIMEOUT);
-		if (ret >= (USB_DT_HUB_NONVAR_SIZE + 2))
+		if (hub_is_superspeed(hdev)) {
+			if (ret == size)
+				return ret;
+		} else if (ret >= (USB_DT_HUB_NONVAR_SIZE + 2)) {
 			return ret;
+		}
 	}
 	return -EINVAL;
 }
@@ -1331,7 +1335,7 @@ static int hub_configure(struct usb_hub
 
 	/* Request the entire hub descriptor.
 	 * hub->descriptor can handle USB_MAXCHILDREN ports,
-	 * but the hub can/will return fewer bytes here.
+	 * but a (non-SS) hub can/will return fewer bytes here.
 	 */
 	ret = get_hub_descriptor(hdev, hub->descriptor);
 	if (ret < 0) {

[PATCH 3.18 33/59] USB: hub: fix non-SS hub-descriptor handling

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit bec444cd1c94c48df409a35ad4e5b143c245c3f7 upstream.

Add missing sanity check on the non-SuperSpeed hub-descriptor length in
order to avoid parsing and leaking two bytes of uninitialised slab data
through sysfs removable-attributes (or a compound-device debug
statement).

Note that we only make sure that the DeviceRemovable field is always
present (and specifically ignore the unused PortPwrCtrlMask field) in
order to continue support any hubs with non-compliant descriptors. As a
further safeguard, the descriptor buffer is also cleared.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/hub.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -359,7 +359,8 @@ static void usb_set_lpm_parameters(struc
 }
 
 /* USB 2.0 spec Section 11.24.4.5 */
-static int get_hub_descriptor(struct usb_device *hdev, void *data)
+static int get_hub_descriptor(struct usb_device *hdev,
+		struct usb_hub_descriptor *desc)
 {
 	int i, ret, size;
 	unsigned dtype;
@@ -375,12 +376,16 @@ static int get_hub_descriptor(struct usb
 	for (i = 0; i < 3; i++) {
 		ret = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
 			USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
-			dtype << 8, 0, data, size,
+			dtype << 8, 0, desc, size,
 			USB_CTRL_GET_TIMEOUT);
 		if (hub_is_superspeed(hdev)) {
 			if (ret == size)
 				return ret;
-		} else if (ret >= (USB_DT_HUB_NONVAR_SIZE + 2)) {
+		} else if (ret >= USB_DT_HUB_NONVAR_SIZE + 2) {
+			/* Make sure we have the DeviceRemovable field. */
+			size = USB_DT_HUB_NONVAR_SIZE + desc->bNbrPorts / 8 + 1;
+			if (ret < size)
+				return -EMSGSIZE;
 			return ret;
 		}
 	}
@@ -1327,7 +1332,7 @@ static int hub_configure(struct usb_hub
 	}
 	mutex_init(&hub->status_mutex);
 
-	hub->descriptor = kmalloc(sizeof(*hub->descriptor), GFP_KERNEL);
+	hub->descriptor = kzalloc(sizeof(*hub->descriptor), GFP_KERNEL);
 	if (!hub->descriptor) {
 		ret = -ENOMEM;
 		goto fail;

[PATCH 3.18 34/59] tty: Prevent ldisc drivers from re-using stale tty fields

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Hurley <peter@hurleysoftware.com>

commit dd42bf1197144ede075a9d4793123f7689e164bc upstream.

Line discipline drivers may mistakenly misuse ldisc-related fields
when initializing. For example, a failure to initialize tty->receive_room
in the N_GIGASET_M101 line discipline was recently found and fixed [1].
Now, the N_X25 line discipline has been discovered accessing the previous
line discipline's already-freed private data [2].

Harden the ldisc interface against misuse by initializing revelant
tty fields before instancing the new line discipline.

[1]
    commit fd98e9419d8d622a4de91f76b306af6aa627aa9c
    Author: Tilman Schmidt <tilman@imap.cc>
    Date:   Tue Jul 14 00:37:13 2015 +0200

    isdn/gigaset: reset tty->receive_room when attaching ser_gigaset

[2] Report from Sasha Levin <sasha.levin@oracle.com>
    [  634.336761] ==================================================================
    [  634.338226] BUG: KASAN: use-after-free in x25_asy_open_tty+0x13d/0x490 at addr ffff8800a743efd0
    [  634.339558] Read of size 4 by task syzkaller_execu/8981
    [  634.340359] =============================================================================
    [  634.341598] BUG kmalloc-512 (Not tainted): kasan: bad access detected
    ...
    [  634.405018] Call Trace:
    [  634.405277] dump_stack (lib/dump_stack.c:52)
    [  634.405775] print_trailer (mm/slub.c:655)
    [  634.406361] object_err (mm/slub.c:662)
    [  634.406824] kasan_report_error (mm/kasan/report.c:138 mm/kasan/report.c:236)
    [  634.409581] __asan_report_load4_noabort (mm/kasan/report.c:279)
    [  634.411355] x25_asy_open_tty (drivers/net/wan/x25_asy.c:559 (discriminator 1))
    [  634.413997] tty_ldisc_open.isra.2 (drivers/tty/tty_ldisc.c:447)
    [  634.414549] tty_set_ldisc (drivers/tty/tty_ldisc.c:567)
    [  634.415057] tty_ioctl (drivers/tty/tty_io.c:2646 drivers/tty/tty_io.c:2879)
    [  634.423524] do_vfs_ioctl (fs/ioctl.c:43 fs/ioctl.c:607)
    [  634.427491] SyS_ioctl (fs/ioctl.c:622 fs/ioctl.c:613)
    [  634.427945] entry_SYSCALL_64_fastpath (arch/x86/entry/entry_64.S:188)

Cc: Tilman Schmidt <tilman@imap.cc>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/tty_ldisc.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -414,6 +414,10 @@ EXPORT_SYMBOL_GPL(tty_ldisc_flush);
  *	they are not on hot paths so a little discipline won't do
  *	any harm.
  *
+ *	The line discipline-related tty_struct fields are reset to
+ *	prevent the ldisc driver from re-using stale information for
+ *	the new ldisc instance.
+ *
  *	Locking: takes termios_rwsem
  */
 
@@ -422,6 +426,9 @@ static void tty_set_termios_ldisc(struct
 	down_write(&tty->termios_rwsem);
 	tty->termios.c_line = num;
 	up_write(&tty->termios_rwsem);
+
+	tty->disc_data = NULL;
+	tty->receive_room = 0;
 }
 
 /**

Re: [PATCH 3.18 34/59] tty: Prevent ldisc drivers from re-using stale tty fields

[Alan Cox]

On Tue, 23 May 2017 22:10:02 +0200
Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:

> 3.18-stable review patch.  If anyone has any objections, please let me know.
> 

Thiis is a patch designed to cause a crash in order to stop future errors
occurring. It seems less than ideal as a stable candidate.

> ------------------
> 
> From: Peter Hurley <peter@hurleysoftware.com>
> 
> commit dd42bf1197144ede075a9d4793123f7689e164bc upstream.
> 
> Line discipline drivers may mistakenly misuse ldisc-related fields
> when initializing. For example, a failure to initialize tty->receive_room
> in the N_GIGASET_M101 line discipline was recently found and fixed [1].
> Now, the N_X25 line discipline has been discovered accessing the previous
> line discipline's already-freed private data [2].
> 
> Harden the ldisc interface against misuse by initializing revelant
> tty fields before instancing the new line discipline.
> 
> [1]
>     commit fd98e9419d8d622a4de91f76b306af6aa627aa9c
>     Author: Tilman Schmidt <tilman@imap.cc>
>     Date:   Tue Jul 14 00:37:13 2015 +0200
> 
>     isdn/gigaset: reset tty->receive_room when attaching ser_gigaset
> 
> [2] Report from Sasha Levin <sasha.levin@oracle.com>
>     [  634.336761] ==================================================================
>     [  634.338226] BUG: KASAN: use-after-free in x25_asy_open_tty+0x13d/0x490 at addr ffff8800a743efd0
>     [  634.339558] Read of size 4 by task syzkaller_execu/8981
>     [  634.340359] =============================================================================
>     [  634.341598] BUG kmalloc-512 (Not tainted): kasan: bad access detected
>     ...
>     [  634.405018] Call Trace:
>     [  634.405277] dump_stack (lib/dump_stack.c:52)
>     [  634.405775] print_trailer (mm/slub.c:655)
>     [  634.406361] object_err (mm/slub.c:662)
>     [  634.406824] kasan_report_error (mm/kasan/report.c:138 mm/kasan/report.c:236)
>     [  634.409581] __asan_report_load4_noabort (mm/kasan/report.c:279)
>     [  634.411355] x25_asy_open_tty (drivers/net/wan/x25_asy.c:559 (discriminator 1))
>     [  634.413997] tty_ldisc_open.isra.2 (drivers/tty/tty_ldisc.c:447)
>     [  634.414549] tty_set_ldisc (drivers/tty/tty_ldisc.c:567)
>     [  634.415057] tty_ioctl (drivers/tty/tty_io.c:2646 drivers/tty/tty_io.c:2879)
>     [  634.423524] do_vfs_ioctl (fs/ioctl.c:43 fs/ioctl.c:607)
>     [  634.427491] SyS_ioctl (fs/ioctl.c:622 fs/ioctl.c:613)
>     [  634.427945] entry_SYSCALL_64_fastpath (arch/x86/entry/entry_64.S:188)
> 
> Cc: Tilman Schmidt <tilman@imap.cc>
> Cc: Sasha Levin <sasha.levin@oracle.com>
> Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
> Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 
> ---
>  drivers/tty/tty_ldisc.c |    7 +++++++
>  1 file changed, 7 insertions(+)
> 
> --- a/drivers/tty/tty_ldisc.c
> +++ b/drivers/tty/tty_ldisc.c
> @@ -414,6 +414,10 @@ EXPORT_SYMBOL_GPL(tty_ldisc_flush);
>   *	they are not on hot paths so a little discipline won't do
>   *	any harm.
>   *
> + *	The line discipline-related tty_struct fields are reset to
> + *	prevent the ldisc driver from re-using stale information for
> + *	the new ldisc instance.
> + *
>   *	Locking: takes termios_rwsem
>   */
>  
> @@ -422,6 +426,9 @@ static void tty_set_termios_ldisc(struct
>  	down_write(&tty->termios_rwsem);
>  	tty->termios.c_line = num;
>  	up_write(&tty->termios_rwsem);
> +
> +	tty->disc_data = NULL;
> +	tty->receive_room = 0;
>  }
>  
>  /**
> 

Re: [PATCH 3.18 34/59] tty: Prevent ldisc drivers from re-using stale tty fields

[Greg Kroah-Hartman]

On Wed, May 24, 2017 at 02:44:33PM +0100, Alan Cox wrote:
> On Tue, 23 May 2017 22:10:02 +0200
> Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> 
> > 3.18-stable review patch.  If anyone has any objections, please let me know.
> > 
> 
> Thiis is a patch designed to cause a crash in order to stop future errors
> occurring. It seems less than ideal as a stable candidate.

It has been in the 4.4-stable tree since 4.4.34, which was released last
November, and now it seems the Google "security" team thought it was
worthwhile to backport to 3.18 for their Android devices as well.  So
I'll take it, it can't hurt, and crashing is usually better than odd
errors.

thanks,

greg k-h

[PATCH 3.18 36/59] iio: proximity: as3935: fix as3935_write

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matt Ranostay <matt.ranostay@konsulko.com>

commit 84ca8e364acb26aba3292bc113ca8ed4335380fd upstream.

AS3935_WRITE_DATA macro bit is incorrect and the actual write
sequence is two leading zeros.

Cc: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/proximity/as3935.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/iio/proximity/as3935.c
+++ b/drivers/iio/proximity/as3935.c
@@ -50,7 +50,6 @@
 #define AS3935_TUNE_CAP		0x08
 #define AS3935_CALIBRATE	0x3D
 
-#define AS3935_WRITE_DATA	BIT(15)
 #define AS3935_READ_DATA	BIT(14)
 #define AS3935_ADDRESS(x)	((x) << 8)
 
@@ -103,7 +102,7 @@ static int as3935_write(struct as3935_st
 {
 	u8 *buf = st->buf;
 
-	buf[0] = (AS3935_WRITE_DATA | AS3935_ADDRESS(reg)) >> 8;
+	buf[0] = AS3935_ADDRESS(reg) >> 8;
 	buf[1] = val;
 
 	return spi_write(st->spi, buf, 2);

[PATCH 3.18 37/59] [media] gspca: konica: add missing endpoint sanity check

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit aa58fedb8c7b6cf2f05941d238495f9e2f29655c upstream.

Make sure to check the number of endpoints to avoid accessing memory
beyond the endpoint array should a device lack the expected endpoints.

Note that, as far as I can tell, the gspca framework has already made
sure there is at least one endpoint in the current alternate setting so
there should be no risk for a NULL-pointer dereference here.

Fixes: b517af722860 ("V4L/DVB: gspca_konica: New gspca subdriver for
konica chipset using cams")

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/gspca/konica.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/media/usb/gspca/konica.c
+++ b/drivers/media/usb/gspca/konica.c
@@ -188,6 +188,9 @@ static int sd_start(struct gspca_dev *gs
 		return -EIO;
 	}
 
+	if (alt->desc.bNumEndpoints < 2)
+		return -ENODEV;
+
 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
 
 	n = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;

[PATCH 3.18 38/59] [media] s5p-mfc: Fix unbalanced call to clock management

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Szyprowski <m.szyprowski@samsung.com>

commit a5cb00eb4223458250b55daf03ac7ea5f424d601 upstream.

Clock should be turned off after calling s5p_mfc_init_hw() from the
watchdog worker, like it is already done in the s5p_mfc_open() which also
calls this function.

Fixes: af93574678108 ("[media] MFC: Add MFC 5.1 V4L2 driver")

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/platform/s5p-mfc/s5p_mfc.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -169,6 +169,7 @@ static void s5p_mfc_watchdog_worker(stru
 		}
 		s5p_mfc_clock_on();
 		ret = s5p_mfc_init_hw(dev);
+		s5p_mfc_clock_off();
 		if (ret)
 			mfc_err("Failed to reinit FW\n");
 	}

[PATCH 3.18 39/59] [media] dib0700: fix NULL-deref at probe

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit d5823511c0f8719a39e72ede1bce65411ac653b7 upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.

Fixes: c4018fa2e4c0 ("[media] dib0700: fix RC support on Hauppauge
Nova-TD")

Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/dvb-usb/dib0700_core.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/media/usb/dvb-usb/dib0700_core.c
+++ b/drivers/media/usb/dvb-usb/dib0700_core.c
@@ -786,6 +786,9 @@ int dib0700_rc_setup(struct dvb_usb_devi
 
 	/* Starting in firmware 1.20, the RC info is provided on a bulk pipe */
 
+	if (intf->altsetting[0].desc.bNumEndpoints < rc_ep + 1)
+		return -ENODEV;
+
 	purb = usb_alloc_urb(0, GFP_KERNEL);
 	if (purb == NULL) {
 		err("rc usb alloc urb failed");

[PATCH 3.18 40/59] [media] zr364xx: enforce minimum size when reading header

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alyssa Milburn <amilburn@zall.org>

commit ee0fe833d96793853335844b6d99fb76bd12cbeb upstream.

This code copies actual_length-128 bytes from the header, which will
underflow if the received buffer is too small.

Signed-off-by: Alyssa Milburn <amilburn@zall.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/zr364xx/zr364xx.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/media/usb/zr364xx/zr364xx.c
+++ b/drivers/media/usb/zr364xx/zr364xx.c
@@ -605,6 +605,14 @@ static int zr364xx_read_video_callback(s
 	ptr = pdest = frm->lpvbits;
 
 	if (frm->ulState == ZR364XX_READ_IDLE) {
+		if (purb->actual_length < 128) {
+			/* header incomplete */
+			dev_info(&cam->udev->dev,
+				 "%s: buffer (%d bytes) too small to hold jpeg header. Discarding.\n",
+				 __func__, purb->actual_length);
+			return -EINVAL;
+		}
+
 		frm->ulState = ZR364XX_READ_FRAME;
 		frm->cur_size = 0;
 

[PATCH 3.18 41/59] [media] cx231xx-cards: fix NULL-deref at probe

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 0cd273bb5e4d1828efaaa8dfd11b7928131ed149 upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.

Fixes: e0d3bafd0258 ("V4L/DVB (10954): Add cx231xx USB driver")

Cc: Sri Deevi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/cx231xx/cx231xx-cards.c |   45 ++++++++++++++++++++++++++----
 1 file changed, 40 insertions(+), 5 deletions(-)

--- a/drivers/media/usb/cx231xx/cx231xx-cards.c
+++ b/drivers/media/usb/cx231xx/cx231xx-cards.c
@@ -1291,6 +1291,9 @@ static int cx231xx_init_v4l2(struct cx23
 
 	uif = udev->actconfig->interface[idx];
 
+	if (uif->altsetting[0].desc.bNumEndpoints < isoc_pipe + 1)
+		return -ENODEV;
+
 	dev->video_mode.end_point_addr = uif->altsetting[0].endpoint[isoc_pipe].desc.bEndpointAddress;
 	dev->video_mode.num_alt = uif->num_altsetting;
 
@@ -1305,7 +1308,12 @@ static int cx231xx_init_v4l2(struct cx23
 	}
 
 	for (i = 0; i < dev->video_mode.num_alt; i++) {
-		u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
+		u16 tmp;
+
+		if (uif->altsetting[i].desc.bNumEndpoints < isoc_pipe + 1)
+			return -ENODEV;
+
+		tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
 		dev->video_mode.alt_max_pkt_size[i] = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
 		cx231xx_info("Alternate setting %i, max size= %i\n", i,
 			     dev->video_mode.alt_max_pkt_size[i]);
@@ -1320,6 +1328,9 @@ static int cx231xx_init_v4l2(struct cx23
 	}
 	uif = udev->actconfig->interface[idx];
 
+	if (uif->altsetting[0].desc.bNumEndpoints < isoc_pipe + 1)
+		return -ENODEV;
+
 	dev->vbi_mode.end_point_addr =
 	    uif->altsetting[0].endpoint[isoc_pipe].desc.
 			bEndpointAddress;
@@ -1337,8 +1348,12 @@ static int cx231xx_init_v4l2(struct cx23
 	}
 
 	for (i = 0; i < dev->vbi_mode.num_alt; i++) {
-		u16 tmp =
-		    le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].
+		u16 tmp;
+
+		if (uif->altsetting[i].desc.bNumEndpoints < isoc_pipe + 1)
+			return -ENODEV;
+
+		tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].
 				desc.wMaxPacketSize);
 		dev->vbi_mode.alt_max_pkt_size[i] =
 		    (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
@@ -1356,6 +1371,9 @@ static int cx231xx_init_v4l2(struct cx23
 	}
 	uif = udev->actconfig->interface[idx];
 
+	if (uif->altsetting[0].desc.bNumEndpoints < isoc_pipe + 1)
+		return -ENODEV;
+
 	dev->sliced_cc_mode.end_point_addr =
 	    uif->altsetting[0].endpoint[isoc_pipe].desc.
 			bEndpointAddress;
@@ -1372,7 +1390,12 @@ static int cx231xx_init_v4l2(struct cx23
 	}
 
 	for (i = 0; i < dev->sliced_cc_mode.num_alt; i++) {
-		u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].
+		u16 tmp;
+
+		if (uif->altsetting[i].desc.bNumEndpoints < isoc_pipe + 1)
+			return -ENODEV;
+
+		tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].
 				desc.wMaxPacketSize);
 		dev->sliced_cc_mode.alt_max_pkt_size[i] =
 		    (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
@@ -1526,6 +1549,11 @@ static int cx231xx_usb_probe(struct usb_
 		}
 		uif = udev->actconfig->interface[idx];
 
+		if (uif->altsetting[0].desc.bNumEndpoints < isoc_pipe + 1) {
+			retval = -ENODEV;
+			goto err_video_alt;
+		}
+
 		dev->ts1_mode.end_point_addr =
 		    uif->altsetting[0].endpoint[isoc_pipe].
 				desc.bEndpointAddress;
@@ -1543,7 +1571,14 @@ static int cx231xx_usb_probe(struct usb_
 		}
 
 		for (i = 0; i < dev->ts1_mode.num_alt; i++) {
-			u16 tmp = le16_to_cpu(uif->altsetting[i].
+			u16 tmp;
+
+			if (uif->altsetting[i].desc.bNumEndpoints < isoc_pipe + 1) {
+				retval = -ENODEV;
+				goto err_video_alt;
+			}
+
+			tmp = le16_to_cpu(uif->altsetting[i].
 						endpoint[isoc_pipe].desc.
 						wMaxPacketSize);
 			dev->ts1_mode.alt_max_pkt_size[i] =

[PATCH 3.18 42/59] [media] cx231xx-audio: fix NULL-deref at probe

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 65f921647f4c89a2068478c89691f39b309b58f7 upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.

Fixes: e0d3bafd0258 ("V4L/DVB (10954): Add cx231xx USB driver")

Cc: Sri Deevi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/cx231xx/cx231xx-audio.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

--- a/drivers/media/usb/cx231xx/cx231xx-audio.c
+++ b/drivers/media/usb/cx231xx/cx231xx-audio.c
@@ -702,6 +702,11 @@ static int cx231xx_audio_init(struct cx2
 					    hs_config_info[0].interface_info.
 					    audio_index + 1];
 
+	if (uif->altsetting[0].desc.bNumEndpoints < isoc_pipe + 1) {
+		snd_card_free(card);
+		return -ENODEV;
+	}
+
 	adev->end_point_addr =
 	    uif->altsetting[0].endpoint[isoc_pipe].desc.
 			bEndpointAddress;
@@ -717,8 +722,14 @@ static int cx231xx_audio_init(struct cx2
 	}
 
 	for (i = 0; i < adev->num_alt; i++) {
-		u16 tmp =
-		    le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.
+		u16 tmp;
+
+		if (uif->altsetting[i].desc.bNumEndpoints < isoc_pipe + 1) {
+			snd_card_free(card);
+			return -ENODEV;
+		}
+
+		tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.
 				wMaxPacketSize);
 		adev->alt_max_pkt_size[i] =
 		    (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);

[PATCH 3.18 43/59] powerpc/pseries: Fix of_node_put() underflow during DLPAR remove

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>

commit 68baf692c435339e6295cb470ea5545cbc28160e upstream.

Historically struct device_node references were tracked using a kref embedded as
a struct field. Commit 75b57ecf9d1d ("of: Make device nodes kobjects so they
show up in sysfs") (Mar 2014) refactored device_nodes to be kobjects such that
the device tree could by more simply exposed to userspace using sysfs.

Commit 0829f6d1f69e ("of: device_node kobject lifecycle fixes") (Mar 2014)
followed up these changes to better control the kobject lifecycle and in
particular the referecne counting via of_node_get(), of_node_put(), and
of_node_init().

A result of this second commit was that it introduced an of_node_put() call when
a dynamic node is detached, in of_node_remove(), that removes the initial kobj
reference created by of_node_init().

Traditionally as the original dynamic device node user the pseries code had
assumed responsibilty for releasing this final reference in its platform
specific DLPAR detach code.

This patch fixes a refcount underflow introduced by commit 0829f6d1f6, and
recently exposed by the upstreaming of the recount API.

Messages like the following are no longer seen in the kernel log with this
patch following DLPAR remove operations of cpus and pci devices.

  rpadlpar_io: slot PHB 72 removed
  refcount_t: underflow; use-after-free.
  ------------[ cut here ]------------
  WARNING: CPU: 5 PID: 3335 at lib/refcount.c:128 refcount_sub_and_test+0xf4/0x110

Fixes: 0829f6d1f69e ("of: device_node kobject lifecycle fixes")
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
[mpe: Make change log commit references more verbose]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/platforms/pseries/dlpar.c |    1 -
 1 file changed, 1 deletion(-)

--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -299,7 +299,6 @@ int dlpar_detach_node(struct device_node
 	if (rc)
 		return rc;
 
-	of_node_put(dn); /* Must decrement the refcount */
 	return 0;
 }
 

[PATCH 3.18 44/59] ARM: dts: at91: sama5d3_xplained: fix ADC vref

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ludovic Desroches <ludovic.desroches@microchip.com>

commit 9cdd31e5913c1f86dce7e201b086155b3f24896b upstream.

The voltage reference for the ADC is not 3V but 3.3V since it is connected to
VDDANA.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/at91-sama5d3_xplained.dts |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -143,6 +143,7 @@
 			};
 
 			adc0: adc@f8018000 {
+				atmel,adc-vref = <3300>;
 				pinctrl-0 = <
 					&pinctrl_adc0_adtrg
 					&pinctrl_adc0_ad0

[PATCH 3.18 45/59] ARM: dts: at91: sama5d3_xplained: not all ADC channels are available

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ludovic Desroches <ludovic.desroches@microchip.com>

commit d3df1ec06353e51fc44563d2e7e18d42811af290 upstream.

Remove ADC channels that are not available by default on the sama5d3_xplained
board (resistor not populated) in order to not create confusion.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/at91-sama5d3_xplained.dts |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -144,9 +144,9 @@
 
 			adc0: adc@f8018000 {
 				atmel,adc-vref = <3300>;
+				atmel,adc-channels-used = <0xfe>;
 				pinctrl-0 = <
 					&pinctrl_adc0_adtrg
-					&pinctrl_adc0_ad0
 					&pinctrl_adc0_ad1
 					&pinctrl_adc0_ad2
 					&pinctrl_adc0_ad3
@@ -154,8 +154,6 @@
 					&pinctrl_adc0_ad5
 					&pinctrl_adc0_ad6
 					&pinctrl_adc0_ad7
-					&pinctrl_adc0_ad8
-					&pinctrl_adc0_ad9
 					>;
 				status = "okay";
 			};

[PATCH 3.18 46/59] arm64: uaccess: ensure extension of access_ok() addr

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Rutland <mark.rutland@arm.com>

commit a06040d7a791a9177581dcf7293941bd92400856 upstream.

Our access_ok() simply hands its arguments over to __range_ok(), which
implicitly assummes that the addr parameter is 64 bits wide. This isn't
necessarily true for compat code, which might pass down a 32-bit address
parameter.

In these cases, we don't have a guarantee that the address has been zero
extended to 64 bits, and the upper bits of the register may contain
unknown values, potentially resulting in a suprious failure.

Avoid this by explicitly casting the addr parameter to an unsigned long
(as is done on other architectures), ensuring that the parameter is
widened appropriately.

Fixes: 0aea86a2176c ("arm64: User access library functions")
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/include/asm/uaccess.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/arm64/include/asm/uaccess.h
+++ b/arch/arm64/include/asm/uaccess.h
@@ -89,11 +89,12 @@ static inline void set_fs(mm_segment_t f
  */
 #define __range_ok(addr, size)						\
 ({									\
+	unsigned long __addr = (unsigned long __force)(addr);		\
 	unsigned long flag, roksum;					\
 	__chk_user_ptr(addr);						\
 	asm("adds %1, %1, %3; ccmp %1, %4, #2, cc; cset %0, ls"		\
 		: "=&r" (flag), "=&r" (roksum)				\
-		: "1" (addr), "Ir" (size),				\
+		: "1" (__addr), "Ir" (size),				\
 		  "r" (current_thread_info()->addr_limit)		\
 		: "cc");						\
 	flag;								\

[PATCH 3.18 47/59] arm64: documentation: document tagged pointer stack constraints

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kristina Martsenko <kristina.martsenko@arm.com>

commit f0e421b1bf7af97f026e1bb8bfe4c5a7a8c08f42 upstream.

Some kernel features don't currently work if a task puts a non-zero
address tag in its stack pointer, frame pointer, or frame record entries
(FP, LR).

For example, with a tagged stack pointer, the kernel can't deliver
signals to the process, and the task is killed instead. As another
example, with a tagged frame pointer or frame records, perf fails to
generate call graphs or resolve symbols.

For now, just document these limitations, instead of finding and fixing
everything that doesn't work, as it's not known if anyone needs to use
tags in these places anyway.

In addition, as requested by Dave Martin, generalize the limitations
into a general kernel address tag policy, and refactor
tagged-pointers.txt to include it.

Fixes: d50240a5f6ce ("arm64: mm: permit use of tagged pointers at EL0")
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/arm64/tagged-pointers.txt |   66 +++++++++++++++++++++++---------
 1 file changed, 49 insertions(+), 17 deletions(-)

--- a/Documentation/arm64/tagged-pointers.txt
+++ b/Documentation/arm64/tagged-pointers.txt
@@ -11,24 +11,56 @@ in AArch64 Linux.
 The kernel configures the translation tables so that translations made
 via TTBR0 (i.e. userspace mappings) have the top byte (bits 63:56) of
 the virtual address ignored by the translation hardware. This frees up
-this byte for application use, with the following caveats:
+this byte for application use.
 
-	(1) The kernel requires that all user addresses passed to EL1
-	    are tagged with tag 0x00. This means that any syscall
-	    parameters containing user virtual addresses *must* have
-	    their top byte cleared before trapping to the kernel.
-
-	(2) Non-zero tags are not preserved when delivering signals.
-	    This means that signal handlers in applications making use
-	    of tags cannot rely on the tag information for user virtual
-	    addresses being maintained for fields inside siginfo_t.
-	    One exception to this rule is for signals raised in response
-	    to watchpoint debug exceptions, where the tag information
-	    will be preserved.
-
-	(3) Special care should be taken when using tagged pointers,
-	    since it is likely that C compilers will not hazard two
-	    virtual addresses differing only in the upper byte.
+
+Passing tagged addresses to the kernel
+--------------------------------------
+
+All interpretation of userspace memory addresses by the kernel assumes
+an address tag of 0x00.
+
+This includes, but is not limited to, addresses found in:
+
+ - pointer arguments to system calls, including pointers in structures
+   passed to system calls,
+
+ - the stack pointer (sp), e.g. when interpreting it to deliver a
+   signal,
+
+ - the frame pointer (x29) and frame records, e.g. when interpreting
+   them to generate a backtrace or call graph.
+
+Using non-zero address tags in any of these locations may result in an
+error code being returned, a (fatal) signal being raised, or other modes
+of failure.
+
+For these reasons, passing non-zero address tags to the kernel via
+system calls is forbidden, and using a non-zero address tag for sp is
+strongly discouraged.
+
+Programs maintaining a frame pointer and frame records that use non-zero
+address tags may suffer impaired or inaccurate debug and profiling
+visibility.
+
+
+Preserving tags
+---------------
+
+Non-zero tags are not preserved when delivering signals. This means that
+signal handlers in applications making use of tags cannot rely on the
+tag information for user virtual addresses being maintained for fields
+inside siginfo_t. One exception to this rule is for signals raised in
+response to watchpoint debug exceptions, where the tag information will
+be preserved.
 
 The architecture prevents the use of a tagged PC, so the upper byte will
 be set to a sign-extension of bit 55 on exception return.
+
+
+Other considerations
+--------------------
+
+Special care should be taken when using tagged pointers, since it is
+likely that C compilers will not hazard two virtual addresses differing
+only in the upper byte.

[PATCH 3.18 48/59] xc2028: Fix use-after-free bug properly

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 22a1e7783e173ab3d86018eb590107d68df46c11 upstream.

The commit 8dfbcc4351a0 ("[media] xc2028: avoid use after free") tried
to address the reported use-after-free by clearing the reference.

However, it's clearing the wrong pointer; it sets NULL to
priv->ctrl.fname, but it's anyway overwritten by the next line
memcpy(&priv->ctrl, p, sizeof(priv->ctrl)).

OTOH, the actual code accessing the freed string is the strcmp() call
with priv->fname:
	if (!firmware_name[0] && p->fname &&
	    priv->fname && strcmp(p->fname, priv->fname))
		free_firmware(priv);

where priv->fname points to the previous file name, and this was
already freed by kfree().

For fixing the bug properly, this patch does the following:

- Keep the copy of firmware file name in only priv->fname,
  priv->ctrl.fname isn't changed;
- The allocation is done only when the firmware gets loaded;
- The kfree() is called in free_firmware() commonly

Fixes: commit 8dfbcc4351a0 ('[media] xc2028: avoid use after free')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/tuners/tuner-xc2028.c |   37 +++++++++++++++---------------------
 1 file changed, 16 insertions(+), 21 deletions(-)

--- a/drivers/media/tuners/tuner-xc2028.c
+++ b/drivers/media/tuners/tuner-xc2028.c
@@ -281,6 +281,14 @@ static void free_firmware(struct xc2028_
 	int i;
 	tuner_dbg("%s called\n", __func__);
 
+	/* free allocated f/w string */
+	if (priv->fname != firmware_name)
+		kfree(priv->fname);
+	priv->fname = NULL;
+
+	priv->state = XC2028_NO_FIRMWARE;
+	memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
+
 	if (!priv->firm)
 		return;
 
@@ -291,9 +299,6 @@ static void free_firmware(struct xc2028_
 
 	priv->firm = NULL;
 	priv->firm_size = 0;
-	priv->state = XC2028_NO_FIRMWARE;
-
-	memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
 }
 
 static int load_all_firmwares(struct dvb_frontend *fe,
@@ -884,9 +889,8 @@ read_not_reliable:
 	return 0;
 
 fail:
-	priv->state = XC2028_NO_FIRMWARE;
+	free_firmware(priv);
 
-	memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
 	if (retry_count < 8) {
 		msleep(50);
 		retry_count++;
@@ -1332,11 +1336,8 @@ static int xc2028_dvb_release(struct dvb
 	mutex_lock(&xc2028_list_mutex);
 
 	/* only perform final cleanup if this is the last instance */
-	if (hybrid_tuner_report_instance_count(priv) == 1) {
+	if (hybrid_tuner_report_instance_count(priv) == 1)
 		free_firmware(priv);
-		kfree(priv->ctrl.fname);
-		priv->ctrl.fname = NULL;
-	}
 
 	if (priv)
 		hybrid_tuner_release_state(priv);
@@ -1399,19 +1400,8 @@ static int xc2028_set_config(struct dvb_
 
 	/*
 	 * Copy the config data.
-	 * For the firmware name, keep a local copy of the string,
-	 * in order to avoid troubles during device release.
 	 */
-	kfree(priv->ctrl.fname);
-	priv->ctrl.fname = NULL;
 	memcpy(&priv->ctrl, p, sizeof(priv->ctrl));
-	if (p->fname) {
-		priv->ctrl.fname = kstrdup(p->fname, GFP_KERNEL);
-		if (priv->ctrl.fname == NULL) {
-			rc = -ENOMEM;
-			goto unlock;
-		}
-	}
 
 	/*
 	 * If firmware name changed, frees firmware. As free_firmware will
@@ -1426,10 +1416,15 @@ static int xc2028_set_config(struct dvb_
 
 	if (priv->state == XC2028_NO_FIRMWARE) {
 		if (!firmware_name[0])
-			priv->fname = priv->ctrl.fname;
+			priv->fname = kstrdup(p->fname, GFP_KERNEL);
 		else
 			priv->fname = firmware_name;
 
+		if (!priv->fname) {
+			rc = -ENOMEM;
+			goto unlock;
+		}
+
 		rc = request_firmware_nowait(THIS_MODULE, 1,
 					     priv->fname,
 					     priv->i2c_props.adap->dev.parent,

[PATCH 3.18 49/59] mm/huge_memory.c: respect FOLL_FORCE/FOLL_COW for thp

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Keno Fischer <keno@juliacomputing.com>

commit 8310d48b125d19fcd9521d83b8293e63eb1646aa upstream.

In commit 19be0eaffa3a ("mm: remove gup_flags FOLL_WRITE games from
__get_user_pages()"), the mm code was changed from unsetting FOLL_WRITE
after a COW was resolved to setting the (newly introduced) FOLL_COW
instead.  Simultaneously, the check in gup.c was updated to still allow
writes with FOLL_FORCE set if FOLL_COW had also been set.

However, a similar check in huge_memory.c was forgotten.  As a result,
remote memory writes to ro regions of memory backed by transparent huge
pages cause an infinite loop in the kernel (handle_mm_fault sets
FOLL_COW and returns 0 causing a retry, but follow_trans_huge_pmd bails
out immidiately because `(flags & FOLL_WRITE) && !pmd_write(*pmd)` is
true.

While in this state the process is stil SIGKILLable, but little else
works (e.g.  no ptrace attach, no other signals).  This is easily
reproduced with the following code (assuming thp are set to always):

    #include <assert.h>
    #include <fcntl.h>
    #include <stdint.h>
    #include <stdio.h>
    #include <string.h>
    #include <sys/mman.h>
    #include <sys/stat.h>
    #include <sys/types.h>
    #include <sys/wait.h>
    #include <unistd.h>

    #define TEST_SIZE 5 * 1024 * 1024

    int main(void) {
      int status;
      pid_t child;
      int fd = open("/proc/self/mem", O_RDWR);
      void *addr = mmap(NULL, TEST_SIZE, PROT_READ,
                        MAP_ANONYMOUS | MAP_PRIVATE, 0, 0);
      assert(addr != MAP_FAILED);
      pid_t parent_pid = getpid();
      if ((child = fork()) == 0) {
        void *addr2 = mmap(NULL, TEST_SIZE, PROT_READ | PROT_WRITE,
                           MAP_ANONYMOUS | MAP_PRIVATE, 0, 0);
        assert(addr2 != MAP_FAILED);
        memset(addr2, 'a', TEST_SIZE);
        pwrite(fd, addr2, TEST_SIZE, (uintptr_t)addr);
        return 0;
      }
      assert(child == waitpid(child, &status, 0));
      assert(WIFEXITED(status) && WEXITSTATUS(status) == 0);
      return 0;
    }

Fix this by updating follow_trans_huge_pmd in huge_memory.c analogously
to the update in gup.c in the original commit.  The same pattern exists
in follow_devmap_pmd.  However, we should not be able to reach that
check with FOLL_COW set, so add WARN_ONCE to make sure we notice if we
ever do.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170106015025.GA38411@juliacomputing.com
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[AmitP: Minor refactoring of upstream changes for linux-3.18.y,
        where follow_devmap_pmd() doesn't exist.]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/huge_memory.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -1205,6 +1205,16 @@ out_unlock:
 	return ret;
 }
 
+/*
+ * FOLL_FORCE can write to even unwritable pmd's, but only
+ * after we've gone through a COW cycle and they are dirty.
+ */
+static inline bool can_follow_write_pmd(pmd_t pmd, unsigned int flags)
+{
+	return pmd_write(pmd) ||
+	       ((flags & FOLL_FORCE) && (flags & FOLL_COW) && pmd_dirty(pmd));
+}
+
 struct page *follow_trans_huge_pmd(struct vm_area_struct *vma,
 				   unsigned long addr,
 				   pmd_t *pmd,
@@ -1215,7 +1225,7 @@ struct page *follow_trans_huge_pmd(struc
 
 	assert_spin_locked(pmd_lockptr(mm, pmd));
 
-	if (flags & FOLL_WRITE && !pmd_write(*pmd))
+	if (flags & FOLL_WRITE && !can_follow_write_pmd(*pmd, flags))
 		goto out;
 
 	/* Avoid dumping huge zero page */

[PATCH 3.18 50/59] metag/uaccess: Fix access_ok()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit 8a8b56638bcac4e64cccc88bf95a0f9f4b19a2fb upstream.

The __user_bad() macro used by access_ok() has a few corner cases
noticed by Al Viro where it doesn't behave correctly:

 - The kernel range check has off by 1 errors which permit access to the
   first and last byte of the kernel mapped range.

 - The kernel range check ends at LINCORE_BASE rather than
   META_MEMORY_LIMIT, which is ineffective when the kernel is in global
   space (an extremely uncommon configuration).

There are a couple of other shortcomings here too:

 - Access to the whole of the other address space is permitted (i.e. the
   global half of the address space when the kernel is in local space).
   This isn't ideal as it could theoretically still contain privileged
   mappings set up by the bootloader.

 - The size argument is unused, permitting user copies which start on
   valid pages at the end of the user address range and cross the
   boundary into the kernel address space (e.g. addr = 0x3ffffff0, size
   > 0x10).

It isn't very convenient to add size checks when disallowing certain
regions, and it seems far safer to be sure and explicit about what
userland is able to access, so invert the logic to allow certain regions
instead, and fix the off by 1 errors and missing size checks. This also
allows the get_fs() == KERNEL_DS check to be more easily optimised into
the user address range case.

We now have 3 such allowed regions:

 - The user address range (incorporating the get_fs() == KERNEL_DS
   check).

 - NULL (some kernel code expects this to work, and we'll always catch
   the fault anyway).

 - The core code memory region.

Fixes: 373cd784d0fc ("metag: Memory handling")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/metag/include/asm/uaccess.h |   40 +++++++++++++++++++++++----------------
 1 file changed, 24 insertions(+), 16 deletions(-)

--- a/arch/metag/include/asm/uaccess.h
+++ b/arch/metag/include/asm/uaccess.h
@@ -28,24 +28,32 @@
 
 #define segment_eq(a, b)	((a).seg == (b).seg)
 
-#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
-/*
- * Explicitly allow NULL pointers here. Parts of the kernel such
- * as readv/writev use access_ok to validate pointers, but want
- * to allow NULL pointers for various reasons. NULL pointers are
- * safe to allow through because the first page is not mappable on
- * Meta.
- *
- * We also wish to avoid letting user code access the system area
- * and the kernel half of the address space.
- */
-#define __user_bad(addr, size) (((addr) > 0 && (addr) < META_MEMORY_BASE) || \
-				((addr) > PAGE_OFFSET &&		\
-				 (addr) < LINCORE_BASE))
-
 static inline int __access_ok(unsigned long addr, unsigned long size)
 {
-	return __kernel_ok || !__user_bad(addr, size);
+	/*
+	 * Allow access to the user mapped memory area, but not the system area
+	 * before it. The check extends to the top of the address space when
+	 * kernel access is allowed (there's no real reason to user copy to the
+	 * system area in any case).
+	 */
+	if (likely(addr >= META_MEMORY_BASE && addr < get_fs().seg &&
+		   size <= get_fs().seg - addr))
+		return true;
+	/*
+	 * Explicitly allow NULL pointers here. Parts of the kernel such
+	 * as readv/writev use access_ok to validate pointers, but want
+	 * to allow NULL pointers for various reasons. NULL pointers are
+	 * safe to allow through because the first page is not mappable on
+	 * Meta.
+	 */
+	if (!addr)
+		return true;
+	/* Allow access to core code memory area... */
+	if (addr >= LINCORE_CODE_BASE && addr <= LINCORE_CODE_LIMIT &&
+	    size <= LINCORE_CODE_LIMIT + 1 - addr)
+		return true;
+	/* ... but no other areas. */
+	return false;
 }
 
 #define access_ok(type, addr, size) __access_ok((unsigned long)(addr),	\

[PATCH 3.18 51/59] metag/uaccess: Check access_ok in strncpy_from_user

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit 3a158a62da0673db918b53ac1440845a5b64fd90 upstream.

The metag implementation of strncpy_from_user() doesn't validate the src
pointer, which could allow reading of arbitrary kernel memory. Add a
short access_ok() check to prevent that.

Its still possible for it to read across the user/kernel boundary, but
it will invariably reach a NUL character after only 9 bytes, leaking
only a static kernel address being loaded into D0Re0 at the beginning of
__start, which is acceptable for the immediate fix.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/metag/include/asm/uaccess.h |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/arch/metag/include/asm/uaccess.h
+++ b/arch/metag/include/asm/uaccess.h
@@ -189,8 +189,13 @@ do {
 extern long __must_check __strncpy_from_user(char *dst, const char __user *src,
 					     long count);
 
-#define strncpy_from_user(dst, src, count) __strncpy_from_user(dst, src, count)
-
+static inline long
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	if (!access_ok(VERIFY_READ, src, 1))
+		return -EFAULT;
+	return __strncpy_from_user(dst, src, count);
+}
 /*
  * Return the size of a string (including the ending 0)
  *

[PATCH 3.18 52/59] stackprotector: Increase the per-task stack canarys random range from 32 bits to 64 bits on 64-bit platforms

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Micay <danielmicay@gmail.com>

commit 5ea30e4e58040cfd6434c2f33dc3ea76e2c15b05 upstream.

The stack canary is an 'unsigned long' and should be fully initialized to
random data rather than only 32 bits of random data.

Signed-off-by: Daniel Micay <danielmicay@gmail.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Arjan van Ven <arjan@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-hardening@lists.openwall.com
Link: http://lkml.kernel.org/r/20170504133209.3053-1-danielmicay@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/fork.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -338,7 +338,7 @@ static struct task_struct *dup_task_stru
 	set_task_stack_end_magic(tsk);
 
 #ifdef CONFIG_CC_STACKPROTECTOR
-	tsk->stack_canary = get_random_int();
+	tsk->stack_canary = get_random_long();
 #endif
 
 	/*

[kernel-hardening] [PATCH 3.18 52/59] stackprotector: Increase the per-task stack canarys random range from 32 bits to 64 bits on 64-bit platforms

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Micay <danielmicay@gmail.com>

commit 5ea30e4e58040cfd6434c2f33dc3ea76e2c15b05 upstream.

The stack canary is an 'unsigned long' and should be fully initialized to
random data rather than only 32 bits of random data.

Signed-off-by: Daniel Micay <danielmicay@gmail.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Arjan van Ven <arjan@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-hardening@lists.openwall.com
Link: http://lkml.kernel.org/r/20170504133209.3053-1-danielmicay@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/fork.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -338,7 +338,7 @@ static struct task_struct *dup_task_stru
 	set_task_stack_end_magic(tsk);
 
 #ifdef CONFIG_CC_STACKPROTECTOR
-	tsk->stack_canary = get_random_int();
+	tsk->stack_canary = get_random_long();
 #endif
 
 	/*

[PATCH 3.18 53/59] uwb: fix device quirk on big-endian hosts

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 41318a2b82f5d5fe1fb408f6d6e0b22aa557111d upstream.

Add missing endianness conversion when using the USB device-descriptor
idProduct field to apply a hardware quirk.

Fixes: 1ba47da52712 ("uwb: add the i1480 DFU driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/uwb/i1480/dfu/usb.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/uwb/i1480/dfu/usb.c
+++ b/drivers/uwb/i1480/dfu/usb.c
@@ -341,6 +341,7 @@ error_submit_ep1:
 static
 int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id)
 {
+	struct usb_device *udev = interface_to_usbdev(iface);
 	struct i1480_usb *i1480_usb;
 	struct i1480 *i1480;
 	struct device *dev = &iface->dev;
@@ -352,8 +353,8 @@ int i1480_usb_probe(struct usb_interface
 			iface->cur_altsetting->desc.bInterfaceNumber);
 		goto error;
 	}
-	if (iface->num_altsetting > 1
-	    && interface_to_usbdev(iface)->descriptor.idProduct == 0xbabe) {
+	if (iface->num_altsetting > 1 &&
+			le16_to_cpu(udev->descriptor.idProduct) == 0xbabe) {
 		/* Need altsetting #1 [HW QUIRK] or EP1 won't work */
 		result = usb_set_interface(interface_to_usbdev(iface), 0, 1);
 		if (result < 0)

[PATCH 3.18 54/59] osf_wait4(): fix infoleak

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@zeniv.linux.org.uk>

commit a8c39544a6eb2093c04afd5005b6192bd0e880c6 upstream.

failing sys_wait4() won't fill struct rusage...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/alpha/kernel/osf_sys.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -1183,8 +1183,10 @@ SYSCALL_DEFINE4(osf_wait4, pid_t, pid, i
 	if (!access_ok(VERIFY_WRITE, ur, sizeof(*ur)))
 		return -EFAULT;
 
-	err = 0;
-	err |= put_user(status, ustatus);
+	err = put_user(status, ustatus);
+	if (ret < 0)
+		return err ? err : ret;
+
 	err |= __put_user(r.ru_utime.tv_sec, &ur->ru_utime.tv_sec);
 	err |= __put_user(r.ru_utime.tv_usec, &ur->ru_utime.tv_usec);
 	err |= __put_user(r.ru_stime.tv_sec, &ur->ru_stime.tv_sec);

[PATCH 3.18 55/59] tracing/kprobes: Enforce kprobes teardown after testing

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

commit 30e7d894c1478c88d50ce94ddcdbd7f9763d9cdd upstream.

Enabling the tracer selftest triggers occasionally the warning in
text_poke(), which warns when the to be modified page is not marked
reserved.

The reason is that the tracer selftest installs kprobes on functions marked
__init for testing. These probes are removed after the tests, but that
removal schedules the delayed kprobes_optimizer work, which will do the
actual text poke. If the work is executed after the init text is freed,
then the warning triggers. The bug can be reproduced reliably when the work
delay is increased.

Flush the optimizer work and wait for the optimizing/unoptimizing lists to
become empty before returning from the kprobes tracer selftest. That
ensures that all operations which were queued due to the probes removal
have completed.

Link: http://lkml.kernel.org/r/20170516094802.76a468bb@gandalf.local.home

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 6274de498 ("kprobes: Support delayed unoptimizing")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/kprobes.h     |    4 +++-
 kernel/kprobes.c            |    2 +-
 kernel/trace/trace_kprobe.c |    5 +++++
 3 files changed, 9 insertions(+), 2 deletions(-)

--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -327,7 +327,9 @@ extern int proc_kprobes_optimization_han
 					     int write, void __user *buffer,
 					     size_t *length, loff_t *ppos);
 #endif
-
+extern void wait_for_kprobe_optimizer(void);
+#else
+static inline void wait_for_kprobe_optimizer(void) { }
 #endif /* CONFIG_OPTPROBES */
 #ifdef CONFIG_KPROBES_ON_FTRACE
 extern void kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -563,7 +563,7 @@ static void kprobe_optimizer(struct work
 }
 
 /* Wait for completing optimization and unoptimization */
-static void wait_for_kprobe_optimizer(void)
+void wait_for_kprobe_optimizer(void)
 {
 	mutex_lock(&kprobe_mutex);
 
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -1484,6 +1484,11 @@ static __init int kprobe_trace_self_test
 
 end:
 	release_all_trace_kprobes();
+	/*
+	 * Wait for the optimizer work to finish. Otherwise it might fiddle
+	 * with probes in already freed __init text.
+	 */
+	wait_for_kprobe_optimizer();
 	if (warn)
 		pr_cont("NG: Some tests are failed. Please check them.\n");
 	else

[PATCH 3.18 56/59] PCI: Fix pci_mmap_fits() for HAVE_PCI_RESOURCE_TO_USER platforms

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Woodhouse <dwmw@amazon.co.uk>

commit 6bccc7f426abd640f08d8c75fb22f99483f201b4 upstream.

In the PCI_MMAP_PROCFS case when the address being passed by the user is a
'user visible' resource address based on the bus window, and not the actual
contents of the resource, that's what we need to be checking it against.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/pci-sysfs.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -964,15 +964,19 @@ void pci_remove_legacy_files(struct pci_
 int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma,
 		  enum pci_mmap_api mmap_api)
 {
-	unsigned long nr, start, size, pci_start;
+	unsigned long nr, start, size;
+	resource_size_t pci_start = 0, pci_end;
 
 	if (pci_resource_len(pdev, resno) == 0)
 		return 0;
 	nr = vma_pages(vma);
 	start = vma->vm_pgoff;
 	size = ((pci_resource_len(pdev, resno) - 1) >> PAGE_SHIFT) + 1;
-	pci_start = (mmap_api == PCI_MMAP_PROCFS) ?
-			pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0;
+	if (mmap_api == PCI_MMAP_PROCFS) {
+		pci_resource_to_user(pdev, resno, &pdev->resource[resno],
+				     &pci_start, &pci_end);
+		pci_start >>= PAGE_SHIFT;
+	}
 	if (start >= pci_start && start < pci_start + size &&
 			start + nr <= pci_start + size)
 		return 1;

[PATCH 3.18 58/59] drivers: char: mem: Check for address space wraparound with mmap()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julius Werner <jwerner@chromium.org>

commit b299cde245b0b76c977f4291162cf668e087b408 upstream.

/dev/mem currently allows mmap() mappings that wrap around the end of
the physical address space, which should probably be illegal. It
circumvents the existing STRICT_DEVMEM permission check because the loop
immediately terminates (as the start address is already higher than the
end address). On the x86_64 architecture it will then cause a panic
(from the BUG(start >= end) in arch/x86/mm/pat.c:reserve_memtype()).

This patch adds an explicit check to make sure offset + size will not
wrap around in the physical address type.

Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/mem.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -329,6 +329,11 @@ static const struct vm_operations_struct
 static int mmap_mem(struct file *file, struct vm_area_struct *vma)
 {
 	size_t size = vma->vm_end - vma->vm_start;
+	phys_addr_t offset = (phys_addr_t)vma->vm_pgoff << PAGE_SHIFT;
+
+	/* It's illegal to wrap around the end of the physical address space. */
+	if (offset + (phys_addr_t)size < offset)
+		return -EINVAL;
 
 	if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size))
 		return -EINVAL;

[PATCH 3.18 59/59] usb: misc: legousbtower: Fix memory leak

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maksim Salau <maksim.salau@gmail.com>

commit 0bd193d62b4270a2a7a09da43ad1034c7ca5b3d3 upstream.

get_version_reply is not freed if function returns with success.

Fixes: 942a48730faf ("usb: misc: legousbtower: Fix buffers on stack")
Reported-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Maksim Salau <maksim.salau@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/misc/legousbtower.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -954,6 +954,7 @@ static int tower_probe (struct usb_inter
 
 
 exit:
+	kfree(get_version_reply);
 	return retval;
 
 error:

Re: [PATCH 3.18 00/59] 3.18.55-stable review

[Guenter Roeck]

On Tue, May 23, 2017 at 10:09:28PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.55 release.
> There are 59 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu May 25 20:08:28 UTC 2017.
> Anything received after that time might be too late.
> 

Build results:
	total: 136 pass: 136 fail: 0
Qemu test results:
	total: 111 pass: 111 fail: 0

Details are available at http://kerneltests.org/builders.

Guenter

Use case for TASKS_RCU

[Paul E. McKenney]

Hello!

The question of the use case for TASKS_RCU came up, and here is my
understanding.  Steve will not be shy about correcting any misconceptions
I might have.  ;-)

The use case is to support freeing of trampolines used in tracing/probing
in CONFIG_PREEMPT=y kernels.  It is necessary to wait until any task
executing in the trampoline in question has left it, taking into account
that the trampoline's code might be interrupted and preempted.  However,
the code in the trampolines is guaranteed never to context switch.

Note that in CONFIG_PREEMPT=n kernels, synchronize_sched() suffices.
It is therefore tempting to think in terms of disabling preemption across
the trampolines, but there is apparently not enough room to accommodate
the needed preempt_disable() and preempt_enable() in the code invoking
the trampoline, and putting the preempt_disable() and preempt_enable()
in the trampoline itself fails because of the possibility of preemption
just before the preempt_disable() and just after the preempt_enable().
Similar reasoning rules out use of rcu_read_lock() and rcu_read_unlock().

Another possibility would be to place the trampolines in a known region
of memory, and check for the task's PC being in that region.  This fails
because trampolines can be interrupted, and I vaguely recall something
about them calling function as well.  Stack tracing could be added,
but stack tracing is not as reliable as it would need to be.

The solution chosen relies on the fact that code in trampolines
(and code invoked from trampolines) is not permitted to do voluntary
context switches.  Thus, if a trampoline is removed, and a given task
later does a voluntary context switch (or has been seen in usermode),
that task will never again reference that trampoline.  Once all tasks
are accounted for, the trampoline may safely be removed.

TASKS_RCU implements a flavor of RCU that does exactly this.  It has
only a single use at the moment, but avoiding memory leaks on
production machines being instrumented seems to me to be quite valuable.

So, Steve, please correct any misconceptions!

							Thanx, Paul

Re: Use case for TASKS_RCU

[Steven Rostedt]

On Mon, 15 May 2017 11:23:54 -0700
"Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:

> Hello!
> 
> The question of the use case for TASKS_RCU came up, and here is my
> understanding.  Steve will not be shy about correcting any misconceptions
> I might have.  ;-)
> 
> The use case is to support freeing of trampolines used in tracing/probing
> in CONFIG_PREEMPT=y kernels.  It is necessary to wait until any task
> executing in the trampoline in question has left it, taking into account
> that the trampoline's code might be interrupted and preempted.  However,
> the code in the trampolines is guaranteed never to context switch.

nit, "never to voluntarily context switch" as it can still be
preempted. It should never call schedule nor a mutex. And really it
shouldn't even call any spinlocks. Although, trace_stack does, but it
does so after checking if in_nmi(), which it bails if that is true.

> 
> Note that in CONFIG_PREEMPT=n kernels, synchronize_sched() suffices.
> It is therefore tempting to think in terms of disabling preemption across
> the trampolines, but there is apparently not enough room to accommodate
> the needed preempt_disable() and preempt_enable() in the code invoking
> the trampoline, and putting the preempt_disable() and preempt_enable()
> in the trampoline itself fails because of the possibility of preemption
> just before the preempt_disable() and just after the preempt_enable().
> Similar reasoning rules out use of rcu_read_lock() and rcu_read_unlock().

Correct, as the jump to the trampoline may be preempted. And preemption
happens just before the first instruction on the trampoline is being
executed.


> 
> Another possibility would be to place the trampolines in a known region
> of memory, and check for the task's PC being in that region.  This fails
> because trampolines can be interrupted, and I vaguely recall something
> about them calling function as well.  Stack tracing could be added,
> but stack tracing is not as reliable as it would need to be.

Correct.

> 
> The solution chosen relies on the fact that code in trampolines
> (and code invoked from trampolines) is not permitted to do voluntary
> context switches.  Thus, if a trampoline is removed, and a given task
> later does a voluntary context switch (or has been seen in usermode),
> that task will never again reference that trampoline.  Once all tasks
> are accounted for, the trampoline may safely be removed.

Correct.

> 
> TASKS_RCU implements a flavor of RCU that does exactly this.  It has
> only a single use at the moment, but avoiding memory leaks on
> production machines being instrumented seems to me to be quite valuable.

Optimized kprobes can also benefit from this, as it currently is
disabled on CONFIG_PREEMPT due to exactly the same issue. I'll poke
Masami about this again. I should be seeing him in a couple of weeks at
the Open Source Summit in Tokyo.


> 
> So, Steve, please correct any misconceptions!

Nope, all looks good.

-- Steve

Re: Use case for TASKS_RCU

[Paul E. McKenney]

On Mon, May 15, 2017 at 02:48:10PM -0400, Steven Rostedt wrote:
> On Mon, 15 May 2017 11:23:54 -0700
> "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:
> 
> > Hello!
> > 
> > The question of the use case for TASKS_RCU came up, and here is my
> > understanding.  Steve will not be shy about correcting any misconceptions
> > I might have.  ;-)
> > 
> > The use case is to support freeing of trampolines used in tracing/probing
> > in CONFIG_PREEMPT=y kernels.  It is necessary to wait until any task
> > executing in the trampoline in question has left it, taking into account
> > that the trampoline's code might be interrupted and preempted.  However,
> > the code in the trampolines is guaranteed never to context switch.
> 
> nit, "never to voluntarily context switch" as it can still be
> preempted. It should never call schedule nor a mutex. And really it
> shouldn't even call any spinlocks. Although, trace_stack does, but it
> does so after checking if in_nmi(), which it bails if that is true.

Good catch, thank you!  And thank you for the checking on the rest.

Ingo, thoughts?

							Thanx, Paul

> > Note that in CONFIG_PREEMPT=n kernels, synchronize_sched() suffices.
> > It is therefore tempting to think in terms of disabling preemption across
> > the trampolines, but there is apparently not enough room to accommodate
> > the needed preempt_disable() and preempt_enable() in the code invoking
> > the trampoline, and putting the preempt_disable() and preempt_enable()
> > in the trampoline itself fails because of the possibility of preemption
> > just before the preempt_disable() and just after the preempt_enable().
> > Similar reasoning rules out use of rcu_read_lock() and rcu_read_unlock().
> 
> Correct, as the jump to the trampoline may be preempted. And preemption
> happens just before the first instruction on the trampoline is being
> executed.
> 
> 
> > 
> > Another possibility would be to place the trampolines in a known region
> > of memory, and check for the task's PC being in that region.  This fails
> > because trampolines can be interrupted, and I vaguely recall something
> > about them calling function as well.  Stack tracing could be added,
> > but stack tracing is not as reliable as it would need to be.
> 
> Correct.
> 
> > 
> > The solution chosen relies on the fact that code in trampolines
> > (and code invoked from trampolines) is not permitted to do voluntary
> > context switches.  Thus, if a trampoline is removed, and a given task
> > later does a voluntary context switch (or has been seen in usermode),
> > that task will never again reference that trampoline.  Once all tasks
> > are accounted for, the trampoline may safely be removed.
> 
> Correct.
> 
> > 
> > TASKS_RCU implements a flavor of RCU that does exactly this.  It has
> > only a single use at the moment, but avoiding memory leaks on
> > production machines being instrumented seems to me to be quite valuable.
> 
> Optimized kprobes can also benefit from this, as it currently is
> disabled on CONFIG_PREEMPT due to exactly the same issue. I'll poke
> Masami about this again. I should be seeing him in a couple of weeks at
> the Open Source Summit in Tokyo.
> 
> 
> > 
> > So, Steve, please correct any misconceptions!
> 
> Nope, all looks good.
> 
> -- Steve
> 

Re: Use case for TASKS_RCU

[Ingo Molnar]

* Paul E. McKenney <paulmck@linux.vnet.ibm.com> wrote:

> Hello!
> 
> The question of the use case for TASKS_RCU came up, and here is my
> understanding.  Steve will not be shy about correcting any misconceptions
> I might have.  ;-)
> 
> The use case is to support freeing of trampolines used in tracing/probing
> in CONFIG_PREEMPT=y kernels.  It is necessary to wait until any task
> executing in the trampoline in question has left it, taking into account
> that the trampoline's code might be interrupted and preempted.  However,
> the code in the trampolines is guaranteed never to context switch.
> 
> Note that in CONFIG_PREEMPT=n kernels, synchronize_sched() suffices.
> It is therefore tempting to think in terms of disabling preemption across
> the trampolines, but there is apparently not enough room to accommodate
> the needed preempt_disable() and preempt_enable() in the code invoking
> the trampoline, and putting the preempt_disable() and preempt_enable()
> in the trampoline itself fails because of the possibility of preemption
> just before the preempt_disable() and just after the preempt_enable().
> Similar reasoning rules out use of rcu_read_lock() and rcu_read_unlock().

So how was this solved before TASKS_RCU? Also, nothing uses call_rcu_tasks() at 
the moment, so it's hard for me to review its users. What am I missing?

Thanks,

	Ingo

Re: Use case for TASKS_RCU

[Paul E. McKenney]

On Tue, May 16, 2017 at 08:22:33AM +0200, Ingo Molnar wrote:
> 
> * Paul E. McKenney <paulmck@linux.vnet.ibm.com> wrote:
> 
> > Hello!
> > 
> > The question of the use case for TASKS_RCU came up, and here is my
> > understanding.  Steve will not be shy about correcting any misconceptions
> > I might have.  ;-)
> > 
> > The use case is to support freeing of trampolines used in tracing/probing
> > in CONFIG_PREEMPT=y kernels.  It is necessary to wait until any task
> > executing in the trampoline in question has left it, taking into account
> > that the trampoline's code might be interrupted and preempted.  However,
> > the code in the trampolines is guaranteed never to context switch.
> > 
> > Note that in CONFIG_PREEMPT=n kernels, synchronize_sched() suffices.
> > It is therefore tempting to think in terms of disabling preemption across
> > the trampolines, but there is apparently not enough room to accommodate
> > the needed preempt_disable() and preempt_enable() in the code invoking
> > the trampoline, and putting the preempt_disable() and preempt_enable()
> > in the trampoline itself fails because of the possibility of preemption
> > just before the preempt_disable() and just after the preempt_enable().
> > Similar reasoning rules out use of rcu_read_lock() and rcu_read_unlock().
> 
> So how was this solved before TASKS_RCU? Also, nothing uses call_rcu_tasks() at 
> the moment, so it's hard for me to review its users. What am I missing?

Before TASKS_RCU, the trampolines were just leaked when CONFIG_PREEMPT=y.

Current mainline kernel/trace/ftrace.c uses synchronize_rcu_tasks().
So yes, currently one user.

							Thanx, Paul

Re: Use case for TASKS_RCU

[Steven Rostedt]

On Tue, 16 May 2017 05:23:54 -0700
"Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:

> On Tue, May 16, 2017 at 08:22:33AM +0200, Ingo Molnar wrote:
> > 
> > * Paul E. McKenney <paulmck@linux.vnet.ibm.com> wrote:
> >   
> > > Hello!
> > > 
> > > The question of the use case for TASKS_RCU came up, and here is my
> > > understanding.  Steve will not be shy about correcting any misconceptions
> > > I might have.  ;-)
> > > 
> > > The use case is to support freeing of trampolines used in tracing/probing
> > > in CONFIG_PREEMPT=y kernels.  It is necessary to wait until any task
> > > executing in the trampoline in question has left it, taking into account
> > > that the trampoline's code might be interrupted and preempted.  However,
> > > the code in the trampolines is guaranteed never to context switch.
> > > 
> > > Note that in CONFIG_PREEMPT=n kernels, synchronize_sched() suffices.
> > > It is therefore tempting to think in terms of disabling preemption across
> > > the trampolines, but there is apparently not enough room to accommodate
> > > the needed preempt_disable() and preempt_enable() in the code invoking
> > > the trampoline, and putting the preempt_disable() and preempt_enable()
> > > in the trampoline itself fails because of the possibility of preemption
> > > just before the preempt_disable() and just after the preempt_enable().
> > > Similar reasoning rules out use of rcu_read_lock() and rcu_read_unlock().  
> > 
> > So how was this solved before TASKS_RCU? Also, nothing uses call_rcu_tasks() at 
> > the moment, so it's hard for me to review its users. What am I missing?  
> 
> Before TASKS_RCU, the trampolines were just leaked when CONFIG_PREEMPT=y.

Actually, things simply were not implemented. This is why optimized
kprobes is dependent on !CONFIG_PREEMPT. In fact, we can now optimize
kprobes on CONFIG_PREEMPT with this utility. Right Masami?

With ftrace, perf and other "dynamic" users (where the ftrace_ops was
created via a kmalloc), would not get the benefit of being called
directly. They all needed to have their mcount/fentry's call a static
trampoline that disabled preemption before calling the callback. This
static trampoline is shared by all, so even if perf was the only
callback for the function, it had to call this trampoline that iterated
through all registered ftrace_ops to see which one had a callback for
the given function.

With this utility, perf not only gets the benefit of not having to use
that static loop trampoline, it can even have its own trampoline
created that doesn't even need to do the check if perf wants this
function or not, as the only way the trampoline is called, is if perf
wanted it.

> 
> Current mainline kernel/trace/ftrace.c uses synchronize_rcu_tasks().
> So yes, currently one user.
> 

And the kpatch folks want to use it too.

-- Steve

Re: Use case for TASKS_RCU

[Masami Hiramatsu]

Sorry, I missed this thread,

On Tue, 16 May 2017 09:07:08 -0400
Steven Rostedt <rostedt@goodmis.org> wrote:

> On Tue, 16 May 2017 05:23:54 -0700
> "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:
> 
> > On Tue, May 16, 2017 at 08:22:33AM +0200, Ingo Molnar wrote:
> > > 
> > > * Paul E. McKenney <paulmck@linux.vnet.ibm.com> wrote:
> > >   
> > > > Hello!
> > > > 
> > > > The question of the use case for TASKS_RCU came up, and here is my
> > > > understanding.  Steve will not be shy about correcting any misconceptions
> > > > I might have.  ;-)
> > > > 
> > > > The use case is to support freeing of trampolines used in tracing/probing
> > > > in CONFIG_PREEMPT=y kernels.  It is necessary to wait until any task
> > > > executing in the trampoline in question has left it, taking into account
> > > > that the trampoline's code might be interrupted and preempted.  However,
> > > > the code in the trampolines is guaranteed never to context switch.
> > > > 
> > > > Note that in CONFIG_PREEMPT=n kernels, synchronize_sched() suffices.
> > > > It is therefore tempting to think in terms of disabling preemption across
> > > > the trampolines, but there is apparently not enough room to accommodate
> > > > the needed preempt_disable() and preempt_enable() in the code invoking
> > > > the trampoline, and putting the preempt_disable() and preempt_enable()
> > > > in the trampoline itself fails because of the possibility of preemption
> > > > just before the preempt_disable() and just after the preempt_enable().
> > > > Similar reasoning rules out use of rcu_read_lock() and rcu_read_unlock().  
> > > 
> > > So how was this solved before TASKS_RCU? Also, nothing uses call_rcu_tasks() at 
> > > the moment, so it's hard for me to review its users. What am I missing?  
> > 
> > Before TASKS_RCU, the trampolines were just leaked when CONFIG_PREEMPT=y.
> 
> Actually, things simply were not implemented. This is why optimized
> kprobes is dependent on !CONFIG_PREEMPT. In fact, we can now optimize
> kprobes on CONFIG_PREEMPT with this utility. Right Masami?

Yes, I just haven't implemented it. OK, I'll use synchronize_rcu_tasks.

> With ftrace, perf and other "dynamic" users (where the ftrace_ops was
> created via a kmalloc), would not get the benefit of being called
> directly. They all needed to have their mcount/fentry's call a static
> trampoline that disabled preemption before calling the callback. This
> static trampoline is shared by all, so even if perf was the only
> callback for the function, it had to call this trampoline that iterated
> through all registered ftrace_ops to see which one had a callback for
> the given function.

For the optimized kprobes, it always jumps into dynamically allocated
trampoline, so we have no chance to disable preemption.

Thank you,

> 
> With this utility, perf not only gets the benefit of not having to use
> that static loop trampoline, it can even have its own trampoline
> created that doesn't even need to do the check if perf wants this
> function or not, as the only way the trampoline is called, is if perf
> wanted it.
> 
> > 
> > Current mainline kernel/trace/ftrace.c uses synchronize_rcu_tasks().
> > So yes, currently one user.
> > 
> 
> And the kpatch folks want to use it too.
> 
> -- Steve


-- 
Masami Hiramatsu <mhiramat@kernel.org>

Re: Use case for TASKS_RCU

[Ingo Molnar]

* Paul E. McKenney <paulmck@linux.vnet.ibm.com> wrote:

> On Tue, May 16, 2017 at 08:22:33AM +0200, Ingo Molnar wrote:
> > 
> > * Paul E. McKenney <paulmck@linux.vnet.ibm.com> wrote:
> > 
> > > Hello!
> > > 
> > > The question of the use case for TASKS_RCU came up, and here is my
> > > understanding.  Steve will not be shy about correcting any misconceptions
> > > I might have.  ;-)
> > > 
> > > The use case is to support freeing of trampolines used in tracing/probing
> > > in CONFIG_PREEMPT=y kernels.  It is necessary to wait until any task
> > > executing in the trampoline in question has left it, taking into account
> > > that the trampoline's code might be interrupted and preempted.  However,
> > > the code in the trampolines is guaranteed never to context switch.
> > > 
> > > Note that in CONFIG_PREEMPT=n kernels, synchronize_sched() suffices.
> > > It is therefore tempting to think in terms of disabling preemption across
> > > the trampolines, but there is apparently not enough room to accommodate
> > > the needed preempt_disable() and preempt_enable() in the code invoking
> > > the trampoline, and putting the preempt_disable() and preempt_enable()
> > > in the trampoline itself fails because of the possibility of preemption
> > > just before the preempt_disable() and just after the preempt_enable().
> > > Similar reasoning rules out use of rcu_read_lock() and rcu_read_unlock().
> > 
> > So how was this solved before TASKS_RCU? Also, nothing uses call_rcu_tasks() at 
> > the moment, so it's hard for me to review its users. What am I missing?
> 
> Before TASKS_RCU, the trampolines were just leaked when CONFIG_PREEMPT=y.
> 
> Current mainline kernel/trace/ftrace.c uses synchronize_rcu_tasks().
> So yes, currently one user.

So why not schedule a worklet on every CPU to drive the trampoline freeing? To 
guarantee that nothing was preempted it could run at SCHED_IDLE and could observe 
nr_running from the worklet and use a short timeout loop. Batching and hysteresis 
would ensure that this is only running rarely in practice.

It doesn't have to be fast or particularly elegant, but it could use existing 
kernel facilites just fine: it's a corner case cost and quirk of our live kernel 
text modifying trampoline code and our current CONFIG_PREEMPT=y model.

I.e. don't make it an RCU facility that complicates not just the RCU code but has 
various costs in generic code as well:

kernel/exit.c:  TASKS_RCU(int tasks_rcu_i);
kernel/exit.c:  TASKS_RCU(preempt_disable());
kernel/exit.c:  TASKS_RCU(tasks_rcu_i = __srcu_read_lock(&tasks_rcu_exit_srcu));
kernel/exit.c:  TASKS_RCU(preempt_enable());
kernel/exit.c:  TASKS_RCU(__srcu_read_unlock(&tasks_rcu_exit_srcu, tasks_rcu_i));

I.e. I question that this should be a generic RCU facility.

Thanks,

	Ingo

Re: Use case for TASKS_RCU

[Paul E. McKenney]

On Fri, May 19, 2017 at 08:23:31AM +0200, Ingo Molnar wrote:
> 
> * Paul E. McKenney <paulmck@linux.vnet.ibm.com> wrote:
> 
> > On Tue, May 16, 2017 at 08:22:33AM +0200, Ingo Molnar wrote:
> > > 
> > > * Paul E. McKenney <paulmck@linux.vnet.ibm.com> wrote:
> > > 
> > > > Hello!
> > > > 
> > > > The question of the use case for TASKS_RCU came up, and here is my
> > > > understanding.  Steve will not be shy about correcting any misconceptions
> > > > I might have.  ;-)
> > > > 
> > > > The use case is to support freeing of trampolines used in tracing/probing
> > > > in CONFIG_PREEMPT=y kernels.  It is necessary to wait until any task
> > > > executing in the trampoline in question has left it, taking into account
> > > > that the trampoline's code might be interrupted and preempted.  However,
> > > > the code in the trampolines is guaranteed never to context switch.
> > > > 
> > > > Note that in CONFIG_PREEMPT=n kernels, synchronize_sched() suffices.
> > > > It is therefore tempting to think in terms of disabling preemption across
> > > > the trampolines, but there is apparently not enough room to accommodate
> > > > the needed preempt_disable() and preempt_enable() in the code invoking
> > > > the trampoline, and putting the preempt_disable() and preempt_enable()
> > > > in the trampoline itself fails because of the possibility of preemption
> > > > just before the preempt_disable() and just after the preempt_enable().
> > > > Similar reasoning rules out use of rcu_read_lock() and rcu_read_unlock().
> > > 
> > > So how was this solved before TASKS_RCU? Also, nothing uses call_rcu_tasks() at 
> > > the moment, so it's hard for me to review its users. What am I missing?
> > 
> > Before TASKS_RCU, the trampolines were just leaked when CONFIG_PREEMPT=y.
> > 
> > Current mainline kernel/trace/ftrace.c uses synchronize_rcu_tasks().
> > So yes, currently one user.
> 
> So why not schedule a worklet on every CPU to drive the trampoline freeing? To 
> guarantee that nothing was preempted it could run at SCHED_IDLE and could observe 
> nr_running from the worklet and use a short timeout loop. Batching and hysteresis 
> would ensure that this is only running rarely in practice.
> 
> It doesn't have to be fast or particularly elegant, but it could use existing 
> kernel facilites just fine: it's a corner case cost and quirk of our live kernel 
> text modifying trampoline code and our current CONFIG_PREEMPT=y model.
> 
> I.e. don't make it an RCU facility that complicates not just the RCU code but has 
> various costs in generic code as well:
> 
> kernel/exit.c:  TASKS_RCU(int tasks_rcu_i);
> kernel/exit.c:  TASKS_RCU(preempt_disable());
> kernel/exit.c:  TASKS_RCU(tasks_rcu_i = __srcu_read_lock(&tasks_rcu_exit_srcu));
> kernel/exit.c:  TASKS_RCU(preempt_enable());
> kernel/exit.c:  TASKS_RCU(__srcu_read_unlock(&tasks_rcu_exit_srcu, tasks_rcu_i));
> 
> I.e. I question that this should be a generic RCU facility.

Simpler would be better!

However, is it really guaranteed that one SCHED_IDLE thread cannot
preempt another?  If not, then the trampoline-freeing SCHED_IDLE thread
might preempt some other SCHED_IDLE thread in the middle of a trampoline.
I am not seeing anything that prevents such preemption, but it is rather
early local time, so I could easily be missing something.

However, if SCHED_IDLE threads cannot preempt other threads, even other
SCHED_IDLE threads, then your approach sounds quite promising to me.

Steve, Peter, thoughts?

							Thanx, Paul

Re: Use case for TASKS_RCU

[Steven Rostedt]

On Fri, 19 May 2017 06:35:50 -0700
"Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:

> Simpler would be better!
> 
> However, is it really guaranteed that one SCHED_IDLE thread cannot
> preempt another?  If not, then the trampoline-freeing SCHED_IDLE thread
> might preempt some other SCHED_IDLE thread in the middle of a trampoline.
> I am not seeing anything that prevents such preemption, but it is rather
> early local time, so I could easily be missing something.
> 
> However, if SCHED_IDLE threads cannot preempt other threads, even other
> SCHED_IDLE threads, then your approach sounds quite promising to me.
> 
> Steve, Peter, thoughts?

SCHED_IDLE is the swapper task. There's one on each CPU, and they don't
migrate. And they only get called when there's no other task running.

My worry is that if you have a busy CPU, then this will never finish,
as the idle task can be preempted forever. That would cause this to
never return:

  perf record -e ftrace:function sleep 1

That may never exit when it finishes, because the call to
unregister_ftrace_function() wont return till schedule_rcu_tasks()
returns. And worse yet, that is TASK_UNINTERRUPTIBLE state, where not
even a ctrl-C will stop it. It could possibly also trigger a hung task
warning.

-- Steve

Re: Use case for TASKS_RCU

[Steven Rostedt]

On Fri, 19 May 2017 10:04:21 -0400
Steven Rostedt <rostedt@goodmis.org> wrote:

> On Fri, 19 May 2017 06:35:50 -0700
> "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:
> 
> > Simpler would be better!
> > 
> > However, is it really guaranteed that one SCHED_IDLE thread cannot
> > preempt another?  If not, then the trampoline-freeing SCHED_IDLE thread
> > might preempt some other SCHED_IDLE thread in the middle of a trampoline.
> > I am not seeing anything that prevents such preemption, but it is rather
> > early local time, so I could easily be missing something.
> > 
> > However, if SCHED_IDLE threads cannot preempt other threads, even other
> > SCHED_IDLE threads, then your approach sounds quite promising to me.
> > 
> > Steve, Peter, thoughts?  
> 
> SCHED_IDLE is the swapper task. There's one on each CPU, and they don't
> migrate. And they only get called when there's no other task running.

Peter just "schooled" me on IRC. I stand corrected (and he may respond
to this email too). I guess any task can become SCHED_IDLE.

But that just makes this an even less likely option for
synchronize_rcu_tasks().

-- Steve

Re: Use case for TASKS_RCU

[Paul E. McKenney]

On Fri, May 19, 2017 at 10:23:31AM -0400, Steven Rostedt wrote:
> On Fri, 19 May 2017 10:04:21 -0400
> Steven Rostedt <rostedt@goodmis.org> wrote:
> 
> > On Fri, 19 May 2017 06:35:50 -0700
> > "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:
> > 
> > > Simpler would be better!
> > > 
> > > However, is it really guaranteed that one SCHED_IDLE thread cannot
> > > preempt another?  If not, then the trampoline-freeing SCHED_IDLE thread
> > > might preempt some other SCHED_IDLE thread in the middle of a trampoline.
> > > I am not seeing anything that prevents such preemption, but it is rather
> > > early local time, so I could easily be missing something.
> > > 
> > > However, if SCHED_IDLE threads cannot preempt other threads, even other
> > > SCHED_IDLE threads, then your approach sounds quite promising to me.
> > > 
> > > Steve, Peter, thoughts?  
> > 
> > SCHED_IDLE is the swapper task. There's one on each CPU, and they don't
> > migrate. And they only get called when there's no other task running.
> 
> Peter just "schooled" me on IRC. I stand corrected (and he may respond
> to this email too). I guess any task can become SCHED_IDLE.
> 
> But that just makes this an even less likely option for
> synchronize_rcu_tasks().

Hmmm...  The goal is to make sure that any task that was preempted or
running at a given point in time passes through a voluntary context switch
(or userspace execution, or, ...).

What is the simplest way to get this job done?  To Ingo's point, I bet
that there is a simpler way than the current TASKS_RCU implementation.

Ingo, if I make it fit into 100 lines of code, would you be OK with it?
I probably need a one-line hook at task-creation time and another
at task-exit time, if that makes a difference.

							Thanx, Paul

Re: Use case for TASKS_RCU

[Paul E. McKenney]

On Fri, May 19, 2017 at 12:06:09PM -0700, Paul E. McKenney wrote:
> On Fri, May 19, 2017 at 10:23:31AM -0400, Steven Rostedt wrote:
> > On Fri, 19 May 2017 10:04:21 -0400
> > Steven Rostedt <rostedt@goodmis.org> wrote:
> > 
> > > On Fri, 19 May 2017 06:35:50 -0700
> > > "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:
> > > 
> > > > Simpler would be better!
> > > > 
> > > > However, is it really guaranteed that one SCHED_IDLE thread cannot
> > > > preempt another?  If not, then the trampoline-freeing SCHED_IDLE thread
> > > > might preempt some other SCHED_IDLE thread in the middle of a trampoline.
> > > > I am not seeing anything that prevents such preemption, but it is rather
> > > > early local time, so I could easily be missing something.
> > > > 
> > > > However, if SCHED_IDLE threads cannot preempt other threads, even other
> > > > SCHED_IDLE threads, then your approach sounds quite promising to me.
> > > > 
> > > > Steve, Peter, thoughts?  
> > > 
> > > SCHED_IDLE is the swapper task. There's one on each CPU, and they don't
> > > migrate. And they only get called when there's no other task running.
> > 
> > Peter just "schooled" me on IRC. I stand corrected (and he may respond
> > to this email too). I guess any task can become SCHED_IDLE.
> > 
> > But that just makes this an even less likely option for
> > synchronize_rcu_tasks().
> 
> Hmmm...  The goal is to make sure that any task that was preempted or
> running at a given point in time passes through a voluntary context switch
> (or userspace execution, or, ...).
> 
> What is the simplest way to get this job done?  To Ingo's point, I bet
> that there is a simpler way than the current TASKS_RCU implementation.
> 
> Ingo, if I make it fit into 100 lines of code, would you be OK with it?
> I probably need a one-line hook at task-creation time and another
> at task-exit time, if that makes a difference.

And please see below for such a patch, which does add (just barely)
fewer than 100 lines net.

Unfortunately, it does not work, as I should have known ahead of time
from the dyntick-idle experience.  Not all context switches go through
context_switch().  :-/

I believe this is fixable, more or less like dyntick-idle's half-interrupts
were fixable, but it will likely be a few days.  Not clear whether the
result will be simpler than current TASKS_RCU, but there is only one
way to find out.  ;-)

							Thanx, Paul

------------------------------------------------------------------------

 include/linux/init_task.h |    7 +++++
 include/linux/rcupdate.h  |   12 ++++++++++
 include/linux/sched.h     |    5 ++++
 kernel/fork.c             |    4 +++
 kernel/rcu/Kconfig        |    8 +++---
 kernel/rcu/Kconfig.debug  |    2 -
 kernel/rcu/tree.c         |   15 +++++++++---
 kernel/rcu/tree_plugin.h  |   55 ++++++++++++++++++++++++++++++++++++++++++++++
 kernel/sched/core.c       |    3 ++
 9 files changed, 101 insertions(+), 10 deletions(-)

commit 25cb9b6882542f3db0242f6556b94e139c4b29d5
Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Date:   Mon May 22 08:55:01 2017 -0700

    rcu: Provide simplified RCU-tasks implementation
    
    This commit provides a simplified RCU-tasks implementation in terms of
    SRCU for CONFIG_PREEMPT=y kernels and in terms of RCU-sched otherwise.
    The RCU-sched approach simply maps synchronize_rcu_tasks() directly onto
    synchronize_sched().
    
    The SRCU approach provides a tasks_srcu srcu_struct structure that
    tracks usermode execution and voluntary context switches.  When each
    task is created, it invokes tasks_rcu_qs_exit() and when each task exits
    it invokes tasks_rcu_qs_enter().  On context switch, tasks_rcu_qs_exit()
    is invoked for the incoming task, but only if that task is resuming from a
    voluntary context switch.  If the current context switch is a preemption,
    tasks_rcu_qs_enter() is invoked for the outgoing tasks, and either way
    the preempt-or-not state is recorded for the task's next resumption.
    A "context switch" that keeps the same task invokes tasks_rcu_qs().
    
    If the scheduling-clock interrupt sees a task in usermode, it invokes
    tasks_rcu_qs().  It is normally unsafe to do SRCU read-side operations
    from interrupt, but in this case, usermode was interrupted, so there is
    no chance of having interrupted another SRCU read-side operation.
    
    Given all this, synchronize_srcu(&tasks_srcu) waits for all tasks to
    be seen voluntarily blocked or in user space.  This means that
    synchronize_rcu_tasks() is a one-line function.
    
    Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index bd11d33d48cc..631f3d3f2dc3 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -140,6 +140,13 @@ extern struct group_info init_groups;
 #else
 #define INIT_TASK_RCU_PREEMPT(tsk)
 #endif
+#ifdef CONFIG_TASKS_RCU
+#define INIT_TASK_RCU_TASKS(tsk)					\
+	.rcu_tasks_idx = 0,						\
+	.rcu_tasks_preempt = false,
+#else /* #ifdef CONFIG_TASKS_RCU */
+#define INIT_TASK_RCU_TASKS(tsk)
+#endif /* #else #ifdef CONFIG_TASKS_RCU */
 
 extern struct cred init_cred;
 
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 5088a44ce99c..1b2f104a467f 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -156,6 +156,18 @@ static inline void rcu_init_nohz(void) { }
 		rcu_irq_exit_irqson(); \
 	} while (0)
 
+#ifdef CONFIG_TASKS_RCU
+void tasks_rcu_qs(bool preempt);
+void tasks_rcu_qs_enter(struct task_struct *t, bool preempt);
+void tasks_rcu_qs_exit(struct task_struct *t);
+void synchronize_rcu_tasks(void);
+#else /* #ifdef CONFIG_TASKS_RCU */
+static inline void tasks_rcu_qs(bool preempt) { }
+static inline void tasks_rcu_qs_enter(struct task_struct *t, bool preempt) { }
+static inline void tasks_rcu_qs_exit(struct task_struct *t) { }
+static inline void synchronize_rcu_tasks(void) { synchronize_sched(); }
+#endif /* #else #ifdef CONFIG_TASKS_RCU */
+
 /**
  * cond_resched_rcu_qs - Report potential quiescent states to RCU
  *
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 3b7d9aa80349..1e5d27d1e885 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -544,6 +544,11 @@ struct task_struct {
 	struct rcu_node			*rcu_blocked_node;
 #endif /* #ifdef CONFIG_PREEMPT_RCU */
 
+#ifdef CONFIG_TASKS_RCU
+	u8				rcu_tasks_idx;
+	u8				rcu_tasks_preempt;
+#endif /* #ifdef CONFIG_TASKS_RCU */
+
 	struct sched_info		sched_info;
 
 	struct list_head		tasks;
diff --git a/kernel/fork.c b/kernel/fork.c
index 1784f49b0cd4..8767d739eed4 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1498,6 +1498,10 @@ static inline void rcu_copy_process(struct task_struct *p)
 	p->rcu_blocked_node = NULL;
 	INIT_LIST_HEAD(&p->rcu_node_entry);
 #endif /* #ifdef CONFIG_PREEMPT_RCU */
+#ifdef CONFIG_TASKS_RCU
+	p->rcu_tasks_preempt = false;
+	tasks_rcu_qs_exit(p);
+#endif /* #ifdef CONFIG_TASKS_RCU */
 }
 
 /*
diff --git a/kernel/rcu/Kconfig b/kernel/rcu/Kconfig
index be90c945063f..3077568930f3 100644
--- a/kernel/rcu/Kconfig
+++ b/kernel/rcu/Kconfig
@@ -69,13 +69,13 @@ config TREE_SRCU
 	  This option selects the full-fledged version of SRCU.
 
 config TASKS_RCU
-	bool
-	default n
+	def_bool PREEMPT_RCU
 	select SRCU
 	help
 	  This option enables a task-based RCU implementation that uses
-	  only voluntary context switch (not preemption!), idle, and
-	  user-mode execution as quiescent states.
+	  only voluntary context switch (not preemption!) and user-mode
+	  execution as quiescent states.  For !PREEMPT_RCU kernels,
+	  synchronize_tasks_rcu() maps to synchronize_sched().
 
 config RCU_STALL_COMMON
 	def_bool ( TREE_RCU || PREEMPT_RCU )
diff --git a/kernel/rcu/Kconfig.debug b/kernel/rcu/Kconfig.debug
index 0ec7d1d33a14..b6619ceedafc 100644
--- a/kernel/rcu/Kconfig.debug
+++ b/kernel/rcu/Kconfig.debug
@@ -16,7 +16,6 @@ config RCU_PERF_TEST
 	depends on DEBUG_KERNEL
 	select TORTURE_TEST
 	select SRCU
-	select TASKS_RCU
 	default n
 	help
 	  This option provides a kernel module that runs performance
@@ -33,7 +32,6 @@ config RCU_TORTURE_TEST
 	depends on DEBUG_KERNEL
 	select TORTURE_TEST
 	select SRCU
-	select TASKS_RCU
 	default n
 	help
 	  This option provides a kernel module that runs torture tests
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index 8008541b04f2..05e7abecde68 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -166,6 +166,7 @@ static void invoke_rcu_callbacks(struct rcu_state *rsp, struct rcu_data *rdp);
 static void rcu_report_exp_rdp(struct rcu_state *rsp,
 			       struct rcu_data *rdp, bool wake);
 static void sync_sched_exp_online_cleanup(int cpu);
+static void rcu_all_qs_ctxt(bool ctxt);
 
 /* rcuc/rcub kthread realtime priority */
 static int kthread_prio = IS_ENABLED(CONFIG_RCU_BOOST) ? 1 : 0;
@@ -467,7 +468,7 @@ void rcu_note_context_switch(bool preempt)
 		rcu_momentary_dyntick_idle();
 	this_cpu_inc(rcu_dynticks.rcu_qs_ctr);
 	if (!preempt)
-		rcu_all_qs();
+		rcu_all_qs_ctxt(true);
 out:
 	trace_rcu_utilization(TPS("End context switch"));
 	barrier(); /* Avoid RCU read-side critical sections leaking up. */
@@ -480,14 +481,13 @@ EXPORT_SYMBOL_GPL(rcu_note_context_switch);
  * dyntick-idle quiescent state visible to other CPUs (but only for those
  * RCU flavors in desperate need of a quiescent state, which will normally
  * be none of them).  Either way, do a lightweight quiescent state for
- * all RCU flavors.
+ * all RCU flavors.  If ctxt is false, also to tasks-RCU quiescent state.
  *
  * The barrier() calls are redundant in the common case when this is
  * called externally, but just in case this is called from within this
  * file.
- *
  */
-void rcu_all_qs(void)
+static void rcu_all_qs_ctxt(bool ctxt)
 {
 	unsigned long flags;
 
@@ -509,9 +509,16 @@ void rcu_all_qs(void)
 	if (unlikely(raw_cpu_read(rcu_sched_data.cpu_no_qs.b.exp)))
 		rcu_sched_qs();
 	this_cpu_inc(rcu_dynticks.rcu_qs_ctr);
+	if (!ctxt)
+		tasks_rcu_qs(false);
 	barrier(); /* Avoid RCU read-side critical sections leaking up. */
 	preempt_enable();
 }
+
+void rcu_all_qs(void)
+{
+	rcu_all_qs_ctxt(false);
+}
 EXPORT_SYMBOL_GPL(rcu_all_qs);
 
 #define DEFAULT_RCU_BLIMIT 10     /* Maximum callbacks per rcu_do_batch. */
diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h
index d7325553cf82..21b254dd28b8 100644
--- a/kernel/rcu/tree_plugin.h
+++ b/kernel/rcu/tree_plugin.h
@@ -783,6 +783,7 @@ void exit_rcu(void)
 	barrier();
 	t->rcu_read_unlock_special.b.blocked = true;
 	__rcu_read_unlock();
+	tasks_rcu_qs_enter(t, false);
 }
 
 #else /* #ifdef CONFIG_PREEMPT_RCU */
@@ -2597,3 +2598,57 @@ static void rcu_bind_gp_kthread(void)
 		return;
 	housekeeping_affine(current);
 }
+
+#ifdef CONFIG_TASKS_RCU
+
+DEFINE_STATIC_SRCU(tasks_srcu);
+
+/* Record a momentary RCU-tasks quiescent state. */
+void tasks_rcu_qs(bool preempt)
+{
+	int idx;
+
+	if (preempt || is_idle_task(current))
+		return;  /* Preempted, not a quiescent state. */
+	/* Acquire new before releasing old to allow tracing SRCU. */
+	preempt_disable();
+	idx = __srcu_read_lock(&tasks_srcu);
+	__srcu_read_unlock(&tasks_srcu, current->rcu_tasks_idx);
+	current->rcu_tasks_idx = idx;
+	preempt_enable();
+}
+
+/* Record entering an extended RCU-tasks quiescent state. */
+void tasks_rcu_qs_enter(struct task_struct *t, bool preempt)
+{
+	t->rcu_tasks_preempt = preempt;
+	if (preempt || is_idle_task(t))
+		return;  /* Preempted, not a quiescent state. */
+	preempt_disable();
+	__srcu_read_unlock(&tasks_srcu, t->rcu_tasks_idx);
+	preempt_enable();
+}
+
+/* Record exiting an extended RCU-tasks quiescent state. */
+void tasks_rcu_qs_exit(struct task_struct *t)
+{
+	if (t->rcu_tasks_preempt || is_idle_task(t))
+		return;  /* Preempted, not a quiescent state. */
+	preempt_disable();
+	t->rcu_tasks_idx = __srcu_read_lock(&tasks_srcu);
+	preempt_enable();
+}
+
+/**
+ * synchronize_rcu_tasks - Wait for all tasks to voluntarily leave the kernel
+ *
+ * Waits until each task is either voluntarily blocked, running in
+ * userspace, or has offered to block (as in cond_resched_rcu_qs()).
+ * Idle tasks are ignored.
+ */
+void synchronize_rcu_tasks(void)
+{
+	synchronize_srcu(&tasks_srcu);
+}
+
+#endif /* #ifdef CONFIG_TASKS_RCU */
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 75353aa53ae3..1ba79734377f 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -3430,6 +3430,7 @@ static void __sched notrace __schedule(bool preempt)
 	clear_preempt_need_resched();
 
 	if (likely(prev != next)) {
+		tasks_rcu_qs_exit(next);
 		rq->nr_switches++;
 		rq->curr = next;
 		++*switch_count;
@@ -3438,9 +3439,11 @@ static void __sched notrace __schedule(bool preempt)
 
 		/* Also unlocks the rq: */
 		rq = context_switch(rq, prev, next, &rf);
+		tasks_rcu_qs_enter(prev, preempt);
 	} else {
 		rq->clock_update_flags &= ~(RQCF_ACT_SKIP|RQCF_REQ_SKIP);
 		rq_unlock_irq(rq, &rf);
+		tasks_rcu_qs(preempt);
 	}
 
 	balance_callback(rq);

Re: Use case for TASKS_RCU

[Steven Rostedt]

On Mon, 22 May 2017 17:00:36 -0700
"Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:

> On Fri, May 19, 2017 at 12:06:09PM -0700, Paul E. McKenney wrote:
> > On Fri, May 19, 2017 at 10:23:31AM -0400, Steven Rostedt wrote:  
> > > On Fri, 19 May 2017 10:04:21 -0400
> > > Steven Rostedt <rostedt@goodmis.org> wrote:
> > >   
> > > > On Fri, 19 May 2017 06:35:50 -0700
> > > > "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:
> > > >   
> > > > > Simpler would be better!
> > > > > 
> > > > > However, is it really guaranteed that one SCHED_IDLE thread
> > > > > cannot preempt another?  If not, then the trampoline-freeing
> > > > > SCHED_IDLE thread might preempt some other SCHED_IDLE thread
> > > > > in the middle of a trampoline. I am not seeing anything that
> > > > > prevents such preemption, but it is rather early local time,
> > > > > so I could easily be missing something.
> > > > > 
> > > > > However, if SCHED_IDLE threads cannot preempt other threads,
> > > > > even other SCHED_IDLE threads, then your approach sounds
> > > > > quite promising to me.
> > > > > 
> > > > > Steve, Peter, thoughts?    
> > > > 
> > > > SCHED_IDLE is the swapper task. There's one on each CPU, and
> > > > they don't migrate. And they only get called when there's no
> > > > other task running.  
> > > 
> > > Peter just "schooled" me on IRC. I stand corrected (and he may
> > > respond to this email too). I guess any task can become
> > > SCHED_IDLE.
> > > 
> > > But that just makes this an even less likely option for
> > > synchronize_rcu_tasks().  
> > 
> > Hmmm...  The goal is to make sure that any task that was preempted
> > or running at a given point in time passes through a voluntary
> > context switch (or userspace execution, or, ...).
> > 
> > What is the simplest way to get this job done?  To Ingo's point, I
> > bet that there is a simpler way than the current TASKS_RCU
> > implementation.
> > 
> > Ingo, if I make it fit into 100 lines of code, would you be OK with
> > it? I probably need a one-line hook at task-creation time and
> > another at task-exit time, if that makes a difference.  
> 
> And please see below for such a patch, which does add (just barely)
> fewer than 100 lines net.
> 
> Unfortunately, it does not work, as I should have known ahead of time
> from the dyntick-idle experience.  Not all context switches go through
> context_switch().  :-/
> 
> I believe this is fixable, more or less like dyntick-idle's
> half-interrupts were fixable, but it will likely be a few days.  Not
> clear whether the result will be simpler than current TASKS_RCU, but
> there is only one way to find out.  ;-)
> 


Hi Paul,

I'm currently traveling and don't have the energy to look at code at
the moment. Hopefully, I can look at this more on Thursday or Friday.

Thanks!

-- Steve

Re: Use case for TASKS_RCU

[Paul E. McKenney]

On Tue, May 23, 2017 at 01:19:58AM -0400, Steven Rostedt wrote:
> On Mon, 22 May 2017 17:00:36 -0700
> "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:
> 
> > On Fri, May 19, 2017 at 12:06:09PM -0700, Paul E. McKenney wrote:
> > > On Fri, May 19, 2017 at 10:23:31AM -0400, Steven Rostedt wrote:  
> > > > On Fri, 19 May 2017 10:04:21 -0400
> > > > Steven Rostedt <rostedt@goodmis.org> wrote:
> > > >   
> > > > > On Fri, 19 May 2017 06:35:50 -0700
> > > > > "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:
> > > > >   
> > > > > > Simpler would be better!
> > > > > > 
> > > > > > However, is it really guaranteed that one SCHED_IDLE thread
> > > > > > cannot preempt another?  If not, then the trampoline-freeing
> > > > > > SCHED_IDLE thread might preempt some other SCHED_IDLE thread
> > > > > > in the middle of a trampoline. I am not seeing anything that
> > > > > > prevents such preemption, but it is rather early local time,
> > > > > > so I could easily be missing something.
> > > > > > 
> > > > > > However, if SCHED_IDLE threads cannot preempt other threads,
> > > > > > even other SCHED_IDLE threads, then your approach sounds
> > > > > > quite promising to me.
> > > > > > 
> > > > > > Steve, Peter, thoughts?    
> > > > > 
> > > > > SCHED_IDLE is the swapper task. There's one on each CPU, and
> > > > > they don't migrate. And they only get called when there's no
> > > > > other task running.  
> > > > 
> > > > Peter just "schooled" me on IRC. I stand corrected (and he may
> > > > respond to this email too). I guess any task can become
> > > > SCHED_IDLE.
> > > > 
> > > > But that just makes this an even less likely option for
> > > > synchronize_rcu_tasks().  
> > > 
> > > Hmmm...  The goal is to make sure that any task that was preempted
> > > or running at a given point in time passes through a voluntary
> > > context switch (or userspace execution, or, ...).
> > > 
> > > What is the simplest way to get this job done?  To Ingo's point, I
> > > bet that there is a simpler way than the current TASKS_RCU
> > > implementation.
> > > 
> > > Ingo, if I make it fit into 100 lines of code, would you be OK with
> > > it? I probably need a one-line hook at task-creation time and
> > > another at task-exit time, if that makes a difference.  
> > 
> > And please see below for such a patch, which does add (just barely)
> > fewer than 100 lines net.
> > 
> > Unfortunately, it does not work, as I should have known ahead of time
> > from the dyntick-idle experience.  Not all context switches go through
> > context_switch().  :-/
> > 
> > I believe this is fixable, more or less like dyntick-idle's
> > half-interrupts were fixable, but it will likely be a few days.  Not
> > clear whether the result will be simpler than current TASKS_RCU, but
> > there is only one way to find out.  ;-)
> 
> Hi Paul,
> 
> I'm currently traveling and don't have the energy to look at code at
> the moment. Hopefully, I can look at this more on Thursday or Friday.

Hello, Steven,

No problem, as I learned that my analogy to dyntick-idle's half-interrupts
fails.  If a given task exits an extended quiescent twice in a row, the
grace period was extended longer than it had to be, but no harm done.
The updated patch below handles this case.

But it turns out that tasks also enter extended quiescent states twice
in a row (from the perspective of context_switch()), which can result
in a too-short grace period.

So the only way that this general approach will work is to identify each
and every context-switch "sneak path" in each and every architecture,
which will be more complex than the current mainline RCU-tasks code.

So I am putting this on the back burner for the moment.  If anyone has
any ideas for a simple solution, please don't keep them a secret!

						Thanx, Paul

-----------------------------------------------------------------------

commit 71f0a84ceeb228789a09192901ddf3c7210c85ee
Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Date:   Mon May 22 08:55:01 2017 -0700

    rcu: Provide simplified RCU-tasks implementation
    
    This commit provides a simplified RCU-tasks implementation in terms of
    SRCU for CONFIG_PREEMPT=y kernels and in terms of RCU-sched otherwise.
    The RCU-sched approach simply maps synchronize_rcu_tasks() directly onto
    synchronize_sched().
    
    The SRCU approach provides a tasks_srcu srcu_struct structure that
    tracks usermode execution and voluntary context switches.  When each
    task is created, it invokes tasks_rcu_qs_exit() and when each task exits
    it invokes tasks_rcu_qs_enter().  On context switch, tasks_rcu_qs_exit()
    is invoked for the incoming task, but only if that task is resuming from a
    voluntary context switch.  If the current context switch is a preemption,
    tasks_rcu_qs_enter() is invoked for the outgoing tasks, and either way
    the preempt-or-not state is recorded for the task's next resumption.
    A "context switch" that keeps the same task invokes tasks_rcu_qs().
    
    If the scheduling-clock interrupt sees a task in usermode, it invokes
    tasks_rcu_qs().  It is normally unsafe to do SRCU read-side operations
    from interrupt, but in this case, usermode was interrupted, so there is
    no chance of having interrupted another SRCU read-side operation.
    
    Given all this, synchronize_srcu(&tasks_srcu) waits for all tasks to
    be seen voluntarily blocked or in user space.  This means that
    synchronize_rcu_tasks() is a one-line function.
    
    Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index bd11d33d48cc..d7700d969b8c 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -140,6 +140,14 @@ extern struct group_info init_groups;
 #else
 #define INIT_TASK_RCU_PREEMPT(tsk)
 #endif
+#ifdef CONFIG_TASKS_RCU
+#define INIT_TASK_RCU_TASKS(tsk)					\
+	.rcu_tasks_idx = 0,						\
+	.rcu_tasks_preempt = false,					\
+	.rcu_tasks_qs = false,
+#else /* #ifdef CONFIG_TASKS_RCU */
+#define INIT_TASK_RCU_TASKS(tsk)
+#endif /* #else #ifdef CONFIG_TASKS_RCU */
 
 extern struct cred init_cred;
 
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 5088a44ce99c..1b2f104a467f 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -156,6 +156,18 @@ static inline void rcu_init_nohz(void) { }
 		rcu_irq_exit_irqson(); \
 	} while (0)
 
+#ifdef CONFIG_TASKS_RCU
+void tasks_rcu_qs(bool preempt);
+void tasks_rcu_qs_enter(struct task_struct *t, bool preempt);
+void tasks_rcu_qs_exit(struct task_struct *t);
+void synchronize_rcu_tasks(void);
+#else /* #ifdef CONFIG_TASKS_RCU */
+static inline void tasks_rcu_qs(bool preempt) { }
+static inline void tasks_rcu_qs_enter(struct task_struct *t, bool preempt) { }
+static inline void tasks_rcu_qs_exit(struct task_struct *t) { }
+static inline void synchronize_rcu_tasks(void) { synchronize_sched(); }
+#endif /* #else #ifdef CONFIG_TASKS_RCU */
+
 /**
  * cond_resched_rcu_qs - Report potential quiescent states to RCU
  *
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 3b7d9aa80349..2c1862c9e7fb 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -544,6 +544,12 @@ struct task_struct {
 	struct rcu_node			*rcu_blocked_node;
 #endif /* #ifdef CONFIG_PREEMPT_RCU */
 
+#ifdef CONFIG_TASKS_RCU
+	u8				rcu_tasks_idx;
+	u8				rcu_tasks_preempt;
+	u8				rcu_tasks_qs;
+#endif /* #ifdef CONFIG_TASKS_RCU */
+
 	struct sched_info		sched_info;
 
 	struct list_head		tasks;
diff --git a/kernel/fork.c b/kernel/fork.c
index 1784f49b0cd4..d1ec804eb4f9 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1498,6 +1498,11 @@ static inline void rcu_copy_process(struct task_struct *p)
 	p->rcu_blocked_node = NULL;
 	INIT_LIST_HEAD(&p->rcu_node_entry);
 #endif /* #ifdef CONFIG_PREEMPT_RCU */
+#ifdef CONFIG_TASKS_RCU
+	p->rcu_tasks_preempt = false;
+	p->rcu_tasks_qs = true;
+	tasks_rcu_qs_exit(p);
+#endif /* #ifdef CONFIG_TASKS_RCU */
 }
 
 /*
diff --git a/kernel/rcu/Kconfig b/kernel/rcu/Kconfig
index be90c945063f..3077568930f3 100644
--- a/kernel/rcu/Kconfig
+++ b/kernel/rcu/Kconfig
@@ -69,13 +69,13 @@ config TREE_SRCU
 	  This option selects the full-fledged version of SRCU.
 
 config TASKS_RCU
-	bool
-	default n
+	def_bool PREEMPT_RCU
 	select SRCU
 	help
 	  This option enables a task-based RCU implementation that uses
-	  only voluntary context switch (not preemption!), idle, and
-	  user-mode execution as quiescent states.
+	  only voluntary context switch (not preemption!) and user-mode
+	  execution as quiescent states.  For !PREEMPT_RCU kernels,
+	  synchronize_tasks_rcu() maps to synchronize_sched().
 
 config RCU_STALL_COMMON
 	def_bool ( TREE_RCU || PREEMPT_RCU )
diff --git a/kernel/rcu/Kconfig.debug b/kernel/rcu/Kconfig.debug
index 0ec7d1d33a14..b6619ceedafc 100644
--- a/kernel/rcu/Kconfig.debug
+++ b/kernel/rcu/Kconfig.debug
@@ -16,7 +16,6 @@ config RCU_PERF_TEST
 	depends on DEBUG_KERNEL
 	select TORTURE_TEST
 	select SRCU
-	select TASKS_RCU
 	default n
 	help
 	  This option provides a kernel module that runs performance
@@ -33,7 +32,6 @@ config RCU_TORTURE_TEST
 	depends on DEBUG_KERNEL
 	select TORTURE_TEST
 	select SRCU
-	select TASKS_RCU
 	default n
 	help
 	  This option provides a kernel module that runs torture tests
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index 8008541b04f2..05e7abecde68 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -166,6 +166,7 @@ static void invoke_rcu_callbacks(struct rcu_state *rsp, struct rcu_data *rdp);
 static void rcu_report_exp_rdp(struct rcu_state *rsp,
 			       struct rcu_data *rdp, bool wake);
 static void sync_sched_exp_online_cleanup(int cpu);
+static void rcu_all_qs_ctxt(bool ctxt);
 
 /* rcuc/rcub kthread realtime priority */
 static int kthread_prio = IS_ENABLED(CONFIG_RCU_BOOST) ? 1 : 0;
@@ -467,7 +468,7 @@ void rcu_note_context_switch(bool preempt)
 		rcu_momentary_dyntick_idle();
 	this_cpu_inc(rcu_dynticks.rcu_qs_ctr);
 	if (!preempt)
-		rcu_all_qs();
+		rcu_all_qs_ctxt(true);
 out:
 	trace_rcu_utilization(TPS("End context switch"));
 	barrier(); /* Avoid RCU read-side critical sections leaking up. */
@@ -480,14 +481,13 @@ EXPORT_SYMBOL_GPL(rcu_note_context_switch);
  * dyntick-idle quiescent state visible to other CPUs (but only for those
  * RCU flavors in desperate need of a quiescent state, which will normally
  * be none of them).  Either way, do a lightweight quiescent state for
- * all RCU flavors.
+ * all RCU flavors.  If ctxt is false, also to tasks-RCU quiescent state.
  *
  * The barrier() calls are redundant in the common case when this is
  * called externally, but just in case this is called from within this
  * file.
- *
  */
-void rcu_all_qs(void)
+static void rcu_all_qs_ctxt(bool ctxt)
 {
 	unsigned long flags;
 
@@ -509,9 +509,16 @@ void rcu_all_qs(void)
 	if (unlikely(raw_cpu_read(rcu_sched_data.cpu_no_qs.b.exp)))
 		rcu_sched_qs();
 	this_cpu_inc(rcu_dynticks.rcu_qs_ctr);
+	if (!ctxt)
+		tasks_rcu_qs(false);
 	barrier(); /* Avoid RCU read-side critical sections leaking up. */
 	preempt_enable();
 }
+
+void rcu_all_qs(void)
+{
+	rcu_all_qs_ctxt(false);
+}
 EXPORT_SYMBOL_GPL(rcu_all_qs);
 
 #define DEFAULT_RCU_BLIMIT 10     /* Maximum callbacks per rcu_do_batch. */
diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h
index d7325553cf82..454882ed03c5 100644
--- a/kernel/rcu/tree_plugin.h
+++ b/kernel/rcu/tree_plugin.h
@@ -783,6 +783,7 @@ void exit_rcu(void)
 	barrier();
 	t->rcu_read_unlock_special.b.blocked = true;
 	__rcu_read_unlock();
+	tasks_rcu_qs_enter(t, false);
 }
 
 #else /* #ifdef CONFIG_PREEMPT_RCU */
@@ -2597,3 +2598,63 @@ static void rcu_bind_gp_kthread(void)
 		return;
 	housekeeping_affine(current);
 }
+
+#ifdef CONFIG_TASKS_RCU
+
+DEFINE_STATIC_SRCU(tasks_srcu);
+
+/* Record a momentary RCU-tasks quiescent state. */
+void tasks_rcu_qs(bool preempt)
+{
+	int idx;
+
+	if (preempt || is_idle_task(current))
+		return;  /* Preempted, not a quiescent state. */
+	/* Acquire new before releasing old to allow tracing SRCU. */
+	preempt_disable();
+	idx = __srcu_read_lock(&tasks_srcu);
+	__srcu_read_unlock(&tasks_srcu, current->rcu_tasks_idx);
+	current->rcu_tasks_idx = idx;
+	WARN_ON_ONCE(current->rcu_tasks_qs);
+	current->rcu_tasks_qs = false;
+	preempt_enable();
+}
+
+/* Record entering an extended RCU-tasks quiescent state. */
+void tasks_rcu_qs_enter(struct task_struct *t, bool preempt)
+{
+	t->rcu_tasks_preempt = preempt;
+	if (preempt || is_idle_task(t))
+		return;  /* Preempted, not a quiescent state. */
+	preempt_disable();
+	__srcu_read_unlock(&tasks_srcu, t->rcu_tasks_idx);
+	WARN_ON_ONCE(current->rcu_tasks_qs);
+	current->rcu_tasks_qs = true;
+	preempt_enable();
+}
+
+/* Record exiting an extended RCU-tasks quiescent state. */
+void tasks_rcu_qs_exit(struct task_struct *t)
+{
+	if (t->rcu_tasks_preempt || is_idle_task(t))
+		return;  /* Preempted, not a quiescent state. */
+	preempt_disable();
+	if (current->rcu_tasks_qs)
+		t->rcu_tasks_idx = __srcu_read_lock(&tasks_srcu);
+	current->rcu_tasks_qs = false;
+	preempt_enable();
+}
+
+/**
+ * synchronize_rcu_tasks - Wait for all tasks to voluntarily leave the kernel
+ *
+ * Waits until each task is either voluntarily blocked, running in
+ * userspace, or has offered to block (as in cond_resched_rcu_qs()).
+ * Idle tasks are ignored.
+ */
+void synchronize_rcu_tasks(void)
+{
+	synchronize_srcu(&tasks_srcu);
+}
+
+#endif /* #ifdef CONFIG_TASKS_RCU */
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 75353aa53ae3..1ba79734377f 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -3430,6 +3430,7 @@ static void __sched notrace __schedule(bool preempt)
 	clear_preempt_need_resched();
 
 	if (likely(prev != next)) {
+		tasks_rcu_qs_exit(next);
 		rq->nr_switches++;
 		rq->curr = next;
 		++*switch_count;
@@ -3438,9 +3439,11 @@ static void __sched notrace __schedule(bool preempt)
 
 		/* Also unlocks the rq: */
 		rq = context_switch(rq, prev, next, &rf);
+		tasks_rcu_qs_enter(prev, preempt);
 	} else {
 		rq->clock_update_flags &= ~(RQCF_ACT_SKIP|RQCF_REQ_SKIP);
 		rq_unlock_irq(rq, &rf);
+		tasks_rcu_qs(preempt);
 	}
 
 	balance_callback(rq);

Re: Use case for TASKS_RCU

[Steven Rostedt]

On Mon, 22 May 2017 17:00:36 -0700
"Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:

> > 
> > Hmmm...  The goal is to make sure that any task that was preempted
> > or running at a given point in time passes through a voluntary
> > context switch (or userspace execution, or, ...).
> > 
> > What is the simplest way to get this job done?  To Ingo's point, I
> > bet that there is a simpler way than the current TASKS_RCU
> > implementation.
> > 
> > Ingo, if I make it fit into 100 lines of code, would you be OK with
> > it? I probably need a one-line hook at task-creation time and
> > another at task-exit time, if that makes a difference.  
> 
> And please see below for such a patch, which does add (just barely)
> fewer than 100 lines net.
> 
> Unfortunately, it does not work, as I should have known ahead of time
> from the dyntick-idle experience.  Not all context switches go through
> context_switch().  :-/

Wait. What context switch doesn't go through a context switch? Or do
you mean a user/kernel context switch?

-- Steve

> 
> I believe this is fixable, more or less like dyntick-idle's
> half-interrupts were fixable, but it will likely be a few days.  Not
> clear whether the result will be simpler than current TASKS_RCU, but
> there is only one way to find out.  ;-)
> 

Re: Use case for TASKS_RCU

[Paul E. McKenney]

On Tue, May 23, 2017 at 03:39:39PM -0400, Steven Rostedt wrote:
> On Mon, 22 May 2017 17:00:36 -0700
> "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:
> 
> > > 
> > > Hmmm...  The goal is to make sure that any task that was preempted
> > > or running at a given point in time passes through a voluntary
> > > context switch (or userspace execution, or, ...).
> > > 
> > > What is the simplest way to get this job done?  To Ingo's point, I
> > > bet that there is a simpler way than the current TASKS_RCU
> > > implementation.
> > > 
> > > Ingo, if I make it fit into 100 lines of code, would you be OK with
> > > it? I probably need a one-line hook at task-creation time and
> > > another at task-exit time, if that makes a difference.  
> > 
> > And please see below for such a patch, which does add (just barely)
> > fewer than 100 lines net.
> > 
> > Unfortunately, it does not work, as I should have known ahead of time
> > from the dyntick-idle experience.  Not all context switches go through
> > context_switch().  :-/
> 
> Wait. What context switch doesn't go through a context switch? Or do
> you mean a user/kernel context switch?

I mean that putting printk() before and after the call to context_switch()
can show tasks switching out twice without switching in and vice versa.
No sign of lost printk()s, and I also confirmed this behavior using a
flag in task_struct.

One way that this can happen on some architectures is via the "helper"
mechanism, where the task sleeps normally, but where a later interrupt
or exception takes on its context "behind the scenes" in the arch code.
This is what messed up my attempt to use a simple interrupt-nesting
counter for RCU dynticks some years back.  What I counted on there was
that the idle loop would never do that sort of thing, so I could zero
the count when entering idle from process context.

But I have not yet found a similar trick for counting voluntary
context switches.

I also tried making context_switch() look like a momentary quiescent
state, but of course that means that tasks that block forever also
block the grace period forever.  At which point, I need to scan the task
list to find them.  And that pretty much brings me back to the current
RCU-tasks implementation.  :-/

							Thanx, Paul

> -- Steve
> 
> > 
> > I believe this is fixable, more or less like dyntick-idle's
> > half-interrupts were fixable, but it will likely be a few days.  Not
> > clear whether the result will be simpler than current TASKS_RCU, but
> > there is only one way to find out.  ;-)
> > 
> 

Re: Use case for TASKS_RCU

[Steven Rostedt]

On Tue, 23 May 2017 13:00:35 -0700
"Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:

 
> > > Unfortunately, it does not work, as I should have known ahead of
> > > time from the dyntick-idle experience.  Not all context switches
> > > go through context_switch().  :-/  
> > 
> > Wait. What context switch doesn't go through a context switch? Or do
> > you mean a user/kernel context switch?  
> 
> I mean that putting printk() before and after the call to
> context_switch() can show tasks switching out twice without switching
> in and vice versa. No sign of lost printk()s, and I also confirmed
> this behavior using a flag in task_struct.

I hope you meant trace_printk()s' as printk is a huge overhead and can
cause side effects.

> 
> One way that this can happen on some architectures is via the "helper"
> mechanism, where the task sleeps normally, but where a later interrupt
> or exception takes on its context "behind the scenes" in the arch
> code. This is what messed up my attempt to use a simple
> interrupt-nesting counter for RCU dynticks some years back.  What I
> counted on there was that the idle loop would never do that sort of
> thing, so I could zero the count when entering idle from process
> context.
> 
> But I have not yet found a similar trick for counting voluntary
> context switches.
> 
> I also tried making context_switch() look like a momentary quiescent
> state, but of course that means that tasks that block forever also
> block the grace period forever.  At which point, I need to scan the
> task list to find them.  And that pretty much brings me back to the
> current RCU-tasks implementation.  :-/
> 

Nothing should block in a preempted state forever, and if it does, that
means we want to wait forever. Because it could be preempted on the
trampoline.

-- Steve

Re: Use case for TASKS_RCU

[Paul E. McKenney]

On Tue, May 23, 2017 at 04:38:53PM -0400, Steven Rostedt wrote:
> On Tue, 23 May 2017 13:00:35 -0700
> "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:
> 
> 
> > > > Unfortunately, it does not work, as I should have known ahead of
> > > > time from the dyntick-idle experience.  Not all context switches
> > > > go through context_switch().  :-/  
> > > 
> > > Wait. What context switch doesn't go through a context switch? Or do
> > > you mean a user/kernel context switch?  
> > 
> > I mean that putting printk() before and after the call to
> > context_switch() can show tasks switching out twice without switching
> > in and vice versa. No sign of lost printk()s, and I also confirmed
> > this behavior using a flag in task_struct.
> 
> I hope you meant trace_printk()s' as printk is a huge overhead and can
> cause side effects.

Not so much during boot.  But actually, I meant to ask you about that...

>From what I can see from the ftrace documentation, booting with something
like this:

ftrace=function ftrace_filter=tasks_rcu_qs,tasks_rcu_qs_enter,tasks_rcu_qs_exit

Should enable ftrace, but only on the three functions called out.
But when I try this, I get the following in dmesg:

[    1.506171] ftrace bootup tracer 'function' not registered

And I don't get anything from ftrace_dump() later on.

What am I doing wrong here?  (Event tracing has worked for me in the
past from the boot line, but I was lazy so just fell back to printk().
And I didn't think of trace_printk().)

> > One way that this can happen on some architectures is via the "helper"
> > mechanism, where the task sleeps normally, but where a later interrupt
> > or exception takes on its context "behind the scenes" in the arch
> > code. This is what messed up my attempt to use a simple
> > interrupt-nesting counter for RCU dynticks some years back.  What I
> > counted on there was that the idle loop would never do that sort of
> > thing, so I could zero the count when entering idle from process
> > context.
> > 
> > But I have not yet found a similar trick for counting voluntary
> > context switches.
> > 
> > I also tried making context_switch() look like a momentary quiescent
> > state, but of course that means that tasks that block forever also
> > block the grace period forever.  At which point, I need to scan the
> > task list to find them.  And that pretty much brings me back to the
> > current RCU-tasks implementation.  :-/
> 
> Nothing should block in a preempted state forever, and if it does, that
> means we want to wait forever. Because it could be preempted on the
> trampoline.

Blocking in a preempted state is not the problem here.  Given that
the obvious hooks don't seem to be catching all of the switch-to and
switch-from events, blocking forever in a not-preempted state is
the problem.  I either need some way to see all of the switch-from
and switch-to events (and the ways I can see to do this have patch-size
and maintainability issues), or I need to go back to scanning the
task list.

And of course, all of the approaches that update state upon context
switch are slowing down a fastpath for the benefit of a slowpath,
which is not necessarily all that good of a thing.

							Thanx, Paul

Re: Use case for TASKS_RCU

[Steven Rostedt]

On Tue, 23 May 2017 14:10:09 -0700
"Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:

> On Tue, May 23, 2017 at 04:38:53PM -0400, Steven Rostedt wrote:
> > On Tue, 23 May 2017 13:00:35 -0700
> > "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:
> > 
> >   
> > > > > Unfortunately, it does not work, as I should have known ahead
> > > > > of time from the dyntick-idle experience.  Not all context
> > > > > switches go through context_switch().  :-/    
> > > > 
> > > > Wait. What context switch doesn't go through a context switch?
> > > > Or do you mean a user/kernel context switch?    
> > > 
> > > I mean that putting printk() before and after the call to
> > > context_switch() can show tasks switching out twice without
> > > switching in and vice versa. No sign of lost printk()s, and I
> > > also confirmed this behavior using a flag in task_struct.  
> > 
> > I hope you meant trace_printk()s' as printk is a huge overhead and
> > can cause side effects.  
> 
> Not so much during boot.  But actually, I meant to ask you about
> that...
> 
> >From what I can see from the ftrace documentation, booting with
> >something  
> like this:
> 
> ftrace=function
> ftrace_filter=tasks_rcu_qs,tasks_rcu_qs_enter,tasks_rcu_qs_exit

After the machine is booted, can you make sure those exist for tracing?

 # grep rcu_qs /sys/kernel/debug/tracing/available_filter_functions

> 
> Should enable ftrace, but only on the three functions called out.
> But when I try this, I get the following in dmesg:
> 
> [    1.506171] ftrace bootup tracer 'function' not registered

Can you send me your config.

-- Steve

> 
> And I don't get anything from ftrace_dump() later on.
> 
> What am I doing wrong here?  (Event tracing has worked for me in the
> past from the boot line, but I was lazy so just fell back to printk().
> And I didn't think of trace_printk().)
> 
> > > One way that this can happen on some architectures is via the
> > > "helper" mechanism, where the task sleeps normally, but where a
> > > later interrupt or exception takes on its context "behind the
> > > scenes" in the arch code. This is what messed up my attempt to
> > > use a simple interrupt-nesting counter for RCU dynticks some
> > > years back.  What I counted on there was that the idle loop would
> > > never do that sort of thing, so I could zero the count when
> > > entering idle from process context.
> > > 
> > > But I have not yet found a similar trick for counting voluntary
> > > context switches.
> > > 
> > > I also tried making context_switch() look like a momentary
> > > quiescent state, but of course that means that tasks that block
> > > forever also block the grace period forever.  At which point, I
> > > need to scan the task list to find them.  And that pretty much
> > > brings me back to the current RCU-tasks implementation.  :-/  
> > 
> > Nothing should block in a preempted state forever, and if it does,
> > that means we want to wait forever. Because it could be preempted
> > on the trampoline.  
> 
> Blocking in a preempted state is not the problem here.  Given that
> the obvious hooks don't seem to be catching all of the switch-to and
> switch-from events, blocking forever in a not-preempted state is
> the problem.  I either need some way to see all of the switch-from
> and switch-to events (and the ways I can see to do this have
> patch-size and maintainability issues), or I need to go back to
> scanning the task list.
> 
> And of course, all of the approaches that update state upon context
> switch are slowing down a fastpath for the benefit of a slowpath,
> which is not necessarily all that good of a thing.
> 
> 							Thanx, Paul

Re: Use case for TASKS_RCU

[Paul E. McKenney]

[-- Attachment #1: Type: text/plain, Size: 4129 bytes --]

On Tue, May 23, 2017 at 07:47:20PM -0400, Steven Rostedt wrote:
> On Tue, 23 May 2017 14:10:09 -0700
> "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:
> 
> > On Tue, May 23, 2017 at 04:38:53PM -0400, Steven Rostedt wrote:
> > > On Tue, 23 May 2017 13:00:35 -0700
> > > "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:
> > > 
> > >   
> > > > > > Unfortunately, it does not work, as I should have known ahead
> > > > > > of time from the dyntick-idle experience.  Not all context
> > > > > > switches go through context_switch().  :-/    
> > > > > 
> > > > > Wait. What context switch doesn't go through a context switch?
> > > > > Or do you mean a user/kernel context switch?    
> > > > 
> > > > I mean that putting printk() before and after the call to
> > > > context_switch() can show tasks switching out twice without
> > > > switching in and vice versa. No sign of lost printk()s, and I
> > > > also confirmed this behavior using a flag in task_struct.  
> > > 
> > > I hope you meant trace_printk()s' as printk is a huge overhead and
> > > can cause side effects.  
> > 
> > Not so much during boot.  But actually, I meant to ask you about
> > that...
> > 
> > >From what I can see from the ftrace documentation, booting with
> > >something  
> > like this:
> > 
> > ftrace=function
> > ftrace_filter=tasks_rcu_qs,tasks_rcu_qs_enter,tasks_rcu_qs_exit
> 
> After the machine is booted, can you make sure those exist for tracing?
> 
>  # grep rcu_qs /sys/kernel/debug/tracing/available_filter_functions

I run out of initrd without any console input, so is there some way for
me to collect this information from within the kernel?

(If not, no biggie -- I will just need to find/build a root image.)

> > Should enable ftrace, but only on the three functions called out.
> > But when I try this, I get the following in dmesg:
> > 
> > [    1.506171] ftrace bootup tracer 'function' not registered
> 
> Can you send me your config.

Attached!

							Thanx, Paul

> -- Steve
> 
> > 
> > And I don't get anything from ftrace_dump() later on.
> > 
> > What am I doing wrong here?  (Event tracing has worked for me in the
> > past from the boot line, but I was lazy so just fell back to printk().
> > And I didn't think of trace_printk().)
> > 
> > > > One way that this can happen on some architectures is via the
> > > > "helper" mechanism, where the task sleeps normally, but where a
> > > > later interrupt or exception takes on its context "behind the
> > > > scenes" in the arch code. This is what messed up my attempt to
> > > > use a simple interrupt-nesting counter for RCU dynticks some
> > > > years back.  What I counted on there was that the idle loop would
> > > > never do that sort of thing, so I could zero the count when
> > > > entering idle from process context.
> > > > 
> > > > But I have not yet found a similar trick for counting voluntary
> > > > context switches.
> > > > 
> > > > I also tried making context_switch() look like a momentary
> > > > quiescent state, but of course that means that tasks that block
> > > > forever also block the grace period forever.  At which point, I
> > > > need to scan the task list to find them.  And that pretty much
> > > > brings me back to the current RCU-tasks implementation.  :-/  
> > > 
> > > Nothing should block in a preempted state forever, and if it does,
> > > that means we want to wait forever. Because it could be preempted
> > > on the trampoline.  
> > 
> > Blocking in a preempted state is not the problem here.  Given that
> > the obvious hooks don't seem to be catching all of the switch-to and
> > switch-from events, blocking forever in a not-preempted state is
> > the problem.  I either need some way to see all of the switch-from
> > and switch-to events (and the ways I can see to do this have
> > patch-size and maintainability issues), or I need to go back to
> > scanning the task list.
> > 
> > And of course, all of the approaches that update state upon context
> > switch are slowing down a fastpath for the benefit of a slowpath,
> > which is not necessarily all that good of a thing.
> > 
> > 							Thanx, Paul
> 

[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 112857 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 4.11.0-rc7 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
# CONFIG_CLASSIC_SRCU is not set
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_FANOUT=2
CONFIG_RCU_FANOUT_LEAF=2
CONFIG_TREE_RCU_TRACE=y
CONFIG_RCU_BOOST=y
CONFIG_RCU_KTHREAD_PRIO=2
CONFIG_RCU_BOOST_DELAY=500
# CONFIG_RCU_NOCB_CPU is not set
# CONFIG_BUILD_BIN2C is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
# CONFIG_NUMA_BALANCING is not set
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_HUGETLB is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_SOCK_CGROUP_DATA is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="/home/paulmck/public_git/linux-rcu/tools/testing/selftests/rcutorture/initrd"
CONFIG_INITRAMFS_ROOT_UID=0
CONFIG_INITRAMFS_ROOT_GID=0
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_INITRAMFS_COMPRESSION=".gz"
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_POSIX_TIMERS=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
# CONFIG_USERFAULTFD is not set
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_KEXEC_CORE=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
# CONFIG_INTEL_RDT_A is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
# CONFIG_IOSF_MBI is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_HYPERVISOR_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=16
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_MOVABLE_NODE is not set
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_X86_PMEM_LEGACY is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_EFI=y
# CONFIG_EFI_STUB is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_NATIVE is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_BGRT is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT is not set

#
# PCI host controller drivers
#
# CONFIG_VMD is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_NET_INGRESS=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
# CONFIG_NET_UDP_TUNNEL is not set
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_NV is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_ESP_OFFLOAD is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_FOU is not set
# CONFIG_IPV6_FOU_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_LOG_COMMON=m
# CONFIG_NF_LOG_NETDEV is not set
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
# CONFIG_NF_NAT_AMANDA is not set
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_REDIRECT is not set
# CONFIG_NF_TABLES is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_NAT=m
# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_SOCKET_IPV4 is not set
# CONFIG_NF_DUP_IPV4 is not set
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=y
CONFIG_NF_NAT_IPV4=m
CONFIG_NF_NAT_MASQUERADE_IPV4=m
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_MANGLE=y
# CONFIG_IP_NF_RAW is not set

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_CONNTRACK_IPV6=y
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
CONFIG_NF_REJECT_IPV6=y
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP6_NF_RAW is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
# CONFIG_NET_SCH_FQ_CODEL is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_INGRESS is not set
# CONFIG_NET_SCH_PLUG is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_SAMPLE is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
# CONFIG_CFG80211_WEXT is not set
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set

#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set

#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set

#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set

#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
CONFIG_PATA_SCH=y
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_MQ_DEFAULT is not set
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
# CONFIG_DM_RAID is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_VIRTIO_NET is not set
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_AMD_XGBE is not set
# CONFIG_AMD_XGBE_HAVE_ECC is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
CONFIG_TIGON3=y
# CONFIG_BNX2X is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_FUJITSU=y
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_FM10K is not set
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_PCMCIA_PCNET is not set
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=y
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_ALE is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XIRCOM=y
# CONFIG_PCMCIA_XIRC2PS is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y
# CONFIG_LED_TRIGGER_PHY is not set

#
# MDIO bus device drivers
#
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_OCTEON is not set
# CONFIG_MDIO_THUNDER is not set

#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AT803X_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_LAN78XX is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
# CONFIG_AIRO_CS is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=y
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_RTL8XXXU is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_ISDN is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_NOZOMI is not set
# CONFIG_ISI is not set
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_DEV_BUS is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_VIA=y
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_SCR24X is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
# CONFIG_NTP_PPS is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_DELL_SMM is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_FTSTEUTATES is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_XGENE is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# CONFIG_INTEL_PCH_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_CORE is not set
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WATCHDOG_SYSFS is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DEBUG_MM is not set
# CONFIG_DRM_DEBUG_MM_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set

#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_I915_ALPHA_SUPPORT is not set
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y
# CONFIG_DRM_I915_GVT is not set
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_TINYDRM is not set
# CONFIG_DRM_LEGACY is not set
# CONFIG_DRM_LIB_RANDOM is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SE6X is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=y
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
# CONFIG_SND_HDA_CODEC_REALTEK is not set
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_HDMI is not set
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CA0110 is not set
# CONFIG_SND_HDA_CODEC_CA0132 is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
# CONFIG_SND_HDA_GENERIC is not set
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_USB_POD is not set
# CONFIG_SND_USB_PODHD is not set
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not set
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# CONFIG_SND_SOC is not set
CONFIG_SND_X86=y
# CONFIG_HDMI_LPE_AUDIO is not set
# CONFIG_SOUND_PRIME is not set

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CMEDIA is not set
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
CONFIG_HID_GYRATION=y
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
# CONFIG_HID_LOGITECH_DJ is not set
# CONFIG_HID_LOGITECH_HIDPP is not set
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
CONFIG_LOGIWHEELS_FF=y
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NTRIG=y
# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=y
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
# CONFIG_SONY_FF is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=y
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
# CONFIG_I2C_HID is not set

#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_UCSI is not set

#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXCPLD is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV8803 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
CONFIG_HSU_DMA=y

#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_LAPTOP is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=y
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_PVPANIC is not set
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_MLX_PLATFORM is not set
# CONFIG_MLX_CPLD_PLATFORM is not set
# CONFIG_INTEL_TURBO_MAX_3 is not set
# CONFIG_SILEAD_DMI is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_NXP is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IOVA=y
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_V2 is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
# CONFIG_IRQ_REMAP is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#

#
# Broadcom SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
# CONFIG_SOC_ZTE is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_MCE_AMD_INJ is not set
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_LIBNVDIMM is not set
# CONFIG_NVMEM is not set
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set

#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set

#
# FSI support
#
# CONFIG_FSI is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
# CONFIG_EFI_DEV_PATH_PARSER is not set

#
# Tegra firmware driver
#

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_EFIVAR_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_STACK_VALIDATION is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_DEBUG_PREEMPT=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_TORTURE_TEST=y
# CONFIG_RCU_PERF_TEST is not set
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT=y
CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT_DELAY=3
CONFIG_RCU_TORTURE_TEST_SLOW_INIT=y
CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY=3
CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP=y
CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP_DELAY=3
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
# CONFIG_UPROBE_EVENTS is not set
CONFIG_PROBE_EVENTS=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_ENUM_MAP_FILE is not set

#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_MEMTEST is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_EARLY_PRINTK_EFI is not set
# CONFIG_X86_PTDUMP_CORE is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_WX is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_INTEL_TXT is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_INTEGRITY_AUDIT=y
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
# CONFIG_CRYPTO_RSA is not set
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ENGINE=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_KEYWRAP is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
# CONFIG_CRYPTO_SHA1_MB is not set
# CONFIG_CRYPTO_SHA256_MB is not set
# CONFIG_CRYPTO_SHA512_MB is not set
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
# CONFIG_ASYMMETRIC_KEY_TYPE is not set

#
# Certificates for signature checking
#
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
# CONFIG_DMA_NOOP_OPS is not set
# CONFIG_DMA_VIRT_OPS is not set
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
# CONFIG_IRQ_POLL is not set
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
CONFIG_SBITMAP=y