From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Andrew Morton <akpm@linux-foundation.org>,
devicetree@vger.kernel.org, Fabio Estevam <fabio.estevam@nxp.com>,
kernel@pengutronix.de, Liam Girdwood <lgirdwood@gmail.com>,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org, Mark Brown <broonie@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Michael Turquette <mturquette@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Russell King <linux@armlinux.org.uk>,
Shawn Guo <shawnguo@kernel.org>,
Stephen Boyd <sboyd@codeaurora.org>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Subject: [PATCH v3 1/6] ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff property
Date: Tue, 6 Jun 2017 09:31:41 +0200 [thread overview]
Message-ID: <20170606073146.26882-2-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20170606073146.26882-1-o.rempel@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
Documentation/devicetree/bindings/clock/imx6q-clock.txt | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index 9252912a5b0e..8f93e1503e59 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -6,6 +6,14 @@ Required properties:
- interrupts: Should contain CCM interrupt
- #clock-cells: Should be <1>
+Optional properties:
+- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal
+ on power off.
+ Use this property if the SoC should be powered off by external power
+ management IC (PMIC) triggered via PMIC_STBY_REQ signal.
+ Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
+ be using "syscon-poweroff" driver instead.
+
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h
for the full list of i.MX6 Quad and DualLite clock IDs.
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Oleksij Rempel <o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: Andrew Morton
<akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Michael Turquette
<mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: Oleksij Rempel <o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Subject: [PATCH v3 1/6] ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff property
Date: Tue, 6 Jun 2017 09:31:41 +0200 [thread overview]
Message-ID: <20170606073146.26882-2-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20170606073146.26882-1-o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Oleksij Rempel <o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
Documentation/devicetree/bindings/clock/imx6q-clock.txt | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index 9252912a5b0e..8f93e1503e59 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -6,6 +6,14 @@ Required properties:
- interrupts: Should contain CCM interrupt
- #clock-cells: Should be <1>
+Optional properties:
+- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal
+ on power off.
+ Use this property if the SoC should be powered off by external power
+ management IC (PMIC) triggered via PMIC_STBY_REQ signal.
+ Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
+ be using "syscon-poweroff" driver instead.
+
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h
for the full list of i.MX6 Quad and DualLite clock IDs.
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: o.rempel@pengutronix.de (Oleksij Rempel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/6] ARM: imx6q: provide documentation for new fsl, pmic-stby-poweroff property
Date: Tue, 6 Jun 2017 09:31:41 +0200 [thread overview]
Message-ID: <20170606073146.26882-2-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20170606073146.26882-1-o.rempel@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
Documentation/devicetree/bindings/clock/imx6q-clock.txt | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index 9252912a5b0e..8f93e1503e59 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -6,6 +6,14 @@ Required properties:
- interrupts: Should contain CCM interrupt
- #clock-cells: Should be <1>
+Optional properties:
+- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal
+ on power off.
+ Use this property if the SoC should be powered off by external power
+ management IC (PMIC) triggered via PMIC_STBY_REQ signal.
+ Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
+ be using "syscon-poweroff" driver instead.
+
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h
for the full list of i.MX6 Quad and DualLite clock IDs.
--
2.11.0
next prev parent reply other threads:[~2017-06-06 7:32 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-06 7:31 [PATCH v3 0/6] provide power off support for iMX6 with external PMIC Oleksij Rempel
2017-06-06 7:31 ` Oleksij Rempel
2017-06-06 7:31 ` Oleksij Rempel [this message]
2017-06-06 7:31 ` [PATCH v3 1/6] ARM: imx6q: provide documentation for new fsl, pmic-stby-poweroff property Oleksij Rempel
2017-06-06 7:31 ` [PATCH v3 1/6] ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff property Oleksij Rempel
2017-06-09 13:29 ` Rob Herring
2017-06-09 13:29 ` Rob Herring
2017-06-06 7:31 ` [PATCH v3 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set Oleksij Rempel
2017-06-06 7:31 ` [PATCH v3 2/6] ARM: imx6: register pm_power_off handler if "fsl, pmic-stby-poweroff" " Oleksij Rempel
2017-06-06 7:31 ` [PATCH v3 3/6] kernel/reboot.c: export pm_power_off_prepare Oleksij Rempel
2017-06-06 7:31 ` Oleksij Rempel
2017-06-06 7:31 ` Oleksij Rempel
2017-06-06 7:31 ` [PATCH v3 4/6] regulator: pfuze100: add fsl,pmic-stby-poweroff property Oleksij Rempel
2017-06-06 7:31 ` [PATCH v3 4/6] regulator: pfuze100: add fsl, pmic-stby-poweroff property Oleksij Rempel
2017-06-06 7:31 ` [PATCH v3 4/6] regulator: pfuze100: add fsl,pmic-stby-poweroff property Oleksij Rempel
2017-06-09 13:32 ` Rob Herring
2017-06-09 13:32 ` Rob Herring
2017-06-09 13:32 ` Rob Herring
2017-06-06 7:31 ` [PATCH v3 5/6] regulator: pfuze100-regulator: provide pm_power_off_prepare handler Oleksij Rempel
2017-06-06 7:31 ` Oleksij Rempel
2017-06-06 7:31 ` [PATCH v3 6/6] ARM: dts: imx6: RIoTboard provide standby on power off option Oleksij Rempel
2017-06-06 7:31 ` Oleksij Rempel
2017-06-06 7:31 ` Oleksij Rempel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170606073146.26882-2-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=akpm@linux-foundation.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.