* [U-Boot] [PATCH 1/2] dt: sun8i: Perfect r_pio node of the A83T
@ 2017-06-09 13:24 Ziping Chen
2017-06-09 13:24 ` [U-Boot] [PATCH 2/2] ARM: sunxi: add support for Sinlinx SinA83T Ziping Chen
0 siblings, 1 reply; 5+ messages in thread
From: Ziping Chen @ 2017-06-09 13:24 UTC (permalink / raw)
To: u-boot
From: Ziping Chen <techping.chan@gmail.com>
Perfect `r_pio` node of the A83T based on `pio` node.
Signed-off-by: Ziping Chen <techping.chan@gmail.com>
---
arch/arm/dts/sun8i-a83t.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/dts/sun8i-a83t.dtsi b/arch/arm/dts/sun8i-a83t.dtsi
index 0fe73e173f..128fe954c4 100644
--- a/arch/arm/dts/sun8i-a83t.dtsi
+++ b/arch/arm/dts/sun8i-a83t.dtsi
@@ -257,6 +257,11 @@
compatible = "allwinner,sun8i-a83t-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #gpio-cells = <3>;
};
};
};
--
2.11.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH 2/2] ARM: sunxi: add support for Sinlinx SinA83T
2017-06-09 13:24 [U-Boot] [PATCH 1/2] dt: sun8i: Perfect r_pio node of the A83T Ziping Chen
@ 2017-06-09 13:24 ` Ziping Chen
2017-06-09 16:51 ` Maxime Ripard
0 siblings, 1 reply; 5+ messages in thread
From: Ziping Chen @ 2017-06-09 13:24 UTC (permalink / raw)
To: u-boot
From: Ziping Chen <techping.chan@gmail.com>
The SinA83T is an A83T core/daughter board combo from Sinlinx.
Add support for it.
Signed-off-by: Ziping Chen <techping.chan@gmail.com>
---
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts | 107 ++++++++++++++++++++++++++++
board/sunxi/MAINTAINERS | 6 ++
configs/Sinlinx_SinA83T_defconfig | 21 ++++++
4 files changed, 136 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts
create mode 100644 configs/Sinlinx_SinA83T_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 8b8f5e9e76..c0eae9f443 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -305,7 +305,8 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \
dtb-$(CONFIG_MACH_SUN8I_A83T) += \
sun8i-a83t-allwinner-h8homlet-v2.dtb \
sun8i-a83t-cubietruck-plus.dtb \
- sun8i-a83t-sinovoip-bpi-m3.dtb
+ sun8i-a83t-sinovoip-bpi-m3.dtb \
+ sun8i-a83t-sinlinx-sina83t.dtb
dtb-$(CONFIG_MACH_SUN8I_H3) += \
sun8i-h2-plus-orangepi-zero.dtb \
sun8i-h3-bananapi-m2-plus.dtb \
diff --git a/arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts b/arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts
new file mode 100644
index 0000000000..ae50e022d4
--- /dev/null
+++ b/arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts
@@ -0,0 +1,107 @@
+/*
+ * Copyright 2017 Ziping Chen
+ * Ziping Chen <techping.chan@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Sinlinx SinA83T";
+ compatible = "sinlinx,sina83t", "allwinner,sun8i-a83t";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usr_led {
+ label = "sinlinx:blue:usr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+ default-state = "on";
+ };
+ };
+};
+
+#define USB_CLASS_HUB 9
+
+&ehci0 {
+ /* USB 2.0 4 port hub IC */
+ status = "okay";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ hub {
+ compatible = "usb-hub";
+ usb,device-class = <USB_CLASS_HUB>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 0f1290acc0..d9370f6d63 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -299,6 +299,12 @@ S: Maintained
F: configs/Sinlinx_SinA33_defconfig
W: http://linux-sunxi.org/Sinlinx_SinA33
+SINLINX SINA83T BOARD
+M: Ziping Chen <techping.chan@gmail.com>
+S: Maintained
+F: configs/Sinlinx_SinA83T_defconfig
+W: http://linux-sunxi.org/Sinlinx_SinA83T
+
SINOVOIP BPI M2 PLUS H3 BOARD
M: Icenowy Zheng <icenowy@aosc.io>
S: Maintained
diff --git a/configs/Sinlinx_SinA83T_defconfig b/configs/Sinlinx_SinA83T_defconfig
new file mode 100644
index 0000000000..d80ac77a58
--- /dev/null
+++ b/configs/Sinlinx_SinA83T_defconfig
@@ -0,0 +1,21 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_A83T=y
+CONFIG_DRAM_CLK=600
+CONFIG_DRAM_ZQ=15355
+CONFIG_DRAM_ODT_EN=y
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_AXP_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-sinlinx-sina83t"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_AXP_DLDO4_VOLT=3300
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_MUSB_HOST=y
--
2.11.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH 2/2] ARM: sunxi: add support for Sinlinx SinA83T
2017-06-09 13:24 ` [U-Boot] [PATCH 2/2] ARM: sunxi: add support for Sinlinx SinA83T Ziping Chen
@ 2017-06-09 16:51 ` Maxime Ripard
2017-06-09 17:37 ` Ziping Chen
0 siblings, 1 reply; 5+ messages in thread
From: Maxime Ripard @ 2017-06-09 16:51 UTC (permalink / raw)
To: u-boot
Hi,
On Fri, Jun 09, 2017 at 09:24:19PM +0800, Ziping Chen wrote:
> From: Ziping Chen <techping.chan@gmail.com>
>
> The SinA83T is an A83T core/daughter board combo from Sinlinx.
>
> Add support for it.
>
> Signed-off-by: Ziping Chen <techping.chan@gmail.com>
> ---
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts | 107 ++++++++++++++++++++++++++++
> board/sunxi/MAINTAINERS | 6 ++
> configs/Sinlinx_SinA83T_defconfig | 21 ++++++
> 4 files changed, 136 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts
> create mode 100644 configs/Sinlinx_SinA83T_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 8b8f5e9e76..c0eae9f443 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -305,7 +305,8 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \
> dtb-$(CONFIG_MACH_SUN8I_A83T) += \
> sun8i-a83t-allwinner-h8homlet-v2.dtb \
> sun8i-a83t-cubietruck-plus.dtb \
> - sun8i-a83t-sinovoip-bpi-m3.dtb
> + sun8i-a83t-sinovoip-bpi-m3.dtb \
> + sun8i-a83t-sinlinx-sina83t.dtb
DT should be ordered alphabetically, so before the BPi M3.
> dtb-$(CONFIG_MACH_SUN8I_H3) += \
> sun8i-h2-plus-orangepi-zero.dtb \
> sun8i-h3-bananapi-m2-plus.dtb \
> diff --git a/arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts b/arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts
> new file mode 100644
> index 0000000000..ae50e022d4
> --- /dev/null
> +++ b/arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts
> @@ -0,0 +1,107 @@
> +/*
> + * Copyright 2017 Ziping Chen
> + * Ziping Chen <techping.chan@gmail.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "sun8i-a83t.dtsi"
> +#include "sunxi-common-regulators.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pinctrl/sun4i-a10.h>
> +
> +/ {
> + model = "Sinlinx SinA83T";
> + compatible = "sinlinx,sina83t", "allwinner,sun8i-a83t";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + usr_led {
> + label = "sinlinx:blue:usr";
> + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
> + default-state = "on";
> + };
> + };
> +};
> +
> +#define USB_CLASS_HUB 9
> +
> +&ehci0 {
> + /* USB 2.0 4 port hub IC */
> + status = "okay";
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + hub {
> + compatible = "usb-hub";
> + usb,device-class = <USB_CLASS_HUB>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&ohci0 {
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_pins_a>;
> + status = "okay";
> +};
> +
> +&usb_otg {
> + status = "okay";
> +};
Can you contribute that DT with Linux first? We share them with Linux,
and it should be accepted there first.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170609/1f740c3e/attachment.sig>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH 2/2] ARM: sunxi: add support for Sinlinx SinA83T
2017-06-09 16:51 ` Maxime Ripard
@ 2017-06-09 17:37 ` Ziping Chen
2017-06-11 7:44 ` [U-Boot] [linux-sunxi] " Jagan Teki
0 siblings, 1 reply; 5+ messages in thread
From: Ziping Chen @ 2017-06-09 17:37 UTC (permalink / raw)
To: u-boot
Previously I did not submit the patch to linux because of the missing
a83t's DT support of Linux...
And I saw Bananapi M3 haven't been supported for Linux, but for U-Boot.
Well, now I will try to fix up the a83t's DT support for Linux, and then
submitted it to uboot.
BTW, I found that the U-Boot's DT is a little different from the Linux's
DT. Sometime I should adjust the DT file slightly to make it compatible for
each other. For exmaple, Linux now uses "sun8i-h3-h5.dtsi" and
"sun8i-h3.dtsi" for a h3 device, while U-Boot only uses "sun8i-h3.dtsi".
I would like to say that it is important to keep the consistency of
U-Boot's and Linux's DT. And I am very glam to help for these works.
Thanks
Ziping Chen
On Jun 10, 2017 12:51 AM, "Maxime Ripard" <maxime.ripard@free-electrons.com>
wrote:
> Hi,
>
> On Fri, Jun 09, 2017 at 09:24:19PM +0800, Ziping Chen wrote:
> > From: Ziping Chen <techping.chan@gmail.com>
> >
> > The SinA83T is an A83T core/daughter board combo from Sinlinx.
> >
> > Add support for it.
> >
> > Signed-off-by: Ziping Chen <techping.chan@gmail.com>
> > ---
> > arch/arm/dts/Makefile | 3 +-
> > arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts | 107
> ++++++++++++++++++++++++++++
> > board/sunxi/MAINTAINERS | 6 ++
> > configs/Sinlinx_SinA83T_defconfig | 21 ++++++
> > 4 files changed, 136 insertions(+), 1 deletion(-)
> > create mode 100644 arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts
> > create mode 100644 configs/Sinlinx_SinA83T_defconfig
> >
> > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> > index 8b8f5e9e76..c0eae9f443 100644
> > --- a/arch/arm/dts/Makefile
> > +++ b/arch/arm/dts/Makefile
> > @@ -305,7 +305,8 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \
> > dtb-$(CONFIG_MACH_SUN8I_A83T) += \
> > sun8i-a83t-allwinner-h8homlet-v2.dtb \
> > sun8i-a83t-cubietruck-plus.dtb \
> > - sun8i-a83t-sinovoip-bpi-m3.dtb
> > + sun8i-a83t-sinovoip-bpi-m3.dtb \
> > + sun8i-a83t-sinlinx-sina83t.dtb
>
> DT should be ordered alphabetically, so before the BPi M3.
>
> > dtb-$(CONFIG_MACH_SUN8I_H3) += \
> > sun8i-h2-plus-orangepi-zero.dtb \
> > sun8i-h3-bananapi-m2-plus.dtb \
> > diff --git a/arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts
> b/arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts
> > new file mode 100644
> > index 0000000000..ae50e022d4
> > --- /dev/null
> > +++ b/arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts
> > @@ -0,0 +1,107 @@
> > +/*
> > + * Copyright 2017 Ziping Chen
> > + * Ziping Chen <techping.chan@gmail.com>
> > + *
> > + * This file is dual-licensed: you can use it either under the terms
> > + * of the GPL or the X11 license, at your option. Note that this dual
> > + * licensing only applies to this file, and not this project as a
> > + * whole.
> > + *
> > + * a) This file is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> the
> > + * License, or (at your option) any later version.
> > + *
> > + * This file is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * Or, alternatively,
> > + *
> > + * b) Permission is hereby granted, free of charge, to any person
> > + * obtaining a copy of this software and associated documentation
> > + * files (the "Software"), to deal in the Software without
> > + * restriction, including without limitation the rights to use,
> > + * copy, modify, merge, publish, distribute, sublicense, and/or
> > + * sell copies of the Software, and to permit persons to whom the
> > + * Software is furnished to do so, subject to the following
> > + * conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be
> > + * included in all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > + * OTHER DEALINGS IN THE SOFTWARE.
> > + */
> > +
> > +/dts-v1/;
> > +#include "sun8i-a83t.dtsi"
> > +#include "sunxi-common-regulators.dtsi"
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/input/input.h>
> > +#include <dt-bindings/pinctrl/sun4i-a10.h>
> > +
> > +/ {
> > + model = "Sinlinx SinA83T";
> > + compatible = "sinlinx,sina83t", "allwinner,sun8i-a83t";
> > +
> > + aliases {
> > + serial0 = &uart0;
> > + };
> > +
> > + chosen {
> > + stdout-path = "serial0:115200n8";
> > + };
> > +
> > + leds {
> > + compatible = "gpio-leds";
> > +
> > + usr_led {
> > + label = "sinlinx:blue:usr";
> > + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
> > + default-state = "on";
> > + };
> > + };
> > +};
> > +
> > +#define USB_CLASS_HUB 9
> > +
> > +&ehci0 {
> > + /* USB 2.0 4 port hub IC */
> > + status = "okay";
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + hub {
> > + compatible = "usb-hub";
> > + usb,device-class = <USB_CLASS_HUB>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > +};
> > +
> > +&ehci1 {
> > + status = "okay";
> > +};
> > +
> > +&ohci0 {
> > + status = "okay";
> > +};
> > +
> > +&uart0 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&uart0_pins_a>;
> > + status = "okay";
> > +};
> > +
> > +&usb_otg {
> > + status = "okay";
> > +};
>
> Can you contribute that DT with Linux first? We share them with Linux,
> and it should be accepted there first.
>
> Thanks!
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [linux-sunxi] Re: [PATCH 2/2] ARM: sunxi: add support for Sinlinx SinA83T
2017-06-09 17:37 ` Ziping Chen
@ 2017-06-11 7:44 ` Jagan Teki
0 siblings, 0 replies; 5+ messages in thread
From: Jagan Teki @ 2017-06-11 7:44 UTC (permalink / raw)
To: u-boot
On Friday 09 June 2017 11:07 PM, Ziping Chen wrote:
> Previously I did not submit the patch to linux because of the missing
> a83t's DT support of Linux...
> And I saw Bananapi M3 haven't been supported for Linux, but for U-Boot.
U-Boot has BPI M3, configs/Sinovoip_BPI_M3_defconfig
>
> Well, now I will try to fix up the a83t's DT support for Linux, and then
> submitted it to uboot.
>
> BTW, I found that the U-Boot's DT is a little different from the Linux's
> DT. Sometime I should adjust the DT file slightly to make it compatible
> for each other. For exmaple, Linux now uses "sun8i-h3-h5.dtsi" and
> "sun8i-h3.dtsi" for a h3 device, while U-Boot only uses "sun8i-h3.dtsi".
Yes, we did some recent addition sun50i-h5.dtsi ie in-line with Linux.
So more can add anytime to sync with Linux.
Jagan.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-06-11 7:44 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-06-09 13:24 [U-Boot] [PATCH 1/2] dt: sun8i: Perfect r_pio node of the A83T Ziping Chen
2017-06-09 13:24 ` [U-Boot] [PATCH 2/2] ARM: sunxi: add support for Sinlinx SinA83T Ziping Chen
2017-06-09 16:51 ` Maxime Ripard
2017-06-09 17:37 ` Ziping Chen
2017-06-11 7:44 ` [U-Boot] [linux-sunxi] " Jagan Teki
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.