* [PATCH] leds: Remove SEAD-3 driver
@ 2017-06-02 22:00 ` Paul Burton
0 siblings, 0 replies; 3+ messages in thread
From: Paul Burton @ 2017-06-02 22:00 UTC (permalink / raw)
To: linux-leds
Cc: Paul Burton, Jacek Anaszewski, Pavel Machek, Ralf Baechle,
Richard Purdie, linux-mips
SEAD3 is using the generic syscon & regmap based register-bit-led
driver as of commit c764583f40b8 ("MIPS: SEAD3: Use register-bit-led
driver via DT for LEDs") merged in the v4.9 cycle. As such the custom
SEAD-3 LED driver is now unused, so remove it.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: linux-leds@vger.kernel.org
Cc: linux-mips@linux-mips.org
---
drivers/leds/Kconfig | 10 ------
drivers/leds/Makefile | 1 -
drivers/leds/leds-sead3.c | 78 -----------------------------------------------
3 files changed, 89 deletions(-)
delete mode 100644 drivers/leds/leds-sead3.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 6c2999872090..1e47b9182c33 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -590,16 +590,6 @@ config LEDS_KTD2692
Say Y to enable this driver.
-config LEDS_SEAD3
- tristate "LED support for the MIPS SEAD 3 board"
- depends on LEDS_CLASS && MIPS_SEAD3
- help
- Say Y here to include support for the FLED and PLED LEDs on SEAD3 eval
- boards.
-
- This driver can also be built as a module. If so the module
- will be called leds-sead3.
-
config LEDS_IS31FL319X
tristate "LED Support for ISSI IS31FL319x I2C LED controller family"
depends on LEDS_CLASS && I2C && OF
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 45f133962ed8..8c056dd047e2 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -66,7 +66,6 @@ obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o
obj-$(CONFIG_LEDS_MENF21BMC) += leds-menf21bmc.o
obj-$(CONFIG_LEDS_KTD2692) += leds-ktd2692.o
obj-$(CONFIG_LEDS_POWERNV) += leds-powernv.o
-obj-$(CONFIG_LEDS_SEAD3) += leds-sead3.o
obj-$(CONFIG_LEDS_IS31FL319X) += leds-is31fl319x.o
obj-$(CONFIG_LEDS_IS31FL32XX) += leds-is31fl32xx.o
obj-$(CONFIG_LEDS_PM8058) += leds-pm8058.o
diff --git a/drivers/leds/leds-sead3.c b/drivers/leds/leds-sead3.c
deleted file mode 100644
index eb97a3271bb3..000000000000
--- a/drivers/leds/leds-sead3.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2015 Imagination Technologies, Inc.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <asm/mips-boards/sead3-addr.h>
-
-static void sead3_pled_set(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- writel(value, (void __iomem *)SEAD3_CPLD_P_LED);
-}
-
-static void sead3_fled_set(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- writel(value, (void __iomem *)SEAD3_CPLD_F_LED);
-}
-
-static struct led_classdev sead3_pled = {
- .name = "sead3::pled",
- .brightness_set = sead3_pled_set,
- .flags = LED_CORE_SUSPENDRESUME,
-};
-
-static struct led_classdev sead3_fled = {
- .name = "sead3::fled",
- .brightness_set = sead3_fled_set,
- .flags = LED_CORE_SUSPENDRESUME,
-};
-
-static int sead3_led_probe(struct platform_device *pdev)
-{
- int ret;
-
- ret = led_classdev_register(&pdev->dev, &sead3_pled);
- if (ret < 0)
- return ret;
-
- ret = led_classdev_register(&pdev->dev, &sead3_fled);
- if (ret < 0)
- led_classdev_unregister(&sead3_pled);
-
- return ret;
-}
-
-static int sead3_led_remove(struct platform_device *pdev)
-{
- led_classdev_unregister(&sead3_pled);
- led_classdev_unregister(&sead3_fled);
-
- return 0;
-}
-
-static struct platform_driver sead3_led_driver = {
- .probe = sead3_led_probe,
- .remove = sead3_led_remove,
- .driver = {
- .name = "sead3-led",
- },
-};
-
-module_platform_driver(sead3_led_driver);
-
-MODULE_AUTHOR("Kristian Kielhofner <kris@krisk.org>");
-MODULE_DESCRIPTION("SEAD3 LED driver");
-MODULE_LICENSE("GPL");
--
2.13.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH] leds: Remove SEAD-3 driver
@ 2017-06-02 22:00 ` Paul Burton
0 siblings, 0 replies; 3+ messages in thread
From: Paul Burton @ 2017-06-02 22:00 UTC (permalink / raw)
To: linux-leds
Cc: Paul Burton, Jacek Anaszewski, Pavel Machek, Ralf Baechle,
Richard Purdie, linux-mips
SEAD3 is using the generic syscon & regmap based register-bit-led
driver as of commit c764583f40b8 ("MIPS: SEAD3: Use register-bit-led
driver via DT for LEDs") merged in the v4.9 cycle. As such the custom
SEAD-3 LED driver is now unused, so remove it.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: linux-leds@vger.kernel.org
Cc: linux-mips@linux-mips.org
---
drivers/leds/Kconfig | 10 ------
drivers/leds/Makefile | 1 -
drivers/leds/leds-sead3.c | 78 -----------------------------------------------
3 files changed, 89 deletions(-)
delete mode 100644 drivers/leds/leds-sead3.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 6c2999872090..1e47b9182c33 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -590,16 +590,6 @@ config LEDS_KTD2692
Say Y to enable this driver.
-config LEDS_SEAD3
- tristate "LED support for the MIPS SEAD 3 board"
- depends on LEDS_CLASS && MIPS_SEAD3
- help
- Say Y here to include support for the FLED and PLED LEDs on SEAD3 eval
- boards.
-
- This driver can also be built as a module. If so the module
- will be called leds-sead3.
-
config LEDS_IS31FL319X
tristate "LED Support for ISSI IS31FL319x I2C LED controller family"
depends on LEDS_CLASS && I2C && OF
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 45f133962ed8..8c056dd047e2 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -66,7 +66,6 @@ obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o
obj-$(CONFIG_LEDS_MENF21BMC) += leds-menf21bmc.o
obj-$(CONFIG_LEDS_KTD2692) += leds-ktd2692.o
obj-$(CONFIG_LEDS_POWERNV) += leds-powernv.o
-obj-$(CONFIG_LEDS_SEAD3) += leds-sead3.o
obj-$(CONFIG_LEDS_IS31FL319X) += leds-is31fl319x.o
obj-$(CONFIG_LEDS_IS31FL32XX) += leds-is31fl32xx.o
obj-$(CONFIG_LEDS_PM8058) += leds-pm8058.o
diff --git a/drivers/leds/leds-sead3.c b/drivers/leds/leds-sead3.c
deleted file mode 100644
index eb97a3271bb3..000000000000
--- a/drivers/leds/leds-sead3.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2015 Imagination Technologies, Inc.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <asm/mips-boards/sead3-addr.h>
-
-static void sead3_pled_set(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- writel(value, (void __iomem *)SEAD3_CPLD_P_LED);
-}
-
-static void sead3_fled_set(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- writel(value, (void __iomem *)SEAD3_CPLD_F_LED);
-}
-
-static struct led_classdev sead3_pled = {
- .name = "sead3::pled",
- .brightness_set = sead3_pled_set,
- .flags = LED_CORE_SUSPENDRESUME,
-};
-
-static struct led_classdev sead3_fled = {
- .name = "sead3::fled",
- .brightness_set = sead3_fled_set,
- .flags = LED_CORE_SUSPENDRESUME,
-};
-
-static int sead3_led_probe(struct platform_device *pdev)
-{
- int ret;
-
- ret = led_classdev_register(&pdev->dev, &sead3_pled);
- if (ret < 0)
- return ret;
-
- ret = led_classdev_register(&pdev->dev, &sead3_fled);
- if (ret < 0)
- led_classdev_unregister(&sead3_pled);
-
- return ret;
-}
-
-static int sead3_led_remove(struct platform_device *pdev)
-{
- led_classdev_unregister(&sead3_pled);
- led_classdev_unregister(&sead3_fled);
-
- return 0;
-}
-
-static struct platform_driver sead3_led_driver = {
- .probe = sead3_led_probe,
- .remove = sead3_led_remove,
- .driver = {
- .name = "sead3-led",
- },
-};
-
-module_platform_driver(sead3_led_driver);
-
-MODULE_AUTHOR("Kristian Kielhofner <kris@krisk.org>");
-MODULE_DESCRIPTION("SEAD3 LED driver");
-MODULE_LICENSE("GPL");
--
2.13.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] leds: Remove SEAD-3 driver
2017-06-02 22:00 ` Paul Burton
(?)
@ 2017-06-04 18:54 ` Jacek Anaszewski
-1 siblings, 0 replies; 3+ messages in thread
From: Jacek Anaszewski @ 2017-06-04 18:54 UTC (permalink / raw)
To: Paul Burton, linux-leds
Cc: Pavel Machek, Ralf Baechle, Richard Purdie, linux-mips
Hi Paul,
On 06/03/2017 12:00 AM, Paul Burton wrote:
> SEAD3 is using the generic syscon & regmap based register-bit-led
> driver as of commit c764583f40b8 ("MIPS: SEAD3: Use register-bit-led
> driver via DT for LEDs") merged in the v4.9 cycle. As such the custom
> SEAD-3 LED driver is now unused, so remove it.
>
> Signed-off-by: Paul Burton <paul.burton@imgtec.com>
> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Cc: Richard Purdie <rpurdie@rpsys.net>
> Cc: linux-leds@vger.kernel.org
> Cc: linux-mips@linux-mips.org
>
> ---
>
> drivers/leds/Kconfig | 10 ------
> drivers/leds/Makefile | 1 -
> drivers/leds/leds-sead3.c | 78 -----------------------------------------------
> 3 files changed, 89 deletions(-)
> delete mode 100644 drivers/leds/leds-sead3.c
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 6c2999872090..1e47b9182c33 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -590,16 +590,6 @@ config LEDS_KTD2692
>
> Say Y to enable this driver.
>
> -config LEDS_SEAD3
> - tristate "LED support for the MIPS SEAD 3 board"
> - depends on LEDS_CLASS && MIPS_SEAD3
> - help
> - Say Y here to include support for the FLED and PLED LEDs on SEAD3 eval
> - boards.
> -
> - This driver can also be built as a module. If so the module
> - will be called leds-sead3.
> -
> config LEDS_IS31FL319X
> tristate "LED Support for ISSI IS31FL319x I2C LED controller family"
> depends on LEDS_CLASS && I2C && OF
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 45f133962ed8..8c056dd047e2 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -66,7 +66,6 @@ obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o
> obj-$(CONFIG_LEDS_MENF21BMC) += leds-menf21bmc.o
> obj-$(CONFIG_LEDS_KTD2692) += leds-ktd2692.o
> obj-$(CONFIG_LEDS_POWERNV) += leds-powernv.o
> -obj-$(CONFIG_LEDS_SEAD3) += leds-sead3.o
> obj-$(CONFIG_LEDS_IS31FL319X) += leds-is31fl319x.o
> obj-$(CONFIG_LEDS_IS31FL32XX) += leds-is31fl32xx.o
> obj-$(CONFIG_LEDS_PM8058) += leds-pm8058.o
> diff --git a/drivers/leds/leds-sead3.c b/drivers/leds/leds-sead3.c
> deleted file mode 100644
> index eb97a3271bb3..000000000000
> --- a/drivers/leds/leds-sead3.c
> +++ /dev/null
> @@ -1,78 +0,0 @@
> -/*
> - * This file is subject to the terms and conditions of the GNU General Public
> - * License. See the file "COPYING" in the main directory of this archive
> - * for more details.
> - *
> - * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
> - * Copyright (C) 2015 Imagination Technologies, Inc.
> - */
> -#include <linux/kernel.h>
> -#include <linux/module.h>
> -#include <linux/init.h>
> -#include <linux/platform_device.h>
> -#include <linux/leds.h>
> -#include <linux/err.h>
> -#include <linux/io.h>
> -
> -#include <asm/mips-boards/sead3-addr.h>
> -
> -static void sead3_pled_set(struct led_classdev *led_cdev,
> - enum led_brightness value)
> -{
> - writel(value, (void __iomem *)SEAD3_CPLD_P_LED);
> -}
> -
> -static void sead3_fled_set(struct led_classdev *led_cdev,
> - enum led_brightness value)
> -{
> - writel(value, (void __iomem *)SEAD3_CPLD_F_LED);
> -}
> -
> -static struct led_classdev sead3_pled = {
> - .name = "sead3::pled",
> - .brightness_set = sead3_pled_set,
> - .flags = LED_CORE_SUSPENDRESUME,
> -};
> -
> -static struct led_classdev sead3_fled = {
> - .name = "sead3::fled",
> - .brightness_set = sead3_fled_set,
> - .flags = LED_CORE_SUSPENDRESUME,
> -};
> -
> -static int sead3_led_probe(struct platform_device *pdev)
> -{
> - int ret;
> -
> - ret = led_classdev_register(&pdev->dev, &sead3_pled);
> - if (ret < 0)
> - return ret;
> -
> - ret = led_classdev_register(&pdev->dev, &sead3_fled);
> - if (ret < 0)
> - led_classdev_unregister(&sead3_pled);
> -
> - return ret;
> -}
> -
> -static int sead3_led_remove(struct platform_device *pdev)
> -{
> - led_classdev_unregister(&sead3_pled);
> - led_classdev_unregister(&sead3_fled);
> -
> - return 0;
> -}
> -
> -static struct platform_driver sead3_led_driver = {
> - .probe = sead3_led_probe,
> - .remove = sead3_led_remove,
> - .driver = {
> - .name = "sead3-led",
> - },
> -};
> -
> -module_platform_driver(sead3_led_driver);
> -
> -MODULE_AUTHOR("Kristian Kielhofner <kris@krisk.org>");
> -MODULE_DESCRIPTION("SEAD3 LED driver");
> -MODULE_LICENSE("GPL");
>
Applied, thanks.
--
Best regards,
Jacek Anaszewski
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-06-04 18:55 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-06-02 22:00 [PATCH] leds: Remove SEAD-3 driver Paul Burton
2017-06-02 22:00 ` Paul Burton
2017-06-04 18:54 ` Jacek Anaszewski
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.