* [1/3] regmap: Add 1-Wire bus support
2017-06-01 6:45 [0/3] Battery monitor MAX1721x with w1-regmap and w1-slave (resend v2) Alex A. Mihaylov
@ 2017-06-01 6:45 ` Alex A. Mihaylov
2017-06-01 6:45 ` [2/3] w1: MAX1721x Stanalone Fuel Gauge - add 1-Wire slave drivers Alex A. Mihaylov
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Alex A. Mihaylov @ 2017-06-01 6:45 UTC (permalink / raw)
To: Mark Brown, Greg Kroah-Hartman, Sebastian Reichel,
Evgeniy Polyakov, linux-kernel, linux-pm
Cc: Alex A. Mihaylov
Add basic support regmap (register map access) API for 1-Wire bus
---
drivers/base/regmap/Kconfig | 6 +-
drivers/base/regmap/Makefile | 1 +
drivers/base/regmap/regmap-w1.c | 245 ++++++++++++++++++++++++++++++++++++++++
include/linux/regmap.h | 34 ++++++
4 files changed, 285 insertions(+), 1 deletion(-)
create mode 100644 drivers/base/regmap/regmap-w1.c
diff --git a/drivers/base/regmap/Kconfig b/drivers/base/regmap/Kconfig
index db9d00c36a..413af5f940 100644
--- a/drivers/base/regmap/Kconfig
+++ b/drivers/base/regmap/Kconfig
@@ -3,7 +3,7 @@
# subsystems should select the appropriate symbols.
config REGMAP
- default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ)
+ default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ)
select LZO_COMPRESS
select LZO_DECOMPRESS
select IRQ_DOMAIN if REGMAP_IRQ
@@ -24,6 +24,10 @@ config REGMAP_SPMI
tristate
depends on SPMI
+config REGMAP_W1
+ tristate
+ depends on W1
+
config REGMAP_MMIO
tristate
diff --git a/drivers/base/regmap/Makefile b/drivers/base/regmap/Makefile
index 609e4c84f4..17741ae14e 100644
--- a/drivers/base/regmap/Makefile
+++ b/drivers/base/regmap/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_REGMAP_SPI) += regmap-spi.o
obj-$(CONFIG_REGMAP_SPMI) += regmap-spmi.o
obj-$(CONFIG_REGMAP_MMIO) += regmap-mmio.o
obj-$(CONFIG_REGMAP_IRQ) += regmap-irq.o
+obj-$(CONFIG_REGMAP_W1) += regmap-w1.o
diff --git a/drivers/base/regmap/regmap-w1.c b/drivers/base/regmap/regmap-w1.c
new file mode 100644
index 0000000000..5f04e7bf06
--- /dev/null
+++ b/drivers/base/regmap/regmap-w1.c
@@ -0,0 +1,245 @@
+/*
+ * Register map access API - W1 (1-Wire) support
+ *
+ * Copyright (C) 2017 OAO Radioavionica
+ * Author: Alex A. Mihaylov <minimumlaw@rambler.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ */
+
+#include <linux/regmap.h>
+#include <linux/module.h>
+#include "../../w1/w1.h"
+
+#include "internal.h"
+
+#define W1_CMD_READ_DATA 0x69
+#define W1_CMD_WRITE_DATA 0x6C
+
+/*
+ * 1-Wire slaves registers with addess 8 bit and data 8 bit
+ */
+
+static int w1_reg_a8_v8_read(void *context, unsigned int reg, unsigned int *val)
+{
+ struct device *dev = context;
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+ int ret = 0;
+
+ if (reg > 255)
+ return -EINVAL;
+
+ mutex_lock(&sl->master->bus_mutex);
+ if (!w1_reset_select_slave(sl)) {
+ w1_write_8(sl->master, W1_CMD_READ_DATA);
+ w1_write_8(sl->master, reg);
+ *val = w1_read_8(sl->master);
+ } else {
+ ret = -ENODEV;
+ }
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return ret;
+}
+
+static int w1_reg_a8_v8_write(void *context, unsigned int reg, unsigned int val)
+{
+ struct device *dev = context;
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+ int ret = 0;
+
+ if (reg > 255)
+ return -EINVAL;
+
+ mutex_lock(&sl->master->bus_mutex);
+ if (!w1_reset_select_slave(sl)) {
+ w1_write_8(sl->master, W1_CMD_WRITE_DATA);
+ w1_write_8(sl->master, reg);
+ w1_write_8(sl->master, val);
+ } else {
+ ret = -ENODEV;
+ }
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return ret;
+}
+
+/*
+ * 1-Wire slaves registers with addess 8 bit and data 16 bit
+ */
+
+static int w1_reg_a8_v16_read(void *context, unsigned int reg,
+ unsigned int *val)
+{
+ struct device *dev = context;
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+ int ret = 0;
+
+ if (reg > 255)
+ return -EINVAL;
+
+ mutex_lock(&sl->master->bus_mutex);
+ if (!w1_reset_select_slave(sl)) {
+ w1_write_8(sl->master, W1_CMD_READ_DATA);
+ w1_write_8(sl->master, reg);
+ *val = w1_read_8(sl->master);
+ *val |= w1_read_8(sl->master)<<8;
+ } else {
+ ret = -ENODEV;
+ }
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return ret;
+}
+
+static int w1_reg_a8_v16_write(void *context, unsigned int reg,
+ unsigned int val)
+{
+ struct device *dev = context;
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+ int ret = 0;
+
+ if (reg > 255)
+ return -EINVAL;
+
+ mutex_lock(&sl->master->bus_mutex);
+ if (!w1_reset_select_slave(sl)) {
+ w1_write_8(sl->master, W1_CMD_WRITE_DATA);
+ w1_write_8(sl->master, reg);
+ w1_write_8(sl->master, val & 0x00FF);
+ w1_write_8(sl->master, val>>8 & 0x00FF);
+ } else {
+ ret = -ENODEV;
+ }
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return ret;
+}
+
+/*
+ * 1-Wire slaves registers with addess 16 bit and data 16 bit
+ */
+
+static int w1_reg_a16_v16_read(void *context, unsigned int reg,
+ unsigned int *val)
+{
+ struct device *dev = context;
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+ int ret = 0;
+
+ if (reg > 65535)
+ return -EINVAL;
+
+ mutex_lock(&sl->master->bus_mutex);
+ if (!w1_reset_select_slave(sl)) {
+ w1_write_8(sl->master, W1_CMD_READ_DATA);
+ w1_write_8(sl->master, reg & 0x00FF);
+ w1_write_8(sl->master, reg>>8 & 0x00FF);
+ *val = w1_read_8(sl->master);
+ *val |= w1_read_8(sl->master)<<8;
+ } else {
+ ret = -ENODEV;
+ }
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return ret;
+}
+
+static int w1_reg_a16_v16_write(void *context, unsigned int reg,
+ unsigned int val)
+{
+ struct device *dev = context;
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+ int ret = 0;
+
+ if (reg > 65535)
+ return -EINVAL;
+
+ mutex_lock(&sl->master->bus_mutex);
+ if (!w1_reset_select_slave(sl)) {
+ w1_write_8(sl->master, W1_CMD_WRITE_DATA);
+ w1_write_8(sl->master, reg & 0x00FF);
+ w1_write_8(sl->master, reg>>8 & 0x00FF);
+ w1_write_8(sl->master, val & 0x00FF);
+ w1_write_8(sl->master, val>>8 & 0x00FF);
+ } else {
+ ret = -ENODEV;
+ }
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return ret;
+}
+
+/*
+ * Various types of supported bus addressing
+ */
+
+static struct regmap_bus regmap_w1_bus_a8_v8 = {
+ .reg_read = w1_reg_a8_v8_read,
+ .reg_write = w1_reg_a8_v8_write,
+};
+
+static struct regmap_bus regmap_w1_bus_a8_v16 = {
+ .reg_read = w1_reg_a8_v16_read,
+ .reg_write = w1_reg_a8_v16_write,
+};
+
+static struct regmap_bus regmap_w1_bus_a16_v16 = {
+ .reg_read = w1_reg_a16_v16_read,
+ .reg_write = w1_reg_a16_v16_write,
+};
+
+static const struct regmap_bus *regmap_get_w1_bus(struct device *w1_dev,
+ const struct regmap_config *config)
+{
+ if (config->reg_bits == 8 && config->val_bits == 8)
+ return ®map_w1_bus_a8_v8;
+
+ if (config->reg_bits == 8 && config->val_bits == 16)
+ return ®map_w1_bus_a8_v16;
+
+ if (config->reg_bits == 16 && config->val_bits == 16)
+ return ®map_w1_bus_a16_v16;
+
+ return ERR_PTR(-ENOTSUPP);
+}
+
+struct regmap *__regmap_init_w1(struct device *w1_dev,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name)
+{
+
+ const struct regmap_bus *bus = regmap_get_w1_bus(w1_dev, config);
+
+ if (IS_ERR(bus))
+ return ERR_CAST(bus);
+
+ return __regmap_init(w1_dev, bus, w1_dev, config,
+ lock_key, lock_name);
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(__regmap_init_w1);
+
+struct regmap *__devm_regmap_init_w1(struct device *w1_dev,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name)
+{
+
+ const struct regmap_bus *bus = regmap_get_w1_bus(w1_dev, config);
+
+ if (IS_ERR(bus))
+ return ERR_CAST(bus);
+
+ return __devm_regmap_init(w1_dev, bus, w1_dev, config,
+ lock_key, lock_name);
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(__devm_regmap_init_w1);
+
+MODULE_LICENSE("GPL");
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index e88649225a..86eeacc142 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -461,6 +461,10 @@ struct regmap *__regmap_init_spmi_ext(struct spmi_device *dev,
const struct regmap_config *config,
struct lock_class_key *lock_key,
const char *lock_name);
+struct regmap *__regmap_init_w1(struct device *w1_dev,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name);
struct regmap *__regmap_init_mmio_clk(struct device *dev, const char *clk_id,
void __iomem *regs,
const struct regmap_config *config,
@@ -493,6 +497,10 @@ struct regmap *__devm_regmap_init_spmi_ext(struct spmi_device *dev,
const struct regmap_config *config,
struct lock_class_key *lock_key,
const char *lock_name);
+struct regmap *__devm_regmap_init_w1(struct device *w1_dev,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name);
struct regmap *__devm_regmap_init_mmio_clk(struct device *dev,
const char *clk_id,
void __iomem *regs,
@@ -597,6 +605,19 @@ int regmap_attach_dev(struct device *dev, struct regmap *map,
dev, config)
/**
+ * regmap_init_w1() - Initialise register map
+ *
+ * @w1_dev: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.
+ */
+#define regmap_init_w1(w1_dev, config) \
+ __regmap_lockdep_wrapper(__regmap_init_w1, #config, \
+ w1_dev, config)
+
+/**
* regmap_init_mmio_clk() - Initialise register map with register clock
*
* @dev: Device that will be interacted with
@@ -712,6 +733,19 @@ bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg);
dev, config)
/**
+ * devm_regmap_init_w1() - Initialise managed register map
+ *
+ * @w1_dev: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap. The regmap will be automatically freed by the
+ * device management code.
+ */
+#define devm_regmap_init_w1(w1_dev, config) \
+ __regmap_lockdep_wrapper(__devm_regmap_init_w1, #config, \
+ w1_dev, config)
+/**
* devm_regmap_init_mmio_clk() - Initialise managed register map with clock
*
* @dev: Device that will be interacted with
--
2.13.0
^ permalink raw reply related [flat|nested] 5+ messages in thread* [3/3] power: supply: Add support MAX1721x battery monitor
2017-06-01 6:45 [0/3] Battery monitor MAX1721x with w1-regmap and w1-slave (resend v2) Alex A. Mihaylov
2017-06-01 6:45 ` [1/3] regmap: Add 1-Wire bus support Alex A. Mihaylov
2017-06-01 6:45 ` [2/3] w1: MAX1721x Stanalone Fuel Gauge - add 1-Wire slave drivers Alex A. Mihaylov
@ 2017-06-01 6:45 ` Alex A. Mihaylov
2017-06-03 10:19 ` [0/3] Battery monitor MAX1721x with w1-regmap and w1-slave (resend v2) Greg Kroah-Hartman
3 siblings, 0 replies; 5+ messages in thread
From: Alex A. Mihaylov @ 2017-06-01 6:45 UTC (permalink / raw)
To: Mark Brown, Greg Kroah-Hartman, Sebastian Reichel,
Evgeniy Polyakov, linux-kernel, linux-pm
Cc: Alex A. Mihaylov
Add support for battery monitor MAX1721x (power_supply class).
Maxim Semiconductor MAX1721x Standalone Fuel Gauge battery monitor.
MAX17211 used for singlecell, MAX17215 for multicell batteryes.
---
drivers/power/supply/Kconfig | 14 ++
drivers/power/supply/Makefile | 1 +
drivers/power/supply/max1721x_battery.c | 357 ++++++++++++++++++++++++++++++++
3 files changed, 372 insertions(+)
create mode 100644 drivers/power/supply/max1721x_battery.c
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index da54ac88f0..d431d6f8aa 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -268,6 +268,20 @@ config BATTERY_MAX17042
with MAX17042. This driver also supports max17047/50 chips which are
improved version of max17042.
+config BATTERY_MAX1721X
+ tristate "MAX17211/MAX17215 standalone gas-gauge"
+ depends on W1
+ select W1_SLAVE_MAX1721X
+ select REGMAP_W1
+ help
+ MAX1721x is fuel-gauge systems for lithium-ion (Li+) batteries
+ in handheld and portable equipment. MAX17211 used with single cell
+ battery. MAX17215 designed for muticell battery. Both them have
+ 1-Wire (W1) host interface.
+
+ Say Y here to enable support for the MAX17211/MAX17215 standalone
+ battery gas-gauge.
+
config BATTERY_Z2
tristate "Z2 battery driver"
depends on I2C && MACH_ZIPIT2
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index 3789a2c06f..c785d05e02 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_CHARGER_DA9150) += da9150-charger.o
obj-$(CONFIG_BATTERY_DA9150) += da9150-fg.o
obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o
+obj-$(CONFIG_BATTERY_MAX1721X) += max1721x_battery.o
obj-$(CONFIG_BATTERY_Z2) += z2_battery.o
obj-$(CONFIG_BATTERY_RT5033) += rt5033_battery.o
obj-$(CONFIG_CHARGER_RT9455) += rt9455_charger.o
diff --git a/drivers/power/supply/max1721x_battery.c b/drivers/power/supply/max1721x_battery.c
new file mode 100644
index 0000000000..aa0effec3d
--- /dev/null
+++ b/drivers/power/supply/max1721x_battery.c
@@ -0,0 +1,357 @@
+/*
+ * 1-wire client/driver for the Maxim Semicondactor
+ * MAX17211/MAX17215 Standalone Fuel Gauge IC
+ *
+ * Copyright (C) 2017 OAO Radioavionica
+ * Author: Alex A. Mihaylov <minimumlaw@rambler.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/param.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/idr.h>
+
+#include "../../w1/w1.h"
+#include "../../w1/slaves/w1_max1721x.h"
+
+#define DEF_DEV_NAME_MAX17211 "MAX17211"
+#define DEF_DEV_NAME_MAX17215 "MAX17215"
+#define DEF_DEV_NAME_UNKNOWN "UNKNOWN"
+#define DEF_MFG_NAME "MAXIM"
+
+struct max17211_device_info {
+ struct device *dev;
+ struct power_supply *bat;
+ struct power_supply_desc bat_desc;
+ struct device *w1_dev;
+ struct regmap *regmap;
+ /* battery design format */
+ unsigned int rsense; /* in tenths uOhm */
+ char DeviceName[2 * MAX1721X_REG_DEV_NUMB + 1];
+ char ManufacturerName[2 * MAX1721X_REG_MFG_NUMB + 1];
+ char SerialNumber[13]; /* see get_sn_str() later for comment */
+};
+
+static inline struct max17211_device_info *
+to_device_info(struct power_supply *psy)
+{
+ return power_supply_get_drvdata(psy);
+}
+
+static int max1721x_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max17211_device_info *info = to_device_info(psy);
+ unsigned int reg = 0;
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ /*
+ * POWER_SUPPLY_PROP_PRESENT will always readable via
+ * sysfs interface. Value return 0 if battery not
+ * present or unaccesable via W1.
+ */
+ val->intval =
+ regmap_read(info->regmap, MAX172XX_REG_STATUS,
+ ®) ? 0 : !(reg & MAX172XX_BAT_PRESENT);
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = regmap_read(info->regmap, MAX172XX_REG_REPSOC, ®);
+ val->intval = max172xx_percent_to_ps(reg);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = regmap_read(info->regmap, MAX172XX_REG_BATT, ®);
+ val->intval = max172xx_voltage_to_ps(reg);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ ret = regmap_read(info->regmap, MAX172XX_REG_DESIGNCAP, ®);
+ val->intval = max172xx_capacity_to_ps(reg);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_AVG:
+ ret = regmap_read(info->regmap, MAX172XX_REG_REPCAP, ®);
+ val->intval = max172xx_capacity_to_ps(reg);
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+ ret = regmap_read(info->regmap, MAX172XX_REG_TTE, ®);
+ val->intval = max172xx_time_to_ps(reg);
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
+ ret = regmap_read(info->regmap, MAX172XX_REG_TTF, ®);
+ val->intval = max172xx_time_to_ps(reg);
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ ret = regmap_read(info->regmap, MAX172XX_REG_TEMP, ®);
+ val->intval = max172xx_temperature_to_ps(reg);
+ break;
+ /* We need signed current, so must cast info->rsense to signed type */
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = regmap_read(info->regmap, MAX172XX_REG_CURRENT, ®);
+ val->intval =
+ max172xx_current_to_voltage(reg) / (int)info->rsense;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ ret = regmap_read(info->regmap, MAX172XX_REG_AVGCURRENT, ®);
+ val->intval =
+ max172xx_current_to_voltage(reg) / (int)info->rsense;
+ break;
+ /*
+ * Strings already received and inited by probe.
+ * We do dummy read for check battery still available.
+ */
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ ret = regmap_read(info->regmap, MAX1721X_REG_DEV_STR, ®);
+ val->strval = info->DeviceName;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ ret = regmap_read(info->regmap, MAX1721X_REG_MFG_STR, ®);
+ val->strval = info->ManufacturerName;
+ break;
+ case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+ ret = regmap_read(info->regmap, MAX1721X_REG_SER_HEX, ®);
+ val->strval = info->SerialNumber;
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property max1721x_battery_props[] = {
+ /* int */
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_AVG,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ /* strings */
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_SERIAL_NUMBER,
+};
+
+static int get_string(struct max17211_device_info *info,
+ uint16_t reg, uint8_t nr, char *str)
+{
+ unsigned int val;
+
+ if (!str || !(reg == MAX1721X_REG_MFG_STR ||
+ reg == MAX1721X_REG_DEV_STR))
+ return -EFAULT;
+
+ while (nr--) {
+ if (regmap_read(info->regmap, reg++, &val))
+ return -EFAULT;
+ *str++ = val>>8 & 0x00FF;
+ *str++ = val & 0x00FF;
+ }
+ return 0;
+}
+
+/* Maxim say: Serial number is a hex string up to 12 hex characters */
+static int get_sn_string(struct max17211_device_info *info, char *str)
+{
+ unsigned int val[3];
+
+ if (!str)
+ return -EFAULT;
+
+ if (regmap_read(info->regmap, MAX1721X_REG_SER_HEX, &val[0]))
+ return -EFAULT;
+ if (regmap_read(info->regmap, MAX1721X_REG_SER_HEX + 1, &val[1]))
+ return -EFAULT;
+ if (regmap_read(info->regmap, MAX1721X_REG_SER_HEX + 2, &val[2]))
+ return -EFAULT;
+
+ snprintf(str, 13, "%04X%04X%04X", val[0], val[1], val[2]);
+ return 0;
+}
+
+/* Model Gauge M5 Register Memory Map access */
+static const struct regmap_range max1721x_regs_allow[] = {
+ /* M5 Model Gauge Algorithm area */
+ regmap_reg_range(0x00, 0x23),
+ regmap_reg_range(0x27, 0x2F),
+ regmap_reg_range(0x32, 0x32),
+ regmap_reg_range(0x35, 0x36),
+ regmap_reg_range(0x38, 0x3A),
+ regmap_reg_range(0x3D, 0x3F),
+ regmap_reg_range(0x42, 0x42),
+ regmap_reg_range(0x45, 0x46),
+ regmap_reg_range(0x4A, 0x4A),
+ regmap_reg_range(0x4D, 0x4D),
+ regmap_reg_range(0xB0, 0xB0),
+ regmap_reg_range(0xB4, 0xB4),
+ regmap_reg_range(0xB8, 0xBE),
+ regmap_reg_range(0xD1, 0xDA),
+ regmap_reg_range(0xDC, 0xDF),
+ /* Factory settins area */
+ regmap_reg_range(0x180, 0x1DF),
+ { }
+};
+
+static const struct regmap_range max1721x_regs_deny[] = {
+ regmap_reg_range(0x24, 0x26),
+ regmap_reg_range(0x30, 0x31),
+ regmap_reg_range(0x33, 0x34),
+ regmap_reg_range(0x37, 0x37),
+ regmap_reg_range(0x3B, 0x3C),
+ regmap_reg_range(0x40, 0x41),
+ regmap_reg_range(0x43, 0x44),
+ regmap_reg_range(0x47, 0x49),
+ regmap_reg_range(0x4B, 0x4C),
+ regmap_reg_range(0x4E, 0xAF),
+ regmap_reg_range(0xB1, 0xB3),
+ regmap_reg_range(0xB5, 0xB7),
+ regmap_reg_range(0xBF, 0xD0),
+ regmap_reg_range(0xDB, 0xDB),
+ regmap_reg_range(0xE0, 0x17F),
+ { }
+};
+
+static const struct regmap_access_table max1721x_regs = {
+ .yes_ranges = max1721x_regs_allow,
+ .n_yes_ranges = ARRAY_SIZE(max1721x_regs_allow),
+ .no_ranges = max1721x_regs_deny,
+ .n_no_ranges = ARRAY_SIZE(max1721x_regs_deny),
+};
+
+/* W1 regmap config */
+static const struct regmap_config max1721x_regmap_w1_config = {
+ .reg_bits = 16,
+ .val_bits = 16,
+ .volatile_table = &max1721x_regs,
+ .max_register = MAX1721X_MAX_REG_NR,
+};
+
+static int max1721x_battery_probe(struct platform_device *pdev)
+{
+ struct power_supply_config psy_cfg = {};
+ struct max17211_device_info *info;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, info);
+
+ info->dev = &pdev->dev;
+ info->w1_dev = pdev->dev.parent;
+ info->bat_desc.name = dev_name(&pdev->dev);
+ info->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+ info->bat_desc.properties = max1721x_battery_props;
+ info->bat_desc.num_properties = ARRAY_SIZE(max1721x_battery_props);
+ info->bat_desc.get_property = max1721x_battery_get_property;
+ /*
+ * FixMe:
+ * Device without no_thermal = true not register (err -22)
+ * Len of platform device name "max17211-battery.X.auto"
+ * more than 20 chars limit in THERMAL_NAME_LENGTH from
+ * include/uapi/linux/thermal.h
+ */
+ info->bat_desc.no_thermal = true;
+ psy_cfg.drv_data = info;
+
+ /* regmap init */
+ info->regmap = devm_regmap_init_w1(info->w1_dev,
+ &max1721x_regmap_w1_config);
+ if (IS_ERR(info->regmap)) {
+ int err = PTR_ERR(info->regmap);
+
+ dev_err(info->dev, "Failed to allocate register map: %d\n",
+ err);
+ return err;
+ }
+
+ /* rsense init */
+ info->rsense = 0;
+ if (regmap_read(info->regmap, MAX1721X_REG_NRSENSE, &info->rsense))
+
+ if (!info->rsense) {
+ dev_warn(info->dev, "RSenese not calibrated, set 10 mOhms!\n");
+ info->rsense = 1000; /* in regs in 10^-5 */
+ }
+ dev_info(info->dev, "RSense: %d mOhms.\n", info->rsense / 100);
+
+ if (get_string(info, MAX1721X_REG_MFG_STR,
+ MAX1721X_REG_MFG_NUMB, info->ManufacturerName)) {
+ dev_err(info->dev, "Can't read manufacturer. Hardware error.\n");
+ return -ENODEV;
+ }
+
+ if (!info->ManufacturerName[0])
+ strncpy(info->ManufacturerName, DEF_MFG_NAME,
+ 2 * MAX1721X_REG_MFG_NUMB);
+
+ if (get_string(info, MAX1721X_REG_DEV_STR,
+ MAX1721X_REG_DEV_NUMB, info->DeviceName)) {
+ dev_err(info->dev, "Can't read device. Hardware error.\n");
+ return -ENODEV;
+ }
+ if (!info->DeviceName[0]) {
+ unsigned int dev_name;
+
+ if (regmap_read(info->regmap,
+ MAX172XX_REG_DEVNAME, &dev_name)) {
+ dev_err(info->w1_dev, "Can't read device name reg.\n");
+ return -ENODEV;
+ }
+
+ switch (dev_name & MAX172XX_DEV_MASK) {
+ case MAX172X1_DEV:
+ strncpy(info->DeviceName, DEF_DEV_NAME_MAX17211,
+ 2 * MAX1721X_REG_DEV_NUMB);
+ break;
+ case MAX172X5_DEV:
+ strncpy(info->DeviceName, DEF_DEV_NAME_MAX17215,
+ 2 * MAX1721X_REG_DEV_NUMB);
+ break;
+ default:
+ strncpy(info->DeviceName, DEF_DEV_NAME_UNKNOWN,
+ 2 * MAX1721X_REG_DEV_NUMB);
+ }
+ }
+
+ if (get_sn_string(info, info->SerialNumber)) {
+ dev_err(info->dev, "Can't read serial. Hardware error.\n");
+ return -ENODEV;
+ }
+
+ info->bat = devm_power_supply_register(&pdev->dev, &info->bat_desc,
+ &psy_cfg);
+ if (IS_ERR(info->bat)) {
+ dev_err(info->dev, "failed to register battery\n");
+ return PTR_ERR(info->bat);
+ }
+
+ return 0;
+}
+
+static struct platform_driver max1721x_battery_driver = {
+ .driver = {
+ .name = "max1721x-battery",
+ },
+ .probe = max1721x_battery_probe,
+};
+module_platform_driver(max1721x_battery_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alex A. Mihaylov <minimumlaw@rambler.ru>");
+MODULE_DESCRIPTION("Maxim MAX17211/MAX17215 Fuel Gauage IC driver");
+MODULE_ALIAS("platform:max1721x-battery");
--
2.13.0
^ permalink raw reply related [flat|nested] 5+ messages in thread